diff options
| author | Hakan Jansson <hakan.jansson@infineon.com> | 2022-05-30 17:02:18 +0200 |
|---|---|---|
| committer | Luiz Augusto von Dentz <luiz.von.dentz@intel.com> | 2022-07-22 02:04:38 +0200 |
| commit | af35e28f0fea877832fa27802bc862b2a912f32a (patch) | |
| tree | ad726766d10991dcb4a10157f421cdda59c10d0f /net | |
| parent | dt-bindings: net: broadcom-bluetooth: Add property for autobaud mode (diff) | |
| download | linux-af35e28f0fea877832fa27802bc862b2a912f32a.tar.xz linux-af35e28f0fea877832fa27802bc862b2a912f32a.zip | |
Bluetooth: hci_bcm: Add support for FW loading in autobaud mode
Use the presence of a DT property, "brcm,requires-autobaud-mode", to enable
startup in autobaud mode. If the property is present, the device is started
in autobaud mode by asserting RTS (BT_UART_CTS_N) prior to powering on the
device.
Also prevent the use of unsupported commands for devices started in
autobaud mode. Only a limited subset of HCI commands are supported in
autobaud mode.
Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading.
Autobaud mode can also be required on some boards where the controller
device is using a non-standard baud rate in normal mode when first powered
on.
Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Diffstat (limited to 'net')
0 files changed, 0 insertions, 0 deletions