ALSA: move line6 usb driver into sound/usb

Promote line6 driver from staging to sound/usb/line6 directory, and
maintain through sound subsystem tree.

This commit just moves the code and adapts Makefile / Kconfig.
The further renames and misc cleanups will follow.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 453 insertions, 0 deletions

diff --git a/sound/usb/line6/pod.c b/sound/usb/line6/pod.c
new file mode 100644
index 000000000000..85a43631996e
--- /dev/null
+++ b/sound/usb/line6/pod.c
@@ -0,0 +1,453 @@
+/*
+ * Line6 Linux USB driver - 0.9.1beta
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <sound/control.h>
+
+#include "audio.h"
+#include "capture.h"
+#include "driver.h"
+#include "playback.h"
+#include "pod.h"
+
+#define POD_SYSEX_CODE 3
+#define POD_BYTES_PER_FRAME 6	/* 24bit audio (stereo) */
+
+/* *INDENT-OFF* */
+
+enum {
+	POD_SYSEX_SAVE      = 0x24,
+	POD_SYSEX_SYSTEM    = 0x56,
+	POD_SYSEX_SYSTEMREQ = 0x57,
+	/* POD_SYSEX_UPDATE    = 0x6c, */  /* software update! */
+	POD_SYSEX_STORE     = 0x71,
+	POD_SYSEX_FINISH    = 0x72,
+	POD_SYSEX_DUMPMEM   = 0x73,
+	POD_SYSEX_DUMP      = 0x74,
+	POD_SYSEX_DUMPREQ   = 0x75
+
+	/* dumps entire internal memory of PODxt Pro */
+	/* POD_SYSEX_DUMPMEM2  = 0x76 */
+};
+
+enum {
+	POD_MONITOR_LEVEL  = 0x04,
+	POD_SYSTEM_INVALID = 0x10000
+};
+
+/* *INDENT-ON* */
+
+enum {
+	POD_DUMP_MEMORY = 2
+};
+
+enum {
+	POD_BUSY_READ,
+	POD_BUSY_WRITE,
+	POD_CHANNEL_DIRTY,
+	POD_SAVE_PRESSED,
+	POD_BUSY_MIDISEND
+};
+
+static struct snd_ratden pod_ratden = {
+	.num_min = 78125,
+	.num_max = 78125,
+	.num_step = 1,
+	.den = 2
+};
+
+static struct line6_pcm_properties pod_pcm_properties = {
+	.snd_line6_playback_hw = {
+				  .info = (SNDRV_PCM_INFO_MMAP |
+					   SNDRV_PCM_INFO_INTERLEAVED |
+					   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					   SNDRV_PCM_INFO_MMAP_VALID |
+					   SNDRV_PCM_INFO_PAUSE |
+#ifdef CONFIG_PM
+					   SNDRV_PCM_INFO_RESUME |
+#endif
+					   SNDRV_PCM_INFO_SYNC_START),
+				  .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+				  .rates = SNDRV_PCM_RATE_KNOT,
+				  .rate_min = 39062,
+				  .rate_max = 39063,
+				  .channels_min = 2,
+				  .channels_max = 2,
+				  .buffer_bytes_max = 60000,
+				  .period_bytes_min = 64,
+				  .period_bytes_max = 8192,
+				  .periods_min = 1,
+				  .periods_max = 1024},
+	.snd_line6_capture_hw = {
+				 .info = (SNDRV_PCM_INFO_MMAP |
+					  SNDRV_PCM_INFO_INTERLEAVED |
+					  SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					  SNDRV_PCM_INFO_MMAP_VALID |
+#ifdef CONFIG_PM
+					  SNDRV_PCM_INFO_RESUME |
+#endif
+					  SNDRV_PCM_INFO_SYNC_START),
+				 .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+				 .rates = SNDRV_PCM_RATE_KNOT,
+				 .rate_min = 39062,
+				 .rate_max = 39063,
+				 .channels_min = 2,
+				 .channels_max = 2,
+				 .buffer_bytes_max = 60000,
+				 .period_bytes_min = 64,
+				 .period_bytes_max = 8192,
+				 .periods_min = 1,
+				 .periods_max = 1024},
+	.snd_line6_rates = {
+			    .nrats = 1,
+			    .rats = &pod_ratden},
+	.bytes_per_frame = POD_BYTES_PER_FRAME
+};
+
+static const char pod_version_header[] = {
+	0xf2, 0x7e, 0x7f, 0x06, 0x02
+};
+
+/* forward declarations: */
+static void pod_startup2(unsigned long data);
+static void pod_startup3(struct usb_line6_pod *pod);
+
+static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
+				    int size)
+{
+	return line6_alloc_sysex_buffer(&pod->line6, POD_SYSEX_CODE, code,
+					size);
+}
+
+/*
+	Process a completely received message.
+*/
+static void line6_pod_process_message(struct usb_line6 *line6)
+{
+	struct usb_line6_pod *pod = (struct usb_line6_pod *) line6;
+	const unsigned char *buf = pod->line6.buffer_message;
+
+	if (memcmp(buf, pod_version_header, sizeof(pod_version_header)) == 0) {
+		pod->firmware_version = buf[13] * 100 + buf[14] * 10 + buf[15];
+		pod->device_id = ((int)buf[8] << 16) | ((int)buf[9] << 8) |
+				 (int) buf[10];
+		pod_startup3(pod);
+		return;
+	}
+
+	/* Only look for sysex messages from this device */
+	if (buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_DEVICE) &&
+	    buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_UNKNOWN)) {
+		return;
+	}
+	if (memcmp(buf + 1, line6_midi_id, sizeof(line6_midi_id)) != 0)
+		return;
+
+	if (buf[5] == POD_SYSEX_SYSTEM && buf[6] == POD_MONITOR_LEVEL) {
+		short value = ((int)buf[7] << 12) | ((int)buf[8] << 8) |
+			      ((int)buf[9] << 4) | (int)buf[10];
+		pod->monitor_level = value;
+	}
+}
+
+/*
+	Send system parameter (from integer).
+*/
+static int pod_set_system_param_int(struct usb_line6_pod *pod, int value,
+				    int code)
+{
+	char *sysex;
+	static const int size = 5;
+
+	sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_SYSTEM, size);
+	if (!sysex)
+		return -ENOMEM;
+	sysex[SYSEX_DATA_OFS] = code;
+	sysex[SYSEX_DATA_OFS + 1] = (value >> 12) & 0x0f;
+	sysex[SYSEX_DATA_OFS + 2] = (value >> 8) & 0x0f;
+	sysex[SYSEX_DATA_OFS + 3] = (value >> 4) & 0x0f;
+	sysex[SYSEX_DATA_OFS + 4] = (value) & 0x0f;
+	line6_send_sysex_message(&pod->line6, sysex, size);
+	kfree(sysex);
+	return 0;
+}
+
+/*
+	"read" request on "serial_number" special file.
+*/
+static ssize_t serial_number_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *interface = to_usb_interface(dev);
+	struct usb_line6_pod *pod = usb_get_intfdata(interface);
+
+	return sprintf(buf, "%d\n", pod->serial_number);
+}
+
+/*
+	"read" request on "firmware_version" special file.
+*/
+static ssize_t firmware_version_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *interface = to_usb_interface(dev);
+	struct usb_line6_pod *pod = usb_get_intfdata(interface);
+
+	return sprintf(buf, "%d.%02d\n", pod->firmware_version / 100,
+		       pod->firmware_version % 100);
+}
+
+/*
+	"read" request on "device_id" special file.
+*/
+static ssize_t device_id_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *interface = to_usb_interface(dev);
+	struct usb_line6_pod *pod = usb_get_intfdata(interface);
+
+	return sprintf(buf, "%d\n", pod->device_id);
+}
+
+/*
+	POD startup procedure.
+	This is a sequence of functions with special requirements (e.g., must
+	not run immediately after initialization, must not run in interrupt
+	context). After the last one has finished, the device is ready to use.
+*/
+
+static void pod_startup1(struct usb_line6_pod *pod)
+{
+	CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_INIT);
+
+	/* delay startup procedure: */
+	line6_start_timer(&pod->startup_timer, POD_STARTUP_DELAY, pod_startup2,
+			  (unsigned long)pod);
+}
+
+static void pod_startup2(unsigned long data)
+{
+	struct usb_line6_pod *pod = (struct usb_line6_pod *)data;
+	struct usb_line6 *line6 = &pod->line6;
+
+	CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_VERSIONREQ);
+
+	/* request firmware version: */
+	line6_version_request_async(line6);
+}
+
+static void pod_startup3(struct usb_line6_pod *pod)
+{
+	CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_WORKQUEUE);
+
+	/* schedule work for global work queue: */
+	schedule_work(&pod->startup_work);
+}
+
+static void pod_startup4(struct work_struct *work)
+{
+	struct usb_line6_pod *pod =
+	    container_of(work, struct usb_line6_pod, startup_work);
+	struct usb_line6 *line6 = &pod->line6;
+
+	CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_SETUP);
+
+	/* serial number: */
+	line6_read_serial_number(&pod->line6, &pod->serial_number);
+
+	/* ALSA audio interface: */
+	line6_register_audio(line6);
+}
+
+/* POD special files: */
+static DEVICE_ATTR_RO(device_id);
+static DEVICE_ATTR_RO(firmware_version);
+static DEVICE_ATTR_RO(serial_number);
+
+/* control info callback */
+static int snd_pod_control_monitor_info(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 65535;
+	return 0;
+}
+
+/* control get callback */
+static int snd_pod_control_monitor_get(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6;
+
+	ucontrol->value.integer.value[0] = pod->monitor_level;
+	return 0;
+}
+
+/* control put callback */
+static int snd_pod_control_monitor_put(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6;
+
+	if (ucontrol->value.integer.value[0] == pod->monitor_level)
+		return 0;
+
+	pod->monitor_level = ucontrol->value.integer.value[0];
+	pod_set_system_param_int(pod, ucontrol->value.integer.value[0],
+				 POD_MONITOR_LEVEL);
+	return 1;
+}
+
+/* control definition */
+static struct snd_kcontrol_new pod_control_monitor = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Monitor Playback Volume",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = snd_pod_control_monitor_info,
+	.get = snd_pod_control_monitor_get,
+	.put = snd_pod_control_monitor_put
+};
+
+/*
+	POD destructor.
+*/
+static void pod_destruct(struct usb_interface *interface)
+{
+	struct usb_line6_pod *pod = usb_get_intfdata(interface);
+
+	if (pod == NULL)
+		return;
+	line6_cleanup_audio(&pod->line6);
+
+	del_timer(&pod->startup_timer);
+	cancel_work_sync(&pod->startup_work);
+}
+
+/*
+	POD device disconnected.
+*/
+static void line6_pod_disconnect(struct usb_interface *interface)
+{
+	struct usb_line6_pod *pod;
+
+	if (interface == NULL)
+		return;
+	pod = usb_get_intfdata(interface);
+
+	if (pod != NULL) {
+		struct snd_line6_pcm *line6pcm = pod->line6.line6pcm;
+		struct device *dev = &interface->dev;
+
+		if (line6pcm != NULL)
+			line6_pcm_disconnect(line6pcm);
+
+		if (dev != NULL) {
+			/* remove sysfs entries: */
+			device_remove_file(dev, &dev_attr_device_id);
+			device_remove_file(dev, &dev_attr_firmware_version);
+			device_remove_file(dev, &dev_attr_serial_number);
+		}
+	}
+
+	pod_destruct(interface);
+}
+
+/*
+	Create sysfs entries.
+*/
+static int pod_create_files2(struct device *dev)
+{
+	int err;
+
+	CHECK_RETURN(device_create_file(dev, &dev_attr_device_id));
+	CHECK_RETURN(device_create_file(dev, &dev_attr_firmware_version));
+	CHECK_RETURN(device_create_file(dev, &dev_attr_serial_number));
+	return 0;
+}
+
+/*
+	 Try to init POD device.
+*/
+static int pod_try_init(struct usb_interface *interface,
+			struct usb_line6 *line6)
+{
+	int err;
+	struct usb_line6_pod *pod = (struct usb_line6_pod *) line6;
+
+	line6->process_message = line6_pod_process_message;
+	line6->disconnect = line6_pod_disconnect;
+
+	init_timer(&pod->startup_timer);
+	INIT_WORK(&pod->startup_work, pod_startup4);
+
+	if ((interface == NULL) || (pod == NULL))
+		return -ENODEV;
+
+	/* create sysfs entries: */
+	err = pod_create_files2(&interface->dev);
+	if (err < 0)
+		return err;
+
+	/* initialize audio system: */
+	err = line6_init_audio(line6);
+	if (err < 0)
+		return err;
+
+	/* initialize MIDI subsystem: */
+	err = line6_init_midi(line6);
+	if (err < 0)
+		return err;
+
+	/* initialize PCM subsystem: */
+	err = line6_init_pcm(line6, &pod_pcm_properties);
+	if (err < 0)
+		return err;
+
+	/* register monitor control: */
+	err = snd_ctl_add(line6->card,
+			  snd_ctl_new1(&pod_control_monitor, line6->line6pcm));
+	if (err < 0)
+		return err;
+
+	/*
+	   When the sound card is registered at this point, the PODxt Live
+	   displays "Invalid Code Error 07", so we do it later in the event
+	   handler.
+	 */
+
+	if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) {
+		pod->monitor_level = POD_SYSTEM_INVALID;
+
+		/* initiate startup procedure: */
+		pod_startup1(pod);
+	}
+
+	return 0;
+}
+
+/*
+	 Init POD device (and clean up in case of failure).
+*/
+int line6_pod_init(struct usb_interface *interface, struct usb_line6 *line6)
+{
+	int err = pod_try_init(interface, line6);
+
+	if (err < 0)
+		pod_destruct(interface);
+
+	return err;
+}