Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

26 files changed, 479 insertions, 222 deletions

diff --git a/samples/bpf/.gitignore b/samples/bpf/.gitignore
index 23837f2ed458..034800c4d1e6 100644
--- a/samples/bpf/.gitignore
+++ b/samples/bpf/.gitignore
@@ -50,3 +50,4 @@ xdp_rxq_info
 xdp_sample_pkts
 xdp_tx_iptunnel
 xdpsock
+testfile.img
diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index 424f6fe7ce38..8403e4762306 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -63,14 +63,14 @@ TRACE_HELPERS := ../../tools/testing/selftests/bpf/trace_helpers.o
 fds_example-objs := fds_example.o
 sockex1-objs := sockex1_user.o
 sockex2-objs := sockex2_user.o
-sockex3-objs := bpf_load.o sockex3_user.o
-tracex1-objs := bpf_load.o tracex1_user.o $(TRACE_HELPERS)
-tracex2-objs := bpf_load.o tracex2_user.o
-tracex3-objs := bpf_load.o tracex3_user.o
-tracex4-objs := bpf_load.o tracex4_user.o
-tracex5-objs := bpf_load.o tracex5_user.o $(TRACE_HELPERS)
-tracex6-objs := bpf_load.o tracex6_user.o
-tracex7-objs := bpf_load.o tracex7_user.o
+sockex3-objs := sockex3_user.o
+tracex1-objs := tracex1_user.o $(TRACE_HELPERS)
+tracex2-objs := tracex2_user.o
+tracex3-objs := tracex3_user.o
+tracex4-objs := tracex4_user.o
+tracex5-objs := tracex5_user.o $(TRACE_HELPERS)
+tracex6-objs := tracex6_user.o
+tracex7-objs := tracex7_user.o
 test_probe_write_user-objs := bpf_load.o test_probe_write_user_user.o
 trace_output-objs := bpf_load.o trace_output_user.o $(TRACE_HELPERS)
 lathist-objs := bpf_load.o lathist_user.o
diff --git a/samples/bpf/offwaketime_kern.c b/samples/bpf/offwaketime_kern.c
index c4ec10dbfc3b..d459f73412a4 100644
--- a/samples/bpf/offwaketime_kern.c
+++ b/samples/bpf/offwaketime_kern.c
@@ -5,12 +5,12 @@
  * License as published by the Free Software Foundation.
  */
 #include <uapi/linux/bpf.h>
-#include <bpf/bpf_helpers.h>
-#include <bpf/bpf_tracing.h>
 #include <uapi/linux/ptrace.h>
 #include <uapi/linux/perf_event.h>
 #include <linux/version.h>
 #include <linux/sched.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
 
 #define _(P) ({typeof(P) val; bpf_probe_read(&val, sizeof(val), &P); val;})
 
diff --git a/samples/bpf/sampleip_kern.c b/samples/bpf/sampleip_kern.c
index e504dc308371..f24806ac24e7 100644
--- a/samples/bpf/sampleip_kern.c
+++ b/samples/bpf/sampleip_kern.c
@@ -13,12 +13,12 @@
 
 #define MAX_IPS		8192
 
-struct bpf_map_def SEC("maps") ip_map = {
-	.type = BPF_MAP_TYPE_HASH,
-	.key_size = sizeof(u64),
-	.value_size = sizeof(u32),
-	.max_entries = MAX_IPS,
-};
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH);
+	__type(key, u64);
+	__type(value, u32);
+	__uint(max_entries, MAX_IPS);
+} ip_map SEC(".maps");
 
 SEC("perf_event")
 int do_sample(struct bpf_perf_event_data *ctx)
diff --git a/samples/bpf/sampleip_user.c b/samples/bpf/sampleip_user.c
index 4372d2da2f9e..921c505bb567 100644
--- a/samples/bpf/sampleip_user.c
+++ b/samples/bpf/sampleip_user.c
@@ -18,9 +18,6 @@
 #include "perf-sys.h"
 #include "trace_helpers.h"
 
-#define __must_check
-#include <linux/err.h>
-
 #define DEFAULT_FREQ	99
 #define DEFAULT_SECS	5
 #define MAX_IPS		8192
@@ -57,7 +54,7 @@ static int sampling_start(int freq, struct bpf_program *prog,
 			return 1;
 		}
 		links[i] = bpf_program__attach_perf_event(prog, pmu_fd);
-		if (IS_ERR(links[i])) {
+		if (libbpf_get_error(links[i])) {
 			fprintf(stderr, "ERROR: Attach perf event\n");
 			links[i] = NULL;
 			close(pmu_fd);
@@ -182,7 +179,7 @@ int main(int argc, char **argv)
 
 	snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
 	obj = bpf_object__open_file(filename, NULL);
-	if (IS_ERR(obj)) {
+	if (libbpf_get_error(obj)) {
 		fprintf(stderr, "ERROR: opening BPF object file failed\n");
 		obj = NULL;
 		goto cleanup;
diff --git a/samples/bpf/sockex2_kern.c b/samples/bpf/sockex2_kern.c
index a41dd520bc53..b7997541f7ee 100644
--- a/samples/bpf/sockex2_kern.c
+++ b/samples/bpf/sockex2_kern.c
@@ -1,12 +1,12 @@
 #include <uapi/linux/bpf.h>
-#include <bpf/bpf_helpers.h>
-#include "bpf_legacy.h"
 #include <uapi/linux/in.h>
 #include <uapi/linux/if.h>
 #include <uapi/linux/if_ether.h>
 #include <uapi/linux/ip.h>
 #include <uapi/linux/ipv6.h>
 #include <uapi/linux/if_tunnel.h>
+#include <bpf/bpf_helpers.h>
+#include "bpf_legacy.h"
 #define IP_MF		0x2000
 #define IP_OFFSET	0x1FFF
 
diff --git a/samples/bpf/sockex3_kern.c b/samples/bpf/sockex3_kern.c
index 36d4dac23549..cab9cca0b8eb 100644
--- a/samples/bpf/sockex3_kern.c
+++ b/samples/bpf/sockex3_kern.c
@@ -5,8 +5,6 @@
  * License as published by the Free Software Foundation.
  */
 #include <uapi/linux/bpf.h>
-#include <bpf/bpf_helpers.h>
-#include "bpf_legacy.h"
 #include <uapi/linux/in.h>
 #include <uapi/linux/if.h>
 #include <uapi/linux/if_ether.h>
@@ -14,17 +12,19 @@
 #include <uapi/linux/ipv6.h>
 #include <uapi/linux/if_tunnel.h>
 #include <uapi/linux/mpls.h>
+#include <bpf/bpf_helpers.h>
+#include "bpf_legacy.h"
 #define IP_MF		0x2000
 #define IP_OFFSET	0x1FFF
 
 #define PROG(F) SEC("socket/"__stringify(F)) int bpf_func_##F
 
-struct bpf_map_def SEC("maps") jmp_table = {
-	.type = BPF_MAP_TYPE_PROG_ARRAY,
-	.key_size = sizeof(u32),
-	.value_size = sizeof(u32),
-	.max_entries = 8,
-};
+struct {
+	__uint(type, BPF_MAP_TYPE_PROG_ARRAY);
+	__uint(key_size, sizeof(u32));
+	__uint(value_size, sizeof(u32));
+	__uint(max_entries, 8);
+} jmp_table SEC(".maps");
 
 #define PARSE_VLAN 1
 #define PARSE_MPLS 2
@@ -92,12 +92,12 @@ struct globals {
 	struct flow_key_record flow;
 };
 
-struct bpf_map_def SEC("maps") percpu_map = {
-	.type = BPF_MAP_TYPE_ARRAY,
-	.key_size = sizeof(__u32),
-	.value_size = sizeof(struct globals),
-	.max_entries = 32,
-};
+struct {
+	__uint(type, BPF_MAP_TYPE_ARRAY);
+	__type(key, __u32);
+	__type(value, struct globals);
+	__uint(max_entries, 32);
+} percpu_map SEC(".maps");
 
 /* user poor man's per_cpu until native support is ready */
 static struct globals *this_cpu_globals(void)
@@ -113,12 +113,12 @@ struct pair {
 	__u64 bytes;
 };
 
-struct bpf_map_def SEC("maps") hash_map = {
-	.type = BPF_MAP_TYPE_HASH,
-	.key_size = sizeof(struct flow_key_record),
-	.value_size = sizeof(struct pair),
-	.max_entries = 1024,
-};
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH);
+	__type(key, struct flow_key_record);
+	__type(value, struct pair);
+	__uint(max_entries, 1024);
+} hash_map SEC(".maps");
 
 static void update_stats(struct __sk_buff *skb, struct globals *g)
 {
diff --git a/samples/bpf/sockex3_user.c b/samples/bpf/sockex3_user.c
index bbb1cd0666a9..4dbee7427d47 100644
--- a/samples/bpf/sockex3_user.c
+++ b/samples/bpf/sockex3_user.c
@@ -1,18 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <stdio.h>
 #include <assert.h>
-#include <linux/bpf.h>
 #include <bpf/bpf.h>
-#include "bpf_load.h"
+#include <bpf/libbpf.h>
 #include "sock_example.h"
 #include <unistd.h>
 #include <arpa/inet.h>
 #include <sys/resource.h>
 
-#define PARSE_IP 3
-#define PARSE_IP_PROG_FD (prog_fd[0])
-#define PROG_ARRAY_FD (map_fd[0])
-
 struct flow_key_record {
 	__be32 src;
 	__be32 dst;
@@ -30,31 +25,55 @@ struct pair {
 
 int main(int argc, char **argv)
 {
+	int i, sock, key, fd, main_prog_fd, jmp_table_fd, hash_map_fd;
 	struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
+	struct bpf_program *prog;
+	struct bpf_object *obj;
 	char filename[256];
+	const char *title;
 	FILE *f;
-	int i, sock, err, id, key = PARSE_IP;
-	struct bpf_prog_info info = {};
-	uint32_t info_len = sizeof(info);
 
 	snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
 	setrlimit(RLIMIT_MEMLOCK, &r);
 
-	if (load_bpf_file(filename)) {
-		printf("%s", bpf_log_buf);
-		return 1;
+	obj = bpf_object__open_file(filename, NULL);
+	if (libbpf_get_error(obj)) {
+		fprintf(stderr, "ERROR: opening BPF object file failed\n");
+		return 0;
+	}
+
+	/* load BPF program */
+	if (bpf_object__load(obj)) {
+		fprintf(stderr, "ERROR: loading BPF object file failed\n");
+		goto cleanup;
+	}
+
+	jmp_table_fd = bpf_object__find_map_fd_by_name(obj, "jmp_table");
+	hash_map_fd = bpf_object__find_map_fd_by_name(obj, "hash_map");
+	if (jmp_table_fd < 0 || hash_map_fd < 0) {
+		fprintf(stderr, "ERROR: finding a map in obj file failed\n");
+		goto cleanup;
 	}
 
-	/* Test fd array lookup which returns the id of the bpf_prog */
-	err = bpf_obj_get_info_by_fd(PARSE_IP_PROG_FD, &info, &info_len);
-	assert(!err);
-	err = bpf_map_lookup_elem(PROG_ARRAY_FD, &key, &id);
-	assert(!err);
-	assert(id == info.id);
+	bpf_object__for_each_program(prog, obj) {
+		fd = bpf_program__fd(prog);
+
+		title = bpf_program__title(prog, false);
+		if (sscanf(title, "socket/%d", &key) != 1) {
+			fprintf(stderr, "ERROR: finding prog failed\n");
+			goto cleanup;
+		}
+
+		if (key == 0)
+			main_prog_fd = fd;
+		else
+			bpf_map_update_elem(jmp_table_fd, &key, &fd, BPF_ANY);
+	}
 
 	sock = open_raw_sock("lo");
 
-	assert(setsockopt(sock, SOL_SOCKET, SO_ATTACH_BPF, &prog_fd[4],
+	/* attach BPF program to socket */
+	assert(setsockopt(sock, SOL_SOCKET, SO_ATTACH_BPF, &main_prog_fd,
 			  sizeof(__u32)) == 0);
 
 	if (argc > 1)
@@ -69,8 +88,8 @@ int main(int argc, char **argv)
 
 		sleep(1);
 		printf("IP     src.port -> dst.port               bytes      packets\n");
-		while (bpf_map_get_next_key(map_fd[2], &key, &next_key) == 0) {
-			bpf_map_lookup_elem(map_fd[2], &next_key, &value);
+		while (bpf_map_get_next_key(hash_map_fd, &key, &next_key) == 0) {
+			bpf_map_lookup_elem(hash_map_fd, &next_key, &value);
 			printf("%s.%05d -> %s.%05d %12lld %12lld\n",
 			       inet_ntoa((struct in_addr){htonl(next_key.src)}),
 			       next_key.port16[0],
@@ -80,5 +99,8 @@ int main(int argc, char **argv)
 			key = next_key;
 		}
 	}
+
+cleanup:
+	bpf_object__close(obj);
 	return 0;
 }
diff --git a/samples/bpf/trace_common.h b/samples/bpf/trace_common.h
new file mode 100644
index 000000000000..8cb5400aed1f
--- /dev/null
+++ b/samples/bpf/trace_common.h
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+#ifndef __TRACE_COMMON_H
+#define __TRACE_COMMON_H
+
+#ifdef __x86_64__
+#define SYSCALL(SYS) "__x64_" __stringify(SYS)
+#elif defined(__s390x__)
+#define SYSCALL(SYS) "__s390x_" __stringify(SYS)
+#else
+#define SYSCALL(SYS)  __stringify(SYS)
+#endif
+
+#endif
diff --git a/samples/bpf/trace_event_kern.c b/samples/bpf/trace_event_kern.c
index da1d69e20645..7d3c66fb3f88 100644
--- a/samples/bpf/trace_event_kern.c
+++ b/samples/bpf/trace_event_kern.c
@@ -18,19 +18,19 @@ struct key_t {
 	u32 userstack;
 };
 
-struct bpf_map_def SEC("maps") counts = {
-	.type = BPF_MAP_TYPE_HASH,
-	.key_size = sizeof(struct key_t),
-	.value_size = sizeof(u64),
-	.max_entries = 10000,
-};
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH);
+	__type(key, struct key_t);
+	__type(value, u64);
+	__uint(max_entries, 10000);
+} counts SEC(".maps");
 
-struct bpf_map_def SEC("maps") stackmap = {
-	.type = BPF_MAP_TYPE_STACK_TRACE,
-	.key_size = sizeof(u32),
-	.value_size = PERF_MAX_STACK_DEPTH * sizeof(u64),
-	.max_entries = 10000,
-};
+struct {
+	__uint(type, BPF_MAP_TYPE_STACK_TRACE);
+	__uint(key_size, sizeof(u32));
+	__uint(value_size, PERF_MAX_STACK_DEPTH * sizeof(u64));
+	__uint(max_entries, 10000);
+} stackmap SEC(".maps");
 
 #define KERN_STACKID_FLAGS (0 | BPF_F_FAST_STACK_CMP)
 #define USER_STACKID_FLAGS (0 | BPF_F_FAST_STACK_CMP | BPF_F_USER_STACK)
diff --git a/samples/bpf/trace_event_user.c b/samples/bpf/trace_event_user.c
index b6cd358d0418..ac1ba368195c 100644
--- a/samples/bpf/trace_event_user.c
+++ b/samples/bpf/trace_event_user.c
@@ -16,9 +16,6 @@
 #include "perf-sys.h"
 #include "trace_helpers.h"
 
-#define __must_check
-#include <linux/err.h>
-
 #define SAMPLE_FREQ 50
 
 static int pid;
@@ -159,7 +156,7 @@ static void test_perf_event_all_cpu(struct perf_event_attr *attr)
 			goto all_cpu_err;
 		}
 		links[i] = bpf_program__attach_perf_event(prog, pmu_fd);
-		if (IS_ERR(links[i])) {
+		if (libbpf_get_error(links[i])) {
 			printf("bpf_program__attach_perf_event failed\n");
 			links[i] = NULL;
 			close(pmu_fd);
@@ -198,7 +195,7 @@ static void test_perf_event_task(struct perf_event_attr *attr)
 		goto err;
 	}
 	link = bpf_program__attach_perf_event(prog, pmu_fd);
-	if (IS_ERR(link)) {
+	if (libbpf_get_error(link)) {
 		printf("bpf_program__attach_perf_event failed\n");
 		link = NULL;
 		close(pmu_fd);
@@ -314,7 +311,7 @@ int main(int argc, char **argv)
 	}
 
 	obj = bpf_object__open_file(filename, NULL);
-	if (IS_ERR(obj)) {
+	if (libbpf_get_error(obj)) {
 		printf("opening BPF object file failed\n");
 		obj = NULL;
 		goto cleanup;
diff --git a/samples/bpf/tracex1_user.c b/samples/bpf/tracex1_user.c
index 55fddbd08702..9d4adb7fd834 100644
--- a/samples/bpf/tracex1_user.c
+++ b/samples/bpf/tracex1_user.c
@@ -1,21 +1,41 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <stdio.h>
-#include <linux/bpf.h>
 #include <unistd.h>
-#include <bpf/bpf.h>
-#include "bpf_load.h"
+#include <bpf/libbpf.h>
 #include "trace_helpers.h"
 
 int main(int ac, char **argv)
 {
-	FILE *f;
+	struct bpf_link *link = NULL;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
 	char filename[256];
+	FILE *f;
 
 	snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
+	obj = bpf_object__open_file(filename, NULL);
+	if (libbpf_get_error(obj)) {
+		fprintf(stderr, "ERROR: opening BPF object file failed\n");
+		return 0;
+	}
+
+	prog = bpf_object__find_program_by_name(obj, "bpf_prog1");
+	if (!prog) {
+		fprintf(stderr, "ERROR: finding a prog in obj file failed\n");
+		goto cleanup;
+	}
+
+	/* load BPF program */
+	if (bpf_object__load(obj)) {
+		fprintf(stderr, "ERROR: loading BPF object file failed\n");
+		goto cleanup;
+	}
 
-	if (load_bpf_file(filename)) {
-		printf("%s", bpf_log_buf);
-		return 1;
+	link = bpf_program__attach(prog);
+	if (libbpf_get_error(link)) {
+		fprintf(stderr, "ERROR: bpf_program__attach failed\n");
+		link = NULL;
+		goto cleanup;
 	}
 
 	f = popen("taskset 1 ping -c5 localhost", "r");
@@ -23,5 +43,8 @@ int main(int ac, char **argv)
 
 	read_trace_pipe();
 
+cleanup:
+	bpf_link__destroy(link);
+	bpf_object__close(obj);
 	return 0;
 }
diff --git a/samples/bpf/tracex2_kern.c b/samples/bpf/tracex2_kern.c
index d865bb309bcb..5bc696bac27d 100644
--- a/samples/bpf/tracex2_kern.c
+++ b/samples/bpf/tracex2_kern.c
@@ -10,13 +10,14 @@
 #include <uapi/linux/bpf.h>
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_tracing.h>
+#include "trace_common.h"
 
-struct bpf_map_def SEC("maps") my_map = {
-	.type = BPF_MAP_TYPE_HASH,
-	.key_size = sizeof(long),
-	.value_size = sizeof(long),
-	.max_entries = 1024,
-};
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH);
+	__type(key, long);
+	__type(value, long);
+	__uint(max_entries, 1024);
+} my_map SEC(".maps");
 
 /* kprobe is NOT a stable ABI. If kernel internals change this bpf+kprobe
  * example will no longer be meaningful
@@ -70,14 +71,14 @@ struct hist_key {
 	u64 index;
 };
 
-struct bpf_map_def SEC("maps") my_hist_map = {
-	.type = BPF_MAP_TYPE_PERCPU_HASH,
-	.key_size = sizeof(struct hist_key),
-	.value_size = sizeof(long),
-	.max_entries = 1024,
-};
+struct {
+	__uint(type, BPF_MAP_TYPE_PERCPU_HASH);
+	__uint(key_size, sizeof(struct hist_key));
+	__uint(value_size, sizeof(long));
+	__uint(max_entries, 1024);
+} my_hist_map SEC(".maps");
 
-SEC("kprobe/sys_write")
+SEC("kprobe/" SYSCALL(sys_write))
 int bpf_prog3(struct pt_regs *ctx)
 {
 	long write_size = PT_REGS_PARM3(ctx);
diff --git a/samples/bpf/tracex2_user.c b/samples/bpf/tracex2_user.c
index c9544a4ce61a..3e36b3e4e3ef 100644
--- a/samples/bpf/tracex2_user.c
+++ b/samples/bpf/tracex2_user.c
@@ -3,17 +3,19 @@
 #include <unistd.h>
 #include <stdlib.h>
 #include <signal.h>
-#include <linux/bpf.h>
 #include <string.h>
 #include <sys/resource.h>
 
 #include <bpf/bpf.h>
-#include "bpf_load.h"
+#include <bpf/libbpf.h>
 #include "bpf_util.h"
 
 #define MAX_INDEX	64
 #define MAX_STARS	38
 
+/* my_map, my_hist_map */
+static int map_fd[2];
+
 static void stars(char *str, long val, long max, int width)
 {
 	int i;
@@ -115,18 +117,39 @@ static void int_exit(int sig)
 int main(int ac, char **argv)
 {
 	struct rlimit r = {1024*1024, RLIM_INFINITY};
-	char filename[256];
 	long key, next_key, value;
+	struct bpf_link *links[2];
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	char filename[256];
+	int i, j = 0;
 	FILE *f;
-	int i;
-
-	snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
 
 	if (setrlimit(RLIMIT_MEMLOCK, &r)) {
 		perror("setrlimit(RLIMIT_MEMLOCK)");
 		return 1;
 	}
 
+	snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
+	obj = bpf_object__open_file(filename, NULL);
+	if (libbpf_get_error(obj)) {
+		fprintf(stderr, "ERROR: opening BPF object file failed\n");
+		return 0;
+	}
+
+	/* load BPF program */
+	if (bpf_object__load(obj)) {
+		fprintf(stderr, "ERROR: loading BPF object file failed\n");
+		goto cleanup;
+	}
+
+	map_fd[0] = bpf_object__find_map_fd_by_name(obj, "my_map");
+	map_fd[1] = bpf_object__find_map_fd_by_name(obj, "my_hist_map");
+	if (map_fd[0] < 0 || map_fd[1] < 0) {
+		fprintf(stderr, "ERROR: finding a map in obj file failed\n");
+		goto cleanup;
+	}
+
 	signal(SIGINT, int_exit);
 	signal(SIGTERM, int_exit);
 
@@ -138,9 +161,14 @@ int main(int ac, char **argv)
 	f = popen("dd if=/dev/zero of=/dev/null count=5000000", "r");
 	(void) f;
 
-	if (load_bpf_file(filename)) {
-		printf("%s", bpf_log_buf);
-		return 1;
+	bpf_object__for_each_program(prog, obj) {
+		links[j] = bpf_program__attach(prog);
+		if (libbpf_get_error(links[j])) {
+			fprintf(stderr, "ERROR: bpf_program__attach failed\n");
+			links[j] = NULL;
+			goto cleanup;
+		}
+		j++;
 	}
 
 	for (i = 0; i < 5; i++) {
@@ -156,5 +184,10 @@ int main(int ac, char **argv)
 	}
 	print_hist(map_fd[1]);
 
+cleanup:
+	for (j--; j >= 0; j--)
+		bpf_link__destroy(links[j]);
+
+	bpf_object__close(obj);
 	return 0;
 }
diff --git a/samples/bpf/tracex3_kern.c b/samples/bpf/tracex3_kern.c
index fe21c14feb8d..659613c19a82 100644
--- a/samples/bpf/tracex3_kern.c
+++ b/samples/bpf/tracex3_kern.c
@@ -11,12 +11,12 @@
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_tracing.h>
 
-struct bpf_map_def SEC("maps") my_map = {
-	.type = BPF_MAP_TYPE_HASH,
-	.key_size = sizeof(long),
-	.value_size = sizeof(u64),
-	.max_entries = 4096,
-};
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH);
+	__type(key, long);
+	__type(value, u64);
+	__uint(max_entries, 4096);
+} my_map SEC(".maps");
 
 /* kprobe is NOT a stable ABI. If kernel internals change this bpf+kprobe
  * example will no longer be meaningful
@@ -42,12 +42,12 @@ static unsigned int log2l(unsigned long long n)
 
 #define SLOTS 100
 
-struct bpf_map_def SEC("maps") lat_map = {
-	.type = BPF_MAP_TYPE_PERCPU_ARRAY,
-	.key_size = sizeof(u32),
-	.value_size = sizeof(u64),
-	.max_entries = SLOTS,
-};
+struct {
+	__uint(type, BPF_MAP_TYPE_PERCPU_ARRAY);
+	__uint(key_size, sizeof(u32));
+	__uint(value_size, sizeof(u64));
+	__uint(max_entries, SLOTS);
+} lat_map SEC(".maps");
 
 SEC("kprobe/blk_account_io_completion")
 int bpf_prog2(struct pt_regs *ctx)
diff --git a/samples/bpf/tracex3_user.c b/samples/bpf/tracex3_user.c
index cf8fedc773f2..70e987775c15 100644
--- a/samples/bpf/tracex3_user.c
+++ b/samples/bpf/tracex3_user.c
@@ -7,11 +7,10 @@
 #include <unistd.h>
 #include <stdbool.h>
 #include <string.h>
-#include <linux/bpf.h>
 #include <sys/resource.h>
 
 #include <bpf/bpf.h>
-#include "bpf_load.h"
+#include <bpf/libbpf.h>
 #include "bpf_util.h"
 
 #define SLOTS 100
@@ -109,20 +108,11 @@ static void print_hist(int fd)
 int main(int ac, char **argv)
 {
 	struct rlimit r = {1024*1024, RLIM_INFINITY};
+	struct bpf_link *links[2];
+	struct bpf_program *prog;
+	struct bpf_object *obj;
 	char filename[256];
-	int i;
-
-	snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
-
-	if (setrlimit(RLIMIT_MEMLOCK, &r)) {
-		perror("setrlimit(RLIMIT_MEMLOCK)");
-		return 1;
-	}
-
-	if (load_bpf_file(filename)) {
-		printf("%s", bpf_log_buf);
-		return 1;
-	}
+	int map_fd, i, j = 0;
 
 	for (i = 1; i < ac; i++) {
 		if (strcmp(argv[i], "-a") == 0) {
@@ -137,6 +127,40 @@ int main(int ac, char **argv)
 		}
 	}
 
+	if (setrlimit(RLIMIT_MEMLOCK, &r)) {
+		perror("setrlimit(RLIMIT_MEMLOCK)");
+		return 1;
+	}
+
+	snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
+	obj = bpf_object__open_file(filename, NULL);
+	if (libbpf_get_error(obj)) {
+		fprintf(stderr, "ERROR: opening BPF object file failed\n");
+		return 0;
+	}
+
+	/* load BPF program */
+	if (bpf_object__load(obj)) {
+		fprintf(stderr, "ERROR: loading BPF object file failed\n");
+		goto cleanup;
+	}
+
+	map_fd = bpf_object__find_map_fd_by_name(obj, "lat_map");
+	if (map_fd < 0) {
+		fprintf(stderr, "ERROR: finding a map in obj file failed\n");
+		goto cleanup;
+	}
+
+	bpf_object__for_each_program(prog, obj) {
+		links[j] = bpf_program__attach(prog);
+		if (libbpf_get_error(links[j])) {
+			fprintf(stderr, "ERROR: bpf_program__attach failed\n");
+			links[j] = NULL;
+			goto cleanup;
+		}
+		j++;
+	}
+
 	printf("  heatmap of IO latency\n");
 	if (text_only)
 		printf("  %s", sym[num_colors - 1]);
@@ -153,9 +177,14 @@ int main(int ac, char **argv)
 	for (i = 0; ; i++) {
 		if (i % 20 == 0)
 			print_banner();
-		print_hist(map_fd[1]);
+		print_hist(map_fd);
 		sleep(2);
 	}
 
+cleanup:
+	for (j--; j >= 0; j--)
+		bpf_link__destroy(links[j]);
+
+	bpf_object__close(obj);
 	return 0;
 }
diff --git a/samples/bpf/tracex4_kern.c b/samples/bpf/tracex4_kern.c
index b1bb9df88f8e..eb0f8fdd14bf 100644
--- a/samples/bpf/tracex4_kern.c
+++ b/samples/bpf/tracex4_kern.c
@@ -15,12 +15,12 @@ struct pair {
 	u64 ip;
 };
 
-struct bpf_map_def SEC("maps") my_map = {
-	.type = BPF_MAP_TYPE_HASH,
-	.key_size = sizeof(long),
-	.value_size = sizeof(struct pair),
-	.max_entries = 1000000,
-};
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH);
+	__type(key, long);
+	__type(value, struct pair);
+	__uint(max_entries, 1000000);
+} my_map SEC(".maps");
 
 /* kprobe is NOT a stable ABI. If kernel internals change this bpf+kprobe
  * example will no longer be meaningful
diff --git a/samples/bpf/tracex4_user.c b/samples/bpf/tracex4_user.c
index ec52203fce39..e8faf8f184ae 100644
--- a/samples/bpf/tracex4_user.c
+++ b/samples/bpf/tracex4_user.c
@@ -8,11 +8,10 @@
 #include <stdbool.h>
 #include <string.h>
 #include <time.h>
-#include <linux/bpf.h>
 #include <sys/resource.h>
 
 #include <bpf/bpf.h>
-#include "bpf_load.h"
+#include <bpf/libbpf.h>
 
 struct pair {
 	long long val;
@@ -36,8 +35,8 @@ static void print_old_objects(int fd)
 	key = write(1, "\e[1;1H\e[2J", 12); /* clear screen */
 
 	key = -1;
-	while (bpf_map_get_next_key(map_fd[0], &key, &next_key) == 0) {
-		bpf_map_lookup_elem(map_fd[0], &next_key, &v);
+	while (bpf_map_get_next_key(fd, &key, &next_key) == 0) {
+		bpf_map_lookup_elem(fd, &next_key, &v);
 		key = next_key;
 		if (val - v.val < 1000000000ll)
 			/* object was allocated more then 1 sec ago */
@@ -50,25 +49,55 @@ static void print_old_objects(int fd)
 int main(int ac, char **argv)
 {
 	struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
+	struct bpf_link *links[2];
+	struct bpf_program *prog;
+	struct bpf_object *obj;
 	char filename[256];
-	int i;
-
-	snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
+	int map_fd, i, j = 0;
 
 	if (setrlimit(RLIMIT_MEMLOCK, &r)) {
 		perror("setrlimit(RLIMIT_MEMLOCK, RLIM_INFINITY)");
 		return 1;
 	}
 
-	if (load_bpf_file(filename)) {
-		printf("%s", bpf_log_buf);
-		return 1;
+	snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
+	obj = bpf_object__open_file(filename, NULL);
+	if (libbpf_get_error(obj)) {
+		fprintf(stderr, "ERROR: opening BPF object file failed\n");
+		return 0;
+	}
+
+	/* load BPF program */
+	if (bpf_object__load(obj)) {
+		fprintf(stderr, "ERROR: loading BPF object file failed\n");
+		goto cleanup;
+	}
+
+	map_fd = bpf_object__find_map_fd_by_name(obj, "my_map");
+	if (map_fd < 0) {
+		fprintf(stderr, "ERROR: finding a map in obj file failed\n");
+		goto cleanup;
+	}
+
+	bpf_object__for_each_program(prog, obj) {
+		links[j] = bpf_program__attach(prog);
+		if (libbpf_get_error(links[j])) {
+			fprintf(stderr, "ERROR: bpf_program__attach failed\n");
+			links[j] = NULL;
+			goto cleanup;
+		}
+		j++;
 	}
 
 	for (i = 0; ; i++) {
-		print_old_objects(map_fd[1]);
+		print_old_objects(map_fd);
 		sleep(1);
 	}
 
+cleanup:
+	for (j--; j >= 0; j--)
+		bpf_link__destroy(links[j]);
+
+	bpf_object__close(obj);
 	return 0;
 }
diff --git a/samples/bpf/tracex5_kern.c b/samples/bpf/tracex5_kern.c
index 481790fde864..32b49e8ab6bd 100644
--- a/samples/bpf/tracex5_kern.c
+++ b/samples/bpf/tracex5_kern.c
@@ -15,16 +15,16 @@
 
 #define PROG(F) SEC("kprobe/"__stringify(F)) int bpf_func_##F
 
-struct bpf_map_def SEC("maps") progs = {
-	.type = BPF_MAP_TYPE_PROG_ARRAY,
-	.key_size = sizeof(u32),
-	.value_size = sizeof(u32),
+struct {
+	__uint(type, BPF_MAP_TYPE_PROG_ARRAY);
+	__uint(key_size, sizeof(u32));
+	__uint(value_size, sizeof(u32));
 #ifdef __mips__
-	.max_entries = 6000, /* MIPS n64 syscalls start at 5000 */
+	__uint(max_entries, 6000); /* MIPS n64 syscalls start at 5000 */
 #else
-	.max_entries = 1024,
+	__uint(max_entries, 1024);
 #endif
-};
+} progs SEC(".maps");
 
 SEC("kprobe/__seccomp_filter")
 int bpf_prog1(struct pt_regs *ctx)
diff --git a/samples/bpf/tracex5_user.c b/samples/bpf/tracex5_user.c
index c2317b39e0d2..98dad57a96c4 100644
--- a/samples/bpf/tracex5_user.c
+++ b/samples/bpf/tracex5_user.c
@@ -1,15 +1,21 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <stdio.h>
-#include <linux/bpf.h>
+#include <stdlib.h>
 #include <unistd.h>
 #include <linux/filter.h>
 #include <linux/seccomp.h>
 #include <sys/prctl.h>
 #include <bpf/bpf.h>
-#include "bpf_load.h"
+#include <bpf/libbpf.h>
 #include <sys/resource.h>
 #include "trace_helpers.h"
 
+#ifdef __mips__
+#define	MAX_ENTRIES  6000 /* MIPS n64 syscalls start at 5000 */
+#else
+#define	MAX_ENTRIES  1024
+#endif
+
 /* install fake seccomp program to enable seccomp code path inside the kernel,
  * so that our kprobe attached to seccomp_phase1() can be triggered
  */
@@ -28,16 +34,57 @@ static void install_accept_all_seccomp(void)
 
 int main(int ac, char **argv)
 {
-	FILE *f;
-	char filename[256];
 	struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
+	struct bpf_link *link = NULL;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
+	int key, fd, progs_fd;
+	char filename[256];
+	const char *title;
+	FILE *f;
 
-	snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
 	setrlimit(RLIMIT_MEMLOCK, &r);
 
-	if (load_bpf_file(filename)) {
-		printf("%s", bpf_log_buf);
-		return 1;
+	snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
+	obj = bpf_object__open_file(filename, NULL);
+	if (libbpf_get_error(obj)) {
+		fprintf(stderr, "ERROR: opening BPF object file failed\n");
+		return 0;
+	}
+
+	prog = bpf_object__find_program_by_name(obj, "bpf_prog1");
+	if (!prog) {
+		printf("finding a prog in obj file failed\n");
+		goto cleanup;
+	}
+
+	/* load BPF program */
+	if (bpf_object__load(obj)) {
+		fprintf(stderr, "ERROR: loading BPF object file failed\n");
+		goto cleanup;
+	}
+
+	link = bpf_program__attach(prog);
+	if (libbpf_get_error(link)) {
+		fprintf(stderr, "ERROR: bpf_program__attach failed\n");
+		link = NULL;
+		goto cleanup;
+	}
+
+	progs_fd = bpf_object__find_map_fd_by_name(obj, "progs");
+	if (progs_fd < 0) {
+		fprintf(stderr, "ERROR: finding a map in obj file failed\n");
+		goto cleanup;
+	}
+
+	bpf_object__for_each_program(prog, obj) {
+		title = bpf_program__title(prog, false);
+		/* register only syscalls to PROG_ARRAY */
+		if (sscanf(title, "kprobe/%d", &key) != 1)
+			continue;
+
+		fd = bpf_program__fd(prog);
+		bpf_map_update_elem(progs_fd, &key, &fd, BPF_ANY);
 	}
 
 	install_accept_all_seccomp();
@@ -47,5 +94,8 @@ int main(int ac, char **argv)
 
 	read_trace_pipe();
 
+cleanup:
+	bpf_link__destroy(link);
+	bpf_object__close(obj);
 	return 0;
 }
diff --git a/samples/bpf/tracex6_kern.c b/samples/bpf/tracex6_kern.c
index 96c234efa852..acad5712d8b4 100644
--- a/samples/bpf/tracex6_kern.c
+++ b/samples/bpf/tracex6_kern.c
@@ -3,24 +3,26 @@
 #include <uapi/linux/bpf.h>
 #include <bpf/bpf_helpers.h>
 
-struct bpf_map_def SEC("maps") counters = {
-	.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
-	.key_size = sizeof(int),
-	.value_size = sizeof(u32),
-	.max_entries = 64,
-};
-struct bpf_map_def SEC("maps") values = {
-	.type = BPF_MAP_TYPE_HASH,
-	.key_size = sizeof(int),
-	.value_size = sizeof(u64),
-	.max_entries = 64,
-};
-struct bpf_map_def SEC("maps") values2 = {
-	.type = BPF_MAP_TYPE_HASH,
-	.key_size = sizeof(int),
-	.value_size = sizeof(struct bpf_perf_event_value),
-	.max_entries = 64,
-};
+struct {
+	__uint(type, BPF_MAP_TYPE_PERF_EVENT_ARRAY);
+	__uint(key_size, sizeof(int));
+	__uint(value_size, sizeof(u32));
+	__uint(max_entries, 64);
+} counters SEC(".maps");
+
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH);
+	__type(key, int);
+	__type(value, u64);
+	__uint(max_entries, 64);
+} values SEC(".maps");
+
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH);
+	__type(key, int);
+	__type(value, struct bpf_perf_event_value);
+	__uint(max_entries, 64);
+} values2 SEC(".maps");
 
 SEC("kprobe/htab_map_get_next_key")
 int bpf_prog1(struct pt_regs *ctx)
diff --git a/samples/bpf/tracex6_user.c b/samples/bpf/tracex6_user.c
index 4bb3c830adb2..33df9784775d 100644
--- a/samples/bpf/tracex6_user.c
+++ b/samples/bpf/tracex6_user.c
@@ -4,7 +4,6 @@
 #include <assert.h>
 #include <fcntl.h>
 #include <linux/perf_event.h>
-#include <linux/bpf.h>
 #include <sched.h>
 #include <stdio.h>
 #include <stdlib.h>
@@ -15,12 +14,15 @@
 #include <sys/wait.h>
 #include <unistd.h>
 
-#include "bpf_load.h"
 #include <bpf/bpf.h>
+#include <bpf/libbpf.h>
 #include "perf-sys.h"
 
 #define SAMPLE_PERIOD  0x7fffffffffffffffULL
 
+/* counters, values, values2 */
+static int map_fd[3];
+
 static void check_on_cpu(int cpu, struct perf_event_attr *attr)
 {
 	struct bpf_perf_event_value value2;
@@ -174,16 +176,51 @@ static void test_bpf_perf_event(void)
 int main(int argc, char **argv)
 {
 	struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
+	struct bpf_link *links[2];
+	struct bpf_program *prog;
+	struct bpf_object *obj;
 	char filename[256];
+	int i = 0;
+
+	setrlimit(RLIMIT_MEMLOCK, &r);
 
 	snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
+	obj = bpf_object__open_file(filename, NULL);
+	if (libbpf_get_error(obj)) {
+		fprintf(stderr, "ERROR: opening BPF object file failed\n");
+		return 0;
+	}
 
-	setrlimit(RLIMIT_MEMLOCK, &r);
-	if (load_bpf_file(filename)) {
-		printf("%s", bpf_log_buf);
-		return 1;
+	/* load BPF program */
+	if (bpf_object__load(obj)) {
+		fprintf(stderr, "ERROR: loading BPF object file failed\n");
+		goto cleanup;
+	}
+
+	map_fd[0] = bpf_object__find_map_fd_by_name(obj, "counters");
+	map_fd[1] = bpf_object__find_map_fd_by_name(obj, "values");
+	map_fd[2] = bpf_object__find_map_fd_by_name(obj, "values2");
+	if (map_fd[0] < 0 || map_fd[1] < 0 || map_fd[2] < 0) {
+		fprintf(stderr, "ERROR: finding a map in obj file failed\n");
+		goto cleanup;
+	}
+
+	bpf_object__for_each_program(prog, obj) {
+		links[i] = bpf_program__attach(prog);
+		if (libbpf_get_error(links[i])) {
+			fprintf(stderr, "ERROR: bpf_program__attach failed\n");
+			links[i] = NULL;
+			goto cleanup;
+		}
+		i++;
 	}
 
 	test_bpf_perf_event();
+
+cleanup:
+	for (i--; i >= 0; i--)
+		bpf_link__destroy(links[i]);
+
+	bpf_object__close(obj);
 	return 0;
 }
diff --git a/samples/bpf/tracex7_user.c b/samples/bpf/tracex7_user.c
index ea6dae78f0df..fdcd6580dd73 100644
--- a/samples/bpf/tracex7_user.c
+++ b/samples/bpf/tracex7_user.c
@@ -1,28 +1,51 @@
 #define _GNU_SOURCE
 
 #include <stdio.h>
-#include <linux/bpf.h>
 #include <unistd.h>
-#include <bpf/bpf.h>
-#include "bpf_load.h"
+#include <bpf/libbpf.h>
 
 int main(int argc, char **argv)
 {
-	FILE *f;
+	struct bpf_link *link = NULL;
+	struct bpf_program *prog;
+	struct bpf_object *obj;
 	char filename[256];
 	char command[256];
-	int ret;
+	int ret = 0;
+	FILE *f;
 
 	snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
+	obj = bpf_object__open_file(filename, NULL);
+	if (libbpf_get_error(obj)) {
+		fprintf(stderr, "ERROR: opening BPF object file failed\n");
+		return 0;
+	}
+
+	prog = bpf_object__find_program_by_name(obj, "bpf_prog1");
+	if (!prog) {
+		fprintf(stderr, "ERROR: finding a prog in obj file failed\n");
+		goto cleanup;
+	}
+
+	/* load BPF program */
+	if (bpf_object__load(obj)) {
+		fprintf(stderr, "ERROR: loading BPF object file failed\n");
+		goto cleanup;
+	}
 
-	if (load_bpf_file(filename)) {
-		printf("%s", bpf_log_buf);
-		return 1;
+	link = bpf_program__attach(prog);
+	if (libbpf_get_error(link)) {
+		fprintf(stderr, "ERROR: bpf_program__attach failed\n");
+		link = NULL;
+		goto cleanup;
 	}
 
 	snprintf(command, 256, "mount %s tmpmnt/", argv[1]);
 	f = popen(command, "r");
 	ret = pclose(f);
 
+cleanup:
+	bpf_link__destroy(link);
+	bpf_object__close(obj);
 	return ret ? 0 : 1;
 }
diff --git a/samples/bpf/xdp_redirect_cpu_kern.c b/samples/bpf/xdp_redirect_cpu_kern.c
index 313a8fe6d125..2baf8db1f7e7 100644
--- a/samples/bpf/xdp_redirect_cpu_kern.c
+++ b/samples/bpf/xdp_redirect_cpu_kern.c
@@ -15,7 +15,7 @@
 #include <bpf/bpf_helpers.h>
 #include "hash_func01.h"
 
-#define MAX_CPUS 64 /* WARNING - sync with _user.c */
+#define MAX_CPUS NR_CPUS
 
 /* Special map type that can XDP_REDIRECT frames to another CPU */
 struct {
diff --git a/samples/bpf/xdp_redirect_cpu_user.c b/samples/bpf/xdp_redirect_cpu_user.c
index 15bdf047a222..f3468168982e 100644
--- a/samples/bpf/xdp_redirect_cpu_user.c
+++ b/samples/bpf/xdp_redirect_cpu_user.c
@@ -13,19 +13,15 @@ static const char *__doc__ =
 #include <unistd.h>
 #include <locale.h>
 #include <sys/resource.h>
+#include <sys/sysinfo.h>
 #include <getopt.h>
 #include <net/if.h>
 #include <time.h>
 #include <linux/limits.h>
 
-#define __must_check
-#include <linux/err.h>
-
 #include <arpa/inet.h>
 #include <linux/if_link.h>
 
-#define MAX_CPUS 64 /* WARNING - sync with _kern.c */
-
 /* How many xdp_progs are defined in _kern.c */
 #define MAX_PROG 6
 
@@ -40,6 +36,7 @@ static char *ifname;
 static __u32 prog_id;
 
 static __u32 xdp_flags = XDP_FLAGS_UPDATE_IF_NOEXIST;
+static int n_cpus;
 static int cpu_map_fd;
 static int rx_cnt_map_fd;
 static int redirect_err_cnt_map_fd;
@@ -170,7 +167,7 @@ struct stats_record {
 	struct record redir_err;
 	struct record kthread;
 	struct record exception;
-	struct record enq[MAX_CPUS];
+	struct record enq[];
 };
 
 static bool map_collect_percpu(int fd, __u32 key, struct record *rec)
@@ -225,10 +222,11 @@ static struct datarec *alloc_record_per_cpu(void)
 static struct stats_record *alloc_stats_record(void)
 {
 	struct stats_record *rec;
-	int i;
+	int i, size;
 
-	rec = malloc(sizeof(*rec));
-	memset(rec, 0, sizeof(*rec));
+	size = sizeof(*rec) + n_cpus * sizeof(struct record);
+	rec = malloc(size);
+	memset(rec, 0, size);
 	if (!rec) {
 		fprintf(stderr, "Mem alloc error\n");
 		exit(EXIT_FAIL_MEM);
@@ -237,7 +235,7 @@ static struct stats_record *alloc_stats_record(void)
 	rec->redir_err.cpu = alloc_record_per_cpu();
 	rec->kthread.cpu   = alloc_record_per_cpu();
 	rec->exception.cpu = alloc_record_per_cpu();
-	for (i = 0; i < MAX_CPUS; i++)
+	for (i = 0; i < n_cpus; i++)
 		rec->enq[i].cpu = alloc_record_per_cpu();
 
 	return rec;
@@ -247,7 +245,7 @@ static void free_stats_record(struct stats_record *r)
 {
 	int i;
 
-	for (i = 0; i < MAX_CPUS; i++)
+	for (i = 0; i < n_cpus; i++)
 		free(r->enq[i].cpu);
 	free(r->exception.cpu);
 	free(r->kthread.cpu);
@@ -350,7 +348,7 @@ static void stats_print(struct stats_record *stats_rec,
 	}
 
 	/* cpumap enqueue stats */
-	for (to_cpu = 0; to_cpu < MAX_CPUS; to_cpu++) {
+	for (to_cpu = 0; to_cpu < n_cpus; to_cpu++) {
 		char *fmt = "%-15s %3d:%-3d %'-14.0f %'-11.0f %'-10.2f %s\n";
 		char *fm2 = "%-15s %3s:%-3d %'-14.0f %'-11.0f %'-10.2f %s\n";
 		char *errstr = "";
@@ -475,7 +473,7 @@ static void stats_collect(struct stats_record *rec)
 	map_collect_percpu(fd, 1, &rec->redir_err);
 
 	fd = cpumap_enqueue_cnt_map_fd;
-	for (i = 0; i < MAX_CPUS; i++)
+	for (i = 0; i < n_cpus; i++)
 		map_collect_percpu(fd, i, &rec->enq[i]);
 
 	fd = cpumap_kthread_cnt_map_fd;
@@ -549,10 +547,10 @@ static int create_cpu_entry(__u32 cpu, __u32 queue_size,
  */
 static void mark_cpus_unavailable(void)
 {
-	__u32 invalid_cpu = MAX_CPUS;
+	__u32 invalid_cpu = n_cpus;
 	int ret, i;
 
-	for (i = 0; i < MAX_CPUS; i++) {
+	for (i = 0; i < n_cpus; i++) {
 		ret = bpf_map_update_elem(cpus_available_map_fd, &i,
 					  &invalid_cpu, 0);
 		if (ret) {
@@ -621,7 +619,7 @@ static struct bpf_link * attach_tp(struct bpf_object *obj,
 	}
 
 	link = bpf_program__attach_tracepoint(prog, tp_category, tp_name);
-	if (IS_ERR(link))
+	if (libbpf_get_error(link))
 		exit(EXIT_FAIL_BPF);
 
 	return link;
@@ -688,6 +686,8 @@ int main(int argc, char **argv)
 	int prog_fd;
 	__u32 qsize;
 
+	n_cpus = get_nprocs_conf();
+
 	/* Notice: choosing he queue size is very important with the
 	 * ixgbe driver, because it's driver page recycling trick is
 	 * dependend on pages being returned quickly.  The number of
@@ -757,7 +757,7 @@ int main(int argc, char **argv)
 		case 'c':
 			/* Add multiple CPUs */
 			add_cpu = strtoul(optarg, NULL, 0);
-			if (add_cpu >= MAX_CPUS) {
+			if (add_cpu >= n_cpus) {
 				fprintf(stderr,
 				"--cpu nr too large for cpumap err(%d):%s\n",
 					errno, strerror(errno));
diff --git a/samples/pktgen/README.rst b/samples/pktgen/README.rst
index 3f6483e8b2df..f9c53ca5cf93 100644
--- a/samples/pktgen/README.rst
+++ b/samples/pktgen/README.rst
@@ -3,7 +3,7 @@ Sample and benchmark scripts for pktgen (packet generator)
 This directory contains some pktgen sample and benchmark scripts, that
 can easily be copied and adjusted for your own use-case.
 
-General doc is located in kernel: Documentation/networking/pktgen.txt
+General doc is located in kernel: Documentation/networking/pktgen.rst
 
 Helper include files
 ====================