ASoC: Samsung: Rename from s3c24xx to samsung

Finally, move the 's3c24xx' directory to 'samsung'

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

1 files changed, 0 insertions, 367 deletions

diff --git a/sound/soc/s3c24xx/s3c24xx_uda134x.c b/sound/soc/s3c24xx/s3c24xx_uda134x.c
deleted file mode 100644
index cdc8ecbcb8ef..000000000000
--- a/sound/soc/s3c24xx/s3c24xx_uda134x.c
+++ /dev/null
@@ -1,367 +0,0 @@
-/*
- * Modifications by Christian Pellegrin <chripell@evolware.org>
- *
- * s3c24xx_uda134x.c  --  S3C24XX_UDA134X ALSA SoC Audio board driver
- *
- * Copyright 2007 Dension Audio Systems Ltd.
- * Author: Zoltan Devai
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-#include <sound/s3c24xx_uda134x.h>
-#include <sound/uda134x.h>
-
-#include <plat/regs-iis.h>
-
-#include "dma.h"
-#include "s3c24xx-i2s.h"
-#include "../codecs/uda134x.h"
-
-
-/* #define ENFORCE_RATES 1 */
-/*
-  Unfortunately the S3C24XX in master mode has a limited capacity of
-  generating the clock for the codec. If you define this only rates
-  that are really available will be enforced. But be careful, most
-  user level application just want the usual sampling frequencies (8,
-  11.025, 22.050, 44.1 kHz) and anyway resampling is a costly
-  operation for embedded systems. So if you aren't very lucky or your
-  hardware engineer wasn't very forward-looking it's better to leave
-  this undefined. If you do so an approximate value for the requested
-  sampling rate in the range -/+ 5% will be chosen. If this in not
-  possible an error will be returned.
-*/
-
-static struct clk *xtal;
-static struct clk *pclk;
-/* this is need because we don't have a place where to keep the
- * pointers to the clocks in each substream. We get the clocks only
- * when we are actually using them so we don't block stuff like
- * frequency change or oscillator power-off */
-static int clk_users;
-static DEFINE_MUTEX(clk_lock);
-
-static unsigned int rates[33 * 2];
-#ifdef ENFORCE_RATES
-static struct snd_pcm_hw_constraint_list hw_constraints_rates = {
-	.count	= ARRAY_SIZE(rates),
-	.list	= rates,
-	.mask	= 0,
-};
-#endif
-
-static struct platform_device *s3c24xx_uda134x_snd_device;
-
-static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream)
-{
-	int ret = 0;
-#ifdef ENFORCE_RATES
-	struct snd_pcm_runtime *runtime = substream->runtime;
-#endif
-
-	mutex_lock(&clk_lock);
-	pr_debug("%s %d\n", __func__, clk_users);
-	if (clk_users == 0) {
-		xtal = clk_get(&s3c24xx_uda134x_snd_device->dev, "xtal");
-		if (!xtal) {
-			printk(KERN_ERR "%s cannot get xtal\n", __func__);
-			ret = -EBUSY;
-		} else {
-			pclk = clk_get(&s3c24xx_uda134x_snd_device->dev,
-				       "pclk");
-			if (!pclk) {
-				printk(KERN_ERR "%s cannot get pclk\n",
-				       __func__);
-				clk_put(xtal);
-				ret = -EBUSY;
-			}
-		}
-		if (!ret) {
-			int i, j;
-
-			for (i = 0; i < 2; i++) {
-				int fs = i ? 256 : 384;
-
-				rates[i*33] = clk_get_rate(xtal) / fs;
-				for (j = 1; j < 33; j++)
-					rates[i*33 + j] = clk_get_rate(pclk) /
-						(j * fs);
-			}
-		}
-	}
-	clk_users += 1;
-	mutex_unlock(&clk_lock);
-	if (!ret) {
-#ifdef ENFORCE_RATES
-		ret = snd_pcm_hw_constraint_list(runtime, 0,
-						 SNDRV_PCM_HW_PARAM_RATE,
-						 &hw_constraints_rates);
-		if (ret < 0)
-			printk(KERN_ERR "%s cannot set constraints\n",
-			       __func__);
-#endif
-	}
-	return ret;
-}
-
-static void s3c24xx_uda134x_shutdown(struct snd_pcm_substream *substream)
-{
-	mutex_lock(&clk_lock);
-	pr_debug("%s %d\n", __func__, clk_users);
-	clk_users -= 1;
-	if (clk_users == 0) {
-		clk_put(xtal);
-		xtal = NULL;
-		clk_put(pclk);
-		pclk = NULL;
-	}
-	mutex_unlock(&clk_lock);
-}
-
-static int s3c24xx_uda134x_hw_params(struct snd_pcm_substream *substream,
-					struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	unsigned int clk = 0;
-	int ret = 0;
-	int clk_source, fs_mode;
-	unsigned long rate = params_rate(params);
-	long err, cerr;
-	unsigned int div;
-	int i, bi;
-
-	err = 999999;
-	bi = 0;
-	for (i = 0; i < 2*33; i++) {
-		cerr = rates[i] - rate;
-		if (cerr < 0)
-			cerr = -cerr;
-		if (cerr < err) {
-			err = cerr;
-			bi = i;
-		}
-	}
-	if (bi / 33 == 1)
-		fs_mode = S3C2410_IISMOD_256FS;
-	else
-		fs_mode = S3C2410_IISMOD_384FS;
-	if (bi % 33 == 0) {
-		clk_source = S3C24XX_CLKSRC_MPLL;
-		div = 1;
-	} else {
-		clk_source = S3C24XX_CLKSRC_PCLK;
-		div = bi % 33;
-	}
-	pr_debug("%s desired rate %lu, %d\n", __func__, rate, bi);
-
-	clk = (fs_mode == S3C2410_IISMOD_384FS ? 384 : 256) * rate;
-	pr_debug("%s will use: %s %s %d sysclk %d err %ld\n", __func__,
-		 fs_mode == S3C2410_IISMOD_384FS ? "384FS" : "256FS",
-		 clk_source == S3C24XX_CLKSRC_MPLL ? "MPLLin" : "PCLK",
-		 div, clk, err);
-
-	if ((err * 100 / rate) > 5) {
-		printk(KERN_ERR "S3C24XX_UDA134X: effective frequency "
-		       "too different from desired (%ld%%)\n",
-		       err * 100 / rate);
-		return -EINVAL;
-	}
-
-	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
-			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
-			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source , clk,
-			SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, fs_mode);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
-			S3C2410_IISMOD_32FS);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
-			S3C24XX_PRESCALE(div, div));
-	if (ret < 0)
-		return ret;
-
-	/* set the codec system clock for DAC and ADC */
-	ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk,
-			SND_SOC_CLOCK_OUT);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static struct snd_soc_ops s3c24xx_uda134x_ops = {
-	.startup = s3c24xx_uda134x_startup,
-	.shutdown = s3c24xx_uda134x_shutdown,
-	.hw_params = s3c24xx_uda134x_hw_params,
-};
-
-static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = {
-	.name = "UDA134X",
-	.stream_name = "UDA134X",
-	.codec_name = "uda134x-hifi",
-	.codec_dai_name = "uda134x-hifi",
-	.cpu_dai_name = "s3c24xx-i2s",
-	.ops = &s3c24xx_uda134x_ops,
-	.platform_name	= "samsung-audio",
-};
-
-static struct snd_soc_card snd_soc_s3c24xx_uda134x = {
-	.name = "S3C24XX_UDA134X",
-	.dai_link = &s3c24xx_uda134x_dai_link,
-	.num_links = 1,
-};
-
-static struct s3c24xx_uda134x_platform_data *s3c24xx_uda134x_l3_pins;
-
-static void setdat(int v)
-{
-	gpio_set_value(s3c24xx_uda134x_l3_pins->l3_data, v > 0);
-}
-
-static void setclk(int v)
-{
-	gpio_set_value(s3c24xx_uda134x_l3_pins->l3_clk, v > 0);
-}
-
-static void setmode(int v)
-{
-	gpio_set_value(s3c24xx_uda134x_l3_pins->l3_mode, v > 0);
-}
-
-/* FIXME - This must be codec platform data but in which board file ?? */
-static struct uda134x_platform_data s3c24xx_uda134x = {
-	.l3 = {
-		.setdat = setdat,
-		.setclk = setclk,
-		.setmode = setmode,
-		.data_hold = 1,
-		.data_setup = 1,
-		.clock_high = 1,
-		.mode_hold = 1,
-		.mode = 1,
-		.mode_setup = 1,
-	},
-};
-
-static int s3c24xx_uda134x_setup_pin(int pin, char *fun)
-{
-	if (gpio_request(pin, "s3c24xx_uda134x") < 0) {
-		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
-		       "l3 %s pin already in use", fun);
-		return -EBUSY;
-	}
-	gpio_direction_output(pin, 0);
-	return 0;
-}
-
-static int s3c24xx_uda134x_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	printk(KERN_INFO "S3C24XX_UDA134X SoC Audio driver\n");
-
-	s3c24xx_uda134x_l3_pins = pdev->dev.platform_data;
-	if (s3c24xx_uda134x_l3_pins == NULL) {
-		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
-		       "unable to find platform data\n");
-		return -ENODEV;
-	}
-	s3c24xx_uda134x.power = s3c24xx_uda134x_l3_pins->power;
-	s3c24xx_uda134x.model = s3c24xx_uda134x_l3_pins->model;
-
-	if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_data,
-				      "data") < 0)
-		return -EBUSY;
-	if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_clk,
-				      "clk") < 0) {
-		gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
-		return -EBUSY;
-	}
-	if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_mode,
-				      "mode") < 0) {
-		gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
-		gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
-		return -EBUSY;
-	}
-
-	s3c24xx_uda134x_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!s3c24xx_uda134x_snd_device) {
-		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
-		       "Unable to register\n");
-		return -ENOMEM;
-	}
-
-	platform_set_drvdata(s3c24xx_uda134x_snd_device,
-			     &snd_soc_s3c24xx_uda134x);
-	ret = platform_device_add(s3c24xx_uda134x_snd_device);
-	if (ret) {
-		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: Unable to add\n");
-		platform_device_put(s3c24xx_uda134x_snd_device);
-	}
-
-	return ret;
-}
-
-static int s3c24xx_uda134x_remove(struct platform_device *pdev)
-{
-	platform_device_unregister(s3c24xx_uda134x_snd_device);
-	gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
-	gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
-	gpio_free(s3c24xx_uda134x_l3_pins->l3_mode);
-	return 0;
-}
-
-static struct platform_driver s3c24xx_uda134x_driver = {
-	.probe  = s3c24xx_uda134x_probe,
-	.remove = s3c24xx_uda134x_remove,
-	.driver = {
-		.name = "s3c24xx_uda134x",
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init s3c24xx_uda134x_init(void)
-{
-	return platform_driver_register(&s3c24xx_uda134x_driver);
-}
-
-static void __exit s3c24xx_uda134x_exit(void)
-{
-	platform_driver_unregister(&s3c24xx_uda134x_driver);
-}
-
-
-module_init(s3c24xx_uda134x_init);
-module_exit(s3c24xx_uda134x_exit);
-
-MODULE_AUTHOR("Zoltan Devai, Christian Pellegrin <chripell@evolware.org>");
-MODULE_DESCRIPTION("S3C24XX_UDA134X ALSA SoC audio driver");
-MODULE_LICENSE("GPL");