summaryrefslogtreecommitdiffstats
path: root/tools/power
diff options
context:
space:
mode:
authorTodd Brandt <todd.e.brandt@linux.intel.com>2018-10-09 00:56:31 +0200
committerRafael J. Wysocki <rafael.j.wysocki@intel.com>2018-10-09 09:27:33 +0200
commit5484f0334439701900121a107709c461215cadb6 (patch)
tree8fea56173f8252d0eb801771c567ace532a776b9 /tools/power
parentLinux 4.19-rc7 (diff)
downloadlinux-5484f0334439701900121a107709c461215cadb6.tar.xz
linux-5484f0334439701900121a107709c461215cadb6.zip
PM / tools: sleepgraph: first batch of v5.2 changes
general: - add battery charge data before and after test - remove special s0i3 handling - remove melding of dmesg & ftrace data in old kernels, use one only - updates to various kprobes in trace (ksys_sync, etc) - enable pm_debug_messages during the test - instrument more subsystems with dev functions (phy0) error handling: - return codes for tool show the status of the test run - 0: success, 1: general error (no timeline), 2: fail (suspend aborted) - monitor output of /sys/power/state, mark as failure if exception occurs - add signal handler when using -result to catch tool exceptions display control - add -x commands for testing xset with mode settings and status - allow display setting to on, off, suspend, standby - add display mode change info to the log, along with a warning on fail s2idle (freeze) - remove fixed 10-phase dependency, allow any phase order & any count - multiple phase occurences show as phase_nameN e.g. suspend_noirq3 - if multiple freezes occur, print multiple time values in header summary: - add new columns to summary output: issues, worst suspend/resume devices - worst device: includes summation of all phases of suspend or resume - issues: includes WARNING/ERROR/BUG from dmesg log, and other issues - s2idle: multiple freezes show as FREEZExN in the issues column Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'tools/power')
-rw-r--r--tools/power/pm-graph/Makefile4
-rw-r--r--tools/power/pm-graph/sleepgraph.813
-rwxr-xr-xtools/power/pm-graph/sleepgraph.py1378
3 files changed, 760 insertions, 635 deletions
diff --git a/tools/power/pm-graph/Makefile b/tools/power/pm-graph/Makefile
index c1899cd72c80..845541544570 100644
--- a/tools/power/pm-graph/Makefile
+++ b/tools/power/pm-graph/Makefile
@@ -23,8 +23,8 @@ install : uninstall
install -m 644 config/suspend-x2-proc.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config
install -d $(DESTDIR)$(PREFIX)/bin
- ln -s $(DESTDIR)$(PREFIX)/lib/pm-graph/bootgraph.py $(DESTDIR)$(PREFIX)/bin/bootgraph
- ln -s $(DESTDIR)$(PREFIX)/lib/pm-graph/sleepgraph.py $(DESTDIR)$(PREFIX)/bin/sleepgraph
+ ln -s ../lib/pm-graph/bootgraph.py $(DESTDIR)$(PREFIX)/bin/bootgraph
+ ln -s ../lib/pm-graph/sleepgraph.py $(DESTDIR)$(PREFIX)/bin/sleepgraph
install -d $(DESTDIR)$(PREFIX)/share/man/man8
install bootgraph.8 $(DESTDIR)$(PREFIX)/share/man/man8
diff --git a/tools/power/pm-graph/sleepgraph.8 b/tools/power/pm-graph/sleepgraph.8
index 070be2cf7f74..24a2e7d0ae63 100644
--- a/tools/power/pm-graph/sleepgraph.8
+++ b/tools/power/pm-graph/sleepgraph.8
@@ -65,9 +65,9 @@ During test, enable/disable runtime suspend for all devices. The test is delayed
by 5 seconds to allow runtime suspend changes to occur. The settings are restored
after the test is complete.
.TP
-\fB-display \fIon/off\fR
-Turn the display on or off for the test using the xset command. This helps
-maintain the consistecy of test data for better comparison.
+\fB-display \fIon/off/standby/suspend\fR
+Switch the display to the requested mode for the test using the xset command.
+This helps maintain the consistency of test data for better comparison.
.TP
\fB-skiphtml\fR
Run the test and capture the trace logs, but skip the timeline generation.
@@ -183,6 +183,13 @@ Print out the contents of the ACPI Firmware Performance Data Table.
\fB-battery\fR
Print out battery status and current charge.
.TP
+\fB-xon/-xoff/-xstandby/-xsuspend\fR
+Test xset by attempting to switch the display to the given mode. This
+is the same command which will be issued by \fB-display \fImode\fR.
+.TP
+\fB-xstat\fR
+Get the current DPMS display mode.
+.TP
\fB-sysinfo\fR
Print out system info extracted from BIOS. Reads /dev/mem directly instead of going through dmidecode.
.TP
diff --git a/tools/power/pm-graph/sleepgraph.py b/tools/power/pm-graph/sleepgraph.py
index 0c760478f7d7..343e8000d9ca 100755
--- a/tools/power/pm-graph/sleepgraph.py
+++ b/tools/power/pm-graph/sleepgraph.py
@@ -54,6 +54,7 @@ import os
import string
import re
import platform
+import signal
from datetime import datetime
import struct
import ConfigParser
@@ -72,7 +73,7 @@ class SystemValues:
version = '5.1'
ansi = False
rs = 0
- display = 0
+ display = ''
gzip = False
sync = False
verbose = False
@@ -99,6 +100,7 @@ class SystemValues:
tpath = '/sys/kernel/debug/tracing/'
fpdtpath = '/sys/firmware/acpi/tables/FPDT'
epath = '/sys/kernel/debug/tracing/events/power/'
+ pmdpath = '/sys/power/pm_debug_messages'
traceevents = [
'suspend_resume',
'device_pm_callback_end',
@@ -141,12 +143,10 @@ class SystemValues:
devprops = dict()
predelay = 0
postdelay = 0
- procexecfmt = 'ps - (?P<ps>.*)$'
- devpropfmt = '# Device Properties: .*'
- tracertypefmt = '# tracer: (?P<t>.*)'
- firmwarefmt = '# fwsuspend (?P<s>[0-9]*) fwresume (?P<r>[0-9]*)$'
+ pmdebug = ''
tracefuncs = {
'sys_sync': {},
+ 'ksys_sync': {},
'__pm_notifier_call_chain': {},
'pm_prepare_console': {},
'pm_notifier_call_chain': {},
@@ -187,7 +187,6 @@ class SystemValues:
dev_tracefuncs = {
# general wait/delay/sleep
'msleep': { 'args_x86_64': {'time':'%di:s32'}, 'ub': 1 },
- 'schedule_timeout_uninterruptible': { 'args_x86_64': {'timeout':'%di:s32'}, 'ub': 1 },
'schedule_timeout': { 'args_x86_64': {'timeout':'%di:s32'}, 'ub': 1 },
'udelay': { 'func':'__const_udelay', 'args_x86_64': {'loops':'%di:s32'}, 'ub': 1 },
'usleep_range': { 'args_x86_64': {'min':'%di:s32', 'max':'%si:s32'}, 'ub': 1 },
@@ -199,6 +198,9 @@ class SystemValues:
# filesystem
'ext4_sync_fs': {},
# 80211
+ 'ath10k_bmi_read_memory': { 'args_x86_64': {'length':'%cx:s32'} },
+ 'ath10k_bmi_write_memory': { 'args_x86_64': {'length':'%cx:s32'} },
+ 'ath10k_bmi_fast_download': { 'args_x86_64': {'length':'%cx:s32'} },
'iwlagn_mac_start': {},
'iwlagn_alloc_bcast_station': {},
'iwl_trans_pcie_start_hw': {},
@@ -241,6 +243,7 @@ class SystemValues:
timeformat = '%.3f'
cmdline = '%s %s' % \
(os.path.basename(sys.argv[0]), ' '.join(sys.argv[1:]))
+ sudouser = ''
def __init__(self):
self.archargs = 'args_'+platform.machine()
self.hostname = platform.node()
@@ -256,10 +259,32 @@ class SystemValues:
if (hasattr(sys.stdout, 'isatty') and sys.stdout.isatty()):
self.ansi = True
self.testdir = datetime.now().strftime('suspend-%y%m%d-%H%M%S')
+ if os.getuid() == 0 and 'SUDO_USER' in os.environ and \
+ os.environ['SUDO_USER']:
+ self.sudouser = os.environ['SUDO_USER']
def vprint(self, msg):
self.logmsg += msg+'\n'
- if(self.verbose):
+ if self.verbose or msg.startswith('WARNING:'):
print(msg)
+ def signalHandler(self, signum, frame):
+ if not self.result:
+ return
+ signame = self.signames[signum] if signum in self.signames else 'UNKNOWN'
+ msg = 'Signal %s caused a tool exit, line %d' % (signame, frame.f_lineno)
+ sysvals.outputResult({'error':msg})
+ sys.exit(3)
+ def signalHandlerInit(self):
+ capture = ['BUS', 'SYS', 'XCPU', 'XFSZ', 'PWR', 'HUP', 'INT', 'QUIT',
+ 'ILL', 'ABRT', 'FPE', 'SEGV', 'TERM', 'TSTP']
+ self.signames = dict()
+ for i in capture:
+ s = 'SIG'+i
+ try:
+ signum = getattr(signal, s)
+ signal.signal(signum, self.signalHandler)
+ except:
+ continue
+ self.signames[signum] = s
def rootCheck(self, fatal=True):
if(os.access(self.powerfile, os.W_OK)):
return True
@@ -267,7 +292,7 @@ class SystemValues:
msg = 'This command requires sysfs mount and root access'
print('ERROR: %s\n') % msg
self.outputResult({'error':msg})
- sys.exit()
+ sys.exit(1)
return False
def rootUser(self, fatal=False):
if 'USER' in os.environ and os.environ['USER'] == 'root':
@@ -276,7 +301,7 @@ class SystemValues:
msg = 'This command must be run as root'
print('ERROR: %s\n') % msg
self.outputResult({'error':msg})
- sys.exit()
+ sys.exit(1)
return False
def getExec(self, cmd):
dirlist = ['/sbin', '/bin', '/usr/sbin', '/usr/bin',
@@ -406,8 +431,8 @@ class SystemValues:
ktime = m.group('ktime')
fp.close()
self.dmesgstart = float(ktime)
- def getdmesg(self, fwdata=[]):
- op = self.writeDatafileHeader(sysvals.dmesgfile, fwdata)
+ def getdmesg(self, testdata):
+ op = self.writeDatafileHeader(sysvals.dmesgfile, testdata)
# store all new dmesg lines since initdmesg was called
fp = Popen('dmesg', stdout=PIPE).stdout
for line in fp:
@@ -619,6 +644,8 @@ class SystemValues:
self.fsetVal('0', 'events/kprobes/enable')
self.fsetVal('', 'kprobe_events')
self.fsetVal('1024', 'buffer_size_kb')
+ if self.pmdebug:
+ self.setVal(self.pmdebug, self.pmdpath)
def setupAllKprobes(self):
for name in self.tracefuncs:
self.defaultKprobe(name, self.tracefuncs[name])
@@ -641,6 +668,11 @@ class SystemValues:
# turn trace off
self.fsetVal('0', 'tracing_on')
self.cleanupFtrace()
+ # pm debug messages
+ pv = self.getVal(self.pmdpath)
+ if pv != '1':
+ self.setVal('1', self.pmdpath)
+ self.pmdebug = pv
# set the trace clock to global
self.fsetVal('global', 'trace_clock')
self.fsetVal('nop', 'current_tracer')
@@ -728,19 +760,24 @@ class SystemValues:
if not self.ansi:
return str
return '\x1B[%d;40m%s\x1B[m' % (color, str)
- def writeDatafileHeader(self, filename, fwdata=[]):
+ def writeDatafileHeader(self, filename, testdata):
fp = self.openlog(filename, 'w')
fp.write('%s\n%s\n# command | %s\n' % (self.teststamp, self.sysstamp, self.cmdline))
- if(self.suspendmode == 'mem' or self.suspendmode == 'command'):
- for fw in fwdata:
+ for test in testdata:
+ if 'fw' in test:
+ fw = test['fw']
if(fw):
fp.write('# fwsuspend %u fwresume %u\n' % (fw[0], fw[1]))
+ if 'bat' in test:
+ (a1, c1), (a2, c2) = test['bat']
+ fp.write('# battery %s %d %s %d\n' % (a1, c1, a2, c2))
+ if test['error'] or len(testdata) > 1:
+ fp.write('# enter_sleep_error %s\n' % test['error'])
return fp
- def sudouser(self, dir):
- if os.path.exists(dir) and os.getuid() == 0 and \
- 'SUDO_USER' in os.environ:
+ def sudoUserchown(self, dir):
+ if os.path.exists(dir) and self.sudouser:
cmd = 'chown -R {0}:{0} {1} > /dev/null 2>&1'
- call(cmd.format(os.environ['SUDO_USER'], dir), shell=True)
+ call(cmd.format(self.sudouser, dir), shell=True)
def outputResult(self, testdata, num=0):
if not self.result:
return
@@ -762,7 +799,7 @@ class SystemValues:
if 'bugurl' in testdata:
fp.write('url%s: %s\n' % (n, testdata['bugurl']))
fp.close()
- self.sudouser(self.result)
+ self.sudoUserchown(self.result)
def configFile(self, file):
dir = os.path.dirname(os.path.realpath(__file__))
if os.path.exists(file):
@@ -800,11 +837,12 @@ suspendmodename = {
# Simple class which holds property values collected
# for all the devices used in the timeline.
class DevProps:
- syspath = ''
- altname = ''
- async = True
- xtraclass = ''
- xtrainfo = ''
+ def __init__(self):
+ self.syspath = ''
+ self.altname = ''
+ self.async = True
+ self.xtraclass = ''
+ self.xtrainfo = ''
def out(self, dev):
return '%s,%s,%d;' % (dev, self.altname, self.async)
def debug(self, dev):
@@ -831,9 +869,6 @@ class DevProps:
# A container used to create a device hierachy, with a single root node
# and a tree of child nodes. Used by Data.deviceTopology()
class DeviceNode:
- name = ''
- children = 0
- depth = 0
def __init__(self, nodename, nodedepth):
self.name = nodename
self.children = []
@@ -861,71 +896,78 @@ class DeviceNode:
# }
#
class Data:
- dmesg = {} # root data structure
- phases = [] # ordered list of phases
- start = 0.0 # test start
- end = 0.0 # test end
- tSuspended = 0.0 # low-level suspend start
- tResumed = 0.0 # low-level resume start
- tKernSus = 0.0 # kernel level suspend start
- tKernRes = 0.0 # kernel level resume end
- tLow = 0.0 # time spent in low-level suspend (standby/freeze)
- fwValid = False # is firmware data available
- fwSuspend = 0 # time spent in firmware suspend
- fwResume = 0 # time spent in firmware resume
- dmesgtext = [] # dmesg text file in memory
- pstl = 0 # process timeline
- testnumber = 0
- idstr = ''
- html_device_id = 0
- stamp = 0
- outfile = ''
- devpids = []
- kerror = False
+ phasedef = {
+ 'suspend_prepare': {'order': 0, 'color': '#CCFFCC'},
+ 'suspend': {'order': 1, 'color': '#88FF88'},
+ 'suspend_late': {'order': 2, 'color': '#00AA00'},
+ 'suspend_noirq': {'order': 3, 'color': '#008888'},
+ 'suspend_machine': {'order': 4, 'color': '#0000FF'},
+ 'resume_machine': {'order': 5, 'color': '#FF0000'},
+ 'resume_noirq': {'order': 6, 'color': '#FF9900'},
+ 'resume_early': {'order': 7, 'color': '#FFCC00'},
+ 'resume': {'order': 8, 'color': '#FFFF88'},
+ 'resume_complete': {'order': 9, 'color': '#FFFFCC'},
+ }
+ errlist = {
+ 'HWERROR' : '.*\[ *Hardware Error *\].*',
+ 'FWBUG' : '.*\[ *Firmware Bug *\].*',
+ 'BUG' : '.*BUG.*',
+ 'ERROR' : '.*ERROR.*',
+ 'WARNING' : '.*WARNING.*',
+ 'IRQ' : '.*genirq: .*',
+ 'TASKFAIL': '.*Freezing of tasks failed.*',
+ }
def __init__(self, num):
idchar = 'abcdefghij'
- self.pstl = dict()
+ self.start = 0.0 # test start
+ self.end = 0.0 # test end
+ self.tSuspended = 0.0 # low-level suspend start
+ self.tResumed = 0.0 # low-level resume start
+ self.tKernSus = 0.0 # kernel level suspend start
+ self.tKernRes = 0.0 # kernel level resume end
+ self.fwValid = False # is firmware data available
+ self.fwSuspend = 0 # time spent in firmware suspend
+ self.fwResume = 0 # time spent in firmware resume
+ self.html_device_id = 0
+ self.stamp = 0
+ self.outfile = ''
+ self.kerror = False
+ self.battery = 0
+ self.enterfail = ''
+ self.currphase = ''
+ self.pstl = dict() # process timeline
self.testnumber = num
self.idstr = idchar[num]
- self.dmesgtext = []
- self.phases = []
- self.dmesg = { # fixed list of 10 phases
- 'suspend_prepare': {'list': dict(), 'start': -1.0, 'end': -1.0,
- 'row': 0, 'color': '#CCFFCC', 'order': 0},
- 'suspend': {'list': dict(), 'start': -1.0, 'end': -1.0,
- 'row': 0, 'color': '#88FF88', 'order': 1},
- 'suspend_late': {'list': dict(), 'start': -1.0, 'end': -1.0,
- 'row': 0, 'color': '#00AA00', 'order': 2},
- 'suspend_noirq': {'list': dict(), 'start': -1.0, 'end': -1.0,
- 'row': 0, 'color': '#008888', 'order': 3},
- 'suspend_machine': {'list': dict(), 'start': -1.0, 'end': -1.0,
- 'row': 0, 'color': '#0000FF', 'order': 4},
- 'resume_machine': {'list': dict(), 'start': -1.0, 'end': -1.0,
- 'row': 0, 'color': '#FF0000', 'order': 5},
- 'resume_noirq': {'list': dict(), 'start': -1.0, 'end': -1.0,
- 'row': 0, 'color': '#FF9900', 'order': 6},
- 'resume_early': {'list': dict(), 'start': -1.0, 'end': -1.0,
- 'row': 0, 'color': '#FFCC00', 'order': 7},
- 'resume': {'list': dict(), 'start': -1.0, 'end': -1.0,
- 'row': 0, 'color': '#FFFF88', 'order': 8},
- 'resume_complete': {'list': dict(), 'start': -1.0, 'end': -1.0,
- 'row': 0, 'color': '#FFFFCC', 'order': 9}
- }
- self.phases = self.sortedPhases()
+ self.dmesgtext = [] # dmesg text file in memory
+ self.dmesg = dict() # root data structure
+ self.errorinfo = {'suspend':[],'resume':[]}
+ self.tLow = [] # time spent in low-level suspends (standby/freeze)
+ self.devpids = []
+ self.devicegroups = 0
+ def sortedPhases(self):
+ return sorted(self.dmesg, key=lambda k:self.dmesg[k]['order'])
+ def initDevicegroups(self):
+ # called when phases are all finished being added
+ for phase in self.dmesg.keys():
+ if '*' in phase:
+ p = phase.split('*')
+ pnew = '%s%d' % (p[0], len(p))
+ self.dmesg[pnew] = self.dmesg.pop(phase)
self.devicegroups = []
- for phase in self.phases:
+ for phase in self.sortedPhases():
self.devicegroups.append([phase])
- self.errorinfo = {'suspend':[],'resume':[]}
+ def nextPhase(self, phase, offset):
+ order = self.dmesg[phase]['order'] + offset
+ for p in self.dmesg:
+ if self.dmesg[p]['order'] == order:
+ return p
+ return ''
+ def lastPhase(self):
+ plist = self.sortedPhases()
+ if len(plist) < 1:
+ return ''
+ return plist[-1]
def extractErrorInfo(self):
- elist = {
- 'HWERROR' : '.*\[ *Hardware Error *\].*',
- 'FWBUG' : '.*\[ *Firmware Bug *\].*',
- 'BUG' : '.*BUG.*',
- 'ERROR' : '.*ERROR.*',
- 'WARNING' : '.*WARNING.*',
- 'IRQ' : '.*genirq: .*',
- 'TASKFAIL': '.*Freezing of tasks failed.*',
- }
lf = sysvals.openlog(sysvals.dmesgfile, 'r')
i = 0
list = []
@@ -939,8 +981,8 @@ class Data:
continue
dir = 'suspend' if t < self.tSuspended else 'resume'
msg = m.group('msg')
- for err in elist:
- if re.match(elist[err], msg):
+ for err in self.errlist:
+ if re.match(self.errlist[err], msg):
list.append((err, dir, t, i, i))
self.kerror = True
break
@@ -956,7 +998,7 @@ class Data:
def setEnd(self, time):
self.end = time
def isTraceEventOutsideDeviceCalls(self, pid, time):
- for phase in self.phases:
+ for phase in self.sortedPhases():
list = self.dmesg[phase]['list']
for dev in list:
d = list[dev]
@@ -964,16 +1006,10 @@ class Data:
time < d['end']):
return False
return True
- def phaseCollision(self, phase, isbegin, line):
- key = 'end'
- if isbegin:
- key = 'start'
- if self.dmesg[phase][key] >= 0:
- sysvals.vprint('IGNORE: %s' % line.strip())
- return True
- return False
def sourcePhase(self, start):
- for phase in self.phases:
+ for phase in self.sortedPhases():
+ if 'machine' in phase:
+ continue
pend = self.dmesg[phase]['end']
if start <= pend:
return phase
@@ -1004,14 +1040,15 @@ class Data:
return tgtdev
def addDeviceFunctionCall(self, displayname, kprobename, proc, pid, start, end, cdata, rdata):
# try to place the call in a device
- tgtdev = self.sourceDevice(self.phases, start, end, pid, 'device')
+ phases = self.sortedPhases()
+ tgtdev = self.sourceDevice(phases, start, end, pid, 'device')
# calls with device pids that occur outside device bounds are dropped
# TODO: include these somehow
if not tgtdev and pid in self.devpids:
return False
# try to place the call in a thread
if not tgtdev:
- tgtdev = self.sourceDevice(self.phases, start, end, pid, 'thread')
+ tgtdev = self.sourceDevice(phases, start, end, pid, 'thread')
# create new thread blocks, expand as new calls are found
if not tgtdev:
if proc == '<...>':
@@ -1053,7 +1090,7 @@ class Data:
def overflowDevices(self):
# get a list of devices that extend beyond the end of this test run
devlist = []
- for phase in self.phases:
+ for phase in self.sortedPhases():
list = self.dmesg[phase]['list']
for devname in list:
dev = list[devname]
@@ -1064,7 +1101,7 @@ class Data:
# merge any devices that overlap devlist
for dev in devlist:
devname = dev['name']
- for phase in self.phases:
+ for phase in self.sortedPhases():
list = self.dmesg[phase]['list']
if devname not in list:
continue
@@ -1079,7 +1116,7 @@ class Data:
del list[devname]
def usurpTouchingThread(self, name, dev):
# the caller test has priority of this thread, give it to him
- for phase in self.phases:
+ for phase in self.sortedPhases():
list = self.dmesg[phase]['list']
if name in list:
tdev = list[name]
@@ -1093,7 +1130,7 @@ class Data:
break
def stitchTouchingThreads(self, testlist):
# merge any threads between tests that touch
- for phase in self.phases:
+ for phase in self.sortedPhases():
list = self.dmesg[phase]['list']
for devname in list:
dev = list[devname]
@@ -1103,7 +1140,7 @@ class Data:
data.usurpTouchingThread(devname, dev)
def optimizeDevSrc(self):
# merge any src call loops to reduce timeline size
- for phase in self.phases:
+ for phase in self.sortedPhases():
list = self.dmesg[phase]['list']
for dev in list:
if 'src' not in list[dev]:
@@ -1141,7 +1178,7 @@ class Data:
self.tKernSus = self.trimTimeVal(self.tKernSus, t0, dT, left)
self.tKernRes = self.trimTimeVal(self.tKernRes, t0, dT, left)
self.end = self.trimTimeVal(self.end, t0, dT, left)
- for phase in self.phases:
+ for phase in self.sortedPhases():
p = self.dmesg[phase]
p['start'] = self.trimTimeVal(p['start'], t0, dT, left)
p['end'] = self.trimTimeVal(p['end'], t0, dT, left)
@@ -1150,6 +1187,7 @@ class Data:
d = list[name]
d['start'] = self.trimTimeVal(d['start'], t0, dT, left)
d['end'] = self.trimTimeVal(d['end'], t0, dT, left)
+ d['length'] = d['end'] - d['start']
if('ftrace' in d):
cg = d['ftrace']
cg.start = self.trimTimeVal(cg.start, t0, dT, left)
@@ -1166,30 +1204,59 @@ class Data:
tm = self.trimTimeVal(tm, t0, dT, left)
list.append((type, tm, idx1, idx2))
self.errorinfo[dir] = list
- def normalizeTime(self, tZero):
+ def trimFreezeTime(self, tZero):
# trim out any standby or freeze clock time
- if(self.tSuspended != self.tResumed):
- if(self.tResumed > tZero):
- self.trimTime(self.tSuspended, \
- self.tResumed-self.tSuspended, True)
- else:
- self.trimTime(self.tSuspended, \
- self.tResumed-self.tSuspended, False)
+ lp = ''
+ for phase in self.sortedPhases():
+ if 'resume_machine' in phase and 'suspend_machine' in lp:
+ tS, tR = self.dmesg[lp]['end'], self.dmesg[phase]['start']
+ tL = tR - tS
+ if tL > 0:
+ left = True if tR > tZero else False
+ self.trimTime(tS, tL, left)
+ self.tLow.append('%.0f'%(tL*1000))
+ lp = phase
def getTimeValues(self):
- sktime = (self.dmesg['suspend_machine']['end'] - \
- self.tKernSus) * 1000
- rktime = (self.dmesg['resume_complete']['end'] - \
- self.dmesg['resume_machine']['start']) * 1000
+ if 'suspend_machine' in self.dmesg:
+ sktime = (self.dmesg['suspend_machine']['end'] - \
+ self.tKernSus) * 1000
+ else:
+ sktime = (self.tSuspended - self.tKernSus) * 1000
+ if 'resume_machine' in self.dmesg:
+ rktime = (self.tKernRes - \
+ self.dmesg['resume_machine']['start']) * 1000
+ else:
+ rktime = (self.tKernRes - self.tResumed) * 1000
return (sktime, rktime)
- def setPhase(self, phase, ktime, isbegin):
+ def setPhase(self, phase, ktime, isbegin, order=-1):
if(isbegin):
+ # phase start over current phase
+ if self.currphase:
+ if 'resume_machine' not in self.currphase:
+ sysvals.vprint('WARNING: phase %s failed to end' % self.currphase)
+ self.dmesg[self.currphase]['end'] = ktime
+ phases = self.dmesg.keys()
+ color = self.phasedef[phase]['color']
+ count = len(phases) if order < 0 else order
+ # create unique name for every new phase
+ while phase in phases:
+ phase += '*'
+ self.dmesg[phase] = {'list': dict(), 'start': -1.0, 'end': -1.0,
+ 'row': 0, 'color': color, 'order': count}
self.dmesg[phase]['start'] = ktime
+ self.currphase = phase
else:
+ # phase end without a start
+ if phase not in self.currphase:
+ if self.currphase:
+ sysvals.vprint('WARNING: %s ended instead of %s, ftrace corruption?' % (phase, self.currphase))
+ else:
+ sysvals.vprint('WARNING: %s ended without a start, ftrace corruption?' % phase)
+ return phase
+ phase = self.currphase
self.dmesg[phase]['end'] = ktime
- def dmesgSortVal(self, phase):
- return self.dmesg[phase]['order']
- def sortedPhases(self):
- return sorted(self.dmesg, key=self.dmesgSortVal)
+ self.currphase = ''
+ return phase
def sortedDevices(self, phase):
list = self.dmesg[phase]['list']
slist = []
@@ -1208,13 +1275,13 @@ class Data:
for devname in phaselist:
dev = phaselist[devname]
if(dev['end'] < 0):
- for p in self.phases:
+ for p in self.sortedPhases():
if self.dmesg[p]['end'] > dev['start']:
dev['end'] = self.dmesg[p]['end']
break
sysvals.vprint('%s (%s): callback didnt return' % (devname, phase))
def deviceFilter(self, devicefilter):
- for phase in self.phases:
+ for phase in self.sortedPhases():
list = self.dmesg[phase]['list']
rmlist = []
for name in list:
@@ -1229,7 +1296,7 @@ class Data:
del list[name]
def fixupInitcallsThatDidntReturn(self):
# if any calls never returned, clip them at system resume end
- for phase in self.phases:
+ for phase in self.sortedPhases():
self.fixupInitcalls(phase)
def phaseOverlap(self, phases):
rmgroups = []
@@ -1248,17 +1315,18 @@ class Data:
self.devicegroups.append(newgroup)
def newActionGlobal(self, name, start, end, pid=-1, color=''):
# which phase is this device callback or action in
+ phases = self.sortedPhases()
targetphase = 'none'
htmlclass = ''
overlap = 0.0
- phases = []
- for phase in self.phases:
+ myphases = []
+ for phase in phases:
pstart = self.dmesg[phase]['start']
pend = self.dmesg[phase]['end']
# see if the action overlaps this phase
o = max(0, min(end, pend) - max(start, pstart))
if o > 0:
- phases.append(phase)
+ myphases.append(phase)
# set the target phase to the one that overlaps most
if o > overlap:
if overlap > 0 and phase == 'post_resume':
@@ -1267,19 +1335,19 @@ class Data:
overlap = o
# if no target phase was found, pin it to the edge
if targetphase == 'none':
- p0start = self.dmesg[self.phases[0]]['start']
+ p0start = self.dmesg[phases[0]]['start']
if start <= p0start:
- targetphase = self.phases[0]
+ targetphase = phases[0]
else:
- targetphase = self.phases[-1]
+ targetphase = phases[-1]
if pid == -2:
htmlclass = ' bg'
elif pid == -3:
htmlclass = ' ps'
- if len(phases) > 1:
+ if len(myphases) > 1:
htmlclass = ' bg'
- self.phaseOverlap(phases)
- if targetphase in self.phases:
+ self.phaseOverlap(myphases)
+ if targetphase in phases:
newname = self.newAction(targetphase, name, pid, '', start, end, '', htmlclass, color)
return (targetphase, newname)
return False
@@ -1315,7 +1383,7 @@ class Data:
sysvals.vprint('Timeline Details:')
sysvals.vprint(' test start: %f' % self.start)
sysvals.vprint('kernel suspend start: %f' % self.tKernSus)
- for phase in self.phases:
+ for phase in self.sortedPhases():
dc = len(self.dmesg[phase]['list'])
sysvals.vprint(' %16s: %f - %f (%d devices)' % (phase, \
self.dmesg[phase]['start'], self.dmesg[phase]['end'], dc))
@@ -1323,7 +1391,7 @@ class Data:
sysvals.vprint(' test end: %f' % self.end)
def deviceChildrenAllPhases(self, devname):
devlist = []
- for phase in self.phases:
+ for phase in self.sortedPhases():
list = self.deviceChildren(devname, phase)
for dev in list:
if dev not in devlist:
@@ -1344,7 +1412,7 @@ class Data:
if node.name:
info = ''
drv = ''
- for phase in self.phases:
+ for phase in self.sortedPhases():
list = self.dmesg[phase]['list']
if node.name in list:
s = list[node.name]['start']
@@ -1478,8 +1546,29 @@ class Data:
c = self.addProcessUsageEvent(ps, tres)
if c > 0:
sysvals.vprint('%25s (res): %d' % (ps, c))
+ def handleEndMarker(self, time):
+ dm = self.dmesg
+ self.setEnd(time)
+ self.initDevicegroups()
+ # give suspend_prepare an end if needed
+ if 'suspend_prepare' in dm and dm['suspend_prepare']['end'] < 0:
+ dm['suspend_prepare']['end'] = time
+ # assume resume machine ends at next phase start
+ if 'resume_machine' in dm and dm['resume_machine']['end'] < 0:
+ np = self.nextPhase('resume_machine', 1)
+ if np:
+ dm['resume_machine']['end'] = dm[np]['start']
+ # if kernel resume end not found, assume its the end marker
+ if self.tKernRes == 0.0:
+ self.tKernRes = time
+ # if kernel suspend start not found, assume its the end marker
+ if self.tKernSus == 0.0:
+ self.tKernSus = time
+ # set resume complete to end at end marker
+ if 'resume_complete' in dm:
+ dm['resume_complete']['end'] = time
def debugPrint(self):
- for p in self.phases:
+ for p in self.sortedPhases():
list = self.dmesg[p]['list']
for devname in list:
dev = list[devname]
@@ -1490,9 +1579,9 @@ class Data:
# Description:
# A container for kprobe function data we want in the dev timeline
class DevFunction:
- row = 0
- count = 1
def __init__(self, name, args, caller, ret, start, end, u, proc, pid, color):
+ self.row = 0
+ self.count = 1
self.name = name
self.args = args
self.caller = caller
@@ -1546,16 +1635,15 @@ class DevFunction:
# suspend_resume: phase or custom exec block data
# device_pm_callback: device callback info
class FTraceLine:
- time = 0.0
- length = 0.0
- fcall = False
- freturn = False
- fevent = False
- fkprobe = False
- depth = 0
- name = ''
- type = ''
def __init__(self, t, m='', d=''):
+ self.length = 0.0
+ self.fcall = False
+ self.freturn = False
+ self.fevent = False
+ self.fkprobe = False
+ self.depth = 0
+ self.name = ''
+ self.type = ''
self.time = float(t)
if not m and not d:
return
@@ -1675,19 +1763,13 @@ class FTraceLine:
# Each instance is tied to a single device in a single phase, and is
# comprised of an ordered list of FTraceLine objects
class FTraceCallGraph:
- id = ''
- start = -1.0
- end = -1.0
- list = []
- invalid = False
- depth = 0
- pid = 0
- name = ''
- partial = False
vfname = 'missing_function_name'
- ignore = False
- sv = 0
def __init__(self, pid, sv):
+ self.id = ''
+ self.invalid = False
+ self.name = ''
+ self.partial = False
+ self.ignore = False
self.start = -1.0
self.end = -1.0
self.list = []
@@ -1943,7 +2025,7 @@ class FTraceCallGraph:
dev['ftrace'] = cg
found = devname
return found
- for p in data.phases:
+ for p in data.sortedPhases():
if(data.dmesg[p]['start'] <= self.start and
self.start <= data.dmesg[p]['end']):
list = data.dmesg[p]['list']
@@ -1966,7 +2048,7 @@ class FTraceCallGraph:
if fs < data.start or fe > data.end:
return
phase = ''
- for p in data.phases:
+ for p in data.sortedPhases():
if(data.dmesg[p]['start'] <= self.start and
self.start < data.dmesg[p]['end']):
phase = p
@@ -2008,23 +2090,20 @@ class DevItem:
# A container for a device timeline which calculates
# all the html properties to display it correctly
class Timeline:
- html = ''
- height = 0 # total timeline height
- scaleH = 20 # timescale (top) row height
- rowH = 30 # device row height
- bodyH = 0 # body height
- rows = 0 # total timeline rows
- rowlines = dict()
- rowheight = dict()
html_tblock = '<div id="block{0}" class="tblock" style="left:{1}%;width:{2}%;"><div class="tback" style="height:{3}px"></div>\n'
html_device = '<div id="{0}" title="{1}" class="thread{7}" style="left:{2}%;top:{3}px;height:{4}px;width:{5}%;{8}">{6}</div>\n'
html_phase = '<div class="phase" style="left:{0}%;width:{1}%;top:{2}px;height:{3}px;background:{4}">{5}</div>\n'
html_phaselet = '<div id="{0}" class="phaselet" style="left:{1}%;width:{2}%;background:{3}"></div>\n'
html_legend = '<div id="p{3}" class="square" style="left:{0}%;background:{1}">&nbsp;{2}</div>\n'
def __init__(self, rowheight, scaleheight):
- self.rowH = rowheight
- self.scaleH = scaleheight
self.html = ''
+ self.height = 0 # total timeline height
+ self.scaleH = scaleheight # timescale (top) row height
+ self.rowH = rowheight # device row height
+ self.bodyH = 0 # body height
+ self.rows = 0 # total timeline rows
+ self.rowlines = dict()
+ self.rowheight = dict()
def createHeader(self, sv, stamp):
if(not stamp['time']):
return
@@ -2251,18 +2330,18 @@ class Timeline:
# Description:
# A list of values describing the properties of these test runs
class TestProps:
- stamp = ''
- sysinfo = ''
- cmdline = ''
- kparams = ''
- S0i3 = False
- fwdata = []
stampfmt = '# [a-z]*-(?P<m>[0-9]{2})(?P<d>[0-9]{2})(?P<y>[0-9]{2})-'+\
'(?P<H>[0-9]{2})(?P<M>[0-9]{2})(?P<S>[0-9]{2})'+\
' (?P<host>.*) (?P<mode>.*) (?P<kernel>.*)$'
+ batteryfmt = '^# battery (?P<a1>\w*) (?P<c1>\d*) (?P<a2>\w*) (?P<c2>\d*)'
+ testerrfmt = '^# enter_sleep_error (?P<e>.*)'
sysinfofmt = '^# sysinfo .*'
cmdlinefmt = '^# command \| (?P<cmd>.*)'
kparamsfmt = '^# kparams \| (?P<kp>.*)'
+ devpropfmt = '# Device Properties: .*'
+ tracertypefmt = '# tracer: (?P<t>.*)'
+ firmwarefmt = '# fwsuspend (?P<s>[0-9]*) fwresume (?P<r>[0-9]*)$'
+ procexecfmt = 'ps - (?P<ps>.*)$'
ftrace_line_fmt_fg = \
'^ *(?P<time>[0-9\.]*) *\| *(?P<cpu>[0-9]*)\)'+\
' *(?P<proc>.*)-(?P<pid>[0-9]*) *\|'+\
@@ -2271,11 +2350,17 @@ class TestProps:
' *(?P<proc>.*)-(?P<pid>[0-9]*) *\[(?P<cpu>[0-9]*)\] *'+\
'(?P<flags>.{4}) *(?P<time>[0-9\.]*): *'+\
'(?P<msg>.*)'
- ftrace_line_fmt = ftrace_line_fmt_nop
- cgformat = False
- data = 0
- ktemp = dict()
def __init__(self):
+ self.stamp = ''
+ self.sysinfo = ''
+ self.cmdline = ''
+ self.kparams = ''
+ self.testerror = []
+ self.battery = []
+ self.fwdata = []
+ self.ftrace_line_fmt = self.ftrace_line_fmt_nop
+ self.cgformat = False
+ self.data = 0
self.ktemp = dict()
def setTracerType(self, tracer):
if(tracer == 'function_graph'):
@@ -2286,6 +2371,7 @@ class TestProps:
else:
doError('Invalid tracer format: [%s]' % tracer)
def parseStamp(self, data, sv):
+ # global test data
m = re.match(self.stampfmt, self.stamp)
data.stamp = {'time': '', 'host': '', 'mode': ''}
dt = datetime(int(m.group('y'))+2000, int(m.group('m')),
@@ -2324,23 +2410,36 @@ class TestProps:
sv.kparams = m.group('kp')
if not sv.stamp:
sv.stamp = data.stamp
+ # firmware data
+ if sv.suspendmode == 'mem' and len(self.fwdata) > data.testnumber:
+ data.fwSuspend, data.fwResume = self.fwdata[data.testnumber]
+ if(data.fwSuspend > 0 or data.fwResume > 0):
+ data.fwValid = True
+ # battery data
+ if len(self.battery) > data.testnumber:
+ m = re.match(self.batteryfmt, self.battery[data.testnumber])
+ if m:
+ data.battery = m.groups()
+ # sleep mode enter errors
+ if len(self.testerror) > data.testnumber:
+ m = re.match(self.testerrfmt, self.testerror[data.testnumber])
+ if m:
+ data.enterfail = m.group('e')
# Class: TestRun
# Description:
# A container for a suspend/resume test run. This is necessary as
# there could be more than one, and they need to be separate.
class TestRun:
- ftemp = dict()
- ttemp = dict()
- data = 0
def __init__(self, dataobj):
self.data = dataobj
self.ftemp = dict()
self.ttemp = dict()
class ProcessMonitor:
- proclist = dict()
- running = False
+ def __init__(self):
+ self.proclist = dict()
+ self.running = False
def procstat(self):
c = ['cat /proc/[1-9]*/stat 2>/dev/null']
process = Popen(c, shell=True, stdout=PIPE)
@@ -2391,8 +2490,8 @@ class ProcessMonitor:
# markers, and/or kprobes required for primary parsing.
def doesTraceLogHaveTraceEvents():
kpcheck = ['_cal: (', '_cpu_down()']
- techeck = ['suspend_resume']
- tmcheck = ['SUSPEND START', 'RESUME COMPLETE']
+ techeck = ['suspend_resume', 'device_pm_callback']
+ tmcheck = ['tracing_mark_write']
sysvals.usekprobes = False
fp = sysvals.openlog(sysvals.ftracefile, 'r')
for line in fp:
@@ -2414,23 +2513,14 @@ def doesTraceLogHaveTraceEvents():
check.remove(i)
tmcheck = check
fp.close()
- if len(techeck) == 0:
- sysvals.usetraceevents = True
- else:
- sysvals.usetraceevents = False
- if len(tmcheck) == 0:
- sysvals.usetracemarkers = True
- else:
- sysvals.usetracemarkers = False
+ sysvals.usetraceevents = True if len(techeck) < 2 else False
+ sysvals.usetracemarkers = True if len(tmcheck) == 0 else False
# Function: appendIncompleteTraceLog
# Description:
# [deprecated for kernel 3.15 or newer]
-# Legacy support of ftrace outputs that lack the device_pm_callback
-# and/or suspend_resume trace events. The primary data should be
-# taken from dmesg, and this ftrace is used only for callgraph data
-# or custom actions in the timeline. The data is appended to the Data
-# objects provided.
+# Adds callgraph data which lacks trace event data. This is only
+# for timelines generated from 3.15 or older
# Arguments:
# testruns: the array of Data objects obtained from parseKernelLog
def appendIncompleteTraceLog(testruns):
@@ -2460,13 +2550,19 @@ def appendIncompleteTraceLog(testruns):
elif re.match(tp.cmdlinefmt, line):
tp.cmdline = line
continue
+ elif re.match(tp.batteryfmt, line):
+ tp.battery.append(line)
+ continue
+ elif re.match(tp.testerrfmt, line):
+ tp.testerror.append(line)
+ continue
# determine the trace data type (required for further parsing)
- m = re.match(sysvals.tracertypefmt, line)
+ m = re.match(tp.tracertypefmt, line)
if(m):
tp.setTracerType(m.group('t'))
continue
# device properties line
- if(re.match(sysvals.devpropfmt, line)):
+ if(re.match(tp.devpropfmt, line)):
devProps(line)
continue
# parse only valid lines, if this is not one move on
@@ -2506,87 +2602,7 @@ def appendIncompleteTraceLog(testruns):
continue
# trace event processing
if(t.fevent):
- # general trace events have two types, begin and end
- if(re.match('(?P<name>.*) begin$', t.name)):
- isbegin = True
- elif(re.match('(?P<name>.*) end$', t.name)):
- isbegin = False
- else:
- continue
- m = re.match('(?P<name>.*)\[(?P<val>[0-9]*)\] .*', t.name)
- if(m):
- val = m.group('val')
- if val == '0':
- name = m.group('name')
- else:
- name = m.group('name')+'['+val+']'
- else:
- m = re.match('(?P<name>.*) .*', t.name)
- name = m.group('name')
- # special processing for trace events
- if re.match('dpm_prepare\[.*', name):
- continue
- elif re.match('machine_suspend.*', name):
- continue
- elif re.match('suspend_enter\[.*', name):
- if(not isbegin):
- data.dmesg['suspend_prepare']['end'] = t.time
- continue
- elif re.match('dpm_suspend\[.*', name):
- if(not isbegin):
- data.dmesg['suspend']['end'] = t.time
- continue
- elif re.match('dpm_suspend_late\[.*', name):
- if(isbegin):
- data.dmesg['suspend_late']['start'] = t.time
- else:
- data.dmesg['suspend_late']['end'] = t.time
- continue
- elif re.match('dpm_suspend_noirq\[.*', name):
- if(isbegin):
- data.dmesg['suspend_noirq']['start'] = t.time
- else:
- data.dmesg['suspend_noirq']['end'] = t.time
- continue
- elif re.match('dpm_resume_noirq\[.*', name):
- if(isbegin):
- data.dmesg['resume_machine']['end'] = t.time
- data.dmesg['resume_noirq']['start'] = t.time
- else:
- data.dmesg['resume_noirq']['end'] = t.time
- continue
- elif re.match('dpm_resume_early\[.*', name):
- if(isbegin):
- data.dmesg['resume_early']['start'] = t.time
- else:
- data.dmesg['resume_early']['end'] = t.time
- continue
- elif re.match('dpm_resume\[.*', name):
- if(isbegin):
- data.dmesg['resume']['start'] = t.time
- else:
- data.dmesg['resume']['end'] = t.time
- continue
- elif re.match('dpm_complete\[.*', name):
- if(isbegin):
- data.dmesg['resume_complete']['start'] = t.time
- else:
- data.dmesg['resume_complete']['end'] = t.time
- continue
- # skip trace events inside devices calls
- if(not data.isTraceEventOutsideDeviceCalls(pid, t.time)):
- continue
- # global events (outside device calls) are simply graphed
- if(isbegin):
- # store each trace event in ttemp
- if(name not in testrun[testidx].ttemp):
- testrun[testidx].ttemp[name] = []
- testrun[testidx].ttemp[name].append(\
- {'begin': t.time, 'end': t.time})
- else:
- # finish off matching trace event in ttemp
- if(name in testrun[testidx].ttemp):
- testrun[testidx].ttemp[name][-1]['end'] = t.time
+ continue
# call/return processing
elif sysvals.usecallgraph:
# create a callgraph object for the data
@@ -2603,12 +2619,6 @@ def appendIncompleteTraceLog(testruns):
tf.close()
for test in testrun:
- # add the traceevent data to the device hierarchy
- if(sysvals.usetraceevents):
- for name in test.ttemp:
- for event in test.ttemp[name]:
- test.data.newActionGlobal(name, event['begin'], event['end'])
-
# add the callgraph data to the device hierarchy
for pid in test.ftemp:
for cg in test.ftemp[pid]:
@@ -2621,7 +2631,7 @@ def appendIncompleteTraceLog(testruns):
continue
callstart = cg.start
callend = cg.end
- for p in test.data.phases:
+ for p in test.data.sortedPhases():
if(test.data.dmesg[p]['start'] <= callstart and
callstart <= test.data.dmesg[p]['end']):
list = test.data.dmesg[p]['list']
@@ -2648,10 +2658,12 @@ def parseTraceLog(live=False):
doError('%s does not exist' % sysvals.ftracefile)
if not live:
sysvals.setupAllKprobes()
+ krescalls = ['pm_notifier_call_chain', 'pm_restore_console']
tracewatch = []
if sysvals.usekprobes:
tracewatch += ['sync_filesystems', 'freeze_processes', 'syscore_suspend',
- 'syscore_resume', 'resume_console', 'thaw_processes', 'CPU_ON', 'CPU_OFF']
+ 'syscore_resume', 'resume_console', 'thaw_processes', 'CPU_ON',
+ 'CPU_OFF', 'timekeeping_freeze', 'acpi_suspend']
# extract the callgraph and traceevent data
tp = TestProps()
@@ -2674,18 +2686,24 @@ def parseTraceLog(live=False):
elif re.match(tp.cmdlinefmt, line):
tp.cmdline = line
continue
+ elif re.match(tp.batteryfmt, line):
+ tp.battery.append(line)
+ continue
+ elif re.match(tp.testerrfmt, line):
+ tp.testerror.append(line)
+ continue
# firmware line: pull out any firmware data
- m = re.match(sysvals.firmwarefmt, line)
+ m = re.match(tp.firmwarefmt, line)
if(m):
tp.fwdata.append((int(m.group('s')), int(m.group('r'))))
continue
# tracer type line: determine the trace data type
- m = re.match(sysvals.tracertypefmt, line)
+ m = re.match(tp.tracertypefmt, line)
if(m):
tp.setTracerType(m.group('t'))
continue
# device properties line
- if(re.match(sysvals.devpropfmt, line)):
+ if(re.match(tp.devpropfmt, line)):
devProps(line)
continue
# ignore all other commented lines
@@ -2714,20 +2732,19 @@ def parseTraceLog(live=False):
continue
# find the start of suspend
if(t.startMarker()):
- phase = 'suspend_prepare'
data = Data(len(testdata))
testdata.append(data)
testrun = TestRun(data)
testruns.append(testrun)
tp.parseStamp(data, sysvals)
data.setStart(t.time)
- data.tKernSus = t.time
+ phase = data.setPhase('suspend_prepare', t.time, True)
continue
if(not data):
continue
# process cpu exec line
if t.type == 'tracing_mark_write':
- m = re.match(sysvals.procexecfmt, t.name)
+ m = re.match(tp.procexecfmt, t.name)
if(m):
proclist = dict()
for ps in m.group('ps').split(','):
@@ -2740,28 +2757,17 @@ def parseTraceLog(live=False):
continue
# find the end of resume
if(t.endMarker()):
- data.setEnd(t.time)
- if data.tKernRes == 0.0:
- data.tKernRes = t.time
- if data.dmesg['resume_complete']['end'] < 0:
- data.dmesg['resume_complete']['end'] = t.time
- if sysvals.suspendmode == 'mem' and len(tp.fwdata) > data.testnumber:
- data.fwSuspend, data.fwResume = tp.fwdata[data.testnumber]
- if(data.tSuspended != 0 and data.tResumed != 0 and \
- (data.fwSuspend > 0 or data.fwResume > 0)):
- data.fwValid = True
+ data.handleEndMarker(t.time)
if(not sysvals.usetracemarkers):
# no trace markers? then quit and be sure to finish recording
# the event we used to trigger resume end
- if(len(testrun.ttemp['thaw_processes']) > 0):
+ if('thaw_processes' in testrun.ttemp and len(testrun.ttemp['thaw_processes']) > 0):
# if an entry exists, assume this is its end
testrun.ttemp['thaw_processes'][-1]['end'] = t.time
break
continue
# trace event processing
if(t.fevent):
- if(phase == 'post_resume'):
- data.setEnd(t.time)
if(t.type == 'suspend_resume'):
# suspend_resume trace events have two types, begin and end
if(re.match('(?P<name>.*) begin$', t.name)):
@@ -2786,86 +2792,61 @@ def parseTraceLog(live=False):
# -- phase changes --
# start of kernel suspend
if(re.match('suspend_enter\[.*', t.name)):
- if(isbegin and data.start == data.tKernSus):
- data.dmesg[phase]['start'] = t.time
+ if(isbegin):
data.tKernSus = t.time
continue
# suspend_prepare start
elif(re.match('dpm_prepare\[.*', t.name)):
phase = 'suspend_prepare'
- if(not isbegin):
- data.dmesg[phase]['end'] = t.time
- if data.dmesg[phase]['start'] < 0:
- data.dmesg[phase]['start'] = data.start
+ if not isbegin:
+ data.setPhase(phase, t.time, isbegin)
+ if isbegin and data.tKernSus == 0:
+ data.tKernSus = t.time
continue
# suspend start
elif(re.match('dpm_suspend\[.*', t.name)):
- phase = 'suspend'
- data.setPhase(phase, t.time, isbegin)
+ phase = data.setPhase('suspend', t.time, isbegin)
continue
# suspend_late start
elif(re.match('dpm_suspend_late\[.*', t.name)):
- phase = 'suspend_late'
- data.setPhase(phase, t.time, isbegin)
+ phase = data.setPhase('suspend_late', t.time, isbegin)
continue
# suspend_noirq start
elif(re.match('dpm_suspend_noirq\[.*', t.name)):
- if data.phaseCollision('suspend_noirq', isbegin, line):
- continue
- phase = 'suspend_noirq'
- data.setPhase(phase, t.time, isbegin)
- if(not isbegin):
- phase = 'suspend_machine'
- data.dmesg[phase]['start'] = t.time
+ phase = data.setPhase('suspend_noirq', t.time, isbegin)
continue
# suspend_machine/resume_machine
elif(re.match('machine_suspend\[.*', t.name)):
if(isbegin):
- phase = 'suspend_machine'
- data.dmesg[phase]['end'] = t.time
- data.tSuspended = t.time
- else:
- if(sysvals.suspendmode in ['mem', 'disk'] and not tp.S0i3):
- data.dmesg['suspend_machine']['end'] = t.time
+ lp = data.lastPhase()
+ phase = data.setPhase('suspend_machine', data.dmesg[lp]['end'], True)
+ data.setPhase(phase, t.time, False)
+ if data.tSuspended == 0:
data.tSuspended = t.time
- phase = 'resume_machine'
- data.dmesg[phase]['start'] = t.time
- data.tResumed = t.time
- data.tLow = data.tResumed - data.tSuspended
- continue
- # acpi_suspend
- elif(re.match('acpi_suspend\[.*', t.name)):
- # acpi_suspend[0] S0i3
- if(re.match('acpi_suspend\[0\] begin', t.name)):
- if(sysvals.suspendmode == 'mem'):
- tp.S0i3 = True
- data.dmesg['suspend_machine']['end'] = t.time
+ else:
+ phase = data.setPhase('resume_machine', t.time, True)
+ if(sysvals.suspendmode in ['mem', 'disk']):
+ if 'suspend_machine' in data.dmesg:
+ data.dmesg['suspend_machine']['end'] = t.time
data.tSuspended = t.time
+ if data.tResumed == 0:
+ data.tResumed = t.time
continue
# resume_noirq start
elif(re.match('dpm_resume_noirq\[.*', t.name)):
- if data.phaseCollision('resume_noirq', isbegin, line):
- continue
- phase = 'resume_noirq'
- data.setPhase(phase, t.time, isbegin)
- if(isbegin):
- data.dmesg['resume_machine']['end'] = t.time
+ phase = data.setPhase('resume_noirq', t.time, isbegin)
continue
# resume_early start
elif(re.match('dpm_resume_early\[.*', t.name)):
- phase = 'resume_early'
- data.setPhase(phase, t.time, isbegin)
+ phase = data.setPhase('resume_early', t.time, isbegin)
continue
# resume start
elif(re.match('dpm_resume\[.*', t.name)):
- phase = 'resume'
- data.setPhase(phase, t.time, isbegin)
+ phase = data.setPhase('resume', t.time, isbegin)
continue
# resume complete start
elif(re.match('dpm_complete\[.*', t.name)):
- phase = 'resume_complete'
- if(isbegin):
- data.dmesg[phase]['start'] = t.time
+ phase = data.setPhase('resume_complete', t.time, isbegin)
continue
# skip trace events inside devices calls
if(not data.isTraceEventOutsideDeviceCalls(pid, t.time)):
@@ -2881,13 +2862,10 @@ def parseTraceLog(live=False):
if(len(testrun.ttemp[name]) > 0):
# if an entry exists, assume this is its end
testrun.ttemp[name][-1]['end'] = t.time
- elif(phase == 'post_resume'):
- # post resume events can just have ends
- testrun.ttemp[name].append({
- 'begin': data.dmesg[phase]['start'],
- 'end': t.time})
# device callback start
elif(t.type == 'device_pm_callback_start'):
+ if phase not in data.dmesg:
+ continue
m = re.match('(?P<drv>.*) (?P<d>.*), parent: *(?P<p>.*), .*',\
t.name);
if(not m):
@@ -2901,6 +2879,8 @@ def parseTraceLog(live=False):
data.devpids.append(pid)
# device callback finish
elif(t.type == 'device_pm_callback_end'):
+ if phase not in data.dmesg:
+ continue
m = re.match('(?P<drv>.*) (?P<d>.*), err.*', t.name);
if(not m):
continue
@@ -2941,9 +2921,9 @@ def parseTraceLog(live=False):
e['end'] = t.time
e['rdata'] = kprobedata
# end of kernel resume
- if(kprobename == 'pm_notifier_call_chain' or \
- kprobename == 'pm_restore_console'):
- data.dmesg[phase]['end'] = t.time
+ if(phase != 'suspend_prepare' and kprobename in krescalls):
+ if phase in data.dmesg:
+ data.dmesg[phase]['end'] = t.time
data.tKernRes = t.time
# callgraph processing
@@ -2961,10 +2941,13 @@ def parseTraceLog(live=False):
if(res == -1):
testrun.ftemp[key][-1].addLine(t)
tf.close()
+ if data and not data.devicegroups:
+ sysvals.vprint('WARNING: end marker is missing')
+ data.handleEndMarker(t.time)
if sysvals.suspendmode == 'command':
for test in testruns:
- for p in test.data.phases:
+ for p in test.data.sortedPhases():
if p == 'suspend_prepare':
test.data.dmesg[p]['start'] = test.data.start
test.data.dmesg[p]['end'] = test.data.end
@@ -2973,7 +2956,6 @@ def parseTraceLog(live=False):
test.data.dmesg[p]['end'] = test.data.end
test.data.tSuspended = test.data.end
test.data.tResumed = test.data.end
- test.data.tLow = 0
test.data.fwValid = False
# dev source and procmon events can be unreadable with mixed phase height
@@ -3040,8 +3022,8 @@ def parseTraceLog(live=False):
sortkey = '%f%f%d' % (cg.start, cg.end, pid)
sortlist[sortkey] = cg
elif len(cg.list) > 1000000:
- print 'WARNING: the callgraph for %s is massive (%d lines)' %\
- (devname, len(cg.list))
+ sysvals.vprint('WARNING: the callgraph for %s is massive (%d lines)' %\
+ (devname, len(cg.list)))
# create blocks for orphan cg data
for sortkey in sorted(sortlist):
cg = sortlist[sortkey]
@@ -3057,25 +3039,34 @@ def parseTraceLog(live=False):
for data in testdata:
tn = '' if len(testdata) == 1 else ('%d' % (data.testnumber + 1))
terr = ''
- lp = data.phases[0]
- for p in data.phases:
- if(data.dmesg[p]['start'] < 0 and data.dmesg[p]['end'] < 0):
+ phasedef = data.phasedef
+ lp = 'suspend_prepare'
+ for p in sorted(phasedef, key=lambda k:phasedef[k]['order']):
+ if p not in data.dmesg:
if not terr:
print 'TEST%s FAILED: %s failed in %s phase' % (tn, sysvals.suspendmode, lp)
terr = '%s%s failed in %s phase' % (sysvals.suspendmode, tn, lp)
error.append(terr)
+ if data.tSuspended == 0:
+ data.tSuspended = data.dmesg[lp]['end']
+ if data.tResumed == 0:
+ data.tResumed = data.dmesg[lp]['end']
+ data.fwValid = False
sysvals.vprint('WARNING: phase "%s" is missing!' % p)
- if(data.dmesg[p]['start'] < 0):
- data.dmesg[p]['start'] = data.dmesg[lp]['end']
- if(p == 'resume_machine'):
- data.tSuspended = data.dmesg[lp]['end']
- data.tResumed = data.dmesg[lp]['end']
- data.tLow = 0
- if(data.dmesg[p]['end'] < 0):
- data.dmesg[p]['end'] = data.dmesg[p]['start']
+ lp = p
+ if not terr and data.enterfail:
+ print 'test%s FAILED: enter %s failed with %s' % (tn, sysvals.suspendmode, data.enterfail)
+ terr = 'test%s failed to enter %s mode' % (tn, sysvals.suspendmode)
+ error.append(terr)
+ lp = data.sortedPhases()[0]
+ for p in data.sortedPhases():
if(p != lp and not ('machine' in p and 'machine' in lp)):
data.dmesg[lp]['end'] = data.dmesg[p]['start']
lp = p
+ if data.tSuspended == 0:
+ data.tSuspended = data.tKernRes
+ if data.tResumed == 0:
+ data.tResumed = data.tSuspended
if(len(sysvals.devicefilter) > 0):
data.deviceFilter(sysvals.devicefilter)
@@ -3127,7 +3118,13 @@ def loadKernelLog():
elif re.match(tp.cmdlinefmt, line):
tp.cmdline = line
continue
- m = re.match(sysvals.firmwarefmt, line)
+ elif re.match(tp.batteryfmt, line):
+ tp.battery.append(line)
+ continue
+ elif re.match(tp.testerrfmt, line):
+ tp.testerror.append(line)
+ continue
+ m = re.match(tp.firmwarefmt, line)
if(m):
tp.fwdata.append((int(m.group('s')), int(m.group('r'))))
continue
@@ -3140,10 +3137,6 @@ def loadKernelLog():
testruns.append(data)
data = Data(len(testruns))
tp.parseStamp(data, sysvals)
- if len(tp.fwdata) > data.testnumber:
- data.fwSuspend, data.fwResume = tp.fwdata[data.testnumber]
- if(data.fwSuspend > 0 or data.fwResume > 0):
- data.fwValid = True
if(not data):
continue
m = re.match('.* *(?P<k>[0-9]\.[0-9]{2}\.[0-9]-.*) .*', msg)
@@ -3199,30 +3192,30 @@ def parseKernelLog(data):
# dmesg phase match table
dm = {
- 'suspend_prepare': 'PM: Syncing filesystems.*',
- 'suspend': 'PM: Entering [a-z]* sleep.*',
- 'suspend_late': 'PM: suspend of devices complete after.*',
- 'suspend_noirq': 'PM: late suspend of devices complete after.*',
- 'suspend_machine': 'PM: noirq suspend of devices complete after.*',
- 'resume_machine': 'ACPI: Low-level resume complete.*',
- 'resume_noirq': 'ACPI: Waking up from system sleep state.*',
- 'resume_early': 'PM: noirq resume of devices complete after.*',
- 'resume': 'PM: early resume of devices complete after.*',
- 'resume_complete': 'PM: resume of devices complete after.*',
- 'post_resume': '.*Restarting tasks \.\.\..*',
+ 'suspend_prepare': ['PM: Syncing filesystems.*'],
+ 'suspend': ['PM: Entering [a-z]* sleep.*', 'Suspending console.*'],
+ 'suspend_late': ['PM: suspend of devices complete after.*'],
+ 'suspend_noirq': ['PM: late suspend of devices complete after.*'],
+ 'suspend_machine': ['PM: noirq suspend of devices complete after.*'],
+ 'resume_machine': ['ACPI: Low-level resume complete.*'],
+ 'resume_noirq': ['ACPI: Waking up from system sleep state.*'],
+ 'resume_early': ['PM: noirq resume of devices complete after.*'],
+ 'resume': ['PM: early resume of devices complete after.*'],
+ 'resume_complete': ['PM: resume of devices complete after.*'],
+ 'post_resume': ['.*Restarting tasks \.\.\..*'],
}
if(sysvals.suspendmode == 'standby'):
- dm['resume_machine'] = 'PM: Restoring platform NVS memory'
+ dm['resume_machine'] = ['PM: Restoring platform NVS memory']
elif(sysvals.suspendmode == 'disk'):
- dm['suspend_late'] = 'PM: freeze of devices complete after.*'
- dm['suspend_noirq'] = 'PM: late freeze of devices complete after.*'
- dm['suspend_machine'] = 'PM: noirq freeze of devices complete after.*'
- dm['resume_machine'] = 'PM: Restoring platform NVS memory'
- dm['resume_early'] = 'PM: noirq restore of devices complete after.*'
- dm['resume'] = 'PM: early restore of devices complete after.*'
- dm['resume_complete'] = 'PM: restore of devices complete after.*'
+ dm['suspend_late'] = ['PM: freeze of devices complete after.*']
+ dm['suspend_noirq'] = ['PM: late freeze of devices complete after.*']
+ dm['suspend_machine'] = ['PM: noirq freeze of devices complete after.*']
+ dm['resume_machine'] = ['PM: Restoring platform NVS memory']
+ dm['resume_early'] = ['PM: noirq restore of devices complete after.*']
+ dm['resume'] = ['PM: early restore of devices complete after.*']
+ dm['resume_complete'] = ['PM: restore of devices complete after.*']
elif(sysvals.suspendmode == 'freeze'):
- dm['resume_machine'] = 'ACPI: resume from mwait'
+ dm['resume_machine'] = ['ACPI: resume from mwait']
# action table (expected events that occur and show up in dmesg)
at = {
@@ -3264,81 +3257,89 @@ def parseKernelLog(data):
else:
continue
+ # check for a phase change line
+ phasechange = False
+ for p in dm:
+ for s in dm[p]:
+ if(re.match(s, msg)):
+ phasechange, phase = True, p
+ break
+
# hack for determining resume_machine end for freeze
if(not sysvals.usetraceevents and sysvals.suspendmode == 'freeze' \
and phase == 'resume_machine' and \
re.match('calling (?P<f>.*)\+ @ .*, parent: .*', msg)):
- data.dmesg['resume_machine']['end'] = ktime
+ data.setPhase(phase, ktime, False)
phase = 'resume_noirq'
- data.dmesg[phase]['start'] = ktime
-
- # suspend start
- if(re.match(dm['suspend_prepare'], msg)):
- phase = 'suspend_prepare'
- data.dmesg[phase]['start'] = ktime
- data.setStart(ktime)
- data.tKernSus = ktime
- # suspend start
- elif(re.match(dm['suspend'], msg)):
- data.dmesg['suspend_prepare']['end'] = ktime
- phase = 'suspend'
- data.dmesg[phase]['start'] = ktime
- # suspend_late start
- elif(re.match(dm['suspend_late'], msg)):
- data.dmesg['suspend']['end'] = ktime
- phase = 'suspend_late'
- data.dmesg[phase]['start'] = ktime
- # suspend_noirq start
- elif(re.match(dm['suspend_noirq'], msg)):
- data.dmesg['suspend_late']['end'] = ktime
- phase = 'suspend_noirq'
- data.dmesg[phase]['start'] = ktime
- # suspend_machine start
- elif(re.match(dm['suspend_machine'], msg)):
- data.dmesg['suspend_noirq']['end'] = ktime
- phase = 'suspend_machine'
- data.dmesg[phase]['start'] = ktime
- # resume_machine start
- elif(re.match(dm['resume_machine'], msg)):
- if(sysvals.suspendmode in ['freeze', 'standby']):
- data.tSuspended = prevktime
- data.dmesg['suspend_machine']['end'] = prevktime
- else:
- data.tSuspended = ktime
- data.dmesg['suspend_machine']['end'] = ktime
- phase = 'resume_machine'
- data.tResumed = ktime
- data.tLow = data.tResumed - data.tSuspended
- data.dmesg[phase]['start'] = ktime
- # resume_noirq start
- elif(re.match(dm['resume_noirq'], msg)):
- data.dmesg['resume_machine']['end'] = ktime
- phase = 'resume_noirq'
- data.dmesg[phase]['start'] = ktime
- # resume_early start
- elif(re.match(dm['resume_early'], msg)):
- data.dmesg['resume_noirq']['end'] = ktime
- phase = 'resume_early'
- data.dmesg[phase]['start'] = ktime
- # resume start
- elif(re.match(dm['resume'], msg)):
- data.dmesg['resume_early']['end'] = ktime
- phase = 'resume'
- data.dmesg[phase]['start'] = ktime
- # resume complete start
- elif(re.match(dm['resume_complete'], msg)):
- data.dmesg['resume']['end'] = ktime
- phase = 'resume_complete'
- data.dmesg[phase]['start'] = ktime
- # post resume start
- elif(re.match(dm['post_resume'], msg)):
- data.dmesg['resume_complete']['end'] = ktime
- data.setEnd(ktime)
- data.tKernRes = ktime
- break
+ data.setPhase(phase, ktime, True)
+
+ if phasechange:
+ if phase == 'suspend_prepare':
+ data.setPhase(phase, ktime, True)
+ data.setStart(ktime)
+ data.tKernSus = ktime
+ elif phase == 'suspend':
+ lp = data.lastPhase()
+ if lp:
+ data.setPhase(lp, ktime, False)
+ data.setPhase(phase, ktime, True)
+ elif phase == 'suspend_late':
+ lp = data.lastPhase()
+ if lp:
+ data.setPhase(lp, ktime, False)
+ data.setPhase(phase, ktime, True)
+ elif phase == 'suspend_noirq':
+ lp = data.lastPhase()
+ if lp:
+ data.setPhase(lp, ktime, False)
+ data.setPhase(phase, ktime, True)
+ elif phase == 'suspend_machine':
+ lp = data.lastPhase()
+ if lp:
+ data.setPhase(lp, ktime, False)
+ data.setPhase(phase, ktime, True)
+ elif phase == 'resume_machine':
+ lp = data.lastPhase()
+ if(sysvals.suspendmode in ['freeze', 'standby']):
+ data.tSuspended = prevktime
+ if lp:
+ data.setPhase(lp, prevktime, False)
+ else:
+ data.tSuspended = ktime
+ if lp:
+ data.setPhase(lp, prevktime, False)
+ data.tResumed = ktime
+ data.setPhase(phase, ktime, True)
+ elif phase == 'resume_noirq':
+ lp = data.lastPhase()
+ if lp:
+ data.setPhase(lp, ktime, False)
+ data.setPhase(phase, ktime, True)
+ elif phase == 'resume_early':
+ lp = data.lastPhase()
+ if lp:
+ data.setPhase(lp, ktime, False)
+ data.setPhase(phase, ktime, True)
+ elif phase == 'resume':
+ lp = data.lastPhase()
+ if lp:
+ data.setPhase(lp, ktime, False)
+ data.setPhase(phase, ktime, True)
+ elif phase == 'resume_complete':
+ lp = data.lastPhase()
+ if lp:
+ data.setPhase(lp, ktime, False)
+ data.setPhase(phase, ktime, True)
+ elif phase == 'post_resume':
+ lp = data.lastPhase()
+ if lp:
+ data.setPhase(lp, ktime, False)
+ data.setEnd(ktime)
+ data.tKernRes = ktime
+ break
# -- device callbacks --
- if(phase in data.phases):
+ if(phase in data.sortedPhases()):
# device init call
if(re.match('calling (?P<f>.*)\+ @ .*, parent: .*', msg)):
sm = re.match('calling (?P<f>.*)\+ @ '+\
@@ -3396,24 +3397,31 @@ def parseKernelLog(data):
actions[cpu].append({'begin': cpu_start, 'end': ktime})
cpu_start = ktime
prevktime = ktime
+ data.initDevicegroups()
# fill in any missing phases
- lp = data.phases[0]
- for p in data.phases:
- if(data.dmesg[p]['start'] < 0 and data.dmesg[p]['end'] < 0):
- print('WARNING: phase "%s" is missing, something went wrong!' % p)
- print(' In %s, this dmesg line denotes the start of %s:' % \
- (sysvals.suspendmode, p))
- print(' "%s"' % dm[p])
- if(data.dmesg[p]['start'] < 0):
- data.dmesg[p]['start'] = data.dmesg[lp]['end']
- if(p == 'resume_machine'):
- data.tSuspended = data.dmesg[lp]['end']
- data.tResumed = data.dmesg[lp]['end']
- data.tLow = 0
- if(data.dmesg[p]['end'] < 0):
- data.dmesg[p]['end'] = data.dmesg[p]['start']
+ phasedef = data.phasedef
+ terr, lp = '', 'suspend_prepare'
+ for p in sorted(phasedef, key=lambda k:phasedef[k]['order']):
+ if p not in data.dmesg:
+ if not terr:
+ print 'TEST FAILED: %s failed in %s phase' % (sysvals.suspendmode, lp)
+ terr = '%s failed in %s phase' % (sysvals.suspendmode, lp)
+ if data.tSuspended == 0:
+ data.tSuspended = data.dmesg[lp]['end']
+ if data.tResumed == 0:
+ data.tResumed = data.dmesg[lp]['end']
+ sysvals.vprint('WARNING: phase "%s" is missing!' % p)
+ lp = p
+ lp = data.sortedPhases()[0]
+ for p in data.sortedPhases():
+ if(p != lp and not ('machine' in p and 'machine' in lp)):
+ data.dmesg[lp]['end'] = data.dmesg[p]['start']
lp = p
+ if data.tSuspended == 0:
+ data.tSuspended = data.tKernRes
+ if data.tResumed == 0:
+ data.tResumed = data.tSuspended
# fill in any actions we've found
for name in actions:
@@ -3462,7 +3470,7 @@ def addCallgraphs(sv, hf, data):
hf.write('<section id="callgraphs" class="callgraph">\n')
# write out the ftrace data converted to html
num = 0
- for p in data.phases:
+ for p in data.sortedPhases():
if sv.cgphase and p != sv.cgphase:
continue
list = data.dmesg[p]['list']
@@ -3505,7 +3513,7 @@ def createHTMLSummarySimple(testruns, htmlfile, folder):
table {width:100%;border-collapse: collapse;}\n\
.summary {border:1px solid;}\n\
th {border: 1px solid black;background:#222;color:white;}\n\
- td {font: 16px "Times New Roman";text-align: center;}\n\
+ td {font: 14px "Times New Roman";text-align: center;}\n\
tr.head td {border: 1px solid black;background:#aaa;}\n\
tr.alt {background-color:#ddd;}\n\
tr.notice {color:red;}\n\
@@ -3521,7 +3529,7 @@ def createHTMLSummarySimple(testruns, htmlfile, folder):
iMin, iMed, iMax = [0, 0], [0, 0], [0, 0]
num = 0
lastmode = ''
- cnt = {'pass':0, 'fail':0, 'hang':0}
+ cnt = dict()
for data in sorted(testruns, key=lambda v:(v['mode'], v['host'], v['kernel'], v['time'])):
mode = data['mode']
if mode not in list:
@@ -3541,10 +3549,14 @@ def createHTMLSummarySimple(testruns, htmlfile, folder):
tVal = [float(data['suspend']), float(data['resume'])]
list[mode]['data'].append([data['host'], data['kernel'],
data['time'], tVal[0], tVal[1], data['url'], data['result'],
- data['issues']])
+ data['issues'], data['sus_worst'], data['sus_worsttime'],
+ data['res_worst'], data['res_worsttime']])
idx = len(list[mode]['data']) - 1
+ if data['result'] not in cnt:
+ cnt[data['result']] = 1
+ else:
+ cnt[data['result']] += 1
if data['result'] == 'pass':
- cnt['pass'] += 1
for i in range(2):
tMed[i].append(tVal[i])
tAvg[i] += tVal[i]
@@ -3555,10 +3567,6 @@ def createHTMLSummarySimple(testruns, htmlfile, folder):
iMax[i] = idx
tMax[i] = tVal[i]
num += 1
- elif data['result'] == 'hang':
- cnt['hang'] += 1
- elif data['result'] == 'fail':
- cnt['fail'] += 1
lastmode = mode
if lastmode and num > 0:
for i in range(2):
@@ -3585,11 +3593,14 @@ def createHTMLSummarySimple(testruns, htmlfile, folder):
html += '<table class="summary">\n<tr>\n' + th.format('#') +\
th.format('Mode') + th.format('Host') + th.format('Kernel') +\
th.format('Test Time') + th.format('Result') + th.format('Issues') +\
- th.format('Suspend') + th.format('Resume') + th.format('Detail') + '</tr>\n'
+ th.format('Suspend') + th.format('Resume') +\
+ th.format('Worst Suspend Device') + th.format('SD Time') +\
+ th.format('Worst Resume Device') + th.format('RD Time') +\
+ th.format('Detail') + '</tr>\n'
# export list into html
head = '<tr class="head"><td>{0}</td><td>{1}</td>'+\
- '<td colspan=8 class="sus">Suspend Avg={2} '+\
+ '<td colspan=12 class="sus">Suspend Avg={2} '+\
'<span class=minval><a href="#s{10}min">Min={3}</a></span> '+\
'<span class=medval><a href="#s{10}med">Med={4}</a></span> '+\
'<span class=maxval><a href="#s{10}max">Max={5}</a></span> '+\
@@ -3598,7 +3609,7 @@ def createHTMLSummarySimple(testruns, htmlfile, folder):
'<span class=medval><a href="#r{10}med">Med={8}</a></span> '+\
'<span class=maxval><a href="#r{10}max">Max={9}</a></span></td>'+\
'</tr>\n'
- headnone = '<tr class="head"><td>{0}</td><td>{1}</td><td colspan=8></td></tr>\n'
+ headnone = '<tr class="head"><td>{0}</td><td>{1}</td><td colspan=12></td></tr>\n'
for mode in list:
# header line for each suspend mode
num = 0
@@ -3641,6 +3652,10 @@ def createHTMLSummarySimple(testruns, htmlfile, folder):
html += td.format(d[7]) # issues
html += tdh.format('%.3f ms' % d[3], tHigh[0]) if d[3] else td.format('') # suspend
html += tdh.format('%.3f ms' % d[4], tHigh[1]) if d[4] else td.format('') # resume
+ html += td.format(d[8]) # sus_worst
+ html += td.format('%.3f ms' % d[9]) if d[9] else td.format('') # sus_worst time
+ html += td.format(d[10]) # res_worst
+ html += td.format('%.3f ms' % d[11]) if d[11] else td.format('') # res_worst time
html += tdlink.format(d[5]) if d[5] else td.format('') # url
html += '</tr>\n'
num += 1
@@ -3677,7 +3692,8 @@ def createHTML(testruns, testfail):
for data in testruns:
if data.kerror:
kerror = True
- data.normalizeTime(testruns[-1].tSuspended)
+ if(sysvals.suspendmode in ['freeze', 'standby']):
+ data.trimFreezeTime(testruns[-1].tSuspended)
# html function templates
html_error = '<div id="{1}" title="kernel error/warning" class="err" style="right:{0}%">{2}&rarr;</div>\n'
@@ -3721,8 +3737,8 @@ def createHTML(testruns, testfail):
sktime, rktime = data.getTimeValues()
if(tTotal == 0):
doError('No timeline data')
- if(data.tLow > 0):
- low_time = '%.0f'%(data.tLow*1000)
+ if(len(data.tLow) > 0):
+ low_time = '|'.join(data.tLow)
if sysvals.suspendmode == 'command':
run_time = '%.0f'%((data.end-data.start)*1000)
if sysvals.testcommand:
@@ -3743,7 +3759,7 @@ def createHTML(testruns, testfail):
if(len(testruns) > 1):
testdesc1 = testdesc2 = ordinal(data.testnumber+1)
testdesc2 += ' '
- if(data.tLow == 0):
+ if(len(data.tLow) == 0):
thtml = html_timetotal.format(suspend_time, \
resume_time, testdesc1, stitle, rtitle)
else:
@@ -3762,7 +3778,7 @@ def createHTML(testruns, testfail):
rtitle = 'time from firmware mode to return from kernel enter_state(%s) [kernel time only]' % sysvals.suspendmode
if(len(testruns) > 1):
testdesc = ordinal(data.testnumber+1)+' '+testdesc
- if(data.tLow == 0):
+ if(len(data.tLow) == 0):
thtml = html_timetotal.format(suspend_time, \
resume_time, testdesc, stitle, rtitle)
else:
@@ -3820,15 +3836,14 @@ def createHTML(testruns, testfail):
# draw the full timeline
devtl.createZoomBox(sysvals.suspendmode, len(testruns))
- phases = {'suspend':[],'resume':[]}
- for phase in data.dmesg:
- if 'resume' in phase:
- phases['resume'].append(phase)
- else:
- phases['suspend'].append(phase)
-
- # draw each test run chronologically
for data in testruns:
+ # draw each test run and block chronologically
+ phases = {'suspend':[],'resume':[]}
+ for phase in data.sortedPhases():
+ if data.dmesg[phase]['start'] >= data.tSuspended:
+ phases['resume'].append(phase)
+ else:
+ phases['suspend'].append(phase)
# now draw the actual timeline blocks
for dir in phases:
# draw suspend and resume blocks separately
@@ -3850,7 +3865,7 @@ def createHTML(testruns, testfail):
continue
width = '%f' % (((mTotal*100.0)-sysvals.srgap/2)/tTotal)
devtl.html += devtl.html_tblock.format(bname, left, width, devtl.scaleH)
- for b in sorted(phases[dir]):
+ for b in phases[dir]:
# draw the phase color background
phase = data.dmesg[b]
length = phase['end']-phase['start']
@@ -3865,7 +3880,7 @@ def createHTML(testruns, testfail):
id = '%d_%d' % (idx1, idx2)
right = '%f' % (((mMax-t)*100.0)/mTotal)
devtl.html += html_error.format(right, id, type)
- for b in sorted(phases[dir]):
+ for b in phases[dir]:
# draw the devices for this phase
phaselist = data.dmesg[b]['list']
for d in data.tdevlist[b]:
@@ -3942,19 +3957,17 @@ def createHTML(testruns, testfail):
# draw a legend which describes the phases by color
if sysvals.suspendmode != 'command':
- data = testruns[-1]
+ phasedef = testruns[-1].phasedef
devtl.html += '<div class="legend">\n'
- pdelta = 100.0/len(data.phases)
+ pdelta = 100.0/len(phasedef.keys())
pmargin = pdelta / 4.0
- for phase in data.phases:
- tmp = phase.split('_')
- id = tmp[0][0]
- if(len(tmp) > 1):
- id += tmp[1][0]
- order = '%.2f' % ((data.dmesg[phase]['order'] * pdelta) + pmargin)
+ for phase in sorted(phasedef, key=lambda k:phasedef[k]['order']):
+ id, p = '', phasedef[phase]
+ for word in phase.split('_'):
+ id += word[0]
+ order = '%.2f' % ((p['order'] * pdelta) + pmargin)
name = string.replace(phase, '_', ' &nbsp;')
- devtl.html += devtl.html_legend.format(order, \
- data.dmesg[phase]['color'], name, id)
+ devtl.html += devtl.html_legend.format(order, p['color'], name, id)
devtl.html += '</div>\n'
hf = open(sysvals.htmlfile, 'w')
@@ -3970,7 +3983,7 @@ def createHTML(testruns, testfail):
pscolor = 'linear-gradient(to top left, #ccc, #eee)'
hf.write(devtl.html_phaselet.format('pre_suspend_process', \
'0', '0', pscolor))
- for b in data.phases:
+ for b in data.sortedPhases():
phase = data.dmesg[b]
length = phase['end']-phase['start']
left = '%.3f' % (((phase['start']-t0)*100.0)/tTotal)
@@ -4542,16 +4555,12 @@ def setRuntimeSuspend(before=True):
def executeSuspend():
pm = ProcessMonitor()
tp = sysvals.tpath
- fwdata = []
+ testdata = []
+ battery = True if getBattery() else False
# run these commands to prepare the system for suspend
if sysvals.display:
- if sysvals.display > 0:
- print('TURN DISPLAY ON')
- call('xset -d :0.0 dpms force suspend', shell=True)
- call('xset -d :0.0 dpms force on', shell=True)
- else:
- print('TURN DISPLAY OFF')
- call('xset -d :0.0 dpms force suspend', shell=True)
+ print('SET DISPLAY TO %s' % sysvals.display.upper())
+ displayControl(sysvals.display)
time.sleep(1)
if sysvals.sync:
print('SYNCING FILESYSTEMS')
@@ -4579,6 +4588,7 @@ def executeSuspend():
print('SUSPEND START')
else:
print('SUSPEND START (press a key to resume)')
+ bat1 = getBattery() if battery else False
# set rtcwake
if(sysvals.rtcwake):
print('will issue an rtcwake in %d seconds' % sysvals.rtcwaketime)
@@ -4592,8 +4602,11 @@ def executeSuspend():
time.sleep(sysvals.predelay/1000.0)
sysvals.fsetVal('WAIT END', 'trace_marker')
# initiate suspend or command
+ tdata = {'error': ''}
if sysvals.testcommand != '':
- call(sysvals.testcommand+' 2>&1', shell=True);
+ res = call(sysvals.testcommand+' 2>&1', shell=True);
+ if res != 0:
+ tdata['error'] = 'cmd returned %d' % res
else:
mode = sysvals.suspendmode
if sysvals.memmode and os.path.exists(sysvals.mempowerfile):
@@ -4606,8 +4619,8 @@ def executeSuspend():
# execution will pause here
try:
pf.close()
- except:
- pass
+ except Exception as e:
+ tdata['error'] = str(e)
if(sysvals.rtcwake):
sysvals.rtcWakeAlarmOff()
# postdelay delay
@@ -4620,23 +4633,29 @@ def executeSuspend():
if(sysvals.usecallgraph or sysvals.usetraceevents):
sysvals.fsetVal('RESUME COMPLETE', 'trace_marker')
if(sysvals.suspendmode == 'mem' or sysvals.suspendmode == 'command'):
- fwdata.append(getFPDT(False))
+ tdata['fw'] = getFPDT(False)
+ bat2 = getBattery() if battery else False
+ if battery and bat1 and bat2:
+ tdata['bat'] = (bat1, bat2)
+ testdata.append(tdata)
# stop ftrace
if(sysvals.usecallgraph or sysvals.usetraceevents):
if sysvals.useprocmon:
pm.stop()
sysvals.fsetVal('0', 'tracing_on')
+ # grab a copy of the dmesg output
+ print('CAPTURING DMESG')
+ sysvals.getdmesg(testdata)
+ # grab a copy of the ftrace output
+ if(sysvals.usecallgraph or sysvals.usetraceevents):
print('CAPTURING TRACE')
- op = sysvals.writeDatafileHeader(sysvals.ftracefile, fwdata)
+ op = sysvals.writeDatafileHeader(sysvals.ftracefile, testdata)
fp = open(tp+'trace', 'r')
for line in fp:
op.write(line)
op.close()
sysvals.fsetVal('', 'trace')
devProps()
- # grab a copy of the dmesg output
- print('CAPTURING DMESG')
- sysvals.getdmesg(fwdata)
def readFile(file):
if os.path.islink(file):
@@ -4766,7 +4785,7 @@ def devProps(data=0):
alreadystamped = True
continue
# determine the trace data type (required for further parsing)
- m = re.match(sysvals.tracertypefmt, line)
+ m = re.match(tp.tracertypefmt, line)
if(m):
tp.setTracerType(m.group('t'))
continue
@@ -4994,8 +5013,9 @@ def dmidecode(mempath, fatal=False):
return out
def getBattery():
- p = '/sys/class/power_supply'
- bat = dict()
+ p, charge, bat = '/sys/class/power_supply', 0, {}
+ if not os.path.exists(p):
+ return False
for d in os.listdir(p):
type = sysvals.getVal(os.path.join(p, d, 'type')).strip().lower()
if type != 'battery':
@@ -5003,15 +5023,42 @@ def getBattery():
for v in ['status', 'energy_now', 'capacity_now']:
bat[v] = sysvals.getVal(os.path.join(p, d, v)).strip().lower()
break
- ac = True
- if 'status' in bat and 'discharging' in bat['status']:
- ac = False
- charge = 0
+ if 'status' not in bat:
+ return False
+ ac = False if 'discharging' in bat['status'] else True
for v in ['energy_now', 'capacity_now']:
if v in bat and bat[v]:
charge = int(bat[v])
return (ac, charge)
+def displayControl(cmd):
+ xset, ret = 'xset -d :0.0 {0}', 0
+ if sysvals.sudouser:
+ xset = 'sudo -u %s %s' % (sysvals.sudouser, xset)
+ if cmd == 'init':
+ ret = call(xset.format('dpms 0 0 0'), shell=True)
+ ret = call(xset.format('s off'), shell=True)
+ elif cmd == 'reset':
+ ret = call(xset.format('s reset'), shell=True)
+ elif cmd in ['on', 'off', 'standby', 'suspend']:
+ b4 = displayControl('stat')
+ ret = call(xset.format('dpms force %s' % cmd), shell=True)
+ curr = displayControl('stat')
+ sysvals.vprint('Display Switched: %s -> %s' % (b4, curr))
+ if curr != cmd:
+ sysvals.vprint('WARNING: Display failed to change to %s' % cmd)
+ elif cmd == 'stat':
+ fp = Popen(xset.format('q').split(' '), stdout=PIPE).stdout
+ ret = 'unknown'
+ for line in fp:
+ m = re.match('[\s]*Monitor is (?P<m>.*)', line)
+ if(m and len(m.group('m')) >= 2):
+ out = m.group('m').lower()
+ ret = out[3:] if out[0:2] == 'in' else out
+ break
+ fp.close()
+ return ret
+
# Function: getFPDT
# Description:
# Read the acpi bios tables and pull out FPDT, the firmware data
@@ -5149,7 +5196,7 @@ def getFPDT(output):
# Output:
# True if the test will work, False if not
def statusCheck(probecheck=False):
- status = True
+ status = ''
print('Checking this system (%s)...' % platform.node())
@@ -5160,7 +5207,7 @@ def statusCheck(probecheck=False):
print(' have root access: %s' % res)
if(res != 'YES'):
print(' Try running this script with sudo')
- return False
+ return 'missing root access'
# check sysfs is mounted
res = sysvals.colorText('NO (No features of this tool will work!)')
@@ -5168,7 +5215,7 @@ def statusCheck(probecheck=False):
res = 'YES'
print(' is sysfs mounted: %s' % res)
if(res != 'YES'):
- return False
+ return 'sysfs is missing'
# check target mode is a valid mode
if sysvals.suspendmode != 'command':
@@ -5177,7 +5224,7 @@ def statusCheck(probecheck=False):
if(sysvals.suspendmode in modes):
res = 'YES'
else:
- status = False
+ status = '%s mode is not supported' % sysvals.suspendmode
print(' is "%s" a valid power mode: %s' % (sysvals.suspendmode, res))
if(res == 'NO'):
print(' valid power modes are: %s' % modes)
@@ -5189,7 +5236,7 @@ def statusCheck(probecheck=False):
if(ftgood):
res = 'YES'
elif(sysvals.usecallgraph):
- status = False
+ status = 'ftrace is not properly supported'
print(' is ftrace supported: %s' % res)
# check if kprobes are available
@@ -5217,7 +5264,7 @@ def statusCheck(probecheck=False):
if(sysvals.rtcpath != ''):
res = 'YES'
elif(sysvals.rtcwake):
- status = False
+ status = 'rtcwake is not properly supported'
print(' is rtcwake supported: %s' % res)
if not probecheck:
@@ -5245,7 +5292,7 @@ def doError(msg, help=False):
printHelp()
print('ERROR: %s\n') % msg
sysvals.outputResult({'error':msg})
- sys.exit()
+ sys.exit(1)
# Function: getArgInt
# Description:
@@ -5301,11 +5348,16 @@ def processData(live=False):
appendIncompleteTraceLog(testruns)
sysvals.vprint('Command:\n %s' % sysvals.cmdline)
for data in testruns:
+ if data.battery:
+ a1, c1, a2, c2 = data.battery
+ s = 'Battery:\n Before - AC: %s, Charge: %d\n After - AC: %s, Charge: %d' % \
+ (a1, int(c1), a2, int(c2))
+ sysvals.vprint(s)
data.printDetails()
if sysvals.cgdump:
for data in testruns:
data.debugPrint()
- sys.exit()
+ sys.exit(0)
if len(testruns) < 1:
return (testruns, {'error': 'timeline generation failed'})
sysvals.vprint('Creating the html timeline (%s)...' % sysvals.htmlfile)
@@ -5335,6 +5387,7 @@ def rerunTest():
elif not os.access(sysvals.htmlfile, os.W_OK):
doError('missing permission to write to %s' % sysvals.htmlfile)
testruns, stamp = processData(False)
+ sysvals.logmsg = ''
return stamp
# Function: runTest
@@ -5349,13 +5402,16 @@ def runTest(n=0):
executeSuspend()
sysvals.cleanupFtrace()
if sysvals.skiphtml:
- sysvals.sudouser(sysvals.testdir)
+ sysvals.sudoUserchown(sysvals.testdir)
return
testruns, stamp = processData(True)
for data in testruns:
del data
- sysvals.sudouser(sysvals.testdir)
+ sysvals.sudoUserchown(sysvals.testdir)
sysvals.outputResult(stamp, n)
+ if 'error' in stamp:
+ return 2
+ return 0
def find_in_html(html, start, end, firstonly=True):
n, out = 0, []
@@ -5380,14 +5436,86 @@ def find_in_html(html, start, end, firstonly=True):
return ''
return out
+def data_from_html(file, outpath, devlist=False):
+ html = open(file, 'r').read()
+ suspend = find_in_html(html, 'Kernel Suspend', 'ms')
+ resume = find_in_html(html, 'Kernel Resume', 'ms')
+ line = find_in_html(html, '<div class="stamp">', '</div>')
+ stmp = line.split()
+ if not suspend or not resume or len(stmp) != 8:
+ return False
+ try:
+ dt = datetime.strptime(' '.join(stmp[3:]), '%B %d %Y, %I:%M:%S %p')
+ except:
+ return False
+ tstr = dt.strftime('%Y/%m/%d %H:%M:%S')
+ error = find_in_html(html, '<table class="testfail"><tr><td>', '</td>')
+ if error:
+ m = re.match('[a-z]* failed in (?P<p>[a-z0-9_]*) phase', error)
+ if m:
+ result = 'fail in %s' % m.group('p')
+ else:
+ result = 'fail'
+ else:
+ result = 'pass'
+ ilist = []
+ e = find_in_html(html, 'class="err"[\w=":;\.%\- ]*>', '&rarr;</div>', False)
+ for i in list(set(e)):
+ ilist.append('%sx%d' % (i, e.count(i)) if e.count(i) > 1 else i)
+ low = find_in_html(html, 'freeze time: <b>', ' ms</b>')
+ if low and '|' in low:
+ ilist.append('FREEZEx%d' % len(low.split('|')))
+ devices = dict()
+ for line in html.split('\n'):
+ m = re.match(' *<div id=\"[a,0-9]*\" *title=\"(?P<title>.*)\" class=\"thread.*', line)
+ if not m or 'thread kth' in line or 'thread sec' in line:
+ continue
+ m = re.match('(?P<n>.*) \((?P<t>[0-9,\.]*) ms\) (?P<p>.*)', m.group('title'))
+ if not m:
+ continue
+ name, time, phase = m.group('n'), m.group('t'), m.group('p')
+ if ' async' in name or ' sync' in name:
+ name = ' '.join(name.split(' ')[:-1])
+ d = phase.split('_')[0]
+ if d not in devices:
+ devices[d] = dict()
+ if name not in devices[d]:
+ devices[d][name] = 0.0
+ devices[d][name] += float(time)
+ worst = {'suspend': {'name':'', 'time': 0.0},
+ 'resume': {'name':'', 'time': 0.0}}
+ for d in devices:
+ if d not in worst:
+ worst[d] = dict()
+ dev = devices[d]
+ if len(dev.keys()) > 0:
+ n = sorted(dev, key=dev.get, reverse=True)[0]
+ worst[d]['name'], worst[d]['time'] = n, dev[n]
+ data = {
+ 'mode': stmp[2],
+ 'host': stmp[0],
+ 'kernel': stmp[1],
+ 'time': tstr,
+ 'result': result,
+ 'issues': ' '.join(ilist),
+ 'suspend': suspend,
+ 'resume': resume,
+ 'sus_worst': worst['suspend']['name'],
+ 'sus_worsttime': worst['suspend']['time'],
+ 'res_worst': worst['resume']['name'],
+ 'res_worsttime': worst['resume']['time'],
+ 'url': os.path.relpath(file, outpath),
+ }
+ if devlist:
+ data['devlist'] = devices
+ return data
+
# Function: runSummary
# Description:
# create a summary of tests in a sub-directory
def runSummary(subdir, local=True, genhtml=False):
inpath = os.path.abspath(subdir)
- outpath = inpath
- if local:
- outpath = os.path.abspath('.')
+ outpath = os.path.abspath('.') if local else inpath
print('Generating a summary of folder "%s"' % inpath)
if genhtml:
for dirname, dirnames, filenames in os.walk(subdir):
@@ -5409,36 +5537,9 @@ def runSummary(subdir, local=True, genhtml=False):
for filename in filenames:
if(not re.match('.*.html', filename)):
continue
- file = os.path.join(dirname, filename)
- html = open(file, 'r').read()
- suspend = find_in_html(html, 'Kernel Suspend', 'ms')
- resume = find_in_html(html, 'Kernel Resume', 'ms')
- line = find_in_html(html, '<div class="stamp">', '</div>')
- stmp = line.split()
- if not suspend or not resume or len(stmp) != 8:
+ data = data_from_html(os.path.join(dirname, filename), outpath)
+ if(not data):
continue
- try:
- dt = datetime.strptime(' '.join(stmp[3:]), '%B %d %Y, %I:%M:%S %p')
- except:
- continue
- tstr = dt.strftime('%Y/%m/%d %H:%M:%S')
- error = find_in_html(html, '<table class="testfail"><tr><td>', '</td>')
- result = 'fail' if error else 'pass'
- ilist = []
- e = find_in_html(html, 'class="err"[\w=":;\.%\- ]*>', '&rarr;</div>', False)
- for i in list(set(e)):
- ilist.append('%sx%d' % (i, e.count(i)) if e.count(i) > 1 else i)
- data = {
- 'mode': stmp[2],
- 'host': stmp[0],
- 'kernel': stmp[1],
- 'time': tstr,
- 'result': result,
- 'issues': ','.join(ilist),
- 'suspend': suspend,
- 'resume': resume,
- 'url': os.path.relpath(file, outpath),
- }
testruns.append(data)
outfile = os.path.join(outpath, 'summary.html')
print('Summary file: %s' % outfile)
@@ -5499,13 +5600,10 @@ def configFromFile(file):
else:
doError('invalid value --> (%s: %s), use "enable/disable"' % (option, value), True)
elif(option == 'display'):
- if value in switchvalues:
- if value in switchoff:
- sysvals.display = -1
- else:
- sysvals.display = 1
- else:
- doError('invalid value --> (%s: %s), use "on/off"' % (option, value), True)
+ disopt = ['on', 'off', 'standby', 'suspend']
+ if value not in disopt:
+ doError('invalid value --> (%s: %s), use %s' % (option, value, disopt), True)
+ sysvals.display = value
elif(option == 'gzip'):
sysvals.gzip = checkArgBool(option, value)
elif(option == 'cgfilter'):
@@ -5521,9 +5619,9 @@ def configFromFile(file):
sysvals.cgtest = getArgInt('cgtest', value, 0, 1, False)
elif(option == 'cgphase'):
d = Data(0)
- if value not in d.phases:
+ if value not in d.sortedPhases():
doError('invalid phase --> (%s: %s), valid phases are %s'\
- % (option, value, d.phases), True)
+ % (option, value, d.sortedPhases()), True)
sysvals.cgphase = value
elif(option == 'fadd'):
file = sysvals.configFile(value)
@@ -5697,7 +5795,7 @@ def printHelp():
print(' [testprep]')
print(' -sync Sync the filesystems before starting the test')
print(' -rs on/off Enable/disable runtime suspend for all devices, restore all after test')
- print(' -display on/off Turn the display on or off for the test')
+ print(' -display m Change the display mode to m for the test (on/off/standby/suspend)')
print(' [advanced]')
print(' -gzip Gzip the trace and dmesg logs to save space')
print(' -cmd {s} Run the timeline over a custom command, e.g. "sync -d"')
@@ -5729,6 +5827,7 @@ def printHelp():
print(' -status Test to see if the system is enabled to run this tool')
print(' -fpdt Print out the contents of the ACPI Firmware Performance Data Table')
print(' -battery Print out battery info (if available)')
+ print(' -x<mode> Test xset by toggling the given mode (on/off/standby/suspend)')
print(' -sysinfo Print out system info extracted from BIOS')
print(' -devinfo Print out the pm settings of all devices which support runtime suspend')
print(' -flist Print the list of functions currently being captured in ftrace')
@@ -5745,7 +5844,9 @@ def printHelp():
if __name__ == '__main__':
genhtml = False
cmd = ''
- simplecmds = ['-sysinfo', '-modes', '-fpdt', '-flist', '-flistall', '-devinfo', '-status', '-battery']
+ simplecmds = ['-sysinfo', '-modes', '-fpdt', '-flist', '-flistall',
+ '-devinfo', '-status', '-battery', '-xon', '-xoff', '-xstandby',
+ '-xsuspend', '-xinit', '-xreset', '-xstat']
if '-f' in sys.argv:
sysvals.cgskip = sysvals.configFile('cgskip.txt')
# loop through the command line arguments
@@ -5763,10 +5864,10 @@ if __name__ == '__main__':
cmd = arg[1:]
elif(arg == '-h'):
printHelp()
- sys.exit()
+ sys.exit(0)
elif(arg == '-v'):
print("Version %s" % sysvals.version)
- sys.exit()
+ sys.exit(0)
elif(arg == '-x2'):
sysvals.execcount = 2
elif(arg == '-x2delay'):
@@ -5785,6 +5886,10 @@ if __name__ == '__main__':
genhtml = True
elif(arg == '-addlogs'):
sysvals.dmesglog = sysvals.ftracelog = True
+ elif(arg == '-addlogdmesg'):
+ sysvals.dmesglog = True
+ elif(arg == '-addlogftrace'):
+ sysvals.ftracelog = True
elif(arg == '-verbose'):
sysvals.verbose = True
elif(arg == '-proc'):
@@ -5811,14 +5916,11 @@ if __name__ == '__main__':
try:
val = args.next()
except:
- doError('-display requires "on" or "off"', True)
- if val.lower() in switchvalues:
- if val.lower() in switchoff:
- sysvals.display = -1
- else:
- sysvals.display = 1
- else:
- doError('invalid option: %s, use "on/off"' % val, True)
+ doError('-display requires an mode value', True)
+ disopt = ['on', 'off', 'standby', 'suspend']
+ if val.lower() not in disopt:
+ doError('valid display mode values are %s' % disopt, True)
+ sysvals.display = val.lower()
elif(arg == '-maxdepth'):
sysvals.max_graph_depth = getArgInt('-maxdepth', args, 0, 1000)
elif(arg == '-rtcwake'):
@@ -5847,9 +5949,9 @@ if __name__ == '__main__':
except:
doError('No phase name supplied', True)
d = Data(0)
- if val not in d.phases:
+ if val not in d.phasedef:
doError('invalid phase --> (%s: %s), valid phases are %s'\
- % (arg, val, d.phases), True)
+ % (arg, val, d.phasedef.keys()), True)
sysvals.cgphase = val
elif(arg == '-cgfilter'):
try:
@@ -5951,6 +6053,7 @@ if __name__ == '__main__':
except:
doError('No result file supplied', True)
sysvals.result = val
+ sysvals.signalHandlerInit()
else:
doError('Invalid argument: '+arg, True)
@@ -5975,12 +6078,20 @@ if __name__ == '__main__':
# just run a utility command and exit
if(cmd != ''):
+ ret = 0
if(cmd == 'status'):
- statusCheck(True)
+ if not statusCheck(True):
+ ret = 1
elif(cmd == 'fpdt'):
- getFPDT(True)
+ if not getFPDT(True):
+ ret = 1
elif(cmd == 'battery'):
- print 'AC Connect: %s\nCharge: %d' % getBattery()
+ out = getBattery()
+ if out:
+ print 'AC Connect : %s\nBattery Charge: %d' % out
+ else:
+ print 'no battery found'
+ ret = 1
elif(cmd == 'sysinfo'):
sysvals.printSystemInfo(True)
elif(cmd == 'devinfo'):
@@ -5993,17 +6104,23 @@ if __name__ == '__main__':
sysvals.getFtraceFilterFunctions(False)
elif(cmd == 'summary'):
runSummary(sysvals.outdir, True, genhtml)
- sys.exit()
+ elif(cmd in ['xon', 'xoff', 'xstandby', 'xsuspend', 'xinit', 'xreset']):
+ sysvals.verbose = True
+ ret = displayControl(cmd[1:])
+ elif(cmd == 'xstat'):
+ print 'Display Status: %s' % displayControl('stat').upper()
+ sys.exit(ret)
# if instructed, re-analyze existing data files
if(sysvals.notestrun):
stamp = rerunTest()
sysvals.outputResult(stamp)
- sys.exit()
+ sys.exit(0)
# verify that we can run a test
- if(not statusCheck()):
- doError('Check FAILED, aborting the test run!')
+ error = statusCheck()
+ if(error):
+ doError(error)
# extract mem modes and convert
mode = sysvals.suspendmode
@@ -6025,8 +6142,8 @@ if __name__ == '__main__':
setRuntimeSuspend(True)
if sysvals.display:
- call('xset -d :0.0 dpms 0 0 0', shell=True)
- call('xset -d :0.0 s off', shell=True)
+ displayControl('init')
+ ret = 0
if sysvals.multitest['run']:
# run multiple tests in a separate subdirectory
if not sysvals.outdir:
@@ -6041,17 +6158,18 @@ if __name__ == '__main__':
print('TEST (%d/%d) START' % (i+1, sysvals.multitest['count']))
fmt = 'suspend-%y%m%d-%H%M%S'
sysvals.testdir = os.path.join(sysvals.outdir, datetime.now().strftime(fmt))
- runTest(i+1)
+ ret = runTest(i+1)
print('TEST (%d/%d) COMPLETE' % (i+1, sysvals.multitest['count']))
sysvals.logmsg = ''
if not sysvals.skiphtml:
runSummary(sysvals.outdir, False, False)
- sysvals.sudouser(sysvals.outdir)
+ sysvals.sudoUserchown(sysvals.outdir)
else:
if sysvals.outdir:
sysvals.testdir = sysvals.outdir
# run the test in the current directory
- runTest()
+ ret = runTest()
if sysvals.display:
- call('xset -d :0.0 s reset', shell=True)
+ displayControl('reset')
setRuntimeSuspend(False)
+ sys.exit(ret)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 07:51:22 +0100