diff options
| -rw-r--r-- | drivers/ata/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/ata/ata_piix.c | 2 | ||||
| -rw-r--r-- | drivers/ata/libata-core.c | 74 | ||||
| -rw-r--r-- | drivers/ata/libata-eh.c | 96 | ||||
| -rw-r--r-- | drivers/ata/libata-sff.c | 288 | ||||
| -rw-r--r-- | drivers/ata/pata_hpt3x3.c | 93 | ||||
| -rw-r--r-- | drivers/ata/pata_mpc52xx.c | 18 | ||||
| -rw-r--r-- | drivers/ata/pata_scc.c | 54 | ||||
| -rw-r--r-- | drivers/ata/pata_sis.c | 3 | ||||
| -rw-r--r-- | drivers/ata/sata_mv.c | 887 | ||||
| -rw-r--r-- | drivers/ata/sata_nv.c | 2 | ||||
| -rw-r--r-- | drivers/ata/sata_promise.c | 41 | ||||
| -rw-r--r-- | drivers/ata/sata_sis.c | 2 | ||||
| -rw-r--r-- | drivers/ata/sata_uli.c | 2 | ||||
| -rw-r--r-- | drivers/ata/sata_via.c | 2 | ||||
| -rw-r--r-- | include/linux/ata.h | 29 | ||||
| -rw-r--r-- | include/linux/libata.h | 12 |
17 files changed, 890 insertions, 725 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 4ad8675f5a16..d8046a113c37 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -309,7 +309,7 @@ config PATA_HPT3X2N If unsure, say N. config PATA_HPT3X3 - tristate "HPT 343/363 PATA support (Experimental)" + tristate "HPT 343/363 PATA support" depends on PCI help This option enables support for the HPT 343/363 @@ -317,6 +317,14 @@ config PATA_HPT3X3 If unsure, say N. +config PATA_HPT3X3_DMA + bool "HPT 343/363 DMA support (Experimental)" + depends on PATA_HPT3X3 + help + This option enables DMA support for the HPT343/363 + controllers. Enable with care as there are still some + problems with DMA on this chipset. + config PATA_ISAPNP tristate "ISA Plug and Play PATA support (Experimental)" depends on EXPERIMENTAL && ISAPNP diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 6a3bfef58e13..21a7ca4936b4 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -414,7 +414,7 @@ static const struct piix_map_db ich6m_map_db = { */ .map = { /* PM PS SM SS MAP */ - { P0, P2, RV, RV }, /* 00b */ + { P0, P2, NA, NA }, /* 00b */ { IDE, IDE, P1, P3 }, /* 01b */ { P0, P2, IDE, IDE }, /* 10b */ { RV, RV, RV, RV }, diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 5b25311ba885..88e2dd0983b5 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -71,6 +71,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev, u16 heads, u16 sectors); static unsigned int ata_dev_set_xfermode(struct ata_device *dev); static void ata_dev_xfermask(struct ata_device *dev); +static unsigned long ata_dev_blacklisted(const struct ata_device *dev); unsigned int ata_print_id = 1; static struct workqueue_struct *ata_wq; @@ -1283,18 +1284,11 @@ static unsigned int ata_id_xfermask(const u16 *id) void ata_port_queue_task(struct ata_port *ap, work_func_t fn, void *data, unsigned long delay) { - int rc; - - if (ap->pflags & ATA_PFLAG_FLUSH_PORT_TASK) - return; - PREPARE_DELAYED_WORK(&ap->port_task, fn); ap->port_task_data = data; - rc = queue_delayed_work(ata_wq, &ap->port_task, delay); - - /* rc == 0 means that another user is using port task */ - WARN_ON(rc == 0); + /* may fail if ata_port_flush_task() in progress */ + queue_delayed_work(ata_wq, &ap->port_task, delay); } /** @@ -1309,32 +1303,9 @@ void ata_port_queue_task(struct ata_port *ap, work_func_t fn, void *data, */ void ata_port_flush_task(struct ata_port *ap) { - unsigned long flags; - DPRINTK("ENTER\n"); - spin_lock_irqsave(ap->lock, flags); - ap->pflags |= ATA_PFLAG_FLUSH_PORT_TASK; - spin_unlock_irqrestore(ap->lock, flags); - - DPRINTK("flush #1\n"); - cancel_work_sync(&ap->port_task.work); /* akpm: seems unneeded */ - - /* - * At this point, if a task is running, it's guaranteed to see - * the FLUSH flag; thus, it will never queue pio tasks again. - * Cancel and flush. - */ - if (!cancel_delayed_work(&ap->port_task)) { - if (ata_msg_ctl(ap)) - ata_port_printk(ap, KERN_DEBUG, "%s: flush #2\n", - __FUNCTION__); - cancel_work_sync(&ap->port_task.work); - } - - spin_lock_irqsave(ap->lock, flags); - ap->pflags &= ~ATA_PFLAG_FLUSH_PORT_TASK; - spin_unlock_irqrestore(ap->lock, flags); + cancel_rearming_delayed_work(&ap->port_task); if (ata_msg_ctl(ap)) ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__); @@ -1814,7 +1785,7 @@ static void ata_dev_config_ncq(struct ata_device *dev, desc[0] = '\0'; return; } - if (ata_device_blacklisted(dev) & ATA_HORKAGE_NONCQ) { + if (dev->horkage & ATA_HORKAGE_NONCQ) { snprintf(desc, desc_sz, "NCQ (not used)"); return; } @@ -1863,6 +1834,9 @@ int ata_dev_configure(struct ata_device *dev) if (ata_msg_probe(ap)) ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__); + /* set horkage */ + dev->horkage |= ata_dev_blacklisted(dev); + /* let ACPI work its magic */ rc = ata_acpi_on_devcfg(dev); if (rc) @@ -2038,7 +2012,7 @@ int ata_dev_configure(struct ata_device *dev) dev->max_sectors = ATA_MAX_SECTORS; } - if (ata_device_blacklisted(dev) & ATA_HORKAGE_MAX_SEC_128) + if (dev->horkage & ATA_HORKAGE_MAX_SEC_128) dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, dev->max_sectors); @@ -3190,9 +3164,6 @@ void ata_bus_reset(struct ata_port *ap) if ((slave_possible) && (err != 0x81)) ap->device[1].class = ata_dev_try_classify(ap, 1, &err); - /* re-enable interrupts */ - ap->ops->irq_on(ap); - /* is double-select really necessary? */ if (ap->device[1].class != ATA_DEV_NONE) ap->ops->dev_select(ap, 1); @@ -3577,10 +3548,6 @@ void ata_std_postreset(struct ata_port *ap, unsigned int *classes) if (sata_scr_read(ap, SCR_ERROR, &serror) == 0) sata_scr_write(ap, SCR_ERROR, serror); - /* re-enable interrupts */ - if (!ap->ops->error_handler) - ap->ops->irq_on(ap); - /* is double-select really necessary? */ if (classes[0] != ATA_DEV_NONE) ap->ops->dev_select(ap, 1); @@ -3770,6 +3737,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA }, { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA }, { "IOMEGA ZIP 250 ATAPI", NULL, ATA_HORKAGE_NODMA }, /* temporary fix */ + { "IOMEGA ZIP 250 ATAPI Floppy", + NULL, ATA_HORKAGE_NODMA }, /* Weird ATAPI devices */ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 }, @@ -3783,7 +3752,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ }, /* NCQ is broken */ { "Maxtor 6L250S0", "BANC1G10", ATA_HORKAGE_NONCQ }, + { "Maxtor 6B200M0", "BANC1BM0", ATA_HORKAGE_NONCQ }, { "Maxtor 6B200M0", "BANC1B10", ATA_HORKAGE_NONCQ }, + { "HITACHI HDS7250SASUN500G 0621KTAWSD", "K2AOAJ0AHITACHI", + ATA_HORKAGE_NONCQ }, /* NCQ hard hangs device under heavier load, needs hard power cycle */ { "Maxtor 6B250S0", "BANC1B70", ATA_HORKAGE_NONCQ }, /* Blacklist entries taken from Silicon Image 3124/3132 @@ -3796,6 +3768,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "HTS541612J9SA00", "SBDIC7JP", ATA_HORKAGE_NONCQ, }, { "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ, }, { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, }, + { "FUJITSU MHV2080BH", "00840028", ATA_HORKAGE_NONCQ, }, /* Devices with NCQ limits */ @@ -3803,7 +3776,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { } }; -unsigned long ata_device_blacklisted(const struct ata_device *dev) +static unsigned long ata_dev_blacklisted(const struct ata_device *dev) { unsigned char model_num[ATA_ID_PROD_LEN + 1]; unsigned char model_rev[ATA_ID_FW_REV_LEN + 1]; @@ -3833,7 +3806,7 @@ static int ata_dma_blacklisted(const struct ata_device *dev) if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) && (dev->flags & ATA_DFLAG_CDB_INTR)) return 1; - return (ata_device_blacklisted(dev) & ATA_HORKAGE_NODMA) ? 1 : 0; + return (dev->horkage & ATA_HORKAGE_NODMA) ? 1 : 0; } /** @@ -6557,13 +6530,7 @@ void ata_port_detach(struct ata_port *ap) spin_unlock_irqrestore(ap->lock, flags); ata_port_wait_eh(ap); - - /* Flush hotplug task. The sequence is similar to - * ata_port_flush_task(). - */ - cancel_work_sync(&ap->hotplug_task.work); /* akpm: why? */ - cancel_delayed_work(&ap->hotplug_task); - cancel_work_sync(&ap->hotplug_task.work); + cancel_rearming_delayed_work(&ap->hotplug_task); skip_eh: /* remove the associated SCSI host */ @@ -6952,7 +6919,6 @@ EXPORT_SYMBOL_GPL(ata_host_resume); EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_id_to_dma_mode); -EXPORT_SYMBOL_GPL(ata_device_blacklisted); EXPORT_SYMBOL_GPL(ata_scsi_simulate); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); @@ -6961,9 +6927,9 @@ EXPORT_SYMBOL_GPL(ata_timing_merge); #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); -EXPORT_SYMBOL_GPL(ata_pci_init_native_host); +EXPORT_SYMBOL_GPL(ata_pci_init_sff_host); EXPORT_SYMBOL_GPL(ata_pci_init_bmdma); -EXPORT_SYMBOL_GPL(ata_pci_prepare_native_host); +EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host); EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); #ifdef CONFIG_PM diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 9ee0a8c08d96..9aa62a0754f6 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1897,6 +1897,57 @@ static int ata_eh_skip_recovery(struct ata_port *ap) return 1; } +static void ata_eh_handle_dev_fail(struct ata_device *dev, int err) +{ + struct ata_port *ap = dev->ap; + struct ata_eh_context *ehc = &ap->eh_context; + + ehc->tries[dev->devno]--; + + switch (err) { + case -ENODEV: + /* device missing or wrong IDENTIFY data, schedule probing */ + ehc->i.probe_mask |= (1 << dev->devno); + case -EINVAL: + /* give it just one more chance */ + ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1); + case -EIO: + if (ehc->tries[dev->devno] == 1) { + /* This is the last chance, better to slow + * down than lose it. + */ + sata_down_spd_limit(ap); + ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); + } + } + + if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) { + /* disable device if it has used up all its chances */ + ata_dev_disable(dev); + + /* detach if offline */ + if (ata_port_offline(ap)) + ata_eh_detach_dev(dev); + + /* probe if requested */ + if ((ehc->i.probe_mask & (1 << dev->devno)) && + !(ehc->did_probe_mask & (1 << dev->devno))) { + ata_eh_detach_dev(dev); + ata_dev_init(dev); + + ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; + ehc->did_probe_mask |= (1 << dev->devno); + ehc->i.action |= ATA_EH_SOFTRESET; + } + } else { + /* soft didn't work? be haaaaard */ + if (ehc->i.flags & ATA_EHI_DID_RESET) + ehc->i.action |= ATA_EH_HARDRESET; + else + ehc->i.action |= ATA_EH_SOFTRESET; + } +} + /** * ata_eh_recover - recover host port after error * @ap: host port to recover @@ -1997,50 +2048,7 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, goto out; dev_fail: - ehc->tries[dev->devno]--; - - switch (rc) { - case -ENODEV: - /* device missing or wrong IDENTIFY data, schedule probing */ - ehc->i.probe_mask |= (1 << dev->devno); - case -EINVAL: - /* give it just one more chance */ - ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1); - case -EIO: - if (ehc->tries[dev->devno] == 1) { - /* This is the last chance, better to slow - * down than lose it. - */ - sata_down_spd_limit(ap); - ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); - } - } - - if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) { - /* disable device if it has used up all its chances */ - ata_dev_disable(dev); - - /* detach if offline */ - if (ata_port_offline(ap)) - ata_eh_detach_dev(dev); - - /* probe if requested */ - if ((ehc->i.probe_mask & (1 << dev->devno)) && - !(ehc->did_probe_mask & (1 << dev->devno))) { - ata_eh_detach_dev(dev); - ata_dev_init(dev); - - ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; - ehc->did_probe_mask |= (1 << dev->devno); - ehc->i.action |= ATA_EH_SOFTRESET; - } - } else { - /* soft didn't work? be haaaaard */ - if (ehc->i.flags & ATA_EHI_DID_RESET) - ehc->i.action |= ATA_EH_HARDRESET; - else - ehc->i.action |= ATA_EH_SOFTRESET; - } + ata_eh_handle_dev_fail(dev, rc); if (ata_port_nr_enabled(ap)) { ata_port_printk(ap, KERN_WARNING, "failed to recover some " diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index fa1c22c7b38f..ca7d2245d684 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -604,13 +604,17 @@ int ata_pci_init_bmdma(struct ata_host *host) } /** - * ata_pci_init_native_host - acquire native ATA resources and init host + * ata_pci_init_sff_host - acquire native PCI ATA resources and init host * @host: target ATA host * * Acquire native PCI ATA resources for @host and initialize the * first two ports of @host accordingly. Ports marked dummy are * skipped and allocation failure makes the port dummy. * + * Note that native PCI resources are valid even for legacy hosts + * as we fix up pdev resources array early in boot, so this + * function can be used for both native and legacy SFF hosts. + * * LOCKING: * Inherited from calling layer (may sleep). * @@ -618,7 +622,7 @@ int ata_pci_init_bmdma(struct ata_host *host) * 0 if at least one port is initialized, -ENODEV if no port is * available. */ -int ata_pci_init_native_host(struct ata_host *host) +int ata_pci_init_sff_host(struct ata_host *host) { struct device *gdev = host->dev; struct pci_dev *pdev = to_pci_dev(gdev); @@ -673,7 +677,7 @@ int ata_pci_init_native_host(struct ata_host *host) } /** - * ata_pci_prepare_native_host - helper to prepare native PCI ATA host + * ata_pci_prepare_sff_host - helper to prepare native PCI ATA host * @pdev: target PCI device * @ppi: array of port_info, must be enough for two ports * @r_host: out argument for the initialized ATA host @@ -687,9 +691,9 @@ int ata_pci_init_native_host(struct ata_host *host) * RETURNS: * 0 on success, -errno otherwise. */ -int ata_pci_prepare_native_host(struct pci_dev *pdev, - const struct ata_port_info * const * ppi, - struct ata_host **r_host) +int ata_pci_prepare_sff_host(struct pci_dev *pdev, + const struct ata_port_info * const * ppi, + struct ata_host **r_host) { struct ata_host *host; int rc; @@ -705,7 +709,7 @@ int ata_pci_prepare_native_host(struct pci_dev *pdev, goto err_out; } - rc = ata_pci_init_native_host(host); + rc = ata_pci_init_sff_host(host); if (rc) goto err_out; @@ -730,221 +734,6 @@ int ata_pci_prepare_native_host(struct pci_dev *pdev, return rc; } -struct ata_legacy_devres { - unsigned int mask; - unsigned long cmd_port[2]; - void __iomem * cmd_addr[2]; - void __iomem * ctl_addr[2]; - unsigned int irq[2]; - void * irq_dev_id[2]; -}; - -static void ata_legacy_free_irqs(struct ata_legacy_devres *legacy_dr) -{ - int i; - - for (i = 0; i < 2; i++) { - if (!legacy_dr->irq[i]) - continue; - - free_irq(legacy_dr->irq[i], legacy_dr->irq_dev_id[i]); - legacy_dr->irq[i] = 0; - legacy_dr->irq_dev_id[i] = NULL; - } -} - -static void ata_legacy_release(struct device *gdev, void *res) -{ - struct ata_legacy_devres *this = res; - int i; - - ata_legacy_free_irqs(this); - - for (i = 0; i < 2; i++) { - if (this->cmd_addr[i]) - ioport_unmap(this->cmd_addr[i]); - if (this->ctl_addr[i]) - ioport_unmap(this->ctl_addr[i]); - if (this->cmd_port[i]) - release_region(this->cmd_port[i], 8); - } -} - -static int ata_init_legacy_port(struct ata_port *ap, - struct ata_legacy_devres *legacy_dr) -{ - struct ata_host *host = ap->host; - int port_no = ap->port_no; - unsigned long cmd_port, ctl_port; - - if (port_no == 0) { - cmd_port = ATA_PRIMARY_CMD; - ctl_port = ATA_PRIMARY_CTL; - } else { - cmd_port = ATA_SECONDARY_CMD; - ctl_port = ATA_SECONDARY_CTL; - } - - /* request cmd_port */ - if (request_region(cmd_port, 8, "libata")) - legacy_dr->cmd_port[port_no] = cmd_port; - else { - dev_printk(KERN_WARNING, host->dev, - "0x%0lX IDE port busy\n", cmd_port); - return -EBUSY; - } - - /* iomap cmd and ctl ports */ - legacy_dr->cmd_addr[port_no] = ioport_map(cmd_port, 8); - legacy_dr->ctl_addr[port_no] = ioport_map(ctl_port, 1); - if (!legacy_dr->cmd_addr[port_no] || !legacy_dr->ctl_addr[port_no]) { - dev_printk(KERN_WARNING, host->dev, - "failed to map cmd/ctl ports\n"); - return -ENOMEM; - } - - /* init IO addresses */ - ap->ioaddr.cmd_addr = legacy_dr->cmd_addr[port_no]; - ap->ioaddr.altstatus_addr = legacy_dr->ctl_addr[port_no]; - ap->ioaddr.ctl_addr = legacy_dr->ctl_addr[port_no]; - ata_std_ports(&ap->ioaddr); - - return 0; -} - -/** - * ata_init_legacy_host - acquire legacy ATA resources and init ATA host - * @host: target ATA host - * @was_busy: out parameter, indicates whether any port was busy - * - * Acquire legacy ATA resources for the first two ports of @host - * and initialize it accordingly. Ports marked dummy are skipped - * and resource acquistion failure makes the port dummy. - * - * LOCKING: - * Inherited from calling layer (may sleep). - * - * RETURNS: - * 0 if at least one port is initialized, -ENODEV if no port is - * available. - */ -static int ata_init_legacy_host(struct ata_host *host, int *was_busy) -{ - struct device *gdev = host->dev; - struct ata_legacy_devres *legacy_dr; - int i, rc; - - if (!devres_open_group(gdev, NULL, GFP_KERNEL)) - return -ENOMEM; - - rc = -ENOMEM; - legacy_dr = devres_alloc(ata_legacy_release, sizeof(*legacy_dr), - GFP_KERNEL); - if (!legacy_dr) - goto err_out; - devres_add(gdev, legacy_dr); - - for (i = 0; i < 2; i++) { - if (ata_port_is_dummy(host->ports[i])) - continue; - - rc = ata_init_legacy_port(host->ports[i], legacy_dr); - if (rc == 0) - legacy_dr->mask |= 1 << i; - else { - if (rc == -EBUSY) - (*was_busy)++; - host->ports[i]->ops = &ata_dummy_port_ops; - } - } - - if (!legacy_dr->mask) { - dev_printk(KERN_ERR, gdev, "no available legacy port\n"); - return -ENODEV; - } - - devres_remove_group(gdev, NULL); - return 0; - - err_out: - devres_release_group(gdev, NULL); - return rc; -} - -/** - * ata_request_legacy_irqs - request legacy ATA IRQs - * @host: target ATA host - * @handler: array of IRQ handlers - * @irq_flags: array of IRQ flags - * @dev_id: array of IRQ dev_ids - * - * Request legacy IRQs for non-dummy legacy ports in @host. All - * IRQ parameters are passed as array to allow ports to have - * separate IRQ handlers. - * - * LOCKING: - * Inherited from calling layer (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -static int ata_request_legacy_irqs(struct ata_host *host, - irq_handler_t const *handler, - const unsigned int *irq_flags, - void * const *dev_id) -{ - struct device *gdev = host->dev; - struct ata_legacy_devres *legacy_dr; - int i, rc; - - legacy_dr = devres_find(host->dev, ata_legacy_release, NULL, NULL); - BUG_ON(!legacy_dr); - - for (i = 0; i < 2; i++) { - unsigned int irq; - - /* FIXME: ATA_*_IRQ() should take generic device not pci_dev */ - if (i == 0) - irq = ATA_PRIMARY_IRQ(to_pci_dev(gdev)); - else - irq = ATA_SECONDARY_IRQ(to_pci_dev(gdev)); - - if (!(legacy_dr->mask & (1 << i))) - continue; - - if (!handler[i]) { - dev_printk(KERN_ERR, gdev, - "NULL handler specified for port %d\n", i); - rc = -EINVAL; - goto err_out; - } - - rc = request_irq(irq, handler[i], irq_flags[i], DRV_NAME, - dev_id[i]); - if (rc) { - dev_printk(KERN_ERR, gdev, - "irq %u request failed (errno=%d)\n", irq, rc); - goto err_out; - } - - /* record irq allocation in legacy_dr */ - legacy_dr->irq[i] = irq; - legacy_dr->irq_dev_id[i] = dev_id[i]; - - /* only used to print info */ - if (i == 0) - host->irq = irq; - else - host->irq2 = irq; - } - - return 0; - - err_out: - ata_legacy_free_irqs(legacy_dr); - return rc; -} - /** * ata_pci_init_one - Initialize/register PCI IDE host controller * @pdev: Controller to be initialized @@ -1029,35 +818,11 @@ int ata_pci_init_one(struct pci_dev *pdev, #endif } - /* alloc and init host */ - host = ata_host_alloc_pinfo(dev, ppi, 2); - if (!host) { - dev_printk(KERN_ERR, &pdev->dev, - "failed to allocate ATA host\n"); - rc = -ENOMEM; + /* prepare host */ + rc = ata_pci_prepare_sff_host(pdev, ppi, &host); + if (rc) goto err_out; - } - if (!legacy_mode) { - rc = ata_pci_init_native_host(host); - if (rc) - goto err_out; - } else { - int was_busy = 0; - - rc = ata_init_legacy_host(host, &was_busy); - if (was_busy) - pcim_pin_device(pdev); - if (rc) - goto err_out; - - /* request respective PCI regions, may fail */ - rc = pci_request_region(pdev, 1, DRV_NAME); - rc = pci_request_region(pdev, 3, DRV_NAME); - } - - /* init BMDMA, may fail */ - ata_pci_init_bmdma(host); pci_set_master(pdev); /* start host and request IRQ */ @@ -1068,17 +833,28 @@ int ata_pci_init_one(struct pci_dev *pdev, if (!legacy_mode) { rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler, IRQF_SHARED, DRV_NAME, host); + if (rc) + goto err_out; host->irq = pdev->irq; } else { - irq_handler_t handler[2] = { host->ops->irq_handler, - host->ops->irq_handler }; - unsigned int irq_flags[2] = { IRQF_SHARED, IRQF_SHARED }; - void *dev_id[2] = { host, host }; + if (!ata_port_is_dummy(host->ports[0])) { + host->irq = ATA_PRIMARY_IRQ(pdev); + rc = devm_request_irq(dev, host->irq, + pi->port_ops->irq_handler, + IRQF_SHARED, DRV_NAME, host); + if (rc) + goto err_out; + } - rc = ata_request_legacy_irqs(host, handler, irq_flags, dev_id); + if (!ata_port_is_dummy(host->ports[1])) { + host->irq2 = ATA_SECONDARY_IRQ(pdev); + rc = devm_request_irq(dev, host->irq2, + pi->port_ops->irq_handler, + IRQF_SHARED, DRV_NAME, host); + if (rc) + goto err_out; + } } - if (rc) - goto err_out; /* register */ rc = ata_host_register(host, pi->sht); diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index d928c9105034..be0f05efac6d 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -23,7 +23,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt3x3" -#define DRV_VERSION "0.4.3" +#define DRV_VERSION "0.5.3" /** * hpt3x3_set_piomode - PIO setup @@ -52,6 +52,7 @@ static void hpt3x3_set_piomode(struct ata_port *ap, struct ata_device *adev) pci_write_config_dword(pdev, 0x48, r2); } +#if defined(CONFIG_PATA_HPT3X3_DMA) /** * hpt3x3_set_dmamode - DMA timing setup * @ap: ATA interface @@ -59,6 +60,9 @@ static void hpt3x3_set_piomode(struct ata_port *ap, struct ata_device *adev) * * Set up the channel for MWDMA or UDMA modes. Much the same as with * PIO, load the mode number and then set MWDMA or UDMA flag. + * + * 0x44 : bit 0-2 master mode, 3-5 slave mode, etc + * 0x48 : bit 4/0 DMA/UDMA bit 5/1 for slave etc */ static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev) @@ -76,13 +80,26 @@ static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev) r2 &= ~(0x11 << dn); /* Clear MWDMA and UDMA bits */ if (adev->dma_mode >= XFER_UDMA_0) - r2 |= 0x01 << dn; /* Ultra mode */ + r2 |= (0x10 << dn); /* Ultra mode */ else - r2 |= 0x10 << dn; /* MWDMA */ + r2 |= (0x01 << dn); /* MWDMA */ pci_write_config_dword(pdev, 0x44, r1); pci_write_config_dword(pdev, 0x48, r2); } +#endif /* CONFIG_PATA_HPT3X3_DMA */ + +/** + * hpt3x3_atapi_dma - ATAPI DMA check + * @qc: Queued command + * + * Just say no - we don't do ATAPI DMA + */ + +static int hpt3x3_atapi_dma(struct ata_queued_cmd *qc) +{ + return 1; +} static struct scsi_host_template hpt3x3_sht = { .module = THIS_MODULE, @@ -105,7 +122,9 @@ static struct scsi_host_template hpt3x3_sht = { static struct ata_port_operations hpt3x3_port_ops = { .port_disable = ata_port_disable, .set_piomode = hpt3x3_set_piomode, +#if defined(CONFIG_PATA_HPT3X3_DMA) .set_dmamode = hpt3x3_set_dmamode, +#endif .mode_filter = ata_pci_default_filter, .tf_load = ata_tf_load, @@ -124,6 +143,7 @@ static struct ata_port_operations hpt3x3_port_ops = { .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, + .check_atapi_dma= hpt3x3_atapi_dma, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, @@ -158,32 +178,79 @@ static void hpt3x3_init_chipset(struct pci_dev *dev) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); } - /** * hpt3x3_init_one - Initialise an HPT343/363 - * @dev: PCI device + * @pdev: PCI device * @id: Entry in match table * - * Perform basic initialisation. The chip has a quirk that it won't - * function unless it is at XX00. The old ATA driver touched this up - * but we leave it for pci quirks to do properly. + * Perform basic initialisation. We set the device up so we access all + * ports via BAR4. This is neccessary to work around errata. */ -static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) +static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { + static int printed_version; static const struct ata_port_info info = { .sht = &hpt3x3_sht, .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, +#if defined(CONFIG_PATA_HPT3X3_DMA) + /* Further debug needed */ .mwdma_mask = 0x07, .udma_mask = 0x07, +#endif .port_ops = &hpt3x3_port_ops }; + /* Register offsets of taskfiles in BAR4 area */ + static const u8 offset_cmd[2] = { 0x20, 0x28 }; + static const u8 offset_ctl[2] = { 0x36, 0x3E }; const struct ata_port_info *ppi[] = { &info, NULL }; - - hpt3x3_init_chipset(dev); - /* Now kick off ATA set up */ - return ata_pci_init_one(dev, ppi); + struct ata_host *host; + int i, rc; + void __iomem *base; + + hpt3x3_init_chipset(pdev); + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2); + if (!host) + return -ENOMEM; + /* acquire resources and fill host */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* Everything is relative to BAR4 if we set up this way */ + rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + host->iomap = pcim_iomap_table(pdev); + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + return rc; + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + return rc; + + base = host->iomap[4]; /* Bus mastering base */ + + for (i = 0; i < host->n_ports; i++) { + struct ata_ioports *ioaddr = &host->ports[i]->ioaddr; + + ioaddr->cmd_addr = base + offset_cmd[i]; + ioaddr->altstatus_addr = + ioaddr->ctl_addr = base + offset_ctl[i]; + ioaddr->scr_addr = NULL; + ata_std_ports(ioaddr); + ioaddr->bmdma_addr = base + 8 * i; + } + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED, + &hpt3x3_sht); } #ifdef CONFIG_PM diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 368fac7d168b..182e83c9047b 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -467,13 +467,27 @@ mpc52xx_ata_remove(struct of_device *op) static int mpc52xx_ata_suspend(struct of_device *op, pm_message_t state) { - return 0; /* FIXME : What to do here ? */ + struct ata_host *host = dev_get_drvdata(&op->dev); + + return ata_host_suspend(host, state); } static int mpc52xx_ata_resume(struct of_device *op) { - return 0; /* FIXME : What to do here ? */ + struct ata_host *host = dev_get_drvdata(&op->dev); + struct mpc52xx_ata_priv *priv = host->private_data; + int rv; + + rv = mpc52xx_ata_hw_init(priv); + if (rv) { + printk(KERN_ERR DRV_NAME ": Error during HW init\n"); + return rv; + } + + ata_host_resume(host); + + return 0; } #endif diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index 61502bc7bf1d..c55667e0eb65 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -238,6 +238,12 @@ static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev) else offset = 0; /* 100MHz */ + /* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */ + if (adev->class == ATA_DEV_ATAPI && speed > XFER_UDMA_4) { + printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME); + speed = XFER_UDMA_4; + } + if (speed >= XFER_UDMA_0) idx = speed - XFER_UDMA_0; else @@ -724,22 +730,36 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc) static u8 scc_bmdma_status (struct ata_port *ap) { - u8 host_stat; void __iomem *mmio = ap->ioaddr.bmdma_addr; - - host_stat = in_be32(mmio + SCC_DMA_STATUS); - - /* Workaround for PTERADD: emulate DMA_INTR when - * - IDE_STATUS[ERR] = 1 - * - INT_STATUS[INTRQ] = 1 - * - DMA_STATUS[IORACTA] = 1 - */ - if (!(host_stat & ATA_DMA_INTR)) { - u32 int_status = in_be32(mmio + SCC_DMA_INTST); - if (ata_altstatus(ap) & ATA_ERR && - int_status & INTSTS_INTRQ && - host_stat & ATA_DMA_ACTIVE) - host_stat |= ATA_DMA_INTR; + u8 host_stat = in_be32(mmio + SCC_DMA_STATUS); + u32 int_status = in_be32(mmio + SCC_DMA_INTST); + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + static int retry = 0; + + /* return if IOS_SS is cleared */ + if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START)) + return host_stat; + + /* errata A252,A308 workaround: Step4 */ + if (ata_altstatus(ap) & ATA_ERR && int_status & INTSTS_INTRQ) + return (host_stat | ATA_DMA_INTR); + + /* errata A308 workaround Step5 */ + if (int_status & INTSTS_IOIRQS) { + host_stat |= ATA_DMA_INTR; + + /* We don't check ATAPI DMA because it is limited to UDMA4 */ + if ((qc->tf.protocol == ATA_PROT_DMA && + qc->dev->xfer_mode > XFER_UDMA_4)) { + if (!(int_status & INTSTS_ACTEINT)) { + printk(KERN_WARNING "ata%u: data lost occurred. (ACTEINT==0, retry:%d)\n", + ap->print_id, retry); + host_stat |= ATA_DMA_ERR; + if (retry++) + ap->udma_mask >>= 1; + } else + retry = 0; + } } return host_stat; @@ -892,10 +912,6 @@ static void scc_std_postreset (struct ata_port *ap, unsigned int *classes) { DPRINTK("ENTER\n"); - /* re-enable interrupts */ - if (!ap->ops->error_handler) - ap->ops->irq_on(ap); - /* is double-select really necessary? */ if (classes[0] != ATA_DEV_NONE) ap->ops->dev_select(ap, 1); diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 2b4508206a6c..657b1ee2f5c1 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -149,6 +149,9 @@ static int sis_pre_reset(struct ata_port *ap, unsigned long deadline) if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) return -ENOENT; + /* Clear the FIFO settings. We can't enable the FIFO until + we know we are poking at a disk */ + pci_write_config_byte(pdev, 0x4B, 0); return ata_std_prereset(ap, deadline); } diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 3873b29c80d6..8a77a0ae83ad 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -29,11 +29,6 @@ I distinctly remember a couple workarounds (one related to PCI-X) are still needed. - 2) Convert to LibATA new EH. Required for hotplug, NCQ, and sane - probing/error handling in general. MUST HAVE. - - 3) Add hotplug support (easy, once new-EH support appears) - 4) Add NCQ support (easy to intermediate, once new-EH support appears) 5) Investigate problems with PCI Message Signalled Interrupts (MSI). @@ -108,8 +103,6 @@ enum { MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */ MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ, - MV_USE_Q_DEPTH = ATA_DEF_QUEUE, - MV_MAX_Q_DEPTH = 32, MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1, @@ -133,18 +126,22 @@ enum { /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ - MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING), + MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | + ATA_FLAG_PIO_POLLING, MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE, CRQB_FLAG_READ = (1 << 0), CRQB_TAG_SHIFT = 1, + CRQB_IOID_SHIFT = 6, /* CRQB Gen-II/IIE IO Id shift */ + CRQB_HOSTQ_SHIFT = 17, /* CRQB Gen-II/IIE HostQueTag shift */ CRQB_CMD_ADDR_SHIFT = 8, CRQB_CMD_CS = (0x2 << 11), CRQB_CMD_LAST = (1 << 15), CRPB_FLAG_STATUS_SHIFT = 8, + CRPB_IOID_SHIFT_6 = 5, /* CRPB Gen-II IO Id shift */ + CRPB_IOID_SHIFT_7 = 7, /* CRPB Gen-IIE IO Id shift */ EPRD_FLAG_END_OF_TBL = (1 << 31), @@ -236,8 +233,10 @@ enum { EDMA_ERR_DEV_DCON = (1 << 3), EDMA_ERR_DEV_CON = (1 << 4), EDMA_ERR_SERR = (1 << 5), - EDMA_ERR_SELF_DIS = (1 << 7), + EDMA_ERR_SELF_DIS = (1 << 7), /* Gen II/IIE self-disable */ + EDMA_ERR_SELF_DIS_5 = (1 << 8), /* Gen I self-disable */ EDMA_ERR_BIST_ASYNC = (1 << 8), + EDMA_ERR_TRANS_IRQ_7 = (1 << 8), /* Gen IIE transprt layer irq */ EDMA_ERR_CRBQ_PAR = (1 << 9), EDMA_ERR_CRPB_PAR = (1 << 10), EDMA_ERR_INTRL_PAR = (1 << 11), @@ -248,13 +247,33 @@ enum { EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), EDMA_ERR_LNK_DATA_TX = (0x1f << 26), EDMA_ERR_TRANS_PROTO = (1 << 31), - EDMA_ERR_FATAL = (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR | - EDMA_ERR_DEV_DCON | EDMA_ERR_CRBQ_PAR | - EDMA_ERR_CRPB_PAR | EDMA_ERR_INTRL_PAR | - EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 | - EDMA_ERR_LNK_DATA_RX | - EDMA_ERR_LNK_DATA_TX | - EDMA_ERR_TRANS_PROTO), + EDMA_ERR_OVERRUN_5 = (1 << 5), + EDMA_ERR_UNDERRUN_5 = (1 << 6), + EDMA_EH_FREEZE = EDMA_ERR_D_PAR | + EDMA_ERR_PRD_PAR | + EDMA_ERR_DEV_DCON | + EDMA_ERR_DEV_CON | + EDMA_ERR_SERR | + EDMA_ERR_SELF_DIS | + EDMA_ERR_CRBQ_PAR | + EDMA_ERR_CRPB_PAR | + EDMA_ERR_INTRL_PAR | + EDMA_ERR_IORDY | + EDMA_ERR_LNK_CTRL_RX_2 | + EDMA_ERR_LNK_DATA_RX | + EDMA_ERR_LNK_DATA_TX | + EDMA_ERR_TRANS_PROTO, + EDMA_EH_FREEZE_5 = EDMA_ERR_D_PAR | + EDMA_ERR_PRD_PAR | + EDMA_ERR_DEV_DCON | + EDMA_ERR_DEV_CON | + EDMA_ERR_OVERRUN_5 | + EDMA_ERR_UNDERRUN_5 | + EDMA_ERR_SELF_DIS_5 | + EDMA_ERR_CRBQ_PAR | + EDMA_ERR_CRPB_PAR | + EDMA_ERR_INTRL_PAR | + EDMA_ERR_IORDY, EDMA_REQ_Q_BASE_HI_OFS = 0x10, EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */ @@ -282,18 +301,18 @@ enum { MV_HP_ERRATA_60X1B2 = (1 << 3), MV_HP_ERRATA_60X1C0 = (1 << 4), MV_HP_ERRATA_XX42A0 = (1 << 5), - MV_HP_50XX = (1 << 6), - MV_HP_GEN_IIE = (1 << 7), + MV_HP_GEN_I = (1 << 6), + MV_HP_GEN_II = (1 << 7), + MV_HP_GEN_IIE = (1 << 8), /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), + MV_PP_FLAG_HAD_A_RESET = (1 << 2), }; -#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX) -#define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0) -#define IS_GEN_I(hpriv) IS_50XX(hpriv) -#define IS_GEN_II(hpriv) IS_60XX(hpriv) +#define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I) +#define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II) #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE) enum { @@ -352,6 +371,10 @@ struct mv_port_priv { dma_addr_t crpb_dma; struct mv_sg *sg_tbl; dma_addr_t sg_tbl_dma; + + unsigned int req_idx; + unsigned int resp_idx; + u32 pp_flags; }; @@ -384,14 +407,15 @@ static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in); static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in); static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); -static void mv_phy_reset(struct ata_port *ap); -static void __mv_phy_reset(struct ata_port *ap, int can_sleep); static int mv_port_start(struct ata_port *ap); static void mv_port_stop(struct ata_port *ap); static void mv_qc_prep(struct ata_queued_cmd *qc); static void mv_qc_prep_iie(struct ata_queued_cmd *qc); static unsigned int mv_qc_issue(struct ata_queued_cmd *qc); -static void mv_eng_timeout(struct ata_port *ap); +static void mv_error_handler(struct ata_port *ap); +static void mv_post_int_cmd(struct ata_queued_cmd *qc); +static void mv_eh_freeze(struct ata_port *ap); +static void mv_eh_thaw(struct ata_port *ap); static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, @@ -415,14 +439,31 @@ static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio); static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port_no); -static void mv_stop_and_reset(struct ata_port *ap); -static struct scsi_host_template mv_sht = { +static struct scsi_host_template mv5_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = MV_MAX_SG_CT, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = 1, + .proc_name = DRV_NAME, + .dma_boundary = MV_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static struct scsi_host_template mv6_sht = { .module = THIS_MODULE, .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, - .can_queue = MV_USE_Q_DEPTH, + .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = MV_MAX_SG_CT, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, @@ -444,19 +485,21 @@ static const struct ata_port_operations mv5_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = mv_phy_reset, .cable_detect = ata_cable_sata, .qc_prep = mv_qc_prep, .qc_issue = mv_qc_issue, .data_xfer = ata_data_xfer, - .eng_timeout = mv_eng_timeout, - .irq_clear = mv_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, + .error_handler = mv_error_handler, + .post_internal_cmd = mv_post_int_cmd, + .freeze = mv_eh_freeze, + .thaw = mv_eh_thaw, + .scr_read = mv5_scr_read, .scr_write = mv5_scr_write, @@ -473,19 +516,21 @@ static const struct ata_port_operations mv6_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = mv_phy_reset, .cable_detect = ata_cable_sata, .qc_prep = mv_qc_prep, .qc_issue = mv_qc_issue, .data_xfer = ata_data_xfer, - .eng_timeout = mv_eng_timeout, - .irq_clear = mv_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, + .error_handler = mv_error_handler, + .post_internal_cmd = mv_post_int_cmd, + .freeze = mv_eh_freeze, + .thaw = mv_eh_thaw, + .scr_read = mv_scr_read, .scr_write = mv_scr_write, @@ -502,19 +547,21 @@ static const struct ata_port_operations mv_iie_ops = { .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .phy_reset = mv_phy_reset, .cable_detect = ata_cable_sata, .qc_prep = mv_qc_prep_iie, .qc_issue = mv_qc_issue, .data_xfer = ata_data_xfer, - .eng_timeout = mv_eng_timeout, - .irq_clear = mv_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, + .error_handler = mv_error_handler, + .post_internal_cmd = mv_post_int_cmd, + .freeze = mv_eh_freeze, + .thaw = mv_eh_thaw, + .scr_read = mv_scr_read, .scr_write = mv_scr_write, @@ -530,38 +577,38 @@ static const struct ata_port_info mv_port_info[] = { .port_ops = &mv5_ops, }, { /* chip_508x */ - .flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), + .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_5080 */ - .flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), + .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv5_ops, }, { /* chip_604x */ - .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv6_ops, }, { /* chip_608x */ - .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | - MV_FLAG_DUAL_HC), + .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS | + MV_FLAG_DUAL_HC, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv6_ops, }, { /* chip_6042 */ - .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, }, { /* chip_7042 */ - .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, @@ -709,6 +756,46 @@ static void mv_irq_clear(struct ata_port *ap) { } +static void mv_set_edma_ptrs(void __iomem *port_mmio, + struct mv_host_priv *hpriv, + struct mv_port_priv *pp) +{ + u32 index; + + /* + * initialize request queue + */ + index = (pp->req_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_REQ_Q_PTR_SHIFT; + + WARN_ON(pp->crqb_dma & 0x3ff); + writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); + writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index, + port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) + writelfl((pp->crqb_dma & 0xffffffff) | index, + port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + else + writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + + /* + * initialize response queue + */ + index = (pp->resp_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_RSP_Q_PTR_SHIFT; + + WARN_ON(pp->crpb_dma & 0xff); + writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); + + if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) + writelfl((pp->crpb_dma & 0xffffffff) | index, + port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + else + writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + + writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index, + port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); +} + /** * mv_start_dma - Enable eDMA engine * @base: port base address @@ -720,9 +807,15 @@ static void mv_irq_clear(struct ata_port *ap) * LOCKING: * Inherited from caller. */ -static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) +static void mv_start_dma(void __iomem *base, struct mv_host_priv *hpriv, + struct mv_port_priv *pp) { - if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { + if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) { + /* clear EDMA event indicators, if any */ + writelfl(0, base + EDMA_ERR_IRQ_CAUSE_OFS); + + mv_set_edma_ptrs(base, hpriv, pp); + writelfl(EDMA_EN, base + EDMA_CMD_OFS); pp->pp_flags |= MV_PP_FLAG_EDMA_EN; } @@ -739,14 +832,14 @@ static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) * LOCKING: * Inherited from caller. */ -static void mv_stop_dma(struct ata_port *ap) +static int mv_stop_dma(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; u32 reg; - int i; + int i, err = 0; - if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) { + if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) { /* Disable EDMA if active. The disable bit auto clears. */ writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); @@ -758,16 +851,18 @@ static void mv_stop_dma(struct ata_port *ap) /* now properly wait for the eDMA to stop */ for (i = 1000; i > 0; i--) { reg = readl(port_mmio + EDMA_CMD_OFS); - if (!(EDMA_EN & reg)) { + if (!(reg & EDMA_EN)) break; - } + udelay(100); } - if (EDMA_EN & reg) { + if (reg & EDMA_EN) { ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n"); - /* FIXME: Consider doing a reset here to recover */ + err = -EIO; } + + return err; } #ifdef ATA_DEBUG @@ -884,12 +979,13 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) writelfl(val, mv_ap_base(ap) + ofs); } -static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio) +static void mv_edma_cfg(struct ata_port *ap, struct mv_host_priv *hpriv, + void __iomem *port_mmio) { u32 cfg = readl(port_mmio + EDMA_CFG_OFS); /* set up non-NCQ EDMA configuration */ - cfg &= ~(1 << 9); /* disable equeue */ + cfg &= ~(1 << 9); /* disable eQue */ if (IS_GEN_I(hpriv)) { cfg &= ~0x1f; /* clear queue depth */ @@ -909,7 +1005,7 @@ static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio) cfg |= (1 << 18); /* enab early completion */ cfg |= (1 << 17); /* enab cut-through (dis stor&forwrd) */ cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */ - cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */ + cfg &= ~(EDMA_CFG_NCQ); /* clear NCQ */ } writelfl(cfg, port_mmio + EDMA_CFG_OFS); @@ -971,28 +1067,9 @@ static int mv_port_start(struct ata_port *ap) pp->sg_tbl = mem; pp->sg_tbl_dma = mem_dma; - mv_edma_cfg(hpriv, port_mmio); + mv_edma_cfg(ap, hpriv, port_mmio); - writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); - writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK, - port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - - if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) - writelfl(pp->crqb_dma & 0xffffffff, - port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); - else - writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); - - writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); - - if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) - writelfl(pp->crpb_dma & 0xffffffff, - port_mmio + EDMA_RSP_Q_IN_PTR_OFS); - else - writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); - - writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, - port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + mv_set_edma_ptrs(port_mmio, hpriv, pp); /* Don't turn on EDMA here...do it before DMA commands only. Else * we'll be unable to send non-data, PIO, etc due to restricted access @@ -1055,11 +1132,6 @@ static unsigned int mv_fill_sg(struct ata_queued_cmd *qc) return n_sg; } -static inline unsigned mv_inc_q_index(unsigned index) -{ - return (index + 1) & MV_MAX_Q_DEPTH_MASK; -} - static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) { u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS | @@ -1088,7 +1160,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) u16 flags = 0; unsigned in_index; - if (ATA_PROT_DMA != qc->tf.protocol) + if (qc->tf.protocol != ATA_PROT_DMA) return; /* Fill in command request block @@ -1097,10 +1169,10 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) flags |= CRQB_FLAG_READ; WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); flags |= qc->tag << CRQB_TAG_SHIFT; + flags |= qc->tag << CRQB_IOID_SHIFT; /* 50xx appears to ignore this*/ - /* get current queue index from hardware */ - in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS) - >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; + /* get current queue index from software */ + in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK; pp->crqb[in_index].sg_addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); @@ -1180,7 +1252,7 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) unsigned in_index; u32 flags = 0; - if (ATA_PROT_DMA != qc->tf.protocol) + if (qc->tf.protocol != ATA_PROT_DMA) return; /* Fill in Gen IIE command request block @@ -1190,10 +1262,11 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); flags |= qc->tag << CRQB_TAG_SHIFT; + flags |= qc->tag << CRQB_IOID_SHIFT; /* "I/O Id" is -really- + what we use as our tag */ - /* get current queue index from hardware */ - in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS) - >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; + /* get current queue index from software */ + in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK; crqb = (struct mv_crqb_iie *) &pp->crqb[in_index]; crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); @@ -1241,83 +1314,41 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) */ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) { - void __iomem *port_mmio = mv_ap_base(qc->ap); - struct mv_port_priv *pp = qc->ap->private_data; - unsigned in_index; - u32 in_ptr; + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + struct mv_host_priv *hpriv = ap->host->private_data; + u32 in_index; - if (ATA_PROT_DMA != qc->tf.protocol) { + if (qc->tf.protocol != ATA_PROT_DMA) { /* We're about to send a non-EDMA capable command to the * port. Turn off EDMA so there won't be problems accessing * shadow block, etc registers. */ - mv_stop_dma(qc->ap); + mv_stop_dma(ap); return ata_qc_issue_prot(qc); } - in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; + mv_start_dma(port_mmio, hpriv, pp); + + in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK; /* until we do queuing, the queue should be empty at this point */ WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); - in_index = mv_inc_q_index(in_index); /* now incr producer index */ + pp->req_idx++; - mv_start_dma(port_mmio, pp); + in_index = (pp->req_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_REQ_Q_PTR_SHIFT; /* and write the request in pointer to kick the EDMA to life */ - in_ptr &= EDMA_REQ_Q_BASE_LO_MASK; - in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT; - writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index, + port_mmio + EDMA_REQ_Q_IN_PTR_OFS); return 0; } /** - * mv_get_crpb_status - get status from most recently completed cmd - * @ap: ATA channel to manipulate - * - * This routine is for use when the port is in DMA mode, when it - * will be using the CRPB (command response block) method of - * returning command completion information. We check indices - * are good, grab status, and bump the response consumer index to - * prove that we're up to date. - * - * LOCKING: - * Inherited from caller. - */ -static u8 mv_get_crpb_status(struct ata_port *ap) -{ - void __iomem *port_mmio = mv_ap_base(ap); - struct mv_port_priv *pp = ap->private_data; - unsigned out_index; - u32 out_ptr; - u8 ata_status; - - out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); - out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; - - ata_status = le16_to_cpu(pp->crpb[out_index].flags) - >> CRPB_FLAG_STATUS_SHIFT; - - /* increment our consumer index... */ - out_index = mv_inc_q_index(out_index); - - /* and, until we do NCQ, there should only be 1 CRPB waiting */ - WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) - >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); - - /* write out our inc'd consumer index so EDMA knows we're caught up */ - out_ptr &= EDMA_RSP_Q_BASE_LO_MASK; - out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT; - writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); - - /* Return ATA status register for completed CRPB */ - return ata_status; -} - -/** * mv_err_intr - Handle error interrupts on the port * @ap: ATA channel to manipulate * @reset_allowed: bool: 0 == don't trigger from reset here @@ -1331,30 +1362,191 @@ static u8 mv_get_crpb_status(struct ata_port *ap) * LOCKING: * Inherited from caller. */ -static void mv_err_intr(struct ata_port *ap, int reset_allowed) +static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc) { void __iomem *port_mmio = mv_ap_base(ap); - u32 edma_err_cause, serr = 0; + u32 edma_err_cause, eh_freeze_mask, serr = 0; + struct mv_port_priv *pp = ap->private_data; + struct mv_host_priv *hpriv = ap->host->private_data; + unsigned int edma_enabled = (pp->pp_flags & MV_PP_FLAG_EDMA_EN); + unsigned int action = 0, err_mask = 0; + struct ata_eh_info *ehi = &ap->eh_info; - edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + ata_ehi_clear_desc(ehi); - if (EDMA_ERR_SERR & edma_err_cause) { + if (!edma_enabled) { + /* just a guess: do we need to do this? should we + * expand this, and do it in all cases? + */ sata_scr_read(ap, SCR_ERROR, &serr); sata_scr_write_flush(ap, SCR_ERROR, serr); } - if (EDMA_ERR_SELF_DIS & edma_err_cause) { - struct mv_port_priv *pp = ap->private_data; - pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + + edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + + ata_ehi_push_desc(ehi, "edma_err 0x%08x", edma_err_cause); + + /* + * all generations share these EDMA error cause bits + */ + + if (edma_err_cause & EDMA_ERR_DEV) + err_mask |= AC_ERR_DEV; + if (edma_err_cause & (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR | + EDMA_ERR_CRBQ_PAR | EDMA_ERR_CRPB_PAR | + EDMA_ERR_INTRL_PAR)) { + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_HARDRESET; + ata_ehi_push_desc(ehi, ", parity error"); + } + if (edma_err_cause & (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON)) { + ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, edma_err_cause & EDMA_ERR_DEV_DCON ? + ", dev disconnect" : ", dev connect"); + } + + if (IS_GEN_I(hpriv)) { + eh_freeze_mask = EDMA_EH_FREEZE_5; + + if (edma_err_cause & EDMA_ERR_SELF_DIS_5) { + struct mv_port_priv *pp = ap->private_data; + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + ata_ehi_push_desc(ehi, ", EDMA self-disable"); + } + } else { + eh_freeze_mask = EDMA_EH_FREEZE; + + if (edma_err_cause & EDMA_ERR_SELF_DIS) { + struct mv_port_priv *pp = ap->private_data; + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + ata_ehi_push_desc(ehi, ", EDMA self-disable"); + } + + if (edma_err_cause & EDMA_ERR_SERR) { + sata_scr_read(ap, SCR_ERROR, &serr); + sata_scr_write_flush(ap, SCR_ERROR, serr); + err_mask = AC_ERR_ATA_BUS; + action |= ATA_EH_HARDRESET; + } } - DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x " - "SERR: 0x%08x\n", ap->print_id, edma_err_cause, serr); /* Clear EDMA now that SERR cleanup done */ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - /* check for fatal here and recover if needed */ - if (reset_allowed && (EDMA_ERR_FATAL & edma_err_cause)) - mv_stop_and_reset(ap); + if (!err_mask) { + err_mask = AC_ERR_OTHER; + action |= ATA_EH_HARDRESET; + } + + ehi->serror |= serr; + ehi->action |= action; + + if (qc) + qc->err_mask |= err_mask; + else + ehi->err_mask |= err_mask; + + if (edma_err_cause & eh_freeze_mask) + ata_port_freeze(ap); + else + ata_port_abort(ap); +} + +static void mv_intr_pio(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + u8 ata_status; + + /* ignore spurious intr if drive still BUSY */ + ata_status = readb(ap->ioaddr.status_addr); + if (unlikely(ata_status & ATA_BUSY)) + return; + + /* get active ATA command */ + qc = ata_qc_from_tag(ap, ap->active_tag); + if (unlikely(!qc)) /* no active tag */ + return; + if (qc->tf.flags & ATA_TFLAG_POLLING) /* polling; we don't own qc */ + return; + + /* and finally, complete the ATA command */ + qc->err_mask |= ac_err_mask(ata_status); + ata_qc_complete(qc); +} + +static void mv_intr_edma(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_host_priv *hpriv = ap->host->private_data; + struct mv_port_priv *pp = ap->private_data; + struct ata_queued_cmd *qc; + u32 out_index, in_index; + bool work_done = false; + + /* get h/w response queue pointer */ + in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) + >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK; + + while (1) { + u16 status; + + /* get s/w response queue last-read pointer, and compare */ + out_index = pp->resp_idx & MV_MAX_Q_DEPTH_MASK; + if (in_index == out_index) + break; + + + /* 50xx: get active ATA command */ + if (IS_GEN_I(hpriv)) + qc = ata_qc_from_tag(ap, ap->active_tag); + + /* 60xx: get active ATA command via tag, to enable support + * for queueing. this works transparently for queued and + * non-queued modes. + */ + else { + unsigned int tag; + + if (IS_GEN_II(hpriv)) + tag = (le16_to_cpu(pp->crpb[out_index].id) + >> CRPB_IOID_SHIFT_6) & 0x3f; + else + tag = (le16_to_cpu(pp->crpb[out_index].id) + >> CRPB_IOID_SHIFT_7) & 0x3f; + + qc = ata_qc_from_tag(ap, tag); + } + + /* lower 8 bits of status are EDMA_ERR_IRQ_CAUSE_OFS + * bits (WARNING: might not necessarily be associated + * with this command), which -should- be clear + * if all is well + */ + status = le16_to_cpu(pp->crpb[out_index].flags); + if (unlikely(status & 0xff)) { + mv_err_intr(ap, qc); + return; + } + + /* and finally, complete the ATA command */ + if (qc) { + qc->err_mask |= + ac_err_mask(status >> CRPB_FLAG_STATUS_SHIFT); + ata_qc_complete(qc); + } + + /* advance software response queue pointer, to + * indicate (after the loop completes) to hardware + * that we have consumed a response queue entry. + */ + work_done = true; + pp->resp_idx++; + } + + if (work_done) + writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | + (out_index << EDMA_RSP_Q_PTR_SHIFT), + port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); } /** @@ -1377,10 +1569,8 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc) { void __iomem *mmio = host->iomap[MV_PRIMARY_BAR]; void __iomem *hc_mmio = mv_hc_base(mmio, hc); - struct ata_queued_cmd *qc; u32 hc_irq_cause; - int shift, port, port0, hard_port, handled; - unsigned int err_mask; + int port, port0; if (hc == 0) port0 = 0; @@ -1389,79 +1579,95 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc) /* we'll need the HC success int register in most cases */ hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); - if (hc_irq_cause) - writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); + if (!hc_irq_cause) + return; + + writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n", hc,relevant,hc_irq_cause); for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { - u8 ata_status = 0; struct ata_port *ap = host->ports[port]; struct mv_port_priv *pp = ap->private_data; + int have_err_bits, hard_port, shift; + + if ((!ap) || (ap->flags & ATA_FLAG_DISABLED)) + continue; + + shift = port << 1; /* (port * 2) */ + if (port >= MV_PORTS_PER_HC) { + shift++; /* skip bit 8 in the HC Main IRQ reg */ + } + have_err_bits = ((PORT0_ERR << shift) & relevant); + + if (unlikely(have_err_bits)) { + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (qc->tf.flags & ATA_TFLAG_POLLING)) + continue; + + mv_err_intr(ap, qc); + continue; + } hard_port = mv_hardport_from_port(port); /* range 0..3 */ - handled = 0; /* ensure ata_status is set if handled++ */ - /* Note that DEV_IRQ might happen spuriously during EDMA, - * and should be ignored in such cases. - * The cause of this is still under investigation. - */ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) { - /* EDMA: check for response queue interrupt */ - if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) { - ata_status = mv_get_crpb_status(ap); - handled = 1; - } + if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) + mv_intr_edma(ap); } else { - /* PIO: check for device (drive) interrupt */ - if ((DEV_IRQ << hard_port) & hc_irq_cause) { - ata_status = readb(ap->ioaddr.status_addr); - handled = 1; - /* ignore spurious intr if drive still BUSY */ - if (ata_status & ATA_BUSY) { - ata_status = 0; - handled = 0; - } - } + if ((DEV_IRQ << hard_port) & hc_irq_cause) + mv_intr_pio(ap); } + } + VPRINTK("EXIT\n"); +} - if (ap && (ap->flags & ATA_FLAG_DISABLED)) - continue; +static void mv_pci_error(struct ata_host *host, void __iomem *mmio) +{ + struct ata_port *ap; + struct ata_queued_cmd *qc; + struct ata_eh_info *ehi; + unsigned int i, err_mask, printed = 0; + u32 err_cause; - err_mask = ac_err_mask(ata_status); + err_cause = readl(mmio + PCI_IRQ_CAUSE_OFS); - shift = port << 1; /* (port * 2) */ - if (port >= MV_PORTS_PER_HC) { - shift++; /* skip bit 8 in the HC Main IRQ reg */ - } - if ((PORT0_ERR << shift) & relevant) { - mv_err_intr(ap, 1); - err_mask |= AC_ERR_OTHER; - handled = 1; - } + dev_printk(KERN_ERR, host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n", + err_cause); + + DPRINTK("All regs @ PCI error\n"); + mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev)); + + writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); - if (handled) { + for (i = 0; i < host->n_ports; i++) { + ap = host->ports[i]; + if (!ata_port_offline(ap)) { + ehi = &ap->eh_info; + ata_ehi_clear_desc(ehi); + if (!printed++) + ata_ehi_push_desc(ehi, + "PCI err cause 0x%08x", err_cause); + err_mask = AC_ERR_HOST_BUS; + ehi->action = ATA_EH_HARDRESET; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (qc->flags & ATA_QCFLAG_ACTIVE)) { - VPRINTK("port %u IRQ found for qc, " - "ata_status 0x%x\n", port,ata_status); - /* mark qc status appropriately */ - if (!(qc->tf.flags & ATA_TFLAG_POLLING)) { - qc->err_mask |= err_mask; - ata_qc_complete(qc); - } - } + if (qc) + qc->err_mask |= err_mask; + else + ehi->err_mask |= err_mask; + + ata_port_freeze(ap); } } - VPRINTK("EXIT\n"); } /** - * mv_interrupt - + * mv_interrupt - Main interrupt event handler * @irq: unused * @dev_instance: private data; in this case the host structure - * @regs: unused * * Read the read only register to determine if any host * controllers have pending interrupts. If so, call lower level @@ -1477,7 +1683,6 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) struct ata_host *host = dev_instance; unsigned int hc, handled = 0, n_hcs; void __iomem *mmio = host->iomap[MV_PRIMARY_BAR]; - struct mv_host_priv *hpriv; u32 irq_stat; irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS); @@ -1491,34 +1696,21 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) n_hcs = mv_get_hc_count(host->ports[0]->flags); spin_lock(&host->lock); + if (unlikely(irq_stat & PCI_ERR)) { + mv_pci_error(host, mmio); + handled = 1; + goto out_unlock; /* skip all other HC irq handling */ + } + for (hc = 0; hc < n_hcs; hc++) { u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT)); if (relevant) { mv_host_intr(host, relevant, hc); - handled++; - } - } - - hpriv = host->private_data; - if (IS_60XX(hpriv)) { - /* deal with the interrupt coalescing bits */ - if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) { - writelfl(0, mmio + MV_IRQ_COAL_CAUSE_LO); - writelfl(0, mmio + MV_IRQ_COAL_CAUSE_HI); - writelfl(0, mmio + MV_IRQ_COAL_CAUSE); + handled = 1; } } - if (PCI_ERR & irq_stat) { - printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n", - readl(mmio + PCI_IRQ_CAUSE_OFS)); - - DPRINTK("All regs @ PCI error\n"); - mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev)); - - writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); - handled++; - } +out_unlock: spin_unlock(&host->lock); return IRQ_RETVAL(handled); @@ -1907,7 +2099,7 @@ static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS); - if (IS_60XX(hpriv)) { + if (IS_GEN_II(hpriv)) { u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); ifctl |= (1 << 7); /* enable gen2i speed */ ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */ @@ -1923,32 +2115,12 @@ static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, hpriv->ops->phy_errata(hpriv, mmio, port_no); - if (IS_50XX(hpriv)) + if (IS_GEN_I(hpriv)) mdelay(1); } -static void mv_stop_and_reset(struct ata_port *ap) -{ - struct mv_host_priv *hpriv = ap->host->private_data; - void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR]; - - mv_stop_dma(ap); - - mv_channel_reset(hpriv, mmio, ap->port_no); - - __mv_phy_reset(ap, 0); -} - -static inline void __msleep(unsigned int msec, int can_sleep) -{ - if (can_sleep) - msleep(msec); - else - mdelay(msec); -} - /** - * __mv_phy_reset - Perform eDMA reset followed by COMRESET + * mv_phy_reset - Perform eDMA reset followed by COMRESET * @ap: ATA channel to manipulate * * Part of this is taken from __sata_phy_reset and modified to @@ -1958,14 +2130,12 @@ static inline void __msleep(unsigned int msec, int can_sleep) * Inherited from caller. This is coded to safe to call at * interrupt level, i.e. it does not sleep. */ -static void __mv_phy_reset(struct ata_port *ap, int can_sleep) +static void mv_phy_reset(struct ata_port *ap, unsigned int *class, + unsigned long deadline) { struct mv_port_priv *pp = ap->private_data; struct mv_host_priv *hpriv = ap->host->private_data; void __iomem *port_mmio = mv_ap_base(ap); - struct ata_taskfile tf; - struct ata_device *dev = &ap->device[0]; - unsigned long timeout; int retry = 5; u32 sstatus; @@ -1978,22 +2148,21 @@ static void __mv_phy_reset(struct ata_port *ap, int can_sleep) /* Issue COMRESET via SControl */ comreset_retry: sata_scr_write_flush(ap, SCR_CONTROL, 0x301); - __msleep(1, can_sleep); + msleep(1); sata_scr_write_flush(ap, SCR_CONTROL, 0x300); - __msleep(20, can_sleep); + msleep(20); - timeout = jiffies + msecs_to_jiffies(200); do { sata_scr_read(ap, SCR_STATUS, &sstatus); if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0)) break; - __msleep(1, can_sleep); - } while (time_before(jiffies, timeout)); + msleep(1); + } while (time_before(jiffies, deadline)); /* work around errata */ - if (IS_60XX(hpriv) && + if (IS_GEN_II(hpriv) && (sstatus != 0x0) && (sstatus != 0x113) && (sstatus != 0x123) && (retry-- > 0)) goto comreset_retry; @@ -2002,13 +2171,8 @@ comreset_retry: "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); - if (ata_port_online(ap)) { - ata_port_probe(ap); - } else { - sata_scr_read(ap, SCR_STATUS, &sstatus); - ata_port_printk(ap, KERN_INFO, - "no device found (phy stat %08x)\n", sstatus); - ata_port_disable(ap); + if (ata_port_offline(ap)) { + *class = ATA_DEV_NONE; return; } @@ -2022,68 +2186,152 @@ comreset_retry: u8 drv_stat = ata_check_status(ap); if ((drv_stat != 0x80) && (drv_stat != 0x7f)) break; - __msleep(500, can_sleep); + msleep(500); if (retry-- <= 0) break; + if (time_after(jiffies, deadline)) + break; } - tf.lbah = readb(ap->ioaddr.lbah_addr); - tf.lbam = readb(ap->ioaddr.lbam_addr); - tf.lbal = readb(ap->ioaddr.lbal_addr); - tf.nsect = readb(ap->ioaddr.nsect_addr); + /* FIXME: if we passed the deadline, the following + * code probably produces an invalid result + */ - dev->class = ata_dev_classify(&tf); - if (!ata_dev_enabled(dev)) { - VPRINTK("Port disabled post-sig: No device present.\n"); - ata_port_disable(ap); - } + /* finally, read device signature from TF registers */ + *class = ata_dev_try_classify(ap, 0, NULL); writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + WARN_ON(pp->pp_flags & MV_PP_FLAG_EDMA_EN); VPRINTK("EXIT\n"); } -static void mv_phy_reset(struct ata_port *ap) +static int mv_prereset(struct ata_port *ap, unsigned long deadline) { - __mv_phy_reset(ap, 1); + struct mv_port_priv *pp = ap->private_data; + struct ata_eh_context *ehc = &ap->eh_context; + int rc; + + rc = mv_stop_dma(ap); + if (rc) + ehc->i.action |= ATA_EH_HARDRESET; + + if (!(pp->pp_flags & MV_PP_FLAG_HAD_A_RESET)) { + pp->pp_flags |= MV_PP_FLAG_HAD_A_RESET; + ehc->i.action |= ATA_EH_HARDRESET; + } + + /* if we're about to do hardreset, nothing more to do */ + if (ehc->i.action & ATA_EH_HARDRESET) + return 0; + + if (ata_port_online(ap)) + rc = ata_wait_ready(ap, deadline); + else + rc = -ENODEV; + + return rc; } -/** - * mv_eng_timeout - Routine called by libata when SCSI times out I/O - * @ap: ATA channel to manipulate - * - * Intent is to clear all pending error conditions, reset the - * chip/bus, fail the command, and move on. - * - * LOCKING: - * This routine holds the host lock while failing the command. - */ -static void mv_eng_timeout(struct ata_port *ap) +static int mv_hardreset(struct ata_port *ap, unsigned int *class, + unsigned long deadline) { + struct mv_host_priv *hpriv = ap->host->private_data; void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR]; - struct ata_queued_cmd *qc; - unsigned long flags; - ata_port_printk(ap, KERN_ERR, "Entering mv_eng_timeout\n"); - DPRINTK("All regs @ start of eng_timeout\n"); - mv_dump_all_regs(mmio, ap->port_no, to_pci_dev(ap->host->dev)); + mv_stop_dma(ap); - qc = ata_qc_from_tag(ap, ap->active_tag); - printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n", - mmio, ap, qc, qc->scsicmd, &qc->scsicmd->cmnd); + mv_channel_reset(hpriv, mmio, ap->port_no); - spin_lock_irqsave(&ap->host->lock, flags); - mv_err_intr(ap, 0); - mv_stop_and_reset(ap); - spin_unlock_irqrestore(&ap->host->lock, flags); + mv_phy_reset(ap, class, deadline); + + return 0; +} + +static void mv_postreset(struct ata_port *ap, unsigned int *classes) +{ + u32 serr; + + /* print link status */ + sata_print_link_status(ap); + + /* clear SError */ + sata_scr_read(ap, SCR_ERROR, &serr); + sata_scr_write_flush(ap, SCR_ERROR, serr); - WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); - if (qc->flags & ATA_QCFLAG_ACTIVE) { - qc->err_mask |= AC_ERR_TIMEOUT; - ata_eh_qc_complete(qc); + /* bail out if no device is present */ + if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { + DPRINTK("EXIT, no device\n"); + return; } + + /* set up device control */ + iowrite8(ap->ctl, ap->ioaddr.ctl_addr); +} + +static void mv_error_handler(struct ata_port *ap) +{ + ata_do_eh(ap, mv_prereset, ata_std_softreset, + mv_hardreset, mv_postreset); +} + +static void mv_post_int_cmd(struct ata_queued_cmd *qc) +{ + mv_stop_dma(qc->ap); +} + +static void mv_eh_freeze(struct ata_port *ap) +{ + void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR]; + unsigned int hc = (ap->port_no > 3) ? 1 : 0; + u32 tmp, mask; + unsigned int shift; + + /* FIXME: handle coalescing completion events properly */ + + shift = ap->port_no * 2; + if (hc > 0) + shift++; + + mask = 0x3 << shift; + + /* disable assertion of portN err, done events */ + tmp = readl(mmio + HC_MAIN_IRQ_MASK_OFS); + writelfl(tmp & ~mask, mmio + HC_MAIN_IRQ_MASK_OFS); +} + +static void mv_eh_thaw(struct ata_port *ap) +{ + void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR]; + unsigned int hc = (ap->port_no > 3) ? 1 : 0; + void __iomem *hc_mmio = mv_hc_base(mmio, hc); + void __iomem *port_mmio = mv_ap_base(ap); + u32 tmp, mask, hc_irq_cause; + unsigned int shift, hc_port_no = ap->port_no; + + /* FIXME: handle coalescing completion events properly */ + + shift = ap->port_no * 2; + if (hc > 0) { + shift++; + hc_port_no -= 4; + } + + mask = 0x3 << shift; + + /* clear EDMA errors on this port */ + writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + + /* clear pending irq events */ + hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); + hc_irq_cause &= ~(1 << hc_port_no); /* clear CRPB-done */ + hc_irq_cause &= ~(1 << (hc_port_no + 8)); /* clear Device int */ + writel(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); + + /* enable assertion of portN err, done events */ + tmp = readl(mmio + HC_MAIN_IRQ_MASK_OFS); + writelfl(tmp | mask, mmio + HC_MAIN_IRQ_MASK_OFS); } /** @@ -2147,7 +2395,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) switch(board_idx) { case chip_5080: hpriv->ops = &mv5xxx_ops; - hp_flags |= MV_HP_50XX; + hp_flags |= MV_HP_GEN_I; switch (rev_id) { case 0x1: @@ -2167,7 +2415,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) case chip_504x: case chip_508x: hpriv->ops = &mv5xxx_ops; - hp_flags |= MV_HP_50XX; + hp_flags |= MV_HP_GEN_I; switch (rev_id) { case 0x0: @@ -2187,6 +2435,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) case chip_604x: case chip_608x: hpriv->ops = &mv6xxx_ops; + hp_flags |= MV_HP_GEN_II; switch (rev_id) { case 0x7: @@ -2206,7 +2455,6 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) case chip_7042: case chip_6042: hpriv->ops = &mv6xxx_ops; - hp_flags |= MV_HP_GEN_IIE; switch (rev_id) { @@ -2273,7 +2521,7 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) hpriv->ops->enable_leds(hpriv, mmio); for (port = 0; port < host->n_ports; port++) { - if (IS_60XX(hpriv)) { + if (IS_GEN_II(hpriv)) { void __iomem *port_mmio = mv_port_base(mmio, port); u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); @@ -2308,7 +2556,7 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) /* and unmask interrupt generation for host regs */ writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); - if (IS_50XX(hpriv)) + if (IS_GEN_I(hpriv)) writelfl(~HC_MAIN_MASKED_IRQS_5, mmio + HC_MAIN_IRQ_MASK_OFS); else writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); @@ -2426,8 +2674,9 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) mv_print_info(host); pci_set_master(pdev); + pci_set_mwi(pdev); return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED, - &mv_sht); + IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht); } static int __init mv_init(void) diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index b2656867c647..db81e3efa5ec 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -1560,7 +1560,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) } ppi[0] = &nv_port_info[type]; - rc = ata_pci_prepare_native_host(pdev, ppi, &host); + rc = ata_pci_prepare_sff_host(pdev, ppi, &host); if (rc) return rc; diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 2ad5872fe90c..d2fcb9a6bec2 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -45,7 +45,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_promise" -#define DRV_VERSION "2.08" +#define DRV_VERSION "2.09" enum { PDC_MAX_PORTS = 4, @@ -716,6 +716,9 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance) unsigned int i, tmp; unsigned int handled = 0; void __iomem *mmio_base; + unsigned int hotplug_offset, ata_no; + u32 hotplug_status; + int is_sataii_tx4; VPRINTK("ENTER\n"); @@ -726,10 +729,20 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance) mmio_base = host->iomap[PDC_MMIO_BAR]; + /* read and clear hotplug flags for all ports */ + if (host->ports[0]->flags & PDC_FLAG_GEN_II) + hotplug_offset = PDC2_SATA_PLUG_CSR; + else + hotplug_offset = PDC_SATA_PLUG_CSR; + hotplug_status = readl(mmio_base + hotplug_offset); + if (hotplug_status & 0xff) + writel(hotplug_status | 0xff, mmio_base + hotplug_offset); + hotplug_status &= 0xff; /* clear uninteresting bits */ + /* reading should also clear interrupts */ mask = readl(mmio_base + PDC_INT_SEQMASK); - if (mask == 0xffffffff) { + if (mask == 0xffffffff && hotplug_status == 0) { VPRINTK("QUICK EXIT 2\n"); return IRQ_NONE; } @@ -737,16 +750,34 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance) spin_lock(&host->lock); mask &= 0xffff; /* only 16 tags possible */ - if (!mask) { + if (mask == 0 && hotplug_status == 0) { VPRINTK("QUICK EXIT 3\n"); goto done_irq; } writel(mask, mmio_base + PDC_INT_SEQMASK); + is_sataii_tx4 = pdc_is_sataii_tx4(host->ports[0]->flags); + for (i = 0; i < host->n_ports; i++) { VPRINTK("port %u\n", i); ap = host->ports[i]; + + /* check for a plug or unplug event */ + ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4); + tmp = hotplug_status & (0x11 << ata_no); + if (tmp && ap && + !(ap->flags & ATA_FLAG_DISABLED)) { + struct ata_eh_info *ehi = &ap->eh_info; + ata_ehi_clear_desc(ehi); + ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, "hotplug_status %#x", tmp); + ata_port_freeze(ap); + ++handled; + continue; + } + + /* check for a packet interrupt */ tmp = mask & (1 << (i + 1)); if (tmp && ap && !(ap->flags & ATA_FLAG_DISABLED)) { @@ -902,9 +933,9 @@ static void pdc_host_init(struct ata_host *host) tmp = readl(mmio + hotplug_offset); writel(tmp | 0xff, mmio + hotplug_offset); - /* mask plug/unplug ints */ + /* unmask plug/unplug ints */ tmp = readl(mmio + hotplug_offset); - writel(tmp | 0xff0000, mmio + hotplug_offset); + writel(tmp & ~0xff0000, mmio + hotplug_offset); /* don't initialise TBG or SLEW on 2nd generation chips */ if (is_gen2) diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index fd80bcf1b236..33716b00c6b7 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -334,7 +334,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) break; } - rc = ata_pci_prepare_native_host(pdev, ppi, &host); + rc = ata_pci_prepare_sff_host(pdev, ppi, &host); if (rc) return rc; diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index aca71819f6e8..b52f83ab056a 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -213,7 +213,7 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) host->private_data = hpriv; /* the first two ports are standard SFF */ - rc = ata_pci_init_native_host(host); + rc = ata_pci_init_sff_host(host); if (rc) return rc; diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index a4c0832033d8..c4124475f754 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -412,7 +412,7 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) struct ata_host *host; int rc; - rc = ata_pci_prepare_native_host(pdev, ppi, &host); + rc = ata_pci_prepare_sff_host(pdev, ppi, &host); if (rc) return rc; *r_host = host; diff --git a/include/linux/ata.h b/include/linux/ata.h index 407dc7e098bc..b5a20162af32 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -164,6 +164,8 @@ enum { ATA_CMD_SET_MAX = 0xF9, ATA_CMD_SET_MAX_EXT = 0x37, ATA_CMD_READ_LOG_EXT = 0x2f, + ATA_CMD_PMP_READ = 0xE4, + ATA_CMD_PMP_WRITE = 0xE8, /* READ_LOG_EXT pages */ ATA_LOG_SATA_NCQ = 0x10, @@ -212,6 +214,28 @@ enum { 0=to device, 1=to host */ ATAPI_CDB_LEN = 16, + /* PMP stuff */ + SATA_PMP_MAX_PORTS = 15, + SATA_PMP_CTRL_PORT = 15, + + SATA_PMP_GSCR_DWORDS = 128, + SATA_PMP_GSCR_PROD_ID = 0, + SATA_PMP_GSCR_REV = 1, + SATA_PMP_GSCR_PORT_INFO = 2, + SATA_PMP_GSCR_ERROR = 32, + SATA_PMP_GSCR_ERROR_EN = 33, + SATA_PMP_GSCR_FEAT = 64, + SATA_PMP_GSCR_FEAT_EN = 96, + + SATA_PMP_PSCR_STATUS = 0, + SATA_PMP_PSCR_ERROR = 1, + SATA_PMP_PSCR_CONTROL = 2, + + SATA_PMP_FEAT_BIST = (1 << 0), + SATA_PMP_FEAT_PMREQ = (1 << 1), + SATA_PMP_FEAT_DYNSSC = (1 << 2), + SATA_PMP_FEAT_NOTIFY = (1 << 3), + /* cable types */ ATA_CBL_NONE = 0, ATA_CBL_PATA40 = 1, @@ -418,4 +442,9 @@ static inline int lba_48_ok(u64 block, u32 n_block) return ((block + n_block - 1) < ((u64)1 << 48)) && (n_block <= 65536); } +#define sata_pmp_gscr_vendor(gscr) ((gscr)[SATA_PMP_GSCR_PROD_ID] & 0xffff) +#define sata_pmp_gscr_devid(gscr) ((gscr)[SATA_PMP_GSCR_PROD_ID] >> 16) +#define sata_pmp_gscr_rev(gscr) (((gscr)[SATA_PMP_GSCR_REV] >> 8) & 0xff) +#define sata_pmp_gscr_ports(gscr) ((gscr)[SATA_PMP_GSCR_PORT_INFO] & 0xf) + #endif /* __LINUX_ATA_H__ */ diff --git a/include/linux/libata.h b/include/linux/libata.h index a3df64677ac3..47cd2a1c5544 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -196,7 +196,6 @@ enum { ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */ ATA_PFLAG_INITIALIZING = (1 << 7), /* being initialized, don't touch */ - ATA_PFLAG_FLUSH_PORT_TASK = (1 << 16), /* flush port task */ ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */ ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ ATA_PFLAG_GTM_VALID = (1 << 19), /* acpi_gtm data valid */ @@ -435,6 +434,7 @@ struct ata_device { struct ata_port *ap; unsigned int devno; /* 0 or 1 */ unsigned long flags; /* ATA_DFLAG_xxx */ + unsigned int horkage; /* List of broken features */ struct scsi_device *sdev; /* attached SCSI device */ #ifdef CONFIG_ATA_ACPI acpi_handle acpi_handle; @@ -466,7 +466,6 @@ struct ata_device { /* error history */ struct ata_ering ering; int spdn_cnt; - unsigned int horkage; /* List of broken features */ }; /* Offset into struct ata_device. Fields above it are maintained @@ -794,7 +793,6 @@ extern void ata_id_string(const u16 *id, unsigned char *s, extern void ata_id_c_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); extern void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown); -extern unsigned long ata_device_blacklisted(const struct ata_device *dev); extern void ata_bmdma_setup (struct ata_queued_cmd *qc); extern void ata_bmdma_start (struct ata_queued_cmd *qc); extern void ata_bmdma_stop(struct ata_queued_cmd *qc); @@ -871,11 +869,11 @@ struct pci_bits { unsigned long val; }; -extern int ata_pci_init_native_host(struct ata_host *host); +extern int ata_pci_init_sff_host(struct ata_host *host); extern int ata_pci_init_bmdma(struct ata_host *host); -extern int ata_pci_prepare_native_host(struct pci_dev *pdev, - const struct ata_port_info * const * ppi, - struct ata_host **r_host); +extern int ata_pci_prepare_sff_host(struct pci_dev *pdev, + const struct ata_port_info * const * ppi, + struct ata_host **r_host); extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits); extern unsigned long ata_pci_default_filter(struct ata_device *, unsigned long); #endif /* CONFIG_PCI */ |