diff options
| -rw-r--r-- | arch/arm/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/Kconfig | 12 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/h3600.c | 392 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/include/mach/h3600.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/include/mach/h3600_gpio.h | 463 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/include/mach/irqs.h | 22 | ||||
| -rw-r--r-- | drivers/video/sa1100fb.c | 21 |
7 files changed, 3 insertions, 911 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5e0c5ab9560d..12abdd43201f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1093,7 +1093,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_SA1100 bool - depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT) + depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT) default y config CPU_FREQ_SA1110 diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index f99d9013905f..bfc38e315187 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -71,19 +71,9 @@ config SA1100_H3600 <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600> <http://www.compaq.com/products/handhelds/pocketpc/> -config SA1100_H3800 - bool "Compaq iPAQ H3800" - help - Say Y here if you intend to run this kernel on the Compaq iPAQ H3800 - series handheld computer. Information about this machine and the - Linux port to this machine can be found at: - - <http://www.handhelds.org/Compaq/index.html#iPAQ_H3800> - <http://www.compaq.com/products/handhelds/pocketpc/> - config SA1100_H3XXX bool - depends on SA1100_H3100 || SA1100_H3600 || SA1100_H3800 + depends on SA1100_H3100 || SA1100_H3600 default y config SA1100_BADGE4 diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index af25a78d705d..b9aaa45c6ca4 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -42,14 +42,7 @@ #include <asm/mach/serial_sa1100.h> #include <mach/h3600.h> - -#if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100) #include <mach/h3600_gpio.h> -#endif - -#ifdef CONFIG_SA1100_H3800 -#include <mach/h3600_asic.h> -#endif #include "generic.h" @@ -519,388 +512,3 @@ MACHINE_END #endif /* CONFIG_SA1100_H3600 */ -#ifdef CONFIG_SA1100_H3800 - -#define SET_ASIC1(x) \ - do {if (setp) { H3800_ASIC1_GPIO_OUT |= (x); } else { H3800_ASIC1_GPIO_OUT &= ~(x); }} while(0) - -#define SET_ASIC2(x) \ - do {if (setp) { H3800_ASIC2_GPIOPIOD |= (x); } else { H3800_ASIC2_GPIOPIOD &= ~(x); }} while(0) - -#define CLEAR_ASIC1(x) \ - do {if (setp) { H3800_ASIC1_GPIO_OUT &= ~(x); } else { H3800_ASIC1_GPIO_OUT |= (x); }} while(0) - -#define CLEAR_ASIC2(x) \ - do {if (setp) { H3800_ASIC2_GPIOPIOD &= ~(x); } else { H3800_ASIC2_GPIOPIOD |= (x); }} while(0) - - -/* - On screen enable, we get - - h3800_video_power_on(1) - LCD controller starts - h3800_video_lcd_enable(1) - - On screen disable, we get - - h3800_video_lcd_enable(0) - LCD controller stops - h3800_video_power_on(0) -*/ - - -static void h3800_video_power_on(int setp) -{ - if (setp) { - H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_ON; - msleep(30); - H3800_ASIC1_GPIO_OUT |= GPIO1_VGL_ON; - msleep(5); - H3800_ASIC1_GPIO_OUT |= GPIO1_VGH_ON; - msleep(50); - H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_5V_ON; - msleep(5); - } else { - msleep(5); - H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_5V_ON; - msleep(50); - H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGL_ON; - msleep(5); - H3800_ASIC1_GPIO_OUT &= ~GPIO1_VGH_ON; - msleep(100); - H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_ON; - } -} - -static void h3800_video_lcd_enable(int setp) -{ - if (setp) { - msleep(17); // Wait one from before turning on - H3800_ASIC1_GPIO_OUT |= GPIO1_LCD_PCI; - } else { - H3800_ASIC1_GPIO_OUT &= ~GPIO1_LCD_PCI; - msleep(30); // Wait before turning off - } -} - - -static void h3800_control_egpio(enum ipaq_egpio_type x, int setp) -{ - switch (x) { - case IPAQ_EGPIO_LCD_POWER: - h3800_video_power_on(setp); - break; - case IPAQ_EGPIO_LCD_ENABLE: - h3800_video_lcd_enable(setp); - break; - case IPAQ_EGPIO_CODEC_NRESET: - case IPAQ_EGPIO_AUDIO_ON: - case IPAQ_EGPIO_QMUTE: - printk("%s: error - should not be called\n", __func__); - break; - case IPAQ_EGPIO_OPT_NVRAM_ON: - SET_ASIC2(GPIO2_OPT_ON_NVRAM); - break; - case IPAQ_EGPIO_OPT_ON: - SET_ASIC2(GPIO2_OPT_ON); - break; - case IPAQ_EGPIO_CARD_RESET: - SET_ASIC2(GPIO2_OPT_PCM_RESET); - break; - case IPAQ_EGPIO_OPT_RESET: - SET_ASIC2(GPIO2_OPT_RESET); - break; - case IPAQ_EGPIO_IR_ON: - CLEAR_ASIC1(GPIO1_IR_ON_N); - break; - case IPAQ_EGPIO_IR_FSEL: - break; - case IPAQ_EGPIO_RS232_ON: - SET_ASIC1(GPIO1_RS232_ON); - break; - case IPAQ_EGPIO_VPP_ON: - H3800_ASIC2_FlashWP_VPP_ON = setp; - break; - } -} - -static unsigned long h3800_read_egpio(void) -{ - return H3800_ASIC1_GPIO_OUT | (H3800_ASIC2_GPIOPIOD << 16); -} - -/* We need to fix ASIC2 GPIO over suspend/resume. At the moment, - it doesn't appear that ASIC1 GPIO has the same problem */ - -static int h3800_pm_callback(int req) -{ - static u16 asic1_data; - static u16 asic2_data; - int result = 0; - - printk("%s %d\n", __func__, req); - - switch (req) { - case PM_RESUME: - MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000; /* Set MSC2 correctly */ - - H3800_ASIC2_GPIOPIOD = asic2_data; - H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ - | GPIO2_SD_DETECT - | GPIO2_EAR_IN_N - | GPIO2_USB_DETECT_N - | GPIO2_SD_CON_SLT; - - H3800_ASIC1_GPIO_OUT = asic1_data; - - if (ipaq_model_ops.pm_callback_aux) - result = ipaq_model_ops.pm_callback_aux(req); - break; - - case PM_SUSPEND: - if (ipaq_model_ops.pm_callback_aux && - ((result = ipaq_model_ops.pm_callback_aux(req)) != 0)) - return result; - - asic1_data = H3800_ASIC1_GPIO_OUT; - asic2_data = H3800_ASIC2_GPIOPIOD; - break; - default: - printk("%s: unrecognized PM callback\n", __func__); - break; - } - return result; -} - -static struct ipaq_model_ops h3800_model_ops __initdata = { - .generic_name = "3800", - .control = h3800_control_egpio, - .read = h3800_read_egpio, - .pm_callback = h3800_pm_callback -}; - -#define MAX_ASIC_ISR_LOOPS 20 - -/* The order of these is important - see #include <mach/irqs.h> */ -static u32 kpio_irq_mask[] = { - KPIO_KEY_ALL, - KPIO_SPI_INT, - KPIO_OWM_INT, - KPIO_ADC_INT, - KPIO_UART_0_INT, - KPIO_UART_1_INT, - KPIO_TIMER_0_INT, - KPIO_TIMER_1_INT, - KPIO_TIMER_2_INT -}; - -static u32 gpio_irq_mask[] = { - GPIO2_PEN_IRQ, - GPIO2_SD_DETECT, - GPIO2_EAR_IN_N, - GPIO2_USB_DETECT_N, - GPIO2_SD_CON_SLT, -}; - -static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc) -{ - int i; - - if (0) printk("%s: interrupt received\n", __func__); - - desc->chip->ack(irq); - - for (i = 0; i < MAX_ASIC_ISR_LOOPS && (GPLR & GPIO_H3800_ASIC); i++) { - u32 irq; - int j; - - /* KPIO */ - irq = H3800_ASIC2_KPIINTFLAG; - if (0) printk("%s KPIO 0x%08X\n", __func__, irq); - for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++) - if (irq & kpio_irq_mask[j]) - handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j); - - /* GPIO2 */ - irq = H3800_ASIC2_GPIINTFLAG; - if (0) printk("%s GPIO 0x%08X\n", __func__, irq); - for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++) - if (irq & gpio_irq_mask[j]) - handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j); - } - - if (i >= MAX_ASIC_ISR_LOOPS) - printk("%s: interrupt processing overrun\n", __func__); - - /* For level-based interrupts */ - desc->chip->unmask(irq); - -} - -static struct irqaction h3800_irq = { - .name = "h3800_asic", - .handler = h3800_IRQ_demux, - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, -}; - -u32 kpio_int_shadow = 0; - - -/* mask_ack <- IRQ is first serviced. - mask <- IRQ is disabled. - unmask <- IRQ is enabled - - The INTCLR registers are poorly documented. I believe that writing - a "1" to the register clears the specific interrupt, but the documentation - indicates writing a "0" clears the interrupt. In any case, they shouldn't - be read (that's the INTFLAG register) - */ - -static void h3800_mask_ack_kpio_irq(unsigned int irq) -{ - u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START]; - kpio_int_shadow &= ~mask; - H3800_ASIC2_KPIINTSTAT = kpio_int_shadow; - H3800_ASIC2_KPIINTCLR = mask; -} - -static void h3800_mask_kpio_irq(unsigned int irq) -{ - u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START]; - kpio_int_shadow &= ~mask; - H3800_ASIC2_KPIINTSTAT = kpio_int_shadow; -} - -static void h3800_unmask_kpio_irq(unsigned int irq) -{ - u32 mask = kpio_irq_mask[irq - H3800_KPIO_IRQ_START]; - kpio_int_shadow |= mask; - H3800_ASIC2_KPIINTSTAT = kpio_int_shadow; -} - -static void h3800_mask_ack_gpio_irq(unsigned int irq) -{ - u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START]; - H3800_ASIC2_GPIINTSTAT &= ~mask; - H3800_ASIC2_GPIINTCLR = mask; -} - -static void h3800_mask_gpio_irq(unsigned int irq) -{ - u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START]; - H3800_ASIC2_GPIINTSTAT &= ~mask; - } - -static void h3800_unmask_gpio_irq(unsigned int irq) -{ - u32 mask = gpio_irq_mask[irq - H3800_GPIO_IRQ_START]; - H3800_ASIC2_GPIINTSTAT |= mask; -} - -static void __init h3800_init_irq(void) -{ - int i; - - /* Initialize standard IRQs */ - sa1100_init_irq(); - - /* Disable all IRQs and set up clock */ - H3800_ASIC2_KPIINTSTAT = 0; /* Disable all interrupts */ - H3800_ASIC2_GPIINTSTAT = 0; - - H3800_ASIC2_KPIINTCLR = 0; /* Clear all KPIO interrupts */ - H3800_ASIC2_GPIINTCLR = 0; /* Clear all GPIO interrupts */ - -// H3800_ASIC2_KPIINTCLR = 0xffff; /* Clear all KPIO interrupts */ -// H3800_ASIC2_GPIINTCLR = 0xffff; /* Clear all GPIO interrupts */ - - H3800_ASIC2_CLOCK_Enable |= ASIC2_CLOCK_EX0; /* 32 kHZ crystal on */ - H3800_ASIC2_INTR_ClockPrescale |= ASIC2_INTCPS_SET; - H3800_ASIC2_INTR_ClockPrescale = ASIC2_INTCPS_CPS(0x0e) | ASIC2_INTCPS_SET; - H3800_ASIC2_INTR_TimerSet = 1; - -#if 0 - for (i = 0; i < H3800_KPIO_IRQ_COUNT; i++) { - int irq = i + H3800_KPIO_IRQ_START; - irq_desc[irq].valid = 1; - irq_desc[irq].probe_ok = 1; - set_irq_chip(irq, &h3800_kpio_irqchip); - } - - for (i = 0; i < H3800_GPIO_IRQ_COUNT; i++) { - int irq = i + H3800_GPIO_IRQ_START; - irq_desc[irq].valid = 1; - irq_desc[irq].probe_ok = 1; - set_irq_chip(irq, &h3800_gpio_irqchip); - } -#endif - set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING); - set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux); -} - - -#define ASIC1_OUTPUTS 0x7fff /* First 15 bits are used */ - -static void __init h3800_map_io(void) -{ - h3xxx_map_io(); - - /* Add wakeup on AC plug/unplug */ - PWER |= PWER_GPIO12; - - /* Initialize h3800-specific values here */ - GPCR = 0x0fffffff; /* All outputs are set low by default */ - GAFR = GPIO_H3800_CLK_OUT | - GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 | - GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8; - GPDR = GPIO_H3800_CLK_OUT | - GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK | - GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA | - GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 | - GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8; - TUCR = TUCR_3_6864MHz; /* Seems to be used only for the Bluetooth UART */ - - /* Fix the memory bus */ - MSC2 = (MSC2 & 0x0000ffff) | 0xE4510000; - - /* Set up ASIC #1 */ - H3800_ASIC1_GPIO_DIR = ASIC1_OUTPUTS; /* All outputs */ - H3800_ASIC1_GPIO_MASK = ASIC1_OUTPUTS; /* No interrupts */ - H3800_ASIC1_GPIO_SLEEP_MASK = ASIC1_OUTPUTS; - H3800_ASIC1_GPIO_SLEEP_DIR = ASIC1_OUTPUTS; - H3800_ASIC1_GPIO_SLEEP_OUT = GPIO1_EAR_ON_N; - H3800_ASIC1_GPIO_BATT_FAULT_DIR = ASIC1_OUTPUTS; - H3800_ASIC1_GPIO_BATT_FAULT_OUT = GPIO1_EAR_ON_N; - - H3800_ASIC1_GPIO_OUT = GPIO1_IR_ON_N - | GPIO1_RS232_ON - | GPIO1_EAR_ON_N; - - /* Set up ASIC #2 */ - H3800_ASIC2_GPIOPIOD = GPIO2_IN_Y1_N | GPIO2_IN_X1_N; - H3800_ASIC2_GPOBFSTAT = GPIO2_IN_Y1_N | GPIO2_IN_X1_N; - - H3800_ASIC2_GPIODIR = GPIO2_PEN_IRQ - | GPIO2_SD_DETECT - | GPIO2_EAR_IN_N - | GPIO2_USB_DETECT_N - | GPIO2_SD_CON_SLT; - - /* TODO : Set sleep states & battery fault states */ - - /* Clear VPP Enable */ - H3800_ASIC2_FlashWP_VPP_ON = 0; - ipaq_model_ops = h3800_model_ops; -} - -MACHINE_START(H3800, "Compaq iPAQ H3800") - .phys_io = 0x80000000, - .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, - .boot_params = 0xc0000100, - .map_io = h3800_map_io, - .init_irq = h3800_init_irq, - .timer = &sa1100_timer, - .init_machine = h3xxx_mach_init, -MACHINE_END - -#endif /* CONFIG_SA1100_H3800 */ diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h index 9cc47fddb335..e692ab3dd79f 100644 --- a/arch/arm/mach-sa1100/include/mach/h3600.h +++ b/arch/arm/mach-sa1100/include/mach/h3600.h @@ -29,7 +29,7 @@ typedef int __bitwise pm_request_t; #define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */ /* generalized support for H3xxx series Compaq Pocket PC's */ -#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800()) +#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600()) /* Physical memory regions corresponding to chip selects */ #define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000) diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h index 62b0b7879685..a36ca76d018b 100644 --- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h +++ b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h @@ -48,22 +48,11 @@ #define GPIO_H3600_OPT_LOCK GPIO_GPIO (22) #define GPIO_H3600_OPT_DET GPIO_GPIO (27) -/* H3800 specific pins */ -#define GPIO_H3800_AC_IN GPIO_GPIO (12) -#define GPIO_H3800_COM_DSR GPIO_GPIO (13) -#define GPIO_H3800_MMC_INT GPIO_GPIO (18) -#define GPIO_H3800_NOPT_IND GPIO_GPIO (20) /* Almost exactly the same as GPIO_H3600_OPT_DET */ -#define GPIO_H3800_OPT_BAT_FAULT GPIO_GPIO (22) -#define GPIO_H3800_CLK_OUT GPIO_GPIO (27) - /****************************************************/ #define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18 #define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27 -#define IRQ_GPIO_H3800_MMC_INT IRQ_GPIO18 -#define IRQ_GPIO_H3800_NOPT_IND IRQ_GPIO20 /* almost same as OPT_DET */ - /* H3100 / 3600 EGPIO pins */ #define EGPIO_H3600_VPP_ON (1 << 0) #define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */ @@ -84,457 +73,5 @@ #define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */ #define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */ -/********************* H3800, ASIC #2 ********************/ - -#define _H3800_ASIC2_Base (H3600_EGPIO_VIRT) -#define H3800_ASIC2_OFFSET(s,x,y) \ - (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y))) -#define H3800_ASIC2_NOFFSET(s,x,n,y) \ - (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y))) - -#define _H3800_ASIC2_GPIO_Base 0x0000 -#define _H3800_ASIC2_GPIO_Direction 0x0000 /* R/W, 16 bits 1:input, 0:output */ -#define _H3800_ASIC2_GPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */ -#define _H3800_ASIC2_GPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */ -#define _H3800_ASIC2_GPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */ -#define _H3800_ASIC2_GPIO_InterruptClear 0x0010 /* W, 12 bits */ -#define _H3800_ASIC2_GPIO_InterruptFlag 0x0010 /* R, 12 bits - reads int status */ -#define _H3800_ASIC2_GPIO_Data 0x0014 /* R/W, 16 bits */ -#define _H3800_ASIC2_GPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */ -#define _H3800_ASIC2_GPIO_InterruptEnable 0x001c /* R/W, 12 bits 1:enable interrupt */ -#define _H3800_ASIC2_GPIO_Alternate 0x003c /* R/W, 12+1 bits - set alternate functions */ - -#define H3800_ASIC2_GPIO_Direction H3800_ASIC2_OFFSET( u16, GPIO, Direction ) -#define H3800_ASIC2_GPIO_InterruptType H3800_ASIC2_OFFSET( u16, GPIO, InterruptType ) -#define H3800_ASIC2_GPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType ) -#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType ) -#define H3800_ASIC2_GPIO_InterruptClear H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear ) -#define H3800_ASIC2_GPIO_InterruptFlag H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag ) -#define H3800_ASIC2_GPIO_Data H3800_ASIC2_OFFSET( u16, GPIO, Data ) -#define H3800_ASIC2_GPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut ) -#define H3800_ASIC2_GPIO_InterruptEnable H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable ) -#define H3800_ASIC2_GPIO_Alternate H3800_ASIC2_OFFSET( u16, GPIO, Alternate ) - -#define GPIO_H3800_ASIC2_IN_Y1_N (1 << 0) /* Output: Touchscreen Y1 */ -#define GPIO_H3800_ASIC2_IN_X0 (1 << 1) /* Output: Touchscreen X0 */ -#define GPIO_H3800_ASIC2_IN_Y0 (1 << 2) /* Output: Touchscreen Y0 */ -#define GPIO_H3800_ASIC2_IN_X1_N (1 << 3) /* Output: Touchscreen X1 */ -#define GPIO_H3800_ASIC2_BT_RST (1 << 4) /* Output: Bluetooth reset */ -#define GPIO_H3800_ASIC2_PEN_IRQ (1 << 5) /* Input : Pen down */ -#define GPIO_H3800_ASIC2_SD_DETECT (1 << 6) /* Input : SD detect */ -#define GPIO_H3800_ASIC2_EAR_IN_N (1 << 7) /* Input : Audio jack plug inserted */ -#define GPIO_H3800_ASIC2_OPT_PCM_RESET (1 << 8) /* Output: */ -#define GPIO_H3800_ASIC2_OPT_RESET (1 << 9) /* Output: */ -#define GPIO_H3800_ASIC2_USB_DETECT_N (1 << 10) /* Input : */ -#define GPIO_H3800_ASIC2_SD_CON_SLT (1 << 11) /* Input : */ - -#define _H3800_ASIC2_KPIO_Base 0x0200 -#define _H3800_ASIC2_KPIO_Direction 0x0000 /* R/W, 12 bits 1:input, 0:output */ -#define _H3800_ASIC2_KPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */ -#define _H3800_ASIC2_KPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */ -#define _H3800_ASIC2_KPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */ -#define _H3800_ASIC2_KPIO_InterruptClear 0x0010 /* W, 20 bits - 8 special */ -#define _H3800_ASIC2_KPIO_InterruptFlag 0x0010 /* R, 20 bits - 8 special - reads int status */ -#define _H3800_ASIC2_KPIO_Data 0x0014 /* R/W, 16 bits */ -#define _H3800_ASIC2_KPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */ -#define _H3800_ASIC2_KPIO_InterruptEnable 0x001c /* R/W, 20 bits - 8 special */ -#define _H3800_ASIC2_KPIO_Alternate 0x003c /* R/W, 6 bits */ - -#define H3800_ASIC2_KPIO_Direction H3800_ASIC2_OFFSET( u16, KPIO, Direction ) -#define H3800_ASIC2_KPIO_InterruptType H3800_ASIC2_OFFSET( u16, KPIO, InterruptType ) -#define H3800_ASIC2_KPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType ) -#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType ) -#define H3800_ASIC2_KPIO_InterruptClear H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear ) -#define H3800_ASIC2_KPIO_InterruptFlag H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag ) -#define H3800_ASIC2_KPIO_Data H3800_ASIC2_OFFSET( u16, KPIO, Data ) -#define H3800_ASIC2_KPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut ) -#define H3800_ASIC2_KPIO_InterruptEnable H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable ) -#define H3800_ASIC2_KPIO_Alternate H3800_ASIC2_OFFSET( u16, KPIO, Alternate ) - -#define H3800_ASIC2_KPIO_SPI_INT ( 1 << 16 ) -#define H3800_ASIC2_KPIO_OWM_INT ( 1 << 17 ) -#define H3800_ASIC2_KPIO_ADC_INT ( 1 << 18 ) -#define H3800_ASIC2_KPIO_UART_0_INT ( 1 << 19 ) -#define H3800_ASIC2_KPIO_UART_1_INT ( 1 << 20 ) -#define H3800_ASIC2_KPIO_TIMER_0_INT ( 1 << 21 ) -#define H3800_ASIC2_KPIO_TIMER_1_INT ( 1 << 22 ) -#define H3800_ASIC2_KPIO_TIMER_2_INT ( 1 << 23 ) - -#define KPIO_H3800_ASIC2_RECORD_BTN_N (1 << 0) /* Record button */ -#define KPIO_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Keypad */ -#define KPIO_H3800_ASIC2_KEY_5W2_N (1 << 2) /* */ -#define KPIO_H3800_ASIC2_KEY_5W3_N (1 << 3) /* */ -#define KPIO_H3800_ASIC2_KEY_5W4_N (1 << 4) /* */ -#define KPIO_H3800_ASIC2_KEY_5W5_N (1 << 5) /* */ -#define KPIO_H3800_ASIC2_KEY_LEFT_N (1 << 6) /* */ -#define KPIO_H3800_ASIC2_KEY_RIGHT_N (1 << 7) /* */ -#define KPIO_H3800_ASIC2_KEY_AP1_N (1 << 8) /* Old "Calendar" */ -#define KPIO_H3800_ASIC2_KEY_AP2_N (1 << 9) /* Old "Schedule" */ -#define KPIO_H3800_ASIC2_KEY_AP3_N (1 << 10) /* Old "Q" */ -#define KPIO_H3800_ASIC2_KEY_AP4_N (1 << 11) /* Old "Undo" */ - -/* Alternate KPIO functions (set by default) */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Action key */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N (1 << 2) /* J1 of keypad input */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N (1 << 3) /* J2 of keypad input */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N (1 << 4) /* J3 of keypad input */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N (1 << 5) /* J4 of keypad input */ - -#define _H3800_ASIC2_SPI_Base 0x0400 -#define _H3800_ASIC2_SPI_Control 0x0000 /* R/W 8 bits */ -#define _H3800_ASIC2_SPI_Data 0x0004 /* R/W 8 bits */ -#define _H3800_ASIC2_SPI_ChipSelectDisabled 0x0008 /* W 8 bits */ - -#define H3800_ASIC2_SPI_Control H3800_ASIC2_OFFSET( u8, SPI, Control ) -#define H3800_ASIC2_SPI_Data H3800_ASIC2_OFFSET( u8, SPI, Data ) -#define H3800_ASIC2_SPI_ChipSelectDisabled H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled ) - -#define _H3800_ASIC2_PWM_0_Base 0x0600 -#define _H3800_ASIC2_PWM_1_Base 0x0700 -#define _H3800_ASIC2_PWM_TimeBase 0x0000 /* R/W 6 bits */ -#define _H3800_ASIC2_PWM_PeriodTime 0x0004 /* R/W 12 bits */ -#define _H3800_ASIC2_PWM_DutyTime 0x0008 /* R/W 12 bits */ - -#define H3800_ASIC2_PWM_0_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 0, TimeBase ) -#define H3800_ASIC2_PWM_0_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime ) -#define H3800_ASIC2_PWM_0_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime ) - -#define H3800_ASIC2_PWM_1_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 1, TimeBase ) -#define H3800_ASIC2_PWM_1_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime ) -#define H3800_ASIC2_PWM_1_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime ) - -#define H3800_ASIC2_PWM_TIMEBASE_MASK 0xf /* Low 4 bits sets time base, max = 8 */ -#define H3800_ASIC2_PWM_TIMEBASE_ENABLE ( 1 << 4 ) /* Enable clock */ -#define H3800_ASIC2_PWM_TIMEBASE_CLEAR ( 1 << 5 ) /* Clear the PWM */ - -#define _H3800_ASIC2_LED_0_Base 0x0800 -#define _H3800_ASIC2_LED_1_Base 0x0880 -#define _H3800_ASIC2_LED_2_Base 0x0900 -#define _H3800_ASIC2_LED_TimeBase 0x0000 /* R/W 7 bits */ -#define _H3800_ASIC2_LED_PeriodTime 0x0004 /* R/W 12 bits */ -#define _H3800_ASIC2_LED_DutyTime 0x0008 /* R/W 12 bits */ -#define _H3800_ASIC2_LED_AutoStopCount 0x000c /* R/W 16 bits */ - -#define H3800_ASIC2_LED_0_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 0, TimeBase ) -#define H3800_ASIC2_LED_0_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime ) -#define H3800_ASIC2_LED_0_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime ) -#define H3800_ASIC2_LED_0_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock ) - -#define H3800_ASIC2_LED_1_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 1, TimeBase ) -#define H3800_ASIC2_LED_1_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime ) -#define H3800_ASIC2_LED_1_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime ) -#define H3800_ASIC2_LED_1_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock ) - -#define H3800_ASIC2_LED_2_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 2, TimeBase ) -#define H3800_ASIC2_LED_2_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime ) -#define H3800_ASIC2_LED_2_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime ) -#define H3800_ASIC2_LED_2_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock ) - -#define H3800_ASIC2_LED_TIMEBASE_MASK 0x0f /* Low 4 bits sets time base, max = 13 */ -#define H3800_ASIC2_LED_TIMEBASE_BLINK ( 1 << 4 ) /* Enable blinking */ -#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP ( 1 << 5 ) -#define H3800_ASIC2_LED_TIMEBASE_ALWAYS ( 1 << 6 ) /* Enable blink always */ - -#define _H3800_ASIC2_UART_0_Base 0x0A00 -#define _H3800_ASIC2_UART_1_Base 0x0C00 -#define _H3800_ASIC2_UART_Receive 0x0000 /* R 8 bits */ -#define _H3800_ASIC2_UART_Transmit 0x0000 /* W 8 bits */ -#define _H3800_ASIC2_UART_IntEnable 0x0004 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_IntVerify 0x0008 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_FIFOControl 0x000c /* R/W 8 bits */ -#define _H3800_ASIC2_UART_LineControl 0x0010 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_ModemStatus 0x0014 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_LineStatus 0x0018 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_ScratchPad 0x001c /* R/W 8 bits */ -#define _H3800_ASIC2_UART_DivisorLatchL 0x0020 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_DivisorLatchH 0x0024 /* R/W 8 bits */ - -#define H3800_ASIC2_UART_0_Receive H3800_ASIC2_NOFFSET( u8, UART, 0, Receive ) -#define H3800_ASIC2_UART_0_Transmit H3800_ASIC2_NOFFSET( u8, UART, 0, Transmit ) -#define H3800_ASIC2_UART_0_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 0, IntEnable ) -#define H3800_ASIC2_UART_0_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 0, IntVerify ) -#define H3800_ASIC2_UART_0_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 0, FIFOControl ) -#define H3800_ASIC2_UART_0_LineControl H3800_ASIC2_NOFFSET( u8, UART, 0, LineControl ) -#define H3800_ASIC2_UART_0_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 0, ModemStatus ) -#define H3800_ASIC2_UART_0_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 0, LineStatus ) -#define H3800_ASIC2_UART_0_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 0, ScratchPad ) -#define H3800_ASIC2_UART_0_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchL ) -#define H3800_ASIC2_UART_0_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchH ) - -#define H3800_ASIC2_UART_1_Receive H3800_ASIC2_NOFFSET( u8, UART, 1, Receive ) -#define H3800_ASIC2_UART_1_Transmit H3800_ASIC2_NOFFSET( u8, UART, 1, Transmit ) -#define H3800_ASIC2_UART_1_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 1, IntEnable ) -#define H3800_ASIC2_UART_1_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 1, IntVerify ) -#define H3800_ASIC2_UART_1_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 1, FIFOControl ) -#define H3800_ASIC2_UART_1_LineControl H3800_ASIC2_NOFFSET( u8, UART, 1, LineControl ) -#define H3800_ASIC2_UART_1_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 1, ModemStatus ) -#define H3800_ASIC2_UART_1_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 1, LineStatus ) -#define H3800_ASIC2_UART_1_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 1, ScratchPad ) -#define H3800_ASIC2_UART_1_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchL ) -#define H3800_ASIC2_UART_1_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchH ) - -#define _H3800_ASIC2_TIMER_Base 0x0E00 -#define _H3800_ASIC2_TIMER_Command 0x0000 /* R/W 8 bits */ - -#define H3800_ASIC2_TIMER_Command H3800_ASIC2_OFFSET( u8, Timer, Command ) - -#define H3800_ASIC2_TIMER_GAT_0 ( 1 << 0 ) /* Gate enable, counter 0 */ -#define H3800_ASIC2_TIMER_GAT_1 ( 1 << 1 ) /* Gate enable, counter 1 */ -#define H3800_ASIC2_TIMER_GAT_2 ( 1 << 2 ) /* Gate enable, counter 2 */ -#define H3800_ASIC2_TIMER_CLK_0 ( 1 << 3 ) /* Clock enable, counter 0 */ -#define H3800_ASIC2_TIMER_CLK_1 ( 1 << 4 ) /* Clock enable, counter 1 */ -#define H3800_ASIC2_TIMER_CLK_2 ( 1 << 5 ) /* Clock enable, counter 2 */ -#define H3800_ASIC2_TIMER_MODE_0 ( 1 << 6 ) /* Mode 0 enable, counter 0 */ -#define H3800_ASIC2_TIMER_MODE_1 ( 1 << 7 ) /* Mode 0 enable, counter 1 */ - -#define _H3800_ASIC2_CLOCK_Base 0x1000 -#define _H3800_ASIC2_CLOCK_Enable 0x0000 /* R/W 18 bits */ - -#define H3800_ASIC2_CLOCK_Enable H3800_ASIC2_OFFSET( u32, CLOCK, Enable ) - -#define H3800_ASIC2_CLOCK_AUDIO_1 0x0001 /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */ -#define H3800_ASIC2_CLOCK_AUDIO_2 0x0002 /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */ -#define H3800_ASIC2_CLOCK_AUDIO_3 0x0004 /* Enable 5.6 MHz clock for 11 kHZ sample rate */ -#define H3800_ASIC2_CLOCK_AUDIO_4 0x0008 /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */ -#define H3800_ASIC2_CLOCK_ADC ( 1 << 4 ) /* 1.024 MHz clock to ADC */ -#define H3800_ASIC2_CLOCK_SPI ( 1 << 5 ) /* 4.096 MHz clock to SPI */ -#define H3800_ASIC2_CLOCK_OWM ( 1 << 6 ) /* 4.096 MHz clock to OWM */ -#define H3800_ASIC2_CLOCK_PWM ( 1 << 7 ) /* 2.048 MHz clock to PWM */ -#define H3800_ASIC2_CLOCK_UART_1 ( 1 << 8 ) /* 24.576 MHz clock to UART1 (turn off bit 16) */ -#define H3800_ASIC2_CLOCK_UART_0 ( 1 << 9 ) /* 24.576 MHz clock to UART0 (turn off bit 17) */ -#define H3800_ASIC2_CLOCK_SD_1 ( 1 << 10 ) /* 16.934 MHz to SD */ -#define H3800_ASIC2_CLOCK_SD_2 ( 2 << 10 ) /* 24.576 MHz to SD */ -#define H3800_ASIC2_CLOCK_SD_3 ( 3 << 10 ) /* 33.869 MHz to SD */ -#define H3800_ASIC2_CLOCK_SD_4 ( 4 << 10 ) /* 49.152 MHz to SD */ -#define H3800_ASIC2_CLOCK_EX0 ( 1 << 13 ) /* Enable 32.768 kHz crystal */ -#define H3800_ASIC2_CLOCK_EX1 ( 1 << 14 ) /* Enable 24.576 MHz crystal */ -#define H3800_ASIC2_CLOCK_EX2 ( 1 << 15 ) /* Enable 33.869 MHz crystal */ -#define H3800_ASIC2_CLOCK_SLOW_UART_1 ( 1 << 16 ) /* Enable 3.686 MHz to UART1 (turn off bit 8) */ -#define H3800_ASIC2_CLOCK_SLOW_UART_0 ( 1 << 17 ) /* Enable 3.686 MHz to UART0 (turn off bit 9) */ - -#define _H3800_ASIC2_ADC_Base 0x1200 -#define _H3800_ASIC2_ADC_Multiplexer 0x0000 /* R/W 4 bits - low 3 bits set channel */ -#define _H3800_ASIC2_ADC_ControlStatus 0x0004 /* R/W 8 bits */ -#define _H3800_ASIC2_ADC_Data 0x0008 /* R 10 bits */ - -#define H3800_ASIC2_ADC_Multiplexer H3800_ASIC2_OFFSET( u8, ADC, Multiplexer ) -#define H3800_ASIC2_ADC_ControlStatus H3800_ASIC2_OFFSET( u8, ADC, ControlStatus ) -#define H3800_ASIC2_ADC_Data H3800_ASIC2_OFFSET( u16, ADC, Data ) - -#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK 0x07 /* Low 3 bits sets channel. max = 4 */ -#define H3600_ASIC2_ADC_MUX_CLKEN ( 1 << 3 ) /* Enable clock */ - -#define H3600_ASIC2_ADC_CSR_ADPS_MASK 0x0f /* Low 4 bits sets prescale, max = 8 */ -#define H3600_ASIC2_ADC_CSR_FREE_RUN ( 1 << 4 ) -#define H3600_ASIC2_ADC_CSR_INT_ENABLE ( 1 << 5 ) -#define H3600_ASIC2_ADC_CSR_START ( 1 << 6 ) /* Set to start conversion. Goes to 0 when done */ -#define H3600_ASIC2_ADC_CSR_ENABLE ( 1 << 7 ) /* 1:power up ADC, 0:power down */ - - -#define _H3800_ASIC2_INTR_Base 0x1600 -#define _H3800_ASIC2_INTR_MaskAndFlag 0x0000 /* R/(W) 8bits */ -#define _H3800_ASIC2_INTR_ClockPrescale 0x0004 /* R/(W) 5bits */ -#define _H3800_ASIC2_INTR_TimerSet 0x0008 /* R/(W) 8bits */ - -#define H3800_ASIC2_INTR_MaskAndFlag H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag ) -#define H3800_ASIC2_INTR_ClockPrescale H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale ) -#define H3800_ASIC2_INTR_TimerSet H3800_ASIC2_OFFSET( u8, INTR, TimerSet ) - -#define H3800_ASIC2_INTR_GLOBAL_MASK ( 1 << 0 ) /* Global interrupt mask */ -#define H3800_ASIC2_INTR_POWER_ON_RESET ( 1 << 1 ) /* 01: Power on reset (bits 1 & 2 ) */ -#define H3800_ASIC2_INTR_EXTERNAL_RESET ( 2 << 1 ) /* 10: External reset (bits 1 & 2 ) */ -#define H3800_ASIC2_INTR_MASK_UART_0 ( 1 << 4 ) -#define H3800_ASIC2_INTR_MASK_UART_1 ( 1 << 5 ) -#define H3800_ASIC2_INTR_MASK_TIMER ( 1 << 6 ) -#define H3800_ASIC2_INTR_MASK_OWM ( 1 << 7 ) - -#define H3800_ASIC2_INTR_CLOCK_PRESCALE 0x0f /* 4 bits, max 14 */ -#define H3800_ASIC2_INTR_SET ( 1 << 4 ) /* Time base enable */ - - -#define _H3800_ASIC2_OWM_Base 0x1800 -#define _H3800_ASIC2_OWM_Command 0x0000 /* R/W 4 bits command register */ -#define _H3800_ASIC2_OWM_Data 0x0004 /* R/W 8 bits, transmit / receive buffer */ -#define _H3800_ASIC2_OWM_Interrupt 0x0008 /* R/W Command register */ -#define _H3800_ASIC2_OWM_InterruptEnable 0x000c /* R/W Command register */ -#define _H3800_ASIC2_OWM_ClockDivisor 0x0010 /* R/W 5 bits of divisor and pre-scale */ - -#define H3800_ASIC2_OWM_Command H3800_ASIC2_OFFSET( u8, OWM, Command ) -#define H3800_ASIC2_OWM_Data H3800_ASIC2_OFFSET( u8, OWM, Data ) -#define H3800_ASIC2_OWM_Interrupt H3800_ASIC2_OFFSET( u8, OWM, Interrupt ) -#define H3800_ASIC2_OWM_InterruptEnable H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable ) -#define H3800_ASIC2_OWM_ClockDivisor H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor ) - -#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 ) /* Set to force reset on 1-wire bus */ -#define H3800_ASIC2_OWM_CMD_SRA ( 1 << 1 ) /* Set to switch to Search ROM accelerator mode */ -#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT ( 1 << 2 ) /* Write only - forces bus low */ -#define H3800_ASIC2_OWM_CMD_DQ_INPUT ( 1 << 3 ) /* Read only - reflects state of bus */ - -#define H3800_ASIC2_OWM_INT_PD ( 1 << 0 ) /* Presence detect */ -#define H3800_ASIC2_OWM_INT_PDR ( 1 << 1 ) /* Presence detect result */ -#define H3800_ASIC2_OWM_INT_TBE ( 1 << 2 ) /* Transmit buffer empty */ -#define H3800_ASIC2_OWM_INT_TEMT ( 1 << 3 ) /* Transmit shift register empty */ -#define H3800_ASIC2_OWM_INT_RBF ( 1 << 4 ) /* Receive buffer full */ - -#define H3800_ASIC2_OWM_INTEN_EPD ( 1 << 0 ) /* Enable receive buffer full interrupt */ -#define H3800_ASIC2_OWM_INTEN_IAS ( 1 << 1 ) /* Enable transmit shift register empty interrupt */ -#define H3800_ASIC2_OWM_INTEN_ETBE ( 1 << 2 ) /* Enable transmit buffer empty interrupt */ -#define H3800_ASIC2_OWM_INTEN_ETMT ( 1 << 3 ) /* INTR active state */ -#define H3800_ASIC2_OWM_INTEN_ERBF ( 1 << 4 ) /* Enable presence detect interrupt */ - -#define _H3800_ASIC2_FlashCtl_Base 0x1A00 - -/****************************************************/ -/* H3800, ASIC #1 - * This ASIC is accesed through ASIC #2, and - * mapped into the 1c00 - 1f00 region - */ - -#define H3800_ASIC1_OFFSET(s,x,y) \ - (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1)))) - -#define _H3800_ASIC1_MMC_Base 0x1c00 - -#define _H3800_ASIC1_MMC_StartStopClock 0x00 /* R/W 8bit */ -#define _H3800_ASIC1_MMC_Status 0x02 /* R See below, default 0x0040 */ -#define _H3800_ASIC1_MMC_ClockRate 0x04 /* R/W 8bit, low 3 bits are clock divisor */ -#define _H3800_ASIC1_MMC_SPIRegister 0x08 /* R/W 8bit, see below */ -#define _H3800_ASIC1_MMC_CmdDataCont 0x0a /* R/W 8bit, write to start MMC adapter */ -#define _H3800_ASIC1_MMC_ResponseTimeout 0x0c /* R/W 8bit, clocks before response timeout */ -#define _H3800_ASIC1_MMC_ReadTimeout 0x0e /* R/W 16bit, clocks before received data timeout */ -#define _H3800_ASIC1_MMC_BlockLength 0x10 /* R/W 10bit */ -#define _H3800_ASIC1_MMC_NumOfBlocks 0x12 /* R/W 16bit, in block mode, number of blocks */ -#define _H3800_ASIC1_MMC_InterruptMask 0x1a /* R/W 8bit */ -#define _H3800_ASIC1_MMC_CommandNumber 0x1c /* R/W 6 bits */ -#define _H3800_ASIC1_MMC_ArgumentH 0x1e /* R/W 16 bits */ -#define _H3800_ASIC1_MMC_ArgumentL 0x20 /* R/W 16 bits */ -#define _H3800_ASIC1_MMC_ResFifo 0x22 /* R 8 x 16 bits - contains response FIFO */ -#define _H3800_ASIC1_MMC_BufferPartFull 0x28 /* R/W 8 bits */ - -#define H3800_ASIC1_MMC_StartStopClock H3800_ASIC1_OFFSET( u8, MMC, StartStopClock ) -#define H3800_ASIC1_MMC_Status H3800_ASIC1_OFFSET( u16, MMC, Status ) -#define H3800_ASIC1_MMC_ClockRate H3800_ASIC1_OFFSET( u8, MMC, ClockRate ) -#define H3800_ASIC1_MMC_SPIRegister H3800_ASIC1_OFFSET( u8, MMC, SPIRegister ) -#define H3800_ASIC1_MMC_CmdDataCont H3800_ASIC1_OFFSET( u8, MMC, CmdDataCont ) -#define H3800_ASIC1_MMC_ResponseTimeout H3800_ASIC1_OFFSET( u8, MMC, ResponseTimeout ) -#define H3800_ASIC1_MMC_ReadTimeout H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout ) -#define H3800_ASIC1_MMC_BlockLength H3800_ASIC1_OFFSET( u16, MMC, BlockLength ) -#define H3800_ASIC1_MMC_NumOfBlocks H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks ) -#define H3800_ASIC1_MMC_InterruptMask H3800_ASIC1_OFFSET( u8, MMC, InterruptMask ) -#define H3800_ASIC1_MMC_CommandNumber H3800_ASIC1_OFFSET( u8, MMC, CommandNumber ) -#define H3800_ASIC1_MMC_ArgumentH H3800_ASIC1_OFFSET( u16, MMC, ArgumentH ) -#define H3800_ASIC1_MMC_ArgumentL H3800_ASIC1_OFFSET( u16, MMC, ArgumentL ) -#define H3800_ASIC1_MMC_ResFifo H3800_ASIC1_OFFSET( u16, MMC, ResFifo ) -#define H3800_ASIC1_MMC_BufferPartFull H3800_ASIC1_OFFSET( u8, MMC, BufferPartFull ) - -#define H3800_ASIC1_MMC_STOP_CLOCK (1 << 0) /* Write to "StartStopClock" register */ -#define H3800_ASIC1_MMC_START_CLOCK (1 << 1) - -#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT (1 << 0) -#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT (1 << 1) -#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR (1 << 2) -#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR (1 << 3) -#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR (1 << 4) /* SPI data token error received */ -#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR (1 << 5) -#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY (1 << 6) -#define H3800_ASIC1_MMC_STATUS_FIFO_FULL (1 << 7) -#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE (1 << 8) /* MultiMediaCard clock stopped */ -#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE (1 << 11) /* Write operation, indicates transfer finished */ -#define H3800_ASIC1_MMC_STATUS_END_PROGRAM (1 << 12) /* End write and read operations */ -#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE (1 << 13) /* End command response */ - -#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE (1 << 0) /* Enables SPI mode */ -#define H3800_ASIC1_MMC_SPI_REG_CRC_ON (1 << 1) /* 1:turn on CRC */ -#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE (1 << 2) /* 1:turn on SPI CS */ -#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK 0x38 /* Bits 3,4,5 are the SPI CS relative address */ - -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE 0x00 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1 0x01 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2 0x02 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3 0x03 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE (1 << 2) /* This command contains a data transfer */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE (1 << 3) /* This data transfer is a write */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE (1 << 4) /* This data transfer is in stream mode */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT (1 << 5) /* Busy signal expected after current cmd */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE (1 << 6) /* Enables the 80 bits for initializing card */ - -#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE (1 << 0) -#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE (1 << 1) -#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE (1 << 2) -#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY (1 << 3) - -#define H3800_ASIC1_MMC_BUFFER_PART_FULL (1 << 0) - -/********* GPIO **********/ - -#define _H3800_ASIC1_GPIO_Base 0x1e00 - -#define _H3800_ASIC1_GPIO_Mask 0x30 /* R/W 0:don't mask, 1:mask interrupt */ -#define _H3800_ASIC1_GPIO_Direction 0x32 /* R/W 0:input, 1:output */ -#define _H3800_ASIC1_GPIO_Out 0x34 /* R/W 0:output low, 1:output high */ -#define _H3800_ASIC1_GPIO_TriggerType 0x36 /* R/W 0:level, 1:edge */ -#define _H3800_ASIC1_GPIO_EdgeTrigger 0x38 /* R/W 0:falling, 1:rising */ -#define _H3800_ASIC1_GPIO_LevelTrigger 0x3A /* R/W 0:low, 1:high level detect */ -#define _H3800_ASIC1_GPIO_LevelStatus 0x3C /* R/W 0:none, 1:detect */ -#define _H3800_ASIC1_GPIO_EdgeStatus 0x3E /* R/W 0:none, 1:detect */ -#define _H3800_ASIC1_GPIO_State 0x40 /* R See masks below (default 0) */ -#define _H3800_ASIC1_GPIO_Reset 0x42 /* R/W See masks below (default 0x04) */ -#define _H3800_ASIC1_GPIO_SleepMask 0x44 /* R/W 0:don't mask, 1:mask trigger in sleep mode */ -#define _H3800_ASIC1_GPIO_SleepDir 0x46 /* R/W direction 0:input, 1:output in sleep mode */ -#define _H3800_ASIC1_GPIO_SleepOut 0x48 /* R/W level 0:low, 1:high in sleep mode */ -#define _H3800_ASIC1_GPIO_Status 0x4A /* R Pin status */ -#define _H3800_ASIC1_GPIO_BattFaultDir 0x4C /* R/W direction 0:input, 1:output in batt_fault */ -#define _H3800_ASIC1_GPIO_BattFaultOut 0x4E /* R/W level 0:low, 1:high in batt_fault */ - -#define H3800_ASIC1_GPIO_Mask H3800_ASIC1_OFFSET( u16, GPIO, Mask ) -#define H3800_ASIC1_GPIO_Direction H3800_ASIC1_OFFSET( u16, GPIO, Direction ) -#define H3800_ASIC1_GPIO_Out H3800_ASIC1_OFFSET( u16, GPIO, Out ) -#define H3800_ASIC1_GPIO_TriggerType H3800_ASIC1_OFFSET( u16, GPIO, TriggerType ) -#define H3800_ASIC1_GPIO_EdgeTrigger H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger ) -#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger ) -#define H3800_ASIC1_GPIO_LevelStatus H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus ) -#define H3800_ASIC1_GPIO_EdgeStatus H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus ) -#define H3800_ASIC1_GPIO_State H3800_ASIC1_OFFSET( u8, GPIO, State ) -#define H3800_ASIC1_GPIO_Reset H3800_ASIC1_OFFSET( u8, GPIO, Reset ) -#define H3800_ASIC1_GPIO_SleepMask H3800_ASIC1_OFFSET( u16, GPIO, SleepMask ) -#define H3800_ASIC1_GPIO_SleepDir H3800_ASIC1_OFFSET( u16, GPIO, SleepDir ) -#define H3800_ASIC1_GPIO_SleepOut H3800_ASIC1_OFFSET( u16, GPIO, SleepOut ) -#define H3800_ASIC1_GPIO_Status H3800_ASIC1_OFFSET( u16, GPIO, Status ) -#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir ) -#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut ) - -#define H3800_ASIC1_GPIO_STATE_MASK (1 << 0) -#define H3800_ASIC1_GPIO_STATE_DIRECTION (1 << 1) -#define H3800_ASIC1_GPIO_STATE_OUT (1 << 2) -#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE (1 << 3) -#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER (1 << 4) -#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER (1 << 5) - -#define H3800_ASIC1_GPIO_RESET_SOFTWARE (1 << 0) -#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP (1 << 1) -#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON (1 << 2) - -/* These are all outputs */ -#define GPIO_H3800_ASIC1_IR_ON_N (1 << 0) /* Apply power to the IR Module */ -#define GPIO_H3800_ASIC1_SD_PWR_ON (1 << 1) /* Secure Digital power on */ -#define GPIO_H3800_ASIC1_RS232_ON (1 << 2) /* Turn on power to the RS232 chip ? */ -#define GPIO_H3800_ASIC1_PULSE_GEN (1 << 3) /* Goes to speaker / earphone */ -#define GPIO_H3800_ASIC1_CH_TIMER (1 << 4) /* */ -#define GPIO_H3800_ASIC1_LCD_5V_ON (1 << 5) /* Enables LCD_5V */ -#define GPIO_H3800_ASIC1_LCD_ON (1 << 6) /* Enables LCD_3V */ -#define GPIO_H3800_ASIC1_LCD_PCI (1 << 7) /* Connects to PDWN on LCD controller */ -#define GPIO_H3800_ASIC1_VGH_ON (1 << 8) /* Drives VGH on the LCD (+9??) */ -#define GPIO_H3800_ASIC1_VGL_ON (1 << 9) /* Drivers VGL on the LCD (-6??) */ -#define GPIO_H3800_ASIC1_FL_PWR_ON (1 << 10) /* Frontlight power on */ -#define GPIO_H3800_ASIC1_BT_PWR_ON (1 << 11) /* Bluetooth power on */ -#define GPIO_H3800_ASIC1_SPK_ON (1 << 12) /* */ -#define GPIO_H3800_ASIC1_EAR_ON_N (1 << 13) /* */ -#define GPIO_H3800_ASIC1_AUD_PWR_ON (1 << 14) /* */ - -/* Write enable for the flash */ - -#define _H3800_ASIC1_FlashWP_Base 0x1F00 -#define _H3800_ASIC1_FlashWP_VPP_ON 0x00 /* R 1: write, 0: protect */ -#define H3800_ASIC1_FlashWP_VPP_ON H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON ) #endif /* _INCLUDE_H3600_GPIO_H_ */ diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h index 0cb36609b3ac..ae81f80b0cf9 100644 --- a/arch/arm/mach-sa1100/include/mach/irqs.h +++ b/arch/arm/mach-sa1100/include/mach/irqs.h @@ -153,8 +153,6 @@ */ #ifdef CONFIG_SA1111 #define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1) -#elif defined(CONFIG_SA1100_H3800) -#define NR_IRQS (IRQ_BOARD_END) #elif defined(CONFIG_SHARP_LOCOMO) #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) #else @@ -175,23 +173,3 @@ #define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) #define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) -/* H3800-specific IRQs (CONFIG_SA1100_H3800) */ -#define H3800_KPIO_IRQ_START (IRQ_BOARD_START) -#define IRQ_H3800_KEY (IRQ_BOARD_START + 0) -#define IRQ_H3800_SPI (IRQ_BOARD_START + 1) -#define IRQ_H3800_OWM (IRQ_BOARD_START + 2) -#define IRQ_H3800_ADC (IRQ_BOARD_START + 3) -#define IRQ_H3800_UART_0 (IRQ_BOARD_START + 4) -#define IRQ_H3800_UART_1 (IRQ_BOARD_START + 5) -#define IRQ_H3800_TIMER_0 (IRQ_BOARD_START + 6) -#define IRQ_H3800_TIMER_1 (IRQ_BOARD_START + 7) -#define IRQ_H3800_TIMER_2 (IRQ_BOARD_START + 8) -#define H3800_KPIO_IRQ_COUNT 9 - -#define H3800_GPIO_IRQ_START (IRQ_BOARD_START + 9) -#define IRQ_H3800_PEN (IRQ_BOARD_START + 9) -#define IRQ_H3800_SD_DETECT (IRQ_BOARD_START + 10) -#define IRQ_H3800_EAR_IN (IRQ_BOARD_START + 11) -#define IRQ_H3800_USB_DETECT (IRQ_BOARD_START + 12) -#define IRQ_H3800_SD_CON_SLT (IRQ_BOARD_START + 13) -#define H3800_GPIO_IRQ_COUNT 5 diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index 076f946fa0f5..022d07abbf99 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c @@ -251,22 +251,6 @@ static struct sa1100fb_mach_info pal_info __initdata = { #endif #endif -#ifdef CONFIG_SA1100_H3800 -static struct sa1100fb_mach_info h3800_info __initdata = { - .pixclock = 174757, .bpp = 16, - .xres = 320, .yres = 240, - - .hsync_len = 3, .vsync_len = 3, - .left_margin = 12, .upper_margin = 10, - .right_margin = 17, .lower_margin = 1, - - .cmap_static = 1, - - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), -}; -#endif - #ifdef CONFIG_SA1100_H3600 static struct sa1100fb_mach_info h3600_info __initdata = { .pixclock = 174757, .bpp = 16, @@ -432,11 +416,6 @@ sa1100fb_get_machine_info(struct sa1100fb_info *fbi) fbi->rgb[RGB_16] = &h3600_rgb_16; } #endif -#ifdef CONFIG_SA1100_H3800 - if (machine_is_h3800()) { - inf = &h3800_info; - } -#endif #ifdef CONFIG_SA1100_COLLIE if (machine_is_collie()) { inf = &collie_info; |