Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add framework for supporting PCIe devices in Endpoint mode (Kishon
   Vijay Abraham I)

 - use non-postable PCI config space mappings when possible (Lorenzo
   Pieralisi)

 - clean up and unify mmap of PCI BARs (David Woodhouse)

 - export and unify Function Level Reset support (Christoph Hellwig)

 - avoid FLR for Intel 82579 NICs (Sasha Neftin)

 - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)

 - short-circuit config access failures for disconnected devices (Keith
   Busch)

 - remove D3 sleep delay when possible (Adrian Hunter)

 - freeze PME scan before suspending devices (Lukas Wunner)

 - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)

 - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)

 - add arch-specific alignment control to improve device passthrough by
   avoiding multiple BARs in a page (Yongji Xie)

 - add sysfs sriov_drivers_autoprobe to control VF driver binding
   (Bodong Wang)

 - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)

 - fix crashes when unbinding host controllers that don't support
   removal (Brian Norris)

 - add driver for MicroSemi Switchtec management interface (Logan
   Gunthorpe)

 - add driver for Faraday Technology FTPCI100 host bridge (Linus
   Walleij)

 - add i.MX7D support (Andrey Smirnov)

 - use generic MSI support for Aardvark (Thomas Petazzoni)

 - make Rockchip driver modular (Brian Norris)

 - advertise 128-byte Read Completion Boundary support for Rockchip
   (Shawn Lin)

 - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)

 - convert atomic_t to refcount_t in HV driver (Elena Reshetova)

 - add CPU IRQ affinity in HV driver (K. Y. Srinivasan)

 - fix PCI bus removal in HV driver (Long Li)

 - add support for ThunderX2 DMA alias topology (Jayachandran C)

 - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)

 - add ITE 8893 bridge DMA alias quirk (Jarod Wilson)

 - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
   (Manish Jaggi)

* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
  PCI: Don't allow unbinding host controllers that aren't prepared
  ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  MAINTAINERS: Add PCI Endpoint maintainer
  Documentation: PCI: Add userguide for PCI endpoint test function
  tools: PCI: Add sample test script to invoke pcitest
  tools: PCI: Add a userspace tool to test PCI endpoint
  Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
  misc: Add host side PCI driver for PCI test function device
  PCI: Add device IDs for DRA74x and DRA72x
  dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
  PCI: dwc: dra7xx: Workaround for errata id i870
  dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
  PCI: dwc: dra7xx: Add EP mode support
  PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
  dt-bindings: PCI: Add DT bindings for PCI designware EP mode
  PCI: dwc: designware: Add EP mode support
  Documentation: PCI: Add binding documentation for pci-test endpoint function
  ixgbe: Use pcie_flr() instead of duplicating it
  IB/hfi1: Use pcie_flr() instead of duplicating it
  PCI: imx6: Fix spelling mistake: "contol" -> "control"
  ...

2 files changed, 242 insertions, 0 deletions

diff --git a/tools/pci/pcitest.c b/tools/pci/pcitest.c
new file mode 100644
index 000000000000..ad54a58d7dda
--- /dev/null
+++ b/tools/pci/pcitest.c
@@ -0,0 +1,186 @@
+/**
+ * Userspace PCI Endpoint Test Module
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/ioctl.h>
+#include <time.h>
+#include <unistd.h>
+
+#include <linux/pcitest.h>
+
+#define BILLION 1E9
+
+static char *result[] = { "NOT OKAY", "OKAY" };
+
+struct pci_test {
+	char		*device;
+	char		barnum;
+	bool		legacyirq;
+	unsigned int	msinum;
+	bool		read;
+	bool		write;
+	bool		copy;
+	unsigned long	size;
+};
+
+static int run_test(struct pci_test *test)
+{
+	long ret;
+	int fd;
+	struct timespec start, end;
+	double time;
+
+	fd = open(test->device, O_RDWR);
+	if (fd < 0) {
+		perror("can't open PCI Endpoint Test device");
+		return fd;
+	}
+
+	if (test->barnum >= 0 && test->barnum <= 5) {
+		ret = ioctl(fd, PCITEST_BAR, test->barnum);
+		fprintf(stdout, "BAR%d:\t\t", test->barnum);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->legacyirq) {
+		ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0);
+		fprintf(stdout, "LEGACY IRQ:\t");
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->msinum > 0 && test->msinum <= 32) {
+		ret = ioctl(fd, PCITEST_MSI, test->msinum);
+		fprintf(stdout, "MSI%d:\t\t", test->msinum);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->write) {
+		ret = ioctl(fd, PCITEST_WRITE, test->size);
+		fprintf(stdout, "WRITE (%7ld bytes):\t\t", test->size);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->read) {
+		ret = ioctl(fd, PCITEST_READ, test->size);
+		fprintf(stdout, "READ (%7ld bytes):\t\t", test->size);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->copy) {
+		ret = ioctl(fd, PCITEST_COPY, test->size);
+		fprintf(stdout, "COPY (%7ld bytes):\t\t", test->size);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	fflush(stdout);
+}
+
+int main(int argc, char **argv)
+{
+	int c;
+	struct pci_test *test;
+
+	test = calloc(1, sizeof(*test));
+	if (!test) {
+		perror("Fail to allocate memory for pci_test\n");
+		return -ENOMEM;
+	}
+
+	/* since '0' is a valid BAR number, initialize it to -1 */
+	test->barnum = -1;
+
+	/* set default size as 100KB */
+	test->size = 0x19000;
+
+	/* set default endpoint device */
+	test->device = "/dev/pci-endpoint-test.0";
+
+	while ((c = getopt(argc, argv, "D:b:m:lrwcs:")) != EOF)
+	switch (c) {
+	case 'D':
+		test->device = optarg;
+		continue;
+	case 'b':
+		test->barnum = atoi(optarg);
+		if (test->barnum < 0 || test->barnum > 5)
+			goto usage;
+		continue;
+	case 'l':
+		test->legacyirq = true;
+		continue;
+	case 'm':
+		test->msinum = atoi(optarg);
+		if (test->msinum < 1 || test->msinum > 32)
+			goto usage;
+		continue;
+	case 'r':
+		test->read = true;
+		continue;
+	case 'w':
+		test->write = true;
+		continue;
+	case 'c':
+		test->copy = true;
+		continue;
+	case 's':
+		test->size = strtoul(optarg, NULL, 0);
+		continue;
+	case '?':
+	case 'h':
+	default:
+usage:
+		fprintf(stderr,
+			"usage: %s [options]\n"
+			"Options:\n"
+			"\t-D <dev>		PCI endpoint test device {default: /dev/pci-endpoint-test.0}\n"
+			"\t-b <bar num>		BAR test (bar number between 0..5)\n"
+			"\t-m <msi num>		MSI test (msi number between 1..32)\n"
+			"\t-r			Read buffer test\n"
+			"\t-w			Write buffer test\n"
+			"\t-c			Copy buffer test\n"
+			"\t-s <size>		Size of buffer {default: 100KB}\n",
+			argv[0]);
+		return -EINVAL;
+	}
+
+	run_test(test);
+	return 0;
+}
diff --git a/tools/pci/pcitest.sh b/tools/pci/pcitest.sh
new file mode 100644
index 000000000000..5442bbea4c22
--- /dev/null
+++ b/tools/pci/pcitest.sh
@@ -0,0 +1,56 @@
+#!/bin/sh
+
+echo "BAR tests"
+echo
+
+bar=0
+
+while [ $bar -lt 6 ]
+do
+	pcitest -b $bar
+	bar=`expr $bar + 1`
+done
+echo
+
+echo "Interrupt tests"
+echo
+
+pcitest -l
+msi=1
+
+while [ $msi -lt 33 ]
+do
+        pcitest -m $msi
+        msi=`expr $msi + 1`
+done
+echo
+
+echo "Read Tests"
+echo
+
+pcitest -r -s 1
+pcitest -r -s 1024
+pcitest -r -s 1025
+pcitest -r -s 1024000
+pcitest -r -s 1024001
+echo
+
+echo "Write Tests"
+echo
+
+pcitest -w -s 1
+pcitest -w -s 1024
+pcitest -w -s 1025
+pcitest -w -s 1024000
+pcitest -w -s 1024001
+echo
+
+echo "Copy Tests"
+echo
+
+pcitest -c -s 1
+pcitest -c -s 1024
+pcitest -c -s 1025
+pcitest -c -s 1024000
+pcitest -c -s 1024001
+echo