ASoC: UDA134x codec driver

Signed-off-by: Christian Pellegrin <chripell@fsfe.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

1 files changed, 91 insertions, 0 deletions

diff --git a/sound/soc/codecs/l3.c b/sound/soc/codecs/l3.c
new file mode 100644
index 000000000000..5353af58862c
--- /dev/null
+++ b/sound/soc/codecs/l3.c
@@ -0,0 +1,91 @@
+/*
+ * L3 code
+ *
+ *  Copyright (C) 2008, Christian Pellegrin <chripell@evolware.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * based on:
+ *
+ * L3 bus algorithm module.
+ *
+ *  Copyright (C) 2001 Russell King, All Rights Reserved.
+ *
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+
+#include <sound/l3.h>
+
+/*
+ * Send one byte of data to the chip.  Data is latched into the chip on
+ * the rising edge of the clock.
+ */
+static void sendbyte(struct l3_pins *adap, unsigned int byte)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		adap->setclk(0);
+		udelay(adap->data_hold);
+		adap->setdat(byte & 1);
+		udelay(adap->data_setup);
+		adap->setclk(1);
+		udelay(adap->clock_high);
+		byte >>= 1;
+	}
+}
+
+/*
+ * Send a set of bytes to the chip.  We need to pulse the MODE line
+ * between each byte, but never at the start nor at the end of the
+ * transfer.
+ */
+static void sendbytes(struct l3_pins *adap, const u8 *buf,
+		      int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		if (i) {
+			udelay(adap->mode_hold);
+			adap->setmode(0);
+			udelay(adap->mode);
+		}
+		adap->setmode(1);
+		udelay(adap->mode_setup);
+		sendbyte(adap, buf[i]);
+	}
+}
+
+int l3_write(struct l3_pins *adap, u8 addr, u8 *data, int len)
+{
+	adap->setclk(1);
+	adap->setdat(1);
+	adap->setmode(1);
+	udelay(adap->mode);
+
+	adap->setmode(0);
+	udelay(adap->mode_setup);
+	sendbyte(adap, addr);
+	udelay(adap->mode_hold);
+
+	sendbytes(adap, data, len);
+
+	adap->setclk(1);
+	adap->setdat(1);
+	adap->setmode(0);
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(l3_write);
+
+MODULE_DESCRIPTION("L3 bit-banging driver");
+MODULE_AUTHOR("Christian Pellegrin <chripell@evolware.org>");
+MODULE_LICENSE("GPL");