diff options
| -rw-r--r-- | drivers/pinctrl/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/pinctrl/Makefile | 1 | ||||
| -rw-r--r-- | drivers/pinctrl/pinconf-generic.c | 120 | ||||
| -rw-r--r-- | drivers/pinctrl/pinconf.c | 6 | ||||
| -rw-r--r-- | drivers/pinctrl/pinconf.h | 43 | ||||
| -rw-r--r-- | include/linux/pinctrl/pinconf-generic.h | 114 | ||||
| -rw-r--r-- | include/linux/pinctrl/pinconf.h | 5 |
7 files changed, 289 insertions, 4 deletions
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index c6d29ff61d7e..07f3d8d38580 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -17,6 +17,10 @@ config PINMUX config PINCONF bool "Support pin configuration controllers" +config GENERIC_PINCONF + bool + select PINCONF + config DEBUG_PINCTRL bool "Debug PINCTRL calls" depends on DEBUG_KERNEL diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 754329b9c611..6d4150b4eced 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -5,6 +5,7 @@ ccflags-$(CONFIG_DEBUG_PINCTRL) += -DDEBUG obj-$(CONFIG_PINCTRL) += core.o obj-$(CONFIG_PINMUX) += pinmux.o obj-$(CONFIG_PINCONF) += pinconf.o +obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o obj-$(CONFIG_PINCTRL_PXA3xx) += pinctrl-pxa3xx.o obj-$(CONFIG_PINCTRL_MMP2) += pinctrl-mmp2.o obj-$(CONFIG_PINCTRL_PXA168) += pinctrl-pxa168.o diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c new file mode 100644 index 000000000000..33fbaeaa65dd --- /dev/null +++ b/drivers/pinctrl/pinconf-generic.c @@ -0,0 +1,120 @@ +/* + * Core driver for the generic pin config portions of the pin control subsystem + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#define pr_fmt(fmt) "generic pinconfig core: " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/slab.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> +#include "core.h" +#include "pinconf.h" + +#ifdef CONFIG_DEBUG_FS + +struct pin_config_item { + const enum pin_config_param param; + const char * const display; + const char * const format; +}; + +#define PCONFDUMP(a, b, c) { .param = a, .display = b, .format = c } + +struct pin_config_item conf_items[] = { + PCONFDUMP(PIN_CONFIG_BIAS_DISABLE, "input bias disabled", NULL), + PCONFDUMP(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, "input bias high impedance", NULL), + PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up", NULL), + PCONFDUMP(PIN_CONFIG_BIAS_PULL_DOWN, "input bias pull down", NULL), + PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL), + PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL), + PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL), + PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL), + PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce", "time units"), + PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector"), + PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode"), +}; + +void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev, + struct seq_file *s, unsigned pin) +{ + const struct pinconf_ops *ops = pctldev->desc->confops; + int i; + + if (!ops->is_generic) + return; + + for(i = 0; i < ARRAY_SIZE(conf_items); i++) { + unsigned long config; + int ret; + + /* We want to check out this parameter */ + config = pinconf_to_config_packed(conf_items[i].param, 0); + ret = pin_config_get_for_pin(pctldev, pin, &config); + /* These are legal errors */ + if (ret == -EINVAL || ret == -ENOTSUPP) + continue; + if (ret) { + seq_printf(s, "ERROR READING CONFIG SETTING %d ", i); + continue; + } + /* Space between multiple configs */ + seq_puts(s, " "); + seq_puts(s, conf_items[i].display); + /* Print unit if available */ + if (conf_items[i].format && + pinconf_to_config_argument(config) != 0) + seq_printf(s, " (%u %s)", + pinconf_to_config_argument(config), + conf_items[i].format); + } +} + +void pinconf_generic_dump_group(struct pinctrl_dev *pctldev, + struct seq_file *s, const char *gname) +{ + const struct pinconf_ops *ops = pctldev->desc->confops; + int i; + + if (!ops->is_generic) + return; + + for(i = 0; i < ARRAY_SIZE(conf_items); i++) { + unsigned long config; + int ret; + + /* We want to check out this parameter */ + config = pinconf_to_config_packed(conf_items[i].param, 0); + ret = pin_config_group_get(dev_name(pctldev->dev), gname, + &config); + /* These are legal errors */ + if (ret == -EINVAL || ret == -ENOTSUPP) + continue; + if (ret) { + seq_printf(s, "ERROR READING CONFIG SETTING %d ", i); + continue; + } + /* Space between multiple configs */ + seq_puts(s, " "); + seq_puts(s, conf_items[i].display); + /* Print unit if available */ + if (conf_items[i].format && config != 0) + seq_printf(s, " (%u %s)", + pinconf_to_config_argument(config), + conf_items[i].format); + } +} + +#endif diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index b40ac1b4fb17..7321e8601294 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -54,7 +54,7 @@ int pinconf_validate_map(struct pinctrl_map const *map, int i) return 0; } -static int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin, +int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin, unsigned long *config) { const struct pinconf_ops *ops = pctldev->desc->confops; @@ -439,6 +439,8 @@ static void pinconf_dump_pin(struct pinctrl_dev *pctldev, { const struct pinconf_ops *ops = pctldev->desc->confops; + /* no-op when not using generic pin config */ + pinconf_generic_dump_pin(pctldev, s, pin); if (ops && ops->pin_config_dbg_show) ops->pin_config_dbg_show(pctldev, s, pin); } @@ -482,6 +484,8 @@ static void pinconf_dump_group(struct pinctrl_dev *pctldev, { const struct pinconf_ops *ops = pctldev->desc->confops; + /* no-op when not using generic pin config */ + pinconf_generic_dump_group(pctldev, s, gname); if (ops && ops->pin_config_group_dbg_show) ops->pin_config_group_dbg_show(pctldev, s, selector); } diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h index 0ded227661a5..54510de5e8c6 100644 --- a/drivers/pinctrl/pinconf.h +++ b/drivers/pinctrl/pinconf.h @@ -14,20 +14,26 @@ #ifdef CONFIG_PINCONF int pinconf_check_ops(struct pinctrl_dev *pctldev); - int pinconf_validate_map(struct pinctrl_map const *map, int i); - int pinconf_map_to_setting(struct pinctrl_map const *map, struct pinctrl_setting *setting); void pinconf_free_setting(struct pinctrl_setting const *setting); int pinconf_apply_setting(struct pinctrl_setting const *setting); - void pinconf_show_map(struct seq_file *s, struct pinctrl_map const *map); void pinconf_show_setting(struct seq_file *s, struct pinctrl_setting const *setting); void pinconf_init_device_debugfs(struct dentry *devroot, struct pinctrl_dev *pctldev); +/* + * You will only be interested in these if you're using PINCONF + * so don't supply any stubs for these. + */ +int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin, + unsigned long *config); +int pin_config_group_get(const char *dev_name, const char *pin_group, + unsigned long *config); + #else static inline int pinconf_check_ops(struct pinctrl_dev *pctldev) @@ -71,3 +77,34 @@ static inline void pinconf_init_device_debugfs(struct dentry *devroot, } #endif + +/* + * The following functions are available if the driver uses the generic + * pin config. + */ + +#ifdef CONFIG_GENERIC_PINCONF + +void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev, + struct seq_file *s, unsigned pin); + +void pinconf_generic_dump_group(struct pinctrl_dev *pctldev, + struct seq_file *s, const char *gname); + +#else + +static inline void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev, + struct seq_file *s, + unsigned pin) +{ + return; +} + +static inline void pinconf_generic_dump_group(struct pinctrl_dev *pctldev, + struct seq_file *s, + const char *gname) +{ + return; +} + +#endif diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h new file mode 100644 index 000000000000..4f0abb9f1c09 --- /dev/null +++ b/include/linux/pinctrl/pinconf-generic.h @@ -0,0 +1,114 @@ +/* + * Interface the generic pinconfig portions of the pinctrl subsystem + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * This interface is used in the core to keep track of pins. + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __LINUX_PINCTRL_PINCONF_GENERIC_H +#define __LINUX_PINCTRL_PINCONF_GENERIC_H + +/* + * You shouldn't even be able to compile with these enums etc unless you're + * using generic pin config. That is why this is defined out. + */ +#ifdef CONFIG_GENERIC_PINCONF + +/** + * enum pin_config_param - possible pin configuration parameters + * @PIN_CONFIG_BIAS_DISABLE: disable any pin bias on the pin, a + * transition from say pull-up to pull-down implies that you disable + * pull-up in the process, this setting disables all biasing. + * @PIN_CONFIG_BIAS_HIGH_IMPEDANCE: the pin will be set to a high impedance + * mode, also know as "third-state" (tristate) or "high-Z" or "floating". + * On output pins this effectively disconnects the pin, which is useful + * if for example some other pin is going to drive the signal connected + * to it for a while. Pins used for input are usually always high + * impedance. + * @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high + * impedance to VDD). If the argument is != 0 pull-up is enabled, + * if it is 0, pull-up is disabled. + * @PIN_CONFIG_BIAS_PULL_DOWN: the pin will be pulled down (usually with high + * impedance to GROUND). If the argument is != 0 pull-down is enabled, + * if it is 0, pull-down is disabled. + * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and + * low, this is the most typical case and is typically achieved with two + * active transistors on the output. Sending this config will enabale + * push-pull mode, the argument is ignored. + * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open + * collector) which means it is usually wired with other output ports + * which are then pulled up with an external resistor. Sending this + * config will enabale open drain mode, the argument is ignored. + * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source + * (open emitter). Sending this config will enabale open drain mode, the + * argument is ignored. + * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in + * schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis, + * the threshold value is given on a custom format as argument when + * setting pins to this mode. The argument zero turns the schmitt trigger + * off. + * @PIN_CONFIG_INPUT_DEBOUNCE: this will configure the pin to debounce mode, + * which means it will wait for signals to settle when reading inputs. The + * argument gives the debounce time on a custom format. Setting the + * argument to zero turns debouncing off. + * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power + * supplies, the argument to this parameter (on a custom format) tells + * the driver which alternative power source to use. + * @PIN_CONFIG_LOW_POWER_MODE: this will configure the pin for low power + * operation, if several modes of operation are supported these can be + * passed in the argument on a custom form, else just use argument 1 + * to indicate low power mode, argument 0 turns low power mode off. + * @PIN_CONFIG_END: this is the last enumerator for pin configurations, if + * you need to pass in custom configurations to the pin controller, use + * PIN_CONFIG_END+1 as the base offset. + */ +enum pin_config_param { + PIN_CONFIG_BIAS_DISABLE, + PIN_CONFIG_BIAS_HIGH_IMPEDANCE, + PIN_CONFIG_BIAS_PULL_UP, + PIN_CONFIG_BIAS_PULL_DOWN, + PIN_CONFIG_DRIVE_PUSH_PULL, + PIN_CONFIG_DRIVE_OPEN_DRAIN, + PIN_CONFIG_DRIVE_OPEN_SOURCE, + PIN_CONFIG_INPUT_SCHMITT, + PIN_CONFIG_INPUT_DEBOUNCE, + PIN_CONFIG_POWER_SOURCE, + PIN_CONFIG_LOW_POWER_MODE, + PIN_CONFIG_END = 0x7FFF, +}; + +/* + * Helpful configuration macro to be used in tables etc. + */ +#define PIN_CONF_PACKED(p, a) ((a << 16) | ((unsigned long) p & 0xffffUL)) + +/* + * The following inlines stuffs a configuration parameter and data value + * into and out of an unsigned long argument, as used by the generic pin config + * system. We put the parameter in the lower 16 bits and the argument in the + * upper 16 bits. + */ + +static inline enum pin_config_param pinconf_to_config_param(unsigned long config) +{ + return (enum pin_config_param) (config & 0xffffUL); +} + +static inline u16 pinconf_to_config_argument(unsigned long config) +{ + return (enum pin_config_param) ((config >> 16) & 0xffffUL); +} + +static inline unsigned long pinconf_to_config_packed(enum pin_config_param param, + u16 argument) +{ + return PIN_CONF_PACKED(param, argument); +} + +#endif /* CONFIG_GENERIC_PINCONF */ + +#endif /* __LINUX_PINCTRL_PINCONF_GENERIC_H */ diff --git a/include/linux/pinctrl/pinconf.h b/include/linux/pinctrl/pinconf.h index f8cf156873d7..ec431f03362d 100644 --- a/include/linux/pinctrl/pinconf.h +++ b/include/linux/pinctrl/pinconf.h @@ -20,6 +20,8 @@ struct seq_file; /** * struct pinconf_ops - pin config operations, to be implemented by * pin configuration capable drivers. + * @is_generic: for pin controllers that want to use the generic interface, + * this flag tells the framework that it's generic. * @pin_config_get: get the config of a certain pin, if the requested config * is not available on this controller this should return -ENOTSUPP * and if it is available but disabled it should return -EINVAL @@ -33,6 +35,9 @@ struct seq_file; * per-device info for a certain group in debugfs */ struct pinconf_ops { +#ifdef CONFIG_GENERIC_PINCONF + bool is_generic; +#endif int (*pin_config_get) (struct pinctrl_dev *pctldev, unsigned pin, unsigned long *config); |