Merge tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "No surprises in this development cycle, and most of work is about the
  fixes and the improvements of the existing code, while a new LED
  control layer and a few new drivers have been introduced.

  Here are some highlights:

  Core:
   - A common mute-LED framework was introduced. It is used by HD-audio
     for now, more adaption will follow later. The former "Mic Mute-LED
     Mode" mixer control has been replaced with the corresponding sysfs
     now.
   - User-control management was changed to count consumed bytes instead
     of capping by number of elements; this will allow more controls in
     the normal usage pattern while avoiding the possible memory
     exhaustion DoS

  ASoC:
   - Continued refactoring and cleanups in ASoC core and generic card
     drivers
   - Wide range of small cppcheck and warning fixes
   - New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
     accessory detection, and Realtek RT1019, RT1316, RT711 and RT715

  USB-audio:
   - Continued improvements and fixes of the implicit feedback mode,
     including better support for Pioneer and Roland/BOSS devices

  HD-audio:
   - Default back to non-buffer preallocation on x86
   - Cirrus codec improvements, more quirks for Realtek codecs

  Others:
   - New virtio sound driver
   - FireWire Bebob updates"

* tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits)
  ALSA: hda/conexant: Re-order CX5066 quirk table entries
  ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
  ALSA: hda/realtek: Re-order ALC662 quirk table entries
  ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
  ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries
  ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries
  ALSA: hda/realtek: Re-order ALC269 HP quirk table entries
  ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries
  ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
  ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
  ALSA: usb-audio: Remove redundant assignment to len
  ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx
  ALSA: virtio: fix kernel-doc
  ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
  ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
  ALSA: sb: Fix two use after free in snd_sb_qsound_build
  ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
  ...

1 files changed, 21 insertions, 13 deletions

diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c
index 8abe232ca4a4..802f4851c3df 100644
--- a/sound/soc/codecs/rt286.c
+++ b/sound/soc/codecs/rt286.c
@@ -171,6 +171,9 @@ static bool rt286_readable_register(struct device *dev, unsigned int reg)
 	case RT286_PROC_COEF:
 	case RT286_SET_AMP_GAIN_ADC_IN1:
 	case RT286_SET_AMP_GAIN_ADC_IN2:
+	case RT286_SET_GPIO_MASK:
+	case RT286_SET_GPIO_DIRECTION:
+	case RT286_SET_GPIO_DATA:
 	case RT286_SET_POWER(RT286_DAC_OUT1):
 	case RT286_SET_POWER(RT286_DAC_OUT2):
 	case RT286_SET_POWER(RT286_ADC_IN1):
@@ -252,11 +255,16 @@ static int rt286_jack_detect(struct rt286_priv *rt286, bool *hp, bool *mic)
 				msleep(300);
 				regmap_read(rt286->regmap,
 					RT286_CBJ_CTRL2, &val);
-				if (0x0070 == (val & 0x0070))
+				if (0x0070 == (val & 0x0070)) {
 					*mic = true;
-				else
+				} else {
 					*mic = false;
+					regmap_update_bits(rt286->regmap,
+						RT286_CBJ_CTRL1,
+						0xfcc0, 0xc400);
+				}
 			}
+
 			regmap_update_bits(rt286->regmap,
 				RT286_DC_GAIN, 0x200, 0x0);
 
@@ -1117,12 +1125,11 @@ static const struct dmi_system_id force_combo_jack_table[] = {
 	{ }
 };
 
-static const struct dmi_system_id dmi_dell_dino[] = {
+static const struct dmi_system_id dmi_dell[] = {
 	{
-		.ident = "Dell Dino",
+		.ident = "Dell",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9343")
 		}
 	},
 	{ }
@@ -1133,7 +1140,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
 {
 	struct rt286_platform_data *pdata = dev_get_platdata(&i2c->dev);
 	struct rt286_priv *rt286;
-	int i, ret, val;
+	int i, ret, vendor_id;
 
 	rt286 = devm_kzalloc(&i2c->dev,	sizeof(*rt286),
 				GFP_KERNEL);
@@ -1149,14 +1156,15 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
 	}
 
 	ret = regmap_read(rt286->regmap,
-		RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &val);
+		RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &vendor_id);
 	if (ret != 0) {
 		dev_err(&i2c->dev, "I2C error %d\n", ret);
 		return ret;
 	}
-	if (val != RT286_VENDOR_ID && val != RT288_VENDOR_ID) {
+	if (vendor_id != RT286_VENDOR_ID && vendor_id != RT288_VENDOR_ID) {
 		dev_err(&i2c->dev,
-			"Device with ID register %#x is not rt286\n", val);
+			"Device with ID register %#x is not rt286\n",
+			vendor_id);
 		return -ENODEV;
 	}
 
@@ -1180,8 +1188,8 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
 	if (pdata)
 		rt286->pdata = *pdata;
 
-	if (dmi_check_system(force_combo_jack_table) ||
-		dmi_check_system(dmi_dell_dino))
+	if ((vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) ||
+		dmi_check_system(force_combo_jack_table))
 		rt286->pdata.cbj_en = true;
 
 	regmap_write(rt286->regmap, RT286_SET_AUDIO_POWER, AC_PWRST_D3);
@@ -1204,7 +1212,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
 	mdelay(10);
 
 	if (!rt286->pdata.gpio2_en)
-		regmap_write(rt286->regmap, RT286_SET_DMIC2_DEFAULT, 0x4000);
+		regmap_write(rt286->regmap, RT286_SET_DMIC2_DEFAULT, 0x40);
 	else
 		regmap_write(rt286->regmap, RT286_SET_DMIC2_DEFAULT, 0);
 
@@ -1220,7 +1228,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
 	regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL3, 0xf777, 0x4737);
 	regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL4, 0x00ff, 0x003f);
 
-	if (dmi_check_system(dmi_dell_dino)) {
+	if (vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) {
 		regmap_update_bits(rt286->regmap,
 			RT286_SET_GPIO_MASK, 0x40, 0x40);
 		regmap_update_bits(rt286->regmap,