diff options
| author | Lars-Peter Clausen <lars@metafoo.de> | 2011-09-27 11:08:48 +0200 |
|---|---|---|
| committer | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2011-09-27 14:30:48 +0200 |
| commit | 02890535269338a6d2034ad3ce8b22beb24b449a (patch) | |
| tree | 2832216154fafb2530c3e3f5a9b0d9035d975ff9 /sound/soc/codecs/ssm2602.h | |
| parent | ASoC: ssm2602: Set initial bias level to standby (diff) | |
| download | linux-02890535269338a6d2034ad3ce8b22beb24b449a.tar.xz linux-02890535269338a6d2034ad3ce8b22beb24b449a.zip | |
ASoC: ssm2602: Support setting the oscillator and the clock output state
Currently the oscillator is always enabled and the clock output is always
disabled. This patch adds support for controlling the oscillator and clock
output state through snd_soc_dai_set_sysclk. Which makes it possible to
disable or enable them dynamically according to the requirements of the board
on which the CODEC is used.
This patch also slightly modifies the behavior as to when the oscillator is
going to be disabled in low-power states. Previously it would only be disabled
in BIAS_OFF, now it is also going to be disabled in BIAS_STANDBY, since no
components which depend on it should be active in this state.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'sound/soc/codecs/ssm2602.h')
| -rw-r--r-- | sound/soc/codecs/ssm2602.h | 6 |
1 files changed, 5 insertions, 1 deletions
diff --git a/sound/soc/codecs/ssm2602.h b/sound/soc/codecs/ssm2602.h index b98c69168036..fbd07d7b73ca 100644 --- a/sound/soc/codecs/ssm2602.h +++ b/sound/soc/codecs/ssm2602.h @@ -116,6 +116,10 @@ #define SSM2602_CACHEREGNUM 10 -#define SSM2602_SYSCLK 0 +enum ssm2602_clk { + SSM2602_SYSCLK, + SSM2602_CLK_CLKOUT, + SSM2602_CLK_XTO +}; #endif |