ALSA: hda: avoid write to STATESTS if controller is in reset

The snd_hdac_bus_reset_link() contains logic to clear STATESTS register
before performing controller reset. This code dates back to an old
bugfix in commit e8a7f136f5ed ("[ALSA] hda-intel - Improve HD-audio
codec probing robustness"). Originally the code was added to
azx_reset().

The code was moved around in commit a41d122449be ("ALSA: hda - Embed bus
into controller object") and ended up to snd_hdac_bus_reset_link() and
called primarily via snd_hdac_bus_init_chip().

The logic to clear STATESTS is correct when snd_hdac_bus_init_chip() is
called when controller is not in reset. In this case, STATESTS can be
cleared. This can be useful e.g. when forcing a controller reset to retry
codec probe. A normal non-power-on reset will not clear the bits.

However, this old logic is problematic when controller is already in
reset. The HDA specification states that controller must be taken out of
reset before writing to registers other than GCTL.CRST (1.0a spec,
3.3.7). The write to STATESTS in snd_hdac_bus_reset_link() will be lost
if the controller is already in reset per the HDA specification mentioned.

This has been harmless on older hardware. On newer generation of Intel
PCIe based HDA controllers, if configured to report issues, this write
will emit an unsupported request error. If ACPI Platform Error Interface
(APEI) is enabled in kernel, this will end up to kernel log.

Fix the code in snd_hdac_bus_reset_link() to only clear the STATESTS if
the function is called when controller is not in reset. Otherwise
clearing the bits is not possible and should be skipped.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211012142935.3731820-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 3 insertions, 2 deletions

diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c
index 062da7a7a586..f7bd6e2db085 100644
--- a/sound/hda/hdac_controller.c
+++ b/sound/hda/hdac_controller.c
@@ -421,8 +421,9 @@ int snd_hdac_bus_reset_link(struct hdac_bus *bus, bool full_reset)
 	if (!full_reset)
 		goto skip_reset;
 
-	/* clear STATESTS */
-	snd_hdac_chip_writew(bus, STATESTS, STATESTS_INT_MASK);
+	/* clear STATESTS if not in reset */
+	if (snd_hdac_chip_readb(bus, GCTL) & AZX_GCTL_RESET)
+		snd_hdac_chip_writew(bus, STATESTS, STATESTS_INT_MASK);
 
 	/* reset controller */
 	snd_hdac_bus_enter_link_reset(bus);