diff options
27 files changed, 433 insertions, 110 deletions
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index 4edd78dfb362..bbce1215434a 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -1,13 +1,21 @@ 00-INDEX - this file +3c359.txt + - information on the 3Com TokenLink Velocity XL (3c5359) driver. 3c505.txt - information on the 3Com EtherLink Plus (3c505) driver. +3c509.txt + - information on the 3Com Etherlink III Series Ethernet cards. 6pack.txt - info on the 6pack protocol, an alternative to KISS for AX.25 DLINK.txt - info on the D-Link DE-600/DE-620 parallel port pocket adapters PLIP.txt - PLIP: The Parallel Line Internet Protocol device driver +README.ipw2100 + - README for the Intel PRO/Wireless 2100 driver. +README.ipw2200 + - README for the Intel PRO/Wireless 2915ABG and 2200BG driver. README.sb1000 - info on General Instrument/NextLevel SURFboard1000 cable modem. alias.txt @@ -20,8 +28,12 @@ atm.txt - info on where to get ATM programs and support for Linux. ax25.txt - info on using AX.25 and NET/ROM code for Linux +batman-adv.txt + - B.A.T.M.A.N routing protocol on top of layer 2 Ethernet Frames. baycom.txt - info on the driver for Baycom style amateur radio modems +bonding.txt + - Linux Ethernet Bonding Driver HOWTO: link aggregation in Linux. bridge.txt - where to get user space programs for ethernet bridging with Linux. can.txt @@ -34,32 +46,60 @@ cxacru.txt - Conexant AccessRunner USB ADSL Modem cxacru-cf.py - Conexant AccessRunner USB ADSL Modem configuration file parser +cxgb.txt + - Release Notes for the Chelsio N210 Linux device driver. +dccp.txt + - the Datagram Congestion Control Protocol (DCCP) (RFC 4340..42). de4x5.txt - the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver decnet.txt - info on using the DECnet networking layer in Linux. depca.txt - the Digital DEPCA/EtherWORKS DE1?? and DE2?? LANCE Ethernet driver +dl2k.txt + - README for D-Link DL2000-based Gigabit Ethernet Adapters (dl2k.ko). +dm9000.txt + - README for the Simtec DM9000 Network driver. dmfe.txt - info on the Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver. +dns_resolver.txt + - The DNS resolver module allows kernel servies to make DNS queries. +driver.txt + - Softnet driver issues. e100.txt - info on Intel's EtherExpress PRO/100 line of 10/100 boards e1000.txt - info on Intel's E1000 line of gigabit ethernet boards +e1000e.txt + - README for the Intel Gigabit Ethernet Driver (e1000e). eql.txt - serial IP load balancing ewrk3.txt - the Digital EtherWORKS 3 DE203/4/5 Ethernet driver +fib_trie.txt + - Level Compressed Trie (LC-trie) notes: a structure for routing. filter.txt - Linux Socket Filtering fore200e.txt - FORE Systems PCA-200E/SBA-200E ATM NIC driver info. framerelay.txt - info on using Frame Relay/Data Link Connection Identifier (DLCI). +gen_stats.txt + - Generic networking statistics for netlink users. +generic_hdlc.txt + - The generic High Level Data Link Control (HDLC) layer. generic_netlink.txt - info on Generic Netlink +gianfar.txt + - Gianfar Ethernet Driver. ieee802154.txt - Linux IEEE 802.15.4 implementation, API and drivers +ifenslave.c + - Configure network interfaces for parallel routing (bonding). +igb.txt + - README for the Intel Gigabit Ethernet Driver (igb). +igbvf.txt + - README for the Intel Gigabit Ethernet Driver (igbvf). ip-sysctl.txt - /proc/sys/net/ipv4/* variables ip_dynaddr.txt @@ -68,41 +108,117 @@ ipddp.txt - AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation iphase.txt - Interphase PCI ATM (i)Chip IA Linux driver info. +ipv6.txt + - Options to the ipv6 kernel module. +ipvs-sysctl.txt + - Per-inode explanation of the /proc/sys/net/ipv4/vs interface. irda.txt - where to get IrDA (infrared) utilities and info for Linux. +ixgb.txt + - README for the Intel 10 Gigabit Ethernet Driver (ixgb). +ixgbe.txt + - README for the Intel 10 Gigabit Ethernet Driver (ixgbe). +ixgbevf.txt + - README for the Intel Virtual Function (VF) Driver (ixgbevf). +l2tp.txt + - User guide to the L2TP tunnel protocol. lapb-module.txt - programming information of the LAPB module. ltpc.txt - the Apple or Farallon LocalTalk PC card driver +mac80211-injection.txt + - HOWTO use packet injection with mac80211 multicast.txt - Behaviour of cards under Multicast +multiqueue.txt + - HOWTO for multiqueue network device support. +netconsole.txt + - The network console module netconsole.ko: configuration and notes. +netdev-features.txt + - Network interface features API description. netdevices.txt - info on network device driver functions exported to the kernel. +netif-msg.txt + - Design of the network interface message level setting (NETIF_MSG_*). +nfc.txt + - The Linux Near Field Communication (NFS) subsystem. olympic.txt - IBM PCI Pit/Pit-Phy/Olympic Token Ring driver info. +operstates.txt + - Overview of network interface operational states. +packet_mmap.txt + - User guide to memory mapped packet socket rings (PACKET_[RT]X_RING). +phonet.txt + - The Phonet packet protocol used in Nokia cellular modems. +phy.txt + - The PHY abstraction layer. +pktgen.txt + - User guide to the kernel packet generator (pktgen.ko). policy-routing.txt - IP policy-based routing +ppp_generic.txt + - Information about the generic PPP driver. +proc_net_tcp.txt + - Per inode overview of the /proc/net/tcp and /proc/net/tcp6 interfaces. +radiotap-headers.txt + - Background on radiotap headers. ray_cs.txt - Raylink Wireless LAN card driver info. +rds.txt + - Background on the reliable, ordered datagram delivery method RDS. +regulatory.txt + - Overview of the Linux wireless regulatory infrastructure. +rxrpc.txt + - Guide to the RxRPC protocol. +s2io.txt + - Release notes for Neterion Xframe I/II 10GbE driver. +scaling.txt + - Explanation of network scaling techniques: RSS, RPS, RFS, aRFS, XPS. +sctp.txt + - Notes on the Linux kernel implementation of the SCTP protocol. +secid.txt + - Explanation of the secid member in flow structures. skfp.txt - SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info. smc9.txt - the driver for SMC's 9000 series of Ethernet cards smctr.txt - SMC TokenCard TokenRing Linux driver info. +spider-net.txt + - README for the Spidernet Driver (as found in PS3 / Cell BE). +stmmac.txt + - README for the STMicro Synopsys Ethernet driver. +tc-actions-env-rules.txt + - rules for traffic control (tc) actions. +timestamping.txt + - overview of network packet timestamping variants. tcp.txt - short blurb on how TCP output takes place. +tcp-thin.txt + - kernel tuning options for low rate 'thin' TCP streams. tlan.txt - ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info. tms380tr.txt - SysKonnect Token Ring ISA/PCI adapter driver info. +tproxy.txt + - Transparent proxy support user guide. tuntap.txt - TUN/TAP device driver, allowing user space Rx/Tx of packets. +udplite.txt + - UDP-Lite protocol (RFC 3828) introduction. vortex.txt - info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards. +vxge.txt + - README for the Neterion X3100 PCIe Server Adapter. x25.txt - general info on X.25 development. x25-iface.txt - description of the X.25 Packet Layer to LAPB device interface. +xfrm_proc.txt + - description of the statistics package for XFRM. +xfrm_sync.txt + - sync patches for XFRM enable migration of an SA between hosts. +xfrm_sysctl.txt + - description of the XFRM configuration options. z8530drv.txt - info about Linux driver for Z8530 based HDLC cards for AX.25 diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index db2a4067013c..81546990f41c 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -992,7 +992,7 @@ bindv6only - BOOLEAN TRUE: disable IPv4-mapped address feature FALSE: enable IPv4-mapped address feature - Default: FALSE (as specified in RFC2553bis) + Default: FALSE (as specified in RFC3493) IPv6 Fragmentation: diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt index 7254b4b5910e..58fd7414e6c0 100644 --- a/Documentation/networking/scaling.txt +++ b/Documentation/networking/scaling.txt @@ -52,7 +52,8 @@ module parameter for specifying the number of hardware queues to configure. In the bnx2x driver, for instance, this parameter is called num_queues. A typical RSS configuration would be to have one receive queue for each CPU if the device supports enough queues, or otherwise at least -one for each cache domain at a particular cache level (L1, L2, etc.). +one for each memory domain, where a memory domain is a set of CPUs that +share a particular memory level (L1, L2, NUMA node, etc.). The indirection table of an RSS device, which resolves a queue by masked hash, is usually programmed by the driver at initialization. The @@ -82,11 +83,17 @@ RSS should be enabled when latency is a concern or whenever receive interrupt processing forms a bottleneck. Spreading load between CPUs decreases queue length. For low latency networking, the optimal setting is to allocate as many queues as there are CPUs in the system (or the -NIC maximum, if lower). Because the aggregate number of interrupts grows -with each additional queue, the most efficient high-rate configuration +NIC maximum, if lower). The most efficient high-rate configuration is likely the one with the smallest number of receive queues where no -CPU that processes receive interrupts reaches 100% utilization. Per-cpu -load can be observed using the mpstat utility. +receive queue overflows due to a saturated CPU, because in default +mode with interrupt coalescing enabled, the aggregate number of +interrupts (and thus work) grows with each additional queue. + +Per-cpu load can be observed using the mpstat utility, but note that on +processors with hyperthreading (HT), each hyperthread is represented as +a separate CPU. For interrupt handling, HT has shown no benefit in +initial tests, so limit the number of queues to the number of CPU cores +in the system. RPS: Receive Packet Steering @@ -145,7 +152,7 @@ the bitmap. == Suggested Configuration For a single queue device, a typical RPS configuration would be to set -the rps_cpus to the CPUs in the same cache domain of the interrupting +the rps_cpus to the CPUs in the same memory domain of the interrupting CPU. If NUMA locality is not an issue, this could also be all CPUs in the system. At high interrupt rate, it might be wise to exclude the interrupting CPU from the map since that already performs much work. @@ -154,7 +161,7 @@ For a multi-queue system, if RSS is configured so that a hardware receive queue is mapped to each CPU, then RPS is probably redundant and unnecessary. If there are fewer hardware queues than CPUs, then RPS might be beneficial if the rps_cpus for each queue are the ones that -share the same cache domain as the interrupting CPU for that queue. +share the same memory domain as the interrupting CPU for that queue. RFS: Receive Flow Steering @@ -326,7 +333,7 @@ The queue chosen for transmitting a particular flow is saved in the corresponding socket structure for the flow (e.g. a TCP connection). This transmit queue is used for subsequent packets sent on the flow to prevent out of order (ooo) packets. The choice also amortizes the cost -of calling get_xps_queues() over all packets in the connection. To avoid +of calling get_xps_queues() over all packets in the flow. To avoid ooo packets, the queue for a flow can subsequently only be changed if skb->ooo_okay is set for a packet in the flow. This flag indicates that there are no outstanding packets in the flow, so the transmit queue can diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 38a83acd502e..43f2ea541088 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3419,9 +3419,27 @@ static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count) static int bond_open(struct net_device *bond_dev) { struct bonding *bond = netdev_priv(bond_dev); + struct slave *slave; + int i; bond->kill_timers = 0; + /* reset slave->backup and slave->inactive */ + read_lock(&bond->lock); + if (bond->slave_cnt > 0) { + read_lock(&bond->curr_slave_lock); + bond_for_each_slave(bond, slave, i) { + if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP) + && (slave != bond->curr_active_slave)) { + bond_set_slave_inactive_flags(slave); + } else { + bond_set_slave_active_flags(slave); + } + } + read_unlock(&bond->curr_slave_lock); + } + read_unlock(&bond->lock); + INIT_DELAYED_WORK(&bond->mcast_work, bond_resend_igmp_join_requests_delayed); if (bond_is_lb(bond)) { diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c index 231385b8e08f..c7f3d4ea1167 100644 --- a/drivers/net/can/sja1000/plx_pci.c +++ b/drivers/net/can/sja1000/plx_pci.c @@ -408,7 +408,7 @@ static void plx_pci_del_card(struct pci_dev *pdev) struct sja1000_priv *priv; int i = 0; - for (i = 0; i < card->channels; i++) { + for (i = 0; i < PLX_PCI_MAX_CHAN; i++) { dev = card->net_dev[i]; if (!dev) continue; @@ -536,7 +536,6 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev, if (err) { dev_err(&pdev->dev, "Registering device failed " "(err=%d)\n", err); - free_sja1000dev(dev); goto failure_cleanup; } @@ -549,6 +548,7 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev, dev_err(&pdev->dev, "Channel #%d not detected\n", i + 1); free_sja1000dev(dev); + card->net_dev[i] = NULL; } } diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 35916f485028..8533ad7f3559 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -155,6 +155,9 @@ struct e1000_info; #define HV_M_STATUS_SPEED_1000 0x0200 #define HV_M_STATUS_LINK_UP 0x0040 +#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */ +#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000 + /* Time to wait before putting the device into D3 if there's no link (in ms). */ #define LINK_TIMEOUT 100 @@ -454,6 +457,7 @@ struct e1000_info { #define FLAG2_DISABLE_AIM (1 << 8) #define FLAG2_CHECK_PHY_HANG (1 << 9) #define FLAG2_NO_DISABLE_RX (1 << 10) +#define FLAG2_PCIM2PCI_ARBITER_WA (1 << 11) #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 4e36978b8fd8..54add27c8f76 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -137,8 +137,9 @@ #define HV_PM_CTRL PHY_REG(770, 17) /* PHY Low Power Idle Control */ -#define I82579_LPI_CTRL PHY_REG(772, 20) -#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +#define I82579_LPI_CTRL PHY_REG(772, 20) +#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 /* EMI Registers */ #define I82579_EMI_ADDR 0x10 @@ -163,6 +164,11 @@ #define HV_KMRN_MODE_CTRL PHY_REG(769, 16) #define HV_KMRN_MDIO_SLOW 0x0400 +/* KMRN FIFO Control and Status */ +#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16) +#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000 +#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12 + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -657,6 +663,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) struct e1000_mac_info *mac = &hw->mac; s32 ret_val; bool link; + u16 phy_reg; /* * We only want to go out to the PHY registers to see if Auto-Neg @@ -689,16 +696,35 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) mac->get_link_status = false; - if (hw->phy.type == e1000_phy_82578) { - ret_val = e1000_link_stall_workaround_hv(hw); - if (ret_val) - goto out; - } - - if (hw->mac.type == e1000_pch2lan) { + switch (hw->mac.type) { + case e1000_pch2lan: ret_val = e1000_k1_workaround_lv(hw); if (ret_val) goto out; + /* fall-thru */ + case e1000_pchlan: + if (hw->phy.type == e1000_phy_82578) { + ret_val = e1000_link_stall_workaround_hv(hw); + if (ret_val) + goto out; + } + + /* + * Workaround for PCHx parts in half-duplex: + * Set the number of preambles removed from the packet + * when it is passed from the PHY to the MAC to prevent + * the MAC from misinterpreting the packet type. + */ + e1e_rphy(hw, HV_KMRN_FIFO_CTRLSTA, &phy_reg); + phy_reg &= ~HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK; + + if ((er32(STATUS) & E1000_STATUS_FD) != E1000_STATUS_FD) + phy_reg |= (1 << HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT); + + e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, phy_reg); + break; + default: + break; } /* @@ -788,6 +814,11 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) (adapter->hw.phy.type == e1000_phy_igp_3)) adapter->flags |= FLAG_LSC_GIG_SPEED_DROP; + /* Enable workaround for 82579 w/ ME enabled */ + if ((adapter->hw.mac.type == e1000_pch2lan) && + (er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) + adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA; + /* Disable EEE by default until IEEE802.3az spec is finalized */ if (adapter->flags2 & FLAG2_HAS_EEE) adapter->hw.dev_spec.ich8lan.eee_disable = true; @@ -1355,7 +1386,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) return ret_val; /* Preamble tuning for SSC */ - ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204); + ret_val = e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, 0xA204); if (ret_val) return ret_val; } @@ -1645,6 +1676,7 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) s32 ret_val = 0; u16 status_reg = 0; u32 mac_reg; + u16 phy_reg; if (hw->mac.type != e1000_pch2lan) goto out; @@ -1659,12 +1691,19 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) mac_reg = er32(FEXTNVM4); mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; - if (status_reg & HV_M_STATUS_SPEED_1000) + ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); + if (ret_val) + goto out; + + if (status_reg & HV_M_STATUS_SPEED_1000) { mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; - else + phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; + } else { mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC; - + phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; + } ew32(FEXTNVM4, mac_reg); + ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); } out: diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 362f70382cdd..2198e615f241 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -519,6 +519,63 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, } /** + * e1000e_update_tail_wa - helper function for e1000e_update_[rt]dt_wa() + * @hw: pointer to the HW structure + * @tail: address of tail descriptor register + * @i: value to write to tail descriptor register + * + * When updating the tail register, the ME could be accessing Host CSR + * registers at the same time. Normally, this is handled in h/w by an + * arbiter but on some parts there is a bug that acknowledges Host accesses + * later than it should which could result in the descriptor register to + * have an incorrect value. Workaround this by checking the FWSM register + * which has bit 24 set while ME is accessing Host CSR registers, wait + * if it is set and try again a number of times. + **/ +static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, u8 __iomem * tail, + unsigned int i) +{ + unsigned int j = 0; + + while ((j++ < E1000_ICH_FWSM_PCIM2PCI_COUNT) && + (er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI)) + udelay(50); + + writel(i, tail); + + if ((j == E1000_ICH_FWSM_PCIM2PCI_COUNT) && (i != readl(tail))) + return E1000_ERR_SWFW_SYNC; + + return 0; +} + +static void e1000e_update_rdt_wa(struct e1000_adapter *adapter, unsigned int i) +{ + u8 __iomem *tail = (adapter->hw.hw_addr + adapter->rx_ring->tail); + struct e1000_hw *hw = &adapter->hw; + + if (e1000e_update_tail_wa(hw, tail, i)) { + u32 rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); + e_err("ME firmware caused invalid RDT - resetting\n"); + schedule_work(&adapter->reset_task); + } +} + +static void e1000e_update_tdt_wa(struct e1000_adapter *adapter, unsigned int i) +{ + u8 __iomem *tail = (adapter->hw.hw_addr + adapter->tx_ring->tail); + struct e1000_hw *hw = &adapter->hw; + + if (e1000e_update_tail_wa(hw, tail, i)) { + u32 tctl = er32(TCTL); + ew32(TCTL, tctl & ~E1000_TCTL_EN); + e_err("ME firmware caused invalid TDT - resetting\n"); + schedule_work(&adapter->reset_task); + } +} + +/** * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended * @adapter: address of board private structure **/ @@ -573,7 +630,10 @@ map_skb: * such as IA-64). */ wmb(); - writel(i, adapter->hw.hw_addr + rx_ring->tail); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_rdt_wa(adapter, i); + else + writel(i, adapter->hw.hw_addr + rx_ring->tail); } i++; if (i == rx_ring->count) @@ -673,7 +733,11 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, * such as IA-64). */ wmb(); - writel(i << 1, adapter->hw.hw_addr + rx_ring->tail); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_rdt_wa(adapter, i << 1); + else + writel(i << 1, + adapter->hw.hw_addr + rx_ring->tail); } i++; @@ -756,7 +820,10 @@ check_page: * applicable for weak-ordered memory model archs, * such as IA-64). */ wmb(); - writel(i, adapter->hw.hw_addr + rx_ring->tail); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_rdt_wa(adapter, i); + else + writel(i, adapter->hw.hw_addr + rx_ring->tail); } } @@ -4689,7 +4756,12 @@ static void e1000_tx_queue(struct e1000_adapter *adapter, wmb(); tx_ring->next_to_use = i; - writel(i, adapter->hw.hw_addr + tx_ring->tail); + + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_tdt_wa(adapter, i); + else + writel(i, adapter->hw.hw_addr + tx_ring->tail); + /* * we need this if more than one processor can write to our tail * at a time, it synchronizes IO on IA64/Altix systems diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index e55df308a3af..6d5fbd4d4256 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -5615,7 +5615,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i goto out_error; } - nv_vlan_mode(dev, dev->features); + if (id->driver_data & DEV_HAS_VLAN) + nv_vlan_mode(dev, dev->features); netif_carrier_off(dev); diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 2659daad783d..31d5c574e5a9 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -2710,8 +2710,13 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, /* Tell the skb what kind of packet this is */ skb->protocol = eth_type_trans(skb, dev); - /* Set vlan tag */ - if (fcb->flags & RXFCB_VLN) + /* + * There's need to check for NETIF_F_HW_VLAN_RX here. + * Even if vlan rx accel is disabled, on some chips + * RXFCB_VLN is pseudo randomly set. + */ + if (dev->features & NETIF_F_HW_VLAN_RX && + fcb->flags & RXFCB_VLN) __vlan_hwaccel_put_tag(skb, fcb->vlctl); /* Send the packet up the stack */ diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c index 6e350692d118..25a8c2adb001 100644 --- a/drivers/net/gianfar_ethtool.c +++ b/drivers/net/gianfar_ethtool.c @@ -686,10 +686,21 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u { unsigned int last_rule_idx = priv->cur_filer_idx; unsigned int cmp_rqfpr; - unsigned int local_rqfpr[MAX_FILER_IDX + 1]; - unsigned int local_rqfcr[MAX_FILER_IDX + 1]; + unsigned int *local_rqfpr; + unsigned int *local_rqfcr; int i = 0x0, k = 0x0; int j = MAX_FILER_IDX, l = 0x0; + int ret = 1; + + local_rqfpr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1), + GFP_KERNEL); + local_rqfcr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1), + GFP_KERNEL); + if (!local_rqfpr || !local_rqfcr) { + pr_err("Out of memory\n"); + ret = 0; + goto err; + } switch (class) { case TCP_V4_FLOW: @@ -706,7 +717,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u break; default: pr_err("Right now this class is not supported\n"); - return 0; + ret = 0; + goto err; } for (i = 0; i < MAX_FILER_IDX + 1; i++) { @@ -721,7 +733,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u if (i == MAX_FILER_IDX + 1) { pr_err("No parse rule found, can't create hash rules\n"); - return 0; + ret = 0; + goto err; } /* If a match was found, then it begins the starting of a cluster rule @@ -765,7 +778,10 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u priv->cur_filer_idx = priv->cur_filer_idx - 1; } - return 1; +err: + kfree(local_rqfcr); + kfree(local_rqfpr); + return ret; } static int gfar_set_hash_opts(struct gfar_private *priv, struct ethtool_rxnfc *cmd) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index e86297b32733..22790394318a 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1459,8 +1459,10 @@ static void ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, if (ixgbe_rx_is_fcoe(adapter, rx_desc)) { ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb, staterr); - if (!ddp_bytes) + if (!ddp_bytes) { + dev_kfree_skb_any(skb); goto next_desc; + } } #endif /* IXGBE_FCOE */ ixgbe_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc); diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index ad35c210b839..190f619e4215 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -21,6 +21,7 @@ */ #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/dma-mapping.h> #include <linux/etherdevice.h> #include <linux/delay.h> diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index a03336e086d5..f06fb78383a1 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -228,23 +228,40 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) { if (flags & USB_CDC_NCM_NCAP_NTB_INPUT_SIZE) { - struct usb_cdc_ncm_ndp_input_size ndp_in_sz; + struct usb_cdc_ncm_ndp_input_size *ndp_in_sz; + + ndp_in_sz = kzalloc(sizeof(*ndp_in_sz), GFP_KERNEL); + if (!ndp_in_sz) { + err = -ENOMEM; + goto size_err; + } + err = usb_control_msg(ctx->udev, usb_sndctrlpipe(ctx->udev, 0), USB_CDC_SET_NTB_INPUT_SIZE, USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE, - 0, iface_no, &ndp_in_sz, 8, 1000); + 0, iface_no, ndp_in_sz, 8, 1000); + kfree(ndp_in_sz); } else { - __le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max); + __le32 *dwNtbInMaxSize; + dwNtbInMaxSize = kzalloc(sizeof(*dwNtbInMaxSize), + GFP_KERNEL); + if (!dwNtbInMaxSize) { + err = -ENOMEM; + goto size_err; + } + *dwNtbInMaxSize = cpu_to_le32(ctx->rx_max); + err = usb_control_msg(ctx->udev, usb_sndctrlpipe(ctx->udev, 0), USB_CDC_SET_NTB_INPUT_SIZE, USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE, - 0, iface_no, &dwNtbInMaxSize, 4, 1000); + 0, iface_no, dwNtbInMaxSize, 4, 1000); + kfree(dwNtbInMaxSize); } - +size_err: if (err < 0) pr_debug("Setting NTB Input Size failed\n"); } @@ -325,19 +342,29 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) /* set Max Datagram Size (MTU) */ if (flags & USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE) { - __le16 max_datagram_size; + __le16 *max_datagram_size; u16 eth_max_sz = le16_to_cpu(ctx->ether_desc->wMaxSegmentSize); + + max_datagram_size = kzalloc(sizeof(*max_datagram_size), + GFP_KERNEL); + if (!max_datagram_size) { + err = -ENOMEM; + goto max_dgram_err; + } + err = usb_control_msg(ctx->udev, usb_rcvctrlpipe(ctx->udev, 0), USB_CDC_GET_MAX_DATAGRAM_SIZE, USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE, - 0, iface_no, &max_datagram_size, + 0, iface_no, max_datagram_size, 2, 1000); if (err < 0) { pr_debug("GET_MAX_DATAGRAM_SIZE failed, use size=%u\n", CDC_NCM_MIN_DATAGRAM_SIZE); + kfree(max_datagram_size); } else { - ctx->max_datagram_size = le16_to_cpu(max_datagram_size); + ctx->max_datagram_size = + le16_to_cpu(*max_datagram_size); /* Check Eth descriptor value */ if (eth_max_sz < CDC_NCM_MAX_DATAGRAM_SIZE) { if (ctx->max_datagram_size > eth_max_sz) @@ -360,8 +387,10 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE, 0, - iface_no, &max_datagram_size, + iface_no, max_datagram_size, 2, 1000); + kfree(max_datagram_size); +max_dgram_err: if (err < 0) pr_debug("SET_MAX_DATAGRAM_SIZE failed\n"); } diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index deb1eca13c9f..7c5336c5c37f 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -515,10 +515,6 @@ static void velocity_init_cam_filter(struct velocity_info *vptr) mac_set_cam_mask(regs, vptr->mCAMmask); /* Enable VCAMs */ - - if (test_bit(0, vptr->active_vlans)) - WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG); - for_each_set_bit(vid, vptr->active_vlans, VLAN_N_VID) { mac_set_vlan_cam(regs, i, (u8 *) &vid); vptr->vCAMmask[i / 8] |= 0x1 << (i % 8); diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 1cbacb389652..0959583feb27 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -1929,14 +1929,17 @@ static void vmxnet3_vlan_rx_add_vid(struct net_device *netdev, u16 vid) { struct vmxnet3_adapter *adapter = netdev_priv(netdev); - u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; - unsigned long flags; - VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid); - spin_lock_irqsave(&adapter->cmd_lock, flags); - VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, - VMXNET3_CMD_UPDATE_VLAN_FILTERS); - spin_unlock_irqrestore(&adapter->cmd_lock, flags); + if (!(netdev->flags & IFF_PROMISC)) { + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + unsigned long flags; + + VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid); + spin_lock_irqsave(&adapter->cmd_lock, flags); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); + } set_bit(vid, adapter->active_vlans); } @@ -1946,14 +1949,17 @@ static void vmxnet3_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) { struct vmxnet3_adapter *adapter = netdev_priv(netdev); - u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; - unsigned long flags; - VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid); - spin_lock_irqsave(&adapter->cmd_lock, flags); - VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, - VMXNET3_CMD_UPDATE_VLAN_FILTERS); - spin_unlock_irqrestore(&adapter->cmd_lock, flags); + if (!(netdev->flags & IFF_PROMISC)) { + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + unsigned long flags; + + VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid); + spin_lock_irqsave(&adapter->cmd_lock, flags); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); + } clear_bit(vid, adapter->active_vlans); } diff --git a/drivers/net/wireless/iwlwifi/iwl-pci.c b/drivers/net/wireless/iwlwifi/iwl-pci.c index 69d4ec467dca..2fdbffa079c1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-pci.c +++ b/drivers/net/wireless/iwlwifi/iwl-pci.c @@ -478,27 +478,22 @@ out_no_pci: return err; } -static void iwl_pci_down(struct iwl_bus *bus) -{ - struct iwl_pci_bus *pci_bus = (struct iwl_pci_bus *) bus->bus_specific; - - pci_disable_msi(pci_bus->pci_dev); - pci_iounmap(pci_bus->pci_dev, pci_bus->hw_base); - pci_release_regions(pci_bus->pci_dev); - pci_disable_device(pci_bus->pci_dev); - pci_set_drvdata(pci_bus->pci_dev, NULL); - - kfree(bus); -} - static void __devexit iwl_pci_remove(struct pci_dev *pdev) { struct iwl_priv *priv = pci_get_drvdata(pdev); - void *bus_specific = priv->bus->bus_specific; + struct iwl_bus *bus = priv->bus; + struct iwl_pci_bus *pci_bus = IWL_BUS_GET_PCI_BUS(bus); + struct pci_dev *pci_dev = IWL_BUS_GET_PCI_DEV(bus); iwl_remove(priv); - iwl_pci_down(bus_specific); + pci_disable_msi(pci_dev); + pci_iounmap(pci_dev, pci_bus->hw_base); + pci_release_regions(pci_dev); + pci_disable_device(pci_dev); + pci_set_drvdata(pci_dev, NULL); + + kfree(bus); } #ifdef CONFIG_PM diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 939563162fb3..dbf501ca317f 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -464,6 +464,15 @@ static bool rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg) int wcid, ack, pid; int tx_wcid, tx_ack, tx_pid; + if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) || + !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) { + WARNING(entry->queue->rt2x00dev, + "Data pending for entry %u in queue %u\n", + entry->entry_idx, entry->queue->qid); + cond_resched(); + return false; + } + wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID); ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED); pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE); @@ -529,12 +538,11 @@ static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev) entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); if (rt2800usb_txdone_entry_check(entry, reg)) break; + entry = NULL; } - if (!entry || rt2x00queue_empty(queue)) - break; - - rt2800_txdone_entry(entry, reg); + if (entry) + rt2800_txdone_entry(entry, reg); } } @@ -558,8 +566,10 @@ static void rt2800usb_work_txdone(struct work_struct *work) while (!rt2x00queue_empty(queue)) { entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) || + !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) break; + if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE); else if (rt2x00queue_status_timeout(entry)) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index b6b4542c2460..7fbb55c9da82 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -262,23 +262,20 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb) struct queue_entry *entry = (struct queue_entry *)urb->context; struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - if (!test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; - - if (rt2x00dev->ops->lib->tx_dma_done) - rt2x00dev->ops->lib->tx_dma_done(entry); - - /* - * Report the frame as DMA done - */ - rt2x00lib_dmadone(entry); - /* * Check if the frame was correctly uploaded */ if (urb->status) set_bit(ENTRY_DATA_IO_FAILED, &entry->flags); + /* + * Report the frame as DMA done + */ + rt2x00lib_dmadone(entry); + if (rt2x00dev->ops->lib->tx_dma_done) + rt2x00dev->ops->lib->tx_dma_done(entry); /* * Schedule the delayed work for reading the TX status * from the device. diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c index 7e33f1f4f3d4..34f6ab53e519 100644 --- a/drivers/net/wireless/wl12xx/acx.c +++ b/drivers/net/wireless/wl12xx/acx.c @@ -77,8 +77,6 @@ int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth) auth->sleep_auth = sleep_auth; ret = wl1271_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth)); - if (ret < 0) - return ret; out: kfree(auth); @@ -624,10 +622,8 @@ int wl1271_acx_cca_threshold(struct wl1271 *wl) ret = wl1271_cmd_configure(wl, ACX_CCA_THRESHOLD, detection, sizeof(*detection)); - if (ret < 0) { + if (ret < 0) wl1271_warning("failed to set cca threshold: %d", ret); - return ret; - } out: kfree(detection); diff --git a/drivers/net/wireless/wl12xx/testmode.c b/drivers/net/wireless/wl12xx/testmode.c index 5d5e1ef87206..88add68bd9ac 100644 --- a/drivers/net/wireless/wl12xx/testmode.c +++ b/drivers/net/wireless/wl12xx/testmode.c @@ -139,12 +139,15 @@ static int wl1271_tm_cmd_interrogate(struct wl1271 *wl, struct nlattr *tb[]) if (ret < 0) { wl1271_warning("testmode cmd interrogate failed: %d", ret); + kfree(cmd); return ret; } skb = cfg80211_testmode_alloc_reply_skb(wl->hw->wiphy, sizeof(*cmd)); - if (!skb) + if (!skb) { + kfree(cmd); return -ENOMEM; + } NLA_PUT(skb, WL1271_TM_ATTR_DATA, sizeof(*cmd), cmd); diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index 5f27f8e30254..f1f2f7bb6661 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -167,6 +167,8 @@ struct sk_buff *vlan_untag(struct sk_buff *skb) if (unlikely(!skb)) goto err_free; + skb_reset_network_header(skb); + skb_reset_transport_header(skb); return skb; err_free: diff --git a/net/atm/br2684.c b/net/atm/br2684.c index 52cfd0c3ea71..d07223c834af 100644 --- a/net/atm/br2684.c +++ b/net/atm/br2684.c @@ -558,12 +558,13 @@ static int br2684_regvcc(struct atm_vcc *atmvcc, void __user * arg) spin_unlock_irqrestore(&rq->lock, flags); skb_queue_walk_safe(&queue, skb, tmp) { - struct net_device *dev = skb->dev; + struct net_device *dev; + + br2684_push(atmvcc, skb); + dev = skb->dev; dev->stats.rx_bytes -= skb->len; dev->stats.rx_packets--; - - br2684_push(atmvcc, skb); } /* initialize netdev carrier state */ diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index 2cdf0070419f..e73815456adf 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -231,6 +231,7 @@ static struct net_bridge_port *new_nbp(struct net_bridge *br, int br_add_bridge(struct net *net, const char *name) { struct net_device *dev; + int res; dev = alloc_netdev(sizeof(struct net_bridge), name, br_dev_setup); @@ -240,7 +241,10 @@ int br_add_bridge(struct net *net, const char *name) dev_net_set(dev, net); - return register_netdev(dev); + res = register_netdev(dev); + if (res) + free_netdev(dev); + return res; } int br_del_bridge(struct net *net, const char *name) diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 9cb191ecaba8..147ede38ab48 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -913,7 +913,7 @@ static int ipv6_getsockopt_sticky(struct sock *sk, struct ipv6_txoptions *opt, } static int do_ipv6_getsockopt(struct sock *sk, int level, int optname, - char __user *optval, int __user *optlen) + char __user *optval, int __user *optlen, unsigned flags) { struct ipv6_pinfo *np = inet6_sk(sk); int len; @@ -962,7 +962,7 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname, msg.msg_control = optval; msg.msg_controllen = len; - msg.msg_flags = 0; + msg.msg_flags = flags; lock_sock(sk); skb = np->pktoptions; @@ -1222,7 +1222,7 @@ int ipv6_getsockopt(struct sock *sk, int level, int optname, if(level != SOL_IPV6) return -ENOPROTOOPT; - err = do_ipv6_getsockopt(sk, level, optname, optval, optlen); + err = do_ipv6_getsockopt(sk, level, optname, optval, optlen, 0); #ifdef CONFIG_NETFILTER /* we need to exclude all possible ENOPROTOOPTs except default case */ if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) { @@ -1264,7 +1264,8 @@ int compat_ipv6_getsockopt(struct sock *sk, int level, int optname, return compat_mc_getsockopt(sk, level, optname, optval, optlen, ipv6_getsockopt); - err = do_ipv6_getsockopt(sk, level, optname, optval, optlen); + err = do_ipv6_getsockopt(sk, level, optname, optval, optlen, + MSG_CMSG_COMPAT); #ifdef CONFIG_NETFILTER /* we need to exclude all possible ENOPROTOOPTs except default case */ if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) { diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 07bf1085458f..00b15ac7a702 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -672,6 +672,9 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb, if (skb->protocol != htons(ETH_P_IPV6)) goto tx_error; + if (tos == 1) + tos = ipv6_get_dsfield(iph6); + /* ISATAP (RFC4214) - must come before 6to4 */ if (dev->priv_flags & IFF_ISATAP) { struct neighbour *neigh = NULL; diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c index 102fc212cd64..e051398fdf6b 100644 --- a/net/sched/act_mirred.c +++ b/net/sched/act_mirred.c @@ -196,8 +196,7 @@ static int tcf_mirred(struct sk_buff *skb, const struct tc_action *a, skb2->skb_iif = skb->dev->ifindex; skb2->dev = dev; - dev_queue_xmit(skb2); - err = 0; + err = dev_queue_xmit(skb2); out: if (err) { |