Merge tag 'sound-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "In this batch, you can find lots of cleanups through the whole
  subsystem, as our good New Year's resolution.  Lots of LOCs and
  commits are about LINE6 driver that was promoted finally from staging
  tree, and as usual, there've been widely spread ASoC changes.

  Here some highlights:

  ALSA core changes
   - Embedding struct device into ALSA core structures
   - sequencer core cleanups / fixes
   - PCM msbits constraints cleanups / fixes
   - New SNDRV_PCM_TRIGGER_DRAIN command
   - PCM kerneldoc fixes, header cleanups
   - PCM code cleanups using more standard codes
   - Control notification ID fixes

  Driver cleanups
   - Cleanups of PCI PM callbacks
   - Timer helper usages cleanups
   - Simplification (e.g. argument reduction) of many driver codes

  HD-audio
   - Hotkey and LED support on HP laptops with Realtek codecs
   - Dock station support on HP laptops
   - Toshiba Satellite S50D fixup
   - Enhanced wallclock timestamp handling for HD-audio
   - Componentization to simplify the linkage between i915 and hd-audio
     drivers for Intel HDMI/DP

  USB-audio
   - Akai MPC Element support
   - Enhanced timestamp handling

  ASoC
   - Lots of refactoringin ASoC core, moving drivers to more data driven
     initialization and rationalizing a lot of DAPM usage
   - Much improved handling of CDCLK clocks on Samsung I2S controllers
   - Lots of driver specific cleanups and feature improvements
   - CODEC support for TI PCM514x and TLV320AIC3104 devices
   - Board support for Tegra systems with Realtek RT5677
   - New driver for Maxim max98357a
   - More enhancements / fixes for Intel SST driver

  Others
   - Promotion of LINE6 driver from staging along with lots of rewrites
     and cleanups
   - DT support for old non-ASoC atmel driver
   - oxygen cleanups, XIO2001 init, Studio Evolution SE6x support
   - Emu8000 DRAM size detection fix on ISA(!!) AWE64 boards
   - A few more ak411x fixes for ice1724 boards"

* tag 'sound-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (542 commits)
  ALSA: line6: toneport: Use explicit type for firmware version
  ALSA: line6: Use explicit type for serial number
  ALSA: line6: Return EIO if read/write not successful
  ALSA: line6: Return error if device not responding
  ALSA: line6: Add delay before reading status
  ASoC: Intel: Clean data after SST fw fetch
  ALSA: hda - Add docking station support for another HP machine
  ALSA: control: fix failure to return new numerical ID in 'replace' event data
  ALSA: usb: update trigger timestamp on first non-zero URB submitted
  ALSA: hda: read trigger_timestamp immediately after starting DMA
  ALSA: pcm: allow for trigger_tstamp snapshot in .trigger
  ALSA: pcm: don't override timestamp unconditionally
  ALSA: off by one bug in snd_riptide_joystick_probe()
  ASoC: rt5670: Set use_single_rw flag for regmap
  ASoC: rt286: Add rt288 codec support
  ASoC: max98357a: Fix build in !CONFIG_OF case
  ASoC: Intel: fix platform_no_drv_owner.cocci warnings
  ARM: dts: Switch Odroid X2/U2 to simple-audio-card
  ARM: dts: Exynos4 and Odroid X2/U3 sound device nodes update
  ALSA: control: fix failure to return numerical ID in 'add' event
  ...

1 files changed, 181 insertions, 0 deletions

diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h
new file mode 100644
index 000000000000..5d20294d64f4
--- /dev/null
+++ b/sound/usb/line6/driver.h
@@ -0,0 +1,181 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#ifndef DRIVER_H
+#define DRIVER_H
+
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <sound/core.h>
+
+#include "midi.h"
+
+#define USB_INTERVALS_PER_SECOND 1000
+
+/* Fallback USB interval and max packet size values */
+#define LINE6_FALLBACK_INTERVAL 10
+#define LINE6_FALLBACK_MAXPACKETSIZE 16
+
+#define LINE6_TIMEOUT 1
+#define LINE6_BUFSIZE_LISTEN 32
+#define LINE6_MESSAGE_MAXLEN 256
+
+/*
+	Line 6 MIDI control commands
+*/
+#define LINE6_PARAM_CHANGE   0xb0
+#define LINE6_PROGRAM_CHANGE 0xc0
+#define LINE6_SYSEX_BEGIN    0xf0
+#define LINE6_SYSEX_END      0xf7
+#define LINE6_RESET          0xff
+
+/*
+	MIDI channel for messages initiated by the host
+	(and eventually echoed back by the device)
+*/
+#define LINE6_CHANNEL_HOST   0x00
+
+/*
+	MIDI channel for messages initiated by the device
+*/
+#define LINE6_CHANNEL_DEVICE 0x02
+
+#define LINE6_CHANNEL_UNKNOWN 5	/* don't know yet what this is good for */
+
+#define LINE6_CHANNEL_MASK 0x0f
+
+#define CHECK_STARTUP_PROGRESS(x, n)	\
+do {					\
+	if ((x) >= (n))			\
+		return;			\
+	x = (n);			\
+} while (0)
+
+extern const unsigned char line6_midi_id[3];
+
+static const int SYSEX_DATA_OFS = sizeof(line6_midi_id) + 3;
+static const int SYSEX_EXTRA_SIZE = sizeof(line6_midi_id) + 4;
+
+/*
+	 Common properties of Line 6 devices.
+*/
+struct line6_properties {
+	/* Card id string (maximum 16 characters).
+	 * This can be used to address the device in ALSA programs as
+	 * "default:CARD=<id>"
+	 */
+	const char *id;
+
+	/* Card short name (maximum 32 characters) */
+	const char *name;
+
+	/* Bit vector defining this device's capabilities in line6usb driver */
+	int capabilities;
+
+	int altsetting;
+
+	unsigned ep_ctrl_r;
+	unsigned ep_ctrl_w;
+	unsigned ep_audio_r;
+	unsigned ep_audio_w;
+};
+
+/* Capability bits */
+enum {
+	/* device supports settings parameter via USB */
+	LINE6_CAP_CONTROL =	1 << 0,
+	/* device supports PCM input/output via USB */
+	LINE6_CAP_PCM =		1 << 1,
+	/* device support hardware monitoring */
+	LINE6_CAP_HWMON =	1 << 2,
+};
+
+/*
+	 Common data shared by all Line 6 devices.
+	 Corresponds to a pair of USB endpoints.
+*/
+struct usb_line6 {
+	/* USB device */
+	struct usb_device *usbdev;
+
+	/* Properties */
+	const struct line6_properties *properties;
+
+	/* Interval (ms) */
+	int interval;
+
+	/* Maximum size of USB packet */
+	int max_packet_size;
+
+	/* Device representing the USB interface */
+	struct device *ifcdev;
+
+	/* Line 6 sound card data structure.
+	 * Each device has at least MIDI or PCM.
+	 */
+	struct snd_card *card;
+
+	/* Line 6 PCM device data structure */
+	struct snd_line6_pcm *line6pcm;
+
+	/* Line 6 MIDI device data structure */
+	struct snd_line6_midi *line6midi;
+
+	/* URB for listening to PODxt Pro control endpoint */
+	struct urb *urb_listen;
+
+	/* Buffer for listening to PODxt Pro control endpoint */
+	unsigned char *buffer_listen;
+
+	/* Buffer for message to be processed */
+	unsigned char *buffer_message;
+
+	/* Length of message to be processed */
+	int message_length;
+
+	void (*process_message)(struct usb_line6 *);
+	void (*disconnect)(struct usb_line6 *line6);
+};
+
+extern char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1,
+				      int code2, int size);
+extern int line6_read_data(struct usb_line6 *line6, int address, void *data,
+			   size_t datalen);
+extern int line6_read_serial_number(struct usb_line6 *line6,
+				    u32 *serial_number);
+extern int line6_send_raw_message_async(struct usb_line6 *line6,
+					const char *buffer, int size);
+extern int line6_send_sysex_message(struct usb_line6 *line6,
+				    const char *buffer, int size);
+extern ssize_t line6_set_raw(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count);
+extern void line6_start_timer(struct timer_list *timer, unsigned long msecs,
+			      void (*function)(unsigned long),
+			      unsigned long data);
+extern int line6_version_request_async(struct usb_line6 *line6);
+extern int line6_write_data(struct usb_line6 *line6, int address, void *data,
+			    size_t datalen);
+
+int line6_probe(struct usb_interface *interface,
+		const struct usb_device_id *id,
+		const char *driver_name,
+		const struct line6_properties *properties,
+		int (*private_init)(struct usb_line6 *, const struct usb_device_id *id),
+		size_t data_size);
+
+void line6_disconnect(struct usb_interface *interface);
+
+#ifdef CONFIG_PM
+int line6_suspend(struct usb_interface *interface, pm_message_t message);
+int line6_resume(struct usb_interface *interface);
+#endif
+
+#endif