ALSA: hda/ca0132 - Add full-range speaker selection controls.

Add functions for setting full-range speakers and controls to
enable/disable the setting. Setting a speaker to full-range means that
the channels won't have their bass redirected to the LFE channel.

Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20200825201040.30339-5-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 117 insertions, 0 deletions

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 1a5fb30b69ab..469cefe9a51a 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -147,6 +147,8 @@ enum {
 	AE5_SOUND_FILTER_ENUM,
 	ZXR_HEADPHONE_GAIN,
 	SPEAKER_CHANNEL_CFG_ENUM,
+	SPEAKER_FULL_RANGE_FRONT,
+	SPEAKER_FULL_RANGE_REAR,
 #define EFFECTS_COUNT  (EFFECT_END_NID - EFFECT_START_NID)
 };
 
@@ -593,6 +595,24 @@ static const struct ct_eq_preset ca0132_alt_eq_presets[] = {
 };
 
 /*
+ * DSP reqs for handling full-range speakers/bass redirection. If a speaker is
+ * set as not being full range, and bass redirection is enabled, all
+ * frequencies below the crossover frequency are redirected to the LFE
+ * channel. If the surround configuration has no LFE channel, this can't be
+ * enabled. X-Bass must be disabled when using these.
+ */
+enum speaker_range_reqs {
+	SPEAKER_BASS_REDIRECT            = 0x15,
+	SPEAKER_BASS_REDIRECT_XOVER_FREQ = 0x16,
+	/* Between 0x16-0x1a are the X-Bass reqs. */
+	SPEAKER_FULL_RANGE_FRONT_L_R     = 0x1a,
+	SPEAKER_FULL_RANGE_CENTER_LFE    = 0x1b,
+	SPEAKER_FULL_RANGE_REAR_L_R      = 0x1c,
+	SPEAKER_FULL_RANGE_SURROUND_L_R  = 0x1d,
+	SPEAKER_BASS_REDIRECT_SUB_GAIN   = 0x1e,
+};
+
+/*
  * Definitions for the DSP req's to handle speaker tuning. These all belong to
  * module ID 0x96, the output effects module.
  */
@@ -1100,6 +1120,7 @@ struct ca0132_spec {
 	unsigned char in_enum_val;
 	unsigned char out_enum_val;
 	unsigned char channel_cfg_val;
+	unsigned char speaker_range_val[2];
 	unsigned char mic_boost_enum_val;
 	unsigned char smart_volume_setting;
 	long fx_ctl_val[EFFECT_LEVEL_SLIDERS];
@@ -4259,6 +4280,50 @@ static void ae5_mmio_select_out(struct hda_codec *codec)
 			ae5_ca0113_output_presets[spec->cur_out_type].vals[i]);
 }
 
+static int ca0132_alt_set_full_range_speaker(struct hda_codec *codec)
+{
+	struct ca0132_spec *spec = codec->spec;
+	unsigned int tmp;
+	int err;
+
+	/* 2.0/4.0 setup has no LFE channel, so setting full-range does nothing. */
+	if (spec->channel_cfg_val == SPEAKER_CHANNELS_4_0
+			|| spec->channel_cfg_val == SPEAKER_CHANNELS_2_0)
+		return 0;
+
+	/* Set front L/R full range. Zero for full-range, one for redirection. */
+	tmp = spec->speaker_range_val[0] ? FLOAT_ZERO : FLOAT_ONE;
+	err = dspio_set_uint_param(codec, 0x96,
+			SPEAKER_FULL_RANGE_FRONT_L_R, tmp);
+	if (err < 0)
+		return err;
+
+	/* When setting full-range rear, both rear and center/lfe are set. */
+	tmp = spec->speaker_range_val[1] ? FLOAT_ZERO : FLOAT_ONE;
+	err = dspio_set_uint_param(codec, 0x96,
+			SPEAKER_FULL_RANGE_CENTER_LFE, tmp);
+	if (err < 0)
+		return err;
+
+	err = dspio_set_uint_param(codec, 0x96,
+			SPEAKER_FULL_RANGE_REAR_L_R, tmp);
+	if (err < 0)
+		return err;
+
+	/*
+	 * Only the AE series cards set this value when setting full-range,
+	 * and it's always 1.0f.
+	 */
+	if (ca0132_quirk(spec) == QUIRK_AE5) {
+		err = dspio_set_uint_param(codec, 0x96,
+				SPEAKER_FULL_RANGE_SURROUND_L_R, FLOAT_ONE);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
 /*
  * These are the commands needed to setup output on each of the different card
  * types.
@@ -4539,6 +4604,9 @@ static int ca0132_alt_select_out(struct hda_codec *codec)
 			goto exit;
 	}
 
+	if (spec->cur_out_type == SURROUND_OUT)
+		err = ca0132_alt_set_full_range_speaker(codec);
+
 exit:
 	snd_hda_power_down_pm(codec);
 
@@ -5269,6 +5337,7 @@ static int ca0132_alt_xbass_xover_slider_ctl_get(struct snd_kcontrol *kcontrol,
 	long *valp = ucontrol->value.integer.value;
 
 	*valp = spec->xbass_xover_freq;
+
 	return 0;
 }
 
@@ -5894,6 +5963,11 @@ static int ca0132_switch_get(struct snd_kcontrol *kcontrol,
 		return 0;
 	}
 
+	if (nid == SPEAKER_FULL_RANGE_FRONT || nid == SPEAKER_FULL_RANGE_REAR) {
+		*valp = spec->speaker_range_val[nid - SPEAKER_FULL_RANGE_FRONT];
+		return 0;
+	}
+
 	return 0;
 }
 
@@ -5972,6 +6046,14 @@ static int ca0132_switch_put(struct snd_kcontrol *kcontrol,
 		goto exit;
 	}
 
+	if (nid == SPEAKER_FULL_RANGE_FRONT || nid == SPEAKER_FULL_RANGE_REAR) {
+		spec->speaker_range_val[nid - SPEAKER_FULL_RANGE_FRONT] = *valp;
+		if (spec->cur_out_type == SURROUND_OUT)
+			ca0132_alt_set_full_range_speaker(codec);
+
+		changed = 0;
+	}
+
 exit:
 	snd_hda_power_down(codec);
 	return changed;
@@ -6330,6 +6412,31 @@ static int ca0132_alt_add_speaker_channel_cfg_enum(struct hda_codec *codec)
 }
 
 /*
+ * Full range front stereo and rear surround switches. When these are set to
+ * full range, the lower frequencies from these channels are no longer
+ * redirected to the LFE channel.
+ */
+static int ca0132_alt_add_front_full_range_switch(struct hda_codec *codec)
+{
+	struct snd_kcontrol_new knew =
+		CA0132_CODEC_MUTE_MONO("Full-Range Front Speakers",
+				    SPEAKER_FULL_RANGE_FRONT, 1, HDA_OUTPUT);
+
+	return snd_hda_ctl_add(codec, SPEAKER_FULL_RANGE_FRONT,
+				snd_ctl_new1(&knew, codec));
+}
+
+static int ca0132_alt_add_rear_full_range_switch(struct hda_codec *codec)
+{
+	struct snd_kcontrol_new knew =
+		CA0132_CODEC_MUTE_MONO("Full-Range Rear Speakers",
+				    SPEAKER_FULL_RANGE_REAR, 1, HDA_OUTPUT);
+
+	return snd_hda_ctl_add(codec, SPEAKER_FULL_RANGE_REAR,
+				snd_ctl_new1(&knew, codec));
+}
+
+/*
  * Create an Input Source enumerated control for the alternate ca0132 codecs
  * because the front microphone has no auto-detect, and Line-in has to be set
  * somehow.
@@ -6638,6 +6745,12 @@ static int ca0132_build_controls(struct hda_codec *codec)
 		err = ca0132_alt_add_speaker_channel_cfg_enum(codec);
 		if (err < 0)
 			return err;
+		err = ca0132_alt_add_front_full_range_switch(codec);
+		if (err < 0)
+			return err;
+		err = ca0132_alt_add_rear_full_range_switch(codec);
+		if (err < 0)
+			return err;
 		err = ca0132_alt_add_mic_boost_enum(codec);
 		if (err < 0)
 			return err;
@@ -7982,6 +8095,10 @@ static void ca0132_init_chip(struct hda_codec *codec)
 	 * ca0132 codecs. Also sets x-bass crossover frequency to 80hz.
 	 */
 	if (ca0132_use_alt_controls(spec)) {
+		/* Set speakers to default to full range. */
+		spec->speaker_range_val[0] = 1;
+		spec->speaker_range_val[1] = 1;
+
 		spec->xbass_xover_freq = 8;
 		for (i = 0; i < EFFECT_LEVEL_SLIDERS; i++)
 			spec->fx_ctl_val[i] = effect_slider_defaults[i];