diff options
| -rw-r--r-- | drivers/pcmcia/cardbus.c | 5 | ||||
| -rw-r--r-- | drivers/pcmcia/ti113x.h | 86 | ||||
| -rw-r--r-- | drivers/pcmcia/yenta_socket.c | 15 | ||||
| -rw-r--r-- | include/linux/pci_ids.h | 5 | ||||
| -rw-r--r-- | include/pcmcia/ss.h | 9 |
5 files changed, 105 insertions, 15 deletions
diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c index 1d755e20880c..3f6d51d11374 100644 --- a/drivers/pcmcia/cardbus.c +++ b/drivers/pcmcia/cardbus.c @@ -228,6 +228,11 @@ int cb_alloc(struct pcmcia_socket * s) pci_bus_size_bridges(bus); pci_bus_assign_resources(bus); cardbus_assign_irqs(bus, s->pci_irq); + + /* socket specific tune function */ + if (s->tune_bridge) + s->tune_bridge(s, bus); + pci_enable_bridges(bus); pci_bus_add_devices(bus); diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h index fbe233e19ceb..d319f2e7d053 100644 --- a/drivers/pcmcia/ti113x.h +++ b/drivers/pcmcia/ti113x.h @@ -153,6 +153,12 @@ /* EnE test register */ #define ENE_TEST_C9 0xc9 /* 8bit */ #define ENE_TEST_C9_TLTENABLE 0x02 +#define ENE_TEST_C9_PFENABLE_F0 0x04 +#define ENE_TEST_C9_PFENABLE_F1 0x08 +#define ENE_TEST_C9_PFENABLE (ENE_TEST_C9_PFENABLE_F0 | ENE_TEST_C9_PFENABLE_F0) +#define ENE_TEST_C9_WPDISALBLE_F0 0x40 +#define ENE_TEST_C9_WPDISALBLE_F1 0x80 +#define ENE_TEST_C9_WPDISALBLE (ENE_TEST_C9_WPDISALBLE_F0 | ENE_TEST_C9_WPDISALBLE_F1) /* * Texas Instruments CardBus controller overrides. @@ -791,16 +797,6 @@ static int ti12xx_override(struct yenta_socket *socket) config_writel(socket, TI113X_SYSTEM_CONTROL, val); /* - * for EnE bridges only: clear testbit TLTEnable. this makes the - * RME Hammerfall DSP sound card working. - */ - if (socket->dev->vendor == PCI_VENDOR_ID_ENE) { - u8 test_c9 = config_readb(socket, ENE_TEST_C9); - test_c9 &= ~ENE_TEST_C9_TLTENABLE; - config_writeb(socket, ENE_TEST_C9, test_c9); - } - - /* * Yenta expects controllers to use CSCINT to route * CSC interrupts to PCI rather than INTVAL. */ @@ -841,5 +837,75 @@ static int ti1250_override(struct yenta_socket *socket) return ti12xx_override(socket); } + +/** + * EnE specific part. EnE bridges are register compatible with TI bridges but + * have their own test registers and more important their own little problems. + * Some fixup code to make everybody happy (TM). + */ + +/** + * set/clear various test bits: + * Defaults to clear the bit. + * - mask (u8) defines what bits to change + * - bits (u8) is the values to change them to + * -> it's + * current = (current & ~mask) | bits + */ +/* pci ids of devices that wants to have the bit set */ +#define DEVID(_vend,_dev,_subvend,_subdev,mask,bits) { \ + .vendor = _vend, \ + .device = _dev, \ + .subvendor = _subvend, \ + .subdevice = _subdev, \ + .driver_data = ((mask) << 8 | (bits)), \ + } +static struct pci_device_id ene_tune_tbl[] = { + /* Echo Audio products based on motorola DSP56301 and DSP56361 */ + DEVID(PCI_VENDOR_ID_MOTOROLA, 0x1801, 0xECC0, PCI_ANY_ID, + ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE), + DEVID(PCI_VENDOR_ID_MOTOROLA, 0x3410, 0xECC0, PCI_ANY_ID, + ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE), + + {} +}; + +static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus) +{ + struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); + struct pci_dev *dev; + struct pci_device_id *id = NULL; + u8 test_c9, old_c9, mask, bits; + + list_for_each_entry(dev, &bus->devices, bus_list) { + id = (struct pci_device_id *) pci_match_id(ene_tune_tbl, dev); + if (id) + break; + } + + test_c9 = old_c9 = config_readb(socket, ENE_TEST_C9); + if (id) { + mask = (id->driver_data >> 8) & 0xFF; + bits = id->driver_data & 0xFF; + + test_c9 = (test_c9 & ~mask) | bits; + } + else + /* default to clear TLTEnable bit, old behaviour */ + test_c9 &= ~ENE_TEST_C9_TLTENABLE; + + printk(KERN_INFO "yenta EnE: chaning testregister 0xC9, %02x -> %02x\n", old_c9, test_c9); + config_writeb(socket, ENE_TEST_C9, test_c9); +} + + +static int ene_override(struct yenta_socket *socket) +{ + /* install tune_bridge() function */ + socket->socket.tune_bridge = ene_tune_bridge; + + return ti1250_override(socket); +} + #endif /* _LINUX_TI113X_H */ diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index ba4d78e5b121..fd2a6f892c41 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -819,6 +819,7 @@ enum { CARDBUS_TYPE_TOPIC95, CARDBUS_TYPE_TOPIC97, CARDBUS_TYPE_O2MICRO, + CARDBUS_TYPE_ENE, }; /* @@ -865,6 +866,12 @@ static struct cardbus_type cardbus_type[] = { .override = o2micro_override, .restore_state = o2micro_restore_state, }, + [CARDBUS_TYPE_ENE] = { + .override = ene_override, + .save_state = ti_save_state, + .restore_state = ti_restore_state, + .sock_init = ti_init, + }, }; @@ -1265,10 +1272,10 @@ static struct pci_device_id yenta_table [] = { CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1250, TI1250), CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1410, TI1250), - CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, TI12XX), - CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, TI12XX), - CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, TI1250), - CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, TI12XX), + CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, ENE), + CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, ENE), + CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, ENE), + CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, ENE), CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C465, RICOH), CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C466, RICOH), diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index b86a4b77007e..92efb2c767f9 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2187,7 +2187,12 @@ #define PCI_DEVICE_ID_ENE_1211 0x1211 #define PCI_DEVICE_ID_ENE_1225 0x1225 #define PCI_DEVICE_ID_ENE_1410 0x1410 +#define PCI_DEVICE_ID_ENE_710 0x1411 +#define PCI_DEVICE_ID_ENE_712 0x1412 #define PCI_DEVICE_ID_ENE_1420 0x1420 +#define PCI_DEVICE_ID_ENE_720 0x1421 +#define PCI_DEVICE_ID_ENE_722 0x1422 + #define PCI_VENDOR_ID_CHELSIO 0x1425 #define PCI_VENDOR_ID_MIPS 0x153f diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h index 0f7aacc33fe9..c8592c7e8eaa 100644 --- a/include/pcmcia/ss.h +++ b/include/pcmcia/ss.h @@ -21,6 +21,9 @@ #include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/bulkmem.h> +#ifdef CONFIG_CARDBUS +#include <linux/pci.h> +#endif /* Definitions for card status flags for GetStatus */ #define SS_WRPROT 0x0001 @@ -233,7 +236,11 @@ struct pcmcia_socket { /* so is power hook */ int (*power_hook)(struct pcmcia_socket *sock, int operation); - +#ifdef CONFIG_CARDBUS + /* allows tuning the CB bridge before loading driver for the CB card */ + void (*tune_bridge)(struct pcmcia_socket *sock, struct pci_bus *bus); +#endif + /* state thread */ struct semaphore skt_sem; /* protects socket h/w state */ |