diff options
| -rw-r--r-- | arch/arm/mach-qcom/platsmp.c | 123 |
1 files changed, 123 insertions, 0 deletions
diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c index cb0783f3ed75..d6908569ecaf 100644 --- a/arch/arm/mach-qcom/platsmp.c +++ b/arch/arm/mach-qcom/platsmp.c @@ -34,7 +34,15 @@ #define L2DT_SLP BIT(3) #define CLAMP BIT(0) +#define APC_PWR_GATE_CTL 0x14 +#define BHS_CNT_SHIFT 24 +#define LDO_PWR_DWN_SHIFT 16 +#define LDO_BYP_SHIFT 8 +#define BHS_SEG_SHIFT 1 +#define BHS_EN BIT(0) + #define APCS_SAW2_VCTL 0x14 +#define APCS_SAW2_2_VCTL 0x1c extern void secondary_startup(void); @@ -160,6 +168,106 @@ out_acc: return ret; } +static int kpssv2_release_secondary(unsigned int cpu) +{ + void __iomem *reg; + struct device_node *cpu_node, *l2_node, *acc_node, *saw_node; + void __iomem *l2_saw_base; + unsigned reg_val; + int ret; + + cpu_node = of_get_cpu_node(cpu, NULL); + if (!cpu_node) + return -ENODEV; + + acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0); + if (!acc_node) { + ret = -ENODEV; + goto out_acc; + } + + l2_node = of_parse_phandle(cpu_node, "next-level-cache", 0); + if (!l2_node) { + ret = -ENODEV; + goto out_l2; + } + + saw_node = of_parse_phandle(l2_node, "qcom,saw", 0); + if (!saw_node) { + ret = -ENODEV; + goto out_saw; + } + + reg = of_iomap(acc_node, 0); + if (!reg) { + ret = -ENOMEM; + goto out_map; + } + + l2_saw_base = of_iomap(saw_node, 0); + if (!l2_saw_base) { + ret = -ENOMEM; + goto out_saw_map; + } + + /* Turn on the BHS, turn off LDO Bypass and power down LDO */ + reg_val = (64 << BHS_CNT_SHIFT) | (0x3f << LDO_PWR_DWN_SHIFT) | BHS_EN; + writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL); + mb(); + /* wait for the BHS to settle */ + udelay(1); + + /* Turn on BHS segments */ + reg_val |= 0x3f << BHS_SEG_SHIFT; + writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL); + mb(); + /* wait for the BHS to settle */ + udelay(1); + + /* Finally turn on the bypass so that BHS supplies power */ + reg_val |= 0x3f << LDO_BYP_SHIFT; + writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL); + + /* enable max phases */ + writel_relaxed(0x10003, l2_saw_base + APCS_SAW2_2_VCTL); + mb(); + udelay(50); + + reg_val = COREPOR_RST | CLAMP; + writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL); + mb(); + udelay(2); + + reg_val &= ~CLAMP; + writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL); + mb(); + udelay(2); + + reg_val &= ~COREPOR_RST; + writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL); + mb(); + + reg_val |= CORE_PWRD_UP; + writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL); + mb(); + + ret = 0; + + iounmap(l2_saw_base); +out_saw_map: + iounmap(reg); +out_map: + of_node_put(saw_node); +out_saw: + of_node_put(l2_node); +out_l2: + of_node_put(acc_node); +out_acc: + of_node_put(cpu_node); + + return ret; +} + static DEFINE_PER_CPU(int, cold_boot_done); static int qcom_boot_secondary(unsigned int cpu, int (*func)(unsigned int)) @@ -204,6 +312,11 @@ static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle) return qcom_boot_secondary(cpu, kpssv1_release_secondary); } +static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + return qcom_boot_secondary(cpu, kpssv2_release_secondary); +} + static void __init qcom_smp_prepare_cpus(unsigned int max_cpus) { int cpu, map; @@ -253,3 +366,13 @@ static struct smp_operations qcom_smp_kpssv1_ops __initdata = { #endif }; CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops); + +static struct smp_operations qcom_smp_kpssv2_ops __initdata = { + .smp_prepare_cpus = qcom_smp_prepare_cpus, + .smp_secondary_init = qcom_secondary_init, + .smp_boot_secondary = kpssv2_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = qcom_cpu_die, +#endif +}; +CPU_METHOD_OF_DECLARE(qcom_smp_kpssv2, "qcom,kpss-acc-v2", &qcom_smp_kpssv2_ops); |