Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "Lots of fixes, here goes:

   1) NULL deref in qtnfmac, from Gustavo A. R. Silva.

   2) Kernel oops when fw download fails in rtlwifi, from Ping-Ke Shih.

   3) Lost completion messages in AF_XDP, from Magnus Karlsson.

   4) Correct bogus self-assignment in rhashtable, from Rishabh
      Bhatnagar.

   5) Fix regression in ipv6 route append handling, from David Ahern.

   6) Fix masking in __set_phy_supported(), from Heiner Kallweit.

   7) Missing module owner set in x_tables icmp, from Florian Westphal.

   8) liquidio's timeouts are HZ dependent, fix from Nicholas Mc Guire.

   9) Link setting fixes for sh_eth and ravb, from Vladimir Zapolskiy.

  10) Fix NULL deref when using chains in act_csum, from Davide Caratti.

  11) XDP_REDIRECT needs to check if the interface is up and whether the
      MTU is sufficient. From Toshiaki Makita.

  12) Net diag can do a double free when killing TCP_NEW_SYN_RECV
      connections, from Lorenzo Colitti.

  13) nf_defrag in ipv6 can unnecessarily hold onto dst entries for a
      full minute, delaying device unregister. From Eric Dumazet.

  14) Update MAC entries in the correct order in ixgbe, from Alexander
      Duyck.

  15) Don't leave partial mangles bpf program in jit_subprogs, from
      Daniel Borkmann.

  16) Fix pfmemalloc SKB state propagation, from Stefano Brivio.

  17) Fix ACK handling in DCTCP congestion control, from Yuchung Cheng.

  18) Use after free in tun XDP_TX, from Toshiaki Makita.

  19) Stale ipv6 header pointer in ipv6 gre code, from Prashant Bhole.

  20) Don't reuse remainder of RX page when XDP is set in mlx4, from
      Saeed Mahameed.

  21) Fix window probe handling of TCP rapair sockets, from Stefan
      Baranoff.

  22) Missing socket locking in smc_ioctl(), from Ursula Braun.

  23) IPV6_ILA needs DST_CACHE, from Arnd Bergmann.

  24) Spectre v1 fix in cxgb3, from Gustavo A. R. Silva.

  25) Two spots in ipv6 do a rol32() on a hash value but ignore the
      result. Fixes from Colin Ian King"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (176 commits)
  tcp: identify cryptic messages as TCP seq # bugs
  ptp: fix missing break in switch
  hv_netvsc: Fix napi reschedule while receive completion is busy
  MAINTAINERS: Drop inactive Vitaly Bordug's email
  net: cavium: Add fine-granular dependencies on PCI
  net: qca_spi: Fix log level if probe fails
  net: qca_spi: Make sure the QCA7000 reset is triggered
  net: qca_spi: Avoid packet drop during initial sync
  ipv6: fix useless rol32 call on hash
  ipv6: sr: fix useless rol32 call on hash
  net: sched: Using NULL instead of plain integer
  net: usb: asix: replace mii_nway_restart in resume path
  net: cxgb3_main: fix potential Spectre v1
  lib/rhashtable: consider param->min_size when setting initial table size
  net/smc: reset recv timeout after clc handshake
  net/smc: add error handling for get_user()
  net/smc: optimize consumer cursor updates
  net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL.
  ipv6: ila: select CONFIG_DST_CACHE
  net: usb: rtl8150: demote allmulti message to dev_dbg()
  ...

3 files changed, 22 insertions, 45 deletions

diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c
index 2ecd27b670d7..f5f7bcc96046 100644
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -4975,6 +4975,24 @@ static struct bpf_test tests[] = {
 		.prog_type = BPF_PROG_TYPE_LWT_XMIT,
 	},
 	{
+		"make headroom for LWT_XMIT",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+			BPF_MOV64_IMM(BPF_REG_2, 34),
+			BPF_MOV64_IMM(BPF_REG_3, 0),
+			BPF_EMIT_CALL(BPF_FUNC_skb_change_head),
+			/* split for s390 to succeed */
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_6),
+			BPF_MOV64_IMM(BPF_REG_2, 42),
+			BPF_MOV64_IMM(BPF_REG_3, 0),
+			BPF_EMIT_CALL(BPF_FUNC_skb_change_head),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_LWT_XMIT,
+	},
+	{
 		"invalid access of tc_classid for LWT_IN",
 		.insns = {
 			BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_1,
@@ -12554,8 +12572,11 @@ static void do_test_single(struct bpf_test *test, bool unpriv,
 	}
 
 	if (fd_prog >= 0) {
+		__u8 tmp[TEST_DATA_LEN << 2];
+		__u32 size_tmp = sizeof(tmp);
+
 		err = bpf_prog_test_run(fd_prog, 1, test->data,
-					sizeof(test->data), NULL, NULL,
+					sizeof(test->data), tmp, &size_tmp,
 					&retval, NULL);
 		if (err && errno != 524/*ENOTSUPP*/ && errno != EPERM) {
 			printf("Unexpected bpf_prog_test_run error\n");
diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh
index 78245d60d8bc..0f45633bd634 100755
--- a/tools/testing/selftests/net/fib_tests.sh
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -740,13 +740,6 @@ ipv6_rt_add()
 	run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64"
 	log_test $? 2 "Attempt to add duplicate route - reject route"
 
-	# iproute2 prepend only sets NLM_F_CREATE
-	# - adds a new route; does NOT convert existing route to ECMP
-	add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
-	run_cmd "$IP -6 ro prepend 2001:db8:104::/64 via 2001:db8:103::2"
-	check_route6 "2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024 2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024"
-	log_test $? 0 "Add new route for existing prefix (w/o NLM_F_EXCL)"
-
 	# route append with same prefix adds a new route
 	# - iproute2 sets NLM_F_CREATE | NLM_F_APPEND
 	add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
@@ -754,27 +747,6 @@ ipv6_rt_add()
 	check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
 	log_test $? 0 "Append nexthop to existing route - gw"
 
-	add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
-	run_cmd "$IP -6 ro append 2001:db8:104::/64 dev veth3"
-	check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop dev veth3 weight 1"
-	log_test $? 0 "Append nexthop to existing route - dev only"
-
-	# multipath route can not have a nexthop that is a reject route
-	add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
-	run_cmd "$IP -6 ro append unreachable 2001:db8:104::/64"
-	log_test $? 2 "Append nexthop to existing route - reject route"
-
-	# reject route can not be converted to multipath route
-	run_cmd "$IP -6 ro flush 2001:db8:104::/64"
-	run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64"
-	run_cmd "$IP -6 ro append 2001:db8:104::/64 via 2001:db8:103::2"
-	log_test $? 2 "Append nexthop to existing reject route - gw"
-
-	run_cmd "$IP -6 ro flush 2001:db8:104::/64"
-	run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64"
-	run_cmd "$IP -6 ro append 2001:db8:104::/64 dev veth3"
-	log_test $? 2 "Append nexthop to existing reject route - dev only"
-
 	# insert mpath directly
 	add_route6 "2001:db8:104::/64" "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
 	check_route6  "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
@@ -819,13 +791,6 @@ ipv6_rt_replace_single()
 	check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::3 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
 	log_test $? 0 "Single path with multipath"
 
-	# single path with reject
-	#
-	add_initial_route6 "nexthop via 2001:db8:101::2"
-	run_cmd "$IP -6 ro replace unreachable 2001:db8:104::/64"
-	check_route6 "unreachable 2001:db8:104::/64 dev lo metric 1024"
-	log_test $? 0 "Single path with reject route"
-
 	# single path with single path using MULTIPATH attribute
 	#
 	add_initial_route6 "via 2001:db8:101::2"
@@ -873,12 +838,6 @@ ipv6_rt_replace_mpath()
 	check_route6 "2001:db8:104::/64 via 2001:db8:101::3 dev veth1 metric 1024"
 	log_test $? 0 "Multipath with single path via multipath attribute"
 
-	# multipath with reject
-	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
-	run_cmd "$IP -6 ro replace unreachable 2001:db8:104::/64"
-	check_route6 "unreachable 2001:db8:104::/64 dev lo metric 1024"
-	log_test $? 0 "Multipath with reject route"
-
 	# route replace fails - invalid nexthop 1
 	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
 	run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:111::3 nexthop via 2001:db8:103::3"
diff --git a/tools/testing/selftests/net/udpgso_bench.sh b/tools/testing/selftests/net/udpgso_bench.sh
index 792fa4d0285e..850767befa47 100755
--- a/tools/testing/selftests/net/udpgso_bench.sh
+++ b/tools/testing/selftests/net/udpgso_bench.sh
@@ -35,9 +35,6 @@ run_udp() {
 
 	echo "udp gso"
 	run_in_netns ${args} -S
-
-	echo "udp gso zerocopy"
-	run_in_netns ${args} -S -z
 }
 
 run_tcp() {