Merge branch 'next' into for-linus

19 files changed, 2380 insertions, 6 deletions

diff --git a/tools/testing/ktest/examples/README b/tools/testing/ktest/examples/README
new file mode 100644
index 000000000000..a12d295a09d8
--- /dev/null
+++ b/tools/testing/ktest/examples/README
@@ -0,0 +1,32 @@
+This directory contains example configs to use ktest for various tasks.
+The configs still need to be customized for your environment, but it
+is broken up by task which makes it easier to understand how to set up
+ktest.
+
+The configs are based off of real working configs but have been modified
+and commented to show more generic use cases that are more helpful for
+developers.
+
+crosstests.conf - this config shows an example of testing a git repo against
+    lots of different architectures. It only does build tests, but makes
+    it easy to compile test different archs. You can download the arch
+    cross compilers from:
+  http://kernel.org/pub/tools/crosstool/files/bin/x86_64/
+
+test.conf - A generic example of a config. This is based on an actual config
+     used to perform real testing.
+
+kvm.conf - A example of a config that is used to test a virtual guest running
+     on a host.
+
+snowball.conf - An example config that was used to demo ktest.pl against
+     a snowball ARM board.
+
+include/  -  The include directory holds default configs that can be
+    included into other configs. This is a real use example that shows how
+    to reuse configs for various machines or set ups. The files here
+    are included by other config files, where the other config files define
+    options and variables that will make the included config work for the
+    given environment.
+
+
diff --git a/tools/testing/ktest/examples/crosstests.conf b/tools/testing/ktest/examples/crosstests.conf
new file mode 100644
index 000000000000..46736604c26c
--- /dev/null
+++ b/tools/testing/ktest/examples/crosstests.conf
@@ -0,0 +1,260 @@
+#
+# Example config for cross compiling
+#
+# In this config, it is expected that the tool chains from:
+#
+#   http://kernel.org/pub/tools/crosstool/files/bin/x86_64/
+#
+# running on a x86_64 system have been downloaded and installed into:
+#
+#   /usr/local/
+#
+# such that the compiler binaries are something like:
+#
+#   /usr/local/gcc-4.5.2-nolibc/mips-linux/bin/mips-linux-gcc
+#
+# Some of the archs will use gcc-4.5.1 instead of gcc-4.5.2
+# this config uses variables to differentiate them.
+# 
+# Comments describe some of the options, but full descriptions of
+# options are described in the samples.conf file.
+
+# ${PWD} is defined by ktest.pl to be the directory that the user
+# was in when they executed ktest.pl. It may be better to hardcode the
+# path name here. THIS_DIR is the variable used through out the config file
+# in case you want to change it.
+
+THIS_DIR := ${PWD}
+
+# Update the BUILD_DIR option to the location of your git repo you want to test.
+BUILD_DIR = ${THIS_DIR}/linux.git
+
+# The build will go into this directory. It will be created when you run the test.
+OUTPUT_DIR = ${THIS_DIR}/cross-compile
+
+# The build will be compiled with -j8
+BUILD_OPTIONS = -j8
+
+# The test will not stop when it hits a failure.
+DIE_ON_FAILURE = 0
+
+# If you want to have ktest.pl store the failure somewhere, uncomment this option
+# and change the directory where ktest should store the failures.
+#STORE_FAILURES = ${THIS_DIR}/failures
+
+# The log file is stored in the OUTPUT_DIR called cross.log
+# If you enable this, you need to create the OUTPUT_DIR. It wont be created for you.
+LOG_FILE = ${OUTPUT_DIR}/cross.log
+
+# The log file will be cleared each time you run ktest.
+CLEAR_LOG = 1
+
+# As some archs do not build with the defconfig, they have been marked
+# to be ignored. If you want to test them anyway, change DO_FAILED to 1.
+# If a test that has been marked as DO_FAILED passes, then you should change
+# that test to be DO_DEFAULT
+
+DO_FAILED := 0
+DO_DEFAULT := 1
+
+# By setting both DO_FAILED and DO_DEFAULT to zero, you can pick a single
+# arch that you want to test. (uncomment RUN and chose your arch)
+#RUN := m32r
+
+# At the bottom of the config file exists a bisect test. You can update that
+# test and set DO_FAILED and DO_DEFAULT to zero, and uncomment this variable
+# to run the bisect on the arch.
+#RUN := bisect
+
+# By default all tests will be running gcc 4.5.2. Some tests are using 4.5.1
+# and they select that in the test.
+# Note: GCC_VER is declared as on option and not a variable ('=' instead of ':=')
+# This is important. A variable is used only in the config file and if it is set
+# it stays that way for the rest of the config file until it is change again.
+# Here we want GCC_VER to remain persistent and change for each test, as it is used in
+# the MAKE_CMD. By using '=' instead of ':=' we achieve our goal.
+
+GCC_VER = 4.5.2
+MAKE_CMD = PATH=/usr/local/gcc-${GCC_VER}-nolibc/${CROSS}/bin:$PATH CROSS_COMPILE=${CROSS}- make ARCH=${ARCH}
+
+# all tests are only doing builds.
+TEST_TYPE = build
+
+# If you want to add configs on top of the defconfig, you can add those configs into
+# the add-config file and uncomment this option. This is useful if you want to test
+# all cross compiles with PREEMPT set, or TRACING on, etc.
+#ADD_CONFIG = ${THIS_DIR}/add-config
+
+# All tests are using defconfig
+BUILD_TYPE = defconfig
+
+# The test names will have the arch and cross compiler used. This will be shown in
+# the results.
+TEST_NAME = ${ARCH} ${CROSS}
+
+# alpha
+TEST_START IF ${RUN} == alpha || ${DO_DEFAULT}
+# Notice that CROSS and ARCH are also options and not variables (again '=' instead
+# of ':='). This is because TEST_NAME and MAKE_CMD wil use them for each test.
+# Only options are available during runs. Variables are only present in parsing the
+# config file.
+CROSS = alpha-linux
+ARCH = alpha
+
+# arm
+TEST_START IF ${RUN} == arm || ${DO_DEFAULT}
+CROSS = arm-unknown-linux-gnueabi
+ARCH = arm
+
+# black fin
+TEST_START IF ${RUN} == bfin || ${DO_DEFAULT}
+CROSS = bfin-uclinux
+ARCH = blackfin
+BUILD_OPTIONS = -j8 vmlinux
+
+# cris - FAILS?
+TEST_START IF ${RUN} == cris || ${RUN} == cris64 || ${DO_FAILED}
+CROSS = cris-linux
+ARCH = cris
+
+# cris32 - not right arch?
+TEST_START IF ${RUN} == cris || ${RUN} == cris32 || ${DO_FAILED}
+CROSS = crisv32-linux
+ARCH = cris
+
+# ia64
+TEST_START IF ${RUN} == ia64 || ${DO_DEFAULT}
+CROSS = ia64-linux
+ARCH = ia64
+
+# frv
+TEST_START IF ${RUN} == frv || ${DO_FAILED}
+CROSS = frv-linux
+ARCH = frv
+GCC_VER = 4.5.1
+
+# h8300 - failed make defconfig??
+TEST_START IF ${RUN} == h8300 || ${DO_FAILED}
+CROSS = h8300-elf
+ARCH = h8300
+GCC_VER = 4.5.1
+
+# m68k fails with error?
+TEST_START IF ${RUN} == m68k || ${DO_DEFAULT}
+CROSS = m68k-linux
+ARCH = m68k
+
+# mips64
+TEST_START IF ${RUN} == mips || ${RUN} == mips64 || ${DO_DEFAULT}
+CROSS = mips64-linux
+ARCH = mips
+
+# mips32
+TEST_START IF ${RUN} == mips || ${RUN} == mips32 || ${DO_DEFAULT}
+CROSS = mips-linux
+ARCH = mips
+
+# m32r
+TEST_START IF ${RUN} == m32r || ${DO_FAILED}
+CROSS = m32r-linux
+ARCH = m32r
+GCC_VER = 4.5.1
+BUILD_OPTIONS = -j8 vmlinux
+
+# parisc64 failed?
+TEST_START IF ${RUN} == hppa || ${RUN} == hppa64 || ${DO_FAILED}
+CROSS = hppa64-linux
+ARCH = parisc
+
+# parisc
+TEST_START IF ${RUN} == hppa || ${RUN} == hppa32 || ${DO_FAILED}
+CROSS = hppa-linux
+ARCH = parisc
+
+# ppc
+TEST_START IF ${RUN} == ppc || ${RUN} == ppc32 || ${DO_DEFAULT}
+CROSS = powerpc-linux
+ARCH = powerpc
+
+# ppc64
+TEST_START IF ${RUN} == ppc || ${RUN} == ppc64 || ${DO_DEFAULT}
+CROSS = powerpc64-linux
+ARCH = powerpc
+
+# s390
+TEST_START IF ${RUN} == s390 || ${DO_DEFAULT}
+CROSS = s390x-linux
+ARCH = s390
+
+# sh
+TEST_START IF ${RUN} == sh || ${DO_DEFAULT}
+CROSS = sh4-linux
+ARCH = sh
+
+# sparc64
+TEST_START IF ${RUN} == sparc || ${RUN} == sparc64 || ${DO_DEFAULT}
+CROSS = sparc64-linux
+ARCH = sparc64
+
+# sparc
+TEST_START IF ${RUN} == sparc || ${RUN} == sparc32 || ${DO_DEFAULT}
+CROSS = sparc-linux
+ARCH = sparc
+
+# xtensa failed
+TEST_START IF ${RUN} == xtensa || ${DO_FAILED}
+CROSS = xtensa-linux
+ARCH = xtensa
+
+# UML
+TEST_START IF ${RUN} == uml || ${DO_DEFAULT}
+MAKE_CMD = make ARCH=um SUBARCH=x86_64
+ARCH = uml
+CROSS =
+
+TEST_START IF ${RUN} == x86 || ${RUN} == i386 || ${DO_DEFAULT}
+MAKE_CMD = make ARCH=i386
+ARCH = i386
+CROSS = 
+
+TEST_START IF ${RUN} == x86 || ${RUN} == x86_64 || ${DO_DEFAULT}
+MAKE_CMD = make ARCH=x86_64
+ARCH = x86_64
+CROSS = 
+
+#################################
+
+# This is a bisect if needed. You need to give it a MIN_CONFIG that
+# will be the config file it uses. Basically, just copy the created defconfig
+# for the arch someplace and point MIN_CONFIG to it.
+TEST_START IF ${RUN} == bisect
+MIN_CONFIG = ${THIS_DIR}/min-config
+CROSS = s390x-linux
+ARCH = s390
+TEST_TYPE = bisect
+BISECT_TYPE = build
+BISECT_GOOD = v3.1
+BISECT_BAD = v3.2
+CHECKOUT = v3.2
+
+#################################
+
+# These defaults are needed to keep ktest.pl from complaining. They are
+# ignored because the test does not go pass the build. No install or
+# booting of the target images.
+
+DEFAULTS
+MACHINE = crosstest
+SSH_USER = root
+BUILD_TARGET = cross
+TARGET_IMAGE = image
+POWER_CYCLE = cycle
+CONSOLE = console
+LOCALVERSION = version
+GRUB_MENU = grub
+
+REBOOT_ON_ERROR = 0
+POWEROFF_ON_ERROR = 0
+POWEROFF_ON_SUCCESS = 0
+REBOOT_ON_SUCCESS = 0
+
diff --git a/tools/testing/ktest/examples/include/bisect.conf b/tools/testing/ktest/examples/include/bisect.conf
new file mode 100644
index 000000000000..009bea65bfb6
--- /dev/null
+++ b/tools/testing/ktest/examples/include/bisect.conf
@@ -0,0 +1,90 @@
+#
+# This example shows the bisect tests (git bisect and config bisect)
+#
+
+
+# The config that includes this file may define a RUN_TEST
+# variable that will tell this config what test to run.
+# (what to set the TEST option to).
+#
+DEFAULTS IF NOT DEFINED RUN_TEST
+# Requires that hackbench is in the PATH
+RUN_TEST := ${SSH} hackbench 50
+
+
+# Set TEST to 'bisect' to do a normal git bisect. You need
+# to modify the options below to make it bisect the exact
+# commits you are interested in.
+#
+TEST_START IF ${TEST} == bisect
+TEST_TYPE = bisect
+# You must set the commit that was considered good (git bisect good)
+BISECT_GOOD = v3.3
+# You must set the commit that was considered bad (git bisect bad)
+BISECT_BAD = HEAD
+# It's best to specify the branch to checkout before starting the bisect.
+CHECKOUT = origin/master
+# This can be build, boot, or test. Here we are doing a bisect
+# that requires to run a test to know if the bisect was good or bad.
+# The test should exit with 0 on good, non-zero for bad. But see
+# the BISECT_RET_* options in samples.conf to override this.
+BISECT_TYPE = test
+TEST = ${RUN_TEST}
+# It is usually a good idea to confirm that the GOOD and the BAD
+# commits are truly good and bad respectively. Having BISECT_CHECK
+# set to 1 will check both that the good commit works and the bad
+# commit fails. If you only want to check one or the other,
+# set BISECT_CHECK to 'good' or to 'bad'.
+BISECT_CHECK = 1
+#BISECT_CHECK = good
+#BISECT_CHECK = bad
+
+# Usually it's a good idea to specify the exact config you
+# want to use throughout the entire bisect. Here we placed
+# it in the directory we called ktest.pl from and named it
+# 'config-bisect'.
+MIN_CONFIG = ${THIS_DIR}/config-bisect
+# By default, if we are doing a BISECT_TYPE = test run but the
+# build or boot fails, ktest.pl will do a 'git bisect skip'.
+# Uncomment the below option to make ktest stop testing on such
+# an error.
+#BISECT_SKIP = 0
+# Now if you had BISECT_SKIP = 0 and the test fails, you can
+# examine what happened and then do 'git bisect log > /tmp/replay'
+# Set BISECT_REPLAY to /tmp/replay and ktest.pl will run the
+# 'git bisect replay /tmp/replay' before continuing the bisect test.
+#BISECT_REPLAY = /tmp/replay
+# If you used BISECT_REPLAY after the bisect test failed, you may
+# not want to continue the bisect on that commit that failed.
+# By setting BISECT_START to a new commit. ktest.pl will checkout
+# that commit after it has performed the 'git bisect replay' but
+# before it continues running the bisect test.
+#BISECT_START = 2545eb6198e7e1ec50daa0cfc64a4cdfecf24ec9
+
+# Now if you don't trust ktest.pl to make the decisions for you, then
+# set BISECT_MANUAL to 1. This will cause ktest.pl not to decide
+# if the commit was good or bad. Instead, it will ask you to tell
+# it if the current commit was good. In the mean time, you could
+# take the result, load it on any machine you want. Run several tests,
+# or whatever you feel like. Then, when you are happy, you can tell
+# ktest if you think it was good or not and ktest.pl will continue
+# the git bisect. You can even change what commit it is currently at.
+#BISECT_MANUAL = 1
+
+
+# One of the unique tests that ktest does is the config bisect.
+# Currently (which hopefully will be fixed soon), the bad config
+# must be a superset of the good config. This is because it only
+# searches for a config that causes the target to fail. If the
+# good config is not a subset of the bad config, or if the target
+# fails because of a lack of a config, then it will not find
+# the config for you.
+TEST_START IF ${TEST} == config-bisect
+TEST_TYPE = config_bisect
+# set to build, boot, test
+CONFIG_BISECT_TYPE = boot
+# Set the config that is considered bad.
+CONFIG_BISECT = ${THIS_DIR}/config-bad
+# This config is optional. By default it uses the
+# MIN_CONFIG as the good config.
+CONFIG_BISECT_GOOD = ${THIS_DIR}/config-good
diff --git a/tools/testing/ktest/examples/include/defaults.conf b/tools/testing/ktest/examples/include/defaults.conf
new file mode 100644
index 000000000000..323a552ce642
--- /dev/null
+++ b/tools/testing/ktest/examples/include/defaults.conf
@@ -0,0 +1,157 @@
+# This file holds defaults for most the tests. It defines the options that
+# are most common to tests that are likely to be shared.
+#
+# Note, after including this file, a config file may override any option
+# with a DEFAULTS OVERRIDE section.
+#
+
+# For those cases that use the same machine to boot a 64 bit
+# and a 32 bit version. The MACHINE is the DNS name to get to the
+# box (usually different if it was 64 bit or 32 bit) but the
+# BOX here is defined as a variable that will be the name of the box
+# itself. It is useful for calling scripts that will power cycle
+# the box, as only one script needs to be created to power cycle
+# even though the box itself has multiple operating systems on it.
+# By default, BOX and MACHINE are the same.
+
+DEFAULTS IF NOT DEFINED BOX
+BOX := ${MACHINE}
+
+
+# Consider each box as 64 bit box, unless the config including this file
+# has defined BITS = 32
+
+DEFAULTS IF NOT DEFINED BITS
+BITS := 64
+
+
+DEFAULTS
+
+# THIS_DIR is used through out the configs and defaults to ${PWD} which
+# is the directory that ktest.pl was called from.
+
+THIS_DIR := ${PWD}
+
+
+# to orginize your configs, having each machine save their configs
+# into a separate directly is useful.
+CONFIG_DIR := ${THIS_DIR}/configs/${MACHINE}
+
+# Reset the log before running each test.
+CLEAR_LOG = 1
+
+# As installing kernels usually requires root privilege, default the
+# user on the target as root. It is also required that the target
+# allows ssh to root from the host without asking for a password.
+
+SSH_USER = root
+
+# For accesing the machine, we will ssh to root@machine.
+SSH := ssh ${SSH_USER}@${MACHINE}
+
+# Update this. The default here is ktest will ssh to the target box
+# and run a script called 'run-test' located on that box.
+TEST = ${SSH} run-test
+
+# Point build dir to the git repo you use
+BUILD_DIR = ${THIS_DIR}/linux.git
+
+# Each machine will have its own output build directory.
+OUTPUT_DIR = ${THIS_DIR}/build/${MACHINE}
+
+# Yes this config is focused on x86 (but ktest works for other archs too)
+BUILD_TARGET = arch/x86/boot/bzImage
+TARGET_IMAGE = /boot/vmlinuz-test
+
+# have directory for the scripts to reboot and power cycle the boxes
+SCRIPTS_DIR := ${THIS_DIR}/scripts
+
+# You can have each box/machine have a script to power cycle it.
+# Name your script <box>-cycle.
+POWER_CYCLE = ${SCRIPTS_DIR}/${BOX}-cycle
+
+# This script is used to power off the box.
+POWER_OFF = ${SCRIPTS_DIR}/${BOX}-poweroff
+
+# Keep your test kernels separate from your other kernels.
+LOCALVERSION = -test
+
+# The /boot/grub/menu.lst is searched for the line:
+#  title Test Kernel
+# and ktest will use that kernel to reboot into.
+# For grub2 or other boot loaders, you need to set BOOT_TYPE
+# to 'script' and define other ways to load the kernel.
+# See snowball.conf example.
+#
+GRUB_MENU = Test Kernel
+
+# The kernel build will use this option.
+BUILD_OPTIONS = -j8
+
+# Keeping the log file with the output dir is convenient.
+LOG_FILE = ${OUTPUT_DIR}/${MACHINE}.log
+
+# Each box should have their own minum configuration
+# See min-config.conf
+MIN_CONFIG = ${CONFIG_DIR}/config-min
+
+# For things like randconfigs, there may be configs you find that
+# are already broken, or there may be some configs that you always
+# want set. Uncomment ADD_CONFIG and point it to the make config files
+# that set the configs you want to keep on (or off) in your build.
+# ADD_CONFIG is usually something to add configs to all machines,
+# where as, MIN_CONFIG is specific per machine.
+#ADD_CONFIG = ${THIS_DIR}/config-broken ${THIS_DIR}/config-general
+
+# To speed up reboots for bisects and patchcheck, instead of
+# waiting 60 seconds for the console to be idle, if this line is
+# seen in the console output, ktest will know the good kernel has
+# finished rebooting and it will be able to continue the tests.
+REBOOT_SUCCESS_LINE = ${MACHINE} login:
+
+# The following is different ways to end the test.
+# by setting the variable REBOOT to: none, error, fail or
+# something else, ktest will power cycle or reboot the target box
+# at the end of the tests.
+#
+# REBOOT := none
+#   Don't do anything at the end of the test.
+#
+# REBOOT := error
+#   Reboot the box if ktest detects an error
+#
+# REBOOT := fail
+#   Do not stop on failure, and after all tests are complete
+#   power off the box (for both success and error)
+#   This is good to run over a weekend and you don't want to waste
+#   electricity.
+#
+
+DEFAULTS IF ${REBOOT} == none
+REBOOT_ON_SUCCESS = 0
+REBOOT_ON_ERROR = 0
+POWEROFF_ON_ERROR = 0
+POWEROFF_ON_SUCCESS = 0
+
+DEFAULTS ELSE IF ${REBOOT} == error
+REBOOT_ON_SUCCESS = 0
+REBOOT_ON_ERROR = 1
+POWEROFF_ON_ERROR = 0
+POWEROFF_ON_SUCCESS = 0
+
+DEFAULTS ELSE IF ${REBOOT} == fail
+REBOOT_ON_SUCCESS = 0
+POWEROFF_ON_ERROR = 1
+POWEROFF_ON_SUCCESS = 1
+POWEROFF_AFTER_HALT = 120
+DIE_ON_FAILURE = 0
+
+# Store the failure information into this directory
+# such as the .config, dmesg, and build log.
+STORE_FAILURES = ${THIS_DIR}/failures
+
+DEFAULTS ELSE
+REBOOT_ON_SUCCESS = 1
+REBOOT_ON_ERROR = 1
+POWEROFF_ON_ERROR = 0
+POWEROFF_ON_SUCCESS = 0
diff --git a/tools/testing/ktest/examples/include/min-config.conf b/tools/testing/ktest/examples/include/min-config.conf
new file mode 100644
index 000000000000..c703cc46d151
--- /dev/null
+++ b/tools/testing/ktest/examples/include/min-config.conf
@@ -0,0 +1,60 @@
+#
+# This file has some examples for creating a MIN_CONFIG.
+# (A .config file that is the minimum for a machine to boot, or
+#  to boot and make a network connection.)
+#
+# A MIN_CONFIG is very useful as it is the minimum configuration
+# needed to boot a given machine. You can debug someone else's
+# .config by only setting the configs in your MIN_CONFIG. The closer
+# your MIN_CONFIG is to the true minimum set of configs needed to
+# boot your machine, the closer the config you test with will be
+# to the users config that had the failure.
+#
+# The make_min_config test allows you to create a MIN_CONFIG that
+# is truly the minimum set of configs needed to boot a box.
+#
+# In this example, the final config will reside in
+# ${CONFIG_DIR}/config-new-min and ${CONFIG_DIR}/config-new-min-net.
+# Just move one to the location you have set for MIN_CONFIG.
+#
+# The first test creates a MIN_CONFIG that will be the minimum
+# configuration to boot ${MACHINE} and be able to ssh to it.
+#
+# The second test creates a MIN_CONFIG that will only boot
+# the target and most likely will not let you ssh to it. (Notice
+# how the second test uses the first test's result to continue with.
+# This is because the second test config is a subset of the first).
+#
+# The ${CONFIG_DIR}/config-skip (and -net) will hold the configs
+# that ktest.pl found would not boot the target without them set.
+# The config-new-min holds configs that ktest.pl could not test
+# directly because another config that was needed to boot the box
+# selected them. Sometimes it is possible that this file will hold
+# the true minimum configuration. You can test to see if this is
+# the case by running the boot test with BOOT_TYPE = allnoconfig and
+# setting setting the MIN_CONFIG to ${CONFIG_DIR}/config-skip. If the
+# machine still boots, then you can use the config-skip as your MIN_CONFIG.
+#
+# These tests can run for several hours (and perhaps days).
+# It's OK to kill the test with a Ctrl^C. By restarting without
+# modifying this config, ktest.pl will notice that the config-new-min(-net)
+# exists, and will use that instead as the starting point.
+# The USE_OUTPUT_MIN_CONFIG is set to 1 to keep ktest.pl from asking
+# you if you want to use the OUTPUT_MIN_CONFIG as the starting point.
+# By using the OUTPUT_MIN_CONFIG as the starting point will allow ktest.pl to
+# start almost where it left off.
+#
+TEST_START IF ${TEST} == min-config
+TEST_TYPE = make_min_config
+OUTPUT_MIN_CONFIG = ${CONFIG_DIR}/config-new-min-net
+IGNORE_CONFIG = ${CONFIG_DIR}/config-skip-net
+MIN_CONFIG_TYPE = test
+TEST = ${SSH} echo hi
+USE_OUTPUT_MIN_CONFIG = 1
+
+TEST_START IF ${TEST} == min-config && ${MULTI}
+TEST_TYPE = make_min_config
+OUTPUT_MIN_CONFIG = ${CONFIG_DIR}/config-new-min
+IGNORE_CONFIG = ${CONFIG_DIR}/config-skip
+MIN_CONFIG = ${CONFIG_DIR}/config-new-min-net
+USE_OUTPUT_MIN_CONFIG = 1
diff --git a/tools/testing/ktest/examples/include/patchcheck.conf b/tools/testing/ktest/examples/include/patchcheck.conf
new file mode 100644
index 000000000000..339d3e1700ff
--- /dev/null
+++ b/tools/testing/ktest/examples/include/patchcheck.conf
@@ -0,0 +1,74 @@
+# patchcheck.conf
+#
+# This contains a test that takes two git commits and will test each
+# commit between the two. The build test will look at what files the
+# commit has touched, and if any of those files produce a warning, then
+# the build will fail.
+
+
+# PATCH_START is the commit to begin with and PATCH_END is the commit
+# to end with (inclusive). This is similar to doing a git rebase -i PATCH_START~1
+# and then testing each commit and doing a git rebase --continue.
+# You can use a SHA1, a git tag, or anything that git will accept for a checkout
+
+PATCH_START := HEAD~3
+PATCH_END := HEAD
+
+# Change PATCH_CHECKOUT to be the branch you want to test. The test will
+# do a git checkout of this branch before starting. Obviously both
+# PATCH_START and PATCH_END must be in this branch (and PATCH_START must
+# be contained by PATCH_END).
+
+PATCH_CHECKOUT := test/branch
+
+# Usually it's a good idea to have a set config to use for testing individual
+# patches.
+PATCH_CONFIG := ${CONFIG_DIR}/config-patchcheck
+
+# Change PATCH_TEST to run some test for each patch. Each commit that is
+# tested, after it is built and installed on the test machine, this command
+# will be executed. Usually what is done is to ssh to the target box and
+# run some test scripts. If you just want to boot test your patches
+# comment PATCH_TEST out.
+PATCH_TEST := ${SSH} "/usr/local/bin/ktest-test-script"
+
+DEFAULTS IF DEFINED PATCH_TEST
+PATCH_TEST_TYPE := test
+
+DEFAULTS ELSE
+PATCH_TEST_TYPE := boot
+
+# If for some reason a file has a warning that one of your patches touch
+# but you do not care about it, set IGNORE_WARNINGS to that commit(s)
+# (space delimited)
+#IGNORE_WARNINGS = 39eaf7ef884dcc44f7ff1bac803ca2a1dcf43544 6edb2a8a385f0cdef51dae37ff23e74d76d8a6ce
+
+# If you are running a multi test, and the test failed on the first
+# test but on, say the 5th patch. If you want to restart on the
+# fifth patch, set PATCH_START1. This will make the first test start
+# from this commit instead of the PATCH_START commit.
+# Note, do not change this option. Just define PATCH_START1 in the
+# top config (the one you pass to ktest.pl), and this will use it,
+# otherwise it will just use PATCH_START if PATCH_START1 is not defined.
+DEFAULTS IF NOT DEFINED PATCH_START1
+PATCH_START1 := ${PATCH_START}
+
+TEST_START IF ${TEST} == patchcheck
+TEST_TYPE = patchcheck
+MIN_CONFIG = ${PATCH_CONFIG}
+TEST = ${PATCH_TEST}
+PATCHCHECK_TYPE = ${PATCH_TEST_TYPE}
+PATCHCHECK_START = ${PATCH_START1}
+PATCHCHECK_END = ${PATCH_END}
+CHECKOUT = ${PATCH_CHECKOUT}
+
+TEST_START IF ${TEST} == patchcheck && ${MULTI}
+TEST_TYPE = patchcheck
+MIN_CONFIG = ${PATCH_CONFIG}
+TEST = ${PATCH_TEST}
+PATCHCHECK_TYPE = ${PATCH_TEST_TYPE}
+PATCHCHECK_START = ${PATCH_START}
+PATCHCHECK_END = ${PATCH_END}
+CHECKOUT = ${PATCH_CHECKOUT}
+# Use multi to test different compilers?
+MAKE_CMD = CC=gcc-4.5.1 make
diff --git a/tools/testing/ktest/examples/include/tests.conf b/tools/testing/ktest/examples/include/tests.conf
new file mode 100644
index 000000000000..4fdb811bd810
--- /dev/null
+++ b/tools/testing/ktest/examples/include/tests.conf
@@ -0,0 +1,74 @@
+#
+# This is an example of various tests that you can run
+#
+# The variable TEST can be of boot, build, randconfig, or test.
+#
+# Note that TEST is a variable created with ':=' and only exists
+# throughout the config processing (not during the tests itself).
+#
+# The TEST option (defined with '=') is used to tell ktest.pl
+# what test to run after a successful boot. The TEST option is
+# persistent into the test runs.
+#
+
+# The config that includes this file may define a BOOT_TYPE
+# variable that tells this config what type of boot test to run.
+# If it's not defined, the below DEFAULTS will set the default
+# to 'oldconfig'.
+#
+DEFAULTS IF NOT DEFINED BOOT_TYPE
+BOOT_TYPE := oldconfig
+
+# The config that includes this file may define a RUN_TEST
+# variable that will tell this config what test to run.
+# (what to set the TEST option to).
+#
+DEFAULTS IF NOT DEFINED RUN_TEST
+# Requires that hackbench is in the PATH
+RUN_TEST := ${SSH} hackbench 50
+
+
+# If TEST is set to 'boot' then just build a kernel and boot
+# the target.
+TEST_START IF ${TEST} == boot
+TEST_TYPE = boot
+# Notice how we set the BUILD_TYPE option to the BOOT_TYPE variable.
+BUILD_TYPE = ${BOOT_TYPE}
+# Do not do a make mrproper.
+BUILD_NOCLEAN = 1
+
+# If you only want to build the kernel, and perhaps install
+# and test it yourself, then just set TEST to build.
+TEST_START IF ${TEST} == build
+TEST_TYPE = build
+BUILD_TYPE = ${BOOT_TYPE}
+BUILD_NOCLEAN = 1
+
+# Build, install, boot and test with a randconfg 10 times.
+# It is important that you have set MIN_CONFIG in the config
+# that includes this file otherwise it is likely that the
+# randconfig will not have the neccessary configs needed to
+# boot your box. This version of the test requires a min
+# config that has enough to make sure the target has network
+# working.
+TEST_START ITERATE 10 IF ${TEST} == randconfig
+MIN_CONFIG = ${CONFIG_DIR}/config-min-net
+TEST_TYPE = test
+BUILD_TYPE = randconfig
+TEST = ${RUN_TEST}
+
+# This is the same as above, but only tests to a boot prompt.
+# The MIN_CONFIG used here does not need to have networking
+# working.
+TEST_START ITERATE 10 IF ${TEST} == randconfig && ${MULTI}
+TEST_TYPE = boot
+BUILD_TYPE = randconfig
+MIN_CONFIG = ${CONFIG_DIR}/config-min
+MAKE_CMD = make
+
+# This builds, installs, boots and tests the target.
+TEST_START IF ${TEST} == test
+TEST_TYPE = test
+BUILD_TYPE = ${BOOT_TYPE}
+TEST = ${RUN_TEST}
+BUILD_NOCLEAN = 1
diff --git a/tools/testing/ktest/examples/kvm.conf b/tools/testing/ktest/examples/kvm.conf
new file mode 100644
index 000000000000..831c7c5395f1
--- /dev/null
+++ b/tools/testing/ktest/examples/kvm.conf
@@ -0,0 +1,88 @@
+#
+# This config is an example usage of ktest.pl with a kvm guest
+#
+# The guest is called 'Guest' and this would be something that
+# could be run on the host to test a virtual machine target.
+
+MACHINE = Guest
+
+
+# Use virsh to read the serial console of the guest
+CONSOLE =  virsh console ${MACHINE}
+
+#*************************************#
+# This part is the same as test.conf  #
+#*************************************#
+
+# The include files will set up the type of test to run. Just set TEST to
+# which test you want to run.
+#
+# TESTS = patchcheck, randconfig, boot, test, config-bisect, bisect, min-config
+#
+# See the include/*.conf files that define these tests
+#
+TEST := patchcheck
+
+# Some tests may have more than one test to run. Define MULTI := 1 to run
+# the extra tests.
+MULTI := 0
+
+# In case you want to differentiate which type of system you are testing
+BITS := 64
+
+# REBOOT = none, error, fail, empty
+#  See include/defaults.conf
+REBOOT := empty
+
+
+# The defaults file will set up various settings that can be used by all
+# machine configs.
+INCLUDE include/defaults.conf
+
+
+#*************************************#
+# Now we are different from test.conf #
+#*************************************#
+
+
+# The example here assumes that Guest is running a Fedora release
+# that uses dracut for its initfs. The POST_INSTALL will be executed
+# after the install of the kernel and modules are complete.
+#
+POST_INSTALL = ${SSH} /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
+
+# Guests sometimes get stuck on reboot. We wait 3 seconds after running
+# the reboot command and then  do a full power-cycle of the guest.
+# This forces the guest to restart.
+#
+POWERCYCLE_AFTER_REBOOT = 3
+
+# We do the same after the halt command, but this time we wait 20 seconds.
+POWEROFF_AFTER_HALT = 20
+
+
+# As the defaults.conf file has a POWER_CYCLE option already defined,
+# and options can not be defined in the same section more than once
+# (all DEFAULTS sections are considered the same). We use the
+# DEFAULTS OVERRIDE to tell ktest.pl to ignore the previous defined
+# options, for the options set in the OVERRIDE section.
+#
+DEFAULTS OVERRIDE
+
+# Instead of using the default POWER_CYCLE option defined in
+# defaults.conf, we use virsh to cycle it. To do so, we destroy
+# the guest, wait 5 seconds, and then start it up again.
+# Crude, but effective.
+#
+POWER_CYCLE = virsh destroy ${MACHINE}; sleep 5; virsh start ${MACHINE}
+
+
+DEFAULTS
+
+# The following files each handle a different test case.
+# Having them included allows you to set up more than one machine and share
+# the same tests.
+INCLUDE include/patchcheck.conf
+INCLUDE include/tests.conf
+INCLUDE include/bisect.conf
+INCLUDE include/min-config.conf
diff --git a/tools/testing/ktest/examples/snowball.conf b/tools/testing/ktest/examples/snowball.conf
new file mode 100644
index 000000000000..a82a3c5bc2b7
--- /dev/null
+++ b/tools/testing/ktest/examples/snowball.conf
@@ -0,0 +1,53 @@
+# This example was used to boot the snowball ARM board.
+# See http://people.redhat.com/srostedt/ktest-embedded-2012/
+
+# PWD is a ktest.pl variable that will result in the process working
+# directory that ktest.pl is executed in.
+
+# THIS_DIR is automatically assigned the PWD of the path that generated
+# the config file. It is best to use this variable when assigning other
+# directory paths within this directory. This allows you to easily
+# move the test cases to other locations or to other machines.
+#
+THIS_DIR := /home/rostedt/work/demo/ktest-embed
+LOG_FILE = ${OUTPUT_DIR}/snowball.log
+CLEAR_LOG = 1
+MAKE_CMD = PATH=/usr/local/gcc-4.5.2-nolibc/arm-unknown-linux-gnueabi/bin:$PATH CROSS_COMPILE=arm-unknown-linux-gnueabi- make ARCH=arm
+ADD_CONFIG = ${THIS_DIR}/addconfig
+
+SCP_TO_TARGET = echo "don't do scp"
+
+TFTPBOOT := /var/lib/tftpboot
+TFTPDEF := ${TFTPBOOT}/snowball-default
+TFTPTEST := ${OUTPUT_DIR}/${BUILD_TARGET}
+
+SWITCH_TO_GOOD = cp ${TFTPDEF} ${TARGET_IMAGE}
+SWITCH_TO_TEST = cp ${TFTPTEST} ${TARGET_IMAGE}
+
+# Define each test with TEST_START
+# The config options below it will override the defaults
+TEST_START SKIP
+TEST_TYPE = boot
+BUILD_TYPE = u8500_defconfig
+BUILD_NOCLEAN = 1
+
+TEST_START
+TEST_TYPE = make_min_config
+OUTPUT_MIN_CONFIG = ${THIS_DIR}/config.newmin
+START_MIN_CONFIG = ${THIS_DIR}/config.orig
+IGNORE_CONFIG = ${THIS_DIR}/config.ignore
+BUILD_NOCLEAN = 1
+
+
+DEFAULTS
+LOCALVERSION = -test
+POWER_CYCLE = echo use the thumb luke; read a
+CONSOLE = cat ${THIS_DIR}/snowball-cat
+REBOOT_TYPE = script
+SSH_USER = root
+BUILD_OPTIONS = -j8 uImage
+BUILD_DIR = ${THIS_DIR}/linux.git
+OUTPUT_DIR = ${THIS_DIR}/snowball-build
+MACHINE = snowball
+TARGET_IMAGE = /var/lib/tftpboot/snowball-image
+BUILD_TARGET = arch/arm/boot/uImage
diff --git a/tools/testing/ktest/examples/test.conf b/tools/testing/ktest/examples/test.conf
new file mode 100644
index 000000000000..b725210efb7f
--- /dev/null
+++ b/tools/testing/ktest/examples/test.conf
@@ -0,0 +1,62 @@
+#
+# Generic config for a machine
+#
+
+# Name your machine (the DNS name, what you ssh to)
+MACHINE = foo
+
+# BOX can be different than foo, if the machine BOX has
+# multiple partitions with different systems installed. For example,
+# you may have a i386 and x86_64 installation on a test box.
+# If this is the case, MACHINE defines the way to connect to the
+# machine, which may be different between which system the machine
+# is booting into. BOX is used for the scripts to reboot and power cycle
+# the machine, where it does not matter which system the machine boots into.
+#
+#BOX := bar
+
+# Define a way to read the console
+CONSOLE = stty -F /dev/ttyS0 115200 parodd; cat /dev/ttyS0
+
+# The include files will set up the type of test to run. Just set TEST to
+# which test you want to run.
+#
+# TESTS = patchcheck, randconfig, boot, test, config-bisect, bisect, min-config
+#
+# See the include/*.conf files that define these tests
+#
+TEST := patchcheck
+
+# Some tests may have more than one test to run. Define MULTI := 1 to run
+# the extra tests.
+MULTI := 0
+
+# In case you want to differentiate which type of system you are testing
+BITS := 64
+
+# REBOOT = none, error, fail, empty
+#  See include/defaults.conf
+REBOOT := empty
+
+# The defaults file will set up various settings that can be used by all
+# machine configs.
+INCLUDE include/defaults.conf
+
+# In case you need to add a patch for a bisect or something
+#PRE_BUILD = patch -p1 < ${THIS_DIR}/fix.patch
+
+# Reset the repo after the build and remove all 'test' modules from the target
+# Notice that DO_POST_BUILD is a variable (defined by ':=') and POST_BUILD
+# is the option (defined by '=')
+
+DO_POST_BUILD := git reset --hard
+POST_BUILD = ${SSH} 'rm -rf /lib/modules/*-test*'; ${DO_POST_BUILD}
+
+# The following files each handle a different test case.
+# Having them included allows you to set up more than one machine and share
+# the same tests.
+INCLUDE include/patchcheck.conf
+INCLUDE include/tests.conf
+INCLUDE include/bisect.conf
+INCLUDE include/min-config.conf
+
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 95d6a6f7c33a..292b13ad03f5 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -39,6 +39,7 @@ my %default = (
     "CLEAR_LOG"			=> 0,
     "BISECT_MANUAL"		=> 0,
     "BISECT_SKIP"		=> 1,
+    "MIN_CONFIG_TYPE"		=> "boot",
     "SUCCESS_LINE"		=> "login:",
     "DETECT_TRIPLE_FAULT"	=> 1,
     "NO_INSTALL"		=> 0,
@@ -66,6 +67,7 @@ my %default = (
 
 my $ktest_config;
 my $version;
+my $have_version = 0;
 my $machine;
 my $ssh_user;
 my $tmpdir;
@@ -106,6 +108,8 @@ my $minconfig;
 my $start_minconfig;
 my $start_minconfig_defined;
 my $output_minconfig;
+my $minconfig_type;
+my $use_output_minconfig;
 my $ignore_config;
 my $ignore_errors;
 my $addconfig;
@@ -183,6 +187,9 @@ my %force_config;
 # do not force reboots on config problems
 my $no_reboot = 1;
 
+# reboot on success
+my $reboot_success = 0;
+
 my %option_map = (
     "MACHINE"			=> \$machine,
     "SSH_USER"			=> \$ssh_user,
@@ -202,6 +209,8 @@ my %option_map = (
     "MIN_CONFIG"		=> \$minconfig,
     "OUTPUT_MIN_CONFIG"		=> \$output_minconfig,
     "START_MIN_CONFIG"		=> \$start_minconfig,
+    "MIN_CONFIG_TYPE"		=> \$minconfig_type,
+    "USE_OUTPUT_MIN_CONFIG"	=> \$use_output_minconfig,
     "IGNORE_CONFIG"		=> \$ignore_config,
     "TEST"			=> \$run_test,
     "ADD_CONFIG"		=> \$addconfig,
@@ -1699,10 +1708,12 @@ sub install {
 
 sub get_version {
     # get the release name
+    return if ($have_version);
     doprint "$make kernelrelease ... ";
     $version = `$make kernelrelease | tail -1`;
     chomp($version);
     doprint "$version\n";
+    $have_version = 1;
 }
 
 sub start_monitor_and_boot {
@@ -1825,6 +1836,9 @@ sub build {
     my $save_no_reboot = $no_reboot;
     $no_reboot = 1;
 
+    # Calculate a new version from here.
+    $have_version = 0;
+
     if (defined($pre_build)) {
 	my $ret = run_command $pre_build;
 	if (!$ret && defined($pre_build_die) &&
@@ -1884,6 +1898,9 @@ sub build {
     undef $redirect;
 
     if (defined($post_build)) {
+	# Because a post build may change the kernel version
+	# do it now.
+	get_version;
 	my $ret = run_command $post_build;
 	if (!$ret && defined($post_build_die) &&
 	    $post_build_die) {
@@ -2192,7 +2209,7 @@ sub run_bisect {
     }
 
     # Are we looking for where it worked, not failed?
-    if ($reverse_bisect) {
+    if ($reverse_bisect && $ret >= 0) {
 	$ret = !$ret;
     }
 
@@ -3116,6 +3133,12 @@ sub test_this_config {
 sub make_min_config {
     my ($i) = @_;
 
+    my $type = $minconfig_type;
+    if ($type ne "boot" && $type ne "test") {
+	fail "Invalid MIN_CONFIG_TYPE '$minconfig_type'\n" .
+	    " make_min_config works only with 'boot' and 'test'\n" and return;
+    }
+
     if (!defined($output_minconfig)) {
 	fail "OUTPUT_MIN_CONFIG not defined" and return;
     }
@@ -3125,8 +3148,15 @@ sub make_min_config {
     # that instead.
     if (-f $output_minconfig && !$start_minconfig_defined) {
 	print "$output_minconfig exists\n";
-	if (read_yn " Use it as minconfig?") {
+	if (!defined($use_output_minconfig)) {
+	    if (read_yn " Use it as minconfig?") {
+		$start_minconfig = $output_minconfig;
+	    }
+	} elsif ($use_output_minconfig > 0) {
+	    doprint "Using $output_minconfig as MIN_CONFIG\n";
 	    $start_minconfig = $output_minconfig;
+	} else {
+	    doprint "Set to still use MIN_CONFIG as starting point\n";
 	}
     }
 
@@ -3275,6 +3305,11 @@ sub make_min_config {
 	build "oldconfig" or $failed = 1;
 	if (!$failed) {
 		start_monitor_and_boot or $failed = 1;
+
+		if ($type eq "test" && !$failed) {
+		    do_run_test or $failed = 1;
+		}
+
 		end_monitor;
 	}
 
@@ -3469,6 +3504,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
 
     # Do not reboot on failing test options
     $no_reboot = 1;
+    $reboot_success = 0;
+
+    $have_version = 0;
 
     $iteration = $i;
 
@@ -3554,9 +3592,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
 	    die "failed to checkout $checkout";
     }
 
+    $no_reboot = 0;
+
     # A test may opt to not reboot the box
     if ($reboot_on_success) {
-	$no_reboot = 0;
+	$reboot_success = 1;
     }
 
     if ($test_type eq "bisect") {
@@ -3600,7 +3640,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
 
 if ($opt{"POWEROFF_ON_SUCCESS"}) {
     halt;
-} elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot) {
+} elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot && $reboot_success) {
     reboot_to_good;
 } elsif (defined($switch_to_good)) {
     # still need to get to the good kernel
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index b682456afda8..cf362b3d1ec9 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -158,7 +158,7 @@
 #
 # TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf
 #
-# Notice the use of paranthesis. Without any paranthesis the above would be
+# Notice the use of parentheses. Without any parentheses the above would be
 # processed the same as:
 #
 # TEST_START IF DEFINED ALL_TESTS || (${MYTEST} == boottest && ${MACHINE} == gandalf)
@@ -1105,10 +1105,26 @@
 #   and will not be tested again in later runs.
 #   (optional)
 #
+#  MIN_CONFIG_TYPE can be either 'boot' or 'test'. With 'boot' it will
+#   test if the created config can just boot the machine. If this is
+#   set to 'test', then the TEST option must be defined and the created
+#   config will not only boot the target, but also make sure that the
+#   config lets the test succeed. This is useful to make sure the final
+#   config that is generated allows network activity (ssh).
+#   (optional)
+#
+#  USE_OUTPUT_MIN_CONFIG set this to 1 if you do not want to be prompted
+#   about using the OUTPUT_MIN_CONFIG as the MIN_CONFIG as the starting
+#   point. Set it to 0 if you want to always just use the given MIN_CONFIG.
+#   If it is not defined, it will prompt you to pick which config
+#   to start with (MIN_CONFIG or OUTPUT_MIN_CONFIG).
+#
 # Example:
 #
 #  TEST_TYPE = make_min_config
 #  OUTPUT_MIN_CONFIG = /path/to/config-new-min
 #  START_MIN_CONFIG = /path/to/config-min
 #  IGNORE_CONFIG = /path/to/config-tested
+#  MIN_CONFIG_TYPE = test
+#  TEST = ssh ${USER}@${MACHINE} echo hi
 #
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 28bc57ee757c..a4162e15c25f 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -1,4 +1,4 @@
-TARGETS = breakpoints vm
+TARGETS = breakpoints kcmp mqueue vm
 
 all:
 	for TARGET in $(TARGETS); do \
diff --git a/tools/testing/selftests/kcmp/Makefile b/tools/testing/selftests/kcmp/Makefile
new file mode 100644
index 000000000000..dc79b86ea65c
--- /dev/null
+++ b/tools/testing/selftests/kcmp/Makefile
@@ -0,0 +1,29 @@
+uname_M := $(shell uname -m 2>/dev/null || echo not)
+ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/)
+ifeq ($(ARCH),i386)
+        ARCH := X86
+	CFLAGS := -DCONFIG_X86_32 -D__i386__
+endif
+ifeq ($(ARCH),x86_64)
+	ARCH := X86
+	CFLAGS := -DCONFIG_X86_64 -D__x86_64__
+endif
+
+CFLAGS += -I../../../../arch/x86/include/generated/
+CFLAGS += -I../../../../include/
+CFLAGS += -I../../../../usr/include/
+CFLAGS += -I../../../../arch/x86/include/
+
+all:
+ifeq ($(ARCH),X86)
+	gcc $(CFLAGS) kcmp_test.c -o run_test
+else
+	echo "Not an x86 target, can't build kcmp selftest"
+endif
+
+run-tests: all
+	./kcmp_test
+
+clean:
+	rm -fr ./run_test
+	rm -fr ./test-file
diff --git a/tools/testing/selftests/kcmp/kcmp_test.c b/tools/testing/selftests/kcmp/kcmp_test.c
new file mode 100644
index 000000000000..358cc6bfa35d
--- /dev/null
+++ b/tools/testing/selftests/kcmp/kcmp_test.c
@@ -0,0 +1,94 @@
+#define _GNU_SOURCE
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <limits.h>
+#include <unistd.h>
+#include <errno.h>
+#include <string.h>
+#include <fcntl.h>
+
+#include <linux/unistd.h>
+#include <linux/kcmp.h>
+
+#include <sys/syscall.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+
+static long sys_kcmp(int pid1, int pid2, int type, int fd1, int fd2)
+{
+	return syscall(__NR_kcmp, pid1, pid2, type, fd1, fd2);
+}
+
+int main(int argc, char **argv)
+{
+	const char kpath[] = "kcmp-test-file";
+	int pid1, pid2;
+	int fd1, fd2;
+	int status;
+
+	fd1 = open(kpath, O_RDWR | O_CREAT | O_TRUNC, 0644);
+	pid1 = getpid();
+
+	if (fd1 < 0) {
+		perror("Can't create file");
+		exit(1);
+	}
+
+	pid2 = fork();
+	if (pid2 < 0) {
+		perror("fork failed");
+		exit(1);
+	}
+
+	if (!pid2) {
+		int pid2 = getpid();
+		int ret;
+
+		fd2 = open(kpath, O_RDWR, 0644);
+		if (fd2 < 0) {
+			perror("Can't open file");
+			exit(1);
+		}
+
+		/* An example of output and arguments */
+		printf("pid1: %6d pid2: %6d FD: %2ld FILES: %2ld VM: %2ld "
+		       "FS: %2ld SIGHAND: %2ld IO: %2ld SYSVSEM: %2ld "
+		       "INV: %2ld\n",
+		       pid1, pid2,
+		       sys_kcmp(pid1, pid2, KCMP_FILE,		fd1, fd2),
+		       sys_kcmp(pid1, pid2, KCMP_FILES,		0, 0),
+		       sys_kcmp(pid1, pid2, KCMP_VM,		0, 0),
+		       sys_kcmp(pid1, pid2, KCMP_FS,		0, 0),
+		       sys_kcmp(pid1, pid2, KCMP_SIGHAND,	0, 0),
+		       sys_kcmp(pid1, pid2, KCMP_IO,		0, 0),
+		       sys_kcmp(pid1, pid2, KCMP_SYSVSEM,	0, 0),
+
+			/* This one should fail */
+		       sys_kcmp(pid1, pid2, KCMP_TYPES + 1,	0, 0));
+
+		/* This one should return same fd */
+		ret = sys_kcmp(pid1, pid2, KCMP_FILE, fd1, fd1);
+		if (ret) {
+			printf("FAIL: 0 expected but %d returned\n", ret);
+			ret = -1;
+		} else
+			printf("PASS: 0 returned as expected\n");
+
+		/* Compare with self */
+		ret = sys_kcmp(pid1, pid1, KCMP_VM, 0, 0);
+		if (ret) {
+			printf("FAIL: 0 expected but %li returned\n", ret);
+			ret = -1;
+		} else
+			printf("PASS: 0 returned as expected\n");
+
+		exit(ret);
+	}
+
+	waitpid(pid2, &status, P_ALL);
+
+	return 0;
+}
diff --git a/tools/testing/selftests/mqueue/.gitignore b/tools/testing/selftests/mqueue/.gitignore
new file mode 100644
index 000000000000..d8d42377205a
--- /dev/null
+++ b/tools/testing/selftests/mqueue/.gitignore
@@ -0,0 +1,2 @@
+mq_open_tests
+mq_perf_tests
diff --git a/tools/testing/selftests/mqueue/Makefile b/tools/testing/selftests/mqueue/Makefile
new file mode 100644
index 000000000000..54c0aad2b47c
--- /dev/null
+++ b/tools/testing/selftests/mqueue/Makefile
@@ -0,0 +1,10 @@
+all:
+	gcc -O2 -lrt mq_open_tests.c -o mq_open_tests
+	gcc -O2 -lrt -lpthread -lpopt -o mq_perf_tests mq_perf_tests.c
+
+run_tests:
+	./mq_open_tests /test1
+	./mq_perf_tests
+
+clean:
+	rm -f mq_open_tests mq_perf_tests
diff --git a/tools/testing/selftests/mqueue/mq_open_tests.c b/tools/testing/selftests/mqueue/mq_open_tests.c
new file mode 100644
index 000000000000..711cc2923047
--- /dev/null
+++ b/tools/testing/selftests/mqueue/mq_open_tests.c
@@ -0,0 +1,492 @@
+/*
+ * This application is Copyright 2012 Red Hat, Inc.
+ *	Doug Ledford <dledford@redhat.com>
+ *
+ * mq_open_tests is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 3.
+ *
+ * mq_open_tests is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * For the full text of the license, see <http://www.gnu.org/licenses/>.
+ *
+ * mq_open_tests.c
+ *   Tests the various situations that should either succeed or fail to
+ *   open a posix message queue and then reports whether or not they
+ *   did as they were supposed to.
+ *
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <limits.h>
+#include <errno.h>
+#include <sys/types.h>
+#include <sys/time.h>
+#include <sys/resource.h>
+#include <sys/stat.h>
+#include <mqueue.h>
+
+static char *usage =
+"Usage:\n"
+"  %s path\n"
+"\n"
+"	path	Path name of the message queue to create\n"
+"\n"
+"	Note: this program must be run as root in order to enable all tests\n"
+"\n";
+
+char *DEF_MSGS = "/proc/sys/fs/mqueue/msg_default";
+char *DEF_MSGSIZE = "/proc/sys/fs/mqueue/msgsize_default";
+char *MAX_MSGS = "/proc/sys/fs/mqueue/msg_max";
+char *MAX_MSGSIZE = "/proc/sys/fs/mqueue/msgsize_max";
+
+int default_settings;
+struct rlimit saved_limits, cur_limits;
+int saved_def_msgs, saved_def_msgsize, saved_max_msgs, saved_max_msgsize;
+int cur_def_msgs, cur_def_msgsize, cur_max_msgs, cur_max_msgsize;
+FILE *def_msgs, *def_msgsize, *max_msgs, *max_msgsize;
+char *queue_path;
+mqd_t queue = -1;
+
+static inline void __set(FILE *stream, int value, char *err_msg);
+void shutdown(int exit_val, char *err_cause, int line_no);
+static inline int get(FILE *stream);
+static inline void set(FILE *stream, int value);
+static inline void getr(int type, struct rlimit *rlim);
+static inline void setr(int type, struct rlimit *rlim);
+void validate_current_settings();
+static inline void test_queue(struct mq_attr *attr, struct mq_attr *result);
+static inline int test_queue_fail(struct mq_attr *attr, struct mq_attr *result);
+
+static inline void __set(FILE *stream, int value, char *err_msg)
+{
+	rewind(stream);
+	if (fprintf(stream, "%d", value) < 0)
+		perror(err_msg);
+}
+
+
+void shutdown(int exit_val, char *err_cause, int line_no)
+{
+	static int in_shutdown = 0;
+
+	/* In case we get called recursively by a set() call below */
+	if (in_shutdown++)
+		return;
+
+	seteuid(0);
+
+	if (queue != -1)
+		if (mq_close(queue))
+			perror("mq_close() during shutdown");
+	if (queue_path)
+		/*
+		 * Be silent if this fails, if we cleaned up already it's
+		 * expected to fail
+		 */
+		mq_unlink(queue_path);
+	if (default_settings) {
+		if (saved_def_msgs)
+			__set(def_msgs, saved_def_msgs,
+			      "failed to restore saved_def_msgs");
+		if (saved_def_msgsize)
+			__set(def_msgsize, saved_def_msgsize,
+			      "failed to restore saved_def_msgsize");
+	}
+	if (saved_max_msgs)
+		__set(max_msgs, saved_max_msgs,
+		      "failed to restore saved_max_msgs");
+	if (saved_max_msgsize)
+		__set(max_msgsize, saved_max_msgsize,
+		      "failed to restore saved_max_msgsize");
+	if (exit_val)
+		error(exit_val, errno, "%s at %d", err_cause, line_no);
+	exit(0);
+}
+
+static inline int get(FILE *stream)
+{
+	int value;
+	rewind(stream);
+	if (fscanf(stream, "%d", &value) != 1)
+		shutdown(4, "Error reading /proc entry", __LINE__ - 1);
+	return value;
+}
+
+static inline void set(FILE *stream, int value)
+{
+	int new_value;
+
+	rewind(stream);
+	if (fprintf(stream, "%d", value) < 0)
+		return shutdown(5, "Failed writing to /proc file",
+				__LINE__ - 1);
+	new_value = get(stream);
+	if (new_value != value)
+		return shutdown(5, "We didn't get what we wrote to /proc back",
+				__LINE__ - 1);
+}
+
+static inline void getr(int type, struct rlimit *rlim)
+{
+	if (getrlimit(type, rlim))
+		shutdown(6, "getrlimit()", __LINE__ - 1);
+}
+
+static inline void setr(int type, struct rlimit *rlim)
+{
+	if (setrlimit(type, rlim))
+		shutdown(7, "setrlimit()", __LINE__ - 1);
+}
+
+void validate_current_settings()
+{
+	int rlim_needed;
+
+	if (cur_limits.rlim_cur < 4096) {
+		printf("Current rlimit value for POSIX message queue bytes is "
+		       "unreasonably low,\nincreasing.\n\n");
+		cur_limits.rlim_cur = 8192;
+		cur_limits.rlim_max = 16384;
+		setr(RLIMIT_MSGQUEUE, &cur_limits);
+	}
+
+	if (default_settings) {
+		rlim_needed = (cur_def_msgs + 1) * (cur_def_msgsize + 1 +
+						    2 * sizeof(void *));
+		if (rlim_needed > cur_limits.rlim_cur) {
+			printf("Temporarily lowering default queue parameters "
+			       "to something that will work\n"
+			       "with the current rlimit values.\n\n");
+			set(def_msgs, 10);
+			cur_def_msgs = 10;
+			set(def_msgsize, 128);
+			cur_def_msgsize = 128;
+		}
+	} else {
+		rlim_needed = (cur_max_msgs + 1) * (cur_max_msgsize + 1 +
+						    2 * sizeof(void *));
+		if (rlim_needed > cur_limits.rlim_cur) {
+			printf("Temporarily lowering maximum queue parameters "
+			       "to something that will work\n"
+			       "with the current rlimit values in case this is "
+			       "a kernel that ties the default\n"
+			       "queue parameters to the maximum queue "
+			       "parameters.\n\n");
+			set(max_msgs, 10);
+			cur_max_msgs = 10;
+			set(max_msgsize, 128);
+			cur_max_msgsize = 128;
+		}
+	}
+}
+
+/*
+ * test_queue - Test opening a queue, shutdown if we fail.  This should
+ * only be called in situations that should never fail.  We clean up
+ * after ourselves and return the queue attributes in *result.
+ */
+static inline void test_queue(struct mq_attr *attr, struct mq_attr *result)
+{
+	int flags = O_RDWR | O_EXCL | O_CREAT;
+	int perms = DEFFILEMODE;
+
+	if ((queue = mq_open(queue_path, flags, perms, attr)) == -1)
+		shutdown(1, "mq_open()", __LINE__);
+	if (mq_getattr(queue, result))
+		shutdown(1, "mq_getattr()", __LINE__);
+	if (mq_close(queue))
+		shutdown(1, "mq_close()", __LINE__);
+	queue = -1;
+	if (mq_unlink(queue_path))
+		shutdown(1, "mq_unlink()", __LINE__);
+}
+
+/*
+ * Same as test_queue above, but failure is not fatal.
+ * Returns:
+ * 0 - Failed to create a queue
+ * 1 - Created a queue, attributes in *result
+ */
+static inline int test_queue_fail(struct mq_attr *attr, struct mq_attr *result)
+{
+	int flags = O_RDWR | O_EXCL | O_CREAT;
+	int perms = DEFFILEMODE;
+
+	if ((queue = mq_open(queue_path, flags, perms, attr)) == -1)
+		return 0;
+	if (mq_getattr(queue, result))
+		shutdown(1, "mq_getattr()", __LINE__);
+	if (mq_close(queue))
+		shutdown(1, "mq_close()", __LINE__);
+	queue = -1;
+	if (mq_unlink(queue_path))
+		shutdown(1, "mq_unlink()", __LINE__);
+	return 1;
+}
+
+int main(int argc, char *argv[])
+{
+	struct mq_attr attr, result;
+
+	if (argc != 2) {
+		fprintf(stderr, "Must pass a valid queue name\n\n");
+		fprintf(stderr, usage, argv[0]);
+		exit(1);
+	}
+
+	/*
+	 * Although we can create a msg queue with a non-absolute path name,
+	 * unlink will fail.  So, if the name doesn't start with a /, add one
+	 * when we save it.
+	 */
+	if (*argv[1] == '/')
+		queue_path = strdup(argv[1]);
+	else {
+		queue_path = malloc(strlen(argv[1]) + 2);
+		if (!queue_path) {
+			perror("malloc()");
+			exit(1);
+		}
+		queue_path[0] = '/';
+		queue_path[1] = 0;
+		strcat(queue_path, argv[1]);
+	}
+
+	if (getuid() != 0) {
+		fprintf(stderr, "Not running as root, but almost all tests "
+			"require root in order to modify\nsystem settings.  "
+			"Exiting.\n");
+		exit(1);
+	}
+
+	/* Find out what files there are for us to make tweaks in */
+	def_msgs = fopen(DEF_MSGS, "r+");
+	def_msgsize = fopen(DEF_MSGSIZE, "r+");
+	max_msgs = fopen(MAX_MSGS, "r+");
+	max_msgsize = fopen(MAX_MSGSIZE, "r+");
+
+	if (!max_msgs)
+		shutdown(2, "Failed to open msg_max", __LINE__);
+	if (!max_msgsize)
+		shutdown(2, "Failed to open msgsize_max", __LINE__);
+	if (def_msgs || def_msgsize)
+		default_settings = 1;
+
+	/* Load up the current system values for everything we can */
+	getr(RLIMIT_MSGQUEUE, &saved_limits);
+	cur_limits = saved_limits;
+	if (default_settings) {
+		saved_def_msgs = cur_def_msgs = get(def_msgs);
+		saved_def_msgsize = cur_def_msgsize = get(def_msgsize);
+	}
+	saved_max_msgs = cur_max_msgs = get(max_msgs);
+	saved_max_msgsize = cur_max_msgsize = get(max_msgsize);
+
+	/* Tell the user our initial state */
+	printf("\nInitial system state:\n");
+	printf("\tUsing queue path:\t\t%s\n", queue_path);
+	printf("\tRLIMIT_MSGQUEUE(soft):\t\t%d\n", saved_limits.rlim_cur);
+	printf("\tRLIMIT_MSGQUEUE(hard):\t\t%d\n", saved_limits.rlim_max);
+	printf("\tMaximum Message Size:\t\t%d\n", saved_max_msgsize);
+	printf("\tMaximum Queue Size:\t\t%d\n", saved_max_msgs);
+	if (default_settings) {
+		printf("\tDefault Message Size:\t\t%d\n", saved_def_msgsize);
+		printf("\tDefault Queue Size:\t\t%d\n", saved_def_msgs);
+	} else {
+		printf("\tDefault Message Size:\t\tNot Supported\n");
+		printf("\tDefault Queue Size:\t\tNot Supported\n");
+	}
+	printf("\n");
+
+	validate_current_settings();
+
+	printf("Adjusted system state for testing:\n");
+	printf("\tRLIMIT_MSGQUEUE(soft):\t\t%d\n", cur_limits.rlim_cur);
+	printf("\tRLIMIT_MSGQUEUE(hard):\t\t%d\n", cur_limits.rlim_max);
+	printf("\tMaximum Message Size:\t\t%d\n", cur_max_msgsize);
+	printf("\tMaximum Queue Size:\t\t%d\n", cur_max_msgs);
+	if (default_settings) {
+		printf("\tDefault Message Size:\t\t%d\n", cur_def_msgsize);
+		printf("\tDefault Queue Size:\t\t%d\n", cur_def_msgs);
+	}
+
+	printf("\n\nTest series 1, behavior when no attr struct "
+	       "passed to mq_open:\n");
+	if (!default_settings) {
+		test_queue(NULL, &result);
+		printf("Given sane system settings, mq_open without an attr "
+		       "struct succeeds:\tPASS\n");
+		if (result.mq_maxmsg != cur_max_msgs ||
+		    result.mq_msgsize != cur_max_msgsize) {
+			printf("Kernel does not support setting the default "
+			       "mq attributes,\nbut also doesn't tie the "
+			       "defaults to the maximums:\t\t\tPASS\n");
+		} else {
+			set(max_msgs, ++cur_max_msgs);
+			set(max_msgsize, ++cur_max_msgsize);
+			test_queue(NULL, &result);
+			if (result.mq_maxmsg == cur_max_msgs &&
+			    result.mq_msgsize == cur_max_msgsize)
+				printf("Kernel does not support setting the "
+				       "default mq attributes and\n"
+				       "also ties system wide defaults to "
+				       "the system wide maximums:\t\t"
+				       "FAIL\n");
+			else
+				printf("Kernel does not support setting the "
+				       "default mq attributes,\n"
+				       "but also doesn't tie the defaults to "
+				       "the maximums:\t\t\tPASS\n");
+		}
+	} else {
+		printf("Kernel supports setting defaults separately from "
+		       "maximums:\t\tPASS\n");
+		/*
+		 * While we are here, go ahead and test that the kernel
+		 * properly follows the default settings
+		 */
+		test_queue(NULL, &result);
+		printf("Given sane values, mq_open without an attr struct "
+		       "succeeds:\t\tPASS\n");
+		if (result.mq_maxmsg != cur_def_msgs ||
+		    result.mq_msgsize != cur_def_msgsize)
+			printf("Kernel supports setting defaults, but does "
+			       "not actually honor them:\tFAIL\n\n");
+		else {
+			set(def_msgs, ++cur_def_msgs);
+			set(def_msgsize, ++cur_def_msgsize);
+			/* In case max was the same as the default */
+			set(max_msgs, ++cur_max_msgs);
+			set(max_msgsize, ++cur_max_msgsize);
+			test_queue(NULL, &result);
+			if (result.mq_maxmsg != cur_def_msgs ||
+			    result.mq_msgsize != cur_def_msgsize)
+				printf("Kernel supports setting defaults, but "
+				       "does not actually honor them:\t"
+				       "FAIL\n");
+			else
+				printf("Kernel properly honors default setting "
+				       "knobs:\t\t\t\tPASS\n");
+		}
+		set(def_msgs, cur_max_msgs + 1);
+		cur_def_msgs = cur_max_msgs + 1;
+		set(def_msgsize, cur_max_msgsize + 1);
+		cur_def_msgsize = cur_max_msgsize + 1;
+		if (cur_def_msgs * (cur_def_msgsize + 2 * sizeof(void *)) >=
+		    cur_limits.rlim_cur) {
+			cur_limits.rlim_cur = (cur_def_msgs + 2) *
+				(cur_def_msgsize + 2 * sizeof(void *));
+			cur_limits.rlim_max = 2 * cur_limits.rlim_cur;
+			setr(RLIMIT_MSGQUEUE, &cur_limits);
+		}
+		if (test_queue_fail(NULL, &result)) {
+			if (result.mq_maxmsg == cur_max_msgs &&
+			    result.mq_msgsize == cur_max_msgsize)
+				printf("Kernel properly limits default values "
+				       "to lesser of default/max:\t\tPASS\n");
+			else
+				printf("Kernel does not properly set default "
+				       "queue parameters when\ndefaults > "
+				       "max:\t\t\t\t\t\t\t\tFAIL\n");
+		} else
+			printf("Kernel fails to open mq because defaults are "
+			       "greater than maximums:\tFAIL\n");
+		set(def_msgs, --cur_def_msgs);
+		set(def_msgsize, --cur_def_msgsize);
+		cur_limits.rlim_cur = cur_limits.rlim_max = cur_def_msgs *
+			cur_def_msgsize;
+		setr(RLIMIT_MSGQUEUE, &cur_limits);
+		if (test_queue_fail(NULL, &result))
+			printf("Kernel creates queue even though defaults "
+			       "would exceed\nrlimit setting:"
+			       "\t\t\t\t\t\t\t\tFAIL\n");
+		else
+			printf("Kernel properly fails to create queue when "
+			       "defaults would\nexceed rlimit:"
+			       "\t\t\t\t\t\t\t\tPASS\n");
+	}
+
+	/*
+	 * Test #2 - open with an attr struct that exceeds rlimit
+	 */
+	printf("\n\nTest series 2, behavior when attr struct is "
+	       "passed to mq_open:\n");
+	cur_max_msgs = 32;
+	cur_max_msgsize = cur_limits.rlim_max >> 4;
+	set(max_msgs, cur_max_msgs);
+	set(max_msgsize, cur_max_msgsize);
+	attr.mq_maxmsg = cur_max_msgs;
+	attr.mq_msgsize = cur_max_msgsize;
+	if (test_queue_fail(&attr, &result))
+		printf("Queue open in excess of rlimit max when euid = 0 "
+		       "succeeded:\t\tFAIL\n");
+	else
+		printf("Queue open in excess of rlimit max when euid = 0 "
+		       "failed:\t\tPASS\n");
+	attr.mq_maxmsg = cur_max_msgs + 1;
+	attr.mq_msgsize = 10;
+	if (test_queue_fail(&attr, &result))
+		printf("Queue open with mq_maxmsg > limit when euid = 0 "
+		       "succeeded:\t\tPASS\n");
+	else
+		printf("Queue open with mq_maxmsg > limit when euid = 0 "
+		       "failed:\t\tFAIL\n");
+	attr.mq_maxmsg = 1;
+	attr.mq_msgsize = cur_max_msgsize + 1;
+	if (test_queue_fail(&attr, &result))
+		printf("Queue open with mq_msgsize > limit when euid = 0 "
+		       "succeeded:\t\tPASS\n");
+	else
+		printf("Queue open with mq_msgsize > limit when euid = 0 "
+		       "failed:\t\tFAIL\n");
+	attr.mq_maxmsg = 65536;
+	attr.mq_msgsize = 65536;
+	if (test_queue_fail(&attr, &result))
+		printf("Queue open with total size > 2GB when euid = 0 "
+		       "succeeded:\t\tFAIL\n");
+	else
+		printf("Queue open with total size > 2GB when euid = 0 "
+		       "failed:\t\t\tPASS\n");
+	seteuid(99);
+	attr.mq_maxmsg = cur_max_msgs;
+	attr.mq_msgsize = cur_max_msgsize;
+	if (test_queue_fail(&attr, &result))
+		printf("Queue open in excess of rlimit max when euid = 99 "
+		       "succeeded:\t\tFAIL\n");
+	else
+		printf("Queue open in excess of rlimit max when euid = 99 "
+		       "failed:\t\tPASS\n");
+	attr.mq_maxmsg = cur_max_msgs + 1;
+	attr.mq_msgsize = 10;
+	if (test_queue_fail(&attr, &result))
+		printf("Queue open with mq_maxmsg > limit when euid = 99 "
+		       "succeeded:\t\tFAIL\n");
+	else
+		printf("Queue open with mq_maxmsg > limit when euid = 99 "
+		       "failed:\t\tPASS\n");
+	attr.mq_maxmsg = 1;
+	attr.mq_msgsize = cur_max_msgsize + 1;
+	if (test_queue_fail(&attr, &result))
+		printf("Queue open with mq_msgsize > limit when euid = 99 "
+		       "succeeded:\t\tFAIL\n");
+	else
+		printf("Queue open with mq_msgsize > limit when euid = 99 "
+		       "failed:\t\tPASS\n");
+	attr.mq_maxmsg = 65536;
+	attr.mq_msgsize = 65536;
+	if (test_queue_fail(&attr, &result))
+		printf("Queue open with total size > 2GB when euid = 99 "
+		       "succeeded:\t\tFAIL\n");
+	else
+		printf("Queue open with total size > 2GB when euid = 99 "
+		       "failed:\t\t\tPASS\n");
+
+	shutdown(0,"",0);
+}
diff --git a/tools/testing/selftests/mqueue/mq_perf_tests.c b/tools/testing/selftests/mqueue/mq_perf_tests.c
new file mode 100644
index 000000000000..2fadd4b97045
--- /dev/null
+++ b/tools/testing/selftests/mqueue/mq_perf_tests.c
@@ -0,0 +1,741 @@
+/*
+ * This application is Copyright 2012 Red Hat, Inc.
+ *	Doug Ledford <dledford@redhat.com>
+ *
+ * mq_perf_tests is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 3.
+ *
+ * mq_perf_tests is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * For the full text of the license, see <http://www.gnu.org/licenses/>.
+ *
+ * mq_perf_tests.c
+ *   Tests various types of message queue workloads, concentrating on those
+ *   situations that invole large message sizes, large message queue depths,
+ *   or both, and reports back useful metrics about kernel message queue
+ *   performance.
+ *
+ */
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <limits.h>
+#include <errno.h>
+#include <signal.h>
+#include <pthread.h>
+#include <sched.h>
+#include <sys/types.h>
+#include <sys/time.h>
+#include <sys/resource.h>
+#include <sys/stat.h>
+#include <mqueue.h>
+#include <popt.h>
+
+static char *usage =
+"Usage:\n"
+"  %s [-c #[,#..] -f] path\n"
+"\n"
+"	-c #	Skip most tests and go straight to a high queue depth test\n"
+"		and then run that test continuously (useful for running at\n"
+"		the same time as some other workload to see how much the\n"
+"		cache thrashing caused by adding messages to a very deep\n"
+"		queue impacts the performance of other programs).  The number\n"
+"		indicates which CPU core we should bind the process to during\n"
+"		the run.  If you have more than one physical CPU, then you\n"
+"		will need one copy per physical CPU package, and you should\n"
+"		specify the CPU cores to pin ourself to via a comma separated\n"
+"		list of CPU values.\n"
+"	-f	Only usable with continuous mode.  Pin ourself to the CPUs\n"
+"		as requested, then instead of looping doing a high mq\n"
+"		workload, just busy loop.  This will allow us to lock up a\n"
+"		single CPU just like we normally would, but without actually\n"
+"		thrashing the CPU cache.  This is to make it easier to get\n"
+"		comparable numbers from some other workload running on the\n"
+"		other CPUs.  One set of numbers with # CPUs locked up running\n"
+"		an mq workload, and another set of numbers with those same\n"
+"		CPUs locked away from the test workload, but not doing\n"
+"		anything to trash the cache like the mq workload might.\n"
+"	path	Path name of the message queue to create\n"
+"\n"
+"	Note: this program must be run as root in order to enable all tests\n"
+"\n";
+
+char *MAX_MSGS = "/proc/sys/fs/mqueue/msg_max";
+char *MAX_MSGSIZE = "/proc/sys/fs/mqueue/msgsize_max";
+
+#define min(a, b) ((a) < (b) ? (a) : (b))
+#define MAX_CPUS 64
+char *cpu_option_string;
+int cpus_to_pin[MAX_CPUS];
+int num_cpus_to_pin;
+pthread_t cpu_threads[MAX_CPUS];
+pthread_t main_thread;
+cpu_set_t *cpu_set;
+int cpu_set_size;
+int cpus_online;
+
+#define MSG_SIZE 16
+#define TEST1_LOOPS 10000000
+#define TEST2_LOOPS 100000
+int continuous_mode;
+int continuous_mode_fake;
+
+struct rlimit saved_limits, cur_limits;
+int saved_max_msgs, saved_max_msgsize;
+int cur_max_msgs, cur_max_msgsize;
+FILE *max_msgs, *max_msgsize;
+int cur_nice;
+char *queue_path = "/mq_perf_tests";
+mqd_t queue = -1;
+struct mq_attr result;
+int mq_prio_max;
+
+const struct poptOption options[] = {
+	{
+		.longName = "continuous",
+		.shortName = 'c',
+		.argInfo = POPT_ARG_STRING,
+		.arg = &cpu_option_string,
+		.val = 'c',
+		.descrip = "Run continuous tests at a high queue depth in "
+			"order to test the effects of cache thrashing on "
+			"other tasks on the system.  This test is intended "
+			"to be run on one core of each physical CPU while "
+			"some other CPU intensive task is run on all the other "
+			"cores of that same physical CPU and the other task "
+			"is timed.  It is assumed that the process of adding "
+			"messages to the message queue in a tight loop will "
+			"impact that other task to some degree.  Once the "
+			"tests are performed in this way, you should then "
+			"re-run the tests using fake mode in order to check "
+			"the difference in time required to perform the CPU "
+			"intensive task",
+		.argDescrip = "cpu[,cpu]",
+	},
+	{
+		.longName = "fake",
+		.shortName = 'f',
+		.argInfo = POPT_ARG_NONE,
+		.arg = &continuous_mode_fake,
+		.val = 0,
+		.descrip = "Tie up the CPUs that we would normally tie up in"
+			"continuous mode, but don't actually do any mq stuff, "
+			"just keep the CPU busy so it can't be used to process "
+			"system level tasks as this would free up resources on "
+			"the other CPU cores and skew the comparison between "
+			"the no-mqueue work and mqueue work tests",
+		.argDescrip = NULL,
+	},
+	{
+		.longName = "path",
+		.shortName = 'p',
+		.argInfo = POPT_ARG_STRING | POPT_ARGFLAG_SHOW_DEFAULT,
+		.arg = &queue_path,
+		.val = 'p',
+		.descrip = "The name of the path to use in the mqueue "
+			"filesystem for our tests",
+		.argDescrip = "pathname",
+	},
+	POPT_AUTOHELP
+	POPT_TABLEEND
+};
+
+static inline void __set(FILE *stream, int value, char *err_msg);
+void shutdown(int exit_val, char *err_cause, int line_no);
+void sig_action_SIGUSR1(int signum, siginfo_t *info, void *context);
+void sig_action(int signum, siginfo_t *info, void *context);
+static inline int get(FILE *stream);
+static inline void set(FILE *stream, int value);
+static inline int try_set(FILE *stream, int value);
+static inline void getr(int type, struct rlimit *rlim);
+static inline void setr(int type, struct rlimit *rlim);
+static inline void open_queue(struct mq_attr *attr);
+void increase_limits(void);
+
+static inline void __set(FILE *stream, int value, char *err_msg)
+{
+	rewind(stream);
+	if (fprintf(stream, "%d", value) < 0)
+		perror(err_msg);
+}
+
+
+void shutdown(int exit_val, char *err_cause, int line_no)
+{
+	static int in_shutdown = 0;
+	int errno_at_shutdown = errno;
+	int i;
+
+	/* In case we get called by multiple threads or from an sighandler */
+	if (in_shutdown++)
+		return;
+
+	for (i = 0; i < num_cpus_to_pin; i++)
+		if (cpu_threads[i]) {
+			pthread_kill(cpu_threads[i], SIGUSR1);
+			pthread_join(cpu_threads[i], NULL);
+		}
+
+	if (queue != -1)
+		if (mq_close(queue))
+			perror("mq_close() during shutdown");
+	if (queue_path)
+		/*
+		 * Be silent if this fails, if we cleaned up already it's
+		 * expected to fail
+		 */
+		mq_unlink(queue_path);
+	if (saved_max_msgs)
+		__set(max_msgs, saved_max_msgs,
+		      "failed to restore saved_max_msgs");
+	if (saved_max_msgsize)
+		__set(max_msgsize, saved_max_msgsize,
+		      "failed to restore saved_max_msgsize");
+	if (exit_val)
+		error(exit_val, errno_at_shutdown, "%s at %d",
+		      err_cause, line_no);
+	exit(0);
+}
+
+void sig_action_SIGUSR1(int signum, siginfo_t *info, void *context)
+{
+	if (pthread_self() != main_thread)
+		pthread_exit(0);
+	else {
+		fprintf(stderr, "Caught signal %d in SIGUSR1 handler, "
+				"exiting\n", signum);
+		shutdown(0, "", 0);
+		fprintf(stderr, "\n\nReturned from shutdown?!?!\n\n");
+		exit(0);
+	}
+}
+
+void sig_action(int signum, siginfo_t *info, void *context)
+{
+	if (pthread_self() != main_thread)
+		pthread_kill(main_thread, signum);
+	else {
+		fprintf(stderr, "Caught signal %d, exiting\n", signum);
+		shutdown(0, "", 0);
+		fprintf(stderr, "\n\nReturned from shutdown?!?!\n\n");
+		exit(0);
+	}
+}
+
+static inline int get(FILE *stream)
+{
+	int value;
+	rewind(stream);
+	if (fscanf(stream, "%d", &value) != 1)
+		shutdown(4, "Error reading /proc entry", __LINE__);
+	return value;
+}
+
+static inline void set(FILE *stream, int value)
+{
+	int new_value;
+
+	rewind(stream);
+	if (fprintf(stream, "%d", value) < 0)
+		return shutdown(5, "Failed writing to /proc file", __LINE__);
+	new_value = get(stream);
+	if (new_value != value)
+		return shutdown(5, "We didn't get what we wrote to /proc back",
+				__LINE__);
+}
+
+static inline int try_set(FILE *stream, int value)
+{
+	int new_value;
+
+	rewind(stream);
+	fprintf(stream, "%d", value);
+	new_value = get(stream);
+	return new_value == value;
+}
+
+static inline void getr(int type, struct rlimit *rlim)
+{
+	if (getrlimit(type, rlim))
+		shutdown(6, "getrlimit()", __LINE__);
+}
+
+static inline void setr(int type, struct rlimit *rlim)
+{
+	if (setrlimit(type, rlim))
+		shutdown(7, "setrlimit()", __LINE__);
+}
+
+/**
+ * open_queue - open the global queue for testing
+ * @attr - An attr struct specifying the desired queue traits
+ * @result - An attr struct that lists the actual traits the queue has
+ *
+ * This open is not allowed to fail, failure will result in an orderly
+ * shutdown of the program.  The global queue_path is used to set what
+ * queue to open, the queue descriptor is saved in the global queue
+ * variable.
+ */
+static inline void open_queue(struct mq_attr *attr)
+{
+	int flags = O_RDWR | O_EXCL | O_CREAT | O_NONBLOCK;
+	int perms = DEFFILEMODE;
+
+	queue = mq_open(queue_path, flags, perms, attr);
+	if (queue == -1)
+		shutdown(1, "mq_open()", __LINE__);
+	if (mq_getattr(queue, &result))
+		shutdown(1, "mq_getattr()", __LINE__);
+	printf("\n\tQueue %s created:\n", queue_path);
+	printf("\t\tmq_flags:\t\t\t%s\n", result.mq_flags & O_NONBLOCK ?
+	       "O_NONBLOCK" : "(null)");
+	printf("\t\tmq_maxmsg:\t\t\t%d\n", result.mq_maxmsg);
+	printf("\t\tmq_msgsize:\t\t\t%d\n", result.mq_msgsize);
+	printf("\t\tmq_curmsgs:\t\t\t%d\n", result.mq_curmsgs);
+}
+
+void *fake_cont_thread(void *arg)
+{
+	int i;
+
+	for (i = 0; i < num_cpus_to_pin; i++)
+		if (cpu_threads[i] == pthread_self())
+			break;
+	printf("\tStarted fake continuous mode thread %d on CPU %d\n", i,
+	       cpus_to_pin[i]);
+	while (1)
+		;
+}
+
+void *cont_thread(void *arg)
+{
+	char buff[MSG_SIZE];
+	int i, priority;
+
+	for (i = 0; i < num_cpus_to_pin; i++)
+		if (cpu_threads[i] == pthread_self())
+			break;
+	printf("\tStarted continuous mode thread %d on CPU %d\n", i,
+	       cpus_to_pin[i]);
+	while (1) {
+		while (mq_send(queue, buff, sizeof(buff), 0) == 0)
+			;
+		mq_receive(queue, buff, sizeof(buff), &priority);
+	}
+}
+
+#define drain_queue() \
+	while (mq_receive(queue, buff, MSG_SIZE, &prio_in) == MSG_SIZE)
+
+#define do_untimed_send() \
+	do { \
+		if (mq_send(queue, buff, MSG_SIZE, prio_out)) \
+			shutdown(3, "Test send failure", __LINE__); \
+	} while (0)
+
+#define do_send_recv() \
+	do { \
+		clock_gettime(clock, &start); \
+		if (mq_send(queue, buff, MSG_SIZE, prio_out)) \
+			shutdown(3, "Test send failure", __LINE__); \
+		clock_gettime(clock, &middle); \
+		if (mq_receive(queue, buff, MSG_SIZE, &prio_in) != MSG_SIZE) \
+			shutdown(3, "Test receive failure", __LINE__); \
+		clock_gettime(clock, &end); \
+		nsec = ((middle.tv_sec - start.tv_sec) * 1000000000) + \
+			(middle.tv_nsec - start.tv_nsec); \
+		send_total.tv_nsec += nsec; \
+		if (send_total.tv_nsec >= 1000000000) { \
+			send_total.tv_sec++; \
+			send_total.tv_nsec -= 1000000000; \
+		} \
+		nsec = ((end.tv_sec - middle.tv_sec) * 1000000000) + \
+			(end.tv_nsec - middle.tv_nsec); \
+		recv_total.tv_nsec += nsec; \
+		if (recv_total.tv_nsec >= 1000000000) { \
+			recv_total.tv_sec++; \
+			recv_total.tv_nsec -= 1000000000; \
+		} \
+	} while (0)
+
+struct test {
+	char *desc;
+	void (*func)(int *);
+};
+
+void const_prio(int *prio)
+{
+	return;
+}
+
+void inc_prio(int *prio)
+{
+	if (++*prio == mq_prio_max)
+		*prio = 0;
+}
+
+void dec_prio(int *prio)
+{
+	if (--*prio < 0)
+		*prio = mq_prio_max - 1;
+}
+
+void random_prio(int *prio)
+{
+	*prio = random() % mq_prio_max;
+}
+
+struct test test2[] = {
+	{"\n\tTest #2a: Time send/recv message, queue full, constant prio\n",
+		const_prio},
+	{"\n\tTest #2b: Time send/recv message, queue full, increasing prio\n",
+		inc_prio},
+	{"\n\tTest #2c: Time send/recv message, queue full, decreasing prio\n",
+		dec_prio},
+	{"\n\tTest #2d: Time send/recv message, queue full, random prio\n",
+		random_prio},
+	{NULL, NULL}
+};
+
+/**
+ * Tests to perform (all done with MSG_SIZE messages):
+ *
+ * 1) Time to add/remove message with 0 messages on queue
+ * 1a) with constant prio
+ * 2) Time to add/remove message when queue close to capacity:
+ * 2a) with constant prio
+ * 2b) with increasing prio
+ * 2c) with decreasing prio
+ * 2d) with random prio
+ * 3) Test limits of priorities honored (double check _SC_MQ_PRIO_MAX)
+ */
+void *perf_test_thread(void *arg)
+{
+	char buff[MSG_SIZE];
+	int prio_out, prio_in;
+	int i;
+	clockid_t clock;
+	pthread_t *t;
+	struct timespec res, start, middle, end, send_total, recv_total;
+	unsigned long long nsec;
+	struct test *cur_test;
+
+	t = &cpu_threads[0];
+	printf("\n\tStarted mqueue performance test thread on CPU %d\n",
+	       cpus_to_pin[0]);
+	mq_prio_max = sysconf(_SC_MQ_PRIO_MAX);
+	if (mq_prio_max == -1)
+		shutdown(2, "sysconf(_SC_MQ_PRIO_MAX)", __LINE__);
+	if (pthread_getcpuclockid(cpu_threads[0], &clock) != 0)
+		shutdown(2, "pthread_getcpuclockid", __LINE__);
+
+	if (clock_getres(clock, &res))
+		shutdown(2, "clock_getres()", __LINE__);
+
+	printf("\t\tMax priorities:\t\t\t%d\n", mq_prio_max);
+	printf("\t\tClock resolution:\t\t%d nsec%s\n", res.tv_nsec,
+	       res.tv_nsec > 1 ? "s" : "");
+
+
+
+	printf("\n\tTest #1: Time send/recv message, queue empty\n");
+	printf("\t\t(%d iterations)\n", TEST1_LOOPS);
+	prio_out = 0;
+	send_total.tv_sec = 0;
+	send_total.tv_nsec = 0;
+	recv_total.tv_sec = 0;
+	recv_total.tv_nsec = 0;
+	for (i = 0; i < TEST1_LOOPS; i++)
+		do_send_recv();
+	printf("\t\tSend msg:\t\t\t%d.%ds total time\n",
+	       send_total.tv_sec, send_total.tv_nsec);
+	nsec = ((unsigned long long)send_total.tv_sec * 1000000000 +
+		 send_total.tv_nsec) / TEST1_LOOPS;
+	printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
+	printf("\t\tRecv msg:\t\t\t%d.%ds total time\n",
+	       recv_total.tv_sec, recv_total.tv_nsec);
+	nsec = ((unsigned long long)recv_total.tv_sec * 1000000000 +
+		recv_total.tv_nsec) / TEST1_LOOPS;
+	printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
+
+
+	for (cur_test = test2; cur_test->desc != NULL; cur_test++) {
+		printf(cur_test->desc);
+		printf("\t\t(%d iterations)\n", TEST2_LOOPS);
+		prio_out = 0;
+		send_total.tv_sec = 0;
+		send_total.tv_nsec = 0;
+		recv_total.tv_sec = 0;
+		recv_total.tv_nsec = 0;
+		printf("\t\tFilling queue...");
+		fflush(stdout);
+		clock_gettime(clock, &start);
+		for (i = 0; i < result.mq_maxmsg - 1; i++) {
+			do_untimed_send();
+			cur_test->func(&prio_out);
+		}
+		clock_gettime(clock, &end);
+		nsec = ((unsigned long long)(end.tv_sec - start.tv_sec) *
+			1000000000) + (end.tv_nsec - start.tv_nsec);
+		printf("done.\t\t%lld.%llds\n", nsec / 1000000000,
+		       nsec % 1000000000);
+		printf("\t\tTesting...");
+		fflush(stdout);
+		for (i = 0; i < TEST2_LOOPS; i++) {
+			do_send_recv();
+			cur_test->func(&prio_out);
+		}
+		printf("done.\n");
+		printf("\t\tSend msg:\t\t\t%d.%ds total time\n",
+		       send_total.tv_sec, send_total.tv_nsec);
+		nsec = ((unsigned long long)send_total.tv_sec * 1000000000 +
+			 send_total.tv_nsec) / TEST2_LOOPS;
+		printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
+		printf("\t\tRecv msg:\t\t\t%d.%ds total time\n",
+		       recv_total.tv_sec, recv_total.tv_nsec);
+		nsec = ((unsigned long long)recv_total.tv_sec * 1000000000 +
+			recv_total.tv_nsec) / TEST2_LOOPS;
+		printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
+		printf("\t\tDraining queue...");
+		fflush(stdout);
+		clock_gettime(clock, &start);
+		drain_queue();
+		clock_gettime(clock, &end);
+		nsec = ((unsigned long long)(end.tv_sec - start.tv_sec) *
+			1000000000) + (end.tv_nsec - start.tv_nsec);
+		printf("done.\t\t%lld.%llds\n", nsec / 1000000000,
+		       nsec % 1000000000);
+	}
+	return 0;
+}
+
+void increase_limits(void)
+{
+	cur_limits.rlim_cur = RLIM_INFINITY;
+	cur_limits.rlim_max = RLIM_INFINITY;
+	setr(RLIMIT_MSGQUEUE, &cur_limits);
+	while (try_set(max_msgs, cur_max_msgs += 10))
+		;
+	cur_max_msgs = get(max_msgs);
+	while (try_set(max_msgsize, cur_max_msgsize += 1024))
+		;
+	cur_max_msgsize = get(max_msgsize);
+	if (setpriority(PRIO_PROCESS, 0, -20) != 0)
+		shutdown(2, "setpriority()", __LINE__);
+	cur_nice = -20;
+}
+
+int main(int argc, char *argv[])
+{
+	struct mq_attr attr;
+	char *option, *next_option;
+	int i, cpu;
+	struct sigaction sa;
+	poptContext popt_context;
+	char rc;
+	void *retval;
+
+	main_thread = pthread_self();
+	num_cpus_to_pin = 0;
+
+	if (sysconf(_SC_NPROCESSORS_ONLN) == -1) {
+		perror("sysconf(_SC_NPROCESSORS_ONLN)");
+		exit(1);
+	}
+	cpus_online = min(MAX_CPUS, sysconf(_SC_NPROCESSORS_ONLN));
+	cpu_set = CPU_ALLOC(cpus_online);
+	if (cpu_set == NULL) {
+		perror("CPU_ALLOC()");
+		exit(1);
+	}
+	cpu_set_size = CPU_ALLOC_SIZE(cpus_online);
+	CPU_ZERO_S(cpu_set_size, cpu_set);
+
+	popt_context = poptGetContext(NULL, argc, (const char **)argv,
+				      options, 0);
+
+	while ((rc = poptGetNextOpt(popt_context)) > 0) {
+		switch (rc) {
+		case 'c':
+			continuous_mode = 1;
+			option = cpu_option_string;
+			do {
+				next_option = strchr(option, ',');
+				if (next_option)
+					*next_option = '\0';
+				cpu = atoi(option);
+				if (cpu >= cpus_online)
+					fprintf(stderr, "CPU %d exceeds "
+						"cpus online, ignoring.\n",
+						cpu);
+				else
+					cpus_to_pin[num_cpus_to_pin++] = cpu;
+				if (next_option)
+					option = ++next_option;
+			} while (next_option && num_cpus_to_pin < MAX_CPUS);
+			/* Double check that they didn't give us the same CPU
+			 * more than once */
+			for (cpu = 0; cpu < num_cpus_to_pin; cpu++) {
+				if (CPU_ISSET_S(cpus_to_pin[cpu], cpu_set_size,
+						cpu_set)) {
+					fprintf(stderr, "Any given CPU may "
+						"only be given once.\n");
+					exit(1);
+				} else
+					CPU_SET_S(cpus_to_pin[cpu],
+						  cpu_set_size, cpu_set);
+			}
+			break;
+		case 'p':
+			/*
+			 * Although we can create a msg queue with a
+			 * non-absolute path name, unlink will fail.  So,
+			 * if the name doesn't start with a /, add one
+			 * when we save it.
+			 */
+			option = queue_path;
+			if (*option != '/') {
+				queue_path = malloc(strlen(option) + 2);
+				if (!queue_path) {
+					perror("malloc()");
+					exit(1);
+				}
+				queue_path[0] = '/';
+				queue_path[1] = 0;
+				strcat(queue_path, option);
+				free(option);
+			}
+			break;
+		}
+	}
+
+	if (continuous_mode && num_cpus_to_pin == 0) {
+		fprintf(stderr, "Must pass at least one CPU to continuous "
+			"mode.\n");
+		poptPrintUsage(popt_context, stderr, 0);
+		exit(1);
+	} else if (!continuous_mode) {
+		num_cpus_to_pin = 1;
+		cpus_to_pin[0] = cpus_online - 1;
+	}
+
+	if (getuid() != 0) {
+		fprintf(stderr, "Not running as root, but almost all tests "
+			"require root in order to modify\nsystem settings.  "
+			"Exiting.\n");
+		exit(1);
+	}
+
+	max_msgs = fopen(MAX_MSGS, "r+");
+	max_msgsize = fopen(MAX_MSGSIZE, "r+");
+	if (!max_msgs)
+		shutdown(2, "Failed to open msg_max", __LINE__);
+	if (!max_msgsize)
+		shutdown(2, "Failed to open msgsize_max", __LINE__);
+
+	/* Load up the current system values for everything we can */
+	getr(RLIMIT_MSGQUEUE, &saved_limits);
+	cur_limits = saved_limits;
+	saved_max_msgs = cur_max_msgs = get(max_msgs);
+	saved_max_msgsize = cur_max_msgsize = get(max_msgsize);
+	errno = 0;
+	cur_nice = getpriority(PRIO_PROCESS, 0);
+	if (errno)
+		shutdown(2, "getpriority()", __LINE__);
+
+	/* Tell the user our initial state */
+	printf("\nInitial system state:\n");
+	printf("\tUsing queue path:\t\t\t%s\n", queue_path);
+	printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%d\n", saved_limits.rlim_cur);
+	printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%d\n", saved_limits.rlim_max);
+	printf("\tMaximum Message Size:\t\t\t%d\n", saved_max_msgsize);
+	printf("\tMaximum Queue Size:\t\t\t%d\n", saved_max_msgs);
+	printf("\tNice value:\t\t\t\t%d\n", cur_nice);
+	printf("\n");
+
+	increase_limits();
+
+	printf("Adjusted system state for testing:\n");
+	if (cur_limits.rlim_cur == RLIM_INFINITY) {
+		printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t(unlimited)\n");
+		printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t(unlimited)\n");
+	} else {
+		printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%d\n",
+		       cur_limits.rlim_cur);
+		printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%d\n",
+		       cur_limits.rlim_max);
+	}
+	printf("\tMaximum Message Size:\t\t\t%d\n", cur_max_msgsize);
+	printf("\tMaximum Queue Size:\t\t\t%d\n", cur_max_msgs);
+	printf("\tNice value:\t\t\t\t%d\n", cur_nice);
+	printf("\tContinuous mode:\t\t\t(%s)\n", continuous_mode ?
+	       (continuous_mode_fake ? "fake mode" : "enabled") :
+	       "disabled");
+	printf("\tCPUs to pin:\t\t\t\t%d", cpus_to_pin[0]);
+	for (cpu = 1; cpu < num_cpus_to_pin; cpu++)
+			printf(",%d", cpus_to_pin[cpu]);
+	printf("\n");
+
+	sa.sa_sigaction = sig_action_SIGUSR1;
+	sigemptyset(&sa.sa_mask);
+	sigaddset(&sa.sa_mask, SIGHUP);
+	sigaddset(&sa.sa_mask, SIGINT);
+	sigaddset(&sa.sa_mask, SIGQUIT);
+	sigaddset(&sa.sa_mask, SIGTERM);
+	sa.sa_flags = SA_SIGINFO;
+	if (sigaction(SIGUSR1, &sa, NULL) == -1)
+		shutdown(1, "sigaction(SIGUSR1)", __LINE__);
+	sa.sa_sigaction = sig_action;
+	if (sigaction(SIGHUP, &sa, NULL) == -1)
+		shutdown(1, "sigaction(SIGHUP)", __LINE__);
+	if (sigaction(SIGINT, &sa, NULL) == -1)
+		shutdown(1, "sigaction(SIGINT)", __LINE__);
+	if (sigaction(SIGQUIT, &sa, NULL) == -1)
+		shutdown(1, "sigaction(SIGQUIT)", __LINE__);
+	if (sigaction(SIGTERM, &sa, NULL) == -1)
+		shutdown(1, "sigaction(SIGTERM)", __LINE__);
+
+	if (!continuous_mode_fake) {
+		attr.mq_flags = O_NONBLOCK;
+		attr.mq_maxmsg = cur_max_msgs;
+		attr.mq_msgsize = MSG_SIZE;
+		open_queue(&attr);
+	}
+	for (i = 0; i < num_cpus_to_pin; i++) {
+		pthread_attr_t thread_attr;
+		void *thread_func;
+
+		if (continuous_mode_fake)
+			thread_func = &fake_cont_thread;
+		else if (continuous_mode)
+			thread_func = &cont_thread;
+		else
+			thread_func = &perf_test_thread;
+
+		CPU_ZERO_S(cpu_set_size, cpu_set);
+		CPU_SET_S(cpus_to_pin[i], cpu_set_size, cpu_set);
+		pthread_attr_init(&thread_attr);
+		pthread_attr_setaffinity_np(&thread_attr, cpu_set_size,
+					    cpu_set);
+		if (pthread_create(&cpu_threads[i], &thread_attr, thread_func,
+				   NULL))
+			shutdown(1, "pthread_create()", __LINE__);
+		pthread_attr_destroy(&thread_attr);
+	}
+
+	if (!continuous_mode) {
+		pthread_join(cpu_threads[0], &retval);
+		shutdown((long)retval, "perf_test_thread()", __LINE__);
+	} else {
+		while (1)
+			sleep(1);
+	}
+	shutdown(0, "", 0);
+}