ALSA: echoaudio: remove all snd_printk

removed all references of snd_printk with the standard dev_* macro.

[a few places degraded to dev_dbg(), too -- tiwai]

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 18 insertions, 14 deletions

diff --git a/sound/pci/echoaudio/echoaudio_3g.c b/sound/pci/echoaudio/echoaudio_3g.c
index 658db44ef746..50a21690447d 100644
--- a/sound/pci/echoaudio/echoaudio_3g.c
+++ b/sound/pci/echoaudio/echoaudio_3g.c
@@ -51,7 +51,7 @@ static int check_asic_status(struct echoaudio *chip)
 	}
 
 	box_status = le32_to_cpu(chip->comm_page->ext_box_status);
-	DE_INIT(("box_status=%x\n", box_status));
+	dev_dbg(chip->card->dev, "box_status=%x\n", box_status);
 	if (box_status == E3G_ASIC_NOT_LOADED)
 		return -ENODEV;
 
@@ -76,7 +76,8 @@ static int write_control_reg(struct echoaudio *chip, u32 ctl, u32 frq,
 	if (wait_handshake(chip))
 		return -EIO;
 
-	DE_ACT(("WriteControlReg: Setting 0x%x, 0x%x\n", ctl, frq));
+	dev_dbg(chip->card->dev,
+		"WriteControlReg: Setting 0x%x, 0x%x\n", ctl, frq);
 
 	ctl = cpu_to_le32(ctl);
 	frq = cpu_to_le32(frq);
@@ -89,7 +90,7 @@ static int write_control_reg(struct echoaudio *chip, u32 ctl, u32 frq,
 		return send_vector(chip, DSP_VC_WRITE_CONTROL_REG);
 	}
 
-	DE_ACT(("WriteControlReg: not written, no change\n"));
+	dev_dbg(chip->card->dev, "WriteControlReg: not written, no change\n");
 	return 0;
 }
 
@@ -258,8 +259,8 @@ static int set_sample_rate(struct echoaudio *chip, u32 rate)
 
 	/* Only set the clock for internal mode. */
 	if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
-		DE_ACT(("set_sample_rate: Cannot set sample rate - "
-			"clock not set to CLK_CLOCKININTERNAL\n"));
+		dev_warn(chip->card->dev,
+			 "Cannot set sample rate - clock not set to CLK_CLOCKININTERNAL\n");
 		/* Save the rate anyhow */
 		chip->comm_page->sample_rate = cpu_to_le32(rate);
 		chip->sample_rate = rate;
@@ -313,7 +314,8 @@ static int set_sample_rate(struct echoaudio *chip, u32 rate)
 
 	chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP */
 	chip->sample_rate = rate;
-	DE_ACT(("SetSampleRate: %d clock %x\n", rate, control_reg));
+	dev_dbg(chip->card->dev,
+		"SetSampleRate: %d clock %x\n", rate, control_reg);
 
 	/* Tell the DSP about it - DSP reads both control reg & freq reg */
 	return write_control_reg(chip, control_reg, frq_reg, 0);
@@ -326,7 +328,7 @@ static int set_input_clock(struct echoaudio *chip, u16 clock)
 {
 	u32 control_reg, clocks_from_dsp;
 
-	DE_ACT(("set_input_clock:\n"));
+	dev_dbg(chip->card->dev, "set_input_clock:\n");
 
 	/* Mask off the clock select bits */
 	control_reg = le32_to_cpu(chip->comm_page->control_register) &
@@ -335,13 +337,13 @@ static int set_input_clock(struct echoaudio *chip, u16 clock)
 
 	switch (clock) {
 	case ECHO_CLOCK_INTERNAL:
-		DE_ACT(("Set Echo3G clock to INTERNAL\n"));
+		dev_dbg(chip->card->dev, "Set Echo3G clock to INTERNAL\n");
 		chip->input_clock = ECHO_CLOCK_INTERNAL;
 		return set_sample_rate(chip, chip->sample_rate);
 	case ECHO_CLOCK_SPDIF:
 		if (chip->digital_mode == DIGITAL_MODE_ADAT)
 			return -EAGAIN;
-		DE_ACT(("Set Echo3G clock to SPDIF\n"));
+		dev_dbg(chip->card->dev, "Set Echo3G clock to SPDIF\n");
 		control_reg |= E3G_SPDIF_CLOCK;
 		if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_SPDIF96)
 			control_reg |= E3G_DOUBLE_SPEED_MODE;
@@ -351,12 +353,12 @@ static int set_input_clock(struct echoaudio *chip, u16 clock)
 	case ECHO_CLOCK_ADAT:
 		if (chip->digital_mode != DIGITAL_MODE_ADAT)
 			return -EAGAIN;
-		DE_ACT(("Set Echo3G clock to ADAT\n"));
+		dev_dbg(chip->card->dev, "Set Echo3G clock to ADAT\n");
 		control_reg |= E3G_ADAT_CLOCK;
 		control_reg &= ~E3G_DOUBLE_SPEED_MODE;
 		break;
 	case ECHO_CLOCK_WORD:
-		DE_ACT(("Set Echo3G clock to WORD\n"));
+		dev_dbg(chip->card->dev, "Set Echo3G clock to WORD\n");
 		control_reg |= E3G_WORD_CLOCK;
 		if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_WORD96)
 			control_reg |= E3G_DOUBLE_SPEED_MODE;
@@ -364,7 +366,8 @@ static int set_input_clock(struct echoaudio *chip, u16 clock)
 			control_reg &= ~E3G_DOUBLE_SPEED_MODE;
 		break;
 	default:
-		DE_ACT(("Input clock 0x%x not supported for Echo3G\n", clock));
+		dev_err(chip->card->dev,
+			"Input clock 0x%x not supported for Echo3G\n", clock);
 		return -EINVAL;
 	}
 
@@ -392,7 +395,8 @@ static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
 			incompatible_clock = TRUE;
 		break;
 	default:
-		DE_ACT(("Digital mode not supported: %d\n", mode));
+		dev_err(chip->card->dev,
+			"Digital mode not supported: %d\n", mode);
 		return -EINVAL;
 	}
 
@@ -427,6 +431,6 @@ static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
 		return err;
 	chip->digital_mode = mode;
 
-	DE_ACT(("set_digital_mode(%d)\n", chip->digital_mode));
+	dev_dbg(chip->card->dev, "set_digital_mode(%d)\n", chip->digital_mode);
 	return incompatible_clock;
 }