diff options
author | Paul Gortmaker <paul.gortmaker@windriver.com> | 2013-01-31 03:50:08 +0100 |
---|---|---|
committer | Paul Gortmaker <paul.gortmaker@windriver.com> | 2013-02-01 01:56:35 +0100 |
commit | 6fcdf4facb85e7d54ff6195378dd2ba8e0baccc4 (patch) | |
tree | 97220d3bf7c93be60bb805e4c8e149a96f11f91d /net/wanrouter | |
parent | wanrouter: completely decouple obsolete code from kernel. (diff) | |
download | linux-6fcdf4facb85e7d54ff6195378dd2ba8e0baccc4.tar.xz linux-6fcdf4facb85e7d54ff6195378dd2ba8e0baccc4.zip |
wanrouter: delete now orphaned header content, files/drivers
The wanrouter support was identified earlier as unused for years,
and so the previous commit totally decoupled it from the kernel,
leaving the related wanrouter files present, but totally inert.
Here we take the final step in that cleanup, by doing a wholesale
removal of these files. The two step process is used so that the
large deletion is decoupled from the git history of files that we
still care about.
The drivers deleted here all were dependent on the Kconfig setting
CONFIG_WAN_ROUTER_DRIVERS.
A stub wanrouter.h header (kernel & uapi) are left behind so that
drivers/isdn/i4l/isdn_x25iface.c continues to compile, and so that
we don't accidentally break userspace that expected these defines.
Cc: Joe Perches <joe@perches.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Diffstat (limited to 'net/wanrouter')
-rw-r--r-- | net/wanrouter/Kconfig | 27 | ||||
-rw-r--r-- | net/wanrouter/Makefile | 7 | ||||
-rw-r--r-- | net/wanrouter/patchlevel | 1 | ||||
-rw-r--r-- | net/wanrouter/wanmain.c | 782 | ||||
-rw-r--r-- | net/wanrouter/wanproc.c | 380 |
5 files changed, 0 insertions, 1197 deletions
diff --git a/net/wanrouter/Kconfig b/net/wanrouter/Kconfig deleted file mode 100644 index a157a2e64e18..000000000000 --- a/net/wanrouter/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -# -# Configuration for WAN router -# - -config WAN_ROUTER - tristate "WAN router (DEPRECATED)" - depends on EXPERIMENTAL - ---help--- - Wide Area Networks (WANs), such as X.25, frame relay and leased - lines, are used to interconnect Local Area Networks (LANs) over vast - distances with data transfer rates significantly higher than those - achievable with commonly used asynchronous modem connections. - Usually, a quite expensive external device called a `WAN router' is - needed to connect to a WAN. - - As an alternative, WAN routing can be built into the Linux kernel. - With relatively inexpensive WAN interface cards available on the - market, a perfectly usable router can be built for less than half - the price of an external router. If you have one of those cards and - wish to use your Linux box as a WAN router, say Y here and also to - the WAN driver for your card, below. You will then need the - wan-tools package which is available from <ftp://ftp.sangoma.com/>. - - To compile WAN routing support as a module, choose M here: the - module will be called wanrouter. - - If unsure, say N. diff --git a/net/wanrouter/Makefile b/net/wanrouter/Makefile deleted file mode 100644 index 4da14bc48078..000000000000 --- a/net/wanrouter/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the Linux WAN router layer. -# - -obj-$(CONFIG_WAN_ROUTER) += wanrouter.o - -wanrouter-y := wanproc.o wanmain.o diff --git a/net/wanrouter/patchlevel b/net/wanrouter/patchlevel deleted file mode 100644 index c043eea7767e..000000000000 --- a/net/wanrouter/patchlevel +++ /dev/null @@ -1 +0,0 @@ -2.2.1 diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c deleted file mode 100644 index 2ab785064b7e..000000000000 --- a/net/wanrouter/wanmain.c +++ /dev/null @@ -1,782 +0,0 @@ -/***************************************************************************** -* wanmain.c WAN Multiprotocol Router Module. Main code. -* -* This module is completely hardware-independent and provides -* the following common services for the WAN Link Drivers: -* o WAN device management (registering, unregistering) -* o Network interface management -* o Physical connection management (dial-up, incoming calls) -* o Logical connection management (switched virtual circuits) -* o Protocol encapsulation/decapsulation -* -* Author: Gideon Hack -* -* Copyright: (c) 1995-1999 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Nov 24, 2000 Nenad Corbic Updated for 2.4.X kernels -* Nov 07, 2000 Nenad Corbic Fixed the Mulit-Port PPP for kernels 2.2.16 and -* greater. -* Aug 2, 2000 Nenad Corbic Block the Multi-Port PPP from running on -* kernels 2.2.16 or greater. The SyncPPP -* has changed. -* Jul 13, 2000 Nenad Corbic Added SyncPPP support -* Added extra debugging in device_setup(). -* Oct 01, 1999 Gideon Hack Update for s514 PCI card -* Dec 27, 1996 Gene Kozin Initial version (based on Sangoma's WANPIPE) -* Jan 16, 1997 Gene Kozin router_devlist made public -* Jan 31, 1997 Alan Cox Hacked it about a bit for 2.1 -* Jun 27, 1997 Alan Cox realigned with vendor code -* Oct 15, 1997 Farhan Thawar changed wan_encapsulate to add a pad byte of 0 -* Apr 20, 1998 Alan Cox Fixed 2.1 symbols -* May 17, 1998 K. Baranowski Fixed SNAP encapsulation in wan_encapsulate -* Dec 15, 1998 Arnaldo Melo support for firmwares of up to 128000 bytes -* check wandev->setup return value -* Dec 22, 1998 Arnaldo Melo vmalloc/vfree used in device_setup to allocate -* kernel memory and copy configuration data to -* kernel space (for big firmwares) -* Jun 02, 1999 Gideon Hack Updates for Linux 2.0.X and 2.2.X kernels. -*****************************************************************************/ - -#include <linux/stddef.h> /* offsetof(), etc. */ -#include <linux/capability.h> -#include <linux/errno.h> /* return codes */ -#include <linux/kernel.h> -#include <linux/module.h> /* support for loadable modules */ -#include <linux/slab.h> /* kmalloc(), kfree() */ -#include <linux/mutex.h> -#include <linux/mm.h> -#include <linux/string.h> /* inline mem*, str* functions */ - -#include <asm/byteorder.h> /* htons(), etc. */ -#include <linux/wanrouter.h> /* WAN router API definitions */ - -#include <linux/vmalloc.h> /* vmalloc, vfree */ -#include <asm/uaccess.h> /* copy_to/from_user */ -#include <linux/init.h> /* __initfunc et al. */ - -#define DEV_TO_SLAVE(dev) (*((struct net_device **)netdev_priv(dev))) - -/* - * Function Prototypes - */ - -/* - * WAN device IOCTL handlers - */ - -static DEFINE_MUTEX(wanrouter_mutex); -static int wanrouter_device_setup(struct wan_device *wandev, - wandev_conf_t __user *u_conf); -static int wanrouter_device_stat(struct wan_device *wandev, - wandev_stat_t __user *u_stat); -static int wanrouter_device_shutdown(struct wan_device *wandev); -static int wanrouter_device_new_if(struct wan_device *wandev, - wanif_conf_t __user *u_conf); -static int wanrouter_device_del_if(struct wan_device *wandev, - char __user *u_name); - -/* - * Miscellaneous - */ - -static struct wan_device *wanrouter_find_device(char *name); -static int wanrouter_delete_interface(struct wan_device *wandev, char *name); -static void lock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) - __acquires(lock); -static void unlock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) - __releases(lock); - - - -/* - * Global Data - */ - -static char wanrouter_fullname[] = "Sangoma WANPIPE Router"; -static char wanrouter_copyright[] = "(c) 1995-2000 Sangoma Technologies Inc."; -static char wanrouter_modname[] = ROUTER_NAME; /* short module name */ -struct wan_device* wanrouter_router_devlist; /* list of registered devices */ - -/* - * Organize Unique Identifiers for encapsulation/decapsulation - */ - -#if 0 -static unsigned char wanrouter_oui_ether[] = { 0x00, 0x00, 0x00 }; -static unsigned char wanrouter_oui_802_2[] = { 0x00, 0x80, 0xC2 }; -#endif - -static int __init wanrouter_init(void) -{ - int err; - - printk(KERN_INFO "%s v%u.%u %s\n", - wanrouter_fullname, ROUTER_VERSION, ROUTER_RELEASE, - wanrouter_copyright); - - err = wanrouter_proc_init(); - if (err) - printk(KERN_INFO "%s: can't create entry in proc filesystem!\n", - wanrouter_modname); - - return err; -} - -static void __exit wanrouter_cleanup (void) -{ - wanrouter_proc_cleanup(); -} - -/* - * This is just plain dumb. We should move the bugger to drivers/net/wan, - * slap it first in directory and make it module_init(). The only reason - * for subsys_initcall() here is that net goes after drivers (why, BTW?) - */ -subsys_initcall(wanrouter_init); -module_exit(wanrouter_cleanup); - -/* - * Kernel APIs - */ - -/* - * Register WAN device. - * o verify device credentials - * o create an entry for the device in the /proc/net/router directory - * o initialize internally maintained fields of the wan_device structure - * o link device data space to a singly-linked list - * o if it's the first device, then start kernel 'thread' - * o increment module use count - * - * Return: - * 0 Ok - * < 0 error. - * - * Context: process - */ - - -int register_wan_device(struct wan_device *wandev) -{ - int err, namelen; - - if ((wandev == NULL) || (wandev->magic != ROUTER_MAGIC) || - (wandev->name == NULL)) - return -EINVAL; - - namelen = strlen(wandev->name); - if (!namelen || (namelen > WAN_DRVNAME_SZ)) - return -EINVAL; - - if (wanrouter_find_device(wandev->name)) - return -EEXIST; - -#ifdef WANDEBUG - printk(KERN_INFO "%s: registering WAN device %s\n", - wanrouter_modname, wandev->name); -#endif - - /* - * Register /proc directory entry - */ - err = wanrouter_proc_add(wandev); - if (err) { - printk(KERN_INFO - "%s: can't create /proc/net/router/%s entry!\n", - wanrouter_modname, wandev->name); - return err; - } - - /* - * Initialize fields of the wan_device structure maintained by the - * router and update local data. - */ - - wandev->ndev = 0; - wandev->dev = NULL; - wandev->next = wanrouter_router_devlist; - wanrouter_router_devlist = wandev; - return 0; -} - -/* - * Unregister WAN device. - * o shut down device - * o unlink device data space from the linked list - * o delete device entry in the /proc/net/router directory - * o decrement module use count - * - * Return: 0 Ok - * <0 error. - * Context: process - */ - - -int unregister_wan_device(char *name) -{ - struct wan_device *wandev, *prev; - - if (name == NULL) - return -EINVAL; - - for (wandev = wanrouter_router_devlist, prev = NULL; - wandev && strcmp(wandev->name, name); - prev = wandev, wandev = wandev->next) - ; - if (wandev == NULL) - return -ENODEV; - -#ifdef WANDEBUG - printk(KERN_INFO "%s: unregistering WAN device %s\n", - wanrouter_modname, name); -#endif - - if (wandev->state != WAN_UNCONFIGURED) - wanrouter_device_shutdown(wandev); - - if (prev) - prev->next = wandev->next; - else - wanrouter_router_devlist = wandev->next; - - wanrouter_proc_delete(wandev); - return 0; -} - -#if 0 - -/* - * Encapsulate packet. - * - * Return: encapsulation header size - * < 0 - unsupported Ethertype - * - * Notes: - * 1. This function may be called on interrupt context. - */ - - -int wanrouter_encapsulate(struct sk_buff *skb, struct net_device *dev, - unsigned short type) -{ - int hdr_len = 0; - - switch (type) { - case ETH_P_IP: /* IP datagram encapsulation */ - hdr_len += 1; - skb_push(skb, 1); - skb->data[0] = NLPID_IP; - break; - - case ETH_P_IPX: /* SNAP encapsulation */ - case ETH_P_ARP: - hdr_len += 7; - skb_push(skb, 7); - skb->data[0] = 0; - skb->data[1] = NLPID_SNAP; - skb_copy_to_linear_data_offset(skb, 2, wanrouter_oui_ether, - sizeof(wanrouter_oui_ether)); - *((unsigned short*)&skb->data[5]) = htons(type); - break; - - default: /* Unknown packet type */ - printk(KERN_INFO - "%s: unsupported Ethertype 0x%04X on interface %s!\n", - wanrouter_modname, type, dev->name); - hdr_len = -EINVAL; - } - return hdr_len; -} - - -/* - * Decapsulate packet. - * - * Return: Ethertype (in network order) - * 0 unknown encapsulation - * - * Notes: - * 1. This function may be called on interrupt context. - */ - - -__be16 wanrouter_type_trans(struct sk_buff *skb, struct net_device *dev) -{ - int cnt = skb->data[0] ? 0 : 1; /* there may be a pad present */ - __be16 ethertype; - - switch (skb->data[cnt]) { - case NLPID_IP: /* IP datagramm */ - ethertype = htons(ETH_P_IP); - cnt += 1; - break; - - case NLPID_SNAP: /* SNAP encapsulation */ - if (memcmp(&skb->data[cnt + 1], wanrouter_oui_ether, - sizeof(wanrouter_oui_ether))){ - printk(KERN_INFO - "%s: unsupported SNAP OUI %02X-%02X-%02X " - "on interface %s!\n", wanrouter_modname, - skb->data[cnt+1], skb->data[cnt+2], - skb->data[cnt+3], dev->name); - return 0; - } - ethertype = *((__be16*)&skb->data[cnt+4]); - cnt += 6; - break; - - /* add other protocols, e.g. CLNP, ESIS, ISIS, if needed */ - - default: - printk(KERN_INFO - "%s: unsupported NLPID 0x%02X on interface %s!\n", - wanrouter_modname, skb->data[cnt], dev->name); - return 0; - } - skb->protocol = ethertype; - skb->pkt_type = PACKET_HOST; /* Physically point to point */ - skb_pull(skb, cnt); - skb_reset_mac_header(skb); - return ethertype; -} - -#endif /* 0 */ - -/* - * WAN device IOCTL. - * o find WAN device associated with this node - * o execute requested action or pass command to the device driver - */ - -long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - struct inode *inode = file->f_path.dentry->d_inode; - int err = 0; - struct proc_dir_entry *dent; - struct wan_device *wandev; - void __user *data = (void __user *)arg; - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - - if ((cmd >> 8) != ROUTER_IOCTL) - return -EINVAL; - - dent = PDE(inode); - if ((dent == NULL) || (dent->data == NULL)) - return -EINVAL; - - wandev = dent->data; - if (wandev->magic != ROUTER_MAGIC) - return -EINVAL; - - mutex_lock(&wanrouter_mutex); - switch (cmd) { - case ROUTER_SETUP: - err = wanrouter_device_setup(wandev, data); - break; - - case ROUTER_DOWN: - err = wanrouter_device_shutdown(wandev); - break; - - case ROUTER_STAT: - err = wanrouter_device_stat(wandev, data); - break; - - case ROUTER_IFNEW: - err = wanrouter_device_new_if(wandev, data); - break; - - case ROUTER_IFDEL: - err = wanrouter_device_del_if(wandev, data); - break; - - case ROUTER_IFSTAT: - break; - - default: - if ((cmd >= ROUTER_USER) && - (cmd <= ROUTER_USER_MAX) && - wandev->ioctl) - err = wandev->ioctl(wandev, cmd, arg); - else err = -EINVAL; - } - mutex_unlock(&wanrouter_mutex); - return err; -} - -/* - * WAN Driver IOCTL Handlers - */ - -/* - * Setup WAN link device. - * o verify user address space - * o allocate kernel memory and copy configuration data to kernel space - * o if configuration data includes extension, copy it to kernel space too - * o call driver's setup() entry point - */ - -static int wanrouter_device_setup(struct wan_device *wandev, - wandev_conf_t __user *u_conf) -{ - void *data = NULL; - wandev_conf_t *conf; - int err = -EINVAL; - - if (wandev->setup == NULL) { /* Nothing to do ? */ - printk(KERN_INFO "%s: ERROR, No setup script: wandev->setup()\n", - wandev->name); - return 0; - } - - conf = kmalloc(sizeof(wandev_conf_t), GFP_KERNEL); - if (conf == NULL){ - printk(KERN_INFO "%s: ERROR, Failed to allocate kernel memory !\n", - wandev->name); - return -ENOBUFS; - } - - if (copy_from_user(conf, u_conf, sizeof(wandev_conf_t))) { - printk(KERN_INFO "%s: Failed to copy user config data to kernel space!\n", - wandev->name); - kfree(conf); - return -EFAULT; - } - - if (conf->magic != ROUTER_MAGIC) { - kfree(conf); - printk(KERN_INFO "%s: ERROR, Invalid MAGIC Number\n", - wandev->name); - return -EINVAL; - } - - if (conf->data_size && conf->data) { - if (conf->data_size > 128000) { - printk(KERN_INFO - "%s: ERROR, Invalid firmware data size %i !\n", - wandev->name, conf->data_size); - kfree(conf); - return -EINVAL; - } - - data = vmalloc(conf->data_size); - if (!data) { - printk(KERN_INFO - "%s: ERROR, Failed allocate kernel memory !\n", - wandev->name); - kfree(conf); - return -ENOBUFS; - } - if (!copy_from_user(data, conf->data, conf->data_size)) { - conf->data = data; - err = wandev->setup(wandev, conf); - } else { - printk(KERN_INFO - "%s: ERROR, Failed to copy from user data !\n", - wandev->name); - err = -EFAULT; - } - vfree(data); - } else { - printk(KERN_INFO - "%s: ERROR, No firmware found ! Firmware size = %i !\n", - wandev->name, conf->data_size); - } - - kfree(conf); - return err; -} - -/* - * Shutdown WAN device. - * o delete all not opened logical channels for this device - * o call driver's shutdown() entry point - */ - -static int wanrouter_device_shutdown(struct wan_device *wandev) -{ - struct net_device *dev; - int err=0; - - if (wandev->state == WAN_UNCONFIGURED) - return 0; - - printk(KERN_INFO "\n%s: Shutting Down!\n",wandev->name); - - for (dev = wandev->dev; dev;) { - err = wanrouter_delete_interface(wandev, dev->name); - if (err) - return err; - /* The above function deallocates the current dev - * structure. Therefore, we cannot use netdev_priv(dev) - * as the next element: wandev->dev points to the - * next element */ - dev = wandev->dev; - } - - if (wandev->ndev) - return -EBUSY; /* there are opened interfaces */ - - if (wandev->shutdown) - err=wandev->shutdown(wandev); - - return err; -} - -/* - * Get WAN device status & statistics. - */ - -static int wanrouter_device_stat(struct wan_device *wandev, - wandev_stat_t __user *u_stat) -{ - wandev_stat_t stat; - - memset(&stat, 0, sizeof(stat)); - - /* Ask device driver to update device statistics */ - if ((wandev->state != WAN_UNCONFIGURED) && wandev->update) - wandev->update(wandev); - - /* Fill out structure */ - stat.ndev = wandev->ndev; - stat.state = wandev->state; - - if (copy_to_user(u_stat, &stat, sizeof(stat))) - return -EFAULT; - - return 0; -} - -/* - * Create new WAN interface. - * o verify user address space - * o copy configuration data to kernel address space - * o allocate network interface data space - * o call driver's new_if() entry point - * o make sure there is no interface name conflict - * o register network interface - */ - -static int wanrouter_device_new_if(struct wan_device *wandev, - wanif_conf_t __user *u_conf) -{ - wanif_conf_t *cnf; - struct net_device *dev = NULL; - int err; - - if ((wandev->state == WAN_UNCONFIGURED) || (wandev->new_if == NULL)) - return -ENODEV; - - cnf = kmalloc(sizeof(wanif_conf_t), GFP_KERNEL); - if (!cnf) - return -ENOBUFS; - - err = -EFAULT; - if (copy_from_user(cnf, u_conf, sizeof(wanif_conf_t))) - goto out; - - err = -EINVAL; - if (cnf->magic != ROUTER_MAGIC) - goto out; - - if (cnf->config_id == WANCONFIG_MPPP) { - printk(KERN_INFO "%s: Wanpipe Mulit-Port PPP support has not been compiled in!\n", - wandev->name); - err = -EPROTONOSUPPORT; - goto out; - } else { - err = wandev->new_if(wandev, dev, cnf); - } - - if (!err) { - /* Register network interface. This will invoke init() - * function supplied by the driver. If device registered - * successfully, add it to the interface list. - */ - -#ifdef WANDEBUG - printk(KERN_INFO "%s: registering interface %s...\n", - wanrouter_modname, dev->name); -#endif - - err = register_netdev(dev); - if (!err) { - struct net_device *slave = NULL; - unsigned long smp_flags=0; - - lock_adapter_irq(&wandev->lock, &smp_flags); - - if (wandev->dev == NULL) { - wandev->dev = dev; - } else { - for (slave=wandev->dev; - DEV_TO_SLAVE(slave); - slave = DEV_TO_SLAVE(slave)) - DEV_TO_SLAVE(slave) = dev; - } - ++wandev->ndev; - - unlock_adapter_irq(&wandev->lock, &smp_flags); - err = 0; /* done !!! */ - goto out; - } - if (wandev->del_if) - wandev->del_if(wandev, dev); - free_netdev(dev); - } - -out: - kfree(cnf); - return err; -} - - -/* - * Delete WAN logical channel. - * o verify user address space - * o copy configuration data to kernel address space - */ - -static int wanrouter_device_del_if(struct wan_device *wandev, char __user *u_name) -{ - char name[WAN_IFNAME_SZ + 1]; - int err = 0; - - if (wandev->state == WAN_UNCONFIGURED) - return -ENODEV; - - memset(name, 0, sizeof(name)); - - if (copy_from_user(name, u_name, WAN_IFNAME_SZ)) - return -EFAULT; - - err = wanrouter_delete_interface(wandev, name); - if (err) - return err; - - /* If last interface being deleted, shutdown card - * This helps with administration at leaf nodes - * (You can tell if the person at the other end of the phone - * has an interface configured) and avoids DoS vulnerabilities - * in binary driver files - this fixes a problem with the current - * Sangoma driver going into strange states when all the network - * interfaces are deleted and the link irrecoverably disconnected. - */ - - if (!wandev->ndev && wandev->shutdown) - err = wandev->shutdown(wandev); - - return err; -} - -/* - * Miscellaneous Functions - */ - -/* - * Find WAN device by name. - * Return pointer to the WAN device data space or NULL if device not found. - */ - -static struct wan_device *wanrouter_find_device(char *name) -{ - struct wan_device *wandev; - - for (wandev = wanrouter_router_devlist; - wandev && strcmp(wandev->name, name); - wandev = wandev->next); - return wandev; -} - -/* - * Delete WAN logical channel identified by its name. - * o find logical channel by its name - * o call driver's del_if() entry point - * o unregister network interface - * o unlink channel data space from linked list of channels - * o release channel data space - * - * Return: 0 success - * -ENODEV channel not found. - * -EBUSY interface is open - * - * Note: If (force != 0), then device will be destroyed even if interface - * associated with it is open. It's caller's responsibility to make - * sure that opened interfaces are not removed! - */ - -static int wanrouter_delete_interface(struct wan_device *wandev, char *name) -{ - struct net_device *dev = NULL, *prev = NULL; - unsigned long smp_flags=0; - - lock_adapter_irq(&wandev->lock, &smp_flags); - dev = wandev->dev; - prev = NULL; - while (dev && strcmp(name, dev->name)) { - struct net_device **slave = netdev_priv(dev); - prev = dev; - dev = *slave; - } - unlock_adapter_irq(&wandev->lock, &smp_flags); - - if (dev == NULL) - return -ENODEV; /* interface not found */ - - if (netif_running(dev)) - return -EBUSY; /* interface in use */ - - if (wandev->del_if) - wandev->del_if(wandev, dev); - - lock_adapter_irq(&wandev->lock, &smp_flags); - if (prev) { - struct net_device **prev_slave = netdev_priv(prev); - struct net_device **slave = netdev_priv(dev); - - *prev_slave = *slave; - } else { - struct net_device **slave = netdev_priv(dev); - wandev->dev = *slave; - } - --wandev->ndev; - unlock_adapter_irq(&wandev->lock, &smp_flags); - - printk(KERN_INFO "%s: unregistering '%s'\n", wandev->name, dev->name); - - unregister_netdev(dev); - - free_netdev(dev); - - return 0; -} - -static void lock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) - __acquires(lock) -{ - spin_lock_irqsave(lock, *smp_flags); -} - - -static void unlock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) - __releases(lock) -{ - spin_unlock_irqrestore(lock, *smp_flags); -} - -EXPORT_SYMBOL(register_wan_device); -EXPORT_SYMBOL(unregister_wan_device); - -MODULE_LICENSE("GPL"); - -/* - * End - */ diff --git a/net/wanrouter/wanproc.c b/net/wanrouter/wanproc.c deleted file mode 100644 index c43612ee96bb..000000000000 --- a/net/wanrouter/wanproc.c +++ /dev/null @@ -1,380 +0,0 @@ -/***************************************************************************** -* wanproc.c WAN Router Module. /proc filesystem interface. -* -* This module is completely hardware-independent and provides -* access to the router using Linux /proc filesystem. -* -* Author: Gideon Hack -* -* Copyright: (c) 1995-1999 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Jun 02, 1999 Gideon Hack Updates for Linux 2.2.X kernels. -* Jun 29, 1997 Alan Cox Merged with 1.0.3 vendor code -* Jan 29, 1997 Gene Kozin v1.0.1. Implemented /proc read routines -* Jan 30, 1997 Alan Cox Hacked around for 2.1 -* Dec 13, 1996 Gene Kozin Initial version (based on Sangoma's WANPIPE) -*****************************************************************************/ - -#include <linux/init.h> /* __initfunc et al. */ -#include <linux/stddef.h> /* offsetof(), etc. */ -#include <linux/errno.h> /* return codes */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/wanrouter.h> /* WAN router API definitions */ -#include <linux/seq_file.h> -#include <linux/mutex.h> - -#include <net/net_namespace.h> -#include <asm/io.h> - -#define PROC_STATS_FORMAT "%30s: %12lu\n" - -/****** Defines and Macros **************************************************/ - -#define PROT_DECODE(prot) ((prot == WANCONFIG_FR) ? " FR" :\ - (prot == WANCONFIG_X25) ? " X25" : \ - (prot == WANCONFIG_PPP) ? " PPP" : \ - (prot == WANCONFIG_CHDLC) ? " CHDLC": \ - (prot == WANCONFIG_MPPP) ? " MPPP" : \ - " Unknown" ) - -/****** Function Prototypes *************************************************/ - -#ifdef CONFIG_PROC_FS - -/* Miscellaneous */ - -/* - * Structures for interfacing with the /proc filesystem. - * Router creates its own directory /proc/net/router with the following - * entries: - * config device configuration - * status global device statistics - * <device> entry for each WAN device - */ - -/* - * Generic /proc/net/router/<file> file and inode operations - */ - -/* - * /proc/net/router - */ - -static DEFINE_MUTEX(config_mutex); -static struct proc_dir_entry *proc_router; - -/* Strings */ - -/* - * Interface functions - */ - -/****** Proc filesystem entry points ****************************************/ - -/* - * Iterator - */ -static void *r_start(struct seq_file *m, loff_t *pos) -{ - struct wan_device *wandev; - loff_t l = *pos; - - mutex_lock(&config_mutex); - if (!l--) - return SEQ_START_TOKEN; - for (wandev = wanrouter_router_devlist; l-- && wandev; - wandev = wandev->next) - ; - return wandev; -} - -static void *r_next(struct seq_file *m, void *v, loff_t *pos) -{ - struct wan_device *wandev = v; - (*pos)++; - return (v == SEQ_START_TOKEN) ? wanrouter_router_devlist : wandev->next; -} - -static void r_stop(struct seq_file *m, void *v) -{ - mutex_unlock(&config_mutex); -} - -static int config_show(struct seq_file *m, void *v) -{ - struct wan_device *p = v; - if (v == SEQ_START_TOKEN) { - seq_puts(m, "Device name | port |IRQ|DMA| mem.addr |" - "mem.size|option1|option2|option3|option4\n"); - return 0; - } - if (!p->state) - return 0; - seq_printf(m, "%-15s|0x%-4X|%3u|%3u| 0x%-8lX |0x%-6X|%7u|%7u|%7u|%7u\n", - p->name, p->ioport, p->irq, p->dma, p->maddr, p->msize, - p->hw_opt[0], p->hw_opt[1], p->hw_opt[2], p->hw_opt[3]); - return 0; -} - -static int status_show(struct seq_file *m, void *v) -{ - struct wan_device *p = v; - if (v == SEQ_START_TOKEN) { - seq_puts(m, "Device name |protocol|station|interface|" - "clocking|baud rate| MTU |ndev|link state\n"); - return 0; - } - if (!p->state) - return 0; - seq_printf(m, "%-15s|%-8s| %-7s| %-9s|%-8s|%9u|%5u|%3u |", - p->name, - PROT_DECODE(p->config_id), - p->config_id == WANCONFIG_FR ? - (p->station ? "Node" : "CPE") : - (p->config_id == WANCONFIG_X25 ? - (p->station ? "DCE" : "DTE") : - ("N/A")), - p->interface ? "V.35" : "RS-232", - p->clocking ? "internal" : "external", - p->bps, - p->mtu, - p->ndev); - - switch (p->state) { - case WAN_UNCONFIGURED: - seq_printf(m, "%-12s\n", "unconfigured"); - break; - case WAN_DISCONNECTED: - seq_printf(m, "%-12s\n", "disconnected"); - break; - case WAN_CONNECTING: - seq_printf(m, "%-12s\n", "connecting"); - break; - case WAN_CONNECTED: - seq_printf(m, "%-12s\n", "connected"); - break; - default: - seq_printf(m, "%-12s\n", "invalid"); - break; - } - return 0; -} - -static const struct seq_operations config_op = { - .start = r_start, - .next = r_next, - .stop = r_stop, - .show = config_show, -}; - -static const struct seq_operations status_op = { - .start = r_start, - .next = r_next, - .stop = r_stop, - .show = status_show, -}; - -static int config_open(struct inode *inode, struct file *file) -{ - return seq_open(file, &config_op); -} - -static int status_open(struct inode *inode, struct file *file) -{ - return seq_open(file, &status_op); -} - -static const struct file_operations config_fops = { - .owner = THIS_MODULE, - .open = config_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; - -static const struct file_operations status_fops = { - .owner = THIS_MODULE, - .open = status_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; - -static int wandev_show(struct seq_file *m, void *v) -{ - struct wan_device *wandev = m->private; - - if (wandev->magic != ROUTER_MAGIC) - return 0; - - if (!wandev->state) { - seq_puts(m, "device is not configured!\n"); - return 0; - } - - /* Update device statistics */ - if (wandev->update) { - int err = wandev->update(wandev); - if (err == -EAGAIN) { - seq_puts(m, "Device is busy!\n"); - return 0; - } - if (err) { - seq_puts(m, "Device is not configured!\n"); - return 0; - } - } - - seq_printf(m, PROC_STATS_FORMAT, - "total packets received", wandev->stats.rx_packets); - seq_printf(m, PROC_STATS_FORMAT, - "total packets transmitted", wandev->stats.tx_packets); - seq_printf(m, PROC_STATS_FORMAT, - "total bytes received", wandev->stats.rx_bytes); - seq_printf(m, PROC_STATS_FORMAT, - "total bytes transmitted", wandev->stats.tx_bytes); - seq_printf(m, PROC_STATS_FORMAT, - "bad packets received", wandev->stats.rx_errors); - seq_printf(m, PROC_STATS_FORMAT, - "packet transmit problems", wandev->stats.tx_errors); - seq_printf(m, PROC_STATS_FORMAT, - "received frames dropped", wandev->stats.rx_dropped); - seq_printf(m, PROC_STATS_FORMAT, - "transmit frames dropped", wandev->stats.tx_dropped); - seq_printf(m, PROC_STATS_FORMAT, - "multicast packets received", wandev->stats.multicast); - seq_printf(m, PROC_STATS_FORMAT, - "transmit collisions", wandev->stats.collisions); - seq_printf(m, PROC_STATS_FORMAT, - "receive length errors", wandev->stats.rx_length_errors); - seq_printf(m, PROC_STATS_FORMAT, - "receiver overrun errors", wandev->stats.rx_over_errors); - seq_printf(m, PROC_STATS_FORMAT, - "CRC errors", wandev->stats.rx_crc_errors); - seq_printf(m, PROC_STATS_FORMAT, - "frame format errors (aborts)", wandev->stats.rx_frame_errors); - seq_printf(m, PROC_STATS_FORMAT, - "receiver fifo overrun", wandev->stats.rx_fifo_errors); - seq_printf(m, PROC_STATS_FORMAT, - "receiver missed packet", wandev->stats.rx_missed_errors); - seq_printf(m, PROC_STATS_FORMAT, - "aborted frames transmitted", wandev->stats.tx_aborted_errors); - return 0; -} - -static int wandev_open(struct inode *inode, struct file *file) -{ - return single_open(file, wandev_show, PDE(inode)->data); -} - -static const struct file_operations wandev_fops = { - .owner = THIS_MODULE, - .open = wandev_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .unlocked_ioctl = wanrouter_ioctl, -}; - -/* - * Initialize router proc interface. - */ - -int __init wanrouter_proc_init(void) -{ - struct proc_dir_entry *p; - proc_router = proc_mkdir(ROUTER_NAME, init_net.proc_net); - if (!proc_router) - goto fail; - - p = proc_create("config", S_IRUGO, proc_router, &config_fops); - if (!p) - goto fail_config; - p = proc_create("status", S_IRUGO, proc_router, &status_fops); - if (!p) - goto fail_stat; - return 0; -fail_stat: - remove_proc_entry("config", proc_router); -fail_config: - remove_proc_entry(ROUTER_NAME, init_net.proc_net); -fail: - return -ENOMEM; -} - -/* - * Clean up router proc interface. - */ - -void wanrouter_proc_cleanup(void) -{ - remove_proc_entry("config", proc_router); - remove_proc_entry("status", proc_router); - remove_proc_entry(ROUTER_NAME, init_net.proc_net); -} - -/* - * Add directory entry for WAN device. - */ - -int wanrouter_proc_add(struct wan_device* wandev) -{ - if (wandev->magic != ROUTER_MAGIC) - return -EINVAL; - - wandev->dent = proc_create(wandev->name, S_IRUGO, - proc_router, &wandev_fops); - if (!wandev->dent) - return -ENOMEM; - wandev->dent->data = wandev; - return 0; -} - -/* - * Delete directory entry for WAN device. - */ -int wanrouter_proc_delete(struct wan_device* wandev) -{ - if (wandev->magic != ROUTER_MAGIC) - return -EINVAL; - remove_proc_entry(wandev->name, proc_router); - return 0; -} - -#else - -/* - * No /proc - output stubs - */ - -int __init wanrouter_proc_init(void) -{ - return 0; -} - -void wanrouter_proc_cleanup(void) -{ -} - -int wanrouter_proc_add(struct wan_device *wandev) -{ - return 0; -} - -int wanrouter_proc_delete(struct wan_device *wandev) -{ - return 0; -} - -#endif - -/* - * End - */ - |