summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--net/mac80211/ieee80211_i.h20
-rw-r--r--net/mac80211/mlme.c257
-rw-r--r--net/mac80211/rx.c22
3 files changed, 227 insertions, 72 deletions
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 06b3411530f2..a34bca2dc52f 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -256,12 +256,13 @@ struct ieee80211_mgd_work {
/* flags used in struct ieee80211_if_managed.flags */
enum ieee80211_sta_flags {
- IEEE80211_STA_PROBEREQ_POLL = BIT(3),
- IEEE80211_STA_CONTROL_PORT = BIT(4),
- IEEE80211_STA_WMM_ENABLED = BIT(5),
- IEEE80211_STA_DISABLE_11N = BIT(6),
- IEEE80211_STA_CSA_RECEIVED = BIT(7),
- IEEE80211_STA_MFP_ENABLED = BIT(8),
+ IEEE80211_STA_BEACON_POLL = BIT(0),
+ IEEE80211_STA_CONNECTION_POLL = BIT(1),
+ IEEE80211_STA_CONTROL_PORT = BIT(2),
+ IEEE80211_STA_WMM_ENABLED = BIT(3),
+ IEEE80211_STA_DISABLE_11N = BIT(4),
+ IEEE80211_STA_CSA_RECEIVED = BIT(5),
+ IEEE80211_STA_MFP_ENABLED = BIT(6),
};
/* flags for MLME request */
@@ -271,11 +272,16 @@ enum ieee80211_sta_request {
struct ieee80211_if_managed {
struct timer_list timer;
+ struct timer_list conn_mon_timer;
+ struct timer_list bcn_mon_timer;
struct timer_list chswitch_timer;
struct work_struct work;
+ struct work_struct monitor_work;
struct work_struct chswitch_work;
struct work_struct beacon_loss_work;
+ unsigned long probe_timeout;
+
struct mutex mtx;
struct ieee80211_bss *associated;
struct list_head work_list;
@@ -292,8 +298,6 @@ struct ieee80211_if_managed {
unsigned long request;
- unsigned long last_beacon;
-
unsigned int flags;
u32 beacon_crc;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index c1114bb8095b..18dad229344c 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -31,8 +31,23 @@
#define IEEE80211_AUTH_MAX_TRIES 3
#define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
#define IEEE80211_ASSOC_MAX_TRIES 3
-#define IEEE80211_MONITORING_INTERVAL (2 * HZ)
-#define IEEE80211_PROBE_WAIT (HZ / 5)
+
+/*
+ * beacon loss detection timeout
+ * XXX: should depend on beacon interval
+ */
+#define IEEE80211_BEACON_LOSS_TIME (2 * HZ)
+/*
+ * Time the connection can be idle before we probe
+ * it to see if we can still talk to the AP.
+ */
+#define IEEE80211_CONNECTION_IDLE_TIME (2 * HZ)
+/*
+ * Time we wait for a probe response after sending
+ * a probe request because of beacon loss or for
+ * checking the connection still works.
+ */
+#define IEEE80211_PROBE_WAIT (HZ / 5)
#define TMR_RUNNING_TIMER 0
#define TMR_RUNNING_CHANSW 1
@@ -92,6 +107,15 @@ static void run_again(struct ieee80211_if_managed *ifmgd,
mod_timer(&ifmgd->timer, timeout);
}
+static void mod_beacon_timer(struct ieee80211_sub_if_data *sdata)
+{
+ if (sdata->local->hw.flags & IEEE80211_HW_BEACON_FILTER)
+ return;
+
+ mod_timer(&sdata->u.mgd.bcn_mon_timer,
+ round_jiffies_up(jiffies + IEEE80211_BEACON_LOSS_TIME));
+}
+
static int ecw2cw(int ecw)
{
return (1 << ecw) - 1;
@@ -666,7 +690,8 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
if (count == 1 && found->u.mgd.powersave &&
found->u.mgd.associated && list_empty(&found->u.mgd.work_list) &&
- !(found->u.mgd.flags & IEEE80211_STA_PROBEREQ_POLL)) {
+ !(found->u.mgd.flags & (IEEE80211_STA_BEACON_POLL |
+ IEEE80211_STA_CONNECTION_POLL))) {
s32 beaconint_us;
if (latency < 0)
@@ -872,6 +897,10 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
sdata->u.mgd.associated = bss;
memcpy(sdata->u.mgd.bssid, bss->cbss.bssid, ETH_ALEN);
+ /* just to be sure */
+ sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
+ IEEE80211_STA_BEACON_POLL);
+
ieee80211_led_assoc(local, 1);
sdata->vif.bss_conf.assoc = 1;
@@ -983,16 +1012,21 @@ ieee80211_authenticate(struct ieee80211_sub_if_data *sdata,
return RX_MGMT_NONE;
}
-static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
- const u8 *bssid, bool deauth)
+static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
u32 changed = 0, config_changed = 0;
+ u8 bssid[ETH_ALEN];
ASSERT_MGD_MTX(ifmgd);
+ if (WARN_ON(!ifmgd->associated))
+ return;
+
+ memcpy(bssid, ifmgd->associated->cbss.bssid, ETH_ALEN);
+
ifmgd->associated = NULL;
memset(ifmgd->bssid, 0, ETH_ALEN);
@@ -1112,32 +1146,22 @@ void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
* from AP because we know that the connection is working both ways
* at that time. But multicast frames (and hence also beacons) must
* be ignored here, because we need to trigger the timer during
- * data idle periods for sending the periodical probe request to
- * the AP.
+ * data idle periods for sending the periodic probe request to the
+ * AP we're connected to.
*/
- if (!is_multicast_ether_addr(hdr->addr1))
- mod_timer(&sdata->u.mgd.timer,
- jiffies + IEEE80211_MONITORING_INTERVAL);
+ if (is_multicast_ether_addr(hdr->addr1))
+ return;
+
+ mod_timer(&sdata->u.mgd.conn_mon_timer,
+ round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
}
-void ieee80211_beacon_loss_work(struct work_struct *work)
+static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
+ bool beacon)
{
- struct ieee80211_sub_if_data *sdata =
- container_of(work, struct ieee80211_sub_if_data,
- u.mgd.beacon_loss_work);
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
const u8 *ssid;
-
- /*
- * The driver has already reported this event and we have
- * already sent a probe request. Maybe the AP died and the
- * driver keeps reporting until we disassociate... We have
- * to ignore that because otherwise we would continually
- * reset the timer and never check whether we received a
- * probe response!
- */
- if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL)
- return;
+ bool already = false;
mutex_lock(&ifmgd->mtx);
@@ -1145,12 +1169,35 @@ void ieee80211_beacon_loss_work(struct work_struct *work)
goto out;
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- if (net_ratelimit())
- printk(KERN_DEBUG "%s: driver reports beacon loss from AP "
+ if (beacon && net_ratelimit())
+ printk(KERN_DEBUG "%s: detected beacon loss from AP "
"- sending probe request\n", sdata->dev->name);
#endif
- ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
+ /*
+ * The driver/our work has already reported this event or the
+ * connection monitoring has kicked in and we have already sent
+ * a probe request. Or maybe the AP died and the driver keeps
+ * reporting until we disassociate...
+ *
+ * In either case we have to ignore the current call to this
+ * function (except for setting the correct probe reason bit)
+ * because otherwise we would reset the timer every time and
+ * never check whether we received a probe response!
+ */
+ if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
+ IEEE80211_STA_CONNECTION_POLL))
+ already = true;
+
+ if (beacon)
+ ifmgd->flags |= IEEE80211_STA_BEACON_POLL;
+ else
+ ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
+
+ if (already)
+ goto out;
+
+ ifmgd->probe_timeout = jiffies + IEEE80211_PROBE_WAIT;
mutex_lock(&sdata->local->iflist_mtx);
ieee80211_recalc_ps(sdata->local, -1);
@@ -1160,11 +1207,21 @@ void ieee80211_beacon_loss_work(struct work_struct *work)
ieee80211_send_probe_req(sdata, ifmgd->associated->cbss.bssid,
ssid + 2, ssid[1], NULL, 0);
- run_again(ifmgd, jiffies + IEEE80211_PROBE_WAIT);
+ run_again(ifmgd, ifmgd->probe_timeout);
+
out:
mutex_unlock(&ifmgd->mtx);
}
+void ieee80211_beacon_loss_work(struct work_struct *work)
+{
+ struct ieee80211_sub_if_data *sdata =
+ container_of(work, struct ieee80211_sub_if_data,
+ u.mgd.beacon_loss_work);
+
+ ieee80211_mgd_probe_ap(sdata, true);
+}
+
void ieee80211_beacon_loss(struct ieee80211_vif *vif)
{
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
@@ -1278,7 +1335,7 @@ ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
sdata->dev->name, bssid, reason_code);
if (!wk) {
- ieee80211_set_disassoc(sdata, bssid, true);
+ ieee80211_set_disassoc(sdata);
} else {
list_del(&wk->list);
kfree(wk);
@@ -1311,7 +1368,7 @@ ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
printk(KERN_DEBUG "%s: disassociated (Reason: %u)\n",
sdata->dev->name, reason_code);
- ieee80211_set_disassoc(sdata, ifmgd->associated->cbss.bssid, false);
+ ieee80211_set_disassoc(sdata);
return RX_MGMT_CFG80211_DISASSOC;
}
@@ -1412,9 +1469,6 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
return RX_MGMT_NONE;
}
- /* update new sta with its last rx activity */
- sta->last_rx = jiffies;
-
set_sta_flags(sta, WLAN_STA_AUTH | WLAN_STA_ASSOC |
WLAN_STA_ASSOC_AP);
if (!(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
@@ -1517,10 +1571,11 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
ieee80211_set_associated(sdata, wk->bss, changed);
/*
- * initialise the time of last beacon to be the association time,
- * otherwise beacon loss check will trigger immediately
+ * Start timer to probe the connection to the AP now.
+ * Also start the timer that will detect beacon loss.
*/
- ifmgd->last_beacon = jiffies;
+ ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
+ mod_beacon_timer(sdata);
list_del(&wk->list);
kfree(wk);
@@ -1604,11 +1659,22 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
if (ifmgd->associated &&
memcmp(mgmt->bssid, ifmgd->associated->cbss.bssid, ETH_ALEN) == 0 &&
- ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) {
- ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL;
+ ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
+ IEEE80211_STA_CONNECTION_POLL)) {
+ ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
+ IEEE80211_STA_BEACON_POLL);
mutex_lock(&sdata->local->iflist_mtx);
ieee80211_recalc_ps(sdata->local, -1);
mutex_unlock(&sdata->local->iflist_mtx);
+ /*
+ * We've received a probe response, but are not sure whether
+ * we have or will be receiving any beacons or data, so let's
+ * schedule the timers again, just in case.
+ */
+ mod_beacon_timer(sdata);
+ mod_timer(&ifmgd->conn_mon_timer,
+ round_jiffies_up(jiffies +
+ IEEE80211_CONNECTION_IDLE_TIME));
}
}
@@ -1658,27 +1724,41 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
if (rx_status->freq != local->hw.conf.channel->center_freq)
return;
- if (WARN_ON(!ifmgd->associated))
+ /*
+ * We might have received a number of frames, among them a
+ * disassoc frame and a beacon...
+ */
+ if (!ifmgd->associated)
return;
bssid = ifmgd->associated->cbss.bssid;
- if (WARN_ON(memcmp(bssid, mgmt->bssid, ETH_ALEN) != 0))
+ /*
+ * And in theory even frames from a different AP we were just
+ * associated to a split-second ago!
+ */
+ if (memcmp(bssid, mgmt->bssid, ETH_ALEN) != 0)
return;
- if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) {
+ if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) {
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: cancelling probereq poll due "
"to a received beacon\n", sdata->dev->name);
}
#endif
- ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL;
+ ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL;
mutex_lock(&local->iflist_mtx);
ieee80211_recalc_ps(local, -1);
mutex_unlock(&local->iflist_mtx);
}
+ /*
+ * Push the beacon loss detection into the future since
+ * we are processing a beacon from the AP just now.
+ */
+ mod_beacon_timer(sdata);
+
ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
len - baselen, &elems,
@@ -1980,6 +2060,37 @@ static void ieee80211_sta_work(struct work_struct *work)
/* then process the rest of the work */
mutex_lock(&ifmgd->mtx);
+ if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
+ IEEE80211_STA_CONNECTION_POLL) &&
+ ifmgd->associated) {
+ if (time_is_after_jiffies(ifmgd->probe_timeout))
+ run_again(ifmgd, ifmgd->probe_timeout);
+ else {
+ u8 bssid[ETH_ALEN];
+ /*
+ * We actually lost the connection ... or did we?
+ * Let's make sure!
+ */
+ ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
+ IEEE80211_STA_BEACON_POLL);
+ memcpy(bssid, ifmgd->associated->cbss.bssid, ETH_ALEN);
+ printk(KERN_DEBUG "No probe response from AP %pM"
+ " after %dms, disconnecting.\n",
+ bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ);
+ ieee80211_set_disassoc(sdata);
+ mutex_unlock(&ifmgd->mtx);
+ /*
+ * must be outside lock due to cfg80211,
+ * but that's not a problem.
+ */
+ ieee80211_send_deauth_disassoc(sdata, bssid,
+ IEEE80211_STYPE_DEAUTH,
+ WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
+ NULL);
+ mutex_lock(&ifmgd->mtx);
+ }
+ }
+
list_for_each_entry(wk, &ifmgd->work_list, list) {
if (wk->state != IEEE80211_MGD_STATE_IDLE) {
anybusy = true;
@@ -2067,15 +2178,51 @@ static void ieee80211_sta_work(struct work_struct *work)
ieee80211_recalc_idle(local);
}
+static void ieee80211_sta_bcn_mon_timer(unsigned long data)
+{
+ struct ieee80211_sub_if_data *sdata =
+ (struct ieee80211_sub_if_data *) data;
+ struct ieee80211_local *local = sdata->local;
+
+ if (local->quiescing)
+ return;
+
+ queue_work(sdata->local->hw.workqueue,
+ &sdata->u.mgd.beacon_loss_work);
+}
+
+static void ieee80211_sta_conn_mon_timer(unsigned long data)
+{
+ struct ieee80211_sub_if_data *sdata =
+ (struct ieee80211_sub_if_data *) data;
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ struct ieee80211_local *local = sdata->local;
+
+ if (local->quiescing)
+ return;
+
+ queue_work(local->hw.workqueue, &ifmgd->monitor_work);
+}
+
+static void ieee80211_sta_monitor_work(struct work_struct *work)
+{
+ struct ieee80211_sub_if_data *sdata =
+ container_of(work, struct ieee80211_sub_if_data,
+ u.mgd.monitor_work);
+
+ ieee80211_mgd_probe_ap(sdata, false);
+}
+
static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
{
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- /*
- * Need to update last_beacon to avoid beacon loss
- * test to trigger.
- */
- sdata->u.mgd.last_beacon = jiffies;
+ sdata->u.mgd.flags &= ~(IEEE80211_STA_BEACON_POLL |
+ IEEE80211_STA_CONNECTION_POLL);
+ /* let's probe the connection once */
+ queue_work(sdata->local->hw.workqueue,
+ &sdata->u.mgd.monitor_work);
+ /* and do all the other regular work too */
queue_work(sdata->local->hw.workqueue,
&sdata->u.mgd.work);
}
@@ -2100,6 +2247,11 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
cancel_work_sync(&ifmgd->chswitch_work);
if (del_timer_sync(&ifmgd->chswitch_timer))
set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
+
+ cancel_work_sync(&ifmgd->monitor_work);
+ /* these will just be re-established on connection */
+ del_timer_sync(&ifmgd->conn_mon_timer);
+ del_timer_sync(&ifmgd->bcn_mon_timer);
}
void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
@@ -2120,10 +2272,15 @@ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
ifmgd = &sdata->u.mgd;
INIT_WORK(&ifmgd->work, ieee80211_sta_work);
+ INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
INIT_WORK(&ifmgd->beacon_loss_work, ieee80211_beacon_loss_work);
setup_timer(&ifmgd->timer, ieee80211_sta_timer,
(unsigned long) sdata);
+ setup_timer(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer,
+ (unsigned long) sdata);
+ setup_timer(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer,
+ (unsigned long) sdata);
setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer,
(unsigned long) sdata);
skb_queue_head_init(&ifmgd->skb_queue);
@@ -2323,7 +2480,7 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
if (ifmgd->associated && &ifmgd->associated->cbss == req->bss) {
bssid = req->bss->bssid;
- ieee80211_set_disassoc(sdata, bssid, true);
+ ieee80211_set_disassoc(sdata);
} else list_for_each_entry(wk, &ifmgd->work_list, list) {
if (&wk->bss->cbss == req->bss) {
bssid = req->bss->bssid;
@@ -2365,7 +2522,7 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
return -ENOLINK;
}
- ieee80211_set_disassoc(sdata, req->bss->bssid, false);
+ ieee80211_set_disassoc(sdata);
mutex_unlock(&ifmgd->mtx);
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index fe6b99059531..b513fb791153 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -833,28 +833,22 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx)
if (!sta)
return RX_CONTINUE;
- /* Update last_rx only for IBSS packets which are for the current
- * BSSID to avoid keeping the current IBSS network alive in cases where
- * other STAs are using different BSSID. */
+ /*
+ * Update last_rx only for IBSS packets which are for the current
+ * BSSID to avoid keeping the current IBSS network alive in cases
+ * where other STAs start using different BSSID.
+ */
if (rx->sdata->vif.type == NL80211_IFTYPE_ADHOC) {
u8 *bssid = ieee80211_get_bssid(hdr, rx->skb->len,
NL80211_IFTYPE_ADHOC);
if (compare_ether_addr(bssid, rx->sdata->u.ibss.bssid) == 0)
sta->last_rx = jiffies;
- } else
- if (!is_multicast_ether_addr(hdr->addr1) ||
- rx->sdata->vif.type == NL80211_IFTYPE_STATION) {
- /* Update last_rx only for unicast frames in order to prevent
- * the Probe Request frames (the only broadcast frames from a
- * STA in infrastructure mode) from keeping a connection alive.
+ } else if (!is_multicast_ether_addr(hdr->addr1)) {
+ /*
* Mesh beacons will update last_rx when if they are found to
* match the current local configuration when processed.
*/
- if (rx->sdata->vif.type == NL80211_IFTYPE_STATION &&
- ieee80211_is_beacon(hdr->frame_control)) {
- rx->sdata->u.mgd.last_beacon = jiffies;
- } else
- sta->last_rx = jiffies;
+ sta->last_rx = jiffies;
}
if (!(rx->flags & IEEE80211_RX_RA_MATCH))