diff options
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/act8865-regulator.txt | 60 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt | 2 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/vendor-prefixes.txt | 1 | ||||
| -rw-r--r-- | drivers/regulator/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
| -rw-r--r-- | drivers/regulator/ab8500.c | 126 | ||||
| -rw-r--r-- | drivers/regulator/act8865-regulator.c | 349 | ||||
| -rw-r--r-- | drivers/regulator/anatop-regulator.c | 36 | ||||
| -rw-r--r-- | drivers/regulator/arizona-micsupp.c | 52 | ||||
| -rw-r--r-- | drivers/regulator/as3722-regulator.c | 34 | ||||
| -rw-r--r-- | drivers/regulator/pfuze100-regulator.c | 2 | ||||
| -rw-r--r-- | include/linux/mfd/as3722.h | 4 | ||||
| -rw-r--r-- | include/linux/regulator/act8865.h | 53 |
13 files changed, 537 insertions, 191 deletions
diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt new file mode 100644 index 000000000000..bef1fbb647ca --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt @@ -0,0 +1,60 @@ +ACT8865 regulator +------------------- + +Required properties: +- compatible: "active-semi,act8865" +- reg: I2C slave address + +Any standard regulator properties can be used to configure the single regulator. + +The valid names for regulators are: + DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4. + +Example: +-------- + + i2c1: i2c@f0018000 { + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "disabled"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-suspend-mem-microvolt = <1150000>; + regulator-suspend-standby-microvolt = <1150000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddana_reg: LDO_REG1 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG2 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt index d1660a90fc06..fc6b38f035bd 100644 --- a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt @@ -83,7 +83,7 @@ as per the datasheet of s5m8767. - LDOn - valid values for n are 1 to 28 - - Example: LDO0, LD01, LDO28 + - Example: LDO1, LD02, LDO28 - BUCKn - valid values for n are 1 to 9. - Example: BUCK1, BUCK2, BUCK9 diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index edbb8d88c85e..519421f28691 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -3,6 +3,7 @@ Device tree binding vendor prefix registry. Keep list in alphabetical order. This isn't an exhaustive list, but you should add new prefixes to it before using them to avoid name-space collisions. +active-semi Active-Semi International Inc ad Avionic Design GmbH adi Analog Devices, Inc. aeroflexgaisler Aeroflex Gaisler AB diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index ce785f481281..63bc1bab37e3 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -70,6 +70,14 @@ config REGULATOR_88PM8607 help This driver supports 88PM8607 voltage regulator chips. +config REGULATOR_ACT8865 + tristate "Active-semi act8865 voltage regulator" + depends on I2C + select REGMAP_I2C + help + This driver controls a active-semi act8865 voltage output + regulator via I2C bus. + config REGULATOR_AD5398 tristate "Analog Devices AD5398/AD5821 regulators" depends on I2C diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 01c597ea1744..3bb3a5591b95 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o +obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index 603f192e84f1..c625468c7f2c 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -2998,37 +2998,6 @@ static void abx500_get_regulator_info(struct ab8500 *ab8500) } } -static int ab8500_regulator_init_registers(struct platform_device *pdev, - int id, int mask, int value) -{ - struct ab8500_reg_init *reg_init = abx500_regulator.init; - int err; - - BUG_ON(value & ~mask); - BUG_ON(mask & ~reg_init[id].mask); - - /* initialize register */ - err = abx500_mask_and_set_register_interruptible( - &pdev->dev, - reg_init[id].bank, - reg_init[id].addr, - mask, value); - if (err < 0) { - dev_err(&pdev->dev, - "Failed to initialize 0x%02x, 0x%02x.\n", - reg_init[id].bank, - reg_init[id].addr); - return err; - } - dev_vdbg(&pdev->dev, - " init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n", - reg_init[id].bank, - reg_init[id].addr, - mask, value); - - return 0; -} - static int ab8500_regulator_register(struct platform_device *pdev, struct regulator_init_data *init_data, int id, struct device_node *np) @@ -3036,7 +3005,6 @@ static int ab8500_regulator_register(struct platform_device *pdev, struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); struct ab8500_regulator_info *info = NULL; struct regulator_config config = { }; - int err; /* assign per-regulator data */ info = &abx500_regulator.info[id]; @@ -3058,17 +3026,12 @@ static int ab8500_regulator_register(struct platform_device *pdev, } /* register regulator with framework */ - info->regulator = regulator_register(&info->desc, &config); + info->regulator = devm_regulator_register(&pdev->dev, &info->desc, + &config); if (IS_ERR(info->regulator)) { - err = PTR_ERR(info->regulator); dev_err(&pdev->dev, "failed to register regulator %s\n", info->desc.name); - /* when we fail, un-register all earlier regulators */ - while (--id >= 0) { - info = &abx500_regulator.info[id]; - regulator_unregister(info->regulator); - } - return err; + return PTR_ERR(info->regulator); } return 0; @@ -3095,9 +3058,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev) { struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); struct device_node *np = pdev->dev.of_node; - struct ab8500_platform_data *ppdata; - struct ab8500_regulator_platform_data *pdata; - int i, err; + int err; if (!ab8500) { dev_err(&pdev->dev, "null mfd parent\n"); @@ -3106,83 +3067,20 @@ static int ab8500_regulator_probe(struct platform_device *pdev) abx500_get_regulator_info(ab8500); - if (np) { - err = of_regulator_match(&pdev->dev, np, - abx500_regulator.match, - abx500_regulator.match_size); - if (err < 0) { - dev_err(&pdev->dev, - "Error parsing regulator init data: %d\n", err); - return err; - } - - err = ab8500_regulator_of_probe(pdev, np); - return err; - } - - ppdata = dev_get_platdata(ab8500->dev); - if (!ppdata) { - dev_err(&pdev->dev, "null parent pdata\n"); - return -EINVAL; - } - - pdata = ppdata->regulator; - if (!pdata) { - dev_err(&pdev->dev, "null pdata\n"); - return -EINVAL; - } - - /* make sure the platform data has the correct size */ - if (pdata->num_regulator != abx500_regulator.info_size) { - dev_err(&pdev->dev, "Configuration error: size mismatch.\n"); - return -EINVAL; - } - - /* initialize debug (initial state is recorded with this call) */ - err = ab8500_regulator_debug_init(pdev); - if (err) + err = of_regulator_match(&pdev->dev, np, + abx500_regulator.match, + abx500_regulator.match_size); + if (err < 0) { + dev_err(&pdev->dev, + "Error parsing regulator init data: %d\n", err); return err; - - /* initialize registers */ - for (i = 0; i < pdata->num_reg_init; i++) { - int id, mask, value; - - id = pdata->reg_init[i].id; - mask = pdata->reg_init[i].mask; - value = pdata->reg_init[i].value; - - /* check for configuration errors */ - BUG_ON(id >= abx500_regulator.init_size); - - err = ab8500_regulator_init_registers(pdev, id, mask, value); - if (err < 0) - return err; } - - /* register all regulators */ - for (i = 0; i < abx500_regulator.info_size; i++) { - err = ab8500_regulator_register(pdev, &pdata->regulator[i], - i, NULL); - if (err < 0) - return err; - } - - return 0; + return ab8500_regulator_of_probe(pdev, np); } static int ab8500_regulator_remove(struct platform_device *pdev) { - int i, err; - - for (i = 0; i < abx500_regulator.info_size; i++) { - struct ab8500_regulator_info *info = NULL; - info = &abx500_regulator.info[i]; - - dev_vdbg(rdev_get_dev(info->regulator), - "%s-remove\n", info->desc.name); - - regulator_unregister(info->regulator); - } + int err; /* remove regulator debug */ err = ab8500_regulator_debug_exit(pdev); diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c new file mode 100644 index 000000000000..084cc0819a52 --- /dev/null +++ b/drivers/regulator/act8865-regulator.c @@ -0,0 +1,349 @@ +/* + * act8865-regulator.c - Voltage regulation for the active-semi ACT8865 + * http://www.active-semi.com/sheets/ACT8865_Datasheet.pdf + * + * Copyright (C) 2013 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/act8865.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regulator/of_regulator.h> +#include <linux/regmap.h> + +/* + * ACT8865 Global Register Map. + */ +#define ACT8865_SYS_MODE 0x00 +#define ACT8865_SYS_CTRL 0x01 +#define ACT8865_DCDC1_VSET1 0x20 +#define ACT8865_DCDC1_VSET2 0x21 +#define ACT8865_DCDC1_CTRL 0x22 +#define ACT8865_DCDC2_VSET1 0x30 +#define ACT8865_DCDC2_VSET2 0x31 +#define ACT8865_DCDC2_CTRL 0x32 +#define ACT8865_DCDC3_VSET1 0x40 +#define ACT8865_DCDC3_VSET2 0x41 +#define ACT8865_DCDC3_CTRL 0x42 +#define ACT8865_LDO1_VSET 0x50 +#define ACT8865_LDO1_CTRL 0x51 +#define ACT8865_LDO2_VSET 0x54 +#define ACT8865_LDO2_CTRL 0x55 +#define ACT8865_LDO3_VSET 0x60 +#define ACT8865_LDO3_CTRL 0x61 +#define ACT8865_LDO4_VSET 0x64 +#define ACT8865_LDO4_CTRL 0x65 + +/* + * Field Definitions. + */ +#define ACT8865_ENA 0x80 /* ON - [7] */ +#define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */ + +/* + * ACT8865 voltage number + */ +#define ACT8865_VOLTAGE_NUM 64 + +struct act8865 { + struct regulator_dev *rdev[ACT8865_REG_NUM]; + struct regmap *regmap; +}; + +static const struct regmap_config act8865_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static const struct regulator_linear_range act8865_volatge_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000), + REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000), + REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000), +}; + +static struct regulator_ops act8865_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_desc act8865_reg[] = { + { + .name = "DCDC_REG1", + .id = ACT8865_ID_DCDC1, + .ops = &act8865_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = ACT8865_VOLTAGE_NUM, + .linear_ranges = act8865_volatge_ranges, + .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges), + .vsel_reg = ACT8865_DCDC1_VSET1, + .vsel_mask = ACT8865_VSEL_MASK, + .enable_reg = ACT8865_DCDC1_CTRL, + .enable_mask = ACT8865_ENA, + .owner = THIS_MODULE, + }, + { + .name = "DCDC_REG2", + .id = ACT8865_ID_DCDC2, + .ops = &act8865_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = ACT8865_VOLTAGE_NUM, + .linear_ranges = act8865_volatge_ranges, + .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges), + .vsel_reg = ACT8865_DCDC2_VSET1, + .vsel_mask = ACT8865_VSEL_MASK, + .enable_reg = ACT8865_DCDC2_CTRL, + .enable_mask = ACT8865_ENA, + .owner = THIS_MODULE, + }, + { + .name = "DCDC_REG3", + .id = ACT8865_ID_DCDC3, + .ops = &act8865_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = ACT8865_VOLTAGE_NUM, + .linear_ranges = act8865_volatge_ranges, + .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges), + .vsel_reg = ACT8865_DCDC3_VSET1, + .vsel_mask = ACT8865_VSEL_MASK, + .enable_reg = ACT8865_DCDC3_CTRL, + .enable_mask = ACT8865_ENA, + .owner = THIS_MODULE, + }, + { + .name = "LDO_REG1", + .id = ACT8865_ID_LDO1, + .ops = &act8865_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = ACT8865_VOLTAGE_NUM, + .linear_ranges = act8865_volatge_ranges, + .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges), + .vsel_reg = ACT8865_LDO1_VSET, + .vsel_mask = ACT8865_VSEL_MASK, + .enable_reg = ACT8865_LDO1_CTRL, + .enable_mask = ACT8865_ENA, + .owner = THIS_MODULE, + }, + { + .name = "LDO_REG2", + .id = ACT8865_ID_LDO2, + .ops = &act8865_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = ACT8865_VOLTAGE_NUM, + .linear_ranges = act8865_volatge_ranges, + .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges), + .vsel_reg = ACT8865_LDO2_VSET, + .vsel_mask = ACT8865_VSEL_MASK, + .enable_reg = ACT8865_LDO2_CTRL, + .enable_mask = ACT8865_ENA, + .owner = THIS_MODULE, + }, + { + .name = "LDO_REG3", + .id = ACT8865_ID_LDO3, + .ops = &act8865_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = ACT8865_VOLTAGE_NUM, + .linear_ranges = act8865_volatge_ranges, + .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges), + .vsel_reg = ACT8865_LDO3_VSET, + .vsel_mask = ACT8865_VSEL_MASK, + .enable_reg = ACT8865_LDO3_CTRL, + .enable_mask = ACT8865_ENA, + .owner = THIS_MODULE, + }, + { + .name = "LDO_REG4", + .id = ACT8865_ID_LDO4, + .ops = &act8865_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = ACT8865_VOLTAGE_NUM, + .linear_ranges = act8865_volatge_ranges, + .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges), + .vsel_reg = ACT8865_LDO4_VSET, + .vsel_mask = ACT8865_VSEL_MASK, + .enable_reg = ACT8865_LDO4_CTRL, + .enable_mask = ACT8865_ENA, + .owner = THIS_MODULE, + }, +}; + +#ifdef CONFIG_OF +static const struct of_device_id act8865_dt_ids[] = { + { .compatible = "active-semi,act8865" }, + { } +}; +MODULE_DEVICE_TABLE(of, act8865_dt_ids); + +static struct of_regulator_match act8865_matches[] = { + [ACT8865_ID_DCDC1] = { .name = "DCDC_REG1"}, + [ACT8865_ID_DCDC2] = { .name = "DCDC_REG2"}, + [ACT8865_ID_DCDC3] = { .name = "DCDC_REG3"}, + [ACT8865_ID_LDO1] = { .name = "LDO_REG1"}, + [ACT8865_ID_LDO2] = { .name = "LDO_REG2"}, + [ACT8865_ID_LDO3] = { .name = "LDO_REG3"}, + [ACT8865_ID_LDO4] = { .name = "LDO_REG4"}, +}; + +static int act8865_pdata_from_dt(struct device *dev, + struct device_node **of_node, + struct act8865_platform_data *pdata) +{ + int matched, i; + struct device_node *np; + struct act8865_regulator_data *regulator; + + np = of_find_node_by_name(dev->of_node, "regulators"); + if (!np) { + dev_err(dev, "missing 'regulators' subnode in DT\n"); + return -EINVAL; + } + + matched = of_regulator_match(dev, np, + act8865_matches, ARRAY_SIZE(act8865_matches)); + if (matched <= 0) + return matched; + + pdata->regulators = devm_kzalloc(dev, + sizeof(struct act8865_regulator_data) * + ARRAY_SIZE(act8865_matches), GFP_KERNEL); + if (!pdata->regulators) { + dev_err(dev, "%s: failed to allocate act8865 registor\n", + __func__); + return -ENOMEM; + } + + pdata->num_regulators = matched; + regulator = pdata->regulators; + + for (i = 0; i < ARRAY_SIZE(act8865_matches); i++) { + regulator->id = i; + regulator->name = act8865_matches[i].name; + regulator->platform_data = act8865_matches[i].init_data; + of_node[i] = act8865_matches[i].of_node; + regulator++; + } + + return 0; +} +#else +static inline int act8865_pdata_from_dt(struct device *dev, + struct device_node **of_node, + struct act8865_platform_data *pdata) +{ + return 0; +} +#endif + +static int act8865_pmic_probe(struct i2c_client *client, + const struct i2c_device_id *i2c_id) +{ + struct regulator_dev **rdev; + struct device *dev = &client->dev; + struct act8865_platform_data *pdata = dev_get_platdata(dev); + struct regulator_config config = { }; + struct act8865 *act8865; + struct device_node *of_node[ACT8865_REG_NUM]; + int i, id; + int ret = -EINVAL; + int error; + + if (dev->of_node && !pdata) { + const struct of_device_id *id; + struct act8865_platform_data pdata_of; + + id = of_match_device(of_match_ptr(act8865_dt_ids), dev); + if (!id) + return -ENODEV; + + ret = act8865_pdata_from_dt(dev, of_node, &pdata_of); + if (ret < 0) + return ret; + + pdata = &pdata_of; + } + + if (pdata->num_regulators > ACT8865_REG_NUM) { + dev_err(dev, "Too many regulators found!\n"); + return -EINVAL; + } + + act8865 = devm_kzalloc(dev, sizeof(struct act8865), GFP_KERNEL); + if (!act8865) + return -ENOMEM; + + rdev = act8865->rdev; + + act8865->regmap = devm_regmap_init_i2c(client, &act8865_regmap_config); + if (IS_ERR(act8865->regmap)) { + error = PTR_ERR(act8865->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + error); + return error; + } + + /* Finally register devices */ + for (i = 0; i < ACT8865_REG_NUM; i++) { + + id = pdata->regulators[i].id; + + config.dev = dev; + config.init_data = pdata->regulators[i].platform_data; + config.of_node = of_node[i]; + config.driver_data = act8865; + config.regmap = act8865->regmap; + + rdev[i] = devm_regulator_register(&client->dev, + &act8865_reg[i], &config); + if (IS_ERR(rdev[i])) { + dev_err(dev, "failed to register %s\n", + act8865_reg[id].name); + return PTR_ERR(rdev[i]); + } + } + + i2c_set_clientdata(client, act8865); + + return 0; +} + +static const struct i2c_device_id act8865_ids[] = { + { "act8865", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, act8865_ids); + +static struct i2c_driver act8865_pmic_driver = { + .driver = { + .name = "act8865", + .owner = THIS_MODULE, + }, + .probe = act8865_pmic_probe, + .id_table = act8865_ids, +}; + +module_i2c_driver(act8865_pmic_driver); + +MODULE_DESCRIPTION("active-semi act8865 voltage regulator driver"); +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index c734d0980826..862e63e451d0 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -122,10 +122,8 @@ static int anatop_regulator_probe(struct platform_device *pdev) if (!sreg) return -ENOMEM; sreg->initdata = initdata; - sreg->name = kstrdup(of_get_property(np, "regulator-name", NULL), - GFP_KERNEL); + sreg->name = of_get_property(np, "regulator-name", NULL); rdesc = &sreg->rdesc; - memset(rdesc, 0, sizeof(*rdesc)); rdesc->name = sreg->name; rdesc->ops = &anatop_rops; rdesc->type = REGULATOR_VOLTAGE; @@ -143,37 +141,37 @@ static int anatop_regulator_probe(struct platform_device *pdev) &sreg->control_reg); if (ret) { dev_err(dev, "no anatop-reg-offset property set\n"); - goto anatop_probe_end; + return ret; } ret = of_property_read_u32(np, "anatop-vol-bit-width", &sreg->vol_bit_width); if (ret) { dev_err(dev, "no anatop-vol-bit-width property set\n"); - goto anatop_probe_end; + return ret; } ret = of_property_read_u32(np, "anatop-vol-bit-shift", &sreg->vol_bit_shift); if (ret) { dev_err(dev, "no anatop-vol-bit-shift property set\n"); - goto anatop_probe_end; + return ret; } ret = of_property_read_u32(np, "anatop-min-bit-val", &sreg->min_bit_val); if (ret) { dev_err(dev, "no anatop-min-bit-val property set\n"); - goto anatop_probe_end; + return ret; } ret = of_property_read_u32(np, "anatop-min-voltage", &sreg->min_voltage); if (ret) { dev_err(dev, "no anatop-min-voltage property set\n"); - goto anatop_probe_end; + return ret; } ret = of_property_read_u32(np, "anatop-max-voltage", &sreg->max_voltage); if (ret) { dev_err(dev, "no anatop-max-voltage property set\n"); - goto anatop_probe_end; + return ret; } /* read LDO ramp up setting, only for core reg */ @@ -204,27 +202,11 @@ static int anatop_regulator_probe(struct platform_device *pdev) if (IS_ERR(rdev)) { dev_err(dev, "failed to register %s\n", rdesc->name); - ret = PTR_ERR(rdev); - goto anatop_probe_end; + return PTR_ERR(rdev); } platform_set_drvdata(pdev, rdev); -anatop_probe_end: - if (ret) - kfree(sreg->name); - - return ret; -} - -static int anatop_regulator_remove(struct platform_device *pdev) -{ - struct regulator_dev *rdev = platform_get_drvdata(pdev); - struct anatop_regulator *sreg = rdev_get_drvdata(rdev); - const char *name = sreg->name; - - kfree(name); - return 0; } @@ -240,7 +222,6 @@ static struct platform_driver anatop_regulator_driver = { .of_match_table = of_anatop_regulator_match_tbl, }, .probe = anatop_regulator_probe, - .remove = anatop_regulator_remove, }; static int __init anatop_regulator_init(void) @@ -259,3 +240,4 @@ MODULE_AUTHOR("Nancy Chen <Nancy.Chen@freescale.com>"); MODULE_AUTHOR("Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>"); MODULE_DESCRIPTION("ANATOP Regulator driver"); MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:anatop_regulator"); diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index fd3154d86901..034ece707083 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -28,8 +28,6 @@ #include <linux/mfd/arizona/pdata.h> #include <linux/mfd/arizona/registers.h> -#define ARIZONA_MICSUPP_MAX_SELECTOR 0x1f - struct arizona_micsupp { struct regulator_dev *regulator; struct arizona *arizona; @@ -40,42 +38,6 @@ struct arizona_micsupp { struct work_struct check_cp_work; }; -static int arizona_micsupp_list_voltage(struct regulator_dev *rdev, - unsigned int selector) -{ - if (selector > ARIZONA_MICSUPP_MAX_SELECTOR) - return -EINVAL; - - if (selector == ARIZONA_MICSUPP_MAX_SELECTOR) - return 3300000; - else - return (selector * 50000) + 1700000; -} - -static int arizona_micsupp_map_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV) -{ - unsigned int voltage; - int selector; - - if (min_uV < 1700000) - min_uV = 1700000; - - if (min_uV > 3200000) - selector = ARIZONA_MICSUPP_MAX_SELECTOR; - else - selector = DIV_ROUND_UP(min_uV - 1700000, 50000); - - if (selector < 0) - return -EINVAL; - - voltage = arizona_micsupp_list_voltage(rdev, selector); - if (voltage < min_uV || voltage > max_uV) - return -EINVAL; - - return selector; -} - static void arizona_micsupp_check_cp(struct work_struct *work) { struct arizona_micsupp *micsupp = @@ -145,8 +107,8 @@ static struct regulator_ops arizona_micsupp_ops = { .disable = arizona_micsupp_disable, .is_enabled = regulator_is_enabled_regmap, - .list_voltage = arizona_micsupp_list_voltage, - .map_voltage = arizona_micsupp_map_voltage, + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, @@ -155,11 +117,16 @@ static struct regulator_ops arizona_micsupp_ops = { .set_bypass = arizona_micsupp_set_bypass, }; +static const struct regulator_linear_range arizona_micsupp_ranges[] = { + REGULATOR_LINEAR_RANGE(1700000, 0, 0x1e, 50000), + REGULATOR_LINEAR_RANGE(3300000, 0x1f, 0x1f, 0), +}; + static const struct regulator_desc arizona_micsupp = { .name = "MICVDD", .supply_name = "CPVDD", .type = REGULATOR_VOLTAGE, - .n_voltages = ARIZONA_MICSUPP_MAX_SELECTOR + 1, + .n_voltages = 32, .ops = &arizona_micsupp_ops, .vsel_reg = ARIZONA_LDO2_CONTROL_1, @@ -169,6 +136,9 @@ static const struct regulator_desc arizona_micsupp = { .bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1, .bypass_mask = ARIZONA_CPMIC_BYPASS, + .linear_ranges = arizona_micsupp_ranges, + .n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ranges), + .enable_time = 3000, .owner = THIS_MODULE, diff --git a/drivers/regulator/as3722-regulator.c b/drivers/regulator/as3722-regulator.c index b9f1d24c6812..8b17d786cb71 100644 --- a/drivers/regulator/as3722-regulator.c +++ b/drivers/regulator/as3722-regulator.c @@ -99,7 +99,6 @@ static const struct as3722_register_mapping as3722_reg_lookup[] = { .sleep_ctrl_mask = AS3722_SD0_EXT_ENABLE_MASK, .control_reg = AS3722_SD0_CONTROL_REG, .mode_mask = AS3722_SD0_MODE_FAST, - .n_voltages = AS3722_SD0_VSEL_MAX + 1, }, { .regulator_id = AS3722_REGULATOR_ID_SD1, @@ -112,7 +111,6 @@ static const struct as3722_register_mapping as3722_reg_lookup[] = { .sleep_ctrl_mask = AS3722_SD1_EXT_ENABLE_MASK, .control_reg = AS3722_SD1_CONTROL_REG, .mode_mask = AS3722_SD1_MODE_FAST, - .n_voltages = AS3722_SD0_VSEL_MAX + 1, }, { .regulator_id = AS3722_REGULATOR_ID_SD2, @@ -181,7 +179,6 @@ static const struct as3722_register_mapping as3722_reg_lookup[] = { .sleep_ctrl_mask = AS3722_SD6_EXT_ENABLE_MASK, .control_reg = AS3722_SD6_CONTROL_REG, .mode_mask = AS3722_SD6_MODE_FAST, - .n_voltages = AS3722_SD0_VSEL_MAX + 1, }, { .regulator_id = AS3722_REGULATOR_ID_LDO0, @@ -595,6 +592,22 @@ static int as3722_sd016_set_current_limit(struct regulator_dev *rdev, return as3722_update_bits(as3722, reg, mask, val); } +static bool as3722_sd0_is_low_voltage(struct as3722_regulators *as3722_regs) +{ + int err; + unsigned val; + + err = as3722_read(as3722_regs->as3722, AS3722_FUSE7_REG, &val); + if (err < 0) { + dev_err(as3722_regs->dev, "Reg 0x%02x read failed: %d\n", + AS3722_FUSE7_REG, err); + return false; + } + if (val & AS3722_FUSE7_SD0_LOW_VOLTAGE) + return true; + return false; +} + static const struct regulator_linear_range as3722_sd2345_ranges[] = { REGULATOR_LINEAR_RANGE(612500, 0x01, 0x40, 12500), REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000), @@ -820,9 +833,19 @@ static int as3722_regulator_probe(struct platform_device *pdev) ops = &as3722_sd016_extcntrl_ops; else ops = &as3722_sd016_ops; - as3722_regs->desc[id].min_uV = 610000; + if (id == AS3722_REGULATOR_ID_SD0 && + as3722_sd0_is_low_voltage(as3722_regs)) { + as3722_regs->desc[id].n_voltages = + AS3722_SD0_VSEL_LOW_VOL_MAX + 1; + as3722_regs->desc[id].min_uV = 410000; + } else { + as3722_regs->desc[id].n_voltages = + AS3722_SD0_VSEL_MAX + 1, + as3722_regs->desc[id].min_uV = 610000; + } as3722_regs->desc[id].uV_step = 10000; as3722_regs->desc[id].linear_min_sel = 1; + as3722_regs->desc[id].enable_time = 600; break; case AS3722_REGULATOR_ID_SD2: case AS3722_REGULATOR_ID_SD3: @@ -842,9 +865,6 @@ static int as3722_regulator_probe(struct platform_device *pdev) ops = &as3722_ldo_extcntrl_ops; else ops = &as3722_ldo_ops; - as3722_regs->desc[id].min_uV = 825000; - as3722_regs->desc[id].uV_step = 25000; - as3722_regs->desc[id].linear_min_sel = 1; as3722_regs->desc[id].enable_time = 500; as3722_regs->desc[id].linear_ranges = as3722_ldo_ranges; as3722_regs->desc[id].n_linear_ranges = diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 8b5e4c712a01..c31e0485de25 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -323,7 +323,7 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip) if (ret) return ret; dev_info(pfuze_chip->dev, - "Full lay: %x, Metal lay: %x\n", + "Full layer: %x, Metal layer: %x\n", (value & 0xf0) >> 4, value & 0x0f); ret = regmap_read(pfuze_chip->regmap, PFUZE100_FABID, &value); diff --git a/include/linux/mfd/as3722.h b/include/linux/mfd/as3722.h index 16bf8a0dcd97..bb9616dc0efa 100644 --- a/include/linux/mfd/as3722.h +++ b/include/linux/mfd/as3722.h @@ -151,6 +151,7 @@ #define AS3722_ASIC_ID1_REG 0x90 #define AS3722_ASIC_ID2_REG 0x91 #define AS3722_LOCK_REG 0x9E +#define AS3722_FUSE7_REG 0xA7 #define AS3722_MAX_REGISTER 0xF4 #define AS3722_SD0_EXT_ENABLE_MASK 0x03 @@ -224,6 +225,7 @@ #define AS3722_SD_VSEL_MASK 0x7F #define AS3722_SD0_VSEL_MIN 0x01 #define AS3722_SD0_VSEL_MAX 0x5A +#define AS3722_SD0_VSEL_LOW_VOL_MAX 0x6E #define AS3722_SD2_VSEL_MIN 0x01 #define AS3722_SD2_VSEL_MAX 0x7F @@ -341,6 +343,8 @@ #define AS3722_EXT_CONTROL_ENABLE2 0x2 #define AS3722_EXT_CONTROL_ENABLE3 0x3 +#define AS3722_FUSE7_SD0_LOW_VOLTAGE BIT(4) + /* Interrupt IDs */ enum as3722_irq { AS3722_IRQ_LID, diff --git a/include/linux/regulator/act8865.h b/include/linux/regulator/act8865.h new file mode 100644 index 000000000000..49206c1b4905 --- /dev/null +++ b/include/linux/regulator/act8865.h @@ -0,0 +1,53 @@ +/* + * act8865.h -- Voltage regulation for the active-semi act8865 + * + * Copyright (C) 2013 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_REGULATOR_ACT8865_H +#define __LINUX_REGULATOR_ACT8865_H + +#include <linux/regulator/machine.h> + +enum { + ACT8865_ID_DCDC1, + ACT8865_ID_DCDC2, + ACT8865_ID_DCDC3, + ACT8865_ID_LDO1, + ACT8865_ID_LDO2, + ACT8865_ID_LDO3, + ACT8865_ID_LDO4, + ACT8865_REG_NUM, +}; + +/** + * act8865_regulator_data - regulator data + * @id: regulator id + * @name: regulator name + * @platform_data: regulator init data + */ +struct act8865_regulator_data { + int id; + const char *name; + struct regulator_init_data *platform_data; +}; + +/** + * act8865_platform_data - platform data for act8865 + * @num_regulators: number of regulators used + * @regulators: pointer to regulators used + */ +struct act8865_platform_data { + int num_regulators; + struct act8865_regulator_data *regulators; +}; +#endif |