diff options
| -rw-r--r-- | drivers/ata/ahci.c | 3 | ||||
| -rw-r--r-- | drivers/ata/ahci.h | 1 | ||||
| -rw-r--r-- | drivers/ata/ahci_platform.c | 3 | ||||
| -rw-r--r-- | drivers/ata/libahci.c | 158 | ||||
| -rw-r--r-- | drivers/ata/libata-core.c | 201 | ||||
| -rw-r--r-- | drivers/ata/libata-eh.c | 164 | ||||
| -rw-r--r-- | drivers/ata/libata-scsi.c | 11 | ||||
| -rw-r--r-- | drivers/ata/libata.h | 4 | ||||
| -rw-r--r-- | include/linux/libata.h | 17 |
9 files changed, 206 insertions, 356 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 68f7b4216501..328826381a2d 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1208,9 +1208,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ata_port_pbar_desc(ap, AHCI_PCI_BAR, 0x100 + ap->port_no * 0x80, "port"); - /* set initial link pm policy */ - ap->lpm_policy = ATA_LPM_UNKNOWN; - /* set enclosure management message type */ if (ap->flags & ATA_FLAG_EM) ap->em_message_type = hpriv->em_msg_type; diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 93867d3f8dd3..1a2aacfdebc5 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -201,7 +201,6 @@ enum { AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */ AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */ AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ - AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */ diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 07556853c0d6..6fef1fa75c54 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -129,9 +129,6 @@ static int __init ahci_probe(struct platform_device *pdev) ata_port_desc(ap, "mmio %pR", mem); ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); - /* set initial link pm policy */ - ap->lpm_policy = ATA_LPM_UNKNOWN; - /* set enclosure management message type */ if (ap->flags & ATA_FLAG_EM) ap->em_message_type = hpriv->em_msg_type; diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index ed7803f2b4f1..437f92597788 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -56,8 +56,8 @@ MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip) module_param_named(ignore_sss, ahci_ignore_sss, int, 0444); MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)"); -static int ahci_enable_alpm(struct ata_port *ap, enum ata_lpm_policy policy); -static void ahci_disable_alpm(struct ata_port *ap); +static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints); static ssize_t ahci_led_show(struct ata_port *ap, char *buf); static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, size_t size); @@ -163,8 +163,7 @@ struct ata_port_operations ahci_ops = { .pmp_attach = ahci_pmp_attach, .pmp_detach = ahci_pmp_detach, - .enable_pm = ahci_enable_alpm, - .disable_pm = ahci_disable_alpm, + .set_lpm = ahci_set_lpm, .em_show = ahci_led_show, .em_store = ahci_led_store, .sw_activity_show = ahci_activity_show, @@ -641,126 +640,56 @@ static void ahci_power_up(struct ata_port *ap) writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD); } -static void ahci_disable_alpm(struct ata_port *ap) +static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned int hints) { + struct ata_port *ap = link->ap; struct ahci_host_priv *hpriv = ap->host->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 cmd; struct ahci_port_priv *pp = ap->private_data; - - /* LPM bits should be disabled by libata-core */ - /* get the existing command bits */ - cmd = readl(port_mmio + PORT_CMD); - - /* disable ALPM and ASP */ - cmd &= ~PORT_CMD_ASP; - cmd &= ~PORT_CMD_ALPE; - - /* force the interface back to active */ - cmd |= PORT_CMD_ICC_ACTIVE; - - /* write out new cmd value */ - writel(cmd, port_mmio + PORT_CMD); - cmd = readl(port_mmio + PORT_CMD); - - /* wait 10ms to be sure we've come out of any low power state */ - msleep(10); - - /* clear out any PhyRdy stuff from interrupt status */ - writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT); - - /* go ahead and clean out PhyRdy Change from Serror too */ - ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); - - /* - * Clear flag to indicate that we should ignore all PhyRdy - * state changes - */ - hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG; - - /* - * Enable interrupts on Phy Ready. - */ - pp->intr_mask |= PORT_IRQ_PHYRDY; - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); - - /* - * don't change the link pm policy - we can be called - * just to turn of link pm temporarily - */ -} - -static int ahci_enable_alpm(struct ata_port *ap, enum ata_lpm_policy policy) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; void __iomem *port_mmio = ahci_port_base(ap); - u32 cmd; - struct ahci_port_priv *pp = ap->private_data; - u32 asp; - - /* Make sure the host is capable of link power management */ - if (!(hpriv->cap & HOST_CAP_ALPM)) - return -EINVAL; - switch (policy) { - case ATA_LPM_MAX_POWER: - case ATA_LPM_UNKNOWN: + if (policy != ATA_LPM_MAX_POWER) { /* - * if we came here with ATA_LPM_UNKNOWN, - * it just means this is the first time we - * have tried to enable - default to max performance, - * and let the user go to lower power modes on request. + * Disable interrupts on Phy Ready. This keeps us from + * getting woken up due to spurious phy ready + * interrupts. */ - ahci_disable_alpm(ap); - return 0; - case ATA_LPM_MIN_POWER: - /* configure HBA to enter SLUMBER */ - asp = PORT_CMD_ASP; - break; - case ATA_LPM_MED_POWER: - /* configure HBA to enter PARTIAL */ - asp = 0; - break; - default: - return -EINVAL; + pp->intr_mask &= ~PORT_IRQ_PHYRDY; + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + + sata_link_scr_lpm(link, policy, false); } - /* - * Disable interrupts on Phy Ready. This keeps us from - * getting woken up due to spurious phy ready interrupts - * TBD - Hot plug should be done via polling now, is - * that even supported? - */ - pp->intr_mask &= ~PORT_IRQ_PHYRDY; - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + if (hpriv->cap & HOST_CAP_ALPM) { + u32 cmd = readl(port_mmio + PORT_CMD); - /* - * Set a flag to indicate that we should ignore all PhyRdy - * state changes since these can happen now whenever we - * change link state - */ - hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG; + if (policy == ATA_LPM_MAX_POWER || !(hints & ATA_LPM_HIPM)) { + cmd &= ~(PORT_CMD_ASP | PORT_CMD_ALPE); + cmd |= PORT_CMD_ICC_ACTIVE; - /* get the existing command bits */ - cmd = readl(port_mmio + PORT_CMD); + writel(cmd, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); - /* - * Set ASP based on Policy - */ - cmd |= asp; + /* wait 10ms to be sure we've come out of LPM state */ + msleep(10); + } else { + cmd |= PORT_CMD_ALPE; + if (policy == ATA_LPM_MIN_POWER) + cmd |= PORT_CMD_ASP; - /* - * Setting this bit will instruct the HBA to aggressively - * enter a lower power link state when it's appropriate and - * based on the value set above for ASP - */ - cmd |= PORT_CMD_ALPE; + /* write out new cmd value */ + writel(cmd, port_mmio + PORT_CMD); + } + } - /* write out new cmd value */ - writel(cmd, port_mmio + PORT_CMD); - cmd = readl(port_mmio + PORT_CMD); + if (policy == ATA_LPM_MAX_POWER) { + sata_link_scr_lpm(link, policy, false); + + /* turn PHYRDY IRQ back on */ + pp->intr_mask |= PORT_IRQ_PHYRDY; + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + } - /* LPM bits should be set by libata-core */ return 0; } @@ -1658,15 +1587,10 @@ static void ahci_port_intr(struct ata_port *ap) if (unlikely(resetting)) status &= ~PORT_IRQ_BAD_PMP; - /* If we are getting PhyRdy, this is - * just a power state change, we should - * clear out this, plus the PhyRdy/Comm - * Wake bits from Serror - */ - if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) && - (status & PORT_IRQ_PHYRDY)) { + /* if LPM is enabled, PHYRDY doesn't mean anything */ + if (ap->link.lpm_policy > ATA_LPM_MAX_POWER) { status &= ~PORT_IRQ_PHYRDY; - ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); + ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG); } if (unlikely(status & PORT_IRQ_ERROR)) { diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index b8024451234c..7c5538b9fa3b 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1028,182 +1028,6 @@ const char *sata_spd_string(unsigned int spd) return spd_str[spd - 1]; } -static int ata_dev_set_dipm(struct ata_device *dev, enum ata_lpm_policy policy) -{ - struct ata_link *link = dev->link; - struct ata_port *ap = link->ap; - u32 scontrol; - unsigned int err_mask; - int rc; - - /* - * disallow DIPM for drivers which haven't set - * ATA_FLAG_LPM. This is because when DIPM is enabled, - * phy ready will be set in the interrupt status on - * state changes, which will cause some drivers to - * think there are errors - additionally drivers will - * need to disable hot plug. - */ - if (!(ap->flags & ATA_FLAG_LPM) || !ata_dev_enabled(dev)) { - ap->lpm_policy = ATA_LPM_UNKNOWN; - return -EINVAL; - } - - /* - * For DIPM, we will only enable it for the - * min_power setting. - * - * Why? Because Disks are too stupid to know that - * If the host rejects a request to go to SLUMBER - * they should retry at PARTIAL, and instead it - * just would give up. So, for medium_power to - * work at all, we need to only allow HIPM. - */ - rc = sata_scr_read(link, SCR_CONTROL, &scontrol); - if (rc) - return rc; - - switch (policy) { - case ATA_LPM_MIN_POWER: - /* no restrictions on LPM transitions */ - scontrol &= ~(0x3 << 8); - rc = sata_scr_write(link, SCR_CONTROL, scontrol); - if (rc) - return rc; - - /* enable DIPM */ - if (dev->flags & ATA_DFLAG_DIPM) - err_mask = ata_dev_set_feature(dev, - SETFEATURES_SATA_ENABLE, SATA_DIPM); - break; - case ATA_LPM_MED_POWER: - /* allow LPM to PARTIAL */ - scontrol &= ~(0x1 << 8); - scontrol |= (0x2 << 8); - rc = sata_scr_write(link, SCR_CONTROL, scontrol); - if (rc) - return rc; - - /* - * we don't have to disable DIPM since LPM flags - * disallow transitions to SLUMBER, which effectively - * disable DIPM if it does not support PARTIAL - */ - break; - case ATA_LPM_UNKNOWN: - case ATA_LPM_MAX_POWER: - /* disable all LPM transitions */ - scontrol |= (0x3 << 8); - rc = sata_scr_write(link, SCR_CONTROL, scontrol); - if (rc) - return rc; - - /* - * we don't have to disable DIPM since LPM flags - * disallow all transitions which effectively - * disable DIPM anyway. - */ - break; - } - - /* FIXME: handle SET FEATURES failure */ - (void) err_mask; - - return 0; -} - -/** - * ata_dev_enable_pm - enable SATA interface power management - * @dev: device to enable power management - * @policy: the link power management policy - * - * Enable SATA Interface power management. This will enable - * Device Interface Power Management (DIPM) for min_power - * policy, and then call driver specific callbacks for - * enabling Host Initiated Power management. - * - * Locking: Caller. - * Returns: -EINVAL if LPM is not supported, 0 otherwise. - */ -void ata_dev_enable_pm(struct ata_device *dev, enum ata_lpm_policy policy) -{ - int rc = 0; - struct ata_port *ap = dev->link->ap; - - /* set HIPM first, then DIPM */ - if (ap->ops->enable_pm) - rc = ap->ops->enable_pm(ap, policy); - if (rc) - goto enable_pm_out; - rc = ata_dev_set_dipm(dev, policy); - -enable_pm_out: - if (rc) - ap->lpm_policy = ATA_LPM_MAX_POWER; - else - ap->lpm_policy = policy; - return /* rc */; /* hopefully we can use 'rc' eventually */ -} - -#ifdef CONFIG_PM -/** - * ata_dev_disable_pm - disable SATA interface power management - * @dev: device to disable power management - * - * Disable SATA Interface power management. This will disable - * Device Interface Power Management (DIPM) without changing - * policy, call driver specific callbacks for disabling Host - * Initiated Power management. - * - * Locking: Caller. - * Returns: void - */ -static void ata_dev_disable_pm(struct ata_device *dev) -{ - struct ata_port *ap = dev->link->ap; - - ata_dev_set_dipm(dev, ATA_LPM_MAX_POWER); - if (ap->ops->disable_pm) - ap->ops->disable_pm(ap); -} -#endif /* CONFIG_PM */ - -void ata_lpm_schedule(struct ata_port *ap, enum ata_lpm_policy policy) -{ - ap->lpm_policy = policy; - ap->link.eh_info.action |= ATA_EH_LPM; - ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY; - ata_port_schedule_eh(ap); -} - -#ifdef CONFIG_PM -static void ata_lpm_enable(struct ata_host *host) -{ - struct ata_link *link; - struct ata_port *ap; - struct ata_device *dev; - int i; - - for (i = 0; i < host->n_ports; i++) { - ap = host->ports[i]; - ata_for_each_link(link, ap, EDGE) { - ata_for_each_dev(dev, link, ALL) - ata_dev_disable_pm(dev); - } - } -} - -static void ata_lpm_disable(struct ata_host *host) -{ - int i; - - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap = host->ports[i]; - ata_lpm_schedule(ap, ap->lpm_policy); - } -} -#endif /* CONFIG_PM */ - /** * ata_dev_classify - determine device type based on ATA-spec signature * @tf: ATA taskfile register set for device to be identified @@ -2562,13 +2386,6 @@ int ata_dev_configure(struct ata_device *dev) if (dev->flags & ATA_DFLAG_LBA48) dev->max_sectors = ATA_MAX_SECTORS_LBA48; - if (!(dev->horkage & ATA_HORKAGE_LPM)) { - if (ata_id_has_hipm(dev->id)) - dev->flags |= ATA_DFLAG_HIPM; - if (ata_id_has_dipm(dev->id)) - dev->flags |= ATA_DFLAG_DIPM; - } - /* Limit PATA drive on SATA cable bridge transfers to udma5, 200 sectors */ if (ata_dev_knobble(dev)) { @@ -2589,13 +2406,6 @@ int ata_dev_configure(struct ata_device *dev) dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, dev->max_sectors); - if (ata_dev_blacklisted(dev) & ATA_HORKAGE_LPM) { - dev->horkage |= ATA_HORKAGE_LPM; - - /* reset link pm_policy for this port to no pm */ - ap->lpm_policy = ATA_LPM_MAX_POWER; - } - if (ap->ops->dev_config) ap->ops->dev_config(dev); @@ -5495,12 +5305,6 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg) int rc; /* - * disable link pm on all ports before requesting - * any pm activity - */ - ata_lpm_enable(host); - - /* * On some hardware, device fails to respond after spun down * for suspend. As the device won't be used before being * resumed, we don't need to touch the device. Ask EH to skip @@ -5533,9 +5337,6 @@ void ata_host_resume(struct ata_host *host) ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET, ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); host->dev->power.power_state = PMSG_ON; - - /* reenable link pm */ - ata_lpm_disable(host); } #endif @@ -6096,7 +5897,7 @@ static void async_port_probe(void *data, async_cookie_t cookie) spin_lock_irqsave(ap->lock, flags); ehi->probe_mask |= ATA_ALL_DEVICES; - ehi->action |= ATA_EH_RESET | ATA_EH_LPM; + ehi->action |= ATA_EH_RESET; ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; ap->pflags &= ~ATA_PFLAG_INITIALIZING; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 96aa75ddf87f..a645cd3ab163 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1580,9 +1580,9 @@ static void ata_eh_analyze_serror(struct ata_link *link) * host links. For disabled PMP links, only N bit is * considered as X bit is left at 1 for link plugging. */ - hotplug_mask = 0; - - if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link)) + if (link->lpm_policy != ATA_LPM_MAX_POWER) + hotplug_mask = 0; /* hotplug doesn't work w/ LPM */ + else if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link)) hotplug_mask = SERR_PHYRDY_CHG | SERR_DEV_XCHG; else hotplug_mask = SERR_PHYRDY_CHG; @@ -2784,8 +2784,9 @@ int ata_eh_reset(struct ata_link *link, int classify, ata_eh_done(link, NULL, ATA_EH_RESET); if (slave) ata_eh_done(slave, NULL, ATA_EH_RESET); - ehc->last_reset = jiffies; /* update to completion time */ + ehc->last_reset = jiffies; /* update to completion time */ ehc->i.action |= ATA_EH_REVALIDATE; + link->lpm_policy = ATA_LPM_UNKNOWN; /* reset LPM state */ rc = 0; out: @@ -3211,6 +3212,121 @@ static int ata_eh_maybe_retry_flush(struct ata_device *dev) return rc; } +/** + * ata_eh_set_lpm - configure SATA interface power management + * @link: link to configure power management + * @policy: the link power management policy + * @r_failed_dev: out parameter for failed device + * + * Enable SATA Interface power management. This will enable + * Device Interface Power Management (DIPM) for min_power + * policy, and then call driver specific callbacks for + * enabling Host Initiated Power management. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + struct ata_device **r_failed_dev) +{ + struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL; + unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM; + unsigned int err_mask; + int rc; + + /* if the link or host doesn't do LPM, noop */ + if ((link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm)) + return 0; + + /* + * DIPM is enabled only for MIN_POWER as some devices + * misbehave when the host NACKs transition to SLUMBER. Order + * device and link configurations such that the host always + * allows DIPM requests. + */ + ata_for_each_dev(dev, link, ENABLED) { + bool hipm = ata_id_has_hipm(dev->id); + bool dipm = ata_id_has_dipm(dev->id); + + /* find the first enabled and LPM enabled devices */ + if (!link_dev) + link_dev = dev; + + if (!lpm_dev && (hipm || dipm)) + lpm_dev = dev; + + hints &= ~ATA_LPM_EMPTY; + if (!hipm) + hints &= ~ATA_LPM_HIPM; + + /* disable DIPM before changing link config */ + if (policy != ATA_LPM_MIN_POWER && dipm) { + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_DISABLE, SATA_DIPM); + if (err_mask && err_mask != AC_ERR_DEV) { + ata_dev_printk(dev, KERN_WARNING, + "failed to disable DIPM, Emask 0x%x\n", + err_mask); + rc = -EIO; + goto fail; + } + } + } + + rc = ap->ops->set_lpm(link, policy, hints); + if (!rc && ap->slave_link) + rc = ap->ops->set_lpm(ap->slave_link, policy, hints); + + /* + * Attribute link config failure to the first (LPM) enabled + * device on the link. + */ + if (rc) { + if (rc == -EOPNOTSUPP) { + link->flags |= ATA_LFLAG_NO_LPM; + return 0; + } + dev = lpm_dev ? lpm_dev : link_dev; + goto fail; + } + + /* host config updated, enable DIPM if transitioning to MIN_POWER */ + ata_for_each_dev(dev, link, ENABLED) { + if (policy == ATA_LPM_MIN_POWER && ata_id_has_dipm(dev->id)) { + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_ENABLE, SATA_DIPM); + if (err_mask && err_mask != AC_ERR_DEV) { + ata_dev_printk(dev, KERN_WARNING, + "failed to enable DIPM, Emask 0x%x\n", + err_mask); + rc = -EIO; + goto fail; + } + } + } + + link->lpm_policy = policy; + if (ap && ap->slave_link) + ap->slave_link->lpm_policy = policy; + return 0; + +fail: + /* if no device or only one more chance is left, disable LPM */ + if (!dev || ehc->tries[dev->devno] <= 2) { + ata_link_printk(link, KERN_WARNING, + "disabling LPM on the link\n"); + link->flags |= ATA_LFLAG_NO_LPM; + } + if (r_failed_dev) + *r_failed_dev = dev; + return rc; +} + static int ata_link_nr_enabled(struct ata_link *link) { struct ata_device *dev; @@ -3295,6 +3411,10 @@ static int ata_eh_schedule_probe(struct ata_device *dev) ehc->saved_xfer_mode[dev->devno] = 0; ehc->saved_ncq_enabled &= ~(1 << dev->devno); + /* the link maybe in a deep sleep, wake it up */ + if (link->lpm_policy > ATA_LPM_MAX_POWER) + link->ap->ops->set_lpm(link, ATA_LPM_MAX_POWER, ATA_LPM_EMPTY); + /* Record and count probe trials on the ering. The specific * error mask used is irrelevant. Because a successful device * detection clears the ering, this count accumulates only if @@ -3396,8 +3516,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, { struct ata_link *link; struct ata_device *dev; - int nr_failed_devs; - int rc; + int rc, nr_fails; unsigned long flags, deadline; DPRINTK("ENTER\n"); @@ -3438,7 +3557,6 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, retry: rc = 0; - nr_failed_devs = 0; /* if UNLOADING, finish immediately */ if (ap->pflags & ATA_PFLAG_UNLOADING) @@ -3523,13 +3641,17 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, } /* the rest */ - ata_for_each_link(link, ap, EDGE) { + nr_fails = 0; + ata_for_each_link(link, ap, PMP_FIRST) { struct ata_eh_context *ehc = &link->eh_context; + if (sata_pmp_attached(ap) && ata_is_host_link(link)) + goto config_lpm; + /* revalidate existing devices and attach new ones */ rc = ata_eh_revalidate_and_attach(link, &dev); if (rc) - goto dev_fail; + goto rest_fail; /* if PMP got attached, return, pmp EH will take care of it */ if (link->device->class == ATA_DEV_PMP) { @@ -3541,7 +3663,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, if (ehc->i.flags & ATA_EHI_SETMODE) { rc = ata_set_mode(link, &dev); if (rc) - goto dev_fail; + goto rest_fail; ehc->i.flags &= ~ATA_EHI_SETMODE; } @@ -3554,7 +3676,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, continue; rc = atapi_eh_clear_ua(dev); if (rc) - goto dev_fail; + goto rest_fail; } } @@ -3564,21 +3686,25 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, continue; rc = ata_eh_maybe_retry_flush(dev); if (rc) - goto dev_fail; + goto rest_fail; } + config_lpm: /* configure link power saving */ - if (ehc->i.action & ATA_EH_LPM) - ata_for_each_dev(dev, link, ALL) - ata_dev_enable_pm(dev, ap->lpm_policy); + if (link->lpm_policy != ap->target_lpm_policy) { + rc = ata_eh_set_lpm(link, ap->target_lpm_policy, &dev); + if (rc) + goto rest_fail; + } /* this link is okay now */ ehc->i.flags = 0; continue; -dev_fail: - nr_failed_devs++; - ata_eh_handle_dev_fail(dev, rc); + rest_fail: + nr_fails++; + if (dev) + ata_eh_handle_dev_fail(dev, rc); if (ap->pflags & ATA_PFLAG_FROZEN) { /* PMP reset requires working host port. @@ -3590,7 +3716,7 @@ dev_fail: } } - if (nr_failed_devs) + if (nr_fails) goto retry; out: diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index aa56681f68db..56f6224fd6e6 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -117,6 +117,7 @@ static ssize_t ata_scsi_lpm_store(struct device *dev, struct Scsi_Host *shost = class_to_shost(dev); struct ata_port *ap = ata_shost_to_port(shost); enum ata_lpm_policy policy; + unsigned long flags; /* UNKNOWN is internal state, iterate from MAX_POWER */ for (policy = ATA_LPM_MAX_POWER; @@ -129,7 +130,11 @@ static ssize_t ata_scsi_lpm_store(struct device *dev, if (policy == ARRAY_SIZE(ata_lpm_policy_names)) return -EINVAL; - ata_lpm_schedule(ap, policy); + spin_lock_irqsave(ap->lock, flags); + ap->target_lpm_policy = policy; + ata_port_schedule_eh(ap); + spin_unlock_irqrestore(ap->lock, flags); + return count; } @@ -139,11 +144,11 @@ static ssize_t ata_scsi_lpm_show(struct device *dev, struct Scsi_Host *shost = class_to_shost(dev); struct ata_port *ap = ata_shost_to_port(shost); - if (ap->lpm_policy >= ARRAY_SIZE(ata_lpm_policy_names)) + if (ap->target_lpm_policy >= ARRAY_SIZE(ata_lpm_policy_names)) return -EINVAL; return snprintf(buf, PAGE_SIZE, "%s\n", - ata_lpm_policy_names[ap->lpm_policy]); + ata_lpm_policy_names[ap->target_lpm_policy]); } DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR, ata_scsi_lpm_show, ata_scsi_lpm_store); diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 65b6a73c3ac7..55a6f413a550 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -102,10 +102,6 @@ extern int sata_link_init_spd(struct ata_link *link); extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); extern struct ata_port *ata_port_alloc(struct ata_host *host); -extern void ata_dev_enable_pm(struct ata_device *dev, - enum ata_lpm_policy policy); -extern void ata_lpm_schedule(struct ata_port *ap, - enum ata_lpm_policy policy); extern const char *sata_spd_string(unsigned int spd); /* libata-acpi.c */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 7770eeb21039..bc4ee218b185 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -172,6 +172,7 @@ enum { ATA_LFLAG_NO_RETRY = (1 << 5), /* don't retry this link */ ATA_LFLAG_DISABLED = (1 << 6), /* link is disabled */ ATA_LFLAG_SW_ACTIVITY = (1 << 7), /* keep activity stats */ + ATA_LFLAG_NO_LPM = (1 << 8), /* disable LPM on this link */ /* struct ata_port flags */ ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */ @@ -324,12 +325,11 @@ enum { ATA_EH_HARDRESET = (1 << 2), /* meaningful only in ->prereset */ ATA_EH_RESET = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, ATA_EH_ENABLE_LINK = (1 << 3), - ATA_EH_LPM = (1 << 4), /* link power management action */ ATA_EH_PARK = (1 << 5), /* unload heads and stop I/O */ ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_PARK, ATA_EH_ALL_ACTIONS = ATA_EH_REVALIDATE | ATA_EH_RESET | - ATA_EH_ENABLE_LINK | ATA_EH_LPM, + ATA_EH_ENABLE_LINK, /* ata_eh_info->flags */ ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */ @@ -377,7 +377,6 @@ enum { ATA_HORKAGE_BROKEN_HPA = (1 << 4), /* Broken HPA */ ATA_HORKAGE_DISABLE = (1 << 5), /* Disable it */ ATA_HORKAGE_HPA_SIZE = (1 << 6), /* native size off by one */ - ATA_HORKAGE_LPM = (1 << 7), /* Link PM problems */ ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */ ATA_HORKAGE_STUCK_ERR = (1 << 9), /* stuck ERR on next PACKET */ ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */ @@ -475,6 +474,11 @@ enum ata_lpm_policy { ATA_LPM_MIN_POWER, }; +enum ata_lpm_hints { + ATA_LPM_EMPTY = (1 << 0), /* port empty/probing */ + ATA_LPM_HIPM = (1 << 1), /* may use HIPM */ +}; + /* forward declarations */ struct scsi_device; struct ata_port_operations; @@ -702,6 +706,7 @@ struct ata_link { unsigned int hw_sata_spd_limit; unsigned int sata_spd_limit; unsigned int sata_spd; /* current SATA PHY speed */ + enum ata_lpm_policy lpm_policy; /* record runtime error info, protected by host_set lock */ struct ata_eh_info eh_info; @@ -773,7 +778,7 @@ struct ata_port { pm_message_t pm_mesg; int *pm_result; - enum ata_lpm_policy lpm_policy; + enum ata_lpm_policy target_lpm_policy; struct timer_list fastdrain_timer; unsigned long fastdrain_cnt; @@ -839,8 +844,8 @@ struct ata_port_operations { int (*scr_write)(struct ata_link *link, unsigned int sc_reg, u32 val); void (*pmp_attach)(struct ata_port *ap); void (*pmp_detach)(struct ata_port *ap); - int (*enable_pm)(struct ata_port *ap, enum ata_lpm_policy policy); - void (*disable_pm)(struct ata_port *ap); + int (*set_lpm)(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints); /* * Start, stop, suspend and resume |