diff options
| -rw-r--r-- | Documentation/devicetree/bindings/memory.txt | 168 | ||||
| -rw-r--r-- | drivers/of/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/of/Makefile | 1 | ||||
| -rw-r--r-- | drivers/of/of_reserved_mem.c | 173 | ||||
| -rw-r--r-- | drivers/of/platform.c | 4 | ||||
| -rw-r--r-- | include/linux/of_reserved_mem.h | 14 |
6 files changed, 0 insertions, 366 deletions
diff --git a/Documentation/devicetree/bindings/memory.txt b/Documentation/devicetree/bindings/memory.txt deleted file mode 100644 index eb2469365593..000000000000 --- a/Documentation/devicetree/bindings/memory.txt +++ /dev/null @@ -1,168 +0,0 @@ -*** Memory binding *** - -The /memory node provides basic information about the address and size -of the physical memory. This node is usually filled or updated by the -bootloader, depending on the actual memory configuration of the given -hardware. - -The memory layout is described by the following node: - -/ { - #address-cells = <(n)>; - #size-cells = <(m)>; - memory { - device_type = "memory"; - reg = <(baseaddr1) (size1) - (baseaddr2) (size2) - ... - (baseaddrN) (sizeN)>; - }; - ... -}; - -A memory node follows the typical device tree rules for "reg" property: -n: number of cells used to store base address value -m: number of cells used to store size value -baseaddrX: defines a base address of the defined memory bank -sizeX: the size of the defined memory bank - - -More than one memory bank can be defined. - - -*** Reserved memory regions *** - -In /memory/reserved-memory node one can create child nodes describing -particular reserved (excluded from normal use) memory regions. Such -memory regions are usually designed for the special usage by various -device drivers. A good example are contiguous memory allocations or -memory sharing with other operating system on the same hardware board. -Those special memory regions might depend on the board configuration and -devices used on the target system. - -Parameters for each memory region can be encoded into the device tree -with the following convention: - -[(label):] (name) { - compatible = "linux,contiguous-memory-region", "reserved-memory-region"; - reg = <(address) (size)>; - (linux,default-contiguous-region); -}; - -compatible: one or more of: - - "linux,contiguous-memory-region" - enables binding of this - region to Contiguous Memory Allocator (special region for - contiguous memory allocations, shared with movable system - memory, Linux kernel-specific). - - "reserved-memory-region" - compatibility is defined, given - region is assigned for exclusive usage for by the respective - devices. - -reg: standard property defining the base address and size of - the memory region - -linux,default-contiguous-region: property indicating that the region - is the default region for all contiguous memory - allocations, Linux specific (optional) - -It is optional to specify the base address, so if one wants to use -autoconfiguration of the base address, '0' can be specified as a base -address in the 'reg' property. - -The /memory/reserved-memory node must contain the same #address-cells -and #size-cells value as the root node. - - -*** Device node's properties *** - -Once regions in the /memory/reserved-memory node have been defined, they -may be referenced by other device nodes. Bindings that wish to reference -memory regions should explicitly document their use of the following -property: - -memory-region = <&phandle_to_defined_region>; - -This property indicates that the device driver should use the memory -region pointed by the given phandle. - - -*** Example *** - -This example defines a memory consisting of 4 memory banks. 3 contiguous -regions are defined for Linux kernel, one default of all device drivers -(named contig_mem, placed at 0x72000000, 64MiB), one dedicated to the -framebuffer device (labelled display_mem, placed at 0x78000000, 8MiB) -and one for multimedia processing (labelled multimedia_mem, placed at -0x77000000, 64MiB). 'display_mem' region is then assigned to fb@12300000 -device for DMA memory allocations (Linux kernel drivers will use CMA is -available or dma-exclusive usage otherwise). 'multimedia_mem' is -assigned to scaler@12500000 and codec@12600000 devices for contiguous -memory allocations when CMA driver is enabled. - -The reason for creating a separate region for framebuffer device is to -match the framebuffer base address to the one configured by bootloader, -so once Linux kernel drivers starts no glitches on the displayed boot -logo appears. Scaller and codec drivers should share the memory -allocations. - -/ { - #address-cells = <1>; - #size-cells = <1>; - - /* ... */ - - memory { - reg = <0x40000000 0x10000000 - 0x50000000 0x10000000 - 0x60000000 0x10000000 - 0x70000000 0x10000000>; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - - /* - * global autoconfigured region for contiguous allocations - * (used only with Contiguous Memory Allocator) - */ - contig_region@0 { - compatible = "linux,contiguous-memory-region"; - reg = <0x0 0x4000000>; - linux,default-contiguous-region; - }; - - /* - * special region for framebuffer - */ - display_region: region@78000000 { - compatible = "linux,contiguous-memory-region", "reserved-memory-region"; - reg = <0x78000000 0x800000>; - }; - - /* - * special region for multimedia processing devices - */ - multimedia_region: region@77000000 { - compatible = "linux,contiguous-memory-region"; - reg = <0x77000000 0x4000000>; - }; - }; - }; - - /* ... */ - - fb0: fb@12300000 { - status = "okay"; - memory-region = <&display_region>; - }; - - scaler: scaler@12500000 { - status = "okay"; - memory-region = <&multimedia_region>; - }; - - codec: codec@12600000 { - status = "okay"; - memory-region = <&multimedia_region>; - }; -}; diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index 9d2009a9004d..78cc76053328 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -74,10 +74,4 @@ config OF_MTD depends on MTD def_bool y -config OF_RESERVED_MEM - depends on OF_FLATTREE && (DMA_CMA || (HAVE_GENERIC_DMA_COHERENT && HAVE_MEMBLOCK)) - def_bool y - help - Initialization code for DMA reserved memory - endmenu # OF diff --git a/drivers/of/Makefile b/drivers/of/Makefile index ed9660adad77..efd05102c405 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -9,4 +9,3 @@ obj-$(CONFIG_OF_MDIO) += of_mdio.o obj-$(CONFIG_OF_PCI) += of_pci.o obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o obj-$(CONFIG_OF_MTD) += of_mtd.o -obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c deleted file mode 100644 index 0fe40c7d6904..000000000000 --- a/drivers/of/of_reserved_mem.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Device tree based initialization code for reserved memory. - * - * Copyright (c) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * Author: Marek Szyprowski <m.szyprowski@samsung.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License or (at your optional) any later version of the license. - */ - -#include <linux/memblock.h> -#include <linux/err.h> -#include <linux/of.h> -#include <linux/of_fdt.h> -#include <linux/of_platform.h> -#include <linux/mm.h> -#include <linux/sizes.h> -#include <linux/mm_types.h> -#include <linux/dma-contiguous.h> -#include <linux/dma-mapping.h> -#include <linux/of_reserved_mem.h> - -#define MAX_RESERVED_REGIONS 16 -struct reserved_mem { - phys_addr_t base; - unsigned long size; - struct cma *cma; - char name[32]; -}; -static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS]; -static int reserved_mem_count; - -static int __init fdt_scan_reserved_mem(unsigned long node, const char *uname, - int depth, void *data) -{ - struct reserved_mem *rmem = &reserved_mem[reserved_mem_count]; - phys_addr_t base, size; - int is_cma, is_reserved; - unsigned long len; - const char *status; - __be32 *prop; - - is_cma = IS_ENABLED(CONFIG_DMA_CMA) && - of_flat_dt_is_compatible(node, "linux,contiguous-memory-region"); - is_reserved = of_flat_dt_is_compatible(node, "reserved-memory-region"); - - if (!is_reserved && !is_cma) { - /* ignore node and scan next one */ - return 0; - } - - status = of_get_flat_dt_prop(node, "status", &len); - if (status && strcmp(status, "okay") != 0) { - /* ignore disabled node nad scan next one */ - return 0; - } - - prop = of_get_flat_dt_prop(node, "reg", &len); - if (!prop || (len < (dt_root_size_cells + dt_root_addr_cells) * - sizeof(__be32))) { - pr_err("Reserved mem: node %s, incorrect \"reg\" property\n", - uname); - /* ignore node and scan next one */ - return 0; - } - base = dt_mem_next_cell(dt_root_addr_cells, &prop); - size = dt_mem_next_cell(dt_root_size_cells, &prop); - - if (!size) { - /* ignore node and scan next one */ - return 0; - } - - pr_info("Reserved mem: found %s, memory base %lx, size %ld MiB\n", - uname, (unsigned long)base, (unsigned long)size / SZ_1M); - - if (reserved_mem_count == ARRAY_SIZE(reserved_mem)) - return -ENOSPC; - - rmem->base = base; - rmem->size = size; - strlcpy(rmem->name, uname, sizeof(rmem->name)); - - if (is_cma) { - struct cma *cma; - if (dma_contiguous_reserve_area(size, base, 0, &cma) == 0) { - rmem->cma = cma; - reserved_mem_count++; - if (of_get_flat_dt_prop(node, - "linux,default-contiguous-region", - NULL)) - dma_contiguous_set_default(cma); - } - } else if (is_reserved) { - if (memblock_remove(base, size) == 0) - reserved_mem_count++; - else - pr_err("Failed to reserve memory for %s\n", uname); - } - - return 0; -} - -static struct reserved_mem *get_dma_memory_region(struct device *dev) -{ - struct device_node *node; - const char *name; - int i; - - node = of_parse_phandle(dev->of_node, "memory-region", 0); - if (!node) - return NULL; - - name = kbasename(node->full_name); - for (i = 0; i < reserved_mem_count; i++) - if (strcmp(name, reserved_mem[i].name) == 0) - return &reserved_mem[i]; - return NULL; -} - -/** - * of_reserved_mem_device_init() - assign reserved memory region to given device - * - * This function assign memory region pointed by "memory-region" device tree - * property to the given device. - */ -void of_reserved_mem_device_init(struct device *dev) -{ - struct reserved_mem *region = get_dma_memory_region(dev); - if (!region) - return; - - if (region->cma) { - dev_set_cma_area(dev, region->cma); - pr_info("Assigned CMA %s to %s device\n", region->name, - dev_name(dev)); - } else { - if (dma_declare_coherent_memory(dev, region->base, region->base, - region->size, DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) != 0) - pr_info("Declared reserved memory %s to %s device\n", - region->name, dev_name(dev)); - } -} - -/** - * of_reserved_mem_device_release() - release reserved memory device structures - * - * This function releases structures allocated for memory region handling for - * the given device. - */ -void of_reserved_mem_device_release(struct device *dev) -{ - struct reserved_mem *region = get_dma_memory_region(dev); - if (!region && !region->cma) - dma_release_declared_memory(dev); -} - -/** - * early_init_dt_scan_reserved_mem() - create reserved memory regions - * - * This function grabs memory from early allocator for device exclusive use - * defined in device tree structures. It should be called by arch specific code - * once the early allocator (memblock) has been activated and all other - * subsystems have already allocated/reserved memory. - */ -void __init early_init_dt_scan_reserved_mem(void) -{ - of_scan_flat_dt_by_path("/memory/reserved-memory", - fdt_scan_reserved_mem, NULL); -} diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 9b439ac63d8e..f6dcde220821 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -21,7 +21,6 @@ #include <linux/of_device.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/of_reserved_mem.h> #include <linux/platform_device.h> const struct of_device_id of_default_bus_match_table[] = { @@ -219,8 +218,6 @@ static struct platform_device *of_platform_device_create_pdata( dev->dev.bus = &platform_bus_type; dev->dev.platform_data = platform_data; - of_reserved_mem_device_init(&dev->dev); - /* We do not fill the DMA ops for platform devices by default. * This is currently the responsibility of the platform code * to do such, possibly using a device notifier @@ -228,7 +225,6 @@ static struct platform_device *of_platform_device_create_pdata( if (of_device_add(dev) != 0) { platform_device_put(dev); - of_reserved_mem_device_release(&dev->dev); return NULL; } diff --git a/include/linux/of_reserved_mem.h b/include/linux/of_reserved_mem.h deleted file mode 100644 index c84128255814..000000000000 --- a/include/linux/of_reserved_mem.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __OF_RESERVED_MEM_H -#define __OF_RESERVED_MEM_H - -#ifdef CONFIG_OF_RESERVED_MEM -void of_reserved_mem_device_init(struct device *dev); -void of_reserved_mem_device_release(struct device *dev); -void early_init_dt_scan_reserved_mem(void); -#else -static inline void of_reserved_mem_device_init(struct device *dev) { } -static inline void of_reserved_mem_device_release(struct device *dev) { } -static inline void early_init_dt_scan_reserved_mem(void) { } -#endif - -#endif /* __OF_RESERVED_MEM_H */ |