diff options
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 192 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 226 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_common.h | 5 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c | 8 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 61 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 21 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 27 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c | 102 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 485 |
11 files changed, 855 insertions, 278 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index a699c991ad2c..dda0f678339a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -594,6 +594,7 @@ struct ixgbe_mac_addr { /* default to trying for four seconds */ #define IXGBE_TRY_LINK_TIMEOUT (4 * HZ) +#define IXGBE_SFP_POLL_JIFFIES (2 * HZ) /* SFP poll every 2 seconds */ /* board specific private data structure */ struct ixgbe_adapter { @@ -707,6 +708,7 @@ struct ixgbe_adapter { u32 link_speed; bool link_up; + unsigned long sfp_poll_time; unsigned long link_check_timeout; struct timer_list service_timer; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 85156fb53b62..a39afcf03e2c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -44,9 +44,8 @@ static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); -static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg_wait_to_complete); +static void +ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *, ixgbe_link_speed); static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg_wait_to_complete); @@ -109,6 +108,9 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) if (hw->phy.multispeed_fiber) { /* Set up dual speed SFP+ support */ mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber; + mac->ops.setup_mac_link = ixgbe_setup_mac_link_82599; + mac->ops.set_rate_select_speed = + ixgbe_set_hard_rate_select_speed; } else { if ((mac->ops.get_media_type(hw) == ixgbe_media_type_backplane) && @@ -646,176 +648,32 @@ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) } /** - * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg_wait_to_complete: true when waiting for completion is needed + * ixgbe_set_hard_rate_select_speed - Set module link speed + * @hw: pointer to hardware structure + * @speed: link speed to set * - * Set the link speed in the AUTOC register and restarts link. - **/ -static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, - ixgbe_link_speed speed, - bool autoneg_wait_to_complete) + * Set module link speed via RS0/RS1 rate select pins. + */ +static void +ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed) { - s32 status = 0; - ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; - ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; - u32 speedcnt = 0; u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); - u32 i = 0; - bool link_up = false; - bool autoneg = false; - /* Mask off requested but non-supported speeds */ - status = hw->mac.ops.get_link_capabilities(hw, &link_speed, - &autoneg); - if (status != 0) - return status; - - speed &= link_speed; - - /* - * Try each speed one by one, highest priority first. We do this in - * software because 10gb fiber doesn't support speed autonegotiation. - */ - if (speed & IXGBE_LINK_SPEED_10GB_FULL) { - speedcnt++; - highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; - - /* If we already have link at this speed, just jump out */ - status = hw->mac.ops.check_link(hw, &link_speed, &link_up, - false); - if (status != 0) - return status; - - if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up) - goto out; - - /* Set the module link speed */ - switch (hw->phy.media_type) { - case ixgbe_media_type_fiber: - esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - break; - case ixgbe_media_type_fiber_qsfp: - /* QSFP module automatically detects MAC link speed */ - break; - default: - hw_dbg(hw, "Unexpected media type.\n"); - break; - } - - /* Allow module to change analog characteristics (1G->10G) */ - msleep(40); - - status = ixgbe_setup_mac_link_82599(hw, - IXGBE_LINK_SPEED_10GB_FULL, - autoneg_wait_to_complete); - if (status != 0) - return status; - - /* Flap the tx laser if it has not already been done */ - if (hw->mac.ops.flap_tx_laser) - hw->mac.ops.flap_tx_laser(hw); - - /* - * Wait for the controller to acquire link. Per IEEE 802.3ap, - * Section 73.10.2, we may have to wait up to 500ms if KR is - * attempted. 82599 uses the same timing for 10g SFI. - */ - for (i = 0; i < 5; i++) { - /* Wait for the link partner to also set speed */ - msleep(100); - - /* If we have link, just jump out */ - status = hw->mac.ops.check_link(hw, &link_speed, - &link_up, false); - if (status != 0) - return status; - - if (link_up) - goto out; - } - } - - if (speed & IXGBE_LINK_SPEED_1GB_FULL) { - speedcnt++; - if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) - highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; - - /* If we already have link at this speed, just jump out */ - status = hw->mac.ops.check_link(hw, &link_speed, &link_up, - false); - if (status != 0) - return status; - - if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up) - goto out; - - /* Set the module link speed */ - switch (hw->phy.media_type) { - case ixgbe_media_type_fiber: - esdp_reg &= ~IXGBE_ESDP_SDP5; - esdp_reg |= IXGBE_ESDP_SDP5_DIR; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); - break; - case ixgbe_media_type_fiber_qsfp: - /* QSFP module automatically detects MAC link speed */ - break; - default: - hw_dbg(hw, "Unexpected media type.\n"); - break; - } - - /* Allow module to change analog characteristics (10G->1G) */ - msleep(40); - - status = ixgbe_setup_mac_link_82599(hw, - IXGBE_LINK_SPEED_1GB_FULL, - autoneg_wait_to_complete); - if (status != 0) - return status; - - /* Flap the tx laser if it has not already been done */ - if (hw->mac.ops.flap_tx_laser) - hw->mac.ops.flap_tx_laser(hw); - - /* Wait for the link partner to also set speed */ - msleep(100); - - /* If we have link, just jump out */ - status = hw->mac.ops.check_link(hw, &link_speed, &link_up, - false); - if (status != 0) - return status; - - if (link_up) - goto out; + switch (speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); + break; + case IXGBE_LINK_SPEED_1GB_FULL: + esdp_reg &= ~IXGBE_ESDP_SDP5; + esdp_reg |= IXGBE_ESDP_SDP5_DIR; + break; + default: + hw_dbg(hw, "Invalid fixed module speed\n"); + return; } - /* - * We didn't get link. Configure back to the highest speed we tried, - * (if there was more than one). We call ourselves back with just the - * single highest speed that the user requested. - */ - if (speedcnt > 1) - status = ixgbe_setup_mac_link_multispeed_fiber(hw, - highest_link_speed, - autoneg_wait_to_complete); - -out: - /* Set autoneg_advertised value based on input link speed */ - hw->phy.autoneg_advertised = 0; - - if (speed & IXGBE_LINK_SPEED_10GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; - - if (speed & IXGBE_LINK_SPEED_1GB_FULL) - hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; - - return status; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); } /** diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 3f56a8080118..ce61b36b94f1 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -297,13 +297,13 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) /* Setup flow control */ ret_val = ixgbe_setup_fc(hw); - if (!ret_val) - return 0; + if (ret_val) + return ret_val; /* Clear adapter stopped flag */ hw->adapter_stopped = false; - return ret_val; + return 0; } /** @@ -2164,10 +2164,11 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw) /* * In order to prevent Tx hangs when the internal Tx * switch is enabled we must set the high water mark - * to the maximum FCRTH value. This allows the Tx - * switch to function even under heavy Rx workloads. + * to the Rx packet buffer size - 24KB. This allows + * the Tx switch to function even under heavy Rx + * workloads. */ - fcrth = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 32; + fcrth = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 24576; } IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), fcrth); @@ -2476,6 +2477,9 @@ static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) hw_dbg(hw, "GIO Master Disable bit didn't clear - requesting resets\n"); hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + if (hw->mac.type >= ixgbe_mac_X550) + return 0; + /* * Before proceeding, make sure that the PCIe block does not have * transactions pending. @@ -3920,3 +3924,213 @@ bool ixgbe_mng_present(struct ixgbe_hw *hw) fwsm &= IXGBE_FWSM_MODE_MASK; return fwsm == IXGBE_FWSM_FW_MODE_PT; } + +/** + * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the MAC and/or PHY register and restarts link. + */ +s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) +{ + ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; + ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; + s32 status = 0; + u32 speedcnt = 0; + u32 i = 0; + bool autoneg, link_up = false; + + /* Mask off requested but non-supported speeds */ + status = hw->mac.ops.get_link_capabilities(hw, &link_speed, &autoneg); + if (status) + return status; + + speed &= link_speed; + + /* Try each speed one by one, highest priority first. We do this in + * software because 10Gb fiber doesn't support speed autonegotiation. + */ + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + speedcnt++; + highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, &link_up, + false); + if (status) + return status; + + if (link_speed == IXGBE_LINK_SPEED_10GB_FULL && link_up) + goto out; + + /* Set the module link speed */ + switch (hw->phy.media_type) { + case ixgbe_media_type_fiber: + hw->mac.ops.set_rate_select_speed(hw, + IXGBE_LINK_SPEED_10GB_FULL); + break; + case ixgbe_media_type_fiber_qsfp: + /* QSFP module automatically detects MAC link speed */ + break; + default: + hw_dbg(hw, "Unexpected media type\n"); + break; + } + + /* Allow module to change analog characteristics (1G->10G) */ + msleep(40); + + status = hw->mac.ops.setup_mac_link(hw, + IXGBE_LINK_SPEED_10GB_FULL, + autoneg_wait_to_complete); + if (status) + return status; + + /* Flap the Tx laser if it has not already been done */ + if (hw->mac.ops.flap_tx_laser) + hw->mac.ops.flap_tx_laser(hw); + + /* Wait for the controller to acquire link. Per IEEE 802.3ap, + * Section 73.10.2, we may have to wait up to 500ms if KR is + * attempted. 82599 uses the same timing for 10g SFI. + */ + for (i = 0; i < 5; i++) { + /* Wait for the link partner to also set speed */ + msleep(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, + &link_up, false); + if (status) + return status; + + if (link_up) + goto out; + } + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + speedcnt++; + if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) + highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, &link_up, + false); + if (status) + return status; + + if (link_speed == IXGBE_LINK_SPEED_1GB_FULL && link_up) + goto out; + + /* Set the module link speed */ + switch (hw->phy.media_type) { + case ixgbe_media_type_fiber: + hw->mac.ops.set_rate_select_speed(hw, + IXGBE_LINK_SPEED_1GB_FULL); + break; + case ixgbe_media_type_fiber_qsfp: + /* QSFP module automatically detects link speed */ + break; + default: + hw_dbg(hw, "Unexpected media type\n"); + break; + } + + /* Allow module to change analog characteristics (10G->1G) */ + msleep(40); + + status = hw->mac.ops.setup_mac_link(hw, + IXGBE_LINK_SPEED_1GB_FULL, + autoneg_wait_to_complete); + if (status) + return status; + + /* Flap the Tx laser if it has not already been done */ + if (hw->mac.ops.flap_tx_laser) + hw->mac.ops.flap_tx_laser(hw); + + /* Wait for the link partner to also set speed */ + msleep(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, &link_up, + false); + if (status) + return status; + + if (link_up) + goto out; + } + + /* We didn't get link. Configure back to the highest speed we tried, + * (if there was more than one). We call ourselves back with just the + * single highest speed that the user requested. + */ + if (speedcnt > 1) + status = ixgbe_setup_mac_link_multispeed_fiber(hw, + highest_link_speed, + autoneg_wait_to_complete); + +out: + /* Set autoneg_advertised value based on input link speed */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + return status; +} + +/** + * ixgbe_set_soft_rate_select_speed - Set module link speed + * @hw: pointer to hardware structure + * @speed: link speed to set + * + * Set module link speed via the soft rate select. + */ +void ixgbe_set_soft_rate_select_speed(struct ixgbe_hw *hw, + ixgbe_link_speed speed) +{ + s32 status; + u8 rs, eeprom_data; + + switch (speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + /* one bit mask same as setting on */ + rs = IXGBE_SFF_SOFT_RS_SELECT_10G; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + rs = IXGBE_SFF_SOFT_RS_SELECT_1G; + break; + default: + hw_dbg(hw, "Invalid fixed module speed\n"); + return; + } + + /* Set RS0 */ + status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + &eeprom_data); + if (status) { + hw_dbg(hw, "Failed to read Rx Rate Select RS0\n"); + return; + } + + eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) | rs; + + status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + eeprom_data); + if (status) { + hw_dbg(hw, "Failed to write Rx Rate Select RS0\n"); + return; + } +} diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h index 2f779f35dc4f..a0044e4a8b90 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h @@ -135,6 +135,11 @@ s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw); s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw); void ixgbe_disable_rx_generic(struct ixgbe_hw *hw); void ixgbe_enable_rx_generic(struct ixgbe_hw *hw); +s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait_to_complete); +void ixgbe_set_soft_rate_select_speed(struct ixgbe_hw *hw, + ixgbe_link_speed speed); #define IXGBE_FAILED_READ_REG 0xffffffffU #define IXGBE_FAILED_READ_CFG_DWORD 0xffffffffU diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c index 3b932fe64ab6..23277ab153b6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c @@ -259,7 +259,13 @@ s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en, u8 *prio_tc) fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE; IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), fcrtl); } else { - reg = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 32; + /* In order to prevent Tx hangs when the internal Tx + * switch is enabled we must set the high water mark + * to the Rx packet buffer size - 24KB. This allows + * the Tx switch to function even under heavy Rx + * workloads. + */ + reg = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 24576; IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0); } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 369204c18832..191003901adb 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -79,7 +79,7 @@ char ixgbe_default_device_descr[] = static char ixgbe_default_device_descr[] = "Intel(R) 10 Gigabit Network Connection"; #endif -#define DRV_VERSION "4.0.1-k" +#define DRV_VERSION "4.2.1-k" const char ixgbe_driver_version[] = DRV_VERSION; static const char ixgbe_copyright[] = "Copyright (c) 1999-2015 Intel Corporation."; @@ -137,6 +137,7 @@ static const struct pci_device_id ixgbe_pci_tbl[] = { {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_KX4), board_X550EM_x}, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_KR), board_X550EM_x}, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_10G_T), board_X550EM_x}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_SFP), board_X550EM_x}, /* required last entry */ {0, } }; @@ -1244,9 +1245,12 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, int cpu) { struct ixgbe_hw *hw = &adapter->hw; - u32 txctrl = dca3_get_tag(tx_ring->dev, cpu); + u32 txctrl = 0; u16 reg_offset; + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) + txctrl = dca3_get_tag(tx_ring->dev, cpu); + switch (hw->mac.type) { case ixgbe_mac_82598EB: reg_offset = IXGBE_DCA_TXCTRL(tx_ring->reg_idx); @@ -1278,9 +1282,11 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, int cpu) { struct ixgbe_hw *hw = &adapter->hw; - u32 rxctrl = dca3_get_tag(rx_ring->dev, cpu); + u32 rxctrl = 0; u8 reg_idx = rx_ring->reg_idx; + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) + rxctrl = dca3_get_tag(rx_ring->dev, cpu); switch (hw->mac.type) { case ixgbe_mac_82599EB: @@ -1297,6 +1303,7 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, * which will cause the DCA tag to be cleared. */ rxctrl |= IXGBE_DCA_RXCTRL_DESC_RRO_EN | + IXGBE_DCA_RXCTRL_DATA_DCA_EN | IXGBE_DCA_RXCTRL_DESC_DCA_EN; IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(reg_idx), rxctrl); @@ -1326,11 +1333,13 @@ static void ixgbe_setup_dca(struct ixgbe_adapter *adapter) { int i; - if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED)) - return; - /* always use CB2 mode, difference is masked in the CB driver */ - IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2); + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, + IXGBE_DCA_CTRL_DCA_MODE_CB2); + else + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, + IXGBE_DCA_CTRL_DCA_DISABLE); for (i = 0; i < adapter->num_q_vectors; i++) { adapter->q_vector[i]->cpu = -1; @@ -1353,7 +1362,8 @@ static int __ixgbe_notify_dca(struct device *dev, void *data) break; if (dca_add_requester(dev) == 0) { adapter->flags |= IXGBE_FLAG_DCA_ENABLED; - ixgbe_setup_dca(adapter); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, + IXGBE_DCA_CTRL_DCA_MODE_CB2); break; } /* Fall Through since DCA is disabled. */ @@ -1361,7 +1371,8 @@ static int __ixgbe_notify_dca(struct device *dev, void *data) if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { dca_remove_requester(dev); adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, + IXGBE_DCA_CTRL_DCA_DISABLE); } break; } @@ -2509,6 +2520,7 @@ static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr) IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr_mask); if (!test_bit(__IXGBE_DOWN, &adapter->state)) { adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; + adapter->sfp_poll_time = 0; ixgbe_service_event_schedule(adapter); } } @@ -3788,8 +3800,6 @@ static void ixgbe_setup_rdrxctl(struct ixgbe_adapter *adapter) u32 rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); switch (hw->mac.type) { - case ixgbe_mac_X550: - case ixgbe_mac_X550EM_x: case ixgbe_mac_82598EB: /* * For VMDq support of different descriptor types or @@ -3803,6 +3813,11 @@ static void ixgbe_setup_rdrxctl(struct ixgbe_adapter *adapter) */ rdrxctl |= IXGBE_RDRXCTL_MVMEN; break; + case ixgbe_mac_X550: + case ixgbe_mac_X550EM_x: + if (adapter->num_vfs) + rdrxctl |= IXGBE_RDRXCTL_PSP; + /* fall through for older HW */ case ixgbe_mac_82599EB: case ixgbe_mac_X540: /* Disable RSC for ACK packets */ @@ -4778,6 +4793,12 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter) break; } +#ifdef CONFIG_IXGBE_DCA + /* configure DCA */ + if (adapter->flags & IXGBE_FLAG_DCA_CAPABLE) + ixgbe_setup_dca(adapter); +#endif /* CONFIG_IXGBE_DCA */ + #ifdef IXGBE_FCOE /* configure FCoE L2 filters, redirection table, and Rx control */ ixgbe_configure_fcoe(adapter); @@ -4804,6 +4825,7 @@ static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter) adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP; adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; + adapter->sfp_poll_time = 0; } /** @@ -4894,9 +4916,6 @@ static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter) case ixgbe_mac_82599EB: gpie |= IXGBE_SDP0_GPIEN_8259X; break; - case ixgbe_mac_X540: - gpie |= IXGBE_EIMS_TS; - break; default: break; } @@ -5237,11 +5256,6 @@ void ixgbe_down(struct ixgbe_adapter *adapter) ixgbe_clean_all_tx_rings(adapter); ixgbe_clean_all_rx_rings(adapter); - -#ifdef CONFIG_IXGBE_DCA - /* since we reset the hardware DCA settings were cleared */ - ixgbe_setup_dca(adapter); -#endif } /** @@ -6709,10 +6723,16 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) return; + if (adapter->sfp_poll_time && + time_after(adapter->sfp_poll_time, jiffies)) + return; /* If not yet time to poll for SFP */ + /* someone else is in init, wait until next service event */ if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) return; + adapter->sfp_poll_time = jiffies + IXGBE_SFP_POLL_JIFFIES - 1; + err = hw->phy.ops.identify_sfp(hw); if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) goto sfp_out; @@ -9024,7 +9044,8 @@ static void ixgbe_remove(struct pci_dev *pdev) if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; dca_remove_requester(&pdev->dev); - IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, + IXGBE_DCA_CTRL_DCA_DISABLE); } #endif diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index 315f0597fbc0..fb8673d63806 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -1230,7 +1230,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) hw->phy.sfp_type = ixgbe_sfp_type_lr; else hw->phy.sfp_type = ixgbe_sfp_type_unknown; - } else if (hw->mac.type == ixgbe_mac_82599EB) { + } else { if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) { if (hw->bus.lan_id == 0) hw->phy.sfp_type = @@ -1731,6 +1731,21 @@ s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, } /** + * ixgbe_is_sfp_probe - Returns true if SFP is being detected + * @hw: pointer to hardware structure + * @offset: eeprom offset to be read + * @addr: I2C address to be read + */ +static bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr) +{ + if (addr == IXGBE_I2C_EEPROM_DEV_ADDR && + offset == IXGBE_SFF_IDENTIFIER && + hw->phy.sfp_type == ixgbe_sfp_type_not_present) + return true; + return false; +} + +/** * ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to read @@ -1749,6 +1764,9 @@ static s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset, u32 swfw_mask = hw->phy.phy_semaphore_mask; bool nack = true; + if (ixgbe_is_sfp_probe(hw, byte_offset, dev_addr)) + max_retry = IXGBE_SFP_DETECT_RETRIES; + *data = 0; do { @@ -2026,6 +2044,7 @@ static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data) s32 i; bool bit = false; + *data = 0; for (i = 7; i >= 0; i--) { ixgbe_clock_in_i2c_bit(hw, &bit); *data |= bit << i; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index 4c06484fdebc..5abd66c84d00 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -66,6 +66,9 @@ #define IXGBE_SFF_1GBASET_CAPABLE 0x8 #define IXGBE_SFF_10GBASESR_CAPABLE 0x10 #define IXGBE_SFF_10GBASELR_CAPABLE 0x20 +#define IXGBE_SFF_SOFT_RS_SELECT_MASK 0x8 +#define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8 +#define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0 #define IXGBE_SFF_ADDRESSING_MODE 0x4 #define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1 #define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8 @@ -78,9 +81,29 @@ #define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2 #define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3 #define IXGBE_CS4227 0xBE /* CS4227 address */ -#define IXGBE_CS4227_SPARE24_LSB 0x12B0 /* Reg to program EDC */ +#define IXGBE_CS4227_SCRATCH 2 +#define IXGBE_CS4227_RESET_PENDING 0x1357 +#define IXGBE_CS4227_RESET_COMPLETE 0x5AA5 +#define IXGBE_CS4227_RETRIES 15 +#define IXGBE_CS4227_EFUSE_STATUS 0x0181 +#define IXGBE_CS4227_LINE_SPARE22_MSB 0x12AD /* Reg to set speed */ +#define IXGBE_CS4227_LINE_SPARE24_LSB 0x12B0 /* Reg to set EDC */ +#define IXGBE_CS4227_HOST_SPARE22_MSB 0x1AAD /* Reg to set speed */ +#define IXGBE_CS4227_HOST_SPARE24_LSB 0x1AB0 /* Reg to program EDC */ +#define IXGBE_CS4227_EEPROM_STATUS 0x5001 +#define IXGBE_CS4227_EEPROM_LOAD_OK 0x0001 +#define IXGBE_CS4227_SPEED_1G 0x8000 +#define IXGBE_CS4227_SPEED_10G 0 #define IXGBE_CS4227_EDC_MODE_CX1 0x0002 #define IXGBE_CS4227_EDC_MODE_SR 0x0004 +#define IXGBE_CS4227_EDC_MODE_DIAG 0x0008 +#define IXGBE_CS4227_RESET_HOLD 500 /* microseconds */ +#define IXGBE_CS4227_RESET_DELAY 500 /* milliseconds */ +#define IXGBE_CS4227_CHECK_DELAY 30 /* milliseconds */ +#define IXGBE_PE 0xE0 /* Port expander addr */ +#define IXGBE_PE_OUTPUT 1 /* Output reg offset */ +#define IXGBE_PE_CONFIG 3 /* Config reg offset */ +#define IXGBE_PE_BIT1 (1 << 1) /* Flow control defines */ #define IXGBE_TAF_SYM_PAUSE 0x400 @@ -109,6 +132,8 @@ #define IXGBE_I2C_T_SU_STO 4 #define IXGBE_I2C_T_BUF 5 +#define IXGBE_SFP_DETECT_RETRIES 2 + #define IXGBE_TN_LASI_STATUS_REG 0x9005 #define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008 diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 3be743b4f6ba..939c90c4ff39 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -1193,6 +1193,7 @@ struct ixgbe_thermal_sensor_data { /* RDRXCTL Bit Masks */ #define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 /* Rx Desc Min Threshold Size */ #define IXGBE_RDRXCTL_CRCSTRIP 0x00000002 /* CRC Strip */ +#define IXGBE_RDRXCTL_PSP 0x00000004 /* Pad small packet */ #define IXGBE_RDRXCTL_MVMEN 0x00000020 #define IXGBE_RDRXCTL_DMAIDONE 0x00000008 /* DMA init cycle done */ #define IXGBE_RDRXCTL_AGGDIS 0x00010000 /* Aggregation disable */ @@ -1949,6 +1950,7 @@ enum { #define IXGBE_GSSR_SW_MNG_SM 0x0400 #define IXGBE_GSSR_SHARED_I2C_SM 0x1806 /* Wait for both phys & I2Cs */ #define IXGBE_GSSR_I2C_MASK 0x1800 +#define IXGBE_GSSR_NVM_PHY_MASK 0xF /* FW Status register bitmask */ #define IXGBE_FWSTS_FWRI 0x00000200 /* Firmware Reset Indication */ @@ -3256,9 +3258,11 @@ struct ixgbe_mac_operations { void (*flap_tx_laser)(struct ixgbe_hw *); void (*stop_link_on_d3)(struct ixgbe_hw *); s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool); + s32 (*setup_mac_link)(struct ixgbe_hw *, ixgbe_link_speed, bool); s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool); s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *, bool *); + void (*set_rate_select_speed)(struct ixgbe_hw *, ixgbe_link_speed); /* Packet Buffer Manipulation */ void (*set_rxpba)(struct ixgbe_hw *, int, u32, int); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c index 4e758435ece8..c1d4584f6469 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c @@ -567,19 +567,25 @@ static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw) **/ s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) { - u32 swfw_sync; - u32 swmask = mask; - u32 fwmask = mask << 5; - u32 hwmask = 0; + u32 swmask = mask & IXGBE_GSSR_NVM_PHY_MASK; + u32 swi2c_mask = mask & IXGBE_GSSR_I2C_MASK; + u32 fwmask = swmask << 5; u32 timeout = 200; + u32 hwmask = 0; + u32 swfw_sync; u32 i; - if (swmask == IXGBE_GSSR_EEP_SM) + if (swmask & IXGBE_GSSR_EEP_SM) hwmask = IXGBE_GSSR_FLASH_SM; + /* SW only mask does not have FW bit pair */ + if (mask & IXGBE_GSSR_SW_MNG_SM) + swmask |= IXGBE_GSSR_SW_MNG_SM; + + swmask |= swi2c_mask; + fwmask |= swi2c_mask << 2; for (i = 0; i < timeout; i++) { - /* - * SW NVM semaphore bit is used for access to all + /* SW NVM semaphore bit is used for access to all * SW_FW_SYNC bits (not just NVM) */ if (ixgbe_get_swfw_sync_semaphore(hw)) @@ -590,39 +596,56 @@ s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) swfw_sync |= swmask; IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swfw_sync); ixgbe_release_swfw_sync_semaphore(hw); - break; - } else { - /* - * Firmware currently using resource (fwmask), - * hardware currently using resource (hwmask), - * or other software thread currently using - * resource (swmask) - */ - ixgbe_release_swfw_sync_semaphore(hw); - usleep_range(5000, 10000); + usleep_range(5000, 6000); + return 0; } + /* Firmware currently using resource (fwmask), hardware + * currently using resource (hwmask), or other software + * thread currently using resource (swmask) + */ + ixgbe_release_swfw_sync_semaphore(hw); + usleep_range(5000, 10000); } - /* - * If the resource is not released by the FW/HW the SW can assume that - * the FW/HW malfunctions. In that case the SW should sets the - * SW bit(s) of the requested resource(s) while ignoring the - * corresponding FW/HW bits in the SW_FW_SYNC register. - */ - if (i >= timeout) { - swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw)); - if (swfw_sync & (fwmask | hwmask)) { - if (ixgbe_get_swfw_sync_semaphore(hw)) - return IXGBE_ERR_SWFW_SYNC; + /* Failed to get SW only semaphore */ + if (swmask == IXGBE_GSSR_SW_MNG_SM) { + hw_dbg(hw, "Failed to get SW only semaphore\n"); + return IXGBE_ERR_SWFW_SYNC; + } - swfw_sync |= swmask; - IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swfw_sync); - ixgbe_release_swfw_sync_semaphore(hw); - } + /* If the resource is not released by the FW/HW the SW can assume that + * the FW/HW malfunctions. In that case the SW should set the SW bit(s) + * of the requested resource(s) while ignoring the corresponding FW/HW + * bits in the SW_FW_SYNC register. + */ + if (ixgbe_get_swfw_sync_semaphore(hw)) + return IXGBE_ERR_SWFW_SYNC; + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw)); + if (swfw_sync & (fwmask | hwmask)) { + swfw_sync |= swmask; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swfw_sync); + ixgbe_release_swfw_sync_semaphore(hw); + usleep_range(5000, 6000); + return 0; } + /* If the resource is not released by other SW the SW can assume that + * the other SW malfunctions. In that case the SW should clear all SW + * flags that it does not own and then repeat the whole process once + * again. + */ + if (swfw_sync & swmask) { + u32 rmask = IXGBE_GSSR_EEP_SM | IXGBE_GSSR_PHY0_SM | + IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_MAC_CSR_SM; + + if (swi2c_mask) + rmask |= IXGBE_GSSR_I2C_MASK; + ixgbe_release_swfw_sync_X540(hw, rmask); + ixgbe_release_swfw_sync_semaphore(hw); + return IXGBE_ERR_SWFW_SYNC; + } + ixgbe_release_swfw_sync_semaphore(hw); - usleep_range(5000, 10000); - return 0; + return IXGBE_ERR_SWFW_SYNC; } /** @@ -635,9 +658,11 @@ s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) **/ void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) { + u32 swmask = mask & (IXGBE_GSSR_NVM_PHY_MASK | IXGBE_GSSR_SW_MNG_SM); u32 swfw_sync; - u32 swmask = mask; + if (mask & IXGBE_GSSR_I2C_MASK) + swmask |= mask & IXGBE_GSSR_I2C_MASK; ixgbe_get_swfw_sync_semaphore(hw); swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw)); @@ -645,7 +670,7 @@ void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swfw_sync); ixgbe_release_swfw_sync_semaphore(hw); - usleep_range(5000, 10000); + usleep_range(5000, 6000); } /** @@ -686,6 +711,11 @@ static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw) usleep_range(50, 100); } + /* Release semaphores and return error if SW NVM semaphore + * was not granted because we do not have access to the EEPROM + */ + hw_dbg(hw, "REGSMP Software NVM semaphore not granted\n"); + ixgbe_release_swfw_sync_semaphore(hw); return IXGBE_ERR_EEPROM; } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index 2a1dca6e8d44..ed7b2899affe 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -56,6 +56,283 @@ static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw) IXGBE_WRITE_FLUSH(hw); } +/** + * ixgbe_read_cs4227 - Read CS4227 register + * @hw: pointer to hardware structure + * @reg: register number to write + * @value: pointer to receive value read + * + * Returns status code + */ +static s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value) +{ + return hw->phy.ops.read_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, + value); +} + +/** + * ixgbe_write_cs4227 - Write CS4227 register + * @hw: pointer to hardware structure + * @reg: register number to write + * @value: value to write to register + * + * Returns status code + */ +static s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value) +{ + return hw->phy.ops.write_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, + value); +} + +/** + * ixgbe_check_cs4227_reg - Perform diag on a CS4227 register + * @hw: pointer to hardware structure + * @reg: the register to check + * + * Performs a diagnostic on a register in the CS4227 chip. Returns an error + * if it is not operating correctly. + * This function assumes that the caller has acquired the proper semaphore. + */ +static s32 ixgbe_check_cs4227_reg(struct ixgbe_hw *hw, u16 reg) +{ + s32 status; + u32 retry; + u16 reg_val; + + reg_val = (IXGBE_CS4227_EDC_MODE_DIAG << 1) | 1; + status = ixgbe_write_cs4227(hw, reg, reg_val); + if (status) + return status; + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + msleep(IXGBE_CS4227_CHECK_DELAY); + reg_val = 0xFFFF; + ixgbe_read_cs4227(hw, reg, ®_val); + if (!reg_val) + break; + } + if (reg_val) { + hw_err(hw, "CS4227 reg 0x%04X failed diagnostic\n", reg); + return status; + } + + return 0; +} + +/** + * ixgbe_get_cs4227_status - Return CS4227 status + * @hw: pointer to hardware structure + * + * Performs a diagnostic on the CS4227 chip. Returns an error if it is + * not operating correctly. + * This function assumes that the caller has acquired the proper semaphore. + */ +static s32 ixgbe_get_cs4227_status(struct ixgbe_hw *hw) +{ + s32 status; + u16 value = 0; + + /* Exit if the diagnostic has already been performed. */ + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); + if (status) + return status; + if (value == IXGBE_CS4227_RESET_COMPLETE) + return 0; + + /* Check port 0. */ + status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_LINE_SPARE24_LSB); + if (status) + return status; + + status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_HOST_SPARE24_LSB); + if (status) + return status; + + /* Check port 1. */ + status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_LINE_SPARE24_LSB + + (1 << 12)); + if (status) + return status; + + return ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_HOST_SPARE24_LSB + + (1 << 12)); +} + +/** + * ixgbe_read_pe - Read register from port expander + * @hw: pointer to hardware structure + * @reg: register number to read + * @value: pointer to receive read value + * + * Returns status code + */ +static s32 ixgbe_read_pe(struct ixgbe_hw *hw, u8 reg, u8 *value) +{ + s32 status; + + status = ixgbe_read_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE, value); + if (status) + hw_err(hw, "port expander access failed with %d\n", status); + return status; +} + +/** + * ixgbe_write_pe - Write register to port expander + * @hw: pointer to hardware structure + * @reg: register number to write + * @value: value to write + * + * Returns status code + */ +static s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value) +{ + s32 status; + + status = ixgbe_write_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE, + value); + if (status) + hw_err(hw, "port expander access failed with %d\n", status); + return status; +} + +/** + * ixgbe_reset_cs4227 - Reset CS4227 using port expander + * @hw: pointer to hardware structure + * + * Returns error code + */ +static s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw) +{ + s32 status; + u32 retry; + u16 value; + u8 reg; + + /* Trigger hard reset. */ + status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); + if (status) + return status; + reg |= IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); + if (status) + return status; + + status = ixgbe_read_pe(hw, IXGBE_PE_CONFIG, ®); + if (status) + return status; + reg &= ~IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_CONFIG, reg); + if (status) + return status; + + status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); + if (status) + return status; + reg &= ~IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); + if (status) + return status; + + usleep_range(IXGBE_CS4227_RESET_HOLD, IXGBE_CS4227_RESET_HOLD + 100); + + status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); + if (status) + return status; + reg |= IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); + if (status) + return status; + + /* Wait for the reset to complete. */ + msleep(IXGBE_CS4227_RESET_DELAY); + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EFUSE_STATUS, + &value); + if (!status && value == IXGBE_CS4227_EEPROM_LOAD_OK) + break; + msleep(IXGBE_CS4227_CHECK_DELAY); + } + if (retry == IXGBE_CS4227_RETRIES) { + hw_err(hw, "CS4227 reset did not complete\n"); + return IXGBE_ERR_PHY; + } + + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS, &value); + if (status || !(value & IXGBE_CS4227_EEPROM_LOAD_OK)) { + hw_err(hw, "CS4227 EEPROM did not load successfully\n"); + return IXGBE_ERR_PHY; + } + + return 0; +} + +/** + * ixgbe_check_cs4227 - Check CS4227 and reset as needed + * @hw: pointer to hardware structure + */ +static void ixgbe_check_cs4227(struct ixgbe_hw *hw) +{ + u32 swfw_mask = hw->phy.phy_semaphore_mask; + s32 status; + u16 value; + u8 retry; + + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status) { + hw_err(hw, "semaphore failed with %d\n", status); + msleep(IXGBE_CS4227_CHECK_DELAY); + continue; + } + + /* Get status of reset flow. */ + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); + if (!status && value == IXGBE_CS4227_RESET_COMPLETE) + goto out; + + if (status || value != IXGBE_CS4227_RESET_PENDING) + break; + + /* Reset is pending. Wait and check again. */ + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msleep(IXGBE_CS4227_CHECK_DELAY); + } + + /* Reset the CS4227. */ + status = ixgbe_reset_cs4227(hw); + if (status) { + hw_err(hw, "CS4227 reset failed: %d", status); + goto out; + } + + /* Reset takes so long, temporarily release semaphore in case the + * other driver instance is waiting for the reset indication. + */ + ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, + IXGBE_CS4227_RESET_PENDING); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + usleep_range(10000, 12000); + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status) { + hw_err(hw, "semaphore failed with %d", status); + return; + } + + /* Is the CS4227 working correctly? */ + status = ixgbe_get_cs4227_status(hw); + if (status) { + hw_err(hw, "CS4227 status failed: %d", status); + goto out; + } + + /* Record completion for next time. */ + status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, + IXGBE_CS4227_RESET_COMPLETE); + +out: + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msleep(hw->eeprom.semaphore_delay); +} + /** ixgbe_identify_phy_x550em - Get PHY type based on device id * @hw: pointer to hardware structure * @@ -68,7 +345,7 @@ static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) /* set up for CS4227 usage */ hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; ixgbe_setup_mux_ctl(hw); - + ixgbe_check_cs4227(hw); return ixgbe_identify_module_generic(hw); case IXGBE_DEV_ID_X550EM_X_KX4: hw->phy.type = ixgbe_phy_x550em_kx4; @@ -910,6 +1187,96 @@ static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) } /** + * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported + * @hw: pointer to hardware structure + * @linear: true if SFP module is linear + */ +static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear) +{ + switch (hw->phy.sfp_type) { + case ixgbe_sfp_type_not_present: + return IXGBE_ERR_SFP_NOT_PRESENT; + case ixgbe_sfp_type_da_cu_core0: + case ixgbe_sfp_type_da_cu_core1: + *linear = true; + break; + case ixgbe_sfp_type_srlr_core0: + case ixgbe_sfp_type_srlr_core1: + case ixgbe_sfp_type_da_act_lmt_core0: + case ixgbe_sfp_type_da_act_lmt_core1: + case ixgbe_sfp_type_1g_sx_core0: + case ixgbe_sfp_type_1g_sx_core1: + case ixgbe_sfp_type_1g_lx_core0: + case ixgbe_sfp_type_1g_lx_core1: + *linear = false; + break; + case ixgbe_sfp_type_unknown: + case ixgbe_sfp_type_1g_cu_core0: + case ixgbe_sfp_type_1g_cu_core1: + default: + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } + + return 0; +} + +/** + * ixgbe_setup_mac_link_sfp_x550em - Configure the KR PHY for SFP. + * @hw: pointer to hardware structure + * + * Configures the extern PHY and the integrated KR PHY for SFP support. + */ +static s32 +ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + __always_unused bool autoneg_wait_to_complete) +{ + s32 status; + u16 slice, value; + bool setup_linear = false; + + /* Check if SFP module is supported and linear */ + status = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); + + /* If no SFP module present, then return success. Return success since + * there is no reason to configure CS4227 and SFP not present error is + * not accepted in the setup MAC link flow. + */ + if (status == IXGBE_ERR_SFP_NOT_PRESENT) + return 0; + + if (status) + return status; + + /* Configure CS4227 LINE side to 10G SR. */ + slice = IXGBE_CS4227_LINE_SPARE22_MSB + (hw->bus.lan_id << 12); + value = IXGBE_CS4227_SPEED_10G; + status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice, + value); + + /* Configure CS4227 for HOST connection rate then type. */ + slice = IXGBE_CS4227_HOST_SPARE22_MSB + (hw->bus.lan_id << 12); + value = speed & IXGBE_LINK_SPEED_10GB_FULL ? + IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G; + status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice, + value); + + slice = IXGBE_CS4227_HOST_SPARE24_LSB + (hw->bus.lan_id << 12); + if (setup_linear) + value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1; + else + value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1; + status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice, + value); + + /* If internal link mode is XFI, then setup XFI internal link. */ + if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) + status = ixgbe_setup_ixfi_x550em(hw, &speed); + + return status; +} + +/** * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed * @hw: pointer to hardware structure * @speed: new link speed @@ -1003,6 +1370,10 @@ static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) mac->ops.disable_tx_laser = NULL; mac->ops.enable_tx_laser = NULL; mac->ops.flap_tx_laser = NULL; + mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber; + mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_x550em; + mac->ops.set_rate_select_speed = + ixgbe_set_soft_rate_select_speed; break; case ixgbe_media_type_copper: mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em; @@ -1018,53 +1389,18 @@ static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) */ static s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw) { - bool setup_linear; - u16 reg_slice, edc_mode; - s32 ret_val; + s32 status; + bool linear; - switch (hw->phy.sfp_type) { - case ixgbe_sfp_type_unknown: - return 0; - case ixgbe_sfp_type_not_present: - return IXGBE_ERR_SFP_NOT_PRESENT; - case ixgbe_sfp_type_da_cu_core0: - case ixgbe_sfp_type_da_cu_core1: - setup_linear = true; - break; - case ixgbe_sfp_type_srlr_core0: - case ixgbe_sfp_type_srlr_core1: - case ixgbe_sfp_type_da_act_lmt_core0: - case ixgbe_sfp_type_da_act_lmt_core1: - case ixgbe_sfp_type_1g_sx_core0: - case ixgbe_sfp_type_1g_sx_core1: - setup_linear = false; - break; - default: - return IXGBE_ERR_SFP_NOT_SUPPORTED; - } + /* Check if SFP module is supported */ + status = ixgbe_supported_sfp_modules_X550em(hw, &linear); + if (status) + return status; ixgbe_init_mac_link_ops_X550em(hw); hw->phy.ops.reset = NULL; - /* The CS4227 slice address is the base address + the port-pair reg - * offset. I.e. Slice 0 = 0x12B0 and slice 1 = 0x22B0. - */ - reg_slice = IXGBE_CS4227_SPARE24_LSB + (hw->bus.lan_id << 12); - - if (setup_linear) - edc_mode = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; - else - edc_mode = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; - - /* Configure CS4227 for connection type. */ - ret_val = hw->phy.ops.write_i2c_combined(hw, IXGBE_CS4227, reg_slice, - edc_mode); - - if (ret_val) - ret_val = hw->phy.ops.write_i2c_combined(hw, 0x80, reg_slice, - edc_mode); - - return ret_val; + return 0; } /** ixgbe_get_link_capabilities_x550em - Determines link capabilities @@ -1927,6 +2263,62 @@ static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (u32)(pfflp >> 32)); } +/** + * ixgbe_set_mux - Set mux for port 1 access with CS4227 + * @hw: pointer to hardware structure + * @state: set mux if 1, clear if 0 + */ +static void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state) +{ + u32 esdp; + + if (!hw->bus.lan_id) + return; + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (state) + esdp |= IXGBE_ESDP_SDP1; + else + esdp &= ~IXGBE_ESDP_SDP1; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SWFW semaphore and sets the I2C MUX + */ +static s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) +{ + s32 status; + + status = ixgbe_acquire_swfw_sync_X540(hw, mask); + if (status) + return status; + + if (mask & IXGBE_GSSR_I2C_MASK) + ixgbe_set_mux(hw, 1); + + return 0; +} + +/** + * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release + * + * Releases the SWFW semaphore and sets the I2C MUX + */ +static void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) +{ + if (mask & IXGBE_GSSR_I2C_MASK) + ixgbe_set_mux(hw, 0); + + ixgbe_release_swfw_sync_X540(hw, mask); +} + #define X550_COMMON_MAC \ .init_hw = &ixgbe_init_hw_generic, \ .start_hw = &ixgbe_start_hw_X540, \ @@ -1964,8 +2356,6 @@ static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, &ixgbe_set_source_address_pruning_X550, \ .set_ethertype_anti_spoofing = \ &ixgbe_set_ethertype_anti_spoofing_X550, \ - .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540, \ - .release_swfw_sync = &ixgbe_release_swfw_sync_X540, \ .disable_rx_buff = &ixgbe_disable_rx_buff_generic, \ .enable_rx_buff = &ixgbe_enable_rx_buff_generic, \ .get_thermal_sensor_data = NULL, \ @@ -1985,6 +2375,8 @@ static struct ixgbe_mac_operations mac_ops_X550 = { .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic, .get_bus_info = &ixgbe_get_bus_info_generic, .setup_sfp = NULL, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540, + .release_swfw_sync = &ixgbe_release_swfw_sync_X540, }; static struct ixgbe_mac_operations mac_ops_X550EM_x = { @@ -1997,7 +2389,8 @@ static struct ixgbe_mac_operations mac_ops_X550EM_x = { .get_link_capabilities = &ixgbe_get_link_capabilities_X550em, .get_bus_info = &ixgbe_get_bus_info_X550em, .setup_sfp = ixgbe_setup_sfp_modules_X550em, - + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X550em, + .release_swfw_sync = &ixgbe_release_swfw_sync_X550em, }; #define X550_COMMON_EEP \ |