diff options
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/i2c/busses/Makefile | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-core.h | 1 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-pcidrv.c | 316 |
4 files changed, 329 insertions, 0 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index e6f6e88021e5..1d7ce9c18bff 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -360,6 +360,16 @@ config I2C_DESIGNWARE_PLATFORM This driver can also be built as a module. If so, the module will be called i2c-designware-platform. +config I2C_DESIGNWARE_PCI + tristate "Synopsys DesignWare PCI" + depends on PCI + help + If you say yes to this option, support will be included for the + Synopsys DesignWare I2C adapter. Only master mode is supported. + + This driver can also be built as a module. If so, the module + will be called i2c-designware-pci. + config I2C_GPIO tristate "GPIO-based bitbanging I2C" depends on GENERIC_GPIO diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index d7fe55fb0776..fba6da60aa0e 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -35,6 +35,8 @@ obj-$(CONFIG_I2C_CPM) += i2c-cpm.o obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o +obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o +i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index dc016e2afe9c..601dd67a6c27 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -68,6 +68,7 @@ struct dw_i2c_dev { struct mutex lock; struct clk *clk; u32 (*get_clk_rate_khz) (struct dw_i2c_dev *dev); + struct dw_pci_controller *controller; int cmd_err; struct i2c_msg *msgs; int msgs_num; diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c new file mode 100644 index 000000000000..83307ef3b41f --- /dev/null +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -0,0 +1,316 @@ +/* + * Synopsys DesignWare I2C adapter driver (master only). + * + * Based on the TI DAVINCI I2C adapter driver. + * + * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2007 MontaVista Software Inc. + * Copyright (C) 2009 Provigent Ltd. + * Copyright (C) 2011 Intel corporation. + * + * ---------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include "i2c-designware-core.h" + +#define DRIVER_NAME "i2c-designware-pci" + +enum dw_pci_ctl_id_t { + moorestown_0, + moorestown_1, + moorestown_2, + + medfield_0, + medfield_1, + medfield_2, + medfield_3, + medfield_4, + medfield_5, +}; + +struct dw_pci_controller { + u32 bus_num; + u32 bus_cfg; + u32 tx_fifo_depth; + u32 rx_fifo_depth; + u32 clk_khz; +}; + +#define INTEL_MID_STD_CFG (DW_IC_CON_MASTER | \ + DW_IC_CON_SLAVE_DISABLE | \ + DW_IC_CON_RESTART_EN) + +static struct dw_pci_controller dw_pci_controllers[] = { + [moorestown_0] = { + .bus_num = 0, + .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, + .tx_fifo_depth = 32, + .rx_fifo_depth = 32, + .clk_khz = 25000, + }, + [moorestown_1] = { + .bus_num = 1, + .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, + .tx_fifo_depth = 32, + .rx_fifo_depth = 32, + .clk_khz = 25000, + }, + [moorestown_2] = { + .bus_num = 2, + .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, + .tx_fifo_depth = 32, + .rx_fifo_depth = 32, + .clk_khz = 25000, + }, + [medfield_0] = { + .bus_num = 0, + .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, + .tx_fifo_depth = 32, + .rx_fifo_depth = 32, + .clk_khz = 25000, + }, + [medfield_1] = { + .bus_num = 1, + .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, + .tx_fifo_depth = 32, + .rx_fifo_depth = 32, + .clk_khz = 25000, + }, + [medfield_2] = { + .bus_num = 2, + .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, + .tx_fifo_depth = 32, + .rx_fifo_depth = 32, + .clk_khz = 25000, + }, + [medfield_3] = { + .bus_num = 3, + .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_STD, + .tx_fifo_depth = 32, + .rx_fifo_depth = 32, + .clk_khz = 25000, + }, + [medfield_4] = { + .bus_num = 4, + .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, + .tx_fifo_depth = 32, + .rx_fifo_depth = 32, + .clk_khz = 25000, + }, + [medfield_5] = { + .bus_num = 5, + .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST, + .tx_fifo_depth = 32, + .rx_fifo_depth = 32, + .clk_khz = 25000, + }, +}; +static struct i2c_algorithm i2c_dw_algo = { + .master_xfer = i2c_dw_xfer, + .functionality = i2c_dw_func, +}; + +static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev) +{ + return dev->controller->clk_khz; +} + +static int __devinit i2c_dw_pci_probe(struct pci_dev *pdev, +const struct pci_device_id *id) +{ + struct dw_i2c_dev *dev; + struct i2c_adapter *adap; + unsigned long start, len; + void __iomem *base; + int r; + struct dw_pci_controller *controller; + + if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) { + printk(KERN_ERR "dw_i2c_pci_probe: invalid driver data %ld\n", + id->driver_data); + return -EINVAL; + } + + controller = &dw_pci_controllers[id->driver_data]; + + r = pci_enable_device(pdev); + if (r) { + dev_err(&pdev->dev, "Failed to enable I2C PCI device (%d)\n", + r); + goto exit; + } + + /* Determine the address of the I2C area */ + start = pci_resource_start(pdev, 0); + len = pci_resource_len(pdev, 0); + if (!start || len == 0) { + dev_err(&pdev->dev, "base address not set\n"); + r = -ENODEV; + goto exit; + } + + r = pci_request_region(pdev, 0, DRIVER_NAME); + if (r) { + dev_err(&pdev->dev, "failed to request I2C region " + "0x%lx-0x%lx\n", start, + (unsigned long)pci_resource_end(pdev, 0)); + goto exit; + } + + base = ioremap_nocache(start, len); + if (!base) { + dev_err(&pdev->dev, "I/O memory remapping failed\n"); + r = -ENOMEM; + goto err_release_region; + } + + + dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL); + if (!dev) { + r = -ENOMEM; + goto err_release_region; + } + + init_completion(&dev->cmd_complete); + mutex_init(&dev->lock); + dev->clk = NULL; + dev->controller = controller; + dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz; + dev->base = base; + dev->dev = get_device(&pdev->dev); + dev->functionality = + I2C_FUNC_I2C | + I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK; + dev->master_cfg = controller->bus_cfg; + + pci_set_drvdata(pdev, dev); + + dev->tx_fifo_depth = controller->tx_fifo_depth; + dev->rx_fifo_depth = controller->rx_fifo_depth; + r = i2c_dw_init(dev); + if (r) + goto err_iounmap; + + adap = &dev->adapter; + i2c_set_adapdata(adap, dev); + adap->owner = THIS_MODULE; + adap->class = 0; + adap->algo = &i2c_dw_algo; + adap->dev.parent = &pdev->dev; + adap->nr = controller->bus_num; + snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci-%d", + adap->nr); + + r = request_irq(pdev->irq, i2c_dw_isr, IRQF_SHARED, adap->name, dev); + if (r) { + dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq); + goto err_iounmap; + } + + i2c_dw_disable_int(dev); + i2c_dw_clear_int(dev); + r = i2c_add_numbered_adapter(adap); + if (r) { + dev_err(&pdev->dev, "failure adding adapter\n"); + goto err_free_irq; + } + + return 0; + +err_free_irq: + free_irq(pdev->irq, dev); +err_iounmap: + iounmap(dev->base); + pci_set_drvdata(pdev, NULL); + put_device(&pdev->dev); + kfree(dev); +err_release_region: + pci_release_region(pdev, 0); +exit: + return r; +} + +static void __devexit i2c_dw_pci_remove(struct pci_dev *pdev) +{ + struct dw_i2c_dev *dev = pci_get_drvdata(pdev); + + pci_set_drvdata(pdev, NULL); + i2c_del_adapter(&dev->adapter); + put_device(&pdev->dev); + + free_irq(dev->irq, dev); + kfree(dev); + pci_release_region(pdev, 0); +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("i2c_designware-pci"); + +DEFINE_PCI_DEVICE_TABLE(i2_designware_pci_ids) = { + /* Moorestown */ + { PCI_VDEVICE(INTEL, 0x0802), moorestown_0 }, + { PCI_VDEVICE(INTEL, 0x0803), moorestown_1 }, + { PCI_VDEVICE(INTEL, 0x0804), moorestown_2 }, + /* Medfield */ + { PCI_VDEVICE(INTEL, 0x0817), medfield_3,}, + { PCI_VDEVICE(INTEL, 0x0818), medfield_4 }, + { PCI_VDEVICE(INTEL, 0x0819), medfield_5 }, + { PCI_VDEVICE(INTEL, 0x082C), medfield_0 }, + { PCI_VDEVICE(INTEL, 0x082D), medfield_1 }, + { PCI_VDEVICE(INTEL, 0x082E), medfield_2 }, + { 0,} +}; +MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids); + +static struct pci_driver dw_i2c_driver = { + .name = DRIVER_NAME, + .id_table = i2_designware_pci_ids, + .probe = i2c_dw_pci_probe, + .remove = __devexit_p(i2c_dw_pci_remove), +}; + +static int __init dw_i2c_init_driver(void) +{ + return pci_register_driver(&dw_i2c_driver); +} +module_init(dw_i2c_init_driver); + +static void __exit dw_i2c_exit_driver(void) +{ + pci_unregister_driver(&dw_i2c_driver); +} +module_exit(dw_i2c_exit_driver); + +MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); +MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter"); +MODULE_LICENSE("GPL"); |