Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

1 files changed, 25 insertions, 9 deletions

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index f8ed4f621f7f..ec1a71ac65f2 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -111,6 +111,8 @@ struct ieee80211_bss {
 	size_t supp_rates_len;
 	struct ieee80211_rate *beacon_rate;
 
+	u32 vht_cap_info;
+
 	/*
 	 * During association, we save an ERP value from a probe response so
 	 * that we can feed ERP info to the driver when handling the
@@ -267,7 +269,7 @@ struct probe_resp {
 	struct rcu_head rcu_head;
 	int len;
 	u16 csa_counter_offsets[IEEE80211_MAX_CSA_COUNTERS_NUM];
-	u8 data[0];
+	u8 data[];
 };
 
 struct ps_data {
@@ -450,8 +452,6 @@ struct ieee80211_if_managed {
 
 	u8 bssid[ETH_ALEN] __aligned(2);
 
-	u16 aid;
-
 	bool powersave; /* powersave requested for this iface */
 	bool broken_ap; /* AP is broken -- turn off powersave */
 	bool have_beacon;
@@ -964,6 +964,10 @@ struct ieee80211_sub_if_data {
 	bool rc_has_vht_mcs_mask[NUM_NL80211_BANDS];
 	u16 rc_rateidx_vht_mcs_mask[NUM_NL80211_BANDS][NL80211_VHT_NSS_MAX];
 
+	/* Beacon frame (non-MCS) rate (as a bitmap) */
+	u32 beacon_rateidx_mask[NUM_NL80211_BANDS];
+	bool beacon_rate_set;
+
 	union {
 		struct ieee80211_if_ap ap;
 		struct ieee80211_if_wds wds;
@@ -1169,7 +1173,8 @@ struct ieee80211_local {
 	/* number of interfaces with corresponding FIF_ flags */
 	int fif_fcsfail, fif_plcpfail, fif_control, fif_other_bss, fif_pspoll,
 	    fif_probe_req;
-	int probe_req_reg;
+	bool probe_req_reg;
+	bool rx_mcast_action_reg;
 	unsigned int filter_flags; /* FIF_* */
 
 	bool wiphy_ciphers_allocated;
@@ -1491,6 +1496,7 @@ struct ieee802_11_elems {
 	const struct ieee80211_he_operation *he_operation;
 	const struct ieee80211_he_spr *he_spr;
 	const struct ieee80211_mu_edca_param_set *mu_edca_param_set;
+	const struct ieee80211_he_6ghz_capa *he_6ghz_capa;
 	const u8 *uora_element;
 	const u8 *mesh_id;
 	const u8 *peering;
@@ -1780,7 +1786,8 @@ netdev_tx_t ieee80211_subif_start_xmit_8023(struct sk_buff *skb,
 void __ieee80211_subif_start_xmit(struct sk_buff *skb,
 				  struct net_device *dev,
 				  u32 info_flags,
-				  u32 ctrl_flags);
+				  u32 ctrl_flags,
+				  u64 *cookie);
 void ieee80211_purge_tx_queue(struct ieee80211_hw *hw,
 			      struct sk_buff_head *skbs);
 struct sk_buff *
@@ -1797,7 +1804,8 @@ void ieee80211_check_fast_xmit_iface(struct ieee80211_sub_if_data *sdata);
 void ieee80211_clear_fast_xmit(struct sta_info *sta);
 int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev,
 			      const u8 *buf, size_t len,
-			      const u8 *dest, __be16 proto, bool unencrypted);
+			      const u8 *dest, __be16 proto, bool unencrypted,
+			      u64 *cookie);
 int ieee80211_probe_mesh_link(struct wiphy *wiphy, struct net_device *dev,
 			      const u8 *buf, size_t len);
 
@@ -1891,6 +1899,7 @@ void
 ieee80211_he_cap_ie_to_sta_he_cap(struct ieee80211_sub_if_data *sdata,
 				  struct ieee80211_supported_band *sband,
 				  const u8 *he_cap_ie, u8 he_cap_len,
+				  const struct ieee80211_he_6ghz_capa *he_6ghz_capa,
 				  struct sta_info *sta);
 void
 ieee80211_he_spr_ie_to_bss_conf(struct ieee80211_vif *vif,
@@ -1909,6 +1918,7 @@ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
  * @sdata: the sdata of the interface which has received the frame
  * @elems: parsed 802.11 elements received with the frame
  * @current_band: indicates the current band
+ * @vht_cap_info: VHT capabilities of the transmitter
  * @sta_flags: contains information about own capabilities and restrictions
  *	to decide which channel switch announcements can be accepted. Only the
  *	following subset of &enum ieee80211_sta_flags are evaluated:
@@ -1923,6 +1933,7 @@ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
 int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
 				 struct ieee802_11_elems *elems,
 				 enum nl80211_band current_band,
+				 u32 vht_cap_info,
 				 u32 sta_flags, u8 *bssid,
 				 struct ieee80211_csa_ie *csa_ie);
 
@@ -2133,7 +2144,7 @@ enum {
 	IEEE80211_PROBE_FLAG_RANDOM_SN		= BIT(2),
 };
 
-int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
+int ieee80211_build_preq_ies(struct ieee80211_sub_if_data *sdata, u8 *buffer,
 			     size_t buffer_len,
 			     struct ieee80211_scan_ies *ie_desc,
 			     const u8 *ie, size_t ie_len,
@@ -2171,7 +2182,9 @@ u8 ieee80211_ie_len_he_cap(struct ieee80211_sub_if_data *sdata, u8 iftype);
 u8 *ieee80211_ie_build_he_cap(u8 *pos,
 			      const struct ieee80211_sta_he_cap *he_cap,
 			      u8 *end);
-u8 *ieee80211_ie_build_he_oper(u8 *pos);
+void ieee80211_ie_build_he_6ghz_cap(struct ieee80211_sub_if_data *sdata,
+				    struct sk_buff *skb);
+u8 *ieee80211_ie_build_he_oper(u8 *pos, struct cfg80211_chan_def *chandef);
 int ieee80211_parse_bitrates(struct cfg80211_chan_def *chandef,
 			     const struct ieee80211_supported_band *sband,
 			     const u8 *srates, int srates_len, u32 *rates);
@@ -2186,10 +2199,13 @@ u8 *ieee80211_add_wmm_info_ie(u8 *buf, u8 qosinfo);
 /* channel management */
 bool ieee80211_chandef_ht_oper(const struct ieee80211_ht_operation *ht_oper,
 			       struct cfg80211_chan_def *chandef);
-bool ieee80211_chandef_vht_oper(struct ieee80211_hw *hw,
+bool ieee80211_chandef_vht_oper(struct ieee80211_hw *hw, u32 vht_cap_info,
 				const struct ieee80211_vht_operation *oper,
 				const struct ieee80211_ht_operation *htop,
 				struct cfg80211_chan_def *chandef);
+bool ieee80211_chandef_he_6ghz_oper(struct ieee80211_sub_if_data *sdata,
+				    const struct ieee80211_he_operation *he_oper,
+				    struct cfg80211_chan_def *chandef);
 u32 ieee80211_chandef_downgrade(struct cfg80211_chan_def *c);
 
 int __must_check