diff options
46 files changed, 3008 insertions, 1109 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 25efbaf1f59b..2443f5bb4364 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -658,11 +658,12 @@ and is between 256 and 4096 characters. It is defined in the file earlyprintk= [X86-32,X86-64,SH,BLACKFIN] earlyprintk=vga earlyprintk=serial[,ttySn[,baudrate]] + earlyprintk=dbgp Append ",keep" to not disable it when the real console takes over. - Only vga or serial at a time, not both. + Only vga or serial or usb debug port at a time. Currently only ttyS0 and ttyS1 are supported. @@ -1231,6 +1232,29 @@ and is between 256 and 4096 characters. It is defined in the file or memmap=0x10000$0x18690000 + memory_corruption_check=0/1 [X86] + Some BIOSes seem to corrupt the first 64k of + memory when doing things like suspend/resume. + Setting this option will scan the memory + looking for corruption. Enabling this will + both detect corruption and prevent the kernel + from using the memory being corrupted. + However, its intended as a diagnostic tool; if + repeatable BIOS-originated corruption always + affects the same memory, you can use memmap= + to prevent the kernel from using that memory. + + memory_corruption_check_size=size [X86] + By default it checks for corruption in the low + 64k, making this memory unavailable for normal + use. Use this parameter to scan for + corruption in more or less memory. + + memory_corruption_check_period=seconds [X86] + By default it checks for corruption every 60 + seconds. Use this parameter to check at some + other rate. 0 disables periodic checking. + memtest= [KNL,X86] Enable memtest Format: <integer> range: 0,4 : pattern number diff --git a/MAINTAINERS b/MAINTAINERS index 587f418ed00d..8bf72d378332 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -390,6 +390,11 @@ L: iommu@lists.linux-foundation.org T: git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git S: Supported +AMD MICROCODE UPDATE SUPPORT +P: Peter Oruba +M: peter.oruba@amd.com +S: Supported + AMS (Apple Motion Sensor) DRIVER P: Stelian Pop M: stelian@popies.net diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 44d4f2130d01..fc8351f374fd 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -778,23 +778,45 @@ config X86_REBOOTFIXUPS Say N otherwise. config MICROCODE - tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support" + tristate "/dev/cpu/microcode - microcode support" select FW_LOADER ---help--- If you say Y here, you will be able to update the microcode on - Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II, - Pentium III, Pentium 4, Xeon etc. You will obviously need the - actual microcode binary data itself which is not shipped with the - Linux kernel. + certain Intel and AMD processors. The Intel support is for the + IA32 family, e.g. Pentium Pro, Pentium II, Pentium III, + Pentium 4, Xeon etc. The AMD support is for family 0x10 and + 0x11 processors, e.g. Opteron, Phenom and Turion 64 Ultra. + You will obviously need the actual microcode binary data itself + which is not shipped with the Linux kernel. - For latest news and information on obtaining all the required - ingredients for this driver, check: - <http://www.urbanmyth.org/microcode/>. + This option selects the general module only, you need to select + at least one vendor specific module as well. To compile this driver as a module, choose M here: the module will be called microcode. -config MICROCODE_OLD_INTERFACE +config MICROCODE_INTEL + bool "Intel microcode patch loading support" + depends on MICROCODE + default MICROCODE + select FW_LOADER + --help--- + This options enables microcode patch loading support for Intel + processors. + + For latest news and information on obtaining all the required + Intel ingredients for this driver, check: + <http://www.urbanmyth.org/microcode/>. + +config MICROCODE_AMD + bool "AMD microcode patch loading support" + depends on MICROCODE + select FW_LOADER + --help--- + If you select this option, microcode patch loading support for AMD + processors will be enabled. + + config MICROCODE_OLD_INTERFACE def_bool y depends on MICROCODE @@ -1061,6 +1083,56 @@ config HIGHPTE low memory. Setting this option will put user-space page table entries in high memory. +config X86_CHECK_BIOS_CORRUPTION + bool "Check for low memory corruption" + help + Periodically check for memory corruption in low memory, which + is suspected to be caused by BIOS. Even when enabled in the + configuration, it is disabled at runtime. Enable it by + setting "memory_corruption_check=1" on the kernel command + line. By default it scans the low 64k of memory every 60 + seconds; see the memory_corruption_check_size and + memory_corruption_check_period parameters in + Documentation/kernel-parameters.txt to adjust this. + + When enabled with the default parameters, this option has + almost no overhead, as it reserves a relatively small amount + of memory and scans it infrequently. It both detects corruption + and prevents it from affecting the running system. + + It is, however, intended as a diagnostic tool; if repeatable + BIOS-originated corruption always affects the same memory, + you can use memmap= to prevent the kernel from using that + memory. + +config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK + bool "Set the default setting of memory_corruption_check" + depends on X86_CHECK_BIOS_CORRUPTION + default y + help + Set whether the default state of memory_corruption_check is + on or off. + +config X86_RESERVE_LOW_64K + bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen" + default y + help + Reserve the first 64K of physical RAM on BIOSes that are known + to potentially corrupt that memory range. A numbers of BIOSes are + known to utilize this area during suspend/resume, so it must not + be used by the kernel. + + Set this to N if you are absolutely sure that you trust the BIOS + to get all its memory reservations and usages right. + + If you have doubts about the BIOS (e.g. suspend/resume does not + work or there's kernel crashes after certain hardware hotplug + events) and it's not AMI or Phoenix, then you might want to enable + X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical + corruption patterns. + + Say Y if unsure. + config MATH_EMULATION bool prompt "Math emulation" if X86_32 diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index f8843c3ae77d..c5f101360520 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -420,7 +420,6 @@ config X86_DEBUGCTLMSR depends on !(MK6 || MWINCHIPC6 || MWINCHIP2 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386) menuconfig PROCESSOR_SELECT - default y bool "Supported processor vendors" if EMBEDDED help This lets you choose what x86 vendor support code your kernel @@ -430,48 +429,97 @@ config CPU_SUP_INTEL default y bool "Support Intel processors" if PROCESSOR_SELECT help - This enables extended support for Intel processors + This enables detection, tunings and quirks for Intel processors + + You need this enabled if you want your kernel to run on an + Intel CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on an Intel + CPU might render the kernel unbootable. + + If unsure, say N. config CPU_SUP_CYRIX_32 default y bool "Support Cyrix processors" if PROCESSOR_SELECT depends on !64BIT help - This enables extended support for Cyrix processors + This enables detection, tunings and quirks for Cyrix processors + + You need this enabled if you want your kernel to run on a + Cyrix CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a Cyrix + CPU might render the kernel unbootable. + + If unsure, say N. config CPU_SUP_AMD default y bool "Support AMD processors" if PROCESSOR_SELECT help - This enables extended support for AMD processors + This enables detection, tunings and quirks for AMD processors + + You need this enabled if you want your kernel to run on an + AMD CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on an AMD + CPU might render the kernel unbootable. + + If unsure, say N. config CPU_SUP_CENTAUR_32 default y bool "Support Centaur processors" if PROCESSOR_SELECT depends on !64BIT help - This enables extended support for Centaur processors + This enables detection, tunings and quirks for Centaur processors + + You need this enabled if you want your kernel to run on a + Centaur CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a Centaur + CPU might render the kernel unbootable. + + If unsure, say N. config CPU_SUP_CENTAUR_64 default y bool "Support Centaur processors" if PROCESSOR_SELECT depends on 64BIT help - This enables extended support for Centaur processors + This enables detection, tunings and quirks for Centaur processors + + You need this enabled if you want your kernel to run on a + Centaur CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a Centaur + CPU might render the kernel unbootable. + + If unsure, say N. config CPU_SUP_TRANSMETA_32 default y bool "Support Transmeta processors" if PROCESSOR_SELECT depends on !64BIT help - This enables extended support for Transmeta processors + This enables detection, tunings and quirks for Transmeta processors + + You need this enabled if you want your kernel to run on a + Transmeta CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a Transmeta + CPU might render the kernel unbootable. + + If unsure, say N. config CPU_SUP_UMC_32 default y bool "Support UMC processors" if PROCESSOR_SELECT depends on !64BIT help - This enables extended support for UMC processors + This enables detection, tunings and quirks for UMC processors + + You need this enabled if you want your kernel to run on a + UMC CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a UMC + CPU might render the kernel unbootable. + + If unsure, say N. config X86_DS bool "Debug Store support" diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 092f019e033a..2a3dfbd5e677 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -43,6 +43,19 @@ config EARLY_PRINTK with klogd/syslogd or the X server. You should normally N here, unless you want to debug such a crash. +config EARLY_PRINTK_DBGP + bool "Early printk via EHCI debug port" + default n + depends on EARLY_PRINTK && PCI + help + Write kernel log output directly into the EHCI debug port. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. For normal operation + it is not recommended because it looks ugly and doesn't cooperate + with klogd/syslogd or the X server. You should normally N here, + unless you want to debug such a crash. You need usb debug device. + config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL diff --git a/arch/x86/Makefile_32.cpu b/arch/x86/Makefile_32.cpu index e372b584e919..b72b4f753113 100644 --- a/arch/x86/Makefile_32.cpu +++ b/arch/x86/Makefile_32.cpu @@ -45,3 +45,8 @@ cflags-$(CONFIG_MGEODEGX1) += -march=pentium-mmx # cpu entries cflags-$(CONFIG_X86_GENERIC) += $(call tune,generic,$(call tune,i686)) +# Bug fix for binutils: this option is required in order to keep +# binutils from generating NOPL instructions against our will. +ifneq ($(CONFIG_X86_P6_NOP),y) +cflags-y += $(call cc-option,-Wa$(comma)-mtune=generic32,) +endif diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 7ee102f9c4f8..cd48c7210016 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -72,9 +72,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \ KBUILD_CFLAGS += $(call cc-option,-m32) KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ -$(obj)/zImage: IMAGE_OFFSET := 0x1000 $(obj)/zImage: asflags-y := $(SVGA_MODE) $(RAMDISK) -$(obj)/bzImage: IMAGE_OFFSET := 0x100000 $(obj)/bzImage: ccflags-y := -D__BIG_KERNEL__ $(obj)/bzImage: asflags-y := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__ $(obj)/bzImage: BUILDFLAGS := -b @@ -117,7 +115,7 @@ $(obj)/setup.bin: $(obj)/setup.elf FORCE $(call if_changed,objcopy) $(obj)/compressed/vmlinux: FORCE - $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@ + $(Q)$(MAKE) $(build)=$(obj)/compressed $@ # Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel FDARGS = @@ -181,6 +179,7 @@ isoimage: $(BOOTIMAGE) mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \ -no-emul-boot -boot-load-size 4 -boot-info-table \ $(obj)/isoimage + isohybrid $(obj)/image.iso 2>/dev/null || true rm -rf $(obj)/isoimage zlilo: $(BOOTIMAGE) diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index 92fdd35bd93e..1771c804e02f 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -27,9 +27,8 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) -ifeq ($(CONFIG_X86_32),y) -targets += vmlinux.bin.all vmlinux.relocs -hostprogs-y := relocs +targets += vmlinux.bin.all vmlinux.relocs relocs +hostprogs-$(CONFIG_X86_32) += relocs quiet_cmd_relocs = RELOCS $@ cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $< @@ -43,6 +42,8 @@ quiet_cmd_relocbin = BUILD $@ $(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE $(call if_changed,relocbin) +ifeq ($(CONFIG_X86_32),y) + ifdef CONFIG_RELOCATABLE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE $(call if_changed,gzip) @@ -59,6 +60,5 @@ $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T endif - $(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE $(call if_changed,ld) diff --git a/arch/x86/boot/edd.c b/arch/x86/boot/edd.c index d93cbc6464d0..1aae8f3e5ca1 100644 --- a/arch/x86/boot/edd.c +++ b/arch/x86/boot/edd.c @@ -41,6 +41,7 @@ static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig) char *mbrbuf_ptr, *mbrbuf_end; u32 buf_base, mbr_base; extern char _end[]; + u16 mbr_magic; sector_size = ei->params.bytes_per_sector; if (!sector_size) @@ -58,11 +59,15 @@ static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig) if (mbrbuf_end > (char *)(size_t)boot_params.hdr.heap_end_ptr) return -1; + memset(mbrbuf_ptr, 0, sector_size); if (read_mbr(devno, mbrbuf_ptr)) return -1; *mbrsig = *(u32 *)&mbrbuf_ptr[EDD_MBR_SIG_OFFSET]; - return 0; + mbr_magic = *(u16 *)&mbrbuf_ptr[510]; + + /* check for valid MBR magic */ + return mbr_magic == 0xAA55 ? 0 : -1; } static int get_edd_info(u8 devno, struct edd_info *ei) diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c index 401ad998ad08..1e6fe0214c85 100644 --- a/arch/x86/boot/video-vesa.c +++ b/arch/x86/boot/video-vesa.c @@ -224,7 +224,7 @@ static void vesa_store_pm_info(void) static void vesa_store_mode_params_graphics(void) { /* Tell the kernel we're in VESA graphics mode */ - boot_params.screen_info.orig_video_isVGA = 0x23; + boot_params.screen_info.orig_video_isVGA = VIDEO_TYPE_VLFB; /* Mode parameters */ boot_params.screen_info.vesa_attributes = vminfo.mode_attr; diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index ef9a52005ec9..ca226ca31288 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -1535,7 +1535,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 -CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set CONFIG_LOGO=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index e620ea6e2a7a..2c4b1c771e28 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1505,7 +1505,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 -CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set CONFIG_LOGO=y diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 7b655b5bb9ab..5098585f87ce 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -51,7 +51,6 @@ obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o obj-$(CONFIG_MCA) += mca_32.o obj-$(CONFIG_X86_MSR) += msr.o obj-$(CONFIG_X86_CPUID) += cpuid.o -obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_PCI) += early-quirks.o apm-y := apm_32.o obj-$(CONFIG_APM) += apm.o @@ -100,6 +99,11 @@ scx200-y += scx200_32.o obj-$(CONFIG_OLPC) += olpc.o +microcode-y := microcode_core.o +microcode-$(CONFIG_MICROCODE_INTEL) += microcode_intel.o +microcode-$(CONFIG_MICROCODE_AMD) += microcode_amd.o +obj-$(CONFIG_MICROCODE) += microcode.o + ### # 64 bit specific files ifeq ($(CONFIG_X86_64),y) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index c2ac1b4515a0..eb875cdc7367 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1418,8 +1418,16 @@ static int __init force_acpi_ht(const struct dmi_system_id *d) */ static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d) { - pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n", d->ident); - acpi_skip_timer_override = 1; + /* + * The ati_ixp4x0_rev() early PCI quirk should have set + * the acpi_skip_timer_override flag already: + */ + if (!acpi_skip_timer_override) { + WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n"); + pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n", + d->ident); + acpi_skip_timer_override = 1; + } return 0; } diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 148fcfe22f17..4cd8083c58be 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -723,9 +723,7 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h) init_iommu_from_acpi(iommu, h); init_iommu_devices(iommu); - pci_enable_device(iommu->dev); - - return 0; + return pci_enable_device(iommu->dev); } /* diff --git a/arch/x86/kernel/doublefault_32.c b/arch/x86/kernel/doublefault_32.c index a47798b59f07..395acb12b0d1 100644 --- a/arch/x86/kernel/doublefault_32.c +++ b/arch/x86/kernel/doublefault_32.c @@ -66,6 +66,6 @@ struct tss_struct doublefault_tss __cacheline_aligned = { .ds = __USER_DS, .fs = __KERNEL_PERCPU, - .__cr3 = __pa(swapper_pg_dir) + .__cr3 = __phys_addr_const((unsigned long)swapper_pg_dir) } }; diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 24bb5faf5efa..733c4f8d42ea 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -95,6 +95,52 @@ static void __init nvidia_bugs(int num, int slot, int func) } +static u32 ati_ixp4x0_rev(int num, int slot, int func) +{ + u32 d; + u8 b; + + b = read_pci_config_byte(num, slot, func, 0xac); + b &= ~(1<<5); + write_pci_config_byte(num, slot, func, 0xac, b); + + d = read_pci_config(num, slot, func, 0x70); + d |= 1<<8; + write_pci_config(num, slot, func, 0x70, d); + + d = read_pci_config(num, slot, func, 0x8); + d &= 0xff; + return d; +} + +static void __init ati_bugs(int num, int slot, int func) +{ +#if defined(CONFIG_ACPI) && defined (CONFIG_X86_IO_APIC) + u32 d; + u8 b; + + if (acpi_use_timer_override) + return; + + d = ati_ixp4x0_rev(num, slot, func); + if (d < 0x82) + acpi_skip_timer_override = 1; + else { + /* check for IRQ0 interrupt swap */ + outb(0x72, 0xcd6); b = inb(0xcd7); + if (!(b & 0x2)) + acpi_skip_timer_override = 1; + } + + if (acpi_skip_timer_override) { + printk(KERN_INFO "SB4X0 revision 0x%x\n", d); + printk(KERN_INFO "Ignoring ACPI timer override.\n"); + printk(KERN_INFO "If you got timer trouble " + "try acpi_use_timer_override\n"); + } +#endif +} + #ifdef CONFIG_DMAR static void __init intel_g33_dmar(int num, int slot, int func) { @@ -128,6 +174,8 @@ static struct chipset early_qrk[] __initdata = { PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB, PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config }, + { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS, + PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs }, #ifdef CONFIG_DMAR { PCI_VENDOR_ID_INTEL, 0x29c0, PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, intel_g33_dmar }, diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c index ff9e7350da54..34ad997d3834 100644 --- a/arch/x86/kernel/early_printk.c +++ b/arch/x86/kernel/early_printk.c @@ -3,11 +3,19 @@ #include <linux/init.h> #include <linux/string.h> #include <linux/screen_info.h> +#include <linux/usb/ch9.h> +#include <linux/pci_regs.h> +#include <linux/pci_ids.h> +#include <linux/errno.h> #include <asm/io.h> #include <asm/processor.h> #include <asm/fcntl.h> #include <asm/setup.h> #include <xen/hvc-console.h> +#include <asm/pci-direct.h> +#include <asm/pgtable.h> +#include <asm/fixmap.h> +#include <linux/usb/ehci_def.h> /* Simple VGA output */ #define VGABASE (__ISA_IO_base + 0xb8000) @@ -78,6 +86,7 @@ static int early_serial_base = 0x3f8; /* ttyS0 */ static int early_serial_putc(unsigned char ch) { unsigned timeout = 0xffff; + while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout) cpu_relax(); outb(ch, early_serial_base + TXR); @@ -111,7 +120,7 @@ static __init void early_serial_init(char *s) if (!strncmp(s, "0x", 2)) { early_serial_base = simple_strtoul(s, &e, 16); } else { - static int bases[] = { 0x3f8, 0x2f8 }; + static const int __initconst bases[] = { 0x3f8, 0x2f8 }; if (!strncmp(s, "ttyS", 4)) s += 4; @@ -151,6 +160,721 @@ static struct console early_serial_console = { .index = -1, }; +#ifdef CONFIG_EARLY_PRINTK_DBGP + +static struct ehci_caps __iomem *ehci_caps; +static struct ehci_regs __iomem *ehci_regs; +static struct ehci_dbg_port __iomem *ehci_debug; +static unsigned int dbgp_endpoint_out; + +struct ehci_dev { + u32 bus; + u32 slot; + u32 func; +}; + +static struct ehci_dev ehci_dev; + +#define USB_DEBUG_DEVNUM 127 + +#define DBGP_DATA_TOGGLE 0x8800 + +static inline u32 dbgp_pid_update(u32 x, u32 tok) +{ + return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff); +} + +static inline u32 dbgp_len_update(u32 x, u32 len) +{ + return (x & ~0x0f) | (len & 0x0f); +} + +/* + * USB Packet IDs (PIDs) + */ + +/* token */ +#define USB_PID_OUT 0xe1 +#define USB_PID_IN 0x69 +#define USB_PID_SOF 0xa5 +#define USB_PID_SETUP 0x2d +/* handshake */ +#define USB_PID_ACK 0xd2 +#define USB_PID_NAK 0x5a +#define USB_PID_STALL 0x1e +#define USB_PID_NYET 0x96 +/* data */ +#define USB_PID_DATA0 0xc3 +#define USB_PID_DATA1 0x4b +#define USB_PID_DATA2 0x87 +#define USB_PID_MDATA 0x0f +/* Special */ +#define USB_PID_PREAMBLE 0x3c +#define USB_PID_ERR 0x3c +#define USB_PID_SPLIT 0x78 +#define USB_PID_PING 0xb4 +#define USB_PID_UNDEF_0 0xf0 + +#define USB_PID_DATA_TOGGLE 0x88 +#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE) + +#define PCI_CAP_ID_EHCI_DEBUG 0xa + +#define HUB_ROOT_RESET_TIME 50 /* times are in msec */ +#define HUB_SHORT_RESET_TIME 10 +#define HUB_LONG_RESET_TIME 200 +#define HUB_RESET_TIMEOUT 500 + +#define DBGP_MAX_PACKET 8 + +static int dbgp_wait_until_complete(void) +{ + u32 ctrl; + int loop = 0x100000; + + do { + ctrl = readl(&ehci_debug->control); + /* Stop when the transaction is finished */ + if (ctrl & DBGP_DONE) + break; + } while (--loop > 0); + + if (!loop) + return -1; + + /* + * Now that we have observed the completed transaction, + * clear the done bit. + */ + writel(ctrl | DBGP_DONE, &ehci_debug->control); + return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl); +} + +static void dbgp_mdelay(int ms) +{ + int i; + + while (ms--) { + for (i = 0; i < 1000; i++) + outb(0x1, 0x80); + } +} + +static void dbgp_breath(void) +{ + /* Sleep to give the debug port a chance to breathe */ +} + +static int dbgp_wait_until_done(unsigned ctrl) +{ + u32 pids, lpid; + int ret; + int loop = 3; + +retry: + writel(ctrl | DBGP_GO, &ehci_debug->control); + ret = dbgp_wait_until_complete(); + pids = readl(&ehci_debug->pids); + lpid = DBGP_PID_GET(pids); + + if (ret < 0) + return ret; + + /* + * If the port is getting full or it has dropped data + * start pacing ourselves, not necessary but it's friendly. + */ + if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET)) + dbgp_breath(); + + /* If I get a NACK reissue the transmission */ + if (lpid == USB_PID_NAK) { + if (--loop > 0) + goto retry; + } + + return ret; +} + +static void dbgp_set_data(const void *buf, int size) +{ + const unsigned char *bytes = buf; + u32 lo, hi; + int i; + + lo = hi = 0; + for (i = 0; i < 4 && i < size; i++) + lo |= bytes[i] << (8*i); + for (; i < 8 && i < size; i++) + hi |= bytes[i] << (8*(i - 4)); + writel(lo, &ehci_debug->data03); + writel(hi, &ehci_debug->data47); +} + +static void dbgp_get_data(void *buf, int size) +{ + unsigned char *bytes = buf; + u32 lo, hi; + int i; + + lo = readl(&ehci_debug->data03); + hi = readl(&ehci_debug->data47); + for (i = 0; i < 4 && i < size; i++) + bytes[i] = (lo >> (8*i)) & 0xff; + for (; i < 8 && i < size; i++) + bytes[i] = (hi >> (8*(i - 4))) & 0xff; +} + +static int dbgp_bulk_write(unsigned devnum, unsigned endpoint, + const char *bytes, int size) +{ + u32 pids, addr, ctrl; + int ret; + + if (size > DBGP_MAX_PACKET) + return -1; + + addr = DBGP_EPADDR(devnum, endpoint); + + pids = readl(&ehci_debug->pids); + pids = dbgp_pid_update(pids, USB_PID_OUT); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, size); + ctrl |= DBGP_OUT; + ctrl |= DBGP_GO; + + dbgp_set_data(bytes, size); + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + return ret; +} + +static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data, + int size) +{ + u32 pids, addr, ctrl; + int ret; + + if (size > DBGP_MAX_PACKET) + return -1; + + addr = DBGP_EPADDR(devnum, endpoint); + + pids = readl(&ehci_debug->pids); + pids = dbgp_pid_update(pids, USB_PID_IN); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, size); + ctrl &= ~DBGP_OUT; + ctrl |= DBGP_GO; + + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + if (size > ret) + size = ret; + dbgp_get_data(data, size); + return ret; +} + +static int dbgp_control_msg(unsigned devnum, int requesttype, int request, + int value, int index, void *data, int size) +{ + u32 pids, addr, ctrl; + struct usb_ctrlrequest req; + int read; + int ret; + + read = (requesttype & USB_DIR_IN) != 0; + if (size > (read ? DBGP_MAX_PACKET:0)) + return -1; + + /* Compute the control message */ + req.bRequestType = requesttype; + req.bRequest = request; + req.wValue = cpu_to_le16(value); + req.wIndex = cpu_to_le16(index); + req.wLength = cpu_to_le16(size); + + pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP); + addr = DBGP_EPADDR(devnum, 0); + + ctrl = readl(&ehci_debug->control); + ctrl = dbgp_len_update(ctrl, sizeof(req)); + ctrl |= DBGP_OUT; + ctrl |= DBGP_GO; + + /* Send the setup message */ + dbgp_set_data(&req, sizeof(req)); + writel(addr, &ehci_debug->address); + writel(pids, &ehci_debug->pids); + ret = dbgp_wait_until_done(ctrl); + if (ret < 0) + return ret; + + /* Read the result */ + return dbgp_bulk_read(devnum, 0, data, size); +} + + +/* Find a PCI capability */ +static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap) +{ + u8 pos; + int bytes; + + if (!(read_pci_config_16(num, slot, func, PCI_STATUS) & + PCI_STATUS_CAP_LIST)) + return 0; + + pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST); + for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { + u8 id; + + pos &= ~3; + id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID); + if (id == 0xff) + break; + if (id == cap) + return pos; + + pos = read_pci_config_byte(num, slot, func, + pos+PCI_CAP_LIST_NEXT); + } + return 0; +} + +static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func) +{ + u32 class; + + class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); + if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI) + return 0; + + return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG); +} + +static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc) +{ + u32 bus, slot, func; + + for (bus = 0; bus < 256; bus++) { + for (slot = 0; slot < 32; slot++) { + for (func = 0; func < 8; func++) { + unsigned cap; + + cap = __find_dbgp(bus, slot, func); + + if (!cap) + continue; + if (ehci_num-- != 0) + continue; + *rbus = bus; + *rslot = slot; + *rfunc = func; + return cap; + } + } + } + return 0; +} + +static int ehci_reset_port(int port) +{ + u32 portsc; + u32 delay_time, delay; + int loop; + + /* Reset the usb debug port */ + portsc = readl(&ehci_regs->port_status[port - 1]); + portsc &= ~PORT_PE; + portsc |= PORT_RESET; + writel(portsc, &ehci_regs->port_status[port - 1]); + + delay = HUB_ROOT_RESET_TIME; + for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT; + delay_time += delay) { + dbgp_mdelay(delay); + + portsc = readl(&ehci_regs->port_status[port - 1]); + if (portsc & PORT_RESET) { + /* force reset to complete */ + loop = 2; + writel(portsc & ~(PORT_RWC_BITS | PORT_RESET), + &ehci_regs->port_status[port - 1]); + do { + portsc = readl(&ehci_regs->port_status[port-1]); + } while ((portsc & PORT_RESET) && (--loop > 0)); + } + + /* Device went away? */ + if (!(portsc & PORT_CONNECT)) + return -ENOTCONN; + + /* bomb out completely if something weird happend */ + if ((portsc & PORT_CSC)) + return -EINVAL; + + /* If we've finished resetting, then break out of the loop */ + if (!(portsc & PORT_RESET) && (portsc & PORT_PE)) + return 0; + } + return -EBUSY; +} + +static int ehci_wait_for_port(int port) +{ + u32 status; + int ret, reps; + + for (reps = 0; reps < 3; reps++) { + dbgp_mdelay(100); + status = readl(&ehci_regs->status); + if (status & STS_PCD) { + ret = ehci_reset_port(port); + if (ret == 0) + return 0; + } + } + return -ENOTCONN; +} + +#ifdef DBGP_DEBUG +# define dbgp_printk early_printk +#else +static inline void dbgp_printk(const char *fmt, ...) { } +#endif + +typedef void (*set_debug_port_t)(int port); + +static void default_set_debug_port(int port) +{ +} + +static set_debug_port_t set_debug_port = default_set_debug_port; + +static void nvidia_set_debug_port(int port) +{ + u32 dword; + dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, + 0x74); + dword &= ~(0x0f<<12); + dword |= ((port & 0x0f)<<12); + write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74, + dword); + dbgp_printk("set debug port to %d\n", port); +} + +static void __init detect_set_debug_port(void) +{ + u32 vendorid; + + vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, + 0x00); + + if ((vendorid & 0xffff) == 0x10de) { + dbgp_printk("using nvidia set_debug_port\n"); + set_debug_port = nvidia_set_debug_port; + } +} + +static int __init ehci_setup(void) +{ + struct usb_debug_descriptor dbgp_desc; + u32 cmd, ctrl, status, portsc, hcs_params; + u32 debug_port, new_debug_port = 0, n_ports; + u32 devnum; + int ret, i; + int loop; + int port_map_tried; + int playtimes = 3; + +try_next_time: + port_map_tried = 0; + +try_next_port: + + hcs_params = readl(&ehci_caps->hcs_params); + debug_port = HCS_DEBUG_PORT(hcs_params); + n_ports = HCS_N_PORTS(hcs_params); + + dbgp_printk("debug_port: %d\n", debug_port); + dbgp_printk("n_ports: %d\n", n_ports); + + for (i = 1; i <= n_ports; i++) { + portsc = readl(&ehci_regs->port_status[i-1]); + dbgp_printk("portstatus%d: %08x\n", i, portsc); + } + + if (port_map_tried && (new_debug_port != debug_port)) { + if (--playtimes) { + set_debug_port(new_debug_port); + goto try_next_time; + } + return -1; + } + + loop = 10; + /* Reset the EHCI controller */ + cmd = readl(&ehci_regs->command); + cmd |= CMD_RESET; + writel(cmd, &ehci_regs->command); + do { + cmd = readl(&ehci_regs->command); + } while ((cmd & CMD_RESET) && (--loop > 0)); + + if (!loop) { + dbgp_printk("can not reset ehci\n"); + return -1; + } + dbgp_printk("ehci reset done\n"); + + /* Claim ownership, but do not enable yet */ + ctrl = readl(&ehci_debug->control); + ctrl |= DBGP_OWNER; + ctrl &= ~(DBGP_ENABLED | DBGP_INUSE); + writel(ctrl, &ehci_debug->control); + + /* Start the ehci running */ + cmd = readl(&ehci_regs->command); + cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET); + cmd |= CMD_RUN; + writel(cmd, &ehci_regs->command); + + /* Ensure everything is routed to the EHCI */ + writel(FLAG_CF, &ehci_regs->configured_flag); + + /* Wait until the controller is no longer halted */ + loop = 10; + do { + status = readl(&ehci_regs->status); + } while ((status & STS_HALT) && (--loop > 0)); + + if (!loop) { + dbgp_printk("ehci can be started\n"); + return -1; + } + dbgp_printk("ehci started\n"); + + /* Wait for a device to show up in the debug port */ + ret = ehci_wait_for_port(debug_port); + if (ret < 0) { + dbgp_printk("No device found in debug port\n"); + goto next_debug_port; + } + dbgp_printk("ehci wait for port done\n"); + + /* Enable the debug port */ + ctrl = readl(&ehci_debug->control); + ctrl |= DBGP_CLAIM; + writel(ctrl, &ehci_debug->control); + ctrl = readl(&ehci_debug->control); + if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) { + dbgp_printk("No device in debug port\n"); + writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control); + goto err; + } + dbgp_printk("debug ported enabled\n"); + + /* Completely transfer the debug device to the debug controller */ + portsc = readl(&ehci_regs->port_status[debug_port - 1]); + portsc &= ~PORT_PE; + writel(portsc, &ehci_regs->port_status[debug_port - 1]); + + dbgp_mdelay(100); + + /* Find the debug device and make it device number 127 */ + for (devnum = 0; devnum <= 127; devnum++) { + ret = dbgp_control_msg(devnum, + USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0, + &dbgp_desc, sizeof(dbgp_desc)); + if (ret > 0) + break; + } + if (devnum > 127) { + dbgp_printk("Could not find attached debug device\n"); + goto err; + } + if (ret < 0) { + dbgp_printk("Attached device is not a debug device\n"); + goto err; + } + dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint; + + /* Move the device to 127 if it isn't already there */ + if (devnum != USB_DEBUG_DEVNUM) { + ret = dbgp_control_msg(devnum, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0); + if (ret < 0) { + dbgp_printk("Could not move attached device to %d\n", + USB_DEBUG_DEVNUM); + goto err; + } + devnum = USB_DEBUG_DEVNUM; + dbgp_printk("debug device renamed to 127\n"); + } + + /* Enable the debug interface */ + ret = dbgp_control_msg(USB_DEBUG_DEVNUM, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0); + if (ret < 0) { + dbgp_printk(" Could not enable the debug device\n"); + goto err; + } + dbgp_printk("debug interface enabled\n"); + + /* Perform a small write to get the even/odd data state in sync + */ + ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1); + if (ret < 0) { + dbgp_printk("dbgp_bulk_write failed: %d\n", ret); + goto err; + } + dbgp_printk("small write doned\n"); + + return 0; +err: + /* Things didn't work so remove my claim */ + ctrl = readl(&ehci_debug->control); + ctrl &= ~(DBGP_CLAIM | DBGP_OUT); + writel(ctrl, &ehci_debug->control); + return -1; + +next_debug_port: + port_map_tried |= (1<<(debug_port - 1)); + new_debug_port = ((debug_port-1+1)%n_ports) + 1; + if (port_map_tried != ((1<<n_ports) - 1)) { + set_debug_port(new_debug_port); + goto try_next_port; + } + if (--playtimes) { + set_debug_port(new_debug_port); + goto try_next_time; + } + + return -1; +} + +static int __init early_dbgp_init(char *s) +{ + u32 debug_port, bar, offset; + u32 bus, slot, func, cap; + void __iomem *ehci_bar; + u32 dbgp_num; + u32 bar_val; + char *e; + int ret; + u8 byte; + + if (!early_pci_allowed()) + return -1; + + dbgp_num = 0; + if (*s) + dbgp_num = simple_strtoul(s, &e, 10); + dbgp_printk("dbgp_num: %d\n", dbgp_num); + + cap = find_dbgp(dbgp_num, &bus, &slot, &func); + if (!cap) + return -1; + + dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot, + func); + + debug_port = read_pci_config(bus, slot, func, cap); + bar = (debug_port >> 29) & 0x7; + bar = (bar * 4) + 0xc; + offset = (debug_port >> 16) & 0xfff; + dbgp_printk("bar: %02x offset: %03x\n", bar, offset); + if (bar != PCI_BASE_ADDRESS_0) { + dbgp_printk("only debug ports on bar 1 handled.\n"); + + return -1; + } + + bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0); + dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset); + if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) { + dbgp_printk("only simple 32bit mmio bars supported\n"); + + return -1; + } + + /* double check if the mem space is enabled */ + byte = read_pci_config_byte(bus, slot, func, 0x04); + if (!(byte & 0x2)) { + byte |= 0x02; + write_pci_config_byte(bus, slot, func, 0x04, byte); + dbgp_printk("mmio for ehci enabled\n"); + } + + /* + * FIXME I don't have the bar size so just guess PAGE_SIZE is more + * than enough. 1K is the biggest I have seen. + */ + set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK); + ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE); + ehci_bar += bar_val & ~PAGE_MASK; + dbgp_printk("ehci_bar: %p\n", ehci_bar); + + ehci_caps = ehci_bar; + ehci_regs = ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase)); + ehci_debug = ehci_bar + offset; + ehci_dev.bus = bus; + ehci_dev.slot = slot; + ehci_dev.func = func; + + detect_set_debug_port(); + + ret = ehci_setup(); + if (ret < 0) { + dbgp_printk("ehci_setup failed\n"); + ehci_debug = NULL; + + return -1; + } + + return 0; +} + +static void early_dbgp_write(struct console *con, const char *str, u32 n) +{ + int chunk, ret; + + if (!ehci_debug) + return; + while (n > 0) { + chunk = n; + if (chunk > DBGP_MAX_PACKET) + chunk = DBGP_MAX_PACKET; + ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, + dbgp_endpoint_out, str, chunk); + str += chunk; + n -= chunk; + } +} + +static struct console early_dbgp_console = { + .name = "earlydbg", + .write = early_dbgp_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; +#endif + /* Console interface to a host file on AMD's SimNow! */ static int simnow_fd; @@ -165,6 +889,7 @@ enum { static noinline long simnow(long cmd, long a, long b, long c) { long ret; + asm volatile("cpuid" : "=a" (ret) : "b" (a), "c" (b), "d" (c), "0" (MAGIC1), "D" (cmd + MAGIC2)); @@ -174,6 +899,7 @@ static noinline long simnow(long cmd, long a, long b, long c) static void __init simnow_init(char *str) { char *fn = "klog"; + if (*str == '=') fn = ++str; /* error ignored */ @@ -194,7 +920,7 @@ static struct console simnow_console = { /* Direct interface for emergencies */ static struct console *early_console = &early_vga_console; -static int early_console_initialized; +static int __initdata early_console_initialized; asmlinkage void early_printk(const char *fmt, ...) { @@ -208,10 +934,11 @@ asmlinkage void early_printk(const char *fmt, ...) va_end(ap); } -static int __initdata keep_early; static int __init setup_early_printk(char *buf) { + int keep_early; + if (!buf) return 0; @@ -219,8 +946,7 @@ static int __init setup_early_printk(char *buf) return 0; early_console_initialized = 1; - if (strstr(buf, "keep")) - keep_early = 1; + keep_early = (strstr(buf, "keep") != NULL); if (!strncmp(buf, "serial", 6)) { early_serial_init(buf + 6); @@ -238,6 +964,17 @@ static int __init setup_early_printk(char *buf) simnow_init(buf + 6); early_console = &simnow_console; keep_early = 1; +#ifdef CONFIG_EARLY_PRINTK_DBGP + } else if (!strncmp(buf, "dbgp", 4)) { + if (early_dbgp_init(buf+4) < 0) + return 0; + early_console = &early_dbgp_console; + /* + * usb subsys will reset ehci controller, so don't keep + * that early console + */ + keep_early = 0; +#endif #ifdef CONFIG_HVC_XEN } else if (!strncmp(buf, "xen", 3)) { early_console = &xenboot_console; @@ -251,4 +988,5 @@ static int __init setup_early_printk(char *buf) register_console(early_console); return 0; } + early_param("earlyprintk", setup_early_printk); diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index 45723f1fe198..1f20608d4ca8 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -468,9 +468,23 @@ static int save_i387_fxsave(struct _fpstate_ia32 __user *buf) static int save_i387_xsave(void __user *buf) { + struct task_struct *tsk = current; struct _fpstate_ia32 __user *fx = buf; int err = 0; + /* + * For legacy compatible, we always set FP/SSE bits in the bit + * vector while saving the state to the user context. + * This will enable us capturing any changes(during sigreturn) to + * the FP/SSE bits by the legacy applications which don't touch + * xstate_bv in the xsave header. + * + * xsave aware applications can change the xstate_bv in the xsave + * header as well as change any contents in the memory layout. + * xrestore as part of sigreturn will capture all the changes. + */ + tsk->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE; + if (save_i387_fxsave(fx) < 0) return -1; diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index a1bec2969c6a..02063ae042f7 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -1281,8 +1281,8 @@ __apicdebuginit(void) print_local_APIC(void *dummy) printk(KERN_DEBUG "... APIC ESR: %08x\n", v); icr = apic_icr_read(); - printk(KERN_DEBUG "... APIC ICR: %08x\n", icr); - printk(KERN_DEBUG "... APIC ICR2: %08x\n", icr >> 32); + printk(KERN_DEBUG "... APIC ICR: %08x\n", (u32)icr); + printk(KERN_DEBUG "... APIC ICR2: %08x\n", (u32)(icr >> 32)); v = apic_read(APIC_LVTT); printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c deleted file mode 100644 index 652fa5c38ebe..000000000000 --- a/arch/x86/kernel/microcode.c +++ /dev/null @@ -1,853 +0,0 @@ -/* - * Intel CPU Microcode Update Driver for Linux - * - * Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk> - * 2006 Shaohua Li <shaohua.li@intel.com> - * - * This driver allows to upgrade microcode on Intel processors - * belonging to IA-32 family - PentiumPro, Pentium II, - * Pentium III, Xeon, Pentium 4, etc. - * - * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture - * Software Developer's Manual - * Order Number 253668 or free download from: - * - * http://developer.intel.com/design/pentium4/manuals/253668.htm - * - * For more information, go to http://www.urbanmyth.org/microcode - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com> - * Initial release. - * 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com> - * Added read() support + cleanups. - * 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com> - * Added 'device trimming' support. open(O_WRONLY) zeroes - * and frees the saved copy of applied microcode. - * 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com> - * Made to use devfs (/dev/cpu/microcode) + cleanups. - * 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com> - * Added misc device support (now uses both devfs and misc). - * Added MICROCODE_IOCFREE ioctl to clear memory. - * 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com> - * Messages for error cases (non Intel & no suitable microcode). - * 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com> - * Removed ->release(). Removed exclusive open and status bitmap. - * Added microcode_rwsem to serialize read()/write()/ioctl(). - * Removed global kernel lock usage. - * 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com> - * Write 0 to 0x8B msr and then cpuid before reading revision, - * so that it works even if there were no update done by the - * BIOS. Otherwise, reading from 0x8B gives junk (which happened - * to be 0 on my machine which is why it worked even when I - * disabled update by the BIOS) - * Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix. - * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and - * Tigran Aivazian <tigran@veritas.com> - * Intel Pentium 4 processor support and bugfixes. - * 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com> - * Bugfix for HT (Hyper-Threading) enabled processors - * whereby processor resources are shared by all logical processors - * in a single CPU package. - * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and - * Tigran Aivazian <tigran@veritas.com>, - * Serialize updates as required on HT processors due to speculative - * nature of implementation. - * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com> - * Fix the panic when writing zero-length microcode chunk. - * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, - * Jun Nakajima <jun.nakajima@intel.com> - * Support for the microcode updates in the new format. - * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com> - * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl - * because we no longer hold a copy of applied microcode - * in kernel memory. - * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com> - * Fix sigmatch() macro to handle old CPUs with pf == 0. - * Thanks to Stuart Swales for pointing out this bug. - */ - -//#define DEBUG /* pr_debug */ -#include <linux/capability.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/smp_lock.h> -#include <linux/cpumask.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> -#include <linux/miscdevice.h> -#include <linux/spinlock.h> -#include <linux/mm.h> -#include <linux/fs.h> -#include <linux/mutex.h> -#include <linux/cpu.h> -#include <linux/firmware.h> -#include <linux/platform_device.h> - -#include <asm/msr.h> -#include <asm/uaccess.h> -#include <asm/processor.h> - -MODULE_DESCRIPTION("Intel CPU (IA-32) Microcode Update Driver"); -MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>"); -MODULE_LICENSE("GPL"); - -#define MICROCODE_VERSION "1.14a" - -#define DEFAULT_UCODE_DATASIZE (2000) /* 2000 bytes */ -#define MC_HEADER_SIZE (sizeof (microcode_header_t)) /* 48 bytes */ -#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) /* 2048 bytes */ -#define EXT_HEADER_SIZE (sizeof (struct extended_sigtable)) /* 20 bytes */ -#define EXT_SIGNATURE_SIZE (sizeof (struct extended_signature)) /* 12 bytes */ -#define DWSIZE (sizeof (u32)) -#define get_totalsize(mc) \ - (((microcode_t *)mc)->hdr.totalsize ? \ - ((microcode_t *)mc)->hdr.totalsize : DEFAULT_UCODE_TOTALSIZE) -#define get_datasize(mc) \ - (((microcode_t *)mc)->hdr.datasize ? \ - ((microcode_t *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE) - -#define sigmatch(s1, s2, p1, p2) \ - (((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0)))) - -#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE) - -/* serialize access to the physical write to MSR 0x79 */ -static DEFINE_SPINLOCK(microcode_update_lock); - -/* no concurrent ->write()s are allowed on /dev/cpu/microcode */ -static DEFINE_MUTEX(microcode_mutex); - -static struct ucode_cpu_info { - int valid; - unsigned int sig; - unsigned int pf; - unsigned int rev; - microcode_t *mc; -} ucode_cpu_info[NR_CPUS]; - -static void collect_cpu_info(int cpu_num) -{ - struct cpuinfo_x86 *c = &cpu_data(cpu_num); - struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - unsigned int val[2]; - - /* We should bind the task to the CPU */ - BUG_ON(raw_smp_processor_id() != cpu_num); - uci->pf = uci->rev = 0; - uci->mc = NULL; - uci->valid = 1; - - if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || - cpu_has(c, X86_FEATURE_IA64)) { - printk(KERN_ERR "microcode: CPU%d not a capable Intel " - "processor\n", cpu_num); - uci->valid = 0; - return; - } - - uci->sig = cpuid_eax(0x00000001); - - if ((c->x86_model >= 5) || (c->x86 > 6)) { - /* get processor flags from MSR 0x17 */ - rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); - uci->pf = 1 << ((val[1] >> 18) & 7); - } - - wrmsr(MSR_IA32_UCODE_REV, 0, 0); - /* see notes above for revision 1.07. Apparent chip bug */ - sync_core(); - /* get the current revision from MSR 0x8B */ - rdmsr(MSR_IA32_UCODE_REV, val[0], uci->rev); - pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n", - uci->sig, uci->pf, uci->rev); -} - -static inline int microcode_update_match(int cpu_num, - microcode_header_t *mc_header, int sig, int pf) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - - if (!sigmatch(sig, uci->sig, pf, uci->pf) - || mc_header->rev <= uci->rev) - return 0; - return 1; -} - -static int microcode_sanity_check(void *mc) -{ - microcode_header_t *mc_header = mc; - struct extended_sigtable *ext_header = NULL; - struct extended_signature *ext_sig; - unsigned long total_size, data_size, ext_table_size; - int sum, orig_sum, ext_sigcount = 0, i; - - total_size = get_totalsize(mc_header); - data_size = get_datasize(mc_header); - if (data_size + MC_HEADER_SIZE > total_size) { - printk(KERN_ERR "microcode: error! " - "Bad data size in microcode data file\n"); - return -EINVAL; - } - - if (mc_header->ldrver != 1 || mc_header->hdrver != 1) { - printk(KERN_ERR "microcode: error! " - "Unknown microcode update format\n"); - return -EINVAL; - } - ext_table_size = total_size - (MC_HEADER_SIZE + data_size); - if (ext_table_size) { - if ((ext_table_size < EXT_HEADER_SIZE) - || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) { - printk(KERN_ERR "microcode: error! " - "Small exttable size in microcode data file\n"); - return -EINVAL; - } - ext_header = mc + MC_HEADER_SIZE + data_size; - if (ext_table_size != exttable_size(ext_header)) { - printk(KERN_ERR "microcode: error! " - "Bad exttable size in microcode data file\n"); - return -EFAULT; - } - ext_sigcount = ext_header->count; - } - - /* check extended table checksum */ - if (ext_table_size) { - int ext_table_sum = 0; - int *ext_tablep = (int *)ext_header; - - i = ext_table_size / DWSIZE; - while (i--) - ext_table_sum += ext_tablep[i]; - if (ext_table_sum) { - printk(KERN_WARNING "microcode: aborting, " - "bad extended signature table checksum\n"); - return -EINVAL; - } - } - - /* calculate the checksum */ - orig_sum = 0; - i = (MC_HEADER_SIZE + data_size) / DWSIZE; - while (i--) - orig_sum += ((int *)mc)[i]; - if (orig_sum) { - printk(KERN_ERR "microcode: aborting, bad checksum\n"); - return -EINVAL; - } - if (!ext_table_size) - return 0; - /* check extended signature checksum */ - for (i = 0; i < ext_sigcount; i++) { - ext_sig = (void *)ext_header + EXT_HEADER_SIZE + - EXT_SIGNATURE_SIZE * i; - sum = orig_sum - - (mc_header->sig + mc_header->pf + mc_header->cksum) - + (ext_sig->sig + ext_sig->pf + ext_sig->cksum); - if (sum) { - printk(KERN_ERR "microcode: aborting, bad checksum\n"); - return -EINVAL; - } - } - return 0; -} - -/* - * return 0 - no update found - * return 1 - found update - * return < 0 - error - */ -static int get_maching_microcode(void *mc, int cpu) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - microcode_header_t *mc_header = mc; - struct extended_sigtable *ext_header; - unsigned long total_size = get_totalsize(mc_header); - int ext_sigcount, i; - struct extended_signature *ext_sig; - void *new_mc; - - if (microcode_update_match(cpu, mc_header, - mc_header->sig, mc_header->pf)) - goto find; - - if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE) - return 0; - - ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE; - ext_sigcount = ext_header->count; - ext_sig = (void *)ext_header + EXT_HEADER_SIZE; - for (i = 0; i < ext_sigcount; i++) { - if (microcode_update_match(cpu, mc_header, - ext_sig->sig, ext_sig->pf)) - goto find; - ext_sig++; - } - return 0; -find: - pr_debug("microcode: CPU%d found a matching microcode update with" - " version 0x%x (current=0x%x)\n", cpu, mc_header->rev,uci->rev); - new_mc = vmalloc(total_size); - if (!new_mc) { - printk(KERN_ERR "microcode: error! Can not allocate memory\n"); - return -ENOMEM; - } - - /* free previous update file */ - vfree(uci->mc); - - memcpy(new_mc, mc, total_size); - uci->mc = new_mc; - return 1; -} - -static void apply_microcode(int cpu) -{ - unsigned long flags; - unsigned int val[2]; - int cpu_num = raw_smp_processor_id(); - struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; - - /* We should bind the task to the CPU */ - BUG_ON(cpu_num != cpu); - - if (uci->mc == NULL) - return; - - /* serialize access to the physical write to MSR 0x79 */ - spin_lock_irqsave(µcode_update_lock, flags); - - /* write microcode via MSR 0x79 */ - wrmsr(MSR_IA32_UCODE_WRITE, - (unsigned long) uci->mc->bits, - (unsigned long) uci->mc->bits >> 16 >> 16); - wrmsr(MSR_IA32_UCODE_REV, 0, 0); - - /* see notes above for revision 1.07. Apparent chip bug */ - sync_core(); - - /* get the current revision from MSR 0x8B */ - rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); - - spin_unlock_irqrestore(µcode_update_lock, flags); - if (val[1] != uci->mc->hdr.rev) { - printk(KERN_ERR "microcode: CPU%d update from revision " - "0x%x to 0x%x failed\n", cpu_num, uci->rev, val[1]); - return; - } - printk(KERN_INFO "microcode: CPU%d updated from revision " - "0x%x to 0x%x, date = %08x \n", - cpu_num, uci->rev, val[1], uci->mc->hdr.date); - uci->rev = val[1]; -} - -#ifdef CONFIG_MICROCODE_OLD_INTERFACE -static void __user *user_buffer; /* user area microcode data buffer */ -static unsigned int user_buffer_size; /* it's size */ - -static long get_next_ucode(void **mc, long offset) -{ - microcode_header_t mc_header; - unsigned long total_size; - - /* No more data */ - if (offset >= user_buffer_size) - return 0; - if (copy_from_user(&mc_header, user_buffer + offset, MC_HEADER_SIZE)) { - printk(KERN_ERR "microcode: error! Can not read user data\n"); - return -EFAULT; - } - total_size = get_totalsize(&mc_header); - if (offset + total_size > user_buffer_size) { - printk(KERN_ERR "microcode: error! Bad total size in microcode " - "data file\n"); - return -EINVAL; - } - *mc = vmalloc(total_size); - if (!*mc) - return -ENOMEM; - if (copy_from_user(*mc, user_buffer + offset, total_size)) { - printk(KERN_ERR "microcode: error! Can not read user data\n"); - vfree(*mc); - return -EFAULT; - } - return offset + total_size; -} - -static int do_microcode_update (void) -{ - long cursor = 0; - int error = 0; - void *new_mc = NULL; - int cpu; - cpumask_t old; - - old = current->cpus_allowed; - - while ((cursor = get_next_ucode(&new_mc, cursor)) > 0) { - error = microcode_sanity_check(new_mc); - if (error) - goto out; - /* - * It's possible the data file has multiple matching ucode, - * lets keep searching till the latest version - */ - for_each_online_cpu(cpu) { - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - - if (!uci->valid) - continue; - set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); - error = get_maching_microcode(new_mc, cpu); - if (error < 0) - goto out; - if (error == 1) - apply_microcode(cpu); - } - vfree(new_mc); - } -out: - if (cursor > 0) - vfree(new_mc); - if (cursor < 0) - error = cursor; - set_cpus_allowed_ptr(current, &old); - return error; -} - -static int microcode_open (struct inode *unused1, struct file *unused2) -{ - cycle_kernel_lock(); - return capable(CAP_SYS_RAWIO) ? 0 : -EPERM; -} - -static ssize_t microcode_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos) -{ - ssize_t ret; - - if ((len >> PAGE_SHIFT) > num_physpages) { - printk(KERN_ERR "microcode: too much data (max %ld pages)\n", num_physpages); - return -EINVAL; - } - - get_online_cpus(); - mutex_lock(µcode_mutex); - - user_buffer = (void __user *) buf; - user_buffer_size = (int) len; - - ret = do_microcode_update(); - if (!ret) - ret = (ssize_t)len; - - mutex_unlock(µcode_mutex); - put_online_cpus(); - - return ret; -} - -static const struct file_operations microcode_fops = { - .owner = THIS_MODULE, - .write = microcode_write, - .open = microcode_open, -}; - -static struct miscdevice microcode_dev = { - .minor = MICROCODE_MINOR, - .name = "microcode", - .fops = µcode_fops, -}; - -static int __init microcode_dev_init (void) -{ - int error; - - error = misc_register(µcode_dev); - if (error) { - printk(KERN_ERR - "microcode: can't misc_register on minor=%d\n", - MICROCODE_MINOR); - return error; - } - - return 0; -} - -static void microcode_dev_exit (void) -{ - misc_deregister(µcode_dev); -} - -MODULE_ALIAS_MISCDEV(MICROCODE_MINOR); -#else -#define microcode_dev_init() 0 -#define microcode_dev_exit() do { } while(0) -#endif - -static long get_next_ucode_from_buffer(void **mc, const u8 *buf, - unsigned long size, long offset) -{ - microcode_header_t *mc_header; - unsigned long total_size; - - /* No more data */ - if (offset >= size) - return 0; - mc_header = (microcode_header_t *)(buf + offset); - total_size = get_totalsize(mc_header); - - if (offset + total_size > size) { - printk(KERN_ERR "microcode: error! Bad data in microcode data file\n"); - return -EINVAL; - } - - *mc = vmalloc(total_size); - if (!*mc) { - printk(KERN_ERR "microcode: error! Can not allocate memory\n"); - return -ENOMEM; - } - memcpy(*mc, buf + offset, total_size); - return offset + total_size; -} - -/* fake device for request_firmware */ -static struct platform_device *microcode_pdev; - -static int cpu_request_microcode(int cpu) -{ - char name[30]; - struct cpuinfo_x86 *c = &cpu_data(cpu); - const struct firmware *firmware; - const u8 *buf; - unsigned long size; - long offset = 0; - int error; - void *mc; - - /* We should bind the task to the CPU */ - BUG_ON(cpu != raw_smp_processor_id()); - sprintf(name,"intel-ucode/%02x-%02x-%02x", - c->x86, c->x86_model, c->x86_mask); - error = request_firmware(&firmware, name, µcode_pdev->dev); - if (error) { - pr_debug("microcode: data file %s load failed\n", name); - return error; - } - buf = firmware->data; - size = firmware->size; - while ((offset = get_next_ucode_from_buffer(&mc, buf, size, offset)) - > 0) { - error = microcode_sanity_check(mc); - if (error) - break; - error = get_maching_microcode(mc, cpu); - if (error < 0) - break; - /* - * It's possible the data file has multiple matching ucode, - * lets keep searching till the latest version - */ - if (error == 1) { - apply_microcode(cpu); - error = 0; - } - vfree(mc); - } - if (offset > 0) - vfree(mc); - if (offset < 0) - error = offset; - release_firmware(firmware); - - return error; -} - -static int apply_microcode_check_cpu(int cpu) -{ - struct cpuinfo_x86 *c = &cpu_data(cpu); - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - cpumask_t old; - unsigned int val[2]; - int err = 0; - - /* Check if the microcode is available */ - if (!uci->mc) - return 0; - - old = current->cpus_allowed; - set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); - - /* Check if the microcode we have in memory matches the CPU */ - if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || - cpu_has(c, X86_FEATURE_IA64) || uci->sig != cpuid_eax(0x00000001)) - err = -EINVAL; - - if (!err && ((c->x86_model >= 5) || (c->x86 > 6))) { - /* get processor flags from MSR 0x17 */ - rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); - if (uci->pf != (1 << ((val[1] >> 18) & 7))) - err = -EINVAL; - } - - if (!err) { - wrmsr(MSR_IA32_UCODE_REV, 0, 0); - /* see notes above for revision 1.07. Apparent chip bug */ - sync_core(); - /* get the current revision from MSR 0x8B */ - rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); - if (uci->rev != val[1]) - err = -EINVAL; - } - - if (!err) - apply_microcode(cpu); - else - printk(KERN_ERR "microcode: Could not apply microcode to CPU%d:" - " sig=0x%x, pf=0x%x, rev=0x%x\n", - cpu, uci->sig, uci->pf, uci->rev); - - set_cpus_allowed_ptr(current, &old); - return err; -} - -static void microcode_init_cpu(int cpu, int resume) -{ - cpumask_t old; - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - - old = current->cpus_allowed; - - set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); - mutex_lock(µcode_mutex); - collect_cpu_info(cpu); - if (uci->valid && system_state == SYSTEM_RUNNING && !resume) - cpu_request_microcode(cpu); - mutex_unlock(µcode_mutex); - set_cpus_allowed_ptr(current, &old); -} - -static void microcode_fini_cpu(int cpu) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - - mutex_lock(µcode_mutex); - uci->valid = 0; - vfree(uci->mc); - uci->mc = NULL; - mutex_unlock(µcode_mutex); -} - -static ssize_t reload_store(struct sys_device *dev, - struct sysdev_attribute *attr, - const char *buf, size_t sz) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; - char *end; - unsigned long val = simple_strtoul(buf, &end, 0); - int err = 0; - int cpu = dev->id; - - if (end == buf) - return -EINVAL; - if (val == 1) { - cpumask_t old = current->cpus_allowed; - - get_online_cpus(); - set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); - - mutex_lock(µcode_mutex); - if (uci->valid) - err = cpu_request_microcode(cpu); - mutex_unlock(µcode_mutex); - put_online_cpus(); - set_cpus_allowed_ptr(current, &old); - } - if (err) - return err; - return sz; -} - -static ssize_t version_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; - - return sprintf(buf, "0x%x\n", uci->rev); -} - -static ssize_t pf_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *buf) -{ - struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; - - return sprintf(buf, "0x%x\n", uci->pf); -} - -static SYSDEV_ATTR(reload, 0200, NULL, reload_store); -static SYSDEV_ATTR(version, 0400, version_show, NULL); -static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL); - -static struct attribute *mc_default_attrs[] = { - &attr_reload.attr, - &attr_version.attr, - &attr_processor_flags.attr, - NULL -}; - -static struct attribute_group mc_attr_group = { - .attrs = mc_default_attrs, - .name = "microcode", -}; - -static int __mc_sysdev_add(struct sys_device *sys_dev, int resume) -{ - int err, cpu = sys_dev->id; - struct ucode_cpu_info *uci = ucode_cpu_info + cpu; - - if (!cpu_online(cpu)) - return 0; - - pr_debug("microcode: CPU%d added\n", cpu); - memset(uci, 0, sizeof(*uci)); - - err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group); - if (err) - return err; - - microcode_init_cpu(cpu, resume); - - return 0; -} - -static int mc_sysdev_add(struct sys_device *sys_dev) -{ - return __mc_sysdev_add(sys_dev, 0); -} - -static int mc_sysdev_remove(struct sys_device *sys_dev) -{ - int cpu = sys_dev->id; - - if (!cpu_online(cpu)) - return 0; - - pr_debug("microcode: CPU%d removed\n", cpu); - microcode_fini_cpu(cpu); - sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); - return 0; -} - -static int mc_sysdev_resume(struct sys_device *dev) -{ - int cpu = dev->id; - - if (!cpu_online(cpu)) - return 0; - pr_debug("microcode: CPU%d resumed\n", cpu); - /* only CPU 0 will apply ucode here */ - apply_microcode(0); - return 0; -} - -static struct sysdev_driver mc_sysdev_driver = { - .add = mc_sysdev_add, - .remove = mc_sysdev_remove, - .resume = mc_sysdev_resume, -}; - -static __cpuinit int -mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) -{ - unsigned int cpu = (unsigned long)hcpu; - struct sys_device *sys_dev; - - sys_dev = get_cpu_sysdev(cpu); - switch (action) { - case CPU_UP_CANCELED_FROZEN: - /* The CPU refused to come up during a system resume */ - microcode_fini_cpu(cpu); - break; - case CPU_ONLINE: - case CPU_DOWN_FAILED: - mc_sysdev_add(sys_dev); - break; - case CPU_ONLINE_FROZEN: - /* System-wide resume is in progress, try to apply microcode */ - if (apply_microcode_check_cpu(cpu)) { - /* The application of microcode failed */ - microcode_fini_cpu(cpu); - __mc_sysdev_add(sys_dev, 1); - break; - } - case CPU_DOWN_FAILED_FROZEN: - if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group)) - printk(KERN_ERR "microcode: Failed to create the sysfs " - "group for CPU%d\n", cpu); - break; - case CPU_DOWN_PREPARE: - mc_sysdev_remove(sys_dev); - break; - case CPU_DOWN_PREPARE_FROZEN: - /* Suspend is in progress, only remove the interface */ - sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); - break; - } - return NOTIFY_OK; -} - -static struct notifier_block __refdata mc_cpu_notifier = { - .notifier_call = mc_cpu_callback, -}; - -static int __init microcode_init (void) -{ - int error; - - printk(KERN_INFO - "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n"); - - error = microcode_dev_init(); - if (error) - return error; - microcode_pdev = platform_device_register_simple("microcode", -1, - NULL, 0); - if (IS_ERR(microcode_pdev)) { - microcode_dev_exit(); - return PTR_ERR(microcode_pdev); - } - - get_online_cpus(); - error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver); - put_online_cpus(); - if (error) { - microcode_dev_exit(); - platform_device_unregister(microcode_pdev); - return error; - } - - register_hotcpu_notifier(&mc_cpu_notifier); - return 0; -} - -static void __exit microcode_exit (void) -{ - microcode_dev_exit(); - - unregister_hotcpu_notifier(&mc_cpu_notifier); - - get_online_cpus(); - sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver); - put_online_cpus(); - - platform_device_unregister(microcode_pdev); -} - -module_init(microcode_init) -module_exit(microcode_exit) diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c new file mode 100644 index 000000000000..7a1f8eeac2c7 --- /dev/null +++ b/arch/x86/kernel/microcode_amd.c @@ -0,0 +1,435 @@ +/* + * AMD CPU Microcode Update Driver for Linux + * Copyright (C) 2008 Advanced Micro Devices Inc. + * + * Author: Peter Oruba <peter.oruba@amd.com> + * + * Based on work by: + * Tigran Aivazian <tigran@aivazian.fsnet.co.uk> + * + * This driver allows to upgrade microcode on AMD + * family 0x10 and 0x11 processors. + * + * Licensed unter the terms of the GNU General Public + * License version 2. See file COPYING for details. +*/ + +#include <linux/capability.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/cpumask.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/miscdevice.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/mutex.h> +#include <linux/cpu.h> +#include <linux/firmware.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> + +#include <asm/msr.h> +#include <asm/uaccess.h> +#include <asm/processor.h> +#include <asm/microcode.h> + +MODULE_DESCRIPTION("AMD Microcode Update Driver"); +MODULE_AUTHOR("Peter Oruba <peter.oruba@amd.com>"); +MODULE_LICENSE("GPL v2"); + +#define UCODE_MAGIC 0x00414d44 +#define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000 +#define UCODE_UCODE_TYPE 0x00000001 + +struct equiv_cpu_entry { + unsigned int installed_cpu; + unsigned int fixed_errata_mask; + unsigned int fixed_errata_compare; + unsigned int equiv_cpu; +}; + +struct microcode_header_amd { + unsigned int data_code; + unsigned int patch_id; + unsigned char mc_patch_data_id[2]; + unsigned char mc_patch_data_len; + unsigned char init_flag; + unsigned int mc_patch_data_checksum; + unsigned int nb_dev_id; + unsigned int sb_dev_id; + unsigned char processor_rev_id[2]; + unsigned char nb_rev_id; + unsigned char sb_rev_id; + unsigned char bios_api_rev; + unsigned char reserved1[3]; + unsigned int match_reg[8]; +}; + +struct microcode_amd { + struct microcode_header_amd hdr; + unsigned int mpb[0]; +}; + +#define UCODE_MAX_SIZE (2048) +#define DEFAULT_UCODE_DATASIZE (896) +#define MC_HEADER_SIZE (sizeof(struct microcode_header_amd)) +#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) +#define DWSIZE (sizeof(u32)) +/* For now we support a fixed ucode total size only */ +#define get_totalsize(mc) \ + ((((struct microcode_amd *)mc)->hdr.mc_patch_data_len * 28) \ + + MC_HEADER_SIZE) + +/* serialize access to the physical write */ +static DEFINE_SPINLOCK(microcode_update_lock); + +static struct equiv_cpu_entry *equiv_cpu_table; + +static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) +{ + struct cpuinfo_x86 *c = &cpu_data(cpu); + + memset(csig, 0, sizeof(*csig)); + + if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) { + printk(KERN_ERR "microcode: CPU%d not a capable AMD processor\n", + cpu); + return -1; + } + + asm volatile("movl %1, %%ecx; rdmsr" + : "=a" (csig->rev) + : "i" (0x0000008B) : "ecx"); + + printk(KERN_INFO "microcode: collect_cpu_info_amd : patch_id=0x%x\n", + csig->rev); + + return 0; +} + +static int get_matching_microcode(int cpu, void *mc, int rev) +{ + struct microcode_header_amd *mc_header = mc; + struct pci_dev *nb_pci_dev, *sb_pci_dev; + unsigned int current_cpu_id; + unsigned int equiv_cpu_id = 0x00; + unsigned int i = 0; + + BUG_ON(equiv_cpu_table == NULL); + current_cpu_id = cpuid_eax(0x00000001); + + while (equiv_cpu_table[i].installed_cpu != 0) { + if (current_cpu_id == equiv_cpu_table[i].installed_cpu) { + equiv_cpu_id = equiv_cpu_table[i].equiv_cpu; + break; + } + i++; + } + + if (!equiv_cpu_id) { + printk(KERN_ERR "microcode: CPU%d cpu_id " + "not found in equivalent cpu table \n", cpu); + return 0; + } + + if ((mc_header->processor_rev_id[0]) != (equiv_cpu_id & 0xff)) { + printk(KERN_ERR + "microcode: CPU%d patch does not match " + "(patch is %x, cpu extended is %x) \n", + cpu, mc_header->processor_rev_id[0], + (equiv_cpu_id & 0xff)); + return 0; + } + + if ((mc_header->processor_rev_id[1]) != ((equiv_cpu_id >> 16) & 0xff)) { + printk(KERN_ERR "microcode: CPU%d patch does not match " + "(patch is %x, cpu base id is %x) \n", + cpu, mc_header->processor_rev_id[1], + ((equiv_cpu_id >> 16) & 0xff)); + + return 0; + } + + /* ucode may be northbridge specific */ + if (mc_header->nb_dev_id) { + nb_pci_dev = pci_get_device(PCI_VENDOR_ID_AMD, + (mc_header->nb_dev_id & 0xff), + NULL); + if ((!nb_pci_dev) || + (mc_header->nb_rev_id != nb_pci_dev->revision)) { + printk(KERN_ERR "microcode: CPU%d NB mismatch \n", cpu); + pci_dev_put(nb_pci_dev); + return 0; + } + pci_dev_put(nb_pci_dev); + } + + /* ucode may be southbridge specific */ + if (mc_header->sb_dev_id) { + sb_pci_dev = pci_get_device(PCI_VENDOR_ID_AMD, + (mc_header->sb_dev_id & 0xff), + NULL); + if ((!sb_pci_dev) || + (mc_header->sb_rev_id != sb_pci_dev->revision)) { + printk(KERN_ERR "microcode: CPU%d SB mismatch \n", cpu); + pci_dev_put(sb_pci_dev); + return 0; + } + pci_dev_put(sb_pci_dev); + } + + if (mc_header->patch_id <= rev) + return 0; + + return 1; +} + +static void apply_microcode_amd(int cpu) +{ + unsigned long flags; + unsigned int eax, edx; + unsigned int rev; + int cpu_num = raw_smp_processor_id(); + struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num; + struct microcode_amd *mc_amd = uci->mc; + unsigned long addr; + + /* We should bind the task to the CPU */ + BUG_ON(cpu_num != cpu); + + if (mc_amd == NULL) + return; + + spin_lock_irqsave(µcode_update_lock, flags); + + addr = (unsigned long)&mc_amd->hdr.data_code; + edx = (unsigned int)(((unsigned long)upper_32_bits(addr))); + eax = (unsigned int)(((unsigned long)lower_32_bits(addr))); + + asm volatile("movl %0, %%ecx; wrmsr" : + : "i" (0xc0010020), "a" (eax), "d" (edx) : "ecx"); + + /* get patch id after patching */ + asm volatile("movl %1, %%ecx; rdmsr" + : "=a" (rev) + : "i" (0x0000008B) : "ecx"); + + spin_unlock_irqrestore(µcode_update_lock, flags); + + /* check current patch id and patch's id for match */ + if (rev != mc_amd->hdr.patch_id) { + printk(KERN_ERR "microcode: CPU%d update from revision " + "0x%x to 0x%x failed\n", cpu_num, + mc_amd->hdr.patch_id, rev); + return; + } + + printk(KERN_INFO "microcode: CPU%d updated from revision " + "0x%x to 0x%x \n", + cpu_num, uci->cpu_sig.rev, mc_amd->hdr.patch_id); + + uci->cpu_sig.rev = rev; +} + +static void * get_next_ucode(u8 *buf, unsigned int size, + int (*get_ucode_data)(void *, const void *, size_t), + unsigned int *mc_size) +{ + unsigned int total_size; +#define UCODE_CONTAINER_SECTION_HDR 8 + u8 section_hdr[UCODE_CONTAINER_SECTION_HDR]; + void *mc; + + if (get_ucode_data(section_hdr, buf, UCODE_CONTAINER_SECTION_HDR)) + return NULL; + + if (section_hdr[0] != UCODE_UCODE_TYPE) { + printk(KERN_ERR "microcode: error! " + "Wrong microcode payload type field\n"); + return NULL; + } + + total_size = (unsigned long) (section_hdr[4] + (section_hdr[5] << 8)); + + printk(KERN_INFO "microcode: size %u, total_size %u\n", + size, total_size); + + if (total_size > size || total_size > UCODE_MAX_SIZE) { + printk(KERN_ERR "microcode: error! Bad data in microcode data file\n"); + return NULL; + } + + mc = vmalloc(UCODE_MAX_SIZE); + if (mc) { + memset(mc, 0, UCODE_MAX_SIZE); + if (get_ucode_data(mc, buf + UCODE_CONTAINER_SECTION_HDR, total_size)) { + vfree(mc); + mc = NULL; + } else + *mc_size = total_size + UCODE_CONTAINER_SECTION_HDR; + } +#undef UCODE_CONTAINER_SECTION_HDR + return mc; +} + + +static int install_equiv_cpu_table(u8 *buf, + int (*get_ucode_data)(void *, const void *, size_t)) +{ +#define UCODE_CONTAINER_HEADER_SIZE 12 + u8 *container_hdr[UCODE_CONTAINER_HEADER_SIZE]; + unsigned int *buf_pos = (unsigned int *)container_hdr; + unsigned long size; + + if (get_ucode_data(&container_hdr, buf, UCODE_CONTAINER_HEADER_SIZE)) + return 0; + + size = buf_pos[2]; + + if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE || !size) { + printk(KERN_ERR "microcode: error! " + "Wrong microcode equivalnet cpu table\n"); + return 0; + } + + equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size); + if (!equiv_cpu_table) { + printk(KERN_ERR "microcode: error, can't allocate memory for equiv CPU table\n"); + return 0; + } + + buf += UCODE_CONTAINER_HEADER_SIZE; + if (get_ucode_data(equiv_cpu_table, buf, size)) { + vfree(equiv_cpu_table); + return 0; + } + + return size + UCODE_CONTAINER_HEADER_SIZE; /* add header length */ +#undef UCODE_CONTAINER_HEADER_SIZE +} + +static void free_equiv_cpu_table(void) +{ + if (equiv_cpu_table) { + vfree(equiv_cpu_table); + equiv_cpu_table = NULL; + } +} + +static int generic_load_microcode(int cpu, void *data, size_t size, + int (*get_ucode_data)(void *, const void *, size_t)) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + u8 *ucode_ptr = data, *new_mc = NULL, *mc; + int new_rev = uci->cpu_sig.rev; + unsigned int leftover; + unsigned long offset; + + offset = install_equiv_cpu_table(ucode_ptr, get_ucode_data); + if (!offset) { + printk(KERN_ERR "microcode: installing equivalent cpu table failed\n"); + return -EINVAL; + } + + ucode_ptr += offset; + leftover = size - offset; + + while (leftover) { + unsigned int uninitialized_var(mc_size); + struct microcode_header_amd *mc_header; + + mc = get_next_ucode(ucode_ptr, leftover, get_ucode_data, &mc_size); + if (!mc) + break; + + mc_header = (struct microcode_header_amd *)mc; + if (get_matching_microcode(cpu, mc, new_rev)) { + if (new_mc) + vfree(new_mc); + new_rev = mc_header->patch_id; + new_mc = mc; + } else + vfree(mc); + + ucode_ptr += mc_size; + leftover -= mc_size; + } + + if (new_mc) { + if (!leftover) { + if (uci->mc) + vfree(uci->mc); + uci->mc = new_mc; + pr_debug("microcode: CPU%d found a matching microcode update with" + " version 0x%x (current=0x%x)\n", + cpu, new_rev, uci->cpu_sig.rev); + } else + vfree(new_mc); + } + + free_equiv_cpu_table(); + + return (int)leftover; +} + +static int get_ucode_fw(void *to, const void *from, size_t n) +{ + memcpy(to, from, n); + return 0; +} + +static int request_microcode_fw(int cpu, struct device *device) +{ + const char *fw_name = "amd-ucode/microcode_amd.bin"; + const struct firmware *firmware; + int ret; + + /* We should bind the task to the CPU */ + BUG_ON(cpu != raw_smp_processor_id()); + + ret = request_firmware(&firmware, fw_name, device); + if (ret) { + printk(KERN_ERR "microcode: ucode data file %s load failed\n", fw_name); + return ret; + } + + ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size, + &get_ucode_fw); + + release_firmware(firmware); + + return ret; +} + +static int request_microcode_user(int cpu, const void __user *buf, size_t size) +{ + printk(KERN_WARNING "microcode: AMD microcode update via /dev/cpu/microcode" + "is not supported\n"); + return -1; +} + +static void microcode_fini_cpu_amd(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + vfree(uci->mc); + uci->mc = NULL; +} + +static struct microcode_ops microcode_amd_ops = { + .request_microcode_user = request_microcode_user, + .request_microcode_fw = request_microcode_fw, + .collect_cpu_info = collect_cpu_info_amd, + .apply_microcode = apply_microcode_amd, + .microcode_fini_cpu = microcode_fini_cpu_amd, +}; + +struct microcode_ops * __init init_amd_microcode(void) +{ + return µcode_amd_ops; +} diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c new file mode 100644 index 000000000000..936d8d55f230 --- /dev/null +++ b/arch/x86/kernel/microcode_core.c @@ -0,0 +1,508 @@ +/* + * Intel CPU Microcode Update Driver for Linux + * + * Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk> + * 2006 Shaohua Li <shaohua.li@intel.com> + * + * This driver allows to upgrade microcode on Intel processors + * belonging to IA-32 family - PentiumPro, Pentium II, + * Pentium III, Xeon, Pentium 4, etc. + * + * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture + * Software Developer's Manual + * Order Number 253668 or free download from: + * + * http://developer.intel.com/design/pentium4/manuals/253668.htm + * + * For more information, go to http://www.urbanmyth.org/microcode + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Initial release. + * 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Added read() support + cleanups. + * 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Added 'device trimming' support. open(O_WRONLY) zeroes + * and frees the saved copy of applied microcode. + * 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Made to use devfs (/dev/cpu/microcode) + cleanups. + * 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com> + * Added misc device support (now uses both devfs and misc). + * Added MICROCODE_IOCFREE ioctl to clear memory. + * 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com> + * Messages for error cases (non Intel & no suitable microcode). + * 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com> + * Removed ->release(). Removed exclusive open and status bitmap. + * Added microcode_rwsem to serialize read()/write()/ioctl(). + * Removed global kernel lock usage. + * 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com> + * Write 0 to 0x8B msr and then cpuid before reading revision, + * so that it works even if there were no update done by the + * BIOS. Otherwise, reading from 0x8B gives junk (which happened + * to be 0 on my machine which is why it worked even when I + * disabled update by the BIOS) + * Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix. + * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and + * Tigran Aivazian <tigran@veritas.com> + * Intel Pentium 4 processor support and bugfixes. + * 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com> + * Bugfix for HT (Hyper-Threading) enabled processors + * whereby processor resources are shared by all logical processors + * in a single CPU package. + * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and + * Tigran Aivazian <tigran@veritas.com>, + * Serialize updates as required on HT processors due to + * speculative nature of implementation. + * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com> + * Fix the panic when writing zero-length microcode chunk. + * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, + * Jun Nakajima <jun.nakajima@intel.com> + * Support for the microcode updates in the new format. + * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com> + * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl + * because we no longer hold a copy of applied microcode + * in kernel memory. + * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com> + * Fix sigmatch() macro to handle old CPUs with pf == 0. + * Thanks to Stuart Swales for pointing out this bug. + */ +#include <linux/capability.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/smp_lock.h> +#include <linux/cpumask.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/miscdevice.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/mutex.h> +#include <linux/cpu.h> +#include <linux/firmware.h> +#include <linux/platform_device.h> + +#include <asm/msr.h> +#include <asm/uaccess.h> +#include <asm/processor.h> +#include <asm/microcode.h> + +MODULE_DESCRIPTION("Microcode Update Driver"); +MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>"); +MODULE_LICENSE("GPL"); + +#define MICROCODE_VERSION "2.00" + +struct microcode_ops *microcode_ops; + +/* no concurrent ->write()s are allowed on /dev/cpu/microcode */ +static DEFINE_MUTEX(microcode_mutex); + +struct ucode_cpu_info ucode_cpu_info[NR_CPUS]; +EXPORT_SYMBOL_GPL(ucode_cpu_info); + +#ifdef CONFIG_MICROCODE_OLD_INTERFACE +static int do_microcode_update(const void __user *buf, size_t size) +{ + cpumask_t old; + int error = 0; + int cpu; + + old = current->cpus_allowed; + + for_each_online_cpu(cpu) { + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + if (!uci->valid) + continue; + + set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); + error = microcode_ops->request_microcode_user(cpu, buf, size); + if (error < 0) + goto out; + if (!error) + microcode_ops->apply_microcode(cpu); + } +out: + set_cpus_allowed_ptr(current, &old); + return error; +} + +static int microcode_open(struct inode *unused1, struct file *unused2) +{ + cycle_kernel_lock(); + return capable(CAP_SYS_RAWIO) ? 0 : -EPERM; +} + +static ssize_t microcode_write(struct file *file, const char __user *buf, + size_t len, loff_t *ppos) +{ + ssize_t ret; + + if ((len >> PAGE_SHIFT) > num_physpages) { + printk(KERN_ERR "microcode: too much data (max %ld pages)\n", + num_physpages); + return -EINVAL; + } + + get_online_cpus(); + mutex_lock(µcode_mutex); + + ret = do_microcode_update(buf, len); + if (!ret) + ret = (ssize_t)len; + + mutex_unlock(µcode_mutex); + put_online_cpus(); + + return ret; +} + +static const struct file_operations microcode_fops = { + .owner = THIS_MODULE, + .write = microcode_write, + .open = microcode_open, +}; + +static struct miscdevice microcode_dev = { + .minor = MICROCODE_MINOR, + .name = "microcode", + .fops = µcode_fops, +}; + +static int __init microcode_dev_init(void) +{ + int error; + + error = misc_register(µcode_dev); + if (error) { + printk(KERN_ERR + "microcode: can't misc_register on minor=%d\n", + MICROCODE_MINOR); + return error; + } + + return 0; +} + +static void microcode_dev_exit(void) +{ + misc_deregister(µcode_dev); +} + +MODULE_ALIAS_MISCDEV(MICROCODE_MINOR); +#else +#define microcode_dev_init() 0 +#define microcode_dev_exit() do { } while (0) +#endif + +/* fake device for request_firmware */ +struct platform_device *microcode_pdev; + +static ssize_t reload_store(struct sys_device *dev, + struct sysdev_attribute *attr, + const char *buf, size_t sz) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + char *end; + unsigned long val = simple_strtoul(buf, &end, 0); + int err = 0; + int cpu = dev->id; + + if (end == buf) + return -EINVAL; + if (val == 1) { + cpumask_t old = current->cpus_allowed; + + get_online_cpus(); + if (cpu_online(cpu)) { + set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); + mutex_lock(µcode_mutex); + if (uci->valid) { + err = microcode_ops->request_microcode_fw(cpu, + µcode_pdev->dev); + if (!err) + microcode_ops->apply_microcode(cpu); + } + mutex_unlock(µcode_mutex); + set_cpus_allowed_ptr(current, &old); + } + put_online_cpus(); + } + if (err) + return err; + return sz; +} + +static ssize_t version_show(struct sys_device *dev, + struct sysdev_attribute *attr, char *buf) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + + return sprintf(buf, "0x%x\n", uci->cpu_sig.rev); +} + +static ssize_t pf_show(struct sys_device *dev, + struct sysdev_attribute *attr, char *buf) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + dev->id; + + return sprintf(buf, "0x%x\n", uci->cpu_sig.pf); +} + +static SYSDEV_ATTR(reload, 0200, NULL, reload_store); +static SYSDEV_ATTR(version, 0400, version_show, NULL); +static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL); + +static struct attribute *mc_default_attrs[] = { + &attr_reload.attr, + &attr_version.attr, + &attr_processor_flags.attr, + NULL +}; + +static struct attribute_group mc_attr_group = { + .attrs = mc_default_attrs, + .name = "microcode", +}; + +static void microcode_fini_cpu(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + mutex_lock(µcode_mutex); + microcode_ops->microcode_fini_cpu(cpu); + uci->valid = 0; + mutex_unlock(µcode_mutex); +} + +static void collect_cpu_info(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + memset(uci, 0, sizeof(*uci)); + if (!microcode_ops->collect_cpu_info(cpu, &uci->cpu_sig)) + uci->valid = 1; +} + +static int microcode_resume_cpu(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + struct cpu_signature nsig; + + pr_debug("microcode: CPU%d resumed\n", cpu); + + if (!uci->mc) + return 1; + + /* + * Let's verify that the 'cached' ucode does belong + * to this cpu (a bit of paranoia): + */ + if (microcode_ops->collect_cpu_info(cpu, &nsig)) { + microcode_fini_cpu(cpu); + return -1; + } + + if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) { + microcode_fini_cpu(cpu); + /* Should we look for a new ucode here? */ + return 1; + } + + return 0; +} + +void microcode_update_cpu(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + int err = 0; + + /* + * Check if the system resume is in progress (uci->valid != NULL), + * otherwise just request a firmware: + */ + if (uci->valid) { + err = microcode_resume_cpu(cpu); + } else { + collect_cpu_info(cpu); + if (uci->valid && system_state == SYSTEM_RUNNING) + err = microcode_ops->request_microcode_fw(cpu, + µcode_pdev->dev); + } + if (!err) + microcode_ops->apply_microcode(cpu); +} + +static void microcode_init_cpu(int cpu) +{ + cpumask_t old = current->cpus_allowed; + + set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); + /* We should bind the task to the CPU */ + BUG_ON(raw_smp_processor_id() != cpu); + + mutex_lock(µcode_mutex); + microcode_update_cpu(cpu); + mutex_unlock(µcode_mutex); + + set_cpus_allowed_ptr(current, &old); +} + +static int mc_sysdev_add(struct sys_device *sys_dev) +{ + int err, cpu = sys_dev->id; + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + if (!cpu_online(cpu)) + return 0; + + pr_debug("microcode: CPU%d added\n", cpu); + memset(uci, 0, sizeof(*uci)); + + err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group); + if (err) + return err; + + microcode_init_cpu(cpu); + return 0; +} + +static int mc_sysdev_remove(struct sys_device *sys_dev) +{ + int cpu = sys_dev->id; + + if (!cpu_online(cpu)) + return 0; + + pr_debug("microcode: CPU%d removed\n", cpu); + microcode_fini_cpu(cpu); + sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); + return 0; +} + +static int mc_sysdev_resume(struct sys_device *dev) +{ + int cpu = dev->id; + + if (!cpu_online(cpu)) + return 0; + + /* only CPU 0 will apply ucode here */ + microcode_update_cpu(0); + return 0; +} + +static struct sysdev_driver mc_sysdev_driver = { + .add = mc_sysdev_add, + .remove = mc_sysdev_remove, + .resume = mc_sysdev_resume, +}; + +static __cpuinit int +mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + struct sys_device *sys_dev; + + sys_dev = get_cpu_sysdev(cpu); + switch (action) { + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + microcode_init_cpu(cpu); + case CPU_DOWN_FAILED: + case CPU_DOWN_FAILED_FROZEN: + pr_debug("microcode: CPU%d added\n", cpu); + if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group)) + printk(KERN_ERR "microcode: Failed to create the sysfs " + "group for CPU%d\n", cpu); + break; + case CPU_DOWN_PREPARE: + case CPU_DOWN_PREPARE_FROZEN: + /* Suspend is in progress, only remove the interface */ + sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); + pr_debug("microcode: CPU%d removed\n", cpu); + break; + case CPU_DEAD: + case CPU_UP_CANCELED_FROZEN: + /* The CPU refused to come up during a system resume */ + microcode_fini_cpu(cpu); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block __refdata mc_cpu_notifier = { + .notifier_call = mc_cpu_callback, +}; + +static int __init microcode_init(void) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + int error; + + if (c->x86_vendor == X86_VENDOR_INTEL) + microcode_ops = init_intel_microcode(); + else if (c->x86_vendor == X86_VENDOR_AMD) + microcode_ops = init_amd_microcode(); + + if (!microcode_ops) { + printk(KERN_ERR "microcode: no support for this CPU vendor\n"); + return -ENODEV; + } + + error = microcode_dev_init(); + if (error) + return error; + microcode_pdev = platform_device_register_simple("microcode", -1, + NULL, 0); + if (IS_ERR(microcode_pdev)) { + microcode_dev_exit(); + return PTR_ERR(microcode_pdev); + } + + get_online_cpus(); + error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver); + put_online_cpus(); + if (error) { + microcode_dev_exit(); + platform_device_unregister(microcode_pdev); + return error; + } + + register_hotcpu_notifier(&mc_cpu_notifier); + + printk(KERN_INFO + "Microcode Update Driver: v" MICROCODE_VERSION + " <tigran@aivazian.fsnet.co.uk>" + " <peter.oruba@amd.com>\n"); + + return 0; +} + +static void __exit microcode_exit(void) +{ + microcode_dev_exit(); + + unregister_hotcpu_notifier(&mc_cpu_notifier); + + get_online_cpus(); + sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver); + put_online_cpus(); + + platform_device_unregister(microcode_pdev); + + microcode_ops = NULL; + + printk(KERN_INFO + "Microcode Update Driver: v" MICROCODE_VERSION " removed.\n"); +} + +module_init(microcode_init); +module_exit(microcode_exit); diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c new file mode 100644 index 000000000000..622dc4a21784 --- /dev/null +++ b/arch/x86/kernel/microcode_intel.c @@ -0,0 +1,480 @@ +/* + * Intel CPU Microcode Update Driver for Linux + * + * Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk> + * 2006 Shaohua Li <shaohua.li@intel.com> + * + * This driver allows to upgrade microcode on Intel processors + * belonging to IA-32 family - PentiumPro, Pentium II, + * Pentium III, Xeon, Pentium 4, etc. + * + * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture + * Software Developer's Manual + * Order Number 253668 or free download from: + * + * http://developer.intel.com/design/pentium4/manuals/253668.htm + * + * For more information, go to http://www.urbanmyth.org/microcode + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Initial release. + * 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Added read() support + cleanups. + * 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Added 'device trimming' support. open(O_WRONLY) zeroes + * and frees the saved copy of applied microcode. + * 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com> + * Made to use devfs (/dev/cpu/microcode) + cleanups. + * 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com> + * Added misc device support (now uses both devfs and misc). + * Added MICROCODE_IOCFREE ioctl to clear memory. + * 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com> + * Messages for error cases (non Intel & no suitable microcode). + * 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com> + * Removed ->release(). Removed exclusive open and status bitmap. + * Added microcode_rwsem to serialize read()/write()/ioctl(). + * Removed global kernel lock usage. + * 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com> + * Write 0 to 0x8B msr and then cpuid before reading revision, + * so that it works even if there were no update done by the + * BIOS. Otherwise, reading from 0x8B gives junk (which happened + * to be 0 on my machine which is why it worked even when I + * disabled update by the BIOS) + * Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix. + * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and + * Tigran Aivazian <tigran@veritas.com> + * Intel Pentium 4 processor support and bugfixes. + * 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com> + * Bugfix for HT (Hyper-Threading) enabled processors + * whereby processor resources are shared by all logical processors + * in a single CPU package. + * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and + * Tigran Aivazian <tigran@veritas.com>, + * Serialize updates as required on HT processors due to + * speculative nature of implementation. + * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com> + * Fix the panic when writing zero-length microcode chunk. + * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>, + * Jun Nakajima <jun.nakajima@intel.com> + * Support for the microcode updates in the new format. + * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com> + * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl + * because we no longer hold a copy of applied microcode + * in kernel memory. + * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com> + * Fix sigmatch() macro to handle old CPUs with pf == 0. + * Thanks to Stuart Swales for pointing out this bug. + */ +#include <linux/capability.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/smp_lock.h> +#include <linux/cpumask.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/miscdevice.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/mutex.h> +#include <linux/cpu.h> +#include <linux/firmware.h> +#include <linux/platform_device.h> + +#include <asm/msr.h> +#include <asm/uaccess.h> +#include <asm/processor.h> +#include <asm/microcode.h> + +MODULE_DESCRIPTION("Microcode Update Driver"); +MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>"); +MODULE_LICENSE("GPL"); + +struct microcode_header_intel { + unsigned int hdrver; + unsigned int rev; + unsigned int date; + unsigned int sig; + unsigned int cksum; + unsigned int ldrver; + unsigned int pf; + unsigned int datasize; + unsigned int totalsize; + unsigned int reserved[3]; +}; + +struct microcode_intel { + struct microcode_header_intel hdr; + unsigned int bits[0]; +}; + +/* microcode format is extended from prescott processors */ +struct extended_signature { + unsigned int sig; + unsigned int pf; + unsigned int cksum; +}; + +struct extended_sigtable { + unsigned int count; + unsigned int cksum; + unsigned int reserved[3]; + struct extended_signature sigs[0]; +}; + +#define DEFAULT_UCODE_DATASIZE (2000) +#define MC_HEADER_SIZE (sizeof(struct microcode_header_intel)) +#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) +#define EXT_HEADER_SIZE (sizeof(struct extended_sigtable)) +#define EXT_SIGNATURE_SIZE (sizeof(struct extended_signature)) +#define DWSIZE (sizeof(u32)) +#define get_totalsize(mc) \ + (((struct microcode_intel *)mc)->hdr.totalsize ? \ + ((struct microcode_intel *)mc)->hdr.totalsize : \ + DEFAULT_UCODE_TOTALSIZE) + +#define get_datasize(mc) \ + (((struct microcode_intel *)mc)->hdr.datasize ? \ + ((struct microcode_intel *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE) + +#define sigmatch(s1, s2, p1, p2) \ + (((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0)))) + +#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE) + +/* serialize access to the physical write to MSR 0x79 */ +static DEFINE_SPINLOCK(microcode_update_lock); + +static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) +{ + struct cpuinfo_x86 *c = &cpu_data(cpu_num); + unsigned int val[2]; + + memset(csig, 0, sizeof(*csig)); + + if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || + cpu_has(c, X86_FEATURE_IA64)) { + printk(KERN_ERR "microcode: CPU%d not a capable Intel " + "processor\n", cpu_num); + return -1; + } + + csig->sig = cpuid_eax(0x00000001); + + if ((c->x86_model >= 5) || (c->x86 > 6)) { + /* get processor flags from MSR 0x17 */ + rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]); + csig->pf = 1 << ((val[1] >> 18) & 7); + } + + wrmsr(MSR_IA32_UCODE_REV, 0, 0); + /* see notes above for revision 1.07. Apparent chip bug */ + sync_core(); + /* get the current revision from MSR 0x8B */ + rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev); + pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n", + csig->sig, csig->pf, csig->rev); + + return 0; +} + +static inline int update_match_cpu(struct cpu_signature *csig, int sig, int pf) +{ + return (!sigmatch(sig, csig->sig, pf, csig->pf)) ? 0 : 1; +} + +static inline int +update_match_revision(struct microcode_header_intel *mc_header, int rev) +{ + return (mc_header->rev <= rev) ? 0 : 1; +} + +static int microcode_sanity_check(void *mc) +{ + struct microcode_header_intel *mc_header = mc; + struct extended_sigtable *ext_header = NULL; + struct extended_signature *ext_sig; + unsigned long total_size, data_size, ext_table_size; + int sum, orig_sum, ext_sigcount = 0, i; + + total_size = get_totalsize(mc_header); + data_size = get_datasize(mc_header); + if (data_size + MC_HEADER_SIZE > total_size) { + printk(KERN_ERR "microcode: error! " + "Bad data size in microcode data file\n"); + return -EINVAL; + } + + if (mc_header->ldrver != 1 || mc_header->hdrver != 1) { + printk(KERN_ERR "microcode: error! " + "Unknown microcode update format\n"); + return -EINVAL; + } + ext_table_size = total_size - (MC_HEADER_SIZE + data_size); + if (ext_table_size) { + if ((ext_table_size < EXT_HEADER_SIZE) + || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) { + printk(KERN_ERR "microcode: error! " + "Small exttable size in microcode data file\n"); + return -EINVAL; + } + ext_header = mc + MC_HEADER_SIZE + data_size; + if (ext_table_size != exttable_size(ext_header)) { + printk(KERN_ERR "microcode: error! " + "Bad exttable size in microcode data file\n"); + return -EFAULT; + } + ext_sigcount = ext_header->count; + } + + /* check extended table checksum */ + if (ext_table_size) { + int ext_table_sum = 0; + int *ext_tablep = (int *)ext_header; + + i = ext_table_size / DWSIZE; + while (i--) + ext_table_sum += ext_tablep[i]; + if (ext_table_sum) { + printk(KERN_WARNING "microcode: aborting, " + "bad extended signature table checksum\n"); + return -EINVAL; + } + } + + /* calculate the checksum */ + orig_sum = 0; + i = (MC_HEADER_SIZE + data_size) / DWSIZE; + while (i--) + orig_sum += ((int *)mc)[i]; + if (orig_sum) { + printk(KERN_ERR "microcode: aborting, bad checksum\n"); + return -EINVAL; + } + if (!ext_table_size) + return 0; + /* check extended signature checksum */ + for (i = 0; i < ext_sigcount; i++) { + ext_sig = (void *)ext_header + EXT_HEADER_SIZE + + EXT_SIGNATURE_SIZE * i; + sum = orig_sum + - (mc_header->sig + mc_header->pf + mc_header->cksum) + + (ext_sig->sig + ext_sig->pf + ext_sig->cksum); + if (sum) { + printk(KERN_ERR "microcode: aborting, bad checksum\n"); + return -EINVAL; + } + } + return 0; +} + +/* + * return 0 - no update found + * return 1 - found update + */ +static int +get_matching_microcode(struct cpu_signature *cpu_sig, void *mc, int rev) +{ + struct microcode_header_intel *mc_header = mc; + struct extended_sigtable *ext_header; + unsigned long total_size = get_totalsize(mc_header); + int ext_sigcount, i; + struct extended_signature *ext_sig; + + if (!update_match_revision(mc_header, rev)) + return 0; + + if (update_match_cpu(cpu_sig, mc_header->sig, mc_header->pf)) + return 1; + + /* Look for ext. headers: */ + if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE) + return 0; + + ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE; + ext_sigcount = ext_header->count; + ext_sig = (void *)ext_header + EXT_HEADER_SIZE; + + for (i = 0; i < ext_sigcount; i++) { + if (update_match_cpu(cpu_sig, ext_sig->sig, ext_sig->pf)) + return 1; + ext_sig++; + } + return 0; +} + +static void apply_microcode(int cpu) +{ + unsigned long flags; + unsigned int val[2]; + int cpu_num = raw_smp_processor_id(); + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + struct microcode_intel *mc_intel = uci->mc; + + /* We should bind the task to the CPU */ + BUG_ON(cpu_num != cpu); + + if (mc_intel == NULL) + return; + + /* serialize access to the physical write to MSR 0x79 */ + spin_lock_irqsave(µcode_update_lock, flags); + + /* write microcode via MSR 0x79 */ + wrmsr(MSR_IA32_UCODE_WRITE, + (unsigned long) mc_intel->bits, + (unsigned long) mc_intel->bits >> 16 >> 16); + wrmsr(MSR_IA32_UCODE_REV, 0, 0); + + /* see notes above for revision 1.07. Apparent chip bug */ + sync_core(); + + /* get the current revision from MSR 0x8B */ + rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); + + spin_unlock_irqrestore(µcode_update_lock, flags); + if (val[1] != mc_intel->hdr.rev) { + printk(KERN_ERR "microcode: CPU%d update from revision " + "0x%x to 0x%x failed\n", cpu_num, uci->cpu_sig.rev, val[1]); + return; + } + printk(KERN_INFO "microcode: CPU%d updated from revision " + "0x%x to 0x%x, date = %04x-%02x-%02x \n", + cpu_num, uci->cpu_sig.rev, val[1], + mc_intel->hdr.date & 0xffff, + mc_intel->hdr.date >> 24, + (mc_intel->hdr.date >> 16) & 0xff); + uci->cpu_sig.rev = val[1]; +} + +static int generic_load_microcode(int cpu, void *data, size_t size, + int (*get_ucode_data)(void *, const void *, size_t)) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + u8 *ucode_ptr = data, *new_mc = NULL, *mc; + int new_rev = uci->cpu_sig.rev; + unsigned int leftover = size; + + while (leftover) { + struct microcode_header_intel mc_header; + unsigned int mc_size; + + if (get_ucode_data(&mc_header, ucode_ptr, sizeof(mc_header))) + break; + + mc_size = get_totalsize(&mc_header); + if (!mc_size || mc_size > leftover) { + printk(KERN_ERR "microcode: error!" + "Bad data in microcode data file\n"); + break; + } + + mc = vmalloc(mc_size); + if (!mc) + break; + + if (get_ucode_data(mc, ucode_ptr, mc_size) || + microcode_sanity_check(mc) < 0) { + vfree(mc); + break; + } + + if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) { + if (new_mc) + vfree(new_mc); + new_rev = mc_header.rev; + new_mc = mc; + } else + vfree(mc); + + ucode_ptr += mc_size; + leftover -= mc_size; + } + + if (new_mc) { + if (!leftover) { + if (uci->mc) + vfree(uci->mc); + uci->mc = (struct microcode_intel *)new_mc; + pr_debug("microcode: CPU%d found a matching microcode update with" + " version 0x%x (current=0x%x)\n", + cpu, new_rev, uci->cpu_sig.rev); + } else + vfree(new_mc); + } + + return (int)leftover; +} + +static int get_ucode_fw(void *to, const void *from, size_t n) +{ + memcpy(to, from, n); + return 0; +} + +static int request_microcode_fw(int cpu, struct device *device) +{ + char name[30]; + struct cpuinfo_x86 *c = &cpu_data(cpu); + const struct firmware *firmware; + int ret; + + /* We should bind the task to the CPU */ + BUG_ON(cpu != raw_smp_processor_id()); + sprintf(name, "intel-ucode/%02x-%02x-%02x", + c->x86, c->x86_model, c->x86_mask); + ret = request_firmware(&firmware, name, device); + if (ret) { + pr_debug("microcode: data file %s load failed\n", name); + return ret; + } + + ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size, + &get_ucode_fw); + + release_firmware(firmware); + + return ret; +} + +static int get_ucode_user(void *to, const void *from, size_t n) +{ + return copy_from_user(to, from, n); +} + +static int request_microcode_user(int cpu, const void __user *buf, size_t size) +{ + /* We should bind the task to the CPU */ + BUG_ON(cpu != raw_smp_processor_id()); + + return generic_load_microcode(cpu, (void*)buf, size, &get_ucode_user); +} + +static void microcode_fini_cpu(int cpu) +{ + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + vfree(uci->mc); + uci->mc = NULL; +} + +struct microcode_ops microcode_intel_ops = { + .request_microcode_user = request_microcode_user, + .request_microcode_fw = request_microcode_fw, + .collect_cpu_info = collect_cpu_info, + .apply_microcode = apply_microcode, + .microcode_fini_cpu = microcode_fini_cpu, +}; + +struct microcode_ops * __init init_intel_microcode(void) +{ + return µcode_intel_ops; +} + diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 42ec4421e10b..0a6d8c12e10d 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -40,7 +40,9 @@ enum x86_regset { REGSET_GENERAL, REGSET_FP, REGSET_XFP, + REGSET_IOPERM64 = REGSET_XFP, REGSET_TLS, + REGSET_IOPERM32, }; /* @@ -555,6 +557,29 @@ static int ptrace_set_debugreg(struct task_struct *child, return 0; } +/* + * These access the current or another (stopped) task's io permission + * bitmap for debugging or core dump. + */ +static int ioperm_active(struct task_struct *target, + const struct user_regset *regset) +{ + return target->thread.io_bitmap_max / regset->size; +} + +static int ioperm_get(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) +{ + if (!target->thread.io_bitmap_ptr) + return -ENXIO; + + return user_regset_copyout(&pos, &count, &kbuf, &ubuf, + target->thread.io_bitmap_ptr, + 0, IO_BITMAP_BYTES); +} + #ifdef CONFIG_X86_PTRACE_BTS /* * The configuration for a particular BTS hardware implementation. @@ -1385,6 +1410,12 @@ static const struct user_regset x86_64_regsets[] = { .size = sizeof(long), .align = sizeof(long), .active = xfpregs_active, .get = xfpregs_get, .set = xfpregs_set }, + [REGSET_IOPERM64] = { + .core_note_type = NT_386_IOPERM, + .n = IO_BITMAP_LONGS, + .size = sizeof(long), .align = sizeof(long), + .active = ioperm_active, .get = ioperm_get + }, }; static const struct user_regset_view user_x86_64_view = { @@ -1431,6 +1462,12 @@ static const struct user_regset x86_32_regsets[] = { .active = regset_tls_active, .get = regset_tls_get, .set = regset_tls_set }, + [REGSET_IOPERM32] = { + .core_note_type = NT_386_IOPERM, + .n = IO_BITMAP_BYTES / sizeof(u32), + .size = sizeof(u32), .align = sizeof(u32), + .active = ioperm_active, .get = ioperm_get + }, }; static const struct user_regset_view user_x86_32_view = { diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 46c98efbbf8d..21b8e0a59780 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -582,6 +582,190 @@ static struct x86_quirks default_x86_quirks __initdata; struct x86_quirks *x86_quirks __initdata = &default_x86_quirks; /* + * Some BIOSes seem to corrupt the low 64k of memory during events + * like suspend/resume and unplugging an HDMI cable. Reserve all + * remaining free memory in that area and fill it with a distinct + * pattern. + */ +#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION +#define MAX_SCAN_AREAS 8 + +static int __read_mostly memory_corruption_check = -1; + +static unsigned __read_mostly corruption_check_size = 64*1024; +static unsigned __read_mostly corruption_check_period = 60; /* seconds */ + +static struct e820entry scan_areas[MAX_SCAN_AREAS]; +static int num_scan_areas; + + +static int set_corruption_check(char *arg) +{ + char *end; + + memory_corruption_check = simple_strtol(arg, &end, 10); + + return (*end == 0) ? 0 : -EINVAL; +} +early_param("memory_corruption_check", set_corruption_check); + +static int set_corruption_check_period(char *arg) +{ + char *end; + + corruption_check_period = simple_strtoul(arg, &end, 10); + + return (*end == 0) ? 0 : -EINVAL; +} +early_param("memory_corruption_check_period", set_corruption_check_period); + +static int set_corruption_check_size(char *arg) +{ + char *end; + unsigned size; + + size = memparse(arg, &end); + + if (*end == '\0') + corruption_check_size = size; + + return (size == corruption_check_size) ? 0 : -EINVAL; +} +early_param("memory_corruption_check_size", set_corruption_check_size); + + +static void __init setup_bios_corruption_check(void) +{ + u64 addr = PAGE_SIZE; /* assume first page is reserved anyway */ + + if (memory_corruption_check == -1) { + memory_corruption_check = +#ifdef CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK + 1 +#else + 0 +#endif + ; + } + + if (corruption_check_size == 0) + memory_corruption_check = 0; + + if (!memory_corruption_check) + return; + + corruption_check_size = round_up(corruption_check_size, PAGE_SIZE); + + while(addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) { + u64 size; + addr = find_e820_area_size(addr, &size, PAGE_SIZE); + + if (addr == 0) + break; + + if ((addr + size) > corruption_check_size) + size = corruption_check_size - addr; + + if (size == 0) + break; + + e820_update_range(addr, size, E820_RAM, E820_RESERVED); + scan_areas[num_scan_areas].addr = addr; + scan_areas[num_scan_areas].size = size; + num_scan_areas++; + + /* Assume we've already mapped this early memory */ + memset(__va(addr), 0, size); + + addr += size; + } + + printk(KERN_INFO "Scanning %d areas for low memory corruption\n", + num_scan_areas); + update_e820(); +} + +static struct timer_list periodic_check_timer; + +void check_for_bios_corruption(void) +{ + int i; + int corruption = 0; + + if (!memory_corruption_check) + return; + + for(i = 0; i < num_scan_areas; i++) { + unsigned long *addr = __va(scan_areas[i].addr); + unsigned long size = scan_areas[i].size; + + for(; size; addr++, size -= sizeof(unsigned long)) { + if (!*addr) + continue; + printk(KERN_ERR "Corrupted low memory at %p (%lx phys) = %08lx\n", + addr, __pa(addr), *addr); + corruption = 1; + *addr = 0; + } + } + + WARN(corruption, KERN_ERR "Memory corruption detected in low memory\n"); +} + +static void periodic_check_for_corruption(unsigned long data) +{ + check_for_bios_corruption(); + mod_timer(&periodic_check_timer, round_jiffies(jiffies + corruption_check_period*HZ)); +} + +void start_periodic_check_for_corruption(void) +{ + if (!memory_corruption_check || corruption_check_period == 0) + return; + + printk(KERN_INFO "Scanning for low memory corruption every %d seconds\n", + corruption_check_period); + + init_timer(&periodic_check_timer); + periodic_check_timer.function = &periodic_check_for_corruption; + periodic_check_for_corruption(0); +} +#endif + +static int __init dmi_low_memory_corruption(const struct dmi_system_id *d) +{ + printk(KERN_NOTICE + "%s detected: BIOS may corrupt low RAM, working it around.\n", + d->ident); + + e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED); + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); + + return 0; +} + +/* List of systems that have known low memory corruption BIOS problems */ +static struct dmi_system_id __initdata bad_bios_dmi_table[] = { +#ifdef CONFIG_X86_RESERVE_LOW_64K + { + .callback = dmi_low_memory_corruption, + .ident = "AMI BIOS", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), + }, + }, + { + .callback = dmi_low_memory_corruption, + .ident = "Phoenix BIOS", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), + }, + }, +#endif + {} +}; + +/* * Determine if we were loaded by an EFI loader. If so, then we have also been * passed the efi memmap, systab, etc., so we should use these data structures * for initialization. Note, the efi init code path is determined by the @@ -715,6 +899,10 @@ void __init setup_arch(char **cmdline_p) finish_e820_parsing(); + dmi_scan_machine(); + + dmi_check_system(bad_bios_dmi_table); + #ifdef CONFIG_X86_32 probe_roms(); #endif @@ -771,6 +959,10 @@ void __init setup_arch(char **cmdline_p) high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1; #endif +#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION + setup_bios_corruption_check(); +#endif + /* max_pfn_mapped is updated here */ max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT); max_pfn_mapped = max_low_pfn_mapped; @@ -799,8 +991,6 @@ void __init setup_arch(char **cmdline_p) vsmp_init(); #endif - dmi_scan_machine(); - io_delay_init(); /* @@ -903,3 +1093,5 @@ void __init setup_arch(char **cmdline_p) #endif #endif } + + diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index 07713d64debe..9abac8a9d823 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -95,7 +95,9 @@ int save_i387_xstate(void __user *buf) * Start with clearing the user buffer. This will present a * clean context for the bytes not touched by the fxsave/xsave. */ - __clear_user(buf, sig_xstate_size); + err = __clear_user(buf, sig_xstate_size); + if (err) + return err; if (task_thread_info(tsk)->status & TS_XSAVE) err = xsave_user(buf); @@ -114,6 +116,8 @@ int save_i387_xstate(void __user *buf) if (task_thread_info(tsk)->status & TS_XSAVE) { struct _fpstate __user *fx = buf; + struct _xstate __user *x = buf; + u64 xstate_bv; err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved, sizeof(struct _fpx_sw_bytes)); @@ -121,6 +125,31 @@ int save_i387_xstate(void __user *buf) err |= __put_user(FP_XSTATE_MAGIC2, (__u32 __user *) (buf + sig_xstate_size - FP_XSTATE_MAGIC2_SIZE)); + + /* + * Read the xstate_bv which we copied (directly from the cpu or + * from the state in task struct) to the user buffers and + * set the FP/SSE bits. + */ + err |= __get_user(xstate_bv, &x->xstate_hdr.xstate_bv); + + /* + * For legacy compatible, we always set FP/SSE bits in the bit + * vector while saving the state to the user context. This will + * enable us capturing any changes(during sigreturn) to + * the FP/SSE bits by the legacy applications which don't touch + * xstate_bv in the xsave header. + * + * xsave aware apps can change the xstate_bv in the xsave + * header as well as change any contents in the memory layout. + * xrestore as part of sigreturn will capture all the changes. + */ + xstate_bv |= XSTATE_FPSSE; + + err |= __put_user(xstate_bv, &x->xstate_hdr.xstate_bv); + + if (err) + return err; } return 1; @@ -272,7 +301,7 @@ void __cpuinit xsave_init(void) /* * setup the xstate image representing the init state */ -void setup_xstate_init(void) +static void __init setup_xstate_init(void) { init_xstate_buf = alloc_bootmem(xstate_size); init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT; diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index c3789bb19308..bbe044dbe014 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -31,6 +31,7 @@ #include <linux/cpumask.h> #include <asm/asm.h> +#include <asm/bios_ebda.h> #include <asm/processor.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -969,6 +970,8 @@ void __init mem_init(void) int codesize, reservedpages, datasize, initsize; int tmp; + start_periodic_check_for_corruption(); + #ifdef CONFIG_FLATMEM BUG_ON(!mem_map); #endif diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 83e13f2d53d2..3e10054c5731 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -31,6 +31,7 @@ #include <linux/nmi.h> #include <asm/processor.h> +#include <asm/bios_ebda.h> #include <asm/system.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -881,6 +882,8 @@ void __init mem_init(void) { long codesize, reservedpages, datasize, initsize; + start_periodic_check_for_corruption(); + pci_iommu_alloc(); /* clear_bss() already clear the empty_zero_page */ diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 10b52309aefd..8cbeda15cd29 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -24,18 +24,26 @@ #ifdef CONFIG_X86_64 -unsigned long __phys_addr(unsigned long x) +static inline int phys_addr_valid(unsigned long addr) { - if (x >= __START_KERNEL_map) - return x - __START_KERNEL_map + phys_base; - return x - PAGE_OFFSET; + return addr < (1UL << boot_cpu_data.x86_phys_bits); } -EXPORT_SYMBOL(__phys_addr); -static inline int phys_addr_valid(unsigned long addr) +unsigned long __phys_addr(unsigned long x) { - return addr < (1UL << boot_cpu_data.x86_phys_bits); + if (x >= __START_KERNEL_map) { + x -= __START_KERNEL_map; + VIRTUAL_BUG_ON(x >= KERNEL_IMAGE_SIZE); + x += phys_base; + } else { + VIRTUAL_BUG_ON(x < PAGE_OFFSET); + x -= PAGE_OFFSET; + VIRTUAL_BUG_ON(system_state == SYSTEM_BOOTING ? x > MAXMEM : + !phys_addr_valid(x)); + } + return x; } +EXPORT_SYMBOL(__phys_addr); #else @@ -44,6 +52,17 @@ static inline int phys_addr_valid(unsigned long addr) return 1; } +#ifdef CONFIG_DEBUG_VIRTUAL +unsigned long __phys_addr(unsigned long x) +{ + /* VMALLOC_* aren't constants; not available at the boot time */ + VIRTUAL_BUG_ON(x < PAGE_OFFSET || (system_state != SYSTEM_BOOTING && + is_vmalloc_addr((void *)x))); + return x - PAGE_OFFSET; +} +EXPORT_SYMBOL(__phys_addr); +#endif + #endif int page_is_ram(unsigned long pagenr) diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 5799298364fb..b697a13364ec 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -210,143 +210,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) /*-------------------------------------------------------------------------*/ -/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ - -/* Section 2.2 Host Controller Capability Registers */ -struct ehci_caps { - /* these fields are specified as 8 and 16 bit registers, - * but some hosts can't perform 8 or 16 bit PCI accesses. - */ - u32 hc_capbase; -#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ -#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ - u32 hcs_params; /* HCSPARAMS - offset 0x4 */ -#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ -#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ -#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ -#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ -#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ -#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ -#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ - - u32 hcc_params; /* HCCPARAMS - offset 0x8 */ -#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ -#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ -#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ -#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ -#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ -#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ - u8 portroute [8]; /* nibbles for routing - offset 0xC */ -} __attribute__ ((packed)); - - -/* Section 2.3 Host Controller Operational Registers */ -struct ehci_regs { - - /* USBCMD: offset 0x00 */ - u32 command; -/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ -#define CMD_PARK (1<<11) /* enable "park" on async qh */ -#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ -#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ -#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ -#define CMD_ASE (1<<5) /* async schedule enable */ -#define CMD_PSE (1<<4) /* periodic schedule enable */ -/* 3:2 is periodic frame list size */ -#define CMD_RESET (1<<1) /* reset HC not bus */ -#define CMD_RUN (1<<0) /* start/stop HC */ - - /* USBSTS: offset 0x04 */ - u32 status; -#define STS_ASS (1<<15) /* Async Schedule Status */ -#define STS_PSS (1<<14) /* Periodic Schedule Status */ -#define STS_RECL (1<<13) /* Reclamation */ -#define STS_HALT (1<<12) /* Not running (any reason) */ -/* some bits reserved */ - /* these STS_* flags are also intr_enable bits (USBINTR) */ -#define STS_IAA (1<<5) /* Interrupted on async advance */ -#define STS_FATAL (1<<4) /* such as some PCI access errors */ -#define STS_FLR (1<<3) /* frame list rolled over */ -#define STS_PCD (1<<2) /* port change detect */ -#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ -#define STS_INT (1<<0) /* "normal" completion (short, ...) */ - - /* USBINTR: offset 0x08 */ - u32 intr_enable; - - /* FRINDEX: offset 0x0C */ - u32 frame_index; /* current microframe number */ - /* CTRLDSSEGMENT: offset 0x10 */ - u32 segment; /* address bits 63:32 if needed */ - /* PERIODICLISTBASE: offset 0x14 */ - u32 frame_list; /* points to periodic list */ - /* ASYNCLISTADDR: offset 0x18 */ - u32 async_next; /* address of next async queue head */ - - u32 reserved [9]; - - /* CONFIGFLAG: offset 0x40 */ - u32 configured_flag; -#define FLAG_CF (1<<0) /* true: we'll support "high speed" */ - - /* PORTSC: offset 0x44 */ - u32 port_status [0]; /* up to N_PORTS */ -/* 31:23 reserved */ -#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ -#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ -#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ -/* 19:16 for port testing */ -#define PORT_LED_OFF (0<<14) -#define PORT_LED_AMBER (1<<14) -#define PORT_LED_GREEN (2<<14) -#define PORT_LED_MASK (3<<14) -#define PORT_OWNER (1<<13) /* true: companion hc owns this port */ -#define PORT_POWER (1<<12) /* true: has power (see PPC) */ -#define PORT_USB11(x) (((x)&(3<<10))==(1<<10)) /* USB 1.1 device */ -/* 11:10 for detecting lowspeed devices (reset vs release ownership) */ -/* 9 reserved */ -#define PORT_RESET (1<<8) /* reset port */ -#define PORT_SUSPEND (1<<7) /* suspend port */ -#define PORT_RESUME (1<<6) /* resume it */ -#define PORT_OCC (1<<5) /* over current change */ -#define PORT_OC (1<<4) /* over current active */ -#define PORT_PEC (1<<3) /* port enable change */ -#define PORT_PE (1<<2) /* port enable */ -#define PORT_CSC (1<<1) /* connect status change */ -#define PORT_CONNECT (1<<0) /* device connected */ -#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) -} __attribute__ ((packed)); - -#define USBMODE 0x68 /* USB Device mode */ -#define USBMODE_SDIS (1<<3) /* Stream disable */ -#define USBMODE_BE (1<<2) /* BE/LE endianness select */ -#define USBMODE_CM_HC (3<<0) /* host controller mode */ -#define USBMODE_CM_IDLE (0<<0) /* idle state */ - -/* Appendix C, Debug port ... intended for use with special "debug devices" - * that can help if there's no serial console. (nonstandard enumeration.) - */ -struct ehci_dbg_port { - u32 control; -#define DBGP_OWNER (1<<30) -#define DBGP_ENABLED (1<<28) -#define DBGP_DONE (1<<16) -#define DBGP_INUSE (1<<10) -#define DBGP_ERRCODE(x) (((x)>>7)&0x07) -# define DBGP_ERR_BAD 1 -# define DBGP_ERR_SIGNAL 2 -#define DBGP_ERROR (1<<6) -#define DBGP_GO (1<<5) -#define DBGP_OUT (1<<4) -#define DBGP_LEN(x) (((x)>>0)&0x0f) - u32 pids; -#define DBGP_PID_GET(x) (((x)>>16)&0xff) -#define DBGP_PID_SET(data,tok) (((data)<<8)|(tok)) - u32 data03; - u32 data47; - u32 address; -#define DBGP_EPADDR(dev,ep) (((dev)<<8)|(ep)) -} __attribute__ ((packed)); +#include <linux/usb/ehci_def.h> /*-------------------------------------------------------------------------*/ diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index d85a74c64b54..f79c2040758b 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -673,7 +673,6 @@ config FB_VESA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select VIDEO_SELECT help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. @@ -1578,7 +1577,6 @@ config FB_CYBLA tristate "Cyberblade/i1 support" depends on FB && PCI && X86_32 && !64BIT select FB_CFB_IMAGEBLIT - select VIDEO_SELECT ---help--- This driver is supposed to support the Trident Cyberblade/i1 graphics core integrated in the VIA VT8601A North Bridge, diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index 06f87b04f207..2f50a80b413e 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -43,22 +43,6 @@ config VGACON_SOFT_SCROLLBACK_SIZE buffer. Each 64KB will give you approximately 16 80x25 screenfuls of scrollback buffer -config VIDEO_SELECT - bool "Video mode selection support" - depends on X86 && VGA_CONSOLE - ---help--- - This enables support for text mode selection on kernel startup. If - you want to take advantage of some high-resolution text mode your - card's BIOS offers, but the traditional Linux utilities like - SVGATextMode don't, you can say Y here and set the mode using the - "vga=" option from your boot loader (lilo or loadlin) or set - "vga=ask" which brings up a video mode menu on kernel startup. (Try - "man bootparam" or see the documentation of your boot loader about - how to pass options to the kernel.) - - Read the file <file:Documentation/svga.txt> for more information - about the Video mode selection support. If unsure, say N. - config MDA_CONSOLE depends on !M68K && !PARISC && ISA tristate "MDA text console (dual-headed) (EXPERIMENTAL)" diff --git a/include/asm-x86/bios_ebda.h b/include/asm-x86/bios_ebda.h index ec42ed874591..79b4b88505d7 100644 --- a/include/asm-x86/bios_ebda.h +++ b/include/asm-x86/bios_ebda.h @@ -16,4 +16,21 @@ static inline unsigned int get_bios_ebda(void) void reserve_ebda_region(void); +#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION +/* + * This is obviously not a great place for this, but we want to be + * able to scatter it around anywhere in the kernel. + */ +void check_for_bios_corruption(void); +void start_periodic_check_for_corruption(void); +#else +static inline void check_for_bios_corruption(void) +{ +} + +static inline void start_periodic_check_for_corruption(void) +{ +} +#endif + #endif /* ASM_X86__BIOS_EBDA_H */ diff --git a/include/asm-x86/boot.h b/include/asm-x86/boot.h index 825de5dc867c..1d63bd5d5946 100644 --- a/include/asm-x86/boot.h +++ b/include/asm-x86/boot.h @@ -2,9 +2,7 @@ #define ASM_X86__BOOT_H /* Don't touch these, unless you really know what you're doing. */ -#define DEF_INITSEG 0x9000 #define DEF_SYSSEG 0x1000 -#define DEF_SETUPSEG 0x9020 #define DEF_SYSSIZE 0x7F00 /* Internal svga startup constants */ diff --git a/include/asm-x86/microcode.h b/include/asm-x86/microcode.h new file mode 100644 index 000000000000..62c793bb70ca --- /dev/null +++ b/include/asm-x86/microcode.h @@ -0,0 +1,47 @@ +#ifndef ASM_X86__MICROCODE_H +#define ASM_X86__MICROCODE_H + +struct cpu_signature { + unsigned int sig; + unsigned int pf; + unsigned int rev; +}; + +struct device; + +struct microcode_ops { + int (*request_microcode_user) (int cpu, const void __user *buf, size_t size); + int (*request_microcode_fw) (int cpu, struct device *device); + + void (*apply_microcode) (int cpu); + + int (*collect_cpu_info) (int cpu, struct cpu_signature *csig); + void (*microcode_fini_cpu) (int cpu); +}; + +struct ucode_cpu_info { + struct cpu_signature cpu_sig; + int valid; + void *mc; +}; +extern struct ucode_cpu_info ucode_cpu_info[]; + +#ifdef CONFIG_MICROCODE_INTEL +extern struct microcode_ops * __init init_intel_microcode(void); +#else +static inline struct microcode_ops * __init init_intel_microcode(void) +{ + return NULL; +} +#endif /* CONFIG_MICROCODE_INTEL */ + +#ifdef CONFIG_MICROCODE_AMD +extern struct microcode_ops * __init init_amd_microcode(void); +#else +static inline struct microcode_ops * __init init_amd_microcode(void) +{ + return NULL; +} +#endif + +#endif /* ASM_X86__MICROCODE_H */ diff --git a/include/asm-x86/mmzone_64.h b/include/asm-x86/mmzone_64.h index 626b03a14875..6480f3333b2a 100644 --- a/include/asm-x86/mmzone_64.h +++ b/include/asm-x86/mmzone_64.h @@ -7,7 +7,7 @@ #ifdef CONFIG_NUMA -#define VIRTUAL_BUG_ON(x) +#include <linux/mmdebug.h> #include <asm/smp.h> @@ -29,7 +29,6 @@ static inline __attribute__((pure)) int phys_to_nid(unsigned long addr) { unsigned nid; VIRTUAL_BUG_ON(!memnodemap); - VIRTUAL_BUG_ON((addr >> memnode_shift) >= memnodemapsize); nid = memnodemap[addr >> memnode_shift]; VIRTUAL_BUG_ON(nid >= MAX_NUMNODES || !node_data[nid]); return nid; diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h index 72f7305682c6..9c5a737a9af9 100644 --- a/include/asm-x86/page_32.h +++ b/include/asm-x86/page_32.h @@ -73,7 +73,12 @@ typedef struct page *pgtable_t; #endif #ifndef __ASSEMBLY__ +#define __phys_addr_const(x) ((x) - PAGE_OFFSET) +#ifdef CONFIG_DEBUG_VIRTUAL +extern unsigned long __phys_addr(unsigned long); +#else #define __phys_addr(x) ((x) - PAGE_OFFSET) +#endif #define __phys_reloc_hide(x) RELOC_HIDE((x), 0) #ifdef CONFIG_FLATMEM diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h index c7d35464a4bb..ee7cbb30773a 100644 --- a/include/asm-x86/processor.h +++ b/include/asm-x86/processor.h @@ -586,41 +586,6 @@ static inline void clear_in_cr4(unsigned long mask) write_cr4(cr4); } -struct microcode_header { - unsigned int hdrver; - unsigned int rev; - unsigned int date; - unsigned int sig; - unsigned int cksum; - unsigned int ldrver; - unsigned int pf; - unsigned int datasize; - unsigned int totalsize; - unsigned int reserved[3]; -}; - -struct microcode { - struct microcode_header hdr; - unsigned int bits[0]; -}; - -typedef struct microcode microcode_t; -typedef struct microcode_header microcode_header_t; - -/* microcode format is extended from prescott processors */ -struct extended_signature { - unsigned int sig; - unsigned int pf; - unsigned int cksum; -}; - -struct extended_sigtable { - unsigned int count; - unsigned int cksum; - unsigned int reserved[3]; - struct extended_signature sigs[0]; -}; - typedef struct { unsigned long seg; } mm_segment_t; diff --git a/include/linux/elf.h b/include/linux/elf.h index edc3dac3f02f..0b61ca41a044 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -360,6 +360,7 @@ typedef struct elf64_shdr { #define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */ #define NT_PPC_VSX 0x102 /* PowerPC VSX registers */ #define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */ +#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */ /* Note header in a PT_NOTE section */ diff --git a/include/linux/mm.h b/include/linux/mm.h index 4194bf8e4f6c..c61ba10768ea 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -7,6 +7,7 @@ #include <linux/gfp.h> #include <linux/list.h> +#include <linux/mmdebug.h> #include <linux/mmzone.h> #include <linux/rbtree.h> #include <linux/prio_tree.h> @@ -219,12 +220,6 @@ struct inode; */ #include <linux/page-flags.h> -#ifdef CONFIG_DEBUG_VM -#define VM_BUG_ON(cond) BUG_ON(cond) -#else -#define VM_BUG_ON(condition) do { } while(0) -#endif - /* * Methods to modify the page usage count. * diff --git a/include/linux/mmdebug.h b/include/linux/mmdebug.h new file mode 100644 index 000000000000..8a5509877192 --- /dev/null +++ b/include/linux/mmdebug.h @@ -0,0 +1,18 @@ +#ifndef LINUX_MM_DEBUG_H +#define LINUX_MM_DEBUG_H 1 + +#include <linux/autoconf.h> + +#ifdef CONFIG_DEBUG_VM +#define VM_BUG_ON(cond) BUG_ON(cond) +#else +#define VM_BUG_ON(cond) do { } while (0) +#endif + +#ifdef CONFIG_DEBUG_VIRTUAL +#define VIRTUAL_BUG_ON(cond) BUG_ON(cond) +#else +#define VIRTUAL_BUG_ON(cond) do { } while (0) +#endif + +#endif diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h new file mode 100644 index 000000000000..5b88e36c9103 --- /dev/null +++ b/include/linux/usb/ehci_def.h @@ -0,0 +1,160 @@ +/* + * Copyright (c) 2001-2002 by David Brownell + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_USB_EHCI_DEF_H +#define __LINUX_USB_EHCI_DEF_H + +/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ + +/* Section 2.2 Host Controller Capability Registers */ +struct ehci_caps { + /* these fields are specified as 8 and 16 bit registers, + * but some hosts can't perform 8 or 16 bit PCI accesses. + */ + u32 hc_capbase; +#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ +#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ + u32 hcs_params; /* HCSPARAMS - offset 0x4 */ +#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ +#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ +#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ +#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ +#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ +#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ +#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ + + u32 hcc_params; /* HCCPARAMS - offset 0x8 */ +#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ +#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ +#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ +#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ +#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ +#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ + u8 portroute [8]; /* nibbles for routing - offset 0xC */ +} __attribute__ ((packed)); + + +/* Section 2.3 Host Controller Operational Registers */ +struct ehci_regs { + + /* USBCMD: offset 0x00 */ + u32 command; +/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ +#define CMD_PARK (1<<11) /* enable "park" on async qh */ +#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ +#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ +#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ +#define CMD_ASE (1<<5) /* async schedule enable */ +#define CMD_PSE (1<<4) /* periodic schedule enable */ +/* 3:2 is periodic frame list size */ +#define CMD_RESET (1<<1) /* reset HC not bus */ +#define CMD_RUN (1<<0) /* start/stop HC */ + + /* USBSTS: offset 0x04 */ + u32 status; +#define STS_ASS (1<<15) /* Async Schedule Status */ +#define STS_PSS (1<<14) /* Periodic Schedule Status */ +#define STS_RECL (1<<13) /* Reclamation */ +#define STS_HALT (1<<12) /* Not running (any reason) */ +/* some bits reserved */ + /* these STS_* flags are also intr_enable bits (USBINTR) */ +#define STS_IAA (1<<5) /* Interrupted on async advance */ +#define STS_FATAL (1<<4) /* such as some PCI access errors */ +#define STS_FLR (1<<3) /* frame list rolled over */ +#define STS_PCD (1<<2) /* port change detect */ +#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ +#define STS_INT (1<<0) /* "normal" completion (short, ...) */ + + /* USBINTR: offset 0x08 */ + u32 intr_enable; + + /* FRINDEX: offset 0x0C */ + u32 frame_index; /* current microframe number */ + /* CTRLDSSEGMENT: offset 0x10 */ + u32 segment; /* address bits 63:32 if needed */ + /* PERIODICLISTBASE: offset 0x14 */ + u32 frame_list; /* points to periodic list */ + /* ASYNCLISTADDR: offset 0x18 */ + u32 async_next; /* address of next async queue head */ + + u32 reserved [9]; + + /* CONFIGFLAG: offset 0x40 */ + u32 configured_flag; +#define FLAG_CF (1<<0) /* true: we'll support "high speed" */ + + /* PORTSC: offset 0x44 */ + u32 port_status [0]; /* up to N_PORTS */ +/* 31:23 reserved */ +#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ +#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ +#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ +/* 19:16 for port testing */ +#define PORT_LED_OFF (0<<14) +#define PORT_LED_AMBER (1<<14) +#define PORT_LED_GREEN (2<<14) +#define PORT_LED_MASK (3<<14) +#define PORT_OWNER (1<<13) /* true: companion hc owns this port */ +#define PORT_POWER (1<<12) /* true: has power (see PPC) */ +#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */ +/* 11:10 for detecting lowspeed devices (reset vs release ownership) */ +/* 9 reserved */ +#define PORT_RESET (1<<8) /* reset port */ +#define PORT_SUSPEND (1<<7) /* suspend port */ +#define PORT_RESUME (1<<6) /* resume it */ +#define PORT_OCC (1<<5) /* over current change */ +#define PORT_OC (1<<4) /* over current active */ +#define PORT_PEC (1<<3) /* port enable change */ +#define PORT_PE (1<<2) /* port enable */ +#define PORT_CSC (1<<1) /* connect status change */ +#define PORT_CONNECT (1<<0) /* device connected */ +#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) +} __attribute__ ((packed)); + +#define USBMODE 0x68 /* USB Device mode */ +#define USBMODE_SDIS (1<<3) /* Stream disable */ +#define USBMODE_BE (1<<2) /* BE/LE endianness select */ +#define USBMODE_CM_HC (3<<0) /* host controller mode */ +#define USBMODE_CM_IDLE (0<<0) /* idle state */ + +/* Appendix C, Debug port ... intended for use with special "debug devices" + * that can help if there's no serial console. (nonstandard enumeration.) + */ +struct ehci_dbg_port { + u32 control; +#define DBGP_OWNER (1<<30) +#define DBGP_ENABLED (1<<28) +#define DBGP_DONE (1<<16) +#define DBGP_INUSE (1<<10) +#define DBGP_ERRCODE(x) (((x)>>7)&0x07) +# define DBGP_ERR_BAD 1 +# define DBGP_ERR_SIGNAL 2 +#define DBGP_ERROR (1<<6) +#define DBGP_GO (1<<5) +#define DBGP_OUT (1<<4) +#define DBGP_LEN(x) (((x)>>0)&0x0f) + u32 pids; +#define DBGP_PID_GET(x) (((x)>>16)&0xff) +#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok)) + u32 data03; + u32 data47; + u32 address; +#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) +} __attribute__ ((packed)); + +#endif /* __LINUX_USB_EHCI_DEF_H */ diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index ce697e0b319e..aa81d2848448 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -495,6 +495,15 @@ config DEBUG_VM If unsure, say N. +config DEBUG_VIRTUAL + bool "Debug VM translations" + depends on DEBUG_KERNEL && X86 + help + Enable some costly sanity checks in virtual to page code. This can + catch mistakes with virt_to_page() and friends. + + If unsure, say N. + config DEBUG_WRITECOUNT bool "Debug filesystem writers count" depends on DEBUG_KERNEL diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 85b9a0d2c877..bba06c41fc59 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -180,6 +180,13 @@ struct page *vmalloc_to_page(const void *vmalloc_addr) pmd_t *pmd; pte_t *ptep, pte; + /* + * XXX we might need to change this if we add VIRTUAL_BUG_ON for + * architectures that do not vmalloc module space + */ + VIRTUAL_BUG_ON(!is_vmalloc_addr(vmalloc_addr) && + !is_module_address(addr)); + if (!pgd_none(*pgd)) { pud = pud_offset(pgd, addr); if (!pud_none(*pud)) { diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index d64e6badc942..982dcae7bbe2 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -105,12 +105,12 @@ as-instr = $(call try-run,\ # Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586) cc-option = $(call try-run,\ - $(CC) $(KBUILD_CFLAGS) $(1) -S -xc /dev/null -o "$$TMP",$(1),$(2)) + $(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",$(1),$(2)) # cc-option-yn # Usage: flag := $(call cc-option-yn,-march=winchip-c6) cc-option-yn = $(call try-run,\ - $(CC) $(KBUILD_CFLAGS) $(1) -S -xc /dev/null -o "$$TMP",y,n) + $(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",y,n) # cc-option-align # Prefix align with either -falign or -malign |