diff options
-rw-r--r-- | Documentation/devicetree/bindings/usb/atmel-usb.txt | 6 | ||||
-rw-r--r-- | arch/arm/boot/dts/armada-xp.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/at91sam9g45.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/at91sam9x5.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/sama5d3.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/sama5d4.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/configs/multi_v7_defconfig | 1 | ||||
-rw-r--r-- | arch/arm/mach-bcm/Kconfig | 1 | ||||
-rw-r--r-- | arch/arm/mach-dove/include/mach/irqs.h | 118 | ||||
-rw-r--r-- | arch/arm/mach-dove/irq.c | 8 | ||||
-rw-r--r-- | arch/arm/mach-mvebu/pm-board.c | 3 | ||||
-rw-r--r-- | arch/arm64/boot/dts/apm/apm-storm.dtsi | 13 | ||||
-rw-r--r-- | drivers/mmc/host/omap_hsmmc.c | 49 | ||||
-rw-r--r-- | drivers/soc/qcom/spm.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 58 | ||||
-rw-r--r-- | drivers/tty/serial/omap-serial.c | 35 |
16 files changed, 103 insertions, 201 deletions
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index 1be8d7a26c15..5883b73ea1b5 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -79,9 +79,9 @@ Atmel High-Speed USB device controller Required properties: - compatible: Should be one of the following - "at91sam9rl-udc" - "at91sam9g45-udc" - "sama5d3-udc" + "atmel,at91sam9rl-udc" + "atmel,at91sam9g45-udc" + "atmel,sama5d3-udc" - reg: Address and length of the register set for the device - interrupts: Should contain usba interrupt - clocks: Should reference the peripheral and host clocks diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 0854d4493da7..3de9b761cc1a 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -305,7 +305,7 @@ spi0_pins: spi0-pins { marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39"; - marvell,function = "spi"; + marvell,function = "spi0"; }; uart2_pins: uart2-pins { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index d260ba779ae5..18177f5a7464 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -1148,7 +1148,7 @@ usb2: gadget@fff78000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9rl-udc"; + compatible = "atmel,at91sam9g45-udc"; reg = <0x00600000 0x80000 0xfff78000 0x400>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 7521bdf17ef2..b6c8df8d380e 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1108,7 +1108,7 @@ usb2: gadget@f803c000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9rl-udc"; + compatible = "atmel,at91sam9g45-udc"; reg = <0x00500000 0x80000 0xf803c000 0x400>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 5ab7548e04e1..9e2444b07bce 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1321,7 +1321,7 @@ usb0: gadget@00500000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9rl-udc"; + compatible = "atmel,sama5d3-udc"; reg = <0x00500000 0x100000 0xf8030000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 653a1f851f2b..3ee22ee13c5a 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -127,7 +127,7 @@ usb0: gadget@00400000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9rl-udc"; + compatible = "atmel,sama5d3-udc"; reg = <0x00400000 0x100000 0xfc02c000 0x4000>; interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>; diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index fd6a6d23bc20..6d83a1bf0c74 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -169,6 +169,7 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_BRCMNAND=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index e9184feffc4e..0ac9e4b3b265 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -19,7 +19,6 @@ config ARCH_BCM_IPROC select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select PINCTRL - select MTD_NAND_BRCMNAND help This enables support for systems based on Broadcom IPROC architected SoCs. The IPROC complex contains one or more ARM CPUs along with common diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h index 03d401d20453..3f29e6bca058 100644 --- a/arch/arm/mach-dove/include/mach/irqs.h +++ b/arch/arm/mach-dove/include/mach/irqs.h @@ -14,73 +14,73 @@ /* * Dove Low Interrupt Controller */ -#define IRQ_DOVE_BRIDGE 0 -#define IRQ_DOVE_H2C 1 -#define IRQ_DOVE_C2H 2 -#define IRQ_DOVE_NAND 3 -#define IRQ_DOVE_PDMA 4 -#define IRQ_DOVE_SPI1 5 -#define IRQ_DOVE_SPI0 6 -#define IRQ_DOVE_UART_0 7 -#define IRQ_DOVE_UART_1 8 -#define IRQ_DOVE_UART_2 9 -#define IRQ_DOVE_UART_3 10 -#define IRQ_DOVE_I2C 11 -#define IRQ_DOVE_GPIO_0_7 12 -#define IRQ_DOVE_GPIO_8_15 13 -#define IRQ_DOVE_GPIO_16_23 14 -#define IRQ_DOVE_PCIE0_ERR 15 -#define IRQ_DOVE_PCIE0 16 -#define IRQ_DOVE_PCIE1_ERR 17 -#define IRQ_DOVE_PCIE1 18 -#define IRQ_DOVE_I2S0 19 -#define IRQ_DOVE_I2S0_ERR 20 -#define IRQ_DOVE_I2S1 21 -#define IRQ_DOVE_I2S1_ERR 22 -#define IRQ_DOVE_USB_ERR 23 -#define IRQ_DOVE_USB0 24 -#define IRQ_DOVE_USB1 25 -#define IRQ_DOVE_GE00_RX 26 -#define IRQ_DOVE_GE00_TX 27 -#define IRQ_DOVE_GE00_MISC 28 -#define IRQ_DOVE_GE00_SUM 29 -#define IRQ_DOVE_GE00_ERR 30 -#define IRQ_DOVE_CRYPTO 31 +#define IRQ_DOVE_BRIDGE (1 + 0) +#define IRQ_DOVE_H2C (1 + 1) +#define IRQ_DOVE_C2H (1 + 2) +#define IRQ_DOVE_NAND (1 + 3) +#define IRQ_DOVE_PDMA (1 + 4) +#define IRQ_DOVE_SPI1 (1 + 5) +#define IRQ_DOVE_SPI0 (1 + 6) +#define IRQ_DOVE_UART_0 (1 + 7) +#define IRQ_DOVE_UART_1 (1 + 8) +#define IRQ_DOVE_UART_2 (1 + 9) +#define IRQ_DOVE_UART_3 (1 + 10) +#define IRQ_DOVE_I2C (1 + 11) +#define IRQ_DOVE_GPIO_0_7 (1 + 12) +#define IRQ_DOVE_GPIO_8_15 (1 + 13) +#define IRQ_DOVE_GPIO_16_23 (1 + 14) +#define IRQ_DOVE_PCIE0_ERR (1 + 15) +#define IRQ_DOVE_PCIE0 (1 + 16) +#define IRQ_DOVE_PCIE1_ERR (1 + 17) +#define IRQ_DOVE_PCIE1 (1 + 18) +#define IRQ_DOVE_I2S0 (1 + 19) +#define IRQ_DOVE_I2S0_ERR (1 + 20) +#define IRQ_DOVE_I2S1 (1 + 21) +#define IRQ_DOVE_I2S1_ERR (1 + 22) +#define IRQ_DOVE_USB_ERR (1 + 23) +#define IRQ_DOVE_USB0 (1 + 24) +#define IRQ_DOVE_USB1 (1 + 25) +#define IRQ_DOVE_GE00_RX (1 + 26) +#define IRQ_DOVE_GE00_TX (1 + 27) +#define IRQ_DOVE_GE00_MISC (1 + 28) +#define IRQ_DOVE_GE00_SUM (1 + 29) +#define IRQ_DOVE_GE00_ERR (1 + 30) +#define IRQ_DOVE_CRYPTO (1 + 31) /* * Dove High Interrupt Controller */ -#define IRQ_DOVE_AC97 32 -#define IRQ_DOVE_PMU 33 -#define IRQ_DOVE_CAM 34 -#define IRQ_DOVE_SDIO0 35 -#define IRQ_DOVE_SDIO1 36 -#define IRQ_DOVE_SDIO0_WAKEUP 37 -#define IRQ_DOVE_SDIO1_WAKEUP 38 -#define IRQ_DOVE_XOR_00 39 -#define IRQ_DOVE_XOR_01 40 -#define IRQ_DOVE_XOR0_ERR 41 -#define IRQ_DOVE_XOR_10 42 -#define IRQ_DOVE_XOR_11 43 -#define IRQ_DOVE_XOR1_ERR 44 -#define IRQ_DOVE_LCD_DCON 45 -#define IRQ_DOVE_LCD1 46 -#define IRQ_DOVE_LCD0 47 -#define IRQ_DOVE_GPU 48 -#define IRQ_DOVE_PERFORM_MNTR 49 -#define IRQ_DOVE_VPRO_DMA1 51 -#define IRQ_DOVE_SSP_TIMER 54 -#define IRQ_DOVE_SSP 55 -#define IRQ_DOVE_MC_L2_ERR 56 -#define IRQ_DOVE_CRYPTO_ERR 59 -#define IRQ_DOVE_GPIO_24_31 60 -#define IRQ_DOVE_HIGH_GPIO 61 -#define IRQ_DOVE_SATA 62 +#define IRQ_DOVE_AC97 (1 + 32) +#define IRQ_DOVE_PMU (1 + 33) +#define IRQ_DOVE_CAM (1 + 34) +#define IRQ_DOVE_SDIO0 (1 + 35) +#define IRQ_DOVE_SDIO1 (1 + 36) +#define IRQ_DOVE_SDIO0_WAKEUP (1 + 37) +#define IRQ_DOVE_SDIO1_WAKEUP (1 + 38) +#define IRQ_DOVE_XOR_00 (1 + 39) +#define IRQ_DOVE_XOR_01 (1 + 40) +#define IRQ_DOVE_XOR0_ERR (1 + 41) +#define IRQ_DOVE_XOR_10 (1 + 42) +#define IRQ_DOVE_XOR_11 (1 + 43) +#define IRQ_DOVE_XOR1_ERR (1 + 44) +#define IRQ_DOVE_LCD_DCON (1 + 45) +#define IRQ_DOVE_LCD1 (1 + 46) +#define IRQ_DOVE_LCD0 (1 + 47) +#define IRQ_DOVE_GPU (1 + 48) +#define IRQ_DOVE_PERFORM_MNTR (1 + 49) +#define IRQ_DOVE_VPRO_DMA1 (1 + 51) +#define IRQ_DOVE_SSP_TIMER (1 + 54) +#define IRQ_DOVE_SSP (1 + 55) +#define IRQ_DOVE_MC_L2_ERR (1 + 56) +#define IRQ_DOVE_CRYPTO_ERR (1 + 59) +#define IRQ_DOVE_GPIO_24_31 (1 + 60) +#define IRQ_DOVE_HIGH_GPIO (1 + 61) +#define IRQ_DOVE_SATA (1 + 62) /* * DOVE General Purpose Pins */ -#define IRQ_DOVE_GPIO_START 64 +#define IRQ_DOVE_GPIO_START 65 #define NR_GPIO_IRQS 64 /* diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index 4a5a7aedcb76..df0223f76fa9 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -126,14 +126,14 @@ __exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs) stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_LOW_OFF); stat &= readl_relaxed(dove_irq_base + IRQ_MASK_LOW_OFF); if (stat) { - unsigned int hwirq = __fls(stat); + unsigned int hwirq = 1 + __fls(stat); handle_IRQ(hwirq, regs); return; } stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_HIGH_OFF); stat &= readl_relaxed(dove_irq_base + IRQ_MASK_HIGH_OFF); if (stat) { - unsigned int hwirq = 32 + __fls(stat); + unsigned int hwirq = 33 + __fls(stat); handle_IRQ(hwirq, regs); return; } @@ -144,8 +144,8 @@ void __init dove_init_irq(void) { int i; - orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); - orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); + orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); + orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); #ifdef CONFIG_MULTI_IRQ_HANDLER set_handle_irq(dove_legacy_handle_irq); diff --git a/arch/arm/mach-mvebu/pm-board.c b/arch/arm/mach-mvebu/pm-board.c index 6dfd4ab97b2a..301ab38d38ba 100644 --- a/arch/arm/mach-mvebu/pm-board.c +++ b/arch/arm/mach-mvebu/pm-board.c @@ -43,6 +43,9 @@ static void mvebu_armada_xp_gp_pm_enter(void __iomem *sdram_reg, u32 srcmd) for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++) ackcmd |= BIT(pic_raw_gpios[i]); + srcmd = cpu_to_le32(srcmd); + ackcmd = cpu_to_le32(ackcmd); + /* * Wait a while, the PIC needs quite a bit of time between the * two GPIO commands. diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index 0bb287ca0a98..0689c3fb56e3 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -717,6 +717,19 @@ phy-names = "sata-phy"; }; + sbgpio: sbgpio@17001000{ + compatible = "apm,xgene-gpio-sb"; + reg = <0x0 0x17001000 0x0 0x400>; + #gpio-cells = <2>; + gpio-controller; + interrupts = <0x0 0x28 0x1>, + <0x0 0x29 0x1>, + <0x0 0x2a 0x1>, + <0x0 0x2b 0x1>, + <0x0 0x2c 0x1>, + <0x0 0x2d 0x1>; + }; + rtc: rtc@10510000 { compatible = "apm,xgene-rtc"; reg = <0x0 0x10510000 0x0 0x400>; diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 9df2b6801f76..b2b411da297b 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -43,6 +43,7 @@ #include <linux/regulator/consumer.h> #include <linux/pinctrl/consumer.h> #include <linux/pm_runtime.h> +#include <linux/pm_wakeirq.h> #include <linux/platform_data/hsmmc-omap.h> /* OMAP HSMMC Host Controller Registers */ @@ -218,7 +219,6 @@ struct omap_hsmmc_host { unsigned int flags; #define AUTO_CMD23 (1 << 0) /* Auto CMD23 support */ #define HSMMC_SDIO_IRQ_ENABLED (1 << 1) /* SDIO irq enabled */ -#define HSMMC_WAKE_IRQ_ENABLED (1 << 2) struct omap_hsmmc_next next_data; struct omap_hsmmc_platform_data *pdata; @@ -1117,22 +1117,6 @@ static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id) return IRQ_HANDLED; } -static irqreturn_t omap_hsmmc_wake_irq(int irq, void *dev_id) -{ - struct omap_hsmmc_host *host = dev_id; - - /* cirq is level triggered, disable to avoid infinite loop */ - spin_lock(&host->irq_lock); - if (host->flags & HSMMC_WAKE_IRQ_ENABLED) { - disable_irq_nosync(host->wake_irq); - host->flags &= ~HSMMC_WAKE_IRQ_ENABLED; - } - spin_unlock(&host->irq_lock); - pm_request_resume(host->dev); /* no use counter */ - - return IRQ_HANDLED; -} - static void set_sd_bus_power(struct omap_hsmmc_host *host) { unsigned long i; @@ -1665,7 +1649,6 @@ static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable) static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host) { - struct mmc_host *mmc = host->mmc; int ret; /* @@ -1677,11 +1660,7 @@ static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host) if (!host->dev->of_node || !host->wake_irq) return -ENODEV; - /* Prevent auto-enabling of IRQ */ - irq_set_status_flags(host->wake_irq, IRQ_NOAUTOEN); - ret = devm_request_irq(host->dev, host->wake_irq, omap_hsmmc_wake_irq, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, - mmc_hostname(mmc), host); + ret = dev_pm_set_dedicated_wake_irq(host->dev, host->wake_irq); if (ret) { dev_err(mmc_dev(host->mmc), "Unable to request wake IRQ\n"); goto err; @@ -1718,7 +1697,7 @@ static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host) return 0; err_free_irq: - devm_free_irq(host->dev, host->wake_irq, host); + dev_pm_clear_wake_irq(host->dev); err: dev_warn(host->dev, "no SDIO IRQ support, falling back to polling\n"); host->wake_irq = 0; @@ -2007,6 +1986,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev) omap_hsmmc_ops.multi_io_quirk = omap_hsmmc_multi_io_quirk; } + device_init_wakeup(&pdev->dev, true); pm_runtime_enable(host->dev); pm_runtime_get_sync(host->dev); pm_runtime_set_autosuspend_delay(host->dev, MMC_AUTOSUSPEND_DELAY); @@ -2147,6 +2127,7 @@ err_slot_name: if (host->use_reg) omap_hsmmc_reg_put(host); err_irq: + device_init_wakeup(&pdev->dev, false); if (host->tx_chan) dma_release_channel(host->tx_chan); if (host->rx_chan) @@ -2178,6 +2159,7 @@ static int omap_hsmmc_remove(struct platform_device *pdev) pm_runtime_put_sync(host->dev); pm_runtime_disable(host->dev); + device_init_wakeup(&pdev->dev, false); if (host->dbclk) clk_disable_unprepare(host->dbclk); @@ -2204,11 +2186,6 @@ static int omap_hsmmc_suspend(struct device *dev) OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP); } - /* do not wake up due to sdio irq */ - if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && - !(host->mmc->pm_flags & MMC_PM_WAKE_SDIO_IRQ)) - disable_irq(host->wake_irq); - if (host->dbclk) clk_disable_unprepare(host->dbclk); @@ -2233,11 +2210,6 @@ static int omap_hsmmc_resume(struct device *dev) omap_hsmmc_conf_bus_power(host); omap_hsmmc_protect_card(host); - - if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && - !(host->mmc->pm_flags & MMC_PM_WAKE_SDIO_IRQ)) - enable_irq(host->wake_irq); - pm_runtime_mark_last_busy(host->dev); pm_runtime_put_autosuspend(host->dev); return 0; @@ -2277,10 +2249,6 @@ static int omap_hsmmc_runtime_suspend(struct device *dev) } pinctrl_pm_select_idle_state(dev); - - WARN_ON(host->flags & HSMMC_WAKE_IRQ_ENABLED); - enable_irq(host->wake_irq); - host->flags |= HSMMC_WAKE_IRQ_ENABLED; } else { pinctrl_pm_select_idle_state(dev); } @@ -2302,11 +2270,6 @@ static int omap_hsmmc_runtime_resume(struct device *dev) spin_lock_irqsave(&host->irq_lock, flags); if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && (host->flags & HSMMC_SDIO_IRQ_ENABLED)) { - /* sdio irq flag can't change while in runtime suspend */ - if (host->flags & HSMMC_WAKE_IRQ_ENABLED) { - disable_irq_nosync(host->wake_irq); - host->flags &= ~HSMMC_WAKE_IRQ_ENABLED; - } pinctrl_pm_select_default_state(host->dev); diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c index b562af816c0a..b04b05a0904e 100644 --- a/drivers/soc/qcom/spm.c +++ b/drivers/soc/qcom/spm.c @@ -260,7 +260,7 @@ static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu) /* We have atleast one power down mode */ cpumask_clear(&mask); cpumask_set_cpu(cpu, &mask); - qcom_scm_set_warm_boot_addr(cpu_resume, &mask); + qcom_scm_set_warm_boot_addr(cpu_resume_arm, &mask); } per_cpu(qcom_idle_ops, cpu) = fns; diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 978204333c94..d75a66c72750 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -22,6 +22,7 @@ #include <linux/pm_runtime.h> #include <linux/console.h> #include <linux/pm_qos.h> +#include <linux/pm_wakeirq.h> #include <linux/dma-mapping.h> #include "8250.h" @@ -552,17 +553,6 @@ static void omap8250_uart_qos_work(struct work_struct *work) pm_qos_update_request(&priv->pm_qos_request, priv->latency); } -static irqreturn_t omap_wake_irq(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - int ret; - - ret = port->handle_irq(port); - if (ret) - return IRQ_HANDLED; - return IRQ_NONE; -} - #ifdef CONFIG_SERIAL_8250_DMA static int omap_8250_dma_handle_irq(struct uart_port *port); #endif @@ -596,11 +586,9 @@ static int omap_8250_startup(struct uart_port *port) int ret; if (priv->wakeirq) { - ret = request_irq(priv->wakeirq, omap_wake_irq, - port->irqflags, "uart wakeup irq", port); + ret = dev_pm_set_dedicated_wake_irq(port->dev, priv->wakeirq); if (ret) return ret; - disable_irq(priv->wakeirq); } pm_runtime_get_sync(port->dev); @@ -649,8 +637,7 @@ static int omap_8250_startup(struct uart_port *port) err: pm_runtime_mark_last_busy(port->dev); pm_runtime_put_autosuspend(port->dev); - if (priv->wakeirq) - free_irq(priv->wakeirq, port); + dev_pm_clear_wake_irq(port->dev); return ret; } @@ -682,10 +669,8 @@ static void omap_8250_shutdown(struct uart_port *port) pm_runtime_mark_last_busy(port->dev); pm_runtime_put_autosuspend(port->dev); - free_irq(port->irq, port); - if (priv->wakeirq) - free_irq(priv->wakeirq, port); + dev_pm_clear_wake_irq(port->dev); } static void omap_8250_throttle(struct uart_port *port) @@ -1226,31 +1211,6 @@ static int omap8250_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM - -static inline void omap8250_enable_wakeirq(struct omap8250_priv *priv, - bool enable) -{ - if (!priv->wakeirq) - return; - - if (enable) - enable_irq(priv->wakeirq); - else - disable_irq_nosync(priv->wakeirq); -} - -static void omap8250_enable_wakeup(struct omap8250_priv *priv, - bool enable) -{ - if (enable == priv->wakeups_enabled) - return; - - omap8250_enable_wakeirq(priv, enable); - priv->wakeups_enabled = enable; -} -#endif - #ifdef CONFIG_PM_SLEEP static int omap8250_prepare(struct device *dev) { @@ -1277,11 +1237,6 @@ static int omap8250_suspend(struct device *dev) serial8250_suspend_port(priv->line); flush_work(&priv->qos_work); - - if (device_may_wakeup(dev)) - omap8250_enable_wakeup(priv, true); - else - omap8250_enable_wakeup(priv, false); return 0; } @@ -1289,9 +1244,6 @@ static int omap8250_resume(struct device *dev) { struct omap8250_priv *priv = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) - omap8250_enable_wakeup(priv, false); - serial8250_resume_port(priv->line); return 0; } @@ -1333,7 +1285,6 @@ static int omap8250_runtime_suspend(struct device *dev) return -EBUSY; } - omap8250_enable_wakeup(priv, true); if (up->dma) omap_8250_rx_dma(up, UART_IIR_RX_TIMEOUT); @@ -1354,7 +1305,6 @@ static int omap8250_runtime_resume(struct device *dev) return 0; up = serial8250_get_port(priv->line); - omap8250_enable_wakeup(priv, false); loss_cntx = omap8250_lost_context(up); if (loss_cntx) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 7f49172ccd86..7a2172b5e93c 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -38,6 +38,7 @@ #include <linux/serial_core.h> #include <linux/irq.h> #include <linux/pm_runtime.h> +#include <linux/pm_wakeirq.h> #include <linux/of.h> #include <linux/of_irq.h> #include <linux/gpio.h> @@ -160,7 +161,6 @@ struct uart_omap_port { unsigned long port_activity; int context_loss_cnt; u32 errata; - u8 wakeups_enabled; u32 features; int rts_gpio; @@ -209,28 +209,11 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up) return pdata->get_context_loss_count(up->dev); } -static inline void serial_omap_enable_wakeirq(struct uart_omap_port *up, - bool enable) -{ - if (!up->wakeirq) - return; - - if (enable) - enable_irq(up->wakeirq); - else - disable_irq_nosync(up->wakeirq); -} - +/* REVISIT: Remove this when omap3 boots in device tree only mode */ static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable) { struct omap_uart_port_info *pdata = dev_get_platdata(up->dev); - if (enable == up->wakeups_enabled) - return; - - serial_omap_enable_wakeirq(up, enable); - up->wakeups_enabled = enable; - if (!pdata || !pdata->enable_wakeup) return; @@ -750,13 +733,11 @@ static int serial_omap_startup(struct uart_port *port) /* Optional wake-up IRQ */ if (up->wakeirq) { - retval = request_irq(up->wakeirq, serial_omap_irq, - up->port.irqflags, up->name, up); + retval = dev_pm_set_dedicated_wake_irq(up->dev, up->wakeirq); if (retval) { free_irq(up->port.irq, up); return retval; } - disable_irq(up->wakeirq); } dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line); @@ -845,8 +826,7 @@ static void serial_omap_shutdown(struct uart_port *port) pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); free_irq(up->port.irq, up); - if (up->wakeirq) - free_irq(up->wakeirq, up); + dev_pm_clear_wake_irq(up->dev); } static void serial_omap_uart_qos_work(struct work_struct *work) @@ -1139,13 +1119,6 @@ serial_omap_pm(struct uart_port *port, unsigned int state, serial_out(up, UART_EFR, efr); serial_out(up, UART_LCR, 0); - if (!device_may_wakeup(up->dev)) { - if (!state) - pm_runtime_forbid(up->dev); - else - pm_runtime_allow(up->dev); - } - pm_runtime_mark_last_busy(up->dev); pm_runtime_put_autosuspend(up->dev); } |