diff options
| -rw-r--r-- | Documentation/devicetree/bindings/thermal/exynos-thermal.txt | 21 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/thermal/thermal.txt | 74 | ||||
| -rw-r--r-- | drivers/cpufreq/Kconfig.arm | 44 | ||||
| -rw-r--r-- | drivers/cpufreq/Makefile | 9 | ||||
| -rw-r--r-- | drivers/cpufreq/exynos-cpufreq.c | 33 | ||||
| -rw-r--r-- | drivers/thermal/of-thermal.c | 3 | ||||
| -rw-r--r-- | drivers/thermal/rockchip_thermal.c | 36 | ||||
| -rw-r--r-- | drivers/thermal/samsung/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/thermal/samsung/Makefile | 2 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_thermal_common.c | 427 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_thermal_common.h | 106 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_tmu.c | 553 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_tmu.h | 77 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_tmu_data.c | 264 | ||||
| -rw-r--r-- | include/dt-bindings/thermal/thermal_exynos.h | 28 |
15 files changed, 596 insertions, 1090 deletions
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index ae738f562acc..695150a4136b 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -12,6 +12,7 @@ "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4 Exynos5420 (Must pass triminfo base and triminfo clock) "samsung,exynos5440-tmu" + "samsung,exynos7-tmu" - interrupt-parent : The phandle for the interrupt controller - reg : Address range of the thermal registers. For soc's which has multiple instances of TMU and some registers are shared across all TMU's like @@ -32,13 +33,28 @@ - clocks : The main clocks for TMU device -- 1. operational clock for TMU channel -- 2. optional clock to access the shared registers of TMU channel + -- 3. optional special clock for functional operation - clock-names : Thermal system clock name -- "tmu_apbif" operational clock for current TMU channel -- "tmu_triminfo_apbif" clock to access the shared triminfo register for current TMU channel + -- "tmu_sclk" clock for functional operation of the current TMU + channel - vtmu-supply: This entry is optional and provides the regulator node supplying voltage to TMU. If needed this entry can be placed inside board/platform specific dts file. +Following properties are mandatory (depending on SoC): +- samsung,tmu_gain: Gain value for internal TMU operation. +- samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage +- samsung,tmu_noise_cancel_mode: Mode for noise cancellation +- samsung,tmu_efuse_value: Default level of temperature - it is needed when + in factory fusing produced wrong value +- samsung,tmu_min_efuse_value: Minimum temperature fused value +- samsung,tmu_max_efuse_value: Maximum temperature fused value +- samsung,tmu_first_point_trim: First point trimming value +- samsung,tmu_second_point_trim: Second point trimming value +- samsung,tmu_default_temp_offset: Default temperature offset +- samsung,tmu_cal_type: Callibration type Example 1): @@ -51,6 +67,7 @@ Example 1): clock-names = "tmu_apbif"; status = "disabled"; vtmu-supply = <&tmu_regulator_node>; + #include "exynos4412-tmu-sensor-conf.dtsi" }; Example 2): @@ -61,6 +78,7 @@ Example 2): interrupts = <0 58 0>; clocks = <&clock 21>; clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" }; Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") @@ -70,6 +88,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") interrupts = <0 184 0>; clocks = <&clock 318>, <&clock 318>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_cpu3: tmu@1006c000 { @@ -78,6 +97,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") interrupts = <0 185 0>; clocks = <&clock 318>, <&clock 319>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; tmu_gpu: tmu@100a0000 { @@ -86,6 +106,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") interrupts = <0 215 0>; clocks = <&clock 319>, <&clock 318>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; Note: For multi-instance tmu each instance should have an alias correctly diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt index f5db6b72a36f..29fe0bfae38e 100644 --- a/Documentation/devicetree/bindings/thermal/thermal.txt +++ b/Documentation/devicetree/bindings/thermal/thermal.txt @@ -251,24 +251,24 @@ ocp { }; thermal-zones { - cpu-thermal: cpu-thermal { + cpu_thermal: cpu-thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */ thermal-sensors = <&bandgap0>; trips { - cpu-alert0: cpu-alert { + cpu_alert0: cpu-alert0 { temperature = <90000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "active"; }; - cpu-alert1: cpu-alert { + cpu_alert1: cpu-alert1 { temperature = <100000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "passive"; }; - cpu-crit: cpu-crit { + cpu_crit: cpu-crit { temperature = <125000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "critical"; @@ -277,17 +277,17 @@ thermal-zones { cooling-maps { map0 { - trip = <&cpu-alert0>; - cooling-device = <&fan0 THERMAL_NO_LIMITS 4>; + trip = <&cpu_alert0>; + cooling-device = <&fan0 THERMAL_NO_LIMIT 4>; }; map1 { - trip = <&cpu-alert1>; - cooling-device = <&fan0 5 THERMAL_NO_LIMITS>; + trip = <&cpu_alert1>; + cooling-device = <&fan0 5 THERMAL_NO_LIMIT>; }; map2 { - trip = <&cpu-alert1>; + trip = <&cpu_alert1>; cooling-device = - <&cpu0 THERMAL_NO_LIMITS THERMAL_NO_LIMITS>; + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -298,13 +298,13 @@ used to monitor the zone 'cpu-thermal' using its sole sensor. A fan device (fan0) is controlled via I2C bus 1, at address 0x48, and has ten different cooling states 0-9. It is used to remove the heat out of the thermal zone 'cpu-thermal' using its cooling states -from its minimum to 4, when it reaches trip point 'cpu-alert0' +from its minimum to 4, when it reaches trip point 'cpu_alert0' at 90C, as an example of active cooling. The same cooling device is used at -'cpu-alert1', but from 5 to its maximum state. The cpu@0 device is also +'cpu_alert1', but from 5 to its maximum state. The cpu@0 device is also linked to the same thermal zone, 'cpu-thermal', as a passive cooling device, -using all its cooling states at trip point 'cpu-alert1', +using all its cooling states at trip point 'cpu_alert1', which is a trip point at 100C. On the thermal zone 'cpu-thermal', at the -temperature of 125C, represented by the trip point 'cpu-crit', the silicon +temperature of 125C, represented by the trip point 'cpu_crit', the silicon is not reliable anymore. (b) - IC with several internal sensors @@ -329,7 +329,7 @@ ocp { }; thermal-zones { - cpu-thermal: cpu-thermal { + cpu_thermal: cpu-thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */ @@ -338,12 +338,12 @@ thermal-zones { trips { /* each zone within the SoC may have its own trips */ - cpu-alert: cpu-alert { + cpu_alert: cpu-alert { temperature = <100000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "passive"; }; - cpu-crit: cpu-crit { + cpu_crit: cpu-crit { temperature = <125000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "critical"; @@ -356,7 +356,7 @@ thermal-zones { }; }; - gpu-thermal: gpu-thermal { + gpu_thermal: gpu-thermal { polling-delay-passive = <120>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */ @@ -365,12 +365,12 @@ thermal-zones { trips { /* each zone within the SoC may have its own trips */ - gpu-alert: gpu-alert { + gpu_alert: gpu-alert { temperature = <90000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "passive"; }; - gpu-crit: gpu-crit { + gpu_crit: gpu-crit { temperature = <105000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "critical"; @@ -383,7 +383,7 @@ thermal-zones { }; }; - dsp-thermal: dsp-thermal { + dsp_thermal: dsp-thermal { polling-delay-passive = <50>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */ @@ -392,12 +392,12 @@ thermal-zones { trips { /* each zone within the SoC may have its own trips */ - dsp-alert: gpu-alert { + dsp_alert: dsp-alert { temperature = <90000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "passive"; }; - dsp-crit: gpu-crit { + dsp_crit: gpu-crit { temperature = <135000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "critical"; @@ -457,7 +457,7 @@ ocp { }; thermal-zones { - cpu-thermal: cpu-thermal { + cpu_thermal: cpu-thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */ @@ -508,7 +508,7 @@ with many sensors and many cooling devices. /* * An IC with several temperature sensor. */ - adc-dummy: sensor@0x50 { + adc_dummy: sensor@0x50 { ... #thermal-sensor-cells = <1>; /* sensor internal ID */ }; @@ -520,7 +520,7 @@ thermal-zones { polling-delay = <2500>; /* milliseconds */ /* sensor ID */ - thermal-sensors = <&adc-dummy 4>; + thermal-sensors = <&adc_dummy 4>; trips { ... @@ -531,14 +531,14 @@ thermal-zones { }; }; - board-thermal: board-thermal { + board_thermal: board-thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <2500>; /* milliseconds */ /* sensor ID */ - thermal-sensors = <&adc-dummy 0>, /* pcb top edge */ - <&adc-dummy 1>, /* lcd */ - <&adc-dymmy 2>; /* back cover */ + thermal-sensors = <&adc_dummy 0>, /* pcb top edge */ + <&adc_dummy 1>, /* lcd */ + <&adc_dummy 2>; /* back cover */ /* * An array of coefficients describing the sensor * linear relation. E.g.: @@ -548,22 +548,22 @@ thermal-zones { trips { /* Trips are based on resulting linear equation */ - cpu-trip: cpu-trip { + cpu_trip: cpu-trip { temperature = <60000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "passive"; }; - gpu-trip: gpu-trip { + gpu_trip: gpu-trip { temperature = <55000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "passive"; } - lcd-trip: lcp-trip { + lcd_trip: lcp-trip { temperature = <53000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "passive"; }; - crit-trip: crit-trip { + crit_trip: crit-trip { temperature = <68000>; /* millicelsius */ hysteresis = <2000>; /* millicelsius */ type = "critical"; @@ -572,17 +572,17 @@ thermal-zones { cooling-maps { map0 { - trip = <&cpu-trip>; + trip = <&cpu_trip>; cooling-device = <&cpu0 0 2>; contribution = <55>; }; map1 { - trip = <&gpu-trip>; + trip = <&gpu_trip>; cooling-device = <&gpu0 0 2>; contribution = <20>; }; map2 { - trip = <&lcd-trip>; + trip = <&lcd_trip>; cooling-device = <&lcd0 5 10>; contribution = <15>; }; diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 0f9a2c3c0e0d..1b06fc4640e2 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -26,13 +26,21 @@ config ARM_VEXPRESS_SPC_CPUFREQ config ARM_EXYNOS_CPUFREQ - bool + tristate "SAMSUNG EXYNOS CPUfreq Driver" + depends on CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250 + depends on THERMAL + help + This adds the CPUFreq driver for Samsung EXYNOS platforms. + Supported SoC versions are: + Exynos4210, Exynos4212, Exynos4412, and Exynos5250. + + If in doubt, say N. config ARM_EXYNOS4210_CPUFREQ bool "SAMSUNG EXYNOS4210" depends on CPU_EXYNOS4210 + depends on ARM_EXYNOS_CPUFREQ default y - select ARM_EXYNOS_CPUFREQ help This adds the CPUFreq driver for Samsung EXYNOS4210 SoC (S5PV310 or S5PC210). @@ -42,8 +50,8 @@ config ARM_EXYNOS4210_CPUFREQ config ARM_EXYNOS4X12_CPUFREQ bool "SAMSUNG EXYNOS4x12" depends on SOC_EXYNOS4212 || SOC_EXYNOS4412 + depends on ARM_EXYNOS_CPUFREQ default y - select ARM_EXYNOS_CPUFREQ help This adds the CPUFreq driver for Samsung EXYNOS4X12 SoC (EXYNOS4212 or EXYNOS4412). @@ -53,28 +61,14 @@ config ARM_EXYNOS4X12_CPUFREQ config ARM_EXYNOS5250_CPUFREQ bool "SAMSUNG EXYNOS5250" depends on SOC_EXYNOS5250 + depends on ARM_EXYNOS_CPUFREQ default y - select ARM_EXYNOS_CPUFREQ help This adds the CPUFreq driver for Samsung EXYNOS5250 SoC. If in doubt, say N. -config ARM_EXYNOS5440_CPUFREQ - bool "SAMSUNG EXYNOS5440" - depends on SOC_EXYNOS5440 - depends on HAVE_CLK && OF - select PM_OPP - default y - help - This adds the CPUFreq driver for Samsung EXYNOS5440 - SoC. The nature of exynos5440 clock controller is - different than previous exynos controllers so not using - the common exynos framework. - - If in doubt, say N. - config ARM_EXYNOS_CPU_FREQ_BOOST_SW bool "EXYNOS Frequency Overclocking - Software" depends on ARM_EXYNOS_CPUFREQ && THERMAL @@ -90,6 +84,20 @@ config ARM_EXYNOS_CPU_FREQ_BOOST_SW If in doubt, say N. +config ARM_EXYNOS5440_CPUFREQ + tristate "SAMSUNG EXYNOS5440" + depends on SOC_EXYNOS5440 + depends on HAVE_CLK && OF + select PM_OPP + default y + help + This adds the CPUFreq driver for Samsung EXYNOS5440 + SoC. The nature of exynos5440 clock controller is + different than previous exynos controllers so not using + the common exynos framework. + + If in doubt, say N. + config ARM_HIGHBANK_CPUFREQ tristate "Calxeda Highbank-based" depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 8b4220ac888b..82a1821471fd 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -52,10 +52,11 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o +obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += arm-exynos-cpufreq.o +arm-exynos-cpufreq-y := exynos-cpufreq.o +arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o +arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o +arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c index f99a0b0b7c06..5e98c6b1f284 100644 --- a/drivers/cpufreq/exynos-cpufreq.c +++ b/drivers/cpufreq/exynos-cpufreq.c @@ -18,10 +18,13 @@ #include <linux/cpufreq.h> #include <linux/platform_device.h> #include <linux/of.h> +#include <linux/cpu_cooling.h> +#include <linux/cpu.h> #include "exynos-cpufreq.h" static struct exynos_dvfs_info *exynos_info; +static struct thermal_cooling_device *cdev; static struct regulator *arm_regulator; static unsigned int locking_frequency; @@ -156,6 +159,7 @@ static struct cpufreq_driver exynos_driver = { static int exynos_cpufreq_probe(struct platform_device *pdev) { + struct device_node *cpus, *np; int ret = -EINVAL; exynos_info = kzalloc(sizeof(*exynos_info), GFP_KERNEL); @@ -198,9 +202,36 @@ static int exynos_cpufreq_probe(struct platform_device *pdev) /* Done here as we want to capture boot frequency */ locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000; - if (!cpufreq_register_driver(&exynos_driver)) + ret = cpufreq_register_driver(&exynos_driver); + if (ret) + goto err_cpufreq_reg; + + cpus = of_find_node_by_path("/cpus"); + if (!cpus) { + pr_err("failed to find cpus node\n"); + return 0; + } + + np = of_get_next_child(cpus, NULL); + if (!np) { + pr_err("failed to find cpus child node\n"); + of_node_put(cpus); return 0; + } + + if (of_find_property(np, "#cooling-cells", NULL)) { + cdev = of_cpufreq_cooling_register(np, + cpu_present_mask); + if (IS_ERR(cdev)) + pr_err("running cpufreq without cooling device: %ld\n", + PTR_ERR(cdev)); + } + of_node_put(np); + of_node_put(cpus); + + return 0; +err_cpufreq_reg: dev_err(&pdev->dev, "failed to register cpufreq driver\n"); regulator_put(arm_regulator); err_vdd_arm: diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index d717f3dab6f1..668fb1bdea9e 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -497,6 +497,9 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, void *data, if (sensor_specs.np == sensor_np && id == sensor_id) { tzd = thermal_zone_of_add_sensor(child, sensor_np, data, ops); + if (!IS_ERR(tzd)) + tzd->ops->set_mode(tzd, THERMAL_DEVICE_ENABLED); + of_node_put(sensor_specs.np); of_node_put(child); goto exit; diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 9c6ce548e363..3aa46ac7cdbc 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -193,19 +193,20 @@ static u32 rk_tsadcv2_temp_to_code(long temp) static long rk_tsadcv2_code_to_temp(u32 code) { - int high, low, mid; - - low = 0; - high = ARRAY_SIZE(v2_code_table) - 1; - mid = (high + low) / 2; - - if (code > v2_code_table[low].code || code < v2_code_table[high].code) - return 125000; /* No code available, return max temperature */ + unsigned int low = 0; + unsigned int high = ARRAY_SIZE(v2_code_table) - 1; + unsigned int mid = (low + high) / 2; + unsigned int num; + unsigned long denom; + + /* Invalid code, return -EAGAIN */ + if (code > TSADCV2_DATA_MASK) + return -EAGAIN; - while (low <= high) { - if (code >= v2_code_table[mid].code && code < - v2_code_table[mid - 1].code) - return v2_code_table[mid].temp; + while (low <= high && mid) { + if (code >= v2_code_table[mid].code && + code < v2_code_table[mid - 1].code) + break; else if (code < v2_code_table[mid].code) low = mid + 1; else @@ -213,7 +214,16 @@ static long rk_tsadcv2_code_to_temp(u32 code) mid = (low + high) / 2; } - return 125000; + /* + * The 5C granularity provided by the table is too much. Let's + * assume that the relationship between sensor readings and + * temperature between 2 table entries is linear and interpolate + * to produce less granular result. + */ + num = v2_code_table[mid].temp - v2_code_table[mid - 1].temp; + num *= v2_code_table[mid - 1].code - code; + denom = v2_code_table[mid - 1].code - v2_code_table[mid].code; + return v2_code_table[mid - 1].temp + (num / denom); } /** diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig index c43306ecc0ab..c8e35c1a43dc 100644 --- a/drivers/thermal/samsung/Kconfig +++ b/drivers/thermal/samsung/Kconfig @@ -7,12 +7,3 @@ config EXYNOS_THERMAL the TMU, reports temperature and handles cooling action if defined. This driver uses the Exynos core thermal APIs and TMU configuration data from the supported SoCs. - -config EXYNOS_THERMAL_CORE - bool "Core thermal framework support for EXYNOS SOCs" - depends on EXYNOS_THERMAL - help - If you say yes here you get support for EXYNOS TMU - (Thermal Management Unit) common registration/unregistration - functions to the core thermal layer and also to use the generic - CPU cooling APIs. diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile index c09d83095dc2..1e47d0d89ce0 100644 --- a/drivers/thermal/samsung/Makefile +++ b/drivers/thermal/samsung/Makefile @@ -3,5 +3,3 @@ # obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o exynos_thermal-y := exynos_tmu.o -exynos_thermal-y += exynos_tmu_data.o -exynos_thermal-$(CONFIG_EXYNOS_THERMAL_CORE) += exynos_thermal_common.o diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c deleted file mode 100644 index 6dc3815cc73f..000000000000 --- a/drivers/thermal/samsung/exynos_thermal_common.c +++ /dev/null @@ -1,427 +0,0 @@ -/* - * exynos_thermal_common.c - Samsung EXYNOS common thermal file - * - * Copyright (C) 2013 Samsung Electronics - * Amit Daniel Kachhap <amit.daniel@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/cpu_cooling.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/thermal.h> - -#include "exynos_thermal_common.h" - -struct exynos_thermal_zone { - enum thermal_device_mode mode; - struct thermal_zone_device *therm_dev; - struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE]; - unsigned int cool_dev_size; - struct platform_device *exynos4_dev; - struct thermal_sensor_conf *sensor_conf; - bool bind; -}; - -/* Get mode callback functions for thermal zone */ -static int exynos_get_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode *mode) -{ - struct exynos_thermal_zone *th_zone = thermal->devdata; - if (th_zone) - *mode = th_zone->mode; - return 0; -} - -/* Set mode callback functions for thermal zone */ -static int exynos_set_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode mode) -{ - struct exynos_thermal_zone *th_zone = thermal->devdata; - if (!th_zone) { - dev_err(&thermal->device, - "thermal zone not registered\n"); - return 0; - } - - mutex_lock(&thermal->lock); - - if (mode == THERMAL_DEVICE_ENABLED && - !th_zone->sensor_conf->trip_data.trigger_falling) - thermal->polling_delay = IDLE_INTERVAL; - else - thermal->polling_delay = 0; - - mutex_unlock(&thermal->lock); - - th_zone->mode = mode; - thermal_zone_device_update(thermal); - dev_dbg(th_zone->sensor_conf->dev, - "thermal polling set for duration=%d msec\n", - thermal->polling_delay); - return 0; -} - - -/* Get trip type callback functions for thermal zone */ -static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip, - enum thermal_trip_type *type) -{ - struct exynos_thermal_zone *th_zone = thermal->devdata; - int max_trip = th_zone->sensor_conf->trip_data.trip_count; - int trip_type; - - if (trip < 0 || trip >= max_trip) - return -EINVAL; - - trip_type = th_zone->sensor_conf->trip_data.trip_type[trip]; - - if (trip_type == SW_TRIP) - *type = THERMAL_TRIP_CRITICAL; - else if (trip_type == THROTTLE_ACTIVE) - *type = THERMAL_TRIP_ACTIVE; - else if (trip_type == THROTTLE_PASSIVE) - *type = THERMAL_TRIP_PASSIVE; - else - return -EINVAL; - - return 0; -} - -/* Get trip temperature callback functions for thermal zone */ -static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip, - unsigned long *temp) -{ - struct exynos_thermal_zone *th_zone = thermal->devdata; - int max_trip = th_zone->sensor_conf->trip_data.trip_count; - - if (trip < 0 || trip >= max_trip) - return -EINVAL; - - *temp = th_zone->sensor_conf->trip_data.trip_val[trip]; - /* convert the temperature into millicelsius */ - *temp = *temp * MCELSIUS; - - return 0; -} - -/* Get critical temperature callback functions for thermal zone */ -static int exynos_get_crit_temp(struct thermal_zone_device *thermal, - unsigned long *temp) -{ - struct exynos_thermal_zone *th_zone = thermal->devdata; - int max_trip = th_zone->sensor_conf->trip_data.trip_count; - /* Get the temp of highest trip*/ - return exynos_get_trip_temp(thermal, max_trip - 1, temp); -} - -/* Bind callback functions for thermal zone */ -static int exynos_bind(struct thermal_zone_device *thermal, - struct thermal_cooling_device *cdev) -{ - int ret = 0, i, tab_size, level; - struct freq_clip_table *tab_ptr, *clip_data; - struct exynos_thermal_zone *th_zone = thermal->devdata; - struct thermal_sensor_conf *data = th_zone->sensor_conf; - - tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data; - tab_size = data->cooling_data.freq_clip_count; - - if (tab_ptr == NULL || tab_size == 0) - return 0; - - /* find the cooling device registered*/ - for (i = 0; i < th_zone->cool_dev_size; i++) - if (cdev == th_zone->cool_dev[i]) - break; - - /* No matching cooling device */ - if (i == th_zone->cool_dev_size) - return 0; - - /* Bind the thermal zone to the cpufreq cooling device */ - for (i = 0; i < tab_size; i++) { - clip_data = (struct freq_clip_table *)&(tab_ptr[i]); - level = cpufreq_cooling_get_level(0, clip_data->freq_clip_max); - if (level == THERMAL_CSTATE_INVALID) - return 0; - switch (GET_ZONE(i)) { - case MONITOR_ZONE: - case WARN_ZONE: - if (thermal_zone_bind_cooling_device(thermal, i, cdev, - level, 0)) { - dev_err(data->dev, - "error unbinding cdev inst=%d\n", i); - ret = -EINVAL; - } - th_zone->bind = true; - break; - default: - ret = -EINVAL; - } - } - - return ret; -} - -/* Unbind callback functions for thermal zone */ -static int exynos_unbind(struct thermal_zone_device *thermal, - struct thermal_cooling_device *cdev) -{ - int ret = 0, i, tab_size; - struct exynos_thermal_zone *th_zone = thermal->devdata; - struct thermal_sensor_conf *data = th_zone->sensor_conf; - - if (th_zone->bind == false) - return 0; - - tab_size = data->cooling_data.freq_clip_count; - - if (tab_size == 0) - return 0; - - /* find the cooling device registered*/ - for (i = 0; i < th_zone->cool_dev_size; i++) - if (cdev == th_zone->cool_dev[i]) - break; - - /* No matching cooling device */ - if (i == th_zone->cool_dev_size) - return 0; - - /* Bind the thermal zone to the cpufreq cooling device */ - for (i = 0; i < tab_size; i++) { - switch (GET_ZONE(i)) { - case MONITOR_ZONE: - case WARN_ZONE: - if (thermal_zone_unbind_cooling_device(thermal, i, - cdev)) { - dev_err(data->dev, - "error unbinding cdev inst=%d\n", i); - ret = -EINVAL; - } - th_zone->bind = false; - break; - default: - ret = -EINVAL; - } - } - return ret; -} - -/* Get temperature callback functions for thermal zone */ -static int exynos_get_temp(struct thermal_zone_device *thermal, - unsigned long *temp) -{ - struct exynos_thermal_zone *th_zone = thermal->devdata; - void *data; - - if (!th_zone->sensor_conf) { - dev_err(&thermal->device, - "Temperature sensor not initialised\n"); - return -EINVAL; - } - data = th_zone->sensor_conf->driver_data; - *temp = th_zone->sensor_conf->read_temperature(data); - /* convert the temperature into millicelsius */ - *temp = *temp * MCELSIUS; - return 0; -} - -/* Get temperature callback functions for thermal zone */ -static int exynos_set_emul_temp(struct thermal_zone_device *thermal, - unsigned long temp) -{ - void *data; - int ret = -EINVAL; - struct exynos_thermal_zone *th_zone = thermal->devdata; - - if (!th_zone->sensor_conf) { - dev_err(&thermal->device, - "Temperature sensor not initialised\n"); - return -EINVAL; - } - data = th_zone->sensor_conf->driver_data; - if (th_zone->sensor_conf->write_emul_temp) - ret = th_zone->sensor_conf->write_emul_temp(data, temp); - return ret; -} - -/* Get the temperature trend */ -static int exynos_get_trend(struct thermal_zone_device *thermal, - int trip, enum thermal_trend *trend) -{ - int ret; - unsigned long trip_temp; - - ret = exynos_get_trip_temp(thermal, trip, &trip_temp); - if (ret < 0) - return ret; - - if (thermal->temperature >= trip_temp) - *trend = THERMAL_TREND_RAISE_FULL; - else - *trend = THERMAL_TREND_DROP_FULL; - - return 0; -} -/* Operation callback functions for thermal zone */ -static struct thermal_zone_device_ops exynos_dev_ops = { - .bind = exynos_bind, - .unbind = exynos_unbind, - .get_temp = exynos_get_temp, - .set_emul_temp = exynos_set_emul_temp, - .get_trend = exynos_get_trend, - .get_mode = exynos_get_mode, - .set_mode = exynos_set_mode, - .get_trip_type = exynos_get_trip_type, - .get_trip_temp = exynos_get_trip_temp, - .get_crit_temp = exynos_get_crit_temp, -}; - -/* - * This function may be called from interrupt based temperature sensor - * when threshold is changed. - */ -void exynos_report_trigger(struct thermal_sensor_conf *conf) -{ - unsigned int i; - char data[10]; - char *envp[] = { data, NULL }; - struct exynos_thermal_zone *th_zone; - - if (!conf || !conf->pzone_data) { - pr_err("Invalid temperature sensor configuration data\n"); - return; - } - - th_zone = conf->pzone_data; - - if (th_zone->bind == false) { - for (i = 0; i < th_zone->cool_dev_size; i++) { - if (!th_zone->cool_dev[i]) - continue; - exynos_bind(th_zone->therm_dev, - th_zone->cool_dev[i]); - } - } - - thermal_zone_device_update(th_zone->therm_dev); - - mutex_lock(&th_zone->therm_dev->lock); - /* Find the level for which trip happened */ - for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) { - if (th_zone->therm_dev->last_temperature < - th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS) - break; - } - - if (th_zone->mode == THERMAL_DEVICE_ENABLED && - !th_zone->sensor_conf->trip_data.trigger_falling) { - if (i > 0) - th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL; - else - th_zone->therm_dev->polling_delay = IDLE_INTERVAL; - } - - snprintf(data, sizeof(data), "%u", i); - kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp); - mutex_unlock(&th_zone->therm_dev->lock); -} - -/* Register with the in-kernel thermal management */ -int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) -{ - int ret; - struct exynos_thermal_zone *th_zone; - - if (!sensor_conf || !sensor_conf->read_temperature) { - pr_err("Temperature sensor not initialised\n"); - return -EINVAL; - } - - th_zone = devm_kzalloc(sensor_conf->dev, - sizeof(struct exynos_thermal_zone), GFP_KERNEL); - if (!th_zone) - return -ENOMEM; - - th_zone->sensor_conf = sensor_conf; - /* - * TODO: 1) Handle multiple cooling devices in a thermal zone - * 2) Add a flag/name in cooling info to map to specific - * sensor - */ - if (sensor_conf->cooling_data.freq_clip_count > 0) { - th_zone->cool_dev[th_zone->cool_dev_size] = - cpufreq_cooling_register(cpu_present_mask); - if (IS_ERR(th_zone->cool_dev[th_zone->cool_dev_size])) { - ret = PTR_ERR(th_zone->cool_dev[th_zone->cool_dev_size]); - if (ret != -EPROBE_DEFER) - dev_err(sensor_conf->dev, - "Failed to register cpufreq cooling device: %d\n", - ret); - goto err_unregister; - } - th_zone->cool_dev_size++; - } - - th_zone->therm_dev = thermal_zone_device_register( - sensor_conf->name, sensor_conf->trip_data.trip_count, - 0, th_zone, &exynos_dev_ops, NULL, 0, - sensor_conf->trip_data.trigger_falling ? 0 : - IDLE_INTERVAL); - - if (IS_ERR(th_zone->therm_dev)) { - dev_err(sensor_conf->dev, - "Failed to register thermal zone device\n"); - ret = PTR_ERR(th_zone->therm_dev); - goto err_unregister; - } - th_zone->mode = THERMAL_DEVICE_ENABLED; - sensor_conf->pzone_data = th_zone; - - dev_info(sensor_conf->dev, - "Exynos: Thermal zone(%s) registered\n", sensor_conf->name); - - return 0; - -err_unregister: - exynos_unregister_thermal(sensor_conf); - return ret; -} - -/* Un-Register with the in-kernel thermal management */ -void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf) -{ - int i; - struct exynos_thermal_zone *th_zone; - - if (!sensor_conf || !sensor_conf->pzone_data) { - pr_err("Invalid temperature sensor configuration data\n"); - return; - } - - th_zone = sensor_conf->pzone_data; - - thermal_zone_device_unregister(th_zone->therm_dev); - - for (i = 0; i < th_zone->cool_dev_size; ++i) - cpufreq_cooling_unregister(th_zone->cool_dev[i]); - - dev_info(sensor_conf->dev, - "Exynos: Kernel Thermal management unregistered\n"); -} diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h deleted file mode 100644 index cd4471925cdd..000000000000 --- a/drivers/thermal/samsung/exynos_thermal_common.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * exynos_thermal_common.h - Samsung EXYNOS common header file - * - * Copyright (C) 2013 Samsung Electronics - * Amit Daniel Kachhap <amit.daniel@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef _EXYNOS_THERMAL_COMMON_H -#define _EXYNOS_THERMAL_COMMON_H - -/* In-kernel thermal framework related macros & definations */ -#define SENSOR_NAME_LEN 16 -#define MAX_TRIP_COUNT 8 -#define MAX_COOLING_DEVICE 4 - -#define ACTIVE_INTERVAL 500 -#define IDLE_INTERVAL 10000 -#define MCELSIUS 1000 - -/* CPU Zone information */ -#define PANIC_ZONE 4 -#define WARN_ZONE 3 -#define MONITOR_ZONE 2 -#define SAFE_ZONE 1 - -#define GET_ZONE(trip) (trip + 2) -#define GET_TRIP(zone) (zone - 2) - -enum trigger_type { - THROTTLE_ACTIVE = 1, - THROTTLE_PASSIVE, - SW_TRIP, - HW_TRIP, -}; - -/** - * struct freq_clip_table - * @freq_clip_max: maximum frequency allowed for this cooling state. - * @temp_level: Temperature level at which the temperature clipping will - * happen. - * @mask_val: cpumask of the allowed cpu's where the clipping will take place. - * - * This structure is required to be filled and passed to the - * cpufreq_cooling_unregister function. - */ -struct freq_clip_table { - unsigned int freq_clip_max; - unsigned int temp_level; - const struct cpumask *mask_val; -}; - -struct thermal_trip_point_conf { - int trip_val[MAX_TRIP_COUNT]; - int trip_type[MAX_TRIP_COUNT]; - int trip_count; - unsigned char trigger_falling; -}; - -struct thermal_cooling_conf { - struct freq_clip_table freq_data[MAX_TRIP_COUNT]; - int freq_clip_count; -}; - -struct thermal_sensor_conf { - char name[SENSOR_NAME_LEN]; - int (*read_temperature)(void *data); - int (*write_emul_temp)(void *drv_data, unsigned long temp); - struct thermal_trip_point_conf trip_data; - struct thermal_cooling_conf cooling_data; - void *driver_data; - void *pzone_data; - struct device *dev; -}; - -/*Functions used exynos based thermal sensor driver*/ -#ifdef CONFIG_EXYNOS_THERMAL_CORE -void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf); -int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf); -void exynos_report_trigger(struct thermal_sensor_conf *sensor_conf); -#else -static inline void -exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf) { return; } - -static inline int -exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) { return 0; } - -static inline void -exynos_report_trigger(struct thermal_sensor_conf *sensor_conf) { return; } - -#endif /* CONFIG_EXYNOS_THERMAL_CORE */ -#endif /* _EXYNOS_THERMAL_COMMON_H */ diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index d2f1e62a4232..fbeedc072cc2 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -1,6 +1,10 @@ /* * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit) * + * Copyright (C) 2014 Samsung Electronics + * Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> + * Lukasz Majewski <l.majewski@samsung.com> + * * Copyright (C) 2011 Samsung Electronics * Donggeun Kim <dg77.kim@samsung.com> * Amit Daniel Kachhap <amit.kachhap@linaro.org> @@ -31,8 +35,8 @@ #include <linux/platform_device.h> #include <linux/regulator/consumer.h> -#include "exynos_thermal_common.h" #include "exynos_tmu.h" +#include "../thermal_core.h" /* Exynos generic registers */ #define EXYNOS_TMU_REG_TRIMINFO 0x0 @@ -115,6 +119,27 @@ #define EXYNOS5440_TMU_TH_RISE4_SHIFT 24 #define EXYNOS5440_EFUSE_SWAP_OFFSET 8 +/* Exynos7 specific registers */ +#define EXYNOS7_THD_TEMP_RISE7_6 0x50 +#define EXYNOS7_THD_TEMP_FALL7_6 0x60 +#define EXYNOS7_TMU_REG_INTEN 0x110 +#define EXYNOS7_TMU_REG_INTPEND 0x118 +#define EXYNOS7_TMU_REG_EMUL_CON 0x160 + +#define EXYNOS7_TMU_TEMP_MASK 0x1ff +#define EXYNOS7_PD_DET_EN_SHIFT 23 +#define EXYNOS7_TMU_INTEN_RISE0_SHIFT 0 +#define EXYNOS7_TMU_INTEN_RISE1_SHIFT 1 +#define EXYNOS7_TMU_INTEN_RISE2_SHIFT 2 +#define EXYNOS7_TMU_INTEN_RISE3_SHIFT 3 +#define EXYNOS7_TMU_INTEN_RISE4_SHIFT 4 +#define EXYNOS7_TMU_INTEN_RISE5_SHIFT 5 +#define EXYNOS7_TMU_INTEN_RISE6_SHIFT 6 +#define EXYNOS7_TMU_INTEN_RISE7_SHIFT 7 +#define EXYNOS7_EMUL_DATA_SHIFT 7 +#define EXYNOS7_EMUL_DATA_MASK 0x1ff + +#define MCELSIUS 1000 /** * struct exynos_tmu_data : A structure to hold the private data of the TMU driver @@ -128,6 +153,7 @@ * @lock: lock to implement synchronization. * @clk: pointer to the clock structure. * @clk_sec: pointer to the clock structure for accessing the base_second. + * @sclk: pointer to the clock structure for accessing the tmu special clk. * @temp_error1: fused value of the first point trim. * @temp_error2: fused value of the second point trim. * @regulator: pointer to the TMU regulator structure. @@ -147,10 +173,11 @@ struct exynos_tmu_data { enum soc_type soc; struct work_struct irq_work; struct mutex lock; - struct clk *clk, *clk_sec; - u8 temp_error1, temp_error2; + struct clk *clk, *clk_sec, *sclk; + u16 temp_error1, temp_error2; struct regulator *regulator; - struct thermal_sensor_conf *reg_conf; + struct thermal_zone_device *tzd; + int (*tmu_initialize)(struct platform_device *pdev); void (*tmu_control)(struct platform_device *pdev, bool on); int (*tmu_read)(struct exynos_tmu_data *data); @@ -159,6 +186,33 @@ struct exynos_tmu_data { void (*tmu_clear_irqs)(struct exynos_tmu_data *data); }; +static void exynos_report_trigger(struct exynos_tmu_data *p) +{ + char data[10], *envp[] = { data, NULL }; + struct thermal_zone_device *tz = p->tzd; + unsigned long temp; + unsigned int i; + + if (!tz) { + pr_err("No thermal zone device defined\n"); + return; + } + + thermal_zone_device_update(tz); + + mutex_lock(&tz->lock); + /* Find the level for which trip happened */ + for (i = 0; i < of_thermal_get_ntrips(tz); i++) { + tz->ops->get_trip_temp(tz, i, &temp); + if (tz->last_temperature < temp) + break; + } + + snprintf(data, sizeof(data), "%u", i); + kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, envp); + mutex_unlock(&tz->lock); +} + /* * TMU treats temperature as a mapped temperature code. * The temperature is converted differently depending on the calibration type. @@ -190,7 +244,7 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp) * Calculate a temperature value from a temperature code. * The unit of the temperature is degree Celsius. */ -static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code) +static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code) { struct exynos_tmu_platform_data *pdata = data->pdata; int temp; @@ -234,14 +288,25 @@ static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info) static u32 get_th_reg(struct exynos_tmu_data *data, u32 threshold, bool falling) { - struct exynos_tmu_platform_data *pdata = data->pdata; + struct thermal_zone_device *tz = data->tzd; + const struct thermal_trip * const trips = + of_thermal_get_trip_points(tz); + unsigned long temp; int i; - for (i = 0; i < pdata->non_hw_trigger_levels; i++) { - u8 temp = pdata->trigger_levels[i]; + if (!trips) { + pr_err("%s: Cannot get trip points from of-thermal.c!\n", + __func__); + return 0; + } + + for (i = 0; i < of_thermal_get_ntrips(tz); i++) { + if (trips[i].type == THERMAL_TRIP_CRITICAL) + continue; + temp = trips[i].temperature / MCELSIUS; if (falling) - temp -= pdata->threshold_falling; + temp -= (trips[i].hysteresis / MCELSIUS); else threshold &= ~(0xff << 8 * i); @@ -305,9 +370,19 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) static int exynos4210_tmu_initialize(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); - struct exynos_tmu_platform_data *pdata = data->pdata; - unsigned int status; + struct thermal_zone_device *tz = data->tzd; + const struct thermal_trip * const trips = + of_thermal_get_trip_points(tz); int ret = 0, threshold_code, i; + unsigned long reference, temp; + unsigned int status; + + if (!trips) { + pr_err("%s: Cannot get trip points from of-thermal.c!\n", + __func__); + ret = -ENODEV; + goto out; + } status = readb(data->base + EXYNOS_TMU_REG_STATUS); if (!status) { @@ -318,12 +393,19 @@ static int exynos4210_tmu_initialize(struct platform_device *pdev) sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO)); /* Write temperature code for threshold */ - threshold_code = temp_to_code(data, pdata->threshold); + reference = trips[0].temperature / MCELSIUS; + threshold_code = temp_to_code(data, reference); + if (threshold_code < 0) { + ret = threshold_code; + goto out; + } writeb(threshold_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP); - for (i = 0; i < pdata->non_hw_trigger_levels; i++) - writeb(pdata->trigger_levels[i], data->base + + for (i = 0; i < of_thermal_get_ntrips(tz); i++) { + temp = trips[i].temperature / MCELSIUS; + writeb(temp - reference, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4); + } data->tmu_clear_irqs(data); out: @@ -333,9 +415,11 @@ out: static int exynos4412_tmu_initialize(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); - struct exynos_tmu_platform_data *pdata = data->pdata; + const struct thermal_trip * const trips = + of_thermal_get_trip_points(data->tzd); unsigned int status, trim_info, con, ctrl, rising_threshold; int ret = 0, threshold_code, i; + unsigned long crit_temp = 0; status = readb(data->base + EXYNOS_TMU_REG_STATUS); if (!status) { @@ -373,17 +457,29 @@ static int exynos4412_tmu_initialize(struct platform_device *pdev) data->tmu_clear_irqs(data); /* if last threshold limit is also present */ - i = pdata->max_trigger_level - 1; - if (pdata->trigger_levels[i] && pdata->trigger_type[i] == HW_TRIP) { - threshold_code = temp_to_code(data, pdata->trigger_levels[i]); - /* 1-4 level to be assigned in th0 reg */ - rising_threshold &= ~(0xff << 8 * i); - rising_threshold |= threshold_code << 8 * i; - writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE); - con = readl(data->base + EXYNOS_TMU_REG_CONTROL); - con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT); - writel(con, data->base + EXYNOS_TMU_REG_CONTROL); + for (i = 0; i < of_thermal_get_ntrips(data->tzd); i++) { + if (trips[i].type == THERMAL_TRIP_CRITICAL) { + crit_temp = trips[i].temperature; + break; + } } + + if (i == of_thermal_get_ntrips(data->tzd)) { + pr_err("%s: No CRITICAL trip point defined at of-thermal.c!\n", + __func__); + ret = -EINVAL; + goto out; + } + + threshold_code = temp_to_code(data, crit_temp / MCELSIUS); + /* 1-4 level to be assigned in th0 reg */ + rising_threshold &= ~(0xff << 8 * i); + rising_threshold |= threshold_code << 8 * i; + writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE); + con = readl(data->base + EXYNOS_TMU_REG_CONTROL); + con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT); + writel(con, data->base + EXYNOS_TMU_REG_CONTROL); + out: return ret; } @@ -391,9 +487,9 @@ out: static int exynos5440_tmu_initialize(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); - struct exynos_tmu_platform_data *pdata = data->pdata; unsigned int trim_info = 0, con, rising_threshold; - int ret = 0, threshold_code, i; + int ret = 0, threshold_code; + unsigned long crit_temp = 0; /* * For exynos5440 soc triminfo value is swapped between TMU0 and @@ -422,9 +518,8 @@ static int exynos5440_tmu_initialize(struct platform_device *pdev) data->tmu_clear_irqs(data); /* if last threshold limit is also present */ - i = pdata->max_trigger_level - 1; - if (pdata->trigger_levels[i] && pdata->trigger_type[i] == HW_TRIP) { - threshold_code = temp_to_code(data, pdata->trigger_levels[i]); + if (!data->tzd->ops->get_crit_temp(data->tzd, &crit_temp)) { + threshold_code = temp_to_code(data, crit_temp / MCELSIUS); /* 5th level to be assigned in th2 reg */ rising_threshold = threshold_code << EXYNOS5440_TMU_TH_RISE4_SHIFT; @@ -439,10 +534,88 @@ static int exynos5440_tmu_initialize(struct platform_device *pdev) return ret; } -static void exynos4210_tmu_control(struct platform_device *pdev, bool on) +static int exynos7_tmu_initialize(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); + struct thermal_zone_device *tz = data->tzd; struct exynos_tmu_platform_data *pdata = data->pdata; + unsigned int status, trim_info; + unsigned int rising_threshold = 0, falling_threshold = 0; + int ret = 0, threshold_code, i; + unsigned long temp, temp_hist; + unsigned int reg_off, bit_off; + + status = readb(data->base + EXYNOS_TMU_REG_STATUS); + if (!status) { + ret = -EBUSY; + goto out; + } + + trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); + + data->temp_error1 = trim_info & EXYNOS7_TMU_TEMP_MASK; + if (!data->temp_error1 || + (pdata->min_efuse_value > data->temp_error1) || + (data->temp_error1 > pdata->max_efuse_value)) + data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK; + + /* Write temperature code for rising and falling threshold */ + for (i = (of_thermal_get_ntrips(tz) - 1); i >= 0; i--) { + /* + * On exynos7 there are 4 rising and 4 falling threshold + * registers (0x50-0x5c and 0x60-0x6c respectively). Each + * register holds the value of two threshold levels (at bit + * offsets 0 and 16). Based on the fact that there are atmost + * eight possible trigger levels, calculate the register and + * bit offsets where the threshold levels are to be written. + * + * e.g. EXYNOS7_THD_TEMP_RISE7_6 (0x50) + * [24:16] - Threshold level 7 + * [8:0] - Threshold level 6 + * e.g. EXYNOS7_THD_TEMP_RISE5_4 (0x54) + * [24:16] - Threshold level 5 + * [8:0] - Threshold level 4 + * + * and similarly for falling thresholds. + * + * Based on the above, calculate the register and bit offsets + * for rising/falling threshold levels and populate them. + */ + reg_off = ((7 - i) / 2) * 4; + bit_off = ((8 - i) % 2); + + tz->ops->get_trip_temp(tz, i, &temp); + temp /= MCELSIUS; + + tz->ops->get_trip_hyst(tz, i, &temp_hist); + temp_hist = temp - (temp_hist / MCELSIUS); + + /* Set 9-bit temperature code for rising threshold levels */ + threshold_code = temp_to_code(data, temp); + rising_threshold = readl(data->base + + EXYNOS7_THD_TEMP_RISE7_6 + reg_off); + rising_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); + rising_threshold |= threshold_code << (16 * bit_off); + writel(rising_threshold, + data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off); + + /* Set 9-bit temperature code for falling threshold levels */ + threshold_code = temp_to_code(data, temp_hist); + falling_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); + falling_threshold |= threshold_code << (16 * bit_off); + writel(falling_threshold, + data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off); + } + + data->tmu_clear_irqs(data); +out: + return ret; +} + +static void exynos4210_tmu_control(struct platform_device *pdev, bool on) +{ + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + struct thermal_zone_device *tz = data->tzd; unsigned int con, interrupt_en; con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); @@ -450,10 +623,15 @@ static void exynos4210_tmu_control(struct platform_device *pdev, bool on) if (on) { con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); interrupt_en = - pdata->trigger_enable[3] << EXYNOS_TMU_INTEN_RISE3_SHIFT | - pdata->trigger_enable[2] << EXYNOS_TMU_INTEN_RISE2_SHIFT | - pdata->trigger_enable[1] << EXYNOS_TMU_INTEN_RISE1_SHIFT | - pdata->trigger_enable[0] << EXYNOS_TMU_INTEN_RISE0_SHIFT; + (of_thermal_is_trip_valid(tz, 3) + << EXYNOS_TMU_INTEN_RISE3_SHIFT) | + (of_thermal_is_trip_valid(tz, 2) + << EXYNOS_TMU_INTEN_RISE2_SHIFT) | + (of_thermal_is_trip_valid(tz, 1) + << EXYNOS_TMU_INTEN_RISE1_SHIFT) | + (of_thermal_is_trip_valid(tz, 0) + << EXYNOS_TMU_INTEN_RISE0_SHIFT); + if (data->soc != SOC_ARCH_EXYNOS4210) interrupt_en |= interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; @@ -468,7 +646,7 @@ static void exynos4210_tmu_control(struct platform_device *pdev, bool on) static void exynos5440_tmu_control(struct platform_device *pdev, bool on) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); - struct exynos_tmu_platform_data *pdata = data->pdata; + struct thermal_zone_device *tz = data->tzd; unsigned int con, interrupt_en; con = get_con_reg(data, readl(data->base + EXYNOS5440_TMU_S0_7_CTRL)); @@ -476,11 +654,16 @@ static void exynos5440_tmu_control(struct platform_device *pdev, bool on) if (on) { con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); interrupt_en = - pdata->trigger_enable[3] << EXYNOS5440_TMU_INTEN_RISE3_SHIFT | - pdata->trigger_enable[2] << EXYNOS5440_TMU_INTEN_RISE2_SHIFT | - pdata->trigger_enable[1] << EXYNOS5440_TMU_INTEN_RISE1_SHIFT | - pdata->trigger_enable[0] << EXYNOS5440_TMU_INTEN_RISE0_SHIFT; - interrupt_en |= interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT; + (of_thermal_is_trip_valid(tz, 3) + << EXYNOS5440_TMU_INTEN_RISE3_SHIFT) | + (of_thermal_is_trip_valid(tz, 2) + << EXYNOS5440_TMU_INTEN_RISE2_SHIFT) | + (of_thermal_is_trip_valid(tz, 1) + << EXYNOS5440_TMU_INTEN_RISE1_SHIFT) | + (of_thermal_is_trip_valid(tz, 0) + << EXYNOS5440_TMU_INTEN_RISE0_SHIFT); + interrupt_en |= + interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT; } else { con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); interrupt_en = 0; /* Disable all interrupts */ @@ -489,19 +672,62 @@ static void exynos5440_tmu_control(struct platform_device *pdev, bool on) writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL); } -static int exynos_tmu_read(struct exynos_tmu_data *data) +static void exynos7_tmu_control(struct platform_device *pdev, bool on) { - int ret; + struct exynos_tmu_data *data = platform_get_drvdata(pdev); + struct thermal_zone_device *tz = data->tzd; + unsigned int con, interrupt_en; + + con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); + + if (on) { + con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); + interrupt_en = + (of_thermal_is_trip_valid(tz, 7) + << EXYNOS7_TMU_INTEN_RISE7_SHIFT) | + (of_thermal_is_trip_valid(tz, 6) + << EXYNOS7_TMU_INTEN_RISE6_SHIFT) | + (of_thermal_is_trip_valid(tz, 5) + << EXYNOS7_TMU_INTEN_RISE5_SHIFT) | + (of_thermal_is_trip_valid(tz, 4) + << EXYNOS7_TMU_INTEN_RISE4_SHIFT) | + (of_thermal_is_trip_valid(tz, 3) + << EXYNOS7_TMU_INTEN_RISE3_SHIFT) | + (of_thermal_is_trip_valid(tz, 2) + << EXYNOS7_TMU_INTEN_RISE2_SHIFT) | + (of_thermal_is_trip_valid(tz, 1) + << EXYNOS7_TMU_INTEN_RISE1_SHIFT) | + (of_thermal_is_trip_valid(tz, 0) + << EXYNOS7_TMU_INTEN_RISE0_SHIFT); + + interrupt_en |= + interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; + } else { + con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); + interrupt_en = 0; /* Disable all interrupts */ + } + con |= 1 << EXYNOS7_PD_DET_EN_SHIFT; + + writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN); + writel(con, data->base + EXYNOS_TMU_REG_CONTROL); +} + +static int exynos_get_temp(void *p, long *temp) +{ + struct exynos_tmu_data *data = p; + + if (!data) + return -EINVAL; mutex_lock(&data->lock); clk_enable(data->clk); - ret = data->tmu_read(data); - if (ret >= 0) - ret = code_to_temp(data, ret); + + *temp = code_to_temp(data, data->tmu_read(data)) * MCELSIUS; + clk_disable(data->clk); mutex_unlock(&data->lock); - return ret; + return 0; } #ifdef CONFIG_THERMAL_EMULATION @@ -515,9 +741,19 @@ static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val, val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT); val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT); } - val &= ~(EXYNOS_EMUL_DATA_MASK << EXYNOS_EMUL_DATA_SHIFT); - val |= (temp_to_code(data, temp) << EXYNOS_EMUL_DATA_SHIFT) | - EXYNOS_EMUL_ENABLE; + if (data->soc == SOC_ARCH_EXYNOS7) { + val &= ~(EXYNOS7_EMUL_DATA_MASK << + EXYNOS7_EMUL_DATA_SHIFT); + val |= (temp_to_code(data, temp) << + EXYNOS7_EMUL_DATA_SHIFT) | + EXYNOS_EMUL_ENABLE; + } else { + val &= ~(EXYNOS_EMUL_DATA_MASK << + EXYNOS_EMUL_DATA_SHIFT); + val |= (temp_to_code(data, temp) << + EXYNOS_EMUL_DATA_SHIFT) | + EXYNOS_EMUL_ENABLE; + } } else { val &= ~EXYNOS_EMUL_ENABLE; } @@ -533,6 +769,8 @@ static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data, if (data->soc == SOC_ARCH_EXYNOS5260) emul_con = EXYNOS5260_EMUL_CON; + else if (data->soc == SOC_ARCH_EXYNOS7) + emul_con = EXYNOS7_TMU_REG_EMUL_CON; else emul_con = EXYNOS_EMUL_CON; @@ -576,7 +814,7 @@ out: #define exynos5440_tmu_set_emulation NULL static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp) { return -EINVAL; } -#endif/*CONFIG_THERMAL_EMULATION*/ +#endif /* CONFIG_THERMAL_EMULATION */ static int exynos4210_tmu_read(struct exynos_tmu_data *data) { @@ -596,6 +834,12 @@ static int exynos5440_tmu_read(struct exynos_tmu_data *data) return readb(data->base + EXYNOS5440_TMU_S0_7_TEMP); } +static int exynos7_tmu_read(struct exynos_tmu_data *data) +{ + return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) & + EXYNOS7_TMU_TEMP_MASK; +} + static void exynos_tmu_work(struct work_struct *work) { struct exynos_tmu_data *data = container_of(work, @@ -613,7 +857,7 @@ static void exynos_tmu_work(struct work_struct *work) if (!IS_ERR(data->clk_sec)) clk_disable(data->clk_sec); - exynos_report_trigger(data->reg_conf); + exynos_report_trigger(data); mutex_lock(&data->lock); clk_enable(data->clk); @@ -634,6 +878,9 @@ static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data) if (data->soc == SOC_ARCH_EXYNOS5260) { tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT; tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR; + } else if (data->soc == SOC_ARCH_EXYNOS7) { + tmu_intstat = EXYNOS7_TMU_REG_INTPEND; + tmu_intclear = EXYNOS7_TMU_REG_INTPEND; } else { tmu_intstat = EXYNOS_TMU_REG_INTSTAT; tmu_intclear = EXYNOS_TMU_REG_INTCLEAR; @@ -673,55 +920,94 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id) static const struct of_device_id exynos_tmu_match[] = { { .compatible = "samsung,exynos3250-tmu", - .data = &exynos3250_default_tmu_data, }, { .compatible = "samsung,exynos4210-tmu", - .data = &exynos4210_default_tmu_data, }, { .compatible = "samsung,exynos4412-tmu", - .data = &exynos4412_default_tmu_data, }, { .compatible = "samsung,exynos5250-tmu", - .data = &exynos5250_default_tmu_data, }, { .compatible = "samsung,exynos5260-tmu", - .data = &exynos5260_default_tmu_data, }, { .compatible = "samsung,exynos5420-tmu", - .data = &exynos5420_default_tmu_data, }, { .compatible = "samsung,exynos5420-tmu-ext-triminfo", - .data = &exynos5420_default_tmu_data, }, { .compatible = "samsung,exynos5440-tmu", - .data = &exynos5440_default_tmu_data, + }, + { + .compatible = "samsung,exynos7-tmu", }, {}, }; MODULE_DEVICE_TABLE(of, exynos_tmu_match); -static inline struct exynos_tmu_platform_data *exynos_get_driver_data( - struct platform_device *pdev, int id) +static int exynos_of_get_soc_type(struct device_node *np) +{ + if (of_device_is_compatible(np, "samsung,exynos3250-tmu")) + return SOC_ARCH_EXYNOS3250; + else if (of_device_is_compatible(np, "samsung,exynos4210-tmu")) + return SOC_ARCH_EXYNOS4210; + else if (of_device_is_compatible(np, "samsung,exynos4412-tmu")) + return SOC_ARCH_EXYNOS4412; + else if (of_device_is_compatible(np, "samsung,exynos5250-tmu")) + return SOC_ARCH_EXYNOS5250; + else if (of_device_is_compatible(np, "samsung,exynos5260-tmu")) + return SOC_ARCH_EXYNOS5260; + else if (of_device_is_compatible(np, "samsung,exynos5420-tmu")) + return SOC_ARCH_EXYNOS5420; + else if (of_device_is_compatible(np, + "samsung,exynos5420-tmu-ext-triminfo")) + return SOC_ARCH_EXYNOS5420_TRIMINFO; + else if (of_device_is_compatible(np, "samsung,exynos5440-tmu")) + return SOC_ARCH_EXYNOS5440; + else if (of_device_is_compatible(np, "samsung,exynos7-tmu")) + return SOC_ARCH_EXYNOS7; + + return -EINVAL; +} + +static int exynos_of_sensor_conf(struct device_node *np, + struct exynos_tmu_platform_data *pdata) { - struct exynos_tmu_init_data *data_table; - struct exynos_tmu_platform_data *tmu_data; - const struct of_device_id *match; + u32 value; + int ret; - match = of_match_node(exynos_tmu_match, pdev->dev.of_node); - if (!match) - return NULL; - data_table = (struct exynos_tmu_init_data *) match->data; - if (!data_table || id >= data_table->tmu_count) - return NULL; - tmu_data = data_table->tmu_data; - return (struct exynos_tmu_platform_data *) (tmu_data + id); + of_node_get(np); + + ret = of_property_read_u32(np, "samsung,tmu_gain", &value); + pdata->gain = (u8)value; + of_property_read_u32(np, "samsung,tmu_reference_voltage", &value); + pdata->reference_voltage = (u8)value; + of_property_read_u32(np, "samsung,tmu_noise_cancel_mode", &value); + pdata->noise_cancel_mode = (u8)value; + + of_property_read_u32(np, "samsung,tmu_efuse_value", + &pdata->efuse_value); + of_property_read_u32(np, "samsung,tmu_min_efuse_value", + &pdata->min_efuse_value); + of_property_read_u32(np, "samsung,tmu_max_efuse_value", + &pdata->max_efuse_value); + + of_property_read_u32(np, "samsung,tmu_first_point_trim", &value); + pdata->first_point_trim = (u8)value; + of_property_read_u32(np, "samsung,tmu_second_point_trim", &value); + pdata->second_point_trim = (u8)value; + of_property_read_u32(np, "samsung,tmu_default_temp_offset", &value); + pdata->default_temp_offset = (u8)value; + + of_property_read_u32(np, "samsung,tmu_cal_type", &pdata->cal_type); + of_property_read_u32(np, "samsung,tmu_cal_mode", &pdata->cal_mode); + + of_node_put(np); + return 0; } static int exynos_map_dt_data(struct platform_device *pdev) @@ -771,14 +1057,15 @@ static int exynos_map_dt_data(struct platform_device *pdev) return -EADDRNOTAVAIL; } - pdata = exynos_get_driver_data(pdev, data->id); - if (!pdata) { - dev_err(&pdev->dev, "No platform init data supplied.\n"); - return -ENODEV; - } + pdata = devm_kzalloc(&pdev->dev, + sizeof(struct exynos_tmu_platform_data), + GFP_KERNEL); + if (!pdata) + return -ENOMEM; + exynos_of_sensor_conf(pdev->dev.of_node, pdata); data->pdata = pdata; - data->soc = pdata->type; + data->soc = exynos_of_get_soc_type(pdev->dev.of_node); switch (data->soc) { case SOC_ARCH_EXYNOS4210: @@ -806,6 +1093,13 @@ static int exynos_map_dt_data(struct platform_device *pdev) data->tmu_set_emulation = exynos5440_tmu_set_emulation; data->tmu_clear_irqs = exynos5440_tmu_clear_irqs; break; + case SOC_ARCH_EXYNOS7: + data->tmu_initialize = exynos7_tmu_initialize; + data->tmu_control = exynos7_tmu_control; + data->tmu_read = exynos7_tmu_read; + data->tmu_set_emulation = exynos4412_tmu_set_emulation; + data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; + break; default: dev_err(&pdev->dev, "Platform not supported\n"); return -EINVAL; @@ -834,12 +1128,16 @@ static int exynos_map_dt_data(struct platform_device *pdev) return 0; } +static struct thermal_zone_of_device_ops exynos_sensor_ops = { + .get_temp = exynos_get_temp, + .set_emul_temp = exynos_tmu_set_emulation, +}; + static int exynos_tmu_probe(struct platform_device *pdev) { - struct exynos_tmu_data *data; struct exynos_tmu_platform_data *pdata; - struct thermal_sensor_conf *sensor_conf; - int ret, i; + struct exynos_tmu_data *data; + int ret; data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data), GFP_KERNEL); @@ -849,9 +1147,15 @@ static int exynos_tmu_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); mutex_init(&data->lock); + data->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0, data, + &exynos_sensor_ops); + if (IS_ERR(data->tzd)) { + pr_err("thermal: tz: %p ERROR\n", data->tzd); + return PTR_ERR(data->tzd); + } ret = exynos_map_dt_data(pdev); if (ret) - return ret; + goto err_sensor; pdata = data->pdata; @@ -860,20 +1164,22 @@ static int exynos_tmu_probe(struct platform_device *pdev) data->clk = devm_clk_get(&pdev->dev, "tmu_apbif"); if (IS_ERR(data->clk)) { dev_err(&pdev->dev, "Failed to get clock\n"); - return PTR_ERR(data->clk); + ret = PTR_ERR(data->clk); + goto err_sensor; } data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif"); if (IS_ERR(data->clk_sec)) { if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) { dev_err(&pdev->dev, "Failed to get triminfo clock\n"); - return PTR_ERR(data->clk_sec); + ret = PTR_ERR(data->clk_sec); + goto err_sensor; } } else { ret = clk_prepare(data->clk_sec); if (ret) { dev_err(&pdev->dev, "Failed to get clock\n"); - return ret; + goto err_sensor; } } @@ -883,82 +1189,57 @@ static int exynos_tmu_probe(struct platform_device *pdev) goto err_clk_sec; } - ret = exynos_tmu_initialize(pdev); - if (ret) { - dev_err(&pdev->dev, "Failed to initialize TMU\n"); - goto err_clk; + if (data->soc == SOC_ARCH_EXYNOS7) { + data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk"); + if (IS_ERR(data->sclk)) { + dev_err(&pdev->dev, "Failed to get sclk\n"); + goto err_clk; + } else { + ret = clk_prepare_enable(data->sclk); + if (ret) { + dev_err(&pdev->dev, "Failed to enable sclk\n"); + goto err_clk; + } + } } - exynos_tmu_control(pdev, true); - - /* Allocate a structure to register with the exynos core thermal */ - sensor_conf = devm_kzalloc(&pdev->dev, - sizeof(struct thermal_sensor_conf), GFP_KERNEL); - if (!sensor_conf) { - ret = -ENOMEM; - goto err_clk; - } - sprintf(sensor_conf->name, "therm_zone%d", data->id); - sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read; - sensor_conf->write_emul_temp = - (int (*)(void *, unsigned long))exynos_tmu_set_emulation; - sensor_conf->driver_data = data; - sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] + - pdata->trigger_enable[1] + pdata->trigger_enable[2]+ - pdata->trigger_enable[3]; - - for (i = 0; i < sensor_conf->trip_data.trip_count; i++) { - sensor_conf->trip_data.trip_val[i] = - pdata->threshold + pdata->trigger_levels[i]; - sensor_conf->trip_data.trip_type[i] = - pdata->trigger_type[i]; - } - - sensor_conf->trip_data.trigger_falling = pdata->threshold_falling; - - sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count; - for (i = 0; i < pdata->freq_tab_count; i++) { - sensor_conf->cooling_data.freq_data[i].freq_clip_max = - pdata->freq_tab[i].freq_clip_max; - sensor_conf->cooling_data.freq_data[i].temp_level = - pdata->freq_tab[i].temp_level; - } - sensor_conf->dev = &pdev->dev; - /* Register the sensor with thermal management interface */ - ret = exynos_register_thermal(sensor_conf); + ret = exynos_tmu_initialize(pdev); if (ret) { - if (ret != -EPROBE_DEFER) - dev_err(&pdev->dev, - "Failed to register thermal interface: %d\n", - ret); - goto err_clk; + dev_err(&pdev->dev, "Failed to initialize TMU\n"); + goto err_sclk; } - data->reg_conf = sensor_conf; ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq, IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); if (ret) { dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); - goto err_clk; + goto err_sclk; } + exynos_tmu_control(pdev, true); return 0; +err_sclk: + clk_disable_unprepare(data->sclk); err_clk: clk_unprepare(data->clk); err_clk_sec: if (!IS_ERR(data->clk_sec)) clk_unprepare(data->clk_sec); +err_sensor: + thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd); + return ret; } static int exynos_tmu_remove(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); + struct thermal_zone_device *tzd = data->tzd; - exynos_unregister_thermal(data->reg_conf); - + thermal_zone_of_sensor_unregister(&pdev->dev, tzd); exynos_tmu_control(pdev, false); + clk_disable_unprepare(data->sclk); clk_unprepare(data->clk); if (!IS_ERR(data->clk_sec)) clk_unprepare(data->clk_sec); diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index da3009bff6c4..4d71ec6c9aa0 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -23,16 +23,7 @@ #ifndef _EXYNOS_TMU_H #define _EXYNOS_TMU_H #include <linux/cpu_cooling.h> - -#include "exynos_thermal_common.h" - -enum calibration_type { - TYPE_ONE_POINT_TRIMMING, - TYPE_ONE_POINT_TRIMMING_25, - TYPE_ONE_POINT_TRIMMING_85, - TYPE_TWO_POINT_TRIMMING, - TYPE_NONE, -}; +#include <dt-bindings/thermal/thermal_exynos.h> enum soc_type { SOC_ARCH_EXYNOS3250 = 1, @@ -43,38 +34,11 @@ enum soc_type { SOC_ARCH_EXYNOS5420, SOC_ARCH_EXYNOS5420_TRIMINFO, SOC_ARCH_EXYNOS5440, + SOC_ARCH_EXYNOS7, }; /** * struct exynos_tmu_platform_data - * @threshold: basic temperature for generating interrupt - * 25 <= threshold <= 125 [unit: degree Celsius] - * @threshold_falling: differntial value for setting threshold - * of temperature falling interrupt. - * @trigger_levels: array for each interrupt levels - * [unit: degree Celsius] - * 0: temperature for trigger_level0 interrupt - * condition for trigger_level0 interrupt: - * current temperature > threshold + trigger_levels[0] - * 1: temperature for trigger_level1 interrupt - * condition for trigger_level1 interrupt: - * current temperature > threshold + trigger_levels[1] - * 2: temperature for trigger_level2 interrupt - * condition for trigger_level2 interrupt: - * current temperature > threshold + trigger_levels[2] - * 3: temperature for trigger_level3 interrupt - * condition for trigger_level3 interrupt: - * current temperature > threshold + trigger_levels[3] - * @trigger_type: defines the type of trigger. Possible values are, - * THROTTLE_ACTIVE trigger type - * THROTTLE_PASSIVE trigger type - * SW_TRIP trigger type - * HW_TRIP - * @trigger_enable[]: array to denote which trigger levels are enabled. - * 1 = enable trigger_level[] interrupt, - * 0 = disable trigger_level[] interrupt - * @max_trigger_level: max trigger level supported by the TMU - * @non_hw_trigger_levels: number of defined non-hardware trigger levels * @gain: gain of amplifier in the positive-TC generator block * 0 < gain <= 15 * @reference_voltage: reference voltage of amplifier @@ -86,24 +50,12 @@ enum soc_type { * @efuse_value: platform defined fuse value * @min_efuse_value: minimum valid trimming data * @max_efuse_value: maximum valid trimming data - * @first_point_trim: temp value of the first point trimming - * @second_point_trim: temp value of the second point trimming * @default_temp_offset: default temperature offset in case of no trimming * @cal_type: calibration type for temperature - * @freq_clip_table: Table representing frequency reduction percentage. - * @freq_tab_count: Count of the above table as frequency reduction may - * applicable to only some of the trigger levels. * * This structure is required for configuration of exynos_tmu driver. */ struct exynos_tmu_platform_data { - u8 threshold; - u8 threshold_falling; - u8 trigger_levels[MAX_TRIP_COUNT]; - enum trigger_type trigger_type[MAX_TRIP_COUNT]; - bool trigger_enable[MAX_TRIP_COUNT]; - u8 max_trigger_level; - u8 non_hw_trigger_levels; u8 gain; u8 reference_voltage; u8 noise_cancel_mode; @@ -115,30 +67,9 @@ struct exynos_tmu_platform_data { u8 second_point_trim; u8 default_temp_offset; - enum calibration_type cal_type; enum soc_type type; - struct freq_clip_table freq_tab[4]; - unsigned int freq_tab_count; -}; - -/** - * struct exynos_tmu_init_data - * @tmu_count: number of TMU instances. - * @tmu_data: platform data of all TMU instances. - * This structure is required to store data for multi-instance exynos tmu - * driver. - */ -struct exynos_tmu_init_data { - int tmu_count; - struct exynos_tmu_platform_data tmu_data[]; + u32 cal_type; + u32 cal_mode; }; -extern struct exynos_tmu_init_data const exynos3250_default_tmu_data; -extern struct exynos_tmu_init_data const exynos4210_default_tmu_data; -extern struct exynos_tmu_init_data const exynos4412_default_tmu_data; -extern struct exynos_tmu_init_data const exynos5250_default_tmu_data; -extern struct exynos_tmu_init_data const exynos5260_default_tmu_data; -extern struct exynos_tmu_init_data const exynos5420_default_tmu_data; -extern struct exynos_tmu_init_data const exynos5440_default_tmu_data; - #endif /* _EXYNOS_TMU_H */ diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c deleted file mode 100644 index b23910069f68..000000000000 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ /dev/null @@ -1,264 +0,0 @@ -/* - * exynos_tmu_data.c - Samsung EXYNOS tmu data file - * - * Copyright (C) 2013 Samsung Electronics - * Amit Daniel Kachhap <amit.daniel@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include "exynos_thermal_common.h" -#include "exynos_tmu.h" - -struct exynos_tmu_init_data const exynos4210_default_tmu_data = { - .tmu_data = { - { - .threshold = 80, - .trigger_levels[0] = 5, - .trigger_levels[1] = 20, - .trigger_levels[2] = 30, - .trigger_enable[0] = true, - .trigger_enable[1] = true, - .trigger_enable[2] = true, - .trigger_enable[3] = false, - .trigger_type[0] = THROTTLE_ACTIVE, - .trigger_type[1] = THROTTLE_ACTIVE, - .trigger_type[2] = SW_TRIP, - .max_trigger_level = 4, - .non_hw_trigger_levels = 3, - .gain = 15, - .reference_voltage = 7, - .cal_type = TYPE_ONE_POINT_TRIMMING, - .min_efuse_value = 40, - .max_efuse_value = 100, - .first_point_trim = 25, - .second_point_trim = 85, - .default_temp_offset = 50, - .freq_tab[0] = { - .freq_clip_max = 800 * 1000, - .temp_level = 85, - }, - .freq_tab[1] = { - .freq_clip_max = 200 * 1000, - .temp_level = 100, - }, - .freq_tab_count = 2, - .type = SOC_ARCH_EXYNOS4210, - }, - }, - .tmu_count = 1, -}; - -#define EXYNOS3250_TMU_DATA \ - .threshold_falling = 10, \ - .trigger_levels[0] = 70, \ - .trigger_levels[1] = 95, \ - .trigger_levels[2] = 110, \ - .trigger_levels[3] = 120, \ - .trigger_enable[0] = true, \ - .trigger_enable[1] = true, \ - .trigger_enable[2] = true, \ - .trigger_enable[3] = false, \ - .trigger_type[0] = THROTTLE_ACTIVE, \ - .trigger_type[1] = THROTTLE_ACTIVE, \ - .trigger_type[2] = SW_TRIP, \ - .trigger_type[3] = HW_TRIP, \ - .max_trigger_level = 4, \ - .non_hw_trigger_levels = 3, \ - .gain = 8, \ - .reference_voltage = 16, \ - .noise_cancel_mode = 4, \ - .cal_type = TYPE_TWO_POINT_TRIMMING, \ - .efuse_value = 55, \ - .min_efuse_value = 40, \ - .max_efuse_value = 100, \ - .first_point_trim = 25, \ - .second_point_trim = 85, \ - .default_temp_offset = 50, \ - .freq_tab[0] = { \ - .freq_clip_max = 800 * 1000, \ - .temp_level = 70, \ - }, \ - .freq_tab[1] = { \ - .freq_clip_max = 400 * 1000, \ - .temp_level = 95, \ - }, \ - .freq_tab_count = 2 - -struct exynos_tmu_init_data const exynos3250_default_tmu_data = { - .tmu_data = { - { - EXYNOS3250_TMU_DATA, - .type = SOC_ARCH_EXYNOS3250, - }, - }, - .tmu_count = 1, -}; - -#define EXYNOS4412_TMU_DATA \ - .threshold_falling = 10, \ - .trigger_levels[0] = 70, \ - .trigger_levels[1] = 95, \ - .trigger_levels[2] = 110, \ - .trigger_levels[3] = 120, \ - .trigger_enable[0] = true, \ - .trigger_enable[1] = true, \ - .trigger_enable[2] = true, \ - .trigger_enable[3] = false, \ - .trigger_type[0] = THROTTLE_ACTIVE, \ - .trigger_type[1] = THROTTLE_ACTIVE, \ - .trigger_type[2] = SW_TRIP, \ - .trigger_type[3] = HW_TRIP, \ - .max_trigger_level = 4, \ - .non_hw_trigger_levels = 3, \ - .gain = 8, \ - .reference_voltage = 16, \ - .noise_cancel_mode = 4, \ - .cal_type = TYPE_ONE_POINT_TRIMMING, \ - .efuse_value = 55, \ - .min_efuse_value = 40, \ - .max_efuse_value = 100, \ - .first_point_trim = 25, \ - .second_point_trim = 85, \ - .default_temp_offset = 50, \ - .freq_tab[0] = { \ - .freq_clip_max = 1400 * 1000, \ - .temp_level = 70, \ - }, \ - .freq_tab[1] = { \ - .freq_clip_max = 400 * 1000, \ - .temp_level = 95, \ - }, \ - .freq_tab_count = 2 - -struct exynos_tmu_init_data const exynos4412_default_tmu_data = { - .tmu_data = { - { - EXYNOS4412_TMU_DATA, - .type = SOC_ARCH_EXYNOS4412, - }, - }, - .tmu_count = 1, -}; - -struct exynos_tmu_init_data const exynos5250_default_tmu_data = { - .tmu_data = { - { - EXYNOS4412_TMU_DATA, - .type = SOC_ARCH_EXYNOS5250, - }, - }, - .tmu_count = 1, -}; - -#define __EXYNOS5260_TMU_DATA \ - .threshold_falling = 10, \ - .trigger_levels[0] = 85, \ - .trigger_levels[1] = 103, \ - .trigger_levels[2] = 110, \ - .trigger_levels[3] = 120, \ - .trigger_enable[0] = true, \ - .trigger_enable[1] = true, \ - .trigger_enable[2] = true, \ - .trigger_enable[3] = false, \ - .trigger_type[0] = THROTTLE_ACTIVE, \ - .trigger_type[1] = THROTTLE_ACTIVE, \ - .trigger_type[2] = SW_TRIP, \ - .trigger_type[3] = HW_TRIP, \ - .max_trigger_level = 4, \ - .non_hw_trigger_levels = 3, \ - .gain = 8, \ - .reference_voltage = 16, \ - .noise_cancel_mode = 4, \ - .cal_type = TYPE_ONE_POINT_TRIMMING, \ - .efuse_value = 55, \ - .min_efuse_value = 40, \ - .max_efuse_value = 100, \ - .first_point_trim = 25, \ - .second_point_trim = 85, \ - .default_temp_offset = 50, \ - .freq_tab[0] = { \ - .freq_clip_max = 800 * 1000, \ - .temp_level = 85, \ - }, \ - .freq_tab[1] = { \ - .freq_clip_max = 200 * 1000, \ - .temp_level = 103, \ - }, \ - .freq_tab_count = 2, \ - -#define EXYNOS5260_TMU_DATA \ - __EXYNOS5260_TMU_DATA \ - .type = SOC_ARCH_EXYNOS5260 - -struct exynos_tmu_init_data const exynos5260_default_tmu_data = { - .tmu_data = { - { EXYNOS5260_TMU_DATA }, - { EXYNOS5260_TMU_DATA }, - { EXYNOS5260_TMU_DATA }, - { EXYNOS5260_TMU_DATA }, - { EXYNOS5260_TMU_DATA }, - }, - .tmu_count = 5, -}; - -#define EXYNOS5420_TMU_DATA \ - __EXYNOS5260_TMU_DATA \ - .type = SOC_ARCH_EXYNOS5420 - -#define EXYNOS5420_TMU_DATA_SHARED \ - __EXYNOS5260_TMU_DATA \ - .type = SOC_ARCH_EXYNOS5420_TRIMINFO - -struct exynos_tmu_init_data const exynos5420_default_tmu_data = { - .tmu_data = { - { EXYNOS5420_TMU_DATA }, - { EXYNOS5420_TMU_DATA }, - { EXYNOS5420_TMU_DATA_SHARED }, - { EXYNOS5420_TMU_DATA_SHARED }, - { EXYNOS5420_TMU_DATA_SHARED }, - }, - .tmu_count = 5, -}; - -#define EXYNOS5440_TMU_DATA \ - .trigger_levels[0] = 100, \ - .trigger_levels[4] = 105, \ - .trigger_enable[0] = 1, \ - .trigger_type[0] = SW_TRIP, \ - .trigger_type[4] = HW_TRIP, \ - .max_trigger_level = 5, \ - .non_hw_trigger_levels = 1, \ - .gain = 5, \ - .reference_voltage = 16, \ - .noise_cancel_mode = 4, \ - .cal_type = TYPE_ONE_POINT_TRIMMING, \ - .efuse_value = 0x5b2d, \ - .min_efuse_value = 16, \ - .max_efuse_value = 76, \ - .first_point_trim = 25, \ - .second_point_trim = 70, \ - .default_temp_offset = 25, \ - .type = SOC_ARCH_EXYNOS5440 - -struct exynos_tmu_init_data const exynos5440_default_tmu_data = { - .tmu_data = { - { EXYNOS5440_TMU_DATA } , - { EXYNOS5440_TMU_DATA } , - { EXYNOS5440_TMU_DATA } , - }, - .tmu_count = 3, -}; diff --git a/include/dt-bindings/thermal/thermal_exynos.h b/include/dt-bindings/thermal/thermal_exynos.h new file mode 100644 index 000000000000..0646500bca69 --- /dev/null +++ b/include/dt-bindings/thermal/thermal_exynos.h @@ -0,0 +1,28 @@ +/* + * thermal_exynos.h - Samsung EXYNOS TMU device tree definitions + * + * Copyright (C) 2014 Samsung Electronics + * Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _EXYNOS_THERMAL_TMU_DT_H +#define _EXYNOS_THERMAL_TMU_DT_H + +#define TYPE_ONE_POINT_TRIMMING 0 +#define TYPE_ONE_POINT_TRIMMING_25 1 +#define TYPE_ONE_POINT_TRIMMING_85 2 +#define TYPE_TWO_POINT_TRIMMING 3 +#define TYPE_NONE 4 + +#endif /* _EXYNOS_THERMAL_TMU_DT_H */ |