diff options
| -rw-r--r-- | Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt | 14 | ||||
| -rw-r--r-- | arch/arm/boot/dts/highbank.dts | 6 | ||||
| -rw-r--r-- | drivers/edac/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/edac/Makefile | 2 | ||||
| -rw-r--r-- | drivers/edac/highbank_mc_edac.c | 264 |
5 files changed, 294 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt b/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt new file mode 100644 index 000000000000..f770ac0893d4 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt @@ -0,0 +1,14 @@ +Calxeda DDR memory controller + +Properties: +- compatible : Should be "calxeda,hb-ddr-ctrl" +- reg : Address and size for DDR controller registers. +- interrupts : Interrupt for DDR controller. + +Example: + + memory-controller@fff00000 { + compatible = "calxeda,hb-ddr-ctrl"; + reg = <0xfff00000 0x1000>; + interrupts = <0 91 4>; + }; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 83e72294aefb..d4b4941c78e8 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -118,6 +118,12 @@ interrupts = <0 90 4>; }; + memory-controller@fff00000 { + compatible = "calxeda,hb-ddr-ctrl"; + reg = <0xfff00000 0x1000>; + interrupts = <0 91 4>; + }; + ipc@fff20000 { compatible = "arm,pl320", "arm,primecell"; reg = <0xfff20000 0x1000>; diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 3b3f84ff351f..f7efa8b282f1 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -7,7 +7,7 @@ menuconfig EDAC bool "EDAC (Error Detection And Correction) reporting" depends on HAS_IOMEM - depends on X86 || PPC || TILE + depends on X86 || PPC || TILE || ARM help EDAC is designed to report errors in the core system. These are low-level errors that are reported in the CPU or @@ -302,4 +302,11 @@ config EDAC_TILE Support for error detection and correction on the Tilera memory controller. +config EDAC_HIGHBANK_MC + tristate "Highbank Memory Controller" + depends on EDAC_MM_EDAC && ARCH_HIGHBANK + help + Support for error detection and correction on the + Calxeda Highbank memory controller. + endif # EDAC diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index 196a63dd37c5..44f2044d4079 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -55,3 +55,5 @@ obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o obj-$(CONFIG_EDAC_TILE) += tile_edac.o + +obj-$(CONFIG_EDAC_HIGHBANK_MC) += highbank_mc_edac.o diff --git a/drivers/edac/highbank_mc_edac.c b/drivers/edac/highbank_mc_edac.c new file mode 100644 index 000000000000..c769f477fd22 --- /dev/null +++ b/drivers/edac/highbank_mc_edac.c @@ -0,0 +1,264 @@ +/* + * Copyright 2011-2012 Calxeda, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/edac.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <linux/uaccess.h> + +#include "edac_core.h" +#include "edac_module.h" + +/* DDR Ctrlr Error Registers */ +#define HB_DDR_ECC_OPT 0x128 +#define HB_DDR_ECC_U_ERR_ADDR 0x130 +#define HB_DDR_ECC_U_ERR_STAT 0x134 +#define HB_DDR_ECC_U_ERR_DATAL 0x138 +#define HB_DDR_ECC_U_ERR_DATAH 0x13c +#define HB_DDR_ECC_C_ERR_ADDR 0x140 +#define HB_DDR_ECC_C_ERR_STAT 0x144 +#define HB_DDR_ECC_C_ERR_DATAL 0x148 +#define HB_DDR_ECC_C_ERR_DATAH 0x14c +#define HB_DDR_ECC_INT_STATUS 0x180 +#define HB_DDR_ECC_INT_ACK 0x184 +#define HB_DDR_ECC_U_ERR_ID 0x424 +#define HB_DDR_ECC_C_ERR_ID 0x428 + +#define HB_DDR_ECC_INT_STAT_CE 0x8 +#define HB_DDR_ECC_INT_STAT_DOUBLE_CE 0x10 +#define HB_DDR_ECC_INT_STAT_UE 0x20 +#define HB_DDR_ECC_INT_STAT_DOUBLE_UE 0x40 + +#define HB_DDR_ECC_OPT_MODE_MASK 0x3 +#define HB_DDR_ECC_OPT_FWC 0x100 +#define HB_DDR_ECC_OPT_XOR_SHIFT 16 + +struct hb_mc_drvdata { + void __iomem *mc_vbase; +}; + +static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id) +{ + struct mem_ctl_info *mci = dev_id; + struct hb_mc_drvdata *drvdata = mci->pvt_info; + u32 status, err_addr; + + /* Read the interrupt status register */ + status = readl(drvdata->mc_vbase + HB_DDR_ECC_INT_STATUS); + + if (status & HB_DDR_ECC_INT_STAT_UE) { + err_addr = readl(drvdata->mc_vbase + HB_DDR_ECC_U_ERR_ADDR); + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + err_addr >> PAGE_SHIFT, + err_addr & ~PAGE_MASK, 0, + 0, 0, -1, + mci->ctl_name, ""); + } + if (status & HB_DDR_ECC_INT_STAT_CE) { + u32 syndrome = readl(drvdata->mc_vbase + HB_DDR_ECC_C_ERR_STAT); + syndrome = (syndrome >> 8) & 0xff; + err_addr = readl(drvdata->mc_vbase + HB_DDR_ECC_C_ERR_ADDR); + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + err_addr >> PAGE_SHIFT, + err_addr & ~PAGE_MASK, syndrome, + 0, 0, -1, + mci->ctl_name, ""); + } + + /* clear the error, clears the interrupt */ + writel(status, drvdata->mc_vbase + HB_DDR_ECC_INT_ACK); + return IRQ_HANDLED; +} + +#ifdef CONFIG_EDAC_DEBUG +static ssize_t highbank_mc_err_inject_write(struct file *file, + const char __user *data, + size_t count, loff_t *ppos) +{ + struct mem_ctl_info *mci = file->private_data; + struct hb_mc_drvdata *pdata = mci->pvt_info; + char buf[32]; + size_t buf_size; + u32 reg; + u8 synd; + + buf_size = min(count, (sizeof(buf)-1)); + if (copy_from_user(buf, data, buf_size)) + return -EFAULT; + buf[buf_size] = 0; + + if (!kstrtou8(buf, 16, &synd)) { + reg = readl(pdata->mc_vbase + HB_DDR_ECC_OPT); + reg &= HB_DDR_ECC_OPT_MODE_MASK; + reg |= (synd << HB_DDR_ECC_OPT_XOR_SHIFT) | HB_DDR_ECC_OPT_FWC; + writel(reg, pdata->mc_vbase + HB_DDR_ECC_OPT); + } + + return count; +} + +static int debugfs_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +static const struct file_operations highbank_mc_debug_inject_fops = { + .open = debugfs_open, + .write = highbank_mc_err_inject_write, + .llseek = generic_file_llseek, +}; + +static void __devinit highbank_mc_create_debugfs_nodes(struct mem_ctl_info *mci) +{ + if (mci->debugfs) + debugfs_create_file("inject_ctrl", S_IWUSR, mci->debugfs, mci, + &highbank_mc_debug_inject_fops); +; +} +#else +static void __devinit highbank_mc_create_debugfs_nodes(struct mem_ctl_info *mci) +{} +#endif + +static int __devinit highbank_mc_probe(struct platform_device *pdev) +{ + struct edac_mc_layer layers[2]; + struct mem_ctl_info *mci; + struct hb_mc_drvdata *drvdata; + struct dimm_info *dimm; + struct resource *r; + u32 control; + int irq; + int res = 0; + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = 1; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = 1; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, + sizeof(struct hb_mc_drvdata)); + if (!mci) + return -ENOMEM; + + mci->pdev = &pdev->dev; + drvdata = mci->pvt_info; + platform_set_drvdata(pdev, mci); + + if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) + return -ENOMEM; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "Unable to get mem resource\n"); + res = -ENODEV; + goto err; + } + + if (!devm_request_mem_region(&pdev->dev, r->start, + resource_size(r), dev_name(&pdev->dev))) { + dev_err(&pdev->dev, "Error while requesting mem region\n"); + res = -EBUSY; + goto err; + } + + drvdata->mc_vbase = devm_ioremap(&pdev->dev, + r->start, resource_size(r)); + if (!drvdata->mc_vbase) { + dev_err(&pdev->dev, "Unable to map regs\n"); + res = -ENOMEM; + goto err; + } + + control = readl(drvdata->mc_vbase + HB_DDR_ECC_OPT) & 0x3; + if (!control || (control == 0x2)) { + dev_err(&pdev->dev, "No ECC present, or ECC disabled\n"); + res = -ENODEV; + goto err; + } + + irq = platform_get_irq(pdev, 0); + res = devm_request_irq(&pdev->dev, irq, highbank_mc_err_handler, + 0, dev_name(&pdev->dev), mci); + if (res < 0) { + dev_err(&pdev->dev, "Unable to request irq %d\n", irq); + goto err; + } + + mci->mtype_cap = MEM_FLAG_DDR3; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + mci->mod_name = dev_name(&pdev->dev); + mci->mod_ver = "1"; + mci->ctl_name = dev_name(&pdev->dev); + mci->scrub_mode = SCRUB_SW_SRC; + + /* Only a single 4GB DIMM is supported */ + dimm = *mci->dimms; + dimm->nr_pages = (~0UL >> PAGE_SHIFT) + 1; + dimm->grain = 8; + dimm->dtype = DEV_X8; + dimm->mtype = MEM_DDR3; + dimm->edac_mode = EDAC_SECDED; + + res = edac_mc_add_mc(mci); + if (res < 0) + goto err; + + highbank_mc_create_debugfs_nodes(mci); + + devres_close_group(&pdev->dev, NULL); + return 0; +err: + devres_release_group(&pdev->dev, NULL); + edac_mc_free(mci); + return res; +} + +static int highbank_mc_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + edac_mc_del_mc(&pdev->dev); + edac_mc_free(mci); + return 0; +} + +static const struct of_device_id hb_ddr_ctrl_of_match[] = { + { .compatible = "calxeda,hb-ddr-ctrl", }, + {}, +}; +MODULE_DEVICE_TABLE(of, hb_ddr_ctrl_of_match); + +static struct platform_driver highbank_mc_edac_driver = { + .probe = highbank_mc_probe, + .remove = highbank_mc_remove, + .driver = { + .name = "hb_mc_edac", + .of_match_table = hb_ddr_ctrl_of_match, + }, +}; + +module_platform_driver(highbank_mc_edac_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Calxeda, Inc."); +MODULE_DESCRIPTION("EDAC Driver for Calxeda Highbank"); |