summaryrefslogtreecommitdiffstats
path: root/net/mac80211/main.c
diff options
context:
space:
mode:
authorKan Yan <kyan@google.com>2019-11-19 07:06:09 +0100
committerJohannes Berg <johannes.berg@intel.com>2019-11-22 13:36:25 +0100
commit3ace10f5b5ad94bdbd4b419dc9da2217d57720a9 (patch)
tree437fd6f9e7afd316c36e4623e580dc51393847cc /net/mac80211/main.c
parentmac80211: Import airtime calculation code from mt76 (diff)
downloadlinux-3ace10f5b5ad94bdbd4b419dc9da2217d57720a9.tar.xz
linux-3ace10f5b5ad94bdbd4b419dc9da2217d57720a9.zip
mac80211: Implement Airtime-based Queue Limit (AQL)
In order for the Fq_CoDel algorithm integrated in mac80211 layer to operate effectively to control excessive queueing latency, the CoDel algorithm requires an accurate measure of how long packets stays in the queue, AKA sojourn time. The sojourn time measured at the mac80211 layer doesn't include queueing latency in the lower layer (firmware/hardware) and CoDel expects lower layer to have a short queue. However, most 802.11ac chipsets offload tasks such TX aggregation to firmware or hardware, thus have a deep lower layer queue. Without a mechanism to control the lower layer queue size, packets only stay in mac80211 layer transiently before being sent to firmware queue. As a result, the sojourn time measured by CoDel in the mac80211 layer is almost always lower than the CoDel latency target, hence CoDel does little to control the latency, even when the lower layer queue causes excessive latency. The Byte Queue Limits (BQL) mechanism is commonly used to address the similar issue with wired network interface. However, this method cannot be applied directly to the wireless network interface. "Bytes" is not a suitable measure of queue depth in the wireless network, as the data rate can vary dramatically from station to station in the same network, from a few Mbps to over Gbps. This patch implements an Airtime-based Queue Limit (AQL) to make CoDel work effectively with wireless drivers that utilized firmware/hardware offloading. AQL allows each txq to release just enough packets to the lower layer to form 1-2 large aggregations to keep hardware fully utilized and retains the rest of the frames in mac80211 layer to be controlled by the CoDel algorithm. Signed-off-by: Kan Yan <kyan@google.com> [ Toke: Keep API to set pending airtime internal, fix nits in commit msg ] Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20191119060610.76681-4-kyan@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Diffstat (limited to 'net/mac80211/main.c')
-rw-r--r--net/mac80211/main.c10
1 files changed, 9 insertions, 1 deletions
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 2d05c4cfaf6d..6cca0853f183 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -667,8 +667,16 @@ struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len,
for (i = 0; i < IEEE80211_NUM_ACS; i++) {
INIT_LIST_HEAD(&local->active_txqs[i]);
spin_lock_init(&local->active_txq_lock[i]);
+ local->aql_txq_limit_low[i] = IEEE80211_DEFAULT_AQL_TXQ_LIMIT_L;
+ local->aql_txq_limit_high[i] =
+ IEEE80211_DEFAULT_AQL_TXQ_LIMIT_H;
}
- local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX;
+
+ local->airtime_flags = AIRTIME_USE_TX |
+ AIRTIME_USE_RX |
+ AIRTIME_USE_AQL;
+ local->aql_threshold = IEEE80211_AQL_THRESHOLD;
+ atomic_set(&local->aql_total_pending_airtime, 0);
INIT_LIST_HEAD(&local->chanctx_list);
mutex_init(&local->chanctx_mtx);