Annotate hardware config module parameters in sound/isa/

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in sound/isa/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jaroslav Kysela <perex@perex.cz>
cc: Takashi Iwai <tiwai@suse.com>
cc: alsa-devel@alsa-project.org

1 files changed, 7 insertions, 7 deletions

diff --git a/sound/isa/sb/sb16.c b/sound/isa/sb/sb16.c
index 4a7d7c89808f..3b2e4f405ff2 100644
--- a/sound/isa/sb/sb16.c
+++ b/sound/isa/sb/sb16.c
@@ -99,21 +99,21 @@ MODULE_PARM_DESC(enable, "Enable SoundBlaster 16 soundcard.");
 module_param_array(isapnp, bool, NULL, 0444);
 MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard.");
 #endif
-module_param_array(port, long, NULL, 0444);
+module_param_hw_array(port, long, ioport, NULL, 0444);
 MODULE_PARM_DESC(port, "Port # for SB16 driver.");
-module_param_array(mpu_port, long, NULL, 0444);
+module_param_hw_array(mpu_port, long, ioport, NULL, 0444);
 MODULE_PARM_DESC(mpu_port, "MPU-401 port # for SB16 driver.");
-module_param_array(fm_port, long, NULL, 0444);
+module_param_hw_array(fm_port, long, ioport, NULL, 0444);
 MODULE_PARM_DESC(fm_port, "FM port # for SB16 PnP driver.");
 #ifdef SNDRV_SBAWE_EMU8000
-module_param_array(awe_port, long, NULL, 0444);
+module_param_hw_array(awe_port, long, ioport, NULL, 0444);
 MODULE_PARM_DESC(awe_port, "AWE port # for SB16 PnP driver.");
 #endif
-module_param_array(irq, int, NULL, 0444);
+module_param_hw_array(irq, int, irq, NULL, 0444);
 MODULE_PARM_DESC(irq, "IRQ # for SB16 driver.");
-module_param_array(dma8, int, NULL, 0444);
+module_param_hw_array(dma8, int, dma, NULL, 0444);
 MODULE_PARM_DESC(dma8, "8-bit DMA # for SB16 driver.");
-module_param_array(dma16, int, NULL, 0444);
+module_param_hw_array(dma16, int, dma, NULL, 0444);
 MODULE_PARM_DESC(dma16, "16-bit DMA # for SB16 driver.");
 module_param_array(mic_agc, int, NULL, 0444);
 MODULE_PARM_DESC(mic_agc, "Mic Auto-Gain-Control switch.");