Merge tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes, including fixes from mac80211, netfilter and bpf.

  Current release - regressions:

   - bpf, cgroup: assign cgroup in cgroup_sk_alloc when called from
     interrupt

   - mdio: revert mechanical patches which broke handling of optional
     resources

   - dev_addr_list: prevent address duplication

  Previous releases - regressions:

   - sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
     (NULL deref)

   - Revert "mac80211: do not use low data rates for data frames with no
     ack flag", fixing broadcast transmissions

   - mac80211: fix use-after-free in CCMP/GCMP RX

   - netfilter: include zone id in tuple hash again, minimize collisions

   - netfilter: nf_tables: unlink table before deleting it (race -> UAF)

   - netfilter: log: work around missing softdep backend module

   - mptcp: don't return sockets in foreign netns

   - sched: flower: protect fl_walk() with rcu (race -> UAF)

   - ixgbe: fix NULL pointer dereference in ixgbe_xdp_setup

   - smsc95xx: fix stalled rx after link change

   - enetc: fix the incorrect clearing of IF_MODE bits

   - ipv4: fix rtnexthop len when RTA_FLOW is present

   - dsa: mv88e6xxx: 6161: use correct MAX MTU config method for this
     SKU

   - e100: fix length calculation & buffer overrun in ethtool::get_regs

  Previous releases - always broken:

   - mac80211: fix using stale frag_tail skb pointer in A-MSDU tx

   - mac80211: drop frames from invalid MAC address in ad-hoc mode

   - af_unix: fix races in sk_peer_pid and sk_peer_cred accesses (race
     -> UAF)

   - bpf, x86: Fix bpf mapping of atomic fetch implementation

   - bpf: handle return value of BPF_PROG_TYPE_STRUCT_OPS prog

   - netfilter: ip6_tables: zero-initialize fragment offset

   - mhi: fix error path in mhi_net_newlink

   - af_unix: return errno instead of NULL in unix_create1() when over
     the fs.file-max limit

  Misc:

   - bpf: exempt CAP_BPF from checks against bpf_jit_limit

   - netfilter: conntrack: make max chain length random, prevent
     guessing buckets by attackers

   - netfilter: nf_nat_masquerade: make async masq_inet6_event handling
     generic, defer conntrack walk to work queue (prevent hogging RTNL
     lock)"

* tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
  af_unix: fix races in sk_peer_pid and sk_peer_cred accesses
  net: stmmac: fix EEE init issue when paired with EEE capable PHYs
  net: dev_addr_list: handle first address in __hw_addr_add_ex
  net: sched: flower: protect fl_walk() with rcu
  net: introduce and use lock_sock_fast_nested()
  net: phy: bcm7xxx: Fixed indirect MMD operations
  net: hns3: disable firmware compatible features when uninstall PF
  net: hns3: fix always enable rx vlan filter problem after selftest
  net: hns3: PF enable promisc for VF when mac table is overflow
  net: hns3: fix show wrong state when add existing uc mac address
  net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE
  net: hns3: don't rollback when destroy mqprio fail
  net: hns3: remove tc enable checking
  net: hns3: do not allow call hns3_nic_net_open repeatedly
  ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup
  net: bridge: mcast: Associate the seqcount with its protecting lock.
  net: mdio-ipq4019: Fix the error for an optional regs resource
  net: hns3: fix hclge_dbg_dump_tm_pg() stack usage
  net: mdio: mscc-miim: Fix the mdio controller
  af_unix: Return errno instead of NULL in unix_create1().
  ...

5 files changed, 482 insertions, 7 deletions

diff --git a/tools/lib/bpf/linker.c b/tools/lib/bpf/linker.c
index 10911a8cad0f..2df880cefdae 100644
--- a/tools/lib/bpf/linker.c
+++ b/tools/lib/bpf/linker.c
@@ -1649,11 +1649,17 @@ static bool btf_is_non_static(const struct btf_type *t)
 static int find_glob_sym_btf(struct src_obj *obj, Elf64_Sym *sym, const char *sym_name,
 			     int *out_btf_sec_id, int *out_btf_id)
 {
-	int i, j, n = btf__get_nr_types(obj->btf), m, btf_id = 0;
+	int i, j, n, m, btf_id = 0;
 	const struct btf_type *t;
 	const struct btf_var_secinfo *vi;
 	const char *name;
 
+	if (!obj->btf) {
+		pr_warn("failed to find BTF info for object '%s'\n", obj->filename);
+		return -EINVAL;
+	}
+
+	n = btf__get_nr_types(obj->btf);
 	for (i = 1; i <= n; i++) {
 		t = btf__type_by_id(obj->btf, i);
 
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 866531c08e4f..799b88152e9e 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -375,7 +375,8 @@ $(TRUNNER_BPF_OBJS): $(TRUNNER_OUTPUT)/%.o:				\
 		     $(TRUNNER_BPF_PROGS_DIR)/%.c			\
 		     $(TRUNNER_BPF_PROGS_DIR)/*.h			\
 		     $$(INCLUDE_DIR)/vmlinux.h				\
-		     $(wildcard $(BPFDIR)/bpf_*.h) | $(TRUNNER_OUTPUT)
+		     $(wildcard $(BPFDIR)/bpf_*.h)			\
+		     | $(TRUNNER_OUTPUT) $$(BPFOBJ)
 	$$(call $(TRUNNER_BPF_BUILD_RULE),$$<,$$@,			\
 					  $(TRUNNER_BPF_CFLAGS))
 
diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
index 59ea56945e6c..b497bb85b667 100755
--- a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
+++ b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh
@@ -112,6 +112,14 @@ setup()
 	ip netns add "${NS2}"
 	ip netns add "${NS3}"
 
+	# rp_filter gets confused by what these tests are doing, so disable it
+	ip netns exec ${NS1} sysctl -wq net.ipv4.conf.all.rp_filter=0
+	ip netns exec ${NS2} sysctl -wq net.ipv4.conf.all.rp_filter=0
+	ip netns exec ${NS3} sysctl -wq net.ipv4.conf.all.rp_filter=0
+	ip netns exec ${NS1} sysctl -wq net.ipv4.conf.default.rp_filter=0
+	ip netns exec ${NS2} sysctl -wq net.ipv4.conf.default.rp_filter=0
+	ip netns exec ${NS3} sysctl -wq net.ipv4.conf.default.rp_filter=0
+
 	ip link add veth1 type veth peer name veth2
 	ip link add veth3 type veth peer name veth4
 	ip link add veth5 type veth peer name veth6
@@ -236,11 +244,6 @@ setup()
 	ip -netns ${NS1} -6 route add ${IPv6_GRE}/128 dev veth5 via ${IPv6_6} ${VRF}
 	ip -netns ${NS2} -6 route add ${IPv6_GRE}/128 dev veth7 via ${IPv6_8} ${VRF}
 
-	# rp_filter gets confused by what these tests are doing, so disable it
-	ip netns exec ${NS1} sysctl -wq net.ipv4.conf.all.rp_filter=0
-	ip netns exec ${NS2} sysctl -wq net.ipv4.conf.all.rp_filter=0
-	ip netns exec ${NS3} sysctl -wq net.ipv4.conf.all.rp_filter=0
-
 	TMPFILE=$(mktemp /tmp/test_lwt_ip_encap.XXXXXX)
 
 	sleep 1  # reduce flakiness
diff --git a/tools/testing/selftests/netfilter/nft_nat_zones.sh b/tools/testing/selftests/netfilter/nft_nat_zones.sh
new file mode 100755
index 000000000000..b9ab37380f33
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_nat_zones.sh
@@ -0,0 +1,309 @@
+#!/bin/bash
+#
+# Test connection tracking zone and NAT source port reallocation support.
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+# Don't increase too much, 2000 clients should work
+# just fine but script can then take several minutes with
+# KASAN/debug builds.
+maxclients=100
+
+have_iperf=1
+ret=0
+
+# client1---.
+#            veth1-.
+#                  |
+#               NAT Gateway --veth0--> Server
+#                  | |
+#            veth2-' |
+# client2---'        |
+#  ....              |
+# clientX----vethX---'
+
+# All clients share identical IP address.
+# NAT Gateway uses policy routing and conntrack zones to isolate client
+# namespaces.  Each client connects to Server, each with colliding tuples:
+#   clientsaddr:10000 -> serveraddr:dport
+#   NAT Gateway is supposed to do port reallocation for each of the
+#   connections.
+
+sfx=$(mktemp -u "XXXXXXXX")
+gw="ns-gw-$sfx"
+cl1="ns-cl1-$sfx"
+cl2="ns-cl2-$sfx"
+srv="ns-srv-$sfx"
+
+v4gc1=$(sysctl -n net.ipv4.neigh.default.gc_thresh1 2>/dev/null)
+v4gc2=$(sysctl -n net.ipv4.neigh.default.gc_thresh2 2>/dev/null)
+v4gc3=$(sysctl -n net.ipv4.neigh.default.gc_thresh3 2>/dev/null)
+v6gc1=$(sysctl -n net.ipv6.neigh.default.gc_thresh1 2>/dev/null)
+v6gc2=$(sysctl -n net.ipv6.neigh.default.gc_thresh2 2>/dev/null)
+v6gc3=$(sysctl -n net.ipv6.neigh.default.gc_thresh3 2>/dev/null)
+
+cleanup()
+{
+	ip netns del $gw
+	ip netns del $srv
+	for i in $(seq 1 $maxclients); do
+		ip netns del ns-cl$i-$sfx 2>/dev/null
+	done
+
+	sysctl -q net.ipv4.neigh.default.gc_thresh1=$v4gc1 2>/dev/null
+	sysctl -q net.ipv4.neigh.default.gc_thresh2=$v4gc2 2>/dev/null
+	sysctl -q net.ipv4.neigh.default.gc_thresh3=$v4gc3 2>/dev/null
+	sysctl -q net.ipv6.neigh.default.gc_thresh1=$v6gc1 2>/dev/null
+	sysctl -q net.ipv6.neigh.default.gc_thresh2=$v6gc2 2>/dev/null
+	sysctl -q net.ipv6.neigh.default.gc_thresh3=$v6gc3 2>/dev/null
+}
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without nft tool"
+	exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+conntrack -V > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without conntrack tool"
+	exit $ksft_skip
+fi
+
+iperf3 -v >/dev/null 2>&1
+if [ $? -ne 0 ];then
+	have_iperf=0
+fi
+
+ip netns add "$gw"
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not create net namespace $gw"
+	exit $ksft_skip
+fi
+ip -net "$gw" link set lo up
+
+trap cleanup EXIT
+
+ip netns add "$srv"
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not create server netns $srv"
+	exit $ksft_skip
+fi
+
+ip link add veth0 netns "$gw" type veth peer name eth0 netns "$srv"
+ip -net "$gw" link set veth0 up
+ip -net "$srv" link set lo up
+ip -net "$srv" link set eth0 up
+
+sysctl -q net.ipv6.neigh.default.gc_thresh1=512  2>/dev/null
+sysctl -q net.ipv6.neigh.default.gc_thresh2=1024 2>/dev/null
+sysctl -q net.ipv6.neigh.default.gc_thresh3=4096 2>/dev/null
+sysctl -q net.ipv4.neigh.default.gc_thresh1=512  2>/dev/null
+sysctl -q net.ipv4.neigh.default.gc_thresh2=1024 2>/dev/null
+sysctl -q net.ipv4.neigh.default.gc_thresh3=4096 2>/dev/null
+
+for i in $(seq 1 $maxclients);do
+  cl="ns-cl$i-$sfx"
+
+  ip netns add "$cl"
+  if [ $? -ne 0 ];then
+     echo "SKIP: Could not create client netns $cl"
+     exit $ksft_skip
+  fi
+  ip link add veth$i netns "$gw" type veth peer name eth0 netns "$cl" > /dev/null 2>&1
+  if [ $? -ne 0 ];then
+    echo "SKIP: No virtual ethernet pair device support in kernel"
+    exit $ksft_skip
+  fi
+done
+
+for i in $(seq 1 $maxclients);do
+  cl="ns-cl$i-$sfx"
+  echo netns exec "$cl" ip link set lo up
+  echo netns exec "$cl" ip link set eth0 up
+  echo netns exec "$cl" sysctl -q net.ipv4.tcp_syn_retries=2
+  echo netns exec "$gw" ip link set veth$i up
+  echo netns exec "$gw" sysctl -q net.ipv4.conf.veth$i.arp_ignore=2
+  echo netns exec "$gw" sysctl -q net.ipv4.conf.veth$i.rp_filter=0
+
+  # clients have same IP addresses.
+  echo netns exec "$cl" ip addr add 10.1.0.3/24 dev eth0
+  echo netns exec "$cl" ip addr add dead:1::3/64 dev eth0
+  echo netns exec "$cl" ip route add default via 10.1.0.2 dev eth0
+  echo netns exec "$cl" ip route add default via dead:1::2 dev eth0
+
+  # NB: same addresses on client-facing interfaces.
+  echo netns exec "$gw" ip addr add 10.1.0.2/24 dev veth$i
+  echo netns exec "$gw" ip addr add dead:1::2/64 dev veth$i
+
+  # gw: policy routing
+  echo netns exec "$gw" ip route add 10.1.0.0/24 dev veth$i table $((1000+i))
+  echo netns exec "$gw" ip route add dead:1::0/64 dev veth$i table $((1000+i))
+  echo netns exec "$gw" ip route add 10.3.0.0/24 dev veth0 table $((1000+i))
+  echo netns exec "$gw" ip route add dead:3::0/64 dev veth0 table $((1000+i))
+  echo netns exec "$gw" ip rule add fwmark $i lookup $((1000+i))
+done | ip -batch /dev/stdin
+
+ip -net "$gw" addr add 10.3.0.1/24 dev veth0
+ip -net "$gw" addr add dead:3::1/64 dev veth0
+
+ip -net "$srv" addr add 10.3.0.99/24 dev eth0
+ip -net "$srv" addr add dead:3::99/64 dev eth0
+
+ip netns exec $gw nft -f /dev/stdin<<EOF
+table inet raw {
+	map iiftomark {
+		type ifname : mark
+	}
+
+	map iiftozone {
+		typeof iifname : ct zone
+	}
+
+	set inicmp {
+		flags dynamic
+		type ipv4_addr . ifname . ipv4_addr
+	}
+	set inflows {
+		flags dynamic
+		type ipv4_addr . inet_service . ifname . ipv4_addr . inet_service
+	}
+
+	set inflows6 {
+		flags dynamic
+		type ipv6_addr . inet_service . ifname . ipv6_addr . inet_service
+	}
+
+	chain prerouting {
+		type filter hook prerouting priority -64000; policy accept;
+		ct original zone set meta iifname map @iiftozone
+		meta mark set meta iifname map @iiftomark
+
+		tcp flags & (syn|ack) == ack add @inflows { ip saddr . tcp sport . meta iifname . ip daddr . tcp dport counter }
+		add @inflows6 { ip6 saddr . tcp sport . meta iifname . ip6 daddr . tcp dport counter }
+		ip protocol icmp add @inicmp { ip saddr . meta iifname . ip daddr counter }
+	}
+
+	chain nat_postrouting {
+		type nat hook postrouting priority 0; policy accept;
+                ct mark set meta mark meta oifname veth0 masquerade
+	}
+
+	chain mangle_prerouting {
+		type filter hook prerouting priority -100; policy accept;
+		ct direction reply meta mark set ct mark
+	}
+}
+EOF
+
+( echo add element inet raw iiftomark \{
+	for i in $(seq 1 $((maxclients-1))); do
+		echo \"veth$i\" : $i,
+	done
+	echo \"veth$maxclients\" : $maxclients \}
+	echo add element inet raw iiftozone \{
+	for i in $(seq 1 $((maxclients-1))); do
+		echo \"veth$i\" : $i,
+	done
+	echo \"veth$maxclients\" : $maxclients \}
+) | ip netns exec $gw nft -f /dev/stdin
+
+ip netns exec "$gw" sysctl -q net.ipv4.conf.all.forwarding=1 > /dev/null
+ip netns exec "$gw" sysctl -q net.ipv6.conf.all.forwarding=1 > /dev/null
+ip netns exec "$gw" sysctl -q net.ipv4.conf.all.rp_filter=0 >/dev/null
+
+# useful for debugging: allows to use 'ping' from clients to gateway.
+ip netns exec "$gw" sysctl -q net.ipv4.fwmark_reflect=1 > /dev/null
+ip netns exec "$gw" sysctl -q net.ipv6.fwmark_reflect=1 > /dev/null
+
+for i in $(seq 1 $maxclients); do
+  cl="ns-cl$i-$sfx"
+  ip netns exec $cl ping -i 0.5 -q -c 3 10.3.0.99 > /dev/null 2>&1 &
+  if [ $? -ne 0 ]; then
+     echo FAIL: Ping failure from $cl 1>&2
+     ret=1
+     break
+  fi
+done
+
+wait
+
+for i in $(seq 1 $maxclients); do
+   ip netns exec $gw nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" | grep -q "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 counter packets 3 bytes 252 }"
+   if [ $? -ne 0 ];then
+      ret=1
+      echo "FAIL: counter icmp mismatch for veth$i" 1>&2
+      ip netns exec $gw nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" 1>&2
+      break
+   fi
+done
+
+ip netns exec $gw nft get element inet raw inicmp "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 }" | grep -q "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * $maxclients)) bytes $((252 * $maxclients)) }"
+if [ $? -ne 0 ];then
+    ret=1
+    echo "FAIL: counter icmp mismatch for veth0: { 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * $maxclients)) bytes $((252 * $maxclients)) }"
+    ip netns exec $gw nft get element inet raw inicmp "{ 10.3.99 . \"veth0\" . 10.3.0.1 }" 1>&2
+fi
+
+if  [ $ret -eq 0 ]; then
+	echo "PASS: ping test from all $maxclients namespaces"
+fi
+
+if [ $have_iperf -eq 0 ];then
+	echo "SKIP: iperf3 not installed"
+	if [ $ret -ne 0 ];then
+	    exit $ret
+	fi
+	exit $ksft_skip
+fi
+
+ip netns exec $srv iperf3 -s > /dev/null 2>&1 &
+iperfpid=$!
+sleep 1
+
+for i in $(seq 1 $maxclients); do
+  if [ $ret -ne 0 ]; then
+     break
+  fi
+  cl="ns-cl$i-$sfx"
+  ip netns exec $cl iperf3 -c 10.3.0.99 --cport 10000 -n 1 > /dev/null
+  if [ $? -ne 0 ]; then
+     echo FAIL: Failure to connect for $cl 1>&2
+     ip netns exec $gw conntrack -S 1>&2
+     ret=1
+  fi
+done
+if [ $ret -eq 0 ];then
+	echo "PASS: iperf3 connections for all $maxclients net namespaces"
+fi
+
+kill $iperfpid
+wait
+
+for i in $(seq 1 $maxclients); do
+   ip netns exec $gw nft get element inet raw inflows "{ 10.1.0.3 . 10000 . \"veth$i\" . 10.3.0.99 . 5201 }" > /dev/null
+   if [ $? -ne 0 ];then
+      ret=1
+      echo "FAIL: can't find expected tcp entry for veth$i" 1>&2
+      break
+   fi
+done
+if [ $ret -eq 0 ];then
+	echo "PASS: Found client connection for all $maxclients net namespaces"
+fi
+
+ip netns exec $gw nft get element inet raw inflows "{ 10.3.0.99 . 5201 . \"veth0\" . 10.3.0.1 . 10000 }" > /dev/null
+if [ $? -ne 0 ];then
+    ret=1
+    echo "FAIL: cannot find return entry on veth0" 1>&2
+fi
+
+exit $ret
diff --git a/tools/testing/selftests/netfilter/nft_zones_many.sh b/tools/testing/selftests/netfilter/nft_zones_many.sh
new file mode 100755
index 000000000000..ac646376eb01
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_zones_many.sh
@@ -0,0 +1,156 @@
+#!/bin/bash
+
+# Test insertion speed for packets with identical addresses/ports
+# that are all placed in distinct conntrack zones.
+
+sfx=$(mktemp -u "XXXXXXXX")
+ns="ns-$sfx"
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+zones=20000
+have_ct_tool=0
+ret=0
+
+cleanup()
+{
+	ip netns del $ns
+}
+
+ip netns add $ns
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not create net namespace $gw"
+	exit $ksft_skip
+fi
+
+trap cleanup EXIT
+
+conntrack -V > /dev/null 2>&1
+if [ $? -eq 0 ];then
+	have_ct_tool=1
+fi
+
+ip -net "$ns" link set lo up
+
+test_zones() {
+	local max_zones=$1
+
+ip netns exec $ns sysctl -q net.netfilter.nf_conntrack_udp_timeout=3600
+ip netns exec $ns nft -f /dev/stdin<<EOF
+flush ruleset
+table inet raw {
+	map rndzone {
+		typeof numgen inc mod $max_zones : ct zone
+	}
+
+	chain output {
+		type filter hook output priority -64000; policy accept;
+		udp dport 12345  ct zone set numgen inc mod 65536 map @rndzone
+	}
+}
+EOF
+	(
+		echo "add element inet raw rndzone {"
+	for i in $(seq 1 $max_zones);do
+		echo -n "$i : $i"
+		if [ $i -lt $max_zones ]; then
+			echo ","
+		else
+			echo "}"
+		fi
+	done
+	) | ip netns exec $ns nft -f /dev/stdin
+
+	local i=0
+	local j=0
+	local outerstart=$(date +%s%3N)
+	local stop=$outerstart
+
+	while [ $i -lt $max_zones ]; do
+		local start=$(date +%s%3N)
+		i=$((i + 10000))
+		j=$((j + 1))
+		dd if=/dev/zero of=/dev/stdout bs=8k count=10000 2>/dev/null | ip netns exec "$ns" nc -w 1 -q 1 -u -p 12345 127.0.0.1 12345 > /dev/null
+		if [ $? -ne 0 ] ;then
+			ret=1
+			break
+		fi
+
+		stop=$(date +%s%3N)
+		local duration=$((stop-start))
+		echo "PASS: added 10000 entries in $duration ms (now $i total, loop $j)"
+	done
+
+	if [ $have_ct_tool -eq 1 ]; then
+		local count=$(ip netns exec "$ns" conntrack -C)
+		local duration=$((stop-outerstart))
+
+		if [ $count -eq $max_zones ]; then
+			echo "PASS: inserted $count entries from packet path in $duration ms total"
+		else
+			ip netns exec $ns conntrack -S 1>&2
+			echo "FAIL: inserted $count entries from packet path in $duration ms total, expected $max_zones entries"
+			ret=1
+		fi
+	fi
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: insert $max_zones entries from packet path" 1>&2
+	fi
+}
+
+test_conntrack_tool() {
+	local max_zones=$1
+
+	ip netns exec $ns conntrack -F >/dev/null 2>/dev/null
+
+	local outerstart=$(date +%s%3N)
+	local start=$(date +%s%3N)
+	local stop=$start
+	local i=0
+	while [ $i -lt $max_zones ]; do
+		i=$((i + 1))
+		ip netns exec "$ns" conntrack -I -s 1.1.1.1 -d 2.2.2.2 --protonum 6 \
+	                 --timeout 3600 --state ESTABLISHED --sport 12345 --dport 1000 --zone $i >/dev/null 2>&1
+		if [ $? -ne 0 ];then
+			ip netns exec "$ns" conntrack -I -s 1.1.1.1 -d 2.2.2.2 --protonum 6 \
+	                 --timeout 3600 --state ESTABLISHED --sport 12345 --dport 1000 --zone $i > /dev/null
+			echo "FAIL: conntrack -I returned an error"
+			ret=1
+			break
+		fi
+
+		if [ $((i%10000)) -eq 0 ];then
+			stop=$(date +%s%3N)
+
+			local duration=$((stop-start))
+			echo "PASS: added 10000 entries in $duration ms (now $i total)"
+			start=$stop
+		fi
+	done
+
+	local count=$(ip netns exec "$ns" conntrack -C)
+	local duration=$((stop-outerstart))
+
+	if [ $count -eq $max_zones ]; then
+		echo "PASS: inserted $count entries via ctnetlink in $duration ms"
+	else
+		ip netns exec $ns conntrack -S 1>&2
+		echo "FAIL: inserted $count entries via ctnetlink in $duration ms, expected $max_zones entries ($duration ms)"
+		ret=1
+	fi
+}
+
+test_zones $zones
+
+if [ $have_ct_tool -eq 1 ];then
+	test_conntrack_tool $zones
+else
+	echo "SKIP: Could not run ctnetlink insertion test without conntrack tool"
+	if [ $ret -eq 0 ];then
+		exit $ksft_skip
+	fi
+fi
+
+exit $ret