diff options
author | Krzysztof Helt <krzysztof.h1@wp.pl> | 2009-01-09 23:10:52 +0100 |
---|---|---|
committer | Takashi Iwai <tiwai@suse.de> | 2009-01-11 13:09:05 +0100 |
commit | 199f7978730a4bbd88038fd84212b30759579f1a (patch) | |
tree | ee3deea40e2db5a38967fce16cb55a3b6103d154 /sound/isa/wss | |
parent | Linux 2.6.29-rc1 (diff) | |
download | linux-199f7978730a4bbd88038fd84212b30759579f1a.tar.xz linux-199f7978730a4bbd88038fd84212b30759579f1a.zip |
ALSA: wss-lib: move AD1845 frequency setting into wss-lib
This is required to allow the sscape driver
to autodetect installed codec.
Also, do not create a timer if detected codec
has no hardware timer (e.g. AD1848).
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Rene Herman
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/isa/wss')
-rw-r--r-- | sound/isa/wss/wss_lib.c | 40 |
1 files changed, 40 insertions, 0 deletions
diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c index 3d6c5f2838af..13299aebd077 100644 --- a/sound/isa/wss/wss_lib.c +++ b/sound/isa/wss/wss_lib.c @@ -646,6 +646,24 @@ static void snd_wss_playback_format(struct snd_wss *chip, full_calib = 0; } spin_unlock_irqrestore(&chip->reg_lock, flags); + } else if (chip->hardware == WSS_HW_AD1845) { + unsigned rate = params_rate(params); + + /* + * Program the AD1845 correctly for the playback stream. + * Note that we do NOT need to toggle the MCE bit because + * the PLAYBACK_ENABLE bit of the Interface Configuration + * register is set. + * + * NOTE: We seem to need to write to the MSB before the LSB + * to get the correct sample frequency. + */ + spin_lock_irqsave(&chip->reg_lock, flags); + snd_wss_out(chip, CS4231_PLAYBK_FORMAT, (pdfr & 0xf0)); + snd_wss_out(chip, AD1845_UPR_FREQ_SEL, (rate >> 8) & 0xff); + snd_wss_out(chip, AD1845_LWR_FREQ_SEL, rate & 0xff); + full_calib = 0; + spin_unlock_irqrestore(&chip->reg_lock, flags); } if (full_calib) { snd_wss_mce_up(chip); @@ -690,6 +708,24 @@ static void snd_wss_capture_format(struct snd_wss *chip, full_calib = 0; } spin_unlock_irqrestore(&chip->reg_lock, flags); + } else if (chip->hardware == WSS_HW_AD1845) { + unsigned rate = params_rate(params); + + /* + * Program the AD1845 correctly for the capture stream. + * Note that we do NOT need to toggle the MCE bit because + * the PLAYBACK_ENABLE bit of the Interface Configuration + * register is set. + * + * NOTE: We seem to need to write to the MSB before the LSB + * to get the correct sample frequency. + */ + spin_lock_irqsave(&chip->reg_lock, flags); + snd_wss_out(chip, CS4231_REC_FORMAT, (cdfr & 0xf0)); + snd_wss_out(chip, AD1845_UPR_FREQ_SEL, (rate >> 8) & 0xff); + snd_wss_out(chip, AD1845_LWR_FREQ_SEL, rate & 0xff); + full_calib = 0; + spin_unlock_irqrestore(&chip->reg_lock, flags); } if (full_calib) { snd_wss_mce_up(chip); @@ -1314,6 +1350,10 @@ static int snd_wss_probe(struct snd_wss *chip) chip->image[CS4231_ALT_FEATURE_2] = chip->hardware == WSS_HW_INTERWAVE ? 0xc2 : 0x01; } + /* enable fine grained frequency selection */ + if (chip->hardware == WSS_HW_AD1845) + chip->image[AD1845_PWR_DOWN] = 8; + ptr = (unsigned char *) &chip->image; regnum = (chip->hardware & WSS_HW_AD1848_MASK) ? 16 : 32; snd_wss_mce_down(chip); |