torture: Extract kvm-test-1-run-qemu.sh from kvm-test-1-run.sh

Currently, kvm-test-1-run.sh both builds and runs an rcutorture kernel,
which is inconvenient when it is necessary to re-run an old run or to
carry out a run on a remote system.  This commit therefore extracts the
portion of kvm-test-1-run.sh that invoke qemu to actually run rcutorture
and places it in kvm-test-1-run-qemu.sh.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

2 files changed, 171 insertions, 126 deletions

diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh
new file mode 100755
index 000000000000..6b0d71b325eb
--- /dev/null
+++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh
@@ -0,0 +1,170 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Carry out a kvm-based run for the specified qemu-cmd file, which might
+# have been generated by --build-only kvm.sh run.
+#
+# Usage: kvm-test-1-run-qemu.sh qemu-cmd-dir
+#
+# qemu-cmd-dir provides the directory containing qemu-cmd file.
+#	This is assumed to be of the form prefix/ds/scenario, where
+#	"ds" is the top-level date-stamped directory and "scenario"
+#	is the scenario name.  Any required adjustments to this file
+#	must have been made by the caller.  The shell-command comments
+#	at the end of the qemu-cmd file are not optional.
+#
+# Copyright (C) 2021 Facebook, Inc.
+#
+# Authors: Paul E. McKenney <paulmck@kernel.org>
+
+T=${TMPDIR-/tmp}/kvm-test-1-run-qemu.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+resdir="$1"
+if ! test -d "$resdir"
+then
+	echo $0: Nonexistent directory: $resdir
+	exit 1
+fi
+if ! test -f "$resdir/qemu-cmd"
+then
+	echo $0: Nonexistent qemu-cmd file: $resdir/qemu-cmd
+	exit 1
+fi
+
+# Obtain settings from the qemu-cmd file.
+grep '^#' $resdir/qemu-cmd | sed -e 's/^# //' > $T/qemu-cmd-settings
+. $T/qemu-cmd-settings
+
+# Decorate qemu-cmd with redirection, backgrounding, and PID capture
+sed -e 's/$/ 2>\&1 \&/' < $resdir/qemu-cmd > $T/qemu-cmd
+echo 'echo $! > $resdir/qemu_pid' >> $T/qemu-cmd
+
+# In case qemu refuses to run...
+echo "NOTE: $QEMU either did not run or was interactive" > $resdir/console.log
+
+# Attempt to run qemu
+kstarttime=`gawk 'BEGIN { print systime() }' < /dev/null`
+( . $T/qemu-cmd; wait `cat  $resdir/qemu_pid`; echo $? > $resdir/qemu-retval ) &
+commandcompleted=0
+if test -z "$TORTURE_KCONFIG_GDB_ARG"
+then
+	sleep 10 # Give qemu's pid a chance to reach the file
+	if test -s "$resdir/qemu_pid"
+	then
+		qemu_pid=`cat "$resdir/qemu_pid"`
+		echo Monitoring qemu job at pid $qemu_pid
+	else
+		qemu_pid=""
+		echo Monitoring qemu job at yet-as-unknown pid
+	fi
+fi
+if test -n "$TORTURE_KCONFIG_GDB_ARG"
+then
+	base_resdir=`echo $resdir | sed -e 's/\.[0-9]\+$//'`
+	if ! test -f $base_resdir/vmlinux
+	then
+		base_resdir=/path/to
+	fi
+	echo Waiting for you to attach a debug session, for example: > /dev/tty
+	echo "    gdb $base_resdir/vmlinux" > /dev/tty
+	echo 'After symbols load and the "(gdb)" prompt appears:' > /dev/tty
+	echo "    target remote :1234" > /dev/tty
+	echo "    continue" > /dev/tty
+	kstarttime=`gawk 'BEGIN { print systime() }' < /dev/null`
+fi
+while :
+do
+	if test -z "$qemu_pid" -a -s "$resdir/qemu_pid"
+	then
+		qemu_pid=`cat "$resdir/qemu_pid"`
+	fi
+	kruntime=`gawk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null`
+	if test -z "$qemu_pid" || kill -0 "$qemu_pid" > /dev/null 2>&1
+	then
+		if test -n "$TORTURE_KCONFIG_GDB_ARG"
+		then
+			:
+		elif test $kruntime -ge $seconds || test -f "$resdir/../STOP.1"
+		then
+			break;
+		fi
+		sleep 1
+	else
+		commandcompleted=1
+		if test $kruntime -lt $seconds
+		then
+			echo Completed in $kruntime vs. $seconds >> $resdir/Warnings 2>&1
+			grep "^(qemu) qemu:" $resdir/kvm-test-1-run.sh.out >> $resdir/Warnings 2>&1
+			killpid="`sed -n "s/^(qemu) qemu: terminating on signal [0-9]* from pid \([0-9]*\).*$/\1/p" $resdir/Warnings`"
+			if test -n "$killpid"
+			then
+				echo "ps -fp $killpid" >> $resdir/Warnings 2>&1
+				ps -fp $killpid >> $resdir/Warnings 2>&1
+			fi
+		else
+			echo ' ---' `date`: "Kernel done"
+		fi
+		break
+	fi
+done
+if test -z "$qemu_pid" -a -s "$resdir/qemu_pid"
+then
+	qemu_pid=`cat "$resdir/qemu_pid"`
+fi
+if test $commandcompleted -eq 0 -a -n "$qemu_pid"
+then
+	if ! test -f "$resdir/../STOP.1"
+	then
+		echo Grace period for qemu job at pid $qemu_pid
+	fi
+	oldline="`tail $resdir/console.log`"
+	while :
+	do
+		if test -f "$resdir/../STOP.1"
+		then
+			echo "PID $qemu_pid killed due to run STOP.1 request" >> $resdir/Warnings 2>&1
+			kill -KILL $qemu_pid
+			break
+		fi
+		kruntime=`gawk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null`
+		if kill -0 $qemu_pid > /dev/null 2>&1
+		then
+			:
+		else
+			break
+		fi
+		must_continue=no
+		newline="`tail $resdir/console.log`"
+		if test "$newline" != "$oldline" && echo $newline | grep -q ' [0-9]\+us : '
+		then
+			must_continue=yes
+		fi
+		last_ts="`tail $resdir/console.log | grep '^\[ *[0-9]\+\.[0-9]\+]' | tail -1 | sed -e 's/^\[ *//' -e 's/\..*$//'`"
+		if test -z "$last_ts"
+		then
+			last_ts=0
+		fi
+		if test "$newline" != "$oldline" -a "$last_ts" -lt $((seconds + $TORTURE_SHUTDOWN_GRACE))
+		then
+			must_continue=yes
+		fi
+		if test $must_continue = no -a $kruntime -ge $((seconds + $TORTURE_SHUTDOWN_GRACE))
+		then
+			echo "!!! PID $qemu_pid hung at $kruntime vs. $seconds seconds" >> $resdir/Warnings 2>&1
+			kill -KILL $qemu_pid
+			break
+		fi
+		oldline=$newline
+		sleep 10
+	done
+elif test -z "$qemu_pid"
+then
+	echo Unknown PID, cannot kill qemu command
+fi
+
+# Tell the script that this run is done.
+rm -f $resdir/build.run
+
+parse-console.sh $resdir/console.log $title
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
index 5d9ac90c2cfb..f3d2ded0c8cf 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
@@ -210,129 +210,4 @@ then
 	exit 0
 fi
 
-# Decorate qemu-cmd with redirection, backgrounding, and PID capture
-sed -e 's/$/ 2>\&1 \&/' < $resdir/qemu-cmd > $T/qemu-cmd
-echo 'echo $! > $resdir/qemu_pid' >> $T/qemu-cmd
-
-# In case qemu refuses to run...
-echo "NOTE: $QEMU either did not run or was interactive" > $resdir/console.log
-
-# Attempt to run qemu
-kstarttime=`gawk 'BEGIN { print systime() }' < /dev/null`
-( . $T/qemu-cmd; wait `cat  $resdir/qemu_pid`; echo $? > $resdir/qemu-retval ) &
-commandcompleted=0
-if test -z "$TORTURE_KCONFIG_GDB_ARG"
-then
-	sleep 10 # Give qemu's pid a chance to reach the file
-	if test -s "$resdir/qemu_pid"
-	then
-		qemu_pid=`cat "$resdir/qemu_pid"`
-		echo Monitoring qemu job at pid $qemu_pid
-	else
-		qemu_pid=""
-		echo Monitoring qemu job at yet-as-unknown pid
-	fi
-fi
-if test -n "$TORTURE_KCONFIG_GDB_ARG"
-then
-	echo Waiting for you to attach a debug session, for example: > /dev/tty
-	echo "    gdb $base_resdir/vmlinux" > /dev/tty
-	echo 'After symbols load and the "(gdb)" prompt appears:' > /dev/tty
-	echo "    target remote :1234" > /dev/tty
-	echo "    continue" > /dev/tty
-	kstarttime=`gawk 'BEGIN { print systime() }' < /dev/null`
-fi
-while :
-do
-	if test -z "$qemu_pid" -a -s "$resdir/qemu_pid"
-	then
-		qemu_pid=`cat "$resdir/qemu_pid"`
-	fi
-	kruntime=`gawk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null`
-	if test -z "$qemu_pid" || kill -0 "$qemu_pid" > /dev/null 2>&1
-	then
-		if test -n "$TORTURE_KCONFIG_GDB_ARG"
-		then
-			:
-		elif test $kruntime -ge $seconds || test -f "$resdir/../STOP.1"
-		then
-			break;
-		fi
-		sleep 1
-	else
-		commandcompleted=1
-		if test $kruntime -lt $seconds
-		then
-			echo Completed in $kruntime vs. $seconds >> $resdir/Warnings 2>&1
-			grep "^(qemu) qemu:" $resdir/kvm-test-1-run.sh.out >> $resdir/Warnings 2>&1
-			killpid="`sed -n "s/^(qemu) qemu: terminating on signal [0-9]* from pid \([0-9]*\).*$/\1/p" $resdir/Warnings`"
-			if test -n "$killpid"
-			then
-				echo "ps -fp $killpid" >> $resdir/Warnings 2>&1
-				ps -fp $killpid >> $resdir/Warnings 2>&1
-			fi
-		else
-			echo ' ---' `date`: "Kernel done"
-		fi
-		break
-	fi
-done
-if test -z "$qemu_pid" -a -s "$resdir/qemu_pid"
-then
-	qemu_pid=`cat "$resdir/qemu_pid"`
-fi
-if test $commandcompleted -eq 0 -a -n "$qemu_pid"
-then
-	if ! test -f "$resdir/../STOP.1"
-	then
-		echo Grace period for qemu job at pid $qemu_pid
-	fi
-	oldline="`tail $resdir/console.log`"
-	while :
-	do
-		if test -f "$resdir/../STOP.1"
-		then
-			echo "PID $qemu_pid killed due to run STOP.1 request" >> $resdir/Warnings 2>&1
-			kill -KILL $qemu_pid
-			break
-		fi
-		kruntime=`gawk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null`
-		if kill -0 $qemu_pid > /dev/null 2>&1
-		then
-			:
-		else
-			break
-		fi
-		must_continue=no
-		newline="`tail $resdir/console.log`"
-		if test "$newline" != "$oldline" && echo $newline | grep -q ' [0-9]\+us : '
-		then
-			must_continue=yes
-		fi
-		last_ts="`tail $resdir/console.log | grep '^\[ *[0-9]\+\.[0-9]\+]' | tail -1 | sed -e 's/^\[ *//' -e 's/\..*$//'`"
-		if test -z "$last_ts"
-		then
-			last_ts=0
-		fi
-		if test "$newline" != "$oldline" -a "$last_ts" -lt $((seconds + $TORTURE_SHUTDOWN_GRACE))
-		then
-			must_continue=yes
-		fi
-		if test $must_continue = no -a $kruntime -ge $((seconds + $TORTURE_SHUTDOWN_GRACE))
-		then
-			echo "!!! PID $qemu_pid hung at $kruntime vs. $seconds seconds" >> $resdir/Warnings 2>&1
-			kill -KILL $qemu_pid
-			break
-		fi
-		oldline=$newline
-		sleep 10
-	done
-elif test -z "$qemu_pid"
-then
-	echo Unknown PID, cannot kill qemu command
-fi
-
-# Tell the script that this run is done.
-rm -f $resdir/build.run
-
-parse-console.sh $resdir/console.log $title
+kvm-test-1-run-qemu.sh $resdir