mac80211: add an intermediate software queue implementation

This allows drivers to request per-vif and per-sta-tid queues from which
they can pull frames. This makes it easier to keep the hardware queues
short, and to improve fairness between clients and vifs.

The task of scheduling packet transmission is left up to the driver -
queueing is controlled by mac80211. Drivers can only dequeue packets by
calling ieee80211_tx_dequeue. This makes it possible to add active queue
management later without changing drivers using this code.

This can also be used as a starting point to implement A-MSDU
aggregation in a way that does not add artificially induced latency.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
[resolved minor context conflict, minor changes, endian annotations]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

1 files changed, 75 insertions, 8 deletions

diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 81cc499fa4a9..12971b71d0fa 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -106,6 +106,16 @@ static void __cleanup_single_sta(struct sta_info *sta)
 		atomic_dec(&ps->num_sta_ps);
 	}
 
+	if (sta->sta.txq[0]) {
+		for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) {
+			struct txq_info *txqi = to_txq_info(sta->sta.txq[i]);
+			int n = skb_queue_len(&txqi->queue);
+
+			ieee80211_purge_tx_queue(&local->hw, &txqi->queue);
+			atomic_sub(n, &sdata->txqs_len[txqi->txq.ac]);
+		}
+	}
+
 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
 		local->total_ps_buffered -= skb_queue_len(&sta->ps_tx_buf[ac]);
 		ieee80211_purge_tx_queue(&local->hw, &sta->ps_tx_buf[ac]);
@@ -218,6 +228,8 @@ void sta_info_free(struct ieee80211_local *local, struct sta_info *sta)
 
 	sta_dbg(sta->sdata, "Destroyed STA %pM\n", sta->sta.addr);
 
+	if (sta->sta.txq[0])
+		kfree(to_txq_info(sta->sta.txq[0]));
 	kfree(rcu_dereference_raw(sta->sta.rates));
 	kfree(sta);
 }
@@ -268,11 +280,12 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 				const u8 *addr, gfp_t gfp)
 {
 	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_hw *hw = &local->hw;
 	struct sta_info *sta;
 	struct timespec uptime;
 	int i;
 
-	sta = kzalloc(sizeof(*sta) + local->hw.sta_data_size, gfp);
+	sta = kzalloc(sizeof(*sta) + hw->sta_data_size, gfp);
 	if (!sta)
 		return NULL;
 
@@ -304,11 +317,25 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 	for (i = 0; i < ARRAY_SIZE(sta->chain_signal_avg); i++)
 		ewma_init(&sta->chain_signal_avg[i], 1024, 8);
 
-	if (sta_prepare_rate_control(local, sta, gfp)) {
-		kfree(sta);
-		return NULL;
+	if (local->ops->wake_tx_queue) {
+		void *txq_data;
+		int size = sizeof(struct txq_info) +
+			   ALIGN(hw->txq_data_size, sizeof(void *));
+
+		txq_data = kcalloc(ARRAY_SIZE(sta->sta.txq), size, gfp);
+		if (!txq_data)
+			goto free;
+
+		for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) {
+			struct txq_info *txq = txq_data + i * size;
+
+			ieee80211_init_tx_queue(sdata, sta, txq, i);
+		}
 	}
 
+	if (sta_prepare_rate_control(local, sta, gfp))
+		goto free_txq;
+
 	for (i = 0; i < IEEE80211_NUM_TIDS; i++) {
 		/*
 		 * timer_to_tid must be initialized with identity mapping
@@ -329,7 +356,7 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 	if (sdata->vif.type == NL80211_IFTYPE_AP ||
 	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
 		struct ieee80211_supported_band *sband =
-			local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)];
+			hw->wiphy->bands[ieee80211_get_sdata_band(sdata)];
 		u8 smps = (sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >>
 				IEEE80211_HT_CAP_SM_PS_SHIFT;
 		/*
@@ -354,6 +381,13 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 	sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr);
 
 	return sta;
+
+free_txq:
+	if (sta->sta.txq[0])
+		kfree(to_txq_info(sta->sta.txq[0]));
+free:
+	kfree(sta);
+	return NULL;
 }
 
 static int sta_info_insert_check(struct sta_info *sta)
@@ -623,6 +657,8 @@ static void __sta_info_recalc_tim(struct sta_info *sta, bool ignore_pending)
 
 		indicate_tim |=
 			sta->driver_buffered_tids & tids;
+		indicate_tim |=
+			sta->txq_buffered_tids & tids;
 	}
 
  done:
@@ -1072,7 +1108,7 @@ void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
 	struct ieee80211_local *local = sdata->local;
 	struct sk_buff_head pending;
-	int filtered = 0, buffered = 0, ac;
+	int filtered = 0, buffered = 0, ac, i;
 	unsigned long flags;
 	struct ps_data *ps;
 
@@ -1091,10 +1127,22 @@ void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
 
 	BUILD_BUG_ON(BITS_TO_LONGS(IEEE80211_NUM_TIDS) > 1);
 	sta->driver_buffered_tids = 0;
+	sta->txq_buffered_tids = 0;
 
 	if (!(local->hw.flags & IEEE80211_HW_AP_LINK_PS))
 		drv_sta_notify(local, sdata, STA_NOTIFY_AWAKE, &sta->sta);
 
+	if (sta->sta.txq[0]) {
+		for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) {
+			struct txq_info *txqi = to_txq_info(sta->sta.txq[i]);
+
+			if (!skb_queue_len(&txqi->queue))
+				continue;
+
+			drv_wake_tx_queue(local, txqi);
+		}
+	}
+
 	skb_queue_head_init(&pending);
 
 	/* sync with ieee80211_tx_h_unicast_ps_buf */
@@ -1276,8 +1324,10 @@ ieee80211_sta_ps_deliver_response(struct sta_info *sta,
 		/* if we already have frames from software, then we can't also
 		 * release from hardware queues
 		 */
-		if (skb_queue_empty(&frames))
+		if (skb_queue_empty(&frames)) {
 			driver_release_tids |= sta->driver_buffered_tids & tids;
+			driver_release_tids |= sta->txq_buffered_tids & tids;
+		}
 
 		if (driver_release_tids) {
 			/* If the driver has data on more than one TID then
@@ -1448,6 +1498,9 @@ ieee80211_sta_ps_deliver_response(struct sta_info *sta,
 
 		sta_info_recalc_tim(sta);
 	} else {
+		unsigned long tids = sta->txq_buffered_tids & driver_release_tids;
+		int tid;
+
 		/*
 		 * We need to release a frame that is buffered somewhere in the
 		 * driver ... it'll have to handle that.
@@ -1467,8 +1520,22 @@ ieee80211_sta_ps_deliver_response(struct sta_info *sta,
 		 * that the TID(s) became empty before returning here from the
 		 * release function.
 		 * Either way, however, when the driver tells us that the TID(s)
-		 * became empty we'll do the TIM recalculation.
+		 * became empty or we find that a txq became empty, we'll do the
+		 * TIM recalculation.
 		 */
+
+		if (!sta->sta.txq[0])
+			return;
+
+		for (tid = 0; tid < ARRAY_SIZE(sta->sta.txq); tid++) {
+			struct txq_info *txqi = to_txq_info(sta->sta.txq[tid]);
+
+			if (!(tids & BIT(tid)) || skb_queue_len(&txqi->queue))
+				continue;
+
+			sta_info_recalc_tim(sta);
+			break;
+		}
 	}
 }