summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/usb/serial/ch341.c6
-rw-r--r--drivers/usb/serial/cyberjack.c2
-rw-r--r--drivers/usb/serial/cypress_m8.c2
-rw-r--r--drivers/usb/serial/iuu_phoenix.c2
-rw-r--r--drivers/usb/serial/keyspan_pda.c2
-rw-r--r--drivers/usb/serial/kl5kusb105.c4
-rw-r--r--drivers/usb/serial/kobil_sct.c3
-rw-r--r--drivers/usb/serial/mos7720.c12
-rw-r--r--drivers/usb/serial/mos7840.c4
-rw-r--r--drivers/usb/serial/quatech2.c2
-rw-r--r--drivers/usb/serial/spcp8x5.c7
-rw-r--r--drivers/usb/serial/symbolserial.c4
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c4
-rw-r--r--drivers/usb/serial/usb-serial.c4
14 files changed, 28 insertions, 30 deletions
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 82371f61f23d..2d72aa3564a3 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -323,11 +323,11 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
if (r)
goto out;
- dev_dbg(&port->dev, "%s - submitting interrupt urb", __func__);
+ dev_dbg(&port->dev, "%s - submitting interrupt urb\n", __func__);
r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (r) {
- dev_err(&port->dev, "%s - failed submitting interrupt urb,"
- " error %d\n", __func__, r);
+ dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n",
+ __func__, r);
ch341_close(port);
goto out;
}
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 0ac3b3b3236c..2916dea3ede8 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -220,7 +220,7 @@ static int cyberjack_write(struct tty_struct *tty,
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev,
- "%s - failed submitting write urb, error %d",
+ "%s - failed submitting write urb, error %d\n",
__func__, result);
/* Throw away data. No better idea what to do with it. */
priv->wrfilled = 0;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 634f0d6605ed..01bf53392819 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -279,7 +279,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
* the generic firmware, but are not used with
* NMEA and SiRF protocols */
dev_dbg(&port->dev,
- "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS",
+ "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS\n",
__func__, new_rate);
return -1;
}
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index d00dae17d520..5ad4a0fb4b26 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1151,7 +1151,7 @@ static ssize_t vcc_mode_store(struct device *dev,
goto fail_store_vcc_mode;
}
- dev_dbg(dev, "%s: setting vcc_mode = %ld", __func__, v);
+ dev_dbg(dev, "%s: setting vcc_mode = %ld\n", __func__, v);
if ((v != 3) && (v != 5)) {
dev_err(dev, "%s - vcc_mode %ld is invalid\n", __func__, v);
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index e972412b614b..742d827f876c 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -189,7 +189,7 @@ exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(&port->dev,
- "%s - usb_submit_urb failed with result %d",
+ "%s - usb_submit_urb failed with result %d\n",
__func__, retval);
}
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index c88cc4966b23..d7440b7557af 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -201,7 +201,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
else {
status = get_unaligned_le16(status_buf);
- dev_info(&port->serial->dev->dev, "read status %x %x",
+ dev_info(&port->serial->dev->dev, "read status %x %x\n",
status_buf[0], status_buf[1]);
*line_state_p = klsi_105_status2linestate(status);
@@ -464,7 +464,7 @@ static void klsi_105_set_termios(struct tty_struct *tty,
priv->cfg.baudrate = kl5kusb105a_sio_b115200;
break;
default:
- dev_dbg(dev, "KLSI USB->Serial converter: unsupported baudrate request, using default of 9600");
+ dev_dbg(dev, "unsupported baudrate, using 9600\n");
priv->cfg.baudrate = kl5kusb105a_sio_b9600;
baud = 9600;
break;
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 618c1c1f227e..fee242387f55 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -557,7 +557,8 @@ static int kobil_ioctl(struct tty_struct *tty,
);
dev_dbg(&port->dev,
- "%s - Send reset_all_queues (FLUSH) URB returns: %i", __func__, result);
+ "%s - Send reset_all_queues (FLUSH) URB returns: %i\n",
+ __func__, result);
kfree(transfer_buffer);
return (result < 0) ? -EIO: 0;
default:
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 4eb277225a77..dfd728a263d2 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -209,7 +209,7 @@ static int write_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
index, NULL, 0, MOS_WDR_TIMEOUT);
if (status < 0)
dev_err(&usbdev->dev,
- "mos7720: usb_control_msg() failed: %d", status);
+ "mos7720: usb_control_msg() failed: %d\n", status);
return status;
}
@@ -240,7 +240,7 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
*data = *buf;
else if (status < 0)
dev_err(&usbdev->dev,
- "mos7720: usb_control_msg() failed: %d", status);
+ "mos7720: usb_control_msg() failed: %d\n", status);
kfree(buf);
return status;
@@ -399,7 +399,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
&mos_parport->deferred_urbs);
spin_unlock_irqrestore(&mos_parport->listlock, flags);
tasklet_schedule(&mos_parport->urb_tasklet);
- dev_dbg(&usbdev->dev, "tasklet scheduled");
+ dev_dbg(&usbdev->dev, "tasklet scheduled\n");
return 0;
}
@@ -418,7 +418,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
mutex_unlock(&serial->disc_mutex);
if (ret_val) {
dev_err(&usbdev->dev,
- "%s: submit_urb() failed: %d", __func__, ret_val);
+ "%s: submit_urb() failed: %d\n", __func__, ret_val);
spin_lock_irqsave(&mos_parport->listlock, flags);
list_del(&urbtrack->urblist_entry);
spin_unlock_irqrestore(&mos_parport->listlock, flags);
@@ -656,7 +656,7 @@ static size_t parport_mos7715_write_compat(struct parport *pp,
parport_epilogue(pp);
if (retval) {
dev_err(&mos_parport->serial->dev->dev,
- "mos7720: usb_bulk_msg() failed: %d", retval);
+ "mos7720: usb_bulk_msg() failed: %d\n", retval);
return 0;
}
return actual_len;
@@ -875,7 +875,7 @@ static void mos7715_interrupt_callback(struct urb *urb)
if (!(iir & 0x01)) { /* serial port interrupt pending */
switch (iir & 0x0f) {
case SERIAL_IIR_RLS:
- dev_dbg(dev, "Serial Port: Receiver status error or address bit detected in 9-bit mode\n\n");
+ dev_dbg(dev, "Serial Port: Receiver status error or address bit detected in 9-bit mode\n");
break;
case SERIAL_IIR_CTI:
dev_dbg(dev, "Serial Port: Receiver time out\n");
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index e9d967ff521b..393be562d875 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -522,11 +522,11 @@ static void mos7840_set_led_callback(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
/* This urb is terminated, clean up */
- dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d",
+ dev_dbg(&urb->dev->dev, "%s - urb shutting down: %d\n",
__func__, urb->status);
break;
default:
- dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d",
+ dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n",
__func__, urb->status);
}
}
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 7725ed261ed6..504f5bff79c0 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -372,7 +372,7 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
device_port, data, 2, QT2_USB_TIMEOUT);
if (status < 0) {
- dev_err(&port->dev, "%s - open port failed %i", __func__,
+ dev_err(&port->dev, "%s - open port failed %i\n", __func__,
status);
kfree(data);
return status;
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 4ec04f73c800..ef0dbf0703c5 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -220,9 +220,9 @@ static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
GET_UART_STATUS, GET_UART_STATUS_TYPE,
0, GET_UART_STATUS_MSR, buf, 1, 100);
if (ret < 0)
- dev_err(&port->dev, "failed to get modem status: %d", ret);
+ dev_err(&port->dev, "failed to get modem status: %d\n", ret);
- dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x", ret, *buf);
+ dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x\n", ret, *buf);
*status = *buf;
kfree(buf);
@@ -342,8 +342,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
case 1000000:
buf[0] = 0x0b; break;
default:
- dev_err(&port->dev, "spcp825 driver does not support the "
- "baudrate requested, using default of 9600.\n");
+ dev_err(&port->dev, "unsupported baudrate, using 9600\n");
}
/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 9fa7dd413e83..8fceec7298e0 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -74,9 +74,7 @@ static void symbol_int_callback(struct urb *urb)
tty_insert_flip_string(&port->port, &data[1], data_length);
tty_flip_buffer_push(&port->port);
} else {
- dev_dbg(&port->dev,
- "Improper amount of data received from the device, "
- "%d bytes", urb->actual_length);
+ dev_dbg(&port->dev, "%s - short packet\n", __func__);
}
exit:
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index ec7cea585663..3dd3ff8c50d3 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -293,7 +293,7 @@ static int ti_startup(struct usb_serial *serial)
int status;
dev_dbg(&dev->dev,
- "%s - product 0x%4X, num configurations %d, configuration value %d",
+ "%s - product 0x%4X, num configurations %d, configuration value %d\n",
__func__, le16_to_cpu(dev->descriptor.idProduct),
dev->descriptor.bNumConfigurations,
dev->actconfig->desc.bConfigurationValue);
@@ -803,7 +803,7 @@ static void ti_set_termios(struct tty_struct *tty,
tty_encode_baud_rate(tty, baud, baud);
dev_dbg(&port->dev,
- "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d",
+ "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n",
__func__, baud, config->wBaudRate, config->wFlags,
config->bDataBits, config->bParity, config->bStopBits,
config->cXon, config->cXoff, config->bUartMode);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4c3aeaf56dc1..81fc0dfcfdcf 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -868,7 +868,7 @@ static int usb_serial_probe(struct usb_interface *interface,
max_endpoints = max(max_endpoints, (int)serial->num_ports);
serial->num_port_pointers = max_endpoints;
- dev_dbg(ddev, "setting up %d port structures for this device", max_endpoints);
+ dev_dbg(ddev, "setting up %d port structure(s)\n", max_endpoints);
for (i = 0; i < max_endpoints; ++i) {
port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
if (!port)
@@ -1033,7 +1033,7 @@ static int usb_serial_probe(struct usb_interface *interface,
for (i = 0; i < num_ports; ++i) {
port = serial->port[i];
dev_set_name(&port->dev, "ttyUSB%d", port->minor);
- dev_dbg(ddev, "registering %s", dev_name(&port->dev));
+ dev_dbg(ddev, "registering %s\n", dev_name(&port->dev));
device_enable_async_suspend(&port->dev);
retval = device_add(&port->dev);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 11:50:59 +0100