diff options
893 files changed, 18627 insertions, 7783 deletions
@@ -1823,6 +1823,11 @@ S: Kattreinstr 38 S: D-64295 S: Germany +N: Avi Kivity +E: avi.kivity@gmail.com +D: Kernel-based Virtual Machine (KVM) +S: Ra'annana, Israel + N: Andi Kleen E: andi@firstfloor.org U: http://www.halobates.de diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index fc81a7d6b0f1..db5858e32d3f 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -9,6 +9,10 @@ Required properties (in root node): FPGA type interrupt controllers, see the versatile-fpga-irq binding doc. +In the root node the Integrator/CP must have a /cpcon node pointing +to the CP control registers, and the Integrator/AP must have a +/syscon node pointing to the Integrator/AP system controller. + ARM Versatile Application and Platform Baseboards ------------------------------------------------- diff --git a/Documentation/devicetree/bindings/arm/davinci.txt b/Documentation/devicetree/bindings/arm/davinci.txt new file mode 100644 index 000000000000..cfaeda4274e6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/davinci.txt @@ -0,0 +1,17 @@ +Texas Instruments DaVinci Platforms Device Tree Bindings +-------------------------------------------------------- + +DA850/OMAP-L138/AM18x Evaluation Module (EVM) board +Required root node properties: + - compatible = "ti,da850-evm", "ti,da850"; + +EnBW AM1808 based CMC board +Required root node properties: + - compatible = "enbw,cmc", "ti,da850; + +Generic DaVinci Boards +---------------------- + +DA850/OMAP-L138/AM18x generic board +Required root node properties: + - compatible = "ti,da850"; diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt index 6528e215c5fe..5216b419016a 100644 --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt @@ -4,14 +4,13 @@ Exynos processors include support for multiple power domains which are used to gate power to one or more peripherals on the processor. Required Properties: -- compatiable: should be one of the following. +- compatible: should be one of the following. * samsung,exynos4210-pd - for exynos4210 type power domain. - reg: physical base address of the controller and length of memory mapped region. -Optional Properties: -- samsung,exynos4210-pd-off: Specifies that the power domain is in turned-off - state during boot and remains to be turned-off until explicitly turned-on. +Node of a device using power domains must have a samsung,power-domain property +defined with a phandle to respective power domain. Example: @@ -19,3 +18,11 @@ Example: compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x10>; }; + +Example of the node using power domain: + + node { + /* ... */ + samsung,power-domain = <&lcd0>; + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index ac9e7516756e..f79818711e83 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -41,6 +41,10 @@ i.MX6 Quad SABRE Smart Device Board Required root node properties: - compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; +i.MX6 Quad SABRE Automotive Board +Required root node properties: + - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; + Generic i.MX boards ------------------- diff --git a/Documentation/devicetree/bindings/arm/omap/counter.txt b/Documentation/devicetree/bindings/arm/omap/counter.txt new file mode 100644 index 000000000000..5bd8aa091315 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/counter.txt @@ -0,0 +1,15 @@ +OMAP Counter-32K bindings + +Required properties: +- compatible: Must be "ti,omap-counter32k" for OMAP controllers +- reg: Contains timer register address range (base address and length) +- ti,hwmods: Name of the hwmod associated to the counter, which is typically + "counter_32k" + +Example: + +counter32k: counter@4a304000 { + compatible = "ti,omap-counter32k"; + reg = <0x4a304000 0x20>; + ti,hwmods = "counter_32k"; +}; diff --git a/Documentation/devicetree/bindings/arm/omap/timer.txt b/Documentation/devicetree/bindings/arm/omap/timer.txt new file mode 100644 index 000000000000..8732d4d41f8b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/timer.txt @@ -0,0 +1,31 @@ +OMAP Timer bindings + +Required properties: +- compatible: Must be "ti,omap2-timer" for OMAP2+ controllers. +- reg: Contains timer register address range (base address and + length). +- interrupts: Contains the interrupt information for the timer. The + format is being dependent on which interrupt controller + the OMAP device uses. +- ti,hwmods: Name of the hwmod associated to the timer, "timer<X>", + where <X> is the instance number of the timer from the + HW spec. + +Optional properties: +- ti,timer-alwon: Indicates the timer is in an alway-on power domain. +- ti,timer-dsp: Indicates the timer can interrupt the on-chip DSP in + addition to the ARM CPU. +- ti,timer-pwm: Indicates the timer can generate a PWM output. +- ti,timer-secure: Indicates the timer is reserved on a secure OMAP device + and therefore cannot be used by the kernel. + +Example: + +timer12: timer@48304000 { + compatible = "ti,omap2-timer"; + reg = <0x48304000 0x400>; + interrupts = <95>; + ti,hwmods = "timer12" + ti,timer-alwon; + ti,timer-secure; +}; diff --git a/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt new file mode 100644 index 000000000000..37824fac688e --- /dev/null +++ b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt @@ -0,0 +1,14 @@ +* Samsung SATA PHY Controller + +SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers. +Each SATA PHY controller should have its own node. + +Required properties: +- compatible : compatible list, contains "samsung,exynos5-sata-phy" +- reg : <registers mapping> + +Example: + sata@ffe07000 { + compatible = "samsung,exynos5-sata-phy"; + reg = <0xffe07000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/ata/exynos-sata.txt b/Documentation/devicetree/bindings/ata/exynos-sata.txt new file mode 100644 index 000000000000..0849f1025e34 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/exynos-sata.txt @@ -0,0 +1,17 @@ +* Samsung AHCI SATA Controller + +SATA nodes are defined to describe on-chip Serial ATA controllers. +Each SATA controller should have its own node. + +Required properties: +- compatible : compatible list, contains "samsung,exynos5-sata" +- interrupts : <interrupt mapping for SATA IRQ> +- reg : <registers mapping> +- samsung,sata-freq : <frequency in MHz> + +Example: + sata@ffe08000 { + compatible = "samsung,exynos5-sata"; + reg = <0xffe08000 0x1000>; + interrupts = <115>; + }; diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt index d2fe064a828b..63dd8051521c 100644 --- a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt +++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt @@ -2,9 +2,27 @@ properties: - compatible : Should be "ti,omap-ocp2scp" +- reg : Address and length of the register set for the device - #address-cells, #size-cells : Must be present if the device has sub-nodes - ranges : the child address space are mapped 1:1 onto the parent address space - ti,hwmods : must be "ocp2scp_usb_phy" Sub-nodes: All the devices connected to ocp2scp are described using sub-node to ocp2scp + +ocp2scp@4a0ad000 { + compatible = "ti,omap-ocp2scp"; + reg = <0x4a0ad000 0x1f>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp_usb_phy"; + + subnode1 { + ... + }; + + subnode2 { + ... + }; +}; diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt new file mode 100644 index 000000000000..c2a3525ecb4e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt @@ -0,0 +1,162 @@ +* Clock bindings for Freescale i.MX25 + +Required properties: +- compatible: Should be "fsl,imx25-ccm" +- reg: Address and length of the register set +- interrupts: Should contain CCM interrupt +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. The following is a full list of i.MX25 +clocks and IDs. + + Clock ID + --------------------------- + dummy 0 + osc 1 + mpll 2 + upll 3 + mpll_cpu_3_4 4 + cpu_sel 5 + cpu 6 + ahb 7 + usb_div 8 + ipg 9 + per0_sel 10 + per1_sel 11 + per2_sel 12 + per3_sel 13 + per4_sel 14 + per5_sel 15 + per6_sel 16 + per7_sel 17 + per8_sel 18 + per9_sel 19 + per10_sel 20 + per11_sel 21 + per12_sel 22 + per13_sel 23 + per14_sel 24 + per15_sel 25 + per0 26 + per1 27 + per2 28 + per3 29 + per4 30 + per5 31 + per6 32 + per7 33 + per8 34 + per9 35 + per10 36 + per11 37 + per12 38 + per13 39 + per14 40 + per15 41 + csi_ipg_per 42 + epit_ipg_per 43 + esai_ipg_per 44 + esdhc1_ipg_per 45 + esdhc2_ipg_per 46 + gpt_ipg_per 47 + i2c_ipg_per 48 + lcdc_ipg_per 49 + nfc_ipg_per 50 + owire_ipg_per 51 + pwm_ipg_per 52 + sim1_ipg_per 53 + sim2_ipg_per 54 + ssi1_ipg_per 55 + ssi2_ipg_per 56 + uart_ipg_per 57 + ata_ahb 58 + reserved 59 + csi_ahb 60 + emi_ahb 61 + esai_ahb 62 + esdhc1_ahb 63 + esdhc2_ahb 64 + fec_ahb 65 + lcdc_ahb 66 + rtic_ahb 67 + sdma_ahb 68 + slcdc_ahb 69 + usbotg_ahb 70 + reserved 71 + reserved 72 + reserved 73 + reserved 74 + can1_ipg 75 + can2_ipg 76 + csi_ipg 77 + cspi1_ipg 78 + cspi2_ipg 79 + cspi3_ipg 80 + dryice_ipg 81 + ect_ipg 82 + epit1_ipg 83 + epit2_ipg 84 + reserved 85 + esdhc1_ipg 86 + esdhc2_ipg 87 + fec_ipg 88 + reserved 89 + reserved 90 + reserved 91 + gpt1_ipg 92 + gpt2_ipg 93 + gpt3_ipg 94 + gpt4_ipg 95 + reserved 96 + reserved 97 + reserved 98 + iim_ipg 99 + reserved 100 + reserved 101 + kpp_ipg 102 + lcdc_ipg 103 + reserved 104 + pwm1_ipg 105 + pwm2_ipg 106 + pwm3_ipg 107 + pwm4_ipg 108 + rngb_ipg 109 + reserved 110 + scc_ipg 111 + sdma_ipg 112 + sim1_ipg 113 + sim2_ipg 114 + slcdc_ipg 115 + spba_ipg 116 + ssi1_ipg 117 + ssi2_ipg 118 + tsc_ipg 119 + uart1_ipg 120 + uart2_ipg 121 + uart3_ipg 122 + uart4_ipg 123 + uart5_ipg 124 + reserved 125 + wdt_ipg 126 + +Examples: + +clks: ccm@53f80000 { + compatible = "fsl,imx25-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + clock-output-names = ... + "uart_ipg", + "uart_serial", + ...; +}; + +uart1: serial@43f90000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + clocks = <&clks 79>, <&clks 50>; + clock-names = "ipg", "per"; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt new file mode 100644 index 000000000000..23ae1db1bc13 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt @@ -0,0 +1,55 @@ +Device Tree Clock bindings for the Zynq 7000 EPP + +The Zynq EPP has several different clk providers, each with there own bindings. +The purpose of this document is to document their usage. + +See clock_bindings.txt for more information on the generic clock bindings. +See Chapter 25 of Zynq TRM for more information about Zynq clocks. + +== PLLs == + +Used to describe the ARM_PLL, DDR_PLL, and IO_PLL. + +Required properties: +- #clock-cells : shall be 0 (only one clock is output from this node) +- compatible : "xlnx,zynq-pll" +- reg : pair of u32 values, which are the address offsets within the SLCR + of the relevant PLL_CTRL register and PLL_CFG register respectively +- clocks : phandle for parent clock. should be the phandle for ps_clk + +Optional properties: +- clock-output-names : name of the output clock + +Example: + armpll: armpll { + #clock-cells = <0>; + compatible = "xlnx,zynq-pll"; + clocks = <&ps_clk>; + reg = <0x100 0x110>; + clock-output-names = "armpll"; + }; + +== Peripheral clocks == + +Describes clock node for the SDIO, SMC, SPI, QSPI, and UART clocks. + +Required properties: +- #clock-cells : shall be 1 +- compatible : "xlnx,zynq-periph-clock" +- reg : a single u32 value, describing the offset within the SLCR where + the CLK_CTRL register is found for this peripheral +- clocks : phandle for parent clocks. should hold phandles for + the IO_PLL, ARM_PLL, and DDR_PLL in order +- clock-output-names : names of the output clock(s). For peripherals that have + two output clocks (for example, the UART), two clocks + should be listed. + +Example: + uart_clk: uart_clk { + #clock-cells = <1>; + compatible = "xlnx,zynq-periph-clock"; + clocks = <&iopll &armpll &ddrpll>; + reg = <0x154>; + clock-output-names = "uart0_ref_clk", + "uart1_ref_clk"; + }; diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmi.txt b/Documentation/devicetree/bindings/drm/exynos/hdmi.txt new file mode 100644 index 000000000000..589edee37394 --- /dev/null +++ b/Documentation/devicetree/bindings/drm/exynos/hdmi.txt @@ -0,0 +1,22 @@ +Device-Tree bindings for drm hdmi driver + +Required properties: +- compatible: value should be "samsung,exynos5-hdmi". +- reg: physical base address of the hdmi and length of memory mapped + region. +- interrupts: interrupt number to the cpu. +- hpd-gpio: following information about the hotplug gpio pin. + a) phandle of the gpio controller node. + b) pin number within the gpio controller. + c) pin function mode. + d) optional flags and pull up/down. + e) drive strength. + +Example: + + hdmi { + compatible = "samsung,exynos5-hdmi"; + reg = <0x14530000 0x100000>; + interrupts = <0 95 0>; + hpd-gpio = <&gpx3 7 0xf 1 3>; + }; diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt b/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt new file mode 100644 index 000000000000..fa166d945809 --- /dev/null +++ b/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt @@ -0,0 +1,12 @@ +Device-Tree bindings for hdmiddc driver + +Required properties: +- compatible: value should be "samsung,exynos5-hdmiddc". +- reg: I2C address of the hdmiddc device. + +Example: + + hdmiddc { + compatible = "samsung,exynos5-hdmiddc"; + reg = <0x50>; + }; diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt b/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt new file mode 100644 index 000000000000..858f4f9b902f --- /dev/null +++ b/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt @@ -0,0 +1,12 @@ +Device-Tree bindings for hdmiphy driver + +Required properties: +- compatible: value should be "samsung,exynos5-hdmiphy". +- reg: I2C address of the hdmiphy device. + +Example: + + hdmiphy { + compatible = "samsung,exynos5-hdmiphy"; + reg = <0x38>; + }; diff --git a/Documentation/devicetree/bindings/drm/exynos/mixer.txt b/Documentation/devicetree/bindings/drm/exynos/mixer.txt new file mode 100644 index 000000000000..9b2ea0343566 --- /dev/null +++ b/Documentation/devicetree/bindings/drm/exynos/mixer.txt @@ -0,0 +1,15 @@ +Device-Tree bindings for mixer driver + +Required properties: +- compatible: value should be "samsung,exynos5-mixer". +- reg: physical base address of the mixer and length of memory mapped + region. +- interrupts: interrupt number to the cpu. + +Example: + + mixer { + compatible = "samsung,exynos5-mixer"; + reg = <0x14450000 0x10000>; + interrupts = <0 94 0>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt new file mode 100644 index 000000000000..558cdf3c9abc --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt @@ -0,0 +1,22 @@ +GPIO line that should be set high/low to power off a device + +Required properties: +- compatible : should be "gpio-poweroff". +- gpios : The GPIO to set high/low, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be + low to power down the board set it to "Active Low", otherwise set + gpio to "Active High". + +Optional properties: +- input : Initially configure the GPIO line as an input. Only reconfigure + it to an output when the pm_power_off function is called. If this optional + property is not specified, the GPIO is initialized as an output in its + inactive state. + + +Examples: + +gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 4 0>; /* GPIO 4 Active Low */ +}; diff --git a/Documentation/devicetree/bindings/gpio/leds-ns2.txt b/Documentation/devicetree/bindings/gpio/leds-ns2.txt new file mode 100644 index 000000000000..aef3aca34d2d --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/leds-ns2.txt @@ -0,0 +1,26 @@ +Binding for dual-GPIO LED found on Network Space v2 (and parents). + +Required properties: +- compatible: "lacie,ns2-leds". + +Each LED is represented as a sub-node of the ns2-leds device. + +Required sub-node properties: +- cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification. +- slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification. + +Optional sub-node properties: +- label: Name for this LED. If omitted, the label is taken from the node name. +- linux,default-trigger: Trigger assigned to the LED. + +Example: + +ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; +}; diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt index f3cf43b66f7e..3614242e7732 100644 --- a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt @@ -12,13 +12,13 @@ Optional properties: Examples: i2c@83fc4000 { /* I2C2 on i.MX51 */ - compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; reg = <0x83fc4000 0x4000>; interrupts = <63>; }; i2c@70038000 { /* HS-I2C on i.MX51 */ - compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; reg = <0x70038000 0x4000>; interrupts = <64>; clock-frequency = <400000>; diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index 2f5322b119eb..446859fcdca4 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -55,5 +55,7 @@ st-micro,24c256 i2c serial eeprom (24cxx) stm,m41t00 Serial Access TIMEKEEPER stm,m41t62 Serial real-time clock (RTC) with alarm stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS +taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface ti,tsc2003 I2C Touch-Screen Controller ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface +ti,tmp275 Digital Temperature Sensor diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt new file mode 100644 index 000000000000..ca5a2c86480c --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt @@ -0,0 +1,28 @@ +* Rohm BU21013 Touch Screen + +Required properties: + - compatible : "rohm,bu21013_tp" + - reg : I2C device address + +Optional properties: + - touch-gpio : GPIO pin registering a touch event + - <supply_name>-supply : Phandle to a regulator supply + - rohm,touch-max-x : Maximum outward permitted limit in the X axis + - rohm,touch-max-y : Maximum outward permitted limit in the Y axis + - rohm,flip-x : Flip touch coordinates on the X axis + - rohm,flip-y : Flip touch coordinates on the Y axis + +Example: + + i2c@80110000 { + bu21013_tp@0x5c { + compatible = "rohm,bu21013_tp"; + reg = <0x5c>; + touch-gpio = <&gpio2 20 0x4>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + + rohm,touch-max-x = <384>; + rohm,touch-max-y = <704>; + rohm,flip-y; + }; + }; diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt new file mode 100644 index 000000000000..67ec3d4ccc7f --- /dev/null +++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt @@ -0,0 +1,23 @@ +* Samsung Multi Format Codec (MFC) + +Multi Format Codec (MFC) is the IP present in Samsung SoCs which +supports high resolution decoding and encoding functionalities. +The MFC device driver is a v4l2 driver which can encode/decode +video raw/elementary streams and has support for all popular +video codecs. + +Required properties: + - compatible : value should be either one among the following + (a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs + (b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs + + - reg : Physical base address of the IP registers and length of memory + mapped region. + + - interrupts : MFC interrupt number to the CPU. + + - samsung,mfc-r : Base address of the first memory bank used by MFC + for DMA contiguous memory allocation and its size. + + - samsung,mfc-l : Base address of the second memory bank used by MFC + for DMA contiguous memory allocation and its size. diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.txt b/Documentation/devicetree/bindings/net/mdio-gpio.txt index bc9549529014..c79bab025369 100644 --- a/Documentation/devicetree/bindings/net/mdio-gpio.txt +++ b/Documentation/devicetree/bindings/net/mdio-gpio.txt @@ -8,9 +8,16 @@ gpios property as described in section VIII.1 in the following order: MDC, MDIO. +Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases" +node. + Example: -mdio { +aliases { + mdio-gpio0 = <&mdio0>; +}; + +mdio0: mdio { compatible = "virtual,mdio-gpio"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt index 361bccb7ec89..95daf6335c37 100644 --- a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt @@ -7,8 +7,10 @@ Required properties: - compatible: "marvell,88f6180-pinctrl", "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl", "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl" + "marvell,98dx4122-pinctrl" This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x. +It also support the 88f6281-based variant in the 98dx412x Bobcat SoCs. Available mpp pins/groups and functions: Note: brackets (x) are not part of the mpp name for marvell,function and given @@ -277,3 +279,40 @@ mpp46 46 gpio, ts(mp10), tdm(fs), lcd(hsync) mpp47 47 gpio, ts(mp11), tdm(drx), lcd(vsync) mpp48 48 gpio, ts(mp12), tdm(dtx), lcd(d16) mpp49 49 gpo, tdm(rx0ql), pex(clkreq), lcd(d17) + +* Marvell Bobcat 98dx4122 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd) +mpp5 5 gpo, nand(io7), uart0(txd) +mpp6 6 sysrst(out), spi(mosi) +mpp7 7 gpo, pex(rsto), spi(cs) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts) +mpp10 10 gpo, spi(sck), uart0(txd) +mpp11 11 gpio, spi(miso), uart0(rxd) +mpp13 13 gpio, uart1(txd) +mpp14 14 gpio, uart1(rxd) +mpp15 15 gpio, uart0(rts) +mpp16 16 gpio, uart0(cts) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp34 34 gpio +mpp35 35 gpio +mpp36 36 gpio +mpp37 37 gpio +mpp38 38 gpio +mpp39 39 gpio +mpp40 40 gpio +mpp41 41 gpio +mpp42 42 gpio +mpp43 43 gpio +mpp44 44 gpio +mpp45 45 gpio +mpp49 49 gpio + diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index 03dee50532f5..e97a27856b21 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -8,13 +8,20 @@ on-chip controllers onto these pads. Required Properties: - compatible: should be one of the following. - "samsung,pinctrl-exynos4210": for Exynos4210 compatible pin-controller. + - "samsung,pinctrl-exynos4x12": for Exynos4x12 compatible pin-controller. - "samsung,pinctrl-exynos5250": for Exynos5250 compatible pin-controller. - reg: Base address of the pin controller hardware module and length of the address space it occupies. -- interrupts: interrupt specifier for the controller. The format and value of - the interrupt specifier depends on the interrupt parent for the controller. +- Pin banks as child nodes: Pin banks of the controller are represented by child + nodes of the controller node. Bank name is taken from name of the node. Each + bank node must contain following properties: + + - gpio-controller: identifies the node as a gpio controller and pin bank. + - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO + binding is used, the amount of cells must be specified as 2. See generic + GPIO binding documentation for description of particular cells. - Pin mux/config groups as child nodes: The pin mux (selecting pin function mode) and pin config (pull up/down, driver strength) settings are represented @@ -72,16 +79,24 @@ used as system wakeup events. A. External GPIO Interrupts: For supporting external gpio interrupts, the following properties should be specified in the pin-controller device node. -- interrupt-controller: identifies the controller node as interrupt-parent. -- #interrupt-cells: the value of this property should be 2. - - First Cell: represents the external gpio interrupt number local to the - external gpio interrupt space of the controller. - - Second Cell: flags to identify the type of the interrupt - - 1 = rising edge triggered - - 2 = falling edge triggered - - 3 = rising and falling edge triggered - - 4 = high level triggered - - 8 = low level triggered + - interrupt-parent: phandle of the interrupt parent to which the external + GPIO interrupts are forwarded to. + - interrupts: interrupt specifier for the controller. The format and value of + the interrupt specifier depends on the interrupt parent for the controller. + + In addition, following properties must be present in node of every bank + of pins supporting GPIO interrupts: + + - interrupt-controller: identifies the controller node as interrupt-parent. + - #interrupt-cells: the value of this property should be 2. + - First Cell: represents the external gpio interrupt number local to the + external gpio interrupt space of the controller. + - Second Cell: flags to identify the type of the interrupt + - 1 = rising edge triggered + - 2 = falling edge triggered + - 3 = rising and falling edge triggered + - 4 = high level triggered + - 8 = low level triggered B. External Wakeup Interrupts: For supporting external wakeup interrupts, a child node representing the external wakeup interrupt controller should be @@ -94,6 +109,11 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a found on Samsung Exynos4210 SoC. - interrupt-parent: phandle of the interrupt parent to which the external wakeup interrupts are forwarded to. + - interrupts: interrupt used by multiplexed wakeup interrupts. + + In addition, following properties must be present in node of every bank + of pins supporting wake-up interrupts: + - interrupt-controller: identifies the node as interrupt-parent. - #interrupt-cells: the value of this property should be 2 - First Cell: represents the external wakeup interrupt number local to @@ -105,11 +125,63 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a - 4 = high level triggered - 8 = low level triggered + Node of every bank of pins supporting direct wake-up interrupts (without + multiplexing) must contain following properties: + + - interrupt-parent: phandle of the interrupt parent to which the external + wakeup interrupts are forwarded to. + - interrupts: interrupts of the interrupt parent which are used for external + wakeup interrupts from pins of the bank, must contain interrupts for all + pins of the bank. + Aliases: All the pin controller nodes should be represented in the aliases node using the following format 'pinctrl{n}' where n is a unique number for the alias. +Example: A pin-controller node with pin banks: + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,pinctrl-exynos4210"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; + + /* ... */ + + /* Pin bank without external interrupts */ + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + /* ... */ + + /* Pin bank with external GPIO or muxed wake-up interrupts */ + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* ... */ + + /* Pin bank with external direct wake-up interrupts */ + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + #interrupt-cells = <2>; + }; + + /* ... */ + }; + Example 1: A pin-controller node with pin groups. pinctrl_0: pinctrl@11400000 { @@ -117,6 +189,8 @@ Example 1: A pin-controller node with pin groups. reg = <0x11400000 0x1000>; interrupts = <0 47 0>; + /* ... */ + uart0_data: uart0-data { samsung,pins = "gpa0-0", "gpa0-1"; samsung,pin-function = <2>; @@ -158,20 +232,14 @@ Example 2: A pin-controller node with external wakeup interrupt controller node. pinctrl_1: pinctrl@11000000 { compatible = "samsung,pinctrl-exynos4210"; reg = <0x11000000 0x1000>; - interrupts = <0 46 0>; - interrupt-controller; - #interrupt-cells = <2>; + interrupts = <0 46 0> - wakup_eint: wakeup-interrupt-controller { + /* ... */ + + wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>, - <0 32 0>; + interrupts = <0 32 0>; }; }; @@ -190,7 +258,8 @@ Example 4: Set up the default pin state for uart controller. static int s3c24xx_serial_probe(struct platform_device *pdev) { struct pinctrl *pinctrl; - ... - ... + + /* ... */ + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); } diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt index ca8fa56e9f03..707c1a2dae06 100644 --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -1,5 +1,7 @@ AM33XX MUSB GLUE - compatible : Should be "ti,musb-am33xx" + - reg : offset and length of register sets, first usbss, then for musb instances + - interrupts : usbss, musb instance interrupts in order - ti,hwmods : must be "usb_otg_hs" - multipoint : Should be "1" indicating the musb controller supports multipoint. This is a MUSB configuration-specific setting. @@ -12,3 +14,22 @@ AM33XX MUSB GLUE represents PERIPHERAL. - power : Should be "250". This signifies the controller can supply upto 500mA when operating in host mode. + +Example: + +usb@47400000 { + compatible = "ti,musb-am33xx"; + reg = <0x47400000 0x1000 /* usbss */ + 0x47401000 0x800 /* musb instance 0 */ + 0x47401800 0x800>; /* musb instance 1 */ + interrupts = <17 /* usbss */ + 18 /* musb instance 0 */ + 19>; /* musb instance 1 */ + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + port0-mode = <3>; + port1-mode = <3>; + power = <250>; + ti,hwmods = "usb_otg_hs"; +}; diff --git a/Documentation/devicetree/bindings/usb/ehci-orion.txt b/Documentation/devicetree/bindings/usb/ehci-orion.txt new file mode 100644 index 000000000000..6bc09ec14c4d --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ehci-orion.txt @@ -0,0 +1,15 @@ +* EHCI controller, Orion Marvell variants + +Required properties: +- compatible: must be "marvell,orion-ehci" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The EHCI interrupt + +Example: + + ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <19>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 9de2b9ff9d6e..ac2c2c416a14 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -51,4 +51,5 @@ ti Texas Instruments via VIA Technologies, Inc. wlf Wolfson Microelectronics wm Wondermedia Technologies, Inc. +winbond Winbond Electronics corp. xlnx Xilinx diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt new file mode 100644 index 000000000000..2957ebb5aa71 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt @@ -0,0 +1,15 @@ +* Atmel Watchdog Timers + +** at91sam9-wdt + +Required properties: +- compatible: must be "atmel,at91sam9260-wdt". +- reg: physical base address of the controller and length of memory mapped + region. + +Example: + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + }; diff --git a/Documentation/networking/vxlan.txt b/Documentation/networking/vxlan.txt index 5b34b762d7d5..6d993510f091 100644 --- a/Documentation/networking/vxlan.txt +++ b/Documentation/networking/vxlan.txt @@ -32,7 +32,7 @@ no entry is in the forwarding table. # ip link delete vxlan0 3. Show vxlan info - # ip -d show vxlan0 + # ip -d link show vxlan0 It is possible to create, destroy and display the vxlan forwarding table using the new bridge command. @@ -41,7 +41,7 @@ forwarding table using the new bridge command. # bridge fdb add to 00:17:42:8a:b4:05 dst 192.19.0.2 dev vxlan0 2. Delete forwarding table entry - # bridge fdb delete 00:17:42:8a:b4:05 + # bridge fdb delete 00:17:42:8a:b4:05 dev vxlan0 3. Show forwarding table # bridge fdb show dev vxlan0 diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 3b4ee5328868..a1cd2f9428d7 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -1193,4 +1193,6 @@ foo_switch() ... } -The above has to be done from process context. +The above has to be done from process context. The reservation of the pins +will be done when the state is activated, so in effect one specific pin +can be used by different functions at different times on a running system. diff --git a/MAINTAINERS b/MAINTAINERS index bb0b27db673f..140ebd063f1b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -526,17 +526,17 @@ F: drivers/video/geode/ F: arch/x86/include/asm/geode.h AMD IOMMU (AMD-VI) -M: Joerg Roedel <joerg.roedel@amd.com> +M: Joerg Roedel <joro@8bytes.org> L: iommu@lists.linux-foundation.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git -S: Supported +S: Maintained F: drivers/iommu/amd_iommu*.[ch] F: include/linux/amd-iommu.h AMD MICROCODE UPDATE SUPPORT -M: Andreas Herrmann <andreas.herrmann3@amd.com> +M: Andreas Herrmann <herrmann.der.user@googlemail.com> L: amd64-microcode@amd64.org -S: Supported +S: Maintained F: arch/x86/kernel/microcode_amd.c AMS (Apple Motion Sensor) DRIVER @@ -797,7 +797,6 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained T: git git://git.pengutronix.de/git/imx/linux-2.6.git F: arch/arm/mach-imx/ -F: arch/arm/plat-mxc/ F: arch/arm/configs/imx*_defconfig ARM/FREESCALE IMX6 @@ -841,6 +840,14 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git F: arch/arm/mach-sa1100/jornada720.c F: arch/arm/mach-sa1100/include/mach/jornada720.h +ARM/IGEP MACHINE SUPPORT +M: Enric Balletbo i Serra <eballetbo@gmail.com> +M: Javier Martinez Canillas <javier@dowhile0.org> +L: linux-omap@vger.kernel.org +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-omap2/board-igep0020.c + ARM/INCOME PXA270 SUPPORT M: Marek Vasut <marek.vasut@gmail.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -2708,10 +2715,10 @@ F: include/linux/edac.h EDAC-AMD64 M: Doug Thompson <dougthompson@xmission.com> -M: Borislav Petkov <borislav.petkov@amd.com> +M: Borislav Petkov <bp@alien8.de> L: linux-edac@vger.kernel.org W: bluesmoke.sourceforge.net -S: Supported +S: Maintained F: drivers/edac/amd64_edac* EDAC-E752X @@ -3753,7 +3760,7 @@ S: Maintained F: drivers/platform/x86/ideapad-laptop.c IDE/ATAPI DRIVERS -M: Borislav Petkov <petkovbb@gmail.com> +M: Borislav Petkov <bp@alien8.de> L: linux-ide@vger.kernel.org S: Maintained F: Documentation/cdrom/ide-cd @@ -4280,8 +4287,8 @@ F: include/linux/lockd/ F: include/linux/sunrpc/ KERNEL VIRTUAL MACHINE (KVM) -M: Avi Kivity <avi@redhat.com> M: Marcelo Tosatti <mtosatti@redhat.com> +M: Gleb Natapov <gleb@redhat.com> L: kvm@vger.kernel.org W: http://kvm.qumranet.com S: Supported @@ -5413,7 +5420,7 @@ S: Maintained F: sound/drivers/opl4/ OPROFILE -M: Robert Richter <robert.richter@amd.com> +M: Robert Richter <rric@kernel.org> L: oprofile-list@lists.sf.net S: Maintained F: arch/*/include/asm/oprofile*.h @@ -8198,7 +8205,7 @@ F: drivers/platform/x86 X86 MCE INFRASTRUCTURE M: Tony Luck <tony.luck@intel.com> -M: Borislav Petkov <bp@amd64.org> +M: Borislav Petkov <bp@alien8.de> L: linux-edac@vger.kernel.org S: Maintained F: arch/x86/kernel/cpu/mcheck/* @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Terrified Chipmunk # *DOCUMENTATION* diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 1e6956a90608..14db93e4c8a8 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -445,7 +445,7 @@ struct procfs_args { * unhappy with OSF UFS. [CHECKME] */ static int -osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags) +osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags) { int retval; struct cdfs_args tmp; @@ -465,7 +465,7 @@ osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags) } static int -osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags) +osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags) { int retval; struct cdfs_args tmp; @@ -485,7 +485,7 @@ osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags) } static int -osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags) +osf_procfs_mount(const char *dirname, struct procfs_args __user *args, int flags) { struct procfs_args tmp; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ade7e924bef5..a920f2c422e9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -433,19 +433,6 @@ config ARCH_FOOTBRIDGE Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. -config ARCH_MXC - bool "Freescale MXC/iMX-based" - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS - select GENERIC_IRQ_CHIP - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - select USE_OF - help - Support for Freescale MXC/iMX-based family of processors - config ARCH_MXS bool "Freescale MXS-based" select ARCH_REQUIRE_GPIOLIB @@ -536,6 +523,8 @@ config ARCH_DOVE select CPU_V7 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI + select PINCTRL + select PINCTRL_DOVE select PLAT_ORION_LEGACY select USB_ARCH_HAS_EHCI help @@ -547,6 +536,8 @@ config ARCH_KIRKWOOD select CPU_FEROCEON select GENERIC_CLOCKEVENTS select PCI + select PINCTRL + select PINCTRL_KIRKWOOD select PLAT_ORION_LEGACY help Support for the following Marvell Kirkwood series SoCs: @@ -924,6 +915,7 @@ config ARCH_DAVINCI select GENERIC_IRQ_CHIP select HAVE_IDE select NEED_MACH_GPIO_H + select USE_OF select ZONE_DMA help Support for TI's DaVinci platform. @@ -937,7 +929,6 @@ config ARCH_OMAP select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select HAVE_CLK - select NEED_MACH_GPIO_H help Support for TI's OMAP platform (OMAP1/2/3/4). @@ -959,7 +950,7 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" select ARM_AMBA select ARM_GIC - select CLKDEV_LOOKUP + select COMMON_CLK select CPU_V7 select GENERIC_CLOCKEVENTS select ICST @@ -1058,7 +1049,7 @@ source "arch/arm/mach-msm/Kconfig" source "arch/arm/mach-mv78xx0/Kconfig" -source "arch/arm/plat-mxc/Kconfig" +source "arch/arm/mach-imx/Kconfig" source "arch/arm/mach-mxs/Kconfig" @@ -1168,7 +1159,7 @@ config ARM_NR_BANKS config IWMMXT bool "Enable iWMMXt support" depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 - default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP + default y if PXA27x || PXA3xx || ARCH_MMP help Enable support for iWMMXt context switching at run time if running on a CPU that supports it. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index b0f3857b3a4c..00e9a53888ba 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -132,6 +132,23 @@ choice their output to UART1 serial port on DaVinci TNETV107X devices. + config DEBUG_ZYNQ_UART0 + bool "Kernel low-level debugging on Xilinx Zynq using UART0" + depends on ARCH_ZYNQ + help + Say Y here if you want the debug print routines to direct + their output to UART0 on the Zynq platform. + + config DEBUG_ZYNQ_UART1 + bool "Kernel low-level debugging on Xilinx Zynq using UART1" + depends on ARCH_ZYNQ + help + Say Y here if you want the debug print routines to direct + their output to UART1 on the Zynq platform. + + If you have a ZC702 board and want early boot messages to + appear on the USB serial adaptor, select this option. + config DEBUG_DC21285_PORT bool "Kernel low-level debugging messages via footbridge serial port" depends on FOOTBRIDGE @@ -209,20 +226,12 @@ choice Say Y here if you want kernel low-level debugging support on i.MX50 or i.MX53. - config DEBUG_IMX6Q_UART2 - bool "i.MX6Q Debug UART2" + config DEBUG_IMX6Q_UART + bool "i.MX6Q Debug UART" depends on SOC_IMX6Q help Say Y here if you want kernel low-level debugging support - on i.MX6Q UART2. This is correct for e.g. the SabreLite - board. - - config DEBUG_IMX6Q_UART4 - bool "i.MX6Q Debug UART4" - depends on SOC_IMX6Q - help - Say Y here if you want kernel low-level debugging support - on i.MX6Q UART4. + on i.MX6Q. config DEBUG_MMP_UART2 bool "Kernel low-level debugging message via MMP UART2" @@ -409,9 +418,25 @@ choice endchoice +config DEBUG_IMX6Q_UART_PORT + int "i.MX6Q Debug UART Port (1-5)" if DEBUG_IMX6Q_UART + range 1 5 + default 1 + depends on SOC_IMX6Q + help + Choose UART port on which kernel low-level debug messages + should be output. + config DEBUG_LL_INCLUDE string default "debug/icedcc.S" if DEBUG_ICEDCC + default "debug/imx.S" if DEBUG_IMX1_UART || \ + DEBUG_IMX25_UART || \ + DEBUG_IMX21_IMX27_UART || \ + DEBUG_IMX31_IMX35_UART || \ + DEBUG_IMX51_UART || \ + DEBUG_IMX50_IMX53_UART ||\ + DEBUG_IMX6Q_UART default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/mvebu.S" if DEBUG_MVEBU_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 5f914fca911b..97252d86a701 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -196,10 +196,8 @@ machine-$(CONFIG_ARCH_ZYNQ) += zynq # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. -plat-$(CONFIG_ARCH_MXC) += mxc plat-$(CONFIG_ARCH_OMAP) += omap plat-$(CONFIG_ARCH_S3C64XX) += samsung -plat-$(CONFIG_ARCH_ZYNQ) += versatile plat-$(CONFIG_PLAT_IOP) += iop plat-$(CONFIG_PLAT_NOMADIK) += nomadik plat-$(CONFIG_PLAT_ORION) += orion diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index a517153a13ea..537208f22e56 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -54,10 +54,6 @@ ifeq ($(CONFIG_ARCH_SA1100),y) OBJS += head-sa1100.o endif -ifeq ($(CONFIG_ARCH_VT8500),y) -OBJS += head-vt8500.o -endif - ifeq ($(CONFIG_CPU_XSCALE),y) OBJS += head-xscale.o endif diff --git a/arch/arm/boot/compressed/head-vt8500.S b/arch/arm/boot/compressed/head-vt8500.S deleted file mode 100644 index 1dc1e21a3be3..000000000000 --- a/arch/arm/boot/compressed/head-vt8500.S +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/arch/arm/boot/compressed/head-vt8500.S - * - * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * VIA VT8500 specific tweaks. This is merged into head.S by the linker. - * - */ - -#include <linux/linkage.h> -#include <asm/mach-types.h> - - .section ".start", "ax" - -__VT8500_start: - @ Compare the SCC ID register against a list of known values - ldr r1, .SCCID - ldr r3, [r1] - - @ VT8500 override - ldr r4, .VT8500SCC - cmp r3, r4 - ldreq r7, .ID_BV07 - beq .Lendvt8500 - - @ WM8505 override - ldr r4, .WM8505SCC - cmp r3, r4 - ldreq r7, .ID_8505 - beq .Lendvt8500 - - @ Otherwise, leave the bootloader's machine id untouched - -.SCCID: - .word 0xd8120000 -.VT8500SCC: - .word 0x34000102 -.WM8505SCC: - .word 0x34260103 - -.ID_BV07: - .word MACH_TYPE_BV07 -.ID_8505: - .word MACH_TYPE_WM8505_7IN_NETBOOK - -.Lendvt8500: diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f37cf9fa5fa0..89dcc14f1931 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -17,13 +17,17 @@ dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \ usb_a9263.dtb \ usb_a9g20.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ + da850-evm.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ dove-dove-db.dtb dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ - exynos5250-smdk5250.dtb + exynos4412-smdk4412.dtb \ + exynos5250-smdk5250.dtb \ + exynos5250-snow.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb @@ -36,11 +40,20 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-ib62x0.dtb \ kirkwood-iconnect.dtb \ kirkwood-iomega_ix2_200.dtb \ + kirkwood-is2.dtb \ kirkwood-km_kirkwood.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ + kirkwood-mplcec4.dtb \ + kirkwood-ns2.dtb \ + kirkwood-ns2lite.dtb \ + kirkwood-ns2max.dtb \ + kirkwood-ns2mini.dtb \ + kirkwood-nsa310.dtb \ + kirkwood-topkick.dtb \ kirkwood-ts219-6281.dtb \ - kirkwood-ts219-6282.dtb + kirkwood-ts219-6282.dtb \ + kirkwood-openblocks_a6.dtb dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ @@ -51,30 +64,40 @@ dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \ imx53-qsb.dtb \ imx53-smd.dtb \ imx6q-arm2.dtb \ + imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx23-olinuxino.dtb \ imx23-stmp378x_devb.dtb \ + imx28-apf28.dtb \ + imx28-apf28dev.dtb \ imx28-apx4devkit.dtb \ imx28-cfa10036.dtb \ imx28-cfa10049.dtb \ imx28-evk.dtb \ imx28-m28evk.dtb \ + imx28-sps1.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ + omap3-beagle.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \ omap4-panda.dtb \ - omap4-pandaES.dtb \ - omap4-var_som.dtb \ + omap4-panda-es.dtb \ + omap4-var-som.dtb \ omap4-sdp.dtb \ omap5-evm.dtb \ am335x-evm.dtb \ + am335x-evmsk.dtb \ am335x-bone.dtb +dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb -dtb-$(CONFIG_ARCH_U8500) += snowball.dtb +dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ + hrefprev60.dtb \ + hrefv60plus.dtb \ + ccu9540.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ sh73a0-kzm9g.dtb @@ -103,5 +126,6 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb +dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb endif diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index c634f87e230e..2c338889df1b 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -13,11 +13,31 @@ model = "TI AM335x BeagleBone"; compatible = "ti,am335x-bone", "ti,am33xx"; + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; @@ -33,6 +53,36 @@ }; }; + + leds { + compatible = "gpio-leds"; + + led@2 { + label = "beaglebone:green:heartbeat"; + gpios = <&gpio2 21 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@3 { + label = "beaglebone:green:mmc0"; + gpios = <&gpio2 22 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio2 23 0>; + default-state = "off"; + }; + + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio2 24 0>; + default-state = "off"; + }; + }; }; /include/ "tps65217.dtsi" diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 185d6325a458..9f65f17ebdf8 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -13,11 +13,39 @@ model = "TI AM335x EVM"; compatible = "ti,am335x-evm", "ti,am33xx"; + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>; + + matrix_keypad_s0: matrix_keypad_s0 { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x7 /* gpmc_a6.gpio1_22, OUTPUT | MODE7 */ + 0x64 0x27 /* gpmc_a9.gpio1_25, INPUT | MODE7 */ + 0x68 0x27 /* gpmc_a10.gpio1_26, INPUT | MODE7 */ + 0x6c 0x27 /* gpmc_a11.gpio1_27, INPUT | MODE7 */ + >; + }; + + volume_keys_s0: volume_keys_s0 { + pinctrl-single,pins = < + 0x150 0x27 /* spi0_sclk.gpio0_2, INPUT | MODE7 */ + 0x154 0x27 /* spi0_d0.gpio0_3, INPUT | MODE7 */ + >; + }; + }; + ocp { uart1: serial@44e09000 { status = "okay"; @@ -31,6 +59,49 @@ reg = <0x2d>; }; }; + + i2c2: i2c@4802a000 { + status = "okay"; + clock-frequency = <100000>; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + + tsl2550: tsl2550@39 { + compatible = "taos,tsl2550"; + reg = <0x39>; + }; + + tmp275: tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + }; }; vbat: fixedregulator@0 { @@ -40,6 +111,53 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; + + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <2>; + + row-gpios = <&gpio2 25 0 /* Bank1, pin25 */ + &gpio2 26 0 /* Bank1, pin26 */ + &gpio2 27 0>; /* Bank1, pin27 */ + + col-gpios = <&gpio2 21 0 /* Bank1, pin21 */ + &gpio2 22 0>; /* Bank1, pin22 */ + + linux,keymap = <0x0000008b /* MENU */ + 0x0100009e /* BACK */ + 0x02000069 /* LEFT */ + 0x0001006a /* RIGHT */ + 0x0101001c /* ENTER */ + 0x0201006c>; /* DOWN */ + }; + + gpio_keys: volume_keys@0 { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + switch@9 { + label = "volume-up"; + linux,code = <115>; + gpios = <&gpio1 2 1>; + gpio-key,wakeup; + }; + + switch@10 { + label = "volume-down"; + linux,code = <114>; + gpios = <&gpio1 3 1>; + gpio-key,wakeup; + }; + }; }; /include/ "tps65910.dtsi" diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts new file mode 100644 index 000000000000..f5a6162a4ff2 --- /dev/null +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -0,0 +1,250 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * AM335x Starter Kit + * http://www.ti.com/tool/tmdssk3358 + */ + +/dts-v1/; + +/include/ "am33xx.dtsi" + +/ { + model = "TI AM335x EVM-SK"; + compatible = "ti,am335x-evmsk", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>; + + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x10 0x7 /* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */ + 0x14 0x7 /* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */ + 0x18 0x7 /* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */ + 0x1c 0x7 /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */ + >; + }; + + gpio_keys_s0: gpio_keys_s0 { + pinctrl-single,pins = < + 0x94 0x27 /* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */ + 0x90 0x27 /* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */ + 0x70 0x27 /* gpmc_wait0.gpio0_30, INPUT | MODE7 */ + 0x9c 0x27 /* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */ + >; + }; + }; + + ocp { + uart1: serial@44e09000 { + status = "okay"; + }; + + i2c1: i2c@44e0b000 { + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + }; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + + led@1 { + label = "evmsk:green:usr0"; + gpios = <&gpio2 4 0>; + default-state = "off"; + }; + + led@2 { + label = "evmsk:green:usr1"; + gpios = <&gpio2 5 0>; + default-state = "off"; + }; + + led@3 { + label = "evmsk:green:mmc0"; + gpios = <&gpio2 6 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@4 { + label = "evmsk:green:heartbeat"; + gpios = <&gpio2 7 0>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + gpio_buttons: gpio_buttons@0 { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + switch@1 { + label = "button0"; + linux,code = <0x100>; + gpios = <&gpio3 3 0>; + }; + + switch@2 { + label = "button1"; + linux,code = <0x101>; + gpios = <&gpio3 2 0>; + }; + + switch@3 { + label = "button2"; + linux,code = <0x102>; + gpios = <&gpio1 30 0>; + gpio-key,wakeup; + }; + + switch@4 { + label = "button3"; + linux,code = <0x103>; + gpios = <&gpio3 5 0>; + }; + }; +}; + +/include/ "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index bb31bff01998..20a3f29a6bfe 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,am33xx"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -25,6 +26,21 @@ cpus { cpu@0 { compatible = "arm,cortex-a8"; + + /* + * To consider voltage drop between PMIC and SoC, + * tolerance value is reduced to 2% from 4% and + * voltage value is increased as a precaution. + */ + operating-points = < + /* kHz uV */ + 720000 1285000 + 600000 1225000 + 500000 1125000 + 275000 1125000 + >; + voltage-tolerance = <2>; /* 2 percentage */ + clock-latency = <300000>; /* From omap-cpufreq driver */ }; }; @@ -40,6 +56,15 @@ }; }; + am33xx_pinmux: pinmux@44e10800 { + compatible = "pinctrl-single"; + reg = <0x44e10800 0x0238>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7f>; + }; + /* * XXX: Use a flat representation of the AM33XX interconnect. * The real AM33XX interconnect network is quite complex.Since @@ -70,7 +95,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x44e07000 0x1000>; - interrupt-parent = <&intc>; interrupts = <96>; }; @@ -82,7 +106,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x4804c000 0x1000>; - interrupt-parent = <&intc>; interrupts = <98>; }; @@ -94,7 +117,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x481ac000 0x1000>; - interrupt-parent = <&intc>; interrupts = <32>; }; @@ -106,7 +128,6 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x481ae000 0x1000>; - interrupt-parent = <&intc>; interrupts = <62>; }; @@ -115,7 +136,6 @@ ti,hwmods = "uart1"; clock-frequency = <48000000>; reg = <0x44e09000 0x2000>; - interrupt-parent = <&intc>; interrupts = <72>; status = "disabled"; }; @@ -125,7 +145,6 @@ ti,hwmods = "uart2"; clock-frequency = <48000000>; reg = <0x48022000 0x2000>; - interrupt-parent = <&intc>; interrupts = <73>; status = "disabled"; }; @@ -135,7 +154,6 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; reg = <0x48024000 0x2000>; - interrupt-parent = <&intc>; interrupts = <74>; status = "disabled"; }; @@ -145,7 +163,6 @@ ti,hwmods = "uart4"; clock-frequency = <48000000>; reg = <0x481a6000 0x2000>; - interrupt-parent = <&intc>; interrupts = <44>; status = "disabled"; }; @@ -155,7 +172,6 @@ ti,hwmods = "uart5"; clock-frequency = <48000000>; reg = <0x481a8000 0x2000>; - interrupt-parent = <&intc>; interrupts = <45>; status = "disabled"; }; @@ -165,7 +181,6 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; reg = <0x481aa000 0x2000>; - interrupt-parent = <&intc>; interrupts = <46>; status = "disabled"; }; @@ -176,7 +191,6 @@ #size-cells = <0>; ti,hwmods = "i2c1"; reg = <0x44e0b000 0x1000>; - interrupt-parent = <&intc>; interrupts = <70>; status = "disabled"; }; @@ -187,7 +201,6 @@ #size-cells = <0>; ti,hwmods = "i2c2"; reg = <0x4802a000 0x1000>; - interrupt-parent = <&intc>; interrupts = <71>; status = "disabled"; }; @@ -198,7 +211,6 @@ #size-cells = <0>; ti,hwmods = "i2c3"; reg = <0x4819c000 0x1000>; - interrupt-parent = <&intc>; interrupts = <30>; status = "disabled"; }; @@ -207,8 +219,124 @@ compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; reg = <0x44e35000 0x1000>; - interrupt-parent = <&intc>; interrupts = <91>; }; + + dcan0: d_can@481cc000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can0"; + reg = <0x481cc000 0x2000>; + interrupts = <52>; + status = "disabled"; + }; + + dcan1: d_can@481d0000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can1"; + reg = <0x481d0000 0x2000>; + interrupts = <55>; + status = "disabled"; + }; + + timer1: timer@44e31000 { + compatible = "ti,omap2-timer"; + reg = <0x44e31000 0x400>; + interrupts = <67>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48040000 { + compatible = "ti,omap2-timer"; + reg = <0x48040000 0x400>; + interrupts = <68>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48042000 { + compatible = "ti,omap2-timer"; + reg = <0x48042000 0x400>; + interrupts = <69>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48044000 { + compatible = "ti,omap2-timer"; + reg = <0x48044000 0x400>; + interrupts = <92>; + ti,hwmods = "timer4"; + ti,timer-pwm; + }; + + timer5: timer@48046000 { + compatible = "ti,omap2-timer"; + reg = <0x48046000 0x400>; + interrupts = <93>; + ti,hwmods = "timer5"; + ti,timer-pwm; + }; + + timer6: timer@48048000 { + compatible = "ti,omap2-timer"; + reg = <0x48048000 0x400>; + interrupts = <94>; + ti,hwmods = "timer6"; + ti,timer-pwm; + }; + + timer7: timer@4804a000 { + compatible = "ti,omap2-timer"; + reg = <0x4804a000 0x400>; + interrupts = <95>; + ti,hwmods = "timer7"; + ti,timer-pwm; + }; + + rtc@44e3e000 { + compatible = "ti,da830-rtc"; + reg = <0x44e3e000 0x1000>; + interrupts = <75 + 76>; + ti,hwmods = "rtc"; + }; + + spi0: spi@48030000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x48030000 0x400>; + interrupt = <65>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi0"; + status = "disabled"; + }; + + spi1: spi@481a0000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x481a0000 0x400>; + interrupt = <125>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi1"; + status = "disabled"; + }; + + usb@47400000 { + compatible = "ti,musb-am33xx"; + reg = <0x47400000 0x1000 /* usbss */ + 0x47401000 0x800 /* musb instance 0 */ + 0x47401800 0x800>; /* musb instance 1 */ + interrupts = <17 /* usbss */ + 18 /* musb instance 0 */ + 19>; /* musb instance 1 */ + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + port0-mode = <3>; + port1-mode = <3>; + power = <250>; + ti,hwmods = "usb_otg_hs"; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index d410581a5a85..bfb5bb6528b5 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -246,6 +246,12 @@ trigger-external; }; }; + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 3e6e5c1abbf3..ff5461278c03 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -195,6 +195,12 @@ #size-cells = <0>; status = "disabled"; }; + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 3add030d61f8..a98c00a234eb 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -262,6 +262,12 @@ trigger-value = <0x6>; }; }; + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ccu9540.dts new file mode 100644 index 000000000000..04305463f00d --- /dev/null +++ b/arch/arm/boot/dts/ccu9540.dts @@ -0,0 +1,72 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "dbx5x0.dtsi" + +/ { + model = "ST-Ericsson CCU9540 platform with Device Tree"; + compatible = "st-ericsson,ccu9540", "st-ericsson,u9540"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + soc-u9500 { + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&gpio7 6 0x4>; // 230 + cd-inverted; + + status = "okay"; + }; + + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + + status = "okay"; + }; + + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi new file mode 100644 index 000000000000..fddd17417433 --- /dev/null +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -0,0 +1,184 @@ +/* + * Common device tree include for all Exynos 5250 boards based off of Daisy. + * + * Copyright (c) 2012 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + aliases { + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + }; + + i2c@12C60000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + gpios = <&gpb3 0 2 3 0>, + <&gpb3 1 2 3 0>; + }; + + i2c@12C70000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + gpios = <&gpb3 2 2 3 0>, + <&gpb3 3 2 3 0>; + }; + + i2c@12C80000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + /* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ + gpios = <&gpa0 6 3 0 0>, + <&gpa0 7 3 0 0>; + + hdmiddc@50 { + compatible = "samsung,exynos5-hdmiddc"; + reg = <0x50>; + }; + }; + + i2c@12C90000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + gpios = <&gpa1 2 3 3 0>, + <&gpa1 3 3 3 0>; + }; + + i2c@12CA0000 { + status = "disabled"; + }; + + i2c@12CB0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + gpios = <&gpa2 2 3 3 0>, + <&gpa2 3 3 3 0>; + }; + + i2c@12CC0000 { + status = "disabled"; + }; + + i2c@12CD0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + gpios = <&gpb2 2 3 3 0>, + <&gpb2 3 3 3 0>; + }; + + i2c@12CE0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + hdmiphy@38 { + compatible = "samsung,exynos5-hdmiphy"; + reg = <0x38>; + }; + }; + + dwmmc0@12200000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; + + slot@0 { + reg = <0>; + bus-width = <8>; + gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, + <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, + <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, + <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, + <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; + }; + }; + + dwmmc1@12210000 { + status = "disabled"; + }; + + dwmmc2@12220000 { + num-slots = <1>; + supports-highspeed; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; + + slot@0 { + reg = <0>; + bus-width = <4>; + samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>; + wp-gpios = <&gpc2 1 0 0 3>; + gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>, + <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>, + <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>; + }; + }; + + dwmmc3@12230000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; + + slot@0 { + reg = <0>; + bus-width = <4>; + /* See board-specific dts files for GPIOs */ + }; + }; + + spi_0: spi@12d20000 { + status = "disabled"; + }; + + spi_1: spi@12d30000 { + gpios = <&gpa2 4 2 3 0>, + <&gpa2 6 2 3 0>, + <&gpa2 7 2 3 0>; + samsung,spi-src-clk = <0>; + num-cs = <1>; + }; + + spi_2: spi@12d40000 { + status = "disabled"; + }; + + hdmi { + hpd-gpio = <&gpx3 7 0xf 1 3>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpx1 3 0 0x10000 0>; + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts new file mode 100644 index 000000000000..422fdb3fcfc1 --- /dev/null +++ b/arch/arm/boot/dts/da850-enbw-cmc.dts @@ -0,0 +1,30 @@ +/* + * Device Tree for AM1808 EnBW CMC board + * + * Copyright 2012 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +/dts-v1/; +/include/ "da850.dtsi" + +/ { + compatible = "enbw,cmc", "ti,da850"; + model = "EnBW CMC"; + + soc { + serial0: serial@1c42000 { + status = "okay"; + }; + serial1: serial@1d0c000 { + status = "okay"; + }; + serial2: serial@1d0d000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts new file mode 100644 index 000000000000..37dc5a3243b8 --- /dev/null +++ b/arch/arm/boot/dts/da850-evm.dts @@ -0,0 +1,28 @@ +/* + * Device Tree for DA850 EVM board + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, version 2. + */ +/dts-v1/; +/include/ "da850.dtsi" + +/ { + compatible = "ti,da850-evm", "ti,da850"; + model = "DA850/AM1808/OMAP-L138 EVM"; + + soc { + serial0: serial@1c42000 { + status = "okay"; + }; + serial1: serial@1d0c000 { + status = "okay"; + }; + serial2: serial@1d0d000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi new file mode 100644 index 000000000000..640ab75c20db --- /dev/null +++ b/arch/arm/boot/dts/da850.dtsi @@ -0,0 +1,60 @@ +/* + * Copyright 2012 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +/include/ "skeleton.dtsi" + +/ { + arm { + #address-cells = <1>; + #size-cells = <1>; + ranges; + intc: interrupt-controller { + compatible = "ti,cp-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <100>; + reg = <0xfffee000 0x2000>; + }; + }; + soc { + compatible = "simple-bus"; + model = "da850"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x01c00000 0x400000>; + + serial0: serial@1c42000 { + compatible = "ns16550a"; + reg = <0x42000 0x100>; + clock-frequency = <150000000>; + reg-shift = <2>; + interrupts = <25>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + serial1: serial@1d0c000 { + compatible = "ns16550a"; + reg = <0x10c000 0x100>; + clock-frequency = <150000000>; + reg-shift = <2>; + interrupts = <53>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + serial2: serial@1d0d000 { + compatible = "ns16550a"; + reg = <0x10d000 0x100>; + clock-frequency = <150000000>; + reg-shift = <2>; + interrupts = <61>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 4b0e0ca08f40..9f553630242a 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -209,123 +209,103 @@ // DB8500_REGULATOR_VAPE db8500_vape_reg: db8500_vape { regulator-compatible = "db8500_vape"; - regulator-name = "db8500-vape"; regulator-always-on; }; // DB8500_REGULATOR_VARM db8500_varm_reg: db8500_varm { regulator-compatible = "db8500_varm"; - regulator-name = "db8500-varm"; }; // DB8500_REGULATOR_VMODEM db8500_vmodem_reg: db8500_vmodem { regulator-compatible = "db8500_vmodem"; - regulator-name = "db8500-vmodem"; }; // DB8500_REGULATOR_VPLL db8500_vpll_reg: db8500_vpll { regulator-compatible = "db8500_vpll"; - regulator-name = "db8500-vpll"; }; // DB8500_REGULATOR_VSMPS1 db8500_vsmps1_reg: db8500_vsmps1 { regulator-compatible = "db8500_vsmps1"; - regulator-name = "db8500-vsmps1"; }; // DB8500_REGULATOR_VSMPS2 db8500_vsmps2_reg: db8500_vsmps2 { regulator-compatible = "db8500_vsmps2"; - regulator-name = "db8500-vsmps2"; }; // DB8500_REGULATOR_VSMPS3 db8500_vsmps3_reg: db8500_vsmps3 { regulator-compatible = "db8500_vsmps3"; - regulator-name = "db8500-vsmps3"; }; // DB8500_REGULATOR_VRF1 db8500_vrf1_reg: db8500_vrf1 { regulator-compatible = "db8500_vrf1"; - regulator-name = "db8500-vrf1"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSP db8500_sva_mmdsp_reg: db8500_sva_mmdsp { regulator-compatible = "db8500_sva_mmdsp"; - regulator-name = "db8500-sva-mmdsp"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSPRET db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { regulator-compatible = "db8500_sva_mmdsp_ret"; - regulator-name = "db8500-sva-mmdsp-ret"; }; // DB8500_REGULATOR_SWITCH_SVAPIPE db8500_sva_pipe_reg: db8500_sva_pipe { regulator-compatible = "db8500_sva_pipe"; - regulator-name = "db8500_sva_pipe"; }; // DB8500_REGULATOR_SWITCH_SIAMMDSP db8500_sia_mmdsp_reg: db8500_sia_mmdsp { regulator-compatible = "db8500_sia_mmdsp"; - regulator-name = "db8500_sia_mmdsp"; }; // DB8500_REGULATOR_SWITCH_SIAMMDSPRET db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { - regulator-name = "db8500-sia-mmdsp-ret"; }; // DB8500_REGULATOR_SWITCH_SIAPIPE db8500_sia_pipe_reg: db8500_sia_pipe { regulator-compatible = "db8500_sia_pipe"; - regulator-name = "db8500-sia-pipe"; }; // DB8500_REGULATOR_SWITCH_SGA db8500_sga_reg: db8500_sga { regulator-compatible = "db8500_sga"; - regulator-name = "db8500-sga"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_B2R2_MCDE db8500_b2r2_mcde_reg: db8500_b2r2_mcde { regulator-compatible = "db8500_b2r2_mcde"; - regulator-name = "db8500-b2r2-mcde"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_ESRAM12 db8500_esram12_reg: db8500_esram12 { regulator-compatible = "db8500_esram12"; - regulator-name = "db8500-esram12"; }; // DB8500_REGULATOR_SWITCH_ESRAM12RET db8500_esram12_ret_reg: db8500_esram12_ret { regulator-compatible = "db8500_esram12_ret"; - regulator-name = "db8500-esram12-ret"; }; // DB8500_REGULATOR_SWITCH_ESRAM34 db8500_esram34_reg: db8500_esram34 { regulator-compatible = "db8500_esram34"; - regulator-name = "db8500-esram34"; }; // DB8500_REGULATOR_SWITCH_ESRAM34RET db8500_esram34_ret_reg: db8500_esram34_ret { regulator-compatible = "db8500_esram34_ret"; - regulator-name = "db8500-esram34-ret"; }; }; @@ -404,7 +384,6 @@ // supplies to the display/camera ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-compatible = "ab8500_ldo_aux1"; - regulator-name = "V-DISPLAY"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2900000>; regulator-boot-on; @@ -415,7 +394,6 @@ // supplies to the on-board eMMC ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { regulator-compatible = "ab8500_ldo_aux2"; - regulator-name = "V-eMMC1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; }; @@ -423,7 +401,6 @@ // supply for VAUX3; SDcard slots ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { regulator-compatible = "ab8500_ldo_aux3"; - regulator-name = "V-MMC-SD"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; }; @@ -431,49 +408,41 @@ // supply for v-intcore12; VINTCORE12 LDO ab8500_ldo_initcore_reg: ab8500_ldo_initcore { regulator-compatible = "ab8500_ldo_initcore"; - regulator-name = "V-INTCORE"; }; // supply for tvout; gpadc; TVOUT LDO ab8500_ldo_tvout_reg: ab8500_ldo_tvout { regulator-compatible = "ab8500_ldo_tvout"; - regulator-name = "V-TVOUT"; }; // supply for ab8500-usb; USB LDO ab8500_ldo_usb_reg: ab8500_ldo_usb { regulator-compatible = "ab8500_ldo_usb"; - regulator-name = "dummy"; }; // supply for ab8500-vaudio; VAUDIO LDO ab8500_ldo_audio_reg: ab8500_ldo_audio { regulator-compatible = "ab8500_ldo_audio"; - regulator-name = "V-AUD"; }; // supply for v-anamic1 VAMic1-LDO ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { regulator-compatible = "ab8500_ldo_anamic1"; - regulator-name = "V-AMIC1"; }; // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { regulator-compatible = "ab8500_ldo_amamic2"; - regulator-name = "V-AMIC2"; }; // supply for v-dmic; VDMIC LDO ab8500_ldo_dmic_reg: ab8500_ldo_dmic { regulator-compatible = "ab8500_ldo_dmic"; - regulator-name = "V-DMIC"; }; // supply for U8500 CSI/DSI; VANA LDO ab8500_ldo_ana_reg: ab8500_ldo_ana { regulator-compatible = "ab8500_ldo_ana"; - regulator-name = "V-CSI/DSI"; }; }; }; @@ -577,42 +546,42 @@ status = "disabled"; }; - sdi@80126000 { + sdi0_per1@80126000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80126000 0x1000>; interrupts = <0 60 0x4>; status = "disabled"; }; - sdi@80118000 { + sdi1_per2@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; interrupts = <0 50 0x4>; status = "disabled"; }; - sdi@80005000 { + sdi2_per3@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; interrupts = <0 41 0x4>; status = "disabled"; }; - sdi@80119000 { + sdi3_per2@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; interrupts = <0 59 0x4>; status = "disabled"; }; - sdi@80114000 { + sdi4_per2@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; interrupts = <0 99 0x4>; status = "disabled"; }; - sdi@80008000 { + sdi5_per3@80008000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80008000 0x1000>; interrupts = <0 100 0x4>; @@ -660,5 +629,19 @@ ranges = <0 0x50000000 0x4000000>; status = "disabled"; }; + + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + states = <1800000 0x1 + 2900000 0x0>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 0adbd5a38095..fed7d3f9f431 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -40,3 +40,13 @@ reg = <0>; }; }; + +&pinctrl { + pinctrl-0 = <&pmx_gpio_18>; + pinctrl-names = "default"; + + pmx_gpio_18: pmx-gpio-18 { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 5a00022383e7..61f391412a5a 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -4,6 +4,12 @@ compatible = "marvell,dove"; model = "Marvell Armada 88AP510 SoC"; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + soc@f1000000 { compatible = "simple-bus"; #address-cells = <1>; @@ -72,7 +78,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0xd0400 0x20>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; interrupts = <12>, <13>, <14>, <60>; }; @@ -81,7 +88,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0xd0420 0x20>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; interrupts = <61>; }; @@ -90,7 +98,12 @@ #gpio-cells = <2>; gpio-controller; reg = <0xe8400 0x0c>; - ngpio = <8>; + ngpios = <8>; + }; + + pinctrl: pinctrl@d0200 { + compatible = "marvell,dove-pinctrl"; + reg = <0xd0200 0x10>; }; spi0: spi@10600 { diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts index b7354e6506de..96e50f569433 100644 --- a/arch/arm/boot/dts/evk-pro3.dts +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -22,10 +22,22 @@ status = "okay"; }; + usart0: serial@fffb0000 { + status = "okay"; + }; + + usart2: serial@fffb8000 { + status = "okay"; + }; + usb1: gadget@fffa4000 { atmel,vbus-gpio = <&pioC 5 0>; status = "okay"; }; + + watchdog@fffffd40 { + status = "okay"; + }; }; usb0: ohci@00500000 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index a26c3dd58269..3428f1a94dcc 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -28,6 +28,44 @@ spi0 = &spi_0; spi1 = &spi_1; spi2 = &spi_2; + i2c0 = &i2c_0; + i2c1 = &i2c_1; + i2c2 = &i2c_2; + i2c3 = &i2c_3; + i2c4 = &i2c_4; + i2c5 = &i2c_5; + i2c6 = &i2c_6; + i2c7 = &i2c_7; + }; + + pd_mfc: mfc-power-domain@10023C40 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C40 0x20>; + }; + + pd_g3d: g3d-power-domain@10023C60 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C60 0x20>; + }; + + pd_lcd0: lcd0-power-domain@10023C80 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C80 0x20>; + }; + + pd_tv: tv-power-domain@10023C20 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C20 0x20>; + }; + + pd_cam: cam-power-domain@10023C00 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C00 0x20>; + }; + + pd_gps: gps-power-domain@10023CE0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CE0 0x20>; }; gic:interrupt-controller@10490000 { @@ -121,7 +159,7 @@ status = "disabled"; }; - i2c@13860000 { + i2c_0: i2c@13860000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -130,7 +168,7 @@ status = "disabled"; }; - i2c@13870000 { + i2c_1: i2c@13870000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -139,7 +177,7 @@ status = "disabled"; }; - i2c@13880000 { + i2c_2: i2c@13880000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -148,7 +186,7 @@ status = "disabled"; }; - i2c@13890000 { + i2c_3: i2c@13890000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -157,7 +195,7 @@ status = "disabled"; }; - i2c@138A0000 { + i2c_4: i2c@138A0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -166,7 +204,7 @@ status = "disabled"; }; - i2c@138B0000 { + i2c_5: i2c@138B0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -175,7 +213,7 @@ status = "disabled"; }; - i2c@138C0000 { + i2c_6: i2c@138C0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -184,7 +222,7 @@ status = "disabled"; }; - i2c@138D0000 { + i2c_7: i2c@138D0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 3e68f52e8454..f2710018e84e 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -22,38 +22,54 @@ compatible = "insignal,origen", "samsung,exynos4210"; memory { - reg = <0x40000000 0x40000000>; + reg = <0x40000000 0x10000000 + 0x50000000 0x10000000 + 0x60000000 0x10000000 + 0x70000000 0x10000000>; }; chosen { bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; + mmc_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 0>; + enable-active-high; + }; + sdhci@12530000 { - samsung,sdhci-bus-width = <4>; - linux,mmc_cap_4_bit_data; - samsung,sdhci-cd-internal; - gpio-cd = <&gpk2 2 2 3 3>; - gpios = <&gpk2 0 2 0 3>, - <&gpk2 1 2 0 3>, - <&gpk2 3 2 3 3>, - <&gpk2 4 2 3 3>, - <&gpk2 5 2 3 3>, - <&gpk2 6 2 3 3>; + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; status = "okay"; }; sdhci@12510000 { - samsung,sdhci-bus-width = <4>; - linux,mmc_cap_4_bit_data; - samsung,sdhci-cd-internal; - gpio-cd = <&gpk0 2 2 3 3>; - gpios = <&gpk0 0 2 0 3>, - <&gpk0 1 2 0 3>, - <&gpk0 3 2 3 3>, - <&gpk0 4 2 3 3>, - <&gpk0 5 2 3 3>, - <&gpk0 6 2 3 3>; + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { status = "okay"; }; @@ -64,35 +80,35 @@ up { label = "Up"; - gpios = <&gpx2 0 0 0x10000 2>; + gpios = <&gpx2 0 1>; linux,code = <103>; gpio-key,wakeup; }; down { label = "Down"; - gpios = <&gpx2 1 0 0x10000 2>; + gpios = <&gpx2 1 1>; linux,code = <108>; gpio-key,wakeup; }; back { label = "Back"; - gpios = <&gpx1 7 0 0x10000 2>; + gpios = <&gpx1 7 1>; linux,code = <158>; gpio-key,wakeup; }; home { label = "Home"; - gpios = <&gpx1 6 0 0x10000 2>; + gpios = <&gpx1 6 1>; linux,code = <102>; gpio-key,wakeup; }; menu { label = "Menu"; - gpios = <&gpx1 5 0 0x10000 2>; + gpios = <&gpx1 5 1>; linux,code = <139>; gpio-key,wakeup; }; @@ -101,7 +117,7 @@ leds { compatible = "gpio-leds"; status { - gpios = <&gpx1 3 0 0x10000 2>; + gpios = <&gpx1 3 1>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index b12cf272ad0d..55a2efb763d1 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -16,6 +16,134 @@ / { pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe2: gpe2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe3: gpe3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe4: gpe4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + uart0_data: uart0-data { samsung,pins = "gpa0-0", "gpa0-1"; samsung,pin-function = <0x2>; @@ -205,200 +333,345 @@ }; pinctrl@11000000 { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + sd0_clk: sd0-clk { samsung,pins = "gpk0-0"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd0_cmd: sd0-cmd { samsung,pins = "gpk0-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd0_cd: sd0-cd { samsung,pins = "gpk0-2"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd0_bus1: sd0-bus-width1 { samsung,pins = "gpk0-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd0_bus4: sd0-bus-width4 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd0_bus8: sd0-bus-width8 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_clk: sd4-clk { samsung,pins = "gpk0-0"; samsung,pin-function = <3>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_cmd: sd4-cmd { samsung,pins = "gpk0-1"; samsung,pin-function = <3>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_cd: sd4-cd { samsung,pins = "gpk0-2"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_bus1: sd4-bus-width1 { samsung,pins = "gpk0-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_bus4: sd4-bus-width4 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_bus8: sd4-bus-width8 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <3>; samsung,pin-pud = <4>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd1_clk: sd1-clk { samsung,pins = "gpk1-0"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd1_cmd: sd1-cmd { samsung,pins = "gpk1-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd1_cd: sd1-cd { samsung,pins = "gpk1-2"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd1_bus1: sd1-bus-width1 { samsung,pins = "gpk1-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd1_bus4: sd1-bus-width4 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_clk: sd2-clk { samsung,pins = "gpk2-0"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_cmd: sd2-cmd { samsung,pins = "gpk2-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_cd: sd2-cd { samsung,pins = "gpk2-2"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_bus1: sd2-bus-width1 { samsung,pins = "gpk2-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_bus4: sd2-bus-width4 { samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_bus8: sd2-bus-width8 { samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd3_clk: sd3-clk { samsung,pins = "gpk3-0"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd3_cmd: sd3-cmd { samsung,pins = "gpk3-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd3_cd: sd3-cd { samsung,pins = "gpk3-2"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd3_bus1: sd3-bus-width1 { samsung,pins = "gpk3-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd3_bus4: sd3-bus-width4 { samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; eint0: ext-int0 { @@ -438,6 +711,11 @@ }; pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + }; + i2s0_bus: i2s0-bus { samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", "gpz-4", "gpz-5", "gpz-6"; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 63610c3ba3af..9b23a8255e39 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -43,6 +43,22 @@ status = "okay"; }; + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + keypad@100A0000 { samsung,keypad-num-rows = <2>; samsung,keypad-num-columns = <8>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index a21511c14071..c346b64dff55 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -35,24 +35,15 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpk0 2 1 0 0>; + gpio = <&gpk0 2 0>; enable-active-high; }; sdhci_emmc: sdhci@12510000 { bus-width = <8>; non-removable; - broken-voltage; - gpios = <&gpk0 0 2 0 3>, - <&gpk0 1 2 0 3>, - <&gpk0 3 2 2 3>, - <&gpk0 4 2 2 3>, - <&gpk0 5 2 2 3>, - <&gpk0 6 2 2 3>, - <&gpk1 3 3 3 3>, - <&gpk1 4 3 3 3>, - <&gpk1 5 3 3 3>, - <&gpk1 6 3 3 3>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; + pinctrl-names = "default"; vmmc-supply = <&vemmc_reg>; status = "okay"; }; @@ -73,12 +64,74 @@ status = "okay"; }; + gpio-keys { + compatible = "gpio-keys"; + + vol-down-key { + gpios = <&gpx2 1 1>; + linux,code = <114>; + label = "volume down"; + debounce-interval = <10>; + }; + + vol-up-key { + gpios = <&gpx2 0 1>; + linux,code = <115>; + label = "volume up"; + debounce-interval = <10>; + }; + + power-key { + gpios = <&gpx2 7 1>; + linux,code = <116>; + label = "power"; + debounce-interval = <10>; + gpio-key,wakeup; + }; + + ok-key { + gpios = <&gpx3 5 1>; + linux,code = <352>; + label = "ok"; + debounce-interval = <10>; + }; + }; + + tsp_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "TSP_FIXED_VOLTAGES"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpl0 3 0>; + enable-active-high; + }; + + i2c@13890000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + mms114-touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpx0>; + interrupts = <4 2>; + x-size = <720>; + y-size = <1280>; + avdd-supply = <&tsp_reg>; + vdd-supply = <&tsp_reg>; + }; + }; + i2c@138B0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; samsung,i2c-max-bus-freq = <100000>; - gpios = <&gpb 6 3 3 0>, - <&gpb 7 3 3 0>; + pinctrl-0 = <&i2c5_bus>; + pinctrl-names = "default"; status = "okay"; max8997_pmic@66 { @@ -93,9 +146,9 @@ max8997,pmic-ignore-gpiodvs-side-effect; max8997,pmic-buck125-default-dvs-idx = <0>; - max8997,pmic-buck125-dvs-gpios = <&gpx0 5 1 0 0>, - <&gpx0 6 1 0 0>, - <&gpl0 0 1 0 0>; + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>, + <&gpx0 6 0>, + <&gpl0 0 0>; max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, <1250000>, <1200000>, diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 214c557eda7f..e31bfc4a6f09 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -31,6 +31,11 @@ pinctrl2 = &pinctrl_2; }; + pd_lcd1: lcd1-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + }; + gic:interrupt-controller@10490000 { cpu-offset = <0x8000>; }; @@ -46,27 +51,17 @@ compatible = "samsung,pinctrl-exynos4210"; reg = <0x11400000 0x1000>; interrupts = <0 47 0>; - interrupt-controller; - #interrupt-cells = <2>; }; pinctrl_1: pinctrl@11000000 { compatible = "samsung,pinctrl-exynos4210"; reg = <0x11000000 0x1000>; interrupts = <0 46 0>; - interrupt-controller; - #interrupt-cells = <2>; wakup_eint: wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>, - <0 32 0>; + interrupts = <0 32 0>; }; }; @@ -75,232 +70,10 @@ reg = <0x03860000 0x1000>; }; - gpio-controllers { - #address-cells = <1>; - #size-cells = <1>; - gpio-controller; - ranges; - - gpa0: gpio-controller@11400000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400000 0x20>; - #gpio-cells = <4>; - }; - - gpa1: gpio-controller@11400020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400020 0x20>; - #gpio-cells = <4>; - }; - - gpb: gpio-controller@11400040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400040 0x20>; - #gpio-cells = <4>; - }; - - gpc0: gpio-controller@11400060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400060 0x20>; - #gpio-cells = <4>; - }; - - gpc1: gpio-controller@11400080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400080 0x20>; - #gpio-cells = <4>; - }; - - gpd0: gpio-controller@114000A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000A0 0x20>; - #gpio-cells = <4>; - }; - - gpd1: gpio-controller@114000C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000C0 0x20>; - #gpio-cells = <4>; - }; - - gpe0: gpio-controller@114000E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000E0 0x20>; - #gpio-cells = <4>; - }; - - gpe1: gpio-controller@11400100 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400100 0x20>; - #gpio-cells = <4>; - }; - - gpe2: gpio-controller@11400120 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400120 0x20>; - #gpio-cells = <4>; - }; - - gpe3: gpio-controller@11400140 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400140 0x20>; - #gpio-cells = <4>; - }; - - gpe4: gpio-controller@11400160 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400160 0x20>; - #gpio-cells = <4>; - }; - - gpf0: gpio-controller@11400180 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400180 0x20>; - #gpio-cells = <4>; - }; - - gpf1: gpio-controller@114001A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001A0 0x20>; - #gpio-cells = <4>; - }; - - gpf2: gpio-controller@114001C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001C0 0x20>; - #gpio-cells = <4>; - }; - - gpf3: gpio-controller@114001E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001E0 0x20>; - #gpio-cells = <4>; - }; - - gpj0: gpio-controller@11000000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000000 0x20>; - #gpio-cells = <4>; - }; - - gpj1: gpio-controller@11000020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000020 0x20>; - #gpio-cells = <4>; - }; - - gpk0: gpio-controller@11000040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000040 0x20>; - #gpio-cells = <4>; - }; - - gpk1: gpio-controller@11000060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000060 0x20>; - #gpio-cells = <4>; - }; - - gpk2: gpio-controller@11000080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000080 0x20>; - #gpio-cells = <4>; - }; - - gpk3: gpio-controller@110000A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110000A0 0x20>; - #gpio-cells = <4>; - }; - - gpl0: gpio-controller@110000C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110000C0 0x20>; - #gpio-cells = <4>; - }; - - gpl1: gpio-controller@110000E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110000E0 0x20>; - #gpio-cells = <4>; - }; - - gpl2: gpio-controller@11000100 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000100 0x20>; - #gpio-cells = <4>; - }; - - gpy0: gpio-controller@11000120 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000120 0x20>; - #gpio-cells = <4>; - }; - - gpy1: gpio-controller@11000140 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000140 0x20>; - #gpio-cells = <4>; - }; - - gpy2: gpio-controller@11000160 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000160 0x20>; - #gpio-cells = <4>; - }; - - gpy3: gpio-controller@11000180 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000180 0x20>; - #gpio-cells = <4>; - }; - - gpy4: gpio-controller@110001A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110001A0 0x20>; - #gpio-cells = <4>; - }; - - gpy5: gpio-controller@110001C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110001C0 0x20>; - #gpio-cells = <4>; - }; - - gpy6: gpio-controller@110001E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110001E0 0x20>; - #gpio-cells = <4>; - }; - - gpx0: gpio-controller@11000C00 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C00 0x20>; - #gpio-cells = <4>; - }; - - gpx1: gpio-controller@11000C20 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C20 0x20>; - #gpio-cells = <4>; - }; - - gpx2: gpio-controller@11000C40 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C40 0x20>; - #gpio-cells = <4>; - }; - - gpx3: gpio-controller@11000C60 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C60 0x20>; - #gpio-cells = <4>; - }; - - gpz: gpio-controller@03860000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x03860000 0x20>; - #gpio-cells = <4>; - }; + tmu@100C0000 { + compatible = "samsung,exynos4210-tmu"; + interrupt-parent = <&combiner>; + reg = <0x100C0000 0x100>; + interrupts = <2 4>; }; }; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi new file mode 100644 index 000000000000..c6ae2005961f --- /dev/null +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -0,0 +1,28 @@ +/* + * Samsung's Exynos4212 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "exynos4x12.dtsi" + +/ { + compatible = "samsung,exynos4212"; + + gic:interrupt-controller@10490000 { + cpu-offset = <0x8000>; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts new file mode 100644 index 000000000000..f05bf575cc45 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -0,0 +1,45 @@ +/* + * Samsung's Exynos4412 based SMDK board device tree source + * + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's SMDK4412 board which is based on + * Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4412.dtsi" + +/ { + model = "Samsung SMDK evaluation board based on Exynos4412"; + compatible = "samsung,smdk4412", "samsung,exynos4412"; + + memory { + reg = <0x40000000 0x40000000>; + }; + + chosen { + bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi new file mode 100644 index 000000000000..d7dfe312772a --- /dev/null +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -0,0 +1,28 @@ +/* + * Samsung's Exynos4412 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "exynos4x12.dtsi" + +/ { + compatible = "samsung,exynos4412"; + + gic:interrupt-controller@10490000 { + cpu-offset = <0x4000>; + }; +}; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi new file mode 100644 index 000000000000..8e6115adcd97 --- /dev/null +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -0,0 +1,965 @@ +/* + * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart_audio_a: uart-audio-a { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart_audio_b: uart-audio-b { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ac97_bus: ac97-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpc1-3", "gpc1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4"; + samsung,pin-function = <5>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_ctrl: lcd-ctrl { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + mipi0_clk: mipi0-clk { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + mipi1_clk: mipi1-clk { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_clk: lcd-clk { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data16: lcd-data-width16 { + samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2", + "gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0", + "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data18: lcd-data-width18 { + samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1", + "gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1", + "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data24: lcd-data-width24 { + samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", + "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_ldi: lcd-ldi { + samsung,pins = "gpf3-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a: cam-port-a { + samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", + "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", + "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3", + "gpj1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@11000000 { + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm0: gpm0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm1: gpm1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm2: gpm2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm3: gpm3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm4: gpm4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd4_clk: sd4-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd4_cmd: sd4-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd4_cd: sd4-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd4_bus1: sd4-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd4_bus4: sd4-bus-width4 { + samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd4_bus8: sd4-bus-width8 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <4>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpk1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpk1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpk1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpk1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpk2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpk2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpk2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpk2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus8: sd2-bus-width8 { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_clk: sd3-clk { + samsung,pins = "gpk3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cmd: sd3-cmd { + samsung,pins = "gpk3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cd: sd3-cd { + samsung,pins = "gpk3-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_bus1: sd3-bus-width1 { + samsung,pins = "gpk3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + keypad_col0: keypad-col0 { + samsung,pins = "gpl2-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col1: keypad-col1 { + samsung,pins = "gpl2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col2: keypad-col2 { + samsung,pins = "gpl2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col3: keypad-col3 { + samsung,pins = "gpl2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col4: keypad-col4 { + samsung,pins = "gpl2-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col5: keypad-col5 { + samsung,pins = "gpl2-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col6: keypad-col6 { + samsung,pins = "gpl2-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col7: keypad-col7 { + samsung,pins = "gpl2-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_b: cam-port-b { + samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", + "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", + "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1", + "gpm2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + eint0: ext-int0 { + samsung,pins = "gpx0-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint8: ext-int8 { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint15: ext-int15 { + samsung,pins = "gpx1-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint16: ext-int16 { + samsung,pins = "gpx2-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint31: ext-int31 { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4", "gpz-5", "gpz-6"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm0_bus: pcm0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4"; + samsung,pin-function = <0x3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@106E0000 { + gpv0: gpv0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv1: gpv1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv2: gpv2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv3: gpv3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv4: gpv4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + c2c_bus: c2c-bus { + samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3", + "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7", + "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3", + "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7", + "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3", + "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7", + "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3", + "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7", + "gpv4-0", "gpv4-1"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi new file mode 100644 index 000000000000..179a62e46c9d --- /dev/null +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -0,0 +1,69 @@ +/* + * Samsung's Exynos4x12 SoCs device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "exynos4.dtsi" +/include/ "exynos4x12-pinctrl.dtsi" + +/ { + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + }; + + combiner:interrupt-controller@10440000 { + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,pinctrl-exynos4x12"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; + }; + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,pinctrl-exynos4x12"; + reg = <0x11000000 0x1000>; + interrupts = <0 46 0>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_2: pinctrl@03860000 { + compatible = "samsung,pinctrl-exynos4x12"; + reg = <0x03860000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 0>; + }; + + pinctrl_3: pinctrl@106E0000 { + compatible = "samsung,pinctrl-exynos4x12"; + reg = <0x106E0000 0x1000>; + interrupts = <0 72 0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index a352df403b7a..942d5761ca97 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -17,10 +17,6 @@ compatible = "samsung,smdk5250", "samsung,exynos5250"; aliases { - mshc0 = &dwmmc_0; - mshc1 = &dwmmc_1; - mshc2 = &dwmmc_2; - mshc3 = &dwmmc_3; }; memory { @@ -55,8 +51,31 @@ }; }; + i2c@121D0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <40000>; + samsung,i2c-slave-addr = <0x38>; + + sata-phy { + compatible = "samsung,sata-phy"; + reg = <0x38>; + }; + }; + + sata@122F0000 { + samsung,sata-freq = <66>; + }; + i2c@12C80000 { - status = "disabled"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + gpios = <&gpa0 6 3 3 0>, + <&gpa0 7 3 3 0>; + + hdmiddc@50 { + compatible = "samsung,exynos5-hdmiddc"; + reg = <0x50>; + }; }; i2c@12C90000 { @@ -79,7 +98,17 @@ status = "disabled"; }; - dwmmc_0: dwmmc0@12200000 { + i2c@12CE0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + hdmiphy@38 { + compatible = "samsung,exynos5-hdmiphy"; + reg = <0x38>; + }; + }; + + dwmmc0@12200000 { num-slots = <1>; supports-highspeed; broken-cd; @@ -100,11 +129,11 @@ }; }; - dwmmc_1: dwmmc1@12210000 { + dwmmc1@12210000 { status = "disabled"; }; - dwmmc_2: dwmmc2@12220000 { + dwmmc2@12220000 { num-slots = <1>; supports-highspeed; fifo-depth = <0x80>; @@ -125,7 +154,7 @@ }; }; - dwmmc_3: dwmmc3@12230000 { + dwmmc3@12230000 { status = "disabled"; }; @@ -166,4 +195,13 @@ spi_2: spi@12d40000 { status = "disabled"; }; + + hdmi { + hpd-gpio = <&gpx3 7 0xf 1 3>; + }; + + codec@11000000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts new file mode 100644 index 000000000000..17dd951c1cd2 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -0,0 +1,43 @@ +/* + * Google Snow board device tree source + * + * Copyright (c) 2012 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos5250.dtsi" +/include/ "cros5250-common.dtsi" + +/ { + model = "Google Snow"; + compatible = "google,snow", "samsung,exynos5250"; + + gpio-keys { + compatible = "gpio-keys"; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 5 0 0x10000 0>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; + + /* + * On Snow we've got SIP WiFi and so can keep drive strengths low to + * reduce EMI. + */ + dwmmc3@12230000 { + slot@0 { + gpios = <&gpc4 0 2 0 0>, <&gpc4 1 2 3 0>, + <&gpc4 3 2 3 0>, <&gpc4 4 2 3 0>, + <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index dddfd6e444dc..36d8246ea50e 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -31,6 +31,10 @@ gsc1 = &gsc_1; gsc2 = &gsc_2; gsc3 = &gsc_3; + mshc0 = &dwmmc_0; + mshc1 = &dwmmc_1; + mshc2 = &dwmmc_2; + mshc3 = &dwmmc_3; }; gic:interrupt-controller@10481000 { @@ -62,12 +66,24 @@ interrupts = <0 42 0>; }; + codec@11000000 { + compatible = "samsung,mfc-v6"; + reg = <0x11000000 0x10000>; + interrupts = <0 96 0>; + }; + rtc { compatible = "samsung,s3c6410-rtc"; reg = <0x101E0000 0x100>; interrupts = <0 43 0>, <0 44 0>; }; + tmu@10060000 { + compatible = "samsung,exynos5250-tmu"; + reg = <0x10060000 0x100>; + interrupts = <0 65 0>; + }; + serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; @@ -92,6 +108,17 @@ interrupts = <0 54 0>; }; + sata@122F0000 { + compatible = "samsung,exynos5-sata-ahci"; + reg = <0x122F0000 0x1ff>; + interrupts = <0 115 0>; + }; + + sata-phy@12170000 { + compatible = "samsung,exynos5-sata-phy"; + reg = <0x12170000 0x1ff>; + }; + i2c@12C60000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C60000 0x100>; @@ -156,6 +183,21 @@ #size-cells = <0>; }; + i2c@12CE0000 { + compatible = "samsung,s3c2440-hdmiphy-i2c"; + reg = <0x12CE0000 0x1000>; + interrupts = <0 64 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@121D0000 { + compatible = "samsung,exynos5-sata-phy-i2c"; + reg = <0x121D0000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + }; + spi_0: spi@12d20000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; @@ -186,7 +228,7 @@ #size-cells = <0>; }; - dwmmc0@12200000 { + dwmmc_0: dwmmc0@12200000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12200000 0x1000>; interrupts = <0 75 0>; @@ -194,7 +236,7 @@ #size-cells = <0>; }; - dwmmc1@12210000 { + dwmmc_1: dwmmc1@12210000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12210000 0x1000>; interrupts = <0 76 0>; @@ -202,7 +244,7 @@ #size-cells = <0>; }; - dwmmc2@12220000 { + dwmmc_2: dwmmc2@12220000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12220000 0x1000>; interrupts = <0 77 0>; @@ -210,7 +252,7 @@ #size-cells = <0>; }; - dwmmc3@12230000 { + dwmmc_3: dwmmc3@12230000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12230000 0x1000>; interrupts = <0 78 0>; @@ -520,4 +562,16 @@ reg = <0x13e30000 0x1000>; interrupts = <0 88 0>; }; + + hdmi { + compatible = "samsung,exynos5-hdmi"; + reg = <0x14530000 0x100000>; + interrupts = <0 95 0>; + }; + + mixer { + compatible = "samsung,exynos5-mixer"; + reg = <0x14450000 0x10000>; + interrupts = <0 94 0>; + }; }; diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi new file mode 100644 index 000000000000..592fb9dc35bd --- /dev/null +++ b/arch/arm/boot/dts/href.dtsi @@ -0,0 +1,273 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "dbx5x0.dtsi" + +/ { + memory { + reg = <0x00000000 0x20000000>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + linux,code = <11>; + label = "SFH7741 Proximity Sensor"; + }; + }; + + soc-u9500 { + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + i2c@80004000 { + tc3589x@42 { + compatible = "tc3589x"; + reg = <0x42>; + interrupt-parent = <&gpio6>; + interrupts = <25 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + + tc3589x_gpio: tc3589x_gpio { + compatible = "tc3589x-gpio"; + interrupts = <0 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + + i2c@80128000 { + lp5521@0x33 { + compatible = "lp5521"; + reg = <0x33>; + }; + + lp5521@0x34 { + compatible = "lp5521"; + reg = <0x34>; + }; + + bh1780@0x29 { + compatible = "rohm,bh1780gli"; + reg = <0x33>; + }; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&tc3589x_gpio 3 0x4>; + + status = "okay"; + }; + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + + status = "okay"; + }; + + // PoP:ed eMMC + sdi2_per3@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + + status = "okay"; + }; + + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; + }; + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + msp1: msp@80124000 { + status = "okay"; + }; + + msp3: msp@80125000 { + status = "okay"; + }; + + prcmu@80157000 { + db8500-prcmu-regulators { + db8500_vape_reg: db8500_vape { + regulator-name = "db8500-vape"; + }; + + db8500_varm_reg: db8500_varm { + regulator-name = "db8500-varm"; + }; + + db8500_vmodem_reg: db8500_vmodem { + regulator-name = "db8500-vmodem"; + }; + + db8500_vpll_reg: db8500_vpll { + regulator-name = "db8500-vpll"; + }; + + db8500_vsmps1_reg: db8500_vsmps1 { + regulator-name = "db8500-vsmps1"; + }; + + db8500_vsmps2_reg: db8500_vsmps2 { + regulator-name = "db8500-vsmps2"; + }; + + db8500_vsmps3_reg: db8500_vsmps3 { + regulator-name = "db8500-vsmps3"; + }; + + db8500_vrf1_reg: db8500_vrf1 { + regulator-name = "db8500-vrf1"; + }; + + db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-name = "db8500-sva-mmdsp"; + }; + + db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-name = "db8500-sva-mmdsp-ret"; + }; + + db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-name = "db8500_sva_pipe"; + }; + + db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-name = "db8500_sia_mmdsp"; + }; + + db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { + regulator-name = "db8500-sia-mmdsp-ret"; + }; + + db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-name = "db8500-sia-pipe"; + }; + + db8500_sga_reg: db8500_sga { + regulator-name = "db8500-sga"; + }; + + db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-name = "db8500-b2r2-mcde"; + }; + + db8500_esram12_reg: db8500_esram12 { + regulator-name = "db8500-esram12"; + }; + + db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-name = "db8500-esram12-ret"; + }; + + db8500_esram34_reg: db8500_esram34 { + regulator-name = "db8500-esram34"; + }; + + db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-name = "db8500-esram34-ret"; + }; + }; + + ab8500@5 { + ab8500-regulators { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; + + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; + + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; + + ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-name = "dummy"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts new file mode 100644 index 000000000000..eec29c4a86dc --- /dev/null +++ b/arch/arm/boot/dts/hrefprev60.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "dbx5x0.dtsi" +/include/ "href.dtsi" +/include/ "stuib.dtsi" + +/ { + model = "ST-Ericsson HREF (pre-v60) platform with Device Tree"; + compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + + gpio_keys { + button@1 { + gpios = <&tc3589x_gpio 7 0x4>; + }; + }; + + soc-u9500 { + i2c@80004000 { + tps61052@33 { + compatible = "tps61052"; + reg = <0x33>; + }; + }; + + i2c@80110000 { + bu21013_tp@0x5c { + reset-gpio = <&tc3589x_gpio 13 0x4>; + }; + }; + + vmmci: regulator-gpio { + gpios = <&tc3589x_gpio 18 0x4>; + gpio-enable = <&tc3589x_gpio 17 0x4>; + + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts index 2131d77dc9c9..55f4191a626e 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -11,85 +11,200 @@ /dts-v1/; /include/ "dbx5x0.dtsi" +/include/ "href.dtsi" +/include/ "stuib.dtsi" / { - model = "ST-Ericsson HREF platform with Device Tree"; - compatible = "st-ericsson,hrefv60+"; + model = "ST-Ericsson HREF (v60+) platform with Device Tree"; + compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; - memory { - reg = <0x00000000 0x20000000>; + gpio_keys { + button@1 { + gpios = <&gpio6 25 0x4>; + }; }; soc-u9500 { - uart@80120000 { + i2c@80110000 { + bu21013_tp@0x5c { + reset-gpio = <&gpio4 15 0x4>; + }; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&tc3589x_gpio 3 0x4>; + status = "okay"; }; - uart@80121000 { + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + status = "okay"; }; - uart@80007000 { + // PoP:ed eMMC + sdi2_per3@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + status = "okay"; }; - i2c@80004000 { - tc3589x@42 { - compatible = "tc3589x"; - reg = <0x42>; - interrupt-parent = <&gpio6>; - interrupts = <25 0x1>; + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; - interrupt-controller; - #interrupt-cells = <2>; + status = "okay"; + }; - tc3589x_gpio: tc3589x_gpio { - compatible = "tc3589x-gpio"; - interrupts = <0 0x1>; + prcmu@80157000 { + db8500-prcmu-regulators { + db8500_vape_reg: db8500_vape { + regulator-name = "db8500-vape"; + }; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; + db8500_varm_reg: db8500_varm { + regulator-name = "db8500-varm"; }; - }; - tps61052@33 { - compatible = "tps61052"; - reg = <0x33>; - }; - }; + db8500_vmodem_reg: db8500_vmodem { + regulator-name = "db8500-vmodem"; + }; - i2c@80128000 { - lp5521@0x33 { - compatible = "lp5521"; - reg = <0x33>; - }; + db8500_vpll_reg: db8500_vpll { + regulator-name = "db8500-vpll"; + }; - lp5521@0x34 { - compatible = "lp5521"; - reg = <0x34>; - }; + db8500_vsmps1_reg: db8500_vsmps1 { + regulator-name = "db8500-vsmps1"; + }; + + db8500_vsmps2_reg: db8500_vsmps2 { + regulator-name = "db8500-vsmps2"; + }; + + db8500_vsmps3_reg: db8500_vsmps3 { + regulator-name = "db8500-vsmps3"; + }; + + db8500_vrf1_reg: db8500_vrf1 { + regulator-name = "db8500-vrf1"; + }; + + db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-name = "db8500-sva-mmdsp"; + }; + + db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-name = "db8500-sva-mmdsp-ret"; + }; + + db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-name = "db8500_sva_pipe"; + }; - bh1780@0x29 { - compatible = "rohm,bh1780gli"; - reg = <0x33>; + db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-name = "db8500_sia_mmdsp"; + }; + + db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { + regulator-name = "db8500-sia-mmdsp-ret"; + }; + + db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-name = "db8500-sia-pipe"; + }; + + db8500_sga_reg: db8500_sga { + regulator-name = "db8500-sga"; + }; + + db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-name = "db8500-b2r2-mcde"; + }; + + db8500_esram12_reg: db8500_esram12 { + regulator-name = "db8500-esram12"; + }; + + db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-name = "db8500-esram12-ret"; + }; + + db8500_esram34_reg: db8500_esram34 { + regulator-name = "db8500-esram34"; + }; + + db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-name = "db8500-esram34-ret"; + }; }; - }; - sound { - compatible = "stericsson,snd-soc-mop500"; + ab8500@5 { + ab8500-regulators { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; - stericsson,cpu-dai = <&msp1 &msp3>; - stericsson,audio-codec = <&codec>; - }; + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; - msp1: msp@80124000 { - status = "okay"; - }; + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; - msp3: msp@80125000 { - status = "okay"; + ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-name = "dummy"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 384d8b66f337..7c43b8e70b9f 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -40,6 +40,15 @@ reg = <0>; fsl,pinmux-ids = < 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + led_pin_gpio0_17: led_gpio0_17@0 { + reg = <0>; + fsl,pinmux-ids = < 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ >; fsl,drive-strength = <0>; @@ -47,6 +56,15 @@ fsl,pull-up = <0>; }; }; + + ssp1: ssp@80034000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx23-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + }; }; apbx@80040000 { @@ -91,11 +109,12 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio0_17>; user { label = "green"; - gpios = <&gpio2 1 0>; - linux,default-trigger = "default-on"; + gpios = <&gpio2 1 1>; }; }; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 6d31aa383460..65415c598a5e 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -279,6 +279,19 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + spi2_pins_a: spi2@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */ + 0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */ + 0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */ + 0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; }; digctl@8001c000 { diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts new file mode 100644 index 000000000000..d81f8a0b9794 --- /dev/null +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -0,0 +1,44 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx25.dtsi" + +/ { + model = "Ka-Ro TX25"; + compatible = "karo,imx25-tx25", "fsl,imx25"; + + memory { + reg = <0x80000000 0x02000000 0x90000000 0x02000000>; + }; + + soc { + aips@43f00000 { + uart1: serial@43f90000 { + status = "okay"; + }; + }; + + spba@50000000 { + fec: ethernet@50038000 { + status = "okay"; + phy-mode = "rmii"; + }; + }; + + emi@80000000 { + nand@bb000000 { + nand-on-flash-bbt; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi new file mode 100644 index 000000000000..e1b13ebc96d6 --- /dev/null +++ b/arch/arm/boot/dts/imx25.dtsi @@ -0,0 +1,515 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + usb0 = &usbotg; + usb1 = &usbhost1; + }; + + asic: asic-interrupt-controller@68000000 { + compatible = "fsl,imx25-asic", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x68000000 0x8000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc { + compatible = "fsl,imx-osc", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&asic>; + ranges; + + aips@43f00000 { /* AIPS1 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x43f00000 0x100000>; + ranges; + + i2c1: i2c@43f80000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; + reg = <0x43f80000 0x4000>; + clocks = <&clks 48>; + clock-names = ""; + interrupts = <3>; + status = "disabled"; + }; + + i2c3: i2c@43f84000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; + reg = <0x43f84000 0x4000>; + clocks = <&clks 48>; + clock-names = ""; + interrupts = <10>; + status = "disabled"; + }; + + can1: can@43f88000 { + compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; + reg = <0x43f88000 0x4000>; + interrupts = <43>; + clocks = <&clks 75>, <&clks 75>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + can2: can@43f8c000 { + compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; + reg = <0x43f8c000 0x4000>; + interrupts = <44>; + clocks = <&clks 76>, <&clks 76>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@43f90000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + clocks = <&clks 120>, <&clks 57>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@43f94000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x43f94000 0x4000>; + interrupts = <32>; + clocks = <&clks 121>, <&clks 57>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c2: i2c@43f98000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; + reg = <0x43f98000 0x4000>; + clocks = <&clks 48>; + clock-names = ""; + interrupts = <4>; + status = "disabled"; + }; + + owire@43f9c000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x43f9c000 0x4000>; + clocks = <&clks 51>; + clock-names = ""; + interrupts = <2>; + status = "disabled"; + }; + + spi1: cspi@43fa4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; + reg = <0x43fa4000 0x4000>; + clocks = <&clks 62>; + clock-names = "ipg"; + interrupts = <14>; + status = "disabled"; + }; + + kpp@43fa8000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x43fa8000 0x4000>; + clocks = <&clks 102>; + clock-names = ""; + interrupts = <24>; + status = "disabled"; + }; + + iomuxc@43fac000{ + compatible = "fsl,imx25-iomuxc"; + reg = <0x43fac000 0x4000>; + }; + + audmux@43fb0000 { + compatible = "fsl,imx25-audmux", "fsl,imx31-audmux"; + reg = <0x43fb0000 0x4000>; + status = "disabled"; + }; + }; + + spba@50000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x50000000 0x40000>; + ranges; + + spi3: cspi@50004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; + reg = <0x50004000 0x4000>; + interrupts = <0>; + clocks = <&clks 80>; + clock-names = "ipg"; + status = "disabled"; + }; + + uart4: serial@50008000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x50008000 0x4000>; + interrupts = <5>; + clocks = <&clks 123>, <&clks 57>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@5000c000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x5000c000 0x4000>; + interrupts = <18>; + clocks = <&clks 122>, <&clks 57>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + spi2: cspi@50010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; + reg = <0x50010000 0x4000>; + clocks = <&clks 79>; + clock-names = "ipg"; + interrupts = <13>; + status = "disabled"; + }; + + ssi2: ssi@50014000 { + compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; + reg = <0x50014000 0x4000>; + interrupts = <11>; + status = "disabled"; + }; + + esai@50018000 { + reg = <0x50018000 0x4000>; + interrupts = <7>; + }; + + uart5: serial@5002c000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x5002c000 0x4000>; + interrupts = <40>; + clocks = <&clks 124>, <&clks 57>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + tsc: tsc@50030000 { + compatible = "fsl,imx25-adc", "fsl,imx21-tsc"; + reg = <0x50030000 0x4000>; + interrupts = <46>; + clocks = <&clks 119>; + clock-names = "ipg"; + status = "disabled"; + }; + + ssi1: ssi@50034000 { + compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; + reg = <0x50034000 0x4000>; + interrupts = <12>; + status = "disabled"; + }; + + fec: ethernet@50038000 { + compatible = "fsl,imx25-fec"; + reg = <0x50038000 0x4000>; + interrupts = <57>; + clocks = <&clks 88>, <&clks 65>; + clock-names = "ipg", "ahb"; + status = "disabled"; + }; + }; + + aips@53f00000 { /* AIPS2 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x53f00000 0x100000>; + ranges; + + clks: ccm@53f80000 { + compatible = "fsl,imx25-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; + }; + + gpt4: timer@53f84000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f84000 0x4000>; + clocks = <&clks 9>, <&clks 45>; + clock-names = "ipg", "per"; + interrupts = <1>; + }; + + gpt3: timer@53f88000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f88000 0x4000>; + clocks = <&clks 9>, <&clks 47>; + clock-names = "ipg", "per"; + interrupts = <29>; + }; + + gpt2: timer@53f8c000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f8c000 0x4000>; + clocks = <&clks 9>, <&clks 47>; + clock-names = "ipg", "per"; + interrupts = <53>; + }; + + gpt1: timer@53f90000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f90000 0x4000>; + clocks = <&clks 9>, <&clks 47>; + clock-names = "ipg", "per"; + interrupts = <54>; + }; + + epit1: timer@53f94000 { + compatible = "fsl,imx25-epit"; + reg = <0x53f94000 0x4000>; + interrupts = <28>; + }; + + epit2: timer@53f98000 { + compatible = "fsl,imx25-epit"; + reg = <0x53f98000 0x4000>; + interrupts = <27>; + }; + + gpio4: gpio@53f9c000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53f9c000 0x4000>; + interrupts = <23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm2: pwm@53fa0000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; + reg = <0x53fa0000 0x4000>; + clocks = <&clks 106>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <36>; + }; + + gpio3: gpio@53fa4000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53fa4000 0x4000>; + interrupts = <16>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm3: pwm@53fa8000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; + reg = <0x53fa8000 0x4000>; + clocks = <&clks 107>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <41>; + }; + + esdhc1: esdhc@53fb4000 { + compatible = "fsl,imx25-esdhc"; + reg = <0x53fb4000 0x4000>; + interrupts = <9>; + clocks = <&clks 86>, <&clks 63>, <&clks 45>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + esdhc2: esdhc@53fb8000 { + compatible = "fsl,imx25-esdhc"; + reg = <0x53fb8000 0x4000>; + interrupts = <8>; + clocks = <&clks 87>, <&clks 64>, <&clks 46>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + lcdc@53fbc000 { + reg = <0x53fbc000 0x4000>; + interrupts = <39>; + clocks = <&clks 103>, <&clks 66>, <&clks 49>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + slcdc@53fc0000 { + reg = <0x53fc0000 0x4000>; + interrupts = <38>; + status = "disabled"; + }; + + pwm4: pwm@53fc8000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + reg = <0x53fc8000 0x4000>; + clocks = <&clks 108>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <42>; + }; + + gpio1: gpio@53fcc000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53fcc000 0x4000>; + interrupts = <52>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@53fd0000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53fd0000 0x4000>; + interrupts = <51>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sdma@53fd4000 { + compatible = "fsl,imx25-sdma", "fsl,imx35-sdma"; + reg = <0x53fd4000 0x4000>; + clocks = <&clks 112>, <&clks 68>; + clock-names = "ipg", "ahb"; + interrupts = <34>; + }; + + wdog@53fdc000 { + compatible = "fsl,imx25-wdt", "fsl,imx21-wdt"; + reg = <0x53fdc000 0x4000>; + clocks = <&clks 126>; + clock-names = ""; + interrupts = <55>; + }; + + pwm1: pwm@53fe0000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; + reg = <0x53fe0000 0x4000>; + clocks = <&clks 105>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <26>; + }; + + usbphy1: usbphy@1 { + compatible = "nop-usbphy"; + status = "disabled"; + }; + + usbphy2: usbphy@2 { + compatible = "nop-usbphy"; + status = "disabled"; + }; + + usbotg: usb@53ff4000 { + compatible = "fsl,imx25-usb", "fsl,imx27-usb"; + reg = <0x53ff4000 0x0200>; + interrupts = <37>; + clocks = <&clks 9>, <&clks 70>, <&clks 8>; + clock-names = "ipg", "ahb", "per"; + fsl,usbmisc = <&usbmisc 0>; + status = "disabled"; + }; + + usbhost1: usb@53ff4400 { + compatible = "fsl,imx25-usb", "fsl,imx27-usb"; + reg = <0x53ff4400 0x0200>; + interrupts = <35>; + clocks = <&clks 9>, <&clks 70>, <&clks 8>; + clock-names = "ipg", "ahb", "per"; + fsl,usbmisc = <&usbmisc 1>; + status = "disabled"; + }; + + usbmisc: usbmisc@53ff4600 { + #index-cells = <1>; + compatible = "fsl,imx25-usbmisc"; + clocks = <&clks 9>, <&clks 70>, <&clks 8>; + clock-names = "ipg", "ahb", "per"; + reg = <0x53ff4600 0x00f>; + status = "disabled"; + }; + + dryice@53ffc000 { + compatible = "fsl,imx25-dryice", "fsl,imx25-rtc"; + reg = <0x53ffc000 0x4000>; + clocks = <&clks 81>; + clock-names = "ipg"; + interrupts = <25>; + }; + }; + + emi@80000000 { + compatible = "fsl,emi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x3b002000>; + ranges; + + nand@bb000000 { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "fsl,imx25-nand"; + reg = <0xbb000000 0x2000>; + clocks = <&clks 50>; + clock-names = ""; + interrupts = <33>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts new file mode 100644 index 000000000000..c0327c054de2 --- /dev/null +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -0,0 +1,89 @@ +/* + * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr> + * Copyright 2012 Armadeus Systems <support@armadeus.com> + * + * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx27.dtsi" + +/ { + model = "Armadeus Systems APF27 module"; + compatible = "armadeus,imx27-apf27", "fsl,imx27"; + + memory { + reg = <0xa0000000 0x04000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc26m { + compatible = "fsl,imx-osc26m", "fixed-clock"; + clock-frequency = <0>; + }; + }; + + soc { + aipi@10000000 { + serial@1000a000 { + status = "okay"; + }; + + ethernet@1002b000 { + status = "okay"; + }; + }; + + nand@d8000000 { + status = "okay"; + nand-bus-width = <16>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "env2"; + reg = <0x180000 0x80000>; + }; + + partition@200000 { + label = "firmware"; + reg = <0x200000 0x80000>; + }; + + partition@280000 { + label = "dtb"; + reg = <0x280000 0x80000>; + }; + + partition@300000 { + label = "kernel"; + reg = <0x300000 0x500000>; + }; + + partition@800000 { + label = "rootfs"; + reg = <0x800000 0xf800000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 3e54f1498841..b8d3905915ac 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -58,7 +58,7 @@ reg = <0x10000000 0x10000000>; ranges; - wdog@10002000 { + wdog: wdog@10002000 { compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; reg = <0x10002000 0x4000>; interrupts = <27>; @@ -113,7 +113,7 @@ i2c1: i2c@10012000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx27-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; reg = <0x10012000 0x1000>; interrupts = <12>; status = "disabled"; @@ -205,7 +205,7 @@ i2c2: i2c@1001d000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx27-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; reg = <0x1001d000 0x1000>; interrupts = <1>; status = "disabled"; @@ -218,7 +218,8 @@ status = "disabled"; }; }; - nand@d8000000 { + + nfc: nand@d8000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts new file mode 100644 index 000000000000..7eb075876c4c --- /dev/null +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -0,0 +1,85 @@ +/* + * Copyright 2012 Armadeus Systems - <support@armadeus.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Armadeus Systems APF28 module"; + compatible = "armadeus,imx28-apf28", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x300000>; + }; + + partition@300000 { + label = "env"; + reg = <0x300000 0x80000>; + }; + + partition@380000 { + label = "env2"; + reg = <0x380000 0x80000>; + }; + + partition@400000 { + label = "dtb"; + reg = <0x400000 0x80000>; + }; + + partition@480000 { + label = "splash"; + reg = <0x480000 0x80000>; + }; + + partition@500000 { + label = "kernel"; + reg = <0x500000 0x800000>; + }; + + partition@d00000 { + label = "rootfs"; + reg = <0xd00000 0xf300000>; + }; + }; + }; + + apbx@80040000 { + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio4 13 0>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts new file mode 100644 index 000000000000..6d8865bfb4b7 --- /dev/null +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -0,0 +1,154 @@ +/* + * Copyright 2012 Armadeus Systems - <support@armadeus.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* APF28Dev is a docking board for the APF28 SOM */ +/include/ "imx28-apf28.dts" + +/ { + model = "Armadeus Systems APF28Dev docking/development board"; + compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; + }; + + ssp2: ssp@80014000 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_apf28dev>; + + hog_pins_apf28dev: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */ + 0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */ + 0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */ + 0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */ + 0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */ + 0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */ + 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_apf28dev: lcdif-apf28dev@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_16bit_pins_a + &lcdif_pins_apf28dev>; + status = "okay"; + }; + }; + + apbx@80040000 { + lradc@80050000 { + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + status = "okay"; + }; + + usb1: usb@80090000 { + status = "okay"; + }; + + mac1: ethernet@800f4000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + phy-reset-gpios = <&gpio0 23 0>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 23 1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio0 21 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + + pwms = <&pwm 3 191000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index c03a577beca3..1594694532b9 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -22,6 +22,31 @@ apb@80000000 { apbh@80000000 { + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_cfa10036>; + + hog_pins_cfa10036: hog-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + led_pins_cfa10036: leds-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; @@ -33,16 +58,37 @@ }; apbx@80040000 { + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a>; + status = "okay"; + }; + duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_b>; status = "okay"; }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_b>; + status = "okay"; + + ssd1307: oled@3c { + compatible = "solomon,ssd1307fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7 0>; + }; + }; }; }; leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_cfa10036>; power { gpios = <&gpio3 4 1>; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 05c892e931e3..b222614ac9e0 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -22,6 +22,22 @@ apb@80000000 { apbh@80000000 { pinctrl@80018000 { + pinctrl-names = "default", "default"; + pinctrl-1 = <&hog_pins_cfa10049>; + + hog_pins_cfa10049: hog-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ + 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ + 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + spi3_pins_cfa10049: spi3-cfa10049@0 { reg = <0>; fsl,pinmux-ids = < @@ -29,6 +45,7 @@ 0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */ 0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */ 0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */ + 0x01b2 /* MX28_PAD_GPMI_CLE__SSP3_D5 */ >; fsl,drive-strength = <1>; fsl,voltage = <1>; @@ -60,6 +77,11 @@ spi-max-frequency = <100000>; }; + dac0: dh2228@2 { + compatible = "rohm,dh2228fv"; + reg = <2>; + spi-max-frequency = <100000>; + }; }; }; @@ -96,4 +118,15 @@ gpio = <&gpio0 7 1>; }; }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 0>; + phy-reset-duration = <100>; + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index a0ad71ca3a44..2da316e04409 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -76,7 +76,6 @@ 0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */ 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ 0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */ 0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */ >; @@ -85,6 +84,16 @@ fsl,pull-up = <0>; }; + led_pin_gpio3_5: led_gpio3_5@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + gpmi_pins_evk: gpmi-nand-evk@0 { reg = <0>; fsl,pinmux-ids = < @@ -288,6 +297,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio3_5>; user { label = "Heartbeat"; diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts new file mode 100644 index 000000000000..e6cde8aa7fff --- /dev/null +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -0,0 +1,169 @@ +/* + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "SchulerControl GmbH, SC SPS 1"; + compatible = "schulercontrol,imx28-sps1", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */ + 0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */ + 0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + }; + + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a>; + bus-width = <4>; + status = "okay"; + }; + + ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "everspin,mr25h256", "mr25h256"; + spi-max-frequency = <40000000>; + reg = <0>; + }; + }; + }; + + apbx@80040000 { + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + clock-frequency = <400000>; + status = "okay"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + eeprom: eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + pagesize = <32>; + }; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usbphy0_pins_b>; + status = "okay"; + }; + + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; + }; + + mac1: ethernet@800f4000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 9 0>; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + compatible = "gpio-leds"; + status = "okay"; + + led@1 { + label = "sps1-1:yellow:user"; + gpios = <&gpio0 6 0>; + linux,default-trigger = "heartbeat"; + reg = <0>; + }; + + led@2 { + label = "sps1-2:red:user"; + gpios = <&gpio0 3 0>; + linux,default-trigger = "heartbeat"; + reg = <1>; + }; + + led@3 { + label = "sps1-3:red:user"; + gpios = <&gpio0 0 0>; + default-trigger = "heartbeat"; + reg = <2>; + }; + + }; +}; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 55c57ea6169e..d7013f73f2e9 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -492,6 +492,16 @@ fsl,pull-up = <0>; }; + pwm3_pins_a: pwm3@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31c0 /* MX28_PAD_PWM3__PWM_3 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + pwm4_pins_a: pwm4@0 { reg = <0>; fsl,pinmux-ids = < @@ -535,6 +545,31 @@ fsl,pull-up = <0>; }; + lcdif_16bit_pins_a: lcdif-16bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + can0_pins_a: can0@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 75d069fcf897..1fdee31b4909 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -76,17 +76,18 @@ reg = <0x70000000 0x40000>; ranges; - esdhc@70004000 { /* ESDHC1 */ + esdhc1: esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; status = "disabled"; }; - esdhc@70008000 { /* ESDHC2 */ + esdhc2: esdhc@70008000 { compatible = "fsl,imx51-esdhc"; reg = <0x70008000 0x4000>; interrupts = <2>; + bus-width = <4>; status = "disabled"; }; @@ -97,7 +98,7 @@ status = "disabled"; }; - ecspi@70010000 { /* ECSPI1 */ + ecspi1: ecspi@70010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-ecspi"; @@ -115,43 +116,45 @@ status = "disabled"; }; - esdhc@70020000 { /* ESDHC3 */ + esdhc3: esdhc@70020000 { compatible = "fsl,imx51-esdhc"; reg = <0x70020000 0x4000>; interrupts = <3>; + bus-width = <4>; status = "disabled"; }; - esdhc@70024000 { /* ESDHC4 */ + esdhc4: esdhc@70024000 { compatible = "fsl,imx51-esdhc"; reg = <0x70024000 0x4000>; interrupts = <4>; + bus-width = <4>; status = "disabled"; }; }; - usb@73f80000 { + usbotg: usb@73f80000 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80000 0x0200>; interrupts = <18>; status = "disabled"; }; - usb@73f80200 { + usbh1: usb@73f80200 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80200 0x0200>; interrupts = <14>; status = "disabled"; }; - usb@73f80400 { + usbh2: usb@73f80400 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80400 0x0200>; interrupts = <16>; status = "disabled"; }; - usb@73f80600 { + usbh3: usb@73f80600 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80600 0x0200>; interrupts = <17>; @@ -198,20 +201,20 @@ #interrupt-cells = <2>; }; - wdog@73f98000 { /* WDOG1 */ + wdog1: wdog@73f98000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f98000 0x4000>; interrupts = <58>; }; - wdog@73f9c000 { /* WDOG2 */ + wdog2: wdog@73f9c000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f9c000 0x4000>; interrupts = <59>; status = "disabled"; }; - iomuxc@73fa8000 { + iomuxc: iomuxc@73fa8000 { compatible = "fsl,imx51-iomuxc"; reg = <0x73fa8000 0x4000>; @@ -349,7 +352,7 @@ reg = <0x80000000 0x10000000>; ranges; - ecspi@83fac000 { /* ECSPI2 */ + ecspi2: ecspi@83fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-ecspi"; @@ -358,14 +361,14 @@ status = "disabled"; }; - sdma@83fb0000 { + sdma: sdma@83fb0000 { compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; reg = <0x83fb0000 0x4000>; interrupts = <6>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; }; - cspi@83fc0000 { + cspi: cspi@83fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; @@ -374,19 +377,19 @@ status = "disabled"; }; - i2c@83fc4000 { /* I2C2 */ + i2c2: i2c@83fc4000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; reg = <0x83fc4000 0x4000>; interrupts = <63>; status = "disabled"; }; - i2c@83fc8000 { /* I2C1 */ + i2c1: i2c@83fc8000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; reg = <0x83fc8000 0x4000>; interrupts = <62>; status = "disabled"; @@ -401,13 +404,13 @@ status = "disabled"; }; - audmux@83fd0000 { + audmux: audmux@83fd0000 { compatible = "fsl,imx51-audmux", "fsl,imx31-audmux"; reg = <0x83fd0000 0x4000>; status = "disabled"; }; - nand@83fdb000 { + nfc: nand@83fdb000 { compatible = "fsl,imx51-nand"; reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; interrupts = <8>; @@ -423,7 +426,7 @@ status = "disabled"; }; - ethernet@83fec000 { + fec: ethernet@83fec000 { compatible = "fsl,imx51-fec", "fsl,imx27-fec"; reg = <0x83fec000 0x4000>; interrupts = <87>; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 08948af86d1a..b0075537195b 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -60,10 +60,17 @@ 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + 1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */ + >; + }; + + led_pin_gpio7_7: led_gpio7_7@0 { + fsl,pins = < 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ >; }; }; + }; uart1: serial@53fbc000 { @@ -100,76 +107,93 @@ pmic: dialog@48 { compatible = "dlg,da9053-aa", "dlg,da9052"; reg = <0x48>; + interrupt-parent = <&gpio7>; + interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */ regulators { - buck0 { + buck1_reg: buck1 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <2075000>; + regulator-always-on; }; - buck1 { + buck2_reg: buck2 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <2075000>; + regulator-always-on; }; - buck2 { + buck3_reg: buck3 { regulator-min-microvolt = <925000>; regulator-max-microvolt = <2500000>; + regulator-always-on; }; - buck3 { + buck4_reg: buck4 { regulator-min-microvolt = <925000>; regulator-max-microvolt = <2500000>; + regulator-always-on; }; - ldo4 { + ldo1_reg: ldo1 { regulator-min-microvolt = <600000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; }; - ldo5 { + ldo2_reg: ldo2 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { regulator-min-microvolt = <600000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; - ldo6 { + ldo4_reg: ldo4 { regulator-min-microvolt = <1725000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; - ldo7 { + ldo5_reg: ldo5 { regulator-min-microvolt = <1725000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; - ldo8 { + ldo6_reg: ldo6 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; + regulator-always-on; }; - ldo9 { + ldo7_reg: ldo7 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; + regulator-always-on; }; - ldo10 { + ldo8_reg: ldo8 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; + regulator-always-on; }; - ldo11 { + ldo9_reg: ldo9 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; + regulator-always-on; }; - ldo12 { + ldo10_reg: ldo10 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3650000>; - }; - - ldo13 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3600000>; + regulator-always-on; }; }; }; @@ -216,6 +240,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio7_7>; user { label = "Heartbeat"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 76ebb1ad2675..f45d4b1e21b5 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -81,17 +81,19 @@ reg = <0x50000000 0x40000>; ranges; - esdhc@50004000 { /* ESDHC1 */ + esdhc1: esdhc@50004000 { compatible = "fsl,imx53-esdhc"; reg = <0x50004000 0x4000>; interrupts = <1>; + bus-width = <4>; status = "disabled"; }; - esdhc@50008000 { /* ESDHC2 */ + esdhc2: esdhc@50008000 { compatible = "fsl,imx53-esdhc"; reg = <0x50008000 0x4000>; interrupts = <2>; + bus-width = <4>; status = "disabled"; }; @@ -102,7 +104,7 @@ status = "disabled"; }; - ecspi@50010000 { /* ECSPI1 */ + ecspi1: ecspi@50010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; @@ -120,43 +122,45 @@ status = "disabled"; }; - esdhc@50020000 { /* ESDHC3 */ + esdhc3: esdhc@50020000 { compatible = "fsl,imx53-esdhc"; reg = <0x50020000 0x4000>; interrupts = <3>; + bus-width = <4>; status = "disabled"; }; - esdhc@50024000 { /* ESDHC4 */ + esdhc4: esdhc@50024000 { compatible = "fsl,imx53-esdhc"; reg = <0x50024000 0x4000>; interrupts = <4>; + bus-width = <4>; status = "disabled"; }; }; - usb@53f80000 { + usbotg: usb@53f80000 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80000 0x0200>; interrupts = <18>; status = "disabled"; }; - usb@53f80200 { + usbh1: usb@53f80200 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80200 0x0200>; interrupts = <14>; status = "disabled"; }; - usb@53f80400 { + usbh2: usb@53f80400 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80400 0x0200>; interrupts = <16>; status = "disabled"; }; - usb@53f80600 { + usbh3: usb@53f80600 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80600 0x0200>; interrupts = <17>; @@ -203,20 +207,20 @@ #interrupt-cells = <2>; }; - wdog@53f98000 { /* WDOG1 */ + wdog1: wdog@53f98000 { compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f98000 0x4000>; interrupts = <58>; }; - wdog@53f9c000 { /* WDOG2 */ + wdog2: wdog@53f9c000 { compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f9c000 0x4000>; interrupts = <59>; status = "disabled"; }; - iomuxc@53fa8000 { + iomuxc: iomuxc@53fa8000 { compatible = "fsl,imx53-iomuxc"; reg = <0x53fa8000 0x4000>; @@ -316,6 +320,24 @@ }; }; + can1 { + pinctrl_can1_1: can1grp-1 { + fsl,pins = < + 847 0x80000000 /* MX53_PAD_PATA_INTRQ__CAN1_TXCAN */ + 853 0x80000000 /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */ + >; + }; + }; + + can2 { + pinctrl_can2_1: can2grp-1 { + fsl,pins = < + 67 0x80000000 /* MX53_PAD_KEY_COL4__CAN2_TXCAN */ + 74 0x80000000 /* MX53_PAD_KEY_ROW4__CAN2_RXCAN */ + >; + }; + }; + i2c1 { pinctrl_i2c1_1: i2c1grp-1 { fsl,pins = < @@ -334,6 +356,15 @@ }; }; + i2c3 { + pinctrl_i2c3_1: i2c3grp-1 { + fsl,pins = < + 1102 0xc0000000 /* MX53_PAD_GPIO_6__I2C3_SDA */ + 1130 0xc0000000 /* MX53_PAD_GPIO_5__I2C3_SCL */ + >; + }; + }; + uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < @@ -369,6 +400,25 @@ >; }; }; + + uart4 { + pinctrl_uart4_1: uart4grp-1 { + fsl,pins = < + 11 0x1c5 /* MX53_PAD_KEY_COL0__UART4_TXD_MUX */ + 18 0x1c5 /* MX53_PAD_KEY_ROW0__UART4_RXD_MUX */ + >; + }; + }; + + uart5 { + pinctrl_uart5_1: uart5grp-1 { + fsl,pins = < + 24 0x1c5 /* MX53_PAD_KEY_COL1__UART5_TXD_MUX */ + 31 0x1c5 /* MX53_PAD_KEY_ROW1__UART5_RXD_MUX */ + >; + }; + }; + }; uart1: serial@53fbc000 { @@ -429,10 +479,10 @@ #interrupt-cells = <2>; }; - i2c@53fec000 { /* I2C3 */ + i2c3: i2c@53fec000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx53-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; reg = <0x53fec000 0x4000>; interrupts = <64>; status = "disabled"; @@ -460,7 +510,7 @@ status = "disabled"; }; - ecspi@63fac000 { /* ECSPI2 */ + ecspi2: ecspi@63fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; @@ -469,14 +519,14 @@ status = "disabled"; }; - sdma@63fb0000 { + sdma: sdma@63fb0000 { compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; reg = <0x63fb0000 0x4000>; interrupts = <6>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; }; - cspi@63fc0000 { + cspi: cspi@63fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; @@ -485,19 +535,19 @@ status = "disabled"; }; - i2c@63fc4000 { /* I2C2 */ + i2c2: i2c@63fc4000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx53-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; reg = <0x63fc4000 0x4000>; interrupts = <63>; status = "disabled"; }; - i2c@63fc8000 { /* I2C1 */ + i2c1: i2c@63fc8000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx53-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; reg = <0x63fc8000 0x4000>; interrupts = <62>; status = "disabled"; @@ -512,13 +562,13 @@ status = "disabled"; }; - audmux@63fd0000 { + audmux: audmux@63fd0000 { compatible = "fsl,imx53-audmux", "fsl,imx31-audmux"; reg = <0x63fd0000 0x4000>; status = "disabled"; }; - nand@63fdb000 { + nfc: nand@63fdb000 { compatible = "fsl,imx53-nand"; reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>; interrupts = <8>; @@ -534,7 +584,7 @@ status = "disabled"; }; - ethernet@63fec000 { + fec: ethernet@63fec000 { compatible = "fsl,imx53-fec", "fsl,imx25-fec"; reg = <0x63fec000 0x4000>; interrupts = <87>; diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts new file mode 100644 index 000000000000..826e4ad1477e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sabreauto.dts @@ -0,0 +1,64 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx6q.dtsi" + +/ { + model = "Freescale i.MX6 Quad SABRE Automotive Board"; + compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; + + soc { + aips-bus@02000000 { /* AIPS1 */ + iomuxc@020e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */ + 13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */ + >; + }; + }; + }; + }; + + aips-bus@02100000 { /* AIPS2 */ + uart4: serial@021f0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; + status = "okay"; + }; + + ethernet@02188000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_2>; + phy-mode = "rgmii"; + status = "okay"; + }; + + usdhc@02198000 { /* uSDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; + cd-gpios = <&gpio6 15 0>; + wp-gpios = <&gpio1 13 0>; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index e596c28c214d..a42402562b7b 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -38,6 +38,8 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < + 1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */ + 1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */ 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */ 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */ 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */ @@ -73,4 +75,20 @@ }; }; }; + + gpio-keys { + compatible = "gpio-keys"; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 4 0>; + linux,code = <115>; /* KEY_VOLUMEUP */ + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 5 0>; + linux,code = <114>; /* KEY_VOLUMEDOWN */ + }; + }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index f3990b04fecf..6dfeaedef307 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -36,6 +36,14 @@ compatible = "arm,cortex-a9"; reg = <0>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 1100000 + 396000 950000 + 198000 850000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + cpu0-supply = <®_cpu>; }; cpu@1 { @@ -100,7 +108,7 @@ clocks = <&clks 106>; }; - gpmi-nand@00112000 { + nfc: gpmi-nand@00112000 { compatible = "fsl,imx6q-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; @@ -144,12 +152,12 @@ reg = <0x02000000 0x40000>; ranges; - spdif@02004000 { + spdif: spdif@02004000 { reg = <0x02004000 0x4000>; interrupts = <0 52 0x04>; }; - ecspi@02008000 { /* eCSPI1 */ + ecspi1: ecspi@02008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -160,7 +168,7 @@ status = "disabled"; }; - ecspi@0200c000 { /* eCSPI2 */ + ecspi2: ecspi@0200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -171,7 +179,7 @@ status = "disabled"; }; - ecspi@02010000 { /* eCSPI3 */ + ecspi3: ecspi@02010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -182,7 +190,7 @@ status = "disabled"; }; - ecspi@02014000 { /* eCSPI4 */ + ecspi4: ecspi@02014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -193,7 +201,7 @@ status = "disabled"; }; - ecspi@02018000 { /* eCSPI5 */ + ecspi5: ecspi@02018000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -213,7 +221,7 @@ status = "disabled"; }; - esai@02024000 { + esai: esai@02024000 { reg = <0x02024000 0x4000>; interrupts = <0 51 0x04>; }; @@ -248,7 +256,7 @@ status = "disabled"; }; - asrc@02034000 { + asrc: asrc@02034000 { reg = <0x02034000 0x4000>; interrupts = <0 50 0x04>; }; @@ -258,7 +266,7 @@ }; }; - vpu@02040000 { + vpu: vpu@02040000 { reg = <0x02040000 0x3c000>; interrupts = <0 3 0x04 0 12 0x04>; }; @@ -267,37 +275,37 @@ reg = <0x0207c000 0x4000>; }; - pwm@02080000 { /* PWM1 */ + pwm1: pwm@02080000 { reg = <0x02080000 0x4000>; interrupts = <0 83 0x04>; }; - pwm@02084000 { /* PWM2 */ + pwm2: pwm@02084000 { reg = <0x02084000 0x4000>; interrupts = <0 84 0x04>; }; - pwm@02088000 { /* PWM3 */ + pwm3: pwm@02088000 { reg = <0x02088000 0x4000>; interrupts = <0 85 0x04>; }; - pwm@0208c000 { /* PWM4 */ + pwm4: pwm@0208c000 { reg = <0x0208c000 0x4000>; interrupts = <0 86 0x04>; }; - flexcan@02090000 { /* CAN1 */ + can1: flexcan@02090000 { reg = <0x02090000 0x4000>; interrupts = <0 110 0x04>; }; - flexcan@02094000 { /* CAN2 */ + can2: flexcan@02094000 { reg = <0x02094000 0x4000>; interrupts = <0 111 0x04>; }; - gpt@02098000 { + gpt: gpt@02098000 { compatible = "fsl,imx6q-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 0x04>; @@ -373,19 +381,19 @@ #interrupt-cells = <2>; }; - kpp@020b8000 { + kpp: kpp@020b8000 { reg = <0x020b8000 0x4000>; interrupts = <0 82 0x04>; }; - wdog@020bc000 { /* WDOG1 */ + wdog1: wdog@020bc000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 0x04>; clocks = <&clks 0>; }; - wdog@020c0000 { /* WDOG2 */ + wdog2: wdog@020c0000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 0x04>; @@ -447,7 +455,7 @@ anatop-max-voltage = <2750000>; }; - regulator-vddcore@140 { + reg_cpu: regulator-vddcore@140 { compatible = "fsl,anatop-regulator"; regulator-name = "cpu"; regulator-min-microvolt = <725000>; @@ -505,27 +513,35 @@ }; snvs@020cc000 { - reg = <0x020cc000 0x4000>; - interrupts = <0 19 0x04 0 20 0x04>; + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x020cc000 0x4000>; + + snvs-rtc-lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + interrupts = <0 19 0x04 0 20 0x04>; + }; }; - epit@020d0000 { /* EPIT1 */ + epit1: epit@020d0000 { /* EPIT1 */ reg = <0x020d0000 0x4000>; interrupts = <0 56 0x04>; }; - epit@020d4000 { /* EPIT2 */ + epit2: epit@020d4000 { /* EPIT2 */ reg = <0x020d4000 0x4000>; interrupts = <0 57 0x04>; }; - src@020d8000 { + src: src@020d8000 { compatible = "fsl,imx6q-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 0x04 0 96 0x04>; }; - gpc@020dc000 { + gpc: gpc@020dc000 { compatible = "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupts = <0 89 0x04 0 90 0x04>; @@ -536,7 +552,7 @@ reg = <0x020e0000 0x38>; }; - iomuxc@020e0000 { + iomuxc: iomuxc@020e0000 { compatible = "fsl,imx6q-iomuxc"; reg = <0x020e0000 0x4000>; @@ -748,17 +764,17 @@ }; }; - dcic@020e4000 { /* DCIC1 */ + dcic1: dcic@020e4000 { reg = <0x020e4000 0x4000>; interrupts = <0 124 0x04>; }; - dcic@020e8000 { /* DCIC2 */ + dcic2: dcic@020e8000 { reg = <0x020e8000 0x4000>; interrupts = <0 125 0x04>; }; - sdma@020ec000 { + sdma: sdma@020ec000 { compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 0x04>; @@ -784,7 +800,7 @@ reg = <0x0217c000 0x4000>; }; - usb@02184000 { /* USB OTG */ + usbotg: usb@02184000 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = <0 43 0x04>; @@ -794,7 +810,7 @@ status = "disabled"; }; - usb@02184200 { /* USB1 */ + usbh1: usb@02184200 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = <0 40 0x04>; @@ -804,7 +820,7 @@ status = "disabled"; }; - usb@02184400 { /* USB2 */ + usbh2: usb@02184400 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; interrupts = <0 41 0x04>; @@ -813,7 +829,7 @@ status = "disabled"; }; - usb@02184600 { /* USB3 */ + usbh3: usb@02184600 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184600 0x200>; interrupts = <0 42 0x04>; @@ -822,14 +838,14 @@ status = "disabled"; }; - usbmisc: usbmisc@02184800 { + usbmisc: usbmisc: usbmisc@02184800 { #index-cells = <1>; compatible = "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; clocks = <&clks 162>; }; - ethernet@02188000 { + fec: ethernet@02188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = <0 118 0x04 0 119 0x04>; @@ -843,66 +859,70 @@ interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>; }; - usdhc@02190000 { /* uSDHC1 */ + usdhc1: usdhc@02190000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 0x04>; clocks = <&clks 163>, <&clks 163>, <&clks 163>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - usdhc@02194000 { /* uSDHC2 */ + usdhc2: usdhc@02194000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 0x04>; clocks = <&clks 164>, <&clks 164>, <&clks 164>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - usdhc@02198000 { /* uSDHC3 */ + usdhc3: usdhc@02198000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 0x04>; clocks = <&clks 165>, <&clks 165>, <&clks 165>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - usdhc@0219c000 { /* uSDHC4 */ + usdhc4: usdhc@0219c000 { compatible = "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 0x04>; clocks = <&clks 166>, <&clks 166>, <&clks 166>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - i2c@021a0000 { /* I2C1 */ + i2c1: i2c@021a0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021a0000 0x4000>; interrupts = <0 36 0x04>; clocks = <&clks 125>; status = "disabled"; }; - i2c@021a4000 { /* I2C2 */ + i2c2: i2c@021a4000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021a4000 0x4000>; interrupts = <0 37 0x04>; clocks = <&clks 126>; status = "disabled"; }; - i2c@021a8000 { /* I2C3 */ + i2c3: i2c@021a8000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021a8000 0x4000>; interrupts = <0 38 0x04>; clocks = <&clks 127>; @@ -913,12 +933,12 @@ reg = <0x021ac000 0x4000>; }; - mmdc@021b0000 { /* MMDC0 */ + mmdc0: mmdc@021b0000 { /* MMDC0 */ compatible = "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; }; - mmdc@021b4000 { /* MMDC1 */ + mmdc1: mmdc@021b4000 { /* MMDC1 */ reg = <0x021b4000 0x4000>; }; @@ -946,7 +966,7 @@ interrupts = <0 109 0x04>; }; - audmux@021d8000 { + audmux: audmux@021d8000 { compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; status = "disabled"; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 61767757b50a..c9c3fa344647 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -18,6 +18,11 @@ bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk"; }; + syscon { + /* AP system controller registers */ + reg = <0x11000000 0x100>; + }; + timer0: timer@13000000 { compatible = "arm,integrator-timer"; }; diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index 2dd5e4e48481..8b119399025a 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -18,6 +18,11 @@ bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk"; }; + cpcon { + /* CP controller registers */ + reg = <0xcb000000 0x100>; + }; + timer0: timer@13000000 { compatible = "arm,sp804", "arm,primecell"; }; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi new file mode 100644 index 000000000000..d6c9d65cbaeb --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -0,0 +1,44 @@ +/ { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + compatible = "marvell,88f6281-pinctrl"; + reg = <0x10000 0x20>; + + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", + "mpp19"; + marvell,function = "nand"; + }; + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp5", "mpp21", "mpp23"; + marvell,function = "sata0"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp4", "mpp20", "mpp22"; + marvell,function = "sata1"; + }; + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + pmx_sdio: pmx-sdio { + marvell,pins = "mpp12", "mpp13", "mpp14", + "mpp15", "mpp16", "mpp17"; + marvell,function = "sdio"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi new file mode 100644 index 000000000000..9ae2004d5675 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -0,0 +1,45 @@ +/ { + ocp@f1000000 { + + pinctrl: pinctrl@10000 { + compatible = "marvell,88f6282-pinctrl"; + reg = <0x10000 0x20>; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp5", "mpp21", "mpp23"; + marvell,function = "sata0"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp4", "mpp20", "mpp22"; + marvell,function = "sata1"; + }; + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + }; + + i2c@11100 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <32>; + clock-frequency = <100000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi new file mode 100644 index 000000000000..3271e4c8ea07 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi @@ -0,0 +1,31 @@ +/ { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + compatible = "marvell,98dx4122-pinctrl"; + reg = <0x10000 0x20>; + + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", + "mpp19"; + marvell,function = "nand"; + }; + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 9b32d0272825..6875ac00c174 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -1,4 +1,5 @@ /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "D-Link DNS NASes (kirkwood-based)"; @@ -35,7 +36,116 @@ 6000 2>; }; + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 4 0>; + }; + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand &pmx_uart1 + &pmx_sata0 &pmx_sata1 + &pmx_led_power + &pmx_led_red_right_hdd + &pmx_led_red_left_hdd + &pmx_led_red_usb_325 + &pmx_button_power + &pmx_led_red_usb_320 + &pmx_power_off &pmx_power_back_on + &pmx_power_sata0 &pmx_power_sata1 + &pmx_present_sata0 &pmx_present_sata1 + &pmx_led_white_usb &pmx_fan_tacho + &pmx_fan_high_speed &pmx_fan_low_speed + &pmx_button_unmount &pmx_button_reset + &pmx_temp_alarm >; + pinctrl-names = "default"; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp20"; + marvell,function = "sata1"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp21"; + marvell,function = "sata0"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; + pmx_led_red_right_hdd: pmx-led-red-right-hdd { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + pmx_led_red_left_hdd: pmx-led-red-left-hdd { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_led_red_usb_325: pmx-led-red-usb-325 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_button_power: pmx-button-power { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_red_usb_320: pmx-led-red-usb-320 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_power_off: pmx-power-off { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_power_back_on: pmx-power-back-on { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_power_sata0: pmx-power-sata0 { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_power_sata1: pmx-power-sata1 { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_present_sata0: pmx-present-sata0 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_present_sata1: pmx-present-sata1 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_led_white_usb: pmx-led-white-usb { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_fan_tacho: pmx-fan-tacho { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_fan_high_speed: pmx-fan-high-speed { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_fan_low_speed: pmx-fan-low-speed { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_button_unmount: pmx-button-unmount { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + pmx_temp_alarm: pmx-temp-alarm { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + }; sata@80000 { status = "okay"; nr-ports = <2>; @@ -43,6 +153,7 @@ nand@3000000 { status = "okay"; + chip-delay = <35>; partition@0 { label = "u-boot"; @@ -76,4 +187,33 @@ }; }; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sata0_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 7 0>; + }; + sata1_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 8 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 08a582414b88..2e3dd34e21a5 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Seagate FreeAgent Dockstar"; @@ -16,6 +17,25 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_usb_power_enable + &pmx_led_green &pmx_led_orange >; + pinctrl-names = "default"; + + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_led_green: pmx-led-green { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_orange: pmx-led-orange { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; @@ -54,4 +74,21 @@ gpios = <&gpio1 15 1>; }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 26e281fbf6bc..f2d386c95b07 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Globalscale Technologies Dreamplug"; @@ -16,6 +17,26 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_spi + &pmx_led_bluetooth &pmx_led_wifi + &pmx_led_wifi_ap >; + pinctrl-names = "default"; + + pmx_led_bluetooth: pmx-led-bluetooth { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_led_wifi: pmx-led-wifi { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + pmx_led_wifi_ap: pmx-led-wifi-ap { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 7c8238fbb6f9..1b133e0c566e 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Seagate GoFlex Net"; @@ -16,6 +17,61 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange + &pmx_led_left_cap_0 &pmx_led_left_cap_1 + &pmx_led_left_cap_2 &pmx_led_left_cap_3 + &pmx_led_right_cap_0 &pmx_led_right_cap_1 + &pmx_led_right_cap_2 &pmx_led_right_cap_3 + >; + pinctrl-names = "default"; + + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_0: pmx-led_right_cap_0 { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_1: pmx-led_right_cap_1 { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_2: pmx-led_right_cap_2 { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_3: pmx-led_right_cap_3 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_0: pmx-led_left_cap_0 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_1: pmx-led_left_cap_1 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_2: pmx-led_left_cap_2 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_3: pmx-led_left_cap_3 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_led_green: pmx-led_green { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_orange: pmx-led_orange { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; @@ -96,4 +152,21 @@ gpios = <&gpio1 9 0>; }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 66794ed75ff1..71902da33d63 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; @@ -16,6 +17,39 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand + &pmx_led_os_red &pmx_power_off + &pmx_led_os_green &pmx_led_usb_transfer + &pmx_button_reset &pmx_button_usb_copy >; + pinctrl-names = "default"; + + pmx_led_os_red: pmx-led-os-red { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + pmx_power_off: pmx-power-off { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + pmx_led_os_green: pmx-led-os-green { + marvell,pins = "mpp25"; + marvell,function = "gpio"; + }; + pmx_led_usb_transfer: pmx-led-usb-transfer { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_button_usb_copy: pmx-button-usb-copy { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "okay"; @@ -79,4 +113,10 @@ gpios = <&gpio0 27 0>; }; }; + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 24 0>; + }; + + }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index d97cd9d4753e..504f16be8b54 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Iomega Iconnect"; @@ -18,6 +19,56 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_gpio_12 &pmx_gpio_35 + &pmx_gpio_41 &pmx_gpio_42 + &pmx_gpio_43 &pmx_gpio_44 + &pmx_gpio_45 &pmx_gpio_46 + &pmx_gpio_47 &pmx_gpio_48 >; + pinctrl-names = "default"; + + pmx_gpio_12: pmx-gpio-12 { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_gpio_35: pmx-gpio-35 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_gpio_41: pmx-gpio-41 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_gpio_42: pmx-gpio-42 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_gpio_43: pmx-gpio-43 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_gpio_44: pmx-gpio-44 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_gpio_45: pmx-gpio-45 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_gpio_46: pmx-gpio-46 { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_gpio_47: pmx-gpio-47 { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_gpio_48: pmx-gpio-48 { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + }; i2c@11000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 865aeec40a26..6cae4599c4b3 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Iomega StorCenter ix2-200"; @@ -16,6 +17,94 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_button_reset &pmx_button_power + &pmx_led_backup &pmx_led_power + &pmx_button_otb &pmx_led_rebuild + &pmx_led_health + &pmx_led_sata_brt_ctrl_1 + &pmx_led_sata_brt_ctrl_2 + &pmx_led_backup_brt_ctrl_1 + &pmx_led_backup_brt_ctrl_2 + &pmx_led_power_brt_ctrl_1 + &pmx_led_power_brt_ctrl_2 + &pmx_led_health_brt_ctrl_1 + &pmx_led_health_brt_ctrl_2 + &pmx_led_rebuild_brt_ctrl_1 + &pmx_led_rebuild_brt_ctrl_2 >; + pinctrl-names = "default"; + + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_button_power: pmx-button-power { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + pmx_led_backup: pmx-led-backup { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + pmx_button_otb: pmx-button-otb { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_led_rebuild: pmx-led-rebuild { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_health: pmx-led_health { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + }; i2c@11000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts new file mode 100644 index 000000000000..0bdce0ad7277 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-is2.dts @@ -0,0 +1,30 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Internet Space v2"; + compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 75bdb93fed26..8db3123ac80f 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-98dx4122.dtsi" / { model = "Keymile Kirkwood Reference Design"; @@ -16,6 +17,22 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand &pmx_i2c_gpio_sda + &pmx_i2c_gpio_scl >; + pinctrl-names = "default"; + + pmx_i2c_gpio_sda: pmx-gpio-sda { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_i2c_gpio_scl: pmx-gpio-scl { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + }; + serial@12000 { clock-frequency = <200000000>; status = "ok"; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 8fea375c734d..37d45c4f88fb 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -1,4 +1,5 @@ /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { chosen { @@ -6,6 +7,71 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus + &pmx_fan_low &pmx_fan_high + &pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_fan_lock &pmx_button_function + &pmx_power_switch &pmx_power_auto_switch + &pmx_led_function_blue >; + pinctrl-names = "default"; + + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp10"; + marvell,function = "gpo"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp11"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp18"; + marvell,function = "gpo"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp19"; + marvell,function = "gpo"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function_red { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + }; sata@80000 { status = "okay"; nr-ports = <1>; @@ -94,4 +160,44 @@ gpios = <&gpio1 16 1>; }; }; + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 19 1 + &gpio0 18 1>; + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + alarm-gpios = <&gpio1 8 0>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 11 0>; + }; + hdd_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 10 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts new file mode 100644 index 000000000000..262c65403760 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -0,0 +1,178 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + model = "MPL CEC4"; + compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand &pmx_uart0 + &pmx_led_health &pmx_sdio + &pmx_sata0 &pmx_sata1 + &pmx_led_user1o + &pmx_led_user1g &pmx_led_user0o + &pmx_led_user0g &pmx_led_misc + &pmx_sdio_cd + >; + pinctrl-names = "default"; + + pmx_led_health: pmx-led-health { + marvell,pins = "mpp7"; + marvell,function = "gpo"; + }; + + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp34"; + marvell,function = "sata1"; + }; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp35"; + marvell,function = "sata0"; + }; + + pmx_led_user1o: pmx-led-user1o { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + pmx_led_user1g: pmx-led-user1g { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_user0o: pmx-led-user0o { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_led_user0g: pmx-led-user0g { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_led_misc: pmx-led-misc { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + + i2c@11000 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; + + }; + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "fdt"; + reg = <0x180000 0x80000>; + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "rootfs"; + reg = <0x600000 0x1fa00000>; + }; + }; + + rtc@10300 { + status = "disabled"; + }; + + sata@80000 { + nr-ports = <2>; + status = "okay"; + + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio0 7 1>; + }; + + user1o { + label = "user1:orange"; + gpios = <&gpio1 8 1>; + default-state = "on"; + }; + + user1g { + label = "user1:green"; + gpios = <&gpio1 9 1>; + default-state = "on"; + }; + + user0o { + label = "user0:orange"; + gpios = <&gpio1 12 1>; + default-state = "on"; + }; + + user0g { + label = "user0:green"; + gpios = <&gpio1 13 1>; + default-state = "on"; + }; + + misc { + label = "status:orange:misc"; + gpios = <&gpio1 14 1>; + default-state = "on"; + }; + + }; +}; + diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi new file mode 100644 index 000000000000..9bc6785ad228 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -0,0 +1,63 @@ +/include/ "kirkwood.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + spi@10600 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l4005a"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + }; + }; + + i2c@11000 { + status = "okay"; + + eeprom@50 { + compatible = "at,24c04"; + pagesize = <16>; + reg = <0x50>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power push button"; + linux,code = <116>; + gpios = <&gpio1 0 0>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-fail { + label = "ns2:red:fail"; + gpios = <&gpio0 12 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts new file mode 100644 index 000000000000..f2d36ecf36d8 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2.dts @@ -0,0 +1,30 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space v2"; + compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts new file mode 100644 index 000000000000..b02eb4ea1bb4 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts @@ -0,0 +1,30 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space Lite v2"; + compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + blue-sata { + label = "ns2:blue:sata"; + gpios = <&gpio0 30 1>; + linux,default-trigger = "default-on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts new file mode 100644 index 000000000000..bcec4d6cada7 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts @@ -0,0 +1,49 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space Max v2"; + compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 22 1 + &gpio0 7 1 + &gpio1 1 1 + &gpio0 23 1>; + gpio-fan,speed-map = + < 0 0 + 1500 15 + 1700 14 + 1800 13 + 2100 12 + 3100 11 + 3300 10 + 4300 9 + 5500 8>; + alarm-gpios = <&gpio0 25 1>; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts new file mode 100644 index 000000000000..b79f5eb25589 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -0,0 +1,49 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space Mini v2"; + compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 22 1 + &gpio0 7 1 + &gpio1 1 1 + &gpio0 23 1>; + gpio-fan,speed-map = + < 0 0 + 3000 15 + 3180 14 + 4140 13 + 4570 12 + 6760 11 + 7140 10 + 7980 9 + 9200 8>; + alarm-gpios = <&gpio0 25 1>; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts new file mode 100644 index 000000000000..5509f9659546 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -0,0 +1,144 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "ZyXEL NSA310"; + compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + ocp@f1000000 { + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + i2c@11000 { + status = "okay"; + }; + + nand@3000000 { + status = "okay"; + chip-delay = <35>; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x0100000>; + read-only; + }; + partition@100000 { + label = "uboot_env"; + reg = <0x0100000 0x0080000>; + }; + partition@180000 { + label = "key_store"; + reg = <0x0180000 0x0080000>; + }; + partition@200000 { + label = "info"; + reg = <0x0200000 0x0080000>; + }; + partition@280000 { + label = "etc"; + reg = <0x0280000 0x0a00000>; + }; + partition@c80000 { + label = "kernel_1"; + reg = <0x0c80000 0x0a00000>; + }; + partition@1680000 { + label = "rootfs1"; + reg = <0x1680000 0x2fc0000>; + }; + partition@4640000 { + label = "kernel_2"; + reg = <0x4640000 0x0a00000>; + }; + partition@5040000 { + label = "rootfs2"; + reg = <0x5040000 0x2fc0000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power Button"; + linux,code = <116>; + gpios = <&gpio1 14 0>; + }; + button@2 { + label = "Copy Button"; + linux,code = <133>; + gpios = <&gpio1 5 1>; + }; + button@3 { + label = "Reset Button"; + linux,code = <0x198>; + gpios = <&gpio1 4 1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + green-sys { + label = "nsa310:green:sys"; + gpios = <&gpio0 28 0>; + }; + red-sys { + label = "nsa310:red:sys"; + gpios = <&gpio0 29 0>; + }; + green-hdd { + label = "nsa310:green:hdd"; + gpios = <&gpio1 9 0>; + }; + red-hdd { + label = "nsa310:red:hdd"; + gpios = <&gpio1 10 0>; + }; + green-esata { + label = "nsa310:green:esata"; + gpios = <&gpio0 12 0>; + }; + red-esata { + label = "nsa310:red:esata"; + gpios = <&gpio0 13 0>; + }; + green-usb { + label = "nsa310:green:usb"; + gpios = <&gpio0 15 0>; + }; + red-usb { + label = "nsa310:red:usb"; + gpios = <&gpio0 16 0>; + }; + green-copy { + label = "nsa310:green:copy"; + gpios = <&gpio1 7 0>; + }; + red-copy { + label = "nsa310:red:copy"; + gpios = <&gpio1 8 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts new file mode 100644 index 000000000000..49d3d74d4d38 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -0,0 +1,98 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6282.dtsi" + +/ { + model = "Plat'Home OpenBlocksA6"; + compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + serial@12100 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + chip-delay = <25>; + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0 0x90000>; + }; + + partition@90000 { + label = "env"; + reg = <0x90000 0x44000>; + }; + + partition@d4000 { + label = "test"; + reg = <0xd4000 0x24000>; + }; + + partition@f4000 { + label = "conf"; + reg = <0xf4000 0x400000>; + }; + + partition@4f4000 { + label = "linux"; + reg = <0x4f4000 0x1d20000>; + }; + + partition@2214000 { + label = "user"; + reg = <0x2214000 0x1dec000>; + }; + }; + + sata@80000 { + nr-ports = <1>; + status = "okay"; + }; + + i2c@11100 { + status = "okay"; + + s35390a: s35390a@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-red { + label = "obsa6:red:stat"; + gpios = <&gpio1 9 1>; + }; + + led-green { + label = "obsa6:green:stat"; + gpios = <&gpio1 10 1>; + }; + + led-yellow { + label = "obsa6:yellow:stat"; + gpios = <&gpio1 11 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts new file mode 100644 index 000000000000..c0de5a7f660d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -0,0 +1,85 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Univeral Scientific Industrial Co. Topkick-1281P2"; + compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + }; + + partition@180000 { + label = "u-boot env"; + reg = <0x0180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "uInitrd"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "rootfs"; + reg = <0x1800000 0xe800000>; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + disk { + label = "topkick:yellow:disk"; + gpios = <&gpio0 21 1>; + linux,default-trigger = "ide-disk"; + }; + system2 { + label = "topkick:red:system"; + gpios = <&gpio1 5 1>; + }; + system { + label = "topkick:blue:system"; + gpios = <&gpio1 6 1>; + default-state = "on"; + }; + wifi { + label = "topkick:green:wifi"; + gpios = <&gpio1 7 1>; + }; + wifi2 { + label = "topkick:yellow:wifi"; + gpios = <&gpio1 16 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index ccbf32757800..8295c833887f 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -1,8 +1,39 @@ /dts-v1/; /include/ "kirkwood-ts219.dtsi" +/include/ "kirkwood-6281.dtsi" / { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi + &pmx_twsi0 &pmx_sata0 &pmx_sata1 + &pmx_ram_size &pmx_reset_button + &pmx_USB_copy_button &pmx_board_id>; + pinctrl-names = "default"; + + pmx_ram_size: pmx-ram-size { + /* RAM: 0: 256 MB, 1: 512 MB */ + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_USB_copy_button: pmx-USB-copy-button { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + pmx_reset_button: pmx-reset-button { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + pmx_board_id: pmx-board-id { + /* 0: TS-11x, 1: TS-21x */ + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + }; + }; + gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index fbe9932161a1..df3f95dfba33 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -1,8 +1,39 @@ /dts-v1/; /include/ "kirkwood-ts219.dtsi" +/include/ "kirkwood-6282.dtsi" / { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi + &pmx_twsi0 &pmx_sata0 &pmx_sata1 + &pmx_ram_size &pmx_reset_button + &pmx_USB_copy_button &pmx_board_id>; + pinctrl-names = "default"; + + pmx_ram_size: pmx-ram-size { + /* RAM: 0: 256 MB, 1: 512 MB */ + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_reset_button: pmx-reset-button { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_USB_copy_button: pmx-USB-copy-button { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_board_id: pmx-board-id { + /* 0: TS-11x, 1: TS-21x */ + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + }; + }; + gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 4e5b8154a5be..a990c30f0a26 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -4,6 +4,10 @@ compatible = "marvell,kirkwood"; interrupt-parent = <&intc>; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + }; intc: interrupt-controller { compatible = "marvell,orion-intc", "marvell,intc"; interrupt-controller; @@ -24,7 +28,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0x10100 0x40>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; interrupts = <35>, <36>, <37>, <38>; }; @@ -33,7 +38,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0x10140 0x40>; - ngpio = <18>; + ngpios = <18>; + interrupt-controller; interrupts = <39>, <40>, <41>; }; @@ -77,6 +83,13 @@ status = "okay"; }; + ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <19>; + status = "okay"; + }; + sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index e5ffe960dbf3..1582f484a867 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -182,6 +182,13 @@ pnx,timeout = <0x64>; }; + mpwm: mpwm@400E8000 { + compatible = "nxp,lpc3220-motor-pwm"; + reg = <0x400E8000 0x78>; + status = "disabled"; + #pwm-cells = <2>; + }; + i2cusb: i2c@31020300 { compatible = "nxp,pnx-i2c"; reg = <0x31020300 0x100>; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 581cb081cb0f..761c4b69b25b 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,omap2430", "ti,omap2420", "ti,omap2"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -65,5 +66,90 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; }; + + timer2: timer@4802a000 { + compatible = "ti,omap2-timer"; + reg = <0x4802a000 0x400>; + interrupts = <38>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48078000 { + compatible = "ti,omap2-timer"; + reg = <0x48078000 0x400>; + interrupts = <39>; + ti,hwmods = "timer3"; + }; + + timer4: timer@4807a000 { + compatible = "ti,omap2-timer"; + reg = <0x4807a000 0x400>; + interrupts = <40>; + ti,hwmods = "timer4"; + }; + + timer5: timer@4807c000 { + compatible = "ti,omap2-timer"; + reg = <0x4807c000 0x400>; + interrupts = <41>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4807e000 { + compatible = "ti,omap2-timer"; + reg = <0x4807e000 0x400>; + interrupts = <42>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@48080000 { + compatible = "ti,omap2-timer"; + reg = <0x48080000 0x400>; + interrupts = <43>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@48082000 { + compatible = "ti,omap2-timer"; + reg = <0x48082000 0x400>; + interrupts = <44>; + ti,hwmods = "timer8"; + ti,timer-dsp; + }; + + timer9: timer@48084000 { + compatible = "ti,omap2-timer"; + reg = <0x48084000 0x400>; + interrupts = <45>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x400>; + interrupts = <46>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x400>; + interrupts = <47>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + timer12: timer@4808a000 { + compatible = "ti,omap2-timer"; + reg = <0x4808a000 0x400>; + interrupts = <48>; + ti,hwmods = "timer12"; + ti,timer-pwm; + }; }; }; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index bfd76b4a0ddc..af6560908905 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -14,6 +14,12 @@ compatible = "ti,omap2420", "ti,omap2"; ocp { + counter32k: counter@48004000 { + compatible = "ti,omap-counter32k"; + reg = <0x48004000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap2420_pmx: pinmux@48000030 { compatible = "ti,omap2420-padconf", "pinctrl-single"; reg = <0x48000030 0x0113>; @@ -30,7 +36,6 @@ interrupts = <59>, /* TX interrupt */ <60>; /* RX interrupt */ interrupt-names = "tx", "rx"; - interrupt-parent = <&intc>; ti,hwmods = "mcbsp1"; }; @@ -41,8 +46,15 @@ interrupts = <62>, /* TX interrupt */ <63>; /* RX interrupt */ interrupt-names = "tx", "rx"; - interrupt-parent = <&intc>; ti,hwmods = "mcbsp2"; }; + + timer1: timer@48028000 { + compatible = "ti,omap2-timer"; + reg = <0x48028000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; }; }; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 4565d9750f4d..c3924457c9b6 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -14,6 +14,12 @@ compatible = "ti,omap2430", "ti,omap2"; ocp { + counter32k: counter@49020000 { + compatible = "ti,omap-counter32k"; + reg = <0x49020000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap2430_pmx: pinmux@49002030 { compatible = "ti,omap2430-padconf", "pinctrl-single"; reg = <0x49002030 0x0154>; @@ -32,7 +38,6 @@ <60>, /* RX interrupt */ <61>; /* RX overflow interrupt */ interrupt-names = "common", "tx", "rx", "rx_overflow"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -45,7 +50,6 @@ <62>, /* TX interrupt */ <63>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -58,7 +62,6 @@ <89>, /* TX interrupt */ <90>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; @@ -71,7 +74,6 @@ <54>, /* TX interrupt */ <55>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -84,9 +86,16 @@ <81>, /* TX interrupt */ <82>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; }; + + timer1: timer@49018000 { + compatible = "ti,omap2-timer"; + reg = <0x49018000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; }; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index c38cf76df81f..3705a81c1fc2 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -55,12 +55,6 @@ interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; - vsim: regulator-vsim { - compatible = "ti,twl4030-vsim"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - twl_audio: audio { compatible = "ti,twl4030-audio"; codec { diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts new file mode 100644 index 000000000000..f624dc85d441 --- /dev/null +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + model = "TI OMAP3 BeagleBoard"; + compatible = "ti,omap3-beagle", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + compatible = "gpio-leds"; + pmu_stat { + label = "beagleboard::pmu_stat"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + }; + + heartbeat { + label = "beagleboard::usr0"; + gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "beagleboard::usr1"; + gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ + linux,default-trigger = "mmc0"; + }; + }; + +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 696e929d0304..1acc26148ffc 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -12,6 +12,7 @@ / { compatible = "ti,omap3430", "ti,omap3"; + interrupt-parent = <&intc>; aliases { serial0 = &uart1; @@ -60,6 +61,12 @@ ranges; ti,hwmods = "l3_main"; + counter32k: counter@48320000 { + compatible = "ti,omap-counter32k"; + reg = <0x48320000 0x20>; + ti,hwmods = "counter_32k"; + }; + intc: interrupt-controller@48200000 { compatible = "ti,omap2-intc"; interrupt-controller; @@ -240,7 +247,6 @@ <59>, /* TX interrupt */ <60>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -255,7 +261,6 @@ <63>, /* RX interrupt */ <4>; /* Sidetone */ interrupt-names = "common", "tx", "rx", "sidetone"; - interrupt-parent = <&intc>; ti,buffer-size = <1280>; ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; }; @@ -270,7 +275,6 @@ <90>, /* RX interrupt */ <5>; /* Sidetone */ interrupt-names = "common", "tx", "rx", "sidetone"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; }; @@ -283,7 +287,6 @@ <54>, /* TX interrupt */ <55>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -296,9 +299,103 @@ <81>, /* TX interrupt */ <82>; /* RX interrupt */ interrupt-names = "common", "tx", "rx"; - interrupt-parent = <&intc>; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; }; + + timer1: timer@48318000 { + compatible = "ti,omap2-timer"; + reg = <0x48318000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@49032000 { + compatible = "ti,omap2-timer"; + reg = <0x49032000 0x400>; + interrupts = <38>; + ti,hwmods = "timer2"; + }; + + timer3: timer@49034000 { + compatible = "ti,omap2-timer"; + reg = <0x49034000 0x400>; + interrupts = <39>; + ti,hwmods = "timer3"; + }; + + timer4: timer@49036000 { + compatible = "ti,omap2-timer"; + reg = <0x49036000 0x400>; + interrupts = <40>; + ti,hwmods = "timer4"; + }; + + timer5: timer@49038000 { + compatible = "ti,omap2-timer"; + reg = <0x49038000 0x400>; + interrupts = <41>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4903a000 { + compatible = "ti,omap2-timer"; + reg = <0x4903a000 0x400>; + interrupts = <42>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@4903c000 { + compatible = "ti,omap2-timer"; + reg = <0x4903c000 0x400>; + interrupts = <43>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4903e000 { + compatible = "ti,omap2-timer"; + reg = <0x4903e000 0x400>; + interrupts = <44>; + ti,hwmods = "timer8"; + ti,timer-pwm; + ti,timer-dsp; + }; + + timer9: timer@49040000 { + compatible = "ti,omap2-timer"; + reg = <0x49040000 0x400>; + interrupts = <45>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x400>; + interrupts = <46>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x400>; + interrupts = <47>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + timer12: timer@48304000 { + compatible = "ti,omap2-timer"; + reg = <0x48304000 0x400>; + interrupts = <95>; + ti,hwmods = "timer12"; + ti,timer-alwon; + ti,timer-secure; + }; }; }; diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts new file mode 100644 index 000000000000..75466d2abfb5 --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-panda.dts" + +/* Pandaboard Rev A4+ have external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/arch/arm/boot/dts/omap4-pandaES.dts b/arch/arm/boot/dts/omap4-panda-es.dts index d4ba43a48d9b..73bc1a67e444 100644 --- a/arch/arm/boot/dts/omap4-pandaES.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -22,3 +22,12 @@ "AFML", "Line In", "AFMR", "Line In"; }; + +/* PandaboardES has external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index e8f927cbb376..4122efe31cfd 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -65,6 +65,8 @@ &twl6040_pins &mcpdm_pins &mcbsp1_pins + &dss_hdmi_pins + &tpd12s015_pins >; twl6040_pins: pinmux_twl6040_pins { @@ -92,6 +94,22 @@ 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; }; &i2c1 { @@ -184,3 +202,7 @@ &dmic { status = "disabled"; }; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts new file mode 100644 index 000000000000..b4a40ffbce31 --- /dev/null +++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-sdp.dts" + +/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */ +&dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */ + 0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */ + >; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 5b7e04fbff50..43e5258a9372 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -124,6 +124,8 @@ &dmic_pins &mcbsp1_pins &mcbsp2_pins + &dss_hdmi_pins + &tpd12s015_pins >; uart2_pins: pinmux_uart2_pins { @@ -194,6 +196,22 @@ 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */ >; }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; }; &i2c1 { @@ -406,3 +424,7 @@ &mcbsp3 { status = "disabled"; }; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; diff --git a/arch/arm/boot/dts/omap4-var_som.dts b/arch/arm/boot/dts/omap4-var-som.dts index 6601e6af6092..6601e6af6092 100644 --- a/arch/arm/boot/dts/omap4-var_som.dts +++ b/arch/arm/boot/dts/omap4-var-som.dts diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 3883f94fdbd0..739bb79e410e 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -95,6 +95,12 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + counter32k: counter@4a304000 { + compatible = "ti,omap-counter32k"; + reg = <0x4a304000 0x20>; + ti,hwmods = "counter_32k"; + }; + omap4_pmx_core: pinmux@4a100040 { compatible = "ti,omap4-padconf", "pinctrl-single"; reg = <0x4a100040 0x0196>; @@ -340,7 +346,6 @@ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; @@ -350,7 +355,6 @@ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; @@ -361,7 +365,6 @@ reg-names = "mpu", "dma"; interrupts = <0 17 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -373,7 +376,6 @@ reg-names = "mpu", "dma"; interrupts = <0 22 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -385,7 +387,6 @@ reg-names = "mpu", "dma"; interrupts = <0 23 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; @@ -396,7 +397,6 @@ reg-names = "mpu"; interrupts = <0 16 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; }; @@ -431,12 +431,103 @@ hw-caps-temp-alert; }; - ocp2scp { + ocp2scp@4a0ad000 { compatible = "ti,omap-ocp2scp"; + reg = <0x4a0ad000 0x1f>; #address-cells = <1>; #size-cells = <1>; ranges; ti,hwmods = "ocp2scp_usb_phy"; }; + + timer1: timer@4a318000 { + compatible = "ti,omap2-timer"; + reg = <0x4a318000 0x80>; + interrupts = <0 37 0x4>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48032000 { + compatible = "ti,omap2-timer"; + reg = <0x48032000 0x80>; + interrupts = <0 38 0x4>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48034000 { + compatible = "ti,omap2-timer"; + reg = <0x48034000 0x80>; + interrupts = <0 39 0x4>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48036000 { + compatible = "ti,omap2-timer"; + reg = <0x48036000 0x80>; + interrupts = <0 40 0x4>; + ti,hwmods = "timer4"; + }; + + timer5: timer@40138000 { + compatible = "ti,omap2-timer"; + reg = <0x40138000 0x80>, + <0x49038000 0x80>; + interrupts = <0 41 0x4>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4013a000 { + compatible = "ti,omap2-timer"; + reg = <0x4013a000 0x80>, + <0x4903a000 0x80>; + interrupts = <0 42 0x4>; + ti,hwmods = "timer6"; + ti,timer-dsp; + }; + + timer7: timer@4013c000 { + compatible = "ti,omap2-timer"; + reg = <0x4013c000 0x80>, + <0x4903c000 0x80>; + interrupts = <0 43 0x4>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4013e000 { + compatible = "ti,omap2-timer"; + reg = <0x4013e000 0x80>, + <0x4903e000 0x80>; + interrupts = <0 44 0x4>; + ti,hwmods = "timer8"; + ti,timer-pwm; + ti,timer-dsp; + }; + + timer9: timer@4803e000 { + compatible = "ti,omap2-timer"; + reg = <0x4803e000 0x80>; + interrupts = <0 45 0x4>; + ti,hwmods = "timer9"; + ti,timer-pwm; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x80>; + interrupts = <0 46 0x4>; + ti,hwmods = "timer10"; + ti,timer-pwm; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x80>; + interrupts = <0 47 0x4>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; }; }; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index c663eba73168..8722c15bbba2 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap5.dtsi" +/include/ "samsung_k3pe0e000b.dtsi" / { model = "TI OMAP5 EVM board"; @@ -15,7 +16,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ + reg = <0x80000000 0x80000000>; /* 2 GB */ }; vmmcsd_fixed: fixedregulator-mmcsd { @@ -140,3 +141,13 @@ &mcbsp3 { status = "disabled"; }; + +&emif1 { + cs1-used; + device-handle = <&samsung_K3PE0E000B>; +}; + +&emif2 { + cs1-used; + device-handle = <&samsung_K3PE0E000B>; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 42c78beb4fdc..790bb2a4b343 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -77,6 +77,12 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + counter32k: counter@4ae04000 { + compatible = "ti,omap-counter32k"; + reg = <0x4ae04000 0x40>; + ti,hwmods = "counter_32k"; + }; + omap5_pmx_core: pinmux@4a002840 { compatible = "ti,omap4-padconf", "pinctrl-single"; reg = <0x4a002840 0x01b6>; @@ -104,6 +110,8 @@ gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; + reg = <0x4ae10000 0x200>; + interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -113,6 +121,8 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; + reg = <0x48055000 0x200>; + interrupts = <0 30 0x4>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -122,6 +132,8 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; + reg = <0x48057000 0x200>; + interrupts = <0 31 0x4>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -131,6 +143,8 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; + reg = <0x48059000 0x200>; + interrupts = <0 32 0x4>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -140,6 +154,8 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; + reg = <0x4805b000 0x200>; + interrupts = <0 33 0x4>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -149,6 +165,8 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; + reg = <0x4805d000 0x200>; + interrupts = <0 34 0x4>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -158,6 +176,8 @@ gpio7: gpio@48051000 { compatible = "ti,omap4-gpio"; + reg = <0x48051000 0x200>; + interrupts = <0 35 0x4>; ti,hwmods = "gpio7"; gpio-controller; #gpio-cells = <2>; @@ -167,6 +187,8 @@ gpio8: gpio@48053000 { compatible = "ti,omap4-gpio"; + reg = <0x48053000 0x200>; + interrupts = <0 121 0x4>; ti,hwmods = "gpio8"; gpio-controller; #gpio-cells = <2>; @@ -176,6 +198,8 @@ i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; + reg = <0x48070000 0x100>; + interrupts = <0 56 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -183,6 +207,8 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; + reg = <0x48072000 0x100>; + interrupts = <0 57 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -190,20 +216,26 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; + reg = <0x48060000 0x100>; + interrupts = <0 61 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; }; - i2c4: i2c@4807A000 { + i2c4: i2c@4807a000 { compatible = "ti,omap4-i2c"; + reg = <0x4807a000 0x100>; + interrupts = <0 62 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; }; - i2c5: i2c@4807C000 { + i2c5: i2c@4807c000 { compatible = "ti,omap4-i2c"; + reg = <0x4807c000 0x100>; + interrupts = <0 60 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c5"; @@ -211,42 +243,56 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; + reg = <0x4806a000 0x100>; + interrupts = <0 72 0x4>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap4-uart"; + reg = <0x4806c000 0x100>; + interrupts = <0 73 0x4>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; uart3: serial@48020000 { compatible = "ti,omap4-uart"; + reg = <0x48020000 0x100>; + interrupts = <0 74 0x4>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; uart4: serial@4806e000 { compatible = "ti,omap4-uart"; + reg = <0x4806e000 0x100>; + interrupts = <0 70 0x4>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; uart5: serial@48066000 { - compatible = "ti,omap5-uart"; + compatible = "ti,omap4-uart"; + reg = <0x48066000 0x100>; + interrupts = <0 105 0x4>; ti,hwmods = "uart5"; clock-frequency = <48000000>; }; uart6: serial@48068000 { - compatible = "ti,omap6-uart"; + compatible = "ti,omap4-uart"; + reg = <0x48068000 0x100>; + interrupts = <0 106 0x4>; ti,hwmods = "uart6"; clock-frequency = <48000000>; }; mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + interrupts = <0 83 0x4>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -254,24 +300,32 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480b4000 0x400>; + interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; }; mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480ad000 0x400>; + interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; }; mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d1000 0x400>; + interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; }; mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d5000 0x400>; + interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; }; @@ -287,7 +341,6 @@ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; }; @@ -297,7 +350,6 @@ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; - interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; @@ -308,7 +360,6 @@ reg-names = "mpu", "dma"; interrupts = <0 17 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; }; @@ -320,7 +371,6 @@ reg-names = "mpu", "dma"; interrupts = <0 22 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; }; @@ -332,9 +382,119 @@ reg-names = "mpu", "dma"; interrupts = <0 23 0x4>; interrupt-names = "common"; - interrupt-parent = <&gic>; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; }; + + timer1: timer@4ae18000 { + compatible = "ti,omap2-timer"; + reg = <0x4ae18000 0x80>; + interrupts = <0 37 0x4>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48032000 { + compatible = "ti,omap2-timer"; + reg = <0x48032000 0x80>; + interrupts = <0 38 0x4>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48034000 { + compatible = "ti,omap2-timer"; + reg = <0x48034000 0x80>; + interrupts = <0 39 0x4>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48036000 { + compatible = "ti,omap2-timer"; + reg = <0x48036000 0x80>; + interrupts = <0 40 0x4>; + ti,hwmods = "timer4"; + }; + + timer5: timer@40138000 { + compatible = "ti,omap2-timer"; + reg = <0x40138000 0x80>, + <0x49038000 0x80>; + interrupts = <0 41 0x4>; + ti,hwmods = "timer5"; + ti,timer-dsp; + }; + + timer6: timer@4013a000 { + compatible = "ti,omap2-timer"; + reg = <0x4013a000 0x80>, + <0x4903a000 0x80>; + interrupts = <0 42 0x4>; + ti,hwmods = "timer6"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer7: timer@4013c000 { + compatible = "ti,omap2-timer"; + reg = <0x4013c000 0x80>, + <0x4903c000 0x80>; + interrupts = <0 43 0x4>; + ti,hwmods = "timer7"; + ti,timer-dsp; + }; + + timer8: timer@4013e000 { + compatible = "ti,omap2-timer"; + reg = <0x4013e000 0x80>, + <0x4903e000 0x80>; + interrupts = <0 44 0x4>; + ti,hwmods = "timer8"; + ti,timer-dsp; + ti,timer-pwm; + }; + + timer9: timer@4803e000 { + compatible = "ti,omap2-timer"; + reg = <0x4803e000 0x80>; + interrupts = <0 45 0x4>; + ti,hwmods = "timer9"; + }; + + timer10: timer@48086000 { + compatible = "ti,omap2-timer"; + reg = <0x48086000 0x80>; + interrupts = <0 46 0x4>; + ti,hwmods = "timer10"; + }; + + timer11: timer@48088000 { + compatible = "ti,omap2-timer"; + reg = <0x48088000 0x80>; + interrupts = <0 47 0x4>; + ti,hwmods = "timer11"; + ti,timer-pwm; + }; + + emif1: emif@0x4c000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif1"; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4c000000 0x400>; + interrupts = <0 110 0x4>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + emif2: emif@0x4d000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif2"; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4d000000 0x400>; + interrupts = <0 111 0x4>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; }; diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts new file mode 100644 index 000000000000..5a3a58b7e18f --- /dev/null +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "orion5x.dtsi" + +/ { + model = "LaCie Ethernet Disk mini V2"; + compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Power-on Switch"; + linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio0 18 0>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + + led@1 { + label = "power:blue"; + gpios = <&gpio0 16 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi new file mode 100644 index 000000000000..8aad00f81ed9 --- /dev/null +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Marvell Orion5x SoC"; + compatible = "marvell,orion5x"; + interrupt-parent = <&intc>; + + intc: interrupt-controller { + compatible = "marvell,orion-intc", "marvell,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf1020204 0x04>; + }; + + ocp@f1000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xf1000000 0x4000000 + 0xf2200000 0xf2200000 0x0000800>; + #address-cells = <1>; + #size-cells = <1>; + + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpio = <32>; + interrupts = <6>, <7>, <8>, <9>; + }; + + serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <3>; + /* set clock-frequency in board dts */ + status = "disabled"; + }; + + serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <4>; + /* set clock-frequency in board dts */ + status = "disabled"; + }; + + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + + wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + status = "okay"; + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <29>; + status = "disabled"; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <5>; + clock-frequency = <100000>; + status = "disabled"; + }; + + crypto@90000 { + compatible = "marvell,orion-crypto"; + reg = <0x90000 0x10000>, + <0xf2200000 0x800>; + reg-names = "regs", "sram"; + interrupts = <22>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi b/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi new file mode 100644 index 000000000000..9657a5cbc3ad --- /dev/null +++ b/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi @@ -0,0 +1,67 @@ +/* + * Timings and Geometry for Samsung K3PE0E000B memory part + */ + +/ { + samsung_K3PE0E000B: lpddr2 { + compatible = "Samsung,K3PE0E000B","jedec,lpddr2-s4"; + density = <4096>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_samsung_K3PE0E000B_533MHz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <533333333>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + + timings_samsung_K3PE0E000B_266MHz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <266666666>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 702c0baa6004..9e02a913eb62 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -14,7 +14,7 @@ / { model = "Calao Systems Snowball platform with device tree"; - compatible = "calaosystems,snowball-a9500"; + compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500"; memory { reg = <0x00000000 0x20000000>; @@ -120,10 +120,10 @@ }; // External Micro SD slot - sdi@80126000 { + sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; max-frequency = <50000000>; - bus-width = <8>; + bus-width = <4>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; @@ -134,7 +134,7 @@ }; // On-board eMMC - sdi@80114000 { + sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; max-frequency = <50000000>; bus-width = <8>; @@ -183,5 +183,137 @@ reg = <0x33>; }; }; + + prcmu@80157000 { + db8500-prcmu-regulators { + db8500_vape_reg: db8500_vape { + regulator-name = "db8500-vape"; + }; + + db8500_varm_reg: db8500_varm { + regulator-name = "db8500-varm"; + }; + + db8500_vmodem_reg: db8500_vmodem { + regulator-name = "db8500-vmodem"; + }; + + db8500_vpll_reg: db8500_vpll { + regulator-name = "db8500-vpll"; + }; + + db8500_vsmps1_reg: db8500_vsmps1 { + regulator-name = "db8500-vsmps1"; + }; + + db8500_vsmps2_reg: db8500_vsmps2 { + regulator-name = "db8500-vsmps2"; + }; + + db8500_vsmps3_reg: db8500_vsmps3 { + regulator-name = "db8500-vsmps3"; + }; + + db8500_vrf1_reg: db8500_vrf1 { + regulator-name = "db8500-vrf1"; + }; + + db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-name = "db8500-sva-mmdsp"; + }; + + db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-name = "db8500-sva-mmdsp-ret"; + }; + + db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-name = "db8500_sva_pipe"; + }; + + db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-name = "db8500_sia_mmdsp"; + }; + + db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { + regulator-name = "db8500-sia-mmdsp-ret"; + }; + + db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-name = "db8500-sia-pipe"; + }; + + db8500_sga_reg: db8500_sga { + regulator-name = "db8500-sga"; + }; + + db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-name = "db8500-b2r2-mcde"; + }; + + db8500_esram12_reg: db8500_esram12 { + regulator-name = "db8500-esram12"; + }; + + db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-name = "db8500-esram12-ret"; + }; + + db8500_esram34_reg: db8500_esram34 { + regulator-name = "db8500-esram34"; + }; + + db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-name = "db8500-esram34-ret"; + }; + }; + + ab8500@5 { + ab8500-regulators { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; + + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; + + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; + + ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-name = "dummy"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi new file mode 100644 index 000000000000..39446a247e79 --- /dev/null +++ b/arch/arm/boot/dts/stuib.dtsi @@ -0,0 +1,78 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + soc-u9500 { + i2c@80004000 { + stmpe1601: stmpe1601@40 { + compatible = "st,stmpe1601"; + reg = <0x40>; + interrupts = <26 0x1>; + interrupt-parent = <&gpio6>; + interrupt-controller; + + wakeup-source; + st,autosleep-timeout = <1024>; + + stmpe_keypad { + compatible = "st,stmpe-keypad"; + + debounce-interval = <64>; + st,scan-count = <8>; + st,no-autorepeat; + + linux,keymap = <0x205006b + 0x4010074 + 0x3050072 + 0x1030004 + 0x502006a + 0x500000a + 0x5008b + 0x706001c + 0x405000b + 0x6070003 + 0x3040067 + 0x303006c + 0x60400e7 + 0x602009e + 0x4020073 + 0x5050002 + 0x4030069 + 0x3020008>; + }; + }; + }; + + i2c@80110000 { + bu21013_tp@0x5c { + compatible = "rhom,bu21013_tp"; + reg = <0x5c>; + touch-gpio = <&gpio2 20 0x4>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + + rhom,touch-max-x = <384>; + rhom,touch-max-y = <704>; + rhom,flip-y; + }; + + bu21013_tp@0x5d { + compatible = "rhom,bu21013_tp"; + reg = <0x5d>; + touch-gpio = <&gpio2 20 0x4>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + + rhom,touch-max-x = <384>; + rhom,touch-max-y = <704>; + rhom,flip-y; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index c3ef1ad26b6a..43eb72af8948 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -10,6 +10,18 @@ reg = <0x00000000 0x40000000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -262,9 +274,9 @@ }; }; - i2c@7000c400 { + hdmi_ddc: i2c@7000c400 { status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>; }; i2c@7000c500 { @@ -297,131 +309,98 @@ vinldo9-supply = <&sm2_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - sys_reg: regulator@0 { - reg = <0>; - regulator-compatible = "sys"; + sys_reg: sys { regulator-name = "vdd_sys"; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sm0"; + sm0 { regulator-name = "vdd_sm0,vdd_core"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sm1"; + sm1 { regulator-name = "vdd_sm1,vdd_cpu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - sm2_reg: regulator@3 { - reg = <3>; - regulator-compatible = "sm2"; + sm2_reg: sm2 { regulator-name = "vdd_sm2,vin_ldo*"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; regulator-always-on; }; - regulator@4 { - reg = <4>; - regulator-compatible = "ldo0"; + ldo0 { regulator-name = "vdd_ldo0,vddio_pex_clk"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@5 { - reg = <5>; - regulator-compatible = "ldo1"; + ldo1 { regulator-name = "vdd_ldo1,avdd_pll*"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - regulator@6 { - reg = <6>; - regulator-compatible = "ldo2"; + ldo2 { regulator-name = "vdd_ldo2,vdd_rtc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - regulator@7 { - reg = <7>; - regulator-compatible = "ldo3"; + ldo3 { regulator-name = "vdd_ldo3,avdd_usb*"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@8 { - reg = <8>; - regulator-compatible = "ldo4"; + ldo4 { regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - regulator@9 { - reg = <9>; - regulator-compatible = "ldo5"; + ldo5 { regulator-name = "vdd_ldo5,vcore_mmc"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@10 { - reg = <10>; - regulator-compatible = "ldo6"; + ldo6 { regulator-name = "vdd_ldo6,avdd_vdac"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@11 { - reg = <11>; - regulator-compatible = "ldo7"; + hdmi_vdd_reg: ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@12 { - reg = <12>; - regulator-compatible = "ldo8"; + hdmi_pll_reg: ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@13 { - reg = <13>; - regulator-compatible = "ldo9"; + ldo9 { regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@14 { - reg = <14>; - regulator-compatible = "ldo_rtc"; + ldo_rtc { regulator-name = "vdd_rtc_out,vdd_cell"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -429,6 +408,11 @@ }; }; }; + + temperature-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; }; pmc { diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index ddf287f52d49..6a93d1404c76 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -291,37 +291,26 @@ vinldo9-supply = <&sm2_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - sys_reg: regulator@0 { - reg = <0>; - regulator-compatible = "sys"; + sys_reg: sys { regulator-name = "vdd_sys"; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sm0"; + sm0 { regulator-name = "+1.2vs_sm0,vdd_core"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sm1"; + sm1 { regulator-name = "+1.0vs_sm1,vdd_cpu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - sm2_reg: regulator@3 { - reg = <3>; - regulator-compatible = "sm2"; + sm2_reg: sm2 { regulator-name = "+3.7vs_sm2,vin_ldo*"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; @@ -330,53 +319,41 @@ /* LDO0 is not connected to anything */ - regulator@5 { - reg = <5>; - regulator-compatible = "ldo1"; + ldo1 { regulator-name = "+1.1vs_ldo1,avdd_pll*"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - regulator@6 { - reg = <6>; - regulator-compatible = "ldo2"; + ldo2 { regulator-name = "+1.2vs_ldo2,vdd_rtc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - regulator@7 { - reg = <7>; - regulator-compatible = "ldo3"; + ldo3 { regulator-name = "+3.3vs_ldo3,avdd_usb*"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@8 { - reg = <8>; - regulator-compatible = "ldo4"; + ldo4 { regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - regulator@9 { - reg = <9>; - regulator-compatible = "ldo5"; + ldo5 { regulator-name = "+2.85vs_ldo5,vcore_mmc"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@10 { - reg = <10>; - regulator-compatible = "ldo6"; + ldo6 { /* * Research indicates this should be * 1.8v; other boards that use this @@ -390,34 +367,26 @@ regulator-max-microvolt = <1800000>; }; - regulator@11 { - reg = <11>; - regulator-compatible = "ldo7"; + ldo7 { regulator-name = "+3.3vs_ldo7,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@12 { - reg = <12>; - regulator-compatible = "ldo8"; + ldo8 { regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@13 { - reg = <13>; - regulator-compatible = "ldo9"; + ldo9 { regulator-name = "+2.85vs_ldo9,vdd_ddr_rx"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@14 { - reg = <14>; - regulator-compatible = "ldo_rtc"; + ldo_rtc { regulator-name = "+3.3vs_rtc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts index 331a3ef24d59..289480026fbf 100644 --- a/arch/arm/boot/dts/tegra20-plutux.dts +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -6,6 +6,12 @@ model = "Avionic Design Plutux board"; compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20"; + host1x { + hdmi { + status = "okay"; + }; + }; + i2c@7000c000 { wm8903: wm8903@1a { compatible = "wlf,wm8903"; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index f0ba901676ac..eafeca65eb21 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -395,37 +395,26 @@ vinldo9-supply = <&sm2_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - sys_reg: regulator@0 { - reg = <0>; - regulator-compatible = "sys"; + sys_reg: sys { regulator-name = "vdd_sys"; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sm0"; + sm0 { regulator-name = "vdd_sm0,vdd_core"; regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sm1"; + sm1 { regulator-name = "vdd_sm1,vdd_cpu"; regulator-min-microvolt = <1125000>; regulator-max-microvolt = <1125000>; regulator-always-on; }; - sm2_reg: regulator@3 { - reg = <3>; - regulator-compatible = "sm2"; + sm2_reg: sm2 { regulator-name = "vdd_sm2,vin_ldo*"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; @@ -434,86 +423,66 @@ /* LDO0 is not connected to anything */ - regulator@5 { - reg = <5>; - regulator-compatible = "ldo1"; + ldo1 { regulator-name = "vdd_ldo1,avdd_pll*"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - regulator@6 { - reg = <6>; - regulator-compatible = "ldo2"; + ldo2 { regulator-name = "vdd_ldo2,vdd_rtc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - regulator@7 { - reg = <7>; - regulator-compatible = "ldo3"; + ldo3 { regulator-name = "vdd_ldo3,avdd_usb*"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@8 { - reg = <8>; - regulator-compatible = "ldo4"; + ldo4 { regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - regulator@9 { - reg = <9>; - regulator-compatible = "ldo5"; + ldo5 { regulator-name = "vdd_ldo5,vcore_mmc"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@10 { - reg = <10>; - regulator-compatible = "ldo6"; + ldo6 { regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@11 { - reg = <11>; - regulator-compatible = "ldo7"; + ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@12 { - reg = <12>; - regulator-compatible = "ldo8"; + ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@13 { - reg = <13>; - regulator-compatible = "ldo9"; + ldo9 { regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@14 { - reg = <14>; - regulator-compatible = "ldo_rtc"; + ldo_rtc { regulator-name = "vdd_rtc_out,vdd_cell"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -592,6 +561,12 @@ status = "okay"; }; + sdhci@c8000000 { + status = "okay"; + power-gpios = <&gpio 86 0>; /* gpio PK6 */ + bus-width = <4>; + }; + sdhci@c8000400 { status = "okay"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index f18cec9f6a77..a239ccdfaa52 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -8,6 +8,16 @@ reg = <0x00000000 0x20000000>; }; + host1x { + hdmi { + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -62,10 +72,6 @@ nvidia,pins = "dap4"; nvidia,function = "dap4"; }; - ddc { - nvidia,pins = "ddc"; - nvidia,function = "i2c2"; - }; dta { nvidia,pins = "dta", "dtd"; nvidia,function = "sdio2"; @@ -91,7 +97,7 @@ nvidia,function = "pcie"; }; hdint { - nvidia,pins = "hdint", "pta"; + nvidia,pins = "hdint"; nvidia,function = "hdmi"; }; i2cp { @@ -230,6 +236,39 @@ nvidia,pull = <1>; }; }; + + state_i2cmux_ddc: pinmux_i2cmux_ddc { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_pta: pinmux_i2cmux_pta { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; + }; + + state_i2cmux_idle: pinmux_i2cmux_idle { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; }; i2s@70002800 { @@ -246,6 +285,36 @@ status = "okay"; }; + i2c@7000c400 { + clock-frequency = <100000>; + status = "okay"; + }; + + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@7000c400}>; + + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + hdmi_ddc: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + i2c@7000d000 { clock-frequency = <400000>; status = "okay"; @@ -271,97 +340,72 @@ vinldo9-supply = <&sm2_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - sys_reg: regulator@0 { - reg = <0>; - regulator-compatible = "sys"; + sys_reg: sys { regulator-name = "vdd_sys"; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sm0"; + sm0 { regulator-name = "vdd_sys_sm0,vdd_core"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sm1"; + sm1 { regulator-name = "vdd_sys_sm1,vdd_cpu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - sm2_reg: regulator@3 { - reg = <3>; - regulator-compatible = "sm2"; + sm2_reg: sm2 { regulator-name = "vdd_sys_sm2,vin_ldo*"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; regulator-always-on; }; - regulator@4 { - reg = <4>; - regulator-compatible = "ldo0"; + ldo0 { regulator-name = "vdd_ldo0,vddio_pex_clk"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@5 { - reg = <5>; - regulator-compatible = "ldo1"; + ldo1 { regulator-name = "vdd_ldo1,avdd_pll*"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - regulator@6 { - reg = <6>; - regulator-compatible = "ldo2"; + ldo2 { regulator-name = "vdd_ldo2,vdd_rtc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - regulator@7 { - reg = <7>; - regulator-compatible = "ldo3"; + ldo3 { regulator-name = "vdd_ldo3,avdd_usb*"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@8 { - reg = <8>; - regulator-compatible = "ldo4"; + ldo4 { regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - regulator@9 { - reg = <9>; - regulator-compatible = "ldo5"; + ldo5 { regulator-name = "vdd_ldo5,vcore_mmc"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; }; - regulator@10 { - reg = <10>; - regulator-compatible = "ldo6"; + ldo6 { regulator-name = "vdd_ldo6,avdd_vdac"; /* * According to the Tegra 2 Automotive @@ -373,25 +417,19 @@ regulator-max-microvolt = <2850000>; }; - regulator@11 { - reg = <11>; - regulator-compatible = "ldo7"; + hdmi_vdd_reg: ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@12 { - reg = <12>; - regulator-compatible = "ldo8"; + hdmi_pll_reg: ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@13 { - reg = <13>; - regulator-compatible = "ldo9"; + ldo9 { regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam"; /* * According to the Tegra 2 Automotive @@ -404,9 +442,7 @@ regulator-always-on; }; - regulator@14 { - reg = <14>; - regulator-compatible = "ldo_rtc"; + ldo_rtc { regulator-name = "vdd_rtc_out"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -414,6 +450,11 @@ }; }; }; + + temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + }; }; pmc { diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index 9aff31b0fe4a..402b21004bef 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -6,10 +6,13 @@ model = "Avionic Design Tamonten Evaluation Carrier"; compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20"; - i2c@7000c000 { - clock-frequency = <400000>; - status = "okay"; + host1x { + hdmi { + status = "okay"; + }; + }; + i2c@7000c000 { wm8903: wm8903@1a { compatible = "wlf,wm8903"; reg = <0x1a>; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 27fb8a67ea42..b70b4cb754c8 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -10,6 +10,18 @@ reg = <0x00000000 0x40000000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -249,14 +261,24 @@ clock-frequency = <216000000>; }; - i2c@7000c000 { + dvi_ddc: i2c@7000c000 { status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>; }; - i2c@7000c400 { + spi@7000c380 { status = "okay"; - clock-frequency = <400000>; + spi-max-frequency = <48000000>; + spi-flash@0 { + compatible = "winbond,w25q80bl"; + reg = <0>; + spi-max-frequency = <48000000>; + }; + }; + + hdmi_ddc: i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; }; i2c@7000c500 { @@ -300,6 +322,30 @@ bus-width = <4>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + hdmi_vdd_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + hdmi_pll_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + sound { compatible = "nvidia,tegra-audio-trimslice"; nvidia,i2s-controller = <&tegra_i2s1>; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 3e5952fcfbc5..adc47547eaae 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -64,11 +64,6 @@ nvidia,pins = "dap4"; nvidia,function = "dap4"; }; - ddc { - nvidia,pins = "ddc", "owc", "spdi", "spdo", - "uac"; - nvidia,function = "rsvd2"; - }; dta { nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte"; nvidia,function = "vi"; @@ -98,7 +93,7 @@ nvidia,function = "pcie"; }; hdint { - nvidia,pins = "hdint", "pta"; + nvidia,pins = "hdint"; nvidia,function = "hdmi"; }; i2cp { @@ -129,6 +124,10 @@ "lspi", "lvp1", "lvs"; nvidia,function = "displaya"; }; + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; pmc { nvidia,pins = "pmc"; nvidia,function = "pwr_on"; @@ -237,6 +236,49 @@ "ld23_22"; nvidia,pull = <1>; }; + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = <1>; + nvidia,low-power-mode = <3>; + nvidia,pull-down-strength = <31>; + nvidia,pull-up-strength = <31>; + nvidia,slew-rate-rising = <3>; + nvidia,slew-rate-falling = <3>; + }; + }; + + state_i2cmux_ddc: pinmux_i2cmux_ddc { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_pta: pinmux_i2cmux_pta { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; + }; + + state_i2cmux_idle: pinmux_i2cmux_idle { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; }; }; @@ -281,6 +323,31 @@ clock-frequency = <400000>; }; + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@7000c400}>; + + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + i2c@7000c500 { status = "okay"; clock-frequency = <400000>; @@ -311,37 +378,26 @@ vinldo9-supply = <&sm2_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - sys_reg: regulator@0 { - reg = <0>; - regulator-compatible = "sys"; + sys_reg: sys { regulator-name = "vdd_sys"; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sm0"; + sm0 { regulator-name = "vdd_sm0,vdd_core"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sm1"; + sm1 { regulator-name = "vdd_sm1,vdd_cpu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - sm2_reg: regulator@3 { - reg = <3>; - regulator-compatible = "sm2"; + sm2_reg: sm2 { regulator-name = "vdd_sm2,vin_ldo*"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; @@ -350,86 +406,66 @@ /* LDO0 is not connected to anything */ - regulator@5 { - reg = <5>; - regulator-compatible = "ldo1"; + ldo1 { regulator-name = "vdd_ldo1,avdd_pll*"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - regulator@6 { - reg = <6>; - regulator-compatible = "ldo2"; + ldo2 { regulator-name = "vdd_ldo2,vdd_rtc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - regulator@7 { - reg = <7>; - regulator-compatible = "ldo3"; + ldo3 { regulator-name = "vdd_ldo3,avdd_usb*"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@8 { - reg = <8>; - regulator-compatible = "ldo4"; + ldo4 { regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - regulator@9 { - reg = <9>; - regulator-compatible = "ldo5"; + ldo5 { regulator-name = "vdd_ldo5,vcore_mmc"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@10 { - reg = <10>; - regulator-compatible = "ldo6"; + ldo6 { regulator-name = "vdd_ldo6,avdd_vdac"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@11 { - reg = <11>; - regulator-compatible = "ldo7"; + ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@12 { - reg = <12>; - regulator-compatible = "ldo8"; + ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@13 { - reg = <13>; - regulator-compatible = "ldo9"; + ldo9 { regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@14 { - reg = <14>; - regulator-compatible = "ldo_rtc"; + ldo_rtc { regulator-name = "vdd_rtc_out,vdd_cell"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -437,6 +473,11 @@ }; }; }; + + temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + }; }; pmc { @@ -456,6 +497,12 @@ status = "okay"; }; + sdhci@c8000000 { + status = "okay"; + power-gpios = <&gpio 86 0>; /* gpio PK6 */ + bus-width = <4>; + }; + sdhci@c8000400 { status = "okay"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index c636d002d6d8..20d576ecd555 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -10,6 +10,18 @@ reg = <0x00000000 0x20000000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -246,6 +258,11 @@ clock-frequency = <216000000>; }; + hdmi_ddc: i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + i2c@7000d000 { status = "okay"; clock-frequency = <100000>; @@ -295,243 +312,182 @@ in20-supply = <&mbatt_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - mbatt_reg: regulator@0 { - reg = <0>; - regulator-compatible = "mbatt"; + mbatt_reg: mbatt { regulator-name = "vbat_pmu"; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sd1"; + sd1 { regulator-name = "nvvdd_sv1,vdd_cpu_pmu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sd2"; + sd2 { regulator-name = "nvvdd_sv2,vdd_core"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - nvvdd_sv3_reg: regulator@3 { - reg = <3>; - regulator-compatible = "sd3"; + nvvdd_sv3_reg: sd3 { regulator-name = "nvvdd_sv3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - regulator@4 { - reg = <4>; - regulator-compatible = "ldo1"; + ldo1 { regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@5 { - reg = <5>; - regulator-compatible = "ldo2"; + ldo2 { regulator-name = "nvvdd_ldo2,avdd_pll*"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - regulator@6 { - reg = <6>; - regulator-compatible = "ldo3"; + ldo3 { regulator-name = "nvvdd_ldo3,vcom_1v8b"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - regulator@7 { - reg = <7>; - regulator-compatible = "ldo4"; + ldo4 { regulator-name = "nvvdd_ldo4,avdd_usb*"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@8 { - reg = <8>; - regulator-compatible = "ldo5"; + ldo5 { regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; - regulator@9 { - reg = <9>; - regulator-compatible = "ldo6"; + hdmi_pll_reg: ldo6 { regulator-name = "nvvdd_ldo6,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@10 { - reg = <10>; - regulator-compatible = "ldo7"; + ldo7 { regulator-name = "nvvdd_ldo7,avddio_audio"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; - regulator@11 { - reg = <11>; - regulator-compatible = "ldo8"; + ldo8 { regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; - regulator@12 { - reg = <12>; - regulator-compatible = "ldo9"; + ldo9 { regulator-name = "nvvdd_ldo9,avdd_cam*"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - regulator@13 { - reg = <13>; - regulator-compatible = "ldo10"; + ldo10 { regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; }; - regulator@14 { - reg = <14>; - regulator-compatible = "ldo11"; + hdmi_vdd_reg: ldo11 { regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@15 { - reg = <15>; - regulator-compatible = "ldo12"; + ldo12 { regulator-name = "nvvdd_ldo12,vddio_sdio"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; - regulator@16 { - reg = <16>; - regulator-compatible = "ldo13"; + ldo13 { regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - regulator@17 { - reg = <17>; - regulator-compatible = "ldo14"; + ldo14 { regulator-name = "nvvdd_ldo14,avdd_vdac"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - regulator@18 { - reg = <18>; - regulator-compatible = "ldo15"; + ldo15 { regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - regulator@19 { - reg = <19>; - regulator-compatible = "ldo16"; + ldo16 { regulator-name = "nvvdd_ldo16,vdd_dbrtr"; regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; }; - regulator@20 { - reg = <20>; - regulator-compatible = "ldo17"; + ldo17 { regulator-name = "nvvdd_ldo17,vddio_mipi"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - regulator@21 { - reg = <21>; - regulator-compatible = "ldo18"; + ldo18 { regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@22 { - reg = <22>; - regulator-compatible = "ldo19"; + ldo19 { regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - regulator@23 { - reg = <23>; - regulator-compatible = "ldo20"; + ldo20 { regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - regulator@24 { - reg = <24>; - regulator-compatible = "out5v"; + out5v { regulator-name = "usb0_vbus_reg"; }; - regulator@25 { - reg = <25>; - regulator-compatible = "out33v"; + out33v { regulator-name = "pmu_out3v3"; }; - regulator@26 { - reg = <26>; - regulator-compatible = "bbat"; + bbat { regulator-name = "pmu_bbat"; regulator-min-microvolt = <2400000>; regulator-max-microvolt = <2400000>; regulator-always-on; }; - regulator@27 { - reg = <27>; - regulator-compatible = "sdby"; + sdby { regulator-name = "vdd_aon"; regulator-always-on; }; - regulator@28 { - reg = <28>; - regulator-compatible = "vrtc"; + vrtc { regulator-name = "vrtc,pmu_vccadc"; regulator-always-on; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index f3a09d0d45bc..fba998e3954a 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -4,6 +4,102 @@ compatible = "nvidia,tegra20"; interrupt-parent = <&intc>; + host1x { + compatible = "nvidia,tegra20-host1x", "simple-bus"; + reg = <0x50000000 0x00024000>; + interrupts = <0 65 0x04 /* mpcore syncpt */ + 0 67 0x04>; /* mpcore general */ + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x04000000>; + + mpe { + compatible = "nvidia,tegra20-mpe"; + reg = <0x54040000 0x00040000>; + interrupts = <0 68 0x04>; + }; + + vi { + compatible = "nvidia,tegra20-vi"; + reg = <0x54080000 0x00040000>; + interrupts = <0 69 0x04>; + }; + + epp { + compatible = "nvidia,tegra20-epp"; + reg = <0x540c0000 0x00040000>; + interrupts = <0 70 0x04>; + }; + + isp { + compatible = "nvidia,tegra20-isp"; + reg = <0x54100000 0x00040000>; + interrupts = <0 71 0x04>; + }; + + gr2d { + compatible = "nvidia,tegra20-gr2d"; + reg = <0x54140000 0x00040000>; + interrupts = <0 72 0x04>; + }; + + gr3d { + compatible = "nvidia,tegra20-gr3d"; + reg = <0x54180000 0x00040000>; + }; + + dc@54200000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <0 73 0x04>; + + rgb { + status = "disabled"; + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <0 74 0x04>; + + rgb { + status = "disabled"; + }; + }; + + hdmi { + compatible = "nvidia,tegra20-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <0 75 0x04>; + status = "disabled"; + }; + + tvo { + compatible = "nvidia,tegra20-tvo"; + reg = <0x542c0000 0x00040000>; + interrupts = <0 76 0x04>; + status = "disabled"; + }; + + dsi { + compatible = "nvidia,tegra20-dsi"; + reg = <0x54300000 0x00040000>; + status = "disabled"; + }; + }; + + cache-controller@50043000 { + compatible = "arm,pl310-cache"; + reg = <0x50043000 0x1000>; + arm,data-latency = <5 5 2>; + arm,tag-latency = <4 4 2>; + cache-unified; + cache-level = <2>; + }; + intc: interrupt-controller { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 @@ -138,6 +234,16 @@ status = "disabled"; }; + spi@7000c380 { + compatible = "nvidia,tegra20-sflash"; + reg = <0x7000c380 0x80>; + interrupts = <0 39 0x04>; + nvidia,dma-request-selector = <&apbdma 11>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c@7000c400 { compatible = "nvidia,tegra20-i2c"; reg = <0x7000c400 0x100>; @@ -165,6 +271,46 @@ status = "disabled"; }; + spi@7000d400 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d400 0x200>; + interrupts = <0 59 0x04>; + nvidia,dma-request-selector = <&apbdma 15>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000d600 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d600 0x200>; + interrupts = <0 82 0x04>; + nvidia,dma-request-selector = <&apbdma 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000d800 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d480 0x200>; + interrupts = <0 83 0x04>; + nvidia,dma-request-selector = <&apbdma 17>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000da00 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000da00 0x200>; + interrupts = <0 93 0x04>; + nvidia,dma-request-selector = <&apbdma 18>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pmc { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts index dd4222f00eca..adc88aa50eb6 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -83,5 +83,11 @@ gpio = <&gpio 83 0>; /* GPIO PK3 */ }; }; + + sdhci@78000400 { + status = "okay"; + power-gpios = <&gpio 28 0>; /* gpio PD4 */ + bus-width = <4>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index 0828f097ca86..08163e145d57 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -95,4 +95,10 @@ gpio = <&gpio 232 0>; /* GPIO PDD0 */ }; }; + + sdhci@78000400 { + status = "okay"; + power-gpios = <&gpio 27 0>; /* gpio PD3 */ + bus-width = <4>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index d10c9c5a3606..bdb2a660f376 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -52,6 +52,22 @@ nvidia,pull = <2>; nvidia,tristate = <0>; }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; sdmmc4_clk_pcc4 { nvidia,pins = "sdmmc4_clk_pcc4", "sdmmc4_rst_n_pcc3"; @@ -81,6 +97,15 @@ nvidia,pull = <0>; nvidia,tristate = <0>; }; + sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = <0>; + nvidia,pull-down-strength = <46>; + nvidia,pull-up-strength = <42>; + nvidia,slew-rate-rising = <1>; + nvidia,slew-rate-falling = <1>; + }; }; }; @@ -171,56 +196,41 @@ vccio-supply = <&vdd_ac_bat_reg>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - vdd1_reg: regulator@0 { - reg = <0>; - regulator-compatible = "vdd1"; + vdd1_reg: vdd1 { regulator-name = "vddio_ddr_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - vdd2_reg: regulator@1 { - reg = <1>; - regulator-compatible = "vdd2"; + vdd2_reg: vdd2 { regulator-name = "vdd_1v5_gen"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; - vddctrl_reg: regulator@2 { - reg = <2>; - regulator-compatible = "vddctrl"; + vddctrl_reg: vddctrl { regulator-name = "vdd_cpu,vdd_sys"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - vio_reg: regulator@3 { - reg = <3>; - regulator-compatible = "vio"; + vio_reg: vio { regulator-name = "vdd_1v8_gen"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - ldo1_reg: regulator@4 { - reg = <4>; - regulator-compatible = "ldo1"; + ldo1_reg: ldo1 { regulator-name = "vdd_pexa,vdd_pexb"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; }; - ldo2_reg: regulator@5 { - reg = <5>; - regulator-compatible = "ldo2"; + ldo2_reg: ldo2 { regulator-name = "vdd_sata,avdd_plle"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -228,44 +238,34 @@ /* LDO3 is not connected to anything */ - ldo4_reg: regulator@7 { - reg = <7>; - regulator-compatible = "ldo4"; + ldo4_reg: ldo4 { regulator-name = "vdd_rtc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - ldo5_reg: regulator@8 { - reg = <8>; - regulator-compatible = "ldo5"; + ldo5_reg: ldo5 { regulator-name = "vddio_sdmmc,avdd_vdac"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - ldo6_reg: regulator@9 { - reg = <9>; - regulator-compatible = "ldo6"; + ldo6_reg: ldo6 { regulator-name = "avdd_dsi_csi,pwrdet_mipi"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - ldo7_reg: regulator@10 { - reg = <10>; - regulator-compatible = "ldo7"; + ldo7_reg: ldo7 { regulator-name = "vdd_pllm,x,u,a_p_c_s"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - ldo8_reg: regulator@11 { - reg = <11>; - regulator-compatible = "ldo8"; + ldo8_reg: ldo8 { regulator-name = "vdd_ddr_hs"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -275,6 +275,16 @@ }; }; + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + spi-flash@1 { + compatible = "winbond,w25q32"; + reg = <1>; + spi-max-frequency = <20000000>; + }; + }; + ahub { i2s@70080400 { status = "okay"; @@ -409,6 +419,8 @@ regulator-name = "vdd_com"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; enable-active-high; gpio = <&gpio 24 0>; /* gpio PD0 */ vin-supply = <&sys_3v3_reg>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index df7f2270fc91..efa603d47a6a 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -4,6 +4,102 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&intc>; + host1x { + compatible = "nvidia,tegra30-host1x", "simple-bus"; + reg = <0x50000000 0x00024000>; + interrupts = <0 65 0x04 /* mpcore syncpt */ + 0 67 0x04>; /* mpcore general */ + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x04000000>; + + mpe { + compatible = "nvidia,tegra30-mpe"; + reg = <0x54040000 0x00040000>; + interrupts = <0 68 0x04>; + }; + + vi { + compatible = "nvidia,tegra30-vi"; + reg = <0x54080000 0x00040000>; + interrupts = <0 69 0x04>; + }; + + epp { + compatible = "nvidia,tegra30-epp"; + reg = <0x540c0000 0x00040000>; + interrupts = <0 70 0x04>; + }; + + isp { + compatible = "nvidia,tegra30-isp"; + reg = <0x54100000 0x00040000>; + interrupts = <0 71 0x04>; + }; + + gr2d { + compatible = "nvidia,tegra30-gr2d"; + reg = <0x54140000 0x00040000>; + interrupts = <0 72 0x04>; + }; + + gr3d { + compatible = "nvidia,tegra30-gr3d"; + reg = <0x54180000 0x00040000>; + }; + + dc@54200000 { + compatible = "nvidia,tegra30-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <0 73 0x04>; + + rgb { + status = "disabled"; + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra30-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <0 74 0x04>; + + rgb { + status = "disabled"; + }; + }; + + hdmi { + compatible = "nvidia,tegra30-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <0 75 0x04>; + status = "disabled"; + }; + + tvo { + compatible = "nvidia,tegra30-tvo"; + reg = <0x542c0000 0x00040000>; + interrupts = <0 76 0x04>; + status = "disabled"; + }; + + dsi { + compatible = "nvidia,tegra30-dsi"; + reg = <0x54300000 0x00040000>; + status = "disabled"; + }; + }; + + cache-controller@50043000 { + compatible = "arm,pl310-cache"; + reg = <0x50043000 0x1000>; + arm,data-latency = <6 6 2>; + arm,tag-latency = <5 5 2>; + cache-unified; + cache-level = <2>; + }; + intc: interrupt-controller { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 @@ -168,6 +264,66 @@ status = "disabled"; }; + spi@7000d400 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000d400 0x200>; + interrupts = <0 59 0x04>; + nvidia,dma-request-selector = <&apbdma 15>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000d600 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000d600 0x200>; + interrupts = <0 82 0x04>; + nvidia,dma-request-selector = <&apbdma 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000d800 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000d480 0x200>; + interrupts = <0 83 0x04>; + nvidia,dma-request-selector = <&apbdma 17>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000da00 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000da00 0x200>; + interrupts = <0 93 0x04>; + nvidia,dma-request-selector = <&apbdma 18>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000dc00 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000dc00 0x200>; + interrupts = <0 94 0x04>; + nvidia,dma-request-selector = <&apbdma 27>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000de00 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000de00 0x200>; + interrupts = <0 79 0x04>; + nvidia,dma-request-selector = <&apbdma 28>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pmc { compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; reg = <0x7000e400 0x400>; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index ff000172c93c..63411b036932 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -37,6 +37,24 @@ regulator-max-microvolt = <3150000>; }; + vusb1v5: regulator-vusb1v5 { + compatible = "ti,twl4030-vusb1v5"; + }; + + vusb1v8: regulator-vusb1v8 { + compatible = "ti,twl4030-vusb1v8"; + }; + + vusb3v1: regulator-vusb3v1 { + compatible = "ti,twl4030-vusb3v1"; + }; + + vsim: regulator-vsim { + compatible = "ti,twl4030-vsim"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + twl_gpio: gpio { compatible = "ti,twl4030-gpio"; gpio-controller; @@ -44,4 +62,13 @@ interrupt-controller; #interrupt-cells = <1>; }; + + twl4030-usb { + compatible = "ti,twl4030-usb"; + interrupts = <10>, <4>; + usb1v5-supply = <&vusb1v5>; + usb1v8-supply = <&vusb1v8>; + usb3v1-supply = <&vusb3v1>; + usb_mode = <1>; + }; }; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 123e2c40218a..9996cfc5ee80 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -86,4 +86,9 @@ clk32kg: regulator-clk32kg { compatible = "ti,twl6030-clk32kg"; }; + + twl_usb_comparator: usb-comparator { + compatible = "ti,twl6030-usb"; + interrupts = <4>, <10>; + }; }; diff --git a/arch/arm/boot/dts/u9540.dts b/arch/arm/boot/dts/u9540.dts new file mode 100644 index 000000000000..95892ec6c342 --- /dev/null +++ b/arch/arm/boot/dts/u9540.dts @@ -0,0 +1,72 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "dbx5x0.dtsi" + +/ { + model = "ST-Ericsson U9540 platform with Device Tree"; + compatible = "st-ericsson,u9540"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + soc-u9500 { + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&gpio7 6 0x4>; // 230 + cd-inverted; + + status = "okay"; + }; + + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + + status = "okay"; + }; + + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi new file mode 100644 index 000000000000..401c1262d4ed --- /dev/null +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/include/ "skeleton.dtsi" + +/ { + compatible = "xlnx,zynq-7000"; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + + intc: interrupt-controller@f8f01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0xF8F01000 0x1000>, + <0xF8F00100 0x100>; + }; + + L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xF8F02000 0x1000>; + arm,data-latency = <2 3 2>; + arm,tag-latency = <2 3 2>; + cache-unified; + cache-level = <2>; + }; + + uart0: uart@e0000000 { + compatible = "xlnx,xuartps"; + reg = <0xE0000000 0x1000>; + interrupts = <0 27 4>; + clock = <50000000>; + }; + + uart1: uart@e0001000 { + compatible = "xlnx,xuartps"; + reg = <0xE0001000 0x1000>; + interrupts = <0 50 4>; + clock = <50000000>; + }; + + slcr: slcr@f8000000 { + compatible = "xlnx,zynq-slcr"; + reg = <0xF8000000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ps_clk: ps_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* clock-frequency set in board-specific file */ + clock-output-names = "ps_clk"; + }; + armpll: armpll { + #clock-cells = <0>; + compatible = "xlnx,zynq-pll"; + clocks = <&ps_clk>; + reg = <0x100 0x110>; + clock-output-names = "armpll"; + }; + ddrpll: ddrpll { + #clock-cells = <0>; + compatible = "xlnx,zynq-pll"; + clocks = <&ps_clk>; + reg = <0x104 0x114>; + clock-output-names = "ddrpll"; + }; + iopll: iopll { + #clock-cells = <0>; + compatible = "xlnx,zynq-pll"; + clocks = <&ps_clk>; + reg = <0x108 0x118>; + clock-output-names = "iopll"; + }; + uart_clk: uart_clk { + #clock-cells = <1>; + compatible = "xlnx,zynq-periph-clock"; + clocks = <&iopll &armpll &ddrpll>; + reg = <0x154>; + clock-output-names = "uart0_ref_clk", + "uart1_ref_clk"; + }; + cpu_clk: cpu_clk { + #clock-cells = <1>; + compatible = "xlnx,zynq-cpu-clock"; + clocks = <&iopll &armpll &ddrpll>; + reg = <0x120 0x1C4>; + clock-output-names = "cpu_6x4x", + "cpu_3x2x", + "cpu_2x", + "cpu_1x"; + }; + }; + }; + + ttc0: ttc0@f8001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "xlnx,ttc"; + reg = <0xF8001000 0x1000>; + clocks = <&cpu_clk 3>; + clock-names = "cpu_1x"; + clock-ranges; + + ttc0_0: ttc0.0 { + status = "disabled"; + reg = <0>; + interrupts = <0 10 4>; + }; + ttc0_1: ttc0.1 { + status = "disabled"; + reg = <1>; + interrupts = <0 11 4>; + }; + ttc0_2: ttc0.2 { + status = "disabled"; + reg = <2>; + interrupts = <0 12 4>; + }; + }; + + ttc1: ttc1@f8002000 { + #interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "xlnx,ttc"; + reg = <0xF8002000 0x1000>; + clocks = <&cpu_clk 3>; + clock-names = "cpu_1x"; + clock-ranges; + + ttc1_0: ttc1.0 { + status = "disabled"; + reg = <0>; + interrupts = <0 37 4>; + }; + ttc1_1: ttc1.1 { + status = "disabled"; + reg = <1>; + interrupts = <0 38 4>; + }; + ttc1_2: ttc1.2 { + status = "disabled"; + reg = <2>; + interrupts = <0 39 4>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts deleted file mode 100644 index 37ca192fb193..000000000000 --- a/arch/arm/boot/dts/zynq-ep107.dts +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/dts-v1/; -/ { - model = "Xilinx Zynq EP107"; - compatible = "xlnx,zynq-ep107"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - - memory { - device_type = "memory"; - reg = <0x0 0x10000000>; - }; - - chosen { - bootargs = "console=ttyPS0,9600 root=/dev/ram rw initrd=0x800000,8M earlyprintk"; - linux,stdout-path = &uart0; - }; - - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - intc: interrupt-controller@f8f01000 { - interrupt-controller; - compatible = "arm,gic"; - reg = <0xF8F01000 0x1000>; - #interrupt-cells = <2>; - }; - - uart0: uart@e0000000 { - compatible = "xlnx,xuartps"; - reg = <0xE0000000 0x1000>; - interrupts = <59 0>; - clock = <50000000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts new file mode 100644 index 000000000000..c772942a399a --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2011 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq ZC702 Development Board"; + compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + chosen { + bootargs = "console=ttyPS1,115200 earlyprintk"; + }; + +}; + +&ps_clk { + clock-frequency = <33333330>; +}; + +&ttc0_0 { + status = "ok"; + compatible = "xlnx,ttc-counter-clocksource"; +}; + +&ttc0_1 { + status = "ok"; + compatible = "xlnx,ttc-counter-clockevent"; +}; diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 40db34cf2771..0b7ee92c5713 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -8,11 +8,19 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_DOVE=y CONFIG_MACH_DOVE_DB=y +CONFIG_MACH_CM_A510=y +CONFIG_MACH_DOVE_DT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_HIGHMEM=y +CONFIG_USE_OF=y +CONFIG_ATAGS=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y CONFIG_VFP=y CONFIG_NET=y CONFIG_PACKET=y @@ -62,6 +70,9 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -74,6 +85,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_DOVE=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MV=y CONFIG_DMADEVICES=y @@ -122,6 +145,7 @@ CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_MV_CESA=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 78ed575feb1a..f71302c3ac33 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -18,7 +18,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_MXC=y -CONFIG_ARCH_IMX_V4_V5=y +CONFIG_ARCH_MULTI_V4T=y +CONFIG_ARCH_MULTI_V5=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MX1ADS=y CONFIG_MACH_SCB9328=y CONFIG_MACH_APF9328=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 394ded624e37..44f117aab52c 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -17,6 +17,8 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MXC=y +CONFIG_ARCH_MULTI_V6=y +CONFIG_ARCH_MULTI_V7=y CONFIG_MACH_MX31LILLY=y CONFIG_MACH_MX31LITE=y CONFIG_MACH_PCM037=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 74eee0c78f28..93f3794ba5cb 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -27,6 +27,14 @@ CONFIG_MACH_GOFLEXNET_DT=y CONFIG_MACH_LSXL_DT=y CONFIG_MACH_IOMEGA_IX2_200_DT=y CONFIG_MACH_KM_KIRKWOOD_DT=y +CONFIG_MACH_INETSPACE_V2_DT=y +CONFIG_MACH_MPLCEC4_DT=y +CONFIG_MACH_NETSPACE_V2_DT=y +CONFIG_MACH_NETSPACE_MAX_V2_DT=y +CONFIG_MACH_NETSPACE_LITE_V2_DT=y +CONFIG_MACH_NETSPACE_MINI_V2_DT=y +CONFIG_MACH_OPENBLOCKS_A6_DT=y +CONFIG_MACH_TOPKICK_DT=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y CONFIG_MACH_DOCKSTAR=y @@ -40,6 +48,7 @@ CONFIG_MACH_D2NET_V2=y CONFIG_MACH_NET2BIG_V2=y CONFIG_MACH_NET5BIG_V2=y CONFIG_MACH_T5325=y +CONFIG_MACH_NSA310_DT=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PREEMPT=y CONFIG_AEABI=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 048aaca60814..7bf535104e26 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -61,6 +61,8 @@ CONFIG_MTD_NAND_GPMI_NAND=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_ENC28J60=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_SMSC95XX=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_WLAN is not set @@ -158,6 +160,10 @@ CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_15=y CONFIG_PRINTK_TIME=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index cd5e6ba9a54d..952430d9e2d9 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,7 +1,8 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_EXPERT=y # CONFIG_SLUB_DEBUG is not set CONFIG_PROFILING=y @@ -10,6 +11,8 @@ CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y CONFIG_ARCH_ORION5X=y CONFIG_MACH_DB88F5281=y CONFIG_MACH_RD88F5182=y @@ -24,7 +27,7 @@ CONFIG_MACH_TS409=y CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y CONFIG_MACH_MV2120=y -CONFIG_MACH_EDMINI_V2=y +CONFIG_MACH_EDMINI_V2_DT=y CONFIG_MACH_D2NET=y CONFIG_MACH_BIGDISK=y CONFIG_MACH_NET2BIG=y @@ -33,17 +36,13 @@ CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y CONFIG_MACH_RD88F5181L_FXO=y CONFIG_MACH_RD88F6183AP_GE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y CONFIG_FPE_NWFPE=y CONFIG_VFP=y -# CONFIG_SUSPEND is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -54,13 +53,10 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6131=y -CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_NET_PKTGEN=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -82,12 +78,11 @@ CONFIG_CHR_DEV_SG=m CONFIG_ATA=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_NET_PCI=y +CONFIG_NET_DSA_MV88E6131=y +CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_MV643XX_ETH=y -# CONFIG_NETDEV_10000 is not set +CONFIG_MARVELL_PHY=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -95,11 +90,12 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT is not set +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set @@ -109,10 +105,8 @@ CONFIG_GPIO_SYSFS=y CONFIG_SENSORS_LM75=y # CONFIG_VGA_ARB is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DATAFAB=y @@ -140,7 +134,6 @@ CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_EXT4_FS=m -CONFIG_INOTIFY=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -150,25 +143,18 @@ CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_ECB=m diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index da6845493caa..6fe7ede6f0c2 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -76,6 +76,7 @@ CONFIG_AB8500_CORE=y CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y # CONFIG_HID_SUPPORT is not set CONFIG_USB_GADGET=y CONFIG_AB8500_USB=y diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 23004847bb05..8ea02ac3ec1a 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -211,13 +211,6 @@ static inline void dma_free_writecombine(struct device *dev, size_t size, extern void __init init_dma_coherent_pool_size(unsigned long size); /* - * This can be called during boot to increase the size of the consistent - * DMA region above it's default value of 2MB. It must be called before the - * memory allocator is initialised, i.e. before any core_initcall. - */ -static inline void init_consistent_dma_size(unsigned long size) { } - -/* * For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic" * and utilize bounce buffers as needed to work around limited DMA windows. * diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S new file mode 100644 index 000000000000..0c4e17d4d359 --- /dev/null +++ b/arch/arm/include/debug/imx.S @@ -0,0 +1,74 @@ +/* arch/arm/mach-imx/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#define IMX6Q_UART1_BASE_ADDR 0x02020000 +#define IMX6Q_UART2_BASE_ADDR 0x021e8000 +#define IMX6Q_UART3_BASE_ADDR 0x021ec000 +#define IMX6Q_UART4_BASE_ADDR 0x021f0000 +#define IMX6Q_UART5_BASE_ADDR 0x021f4000 + +/* + * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion + * of IMX6Q_UART##n##_BASE_ADDR. + */ +#define IMX6Q_UART_BASE_ADDR(n) IMX6Q_UART##n##_BASE_ADDR +#define IMX6Q_UART_BASE(n) IMX6Q_UART_BASE_ADDR(n) +#define IMX6Q_DEBUG_UART_BASE IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT) + +#ifdef CONFIG_DEBUG_IMX1_UART +#define UART_PADDR 0x00206000 +#elif defined (CONFIG_DEBUG_IMX25_UART) +#define UART_PADDR 0x43f90000 +#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART) +#define UART_PADDR 0x1000a000 +#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART) +#define UART_PADDR 0x43f90000 +#elif defined (CONFIG_DEBUG_IMX51_UART) +#define UART_PADDR 0x73fbc000 +#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART) +#define UART_PADDR 0x53fbc000 +#elif defined (CONFIG_DEBUG_IMX6Q_UART) +#define UART_PADDR IMX6Q_DEBUG_UART_BASE +#endif + +/* + * FIXME: This is a copy of IMX_IO_P2V in hardware.h, and needs to + * stay sync with that. It's hard to maintain, and should be fixed + * globally for multi-platform build to use a fixed virtual address + * for low-level debug uart port across platforms. + */ +#define IMX_IO_P2V(x) ( \ + (((x) & 0x80000000) >> 7) | \ + (0xf4000000 + \ + (((x) & 0x50000000) >> 6) + \ + (((x) & 0x0b000000) >> 4) + \ + (((x) & 0x000fffff)))) + +#define UART_VADDR IMX_IO_P2V(UART_PADDR) + + .macro addruart, rp, rv, tmp + ldr \rp, =UART_PADDR @ physical + ldr \rv, =UART_VADDR @ virtual + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0x40] @ TXDATA + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #0x98] @ SR2 + tst \rd, #1 << 3 @ TXDC + beq 1002b @ wait until transmit done + .endm diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 84af1b506d92..b7ae124c16e5 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -343,7 +343,6 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = { static void __init at91sam9g45_map_io(void) { at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE); - init_consistent_dma_size(SZ_4M); } static void __init at91sam9g45_ioremap_registers(void) diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h index cd580a12e904..3069e4135573 100644 --- a/arch/arm/mach-at91/include/mach/atmel-mci.h +++ b/arch/arm/mach-at91/include/mach/atmel-mci.h @@ -14,11 +14,4 @@ struct mci_dma_data { #define slave_data_ptr(s) (&(s)->sdata) #define find_slave_dev(s) ((s)->sdata.dma_dev) -#define setup_dma_addr(s, t, r) do { \ - if (s) { \ - (s)->sdata.tx_reg = (t); \ - (s)->sdata.rx_reg = (r); \ - } \ -} while (0) - #endif /* __MACH_ATMEL_MCI_H */ diff --git a/arch/arm/mach-bcm2835/Makefile.boot b/arch/arm/mach-bcm2835/Makefile.boot index 2d30e17f5b69..b3271754e9fd 100644 --- a/arch/arm/mach-bcm2835/Makefile.boot +++ b/arch/arm/mach-bcm2835/Makefile.boot @@ -1,3 +1 @@ - zreladdr-y := 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 +zreladdr-y := 0x00008000 diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c index f6fea4933571..53e3842c9330 100644 --- a/arch/arm/mach-bcm2835/bcm2835.c +++ b/arch/arm/mach-bcm2835/bcm2835.c @@ -30,12 +30,12 @@ static struct map_desc io_map __initdata = { .type = MT_DEVICE }; -void __init bcm2835_map_io(void) +static void __init bcm2835_map_io(void) { iotable_init(&io_map, 1); } -void __init bcm2835_init(void) +static void __init bcm2835_init(void) { int ret; diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index f8eecb959413..0153950f6068 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -58,6 +58,14 @@ config ARCH_DAVINCI_TNETV107X comment "DaVinci Board Type" +config MACH_DA8XX_DT + bool "Support DA8XX platforms using device tree" + default y + depends on ARCH_DAVINCI_DA8XX + help + Say y here to include support for TI DaVinci DA850 based using + Flattened Device Tree. More information at Documentation/devicetree + config MACH_DAVINCI_EVM bool "TI DM644x EVM" default ARCH_DAVINCI_DM644x diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 2227effcb0e9..fb5c1aa98a63 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_AINTC) += irq.o obj-$(CONFIG_CP_INTC) += cp_intc.o # Board specific +obj-$(CONFIG_MACH_DA8XX_DT) += da8xx-dt.o obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o obj-$(CONFIG_MACH_NEUROS_OSD2) += board-neuros-osd2.o diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 88ebea89abdf..cdf8d0746e79 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -324,7 +324,7 @@ static __init void dm355_evm_init(void) if (IS_ERR(aemif)) WARN("%s: unable to get AEMIF clock\n", __func__); else - clk_enable(aemif); + clk_prepare_enable(aemif); platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 2f88103c6459..d41954507fc2 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -246,7 +246,7 @@ static __init void dm355_leopard_init(void) if (IS_ERR(aemif)) WARN("%s: unable to get AEMIF clock\n", __func__); else - clk_enable(aemif); + clk_prepare_enable(aemif); platform_add_devices(davinci_leopard_devices, ARRAY_SIZE(davinci_leopard_devices)); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 1b4a8adcfdc9..5d49c75388ca 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -478,7 +478,7 @@ static void __init evm_init_cpld(void) aemif_clk = clk_get(NULL, "aemif"); if (IS_ERR(aemif_clk)) return; - clk_enable(aemif_clk); + clk_prepare_enable(aemif_clk); if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE, "cpld") == NULL) @@ -489,7 +489,7 @@ static void __init evm_init_cpld(void) SECTION_SIZE); fail: pr_err("ERROR: can't map CPLD\n"); - clk_disable(aemif_clk); + clk_disable_unprepare(aemif_clk); return; } diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index f22572cee49d..a84dfcbc1154 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -776,7 +776,7 @@ static __init void davinci_evm_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; aemif_clk = clk_get(NULL, "aemif"); - clk_enable(aemif_clk); + clk_prepare_enable(aemif_clk); if (HAS_ATA) { if (HAS_NAND || HAS_NOR) diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 1dbf85beed1b..9211e8800c79 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -194,7 +194,7 @@ static int evm_led_setup(struct i2c_client *client, int gpio, while (ngpio--) { leds->gpio = gpio++; leds++; - }; + } evm_led_dev = platform_device_alloc("leds-gpio", 0); platform_device_add_data(evm_led_dev, &evm_led_data, diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 144bf31d68dd..3e3e3afebf88 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -188,7 +188,7 @@ static __init void davinci_ntosd2_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; aemif_clk = clk_get(NULL, "aemif"); - clk_enable(aemif_clk); + clk_prepare_enable(aemif_clk); if (HAS_ATA) { if (HAS_NAND) diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index 64b0f65a8639..a794f6d9d444 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -87,8 +87,6 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) iotable_init(davinci_soc_info.io_desc, davinci_soc_info.io_desc_num); - init_consistent_dma_size(14 << 20); - /* * Normally devicemaps_init() would flush caches and tlb after * mdesc->map_io(), but we must also do it here because of the CPU diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index b90c172d5541..68c5fe01857c 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -212,6 +212,12 @@ static struct clk tptc2_clk = { .flags = ALWAYS_ENABLED, }; +static struct clk pruss_clk = { + .name = "pruss", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_PRUSS, +}; + static struct clk uart0_clk = { .name = "uart0", .parent = &pll0_sysclk2, @@ -385,6 +391,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "tptc1", &tptc1_clk), CLK(NULL, "tpcc1", &tpcc1_clk), CLK(NULL, "tptc2", &tptc2_clk), + CLK("pruss_uio", "pruss", &pruss_clk), CLK(NULL, "uart0", &uart0_clk), CLK(NULL, "uart1", &uart1_clk), CLK(NULL, "uart2", &uart2_clk), @@ -781,12 +788,6 @@ static struct map_desc da850_io_desc[] = { .length = DA8XX_CP_INTC_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(DA8XX_ARM_RAM_BASE), - .length = SZ_8K, - .type = MT_DEVICE - }, }; static u32 da850_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE }; @@ -1239,8 +1240,8 @@ static struct davinci_soc_info davinci_soc_info_da850 = { .gpio_irq = IRQ_DA8XX_GPIO0, .serial_dev = &da8xx_serial_device, .emac_pdata = &da8xx_emac_pdata, - .sram_dma = DA8XX_ARM_RAM_BASE, - .sram_len = SZ_8K, + .sram_dma = DA8XX_SHARED_RAM_BASE, + .sram_len = SZ_128K, }; void __init da850_init(void) diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c new file mode 100644 index 000000000000..37c27af18fa0 --- /dev/null +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * Modified from mach-omap/omap2/board-generic.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/io.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/irqdomain.h> + +#include <asm/mach/arch.h> + +#include <mach/common.h> +#include <mach/cp_intc.h> +#include <mach/da8xx.h> + +#define DA8XX_NUM_UARTS 3 + +void __init da8xx_uart_clk_enable(void) +{ + int i; + for (i = 0; i < DA8XX_NUM_UARTS; i++) + davinci_serial_setup_clk(i, NULL); +} + +static struct of_device_id da8xx_irq_match[] __initdata = { + { .compatible = "ti,cp-intc", .data = cp_intc_of_init, }, + { } +}; + +static void __init da8xx_init_irq(void) +{ + of_irq_init(da8xx_irq_match); +} + +#ifdef CONFIG_ARCH_DAVINCI_DA850 + +static void __init da850_init_machine(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + + da8xx_uart_clk_enable(); +} + +static const char *da850_boards_compat[] __initdata = { + "enbw,cmc", + "ti,da850-evm", + "ti,da850", + NULL, +}; + +DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x") + .map_io = da850_init, + .init_irq = da8xx_init_irq, + .timer = &davinci_timer, + .init_machine = da850_init_machine, + .dt_compat = da850_boards_compat, + .init_late = davinci_init_late, + .restart = da8xx_restart, +MACHINE_END + +#endif diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index bd2f72b414bc..46c9a0c09ae5 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -22,6 +22,7 @@ #include <mach/time.h> #include <mach/da8xx.h> #include <mach/cpuidle.h> +#include <mach/sram.h> #include "clock.h" #include "asp.h" @@ -32,6 +33,7 @@ #define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ #define DA8XX_I2C0_BASE 0x01c22000 #define DA8XX_RTC_BASE 0x01c23000 +#define DA8XX_PRUSS_MEM_BASE 0x01c30000 #define DA8XX_MMCSD0_BASE 0x01c40000 #define DA8XX_SPI0_BASE 0x01c41000 #define DA830_SPI1_BASE 0x01e12000 @@ -518,6 +520,75 @@ void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) } } +static struct resource da8xx_pruss_resources[] = { + { + .start = DA8XX_PRUSS_MEM_BASE, + .end = DA8XX_PRUSS_MEM_BASE + 0xFFFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DA8XX_EVTOUT0, + .end = IRQ_DA8XX_EVTOUT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT1, + .end = IRQ_DA8XX_EVTOUT1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT2, + .end = IRQ_DA8XX_EVTOUT2, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT3, + .end = IRQ_DA8XX_EVTOUT3, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT4, + .end = IRQ_DA8XX_EVTOUT4, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT5, + .end = IRQ_DA8XX_EVTOUT5, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT6, + .end = IRQ_DA8XX_EVTOUT6, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT7, + .end = IRQ_DA8XX_EVTOUT7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct uio_pruss_pdata da8xx_uio_pruss_pdata = { + .pintc_base = 0x4000, +}; + +static struct platform_device da8xx_uio_pruss_dev = { + .name = "pruss_uio", + .id = -1, + .num_resources = ARRAY_SIZE(da8xx_pruss_resources), + .resource = da8xx_pruss_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &da8xx_uio_pruss_pdata, + } +}; + +int __init da8xx_register_uio_pruss(void) +{ + da8xx_uio_pruss_pdata.sram_pool = sram_get_gen_pool(); + return platform_device_register(&da8xx_uio_pruss_dev); +} + static const struct display_panel disp_panel = { QVGA, 16, @@ -900,7 +971,7 @@ static int da850_sata_init(struct device *dev, void __iomem *addr) if (IS_ERR(da850_sata_clk)) return PTR_ERR(da850_sata_clk); - ret = clk_enable(da850_sata_clk); + ret = clk_prepare_enable(da850_sata_clk); if (ret) goto err0; @@ -931,7 +1002,7 @@ static int da850_sata_init(struct device *dev, void __iomem *addr) return 0; err1: - clk_disable(da850_sata_clk); + clk_disable_unprepare(da850_sata_clk); err0: clk_put(da850_sata_clk); return ret; @@ -939,7 +1010,7 @@ err0: static void da850_sata_exit(struct device *dev) { - clk_disable(da850_sata_clk); + clk_disable_unprepare(da850_sata_clk); clk_put(da850_sata_clk); } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index a255434908db..b49c3b77d55e 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -758,12 +758,6 @@ static struct map_desc dm355_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00010000), - .length = SZ_32K, - .type = MT_MEMORY_NONCACHED, - }, }; /* Contents of JTAG ID register used to identify exact cpu type */ diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index b680c832e0ba..6c3980540be0 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -985,12 +985,6 @@ static struct map_desc dm365_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00010000), - .length = SZ_32K, - .type = MT_MEMORY_NONCACHED, - }, }; static struct resource dm365_ks_resources[] = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index cd0c8b1e1ecf..11c79a3362ef 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -713,8 +713,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, break; case VPBE_ENC_CUSTOM_TIMINGS: if (pclock <= 27000000) { - v |= DM644X_VPSS_MUXSEL_PLL2_MODE | - DM644X_VPSS_DACCLKEN; + v |= DM644X_VPSS_DACCLKEN; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); } else { /* @@ -786,12 +785,6 @@ static struct map_desc dm644x_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00008000), - .length = SZ_16K, - .type = MT_MEMORY_NONCACHED, - }, }; /* Contents of JTAG ID register used to identify exact cpu type */ diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 97c0f8e555bd..ac7b431c4c8e 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -756,12 +756,6 @@ static struct map_desc dm646x_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00010000), - .length = SZ_32K, - .type = MT_MEMORY_NONCACHED, - }, }; /* Contents of JTAG ID register used to identify exact cpu type */ diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index bdc4aa8e672a..046c7238a3d6 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -104,8 +104,6 @@ int davinci_pm_init(void); static inline int davinci_pm_init(void) { return 0; } #endif -/* standard place to map on-chip SRAMs; they *may* support DMA */ -#define SRAM_VIRT 0xfffe0000 #define SRAM_SIZE SZ_128K #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */ diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index aaccdc4528fc..700d311c6854 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -26,6 +26,7 @@ #include <linux/platform_data/mmc-davinci.h> #include <linux/platform_data/usb-davinci.h> #include <linux/platform_data/spi-davinci.h> +#include <linux/platform_data/uio_pruss.h> #include <media/davinci/vpif_types.h> @@ -72,6 +73,7 @@ extern unsigned int da850_max_speed; #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 #define DA8XX_AEMIF_CTL_BASE 0x68000000 +#define DA8XX_SHARED_RAM_BASE 0x80000000 #define DA8XX_ARM_RAM_BASE 0xffff0000 void __init da830_init(void); @@ -86,6 +88,7 @@ int da8xx_register_watchdog(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); int da8xx_register_emac(void); +int da8xx_register_uio_pruss(void); int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata); int da8xx_register_mmcsd0(struct davinci_mmc_config *config); int da850_register_mmcsd1(struct davinci_mmc_config *config); diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 46b3cd11c3c2..2d9d921e8b01 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -43,6 +43,7 @@ struct davinci_uart_config { }; extern int davinci_serial_init(struct davinci_uart_config *); +extern int davinci_serial_setup_clk(unsigned instance, unsigned int *rate); #endif #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h index 111f7cc71e07..4e5db56218b8 100644 --- a/arch/arm/mach-davinci/include/mach/sram.h +++ b/arch/arm/mach-davinci/include/mach/sram.h @@ -24,4 +24,7 @@ extern void *sram_alloc(size_t len, dma_addr_t *dma); extern void sram_free(void *addr, size_t len); +/* Get the struct gen_pool * for use in platform data */ +extern struct gen_pool *sram_get_gen_pool(void); + #endif /* __MACH_SRAM_H */ diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 1875740fe27c..f2625814c3c9 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -70,11 +70,33 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p) UART_DM646X_SCR_TX_WATERMARK); } -int __init davinci_serial_init(struct davinci_uart_config *info) +/* Enable UART clock and obtain its rate */ +int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate) { - int i; char name[16]; - struct clk *uart_clk; + struct clk *clk; + struct davinci_soc_info *soc_info = &davinci_soc_info; + struct device *dev = &soc_info->serial_dev->dev; + + sprintf(name, "uart%d", instance); + clk = clk_get(dev, name); + if (IS_ERR(clk)) { + pr_err("%s:%d: failed to get UART%d clock\n", + __func__, __LINE__, instance); + return PTR_ERR(clk); + } + + clk_prepare_enable(clk); + + if (rate) + *rate = clk_get_rate(clk); + + return 0; +} + +int __init davinci_serial_init(struct davinci_uart_config *info) +{ + int i, ret; struct davinci_soc_info *soc_info = &davinci_soc_info; struct device *dev = &soc_info->serial_dev->dev; struct plat_serial8250_port *p = dev->platform_data; @@ -87,16 +109,9 @@ int __init davinci_serial_init(struct davinci_uart_config *info) if (!(info->enabled_uarts & (1 << i))) continue; - sprintf(name, "uart%d", i); - uart_clk = clk_get(dev, name); - if (IS_ERR(uart_clk)) { - printk(KERN_ERR "%s:%d: failed to get UART%d clock\n", - __func__, __LINE__, i); + ret = davinci_serial_setup_clk(i, &p->uartclk); + if (ret) continue; - } - - clk_enable(uart_clk); - p->uartclk = clk_get_rate(uart_clk); if (!p->membase && p->mapbase) { p->membase = ioremap(p->mapbase, SZ_4K); diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index db0f7787faf1..c5f7ee5cc80a 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c @@ -10,6 +10,7 @@ */ #include <linux/module.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/genalloc.h> #include <mach/common.h> @@ -17,6 +18,11 @@ static struct gen_pool *sram_pool; +struct gen_pool *sram_get_gen_pool(void) +{ + return sram_pool; +} + void *sram_alloc(size_t len, dma_addr_t *dma) { unsigned long vaddr; @@ -32,7 +38,7 @@ void *sram_alloc(size_t len, dma_addr_t *dma) return NULL; if (dma) - *dma = dma_base + (vaddr - SRAM_VIRT); + *dma = gen_pool_virt_to_phys(sram_pool, vaddr); return (void *)vaddr; } @@ -53,8 +59,10 @@ EXPORT_SYMBOL(sram_free); */ static int __init sram_init(void) { + phys_addr_t phys = davinci_soc_info.sram_dma; unsigned len = davinci_soc_info.sram_len; int status = 0; + void *addr; if (len) { len = min_t(unsigned, len, SRAM_SIZE); @@ -62,8 +70,17 @@ static int __init sram_init(void) if (!sram_pool) status = -ENOMEM; } - if (sram_pool) - status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1); + + if (sram_pool) { + addr = ioremap(phys, len); + if (!addr) + return -ENOMEM; + status = gen_pool_add_virt(sram_pool, (unsigned)addr, + phys, len, -1); + if (status < 0) + iounmap(addr); + } + WARN_ON(status < 0); return status; } diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 75da315b6587..9847938785ca 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -379,7 +379,7 @@ static void __init davinci_timer_init(void) timer_clk = clk_get(NULL, "timer0"); BUG_ON(IS_ERR(timer_clk)); - clk_enable(timer_clk); + clk_prepare_enable(timer_clk); /* init timer hw */ timer_init(); @@ -429,7 +429,7 @@ void davinci_watchdog_reset(struct platform_device *pdev) wd_clk = clk_get(&pdev->dev, NULL); if (WARN_ON(IS_ERR(wd_clk))) return; - clk_enable(wd_clk); + clk_prepare_enable(wd_clk); /* disable, internal clock source */ __raw_writel(0, base + TCR); diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index f77b95336e2b..34509ffba221 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -42,14 +42,8 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data usb_data = { -#if defined(CONFIG_USB_MUSB_OTG) /* OTG requires a Mini-AB connector */ .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_PERIPHERAL) - .mode = MUSB_PERIPHERAL, -#elif defined(CONFIG_USB_MUSB_HOST) - .mode = MUSB_HOST, -#endif .clock = "usb", .config = &musb_config, }; diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index da55107033dd..bb3b09aa9183 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -63,6 +63,7 @@ config SOC_EXYNOS5250 depends on ARCH_EXYNOS5 select S5P_PM if PM select S5P_SLEEP if PM + select S5P_DEV_MFC select SAMSUNG_DMADEV help Enable EXYNOS5250 SoC support diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 9b58024f7d43..1797dee88a0d 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -53,7 +53,6 @@ obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o -obj-$(CONFIG_EXYNOS_DEV_DRM) += dev-drm.o obj-$(CONFIG_EXYNOS_DEV_SYSMMU) += dev-sysmmu.o obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index 6a45c9a9abe9..efead60b9436 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -576,6 +576,10 @@ static struct clk exynos4_init_clocks_off[] = { .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 15), }, { + .name = "tmu_apbif", + .enable = exynos4_clk_ip_perir_ctrl, + .ctrlbit = (1 << 17), + }, { .name = "keypad", .enable = exynos4_clk_ip_perir_ctrl, .ctrlbit = (1 << 16), @@ -613,11 +617,6 @@ static struct clk exynos4_init_clocks_off[] = { .ctrlbit = (1 << 18), }, { .name = "iis", - .devname = "samsung-i2s.0", - .enable = exynos4_clk_ip_peril_ctrl, - .ctrlbit = (1 << 19), - }, { - .name = "iis", .devname = "samsung-i2s.1", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 20), diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index c44ca1ee1b8d..7652f5d78a56 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -196,6 +196,11 @@ static int exynos5_clk_ip_isp1_ctrl(struct clk *clk, int enable) return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable); } +static int exynos5_clk_hdmiphy_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); +} + /* Core list of CMU_CPU side */ static struct clksrc_clk exynos5_clk_mout_apll = { @@ -292,7 +297,7 @@ static struct clksrc_sources exynos5_clk_src_mpll = { .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_list), }; -struct clksrc_clk exynos5_clk_mout_mpll = { +static struct clksrc_clk exynos5_clk_mout_mpll = { .clk = { .name = "mout_mpll", }, @@ -467,12 +472,12 @@ static struct clksrc_clk exynos5_clk_pclk_acp = { /* Core list of CMU_TOP side */ -struct clk *exynos5_clkset_aclk_top_list[] = { +static struct clk *exynos5_clkset_aclk_top_list[] = { [0] = &exynos5_clk_mout_mpll_user.clk, [1] = &exynos5_clk_mout_bpll_user.clk, }; -struct clksrc_sources exynos5_clkset_aclk = { +static struct clksrc_sources exynos5_clkset_aclk = { .sources = exynos5_clkset_aclk_top_list, .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_top_list), }; @@ -486,12 +491,12 @@ static struct clksrc_clk exynos5_clk_aclk_400 = { .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 }, }; -struct clk *exynos5_clkset_aclk_333_166_list[] = { +static struct clk *exynos5_clkset_aclk_333_166_list[] = { [0] = &exynos5_clk_mout_cpll.clk, [1] = &exynos5_clk_mout_mpll_user.clk, }; -struct clksrc_sources exynos5_clkset_aclk_333_166 = { +static struct clksrc_sources exynos5_clkset_aclk_333_166 = { .sources = exynos5_clkset_aclk_333_166_list, .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_333_166_list), }; @@ -616,6 +621,11 @@ static struct clk exynos5_init_clocks_off[] = { .enable = exynos5_clk_ip_peric_ctrl, .ctrlbit = (1 << 24), }, { + .name = "tmu_apbif", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peris_ctrl, + .ctrlbit = (1 << 21), + }, { .name = "rtc", .parent = &exynos5_clk_aclk_66.clk, .enable = exynos5_clk_ip_peris_ctrl, @@ -664,17 +674,22 @@ static struct clk exynos5_init_clocks_off[] = { .ctrlbit = (1 << 25), }, { .name = "mfc", - .devname = "s5p-mfc", + .devname = "s5p-mfc-v6", .enable = exynos5_clk_ip_mfc_ctrl, .ctrlbit = (1 << 0), }, { .name = "hdmi", - .devname = "exynos4-hdmi", + .devname = "exynos5-hdmi", .enable = exynos5_clk_ip_disp1_ctrl, .ctrlbit = (1 << 6), }, { + .name = "hdmiphy", + .devname = "exynos5-hdmi", + .enable = exynos5_clk_hdmiphy_ctrl, + .ctrlbit = (1 << 0), + }, { .name = "mixer", - .devname = "s5p-mixer", + .devname = "exynos5-mixer", .enable = exynos5_clk_ip_disp1_ctrl, .ctrlbit = (1 << 5), }, { @@ -966,7 +981,7 @@ static struct clk exynos5_clk_fimd1 = { .ctrlbit = (1 << 0), }; -struct clk *exynos5_clkset_group_list[] = { +static struct clk *exynos5_clkset_group_list[] = { [0] = &clk_ext_xtal_mux, [1] = NULL, [2] = &exynos5_clk_sclk_hdmi24m, @@ -979,7 +994,7 @@ struct clk *exynos5_clkset_group_list[] = { [9] = &exynos5_clk_mout_cpll.clk, }; -struct clksrc_sources exynos5_clkset_group = { +static struct clksrc_sources exynos5_clkset_group = { .sources = exynos5_clkset_group_list, .nr_sources = ARRAY_SIZE(exynos5_clkset_group_list), }; @@ -1195,7 +1210,7 @@ static struct clksrc_clk exynos5_clk_sclk_spi2 = { .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 }, }; -struct clksrc_clk exynos5_clk_sclk_fimd1 = { +static struct clksrc_clk exynos5_clk_sclk_fimd1 = { .clk = { .name = "sclk_fimd", .devname = "exynos5-fb.1", @@ -1476,7 +1491,7 @@ static void exynos5_clock_resume(void) #define exynos5_clock_resume NULL #endif -struct syscore_ops exynos5_clock_syscore_ops = { +static struct syscore_ops exynos5_clock_syscore_ops = { .suspend = exynos5_clock_suspend, .resume = exynos5_clock_resume, }; diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 8dd19c696a60..454bc6ed9a8d 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -63,7 +63,7 @@ static void exynos4_map_io(void); static void exynos5_map_io(void); static void exynos4_init_clocks(int xtal); static void exynos5_init_clocks(int xtal); -static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no); +static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no); static int exynos_init(void); static struct cpu_table cpu_ids[] __initdata = { @@ -72,7 +72,7 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, - .init_uarts = exynos_init_uarts, + .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4210, }, { @@ -80,7 +80,7 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, - .init_uarts = exynos_init_uarts, + .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4212, }, { @@ -88,7 +88,7 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS4_CPU_MASK, .map_io = exynos4_map_io, .init_clocks = exynos4_init_clocks, - .init_uarts = exynos_init_uarts, + .init_uarts = exynos4_init_uarts, .init = exynos_init, .name = name_exynos4412, }, { @@ -96,7 +96,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idmask = EXYNOS5_SOC_MASK, .map_io = exynos5_map_io, .init_clocks = exynos5_init_clocks, - .init_uarts = exynos_init_uarts, .init = exynos_init, .name = name_exynos5250, }, @@ -257,25 +256,10 @@ static struct map_desc exynos5_iodesc[] __initdata = { .length = SZ_64K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_COMBINER_BASE, - .pfn = __phys_to_pfn(EXYNOS5_PA_COMBINER), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S3C_VA_UART, .pfn = __phys_to_pfn(EXYNOS5_PA_UART), .length = SZ_512K, .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GIC_CPU, - .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_CPU), - .length = SZ_8K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GIC_DIST, - .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_DIST), - .length = SZ_4K, - .type = MT_DEVICE, }, }; @@ -354,23 +338,6 @@ static void __init exynos4_map_io(void) static void __init exynos5_map_io(void) { iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); - - s3c_device_i2c0.resource[0].start = EXYNOS5_PA_IIC(0); - s3c_device_i2c0.resource[0].end = EXYNOS5_PA_IIC(0) + SZ_4K - 1; - s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC; - s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC; - - s3c_sdhci_setname(0, "exynos4-sdhci"); - s3c_sdhci_setname(1, "exynos4-sdhci"); - s3c_sdhci_setname(2, "exynos4-sdhci"); - s3c_sdhci_setname(3, "exynos4-sdhci"); - - /* The I2C bus controllers are directly compatible with s3c2440 */ - s3c_i2c0_setname("s3c2440-i2c"); - s3c_i2c1_setname("s3c2440-i2c"); - s3c_i2c2_setname("s3c2440-i2c"); - - s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos4_init_clocks(int xtal) @@ -589,7 +556,8 @@ static void __init combiner_init(void __iomem *combiner_base, } #ifdef CONFIG_OF -int __init combiner_of_init(struct device_node *np, struct device_node *parent) +static int __init combiner_of_init(struct device_node *np, + struct device_node *parent) { void __iomem *combiner_base; @@ -729,7 +697,7 @@ static int __init exynos_init(void) /* uart registration process */ -static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no) +static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) { struct s3c2410_uartcfg *tcfg = cfg; u32 ucnt; @@ -737,10 +705,7 @@ static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no) for (ucnt = 0; ucnt < no; ucnt++, tcfg++) tcfg->has_fracval = 1; - if (soc_is_exynos5250()) - s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no); - else - s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no); + s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no); } static void __iomem *exynos_eint_base; @@ -972,14 +937,7 @@ static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) struct irq_chip *chip = irq_get_chip(irq); chained_irq_enter(chip, desc); - chip->irq_mask(&desc->irq_data); - - if (chip->irq_ack) - chip->irq_ack(&desc->irq_data); - generic_handle_irq(*irq_data); - - chip->irq_unmask(&desc->irq_data); chained_irq_exit(chip, desc); } @@ -999,11 +957,14 @@ static int __init exynos_init_irq_eint(void) * platforms switch over to using the pinctrl driver, the wakeup * interrupt support code here can be completely removed. */ + static const struct of_device_id exynos_pinctrl_ids[] = { + { .compatible = "samsung,pinctrl-exynos4210", }, + { .compatible = "samsung,pinctrl-exynos4x12", }, + }; struct device_node *pctrl_np, *wkup_np; - const char *pctrl_compat = "samsung,pinctrl-exynos4210"; const char *wkup_compat = "samsung,exynos4210-wakeup-eint"; - for_each_compatible_node(pctrl_np, NULL, pctrl_compat) { + for_each_matching_node(pctrl_np, exynos_pinctrl_ids) { if (of_device_is_available(pctrl_np)) { wkup_np = of_find_compatible_node(pctrl_np, NULL, wkup_compat); diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c index ae321c7cb15f..a1cb42c39590 100644 --- a/arch/arm/mach-exynos/dev-audio.c +++ b/arch/arm/mach-exynos/dev-audio.c @@ -14,9 +14,9 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/gpio.h> +#include <linux/platform_data/asoc-s3c.h> #include <plat/gpio-cfg.h> -#include <linux/platform_data/asoc-s3c.h> #include <mach/map.h> #include <mach/dma.h> diff --git a/arch/arm/mach-exynos/dev-drm.c b/arch/arm/mach-exynos/dev-drm.c deleted file mode 100644 index 17c9c6ecc2e0..000000000000 --- a/arch/arm/mach-exynos/dev-drm.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/arch/arm/mach-exynos/dev-drm.c - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - core DRM device - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> - -#include <plat/devs.h> - -static u64 exynos_drm_dma_mask = DMA_BIT_MASK(32); - -struct platform_device exynos_device_drm = { - .name = "exynos-drm", - .dev = { - .dma_mask = &exynos_drm_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - } -}; diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c index 14ed7951a2c6..4244d02dafbd 100644 --- a/arch/arm/mach-exynos/dev-ohci.c +++ b/arch/arm/mach-exynos/dev-ohci.c @@ -12,10 +12,10 @@ #include <linux/dma-mapping.h> #include <linux/platform_device.h> +#include <linux/platform_data/usb-exynos.h> #include <mach/irqs.h> #include <mach/map.h> -#include <linux/platform_data/usb-exynos.h> #include <plat/devs.h> #include <plat/usb-phy.h> diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c index 2e85c022fd16..7c42f4b7c8be 100644 --- a/arch/arm/mach-exynos/dev-uart.c +++ b/arch/arm/mach-exynos/dev-uart.c @@ -52,27 +52,3 @@ struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = { .nr_resources = ARRAY_SIZE(exynos4_uart3_resource), }, }; - -EXYNOS_UART_RESOURCE(5, 0) -EXYNOS_UART_RESOURCE(5, 1) -EXYNOS_UART_RESOURCE(5, 2) -EXYNOS_UART_RESOURCE(5, 3) - -struct s3c24xx_uart_resources exynos5_uart_resources[] __initdata = { - [0] = { - .resources = exynos5_uart0_resource, - .nr_resources = ARRAY_SIZE(exynos5_uart0_resource), - }, - [1] = { - .resources = exynos5_uart1_resource, - .nr_resources = ARRAY_SIZE(exynos5_uart0_resource), - }, - [2] = { - .resources = exynos5_uart2_resource, - .nr_resources = ARRAY_SIZE(exynos5_uart2_resource), - }, - [3] = { - .resources = exynos5_uart3_resource, - .nr_resources = ARRAY_SIZE(exynos5_uart3_resource), - }, -}; diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index 21d568b3b149..87e07d6fc615 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -275,6 +275,9 @@ static int __init exynos_dma_init(void) exynos_pdma1_pdata.nr_valid_peri = ARRAY_SIZE(exynos4210_pdma1_peri); exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri; + + if (samsung_rev() == EXYNOS4210_REV_0) + exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1; } else if (soc_is_exynos4212() || soc_is_exynos4412()) { exynos_pdma0_pdata.nr_valid_peri = ARRAY_SIZE(exynos4212_pdma0_peri); diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 35bced6f9092..5d44616c2014 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -136,6 +136,9 @@ #define EXYNOS4_IRQ_TSI IRQ_SPI(115) #define EXYNOS4_IRQ_SATA IRQ_SPI(116) +#define EXYNOS4_IRQ_TMU_TRIG0 COMBINER_IRQ(2, 4) +#define EXYNOS4_IRQ_TMU_TRIG1 COMBINER_IRQ(3, 4) + #define EXYNOS4_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0) #define EXYNOS4_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1) #define EXYNOS4_IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2) @@ -259,11 +262,6 @@ #define EXYNOS5_IRQ_IEM_IEC IRQ_SPI(48) #define EXYNOS5_IRQ_IEM_APC IRQ_SPI(49) #define EXYNOS5_IRQ_GPIO_C2C IRQ_SPI(50) -#define EXYNOS5_IRQ_UART0 IRQ_SPI(51) -#define EXYNOS5_IRQ_UART1 IRQ_SPI(52) -#define EXYNOS5_IRQ_UART2 IRQ_SPI(53) -#define EXYNOS5_IRQ_UART3 IRQ_SPI(54) -#define EXYNOS5_IRQ_UART4 IRQ_SPI(55) #define EXYNOS5_IRQ_IIC IRQ_SPI(56) #define EXYNOS5_IRQ_IIC1 IRQ_SPI(57) #define EXYNOS5_IRQ_IIC2 IRQ_SPI(58) diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 8480849affb9..9f180aa3a848 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -88,8 +88,11 @@ #define EXYNOS4_PA_TWD 0x10500600 #define EXYNOS4_PA_L2CC 0x10502000 +#define EXYNOS4_PA_TMU 0x100C0000 + #define EXYNOS4_PA_MDMA0 0x10810000 #define EXYNOS4_PA_MDMA1 0x12850000 +#define EXYNOS4_PA_S_MDMA1 0x12840000 #define EXYNOS4_PA_PDMA0 0x12680000 #define EXYNOS4_PA_PDMA1 0x12690000 #define EXYNOS5_PA_MDMA0 0x10800000 @@ -279,7 +282,6 @@ #define EXYNOS5_PA_UART1 0x12C10000 #define EXYNOS5_PA_UART2 0x12C20000 #define EXYNOS5_PA_UART3 0x12C30000 -#define EXYNOS5_SZ_UART SZ_256 #define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h index d4e392b811a3..70b2795f5283 100644 --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h @@ -230,8 +230,6 @@ /* For EXYNOS5 */ -#define EXYNOS5_USB_CFG S5P_PMUREG(0x0230) - #define EXYNOS5_AUTO_WDTRESET_DISABLE S5P_PMUREG(0x0408) #define EXYNOS5_MASK_WDTRESET_REQUEST S5P_PMUREG(0x040C) diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index eadf4b59e7d2..8858068d2b6a 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -77,6 +77,8 @@ static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = { "exynos4210-spi.2", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU, + "exynos-tmu", NULL), {}, }; @@ -94,6 +96,8 @@ static void __init exynos4_dt_machine_init(void) static char const *exynos4_dt_compat[] __initdata = { "samsung,exynos4210", + "samsung,exynos4212", + "samsung,exynos4412", NULL }; diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index db1cd8eacf28..25f464cf7979 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -11,6 +11,8 @@ #include <linux/of_platform.h> #include <linux/serial_core.h> +#include <linux/memblock.h> +#include <linux/of_fdt.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -18,6 +20,7 @@ #include <plat/cpu.h> #include <plat/regs-serial.h> +#include <plat/mfc.h> #include "common.h" @@ -47,6 +50,20 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "s3c2440-i2c.0", NULL), OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1), "s3c2440-i2c.1", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(2), + "s3c2440-i2c.2", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(3), + "s3c2440-i2c.3", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(4), + "s3c2440-i2c.4", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(5), + "s3c2440-i2c.5", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(6), + "s3c2440-i2c.6", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(7), + "s3c2440-i2c.7", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-hdmiphy-i2c", EXYNOS5_PA_IIC(8), + "s3c2440-hdmiphy-i2c", NULL), OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0, "dw_mmc.0", NULL), OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1, @@ -61,6 +78,12 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "exynos4210-spi.1", NULL), OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2, "exynos4210-spi.2", NULL), + OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", 0x122F0000, + "exynos5-sata", NULL), + OF_DEV_AUXDATA("samsung,exynos5-sata-phy", 0x12170000, + "exynos5-sata-phy", NULL), + OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", 0x121D0000, + "exynos5-sata-phy-i2c", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL), @@ -72,6 +95,13 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "exynos-gsc.2", NULL), OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3, "exynos-gsc.3", NULL), + OF_DEV_AUXDATA("samsung,exynos5-hdmi", 0x14530000, + "exynos5-hdmi", NULL), + OF_DEV_AUXDATA("samsung,exynos5-mixer", 0x14450000, + "exynos5-mixer", NULL), + OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL), + OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000, + "exynos-tmu", NULL), {}, }; @@ -92,6 +122,17 @@ static char const *exynos5250_dt_compat[] __initdata = { NULL }; +static void __init exynos5_reserve(void) +{ + struct s5p_mfc_dt_meminfo mfc_mem; + + /* Reserve memory for MFC only if it's available */ + mfc_mem.compatible = "samsung,mfc-v6"; + if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem)) + s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff, + mfc_mem.lsize); +} + DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ .init_irq = exynos5_init_irq, @@ -103,4 +144,5 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") .timer = &exynos4_timer, .dt_compat = exynos5250_dt_compat, .restart = exynos5_restart, + .reserve = exynos5_reserve, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index c05d7aa84031..27d4ed8b116e 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -25,7 +25,10 @@ #include <linux/mmc/host.h> #include <linux/fb.h> #include <linux/pwm_backlight.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mipi-csis.h> #include <linux/platform_data/s3c-hsotg.h> +#include <linux/platform_data/usb-ehci-s5p.h> #include <drm/exynos_drm.h> #include <video/platform_lcd.h> @@ -45,14 +48,11 @@ #include <plat/devs.h> #include <plat/fb.h> #include <plat/sdhci.h> -#include <linux/platform_data/usb-ehci-s5p.h> #include <plat/clock.h> #include <plat/gpio-cfg.h> -#include <linux/platform_data/i2c-s3c2410.h> #include <plat/mfc.h> #include <plat/fimc-core.h> #include <plat/camport.h> -#include <linux/platform_data/mipi-csis.h> #include <mach/map.h> @@ -113,7 +113,6 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | MMC_CAP_ERASE), - .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, }; @@ -1327,9 +1326,6 @@ static struct platform_device *nuri_devices[] __initdata = { &cam_vdda_fixed_rdev, &cam_8m_12v_fixed_rdev, &exynos4_bus_devfreq, -#ifdef CONFIG_DRM_EXYNOS - &exynos_device_drm, -#endif }; static void __init nuri_map_io(void) diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 9adf491674ea..c931ce15a966 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -23,7 +23,10 @@ #include <linux/mfd/max8997.h> #include <linux/lcd.h> #include <linux/rfkill-gpio.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/s3c-hsotg.h> +#include <linux/platform_data/usb-ehci-s5p.h> +#include <linux/platform_data/usb-exynos.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -36,8 +39,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/sdhci.h> -#include <linux/platform_data/i2c-s3c2410.h> -#include <linux/platform_data/usb-ehci-s5p.h> #include <plat/clock.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> @@ -45,7 +46,6 @@ #include <plat/mfc.h> #include <plat/hdmi.h> -#include <linux/platform_data/usb-exynos.h> #include <mach/map.h> #include <drm/exynos_drm.h> @@ -709,9 +709,6 @@ static struct platform_device *origen_devices[] __initdata = { &s5p_device_mfc_l, &s5p_device_mfc_r, &s5p_device_mixer, -#ifdef CONFIG_DRM_EXYNOS - &exynos_device_drm, -#endif &exynos4_device_ohci, &origen_device_gpiokeys, &origen_lcd_hv070wsa, diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index 730f1ac65928..a1555a73c7af 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -21,6 +21,7 @@ #include <linux/pwm_backlight.h> #include <linux/regulator/machine.h> #include <linux/serial_core.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/s3c-hsotg.h> #include <asm/mach/arch.h> @@ -34,7 +35,6 @@ #include <plat/devs.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> -#include <linux/platform_data/i2c-s3c2410.h> #include <plat/keypad.h> #include <plat/mfc.h> #include <plat/regs-serial.h> @@ -317,9 +317,6 @@ static struct platform_device *smdk4x12_devices[] __initdata = { &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, -#ifdef CONFIG_DRM_EXYNOS - &exynos_device_drm, -#endif &samsung_device_keypad, }; diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index ee4fb1a9cb72..063cb94b934d 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -20,7 +20,10 @@ #include <linux/input.h> #include <linux/pwm.h> #include <linux/pwm_backlight.h> +#include <linux/platform_data/i2c-s3c2410.h> #include <linux/platform_data/s3c-hsotg.h> +#include <linux/platform_data/usb-ehci-s5p.h> +#include <linux/platform_data/usb-exynos.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -35,16 +38,13 @@ #include <plat/fb.h> #include <plat/keypad.h> #include <plat/sdhci.h> -#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> #include <plat/mfc.h> -#include <linux/platform_data/usb-ehci-s5p.h> #include <plat/clock.h> #include <plat/hdmi.h> #include <mach/map.h> -#include <linux/platform_data/usb-exynos.h> #include <drm/exynos_drm.h> #include "common.h" @@ -300,9 +300,6 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s5p_device_fimc_md, &s5p_device_g2d, &s5p_device_jpeg, -#ifdef CONFIG_DRM_EXYNOS - &exynos_device_drm, -#endif &exynos4_device_ac97, &exynos4_device_i2s0, &exynos4_device_ohci, diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index ebc9dd339a38..9e3340f18950 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -23,6 +23,8 @@ #include <linux/i2c-gpio.h> #include <linux/i2c/mcs.h> #include <linux/i2c/atmel_mxt_ts.h> +#include <linux/platform_data/i2c-s3c2410.h> +#include <linux/platform_data/mipi-csis.h> #include <linux/platform_data/s3c-hsotg.h> #include <drm/exynos_drm.h> @@ -35,7 +37,6 @@ #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> -#include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> #include <plat/fb.h> #include <plat/mfc.h> @@ -43,7 +44,6 @@ #include <plat/fimc-core.h> #include <plat/s5p-time.h> #include <plat/camport.h> -#include <linux/platform_data/mipi-csis.h> #include <mach/map.h> @@ -754,7 +754,6 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), - .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, }; @@ -1081,9 +1080,6 @@ static struct platform_device *universal_devices[] __initdata = { &s5p_device_onenand, &s5p_device_fimd0, &s5p_device_jpeg, -#ifdef CONFIG_DRM_EXYNOS - &exynos_device_drm, -#endif &s3c_device_usb_hsotg, &s5p_device_mfc, &s5p_device_mfc_l, diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index c0bc83a7663e..9f1351de52f7 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -19,6 +19,8 @@ #include <linux/pm_domain.h> #include <linux/delay.h> #include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/sched.h> #include <mach/regs-pmu.h> #include <plat/devs.h> @@ -83,12 +85,88 @@ static struct exynos_pm_domain PD = { \ } #ifdef CONFIG_OF +static void exynos_add_device_to_domain(struct exynos_pm_domain *pd, + struct device *dev) +{ + int ret; + + dev_dbg(dev, "adding to power domain %s\n", pd->pd.name); + + while (1) { + ret = pm_genpd_add_device(&pd->pd, dev); + if (ret != -EAGAIN) + break; + cond_resched(); + } + + pm_genpd_dev_need_restore(dev, true); +} + +static void exynos_remove_device_from_domain(struct device *dev) +{ + struct generic_pm_domain *genpd = dev_to_genpd(dev); + int ret; + + dev_dbg(dev, "removing from power domain %s\n", genpd->name); + + while (1) { + ret = pm_genpd_remove_device(genpd, dev); + if (ret != -EAGAIN) + break; + cond_resched(); + } +} + +static void exynos_read_domain_from_dt(struct device *dev) +{ + struct platform_device *pd_pdev; + struct exynos_pm_domain *pd; + struct device_node *node; + + node = of_parse_phandle(dev->of_node, "samsung,power-domain", 0); + if (!node) + return; + pd_pdev = of_find_device_by_node(node); + if (!pd_pdev) + return; + pd = platform_get_drvdata(pd_pdev); + exynos_add_device_to_domain(pd, dev); +} + +static int exynos_pm_notifier_call(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct device *dev = data; + + switch (event) { + case BUS_NOTIFY_BIND_DRIVER: + if (dev->of_node) + exynos_read_domain_from_dt(dev); + + break; + + case BUS_NOTIFY_UNBOUND_DRIVER: + exynos_remove_device_from_domain(dev); + + break; + } + return NOTIFY_DONE; +} + +static struct notifier_block platform_nb = { + .notifier_call = exynos_pm_notifier_call, +}; + static __init int exynos_pm_dt_parse_domains(void) { + struct platform_device *pdev; struct device_node *np; for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { struct exynos_pm_domain *pd; + int on; + + pdev = of_find_device_by_node(np); pd = kzalloc(sizeof(*pd), GFP_KERNEL); if (!pd) { @@ -97,15 +175,22 @@ static __init int exynos_pm_dt_parse_domains(void) return -ENOMEM; } - if (of_get_property(np, "samsung,exynos4210-pd-off", NULL)) - pd->is_off = true; - pd->name = np->name; + pd->pd.name = kstrdup(np->name, GFP_KERNEL); + pd->name = pd->pd.name; pd->base = of_iomap(np, 0); pd->pd.power_off = exynos_pd_power_off; pd->pd.power_on = exynos_pd_power_on; pd->pd.of_node = np; - pm_genpd_init(&pd->pd, NULL, false); + + platform_set_drvdata(pdev, pd); + + on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN; + + pm_genpd_init(&pd->pd, NULL, !on); } + + bus_register_notifier(&platform_bus_type, &platform_nb); + return 0; } #else diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c index 5c10ad05df74..134377352966 100644 --- a/arch/arm/plat-mxc/3ds_debugboard.c +++ b/arch/arm/mach-imx/3ds_debugboard.c @@ -21,7 +21,7 @@ #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> -#include <mach/hardware.h> +#include "hardware.h" /* LAN9217 ethernet base address */ #define LAN9217_BASE_ADDR(n) (n + 0x0) diff --git a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/arch/arm/mach-imx/3ds_debugboard.h index 9fd6cb3f8fad..9fd6cb3f8fad 100644 --- a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h +++ b/arch/arm/mach-imx/3ds_debugboard.h diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 8d276584650e..b09924112f99 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,3 +1,70 @@ +config ARCH_MXC + bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 + select ARCH_REQUIRE_GPIOLIB + select ARM_PATCH_PHYS_VIRT + select AUTO_ZRELADDR if !ZBOOT_ROM + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + select USE_OF + help + Support for Freescale MXC/iMX-based family of processors + +menu "Freescale i.MX support" + depends on ARCH_MXC + +config MXC_IRQ_PRIOR + bool "Use IRQ priority" + help + Select this if you want to use prioritized IRQ handling. + This feature prevents higher priority ISR to be interrupted + by lower priority IRQ even IRQF_DISABLED flag is not set. + This may be useful in embedded applications, where are strong + requirements for timing. + Say N here, unless you have a specialized requirement. + +config MXC_TZIC + bool + +config MXC_AVIC + bool + +config MXC_DEBUG_BOARD + bool "Enable MXC debug board(for 3-stack)" + help + The debug board is an integral part of the MXC 3-stack(PDK) + platforms, it can be attached or removed from the peripheral + board. On debug board, several debug devices(ethernet, UART, + buttons, LEDs and JTAG) are implemented. Between the MCU and + these devices, a CPLD is added as a bridge which performs + data/address de-multiplexing and decode, signal level shift, + interrupt control and various board functions. + +config HAVE_EPIT + bool + +config MXC_USE_EPIT + bool "Use EPIT instead of GPT" + depends on HAVE_EPIT + help + Use EPIT as the system timer on systems that have it. Normally you + don't have a reason to do so as the EPIT has the same features and + uses the same clocks as the GPT. Anyway, on some systems the GPT + may be in use for other purposes. + +config MXC_ULPI + bool + +config ARCH_HAS_RNGA + bool + +config IRAM_ALLOC + bool + select GENERIC_ALLOCATOR + config HAVE_IMX_GPC bool @@ -5,6 +72,12 @@ config HAVE_IMX_MMDC bool config HAVE_IMX_SRC + def_bool y if SMP + +config IMX_HAVE_IOMUX_V1 + bool + +config ARCH_MXC_IOMUX_V3 bool config ARCH_MX1 @@ -104,7 +177,7 @@ config SOC_IMX51 select PINCTRL_IMX51 select SOC_IMX5 -if ARCH_IMX_V4_V5 +if ARCH_MULTI_V4T comment "MX1 platforms:" config MACH_MXLADS @@ -133,6 +206,10 @@ config MACH_APF9328 help Say Yes here if you are using the Armadeus APF9328 development board +endif + +if ARCH_MULTI_V5 + comment "MX21 platforms:" config MACH_MX21ADS @@ -195,6 +272,13 @@ config MACH_EUKREA_MBIMXSD25_BASEBOARD endchoice +config MACH_IMX25_DT + bool "Support i.MX25 platforms from device tree" + select SOC_IMX25 + help + Include support for Freescale i.MX25 based platforms + using the device tree for discovery + comment "MX27 platforms:" config MACH_MX27ADS @@ -384,7 +468,7 @@ config MACH_IMX27_DT endif -if ARCH_IMX_V6_V7 +if ARCH_MULTI_V6 comment "MX31 platforms:" @@ -649,6 +733,10 @@ config MACH_VPR200 Include support for VPR200 platform. This includes specific configurations for the board and its peripherals. +endif + +if ARCH_MULTI_V7 + comment "i.MX5 platforms:" config MACH_MX50_RDP @@ -748,7 +836,14 @@ config SOC_IMX53 config SOC_IMX6Q bool "i.MX6 Quad support" + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM + select ARM_ERRATA_743622 + select ARM_ERRATA_751472 + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 if SMP + select ARM_ERRATA_775420 select ARM_GIC select COMMON_CLK select CPU_V7 @@ -756,13 +851,20 @@ config SOC_IMX6Q select HAVE_CAN_FLEXCAN if CAN select HAVE_IMX_GPC select HAVE_IMX_MMDC - select HAVE_IMX_SRC select HAVE_SMP select MFD_SYSCON select PINCTRL select PINCTRL_IMX6Q + select PL310_ERRATA_588369 if CACHE_PL310 + select PL310_ERRATA_727915 if CACHE_PL310 + select PL310_ERRATA_769419 if CACHE_PL310 + select PM_OPP if PM help This enables support for Freescale i.MX6 Quad processor. endif + +source "arch/arm/mach-imx/devices/Kconfig" + +endmenu diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 895754aeb4f3..0634b3152c24 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -1,3 +1,5 @@ +obj-y := time.o cpu.o system.o irq-common.o + obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o @@ -15,6 +17,24 @@ obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(i obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o clk.o +obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o +obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o + +obj-$(CONFIG_MXC_TZIC) += tzic.o +obj-$(CONFIG_MXC_AVIC) += avic.o + +obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o +obj-$(CONFIG_MXC_ULPI) += ulpi.o +obj-$(CONFIG_MXC_USE_EPIT) += epit.o +obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o +obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o + +ifdef CONFIG_SND_IMX_SOC +obj-y += ssi-fiq.o +obj-y += ssi-fiq-ksym.o +endif + # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o @@ -30,6 +50,7 @@ obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o +obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o # i.MX27 based machines obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o @@ -89,3 +110,5 @@ obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o obj-$(CONFIG_SOC_IMX53) += mach-imx53.o + +obj-y += devices/ diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/mach-imx/avic.c index cbd55c36def3..0eff23ed92b9 100644 --- a/arch/arm/plat-mxc/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -22,12 +22,11 @@ #include <linux/irqdomain.h> #include <linux/io.h> #include <linux/of.h> -#include <mach/common.h> #include <asm/mach/irq.h> #include <asm/exception.h> -#include <mach/hardware.h> -#include <mach/irqs.h> +#include "common.h" +#include "hardware.h" #include "irq-common.h" #define AVIC_INTCNTL 0x00 /* int control reg */ diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/mach-imx/board-mx31lilly.h index 0df71bfefbb1..0df71bfefbb1 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h +++ b/arch/arm/mach-imx/board-mx31lilly.h diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/mach-imx/board-mx31lite.h index c1ad0ae807cc..c1ad0ae807cc 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h +++ b/arch/arm/mach-imx/board-mx31lite.h diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/mach-imx/board-mx31moboard.h index de14543891cf..de14543891cf 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h +++ b/arch/arm/mach-imx/board-mx31moboard.h diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/mach-imx/board-pcm038.h index 6f371e35753d..6f371e35753d 100644 --- a/arch/arm/plat-mxc/include/mach/board-pcm038.h +++ b/arch/arm/mach-imx/board-pcm038.h diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c index 516ddee1948e..15f9d223cf0b 100644 --- a/arch/arm/mach-imx/clk-imx1.c +++ b/arch/arm/mach-imx/clk-imx1.c @@ -22,9 +22,9 @@ #include <linux/clkdev.h> #include <linux/err.h> -#include <mach/hardware.h> -#include <mach/common.h> #include "clk.h" +#include "common.h" +#include "hardware.h" /* CCM register addresses */ #define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off))) @@ -82,7 +82,8 @@ int __init mx1_clocks_init(unsigned long fref) pr_err("imx1 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - clk_register_clkdev(clk[dma_gate], "ahb", "imx-dma"); + clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma"); + clk_register_clkdev(clk[hclk], "ipg", "imx1-dma"); clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0"); clk_register_clkdev(clk[mma_gate], "mma", NULL); clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0"); @@ -94,18 +95,18 @@ int __init mx1_clocks_init(unsigned long fref) clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1"); clk_register_clkdev(clk[per1], "per", "imx1-uart.2"); clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2"); - clk_register_clkdev(clk[hclk], NULL, "imx-i2c.0"); + clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0"); clk_register_clkdev(clk[per2], "per", "imx1-cspi.0"); clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0"); clk_register_clkdev(clk[per2], "per", "imx1-cspi.1"); clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1"); clk_register_clkdev(clk[per2], NULL, "imx-mmc.0"); - clk_register_clkdev(clk[per2], "per", "imx-fb.0"); - clk_register_clkdev(clk[dummy], "ipg", "imx-fb.0"); - clk_register_clkdev(clk[dummy], "ahb", "imx-fb.0"); + clk_register_clkdev(clk[per2], "per", "imx1-fb.0"); + clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0"); + clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0"); clk_register_clkdev(clk[hclk], "mshc", NULL); clk_register_clkdev(clk[per3], "ssi", NULL); - clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0"); + clk_register_clkdev(clk[clk32], NULL, "imx1-rtc.0"); clk_register_clkdev(clk[clko], "clko", NULL); mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT); diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c index cf65148bc519..d7ed66091a2a 100644 --- a/arch/arm/mach-imx/clk-imx21.c +++ b/arch/arm/mach-imx/clk-imx21.c @@ -25,9 +25,9 @@ #include <linux/module.h> #include <linux/err.h> -#include <mach/hardware.h> -#include <mach/common.h> #include "clk.h" +#include "common.h" +#include "hardware.h" #define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off))) @@ -156,16 +156,16 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx21-cspi.1"); clk_register_clkdev(clk[per2], "per", "imx21-cspi.2"); clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx21-cspi.2"); - clk_register_clkdev(clk[per3], "per", "imx-fb.0"); - clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0"); - clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx-fb.0"); + clk_register_clkdev(clk[per3], "per", "imx21-fb.0"); + clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0"); + clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx21-fb.0"); clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0"); clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0"); - clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand.0"); - clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx-dma"); - clk_register_clkdev(clk[dma_gate], "ipg", "imx-dma"); + clk_register_clkdev(clk[nfc_gate], NULL, "imx21-nand.0"); + clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx21-dma"); + clk_register_clkdev(clk[dma_gate], "ipg", "imx21-dma"); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[i2c_gate], NULL, "imx-i2c.0"); + clk_register_clkdev(clk[i2c_gate], NULL, "imx21-i2c.0"); clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad"); clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0"); clk_register_clkdev(clk[brom_gate], "brom", NULL); diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 01e2f843bf2e..b197aa73dc4b 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -23,11 +23,14 @@ #include <linux/io.h> #include <linux/clkdev.h> #include <linux/err.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/mx25.h> #include "clk.h" +#include "common.h" +#include "hardware.h" +#include "mx25.h" #define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR) @@ -55,6 +58,8 @@ #define ccm(x) (CRM_BASE + (x)) +static struct clk_onecell_data clk_data; + static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", }; static const char *per_sel_clks[] = { "ahb", "upll", }; @@ -64,24 +69,30 @@ enum mx25_clks { per7_sel, per8_sel, per9_sel, per10_sel, per11_sel, per12_sel, per13_sel, per14_sel, per15_sel, per0, per1, per2, per3, per4, per5, per6, per7, per8, per9, per10, per11, per12, per13, per14, per15, - csi_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per, gpt_ipg_per, i2c_ipg_per, - lcdc_ipg_per, nfc_ipg_per, ssi1_ipg_per, ssi2_ipg_per, uart_ipg_per, - csi_ahb, esdhc1_ahb, esdhc2_ahb, fec_ahb, lcdc_ahb, sdma_ahb, - usbotg_ahb, can1_ipg, can2_ipg, csi_ipg, cspi1_ipg, cspi2_ipg, - cspi3_ipg, dryice_ipg, esdhc1_ipg, esdhc2_ipg, fec_ipg, iim_ipg, - kpp_ipg, lcdc_ipg, pwm1_ipg, pwm2_ipg, pwm3_ipg, pwm4_ipg, sdma_ipg, - ssi1_ipg, ssi2_ipg, tsc_ipg, uart1_ipg, uart2_ipg, uart3_ipg, - uart4_ipg, uart5_ipg, wdt_ipg, clk_max + csi_ipg_per, epit_ipg_per, esai_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per, + gpt_ipg_per, i2c_ipg_per, lcdc_ipg_per, nfc_ipg_per, owire_ipg_per, + pwm_ipg_per, sim1_ipg_per, sim2_ipg_per, ssi1_ipg_per, ssi2_ipg_per, + uart_ipg_per, ata_ahb, reserved1, csi_ahb, emi_ahb, esai_ahb, esdhc1_ahb, + esdhc2_ahb, fec_ahb, lcdc_ahb, rtic_ahb, sdma_ahb, slcdc_ahb, usbotg_ahb, + reserved2, reserved3, reserved4, reserved5, can1_ipg, can2_ipg, csi_ipg, + cspi1_ipg, cspi2_ipg, cspi3_ipg, dryice_ipg, ect_ipg, epit1_ipg, epit2_ipg, + reserved6, esdhc1_ipg, esdhc2_ipg, fec_ipg, reserved7, reserved8, reserved9, + gpt1_ipg, gpt2_ipg, gpt3_ipg, gpt4_ipg, reserved10, reserved11, reserved12, + iim_ipg, reserved13, reserved14, kpp_ipg, lcdc_ipg, reserved15, pwm1_ipg, + pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg, + sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg, + uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17, + wdt_ipg, clk_max }; static struct clk *clk[clk_max]; -int __init mx25_clocks_init(void) +static int __init __mx25_clocks_init(unsigned long osc_rate) { int i; clk[dummy] = imx_clk_fixed("dummy", 0); - clk[osc] = imx_clk_fixed("osc", 24000000); + clk[osc] = imx_clk_fixed("osc", osc_rate); clk[mpll] = imx_clk_pllv1("mpll", "osc", ccm(CCM_MPCTL)); clk[upll] = imx_clk_pllv1("upll", "osc", ccm(CCM_UPCTL)); clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4); @@ -123,22 +134,36 @@ int __init mx25_clocks_init(void) clk[per14] = imx_clk_divider("per14", "per14_sel", ccm(CCM_PCDR3), 16, 6); clk[per15] = imx_clk_divider("per15", "per15_sel", ccm(CCM_PCDR3), 24, 6); clk[csi_ipg_per] = imx_clk_gate("csi_ipg_per", "per0", ccm(CCM_CGCR0), 0); + clk[epit_ipg_per] = imx_clk_gate("epit_ipg_per", "per1", ccm(CCM_CGCR0), 1); + clk[esai_ipg_per] = imx_clk_gate("esai_ipg_per", "per2", ccm(CCM_CGCR0), 2); clk[esdhc1_ipg_per] = imx_clk_gate("esdhc1_ipg_per", "per3", ccm(CCM_CGCR0), 3); clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4); clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5); clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6); clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7); clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8); + clk[owire_ipg_per] = imx_clk_gate("owire_ipg_per", "per9", ccm(CCM_CGCR0), 9); + clk[pwm_ipg_per] = imx_clk_gate("pwm_ipg_per", "per10", ccm(CCM_CGCR0), 10); + clk[sim1_ipg_per] = imx_clk_gate("sim1_ipg_per", "per11", ccm(CCM_CGCR0), 11); + clk[sim2_ipg_per] = imx_clk_gate("sim2_ipg_per", "per12", ccm(CCM_CGCR0), 12); clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13); clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14); clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15); + clk[ata_ahb] = imx_clk_gate("ata_ahb", "ahb", ccm(CCM_CGCR0), 16); + /* CCM_CGCR0(17): reserved */ clk[csi_ahb] = imx_clk_gate("csi_ahb", "ahb", ccm(CCM_CGCR0), 18); + clk[emi_ahb] = imx_clk_gate("emi_ahb", "ahb", ccm(CCM_CGCR0), 19); + clk[esai_ahb] = imx_clk_gate("esai_ahb", "ahb", ccm(CCM_CGCR0), 20); clk[esdhc1_ahb] = imx_clk_gate("esdhc1_ahb", "ahb", ccm(CCM_CGCR0), 21); clk[esdhc2_ahb] = imx_clk_gate("esdhc2_ahb", "ahb", ccm(CCM_CGCR0), 22); clk[fec_ahb] = imx_clk_gate("fec_ahb", "ahb", ccm(CCM_CGCR0), 23); clk[lcdc_ahb] = imx_clk_gate("lcdc_ahb", "ahb", ccm(CCM_CGCR0), 24); + clk[rtic_ahb] = imx_clk_gate("rtic_ahb", "ahb", ccm(CCM_CGCR0), 25); clk[sdma_ahb] = imx_clk_gate("sdma_ahb", "ahb", ccm(CCM_CGCR0), 26); + clk[slcdc_ahb] = imx_clk_gate("slcdc_ahb", "ahb", ccm(CCM_CGCR0), 27); clk[usbotg_ahb] = imx_clk_gate("usbotg_ahb", "ahb", ccm(CCM_CGCR0), 28); + /* CCM_CGCR0(29-31): reserved */ + /* CCM_CGCR1(0): reserved in datasheet, used as audmux in FSL kernel */ clk[can1_ipg] = imx_clk_gate("can1_ipg", "ipg", ccm(CCM_CGCR1), 2); clk[can2_ipg] = imx_clk_gate("can2_ipg", "ipg", ccm(CCM_CGCR1), 3); clk[csi_ipg] = imx_clk_gate("csi_ipg", "ipg", ccm(CCM_CGCR1), 4); @@ -146,17 +171,41 @@ int __init mx25_clocks_init(void) clk[cspi2_ipg] = imx_clk_gate("cspi2_ipg", "ipg", ccm(CCM_CGCR1), 6); clk[cspi3_ipg] = imx_clk_gate("cspi3_ipg", "ipg", ccm(CCM_CGCR1), 7); clk[dryice_ipg] = imx_clk_gate("dryice_ipg", "ipg", ccm(CCM_CGCR1), 8); + clk[ect_ipg] = imx_clk_gate("ect_ipg", "ipg", ccm(CCM_CGCR1), 9); + clk[epit1_ipg] = imx_clk_gate("epit1_ipg", "ipg", ccm(CCM_CGCR1), 10); + clk[epit2_ipg] = imx_clk_gate("epit2_ipg", "ipg", ccm(CCM_CGCR1), 11); + /* CCM_CGCR1(12): reserved in datasheet, used as esai in FSL kernel */ clk[esdhc1_ipg] = imx_clk_gate("esdhc1_ipg", "ipg", ccm(CCM_CGCR1), 13); clk[esdhc2_ipg] = imx_clk_gate("esdhc2_ipg", "ipg", ccm(CCM_CGCR1), 14); clk[fec_ipg] = imx_clk_gate("fec_ipg", "ipg", ccm(CCM_CGCR1), 15); + /* CCM_CGCR1(16): reserved in datasheet, used as gpio1 in FSL kernel */ + /* CCM_CGCR1(17): reserved in datasheet, used as gpio2 in FSL kernel */ + /* CCM_CGCR1(18): reserved in datasheet, used as gpio3 in FSL kernel */ + clk[gpt1_ipg] = imx_clk_gate("gpt1_ipg", "ipg", ccm(CCM_CGCR1), 19); + clk[gpt2_ipg] = imx_clk_gate("gpt2_ipg", "ipg", ccm(CCM_CGCR1), 20); + clk[gpt3_ipg] = imx_clk_gate("gpt3_ipg", "ipg", ccm(CCM_CGCR1), 21); + clk[gpt4_ipg] = imx_clk_gate("gpt4_ipg", "ipg", ccm(CCM_CGCR1), 22); + /* CCM_CGCR1(23): reserved in datasheet, used as i2c1 in FSL kernel */ + /* CCM_CGCR1(24): reserved in datasheet, used as i2c2 in FSL kernel */ + /* CCM_CGCR1(25): reserved in datasheet, used as i2c3 in FSL kernel */ clk[iim_ipg] = imx_clk_gate("iim_ipg", "ipg", ccm(CCM_CGCR1), 26); + /* CCM_CGCR1(27): reserved in datasheet, used as iomuxc in FSL kernel */ + /* CCM_CGCR1(28): reserved in datasheet, used as kpp in FSL kernel */ clk[kpp_ipg] = imx_clk_gate("kpp_ipg", "ipg", ccm(CCM_CGCR1), 28); clk[lcdc_ipg] = imx_clk_gate("lcdc_ipg", "ipg", ccm(CCM_CGCR1), 29); + /* CCM_CGCR1(30): reserved in datasheet, used as owire in FSL kernel */ clk[pwm1_ipg] = imx_clk_gate("pwm1_ipg", "ipg", ccm(CCM_CGCR1), 31); clk[pwm2_ipg] = imx_clk_gate("pwm2_ipg", "ipg", ccm(CCM_CGCR2), 0); clk[pwm3_ipg] = imx_clk_gate("pwm3_ipg", "ipg", ccm(CCM_CGCR2), 1); clk[pwm4_ipg] = imx_clk_gate("pwm4_ipg", "ipg", ccm(CCM_CGCR2), 2); + clk[rngb_ipg] = imx_clk_gate("rngb_ipg", "ipg", ccm(CCM_CGCR2), 3); + /* CCM_CGCR2(4): reserved in datasheet, used as rtic in FSL kernel */ + clk[scc_ipg] = imx_clk_gate("scc_ipg", "ipg", ccm(CCM_CGCR2), 5); clk[sdma_ipg] = imx_clk_gate("sdma_ipg", "ipg", ccm(CCM_CGCR2), 6); + clk[sim1_ipg] = imx_clk_gate("sim1_ipg", "ipg", ccm(CCM_CGCR2), 7); + clk[sim2_ipg] = imx_clk_gate("sim2_ipg", "ipg", ccm(CCM_CGCR2), 8); + clk[slcdc_ipg] = imx_clk_gate("slcdc_ipg", "ipg", ccm(CCM_CGCR2), 9); + clk[spba_ipg] = imx_clk_gate("spba_ipg", "ipg", ccm(CCM_CGCR2), 10); clk[ssi1_ipg] = imx_clk_gate("ssi1_ipg", "ipg", ccm(CCM_CGCR2), 11); clk[ssi2_ipg] = imx_clk_gate("ssi2_ipg", "ipg", ccm(CCM_CGCR2), 12); clk[tsc_ipg] = imx_clk_gate("tsc_ipg", "ipg", ccm(CCM_CGCR2), 13); @@ -165,6 +214,7 @@ int __init mx25_clocks_init(void) clk[uart3_ipg] = imx_clk_gate("uart3_ipg", "ipg", ccm(CCM_CGCR2), 16); clk[uart4_ipg] = imx_clk_gate("uart4_ipg", "ipg", ccm(CCM_CGCR2), 17); clk[uart5_ipg] = imx_clk_gate("uart5_ipg", "ipg", ccm(CCM_CGCR2), 18); + /* CCM_CGCR2(19): reserved in datasheet, but used as wdt in FSL kernel */ clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19); for (i = 0; i < ARRAY_SIZE(clk); i++) @@ -172,6 +222,18 @@ int __init mx25_clocks_init(void) pr_err("i.MX25 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); + clk_prepare_enable(clk[emi_ahb]); + + clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); + clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); + + return 0; +} + +int __init mx25_clocks_init(void) +{ + __mx25_clocks_init(24000000); + /* i.mx25 has the i.mx21 type uart */ clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0"); clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0"); @@ -183,8 +245,6 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3"); clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4"); clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4"); - clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0"); clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0"); @@ -197,7 +257,7 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[nfc_ipg_per], NULL, "mxc_nand.0"); + clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0"); /* i.mx25 has the i.mx35 type cspi */ clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0"); clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1"); @@ -212,15 +272,15 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[per10], "per", "mxc_pwm.3"); clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad"); clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc"); - clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.0"); - clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.1"); - clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.2"); + clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0"); + clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.1"); + clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0"); clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0"); clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0"); - clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx-fb.0"); - clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0"); - clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0"); + clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx21-fb.0"); + clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx21-fb.0"); + clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx21-fb.0"); clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1"); @@ -230,9 +290,9 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1"); clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1"); clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1"); - clk_register_clkdev(clk[csi_ipg_per], "per", "mx2-camera.0"); - clk_register_clkdev(clk[csi_ipg], "ipg", "mx2-camera.0"); - clk_register_clkdev(clk[csi_ahb], "ahb", "mx2-camera.0"); + clk_register_clkdev(clk[csi_ipg_per], "per", "imx25-camera.0"); + clk_register_clkdev(clk[csi_ipg], "ipg", "imx25-camera.0"); + clk_register_clkdev(clk[csi_ahb], "ahb", "imx25-camera.0"); clk_register_clkdev(clk[dummy], "audmux", NULL); clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0"); clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1"); @@ -242,5 +302,40 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[iim_ipg], "iim", NULL); mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1); + + return 0; +} + +int __init mx25_clocks_init_dt(void) +{ + struct device_node *np; + void __iomem *base; + int irq; + unsigned long osc_rate = 24000000; + + /* retrieve the freqency of fixed clocks from device tree */ + for_each_compatible_node(np, NULL, "fixed-clock") { + u32 rate; + if (of_property_read_u32(np, "clock-frequency", &rate)) + continue; + + if (of_device_is_compatible(np, "fsl,imx-osc")) + osc_rate = rate; + } + + np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm"); + clk_data.clks = clk; + clk_data.clk_num = ARRAY_SIZE(clk); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + __mx25_clocks_init(osc_rate); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt"); + base = of_iomap(np, 0); + WARN_ON(!base); + irq = irq_of_parse_and_map(np, 0); + + mxc_timer_init(base, irq); + return 0; } diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 366e5d59d886..585ab256c58f 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -6,9 +6,9 @@ #include <linux/clk-provider.h> #include <linux/of.h> -#include <mach/common.h> -#include <mach/hardware.h> #include "clk.h" +#include "common.h" +#include "hardware.h" #define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off))) @@ -211,19 +211,19 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5"); clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5"); clk_register_clkdev(clk[pwm_ipg_gate], NULL, "mxc_pwm.0"); - clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.0"); - clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "mxc-mmc.0"); - clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.1"); - clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.1"); - clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.2"); - clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.2"); + clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0"); + clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0"); + clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1"); + clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.1"); + clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.2"); + clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.2"); clk_register_clkdev(clk[cspi1_ipg_gate], NULL, "imx27-cspi.0"); clk_register_clkdev(clk[cspi2_ipg_gate], NULL, "imx27-cspi.1"); clk_register_clkdev(clk[cspi3_ipg_gate], NULL, "imx27-cspi.2"); - clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0"); - clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0"); - clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0"); - clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0"); + clk_register_clkdev(clk[per3_gate], "per", "imx21-fb.0"); + clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0"); + clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0"); + clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0"); clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); @@ -238,27 +238,27 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.2"); clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); - clk_register_clkdev(clk[nfc_baud_gate], NULL, "mxc_nand.0"); + clk_register_clkdev(clk[nfc_baud_gate], NULL, "imx27-nand.0"); clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0"); clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0"); - clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx-dma"); - clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx-dma"); + clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx27-dma"); + clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx27-dma"); clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0"); clk_register_clkdev(clk[fec_ahb_gate], "ahb", "imx27-fec.0"); clk_register_clkdev(clk[wdog_ipg_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx-i2c.0"); - clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1"); + clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx21-i2c.0"); + clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx21-i2c.1"); clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0"); clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0"); - clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "imx27-camera.0"); + clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0"); clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0"); clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0"); clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL); clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL); clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL); clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL); - clk_register_clkdev(clk[rtc_ipg_gate], NULL, "mxc_rtc"); + clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc"); clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL); clk_register_clkdev(clk[cpu_div], "cpu", NULL); clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 1253af2d9971..8be64e0a4ace 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -22,12 +22,11 @@ #include <linux/err.h> #include <linux/of.h> -#include <mach/hardware.h> -#include <mach/mx31.h> -#include <mach/common.h> - #include "clk.h" +#include "common.h" #include "crmregs-imx3.h" +#include "hardware.h" +#include "mx31.h" static const char *mcu_main_sel[] = { "spll", "mpll", }; static const char *per_sel[] = { "per_div", "ipg", }; @@ -124,10 +123,10 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2"); clk_register_clkdev(clk[pwm_gate], "pwm", NULL); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[rtc_gate], NULL, "mxc_rtc"); + clk_register_clkdev(clk[rtc_gate], NULL, "imx21-rtc"); clk_register_clkdev(clk[epit1_gate], "epit", NULL); clk_register_clkdev(clk[epit2_gate], "epit", NULL); - clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0"); + clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0"); clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); @@ -155,12 +154,12 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3"); clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4"); clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4"); - clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0"); - clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1"); - clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2"); + clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0"); + clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1"); + clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0"); - clk_register_clkdev(clk[sdhc1_gate], NULL, "mxc-mmc.0"); - clk_register_clkdev(clk[sdhc2_gate], NULL, "mxc-mmc.1"); + clk_register_clkdev(clk[sdhc1_gate], NULL, "imx31-mmc.0"); + clk_register_clkdev(clk[sdhc2_gate], NULL, "imx31-mmc.1"); clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); clk_register_clkdev(clk[firi_gate], "firi", NULL); diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 177259b523cd..66f3d65ea275 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -14,11 +14,10 @@ #include <linux/of.h> #include <linux/err.h> -#include <mach/hardware.h> -#include <mach/common.h> - #include "crmregs-imx3.h" #include "clk.h" +#include "common.h" +#include "hardware.h" struct arm_ahb_div { unsigned char arm, ahb, sel; @@ -226,9 +225,9 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0"); clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0"); clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0"); - clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1"); - clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2"); + clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0"); + clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1"); + clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); @@ -256,7 +255,7 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc"); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[nfc_div], NULL, "mxc_nand.0"); + clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); clk_prepare_enable(clk[spba_gate]); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index a0bf84803eac..abb71f6b4d60 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -14,11 +14,10 @@ #include <linux/of.h> #include <linux/err.h> -#include <mach/hardware.h> -#include <mach/common.h> - #include "crm-regs-imx5.h" #include "clk.h" +#include "common.h" +#include "hardware.h" /* Low-power Audio Playback Mode clock */ static const char *lp_apm_sel[] = { "osc", }; @@ -258,8 +257,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx35-cspi.2"); clk_register_clkdev(clk[pwm1_ipg_gate], "pwm", "mxc_pwm.0"); clk_register_clkdev(clk[pwm2_ipg_gate], "pwm", "mxc_pwm.1"); - clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0"); - clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1"); + clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0"); + clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1"); clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.0"); clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.0"); clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.0"); @@ -272,7 +271,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc"); clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc"); - clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand"); + clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand"); clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2"); @@ -345,7 +344,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2); - clk_register_clkdev(clk[hsi2c_gate], NULL, "imx-i2c.2"); + clk_register_clkdev(clk[hsi2c_gate], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL); clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0"); clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0"); @@ -440,7 +439,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2); clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0"); - clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2"); + clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[fec_gate], NULL, "imx25-fec.0"); clk_register_clkdev(clk[ipu_gate], "bus", "imx53-ipu"); clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx53-ipu"); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 3ec242f3341e..5f9f5919dd74 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -19,8 +19,9 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <mach/common.h> + #include "clk.h" +#include "common.h" #define CCGR0 0x68 #define CCGR1 0x6c @@ -405,6 +406,7 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL); clk_register_clkdev(clk[ahb], "ahb", NULL); clk_register_clkdev(clk[cko1], "cko1", NULL); + clk_register_clkdev(clk[arm], NULL, "cpu0"); /* * The gpmi needs 100MHz frequency in the EDO/Sync mode, diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c index 02be73178912..abff350ba24c 100644 --- a/arch/arm/mach-imx/clk-pllv1.c +++ b/arch/arm/mach-imx/clk-pllv1.c @@ -4,10 +4,10 @@ #include <linux/slab.h> #include <linux/kernel.h> #include <linux/err.h> -#include <mach/common.h> -#include <mach/hardware.h> #include "clk.h" +#include "common.h" +#include "hardware.h" /** * pll v1 diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/mach-imx/common.h index ead901814c0d..7191ab4434e5 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/mach-imx/common.h @@ -66,6 +66,7 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); +extern int mx25_clocks_init_dt(void); extern int mx27_clocks_init_dt(void); extern int mx31_clocks_init_dt(void); extern int mx51_clocks_init_dt(void); @@ -79,6 +80,7 @@ extern void mxc_arch_reset_init(void __iomem *); extern int mx53_revision(void); extern int mx53_display_revision(void); extern void imx_set_aips(void __iomem *); +extern int mxc_device_init(void); enum mxc_cpu_pwr_mode { WAIT_CLOCKED, /* wfi only */ diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c index 6914bcbf84e4..96ec64b5ff7d 100644 --- a/arch/arm/mach-imx/cpu-imx25.c +++ b/arch/arm/mach-imx/cpu-imx25.c @@ -11,8 +11,9 @@ */ #include <linux/module.h> #include <linux/io.h> -#include <mach/hardware.h> -#include <mach/iim.h> + +#include "iim.h" +#include "hardware.h" static int mx25_cpu_rev = -1; diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c index ff38e1505f67..fe8d36f7e30e 100644 --- a/arch/arm/mach-imx/cpu-imx27.c +++ b/arch/arm/mach-imx/cpu-imx27.c @@ -24,7 +24,7 @@ #include <linux/io.h> #include <linux/module.h> -#include <mach/hardware.h> +#include "hardware.h" static int mx27_cpu_rev = -1; static int mx27_cpu_partnumber; diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c index 3f2345f0cdaf..fde1860a2521 100644 --- a/arch/arm/mach-imx/cpu-imx31.c +++ b/arch/arm/mach-imx/cpu-imx31.c @@ -11,9 +11,10 @@ #include <linux/module.h> #include <linux/io.h> -#include <mach/hardware.h> -#include <mach/iim.h> -#include <mach/common.h> + +#include "common.h" +#include "hardware.h" +#include "iim.h" static int mx31_cpu_rev = -1; diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c index 846e46eb8cbf..ec3aaa098c17 100644 --- a/arch/arm/mach-imx/cpu-imx35.c +++ b/arch/arm/mach-imx/cpu-imx35.c @@ -10,8 +10,9 @@ */ #include <linux/module.h> #include <linux/io.h> -#include <mach/hardware.h> -#include <mach/iim.h> + +#include "hardware.h" +#include "iim.h" static int mx35_cpu_rev = -1; diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c index 8eb15a2fcaf9..d88760014ff9 100644 --- a/arch/arm/mach-imx/cpu-imx5.c +++ b/arch/arm/mach-imx/cpu-imx5.c @@ -15,9 +15,10 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> -#include <mach/hardware.h> #include <linux/io.h> +#include "hardware.h" + static int mx5_cpu_rev = -1; #define IIM_SREV 0x24 diff --git a/arch/arm/plat-mxc/cpu.c b/arch/arm/mach-imx/cpu.c index 220dd6f93126..03fcbd082593 100644 --- a/arch/arm/plat-mxc/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -1,7 +1,8 @@ #include <linux/module.h> #include <linux/io.h> -#include <mach/hardware.h> + +#include "hardware.h" unsigned int __mxc_cpu_type; EXPORT_SYMBOL(__mxc_cpu_type); diff --git a/arch/arm/mach-imx/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c index 7b92cd6da6d3..b9ef692b61a2 100644 --- a/arch/arm/mach-imx/cpu_op-mx51.c +++ b/arch/arm/mach-imx/cpu_op-mx51.c @@ -13,9 +13,10 @@ #include <linux/bug.h> #include <linux/types.h> -#include <mach/hardware.h> #include <linux/kernel.h> +#include "hardware.h" + static struct cpu_op mx51_cpu_op[] = { { .cpu_rate = 160000000,}, diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/mach-imx/cpufreq.c index b5b6f8083130..36e8b3994470 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/mach-imx/cpufreq.c @@ -22,7 +22,8 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/slab.h> -#include <mach/hardware.h> + +#include "hardware.h" #define CLK32_FREQ 32768 #define NANOSECOND (1000 * 1000 * 1000) diff --git a/arch/arm/plat-mxc/cpuidle.c b/arch/arm/mach-imx/cpuidle.c index d4cb511a44a8..d4cb511a44a8 100644 --- a/arch/arm/plat-mxc/cpuidle.c +++ b/arch/arm/mach-imx/cpuidle.c diff --git a/arch/arm/plat-mxc/include/mach/cpuidle.h b/arch/arm/mach-imx/cpuidle.h index bc932d1af372..bc932d1af372 100644 --- a/arch/arm/plat-mxc/include/mach/cpuidle.h +++ b/arch/arm/mach-imx/cpuidle.h diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h index 3aad1e70de96..f9b5afc6bcd1 100644 --- a/arch/arm/mach-imx/devices-imx1.h +++ b/arch/arm/mach-imx/devices-imx1.h @@ -6,8 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/mx1.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_imx_fb_data imx1_imx_fb_data; #define imx1_add_imx_fb(pdata) \ diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h index 93ece55f75df..bd9393280159 100644 --- a/arch/arm/mach-imx/devices-imx21.h +++ b/arch/arm/mach-imx/devices-imx21.h @@ -6,8 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/mx21.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data; #define imx21_add_imx21_hcd(pdata) \ diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h index f8e03dd1f116..0d2922bc575c 100644 --- a/arch/arm/mach-imx/devices-imx25.h +++ b/arch/arm/mach-imx/devices-imx25.h @@ -6,8 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/mx25.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_fec_data imx25_fec_data; #define imx25_add_fec(pdata) \ diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 04822932cdd1..8a1ad7972d4c 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -6,8 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/mx27.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_fec_data imx27_fec_data; #define imx27_add_fec(pdata) \ diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h index 8b2ceb45bb83..e8d1611bbc8e 100644 --- a/arch/arm/mach-imx/devices-imx31.h +++ b/arch/arm/mach-imx/devices-imx31.h @@ -6,8 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/mx31.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data; #define imx31_add_fsl_usb2_udc(pdata) \ diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h index c3e9f206ac2b..e2675f1b141c 100644 --- a/arch/arm/mach-imx/devices-imx35.h +++ b/arch/arm/mach-imx/devices-imx35.h @@ -6,8 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/mx35.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_fec_data imx35_fec_data; #define imx35_add_fec(pdata) \ diff --git a/arch/arm/mach-imx/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h index 7216667eaafc..2c290391f298 100644 --- a/arch/arm/mach-imx/devices-imx50.h +++ b/arch/arm/mach-imx/devices-imx50.h @@ -18,8 +18,7 @@ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ -#include <mach/mx50.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[]; #define imx50_add_imx_uart(id, pdata) \ diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h index 9f1718725195..deee5baee88c 100644 --- a/arch/arm/mach-imx/devices-imx51.h +++ b/arch/arm/mach-imx/devices-imx51.h @@ -6,8 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/mx51.h> -#include <mach/devices-common.h> +#include "devices/devices-common.h" extern const struct imx_fec_data imx51_fec_data; #define imx51_add_fec(pdata) \ diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index a35d9841f494..a35d9841f494 100644 --- a/arch/arm/plat-mxc/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index 76f3195475d0..2abe2a5144d0 100644 --- a/arch/arm/plat-mxc/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -1,3 +1,5 @@ +obj-y := devices.o + obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index eaf79d220c9a..e4b790b9e2aa 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -108,6 +108,7 @@ struct platform_device *__init imx_add_imxdi_rtc( #include <linux/platform_data/video-imxfb.h> struct imx_imx_fb_data { + const char *devid; resource_size_t iobase; resource_size_t iosize; resource_size_t irq; @@ -118,6 +119,7 @@ struct platform_device *__init imx_add_imx_fb( #include <linux/platform_data/i2c-imx.h> struct imx_imx_i2c_data { + const char *devid; int id; resource_size_t iobase; resource_size_t iosize; @@ -219,6 +221,7 @@ struct platform_device *__init imx_add_mx1_camera( #include <linux/platform_data/camera-mx2.h> struct imx_mx2_camera_data { + const char *devid; resource_size_t iobasecsi; resource_size_t iosizecsi; resource_size_t irqcsi; @@ -244,6 +247,7 @@ struct platform_device *__init imx_add_mxc_ehci( #include <linux/platform_data/mmc-mxcmmc.h> struct imx_mxc_mmc_data { + const char *devid; int id; resource_size_t iobase; resource_size_t iosize; @@ -256,6 +260,7 @@ struct platform_device *__init imx_add_mxc_mmc( #include <linux/platform_data/mtd-mxc_nand.h> struct imx_mxc_nand_data { + const char *devid; /* * id is traditionally 0, but -1 is more appropriate. We use -1 for new * machines but don't change existing devices as the nand device usually @@ -290,6 +295,7 @@ struct platform_device *__init imx_add_mxc_pwm( /* mxc_rtc */ struct imx_mxc_rtc_data { + const char *devid; resource_size_t iobase; resource_size_t irq; }; @@ -326,7 +332,8 @@ struct platform_device *__init imx_add_spi_imx( const struct imx_spi_imx_data *data, const struct spi_imx_master *pdata); -struct platform_device *imx_add_imx_dma(void); +struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase, + int irq, int irq_err); struct platform_device *imx_add_imx_sdma(char *name, resource_size_t iobase, int irq, struct sdma_platform_data *pdata); diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/mach-imx/devices/devices.c index 4d55a7a26e98..1b37482407f9 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/mach-imx/devices/devices.c @@ -21,7 +21,6 @@ #include <linux/init.h> #include <linux/err.h> #include <linux/platform_device.h> -#include <mach/common.h> struct device mxc_aips_bus = { .init_name = "mxc_aips", @@ -33,7 +32,7 @@ struct device mxc_ahb_bus = { .parent = &platform_bus, }; -static int __init mxc_device_init(void) +int __init mxc_device_init(void) { int ret; @@ -46,4 +45,3 @@ static int __init mxc_device_init(void) done: return ret; } -core_initcall(mxc_device_init); diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/mach-imx/devices/platform-ahci-imx.c index ade4a1c4e2a3..3d87dd9c284a 100644 --- a/arch/arm/plat-mxc/devices/platform-ahci-imx.c +++ b/arch/arm/mach-imx/devices/platform-ahci-imx.c @@ -24,8 +24,9 @@ #include <linux/device.h> #include <linux/dma-mapping.h> #include <asm/sizes.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" #define imx_ahci_imx_data_entry_single(soc, _devid) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c index 0bae44e890db..2cb188ad9a0a 100644 --- a/arch/arm/plat-mxc/devices/platform-fec.c +++ b/arch/arm/mach-imx/devices/platform-fec.c @@ -8,8 +8,9 @@ */ #include <linux/dma-mapping.h> #include <asm/sizes.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" #define imx_fec_data_entry_single(soc, _devid) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-flexcan.c b/arch/arm/mach-imx/devices/platform-flexcan.c index 4e8497af2eb1..1078bf0a94ef 100644 --- a/arch/arm/plat-mxc/devices/platform-flexcan.c +++ b/arch/arm/mach-imx/devices/platform-flexcan.c @@ -5,8 +5,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_flexcan_data_entry_single(soc, _id, _hwid, _size) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c index 848038f301fd..37e44398197b 100644 --- a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c @@ -7,8 +7,9 @@ * Free Software Foundation. */ #include <linux/dma-mapping.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" #define imx_fsl_usb2_udc_data_entry_single(soc) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/mach-imx/devices/platform-gpio-mxc.c index a7919a241032..26483fa94b75 100644 --- a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c +++ b/arch/arm/mach-imx/devices/platform-gpio-mxc.c @@ -6,7 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/devices-common.h> +#include "devices-common.h" struct platform_device *__init mxc_register_gpio(char *name, int id, resource_size_t iobase, resource_size_t iosize, int irq, int irq_high) diff --git a/arch/arm/plat-mxc/devices/platform-gpio_keys.c b/arch/arm/mach-imx/devices/platform-gpio_keys.c index 1c53a532ea0e..486282539c76 100644 --- a/arch/arm/plat-mxc/devices/platform-gpio_keys.c +++ b/arch/arm/mach-imx/devices/platform-gpio_keys.c @@ -16,8 +16,9 @@ * Boston, MA 02110-1301, USA. */ #include <asm/sizes.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" struct platform_device *__init imx_add_gpio_keys( const struct gpio_keys_platform_data *pdata) diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/mach-imx/devices/platform-imx-dma.c index 7fa7e9c92468..ccdb5dc4ddbd 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c +++ b/arch/arm/mach-imx/devices/platform-imx-dma.c @@ -6,12 +6,29 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/devices-common.h> +#include "devices-common.h" -struct platform_device __init __maybe_unused *imx_add_imx_dma(void) +struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name, + resource_size_t iobase, int irq, int irq_err) { + struct resource res[] = { + { + .start = iobase, + .end = iobase + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, { + .start = irq_err, + .end = irq_err, + .flags = IORESOURCE_IRQ, + }, + }; + return platform_device_register_resndata(&mxc_ahb_bus, - "imx-dma", -1, NULL, 0, NULL, 0); + name, -1, res, ARRAY_SIZE(res), NULL, 0); } struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name, diff --git a/arch/arm/plat-mxc/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c index 2b0b5e0aa998..10b0ed39f07f 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-fb.c +++ b/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -7,11 +7,13 @@ * Free Software Foundation. */ #include <linux/dma-mapping.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> -#define imx_imx_fb_data_entry_single(soc, _size) \ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_imx_fb_data_entry_single(soc, _devid, _size) \ { \ + .devid = _devid, \ .iobase = soc ## _LCDC_BASE_ADDR, \ .iosize = _size, \ .irq = soc ## _INT_LCDC, \ @@ -19,22 +21,22 @@ #ifdef CONFIG_SOC_IMX1 const struct imx_imx_fb_data imx1_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX1, SZ_4K); + imx_imx_fb_data_entry_single(MX1, "imx1-fb", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX1 */ #ifdef CONFIG_SOC_IMX21 const struct imx_imx_fb_data imx21_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX21, SZ_4K); + imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ #ifdef CONFIG_SOC_IMX25 const struct imx_imx_fb_data imx25_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX25, SZ_16K); + imx_imx_fb_data_entry_single(MX25, "imx21-fb", SZ_16K); #endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_imx_fb_data imx27_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX27, SZ_4K); + imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX27 */ struct platform_device *__init imx_add_imx_fb( diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c index 19ad580c0be3..8e30e5703cd2 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c +++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c @@ -6,34 +6,35 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" -#define imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size) \ +#define imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) \ { \ + .devid = _devid, \ .id = _id, \ .iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \ .iosize = _size, \ .irq = soc ## _INT_I2C ## _hwid, \ } -#define imx_imx_i2c_data_entry(soc, _id, _hwid, _size) \ - [_id] = imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size) +#define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size) \ + [_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) #ifdef CONFIG_SOC_IMX1 const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst = - imx_imx_i2c_data_entry_single(MX1, 0, , SZ_4K); + imx_imx_i2c_data_entry_single(MX1, "imx1-i2c", 0, , SZ_4K); #endif /* ifdef CONFIG_SOC_IMX1 */ #ifdef CONFIG_SOC_IMX21 const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst = - imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K); + imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ #ifdef CONFIG_SOC_IMX25 const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = { #define imx25_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K) + imx_imx_i2c_data_entry(MX25, "imx21-i2c", _id, _hwid, SZ_16K) imx25_imx_i2c_data_entry(0, 1), imx25_imx_i2c_data_entry(1, 2), imx25_imx_i2c_data_entry(2, 3), @@ -43,7 +44,7 @@ const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = { #ifdef CONFIG_SOC_IMX27 const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = { #define imx27_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX27, _id, _hwid, SZ_4K) + imx_imx_i2c_data_entry(MX27, "imx21-i2c", _id, _hwid, SZ_4K) imx27_imx_i2c_data_entry(0, 1), imx27_imx_i2c_data_entry(1, 2), }; @@ -52,7 +53,7 @@ const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = { #ifdef CONFIG_SOC_IMX31 const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = { #define imx31_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K) + imx_imx_i2c_data_entry(MX31, "imx21-i2c", _id, _hwid, SZ_4K) imx31_imx_i2c_data_entry(0, 1), imx31_imx_i2c_data_entry(1, 2), imx31_imx_i2c_data_entry(2, 3), @@ -62,7 +63,7 @@ const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = { #ifdef CONFIG_SOC_IMX35 const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = { #define imx35_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K) + imx_imx_i2c_data_entry(MX35, "imx21-i2c", _id, _hwid, SZ_4K) imx35_imx_i2c_data_entry(0, 1), imx35_imx_i2c_data_entry(1, 2), imx35_imx_i2c_data_entry(2, 3), @@ -72,7 +73,7 @@ const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = { #ifdef CONFIG_SOC_IMX50 const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = { #define imx50_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX50, _id, _hwid, SZ_4K) + imx_imx_i2c_data_entry(MX50, "imx21-i2c", _id, _hwid, SZ_4K) imx50_imx_i2c_data_entry(0, 1), imx50_imx_i2c_data_entry(1, 2), imx50_imx_i2c_data_entry(2, 3), @@ -82,10 +83,11 @@ const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = { #ifdef CONFIG_SOC_IMX51 const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = { #define imx51_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K) + imx_imx_i2c_data_entry(MX51, "imx21-i2c", _id, _hwid, SZ_4K) imx51_imx_i2c_data_entry(0, 1), imx51_imx_i2c_data_entry(1, 2), { + .devid = "imx21-i2c", .id = 2, .iobase = MX51_HSI2C_DMA_BASE_ADDR, .iosize = SZ_16K, @@ -97,7 +99,7 @@ const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = { #ifdef CONFIG_SOC_IMX53 const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = { #define imx53_imx_i2c_data_entry(_id, _hwid) \ - imx_imx_i2c_data_entry(MX53, _id, _hwid, SZ_4K) + imx_imx_i2c_data_entry(MX53, "imx21-i2c", _id, _hwid, SZ_4K) imx53_imx_i2c_data_entry(0, 1), imx53_imx_i2c_data_entry(1, 2), imx53_imx_i2c_data_entry(2, 3), @@ -120,7 +122,7 @@ struct platform_device *__init imx_add_imx_i2c( }, }; - return imx_add_platform_device("imx-i2c", data->id, + return imx_add_platform_device(data->devid, data->id, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c index 479c3e9f771f..8f22a4c98a4c 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-keypad.c +++ b/arch/arm/mach-imx/devices/platform-imx-keypad.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_imx_keypad_data_entry_single(soc, _size) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c index 21c6f30e1017..bfcb8f3dfa8d 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-ssi.c +++ b/arch/arm/mach-imx/devices/platform-imx-ssi.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \ [_id] = { \ diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c index d390f00bd294..67bf866a2cb6 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-uart.c +++ b/arch/arm/mach-imx/devices/platform-imx-uart.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \ [_id] = { \ diff --git a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c index 5e07ef2bf1c4..ec75d6413686 100644 --- a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c +++ b/arch/arm/mach-imx/devices/platform-imx2-wdt.c @@ -7,8 +7,9 @@ * Free Software Foundation. */ #include <asm/sizes.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" #define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-imx21-hcd.c b/arch/arm/mach-imx/devices/platform-imx21-hcd.c index 5770a42f33bf..30c81616a9a1 100644 --- a/arch/arm/plat-mxc/devices/platform-imx21-hcd.c +++ b/arch/arm/mach-imx/devices/platform-imx21-hcd.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_imx21_hcd_data_entry_single(soc) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-imx27-coda.c b/arch/arm/mach-imx/devices/platform-imx27-coda.c index 8b12aacdf396..25bebc29e546 100644 --- a/arch/arm/plat-mxc/devices/platform-imx27-coda.c +++ b/arch/arm/mach-imx/devices/platform-imx27-coda.c @@ -7,8 +7,8 @@ * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #ifdef CONFIG_SOC_IMX27 const struct imx_imx27_coda_data imx27_coda_data __initconst = { diff --git a/arch/arm/plat-mxc/devices/platform-imx_udc.c b/arch/arm/mach-imx/devices/platform-imx_udc.c index 6fd675dfce14..5ced7e4e2c71 100644 --- a/arch/arm/plat-mxc/devices/platform-imx_udc.c +++ b/arch/arm/mach-imx/devices/platform-imx_udc.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_imx_udc_data_entry_single(soc, _size) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c b/arch/arm/mach-imx/devices/platform-imxdi_rtc.c index 805336fdc252..5bb490d556ea 100644 --- a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c +++ b/arch/arm/mach-imx/devices/platform-imxdi_rtc.c @@ -7,8 +7,9 @@ * Free Software Foundation. */ #include <asm/sizes.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" #define imx_imxdi_rtc_data_entry_single(soc) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c index d1e33cc6f12e..fc4dd7cedc11 100644 --- a/arch/arm/plat-mxc/devices/platform-ipu-core.c +++ b/arch/arm/mach-imx/devices/platform-ipu-core.c @@ -7,8 +7,9 @@ * Free Software Foundation. */ #include <linux/dma-mapping.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" #define imx_ipu_core_entry_single(soc) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-mx1-camera.c b/arch/arm/mach-imx/devices/platform-mx1-camera.c index edcc581a30a9..2c6788131080 100644 --- a/arch/arm/plat-mxc/devices/platform-mx1-camera.c +++ b/arch/arm/mach-imx/devices/platform-mx1-camera.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_mx1_camera_data_entry_single(soc, _size) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-mx2-camera.c b/arch/arm/mach-imx/devices/platform-mx2-camera.c index 11eace953a09..f4910160346b 100644 --- a/arch/arm/plat-mxc/devices/platform-mx2-camera.c +++ b/arch/arm/mach-imx/devices/platform-mx2-camera.c @@ -6,17 +6,19 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" -#define imx_mx2_camera_data_entry_single(soc) \ +#define imx_mx2_camera_data_entry_single(soc, _devid) \ { \ + .devid = _devid, \ .iobasecsi = soc ## _CSI_BASE_ADDR, \ .iosizecsi = SZ_4K, \ .irqcsi = soc ## _INT_CSI, \ } -#define imx_mx2_camera_data_entry_single_emma(soc) \ +#define imx_mx2_camera_data_entry_single_emma(soc, _devid) \ { \ + .devid = _devid, \ .iobasecsi = soc ## _CSI_BASE_ADDR, \ .iosizecsi = SZ_32, \ .irqcsi = soc ## _INT_CSI, \ @@ -27,12 +29,12 @@ #ifdef CONFIG_SOC_IMX25 const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst = - imx_mx2_camera_data_entry_single(MX25); + imx_mx2_camera_data_entry_single(MX25, "imx25-camera"); #endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst = - imx_mx2_camera_data_entry_single_emma(MX27); + imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera"); #endif /* ifdef CONFIG_SOC_IMX27 */ struct platform_device *__init imx_add_mx2_camera( @@ -58,7 +60,7 @@ struct platform_device *__init imx_add_mx2_camera( .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device_dmamask("mx2-camera", 0, + return imx_add_platform_device_dmamask(data->devid, 0, res, data->iobaseemmaprp ? 4 : 2, pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } diff --git a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c index 35851d889aca..5d4bbbfde641 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c +++ b/arch/arm/mach-imx/devices/platform-mxc-ehci.c @@ -7,8 +7,9 @@ * Free Software Foundation. */ #include <linux/dma-mapping.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "../hardware.h" +#include "devices-common.h" #define imx_mxc_ehci_data_entry_single(soc, _id, hs) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/mach-imx/devices/platform-mxc-mmc.c index e7b920b58675..b8203c760c8f 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c +++ b/arch/arm/mach-imx/devices/platform-mxc-mmc.c @@ -7,24 +7,26 @@ * Free Software Foundation. */ #include <linux/dma-mapping.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> -#define imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size) \ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) \ { \ + .devid = _devid, \ .id = _id, \ .iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR, \ .iosize = _size, \ .irq = soc ## _INT_SDHC ## _hwid, \ .dmareq = soc ## _DMA_REQ_SDHC ## _hwid, \ } -#define imx_mxc_mmc_data_entry(soc, _id, _hwid, _size) \ - [_id] = imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size) +#define imx_mxc_mmc_data_entry(soc, _devid, _id, _hwid, _size) \ + [_id] = imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) #ifdef CONFIG_SOC_IMX21 const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = { #define imx21_mxc_mmc_data_entry(_id, _hwid) \ - imx_mxc_mmc_data_entry(MX21, _id, _hwid, SZ_4K) + imx_mxc_mmc_data_entry(MX21, "imx21-mmc", _id, _hwid, SZ_4K) imx21_mxc_mmc_data_entry(0, 1), imx21_mxc_mmc_data_entry(1, 2), }; @@ -33,7 +35,7 @@ const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = { #ifdef CONFIG_SOC_IMX27 const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = { #define imx27_mxc_mmc_data_entry(_id, _hwid) \ - imx_mxc_mmc_data_entry(MX27, _id, _hwid, SZ_4K) + imx_mxc_mmc_data_entry(MX27, "imx21-mmc", _id, _hwid, SZ_4K) imx27_mxc_mmc_data_entry(0, 1), imx27_mxc_mmc_data_entry(1, 2), }; @@ -42,7 +44,7 @@ const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = { #ifdef CONFIG_SOC_IMX31 const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = { #define imx31_mxc_mmc_data_entry(_id, _hwid) \ - imx_mxc_mmc_data_entry(MX31, _id, _hwid, SZ_16K) + imx_mxc_mmc_data_entry(MX31, "imx31-mmc", _id, _hwid, SZ_16K) imx31_mxc_mmc_data_entry(0, 1), imx31_mxc_mmc_data_entry(1, 2), }; @@ -67,7 +69,7 @@ struct platform_device *__init imx_add_mxc_mmc( .flags = IORESOURCE_DMA, }, }; - return imx_add_platform_device_dmamask("mxc-mmc", data->id, + return imx_add_platform_device_dmamask(data->devid, data->id, res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c index 95b75cc70515..7af1c53e42b5 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_nand.c +++ b/arch/arm/mach-imx/devices/platform-mxc_nand.c @@ -7,18 +7,21 @@ * Free Software Foundation. */ #include <asm/sizes.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> -#define imx_mxc_nand_data_entry_single(soc, _size) \ +#include "../hardware.h" +#include "devices-common.h" + +#define imx_mxc_nand_data_entry_single(soc, _devid, _size) \ { \ + .devid = _devid, \ .iobase = soc ## _NFC_BASE_ADDR, \ .iosize = _size, \ .irq = soc ## _INT_NFC \ } -#define imx_mxc_nandv3_data_entry_single(soc, _size) \ +#define imx_mxc_nandv3_data_entry_single(soc, _devid, _size) \ { \ + .devid = _devid, \ .id = -1, \ .iobase = soc ## _NFC_BASE_ADDR, \ .iosize = _size, \ @@ -28,32 +31,32 @@ #ifdef CONFIG_SOC_IMX21 const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX21, SZ_4K); + imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ #ifdef CONFIG_SOC_IMX25 const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX25, SZ_8K); + imx_mxc_nand_data_entry_single(MX25, "imx25-nand", SZ_8K); #endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX27, SZ_4K); + imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX27 */ #ifdef CONFIG_SOC_IMX31 const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX31, SZ_4K); + imx_mxc_nand_data_entry_single(MX31, "imx27-nand", SZ_4K); #endif #ifdef CONFIG_SOC_IMX35 const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX35, SZ_8K); + imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K); #endif #ifdef CONFIG_SOC_IMX51 const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst = - imx_mxc_nandv3_data_entry_single(MX51, SZ_16K); + imx_mxc_nandv3_data_entry_single(MX51, "imx51-nand", SZ_16K); #endif struct platform_device *__init imx_add_mxc_nand( @@ -76,7 +79,7 @@ struct platform_device *__init imx_add_mxc_nand( .flags = IORESOURCE_MEM, }, }; - return imx_add_platform_device("mxc_nand", data->id, + return imx_add_platform_device(data->devid, data->id, res, ARRAY_SIZE(res) - !data->axibase, pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/devices/platform-mxc_pwm.c b/arch/arm/mach-imx/devices/platform-mxc_pwm.c index b0c4ae298111..dcd289777687 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_pwm.c +++ b/arch/arm/mach-imx/devices/platform-mxc_pwm.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-mxc_rnga.c b/arch/arm/mach-imx/devices/platform-mxc_rnga.c index b4b7612b6e17..c58404badb59 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_rnga.c +++ b/arch/arm/mach-imx/devices/platform-mxc_rnga.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" struct imx_mxc_rnga_data { resource_size_t iobase; diff --git a/arch/arm/plat-mxc/devices/platform-mxc_rtc.c b/arch/arm/mach-imx/devices/platform-mxc_rtc.c index a5c9ad5721c2..c7fffaadf847 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_rtc.c +++ b/arch/arm/mach-imx/devices/platform-mxc_rtc.c @@ -6,23 +6,24 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" -#define imx_mxc_rtc_data_entry_single(soc) \ +#define imx_mxc_rtc_data_entry_single(soc, _devid) \ { \ + .devid = _devid, \ .iobase = soc ## _RTC_BASE_ADDR, \ .irq = soc ## _INT_RTC, \ } #ifdef CONFIG_SOC_IMX31 const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst = - imx_mxc_rtc_data_entry_single(MX31); + imx_mxc_rtc_data_entry_single(MX31, "imx21-rtc"); #endif /* ifdef CONFIG_SOC_IMX31 */ #ifdef CONFIG_SOC_IMX35 const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst = - imx_mxc_rtc_data_entry_single(MX35); + imx_mxc_rtc_data_entry_single(MX35, "imx21-rtc"); #endif /* ifdef CONFIG_SOC_IMX35 */ struct platform_device *__init imx_add_mxc_rtc( @@ -40,6 +41,6 @@ struct platform_device *__init imx_add_mxc_rtc( }, }; - return imx_add_platform_device("mxc_rtc", -1, + return imx_add_platform_device(data->devid, -1, res, ARRAY_SIZE(res), NULL, 0); } diff --git a/arch/arm/plat-mxc/devices/platform-mxc_w1.c b/arch/arm/mach-imx/devices/platform-mxc_w1.c index 96fa5ea91fe8..88c18b720d63 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_w1.c +++ b/arch/arm/mach-imx/devices/platform-mxc_w1.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_mxc_w1_data_entry_single(soc) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-pata_imx.c b/arch/arm/mach-imx/devices/platform-pata_imx.c index 70e2f2a44714..e4ec11c8ce55 100644 --- a/arch/arm/plat-mxc/devices/platform-pata_imx.c +++ b/arch/arm/mach-imx/devices/platform-pata_imx.c @@ -3,8 +3,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_pata_imx_data_entry_single(soc, _size) \ { \ diff --git a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c index 3793e475cd95..e66a4e316311 100644 --- a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c +++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c @@ -6,10 +6,11 @@ * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> #include <linux/platform_data/mmc-esdhc-imx.h> +#include "../hardware.h" +#include "devices-common.h" + #define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \ { \ .devid = _devid, \ diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c index 9c50c14c8f92..8880bcb11e05 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/mach-imx/devices/platform-spi_imx.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \ { \ diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c index 576af7446952..134c190e3003 100644 --- a/arch/arm/mach-imx/ehci-imx25.c +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -15,10 +15,10 @@ #include <linux/platform_device.h> #include <linux/io.h> - -#include <mach/hardware.h> #include <linux/platform_data/usb-ehci-mxc.h> +#include "hardware.h" + #define USBCTRL_OTGBASE_OFFSET 0x600 #define MX25_OTG_SIC_SHIFT 29 diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c index cd6e1f81508d..448d9115539d 100644 --- a/arch/arm/mach-imx/ehci-imx27.c +++ b/arch/arm/mach-imx/ehci-imx27.c @@ -15,10 +15,10 @@ #include <linux/platform_device.h> #include <linux/io.h> - -#include <mach/hardware.h> #include <linux/platform_data/usb-ehci-mxc.h> +#include "hardware.h" + #define USBCTRL_OTGBASE_OFFSET 0x600 #define MX27_OTG_SIC_SHIFT 29 diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c index 9a880c78af34..05de4e1e39d7 100644 --- a/arch/arm/mach-imx/ehci-imx31.c +++ b/arch/arm/mach-imx/ehci-imx31.c @@ -15,10 +15,10 @@ #include <linux/platform_device.h> #include <linux/io.h> - -#include <mach/hardware.h> #include <linux/platform_data/usb-ehci-mxc.h> +#include "hardware.h" + #define USBCTRL_OTGBASE_OFFSET 0x600 #define MX31_OTG_SIC_SHIFT 29 diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index 293397852e4e..554e7cccff53 100644 --- a/arch/arm/mach-imx/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -15,10 +15,10 @@ #include <linux/platform_device.h> #include <linux/io.h> - -#include <mach/hardware.h> #include <linux/platform_data/usb-ehci-mxc.h> +#include "hardware.h" + #define USBCTRL_OTGBASE_OFFSET 0x600 #define MX35_OTG_SIC_SHIFT 29 diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c index cf8d00e5cce1..e49710b10c68 100644 --- a/arch/arm/mach-imx/ehci-imx5.c +++ b/arch/arm/mach-imx/ehci-imx5.c @@ -15,10 +15,10 @@ #include <linux/platform_device.h> #include <linux/io.h> - -#include <mach/hardware.h> #include <linux/platform_data/usb-ehci-mxc.h> +#include "hardware.h" + #define MXC_OTG_OFFSET 0 #define MXC_H1_OFFSET 0x200 #define MXC_H2_OFFSET 0x400 diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/mach-imx/epit.c index 88726f4dbbfa..04a5961beeac 100644 --- a/arch/arm/plat-mxc/epit.c +++ b/arch/arm/mach-imx/epit.c @@ -51,10 +51,10 @@ #include <linux/clockchips.h> #include <linux/clk.h> #include <linux/err.h> - -#include <mach/hardware.h> #include <asm/mach/time.h> -#include <mach/common.h> + +#include "common.h" +#include "hardware.h" static struct clock_event_device clockevent_epit; static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; diff --git a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h b/arch/arm/mach-imx/eukrea-baseboards.h index a21d3313f994..a21d3313f994 100644 --- a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h +++ b/arch/arm/mach-imx/eukrea-baseboards.h diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 98aef571b9f8..b4c70028d359 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -29,11 +29,10 @@ #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/iomux-mx27.h> -#include <mach/hardware.h> - +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" static const int eukrea_mbimx27_pins[] __initconst = { /* UART2 */ diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index 0b84666792f0..e2b70f4c1a2c 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -26,14 +26,14 @@ #include <linux/spi/spi.h> #include <video/platform_lcd.h> -#include <mach/hardware.h> -#include <mach/iomux-mx25.h> -#include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/mx25.h> +#include "common.h" #include "devices-imx25.h" +#include "hardware.h" +#include "iomux-mx25.h" +#include "mx25.h" static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { /* LCD */ diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index c6532a007d46..5a2d5ef12dd5 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -36,11 +36,10 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx35.h> - +#include "common.h" #include "devices-imx35.h" +#include "hardware.h" +#include "iomux-mx35.h" static const struct fb_videomode fb_modedb[] = { { diff --git a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c index 8b0de30d7a3f..9be6c1e69d68 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c @@ -36,11 +36,10 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx51.h> - +#include "common.h" #include "devices-imx51.h" +#include "hardware.h" +#include "iomux-mx51.h" static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = { /* LED */ diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/mach-imx/hardware.h index ebf10654bb42..3ce7fa3bd43f 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -105,20 +105,20 @@ #define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x)) -#include <mach/mxc.h> +#include "mxc.h" -#include <mach/mx6q.h> -#include <mach/mx50.h> -#include <mach/mx51.h> -#include <mach/mx53.h> -#include <mach/mx3x.h> -#include <mach/mx31.h> -#include <mach/mx35.h> -#include <mach/mx2x.h> -#include <mach/mx21.h> -#include <mach/mx27.h> -#include <mach/mx1.h> -#include <mach/mx25.h> +#include "mx6q.h" +#include "mx50.h" +#include "mx51.h" +#include "mx53.h" +#include "mx3x.h" +#include "mx31.h" +#include "mx35.h" +#include "mx2x.h" +#include "mx21.h" +#include "mx27.h" +#include "mx1.h" +#include "mx25.h" #define imx_map_entry(soc, name, _type) { \ .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index b07b778dc9a8..3dec962b0770 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -13,7 +13,8 @@ #include <linux/errno.h> #include <asm/cacheflush.h> #include <asm/cp15.h> -#include <mach/common.h> + +#include "common.h" static inline void cpu_enter_lowpower(void) { diff --git a/arch/arm/plat-mxc/include/mach/iim.h b/arch/arm/mach-imx/iim.h index 315bffadafda..315bffadafda 100644 --- a/arch/arm/plat-mxc/include/mach/iim.h +++ b/arch/arm/mach-imx/iim.h diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c new file mode 100644 index 000000000000..e17dfbc42192 --- /dev/null +++ b/arch/arm/mach-imx/imx25-dt.c @@ -0,0 +1,48 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/irq.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include "common.h" +#include "mx25.h" + +static void __init imx25_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void __init imx25_timer_init(void) +{ + mx25_clocks_init_dt(); +} + +static struct sys_timer imx25_timer = { + .init = imx25_timer_init, +}; + +static const char * const imx25_dt_board_compat[] __initconst = { + "fsl,imx25", + NULL +}; + +DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") + .map_io = mx25_map_io, + .init_early = imx25_init_early, + .init_irq = mx25_init_irq, + .handle_irq = imx25_handle_irq, + .timer = &imx25_timer, + .init_machine = imx25_dt_init, + .dt_compat = imx25_dt_board_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index e80d5235dac0..ebfae96543c4 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -14,21 +14,22 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/mx27.h> + +#include "common.h" +#include "mx27.h" static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART1_BASE_ADDR, "imx21-uart.0", NULL), OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART2_BASE_ADDR, "imx21-uart.1", NULL), OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART3_BASE_ADDR, "imx21-uart.2", NULL), OF_DEV_AUXDATA("fsl,imx27-fec", MX27_FEC_BASE_ADDR, "imx27-fec.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx-i2c.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx-i2c.1", NULL), + OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx21-i2c.0", NULL), + OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx21-i2c.1", NULL), OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI1_BASE_ADDR, "imx27-cspi.0", NULL), OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL), OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL), OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "mxc_nand.0", NULL), + OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "imx27-nand.0", NULL), { /* sentinel */ } }; diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c index a68ba207b2b7..af476de2570e 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/imx31-dt.c @@ -14,8 +14,9 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/mx31.h> + +#include "common.h" +#include "mx31.h" static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR, diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index f233b4bb2342..50742990a136 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -15,8 +15,9 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/mx51.h> + +#include "common.h" +#include "mx51.h" /* * Lookup table for attaching a specific name and platform_data pointer to @@ -36,8 +37,8 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL), OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL), OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL), - OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx-i2c.0", NULL), - OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx-i2c.1", NULL), + OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx21-i2c.0", NULL), + OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx21-i2c.1", NULL), OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL), OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL), { /* sentinel */ } diff --git a/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h deleted file mode 100644 index df5f522da6b3..000000000000 --- a/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __MACH_DMA_MX1_MX2_H__ -#define __MACH_DMA_MX1_MX2_H__ -/* - * Don't use this header in new code, it will go away when all users are - * converted to mach/dma-v1.h - */ - -#include <mach/dma-v1.h> - -#endif /* ifndef __MACH_DMA_MX1_MX2_H__ */ diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index 82bd4403b450..cabefbc5e7c1 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -22,8 +22,9 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/kernel.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> + +#include "hardware.h" +#include "iomux-mx3.h" /* * IOMUX register (base) addresses diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/arch/arm/mach-imx/iomux-mx1.h index 6b1507cf378e..95f4681d85d7 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx1.h +++ b/arch/arm/mach-imx/iomux-mx1.h @@ -18,7 +18,7 @@ #ifndef __MACH_IOMUX_MX1_H__ #define __MACH_IOMUX_MX1_H__ -#include <mach/iomux-v1.h> +#include "iomux-v1.h" #define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) #define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/arch/arm/mach-imx/iomux-mx21.h index 1495dfda7834..a70cffceb085 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx21.h +++ b/arch/arm/mach-imx/iomux-mx21.h @@ -18,8 +18,8 @@ #ifndef __MACH_IOMUX_MX21_H__ #define __MACH_IOMUX_MX21_H__ -#include <mach/iomux-mx2x.h> -#include <mach/iomux-v1.h> +#include "iomux-mx2x.h" +#include "iomux-v1.h" /* Primary GPIO pin functions */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/mach-imx/iomux-mx25.h index c61ec0fc10d4..be51e838375c 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/mach-imx/iomux-mx25.h @@ -19,7 +19,7 @@ #ifndef __MACH_IOMUX_MX25_H__ #define __MACH_IOMUX_MX25_H__ -#include <mach/iomux-v3.h> +#include "iomux-v3.h" /* * IOMUX/PAD Bit field definitions diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/arch/arm/mach-imx/iomux-mx27.h index d9f9a6e32d80..218e99e89e86 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx27.h +++ b/arch/arm/mach-imx/iomux-mx27.h @@ -19,8 +19,8 @@ #ifndef __MACH_IOMUX_MX27_H__ #define __MACH_IOMUX_MX27_H__ -#include <mach/iomux-mx2x.h> -#include <mach/iomux-v1.h> +#include "iomux-mx2x.h" +#include "iomux-v1.h" /* Primary GPIO pin functions */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/mach-imx/iomux-mx2x.h index 7a9b20abda09..7a9b20abda09 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h +++ b/arch/arm/mach-imx/iomux-mx2x.h diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h index f79f78a1c0ed..f79f78a1c0ed 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/mach-imx/iomux-mx3.h diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/mach-imx/iomux-mx35.h index 3117c18bbbd9..90bfa6b5be6a 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h +++ b/arch/arm/mach-imx/iomux-mx35.h @@ -19,7 +19,7 @@ #ifndef __MACH_IOMUX_MX35_H__ #define __MACH_IOMUX_MX35_H__ -#include <mach/iomux-v3.h> +#include "iomux-v3.h" /* * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode> diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx50.h b/arch/arm/mach-imx/iomux-mx50.h index 98e7fd0b9083..00f56e0e8009 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx50.h +++ b/arch/arm/mach-imx/iomux-mx50.h @@ -19,7 +19,7 @@ #ifndef __MACH_IOMUX_MX50_H__ #define __MACH_IOMUX_MX50_H__ -#include <mach/iomux-v3.h> +#include "iomux-v3.h" #define MX50_ELCDIF_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/mach-imx/iomux-mx51.h index 2623e7a2e190..75bbcc4aa2d2 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/mach-imx/iomux-mx51.h @@ -13,7 +13,7 @@ #ifndef __MACH_IOMUX_MX51_H__ #define __MACH_IOMUX_MX51_H__ -#include <mach/iomux-v3.h> +#include "iomux-v3.h" #define __NA_ 0x000 diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c index 1f73963bc13e..2b156d1d9e21 100644 --- a/arch/arm/plat-mxc/iomux-v1.c +++ b/arch/arm/mach-imx/iomux-v1.c @@ -28,9 +28,10 @@ #include <linux/string.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach/map.h> -#include <mach/iomux-v1.h> + +#include "hardware.h" +#include "iomux-v1.h" static void __iomem *imx_iomuxv1_baseaddr; static unsigned imx_iomuxv1_numports; diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/mach-imx/iomux-v1.h index 02651a40fe23..02651a40fe23 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v1.h +++ b/arch/arm/mach-imx/iomux-v1.h diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c index 99a9cdb9d6be..9dae74bf47fc 100644 --- a/arch/arm/plat-mxc/iomux-v3.c +++ b/arch/arm/mach-imx/iomux-v3.c @@ -25,9 +25,10 @@ #include <linux/string.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach/map.h> -#include <mach/iomux-v3.h> + +#include "hardware.h" +#include "iomux-v3.h" static void __iomem *base; diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/mach-imx/iomux-v3.h index 2fa3b5430102..2fa3b5430102 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/mach-imx/iomux-v3.h diff --git a/arch/arm/plat-mxc/include/mach/iram.h b/arch/arm/mach-imx/iram.h index 022690c33702..022690c33702 100644 --- a/arch/arm/plat-mxc/include/mach/iram.h +++ b/arch/arm/mach-imx/iram.h diff --git a/arch/arm/plat-mxc/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c index 074c3869626a..6c80424f678e 100644 --- a/arch/arm/plat-mxc/iram_alloc.c +++ b/arch/arm/mach-imx/iram_alloc.c @@ -22,7 +22,8 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/genalloc.h> -#include <mach/iram.h> + +#include "iram.h" static unsigned long iram_phys_base; static void __iomem *iram_virt_base; diff --git a/arch/arm/plat-mxc/irq-common.c b/arch/arm/mach-imx/irq-common.c index b6e11458e5ae..b6e11458e5ae 100644 --- a/arch/arm/plat-mxc/irq-common.c +++ b/arch/arm/mach-imx/irq-common.c diff --git a/arch/arm/plat-mxc/irq-common.h b/arch/arm/mach-imx/irq-common.h index 6ccb3a14c693..5b2dabba330f 100644 --- a/arch/arm/plat-mxc/irq-common.h +++ b/arch/arm/mach-imx/irq-common.h @@ -19,6 +19,9 @@ #ifndef __PLAT_MXC_IRQ_COMMON_H__ #define __PLAT_MXC_IRQ_COMMON_H__ +/* all normal IRQs can be FIQs */ +#define FIQ_START 0 + struct mxc_extra_irq { int (*set_priority)(unsigned char irq, unsigned char prio); diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c index c40a34c00489..2fdc9bf2fb5e 100644 --- a/arch/arm/mach-imx/lluart.c +++ b/arch/arm/mach-imx/lluart.c @@ -14,19 +14,28 @@ #include <asm/page.h> #include <asm/sizes.h> #include <asm/mach/map.h> -#include <mach/hardware.h> + +#include "hardware.h" + +#define IMX6Q_UART1_BASE_ADDR 0x02020000 +#define IMX6Q_UART2_BASE_ADDR 0x021e8000 +#define IMX6Q_UART3_BASE_ADDR 0x021ec000 +#define IMX6Q_UART4_BASE_ADDR 0x021f0000 +#define IMX6Q_UART5_BASE_ADDR 0x021f4000 + +/* + * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion + * of IMX6Q_UART##n##_BASE_ADDR. + */ +#define IMX6Q_UART_BASE_ADDR(n) IMX6Q_UART##n##_BASE_ADDR +#define IMX6Q_UART_BASE(n) IMX6Q_UART_BASE_ADDR(n) +#define IMX6Q_DEBUG_UART_BASE IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT) static struct map_desc imx_lluart_desc = { -#ifdef CONFIG_DEBUG_IMX6Q_UART2 - .virtual = MX6Q_IO_P2V(MX6Q_UART2_BASE_ADDR), - .pfn = __phys_to_pfn(MX6Q_UART2_BASE_ADDR), - .length = MX6Q_UART2_SIZE, - .type = MT_DEVICE, -#endif -#ifdef CONFIG_DEBUG_IMX6Q_UART4 - .virtual = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR), - .pfn = __phys_to_pfn(MX6Q_UART4_BASE_ADDR), - .length = MX6Q_UART4_SIZE, +#ifdef CONFIG_DEBUG_IMX6Q_UART + .virtual = IMX_IO_P2V(IMX6Q_DEBUG_UART_BASE), + .pfn = __phys_to_pfn(IMX6Q_DEBUG_UART_BASE), + .length = 0x4000, .type = MT_DEVICE, #endif }; diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index 7b99a79722b6..5c9bd2c66e6d 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -25,11 +25,10 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx1.h> - +#include "common.h" #include "devices-imx1.h" +#include "hardware.h" +#include "iomux-mx1.h" static const int apf9328_pins[] __initconst = { /* UART1 */ diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 5985ed1b8c98..59bd6b06a6b5 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -41,19 +41,18 @@ #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/memory.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/ulpi.h> - +#include "common.h" #include "devices-imx31.h" #include "crmregs-imx3.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" static int armadillo5x0_pins[] = { /* UART1 */ diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index 9a9897749dd6..3a39d5aec07a 100644 --- a/arch/arm/mach-imx/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -19,15 +19,14 @@ #include <linux/init.h> #include <linux/platform_device.h> -#include <mach/iomux-mx3.h> -#include <mach/hardware.h> -#include <mach/common.h> - #include <asm/mach/time.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 2bb9e18d9ee1..12a370646b45 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -34,13 +34,12 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/eukrea-baseboards.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx27.h> -#include <mach/ulpi.h> - +#include "common.h" #include "devices-imx27.h" +#include "eukrea-baseboards.h" +#include "hardware.h" +#include "iomux-mx27.h" +#include "ulpi.h" static const int eukrea_cpuimx27_pins[] __initconst = { /* UART1 */ diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index d49b0ec6bdec..5a31bf8c8f4c 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -37,12 +37,11 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/eukrea-baseboards.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx35.h> - +#include "common.h" #include "devices-imx35.h" +#include "eukrea-baseboards.h" +#include "hardware.h" +#include "iomux-mx35.h" static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index b87cc49ab1e8..b727de029c8f 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -26,18 +26,17 @@ #include <linux/spi/spi.h> #include <linux/can/platform/mcp251x.h> -#include <mach/eukrea-baseboards.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx51.h> - #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "common.h" #include "devices-imx51.h" #include "cpu_op-mx51.h" +#include "eukrea-baseboards.h" +#include "hardware.h" +#include "iomux-mx51.h" #define USBH1_RST IMX_GPIO_NR(2, 28) #define ETH_RST IMX_GPIO_NR(2, 31) diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 017bbb70ea41..75027a5ad8b7 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -27,18 +27,18 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> -#include <mach/eukrea-baseboards.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/memory.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/mx25.h> -#include <mach/iomux-mx25.h> +#include "common.h" #include "devices-imx25.h" +#include "eukrea-baseboards.h" +#include "hardware.h" +#include "iomux-mx25.h" +#include "mx25.h" static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 141756f00ae5..b74422679126 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -40,11 +40,11 @@ #include <asm/mach/time.h> #include <asm/system_info.h> #include <asm/memblock.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx27.h> +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" #define TVP5150_RSTN (GPIO_PORTC + 18) #define TVP5150_PWDN (GPIO_PORTC + 19) diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 7381387a8905..53a860112938 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -17,11 +17,11 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx27.h> +#include "hardware.h" +#include "common.h" #include "devices-imx27.h" +#include "iomux-mx27.h" static const int mx27ipcam_pins[] __initconst = { /* UART1 */ diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 1f45b9189229..fc8dce931378 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -20,11 +20,11 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx27.h> +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" static const int mx27lite_pins[] __initconst = { /* UART1 */ diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 29711e95579f..e71e62610eba 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -19,8 +19,9 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/mx53.h> + +#include "common.h" +#include "mx53.h" /* * Lookup table for attaching a specific name and platform_data pointer to @@ -42,9 +43,9 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL), OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL), OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL), - OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL), + OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx21-i2c.0", NULL), + OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx21-i2c.1", NULL), + OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx21-i2c.2", NULL), OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL), OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL), { /* sentinel */ } diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 47c91f7185d2..9511142d436c 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -33,10 +33,44 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/system_misc.h> -#include <mach/common.h> -#include <mach/cpuidle.h> -#include <mach/hardware.h> +#include "common.h" +#include "cpuidle.h" +#include "hardware.h" + +#define IMX6Q_ANALOG_DIGPROG 0x260 + +static int imx6q_revision(void) +{ + struct device_node *np; + void __iomem *base; + static u32 rev; + + if (!rev) { + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); + if (!np) + return IMX_CHIP_REVISION_UNKNOWN; + base = of_iomap(np, 0); + if (!base) { + of_node_put(np); + return IMX_CHIP_REVISION_UNKNOWN; + } + rev = readl_relaxed(base + IMX6Q_ANALOG_DIGPROG); + iounmap(base); + of_node_put(np); + } + + switch (rev & 0xff) { + case 0: + return IMX_CHIP_REVISION_1_0; + case 1: + return IMX_CHIP_REVISION_1_1; + case 2: + return IMX_CHIP_REVISION_1_2; + default: + return IMX_CHIP_REVISION_UNKNOWN; + } +} void imx6q_restart(char mode, const char *cmd) { @@ -192,6 +226,7 @@ static void __init imx6q_timer_init(void) { mx6q_clocks_init(); twd_local_timer_of_register(); + imx_print_silicon_rev("i.MX6Q", imx6q_revision()); } static struct sys_timer imx6q_timer = { diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 0330078ff788..2e536ea53444 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -36,11 +36,10 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> - +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" #define KZM_ARM11_IO_ADDRESS(x) (IOMEM( \ IMX_IO_P2V_MODULE(x, MX31_CS4) ?: \ diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 667f359a2e8b..06b483783e68 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -23,11 +23,10 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx1.h> - +#include "common.h" #include "devices-imx1.h" +#include "hardware.h" +#include "iomux-mx1.h" static const int mx1ads_pins[] __initconst = { /* UART1 */ diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index ed22e3fe6ec8..6adb3136bb08 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -18,15 +18,15 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/physmap.h> #include <linux/gpio.h> -#include <mach/common.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/iomux-mx21.h> +#include "common.h" #include "devices-imx21.h" +#include "hardware.h" +#include "iomux-mx21.h" /* * Memory-mapped I/O on MX21ADS base board diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index ce247fd1269a..b1b03aa55bb8 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -31,17 +31,17 @@ #include <linux/platform_device.h> #include <linux/usb/otg.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/memory.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/mx25.h> -#include <mach/iomux-mx25.h> +#include "common.h" #include "devices-imx25.h" +#include "hardware.h" +#include "iomux-mx25.h" +#include "mx25.h" #define MX25PDK_CAN_PWDN IMX_GPIO_NR(4, 6) diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 05996f39005c..d0e547fa925f 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -36,13 +36,13 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx27.h> -#include <mach/ulpi.h> -#include <mach/3ds_debugboard.h> +#include "3ds_debugboard.h" +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" +#include "ulpi.h" #define SD1_EN_GPIO IMX_GPIO_NR(2, 25) #define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23) diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 7dc59bac0e55..3d036f57f0e6 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -21,15 +21,15 @@ #include <linux/mtd/physmap.h> #include <linux/i2c.h> #include <linux/irq.h> -#include <mach/common.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/iomux-mx27.h> +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" /* * Base address of PBC controller, CS4 diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 8915f937b7d5..bc301befdd06 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -30,19 +30,19 @@ #include <media/soc_camera.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/memory.h> #include <asm/mach/map.h> #include <asm/memblock.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/3ds_debugboard.h> -#include <mach/ulpi.h> +#include "3ds_debugboard.h" +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" static int mx31_3ds_pins[] = { /* UART1 */ @@ -393,7 +393,7 @@ static struct regulator_init_data gpo_init = { }; static struct regulator_consumer_supply vmmc2_consumers[] = { - REGULATOR_SUPPLY("vmmc", "mxc-mmc.0"), + REGULATOR_SUPPLY("vmmc", "imx31-mmc.0"), }; static struct regulator_init_data vmmc2_init = { diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index e774b07f48d3..8b56f8883f32 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -28,8 +28,6 @@ #include <asm/mach/time.h> #include <asm/memory.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 #include <linux/mfd/wm8350/audio.h> @@ -37,7 +35,10 @@ #include <linux/mfd/wm8350/pmic.h> #endif +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" /* Base address of PBC controller */ #define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 34b9bf075daf..08b9965c8b36 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -42,13 +42,12 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/board-mx31lilly.h> -#include <mach/ulpi.h> - +#include "board-mx31lilly.h" +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" /* * This file contains module-specific initialization routines for LILLY-1131. diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index ef57cff5abfb..bdcd92e59518 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -39,13 +39,12 @@ #include <asm/page.h> #include <asm/setup.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/board-mx31lite.h> -#include <mach/iomux-mx3.h> -#include <mach/ulpi.h> - +#include "board-mx31lite.h" +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" /* * This file contains the module-specific initialization routines. diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 459e754ef8c9..2517cfa9f26b 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -42,14 +42,14 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> #include <asm/memblock.h> -#include <mach/board-mx31moboard.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> -#include <mach/ulpi.h> #include <linux/platform_data/asoc-imx-ssi.h> +#include "board-mx31moboard.h" +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" static unsigned int moboard_pins[] = { /* UART0 */ @@ -175,11 +175,11 @@ static const struct spi_imx_master moboard_spi1_pdata __initconst = { static struct regulator_consumer_supply sdhc_consumers[] = { { - .dev_name = "mxc-mmc.0", + .dev_name = "imx31-mmc.0", .supply = "sdhc0_vcc", }, { - .dev_name = "mxc-mmc.1", + .dev_name = "imx31-mmc.1", .supply = "sdhc1_vcc", }, }; diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 504983c68aa8..5277da45d60c 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -43,15 +43,15 @@ #include <asm/mach/map.h> #include <asm/memblock.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx35.h> -#include <mach/3ds_debugboard.h> #include <video/platform_lcd.h> #include <media/soc_camera.h> +#include "3ds_debugboard.h" +#include "common.h" #include "devices-imx35.h" +#include "hardware.h" +#include "iomux-mx35.h" #define GPIO_MC9S08DZ60_GPS_ENABLE 0 #define GPIO_MC9S08DZ60_HDD_ENABLE 4 diff --git a/arch/arm/mach-imx/mach-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c index 42b66e8d9615..0c1f88a80bdc 100644 --- a/arch/arm/mach-imx/mach-mx50_rdp.c +++ b/arch/arm/mach-imx/mach-mx50_rdp.c @@ -24,17 +24,16 @@ #include <linux/delay.h> #include <linux/io.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx50.h> - #include <asm/irq.h> #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "common.h" #include "devices-imx50.h" +#include "hardware.h" +#include "iomux-mx50.h" #define FEC_EN IMX_GPIO_NR(6, 23) #define FEC_RESET_B IMX_GPIO_NR(4, 12) diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c index 9ee84a4af639..abc25bd1107b 100644 --- a/arch/arm/mach-imx/mach-mx51_3ds.c +++ b/arch/arm/mach-imx/mach-mx51_3ds.c @@ -19,12 +19,11 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx51.h> -#include <mach/3ds_debugboard.h> - +#include "3ds_debugboard.h" +#include "common.h" #include "devices-imx51.h" +#include "hardware.h" +#include "iomux-mx51.h" #define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28) diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index 7b31cbde8775..d9a84ca2199a 100644 --- a/arch/arm/mach-imx/mach-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c @@ -20,17 +20,16 @@ #include <linux/spi/flash.h> #include <linux/spi/spi.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx51.h> - #include <asm/setup.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "common.h" #include "devices-imx51.h" #include "cpu_op-mx51.h" +#include "hardware.h" +#include "iomux-mx51.h" #define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7) #define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27) diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index 0bf6d30aa32d..f4a8c7e108e1 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -21,17 +21,17 @@ #include <linux/mtd/physmap.h> #include <linux/i2c.h> #include <linux/irq.h> -#include <mach/common.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> #include <linux/gpio.h> -#include <mach/iomux-mx27.h> #include <linux/i2c/pca953x.h> +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" static const int mxt_td60_pins[] __initconst = { /* UART0 */ diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index de8516b7d69f..eee369fa94a2 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -32,13 +32,13 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx27.h> #include <asm/mach/time.h> -#include <mach/ulpi.h> +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" +#include "ulpi.h" #define OTG_PHY_CS_GPIO (GPIO_PORTB + 23) #define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24) diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index e3c45130fb3c..547fef133f65 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -42,13 +42,13 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> #include <asm/memblock.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> -#include <mach/ulpi.h> +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" #include "pcm037.h" +#include "ulpi.h" static enum pcm037_board_variant pcm037_instance = PCM037_PCM970; diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c index 11ffa81ad17d..8fd8255068ee 100644 --- a/arch/arm/mach-imx/mach-pcm037_eet.c +++ b/arch/arm/mach-imx/mach-pcm037_eet.c @@ -11,13 +11,12 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> - #include <asm/mach-types.h> #include "pcm037.h" +#include "common.h" #include "devices-imx31.h" +#include "iomux-mx3.h" static unsigned int pcm037_eet_pins[] = { /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */ diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 95f49d936fd3..4aa0d0798605 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -33,13 +33,12 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/board-pcm038.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx27.h> -#include <mach/ulpi.h> - +#include "board-pcm038.h" +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" +#include "ulpi.h" static const int pcm038_pins[] __initconst = { /* UART1 */ @@ -212,7 +211,7 @@ static const struct spi_imx_master pcm038_spi0_data __initconst = { static struct regulator_consumer_supply sdhc1_consumers[] = { { - .dev_name = "mxc-mmc.1", + .dev_name = "imx21-mmc.1", .supply = "sdhc_vcc", }, }; diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index e4bd4387e344..92445440221e 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -33,12 +33,11 @@ #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx35.h> -#include <mach/ulpi.h> - +#include "common.h" #include "devices-imx35.h" +#include "hardware.h" +#include "iomux-mx35.h" +#include "ulpi.h" static const struct fb_videomode fb_modedb[] = { { diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index fb25fbd31226..96d9a91f8a3b 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -21,17 +21,17 @@ #include <linux/mtd/nand.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> -#include <mach/common.h> #include <asm/page.h> #include <asm/setup.h> -#include <mach/iomux-mx3.h> +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" /* FPGA defines */ #define QONG_FPGA_VERSION(major, minor, rev) \ diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index 67ff38e9a3ca..fc970409dbaf 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -20,11 +20,10 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx1.h> - +#include "common.h" #include "devices-imx1.h" +#include "hardware.h" +#include "iomux-mx1.h" /* * This scb9328 has a 32MiB flash diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 39eb7960e2a4..3aecf91e4289 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -28,15 +28,14 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx35.h> - #include <linux/i2c.h> #include <linux/i2c/at24.h> #include <linux/mfd/mc13xxx.h> +#include "common.h" #include "devices-imx35.h" +#include "hardware.h" +#include "iomux-mx35.h" #define GPIO_LCDPWR IMX_GPIO_NR(1, 2) #define GPIO_PMIC_INT IMX_GPIO_NR(2, 0) diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 6d60d51868bc..7a146671e65a 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -22,9 +22,10 @@ #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-v1.h> +#include "common.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v1.h" static struct map_desc imx_io_desc[] __initdata = { imx_map_entry(MX1, IO, MT_DEVICE), @@ -58,5 +59,7 @@ void __init imx1_soc_init(void) MX1_GPIO_INT_PORTC, 0); mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256, MX1_GPIO_INT_PORTD, 0); + imx_add_imx_dma("imx1-dma", MX1_DMA_BASE_ADDR, + MX1_DMA_INT, MX1_DMA_ERR); pinctrl_provide_dummies(); } diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index d056dad0940d..d8ccd3a8ec53 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -21,12 +21,13 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/pinctrl/machine.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/devices-common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/iomux-v1.h> + +#include "common.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v1.h" /* MX21 memory map definition */ static struct map_desc imx21_io_desc[] __initdata = { @@ -81,6 +82,8 @@ static const struct resource imx21_audmux_res[] __initconst = { void __init imx21_soc_init(void) { + mxc_device_init(); + mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); @@ -89,7 +92,8 @@ void __init imx21_soc_init(void) mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); pinctrl_provide_dummies(); - imx_add_imx_dma(); + imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR, + MX21_INT_DMACH0, 0); /* No ERR irq */ platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res, ARRAY_SIZE(imx21_audmux_res)); } diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index f3f5c6542ab4..9357707bb7af 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -24,11 +24,11 @@ #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/devices-common.h> -#include <mach/hardware.h> -#include <mach/mx25.h> -#include <mach/iomux-v3.h> +#include "common.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v3.h" +#include "mx25.h" /* * This table defines static virtual address mappings for I/O regions. @@ -89,6 +89,8 @@ static const struct resource imx25_audmux_res[] __initconst = { void __init imx25_soc_init(void) { + mxc_device_init(); + /* i.mx25 has the i.mx35 type gpio */ mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index e7e24afc45ed..4f1be65a7b5f 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -21,12 +21,13 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/pinctrl/machine.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/devices-common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/iomux-v1.h> + +#include "common.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v1.h" /* MX27 memory map definition */ static struct map_desc imx27_io_desc[] __initdata = { @@ -81,6 +82,8 @@ static const struct resource imx27_audmux_res[] __initconst = { void __init imx27_soc_init(void) { + mxc_device_init(); + /* i.mx27 has the i.mx21 type gpio */ mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); @@ -90,7 +93,8 @@ void __init imx27_soc_init(void) mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); pinctrl_provide_dummies(); - imx_add_imx_dma(); + imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR, + MX27_INT_DMACH0, 0); /* No ERR irq */ /* imx27 has the imx21 type audmux */ platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res, ARRAY_SIZE(imx27_audmux_res)); diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index b5deb0554552..cefa047c4053 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -26,12 +26,11 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/devices-common.h> -#include <mach/hardware.h> -#include <mach/iomux-v3.h> - +#include "common.h" #include "crmregs-imx3.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v3.h" void __iomem *mx3_ccm_base; @@ -175,6 +174,8 @@ void __init imx31_soc_init(void) imx3_init_l2x0(); + mxc_device_init(); + mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); @@ -271,6 +272,8 @@ void __init imx35_soc_init(void) imx3_init_l2x0(); + mxc_device_init(); + mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index acb0aadb4255..f92caf1b30ba 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -18,10 +18,10 @@ #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/devices-common.h> -#include <mach/iomux-v3.h> +#include "common.h" +#include "devices/devices-common.h" +#include "hardware.h" +#include "iomux-v3.h" /* * Define the MX50 memory map. @@ -138,6 +138,8 @@ static const struct resource imx51_audmux_res[] __initconst = { void __init imx50_soc_init(void) { + mxc_device_init(); + /* i.mx50 has the i.mx35 type gpio */ mxc_register_gpio("imx35-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); mxc_register_gpio("imx35-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); @@ -153,6 +155,8 @@ void __init imx50_soc_init(void) void __init imx51_soc_init(void) { + mxc_device_init(); + /* i.mx51 has the i.mx35 type gpio */ mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH); mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH); diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/mach-imx/mx1.h index 45bd31cc34d6..45bd31cc34d6 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/mach-imx/mx1.h diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/mach-imx/mx21.h index 468738aa997f..468738aa997f 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/mach-imx/mx21.h diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/mach-imx/mx25.h index ec466400a200..ec466400a200 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/mach-imx/mx25.h diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/mach-imx/mx27.h index e074616d54ca..e074616d54ca 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/mach-imx/mx27.h diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/mach-imx/mx2x.h index 11642f5b224c..11642f5b224c 100644 --- a/arch/arm/plat-mxc/include/mach/mx2x.h +++ b/arch/arm/mach-imx/mx2x.h diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/mach-imx/mx31.h index ee9b1f9215df..ee9b1f9215df 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/mach-imx/mx31.h diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c index 29e890f92055..d4361b80c5fb 100644 --- a/arch/arm/mach-imx/mx31lilly-db.c +++ b/arch/arm/mach-imx/mx31lilly-db.c @@ -30,12 +30,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/board-mx31lilly.h> - +#include "board-mx31lilly.h" +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" /* * This file contains board-specific initialization routines for the diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c index 83d17d9e0bc8..5a160b7e4fce 100644 --- a/arch/arm/mach-imx/mx31lite-db.c +++ b/arch/arm/mach-imx/mx31lite-db.c @@ -31,12 +31,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/board-mx31lite.h> - +#include "board-mx31lite.h" +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" /* * This file contains board-specific initialization routines for the diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c index cc285e507286..52d5b1574721 100644 --- a/arch/arm/mach-imx/mx31moboard-devboard.c +++ b/arch/arm/mach-imx/mx31moboard-devboard.c @@ -22,12 +22,11 @@ #include <linux/usb/otg.h> -#include <mach/common.h> -#include <mach/iomux-mx3.h> -#include <mach/hardware.h> -#include <mach/ulpi.h> - +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" static unsigned int devboard_pins[] = { /* UART1 */ diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c index 135c90e3a45f..a4f43e90f3c1 100644 --- a/arch/arm/mach-imx/mx31moboard-marxbot.c +++ b/arch/arm/mach-imx/mx31moboard-marxbot.c @@ -24,14 +24,13 @@ #include <linux/usb/otg.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> -#include <mach/ulpi.h> - #include <media/soc_camera.h> +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" static unsigned int marxbot_pins[] = { /* SDHC2 */ diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c index fabb801e7994..04ae45dbfaa7 100644 --- a/arch/arm/mach-imx/mx31moboard-smartbot.c +++ b/arch/arm/mach-imx/mx31moboard-smartbot.c @@ -23,15 +23,14 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/iomux-mx3.h> -#include <mach/board-mx31moboard.h> -#include <mach/ulpi.h> - #include <media/soc_camera.h> +#include "board-mx31moboard.h" +#include "common.h" #include "devices-imx31.h" +#include "hardware.h" +#include "iomux-mx3.h" +#include "ulpi.h" static unsigned int smartbot_pins[] = { /* UART1 */ diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/mach-imx/mx35.h index 2af5d3a699c7..2af5d3a699c7 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/mach-imx/mx35.h diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/mach-imx/mx3x.h index 96fb4fbc8ad7..96fb4fbc8ad7 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/mach-imx/mx3x.h diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/mach-imx/mx50.h index 09ac19c1570c..09ac19c1570c 100644 --- a/arch/arm/plat-mxc/include/mach/mx50.h +++ b/arch/arm/mach-imx/mx50.h diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/mach-imx/mx51.h index af844f76261a..af844f76261a 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/mach-imx/mx51.h diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/mach-imx/mx53.h index f829d1c22501..f829d1c22501 100644 --- a/arch/arm/plat-mxc/include/mach/mx53.h +++ b/arch/arm/mach-imx/mx53.h diff --git a/arch/arm/plat-mxc/include/mach/mx6q.h b/arch/arm/mach-imx/mx6q.h index f7e7dbac8f4b..19d3f54db5af 100644 --- a/arch/arm/plat-mxc/include/mach/mx6q.h +++ b/arch/arm/mach-imx/mx6q.h @@ -27,9 +27,5 @@ #define MX6Q_CCM_SIZE 0x4000 #define MX6Q_ANATOP_BASE_ADDR 0x020c8000 #define MX6Q_ANATOP_SIZE 0x1000 -#define MX6Q_UART2_BASE_ADDR 0x021e8000 -#define MX6Q_UART2_SIZE 0x4000 -#define MX6Q_UART4_BASE_ADDR 0x021f0000 -#define MX6Q_UART4_SIZE 0x4000 #endif /* __MACH_MX6Q_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/mach-imx/mxc.h index d78298366a91..d78298366a91 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/mach-imx/mxc.h diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c index 9917e2ff51da..51c608234089 100644 --- a/arch/arm/mach-imx/pcm970-baseboard.c +++ b/arch/arm/mach-imx/pcm970-baseboard.c @@ -23,11 +23,10 @@ #include <asm/mach/arch.h> -#include <mach/common.h> -#include <mach/iomux-mx27.h> -#include <mach/hardware.h> - +#include "common.h" #include "devices-imx27.h" +#include "hardware.h" +#include "iomux-mx27.h" static const int pcm970_pins[] __initconst = { /* SDHC */ diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 2ac43e1a2dfd..3777b805b76b 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -16,8 +16,9 @@ #include <asm/smp_scu.h> #include <asm/hardware/gic.h> #include <asm/mach/map.h> -#include <mach/common.h> -#include <mach/hardware.h> + +#include "common.h" +#include "hardware.h" static void __iomem *scu_base; diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index 6fcffa7db978..56d02d064fbf 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -10,7 +10,8 @@ #include <linux/kernel.h> #include <linux/suspend.h> #include <linux/io.h> -#include <mach/hardware.h> + +#include "hardware.h" static int mx27_suspend_enter(suspend_state_t state) { diff --git a/arch/arm/mach-imx/pm-imx3.c b/arch/arm/mach-imx/pm-imx3.c index 822103bdb709..6a07006ff0f4 100644 --- a/arch/arm/mach-imx/pm-imx3.c +++ b/arch/arm/mach-imx/pm-imx3.c @@ -9,10 +9,11 @@ * http://www.gnu.org/copyleft/gpl.html */ #include <linux/io.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include <mach/devices-common.h> + +#include "common.h" #include "crmregs-imx3.h" +#include "devices/devices-common.h" +#include "hardware.h" /* * Set cpu low power mode before WFI instruction. This function is called diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index 19621ed1ffa5..2e063c2deb9e 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -16,10 +16,11 @@ #include <asm/cacheflush.h> #include <asm/system_misc.h> #include <asm/tlbflush.h> -#include <mach/common.h> -#include <mach/cpuidle.h> -#include <mach/hardware.h> + +#include "common.h" +#include "cpuidle.h" #include "crm-regs-imx5.h" +#include "hardware.h" /* * The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit. diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index f7b0c2b1b905..a17543da602d 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -18,8 +18,9 @@ #include <asm/proc-fns.h> #include <asm/suspend.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/common.h> -#include <mach/hardware.h> + +#include "common.h" +#include "hardware.h" extern unsigned long phys_l2x0_saved_regs; diff --git a/arch/arm/plat-mxc/ssi-fiq-ksym.c b/arch/arm/mach-imx/ssi-fiq-ksym.c index 792090f9a032..792090f9a032 100644 --- a/arch/arm/plat-mxc/ssi-fiq-ksym.c +++ b/arch/arm/mach-imx/ssi-fiq-ksym.c diff --git a/arch/arm/plat-mxc/ssi-fiq.S b/arch/arm/mach-imx/ssi-fiq.S index a8b93c5f29b5..a8b93c5f29b5 100644 --- a/arch/arm/plat-mxc/ssi-fiq.S +++ b/arch/arm/mach-imx/ssi-fiq.S diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/mach-imx/system.c index 3da78cfc5a94..695e0d73bf85 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/mach-imx/system.c @@ -22,12 +22,13 @@ #include <linux/err.h> #include <linux/delay.h> -#include <mach/hardware.h> -#include <mach/common.h> #include <asm/system_misc.h> #include <asm/proc-fns.h> #include <asm/mach-types.h> +#include "common.h" +#include "hardware.h" + static void __iomem *wdog_base; /* diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/mach-imx/time.c index a17abcf98325..f017302f6d09 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/mach-imx/time.c @@ -27,10 +27,11 @@ #include <linux/clk.h> #include <linux/err.h> -#include <mach/hardware.h> #include <asm/sched_clock.h> #include <asm/mach/time.h> -#include <mach/common.h> + +#include "common.h" +#include "hardware.h" /* * There are 2 versions of the timer hardware on Freescale MXC hardware. diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/mach-imx/tzic.c index 3ed1adbc09f8..9721161f208f 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/mach-imx/tzic.c @@ -21,10 +21,8 @@ #include <asm/mach/irq.h> #include <asm/exception.h> -#include <mach/hardware.h> -#include <mach/common.h> -#include <mach/irqs.h> - +#include "common.h" +#include "hardware.h" #include "irq-common.h" /* diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/mach-imx/ulpi.c index d2963427184f..0f051957d10c 100644 --- a/arch/arm/plat-mxc/ulpi.c +++ b/arch/arm/mach-imx/ulpi.c @@ -24,7 +24,7 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> -#include <mach/ulpi.h> +#include "ulpi.h" /* ULPIVIEW register bits */ #define ULPIVW_WU (1 << 31) /* Wakeup */ diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/mach-imx/ulpi.h index 42bdaca6d7d9..42bdaca6d7d9 100644 --- a/arch/arm/plat-mxc/include/mach/ulpi.h +++ b/arch/arm/mach-imx/ulpi.h diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 350e26636a06..abeff25532ab 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -8,6 +8,7 @@ config ARCH_INTEGRATOR_AP select MIGHT_HAVE_PCI select SERIAL_AMBA_PL010 select SERIAL_AMBA_PL010_CONSOLE + select SOC_BUS help Include support for the ARM(R) Integrator/AP and Integrator/PP2 platforms. @@ -19,6 +20,7 @@ config ARCH_INTEGRATOR_CP select PLAT_VERSATILE_CLCD select SERIAL_AMBA_PL011 select SERIAL_AMBA_PL011_CONSOLE + select SOC_BUS help Include support for the ARM(R) Integrator CP platform. diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h index c3ff21b5ea24..79197d8b34aa 100644 --- a/arch/arm/mach-integrator/common.h +++ b/arch/arm/mach-integrator/common.h @@ -1,6 +1,12 @@ #include <linux/amba/serial.h> -extern struct amba_pl010_data integrator_uart_data; +#ifdef CONFIG_ARCH_INTEGRATOR_AP +extern struct amba_pl010_data ap_uart_data; +#else +/* Not used without Integrator/AP support anyway */ +struct amba_pl010_data ap_uart_data {}; +#endif void integrator_init_early(void); int integrator_init(bool is_cp); void integrator_reserve(void); void integrator_restart(char, const char *); +void integrator_init_sysfs(struct device *parent, u32 id); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index ea22a17246d7..39c060f75e47 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -18,10 +18,10 @@ #include <linux/memblock.h> #include <linux/sched.h> #include <linux/smp.h> -#include <linux/termios.h> #include <linux/amba/bus.h> #include <linux/amba/serial.h> #include <linux/io.h> +#include <linux/stat.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -46,10 +46,10 @@ static AMBA_APB_DEVICE(rtc, "rtc", 0, INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL); static AMBA_APB_DEVICE(uart0, "uart0", 0, - INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data); + INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, NULL); static AMBA_APB_DEVICE(uart1, "uart1", 0, - INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data); + INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, NULL); static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL); static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL); @@ -77,6 +77,8 @@ int __init integrator_init(bool is_cp) uart1_device.periphid = 0x00041010; kmi0_device.periphid = 0x00041050; kmi1_device.periphid = 0x00041050; + uart0_device.dev.platform_data = &ap_uart_data; + uart1_device.dev.platform_data = &ap_uart_data; } for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { @@ -89,49 +91,6 @@ int __init integrator_init(bool is_cp) #endif -/* - * On the Integrator platform, the port RTS and DTR are provided by - * bits in the following SC_CTRLS register bits: - * RTS DTR - * UART0 7 6 - * UART1 5 4 - */ -#define SC_CTRLC __io_address(INTEGRATOR_SC_CTRLC) -#define SC_CTRLS __io_address(INTEGRATOR_SC_CTRLS) - -static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl) -{ - unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask; - u32 phybase = dev->res.start; - - if (phybase == INTEGRATOR_UART0_BASE) { - /* UART0 */ - rts_mask = 1 << 4; - dtr_mask = 1 << 5; - } else { - /* UART1 */ - rts_mask = 1 << 6; - dtr_mask = 1 << 7; - } - - if (mctrl & TIOCM_RTS) - ctrlc |= rts_mask; - else - ctrls |= rts_mask; - - if (mctrl & TIOCM_DTR) - ctrlc |= dtr_mask; - else - ctrls |= dtr_mask; - - __raw_writel(ctrls, SC_CTRLS); - __raw_writel(ctrlc, SC_CTRLC); -} - -struct amba_pl010_data integrator_uart_data = { - .set_mctrl = integrator_uart_set_mctrl, -}; - static DEFINE_RAW_SPINLOCK(cm_lock); /** @@ -169,3 +128,93 @@ void integrator_restart(char mode, const char *cmd) { cm_control(CM_CTRL_RESET, CM_CTRL_RESET); } + +static u32 integrator_id; + +static ssize_t intcp_get_manf(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%02x\n", integrator_id >> 24); +} + +static struct device_attribute intcp_manf_attr = + __ATTR(manufacturer, S_IRUGO, intcp_get_manf, NULL); + +static ssize_t intcp_get_arch(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + const char *arch; + + switch ((integrator_id >> 16) & 0xff) { + case 0x00: + arch = "ASB little-endian"; + break; + case 0x01: + arch = "AHB little-endian"; + break; + case 0x03: + arch = "AHB-Lite system bus, bi-endian"; + break; + case 0x04: + arch = "AHB"; + break; + default: + arch = "Unknown"; + break; + } + + return sprintf(buf, "%s\n", arch); +} + +static struct device_attribute intcp_arch_attr = + __ATTR(architecture, S_IRUGO, intcp_get_arch, NULL); + +static ssize_t intcp_get_fpga(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + const char *fpga; + + switch ((integrator_id >> 12) & 0xf) { + case 0x01: + fpga = "XC4062"; + break; + case 0x02: + fpga = "XC4085"; + break; + case 0x04: + fpga = "EPM7256AE (Altera PLD)"; + break; + default: + fpga = "Unknown"; + break; + } + + return sprintf(buf, "%s\n", fpga); +} + +static struct device_attribute intcp_fpga_attr = + __ATTR(fpga, S_IRUGO, intcp_get_fpga, NULL); + +static ssize_t intcp_get_build(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%02x\n", (integrator_id >> 4) & 0xFF); +} + +static struct device_attribute intcp_build_attr = + __ATTR(build, S_IRUGO, intcp_get_build, NULL); + + + +void integrator_init_sysfs(struct device *parent, u32 id) +{ + integrator_id = id; + device_create_file(parent, &intcp_manf_attr); + device_create_file(parent, &intcp_arch_attr); + device_create_file(parent, &intcp_fpga_attr); + device_create_file(parent, &intcp_build_attr); +} diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index efeac5d0bc9e..be5859efe10e 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -190,7 +190,6 @@ #define INTEGRATOR_SC_CTRLC_OFFSET 0x0C #define INTEGRATOR_SC_DEC_OFFSET 0x10 #define INTEGRATOR_SC_ARB_OFFSET 0x14 -#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18 #define INTEGRATOR_SC_LOCK_OFFSET 0x1C #define INTEGRATOR_SC_BASE 0x11000000 diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index e6617c134faf..a0a7cbbb7a70 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -37,6 +37,9 @@ #include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/of_platform.h> +#include <linux/stat.h> +#include <linux/sys_soc.h> +#include <linux/termios.h> #include <video/vga.h> #include <mach/hardware.h> @@ -60,7 +63,10 @@ #include "common.h" -/* +/* Base address to the AP system controller */ +void __iomem *ap_syscon_base; + +/* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx * is the (PA >> 12). * @@ -68,7 +74,6 @@ * just for now). */ #define VA_IC_BASE __io_address(INTEGRATOR_IC_BASE) -#define VA_SC_BASE __io_address(INTEGRATOR_SC_BASE) #define VA_EBI_BASE __io_address(INTEGRATOR_EBI_BASE) #define VA_CMIC_BASE __io_address(INTEGRATOR_HDR_IC) @@ -97,11 +102,6 @@ static struct map_desc ap_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), .length = SZ_4K, @@ -122,11 +122,6 @@ static struct map_desc ap_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE), .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE), .length = SZ_4K, @@ -201,8 +196,6 @@ device_initcall(irq_syscore_init); /* * Flash handling. */ -#define SC_CTRLC (VA_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET) -#define SC_CTRLS (VA_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET) #define EBI_CSR1 (VA_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET) #define EBI_LOCK (VA_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET) @@ -210,7 +203,8 @@ static int ap_flash_init(struct platform_device *dev) { u32 tmp; - writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, SC_CTRLC); + writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, + ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); tmp = readl(EBI_CSR1) | INTEGRATOR_EBI_WRITE_ENABLE; writel(tmp, EBI_CSR1); @@ -227,7 +221,8 @@ static void ap_flash_exit(struct platform_device *dev) { u32 tmp; - writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, SC_CTRLC); + writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, + ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); tmp = readl(EBI_CSR1) & ~INTEGRATOR_EBI_WRITE_ENABLE; writel(tmp, EBI_CSR1); @@ -241,9 +236,12 @@ static void ap_flash_exit(struct platform_device *dev) static void ap_flash_set_vpp(struct platform_device *pdev, int on) { - void __iomem *reg = on ? SC_CTRLS : SC_CTRLC; - - writel(INTEGRATOR_SC_CTRL_nFLVPPEN, reg); + if (on) + writel(INTEGRATOR_SC_CTRL_nFLVPPEN, + ap_syscon_base + INTEGRATOR_SC_CTRLS_OFFSET); + else + writel(INTEGRATOR_SC_CTRL_nFLVPPEN, + ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); } static struct physmap_flash_data ap_flash_data = { @@ -254,6 +252,45 @@ static struct physmap_flash_data ap_flash_data = { }; /* + * For the PL010 found in the Integrator/AP some of the UART control is + * implemented in the system controller and accessed using a callback + * from the driver. + */ +static void integrator_uart_set_mctrl(struct amba_device *dev, + void __iomem *base, unsigned int mctrl) +{ + unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask; + u32 phybase = dev->res.start; + + if (phybase == INTEGRATOR_UART0_BASE) { + /* UART0 */ + rts_mask = 1 << 4; + dtr_mask = 1 << 5; + } else { + /* UART1 */ + rts_mask = 1 << 6; + dtr_mask = 1 << 7; + } + + if (mctrl & TIOCM_RTS) + ctrlc |= rts_mask; + else + ctrls |= rts_mask; + + if (mctrl & TIOCM_DTR) + ctrlc |= dtr_mask; + else + ctrls |= dtr_mask; + + __raw_writel(ctrls, ap_syscon_base + INTEGRATOR_SC_CTRLS_OFFSET); + __raw_writel(ctrlc, ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); +} + +struct amba_pl010_data ap_uart_data = { + .set_mctrl = integrator_uart_set_mctrl, +}; + +/* * Where is the timer (VA)? */ #define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE) @@ -450,9 +487,9 @@ static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE, "rtc", NULL), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE, - "uart0", &integrator_uart_data), + "uart0", &ap_uart_data), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE, - "uart1", &integrator_uart_data), + "uart1", &ap_uart_data), OF_DEV_AUXDATA("arm,primecell", KMI0_BASE, "kmi0", NULL), OF_DEV_AUXDATA("arm,primecell", KMI1_BASE, @@ -465,12 +502,60 @@ static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = { static void __init ap_init_of(void) { unsigned long sc_dec; + struct device_node *root; + struct device_node *syscon; + struct device *parent; + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + u32 ap_sc_id; + int err; int i; - of_platform_populate(NULL, of_default_bus_match_table, - ap_auxdata_lookup, NULL); + /* Here we create an SoC device for the root node */ + root = of_find_node_by_path("/"); + if (!root) + return; + syscon = of_find_node_by_path("/syscon"); + if (!syscon) + return; + + ap_syscon_base = of_iomap(syscon, 0); + if (!ap_syscon_base) + return; - sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET); + ap_sc_id = readl(ap_syscon_base); + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return; + + err = of_property_read_string(root, "compatible", + &soc_dev_attr->soc_id); + if (err) + return; + err = of_property_read_string(root, "model", &soc_dev_attr->machine); + if (err) + return; + soc_dev_attr->family = "Integrator"; + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c", + 'A' + (ap_sc_id & 0x0f)); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR_OR_NULL(soc_dev)) { + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr); + return; + } + + parent = soc_device_to_device(soc_dev); + + if (!IS_ERR_OR_NULL(parent)) + integrator_init_sysfs(parent, ap_sc_id); + + of_platform_populate(root, of_default_bus_match_table, + ap_auxdata_lookup, parent); + + sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); for (i = 0; i < 4; i++) { struct lm_device *lmdev; @@ -514,6 +599,27 @@ MACHINE_END #ifdef CONFIG_ATAGS /* + * For the ATAG boot some static mappings are needed. This will + * go away with the ATAG support down the road. + */ + +static struct map_desc ap_io_desc_atag[] __initdata = { + { + .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, +}; + +static void __init ap_map_io_atag(void) +{ + iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag)); + ap_syscon_base = __io_address(INTEGRATOR_SC_BASE); + ap_map_io(); +} + +/* * This is where non-devicetree initialization code is collected and stashed * for eventual deletion. */ @@ -581,7 +687,7 @@ static void __init ap_init(void) platform_device_register(&cfi_flash_device); - sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET); + sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); for (i = 0; i < 4; i++) { struct lm_device *lmdev; @@ -608,7 +714,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .atag_offset = 0x100, .reserve = integrator_reserve, - .map_io = ap_map_io, + .map_io = ap_map_io_atag, .nr_irqs = NR_IRQS_INTEGRATOR_AP, .init_early = ap_init_early, .init_irq = ap_init_irq, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 5b08e8e4cc83..29df06b35d0d 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -26,6 +26,7 @@ #include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/of_platform.h> +#include <linux/sys_soc.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -51,11 +52,13 @@ #include "common.h" +/* Base address to the CP controller */ +static void __iomem *intcp_con_base; + #define INTCP_PA_FLASH_BASE 0x24000000 #define INTCP_PA_CLCD_BASE 0xc0000000 -#define INTCP_VA_CTRL_BASE __io_address(INTEGRATOR_CP_CTL_BASE) #define INTCP_FLASHPROG 0x04 #define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0) #define CINTEGRATOR_FLASHPROG_FLWREN (1 << 1) @@ -82,11 +85,6 @@ static struct map_desc intcp_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), .length = SZ_4K, @@ -107,11 +105,6 @@ static struct map_desc intcp_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE), .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE), .length = SZ_4K, @@ -126,11 +119,6 @@ static struct map_desc intcp_io_desc[] __initdata = { .pfn = __phys_to_pfn(INTEGRATOR_CP_SIC_BASE), .length = SZ_4K, .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE), - .length = SZ_4K, - .type = MT_DEVICE } }; @@ -146,9 +134,9 @@ static int intcp_flash_init(struct platform_device *dev) { u32 val; - val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + val = readl(intcp_con_base + INTCP_FLASHPROG); val |= CINTEGRATOR_FLASHPROG_FLWREN; - writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + writel(val, intcp_con_base + INTCP_FLASHPROG); return 0; } @@ -157,21 +145,21 @@ static void intcp_flash_exit(struct platform_device *dev) { u32 val; - val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + val = readl(intcp_con_base + INTCP_FLASHPROG); val &= ~(CINTEGRATOR_FLASHPROG_FLVPPEN|CINTEGRATOR_FLASHPROG_FLWREN); - writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + writel(val, intcp_con_base + INTCP_FLASHPROG); } static void intcp_flash_set_vpp(struct platform_device *pdev, int on) { u32 val; - val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + val = readl(intcp_con_base + INTCP_FLASHPROG); if (on) val |= CINTEGRATOR_FLASHPROG_FLVPPEN; else val &= ~CINTEGRATOR_FLASHPROG_FLVPPEN; - writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG); + writel(val, intcp_con_base + INTCP_FLASHPROG); } static struct physmap_flash_data intcp_flash_data = { @@ -190,7 +178,7 @@ static struct physmap_flash_data intcp_flash_data = { static unsigned int mmc_status(struct device *dev) { unsigned int status = readl(__io_address(0xca000000 + 4)); - writel(8, __io_address(INTEGRATOR_CP_CTL_BASE + 8)); + writel(8, intcp_con_base + 8); return status & 8; } @@ -318,9 +306,9 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE, "rtc", NULL), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE, - "uart0", &integrator_uart_data), + "uart0", NULL), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE, - "uart1", &integrator_uart_data), + "uart1", NULL), OF_DEV_AUXDATA("arm,primecell", KMI0_BASE, "kmi0", NULL), OF_DEV_AUXDATA("arm,primecell", KMI1_BASE, @@ -338,8 +326,57 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = { static void __init intcp_init_of(void) { - of_platform_populate(NULL, of_default_bus_match_table, - intcp_auxdata_lookup, NULL); + struct device_node *root; + struct device_node *cpcon; + struct device *parent; + struct soc_device *soc_dev; + struct soc_device_attribute *soc_dev_attr; + u32 intcp_sc_id; + int err; + + /* Here we create an SoC device for the root node */ + root = of_find_node_by_path("/"); + if (!root) + return; + cpcon = of_find_node_by_path("/cpcon"); + if (!cpcon) + return; + + intcp_con_base = of_iomap(cpcon, 0); + if (!intcp_con_base) + return; + + intcp_sc_id = readl(intcp_con_base); + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return; + + err = of_property_read_string(root, "compatible", + &soc_dev_attr->soc_id); + if (err) + return; + err = of_property_read_string(root, "model", &soc_dev_attr->machine); + if (err) + return; + soc_dev_attr->family = "Integrator"; + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c", + 'A' + (intcp_sc_id & 0x0f)); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR_OR_NULL(soc_dev)) { + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr); + return; + } + + parent = soc_device_to_device(soc_dev); + + if (!IS_ERR_OR_NULL(parent)) + integrator_init_sysfs(parent, intcp_sc_id); + + of_platform_populate(root, of_default_bus_match_table, + intcp_auxdata_lookup, parent); } static const char * intcp_dt_board_compat[] = { @@ -365,6 +402,28 @@ MACHINE_END #ifdef CONFIG_ATAGS /* + * For the ATAG boot some static mappings are needed. This will + * go away with the ATAG support down the road. + */ + +static struct map_desc intcp_io_desc_atag[] __initdata = { + { + .virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE), + .pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE), + .length = SZ_4K, + .type = MT_DEVICE + }, +}; + +static void __init intcp_map_io_atag(void) +{ + iotable_init(intcp_io_desc_atag, ARRAY_SIZE(intcp_io_desc_atag)); + intcp_con_base = __io_address(INTEGRATOR_CP_CTL_BASE); + intcp_map_io(); +} + + +/* * This is where non-devicetree initialization code is collected and stashed * for eventual deletion. */ @@ -503,7 +562,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .atag_offset = 0x100, .reserve = integrator_reserve, - .map_io = intcp_map_io, + .map_io = intcp_map_io_atag, .nr_irqs = NR_IRQS_INTEGRATOR_CP, .init_early = intcp_init_early, .init_irq = intcp_init_irq, diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index bbeca59df66b..be50e795536d 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -191,12 +191,9 @@ static void __iomem *v3_open_config_window(struct pci_bus *bus, /* * Trap out illegal values */ - if (offset > 255) - BUG(); - if (busnr > 255) - BUG(); - if (devfn > 255) - BUG(); + BUG_ON(offset > 255); + BUG_ON(busnr > 255); + BUG_ON(devfn > 255); if (busnr == 0) { int slot = PCI_SLOT(devfn); @@ -388,9 +385,10 @@ static int __init pci_v3_setup_resources(struct pci_sys_data *sys) * means I can't get additional information on the reason for the pm2fb * problems. I suppose I'll just have to mind-meld with the machine. ;) */ -#define SC_PCI __io_address(INTEGRATOR_SC_PCIENABLE) -#define SC_LBFADDR __io_address(INTEGRATOR_SC_BASE + 0x20) -#define SC_LBFCODE __io_address(INTEGRATOR_SC_BASE + 0x24) +static void __iomem *ap_syscon_base; +#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18 +#define INTEGRATOR_SC_LBFADDR_OFFSET 0x20 +#define INTEGRATOR_SC_LBFCODE_OFFSET 0x24 static int v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -401,13 +399,13 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) char buf[128]; sprintf(buf, "V3 fault: addr 0x%08lx, FSR 0x%03x, PC 0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n", - addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255, + addr, fsr, pc, instr, __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255, v3_readb(V3_LB_ISTAT)); printk(KERN_DEBUG "%s", buf); #endif v3_writeb(V3_LB_ISTAT, 0); - __raw_writel(3, SC_PCI); + __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); /* * If the instruction being executed was a read, @@ -449,15 +447,15 @@ static irqreturn_t v3_irq(int dummy, void *devid) sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x " "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr, - __raw_readl(SC_LBFADDR), - __raw_readl(SC_LBFCODE) & 255, + __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), + __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255, v3_readb(V3_LB_ISTAT)); printascii(buf); #endif v3_writew(V3_PCI_STAT, 0xf000); v3_writeb(V3_LB_ISTAT, 0); - __raw_writel(3, SC_PCI); + __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); #ifdef CONFIG_DEBUG_LL /* @@ -480,6 +478,10 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { sys->mem_offset = PHYS_PCI_MEM_BASE; ret = pci_v3_setup_resources(sys); + /* Remap the Integrator system controller */ + ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); + if (!ap_syscon_base) + return -EINVAL; } return ret; @@ -568,7 +570,7 @@ void __init pci_v3_preinit(void) v3_writeb(V3_LB_ISTAT, 0); v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10)); v3_writeb(V3_LB_IMASK, 0x28); - __raw_writel(3, SC_PCI); + __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); /* * Grab the PCI error interrupt. diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 50bca5032b7e..503d7dd944ff 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -46,6 +46,11 @@ config MACH_GURUPLUG config ARCH_KIRKWOOD_DT bool "Marvell Kirkwood Flattened Device Tree" + select POWER_SUPPLY + select POWER_RESET + select POWER_RESET_GPIO + select REGULATOR + select REGULATOR_FIXED_VOLTAGE select USE_OF help Say 'Y' here if you want your kernel to support the @@ -130,6 +135,63 @@ config MACH_KM_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Keymile Kirkwood Reference Desgin, using Flattened Device Tree. +config MACH_INETSPACE_V2_DT + bool "LaCie Internet Space v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Internet Space v2 NAS, using Flattened Device Tree. + +config MACH_MPLCEC4_DT + bool "MPL CEC4 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + MPL CEC4 (Flattened Device Tree). + +config MACH_NETSPACE_V2_DT + bool "LaCie Network Space v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_MAX_V2_DT + bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Max v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_LITE_V2_DT + bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Lite v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_MINI_V2_DT + bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Mini v2 NAS (aka SafeBox), using Flattened + Device Tree. + +config MACH_OPENBLOCKS_A6_DT + bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Plat'Home OpenBlocks A6 (Flattened Device Tree). + +config MACH_TOPKICK_DT + bool "USI Topkick (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + USI Topkick, using Flattened Device Tree + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help @@ -216,6 +278,14 @@ config MACH_T5325 Say 'Y' here if you want your kernel to support the HP t5325 Thin Client. +config MACH_NSA310_DT + bool "ZyXEL NSA-310 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + select ARM_ATAG_DTB_COMPAT + help + Say 'Y' here if you want your kernel to support the + ZyXEL NSA-310 board (Flattened Device Tree). + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 294779f892d9..8d2e5a96247c 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -31,3 +31,12 @@ obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o +obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o +obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NSA310_DT) += board-nsa310.o +obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o +obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index 43d16d6714b8..a1aa87f09180 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -17,51 +17,11 @@ #include <linux/mv643xx_eth.h> #include <linux/gpio.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data dnskw_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int dnskw_mpp_config[] __initdata = { - MPP13_UART1_TXD, /* Custom ... */ - MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */ - MPP20_SATA1_ACTn, /* LED: White Right HDD */ - MPP21_SATA0_ACTn, /* LED: White Left HDD */ - MPP24_GPIO, - MPP25_GPIO, - MPP26_GPIO, /* LED: Power */ - MPP27_GPIO, /* LED: Red Right HDD */ - MPP28_GPIO, /* LED: Red Left HDD */ - MPP29_GPIO, /* LED: Red USB (DNS-325 only) */ - MPP30_GPIO, - MPP31_GPIO, - MPP32_GPIO, - MPP33_GPO, - MPP34_GPIO, /* Button: Front power */ - MPP35_GPIO, /* LED: Red USB (DNS-320 only) */ - MPP36_GPIO, /* Power: Turn off board */ - MPP37_GPIO, /* Power: Turn back on after power failure */ - MPP38_GPIO, - MPP39_GPIO, /* Power: SATA0 */ - MPP40_GPIO, /* Power: SATA1 */ - MPP41_GPIO, /* SATA0 present */ - MPP42_GPIO, /* SATA1 present */ - MPP43_GPIO, /* LED: White USB */ - MPP44_GPIO, /* Fan: Tachometer Pin */ - MPP45_GPIO, /* Fan: high speed */ - MPP46_GPIO, /* Fan: low speed */ - MPP47_GPIO, /* Button: Back unmount */ - MPP48_GPIO, /* Button: Back reset */ - MPP49_GPIO, /* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */ - 0 -}; - -static void dnskw_power_off(void) -{ - gpio_set_value(36, 1); -} - /* Register any GPIO for output and set the value */ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def) { @@ -76,22 +36,8 @@ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def) void __init dnskw_init(void) { - kirkwood_mpp_conf(dnskw_mpp_config); - - kirkwood_ehci_init(); kirkwood_ge00_init(&dnskw_ge00_data); - /* Register power-off GPIO. */ - if (gpio_request(36, "dnskw:power:off") == 0 - && gpio_direction_output(36, 0) == 0) - pm_power_off = dnskw_power_off; - else - pr_err("dnskw: failed to configure power-off GPIO\n"); - - /* Ensure power is supplied to both HDDs */ - dnskw_gpio_register(39, "dnskw:power:sata0", 1); - dnskw_gpio_register(40, "dnskw:power:sata1", 1); - /* Set NAS to turn back on after a power failure */ dnskw_gpio_register(37, "dnskw:power:recover", 1); } diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c index f2fbb023e679..d7196db33984 100644 --- a/arch/arm/mach-kirkwood/board-dockstar.c +++ b/arch/arm/mach-kirkwood/board-dockstar.c @@ -16,46 +16,17 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/kirkwood.h> -#include <mach/bridge-regs.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data dockstar_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; -static unsigned int dockstar_mpp_config[] __initdata = { - MPP29_GPIO, /* USB Power Enable */ - MPP46_GPIO, /* LED green */ - MPP47_GPIO, /* LED orange */ - 0 -}; - void __init dockstar_dt_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(dockstar_mpp_config); - - if (gpio_request(29, "USB Power Enable") != 0 || - gpio_direction_output(29, 1) != 0) - pr_err("can't setup GPIO 29 (USB Power Enable)\n"); - kirkwood_ehci_init(); - kirkwood_ge00_init(&dockstar_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c index 20af53a56c0e..08248e24ffcd 100644 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -13,26 +13,10 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/gpio.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/kirkwood.h> -#include <mach/bridge-regs.h> #include <linux/platform_data/mmc-mvsdio.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data dreamplug_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), @@ -46,25 +30,11 @@ static struct mvsdio_platform_data dreamplug_mvsdio_data = { /* unfortunately the CD signal has not been connected */ }; -static unsigned int dreamplug_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP47_GPIO, /* Bluetooth LED */ - MPP48_GPIO, /* Wifi LED */ - MPP49_GPIO, /* Wifi AP LED */ - 0 -}; - void __init dreamplug_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(dreamplug_mpp_config); - - kirkwood_ehci_init(); kirkwood_ge00_init(&dreamplug_ge00_data); kirkwood_ge01_init(&dreamplug_ge01_data); kirkwood_sdio_init(&dreamplug_mvsdio_data); diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index d94872fed8c0..375f7d88551c 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -26,10 +26,12 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = { { } }; -struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { +static struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011100, "mv64xxx_i2c.1", + NULL), OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL), @@ -94,11 +96,30 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("keymile,km_kirkwood")) km_kirkwood_init(); + if (of_machine_is_compatible("lacie,inetspace_v2") || + of_machine_is_compatible("lacie,netspace_v2") || + of_machine_is_compatible("lacie,netspace_max_v2") || + of_machine_is_compatible("lacie,netspace_lite_v2") || + of_machine_is_compatible("lacie,netspace_mini_v2")) + ns2_init(); + + if (of_machine_is_compatible("mpl,cec4")) + mplcec4_init(); + + if (of_machine_is_compatible("plathome,openblocks-a6")) + openblocks_a6_init(); + + if (of_machine_is_compatible("usi,topkick")) + usi_topkick_init(); + + if (of_machine_is_compatible("zyxel,nsa310")) + nsa310_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } -static const char *kirkwood_dt_board_compat[] = { +static const char * const kirkwood_dt_board_compat[] = { "globalscale,dreamplug", "dlink,dns-320", "dlink,dns-325", @@ -110,6 +131,15 @@ static const char *kirkwood_dt_board_compat[] = { "buffalo,lsxl", "iom,ix2-200", "keymile,km_kirkwood", + "lacie,inetspace_v2", + "lacie,netspace_max_v2", + "lacie,netspace_v2", + "lacie,netspace_lite_v2", + "lacie,netspace_mini_v2", + "mpl,cec4", + "plathome,openblocks-a6", + "usi,topkick", + "zyxel,nsa310", NULL }; diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c index 001ca8c96980..9db979aec82e 100644 --- a/arch/arm/mach-kirkwood/board-goflexnet.c +++ b/arch/arm/mach-kirkwood/board-goflexnet.c @@ -18,54 +18,17 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/kirkwood.h> -#include <mach/bridge-regs.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data goflexnet_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; -static unsigned int goflexnet_mpp_config[] __initdata = { - MPP29_GPIO, /* USB Power Enable */ - MPP47_GPIO, /* LED Orange */ - MPP46_GPIO, /* LED Green */ - MPP45_GPIO, /* LED Left Capacity 3 */ - MPP44_GPIO, /* LED Left Capacity 2 */ - MPP43_GPIO, /* LED Left Capacity 1 */ - MPP42_GPIO, /* LED Left Capacity 0 */ - MPP41_GPIO, /* LED Right Capacity 3 */ - MPP40_GPIO, /* LED Right Capacity 2 */ - MPP39_GPIO, /* LED Right Capacity 1 */ - MPP38_GPIO, /* LED Right Capacity 0 */ - 0 -}; - void __init goflexnet_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(goflexnet_mpp_config); - - if (gpio_request(29, "USB Power Enable") != 0 || - gpio_direction_output(29, 1) != 0) - pr_err("can't setup GPIO 29 (USB Power Enable)\n"); - kirkwood_ehci_init(); - kirkwood_ge00_init(&goflexnet_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c index cfc47f80e734..9f6f496380d8 100644 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -13,59 +13,18 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/gpio.h> #include <linux/input.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> #include "common.h" -#include "mpp.h" - -#define IB62X0_GPIO_POWER_OFF 24 static struct mv643xx_eth_platform_data ib62x0_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int ib62x0_mpp_config[] __initdata = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP22_GPIO, /* OS LED red */ - MPP24_GPIO, /* Power off device */ - MPP25_GPIO, /* OS LED green */ - MPP27_GPIO, /* USB transfer LED */ - MPP28_GPIO, /* Reset button */ - MPP29_GPIO, /* USB Copy button */ - 0 -}; - -static void ib62x0_power_off(void) -{ - gpio_set_value(IB62X0_GPIO_POWER_OFF, 1); -} - void __init ib62x0_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(ib62x0_mpp_config); - - kirkwood_ehci_init(); kirkwood_ge00_init(&ib62x0_ge00_data); - if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 && - gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0) - pm_power_off = ib62x0_power_off; - else - pr_err("board-ib62x0: failed to configure power-off GPIO\n"); } diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index d084b1e2943a..c8ebde4919e2 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -10,42 +10,16 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> #include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_fdt.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data iconnect_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(11), }; -static unsigned int iconnect_mpp_config[] __initdata = { - MPP12_GPIO, - MPP35_GPIO, - MPP41_GPIO, - MPP42_GPIO, - MPP43_GPIO, - MPP44_GPIO, - MPP45_GPIO, - MPP46_GPIO, - MPP47_GPIO, - MPP48_GPIO, - 0 -}; - void __init iconnect_init(void) { - kirkwood_mpp_conf(iconnect_mpp_config); - - kirkwood_ehci_init(); kirkwood_ge00_init(&iconnect_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c index 158fb97d0397..f655b2637b0e 100644 --- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c +++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c @@ -10,12 +10,9 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/platform_device.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> -#include <mach/kirkwood.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { .phy_addr = MV643XX_ETH_PHY_NONE, @@ -23,35 +20,10 @@ static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { .duplex = DUPLEX_FULL, }; -static unsigned int iomega_ix2_200_mpp_config[] __initdata = { - MPP12_GPIO, /* Reset Button */ - MPP14_GPIO, /* Power Button */ - MPP15_GPIO, /* Backup LED (blue) */ - MPP16_GPIO, /* Power LED (white) */ - MPP35_GPIO, /* OTB Button */ - MPP36_GPIO, /* Rebuild LED (white) */ - MPP37_GPIO, /* Health LED (red) */ - MPP38_GPIO, /* SATA LED brightness control 1 */ - MPP39_GPIO, /* SATA LED brightness control 2 */ - MPP40_GPIO, /* Backup LED brightness control 1 */ - MPP41_GPIO, /* Backup LED brightness control 2 */ - MPP42_GPIO, /* Power LED brightness control 1 */ - MPP43_GPIO, /* Power LED brightness control 2 */ - MPP44_GPIO, /* Health LED brightness control 1 */ - MPP45_GPIO, /* Health LED brightness control 2 */ - MPP46_GPIO, /* Rebuild LED brightness control 1 */ - MPP47_GPIO, /* Rebuild LED brightness control 2 */ - 0 -}; - void __init iomega_ix2_200_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(iomega_ix2_200_mpp_config); - - kirkwood_ehci_init(); - kirkwood_ge01_init(&iomega_ix2_200_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c index f7d32834b757..44e4605ba0bf 100644 --- a/arch/arm/mach-kirkwood/board-km_kirkwood.c +++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c @@ -18,27 +18,15 @@ #include <linux/clk.h> #include <linux/clk-private.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; -static unsigned int km_kirkwood_mpp_config[] __initdata = { - MPP8_GPIO, /* I2C SDA */ - MPP9_GPIO, /* I2C SCL */ - 0 -}; - void __init km_kirkwood_init(void) { struct clk *sata_clk; /* - * Basic setup. Needs to be called early. - */ - kirkwood_mpp_conf(km_kirkwood_mpp_config); - - /* * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing * SATA bits (14-15) of the Clock Gating Control Register. Since these * devices are also not present in this variant, their clocks get @@ -52,6 +40,5 @@ void __init km_kirkwood_init(void) if (!IS_ERR(sata_clk)) sata_clk->flags |= CLK_IGNORE_UNUSED; - kirkwood_ehci_init(); kirkwood_ge00_init(&km_kirkwood_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c index 83d8975592f8..4ec8b7ae784a 100644 --- a/arch/arm/mach-kirkwood/board-lsxl.c +++ b/arch/arm/mach-kirkwood/board-lsxl.c @@ -14,19 +14,8 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/ata_platform.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> #include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include <linux/gpio-fan.h> -#include <linux/input.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data lsxl_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), @@ -36,68 +25,6 @@ static struct mv643xx_eth_platform_data lsxl_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int lsxl_mpp_config[] __initdata = { - MPP10_GPO, /* HDD Power Enable */ - MPP11_GPIO, /* USB Vbus Enable */ - MPP18_GPO, /* FAN High Enable# */ - MPP19_GPO, /* FAN Low Enable# */ - MPP36_GPIO, /* Function Blue LED */ - MPP37_GPIO, /* Alarm LED */ - MPP38_GPIO, /* Info LED */ - MPP39_GPIO, /* Power LED */ - MPP40_GPIO, /* Fan Lock */ - MPP41_GPIO, /* Function Button */ - MPP42_GPIO, /* Power Switch */ - MPP43_GPIO, /* Power Auto Switch */ - MPP48_GPIO, /* Function Red LED */ - 0 -}; - -#define LSXL_GPIO_FAN_HIGH 18 -#define LSXL_GPIO_FAN_LOW 19 -#define LSXL_GPIO_FAN_LOCK 40 - -static struct gpio_fan_alarm lsxl_alarm = { - .gpio = LSXL_GPIO_FAN_LOCK, -}; - -static struct gpio_fan_speed lsxl_speeds[] = { - { - .rpm = 0, - .ctrl_val = 3, - }, { - .rpm = 1500, - .ctrl_val = 1, - }, { - .rpm = 3250, - .ctrl_val = 2, - }, { - .rpm = 5000, - .ctrl_val = 0, - } -}; - -static int lsxl_gpio_list[] = { - LSXL_GPIO_FAN_HIGH, LSXL_GPIO_FAN_LOW, -}; - -static struct gpio_fan_platform_data lsxl_fan_data = { - .num_ctrl = ARRAY_SIZE(lsxl_gpio_list), - .ctrl = lsxl_gpio_list, - .alarm = &lsxl_alarm, - .num_speed = ARRAY_SIZE(lsxl_speeds), - .speed = lsxl_speeds, -}; - -static struct platform_device lsxl_fan_device = { - .name = "gpio-fan", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &lsxl_fan_data, - }, -}; - /* * On the LS-XHL/LS-CHLv2, the shutdown process is following: * - Userland monitors key events until the power switch goes to off position @@ -111,24 +38,14 @@ static void lsxl_power_off(void) kirkwood_restart('h', NULL); } -#define LSXL_GPIO_HDD_POWER 10 -#define LSXL_GPIO_USB_POWER 11 - void __init lsxl_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(lsxl_mpp_config); - - /* usb and sata power on */ - gpio_set_value(LSXL_GPIO_USB_POWER, 1); - gpio_set_value(LSXL_GPIO_HDD_POWER, 1); - kirkwood_ehci_init(); kirkwood_ge00_init(&lsxl_ge00_data); kirkwood_ge01_init(&lsxl_ge01_data); - platform_device_register(&lsxl_fan_device); /* register power-off method */ pm_power_off = lsxl_power_off; diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c new file mode 100644 index 000000000000..56bfe5a1605a --- /dev/null +++ b/arch/arm/mach-kirkwood/board-mplcec4.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 MPL AG, Switzerland + * Stefan Peter <s.peter@mpl.ch> + * + * arch/arm/mach-kirkwood/board-mplcec4.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/platform_data/mmc-mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data mplcec4_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv643xx_eth_platform_data mplcec4_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(2), +}; + +static struct mvsdio_platform_data mplcec4_mvsdio_data = { + .gpio_card_detect = 47, /* MPP47 used as SD card detect */ +}; + + +void __init mplcec4_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_ge00_init(&mplcec4_ge00_data); + kirkwood_ge01_init(&mplcec4_ge01_data); + kirkwood_sdio_init(&mplcec4_mvsdio_data); + kirkwood_pcie_init(KW_PCIE0); +} + + + diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c new file mode 100644 index 000000000000..8821720ab5a4 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-ns2.c @@ -0,0 +1,86 @@ +/* + * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org> + * + * arch/arm/mach-kirkwood/board-ns2.c + * + * LaCie Network Space v2 board (and parents) initialization for drivers + * not converted to flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data ns2_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static unsigned int ns2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Fan speed (bit 1) */ + MPP8_TW0_SDA, + MPP9_TW0_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* Red led */ + MPP14_GPIO, /* USB fuse */ + MPP16_GPIO, /* SATA 0 power */ + MPP17_GPIO, /* SATA 1 power */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP22_GPIO, /* Fan speed (bit 0) */ + MPP23_GPIO, /* Fan power */ + MPP24_GPIO, /* USB mode select */ + MPP25_GPIO, /* Fan rotation fail */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* Blue led (slow register) */ + MPP30_GPIO, /* Blue led (command register) */ + MPP31_GPIO, /* Board power off */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + MPP33_GPO, /* Fan speed (bit 2) */ + 0 +}; + +#define NS2_GPIO_POWER_OFF 31 + +static void ns2_power_off(void) +{ + gpio_set_value(NS2_GPIO_POWER_OFF, 1); +} + +void __init ns2_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(ns2_mpp_config); + + if (of_machine_is_compatible("lacie,netspace_lite_v2") || + of_machine_is_compatible("lacie,netspace_mini_v2")) + ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); + kirkwood_ge00_init(&ns2_ge00_data); + + if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0) + pm_power_off = ns2_power_off; + else + pr_err("ns2: failed to configure power-off GPIO\n"); +} diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c new file mode 100644 index 000000000000..f58d2e1a4042 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-nsa310.c @@ -0,0 +1,101 @@ +/* + * arch/arm/mach-kirkwood/nsa-310-setup.c + * + * ZyXEL NSA-310 Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +#define NSA310_GPIO_USB_POWER_OFF 21 +#define NSA310_GPIO_POWER_OFF 48 + +static unsigned int nsa310_mpp_config[] __initdata = { + MPP12_GPIO, /* led esata green */ + MPP13_GPIO, /* led esata red */ + MPP15_GPIO, /* led usb green */ + MPP16_GPIO, /* led usb red */ + MPP21_GPIO, /* control usb power off */ + MPP28_GPIO, /* led sys green */ + MPP29_GPIO, /* led sys red */ + MPP36_GPIO, /* key reset */ + MPP37_GPIO, /* key copy */ + MPP39_GPIO, /* led copy green */ + MPP40_GPIO, /* led copy red */ + MPP41_GPIO, /* led hdd green */ + MPP42_GPIO, /* led hdd red */ + MPP44_GPIO, /* ?? */ + MPP46_GPIO, /* key power */ + MPP48_GPIO, /* control power off */ + 0 +}; + +static struct i2c_board_info __initdata nsa310_i2c_info[] = { + { I2C_BOARD_INFO("adt7476", 0x2e) }, +}; + +static void nsa310_power_off(void) +{ + gpio_set_value(NSA310_GPIO_POWER_OFF, 1); +} + +static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags, + const char *label) +{ + int err; + + err = gpio_request_one(gpio, flags, label); + if (err) + pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n", + gpio, label, err); + + return err; +} + +static void __init nsa310_gpio_init(void) +{ + int err; + + err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW, + "Power Off"); + if (!err) + pm_power_off = nsa310_power_off; + + nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW, + "USB Power Off"); +} + +void __init nsa310_init(void) +{ + u32 dev, rev; + + kirkwood_mpp_conf(nsa310_mpp_config); + + nsa310_gpio_init(); + + kirkwood_pcie_id(&dev, &rev); + + i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info)); +} + +static int __init nsa310_pci_init(void) +{ + if (of_machine_is_compatible("zyxel,nsa310")) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} + +subsys_initcall(nsa310_pci_init); diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c new file mode 100644 index 000000000000..815fc6451d52 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c @@ -0,0 +1,70 @@ +/* + * Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * arch/arm/mach-kirkwood/board-openblocks_a6.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/clk.h> +#include <linux/clk-private.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data openblocks_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int openblocks_a6_mpp_config[] __initdata = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP8_UART1_RTS, + MPP9_UART1_CTS, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_UART1_TXD, + MPP14_UART1_RXD, + MPP15_UART0_RTS, + MPP16_UART0_CTS, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GPIO, /* DIP SW0 */ + MPP21_GPIO, /* DIP SW1 */ + MPP22_GPIO, /* DIP SW2 */ + MPP23_GPIO, /* DIP SW3 */ + MPP24_GPIO, /* GPIO 0 */ + MPP25_GPIO, /* GPIO 1 */ + MPP26_GPIO, /* GPIO 2 */ + MPP27_GPIO, /* GPIO 3 */ + MPP28_GPIO, /* GPIO 4 */ + MPP29_GPIO, /* GPIO 5 */ + MPP30_GPIO, /* GPIO 6 */ + MPP31_GPIO, /* GPIO 7 */ + MPP36_TW1_SDA, + MPP37_TW1_SCK, + MPP38_GPIO, /* INIT */ + MPP39_GPIO, /* USB OC */ + MPP41_GPIO, /* LED: Red */ + MPP42_GPIO, /* LED: Green */ + MPP43_GPIO, /* LED: Yellow */ + 0, +}; + +void __init openblocks_a6_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(openblocks_a6_mpp_config); + kirkwood_ge00_init(&openblocks_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index 1750e68506c1..acb0187c7ee1 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -19,54 +19,25 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/mv643xx_eth.h> -#include <linux/ata_platform.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include "common.h" -#include "mpp.h" #include "tsx1x-common.h" static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int qnap_ts219_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_SATA1_ACTn, - MPP5_SATA0_ACTn, - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP13_UART1_TXD, /* PIC controller */ - MPP14_UART1_RXD, /* PIC controller */ - MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */ - MPP16_GPIO, /* Reset button (on devices with 88F6281) */ - MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ - MPP37_GPIO, /* Reset button (on devices with 88F6282) */ - MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */ - MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */ - 0 -}; - void __init qnap_dt_ts219_init(void) { u32 dev, rev; - kirkwood_mpp_conf(qnap_ts219_mpp_config); - kirkwood_pcie_id(&dev, &rev); if (dev == MV88F6282_DEV_ID) qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); kirkwood_ge00_init(&qnap_ts219_ge00_data); - kirkwood_ehci_init(); pm_power_off = qnap_tsx1x_power_off; } diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c new file mode 100644 index 000000000000..15e69fcde9f4 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-usi_topkick.c @@ -0,0 +1,81 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-kirkwood/board-usi_topkick.c + * + * USI Topkick Init for drivers not converted to flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/platform_data/mmc-mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data topkick_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mvsdio_platform_data topkick_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +/* + * GPIO LED layout + * + * /-SYS_LED(2) + * | + * | /-DISK_LED + * | | + * | | /-WLAN_LED(2) + * | | | + * [SW] [*] [*] [*] + */ + +/* + * Switch positions + * + * /-SW_LEFT + * | + * | /-SW_IDLE + * | | + * | | /-SW_RIGHT + * | | | + * PS [L] [I] [R] LEDS + */ + +static unsigned int topkick_mpp_config[] __initdata = { + MPP21_GPIO, /* DISK_LED (low active) - yellow */ + MPP36_GPIO, /* SATA0 power enable (high active) */ + MPP37_GPIO, /* SYS_LED2 (low active) - red */ + MPP38_GPIO, /* SYS_LED (low active) - blue */ + MPP39_GPIO, /* WLAN_LED (low active) - green */ + MPP43_GPIO, /* SW_LEFT (low active) */ + MPP44_GPIO, /* SW_RIGHT (low active) */ + MPP45_GPIO, /* SW_IDLE (low active) */ + MPP46_GPIO, /* SW_LEFT (low active) */ + MPP48_GPIO, /* WLAN_LED2 (low active) - yellow */ + 0 +}; + +#define TOPKICK_SATA0_PWR_ENABLE 36 + +void __init usi_topkick_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(topkick_mpp_config); + + /* SATA0 power enable */ + gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1); + + kirkwood_ge00_init(&topkick_ge00_data); + kirkwood_sdio_init(&topkick_mvsdio_data); +} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 2c6c218fb79e..5303be62b311 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -18,10 +18,10 @@ #include <linux/clk-provider.h> #include <linux/spinlock.h> #include <linux/mv643xx_i2c.h> +#include <linux/timex.h> +#include <linux/kexec.h> #include <net/dsa.h> #include <asm/page.h> -#include <asm/timex.h> -#include <asm/kexec.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <mach/kirkwood.h> @@ -266,6 +266,7 @@ void __init kirkwood_clk_init(void) orion_clkdev_add("1", "pcie", pex1); orion_clkdev_add(NULL, "kirkwood-i2s", audio); orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit); + orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit); /* Marvell says runit is used by SPI, UART, NAND, TWSI, ..., * so should never be gated. @@ -425,7 +426,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data) /***************************************************************************** * SPI ****************************************************************************/ -void __init kirkwood_spi_init() +void __init kirkwood_spi_init(void) { orion_spi_init(SPI_PHYS_BASE); } @@ -646,8 +647,7 @@ void __init kirkwood_l2_init(void) void __init kirkwood_init(void) { - printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n", - kirkwood_id(), kirkwood_tclk); + pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk); /* * Disable propagation of mbus errors to the CPU local bus, @@ -671,7 +671,7 @@ void __init kirkwood_init(void) kirkwood_xor1_init(); kirkwood_crypto_init(); -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC kexec_reinit = kirkwood_enable_pcie; #endif } diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index bcffd7ca1ca2..5ffa57f08c80 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -47,7 +47,8 @@ void kirkwood_i2c_init(void); void kirkwood_uart0_init(void); void kirkwood_uart1_init(void); void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay); -void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *)); +void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, + int (*dev_ready)(struct mtd_info *)); void kirkwood_audio_init(void); void kirkwood_restart(char, const char *); void kirkwood_clk_init(void); @@ -112,6 +113,40 @@ void km_kirkwood_init(void); static inline void km_kirkwood_init(void) {}; #endif +#ifdef CONFIG_MACH_MPLCEC4_DT +void mplcec4_init(void); +#else +static inline void mplcec4_init(void) {}; +#endif + +#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_MINI_V2_DT) +void ns2_init(void); +#else +static inline void ns2_init(void) {}; +#endif + +#ifdef CONFIG_MACH_NSA310_DT +void nsa310_init(void); +#else +static inline void nsa310_init(void) {}; +#endif + +#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT +void openblocks_a6_init(void); +#else +static inline void openblocks_a6_init(void) {}; +#endif + +#ifdef CONFIG_MACH_TOPKICK_DT +void usi_topkick_init(void); +#else +static inline void usi_topkick_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c index 0f1710941878..f7304670f2f8 100644 --- a/arch/arm/mach-kirkwood/cpuidle.c +++ b/arch/arm/mach-kirkwood/cpuidle.c @@ -64,7 +64,7 @@ static int kirkwood_init_cpuidle(void) cpuidle_register_driver(&kirkwood_idle_driver); if (cpuidle_register_device(device)) { - printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n"); + pr_err("kirkwood_init_cpuidle: Failed registering\n"); return -EIO; } return 0; diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c index 23dcb19cc2a7..791a98fafa29 100644 --- a/arch/arm/mach-kirkwood/dockstar-setup.c +++ b/arch/arm/mach-kirkwood/dockstar-setup.c @@ -93,7 +93,7 @@ static void __init dockstar_init(void) if (gpio_request(29, "USB Power Enable") != 0 || gpio_direction_output(29, 1) != 0) - printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + pr_err("can't set up GPIO 29 (USB Power Enable)\n"); kirkwood_ehci_init(); kirkwood_ge00_init(&dockstar_ge00_data); diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 884703535a0a..2a97a2e4163c 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -14,6 +14,7 @@ #include <mach/bridge-regs.h> #include <plat/orion-gpio.h> #include <plat/irq.h> +#include "common.h" static int __initdata gpio0_irqs[4] = { IRQ_KIRKWOOD_GPIO_LOW_0_7, diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c index 285edab776e9..489495976fcd 100644 --- a/arch/arm/mach-kirkwood/lacie_v2-common.c +++ b/arch/arm/mach-kirkwood/lacie_v2-common.c @@ -19,6 +19,7 @@ #include <mach/irqs.h> #include <plat/time.h> #include "common.h" +#include "lacie_v2-common.h" /***************************************************************************** * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005) diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 0c6ad63f10c7..827cde42414f 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -30,8 +30,8 @@ static unsigned int __init kirkwood_variant(void) if (dev == MV88F6180_DEV_ID) return MPP_F6180_MASK; - printk(KERN_ERR "MPP setup: unknown kirkwood variant " - "(dev %#x rev %#x)\n", dev, rev); + pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n", + dev, rev); return 0; } diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c index 88b0788bacae..728e86d33f0c 100644 --- a/arch/arm/mach-kirkwood/netspace_v2-setup.c +++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c @@ -79,7 +79,7 @@ static struct platform_device netspace_v2_gpio_buttons = { .name = "gpio-keys", .id = -1, .dev = { - .platform_data = &netspace_v2_button_data, + .platform_data = &netspace_v2_button_data, }, }; @@ -211,7 +211,7 @@ static unsigned int netspace_v2_mpp_config[] __initdata = { MPP29_GPIO, /* Blue led (slow register) */ MPP30_GPIO, /* Blue led (command register) */ MPP31_GPIO, /* Board power off */ - MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ MPP33_GPO, /* Fan speed (bit 2) */ 0 }; diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index 134ef50d58fc..7e81e9b586bf 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -121,14 +121,12 @@ static int __init uart1_mpp_config(void) kirkwood_mpp_conf(openrd_uart1_mpp_config); if (gpio_request(34, "SD_UART1_SEL")) { - printk(KERN_ERR "GPIO request failed for SD/UART1 selection" - ", gpio: 34\n"); + pr_err("GPIO request 34 failed for SD/UART1 selection\n"); return -EIO; } if (gpio_request(28, "RS232_RS485_SEL")) { - printk(KERN_ERR "GPIO request failed for RS232/RS485 selection" - ", gpio# 28\n"); + pr_err("GPIO request 28 failed for RS232/RS485 selection\n"); gpio_free(34); return -EIO; } @@ -185,15 +183,13 @@ static void __init openrd_init(void) if (uart1 <= 0) { if (uart1 < 0) - printk(KERN_ERR "Invalid kernel parameter to select " - "UART1. Defaulting to SD. ERROR CODE: %d\n", - uart1); + pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n", + uart1); /* Select SD * Pin # 34: 0 => UART1, 1 => SD */ if (gpio_request(34, "SD_UART1_SEL")) { - printk(KERN_ERR "GPIO request failed for SD/UART1 " - "selection, gpio: 34\n"); + pr_err("GPIO request 34 failed for SD/UART1 selection\n"); } else { gpio_direction_output(34, 1); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index ec544918b12c..1e9f90ee0f5c 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -26,7 +26,7 @@ static void kirkwood_enable_pcie_clk(const char *port) clk = clk_get_sys("pcie", port); if (IS_ERR(clk)) { - printk(KERN_ERR "PCIE clock %s missing\n", port); + pr_err("PCIE clock %s missing\n", port); return; } clk_prepare_enable(clk); @@ -168,7 +168,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) return 0; index = pcie_port_map[nr]; - printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index); + pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index); pp = kzalloc(sizeof(*pp), GFP_KERNEL); if (!pp) @@ -186,7 +186,8 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) case 1: kirkwood_enable_pcie_clk("1"); pcie1_ioresources_init(pp); - pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE); + pci_ioremap_io(SZ_64K * sys->busnr, + KIRKWOOD_PCIE1_IO_PHYS_BASE); break; default: panic("PCIe setup: invalid controller %d", index); @@ -224,22 +225,6 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); -static struct pci_bus __init * -kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys) -{ - struct pci_bus *bus; - - if (nr < num_pcie_ports) { - bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys, - &sys->resources); - } else { - bus = NULL; - BUG(); - } - - return bus; -} - static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { @@ -251,19 +236,19 @@ static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot, static struct hw_pci kirkwood_pci __initdata = { .setup = kirkwood_pcie_setup, - .scan = kirkwood_pcie_scan_bus, .map_irq = kirkwood_pcie_map_irq, + .ops = &pcie_ops, }; static void __init add_pcie_port(int index, void __iomem *base) { - printk(KERN_INFO "Kirkwood PCIe port %d: ", index); + pr_info("Kirkwood PCIe port %d: ", index); if (orion_pcie_link_up(base)) { - printk(KERN_INFO "link up\n"); + pr_info("link up\n"); pcie_port_map[num_pcie_ports++] = index; } else - printk(KERN_INFO "link down, ignoring\n"); + pr_info("link down, ignoring\n"); } void __init kirkwood_pcie_init(unsigned int portmask) diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c index 28d0abaf4bd9..8a175948b28d 100644 --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c @@ -117,7 +117,7 @@ static void __init sheevaplug_init(void) if (gpio_request(29, "USB Power Enable") != 0 || gpio_direction_output(29, 1) != 0) - printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + pr_err("can't set up GPIO 29 (USB Power Enable)\n"); kirkwood_ehci_init(); kirkwood_ge00_init(&sheevaplug_ge00_data); diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index bad738e44044..f2daf711e72e 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -29,7 +29,7 @@ #include "common.h" #include "mpp.h" -struct mtd_partition hp_t5325_partitions[] = { +static struct mtd_partition hp_t5325_partitions[] = { { .name = "u-boot env", .size = SZ_64K, @@ -59,14 +59,14 @@ struct mtd_partition hp_t5325_partitions[] = { }, }; -const struct flash_platform_data hp_t5325_flash = { +static const struct flash_platform_data hp_t5325_flash = { .type = "mx25l8005", .name = "spi_flash", .parts = hp_t5325_partitions, .nr_parts = ARRAY_SIZE(hp_t5325_partitions), }; -struct spi_board_info __initdata hp_t5325_spi_slave_info[] = { +static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = { { .modalias = "m25p80", .platform_data = &hp_t5325_flash, diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index 367a9400f532..e4c61279ea86 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -170,8 +170,7 @@ static int __init ts41x_pci_init(void) else kirkwood_pcie_init(KW_PCIE0); } - - return 0; + return 0; } subsys_initcall(ts41x_pci_init); diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c index 8943ede29b44..cec87cef76ca 100644 --- a/arch/arm/mach-kirkwood/tsx1x-common.c +++ b/arch/arm/mach-kirkwood/tsx1x-common.c @@ -7,6 +7,7 @@ #include <linux/serial_reg.h> #include <mach/kirkwood.h> #include "common.h" +#include "tsx1x-common.h" /* * QNAP TS-x1x Boards flash @@ -29,7 +30,7 @@ * ***************************************************************************/ -struct mtd_partition qnap_tsx1x_partitions[] = { +static struct mtd_partition qnap_tsx1x_partitions[] = { { .name = "U-Boot", .size = 0x00080000, @@ -58,14 +59,14 @@ struct mtd_partition qnap_tsx1x_partitions[] = { }, }; -const struct flash_platform_data qnap_tsx1x_flash = { +static const struct flash_platform_data qnap_tsx1x_flash = { .type = "m25p128", .name = "spi_flash", .parts = qnap_tsx1x_partitions, .nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions), }; -struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = { +static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = { { .modalias = "m25p80", .platform_data = &qnap_tsx1x_flash, diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 4748ec551a68..98070370d602 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -100,6 +100,25 @@ static struct fb_videomode apx4devkit_video_modes[] = { }, }; +static struct fb_videomode apf28dev_video_modes[] = { + { + .name = "LW700", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 30303, /* picosecond */ + .left_margin = 96, + .right_margin = 96, /* at least 3 & 1 */ + .upper_margin = 0x14, + .lower_margin = 0x15, + .hsync_len = 64, + .vsync_len = 4, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT | + FB_SYNC_DATA_ENABLE_HIGH_ACT | + FB_SYNC_DOTCLK_FAILING_ACT, + }, +}; + static struct mxsfb_platform_data mxsfb_pdata __initdata; /* @@ -160,6 +179,7 @@ static struct sys_timer imx28_timer = { enum mac_oui { OUI_FSL, OUI_DENX, + OUI_CRYSTALFONTZ, }; static void __init update_fec_mac_prop(enum mac_oui oui) @@ -175,8 +195,12 @@ static void __init update_fec_mac_prop(enum mac_oui oui) np = of_find_compatible_node(from, NULL, "fsl,imx28-fec"); if (!np) return; + from = np; + if (of_get_property(np, "local-mac-address", NULL)) + continue; + newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL); if (!newmac) return; @@ -205,6 +229,11 @@ static void __init update_fec_mac_prop(enum mac_oui oui) macaddr[1] = 0xe5; macaddr[2] = 0x4e; break; + case OUI_CRYSTALFONTZ: + macaddr[0] = 0x58; + macaddr[1] = 0xb9; + macaddr[2] = 0xe1; + break; } val = ocotp[i]; macaddr[3] = (val >> 16) & 0xff; @@ -261,6 +290,11 @@ static void __init m28evk_init(void) mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; } +static void __init sc_sps1_init(void) +{ + enable_clk_enet_out(); +} + static int apx4devkit_phy_fixup(struct phy_device *phy) { phy->dev_flags |= MICREL_PHY_50MHZ_CLK; @@ -355,6 +389,22 @@ static void __init tx28_post_init(void) pinctrl_put(pctl); } +static void __init cfa10049_init(void) +{ + enable_clk_enet_out(); + update_fec_mac_prop(OUI_CRYSTALFONTZ); +} + +static void __init apf28_init(void) +{ + enable_clk_enet_out(); + + mxsfb_pdata.mode_list = apf28dev_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes); + mxsfb_pdata.default_bpp = 16; + mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT; +} + static void __init mxs_machine_init(void) { if (of_machine_is_compatible("fsl,imx28-evk")) @@ -365,6 +415,12 @@ static void __init mxs_machine_init(void) m28evk_init(); else if (of_machine_is_compatible("bluegiga,apx4devkit")) apx4devkit_init(); + else if (of_machine_is_compatible("crystalfontz,cfa10049")) + cfa10049_init(); + else if (of_machine_is_compatible("armadeus,imx28-apf28")) + apf28_init(); + else if (of_machine_is_compatible("schulercontrol,imx28-sps1")) + sc_sps1_init(); of_platform_populate(NULL, of_default_bus_match_table, mxs_auxdata_lookup, NULL); diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c index 7c3792613392..856f4c796061 100644 --- a/arch/arm/mach-mxs/timer.c +++ b/arch/arm/mach-mxs/timer.c @@ -29,6 +29,7 @@ #include <linux/of_irq.h> #include <asm/mach/time.h> +#include <asm/sched_clock.h> #include <mach/mxs.h> #include <mach/common.h> @@ -233,15 +234,22 @@ static struct clocksource clocksource_mxs = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static u32 notrace mxs_read_sched_clock_v2(void) +{ + return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1)); +} + static int __init mxs_clocksource_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); if (timrot_is_v1()) clocksource_register_hz(&clocksource_mxs, c); - else + else { clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1), "mxs_timer", c, 200, 32, clocksource_mmio_readl_down); + setup_sched_clock(mxs_read_sched_clock_v2, 32, c); + } return 0; } diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index cd169c386161..f0e69cbc5baa 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,8 @@ # # Common support -obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o +obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \ + serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 8b5800acf726..e067f221f0f9 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -30,13 +30,13 @@ #include <mach/tc.h> #include <mach/mux.h> #include <mach/flash.h> -#include <../plat-omap/fpga.h> #include <linux/platform_data/keypad-omap.h> #include <mach/hardware.h> #include "iomap.h" #include "common.h" +#include "fpga.h" /* fsample is pretty close to p2-sample */ diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 9134b646f01b..dcf364d1a8b1 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -39,7 +39,7 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <mach/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index bf213d1d8075..b3fcdedb44ca 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -43,7 +43,7 @@ #include <mach/mux.h> #include <mach/tc.h> #include <linux/platform_data/keypad-omap.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <mach/flash.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index c66334f22471..f8033fab0f82 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -33,7 +33,6 @@ #include <mach/mux.h> #include <mach/flash.h> -#include <../plat-omap/fpga.h> #include <mach/tc.h> #include <linux/platform_data/keypad-omap.h> diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 584b6fab894b..c33dceb46607 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -37,7 +37,7 @@ #include <mach/flash.h> #include <mach/mux.h> #include <mach/tc.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index fbc986bfe69e..2948b0ee4be8 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -36,7 +36,7 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <mach/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 60d917a93763..7a05895c0be3 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -38,7 +38,7 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <mach/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 030bd48727be..9a7e483ed6fd 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -30,13 +30,13 @@ #include <mach/tc.h> #include <mach/mux.h> -#include <../plat-omap/fpga.h> #include <mach/flash.h> #include <mach/hardware.h> #include "iomap.h" #include "common.h" +#include "fpga.h" static const unsigned int p2_keymap[] = { KEY(0, 0, KEY_UP), diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 1ebc7e08d6e5..20ed52ae1714 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -36,7 +36,7 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <mach/irda.h> #include <mach/tc.h> #include <mach/board-sx1.h> diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 931f3f6d396b..4f5fd4a084c0 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -24,12 +24,11 @@ #include <mach/hardware.h> -#include "../plat-omap/sram.h" - #include "soc.h" #include "iomap.h" #include "clock.h" #include "opp.h" +#include "sram.h" __u32 arm_idlect1_mask; struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 28aea55a412e..cb7c6ae2e3fc 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -27,10 +27,9 @@ #include <mach/hardware.h> #include <mach/usb.h> /* for OTG_BASE */ -#include "../plat-omap/sram.h" - #include "iomap.h" #include "clock.h" +#include "sram.h" /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */ #define IDL_CLKOUT_ARM_SHIFT 12 diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index ecd0bb664dad..b53e0854422f 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -26,11 +26,10 @@ #ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H #define __ARCH_ARM_MACH_OMAP1_COMMON_H -#include "../plat-omap/common.h" #include <linux/mtd/mtd.h> #include <linux/i2c-omap.h> -#include "../plat-omap/i2c.h" +#include <plat/i2c.h> #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 745031870ce4..0af635205e8a 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -28,12 +28,11 @@ #include <mach/camera.h> #include <mach/hardware.h> -#include "../plat-omap/sram.h" - #include "common.h" #include "clock.h" #include "dma.h" #include "mmc.h" +#include "sram.h" #if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 71305c15fbd5..e190611e4b46 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -25,7 +25,7 @@ #include <linux/device.h> #include <linux/io.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <mach/tc.h> #include <mach/irqs.h> @@ -321,6 +321,9 @@ static int __init omap1_system_dma_init(void) d->dev_caps = ENABLE_1510_MODE; enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; + if (cpu_is_omap16xx()) + d->dev_caps = ENABLE_16XX_MODE; + d->dev_caps |= SRC_PORT; d->dev_caps |= DST_PORT; d->dev_caps |= SRC_INDEX; diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index d940fac9a9ed..8bd71b2d0967 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -27,12 +27,11 @@ #include <asm/irq.h> #include <asm/mach/irq.h> -#include <../plat-omap/fpga.h> - #include <mach/hardware.h> #include "iomap.h" #include "common.h" +#include "fpga.h" static void fpga_mask_irq(struct irq_data *d) { diff --git a/arch/arm/plat-omap/fpga.h b/arch/arm/mach-omap1/fpga.h index 54faaa93e6f4..4b4307a80e48 100644 --- a/arch/arm/plat-omap/fpga.h +++ b/arch/arm/mach-omap1/fpga.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/fpga.h - * * Interrupt handler for OMAP-1510 FPGA * * Copyright (C) 2001 RidgeRun, Inc. @@ -38,26 +36,6 @@ #define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ #define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ -/* NOTE: most boards don't have a static mapping for the FPGA ... */ -struct h2p2_dbg_fpga { - /* offset 0x00 */ - u16 smc91x[8]; - /* offset 0x10 */ - u16 fpga_rev; - u16 board_rev; - u16 gpio_outputs; - u16 leds; - /* offset 0x18 */ - u16 misc_inputs; - u16 lan_status; - u16 lan_reset; - u16 reserved0; - /* offset 0x20 */ - u16 ps2_data; - u16 ps2_ctrl; - /* plus also 4 rs232 ports ... */ -}; - /* LEDs definition on debug board (16 LEDs, all physically green) */ #define H2P2_DBG_FPGA_LED_GREEN (1 << 15) #define H2P2_DBG_FPGA_LED_AMBER (1 << 14) diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 98e6f39224a4..02b3eb2e201c 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE #define OMAP1510_GPIO_BASE 0xFFFCE000 diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 33f419236b17..b9952a258d82 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP1610_GPIO1_BASE 0xfffbe400 #define OMAP1610_GPIO2_BASE 0xfffbec00 #define OMAP1610_GPIO3_BASE 0xfffbb400 diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 958ce9acee95..f5819b2b7cbe 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -19,6 +19,8 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <mach/irqs.h> + #define OMAP7XX_GPIO1_BASE 0xfffbc000 #define OMAP7XX_GPIO2_BASE 0xfffbc800 #define OMAP7XX_GPIO3_BASE 0xfffbd000 diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index 32bcbb8d6c73..faca808cb3d9 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -23,7 +23,7 @@ #include <mach/mux.h> #include "soc.h" -#include "../plat-omap/i2c.h" +#include <plat/i2c.h> #define OMAP_I2C_SIZE 0x3f #define OMAP1_I2C_BASE 0xfffb3800 @@ -54,6 +54,9 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata, struct platform_device *pdev; struct resource *res; + if (bus_id > 1) + return -EINVAL; + omap1_i2c_mux_pins(bus_id); pdev = &omap_i2c_devices[bus_id - 1]; diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S index 88f08cab1717..78a8c6c24764 100644 --- a/arch/arm/mach-omap1/include/mach/entry-macro.S +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -13,8 +13,6 @@ #include <mach/hardware.h> #include <mach/irqs.h> -#include "../../iomap.h" - .macro get_irqnr_preamble, base, tmp .endm diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h deleted file mode 100644 index ebf86c0f4f46..000000000000 --- a/arch/arm/mach-omap1/include/mach/gpio.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/gpio.h - */ diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h index dc3237bd72d2..5875a5098d35 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -39,7 +39,7 @@ #include <asm/sizes.h> #ifndef __ASSEMBLER__ #include <asm/types.h> -#include "../../mach-omap1/soc.h" +#include <mach/soc.h> /* * NOTE: Please use ioremap + __raw_read/write where possible instead of these @@ -72,6 +72,9 @@ static inline u32 omap_cs3_phys(void) #endif /* ifndef __ASSEMBLER__ */ +#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ +#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) + #include <mach/serial.h> /* diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index 351ae4f2c514..3c2530523111 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -19,7 +19,7 @@ * because of the strncmp(). */ #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__) -#include "../../mach-omap1/soc.h" +#include <mach/soc.h> /* * OMAP-1510 Local Bus address offset diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h new file mode 100644 index 000000000000..6cf9c1cc2bef --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/soc.h @@ -0,0 +1,229 @@ +/* + * OMAP cpu type detection + * + * Copyright (C) 2004, 2008 Nokia Corporation + * + * Copyright (C) 2009-11 Texas Instruments. + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_CPU_H +#define __ASM_ARCH_OMAP_CPU_H + +#ifndef __ASSEMBLY__ + +#include <linux/bitops.h> + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP1 +#undef OMAP_NAME + +#ifdef CONFIG_ARCH_OMAP730 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap730 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP850 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap850 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP15XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap1510 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP16XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap16xx +# endif +#endif + +/* + * omap_rev bits: + * CPU id bits (0730, 1510, 1710, 2422...) [31:16] + * CPU revision (See _REV_ defined in cpu.h) [15:08] + * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + */ +unsigned int omap_rev(void); + +/* + * Get the CPU revision for OMAP devices + */ +#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) + +/* + * Macros to group OMAP into cpu classes. + * These can be used in most places. + * cpu_is_omap7xx(): True for OMAP730, OMAP850 + * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 + * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 + */ +#define GET_OMAP_CLASS (omap_rev() & 0xff) + +#define IS_OMAP_CLASS(class, id) \ +static inline int is_omap ##class (void) \ +{ \ + return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) + +#define IS_OMAP_SUBCLASS(subclass, id) \ +static inline int is_omap ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +IS_OMAP_CLASS(7xx, 0x07) +IS_OMAP_CLASS(15xx, 0x15) +IS_OMAP_CLASS(16xx, 0x16) + +#define cpu_is_omap7xx() 0 +#define cpu_is_omap15xx() 0 +#define cpu_is_omap16xx() 0 + +#if defined(MULTI_OMAP1) +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() is_omap15xx() +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() is_omap16xx() +# endif +#else +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() 1 +# endif +#endif + +/* + * Macros to detect individual cpu types. + * These are only rarely needed. + * cpu_is_omap310(): True for OMAP310 + * cpu_is_omap1510(): True for OMAP1510 + * cpu_is_omap1610(): True for OMAP1610 + * cpu_is_omap1611(): True for OMAP1611 + * cpu_is_omap5912(): True for OMAP5912 + * cpu_is_omap1621(): True for OMAP1621 + * cpu_is_omap1710(): True for OMAP1710 + */ +#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(310, 0x0310) +IS_OMAP_TYPE(1510, 0x1510) +IS_OMAP_TYPE(1610, 0x1610) +IS_OMAP_TYPE(1611, 0x1611) +IS_OMAP_TYPE(5912, 0x1611) +IS_OMAP_TYPE(1621, 0x1621) +IS_OMAP_TYPE(1710, 0x1710) + +#define cpu_is_omap310() 0 +#define cpu_is_omap1510() 0 +#define cpu_is_omap1610() 0 +#define cpu_is_omap5912() 0 +#define cpu_is_omap1611() 0 +#define cpu_is_omap1621() 0 +#define cpu_is_omap1710() 0 + +/* These are needed to compile common code */ +#ifdef CONFIG_ARCH_OMAP1 +#define cpu_is_omap242x() 0 +#define cpu_is_omap2430() 0 +#define cpu_is_omap243x() 0 +#define cpu_is_omap24xx() 0 +#define cpu_is_omap34xx() 0 +#define cpu_is_omap44xx() 0 +#define soc_is_omap54xx() 0 +#define soc_is_am33xx() 0 +#define cpu_class_is_omap1() 1 +#define cpu_class_is_omap2() 0 +#endif + +/* + * Whether we have MULTI_OMAP1 or not, we still need to distinguish + * between 310 vs. 1510 and 1611B/5912 vs. 1710. + */ + +#if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap310 +# undef cpu_is_omap1510 +# define cpu_is_omap310() is_omap310() +# define cpu_is_omap1510() is_omap1510() +#endif + +#if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap1610 +# undef cpu_is_omap1611 +# undef cpu_is_omap5912 +# undef cpu_is_omap1621 +# undef cpu_is_omap1710 +# define cpu_is_omap1610() is_omap1610() +# define cpu_is_omap1611() is_omap1611() +# define cpu_is_omap5912() is_omap5912() +# define cpu_is_omap1621() is_omap1621() +# define cpu_is_omap1710() is_omap1710() +#endif + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 44389d7cd255..499b8accb83d 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -18,7 +18,7 @@ #include <mach/mux.h> #include <mach/tc.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "iomap.h" #include "common.h" @@ -134,7 +134,6 @@ void __init omap1_init_early(void) */ omap1_clk_init(); omap1_mux_init(); - omap_init_consistent_dma_size(); } void __init omap1_init_late(void) diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h index 330c4716b028..f4e2d7a21365 100644 --- a/arch/arm/mach-omap1/iomap.h +++ b/arch/arm/mach-omap1/iomap.h @@ -22,9 +22,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) - /* * ---------------------------------------------------------------------------- * Omap1 specific IO mapping diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 7ed8c1857d56..77924be37d41 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -27,7 +27,7 @@ #include <linux/interrupt.h> #include <linux/io.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <mach/hardware.h> #include <mach/lcdc.h> diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index c6d8fdf92e9c..b0d4723c9a90 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -19,7 +19,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <mach/mux.h> #include "soc.h" #include <linux/platform_data/asoc-ti-mcbsp.h> diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index b2c2328d7c18..7a7690ab6cb8 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -44,6 +44,7 @@ #include <linux/io.h> #include <linux/atomic.h> +#include <asm/fncpy.h> #include <asm/system_misc.h> #include <asm/irq.h> #include <asm/mach/time.h> @@ -51,16 +52,15 @@ #include <mach/tc.h> #include <mach/mux.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <plat/dmtimer.h> #include <mach/irqs.h> -#include "../plat-omap/sram.h" - #include "iomap.h" #include "clock.h" #include "pm.h" +#include "sram.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index 0e628743bd03..a908c51839a4 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -36,6 +36,8 @@ #include <asm/assembler.h> +#include <mach/hardware.h> + #include "iomap.h" #include "pm.h" diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h index 6cf9c1cc2bef..69daf0187b1d 100644 --- a/arch/arm/mach-omap1/soc.h +++ b/arch/arm/mach-omap1/soc.h @@ -1,229 +1,4 @@ /* - * OMAP cpu type detection - * - * Copyright (C) 2004, 2008 Nokia Corporation - * - * Copyright (C) 2009-11 Texas Instruments. - * - * Written by Tony Lindgren <tony.lindgren@nokia.com> - * - * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * + * We can move mach/soc.h here once the drivers are fixed */ - -#ifndef __ASM_ARCH_OMAP_CPU_H -#define __ASM_ARCH_OMAP_CPU_H - -#ifndef __ASSEMBLY__ - -#include <linux/bitops.h> - -/* - * Test if multicore OMAP support is needed - */ -#undef MULTI_OMAP1 -#undef OMAP_NAME - -#ifdef CONFIG_ARCH_OMAP730 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap730 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP850 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap850 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP15XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap1510 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP16XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap16xx -# endif -#endif - -/* - * omap_rev bits: - * CPU id bits (0730, 1510, 1710, 2422...) [31:16] - * CPU revision (See _REV_ defined in cpu.h) [15:08] - * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] - */ -unsigned int omap_rev(void); - -/* - * Get the CPU revision for OMAP devices - */ -#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) - -/* - * Macros to group OMAP into cpu classes. - * These can be used in most places. - * cpu_is_omap7xx(): True for OMAP730, OMAP850 - * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 - * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 - */ -#define GET_OMAP_CLASS (omap_rev() & 0xff) - -#define IS_OMAP_CLASS(class, id) \ -static inline int is_omap ##class (void) \ -{ \ - return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) - -#define IS_OMAP_SUBCLASS(subclass, id) \ -static inline int is_omap ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -IS_OMAP_CLASS(7xx, 0x07) -IS_OMAP_CLASS(15xx, 0x15) -IS_OMAP_CLASS(16xx, 0x16) - -#define cpu_is_omap7xx() 0 -#define cpu_is_omap15xx() 0 -#define cpu_is_omap16xx() 0 - -#if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() is_omap15xx() -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() is_omap16xx() -# endif -#else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() 1 -# endif -#endif - -/* - * Macros to detect individual cpu types. - * These are only rarely needed. - * cpu_is_omap310(): True for OMAP310 - * cpu_is_omap1510(): True for OMAP1510 - * cpu_is_omap1610(): True for OMAP1610 - * cpu_is_omap1611(): True for OMAP1611 - * cpu_is_omap5912(): True for OMAP5912 - * cpu_is_omap1621(): True for OMAP1621 - * cpu_is_omap1710(): True for OMAP1710 - */ -#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) - -#define IS_OMAP_TYPE(type, id) \ -static inline int is_omap ##type (void) \ -{ \ - return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ -} - -IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(1510, 0x1510) -IS_OMAP_TYPE(1610, 0x1610) -IS_OMAP_TYPE(1611, 0x1611) -IS_OMAP_TYPE(5912, 0x1611) -IS_OMAP_TYPE(1621, 0x1621) -IS_OMAP_TYPE(1710, 0x1710) - -#define cpu_is_omap310() 0 -#define cpu_is_omap1510() 0 -#define cpu_is_omap1610() 0 -#define cpu_is_omap5912() 0 -#define cpu_is_omap1611() 0 -#define cpu_is_omap1621() 0 -#define cpu_is_omap1710() 0 - -/* These are needed to compile common code */ -#ifdef CONFIG_ARCH_OMAP1 -#define cpu_is_omap242x() 0 -#define cpu_is_omap2430() 0 -#define cpu_is_omap243x() 0 -#define cpu_is_omap24xx() 0 -#define cpu_is_omap34xx() 0 -#define cpu_is_omap44xx() 0 -#define soc_is_omap54xx() 0 -#define soc_is_am33xx() 0 -#define cpu_class_is_omap1() 1 -#define cpu_class_is_omap2() 0 -#endif - -/* - * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 310 vs. 1510 and 1611B/5912 vs. 1710. - */ - -#if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap310 -# undef cpu_is_omap1510 -# define cpu_is_omap310() is_omap310() -# define cpu_is_omap1510() is_omap1510() -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap1610 -# undef cpu_is_omap1611 -# undef cpu_is_omap5912 -# undef cpu_is_omap1621 -# undef cpu_is_omap1710 -# define cpu_is_omap1610() is_omap1610() -# define cpu_is_omap1611() is_omap1611() -# define cpu_is_omap5912() is_omap5912() -# define cpu_is_omap1621() is_omap1621() -# define cpu_is_omap1710() is_omap1710() -#endif - -#endif /* __ASSEMBLY__ */ -#endif +#include <mach/soc.h> diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c new file mode 100644 index 000000000000..6431b0f862ce --- /dev/null +++ b/arch/arm/mach-omap1/sram-init.c @@ -0,0 +1,76 @@ +/* + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/fncpy.h> +#include <asm/tlb.h> +#include <asm/cacheflush.h> + +#include <asm/mach/map.h> + +#include "soc.h" +#include "sram.h" + +#define OMAP1_SRAM_PA 0x20000000 +#define SRAM_BOOTLOADER_SZ 0x80 + +/* + * The amount of SRAM depends on the core type. + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +static void __init omap_detect_and_map_sram(void) +{ + unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ; + unsigned long omap_sram_start = OMAP1_SRAM_PA; + unsigned long omap_sram_size; + + if (cpu_is_omap7xx()) + omap_sram_size = 0x32000; /* 200K */ + else if (cpu_is_omap15xx()) + omap_sram_size = 0x30000; /* 192K */ + else if (cpu_is_omap1610() || cpu_is_omap1611() || + cpu_is_omap1621() || cpu_is_omap1710()) + omap_sram_size = 0x4000; /* 16K */ + else { + pr_err("Could not detect SRAM size\n"); + omap_sram_size = 0x4000; + } + + omap_map_sram(omap_sram_start, omap_sram_size, + omap_sram_skip, 1); +} + +static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); + +void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) +{ + BUG_ON(!_omap_sram_reprogram_clock); + /* On 730, bit 13 must always be 1 */ + if (cpu_is_omap7xx()) + ckctl |= 0x2000; + _omap_sram_reprogram_clock(dpllctl, ckctl); +} + +int __init omap_sram_init(void) +{ + omap_detect_and_map_sram(); + _omap_sram_reprogram_clock = + omap_sram_push(omap1_sram_reprogram_clock, + omap1_sram_reprogram_clock_sz); + + return 0; +} diff --git a/arch/arm/mach-omap1/sram.h b/arch/arm/mach-omap1/sram.h new file mode 100644 index 000000000000..d5a6c8362301 --- /dev/null +++ b/arch/arm/mach-omap1/sram.h @@ -0,0 +1,7 @@ +#include <plat/sram.h> + +extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); + +/* Do not use these */ +extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); +extern unsigned long omap1_sram_reprogram_clock_sz; diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index cdeb9d3ef640..bde7a35e5000 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -25,6 +25,7 @@ #include <linux/err.h> #include <linux/slab.h> #include <linux/platform_device.h> +#include <linux/platform_data/dmtimer-omap.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 74529549130c..41152fadd4c0 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -50,7 +50,7 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> -#include <plat/dmtimer.h> +#include <plat/counter-32k.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 84267edd9421..104fed366b8f 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -301,7 +301,7 @@ static inline void otg_device_init(struct omap_usb_config *pdata) #endif -u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) +static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) { u32 syscon1 = 0; @@ -409,7 +409,7 @@ u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) return syscon1 << 16; } -u32 __init omap1_usb1_init(unsigned nwires) +static u32 __init omap1_usb1_init(unsigned nwires) { u32 syscon1 = 0; @@ -475,7 +475,7 @@ bad: return syscon1 << 20; } -u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) +static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) { u32 syscon1 = 0; diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 798f35b8ea59..745401020c2b 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -5,7 +5,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ - omap_device.o + omap_device.o sram.o omap-2-3-common = irq.o hwmod-common = omap_hwmod.o \ @@ -73,6 +73,8 @@ obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o endif # Power Management +obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o + ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index acb0a524ff7b..4815ea6f8f5d 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -28,7 +28,6 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 6601754f9512..7b201546834d 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -31,7 +31,7 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 488f86fd0e72..c8e37dc00892 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -44,8 +44,6 @@ #include <video/omap-panel-tfp410.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <mach/hardware.h> - #include "common.h" #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 699caec8f9e2..ebbc2adb499e 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -297,6 +297,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3517_init, .init_late = am35xx_init_late, - .timer = &omap3_timer, + .timer = &omap3_gp_timer, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 475e14f07216..f0715a369c44 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -97,6 +97,23 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .dt_compat = omap3_boards_compat, .restart = omap3xxx_restart, MACHINE_END + +static const char *omap3_gp_boards_compat[] __initdata = { + "ti,omap3-beagle", + NULL, +}; + +DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3430_init_early, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .timer = &omap3_secure_timer, + .dt_compat = omap3_gp_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END #endif #ifdef CONFIG_SOC_AM33XX diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 3c1e458f68a1..9a3878ec2256 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -32,8 +32,8 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat-omap/dma-omap.h> -#include "debug-devices.h" +#include <linux/omap-dma.h> +#include <plat/debug-devices.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index cea5d5292628..0f24cb84ba5a 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -579,6 +579,11 @@ static void __init igep_wlan_bt_init(void) } else return; + /* Make sure that the GPIO pins are muxed correctly */ + omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT); + err = gpio_request_array(igep_wlan_bt_gpios, ARRAY_SIZE(igep_wlan_bt_gpios)); if (err) { diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 140b73094aff..c8fde3e56441 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -45,7 +45,6 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include "common.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 07005fe40a2a..60529e0b3d67 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -31,7 +31,7 @@ #include <asm/system_info.h> #include "common.h" -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "gpmc-smc91x.h" #include "board-rx51.h" diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index bf8f74b0ce3e..ee1045c0ad67 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -24,7 +24,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "common.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c index a0ae3c09f97a..d8620105c42a 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c @@ -25,14 +25,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include "../plat-omap/sram.h" - #include "clock.h" #include "clock2xxx.h" #include "opp2xxx.h" #include "cm2xxx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "sram.h" /* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 7af224208a25..ae2b35e76dc8 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -33,8 +33,6 @@ #include <linux/cpufreq.h> #include <linux/slab.h> -#include "../plat-omap/sram.h" - #include "soc.h" #include "clock.h" #include "clock2xxx.h" @@ -42,6 +40,7 @@ #include "cm2xxx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "sram.h" const struct prcm_config *curr_prcm_set; const struct prcm_config *rate_table; diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index 8e48c6d602e7..eb69acf21014 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -21,12 +21,11 @@ #include <linux/clk.h> #include <linux/io.h> -#include "../plat-omap/sram.h" - #include "clock.h" #include "clock3xxx.h" #include "clock34xx.h" #include "sdrc.h" +#include "sram.h" #define CYCLES_PER_MHZ 1000000 diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index b2dfcd777194..058ce3c0873e 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -22,8 +22,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "../plat-omap/common.h" - #include "clockdomain.h" #include "cm.h" #include "cm33xx.h" diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c index 0bab493ec133..40b3b5a84458 100644 --- a/arch/arm/mach-omap2/cm_common.c +++ b/arch/arm/mach-omap2/cm_common.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/errno.h> #include "cm2xxx.h" #include "cm3xxx.h" diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index ad856092c06a..d246efd9f734 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -63,30 +63,36 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct spi_board_info *spi_bi = &ads7846_spi_board_info; int err; - err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); - if (err) { - pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); - return; - } + /* + * If a board defines get_pendown_state() function, request the pendown + * GPIO and set the GPIO debounce time. + * If a board does not define the get_pendown_state() function, then + * the ads7846 driver will setup the pendown GPIO itself. + */ + if (board_pdata && board_pdata->get_pendown_state) { + err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); + if (err) { + pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); + return; + } + + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); - if (gpio_debounce) - gpio_set_debounce(gpio_pendown, gpio_debounce); + gpio_export(gpio_pendown, 0); + } spi_bi->bus_num = bus_num; spi_bi->irq = gpio_to_irq(gpio_pendown); + ads7846_config.gpio_pendown = gpio_pendown; + if (board_pdata) { board_pdata->gpio_pendown = gpio_pendown; + board_pdata->gpio_pendown_debounce = gpio_debounce; spi_bi->platform_data = board_pdata; - if (board_pdata->get_pendown_state) - gpio_export(gpio_pendown, 0); - } else { - ads7846_config.gpio_pendown = gpio_pendown; } - if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state)) - gpio_free(gpio_pendown); - spi_register_board_info(&ads7846_spi_board_info, 1); } #else diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index c57eeeac7d11..3bbcde87dead 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -34,8 +34,6 @@ #include <asm/proc-fns.h> -#include "../plat-omap/common.h" - #include "i2c.h" #include "serial.h" @@ -84,6 +82,7 @@ extern void omap2_init_common_infrastructure(void); extern struct sys_timer omap2_timer; extern struct sys_timer omap3_timer; extern struct sys_timer omap3_secure_timer; +extern struct sys_timer omap3_gp_timer; extern struct sys_timer omap3_am33xx_timer; extern struct sys_timer omap4_timer; extern struct sys_timer omap5_timer; @@ -280,5 +279,8 @@ struct omap2_hsmmc_info; extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers); extern void omap_reserve(void); +struct omap_hwmod; +extern int omap_dss_reset(struct omap_hwmod *); + #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index d2215e9873a5..cafe04660a4b 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -24,7 +24,7 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "iomap.h" #include "omap_hwmod.h" diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index b1926cd70468..612b98249873 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -28,7 +28,7 @@ #include <linux/init.h> #include <linux/device.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "soc.h" #include "omap_hwmod.h" @@ -276,6 +276,9 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) return -ENOMEM; } + if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) + d->dev_caps |= HS_CHANNELS_RESERVED; + /* Check the capabilities register for descriptor loading feature */ if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS) dma_common_ch_end = CCDN; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index e3406dce59be..4a964338992a 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -14,7 +14,6 @@ #include <linux/string.h> #include <linux/delay.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <linux/platform_data/gpio-omap.h> #include "soc.h" diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index be092e8e5d85..fbb9b152cd5e 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -107,6 +107,19 @@ int omap_i2c_reset(struct omap_hwmod *oh) return 0; } +static int __init omap_i2c_nr_ports(void) +{ + int ports = 0; + + if (cpu_is_omap24xx()) + ports = 2; + else if (cpu_is_omap34xx()) + ports = 3; + else if (cpu_is_omap44xx()) + ports = 4; + return ports; +} + static const char name[] = "omap_i2c"; int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, @@ -119,6 +132,9 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, struct omap_i2c_bus_platform_data *pdata; struct omap_i2c_dev_attr *dev_attr; + if (bus_id > omap_i2c_nr_ports()) + return -EINVAL; + omap2_i2c_mux_pins(bus_id); l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id); diff --git a/arch/arm/mach-omap2/i2c.h b/arch/arm/mach-omap2/i2c.h index 81dbb992a6bc..42b6f2e7d190 100644 --- a/arch/arm/mach-omap2/i2c.h +++ b/arch/arm/mach-omap2/i2c.h @@ -19,7 +19,7 @@ * */ -#include "../plat-omap/i2c.h" +#include <plat/i2c.h> #ifndef __MACH_OMAP2_I2C_H #define __MACH_OMAP2_I2C_H diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index f1e121502789..45cc7ed4dd58 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -28,6 +28,9 @@ #include "soc.h" #include "control.h" +#define OMAP4_SILICON_TYPE_STANDARD 0x01 +#define OMAP4_SILICON_TYPE_PERFORMANCE 0x02 + static unsigned int omap_revision; static const char *cpu_rev; u32 omap_features; @@ -273,25 +276,11 @@ void __init omap4xxx_check_features(void) { u32 si_type; - if (cpu_is_omap443x()) - omap_features |= OMAP4_HAS_MPU_1GHZ; - + si_type = + (read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1) >> 16) & 0x03; - if (cpu_is_omap446x()) { - si_type = - read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1); - switch ((si_type & (3 << 16)) >> 16) { - case 2: - /* High performance device */ - omap_features |= OMAP4_HAS_MPU_1_5GHZ; - break; - case 1: - default: - /* Standard device */ - omap_features |= OMAP4_HAS_MPU_1_2GHZ; - break; - } - } + if (si_type == OMAP4_SILICON_TYPE_PERFORMANCE) + omap_features = OMAP4_HAS_PERF_SILICON; } void __init ti81xx_check_features(void) diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 4b5cbdfac028..cfaed13d0040 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -13,7 +13,7 @@ #include <linux/serial_reg.h> -#include <../mach-omap2/serial.h> +#include <mach/serial.h> #define UART_OFFSET(addr) ((addr) & 0x00ffffff) diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h deleted file mode 100644 index 5621cc59c9f4..000000000000 --- a/arch/arm/mach-omap2/include/mach/gpio.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/gpio.h - */ diff --git a/arch/arm/mach-omap2/include/mach/serial.h b/arch/arm/mach-omap2/include/mach/serial.h new file mode 100644 index 000000000000..70eda00db7a4 --- /dev/null +++ b/arch/arm/mach-omap2/include/mach/serial.h @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Memory entry used for the DEBUG_LL UART configuration, relative to + * start of RAM. See also uncompress.h and debug-macro.S. + * + * Note that using a memory location for storing the UART configuration + * has at least two limitations: + * + * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the + * uncompress code could then partially overwrite itself + * 2. We assume printascii is called at least once before paging_init, + * and addruart has a chance to read OMAP_UART_INFO + */ +#define OMAP_UART_INFO_OFS 0x3ffc + +/* OMAP2 serial ports */ +#define OMAP2_UART1_BASE 0x4806a000 +#define OMAP2_UART2_BASE 0x4806c000 +#define OMAP2_UART3_BASE 0x4806e000 + +/* OMAP3 serial ports */ +#define OMAP3_UART1_BASE OMAP2_UART1_BASE +#define OMAP3_UART2_BASE OMAP2_UART2_BASE +#define OMAP3_UART3_BASE 0x49020000 +#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */ +#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */ + +/* OMAP4 serial ports */ +#define OMAP4_UART1_BASE OMAP2_UART1_BASE +#define OMAP4_UART2_BASE OMAP2_UART2_BASE +#define OMAP4_UART3_BASE 0x48020000 +#define OMAP4_UART4_BASE 0x4806e000 + +/* TI81XX serial ports */ +#define TI81XX_UART1_BASE 0x48020000 +#define TI81XX_UART2_BASE 0x48022000 +#define TI81XX_UART3_BASE 0x48024000 + +/* AM3505/3517 UART4 */ +#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ + +/* AM33XX serial port */ +#define AM33XX_UART1_BASE 0x44E09000 + +/* OMAP5 serial ports */ +#define OMAP5_UART1_BASE OMAP2_UART1_BASE +#define OMAP5_UART2_BASE OMAP2_UART2_BASE +#define OMAP5_UART3_BASE OMAP4_UART3_BASE +#define OMAP5_UART4_BASE OMAP4_UART4_BASE +#define OMAP5_UART5_BASE 0x48066000 +#define OMAP5_UART6_BASE 0x48068000 + +/* External port on Zoom2/3 */ +#define ZOOM_UART_BASE 0x10000000 +#define ZOOM_UART_VIRT 0xfa400000 + +#define OMAP_PORT_SHIFT 2 +#define ZOOM_PORT_SHIFT 1 + +#define OMAP24XX_BASE_BAUD (48000000/16) + +/* + * DEBUG_LL port encoding stored into the UART1 scratchpad register by + * decomp_setup in uncompress.h + */ +#define OMAP2UART1 21 +#define OMAP2UART2 22 +#define OMAP2UART3 23 +#define OMAP3UART1 OMAP2UART1 +#define OMAP3UART2 OMAP2UART2 +#define OMAP3UART3 33 +#define OMAP3UART4 34 /* Only on 36xx */ +#define OMAP4UART1 OMAP2UART1 +#define OMAP4UART2 OMAP2UART2 +#define OMAP4UART3 43 +#define OMAP4UART4 44 +#define TI81XXUART1 81 +#define TI81XXUART2 82 +#define TI81XXUART3 83 +#define AM33XXUART1 84 +#define OMAP5UART3 OMAP4UART3 +#define OMAP5UART4 OMAP4UART4 +#define ZOOM_UART 95 /* Only on zoom2/3 */ + +#ifndef __ASSEMBLER__ + +struct omap_board_data; +struct omap_uart_port_info; + +extern void omap_serial_init(void); +extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); +extern void omap_serial_init_port(struct omap_board_data *bdata, + struct omap_uart_port_info *platform_data); +#endif diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h index 28d1ec0e869a..8e3546d3e041 100644 --- a/arch/arm/mach-omap2/include/mach/uncompress.h +++ b/arch/arm/mach-omap2/include/mach/uncompress.h @@ -23,7 +23,7 @@ #include <asm/memory.h> #include <asm/mach-types.h> -#include <../mach-omap2/serial.h> +#include <mach/serial.h> #define MDR1_MODE_MASK 0x07 diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 924bf24693cd..2c3fdd65387b 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -25,9 +25,7 @@ #include <asm/tlb.h> #include <asm/mach/map.h> -#include <plat-omap/dma-omap.h> - -#include "../plat-omap/sram.h" +#include <linux/omap-dma.h> #include "omap_hwmod.h" #include "soc.h" @@ -44,6 +42,7 @@ #include "sdrc.h" #include "control.h" #include "serial.h" +#include "sram.h" #include "cm2xxx.h" #include "cm3xxx.h" #include "prm.h" @@ -51,6 +50,10 @@ #include "prcm_mpu44xx.h" #include "prminst44xx.h" #include "cminst44xx.h" +#include "prm2xxx.h" +#include "prm3xxx.h" +#include "prm44xx.h" + /* * The machine specific code may provide the extra mapping besides the * default mapping provided here. @@ -361,11 +364,6 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } -static void __init omap_common_init_early(void) -{ - omap_init_consistent_dma_size(); -} - static void __init omap_hwmod_init_postsetup(void) { u8 postsetup_state; @@ -392,8 +390,8 @@ void __init omap2420_init_early(void) omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE)); omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), NULL); omap2xxx_check_revision(); + omap2xxx_prm_init(); omap2xxx_cm_init(); - omap_common_init_early(); omap2xxx_voltagedomains_init(); omap242x_powerdomains_init(); omap242x_clockdomains_init(); @@ -422,8 +420,8 @@ void __init omap2430_init_early(void) omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE)); omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), NULL); omap2xxx_check_revision(); + omap2xxx_prm_init(); omap2xxx_cm_init(); - omap_common_init_early(); omap2xxx_voltagedomains_init(); omap243x_powerdomains_init(); omap243x_clockdomains_init(); @@ -457,8 +455,8 @@ void __init omap3_init_early(void) omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL); omap3xxx_check_revision(); omap3xxx_check_features(); + omap3xxx_prm_init(); omap3xxx_cm_init(); - omap_common_init_early(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); @@ -497,7 +495,6 @@ void __init ti81xx_init_early(void) omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL); omap3xxx_check_revision(); ti81xx_check_features(); - omap_common_init_early(); omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); @@ -566,7 +563,6 @@ void __init am33xx_init_early(void) omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL); omap3xxx_check_revision(); ti81xx_check_features(); - omap_common_init_early(); am33xx_voltagedomains_init(); am33xx_powerdomains_init(); am33xx_clockdomains_init(); @@ -591,7 +587,7 @@ void __init omap4430_init_early(void) omap_cm_base_init(); omap4xxx_check_revision(); omap4xxx_check_features(); - omap_common_init_early(); + omap44xx_prm_init(); omap44xx_voltagedomains_init(); omap44xx_powerdomains_init(); omap44xx_clockdomains_init(); @@ -623,7 +619,6 @@ void __init omap5_init_early(void) omap_prm_base_init(); omap_cm_base_init(); omap5xxx_check_revision(); - omap_common_init_early(); } #endif diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index bf496510eb5e..df49f2a49461 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -21,7 +21,7 @@ #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/pm_runtime.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "omap_device.h" diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/mach-omap2/omap-pm-noop.c index 198685b894b0..6a3be2bebddb 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/mach-omap2/omap-pm-noop.c @@ -22,8 +22,8 @@ #include <linux/device.h> #include <linux/platform_device.h> -#include "../mach-omap2/omap_device.h" -#include "../mach-omap2/omap-pm.h" +#include "omap_device.h" +#include "omap-pm.h" static bool off_mode_enabled; static int dummy_context_loss_counter; diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 64fce07a3ccd..5695885ea340 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -25,8 +25,6 @@ #include <asm/mach/map.h> #include <asm/memblock.h> -#include "../plat-omap/sram.h" - #include "omap-wakeupgen.h" #include "soc.h" #include "iomap.h" @@ -37,6 +35,7 @@ #include "prcm_mpu44xx.h" #include "omap4-sar-layout.h" #include "omap-secure.h" +#include "sram.h" #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2cache_base; diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 0ef934fec364..e065daa537c0 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -441,19 +441,21 @@ int omap_device_get_context_loss_count(struct platform_device *pdev) /** * omap_device_count_resources - count number of struct resource entries needed * @od: struct omap_device * + * @flags: Type of resources to include when counting (IRQ/DMA/MEM) * * Count the number of struct resource entries needed for this * omap_device @od. Used by omap_device_build_ss() to determine how * much memory to allocate before calling * omap_device_fill_resources(). Returns the count. */ -static int omap_device_count_resources(struct omap_device *od) +static int omap_device_count_resources(struct omap_device *od, + unsigned long flags) { int c = 0; int i; for (i = 0; i < od->hwmods_cnt; i++) - c += omap_hwmod_count_resources(od->hwmods[i]); + c += omap_hwmod_count_resources(od->hwmods[i], flags); pr_debug("omap_device: %s: counted %d total resources across %d hwmods\n", od->pdev->name, c, od->hwmods_cnt); @@ -557,52 +559,73 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev, od->hwmods = hwmods; od->pdev = pdev; - res_count = omap_device_count_resources(od); /* + * Non-DT Boot: + * Here, pdev->num_resources = 0, and we should get all the + * resources from hwmod. + * * DT Boot: * OF framework will construct the resource structure (currently * does for MEM & IRQ resource) and we should respect/use these * resources, killing hwmod dependency. * If pdev->num_resources > 0, we assume that MEM & IRQ resources * have been allocated by OF layer already (through DTB). - * - * Non-DT Boot: - * Here, pdev->num_resources = 0, and we should get all the - * resources from hwmod. + * As preparation for the future we examine the OF provided resources + * to see if we have DMA resources provided already. In this case + * there is no need to update the resources for the device, we use the + * OF provided ones. * * TODO: Once DMA resource is available from OF layer, we should * kill filling any resources from hwmod. */ - if (res_count > pdev->num_resources) { - /* Allocate resources memory to account for new resources */ - res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL); - if (!res) - goto oda_exit3; - - /* - * If pdev->num_resources > 0, then assume that, - * MEM and IRQ resources will only come from DT and only - * fill DMA resource from hwmod layer. - */ - if (pdev->num_resources && pdev->resource) { - dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n", - __func__, res_count); - memcpy(res, pdev->resource, - sizeof(struct resource) * pdev->num_resources); - _od_fill_dma_resources(od, &res[pdev->num_resources]); - } else { - dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n", - __func__, res_count); - omap_device_fill_resources(od, res); + if (!pdev->num_resources) { + /* Count all resources for the device */ + res_count = omap_device_count_resources(od, IORESOURCE_IRQ | + IORESOURCE_DMA | + IORESOURCE_MEM); + } else { + /* Take a look if we already have DMA resource via DT */ + for (i = 0; i < pdev->num_resources; i++) { + struct resource *r = &pdev->resource[i]; + + /* We have it, no need to touch the resources */ + if (r->flags == IORESOURCE_DMA) + goto have_everything; } + /* Count only DMA resources for the device */ + res_count = omap_device_count_resources(od, IORESOURCE_DMA); + /* The device has no DMA resource, no need for update */ + if (!res_count) + goto have_everything; - ret = platform_device_add_resources(pdev, res, res_count); - kfree(res); + res_count += pdev->num_resources; + } - if (ret) - goto oda_exit3; + /* Allocate resources memory to account for new resources */ + res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL); + if (!res) + goto oda_exit3; + + if (!pdev->num_resources) { + dev_dbg(&pdev->dev, "%s: using %d resources from hwmod\n", + __func__, res_count); + omap_device_fill_resources(od, res); + } else { + dev_dbg(&pdev->dev, + "%s: appending %d DMA resources from hwmod\n", + __func__, res_count - pdev->num_resources); + memcpy(res, pdev->resource, + sizeof(struct resource) * pdev->num_resources); + _od_fill_dma_resources(od, &res[pdev->num_resources]); } + ret = platform_device_add_resources(pdev, res, res_count); + kfree(res); + + if (ret) + goto oda_exit3; + +have_everything: if (!pm_lats) { pm_lats = omap_default_latency; pm_lats_cnt = ARRAY_SIZE(omap_default_latency); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 3f3bf323e201..4653efb87a27 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -187,6 +187,8 @@ struct omap_hwmod_soc_ops { int (*is_hardreset_asserted)(struct omap_hwmod *oh, struct omap_hwmod_rst_info *ohri); int (*init_clkdm)(struct omap_hwmod *oh); + void (*update_context_lost)(struct omap_hwmod *oh); + int (*get_context_lost)(struct omap_hwmod *oh); }; /* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */ @@ -2015,6 +2017,42 @@ static void _reconfigure_io_chain(void) } /** + * _omap4_update_context_lost - increment hwmod context loss counter if + * hwmod context was lost, and clear hardware context loss reg + * @oh: hwmod to check for context loss + * + * If the PRCM indicates that the hwmod @oh lost context, increment + * our in-memory context loss counter, and clear the RM_*_CONTEXT + * bits. No return value. + */ +static void _omap4_update_context_lost(struct omap_hwmod *oh) +{ + if (oh->prcm.omap4.flags & HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT) + return; + + if (!prm_was_any_context_lost_old(oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.context_offs)) + return; + + oh->prcm.omap4.context_lost_counter++; + prm_clear_context_loss_flags_old(oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.context_offs); +} + +/** + * _omap4_get_context_lost - get context loss counter for a hwmod + * @oh: hwmod to get context loss counter for + * + * Returns the in-memory context loss counter for a hwmod. + */ +static int _omap4_get_context_lost(struct omap_hwmod *oh) +{ + return oh->prcm.omap4.context_lost_counter; +} + +/** * _enable - enable an omap_hwmod * @oh: struct omap_hwmod * * @@ -2097,6 +2135,9 @@ static int _enable(struct omap_hwmod *oh) if (soc_ops.enable_module) soc_ops.enable_module(oh); + if (soc_ops.update_context_lost) + soc_ops.update_context_lost(oh); + r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) : -EINVAL; if (!r) { @@ -3421,7 +3462,7 @@ int omap_hwmod_reset(struct omap_hwmod *oh) /** * omap_hwmod_count_resources - count number of struct resources needed by hwmod * @oh: struct omap_hwmod * - * @res: pointer to the first element of an array of struct resource to fill + * @flags: Type of resources to include when counting (IRQ/DMA/MEM) * * Count the number of struct resource array elements necessary to * contain omap_hwmod @oh resources. Intended to be called by code @@ -3434,20 +3475,25 @@ int omap_hwmod_reset(struct omap_hwmod *oh) * resource IDs. * */ -int omap_hwmod_count_resources(struct omap_hwmod *oh) +int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags) { - struct omap_hwmod_ocp_if *os; - struct list_head *p; - int ret; - int i = 0; + int ret = 0; - ret = _count_mpu_irqs(oh) + _count_sdma_reqs(oh); + if (flags & IORESOURCE_IRQ) + ret += _count_mpu_irqs(oh); - p = oh->slave_ports.next; + if (flags & IORESOURCE_DMA) + ret += _count_sdma_reqs(oh); - while (i < oh->slaves_cnt) { - os = _fetch_next_ocp_if(&p, &i); - ret += _count_ocp_if_addr_spaces(os); + if (flags & IORESOURCE_MEM) { + int i = 0; + struct omap_hwmod_ocp_if *os; + struct list_head *p = oh->slave_ports.next; + + while (i < oh->slaves_cnt) { + os = _fetch_next_ocp_if(&p, &i); + ret += _count_ocp_if_addr_spaces(os); + } } return ret; @@ -3942,17 +3988,21 @@ ohsps_unlock: * omap_hwmod_get_context_loss_count - get lost context count * @oh: struct omap_hwmod * * - * Query the powerdomain of of @oh to get the context loss - * count for this device. + * Returns the context loss count of associated @oh + * upon success, or zero if no context loss data is available. * - * Returns the context loss count of the powerdomain assocated with @oh - * upon success, or zero if no powerdomain exists for @oh. + * On OMAP4, this queries the per-hwmod context loss register, + * assuming one exists. If not, or on OMAP2/3, this queries the + * enclosing powerdomain context loss count. */ int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh) { struct powerdomain *pwrdm; int ret = 0; + if (soc_ops.get_context_lost) + return soc_ops.get_context_lost(oh); + pwrdm = omap_hwmod_get_pwrdm(oh); if (pwrdm) ret = pwrdm_get_context_loss_count(pwrdm); @@ -4067,6 +4117,8 @@ void __init omap_hwmod_init(void) soc_ops.deassert_hardreset = _omap4_deassert_hardreset; soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; soc_ops.init_clkdm = _init_clkdm; + soc_ops.update_context_lost = _omap4_update_context_lost; + soc_ops.get_context_lost = _omap4_get_context_lost; } else if (soc_is_am33xx()) { soc_ops.enable_module = _am33xx_enable_module; soc_ops.disable_module = _am33xx_disable_module; diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 87a3c5b7aa74..3ae852a522f9 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -2,7 +2,7 @@ * omap_hwmod macros, structures * * Copyright (C) 2009-2011 Nokia Corporation - * Copyright (C) 2012 Texas Instruments, Inc. + * Copyright (C) 2011-2012 Texas Instruments, Inc. * Paul Walmsley * * Created in collaboration with (alphabetical order): Benoît Cousson, @@ -394,12 +394,15 @@ struct omap_hwmod_omap2_prcm { /** * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data - * @clkctrl_reg: PRCM address of the clock control register - * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM + * @clkctrl_offs: offset of the PRCM clock control register + * @rstctrl_offs: offset of the XXX_RSTCTRL register located in the PRM + * @context_offs: offset of the RM_*_CONTEXT register * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM * @submodule_wkdep_bit: bit shift of the WKDEP range * @flags: PRCM register capabilities for this IP block + * @modulemode: allowable modulemodes + * @context_lost_counter: Count of module level context lost * * If @lostcontext_mask is not defined, context loss check code uses * whole register without masking. @lostcontext_mask should only be @@ -415,6 +418,7 @@ struct omap_hwmod_omap4_prcm { u8 submodule_wkdep_bit; u8 modulemode; u8 flags; + int context_lost_counter; }; @@ -633,7 +637,7 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs); u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs); int omap_hwmod_softreset(struct omap_hwmod *oh); -int omap_hwmod_count_resources(struct omap_hwmod *oh); +int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags); int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res); int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a8b3368dca3d..b5efe58c0be0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -15,8 +15,7 @@ #include <linux/i2c-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> - -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <plat/dmtimer.h> #include "omap_hwmod.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index dc768c50e523..6c8fa70ddadd 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -16,8 +16,7 @@ #include <linux/i2c-omap.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> - -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <plat/dmtimer.h> #include "omap_hwmod.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index 05c6a5906550..534974e08add 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -10,9 +10,8 @@ * published by the Free Software Foundation. */ -#include <plat-omap/dma-omap.h> - -#include "../plat-omap/common.h" +#include <linux/dmaengine.h> +#include <linux/omap-dma.h> #include "omap_hwmod.h" #include "hdq1w.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index a0116d08cf45..e596117004d4 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -10,7 +10,7 @@ */ #include <linux/platform_data/gpio-omap.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <plat/dmtimer.h> #include <linux/platform_data/spi-omap2-mcspi.h> @@ -58,8 +58,9 @@ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE), + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -268,6 +269,7 @@ struct omap_hwmod omap2xxx_timer1_hwmod = { }, .dev_attr = &capability_alwon_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer2 */ @@ -286,6 +288,7 @@ struct omap_hwmod omap2xxx_timer2_hwmod = { }, }, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer3 */ @@ -304,6 +307,7 @@ struct omap_hwmod omap2xxx_timer3_hwmod = { }, }, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer4 */ @@ -322,6 +326,7 @@ struct omap_hwmod omap2xxx_timer4_hwmod = { }, }, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer5 */ @@ -341,6 +346,7 @@ struct omap_hwmod omap2xxx_timer5_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer6 */ @@ -360,6 +366,7 @@ struct omap_hwmod omap2xxx_timer6_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer7 */ @@ -379,6 +386,7 @@ struct omap_hwmod omap2xxx_timer7_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer8 */ @@ -398,6 +406,7 @@ struct omap_hwmod omap2xxx_timer8_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer9 */ @@ -417,6 +426,7 @@ struct omap_hwmod omap2xxx_timer9_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer10 */ @@ -436,6 +446,7 @@ struct omap_hwmod omap2xxx_timer10_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer11 */ @@ -455,6 +466,7 @@ struct omap_hwmod omap2xxx_timer11_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer12 */ @@ -474,6 +486,7 @@ struct omap_hwmod omap2xxx_timer12_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* wd_timer2 */ diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index abe66ced903f..0f10919f227f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -19,7 +19,7 @@ #include <linux/power/smartreflex.h> #include <linux/platform_data/gpio-omap.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "l3_3xxx.h" #include "l4_3xxx.h" #include <linux/platform_data/asoc-ti-mcbsp.h> @@ -153,29 +153,16 @@ static struct omap_hwmod omap3xxx_debugss_hwmod = { }; /* timer class */ -static struct omap_hwmod_class_sysconfig omap3xxx_timer_1ms_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap3xxx_timer_1ms_hwmod_class = { - .name = "timer", - .sysc = &omap3xxx_timer_1ms_sysc, -}; - static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -224,7 +211,8 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .class = &omap3xxx_timer_1ms_hwmod_class, + .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer2 */ @@ -241,7 +229,8 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT, }, }, - .class = &omap3xxx_timer_1ms_hwmod_class, + .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer3 */ @@ -259,6 +248,7 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = { }, }, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer4 */ @@ -276,6 +266,7 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = { }, }, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer5 */ @@ -294,6 +285,7 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer6 */ @@ -312,6 +304,7 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer7 */ @@ -330,6 +323,7 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = { }, .dev_attr = &capability_dsp_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer8 */ @@ -348,6 +342,7 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = { }, .dev_attr = &capability_dsp_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer9 */ @@ -366,6 +361,7 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer10 */ @@ -383,7 +379,8 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = { }, }, .dev_attr = &capability_pwm_dev_attr, - .class = &omap3xxx_timer_1ms_hwmod_class, + .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer11 */ @@ -402,6 +399,7 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = { }, .dev_attr = &capability_pwm_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* timer12 */ @@ -425,6 +423,7 @@ static struct omap_hwmod omap3xxx_timer12_hwmod = { }, .dev_attr = &capability_secure_dev_attr, .class = &omap3xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index d6700d3ddd04..ce1661d18e56 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -24,15 +24,14 @@ #include <linux/platform_data/omap_ocp2scp.h> #include <linux/i2c-omap.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> +#include <linux/platform_data/omap_ocp2scp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include <plat/dmtimer.h> #include <plat/iommu.h> -#include "../plat-omap/common.h" - #include "omap_hwmod.h" #include "omap_hwmod_common_data.h" #include "cm1_44xx.h" @@ -3105,6 +3104,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_timer_1ms_sysc = { SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .clockact = CLOCKACT_TEST_ICLK, .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -3158,6 +3158,7 @@ static struct omap_hwmod omap44xx_timer1_hwmod = { .name = "timer1", .class = &omap44xx_timer_1ms_hwmod_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer1_irqs, .main_clk = "timer1_fck", .prcm = { @@ -3180,6 +3181,7 @@ static struct omap_hwmod omap44xx_timer2_hwmod = { .name = "timer2", .class = &omap44xx_timer_1ms_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer2_irqs, .main_clk = "timer2_fck", .prcm = { @@ -3354,6 +3356,7 @@ static struct omap_hwmod omap44xx_timer10_hwmod = { .name = "timer10", .class = &omap44xx_timer_1ms_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SET_DEFAULT_CLOCKACT, .mpu_irqs = omap44xx_timer10_irqs, .main_clk = "timer10_fck", .prcm = { diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 3cf4fdfd7ab0..e2c291f52f92 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -30,7 +30,6 @@ #include "clock.h" #include "powerdomain.h" #include "clockdomain.h" -#include <plat/dmtimer.h> #include "omap-pm.h" #include "soc.h" diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 3d35bd64487c..c333fa6dffa8 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -31,14 +31,14 @@ #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> +#include <asm/fncpy.h> + #include <asm/mach/time.h> #include <asm/mach/irq.h> #include <asm/mach-types.h> #include <asm/system_misc.h> -#include <plat-omap/dma-omap.h> - -#include "../plat-omap/sram.h" +#include <linux/omap-dma.h> #include "soc.h" #include "common.h" @@ -48,6 +48,7 @@ #include "cm2xxx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "sram.h" #include "pm.h" #include "control.h" #include "powerdomain.h" diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index a9b8da1629bf..7be3622cfc85 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -28,19 +28,17 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/omap-dma.h> #include <linux/platform_data/gpio-omap.h> #include <trace/events/power.h> +#include <asm/fncpy.h> #include <asm/suspend.h> #include <asm/system_misc.h> #include "clockdomain.h" #include "powerdomain.h" -#include <plat-omap/dma-omap.h> - -#include "../plat-omap/sram.h" - #include "soc.h" #include "common.h" #include "cm3xxx.h" @@ -50,6 +48,7 @@ #include "prm3xxx.h" #include "pm.h" #include "sdrc.h" +#include "sram.h" #include "control.h" /* pm34xx errata defined in pm.h */ diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index a1a266ce90da..ac25ae6667cf 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -114,16 +114,25 @@ struct prm_reset_src_map { /** * struct prm_ll_data - fn ptrs to per-SoC PRM function implementations - * @read_reset_sources: ptr to the Soc PRM-specific get_reset_source impl + * @read_reset_sources: ptr to the SoC PRM-specific get_reset_source impl + * @was_any_context_lost_old: ptr to the SoC PRM context loss test fn + * @clear_context_loss_flags_old: ptr to the SoC PRM context loss flag clear fn + * + * XXX @was_any_context_lost_old and @clear_context_loss_flags_old are + * deprecated. */ struct prm_ll_data { u32 (*read_reset_sources)(void); + bool (*was_any_context_lost_old)(u8 part, s16 inst, u16 idx); + void (*clear_context_loss_flags_old)(u8 part, s16 inst, u16 idx); }; extern int prm_register(struct prm_ll_data *pld); extern int prm_unregister(struct prm_ll_data *pld); extern u32 prm_read_reset_sources(void); +extern bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx); +extern void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx); #endif diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c index bf24fc47603b..faeab18696df 100644 --- a/arch/arm/mach-omap2/prm2xxx.c +++ b/arch/arm/mach-omap2/prm2xxx.c @@ -118,14 +118,13 @@ static struct prm_ll_data omap2xxx_prm_ll_data = { .read_reset_sources = &omap2xxx_prm_read_reset_sources, }; -static int __init omap2xxx_prm_init(void) +int __init omap2xxx_prm_init(void) { if (!cpu_is_omap24xx()) return 0; return prm_register(&omap2xxx_prm_ll_data); } -subsys_initcall(omap2xxx_prm_init); static void __exit omap2xxx_prm_exit(void) { diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h index fe8a14f190ab..3194dd87e0e4 100644 --- a/arch/arm/mach-omap2/prm2xxx.h +++ b/arch/arm/mach-omap2/prm2xxx.h @@ -126,8 +126,7 @@ extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm); extern void omap2xxx_prm_dpll_reset(void); -extern int __init prm2xxx_init(void); -extern int __exit prm2xxx_exit(void); +extern int __init omap2xxx_prm_init(void); #endif diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c index 53ec9cbaa3d3..1ac73883f891 100644 --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -19,8 +19,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "../plat-omap/common.h" - #include "common.h" #include "powerdomain.h" #include "prm33xx.h" diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index b86116cf0db9..db198d058584 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -383,27 +383,30 @@ static struct prm_ll_data omap3xxx_prm_ll_data = { .read_reset_sources = &omap3xxx_prm_read_reset_sources, }; -static int __init omap3xxx_prm_init(void) +int __init omap3xxx_prm_init(void) +{ + if (!cpu_is_omap34xx()) + return 0; + + return prm_register(&omap3xxx_prm_ll_data); +} + +static int __init omap3xxx_prm_late_init(void) { int ret; if (!cpu_is_omap34xx()) return 0; - ret = prm_register(&omap3xxx_prm_ll_data); - if (ret) - return ret; - omap3xxx_prm_enable_io_wakeup(); ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); if (!ret) irq_set_status_flags(omap_prcm_event_to_irq("io"), IRQ_NOAUTOEN); - return ret; } -subsys_initcall(omap3xxx_prm_init); +subsys_initcall(omap3xxx_prm_late_init); static void __exit omap3xxx_prm_exit(void) { diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h index 10cd41a8129e..277f71794e61 100644 --- a/arch/arm/mach-omap2/prm3xxx.h +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -154,6 +154,7 @@ extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); extern void omap3xxx_prm_dpll3_reset(void); +extern int __init omap3xxx_prm_init(void); extern u32 omap3xxx_prm_get_reset_sources(void); #endif /* __ASSEMBLER */ diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 6d3467af205d..7498bc77fe8b 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -346,6 +346,37 @@ static u32 omap44xx_prm_read_reset_sources(void) return r; } +/** + * omap44xx_prm_was_any_context_lost_old - was module hardware context lost? + * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION) + * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST) + * @idx: CONTEXT register offset + * + * Return 1 if any bits were set in the *_CONTEXT_* register + * identified by (@part, @inst, @idx), which means that some context + * was lost for that module; otherwise, return 0. + */ +static bool omap44xx_prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx) +{ + return (omap4_prminst_read_inst_reg(part, inst, idx)) ? 1 : 0; +} + +/** + * omap44xx_prm_clear_context_lost_flags_old - clear context loss flags + * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION) + * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST) + * @idx: CONTEXT register offset + * + * Clear hardware context loss bits for the module identified by + * (@part, @inst, @idx). No return value. XXX Writes to reserved bits; + * is there a way to avoid this? + */ +static void omap44xx_prm_clear_context_loss_flags_old(u8 part, s16 inst, + u16 idx) +{ + omap4_prminst_write_inst_reg(0xffffffff, part, inst, idx); +} + /* Powerdomain low-level functions */ static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) @@ -613,24 +644,28 @@ struct pwrdm_ops omap4_pwrdm_operations = { */ static struct prm_ll_data omap44xx_prm_ll_data = { .read_reset_sources = &omap44xx_prm_read_reset_sources, + .was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old, + .clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old, }; -static int __init omap44xx_prm_init(void) +int __init omap44xx_prm_init(void) { - int ret; - if (!cpu_is_omap44xx()) return 0; - ret = prm_register(&omap44xx_prm_ll_data); - if (ret) - return ret; + return prm_register(&omap44xx_prm_ll_data); +} + +static int __init omap44xx_prm_late_init(void) +{ + if (!cpu_is_omap44xx()) + return 0; omap44xx_prm_enable_io_wakeup(); return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); } -subsys_initcall(omap44xx_prm_init); +subsys_initcall(omap44xx_prm_late_init); static void __exit omap44xx_prm_exit(void) { diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index c8e1accdc90e..22b0979206ca 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -771,6 +771,7 @@ extern void omap44xx_prm_ocp_barrier(void); extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask); extern void omap44xx_prm_restore_irqen(u32 *saved_mask); +extern int __init omap44xx_prm_init(void); extern u32 omap44xx_prm_get_reset_sources(void); # endif diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index d2e0798a4c82..228b850e632f 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -24,8 +24,6 @@ #include <linux/interrupt.h> #include <linux/slab.h> -#include "../plat-omap/common.h" - #include "prm2xxx_3xxx.h" #include "prm2xxx.h" #include "prm3xxx.h" @@ -367,6 +365,51 @@ u32 prm_read_reset_sources(void) } /** + * prm_was_any_context_lost_old - was device context lost? (old API) + * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION) + * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST) + * @idx: CONTEXT register offset + * + * Return 1 if any bits were set in the *_CONTEXT_* register + * identified by (@part, @inst, @idx), which means that some context + * was lost for that module; otherwise, return 0. XXX Deprecated; + * callers need to use a less-SoC-dependent way to identify hardware + * IP blocks. + */ +bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx) +{ + bool ret = true; + + if (prm_ll_data->was_any_context_lost_old) + ret = prm_ll_data->was_any_context_lost_old(part, inst, idx); + else + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + + return ret; +} + +/** + * prm_clear_context_lost_flags_old - clear context loss flags (old API) + * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION) + * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST) + * @idx: CONTEXT register offset + * + * Clear hardware context loss bits for the module identified by + * (@part, @inst, @idx). No return value. XXX Deprecated; callers + * need to use a less-SoC-dependent way to identify hardware IP + * blocks. + */ +void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx) +{ + if (prm_ll_data->clear_context_loss_flags_old) + prm_ll_data->clear_context_loss_flags_old(part, inst, idx); + else + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); +} + +/** * prm_register - register per-SoC low-level data with the PRM * @pld: low-level per-SoC OMAP PRM data & function pointers to register * diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 3ed0d62333c5..dae7e4804a48 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -23,8 +23,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include "../plat-omap/sram.h" - #include "common.h" #include "clock.h" #include "sdrc.h" diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 26c1728e09ca..907291714643 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -24,14 +24,13 @@ #include <linux/clk.h> #include <linux/io.h> -#include "../plat-omap/sram.h" - #include "soc.h" #include "iomap.h" #include "common.h" #include "prm2xxx.h" #include "clock.h" #include "sdrc.h" +#include "sram.h" /* Memory timing, DLL mode flags */ #define M_DDR 1 diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index aa30a3c20883..93d102535c85 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -26,9 +26,9 @@ #include <linux/slab.h> #include <linux/pm_runtime.h> #include <linux/console.h> +#include <linux/omap-dma.h> #include <plat/omap-serial.h> -#include <plat-omap/dma-omap.h> #include "common.h" #include "omap_hwmod.h" diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h index 6a6806271fcf..c4014f013df0 100644 --- a/arch/arm/mach-omap2/serial.h +++ b/arch/arm/mach-omap2/serial.h @@ -1,112 +1 @@ -/* - * arch/arm/plat-omap/include/mach/serial.h - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -#include <linux/init.h> - -/* - * Memory entry used for the DEBUG_LL UART configuration, relative to - * start of RAM. See also uncompress.h and debug-macro.S. - * - * Note that using a memory location for storing the UART configuration - * has at least two limitations: - * - * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the - * uncompress code could then partially overwrite itself - * 2. We assume printascii is called at least once before paging_init, - * and addruart has a chance to read OMAP_UART_INFO - */ -#define OMAP_UART_INFO_OFS 0x3ffc - -/* OMAP2 serial ports */ -#define OMAP2_UART1_BASE 0x4806a000 -#define OMAP2_UART2_BASE 0x4806c000 -#define OMAP2_UART3_BASE 0x4806e000 - -/* OMAP3 serial ports */ -#define OMAP3_UART1_BASE OMAP2_UART1_BASE -#define OMAP3_UART2_BASE OMAP2_UART2_BASE -#define OMAP3_UART3_BASE 0x49020000 -#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */ -#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */ - -/* OMAP4 serial ports */ -#define OMAP4_UART1_BASE OMAP2_UART1_BASE -#define OMAP4_UART2_BASE OMAP2_UART2_BASE -#define OMAP4_UART3_BASE 0x48020000 -#define OMAP4_UART4_BASE 0x4806e000 - -/* TI81XX serial ports */ -#define TI81XX_UART1_BASE 0x48020000 -#define TI81XX_UART2_BASE 0x48022000 -#define TI81XX_UART3_BASE 0x48024000 - -/* AM3505/3517 UART4 */ -#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ - -/* AM33XX serial port */ -#define AM33XX_UART1_BASE 0x44E09000 - -/* OMAP5 serial ports */ -#define OMAP5_UART1_BASE OMAP2_UART1_BASE -#define OMAP5_UART2_BASE OMAP2_UART2_BASE -#define OMAP5_UART3_BASE OMAP4_UART3_BASE -#define OMAP5_UART4_BASE OMAP4_UART4_BASE -#define OMAP5_UART5_BASE 0x48066000 -#define OMAP5_UART6_BASE 0x48068000 - -/* External port on Zoom2/3 */ -#define ZOOM_UART_BASE 0x10000000 -#define ZOOM_UART_VIRT 0xfa400000 - -#define OMAP_PORT_SHIFT 2 -#define ZOOM_PORT_SHIFT 1 - -#define OMAP24XX_BASE_BAUD (48000000/16) - -/* - * DEBUG_LL port encoding stored into the UART1 scratchpad register by - * decomp_setup in uncompress.h - */ -#define OMAP2UART1 21 -#define OMAP2UART2 22 -#define OMAP2UART3 23 -#define OMAP3UART1 OMAP2UART1 -#define OMAP3UART2 OMAP2UART2 -#define OMAP3UART3 33 -#define OMAP3UART4 34 /* Only on 36xx */ -#define OMAP4UART1 OMAP2UART1 -#define OMAP4UART2 OMAP2UART2 -#define OMAP4UART3 43 -#define OMAP4UART4 44 -#define TI81XXUART1 81 -#define TI81XXUART2 82 -#define TI81XXUART3 83 -#define AM33XXUART1 84 -#define OMAP5UART3 OMAP4UART3 -#define OMAP5UART4 OMAP4UART4 -#define ZOOM_UART 95 /* Only on zoom2/3 */ - -#ifndef __ASSEMBLER__ - -struct omap_board_data; -struct omap_uart_port_info; - -extern void omap_serial_init(void); -extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); -extern void omap_serial_init_port(struct omap_board_data *bdata, - struct omap_uart_port_info *platform_data); -#endif - -#endif +#include <mach/serial.h> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 474dba7263e3..d1dedc8195ed 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -26,13 +26,12 @@ #include <asm/assembler.h> -#include "../plat-omap/sram.h" - #include "omap34xx.h" #include "iomap.h" #include "cm3xxx.h" #include "prm3xxx.h" #include "sdrc.h" +#include "sram.h" #include "control.h" /* diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 070096496e20..f31d90774de0 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -435,9 +435,7 @@ extern u32 omap_features; #define OMAP3_HAS_IO_WAKEUP BIT(6) #define OMAP3_HAS_SDRC BIT(7) #define OMAP3_HAS_IO_CHAIN_CTRL BIT(8) -#define OMAP4_HAS_MPU_1GHZ BIT(9) -#define OMAP4_HAS_MPU_1_2GHZ BIT(10) -#define OMAP4_HAS_MPU_1_5GHZ BIT(11) +#define OMAP4_HAS_PERF_SILICON BIT(9) #define OMAP3_HAS_FEATURE(feat,flag) \ @@ -465,9 +463,7 @@ static inline unsigned int omap4_has_ ##feat(void) \ return omap_features & OMAP4_HAS_ ##flag; \ } \ -OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ) -OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ) -OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ) +OMAP4_HAS_FEATURE(perf_silicon, PERF_SILICON) #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c new file mode 100644 index 000000000000..0ff0f068bea8 --- /dev/null +++ b/arch/arm/mach-omap2/sram.c @@ -0,0 +1,305 @@ +/* + * + * OMAP SRAM detection and management + * + * Copyright (C) 2005 Nokia Corporation + * Written by Tony Lindgren <tony@atomide.com> + * + * Copyright (C) 2009-2012 Texas Instruments + * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/fncpy.h> +#include <asm/tlb.h> +#include <asm/cacheflush.h> + +#include <asm/mach/map.h> + +#include "soc.h" +#include "iomap.h" +#include "prm2xxx_3xxx.h" +#include "sdrc.h" +#include "sram.h" + +#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) +#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) +#ifdef CONFIG_OMAP4_ERRATA_I688 +#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA +#else +#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) +#endif +#define OMAP5_SRAM_PA 0x40300000 + +#define SRAM_BOOTLOADER_SZ 0x00 + +#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) +#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) +#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) + +#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) +#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) +#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) +#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) +#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) + +#define GP_DEVICE 0x300 + +#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) + +static unsigned long omap_sram_start; +static unsigned long omap_sram_skip; +static unsigned long omap_sram_size; + +/* + * Depending on the target RAMFS firewall setup, the public usable amount of + * SRAM varies. The default accessible size for all device types is 2k. A GP + * device allows ARM11 but not other initiators for full size. This + * functionality seems ok until some nice security API happens. + */ +static int is_sram_locked(void) +{ + if (OMAP2_DEVICE_TYPE_GP == omap_type()) { + /* RAMFW: R/W access to all initiators for all qualifier sets */ + if (cpu_is_omap242x()) { + __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ + __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ + __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ + } + if (cpu_is_omap34xx()) { + __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ + __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ + __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ + __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); + __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); + } + return 0; + } else + return 1; /* assume locked with no PPA or security driver */ +} + +/* + * The amount of SRAM depends on the core type. + * Note that we cannot try to test for SRAM here because writes + * to secure SRAM will hang the system. Also the SRAM is not + * yet mapped at this point. + */ +static void __init omap_detect_sram(void) +{ + omap_sram_skip = SRAM_BOOTLOADER_SZ; + if (is_sram_locked()) { + if (cpu_is_omap34xx()) { + omap_sram_start = OMAP3_SRAM_PUB_PA; + if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || + (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { + omap_sram_size = 0x7000; /* 28K */ + omap_sram_skip += SZ_16K; + } else { + omap_sram_size = 0x8000; /* 32K */ + } + } else if (cpu_is_omap44xx()) { + omap_sram_start = OMAP4_SRAM_PUB_PA; + omap_sram_size = 0xa000; /* 40K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ + } else { + omap_sram_start = OMAP2_SRAM_PUB_PA; + omap_sram_size = 0x800; /* 2K */ + } + } else { + if (soc_is_am33xx()) { + omap_sram_start = AM33XX_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap34xx()) { + omap_sram_start = OMAP3_SRAM_PA; + omap_sram_size = 0x10000; /* 64K */ + } else if (cpu_is_omap44xx()) { + omap_sram_start = OMAP4_SRAM_PA; + omap_sram_size = 0xe000; /* 56K */ + } else if (soc_is_omap54xx()) { + omap_sram_start = OMAP5_SRAM_PA; + omap_sram_size = SZ_128K; /* 128KB */ + } else { + omap_sram_start = OMAP2_SRAM_PA; + if (cpu_is_omap242x()) + omap_sram_size = 0xa0000; /* 640K */ + else if (cpu_is_omap243x()) + omap_sram_size = 0x10000; /* 64K */ + } + } +} + +/* + * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. + */ +static void __init omap2_map_sram(void) +{ + int cached = 1; + +#ifdef CONFIG_OMAP4_ERRATA_I688 + if (cpu_is_omap44xx()) { + omap_sram_start += PAGE_SIZE; + omap_sram_size -= SZ_16K; + } +#endif + if (cpu_is_omap34xx()) { + /* + * SRAM must be marked as non-cached on OMAP3 since the + * CORE DPLL M2 divider change code (in SRAM) runs with the + * SDRAM controller disabled, and if it is marked cached, + * the ARM may attempt to write cache lines back to SDRAM + * which will cause the system to hang. + */ + cached = 0; + } + + omap_map_sram(omap_sram_start, omap_sram_size, + omap_sram_skip, cached); +} + +static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock); + +void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock) +{ + BUG_ON(!_omap2_sram_ddr_init); + _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, + base_cs, force_unlock); +} + +static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, + u32 mem_type); + +void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) +{ + BUG_ON(!_omap2_sram_reprogram_sdrc); + _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); +} + +static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); + +u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) +{ + BUG_ON(!_omap2_set_prcm); + return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); +} + +#ifdef CONFIG_SOC_OMAP2420 +static int __init omap242x_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, + omap242x_sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc, + omap242x_sram_reprogram_sdrc_sz); + + _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm, + omap242x_sram_set_prcm_sz); + + return 0; +} +#else +static inline int omap242x_sram_init(void) +{ + return 0; +} +#endif + +#ifdef CONFIG_SOC_OMAP2430 +static int __init omap243x_sram_init(void) +{ + _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, + omap243x_sram_ddr_init_sz); + + _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc, + omap243x_sram_reprogram_sdrc_sz); + + _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm, + omap243x_sram_set_prcm_sz); + + return 0; +} +#else +static inline int omap243x_sram_init(void) +{ + return 0; +} +#endif + +#ifdef CONFIG_ARCH_OMAP3 + +static u32 (*_omap3_sram_configure_core_dpll)( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); + +u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) +{ + BUG_ON(!_omap3_sram_configure_core_dpll); + return _omap3_sram_configure_core_dpll( + m2, unlock_dll, f, inc, + sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, + sdrc_actim_ctrl_b_0, sdrc_mr_0, + sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, + sdrc_actim_ctrl_b_1, sdrc_mr_1); +} + +void omap3_sram_restore_context(void) +{ + omap_sram_reset(); + + _omap3_sram_configure_core_dpll = + omap_sram_push(omap3_sram_configure_core_dpll, + omap3_sram_configure_core_dpll_sz); + omap_push_sram_idle(); +} + +static inline int omap34xx_sram_init(void) +{ + omap3_sram_restore_context(); + return 0; +} +#else +static inline int omap34xx_sram_init(void) +{ + return 0; +} +#endif /* CONFIG_ARCH_OMAP3 */ + +static inline int am33xx_sram_init(void) +{ + return 0; +} + +int __init omap_sram_init(void) +{ + omap_detect_sram(); + omap2_map_sram(); + + if (cpu_is_omap242x()) + omap242x_sram_init(); + else if (cpu_is_omap2430()) + omap243x_sram_init(); + else if (soc_is_am33xx()) + am33xx_sram_init(); + else if (cpu_is_omap34xx()) + omap34xx_sram_init(); + + return 0; +} diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/mach-omap2/sram.h index cefda2e09869..ca7277c2a9ee 100644 --- a/arch/arm/plat-omap/sram.h +++ b/arch/arm/mach-omap2/sram.h @@ -1,6 +1,4 @@ /* - * arch/arm/plat-omap/include/mach/sram.h - * * Interface for functions that need to be run in internal SRAM * * This program is free software; you can redistribute it and/or modify @@ -8,26 +6,8 @@ * published by the Free Software Foundation. */ -#ifndef __ARCH_ARM_OMAP_SRAM_H -#define __ARCH_ARM_OMAP_SRAM_H - #ifndef __ASSEMBLY__ -#include <asm/fncpy.h> - -int __init omap_sram_init(void); - -extern void *omap_sram_push_address(unsigned long size); - -/* Macro to push a function to the internal SRAM, using the fncpy API */ -#define omap_sram_push(funcp, size) ({ \ - typeof(&(funcp)) _res = NULL; \ - void *_sram_address = omap_sram_push_address(size); \ - if (_sram_address) \ - _res = fncpy(_sram_address, &(funcp), size); \ - _res; \ -}) - -extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); +#include <plat/sram.h> extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, u32 base_cs, u32 force_unlock); @@ -44,9 +24,6 @@ extern u32 omap3_configure_core_dpll( extern void omap3_sram_restore_context(void); /* Do not use these */ -extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap1_sram_reprogram_clock_sz; - extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); extern unsigned long omap24xx_sram_reprogram_clock_sz; @@ -104,4 +81,3 @@ static inline void omap_push_sram_idle(void) {} #define OMAP4_SRAM_PA 0x40300000 #endif #define AM33XX_SRAM_PA 0x40300000 -#endif diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 565e5755c9bc..b9cff72ceaec 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -37,6 +37,10 @@ #include <linux/clockchips.h> #include <linux/slab.h> #include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/platform_data/dmtimer-omap.h> #include <asm/mach/time.h> #include <asm/smp_twd.h> @@ -45,6 +49,7 @@ #include <asm/arch_timer.h> #include "omap_hwmod.h" #include "omap_device.h" +#include <plat/counter-32k.h> #include <plat/dmtimer.h> #include "omap-pm.h" @@ -61,18 +66,6 @@ #define OMAP3_32K_SOURCE "omap_32k_fck" #define OMAP4_32K_SOURCE "sys_32k_ck" -#ifdef CONFIG_OMAP_32K_TIMER -#define OMAP2_CLKEV_SOURCE OMAP2_32K_SOURCE -#define OMAP3_CLKEV_SOURCE OMAP3_32K_SOURCE -#define OMAP4_CLKEV_SOURCE OMAP4_32K_SOURCE -#define OMAP3_SECURE_TIMER 12 -#else -#define OMAP2_CLKEV_SOURCE OMAP2_MPU_SOURCE -#define OMAP3_CLKEV_SOURCE OMAP3_MPU_SOURCE -#define OMAP4_CLKEV_SOURCE OMAP4_MPU_SOURCE -#define OMAP3_SECURE_TIMER 1 -#endif - #define REALTIME_COUNTER_BASE 0x48243200 #define INCREMENTER_NUMERATOR_OFFSET 0x10 #define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14 @@ -103,7 +96,7 @@ static int omap2_gp_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) { __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST, - 0xffffffff - cycles, 1); + 0xffffffff - cycles, OMAP_TIMER_POSTED); return 0; } @@ -113,7 +106,7 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, { u32 period; - __omap_dm_timer_stop(&clkev, 1, clkev.rate); + __omap_dm_timer_stop(&clkev, OMAP_TIMER_POSTED, clkev.rate); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: @@ -121,10 +114,10 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, period -= 1; /* Looks like we need to first set the load value separately */ __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG, - 0xffffffff - period, 1); + 0xffffffff - period, OMAP_TIMER_POSTED); __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, - 0xffffffff - period, 1); + 0xffffffff - period, OMAP_TIMER_POSTED); break; case CLOCK_EVT_MODE_ONESHOT: break; @@ -144,36 +137,144 @@ static struct clock_event_device clockevent_gpt = { .set_mode = omap2_gp_timer_set_mode, }; +static struct property device_disabled = { + .name = "status", + .length = sizeof("disabled"), + .value = "disabled", +}; + +static struct of_device_id omap_timer_match[] __initdata = { + { .compatible = "ti,omap2-timer", }, + { } +}; + +/** + * omap_get_timer_dt - get a timer using device-tree + * @match - device-tree match structure for matching a device type + * @property - optional timer property to match + * + * Helper function to get a timer during early boot using device-tree for use + * as kernel system timer. Optionally, the property argument can be used to + * select a timer with a specific property. Once a timer is found then mark + * the timer node in device-tree as disabled, to prevent the kernel from + * registering this timer as a platform device and so no one else can use it. + */ +static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, + const char *property) +{ + struct device_node *np; + + for_each_matching_node(np, match) { + if (!of_device_is_available(np)) { + of_node_put(np); + continue; + } + + if (property && !of_get_property(np, property, NULL)) { + of_node_put(np); + continue; + } + + prom_add_property(np, &device_disabled); + return np; + } + + return NULL; +} + +/** + * omap_dmtimer_init - initialisation function when device tree is used + * + * For secure OMAP3 devices, timers with device type "timer-secure" cannot + * be used by the kernel as they are reserved. Therefore, to prevent the + * kernel registering these devices remove them dynamically from the device + * tree on boot. + */ +void __init omap_dmtimer_init(void) +{ + struct device_node *np; + + if (!cpu_is_omap34xx()) + return; + + /* If we are a secure device, remove any secure timer nodes */ + if ((omap_type() != OMAP2_DEVICE_TYPE_GP)) { + np = omap_get_timer_dt(omap_timer_match, "ti,timer-secure"); + if (np) + of_node_put(np); + } +} + +/** + * omap_dm_timer_get_errata - get errata flags for a timer + * + * Get the timer errata flags that are specific to the OMAP device being used. + */ +u32 __init omap_dm_timer_get_errata(void) +{ + if (cpu_is_omap24xx()) + return 0; + + return OMAP_TIMER_ERRATA_I103_I767; +} + static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property, + int posted) { char name[10]; /* 10 = sizeof("gptXX_Xck0") */ + const char *oh_name; + struct device_node *np; struct omap_hwmod *oh; - struct resource irq_rsrc, mem_rsrc; - size_t size; - int res = 0; - int r; - - sprintf(name, "timer%d", gptimer_id); - omap_hwmod_setup_one(name); - oh = omap_hwmod_lookup(name); + struct resource irq, mem; + int r = 0; + + if (of_have_populated_dt()) { + np = omap_get_timer_dt(omap_timer_match, NULL); + if (!np) + return -ENODEV; + + of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); + if (!oh_name) + return -ENODEV; + + timer->irq = irq_of_parse_and_map(np, 0); + if (!timer->irq) + return -ENXIO; + + timer->io_base = of_iomap(np, 0); + + of_node_put(np); + } else { + if (omap_dm_timer_reserve_systimer(gptimer_id)) + return -ENODEV; + + sprintf(name, "timer%d", gptimer_id); + oh_name = name; + } + + oh = omap_hwmod_lookup(oh_name); if (!oh) return -ENODEV; - r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq_rsrc); - if (r) - return -ENXIO; - timer->irq = irq_rsrc.start; + if (!of_have_populated_dt()) { + r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, + &irq); + if (r) + return -ENXIO; + timer->irq = irq.start; - r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, &mem_rsrc); - if (r) - return -ENXIO; - timer->phys_base = mem_rsrc.start; - size = mem_rsrc.end - mem_rsrc.start; + r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, + &mem); + if (r) + return -ENXIO; + + /* Static mapping, never released */ + timer->io_base = ioremap(mem.start, mem.end - mem.start); + } - /* Static mapping, never released */ - timer->io_base = ioremap(timer->phys_base, size); if (!timer->io_base) return -ENXIO; @@ -182,42 +283,56 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (IS_ERR(timer->fclk)) return -ENODEV; - omap_hwmod_enable(oh); - - if (omap_dm_timer_reserve_systimer(gptimer_id)) - return -ENODEV; - + /* FIXME: Need to remove hard-coded test on timer ID */ if (gptimer_id != 12) { struct clk *src; src = clk_get(NULL, fck_source); if (IS_ERR(src)) { - res = -EINVAL; + r = -EINVAL; } else { - res = __omap_dm_timer_set_source(timer->fclk, src); - if (IS_ERR_VALUE(res)) - pr_warning("%s: timer%i cannot set source\n", - __func__, gptimer_id); + r = clk_set_parent(timer->fclk, src); + if (IS_ERR_VALUE(r)) + pr_warn("%s: %s cannot set source\n", + __func__, oh->name); clk_put(src); } } + + omap_hwmod_setup_one(oh_name); + omap_hwmod_enable(oh); __omap_dm_timer_init_regs(timer); - __omap_dm_timer_reset(timer, 1, 1); - timer->posted = 1; - timer->rate = clk_get_rate(timer->fclk); + if (posted) + __omap_dm_timer_enable_posted(timer); + + /* Check that the intended posted configuration matches the actual */ + if (posted != timer->posted) + return -EINVAL; + timer->rate = clk_get_rate(timer->fclk); timer->reserved = 1; - return res; + return r; } static void __init omap2_gp_clockevent_init(int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property) { int res; - res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source); + clkev.errata = omap_dm_timer_get_errata(); + + /* + * For clock-event timers we never read the timer counter and + * so we are not impacted by errata i103 and i767. Therefore, + * we can safely ignore this errata for clock-event timers. + */ + __omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767); + + res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property, + OMAP_TIMER_POSTED); BUG_ON(res); omap2_gp_timer_irq.dev_id = &clkev; @@ -250,7 +365,8 @@ static bool use_gptimer_clksrc; */ static cycle_t clocksource_read_cycles(struct clocksource *cs) { - return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1); + return (cycle_t)__omap_dm_timer_read_counter(&clksrc, + OMAP_TIMER_NONPOSTED); } static struct clocksource clocksource_gpt = { @@ -264,21 +380,41 @@ static struct clocksource clocksource_gpt = { static u32 notrace dmtimer_read_sched_clock(void) { if (clksrc.reserved) - return __omap_dm_timer_read_counter(&clksrc, 1); + return __omap_dm_timer_read_counter(&clksrc, + OMAP_TIMER_NONPOSTED); return 0; } -#ifdef CONFIG_OMAP_32K_TIMER +static struct of_device_id omap_counter_match[] __initdata = { + { .compatible = "ti,omap-counter32k", }, + { } +}; + /* Setup free-running counter for clocksource */ static int __init omap2_sync32k_clocksource_init(void) { int ret; + struct device_node *np = NULL; struct omap_hwmod *oh; void __iomem *vbase; const char *oh_name = "counter_32k"; /* + * If device-tree is present, then search the DT blob + * to see if the 32kHz counter is supported. + */ + if (of_have_populated_dt()) { + np = omap_get_timer_dt(omap_counter_match, NULL); + if (!np) + return -ENODEV; + + of_property_read_string_index(np, "ti,hwmods", 0, &oh_name); + if (!oh_name) + return -ENODEV; + } + + /* * First check hwmod data is available for sync32k counter */ oh = omap_hwmod_lookup(oh_name); @@ -287,7 +423,13 @@ static int __init omap2_sync32k_clocksource_init(void) omap_hwmod_setup_one(oh_name); - vbase = omap_hwmod_get_mpu_rt_va(oh); + if (np) { + vbase = of_iomap(np, 0); + of_node_put(np); + } else { + vbase = omap_hwmod_get_mpu_rt_va(oh); + } + if (!vbase) { pr_warn("%s: failed to get counter_32k resource\n", __func__); return -ENXIO; @@ -309,23 +451,21 @@ static int __init omap2_sync32k_clocksource_init(void) return ret; } -#else -static inline int omap2_sync32k_clocksource_init(void) -{ - return -ENODEV; -} -#endif static void __init omap2_gptimer_clocksource_init(int gptimer_id, const char *fck_source) { int res; - res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source); + clksrc.errata = omap_dm_timer_get_errata(); + + res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL, + OMAP_TIMER_NONPOSTED); BUG_ON(res); __omap_dm_timer_load_start(&clksrc, - OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1); + OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, + OMAP_TIMER_NONPOSTED); setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate); if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) @@ -336,25 +476,6 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, gptimer_id, clksrc.rate); } -static void __init omap2_clocksource_init(int gptimer_id, - const char *fck_source) -{ - /* - * First give preference to kernel parameter configuration - * by user (clocksource="gp_timer"). - * - * In case of missing kernel parameter for clocksource, - * first check for availability for 32k-sync timer, in case - * of failure in finding 32k_counter module or registering - * it as clocksource, execution will fallback to gp-timer. - */ - if (use_gptimer_clksrc == true) - omap2_gptimer_clocksource_init(gptimer_id, fck_source); - else if (omap2_sync32k_clocksource_init()) - /* Fall back to gp-timer code */ - omap2_gptimer_clocksource_init(gptimer_id, fck_source); -} - #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER /* * The realtime counter also called master counter, is a free-running @@ -433,48 +554,65 @@ static inline void __init realtime_counter_init(void) {} #endif -#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, \ +#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ + clksrc_nr, clksrc_src) \ +static void __init omap##name##_gptimer_timer_init(void) \ +{ \ + omap_dmtimer_init(); \ + omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \ +} + +#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ clksrc_nr, clksrc_src) \ -static void __init omap##name##_timer_init(void) \ +static void __init omap##name##_sync32k_timer_init(void) \ { \ - omap2_gp_clockevent_init((clkev_nr), clkev_src); \ - omap2_clocksource_init((clksrc_nr), clksrc_src); \ + omap_dmtimer_init(); \ + omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ + /* Enable the use of clocksource="gp_timer" kernel parameter */ \ + if (use_gptimer_clksrc) \ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);\ + else \ + omap2_sync32k_clocksource_init(); \ } -#define OMAP_SYS_TIMER(name) \ +#define OMAP_SYS_TIMER(name, clksrc) \ struct sys_timer omap##name##_timer = { \ - .init = omap##name##_timer_init, \ + .init = omap##name##_##clksrc##_timer_init, \ }; #ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, 2, OMAP2_MPU_SOURCE) -OMAP_SYS_TIMER(2) -#endif +OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon", + 2, OMAP2_MPU_SOURCE); +OMAP_SYS_TIMER(2, sync32k); +#endif /* CONFIG_ARCH_OMAP2 */ #ifdef CONFIG_ARCH_OMAP3 -OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, 2, OMAP3_MPU_SOURCE) -OMAP_SYS_TIMER(3) -OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE, - 2, OMAP3_MPU_SOURCE) -OMAP_SYS_TIMER(3_secure) -#endif +OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon", + 2, OMAP3_MPU_SOURCE); +OMAP_SYS_TIMER(3, sync32k); +OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure", + 2, OMAP3_MPU_SOURCE); +OMAP_SYS_TIMER(3_secure, sync32k); +OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon", + 2, OMAP3_MPU_SOURCE); +OMAP_SYS_TIMER(3_gp, gptimer); +#endif /* CONFIG_ARCH_OMAP3 */ #ifdef CONFIG_SOC_AM33XX -OMAP_SYS_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, 2, OMAP4_MPU_SOURCE) -OMAP_SYS_TIMER(3_am33xx) -#endif +OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon", + 2, OMAP4_MPU_SOURCE); +OMAP_SYS_TIMER(3_am33xx, gptimer); +#endif /* CONFIG_SOC_AM33XX */ #ifdef CONFIG_ARCH_OMAP4 +OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", + 2, OMAP4_MPU_SOURCE); #ifdef CONFIG_LOCAL_TIMERS -static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, - OMAP44XX_LOCAL_TWD_BASE, 29); -#endif - -static void __init omap4_timer_init(void) +static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29); +static void __init omap4_local_timer_init(void) { - omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); - omap2_clocksource_init(2, OMAP4_MPU_SOURCE); -#ifdef CONFIG_LOCAL_TIMERS + omap4_sync32k_timer_init(); /* Local timers are not supprted on OMAP4430 ES1.0 */ if (omap_rev() != OMAP4430_REV_ES1_0) { int err; @@ -488,26 +626,32 @@ static void __init omap4_timer_init(void) if (err) pr_err("twd_local_timer_register failed %d\n", err); } -#endif } -OMAP_SYS_TIMER(4) -#endif +#else /* CONFIG_LOCAL_TIMERS */ +static inline void omap4_local_timer_init(void) +{ + omap4_sync32_timer_init(); +} +#endif /* CONFIG_LOCAL_TIMERS */ +OMAP_SYS_TIMER(4, local); +#endif /* CONFIG_ARCH_OMAP4 */ #ifdef CONFIG_SOC_OMAP5 -static void __init omap5_timer_init(void) +OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", + 2, OMAP4_MPU_SOURCE); +static void __init omap5_realtime_timer_init(void) { int err; - omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); - omap2_clocksource_init(2, OMAP4_MPU_SOURCE); + omap5_sync32k_timer_init(); realtime_counter_init(); err = arch_timer_of_register(); if (err) pr_err("%s: arch_timer_register failed %d\n", __func__, err); } -OMAP_SYS_TIMER(5) -#endif +OMAP_SYS_TIMER(5, realtime); +#endif /* CONFIG_SOC_OMAP5 */ /** * omap_timer_init - build and register timer device with an @@ -559,6 +703,9 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) if (timer_dev_attr) pdata->timer_capability = timer_dev_attr->timer_capability; + pdata->timer_errata = omap_dm_timer_get_errata(); + pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; + pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata), NULL, 0, 0); @@ -583,6 +730,10 @@ static int __init omap2_dm_timer_init(void) { int ret; + /* If dtb is there, the devices will be created dynamically */ + if (of_have_populated_dt()) + return -ENODEV; + ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL); if (unlikely(ret)) { pr_err("%s: device registration failed.\n", __func__); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 3fa2bdb44106..e49b40b4c90a 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -70,6 +70,7 @@ void __init omap4_pmic_init(const char *pmic_type, { /* PMIC part*/ omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); + omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT); omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data); /* Register additional devices on i2c1 bus if needed */ diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 0673f0c10432..2cb2f06c20f5 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -2,6 +2,13 @@ if ARCH_ORION5X menu "Orion Implementations" +config ARCH_ORION5X_DT + bool "Marvell Orion5x Flattened Device Tree" + select USE_OF + help + Say 'Y' here if you want your kernel to support the + Marvell Orion5x using flattened device tree. + config MACH_DB88F5281 bool "Marvell Orion-2 Development Board" select I2C_BOARDINFO @@ -96,12 +103,13 @@ config MACH_MV2120 Say 'Y' here if you want your kernel to support the HP Media Vault mv2120 or mv5100. -config MACH_EDMINI_V2 - bool "LaCie Ethernet Disk mini V2" +config MACH_EDMINI_V2_DT + bool "LaCie Ethernet Disk mini V2 (Flattened Device Tree)" select I2C_BOARDINFO + select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the - LaCie Ethernet Disk mini V2. + LaCie Ethernet Disk mini V2 (Flattened Device Tree). config MACH_D2NET bool "LaCie d2 Network" diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 7f18cdacd487..9e809a7c05c0 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o -obj-$(CONFIG_MACH_EDMINI_V2) += edmini_v2-setup.o obj-$(CONFIG_MACH_D2NET) += d2net-setup.o obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o @@ -22,3 +21,6 @@ obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o + +obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o +obj-$(CONFIG_MACH_EDMINI_V2_DT) += edmini_v2-setup.o diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c new file mode 100644 index 000000000000..32e5c211a89b --- /dev/null +++ b/arch/arm/mach-orion5x/board-dt.c @@ -0,0 +1,79 @@ +/* + * Copyright 2012 (C), Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * arch/arm/mach-orion5x/board-dt.c + * + * Flattened Device Tree board initialization + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <asm/system_misc.h> +#include <asm/mach/arch.h> +#include <mach/orion5x.h> +#include <plat/irq.h> +#include "common.h" + +struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", + NULL), + OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), + OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), + OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1090000, "mv_crypto", NULL), + {}, +}; + +static void __init orion5x_dt_init(void) +{ + char *dev_name; + u32 dev, rev; + + orion5x_id(&dev, &rev, &dev_name); + printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); + + /* + * Setup Orion address map + */ + orion5x_setup_cpu_mbus_bridge(); + + /* Setup root of clk tree */ + clk_init(); + + /* + * Don't issue "Wait for Interrupt" instruction if we are + * running on D0 5281 silicon. + */ + if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) { + printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); + disable_hlt(); + } + + if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2")) + edmini_v2_init(); + + of_platform_populate(NULL, of_default_bus_match_table, + orion5x_auxdata_lookup, NULL); +} + +static const char *orion5x_dt_compat[] = { + "marvell,orion5x", + NULL, +}; + +DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)") + /* Maintainer: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */ + .map_io = orion5x_map_io, + .init_early = orion5x_init_early, + .init_irq = orion_dt_init_irq, + .timer = &orion5x_timer, + .init_machine = orion5x_dt_init, + .restart = orion5x_restart, + .dt_compat = orion5x_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index b3eb3da01160..550f92320afb 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -65,7 +65,7 @@ void __init orion5x_map_io(void) ****************************************************************************/ static struct clk *tclk; -static void __init clk_init(void) +void __init clk_init(void) { tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT, orion5x_tclk); @@ -236,7 +236,7 @@ struct sys_timer orion5x_timer = { /* * Identify device ID and rev from PCIe configuration header space '0'. */ -static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) +void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) { orion5x_pcie_id(dev, rev); diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 31bab92ce038..7db5cdd9c4b7 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -12,6 +12,8 @@ void orion5x_map_io(void); void orion5x_init_early(void); void orion5x_init_irq(void); void orion5x_init(void); +void orion5x_id(u32 *dev, u32 *rev, char **dev_name); +void clk_init(void); extern int orion5x_tclk; extern struct sys_timer orion5x_timer; @@ -54,6 +56,13 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +/* board init functions for boards not fully converted to fdt */ +#ifdef CONFIG_MACH_EDMINI_V2_DT +void edmini_v2_init(void); +#else +static inline void edmini_v2_init(void) {}; +#endif + struct meminfo; struct tag; extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *); diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index 355e962137c7..d675e727803d 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -115,69 +115,6 @@ static struct i2c_board_info __initdata edmini_v2_i2c_rtc = { }; /***************************************************************************** - * Sata - ****************************************************************************/ - -static struct mv_sata_platform_data edmini_v2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO LED (simple - doesn't use hardware blinking support) - ****************************************************************************/ - -#define EDMINI_V2_GPIO_LED_POWER 16 - -static struct gpio_led edmini_v2_leds[] = { - { - .name = "power:blue", - .gpio = EDMINI_V2_GPIO_LED_POWER, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data edmini_v2_led_data = { - .num_leds = ARRAY_SIZE(edmini_v2_leds), - .leds = edmini_v2_leds, -}; - -static struct platform_device edmini_v2_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &edmini_v2_led_data, - }, -}; - -/**************************************************************************** - * GPIO key - ****************************************************************************/ - -#define EDMINI_V2_GPIO_KEY_POWER 18 - -static struct gpio_keys_button edmini_v2_buttons[] = { - { - .code = KEY_POWER, - .gpio = EDMINI_V2_GPIO_KEY_POWER, - .desc = "Power Button", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data edmini_v2_button_data = { - .buttons = edmini_v2_buttons, - .nbuttons = ARRAY_SIZE(edmini_v2_buttons), -}; - -static struct platform_device edmini_v2_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &edmini_v2_button_data, - }, -}; - -/***************************************************************************** * General Setup ****************************************************************************/ static unsigned int edminiv2_mpp_modes[] __initdata = { @@ -207,13 +144,8 @@ static unsigned int edminiv2_mpp_modes[] __initdata = { 0, }; -static void __init edmini_v2_init(void) +void __init edmini_v2_init(void) { - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - orion5x_mpp_conf(edminiv2_mpp_modes); /* @@ -221,15 +153,10 @@ static void __init edmini_v2_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&edmini_v2_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&edmini_v2_sata_data); - orion5x_uart0_init(); orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE, EDMINI_V2_NOR_BOOT_SIZE); platform_device_register(&edmini_v2_nor_flash); - platform_device_register(&edmini_v2_gpio_leds); - platform_device_register(&edmini_v2_gpio_buttons); pr_notice("edmini_v2: USB device port, flash write and power-off " "are not yet supported.\n"); @@ -247,16 +174,3 @@ static void __init edmini_v2_init(void) i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1); } - -/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ -MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2") - /* Maintainer: Christopher Moore <moore@free.fr> */ - .atag_offset = 0x100, - .init_machine = edmini_v2_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 11aa7399dc09..86eec4159cbc 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -2,27 +2,6 @@ if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" -config ARCH_PXA_V7 - bool "ARMv7 (PXA95x) based systems" - -if ARCH_PXA_V7 -comment "Marvell Dev Platforms (sorted by hardware release time)" -config MACH_TAVOREVB3 - bool "PXA95x Development Platform (aka TavorEVB III)" - select CPU_PXA955 - -config MACH_SAARB - bool "PXA955 Handheld Platform (aka SAARB)" - select CPU_PXA955 -endif - -config PXA_V7_MACH_AUTO - def_bool y - depends on ARCH_PXA_V7 - depends on !MACH_SAARB - select MACH_TAVOREVB3 - -if !ARCH_PXA_V7 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" config MACH_PXA3XX_DT @@ -630,7 +609,6 @@ config MACH_ZIPIT2 bool "Zipit Z2 Handheld" select HAVE_PWM select PXA27x -endif endmenu config PXA25x @@ -688,18 +666,6 @@ config CPU_PXA935 help PXA935 (codename Tavor-P65) -config PXA95x - bool - select CPU_PJ4 - help - Select code specific to PXA95x variants - -config CPU_PXA955 - bool - select PXA95x - help - PXA950 (codename MG1) - config PXA_SHARP_C7xx bool select SHARPSL_PM diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index ee88d6eae648..12c500558387 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -19,7 +19,6 @@ endif obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o -obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o obj-$(CONFIG_CPU_PXA930) += pxa930.o @@ -36,9 +35,7 @@ obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o obj-$(CONFIG_MACH_LITTLETON) += littleton.o obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o -obj-$(CONFIG_MACH_TAVOREVB3) += tavorevb3.o obj-$(CONFIG_MACH_SAAR) += saar.o -obj-$(CONFIG_MACH_SAARB) += saarb.o # 3rd Party Dev Platforms obj-$(CONFIG_ARCH_PXA_IDP) += idp.o diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h index 3a258b1bf1aa..1f65d32c8d5e 100644 --- a/arch/arm/mach-pxa/clock.h +++ b/arch/arm/mach-pxa/clock.h @@ -57,7 +57,7 @@ void clk_pxa2xx_cken_disable(struct clk *clk); extern struct syscore_ops pxa2xx_clock_syscore_ops; -#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) +#if defined(CONFIG_PXA3xx) #define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay) \ struct clk clk_##_name = { \ .ops = &clk_pxa3xx_cken_ops, \ diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index ddaa04de8e22..daa86d39ed9e 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -703,7 +703,7 @@ void __init pxa_set_ohci_info(struct pxaohci_platform_data *info) } #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) static struct resource pxa27x_resource_keypad[] = { [0] = { .start = 0x41500000, @@ -872,7 +872,7 @@ struct platform_device pxa27x_device_pwm1 = { .resource = pxa27x_resource_pwm1, .num_resources = ARRAY_SIZE(pxa27x_resource_pwm1), }; -#endif /* CONFIG_PXA27x || CONFIG_PXA3xx || CONFIG_PXA95x*/ +#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ #ifdef CONFIG_PXA3xx static struct resource pxa3xx_resources_mci2[] = { @@ -981,7 +981,7 @@ struct platform_device pxa3xx_device_gcu = { #endif /* CONFIG_PXA3xx */ -#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) +#if defined(CONFIG_PXA3xx) static struct resource pxa3xx_resources_i2c_power[] = { { .start = 0x40f500c0, @@ -1082,7 +1082,7 @@ struct platform_device pxa3xx_device_ssp4 = { .resource = pxa3xx_resource_ssp4, .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4), }; -#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */ +#endif /* CONFIG_PXA3xx */ struct resource pxa_resource_gpio[] = { { diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 56d92e5cad85..ccb06e485520 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -194,17 +194,6 @@ #define __cpu_is_pxa935(id) (0) #endif -#ifdef CONFIG_CPU_PXA955 -#define __cpu_is_pxa955(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x581 || _id == 0xc08 \ - || _id == 0xb76; \ - }) -#else -#define __cpu_is_pxa955(id) (0) -#endif - #define cpu_is_pxa210() \ ({ \ __cpu_is_pxa210(read_cpuid_id()); \ @@ -255,10 +244,6 @@ __cpu_is_pxa935(read_cpuid_id()); \ }) -#define cpu_is_pxa955() \ - ({ \ - __cpu_is_pxa955(read_cpuid_id()); \ - }) /* @@ -297,15 +282,6 @@ #define __cpu_is_pxa93x(id) (0) #endif -#ifdef CONFIG_PXA95x -#define __cpu_is_pxa95x(id) \ - ({ \ - __cpu_is_pxa955(id); \ - }) -#else -#define __cpu_is_pxa95x(id) (0) -#endif - #define cpu_is_pxa2xx() \ ({ \ __cpu_is_pxa2xx(read_cpuid_id()); \ @@ -321,10 +297,6 @@ __cpu_is_pxa93x(read_cpuid_id()); \ }) -#define cpu_is_pxa95x() \ - ({ \ - __cpu_is_pxa95x(read_cpuid_id()); \ - }) /* * return current memory and LCD clock frequency in units of 10kHz diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 8765782dd955..48c2fd851686 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -84,7 +84,6 @@ #define IRQ_PXA935_MMC0 PXA_IRQ(72) /* MMC0 Controller (PXA935) */ #define IRQ_PXA935_MMC1 PXA_IRQ(73) /* MMC1 Controller (PXA935) */ #define IRQ_PXA935_MMC2 PXA_IRQ(74) /* MMC2 Controller (PXA935) */ -#define IRQ_PXA955_MMC3 PXA_IRQ(75) /* MMC3 Controller (PXA955) */ #define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */ #define PXA_GPIO_IRQ_BASE PXA_IRQ(96) diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx.h b/arch/arm/mach-pxa/include/mach/pxa3xx.h index cd3e57f42688..6dd7fa163e29 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx.h @@ -7,7 +7,6 @@ extern void __init pxa3xx_map_io(void); extern void __init pxa3xx_init_irq(void); -extern void __init pxa95x_init_irq(void); #define pxa3xx_handle_irq ichp_handle_irq diff --git a/arch/arm/mach-pxa/include/mach/pxa95x.h b/arch/arm/mach-pxa/include/mach/pxa95x.h deleted file mode 100644 index cbb097c4cb1f..000000000000 --- a/arch/arm/mach-pxa/include/mach/pxa95x.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_PXA95X_H -#define __MACH_PXA95X_H - -#include <mach/pxa3xx.h> -#include <mach/mfp-pxa930.h> - -#endif /* __MACH_PXA95X_H */ diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c index 7dbe3ccf1993..e329ccefd364 100644 --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -384,18 +384,7 @@ static struct platform_driver pxa3xx_u2d_ulpi_driver = { .probe = pxa3xx_u2d_probe, .remove = pxa3xx_u2d_remove, }; - -static int pxa3xx_u2d_ulpi_init(void) -{ - return platform_driver_register(&pxa3xx_u2d_ulpi_driver); -} -module_init(pxa3xx_u2d_ulpi_init); - -static void __exit pxa3xx_u2d_ulpi_exit(void) -{ - platform_driver_unregister(&pxa3xx_u2d_ulpi_driver); -} -module_exit(pxa3xx_u2d_ulpi_exit); +module_platform_driver(pxa3xx_u2d_ulpi_driver); MODULE_DESCRIPTION("PXA3xx U2D ULPI driver"); MODULE_AUTHOR("Igor Grinberg"); diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c deleted file mode 100644 index 47601f80e6e7..000000000000 --- a/arch/arm/mach-pxa/pxa95x.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/pxa95x.c - * - * code specific to PXA95x aka MGx - * - * Copyright (C) 2009-2010 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pm.h> -#include <linux/platform_device.h> -#include <linux/i2c/pxa-i2c.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/pxa930.h> -#include <mach/reset.h> -#include <mach/pm.h> -#include <mach/dma.h> - -#include "generic.h" -#include "devices.h" -#include "clock.h" - -static struct mfp_addr_map pxa95x_mfp_addr_map[] __initdata = { - - MFP_ADDR(GPIO0, 0x02e0), - MFP_ADDR(GPIO1, 0x02dc), - MFP_ADDR(GPIO2, 0x02e8), - MFP_ADDR(GPIO3, 0x02d8), - MFP_ADDR(GPIO4, 0x02e4), - MFP_ADDR(GPIO5, 0x02ec), - MFP_ADDR(GPIO6, 0x02f8), - MFP_ADDR(GPIO7, 0x02fc), - MFP_ADDR(GPIO8, 0x0300), - MFP_ADDR(GPIO9, 0x02d4), - MFP_ADDR(GPIO10, 0x02f4), - MFP_ADDR(GPIO11, 0x02f0), - MFP_ADDR(GPIO12, 0x0304), - MFP_ADDR(GPIO13, 0x0310), - MFP_ADDR(GPIO14, 0x0308), - MFP_ADDR(GPIO15, 0x030c), - MFP_ADDR(GPIO16, 0x04e8), - MFP_ADDR(GPIO17, 0x04f4), - MFP_ADDR(GPIO18, 0x04f8), - MFP_ADDR(GPIO19, 0x04fc), - MFP_ADDR(GPIO20, 0x0518), - MFP_ADDR(GPIO21, 0x051c), - MFP_ADDR(GPIO22, 0x04ec), - MFP_ADDR(GPIO23, 0x0500), - MFP_ADDR(GPIO24, 0x04f0), - MFP_ADDR(GPIO25, 0x0504), - MFP_ADDR(GPIO26, 0x0510), - MFP_ADDR(GPIO27, 0x0514), - MFP_ADDR(GPIO28, 0x0520), - MFP_ADDR(GPIO29, 0x0600), - MFP_ADDR(GPIO30, 0x0618), - MFP_ADDR(GPIO31, 0x0610), - MFP_ADDR(GPIO32, 0x060c), - MFP_ADDR(GPIO33, 0x061c), - MFP_ADDR(GPIO34, 0x0620), - MFP_ADDR(GPIO35, 0x0628), - MFP_ADDR(GPIO36, 0x062c), - MFP_ADDR(GPIO37, 0x0630), - MFP_ADDR(GPIO38, 0x0634), - MFP_ADDR(GPIO39, 0x0638), - MFP_ADDR(GPIO40, 0x063c), - MFP_ADDR(GPIO41, 0x0614), - MFP_ADDR(GPIO42, 0x0624), - MFP_ADDR(GPIO43, 0x0608), - MFP_ADDR(GPIO44, 0x0604), - MFP_ADDR(GPIO45, 0x050c), - MFP_ADDR(GPIO46, 0x0508), - MFP_ADDR(GPIO47, 0x02bc), - MFP_ADDR(GPIO48, 0x02b4), - MFP_ADDR(GPIO49, 0x02b8), - MFP_ADDR(GPIO50, 0x02c8), - MFP_ADDR(GPIO51, 0x02c0), - MFP_ADDR(GPIO52, 0x02c4), - MFP_ADDR(GPIO53, 0x02d0), - MFP_ADDR(GPIO54, 0x02cc), - MFP_ADDR(GPIO55, 0x029c), - MFP_ADDR(GPIO56, 0x02a0), - MFP_ADDR(GPIO57, 0x0294), - MFP_ADDR(GPIO58, 0x0298), - MFP_ADDR(GPIO59, 0x02a4), - MFP_ADDR(GPIO60, 0x02a8), - MFP_ADDR(GPIO61, 0x02b0), - MFP_ADDR(GPIO62, 0x02ac), - MFP_ADDR(GPIO63, 0x0640), - MFP_ADDR(GPIO64, 0x065c), - MFP_ADDR(GPIO65, 0x0648), - MFP_ADDR(GPIO66, 0x0644), - MFP_ADDR(GPIO67, 0x0674), - MFP_ADDR(GPIO68, 0x0658), - MFP_ADDR(GPIO69, 0x0654), - MFP_ADDR(GPIO70, 0x0660), - MFP_ADDR(GPIO71, 0x0668), - MFP_ADDR(GPIO72, 0x0664), - MFP_ADDR(GPIO73, 0x0650), - MFP_ADDR(GPIO74, 0x066c), - MFP_ADDR(GPIO75, 0x064c), - MFP_ADDR(GPIO76, 0x0670), - MFP_ADDR(GPIO77, 0x0678), - MFP_ADDR(GPIO78, 0x067c), - MFP_ADDR(GPIO79, 0x0694), - MFP_ADDR(GPIO80, 0x069c), - MFP_ADDR(GPIO81, 0x06a0), - MFP_ADDR(GPIO82, 0x06a4), - MFP_ADDR(GPIO83, 0x0698), - MFP_ADDR(GPIO84, 0x06bc), - MFP_ADDR(GPIO85, 0x06b4), - MFP_ADDR(GPIO86, 0x06b0), - MFP_ADDR(GPIO87, 0x06c0), - MFP_ADDR(GPIO88, 0x06c4), - MFP_ADDR(GPIO89, 0x06ac), - MFP_ADDR(GPIO90, 0x0680), - MFP_ADDR(GPIO91, 0x0684), - MFP_ADDR(GPIO92, 0x0688), - MFP_ADDR(GPIO93, 0x0690), - MFP_ADDR(GPIO94, 0x068c), - MFP_ADDR(GPIO95, 0x06a8), - MFP_ADDR(GPIO96, 0x06b8), - MFP_ADDR(GPIO97, 0x0410), - MFP_ADDR(GPIO98, 0x0418), - MFP_ADDR(GPIO99, 0x041c), - MFP_ADDR(GPIO100, 0x0414), - MFP_ADDR(GPIO101, 0x0408), - MFP_ADDR(GPIO102, 0x0324), - MFP_ADDR(GPIO103, 0x040c), - MFP_ADDR(GPIO104, 0x0400), - MFP_ADDR(GPIO105, 0x0328), - MFP_ADDR(GPIO106, 0x0404), - - MFP_ADDR(GPIO159, 0x0524), - MFP_ADDR(GPIO163, 0x0534), - MFP_ADDR(GPIO167, 0x0544), - MFP_ADDR(GPIO168, 0x0548), - MFP_ADDR(GPIO169, 0x054c), - MFP_ADDR(GPIO170, 0x0550), - MFP_ADDR(GPIO171, 0x0554), - MFP_ADDR(GPIO172, 0x0558), - MFP_ADDR(GPIO173, 0x055c), - - MFP_ADDR(nXCVREN, 0x0204), - MFP_ADDR(DF_CLE_nOE, 0x020c), - MFP_ADDR(DF_nADV1_ALE, 0x0218), - MFP_ADDR(DF_SCLK_E, 0x0214), - MFP_ADDR(DF_SCLK_S, 0x0210), - MFP_ADDR(nBE0, 0x021c), - MFP_ADDR(nBE1, 0x0220), - MFP_ADDR(DF_nADV2_ALE, 0x0224), - MFP_ADDR(DF_INT_RnB, 0x0228), - MFP_ADDR(DF_nCS0, 0x022c), - MFP_ADDR(DF_nCS1, 0x0230), - MFP_ADDR(nLUA, 0x0254), - MFP_ADDR(nLLA, 0x0258), - MFP_ADDR(DF_nWE, 0x0234), - MFP_ADDR(DF_nRE_nOE, 0x0238), - MFP_ADDR(DF_ADDR0, 0x024c), - MFP_ADDR(DF_ADDR1, 0x0250), - MFP_ADDR(DF_ADDR2, 0x025c), - MFP_ADDR(DF_ADDR3, 0x0260), - MFP_ADDR(DF_IO0, 0x023c), - MFP_ADDR(DF_IO1, 0x0240), - MFP_ADDR(DF_IO2, 0x0244), - MFP_ADDR(DF_IO3, 0x0248), - MFP_ADDR(DF_IO4, 0x0264), - MFP_ADDR(DF_IO5, 0x0268), - MFP_ADDR(DF_IO6, 0x026c), - MFP_ADDR(DF_IO7, 0x0270), - MFP_ADDR(DF_IO8, 0x0274), - MFP_ADDR(DF_IO9, 0x0278), - MFP_ADDR(DF_IO10, 0x027c), - MFP_ADDR(DF_IO11, 0x0280), - MFP_ADDR(DF_IO12, 0x0284), - MFP_ADDR(DF_IO13, 0x0288), - MFP_ADDR(DF_IO14, 0x028c), - MFP_ADDR(DF_IO15, 0x0290), - - MFP_ADDR(GSIM_UIO, 0x0314), - MFP_ADDR(GSIM_UCLK, 0x0318), - MFP_ADDR(GSIM_UDET, 0x031c), - MFP_ADDR(GSIM_nURST, 0x0320), - - MFP_ADDR(PMIC_INT, 0x06c8), - - MFP_ADDR(RDY, 0x0200), - - MFP_ADDR_END, -}; - -static DEFINE_CK(pxa95x_lcd, LCD, &clk_pxa3xx_hsio_ops); -static DEFINE_CLK(pxa95x_pout, &clk_pxa3xx_pout_ops, 13000000, 70); -static DEFINE_PXA3_CKEN(pxa95x_ffuart, FFUART, 14857000, 1); -static DEFINE_PXA3_CKEN(pxa95x_btuart, BTUART, 14857000, 1); -static DEFINE_PXA3_CKEN(pxa95x_stuart, STUART, 14857000, 1); -static DEFINE_PXA3_CKEN(pxa95x_i2c, I2C, 32842000, 0); -static DEFINE_PXA3_CKEN(pxa95x_keypad, KEYPAD, 32768, 0); -static DEFINE_PXA3_CKEN(pxa95x_ssp1, SSP1, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_ssp2, SSP2, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa95x_gpio, GPIO, 13000000, 0); - -static struct clk_lookup pxa95x_clkregs[] = { - INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"), - /* Power I2C clock is always on */ - INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), - INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL), - INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL), - INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL), - INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-uart.2", NULL), - INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-ir", "UARTCLK"), - INIT_CLKREG(&clk_pxa95x_i2c, "pxa2xx-i2c.0", NULL), - INIT_CLKREG(&clk_pxa95x_keypad, "pxa27x-keypad", NULL), - INIT_CLKREG(&clk_pxa95x_ssp1, "pxa27x-ssp.0", NULL), - INIT_CLKREG(&clk_pxa95x_ssp2, "pxa27x-ssp.1", NULL), - INIT_CLKREG(&clk_pxa95x_ssp3, "pxa27x-ssp.2", NULL), - INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL), - INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL), - INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL), - INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), -}; - -void __init pxa95x_init_irq(void) -{ - pxa_init_irq(96, NULL); -} - -/* - * device registration specific to PXA93x. - */ - -void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info) -{ - pxa_register_device(&pxa3xx_device_i2c_power, info); -} - -static struct platform_device *devices[] __initdata = { - &pxa_device_gpio, - &sa1100_device_rtc, - &pxa_device_rtc, - &pxa27x_device_ssp1, - &pxa27x_device_ssp2, - &pxa27x_device_ssp3, - &pxa3xx_device_ssp4, - &pxa27x_device_pwm0, - &pxa27x_device_pwm1, -}; - -static int __init pxa95x_init(void) -{ - int ret = 0, i; - - if (cpu_is_pxa95x()) { - mfp_init_base(io_p2v(MFPR_BASE)); - mfp_init_addr(pxa95x_mfp_addr_map); - - reset_status = ARSR; - - /* - * clear RDH bit every time after reset - * - * Note: the last 3 bits DxS are write-1-to-clear so carefully - * preserve them here in case they will be referenced later - */ - ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S); - - clkdev_add_table(pxa95x_clkregs, ARRAY_SIZE(pxa95x_clkregs)); - - if ((ret = pxa_init_dma(IRQ_DMA, 32))) - return ret; - - register_syscore_ops(&pxa_irq_syscore_ops); - register_syscore_ops(&pxa3xx_clock_syscore_ops); - - ret = platform_add_devices(devices, ARRAY_SIZE(devices)); - } - - return ret; -} - -postcore_initcall(pxa95x_init); diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c deleted file mode 100644 index 5aded5e6148f..000000000000 --- a/arch/arm/mach-pxa/saarb.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/saarb.c - * - * Support for the Marvell Handheld Platform (aka SAARB) - * - * Copyright (C) 2007-2010 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> -#include <linux/mfd/88pm860x.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <mach/irqs.h> -#include <mach/hardware.h> -#include <mach/mfp.h> -#include <mach/mfp-pxa930.h> -#include <mach/pxa95x.h> - -#include "generic.h" - -#define SAARB_NR_IRQS (IRQ_BOARD_START + 40) - -static struct pm860x_touch_pdata saarb_touch = { - .gpadc_prebias = 1, - .slot_cycle = 1, - .tsi_prebias = 6, - .pen_prebias = 16, - .pen_prechg = 2, - .res_x = 300, -}; - -static struct pm860x_backlight_pdata saarb_backlight[] = { - { - .id = PM8606_ID_BACKLIGHT, - .iset = PM8606_WLED_CURRENT(24), - .flags = PM8606_BACKLIGHT1, - }, - {}, -}; - -static struct pm860x_led_pdata saarb_led[] = { - { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_RED, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_GREEN, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_BLUE, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_RED, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_GREEN, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_BLUE, - }, -}; - -static struct pm860x_platform_data saarb_pm8607_info = { - .touch = &saarb_touch, - .backlight = &saarb_backlight[0], - .led = &saarb_led[0], - .companion_addr = 0x10, - .irq_mode = 0, - .irq_base = IRQ_BOARD_START, - - .i2c_port = GI2C_PORT, -}; - -static struct i2c_board_info saarb_i2c_info[] = { - { - .type = "88PM860x", - .addr = 0x34, - .platform_data = &saarb_pm8607_info, - .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), - }, -}; - -static void __init saarb_init(void) -{ - pxa_set_ffuart_info(NULL); - pxa_set_i2c_info(NULL); - i2c_register_board_info(0, ARRAY_AND_SIZE(saarb_i2c_info)); -} - -MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)") - .atag_offset = 0x100, - .map_io = pxa3xx_map_io, - .nr_irqs = SAARB_NR_IRQS, - .init_irq = pxa95x_init_irq, - .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, - .init_machine = saarb_init, - .restart = pxa_restart, -MACHINE_END - diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c deleted file mode 100644 index f7d9305cfd77..000000000000 --- a/arch/arm/mach-pxa/tavorevb3.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/tavorevb3.c - * - * Support for the Marvell EVB3 Development Platform. - * - * Copyright: (C) Copyright 2008-2010 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/i2c/pxa-i2c.h> -#include <linux/gpio.h> -#include <linux/mfd/88pm860x.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <mach/pxa930.h> - -#include "devices.h" -#include "generic.h" - -#define TAVOREVB3_NR_IRQS (IRQ_BOARD_START + 24) - -static mfp_cfg_t evb3_mfp_cfg[] __initdata = { - /* UART */ - GPIO53_UART1_TXD, - GPIO54_UART1_RXD, - - /* PMIC */ - PMIC_INT_GPIO83, -}; - -#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE) -static struct pm860x_touch_pdata evb3_touch = { - .gpadc_prebias = 1, - .slot_cycle = 1, - .tsi_prebias = 6, - .pen_prebias = 16, - .pen_prechg = 2, - .res_x = 300, -}; - -static struct pm860x_backlight_pdata evb3_backlight[] = { - { - .id = PM8606_ID_BACKLIGHT, - .iset = PM8606_WLED_CURRENT(24), - .flags = PM8606_BACKLIGHT1, - }, - {}, -}; - -static struct pm860x_led_pdata evb3_led[] = { - { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_RED, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_GREEN, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED1_BLUE, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_RED, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_GREEN, - }, { - .id = PM8606_ID_LED, - .iset = PM8606_LED_CURRENT(12), - .flags = PM8606_LED2_BLUE, - }, -}; - -static struct pm860x_platform_data evb3_pm8607_info = { - .touch = &evb3_touch, - .backlight = &evb3_backlight[0], - .led = &evb3_led[0], - .companion_addr = 0x10, - .irq_mode = 0, - .irq_base = IRQ_BOARD_START, - - .i2c_port = GI2C_PORT, -}; - -static struct i2c_board_info evb3_i2c_info[] = { - { - .type = "88PM860x", - .addr = 0x34, - .platform_data = &evb3_pm8607_info, - .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)), - }, -}; - -static void __init evb3_init_i2c(void) -{ - pxa_set_i2c_info(NULL); - i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info)); -} -#else -static inline void evb3_init_i2c(void) {} -#endif - -static void __init evb3_init(void) -{ - /* initialize MFP configurations */ - pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg)); - - pxa_set_ffuart_info(NULL); - - evb3_init_i2c(); -} - -MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)") - .atag_offset = 0x100, - .map_io = pxa3xx_map_io, - .nr_irqs = TAVOREVB3_NR_IRQS, - .init_irq = pxa3xx_init_irq, - .handle_irq = pxa3xx_handle_irq, - .timer = &pxa_timer, - .init_machine = evb3_init, - .restart = pxa_restart, -MACHINE_END diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c index 7f689ce1be61..bdaba59b42dc 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c @@ -158,12 +158,6 @@ static struct clk init_clocks_off[] = { .devname = "s3c2410-spi.0", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SPI0, - }, { - .name = "spi", - .devname = "s3c2410-spi.1", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_SPI1, } }; diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 28041e83dc82..1a6f85777449 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -138,11 +138,7 @@ static struct clk init_clocks_off[] = { .ctrlbit = S3C_CLKCON_PCLK_TSADC, }, { .name = "i2c", -#ifdef CONFIG_S3C_DEV_I2C1 .devname = "s3c2440-i2c.0", -#else - .devname = "s3c2440-i2c", -#endif .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_IIC, @@ -319,10 +315,6 @@ static struct clk init_clocks_off[] = { .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_MFC, }, { - .name = "cam", - .enable = s3c64xx_sclk_ctrl, - .ctrlbit = S3C_CLKCON_SCLK_CAM, - }, { .name = "sclk_jpeg", .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_JPEG, @@ -681,15 +673,6 @@ static struct clksrc_sources clkset_audio2 = { .nr_sources = ARRAY_SIZE(clkset_audio2_list), }; -static struct clk *clkset_camif_list[] = { - &clk_h2, -}; - -static struct clksrc_sources clkset_camif = { - .sources = clkset_camif_list, - .nr_sources = ARRAY_SIZE(clkset_camif_list), -}; - static struct clksrc_clk clksrcs[] = { { .clk = { @@ -744,10 +727,9 @@ static struct clksrc_clk clksrcs[] = { .name = "camera", .ctrlbit = S3C_CLKCON_SCLK_CAM, .enable = s3c64xx_sclk_ctrl, + .parent = &clk_h2, }, .reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 }, - .reg_src = { .reg = NULL, .shift = 0, .size = 0 }, - .sources = &clkset_camif, }, }; diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index be746e33e86c..aef303b8997e 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -155,7 +155,6 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) /* initialise the io descriptors we need for initialisation */ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); iotable_init(mach_desc, size); - init_consistent_dma_size(SZ_8M); /* detect cpu id */ s3c64xx_init_cpu(); diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 111e404a81fd..8ae5800e807f 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -187,7 +187,6 @@ void __init s5p6440_map_io(void) s5p6440_default_sdhci2(); iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); - init_consistent_dma_size(SZ_8M); } void __init s5p6450_map_io(void) @@ -202,7 +201,6 @@ void __init s5p6450_map_io(void) s5p6450_default_sdhci2(); iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); - init_consistent_dma_size(SZ_8M); } /* diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index a0c50efe8145..9dfe93e2624d 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -169,8 +169,6 @@ void __init s5pv210_init_io(struct map_desc *mach_desc, int size) void __init s5pv210_map_io(void) { - init_consistent_dma_size(14 << 20); - /* initialise device information early */ s5pv210_default_sdhci0(); s5pv210_default_sdhci1(); diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 55e1dba4ffde..c72b31078c99 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -774,7 +774,6 @@ static void __init goni_pmic_init(void) /* MoviNAND */ static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = { .max_width = 4, - .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, }; diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 11bb1d984197..96f11394c7c0 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -66,12 +66,6 @@ static struct map_desc r8a7740_io_desc[] __initdata = { void __init r8a7740_map_io(void) { iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc)); - - /* - * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't - * enough to allocate the frame buffer memory. - */ - init_consistent_dma_size(12 << 20); } /* SCIFA0 */ diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index a07954fbcd22..be6f746c97fa 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -58,12 +58,6 @@ static struct map_desc sh7372_io_desc[] __initdata = { void __init sh7372_map_io(void) { iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc)); - - /* - * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't - * enough to allocate the frame buffer memory. - */ - init_consistent_dma_size(12 << 20); } /* SCIFA0 */ diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 9aa653b3eb32..6cc23cc83509 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -12,10 +12,12 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CPU_IDLE) += sleep.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks_data.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-t20.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks_data.o +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_speedo.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-t30.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += reset.o diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c index b5015d0f1912..d091675ba376 100644 --- a/arch/arm/mach-tegra/apbio.c +++ b/arch/arm/mach-tegra/apbio.c @@ -15,7 +15,6 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <mach/iomap.h> #include <linux/of.h> #include <linux/dmaengine.h> #include <linux/dma-mapping.h> @@ -24,9 +23,8 @@ #include <linux/sched.h> #include <linux/mutex.h> -#include <mach/dma.h> - #include "apbio.h" +#include "iomap.h" #if defined(CONFIG_TEGRA20_APB_DMA) static DEFINE_MUTEX(tegra_apb_dma_lock); @@ -71,7 +69,6 @@ bool tegra_apb_dma_init(void) dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - dma_sconfig.slave_id = TEGRA_DMA_REQ_SEL_CNTR; dma_sconfig.src_maxburst = 1; dma_sconfig.dst_maxburst = 1; diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index aa5325cd1c42..734d9cc87f2e 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -40,12 +40,10 @@ #include <asm/mach/time.h> #include <asm/setup.h> -#include <mach/iomap.h> -#include <mach/irqs.h> - #include "board.h" #include "clock.h" #include "common.h" +#include "iomap.h" struct tegra_ehci_platform_data tegra_ehci1_pdata = { .operating_mode = TEGRA_USB_OTG, @@ -91,6 +89,17 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { &tegra_ehci3_pdata), OF_DEV_AUXDATA("nvidia,tegra20-apbdma", TEGRA_APB_DMA_BASE, "tegra-apbdma", NULL), OF_DEV_AUXDATA("nvidia,tegra20-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-sflash", 0x7000c380, "spi", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D400, "spi_tegra.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D600, "spi_tegra.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D800, "spi_tegra.2", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000DA00, "spi_tegra.3", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-host1x", 0x50000000, "host1x", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-dc", 0x54200000, "tegradc.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-dc", 0x54240000, "tegradc.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-hdmi", 0x54280000, "hdmi", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-dsi", 0x54300000, "dsi", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-tvo", 0x542c0000, "tvo", NULL), {} }; @@ -104,8 +113,20 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { { "pll_a", "pll_p_out1", 56448000, true }, { "pll_a_out0", "pll_a", 11289600, true }, { "cdev1", NULL, 0, true }, + { "blink", "clk_32k", 32768, true }, { "i2s1", "pll_a_out0", 11289600, false}, { "i2s2", "pll_a_out0", 11289600, false}, + { "sdmmc1", "pll_p", 48000000, false}, + { "sdmmc3", "pll_p", 48000000, false}, + { "sdmmc4", "pll_p", 48000000, false}, + { "spi", "pll_p", 20000000, false }, + { "sbc1", "pll_p", 100000000, false }, + { "sbc2", "pll_p", 100000000, false }, + { "sbc3", "pll_p", 100000000, false }, + { "sbc4", "pll_p", 100000000, false }, + { "host1x", "pll_c", 150000000, false }, + { "disp1", "pll_p", 600000000, false }, + { "disp2", "pll_p", 600000000, false }, { NULL, NULL, 0, 0}, }; diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index 5e92a81f9a2e..6497d1236b08 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -33,11 +33,10 @@ #include <asm/mach/arch.h> #include <asm/hardware/gic.h> -#include <mach/iomap.h> - #include "board.h" #include "clock.h" #include "common.h" +#include "iomap.h" struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL), @@ -52,6 +51,18 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL), OF_DEV_AUXDATA("nvidia,tegra30-apbdma", 0x6000a000, "tegra-apbdma", NULL), OF_DEV_AUXDATA("nvidia,tegra30-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000D400, "spi_tegra.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000D600, "spi_tegra.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000D800, "spi_tegra.2", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DA00, "spi_tegra.3", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DC00, "spi_tegra.4", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DE00, "spi_tegra.5", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-host1x", 0x50000000, "host1x", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-dc", 0x54200000, "tegradc.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-dc", 0x54240000, "tegradc.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-hdmi", 0x54280000, "hdmi", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-dsi", 0x54300000, "dsi", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-tvo", 0x542c0000, "tvo", NULL), {} }; @@ -62,11 +73,24 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { { "pll_a_out0", "pll_a", 11289600, true }, { "extern1", "pll_a_out0", 0, true }, { "clk_out_1", "extern1", 0, true }, + { "blink", "clk_32k", 32768, true }, { "i2s0", "pll_a_out0", 11289600, false}, { "i2s1", "pll_a_out0", 11289600, false}, { "i2s2", "pll_a_out0", 11289600, false}, { "i2s3", "pll_a_out0", 11289600, false}, { "i2s4", "pll_a_out0", 11289600, false}, + { "sdmmc1", "pll_p", 48000000, false}, + { "sdmmc3", "pll_p", 48000000, false}, + { "sdmmc4", "pll_p", 48000000, false}, + { "sbc1", "pll_p", 100000000, false}, + { "sbc2", "pll_p", 100000000, false}, + { "sbc3", "pll_p", 100000000, false}, + { "sbc4", "pll_p", 100000000, false}, + { "sbc5", "pll_p", 100000000, false}, + { "sbc6", "pll_p", 100000000, false}, + { "host1x", "pll_c", 150000000, false}, + { "disp1", "pll_p", 600000000, false}, + { "disp2", "pll_p", 600000000, false}, { NULL, NULL, 0, 0}, }; diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index fd82085eca5d..867bf8bf5561 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -27,8 +27,6 @@ #include <linux/seq_file.h> #include <linux/slab.h> -#include <mach/clk.h> - #include "board.h" #include "clock.h" #include "tegra_cpu_car.h" diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 0b0a5f556d34..3e03e5f15c14 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -26,13 +26,13 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/hardware/gic.h> -#include <mach/iomap.h> #include <mach/powergate.h> #include "board.h" #include "clock.h" #include "common.h" #include "fuse.h" +#include "iomap.h" #include "pmc.h" #include "apbio.h" #include "sleep.h" @@ -104,25 +104,26 @@ static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = { { "clk_m", NULL, 0, true }, { "pll_p", "clk_m", 408000000, true }, { "pll_p_out1", "pll_p", 9600000, true }, + { "pll_p_out4", "pll_p", 102000000, true }, + { "sclk", "pll_p_out4", 102000000, true }, + { "hclk", "sclk", 102000000, true }, + { "pclk", "hclk", 51000000, true }, { NULL, NULL, 0, 0}, }; #endif -static void __init tegra_init_cache(u32 tag_latency, u32 data_latency) +static void __init tegra_init_cache(void) { #ifdef CONFIG_CACHE_L2X0 void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; u32 aux_ctrl, cache_type; - writel_relaxed(tag_latency, p + L2X0_TAG_LATENCY_CTRL); - writel_relaxed(data_latency, p + L2X0_DATA_LATENCY_CTRL); - cache_type = readl(p + L2X0_CACHE_TYPE); aux_ctrl = (cache_type & 0x700) << (17-8); - aux_ctrl |= 0x6C000001; + aux_ctrl |= 0x7C400001; - l2x0_init(p, aux_ctrl, 0x8200c3fe); + l2x0_of_init(aux_ctrl, 0x8200c3fe); #endif } @@ -134,7 +135,7 @@ void __init tegra20_init_early(void) tegra_init_fuse(); tegra2_init_clocks(); tegra_clk_init_from_table(tegra20_clk_init_table); - tegra_init_cache(0x331, 0x441); + tegra_init_cache(); tegra_pmc_init(); tegra_powergate_init(); tegra20_hotplug_init(); @@ -147,7 +148,7 @@ void __init tegra30_init_early(void) tegra_init_fuse(); tegra30_init_clocks(); tegra_clk_init_from_table(tegra30_clk_init_table); - tegra_init_cache(0x441, 0x551); + tegra_init_cache(); tegra_pmc_init(); tegra_powergate_init(); tegra30_hotplug_init(); diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index 627bf0f4262e..a74d3c7d2e26 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -30,9 +30,6 @@ #include <linux/io.h> #include <linux/suspend.h> - -#include <mach/clk.h> - /* Frequency table index must be sequential starting at 0 */ static struct cpufreq_frequency_table freq_table[] = { { 0, 216000 }, diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c index 566e2f88899b..9a6f051b382e 100644 --- a/arch/arm/mach-tegra/cpuidle.c +++ b/arch/arm/mach-tegra/cpuidle.c @@ -29,8 +29,6 @@ #include <asm/proc-fns.h> -#include <mach/iomap.h> - static int tegra_idle_enter_lp3(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c index f07488e0bd32..ffaa286a71e1 100644 --- a/arch/arm/mach-tegra/flowctrl.c +++ b/arch/arm/mach-tegra/flowctrl.c @@ -22,9 +22,8 @@ #include <linux/kernel.h> #include <linux/io.h> -#include <mach/iomap.h> - #include "flowctrl.h" +#include "iomap.h" u8 flowctrl_offset_halt_cpu[] = { FLOW_CTRL_HALT_CPU0_EVENTS, diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index 0b7db174a5de..8121742711fe 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -21,22 +21,28 @@ #include <linux/io.h> #include <linux/export.h> -#include <mach/iomap.h> - #include "fuse.h" +#include "iomap.h" #include "apbio.h" #define FUSE_UID_LOW 0x108 #define FUSE_UID_HIGH 0x10c #define FUSE_SKU_INFO 0x110 -#define FUSE_SPARE_BIT 0x200 + +#define TEGRA20_FUSE_SPARE_BIT 0x200 +#define TEGRA30_FUSE_SPARE_BIT 0x244 int tegra_sku_id; int tegra_cpu_process_id; int tegra_core_process_id; int tegra_chip_id; +int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */ +int tegra_soc_speedo_id; enum tegra_revision tegra_revision; +static int tegra_fuse_spare_bit; +static void (*tegra_init_speedo_data)(void); + /* The BCT to use at boot is specified by board straps that can be read * through a APB misc register and decoded. 2 bits, i.e. 4 possible BCTs. */ @@ -57,14 +63,14 @@ static const char *tegra_revision_name[TEGRA_REVISION_MAX] = { [TEGRA_REVISION_A04] = "A04", }; -static inline u32 tegra_fuse_readl(unsigned long offset) +u32 tegra_fuse_readl(unsigned long offset) { return tegra_apb_readl(TEGRA_FUSE_BASE + offset); } -static inline bool get_spare_fuse(int bit) +bool tegra_spare_fuse(int bit) { - return tegra_fuse_readl(FUSE_SPARE_BIT + bit * 4); + return tegra_fuse_readl(tegra_fuse_spare_bit + bit * 4); } static enum tegra_revision tegra_get_revision(u32 id) @@ -78,7 +84,7 @@ static enum tegra_revision tegra_get_revision(u32 id) return TEGRA_REVISION_A02; case 3: if (tegra_chip_id == TEGRA20 && - (get_spare_fuse(18) || get_spare_fuse(19))) + (tegra_spare_fuse(18) || tegra_spare_fuse(19))) return TEGRA_REVISION_A03p; else return TEGRA_REVISION_A03; @@ -89,6 +95,16 @@ static enum tegra_revision tegra_get_revision(u32 id) } } +static void tegra_get_process_id(void) +{ + u32 reg; + + reg = tegra_fuse_readl(tegra_fuse_spare_bit); + tegra_cpu_process_id = (reg >> 6) & 3; + reg = tegra_fuse_readl(tegra_fuse_spare_bit); + tegra_core_process_id = (reg >> 12) & 3; +} + void tegra_init_fuse(void) { u32 id; @@ -100,19 +116,29 @@ void tegra_init_fuse(void) reg = tegra_fuse_readl(FUSE_SKU_INFO); tegra_sku_id = reg & 0xFF; - reg = tegra_fuse_readl(FUSE_SPARE_BIT); - tegra_cpu_process_id = (reg >> 6) & 3; - - reg = tegra_fuse_readl(FUSE_SPARE_BIT); - tegra_core_process_id = (reg >> 12) & 3; - reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT); tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT; id = readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804); tegra_chip_id = (id >> 8) & 0xff; + switch (tegra_chip_id) { + case TEGRA20: + tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT; + tegra_init_speedo_data = &tegra20_init_speedo_data; + break; + case TEGRA30: + tegra_fuse_spare_bit = TEGRA30_FUSE_SPARE_BIT; + tegra_init_speedo_data = &tegra30_init_speedo_data; + break; + default: + pr_warn("Tegra: unknown chip id %d\n", tegra_chip_id); + tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT; + tegra_init_speedo_data = &tegra_get_process_id; + } + tegra_revision = tegra_get_revision(id); + tegra_init_speedo_data(); pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n", tegra_revision_name[tegra_revision], diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h index d2107b2cb85a..ff1383dd61a7 100644 --- a/arch/arm/mach-tegra/fuse.h +++ b/arch/arm/mach-tegra/fuse.h @@ -42,11 +42,27 @@ extern int tegra_sku_id; extern int tegra_cpu_process_id; extern int tegra_core_process_id; extern int tegra_chip_id; +extern int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */ +extern int tegra_soc_speedo_id; extern enum tegra_revision tegra_revision; extern int tegra_bct_strapping; unsigned long long tegra_chip_uid(void); void tegra_init_fuse(void); +bool tegra_spare_fuse(int bit); +u32 tegra_fuse_readl(unsigned long offset); + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +void tegra20_init_speedo_data(void); +#else +static inline void tegra20_init_speedo_data(void) {} +#endif + +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +void tegra30_init_speedo_data(void); +#else +static inline void tegra30_init_speedo_data(void) {} +#endif #endif diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index 6addc78cb6b2..93f0370cc95b 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -3,9 +3,8 @@ #include <asm/cache.h> -#include <mach/iomap.h> - #include "flowctrl.h" +#include "iomap.h" #include "reset.h" #include "sleep.h" diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S index 8ce0661b8a3d..44ca7b1d8b8a 100644 --- a/arch/arm/mach-tegra/include/mach/debug-macro.S +++ b/arch/arm/mach-tegra/include/mach/debug-macro.S @@ -26,8 +26,8 @@ #include <linux/serial_reg.h> -#include <mach/iomap.h> -#include <mach/irammap.h> +#include "../../iomap.h" +#include "../../irammap.h" .macro addruart, rp, rv, tmp adr \rp, 99f @ actual addr of 99f diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h deleted file mode 100644 index 3081cc6dda3b..000000000000 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * arch/arm/mach-tegra/include/mach/dma.h - * - * Copyright (c) 2008-2009, NVIDIA Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#ifndef __MACH_TEGRA_DMA_H -#define __MACH_TEGRA_DMA_H - -#include <linux/list.h> - -#define TEGRA_DMA_REQ_SEL_CNTR 0 -#define TEGRA_DMA_REQ_SEL_I2S_2 1 -#define TEGRA_DMA_REQ_SEL_I2S_1 2 -#define TEGRA_DMA_REQ_SEL_SPD_I 3 -#define TEGRA_DMA_REQ_SEL_UI_I 4 -#define TEGRA_DMA_REQ_SEL_MIPI 5 -#define TEGRA_DMA_REQ_SEL_I2S2_2 6 -#define TEGRA_DMA_REQ_SEL_I2S2_1 7 -#define TEGRA_DMA_REQ_SEL_UARTA 8 -#define TEGRA_DMA_REQ_SEL_UARTB 9 -#define TEGRA_DMA_REQ_SEL_UARTC 10 -#define TEGRA_DMA_REQ_SEL_SPI 11 -#define TEGRA_DMA_REQ_SEL_AC97 12 -#define TEGRA_DMA_REQ_SEL_ACMODEM 13 -#define TEGRA_DMA_REQ_SEL_SL4B 14 -#define TEGRA_DMA_REQ_SEL_SL2B1 15 -#define TEGRA_DMA_REQ_SEL_SL2B2 16 -#define TEGRA_DMA_REQ_SEL_SL2B3 17 -#define TEGRA_DMA_REQ_SEL_SL2B4 18 -#define TEGRA_DMA_REQ_SEL_UARTD 19 -#define TEGRA_DMA_REQ_SEL_UARTE 20 -#define TEGRA_DMA_REQ_SEL_I2C 21 -#define TEGRA_DMA_REQ_SEL_I2C2 22 -#define TEGRA_DMA_REQ_SEL_I2C3 23 -#define TEGRA_DMA_REQ_SEL_DVC_I2C 24 -#define TEGRA_DMA_REQ_SEL_OWR 25 -#define TEGRA_DMA_REQ_SEL_INVALID 31 - -#endif diff --git a/arch/arm/mach-tegra/include/mach/powergate.h b/arch/arm/mach-tegra/include/mach/powergate.h index 4752b1a68f35..06763fe7529d 100644 --- a/arch/arm/mach-tegra/include/mach/powergate.h +++ b/arch/arm/mach-tegra/include/mach/powergate.h @@ -20,6 +20,8 @@ #ifndef _MACH_TEGRA_POWERGATE_H_ #define _MACH_TEGRA_POWERGATE_H_ +struct clk; + #define TEGRA_POWERGATE_CPU 0 #define TEGRA_POWERGATE_3D 1 #define TEGRA_POWERGATE_VENC 2 diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h index 937c4c50219e..27725750ca3e 100644 --- a/arch/arm/mach-tegra/include/mach/uncompress.h +++ b/arch/arm/mach-tegra/include/mach/uncompress.h @@ -28,8 +28,8 @@ #include <linux/types.h> #include <linux/serial_reg.h> -#include <mach/iomap.h> -#include <mach/irammap.h> +#include "../../iomap.h" +#include "../../irammap.h" #define BIT(x) (1 << (x)) #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c index 58b4baf9c483..7d09f301b3a1 100644 --- a/arch/arm/mach-tegra/io.c +++ b/arch/arm/mach-tegra/io.c @@ -26,9 +26,9 @@ #include <asm/page.h> #include <asm/mach/map.h> -#include <mach/iomap.h> #include "board.h" +#include "iomap.h" static struct map_desc tegra_io_desc[] __initdata = { { diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/iomap.h index fee3a94c4549..53151030a07d 100644 --- a/arch/arm/mach-tegra/include/mach/iomap.h +++ b/arch/arm/mach-tegra/iomap.h @@ -1,6 +1,4 @@ /* - * arch/arm/mach-tegra/include/mach/iomap.h - * * Copyright (C) 2010 Google, Inc. * * Author: diff --git a/arch/arm/mach-tegra/include/mach/irammap.h b/arch/arm/mach-tegra/irammap.h index 0cbe63261854..0cbe63261854 100644 --- a/arch/arm/mach-tegra/include/mach/irammap.h +++ b/arch/arm/mach-tegra/irammap.h diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 2f5bd2db8e1f..b7886f183511 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -25,9 +25,8 @@ #include <asm/hardware/gic.h> -#include <mach/iomap.h> - #include "board.h" +#include "iomap.h" #define ICTLR_CPU_IEP_VFIQ 0x08 #define ICTLR_CPU_IEP_FIR 0x14 diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index a8dba6489c9b..f18fc3ab4e58 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -37,11 +37,11 @@ #include <asm/sizes.h> #include <asm/mach/pci.h> -#include <mach/iomap.h> #include <mach/clk.h> #include <mach/powergate.h> #include "board.h" +#include "iomap.h" /* register definitions */ #define AFI_OFFSET 0x3800 diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 81cb26591acf..1b926df99c4b 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -24,8 +24,6 @@ #include <asm/mach-types.h> #include <asm/smp_scu.h> -#include <mach/clk.h> -#include <mach/iomap.h> #include <mach/powergate.h> #include "fuse.h" @@ -34,6 +32,7 @@ #include "tegra_cpu_car.h" #include "common.h" +#include "iomap.h" extern void tegra_secondary_startup(void); diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index 7af6a54404be..d4fdb5fcec20 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -19,7 +19,7 @@ #include <linux/io.h> #include <linux/of.h> -#include <mach/iomap.h> +#include "iomap.h" #define PMC_CTRL 0x0 #define PMC_CTRL_INTR_LOW (1 << 17) diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c index de0662de28a0..2cc1185d902e 100644 --- a/arch/arm/mach-tegra/powergate.c +++ b/arch/arm/mach-tegra/powergate.c @@ -28,10 +28,10 @@ #include <linux/spinlock.h> #include <mach/clk.h> -#include <mach/iomap.h> #include <mach/powergate.h> #include "fuse.h" +#include "iomap.h" #define PWRGATE_TOGGLE 0x30 #define PWRGATE_TOGGLE_START (1 << 8) diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 5beb7ebe2948..e05da7d10c3b 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -22,9 +22,8 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> -#include <mach/iomap.h> -#include <mach/irammap.h> - +#include "iomap.h" +#include "irammap.h" #include "reset.h" #include "fuse.h" diff --git a/arch/arm/mach-tegra/sleep-t20.S b/arch/arm/mach-tegra/sleep-t20.S index a36ae413e2b8..72ce709799da 100644 --- a/arch/arm/mach-tegra/sleep-t20.S +++ b/arch/arm/mach-tegra/sleep-t20.S @@ -22,8 +22,6 @@ #include <asm/assembler.h> -#include <mach/iomap.h> - #include "sleep.h" #include "flowctrl.h" diff --git a/arch/arm/mach-tegra/sleep-t30.S b/arch/arm/mach-tegra/sleep-t30.S index 777d9cee8b90..be7614b7c5cb 100644 --- a/arch/arm/mach-tegra/sleep-t30.S +++ b/arch/arm/mach-tegra/sleep-t30.S @@ -18,8 +18,6 @@ #include <asm/assembler.h> -#include <mach/iomap.h> - #include "sleep.h" #include "flowctrl.h" diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index ea81554c4833..08e9481c049e 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -26,7 +26,7 @@ #include <asm/assembler.h> -#include <mach/iomap.h> +#include "iomap.h" #include "flowctrl.h" #include "sleep.h" diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index e25a7cd703d9..4889b281c5f9 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -17,7 +17,7 @@ #ifndef __MACH_TEGRA_SLEEP_H #define __MACH_TEGRA_SLEEP_H -#include <mach/iomap.h> +#include "iomap.h" #define TEGRA_ARM_PERIF_VIRT (TEGRA_ARM_PERIF_BASE - IO_CPU_PHYS \ + IO_CPU_VIRT) diff --git a/arch/arm/mach-tegra/tegra20_clocks.c b/arch/arm/mach-tegra/tegra20_clocks.c index deb873fb12b6..4eb6bc81a87b 100644 --- a/arch/arm/mach-tegra/tegra20_clocks.c +++ b/arch/arm/mach-tegra/tegra20_clocks.c @@ -27,10 +27,9 @@ #include <linux/clkdev.h> #include <linux/clk.h> -#include <mach/iomap.h> - #include "clock.h" #include "fuse.h" +#include "iomap.h" #include "tegra2_emc.h" #include "tegra_cpu_car.h" diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c index 8d398a33adf7..a23a0734e352 100644 --- a/arch/arm/mach-tegra/tegra20_clocks_data.c +++ b/arch/arm/mach-tegra/tegra20_clocks_data.c @@ -27,8 +27,6 @@ #include <linux/io.h> #include <linux/clk.h> -#include <mach/iomap.h> - #include "clock.h" #include "fuse.h" #include "tegra2_emc.h" @@ -248,11 +246,16 @@ static struct clk_pll_freq_table tegra_pll_d_freq_table[] = { { 19200000, 216000000, 135, 12, 1, 3}, { 26000000, 216000000, 216, 26, 1, 4}, + { 12000000, 297000000, 99, 4, 1, 4 }, + { 12000000, 339000000, 113, 4, 1, 4 }, + { 12000000, 594000000, 594, 12, 1, 8}, { 13000000, 594000000, 594, 13, 1, 8}, { 19200000, 594000000, 495, 16, 1, 8}, { 26000000, 594000000, 594, 26, 1, 8}, + { 12000000, 616000000, 616, 12, 1, 8}, + { 12000000, 1000000000, 1000, 12, 1, 12}, { 13000000, 1000000000, 1000, 13, 1, 12}, { 19200000, 1000000000, 625, 12, 1, 8}, @@ -1038,9 +1041,6 @@ static struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("usbd", "utmip-pad", NULL), CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL), CLK_DUPLICATE("usbd", "tegra-otg", NULL), - CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"), - CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"), - CLK_DUPLICATE("host1x", "tegra_grhost", "host1x"), CLK_DUPLICATE("2d", "tegra_grhost", "gr2d"), CLK_DUPLICATE("3d", "tegra_grhost", "gr3d"), CLK_DUPLICATE("epp", "tegra_grhost", "epp"), @@ -1053,6 +1053,9 @@ static struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"), + CLK_DUPLICATE("pll_p", "tegradc.0", "parent"), + CLK_DUPLICATE("pll_p", "tegradc.1", "parent"), + CLK_DUPLICATE("pll_d_out0", "hdmi", "parent"), }; #define CLK(dev, con, ck) \ diff --git a/arch/arm/mach-tegra/tegra20_speedo.c b/arch/arm/mach-tegra/tegra20_speedo.c new file mode 100644 index 000000000000..fa6eb570623f --- /dev/null +++ b/arch/arm/mach-tegra/tegra20_speedo.c @@ -0,0 +1,109 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kernel.h> +#include <linux/bug.h> + +#include "fuse.h" + +#define CPU_SPEEDO_LSBIT 20 +#define CPU_SPEEDO_MSBIT 29 +#define CPU_SPEEDO_REDUND_LSBIT 30 +#define CPU_SPEEDO_REDUND_MSBIT 39 +#define CPU_SPEEDO_REDUND_OFFS (CPU_SPEEDO_REDUND_MSBIT - CPU_SPEEDO_MSBIT) + +#define CORE_SPEEDO_LSBIT 40 +#define CORE_SPEEDO_MSBIT 47 +#define CORE_SPEEDO_REDUND_LSBIT 48 +#define CORE_SPEEDO_REDUND_MSBIT 55 +#define CORE_SPEEDO_REDUND_OFFS (CORE_SPEEDO_REDUND_MSBIT - CORE_SPEEDO_MSBIT) + +#define SPEEDO_MULT 4 + +#define PROCESS_CORNERS_NUM 4 + +#define SPEEDO_ID_SELECT_0(rev) ((rev) <= 2) +#define SPEEDO_ID_SELECT_1(sku) \ + (((sku) != 20) && ((sku) != 23) && ((sku) != 24) && \ + ((sku) != 27) && ((sku) != 28)) + +enum { + SPEEDO_ID_0, + SPEEDO_ID_1, + SPEEDO_ID_2, + SPEEDO_ID_COUNT, +}; + +static const u32 cpu_process_speedos[][PROCESS_CORNERS_NUM] = { + {315, 366, 420, UINT_MAX}, + {303, 368, 419, UINT_MAX}, + {316, 331, 383, UINT_MAX}, +}; + +static const u32 core_process_speedos[][PROCESS_CORNERS_NUM] = { + {165, 195, 224, UINT_MAX}, + {165, 195, 224, UINT_MAX}, + {165, 195, 224, UINT_MAX}, +}; + +void tegra20_init_speedo_data(void) +{ + u32 reg; + u32 val; + int i; + + BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) != SPEEDO_ID_COUNT); + BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) != SPEEDO_ID_COUNT); + + if (SPEEDO_ID_SELECT_0(tegra_revision)) + tegra_soc_speedo_id = SPEEDO_ID_0; + else if (SPEEDO_ID_SELECT_1(tegra_sku_id)) + tegra_soc_speedo_id = SPEEDO_ID_1; + else + tegra_soc_speedo_id = SPEEDO_ID_2; + + val = 0; + for (i = CPU_SPEEDO_MSBIT; i >= CPU_SPEEDO_LSBIT; i--) { + reg = tegra_spare_fuse(i) | + tegra_spare_fuse(i + CPU_SPEEDO_REDUND_OFFS); + val = (val << 1) | (reg & 0x1); + } + val = val * SPEEDO_MULT; + pr_debug("%s CPU speedo value %u\n", __func__, val); + + for (i = 0; i < (PROCESS_CORNERS_NUM - 1); i++) { + if (val <= cpu_process_speedos[tegra_soc_speedo_id][i]) + break; + } + tegra_cpu_process_id = i; + + val = 0; + for (i = CORE_SPEEDO_MSBIT; i >= CORE_SPEEDO_LSBIT; i--) { + reg = tegra_spare_fuse(i) | + tegra_spare_fuse(i + CORE_SPEEDO_REDUND_OFFS); + val = (val << 1) | (reg & 0x1); + } + val = val * SPEEDO_MULT; + pr_debug("%s Core speedo value %u\n", __func__, val); + + for (i = 0; i < (PROCESS_CORNERS_NUM - 1); i++) { + if (val <= core_process_speedos[tegra_soc_speedo_id][i]) + break; + } + tegra_core_process_id = i; + + pr_info("Tegra20 Soc Speedo ID %d", tegra_soc_speedo_id); +} diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c index 5070d833bdd1..837c7b9ea63b 100644 --- a/arch/arm/mach-tegra/tegra2_emc.c +++ b/arch/arm/mach-tegra/tegra2_emc.c @@ -25,8 +25,6 @@ #include <linux/platform_device.h> #include <linux/platform_data/tegra_emc.h> -#include <mach/iomap.h> - #include "tegra2_emc.h" #include "fuse.h" diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c index e9de5dfd94ec..f5b453f4bf4d 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.c +++ b/arch/arm/mach-tegra/tegra30_clocks.c @@ -31,10 +31,9 @@ #include <asm/clkdev.h> -#include <mach/iomap.h> - #include "clock.h" #include "fuse.h" +#include "iomap.h" #include "tegra_cpu_car.h" #define USE_PLL_LOCK_BITS 0 @@ -792,6 +791,112 @@ struct clk_ops tegra30_twd_ops = { .recalc_rate = tegra30_twd_clk_recalc_rate, }; +/* bus clock functions */ +static int tegra30_bus_clk_is_enabled(struct clk_hw *hw) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val = clk_readl(c->reg); + + c->state = ((val >> c->reg_shift) & BUS_CLK_DISABLE) ? OFF : ON; + return c->state; +} + +static int tegra30_bus_clk_enable(struct clk_hw *hw) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val; + + val = clk_readl(c->reg); + val &= ~(BUS_CLK_DISABLE << c->reg_shift); + clk_writel(val, c->reg); + + return 0; +} + +static void tegra30_bus_clk_disable(struct clk_hw *hw) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val; + + val = clk_readl(c->reg); + val |= BUS_CLK_DISABLE << c->reg_shift; + clk_writel(val, c->reg); +} + +static unsigned long tegra30_bus_clk_recalc_rate(struct clk_hw *hw, + unsigned long prate) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val = clk_readl(c->reg); + u64 rate = prate; + + c->div = ((val >> c->reg_shift) & BUS_CLK_DIV_MASK) + 1; + c->mul = 1; + + if (c->mul != 0 && c->div != 0) { + rate *= c->mul; + rate += c->div - 1; /* round up */ + do_div(rate, c->div); + } + return rate; +} + +static int tegra30_bus_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_tegra *c = to_clk_tegra(hw); + int ret = -EINVAL; + u32 val; + int i; + + val = clk_readl(c->reg); + for (i = 1; i <= 4; i++) { + if (rate == parent_rate / i) { + val &= ~(BUS_CLK_DIV_MASK << c->reg_shift); + val |= (i - 1) << c->reg_shift; + clk_writel(val, c->reg); + c->div = i; + c->mul = 1; + ret = 0; + break; + } + } + + return ret; +} + +static long tegra30_bus_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + unsigned long parent_rate = *prate; + s64 divider; + + if (rate >= parent_rate) + return parent_rate; + + divider = parent_rate; + divider += rate - 1; + do_div(divider, rate); + + if (divider < 0) + return divider; + + if (divider > 4) + divider = 4; + do_div(parent_rate, divider); + + return parent_rate; +} + +struct clk_ops tegra30_bus_ops = { + .is_enabled = tegra30_bus_clk_is_enabled, + .enable = tegra30_bus_clk_enable, + .disable = tegra30_bus_clk_disable, + .set_rate = tegra30_bus_clk_set_rate, + .round_rate = tegra30_bus_clk_round_rate, + .recalc_rate = tegra30_bus_clk_recalc_rate, +}; + /* Blink output functions */ static int tegra30_blink_clk_is_enabled(struct clk_hw *hw) { diff --git a/arch/arm/mach-tegra/tegra30_clocks.h b/arch/arm/mach-tegra/tegra30_clocks.h index f2f88fef6b8b..7a34adb2f72d 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.h +++ b/arch/arm/mach-tegra/tegra30_clocks.h @@ -34,6 +34,7 @@ extern struct clk_ops tegra_clk_out_ops; extern struct clk_ops tegra30_super_ops; extern struct clk_ops tegra30_blink_clk_ops; extern struct clk_ops tegra30_twd_ops; +extern struct clk_ops tegra30_bus_ops; extern struct clk_ops tegra30_periph_clk_ops; extern struct clk_ops tegra30_dsib_clk_ops; extern struct clk_ops tegra_nand_clk_ops; diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c index 3d2e5532a9ea..6942c7add3bb 100644 --- a/arch/arm/mach-tegra/tegra30_clocks_data.c +++ b/arch/arm/mach-tegra/tegra30_clocks_data.c @@ -711,6 +711,50 @@ static struct clk tegra_clk_sclk = { .num_parents = ARRAY_SIZE(mux_sclk), }; +static const char *tegra_hclk_parent_names[] = { + "tegra_sclk", +}; + +static struct clk *tegra_hclk_parents[] = { + &tegra_clk_sclk, +}; + +static struct clk tegra_hclk; +static struct clk_tegra tegra_hclk_hw = { + .hw = { + .clk = &tegra_hclk, + }, + .flags = DIV_BUS, + .reg = 0x30, + .reg_shift = 4, + .max_rate = 378000000, + .min_rate = 12000000, +}; +DEFINE_CLK_TEGRA(hclk, 0, &tegra30_bus_ops, 0, tegra_hclk_parent_names, + tegra_hclk_parents, &tegra_clk_sclk); + +static const char *tegra_pclk_parent_names[] = { + "tegra_hclk", +}; + +static struct clk *tegra_pclk_parents[] = { + &tegra_hclk, +}; + +static struct clk tegra_pclk; +static struct clk_tegra tegra_pclk_hw = { + .hw = { + .clk = &tegra_pclk, + }, + .flags = DIV_BUS, + .reg = 0x30, + .reg_shift = 0, + .max_rate = 167000000, + .min_rate = 12000000, +}; +DEFINE_CLK_TEGRA(pclk, 0, &tegra30_bus_ops, 0, tegra_pclk_parent_names, + tegra_pclk_parents, &tegra_hclk); + static const char *mux_blink[] = { "clk_32k", }; @@ -1254,8 +1298,6 @@ struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("usbd", "utmip-pad", NULL), CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL), CLK_DUPLICATE("usbd", "tegra-otg", NULL), - CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"), - CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"), CLK_DUPLICATE("dsib", "tegradc.0", "dsib"), CLK_DUPLICATE("dsia", "tegradc.1", "dsia"), CLK_DUPLICATE("bsev", "tegra-avp", "bsev"), @@ -1293,6 +1335,9 @@ struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.4", "fast-clk"), + CLK_DUPLICATE("pll_p", "tegradc.0", "parent"), + CLK_DUPLICATE("pll_p", "tegradc.1", "parent"), + CLK_DUPLICATE("pll_d2_out0", "hdmi", "parent"), }; struct clk *tegra_ptr_clks[] = { @@ -1325,6 +1370,8 @@ struct clk *tegra_ptr_clks[] = { &tegra_cml1, &tegra_pciex, &tegra_clk_sclk, + &tegra_hclk, + &tegra_pclk, &tegra_clk_blink, &tegra30_clk_twd, }; diff --git a/arch/arm/mach-tegra/tegra30_speedo.c b/arch/arm/mach-tegra/tegra30_speedo.c new file mode 100644 index 000000000000..125cb16424a6 --- /dev/null +++ b/arch/arm/mach-tegra/tegra30_speedo.c @@ -0,0 +1,292 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kernel.h> +#include <linux/bug.h> + +#include "fuse.h" + +#define CORE_PROCESS_CORNERS_NUM 1 +#define CPU_PROCESS_CORNERS_NUM 6 + +#define FUSE_SPEEDO_CALIB_0 0x114 +#define FUSE_PACKAGE_INFO 0X1FC +#define FUSE_TEST_PROG_VER 0X128 + +#define G_SPEEDO_BIT_MINUS1 58 +#define G_SPEEDO_BIT_MINUS1_R 59 +#define G_SPEEDO_BIT_MINUS2 60 +#define G_SPEEDO_BIT_MINUS2_R 61 +#define LP_SPEEDO_BIT_MINUS1 62 +#define LP_SPEEDO_BIT_MINUS1_R 63 +#define LP_SPEEDO_BIT_MINUS2 64 +#define LP_SPEEDO_BIT_MINUS2_R 65 + +enum { + THRESHOLD_INDEX_0, + THRESHOLD_INDEX_1, + THRESHOLD_INDEX_2, + THRESHOLD_INDEX_3, + THRESHOLD_INDEX_4, + THRESHOLD_INDEX_5, + THRESHOLD_INDEX_6, + THRESHOLD_INDEX_7, + THRESHOLD_INDEX_8, + THRESHOLD_INDEX_9, + THRESHOLD_INDEX_10, + THRESHOLD_INDEX_11, + THRESHOLD_INDEX_COUNT, +}; + +static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = { + {180}, + {170}, + {195}, + {180}, + {168}, + {192}, + {180}, + {170}, + {195}, + {180}, + {180}, + {180}, +}; + +static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = { + {306, 338, 360, 376, UINT_MAX}, + {295, 336, 358, 375, UINT_MAX}, + {325, 325, 358, 375, UINT_MAX}, + {325, 325, 358, 375, UINT_MAX}, + {292, 324, 348, 364, UINT_MAX}, + {324, 324, 348, 364, UINT_MAX}, + {324, 324, 348, 364, UINT_MAX}, + {295, 336, 358, 375, UINT_MAX}, + {358, 358, 358, 358, 397, UINT_MAX}, + {364, 364, 364, 364, 397, UINT_MAX}, + {295, 336, 358, 375, 391, UINT_MAX}, + {295, 336, 358, 375, 391, UINT_MAX}, +}; + +static int threshold_index; +static int package_id; + +static void fuse_speedo_calib(u32 *speedo_g, u32 *speedo_lp) +{ + u32 reg; + int ate_ver; + int bit_minus1; + int bit_minus2; + + reg = tegra_fuse_readl(FUSE_SPEEDO_CALIB_0); + + *speedo_lp = (reg & 0xFFFF) * 4; + *speedo_g = ((reg >> 16) & 0xFFFF) * 4; + + ate_ver = tegra_fuse_readl(FUSE_TEST_PROG_VER); + pr_info("%s: ATE prog ver %d.%d\n", __func__, ate_ver/10, ate_ver%10); + + if (ate_ver >= 26) { + bit_minus1 = tegra_spare_fuse(LP_SPEEDO_BIT_MINUS1); + bit_minus1 |= tegra_spare_fuse(LP_SPEEDO_BIT_MINUS1_R); + bit_minus2 = tegra_spare_fuse(LP_SPEEDO_BIT_MINUS2); + bit_minus2 |= tegra_spare_fuse(LP_SPEEDO_BIT_MINUS2_R); + *speedo_lp |= (bit_minus1 << 1) | bit_minus2; + + bit_minus1 = tegra_spare_fuse(G_SPEEDO_BIT_MINUS1); + bit_minus1 |= tegra_spare_fuse(G_SPEEDO_BIT_MINUS1_R); + bit_minus2 = tegra_spare_fuse(G_SPEEDO_BIT_MINUS2); + bit_minus2 |= tegra_spare_fuse(G_SPEEDO_BIT_MINUS2_R); + *speedo_g |= (bit_minus1 << 1) | bit_minus2; + } else { + *speedo_lp |= 0x3; + *speedo_g |= 0x3; + } +} + +static void rev_sku_to_speedo_ids(int rev, int sku) +{ + switch (rev) { + case TEGRA_REVISION_A01: + tegra_cpu_speedo_id = 0; + tegra_soc_speedo_id = 0; + threshold_index = THRESHOLD_INDEX_0; + break; + case TEGRA_REVISION_A02: + case TEGRA_REVISION_A03: + switch (sku) { + case 0x87: + case 0x82: + tegra_cpu_speedo_id = 1; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_1; + break; + case 0x81: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 2; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_2; + break; + case 2: + tegra_cpu_speedo_id = 4; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_7; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + case 0x80: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 5; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_8; + break; + case 2: + tegra_cpu_speedo_id = 6; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_9; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + case 0x83: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 7; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_10; + break; + case 2: + tegra_cpu_speedo_id = 3; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_3; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + case 0x8F: + tegra_cpu_speedo_id = 8; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_11; + break; + case 0x08: + tegra_cpu_speedo_id = 1; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_4; + break; + case 0x02: + tegra_cpu_speedo_id = 2; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_5; + break; + case 0x04: + tegra_cpu_speedo_id = 3; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_6; + break; + case 0: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 2; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_2; + break; + case 2: + tegra_cpu_speedo_id = 3; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_3; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + default: + pr_warn("Tegra30: Unknown SKU %d\n", sku); + tegra_cpu_speedo_id = 0; + tegra_soc_speedo_id = 0; + threshold_index = THRESHOLD_INDEX_0; + break; + } + break; + default: + pr_warn("Tegra30: Unknown chip rev %d\n", rev); + tegra_cpu_speedo_id = 0; + tegra_soc_speedo_id = 0; + threshold_index = THRESHOLD_INDEX_0; + break; + } +} + +void tegra30_init_speedo_data(void) +{ + u32 cpu_speedo_val; + u32 core_speedo_val; + int i; + + BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) != + THRESHOLD_INDEX_COUNT); + BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) != + THRESHOLD_INDEX_COUNT); + + package_id = tegra_fuse_readl(FUSE_PACKAGE_INFO) & 0x0F; + + rev_sku_to_speedo_ids(tegra_revision, tegra_sku_id); + fuse_speedo_calib(&cpu_speedo_val, &core_speedo_val); + pr_debug("%s CPU speedo value %u\n", __func__, cpu_speedo_val); + pr_debug("%s Core speedo value %u\n", __func__, core_speedo_val); + + for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++) { + if (cpu_speedo_val < cpu_process_speedos[threshold_index][i]) + break; + } + tegra_cpu_process_id = i - 1; + + if (tegra_cpu_process_id == -1) { + pr_warn("Tegra30: CPU speedo value %3d out of range", + cpu_speedo_val); + tegra_cpu_process_id = 0; + tegra_cpu_speedo_id = 1; + } + + for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++) { + if (core_speedo_val < core_process_speedos[threshold_index][i]) + break; + } + tegra_core_process_id = i - 1; + + if (tegra_core_process_id == -1) { + pr_warn("Tegra30: CORE speedo value %3d out of range", + core_speedo_val); + tegra_core_process_id = 0; + tegra_soc_speedo_id = 1; + } + + pr_info("Tegra30: CPU Speedo ID %d, Soc Speedo ID %d", + tegra_cpu_speedo_id, tegra_soc_speedo_id); +} diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index d3b8c8e7368f..6ff503536512 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -31,11 +31,11 @@ #include <asm/smp_twd.h> #include <asm/sched_clock.h> -#include <mach/iomap.h> #include <mach/irqs.h> #include "board.h" #include "clock.h" +#include "iomap.h" #define RTC_SECONDS 0x08 #define RTC_SHADOW_SECONDS 0x0c diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index b8efac4daed8..d8632ebb1eaf 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -82,8 +82,6 @@ static struct map_desc u300_io_desc[] __initdata = { static void __init u300_map_io(void) { iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); - /* We enable a real big DMA buffer if need be. */ - init_consistent_dma_size(SZ_4M); } /* diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index 070629a95625..7adbed5df8a1 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -150,15 +150,6 @@ static struct platform_device snd_soc_mop500 = { }, }; -/* Platform device for Ux500-PCM */ -static struct platform_device ux500_pcm = { - .name = "ux500-pcm", - .id = 0, - .dev = { - .platform_data = NULL, - }, -}; - struct msp_i2s_platform_data msp2_platform_data = { .id = MSP_I2S_2, .msp_i2s_dma_rx = &msp2_dma_rx, @@ -186,10 +177,3 @@ void mop500_audio_init(struct device *parent) db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, &msp3_platform_data); } - -/* Due for removal once the MSP driver has been fully DT:ed. */ -void mop500_of_audio_init(struct device *parent) -{ - pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); - platform_device_register(&ux500_pcm); -} diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c index 8c979770d872..564f57d5d8a7 100644 --- a/arch/arm/mach-ux500/board-mop500-stuib.c +++ b/arch/arm/mach-ux500/board-mop500-stuib.c @@ -162,18 +162,6 @@ static struct bu21013_platform_device tsc_plat_device = { .y_flip = true, }; -static struct bu21013_platform_device tsc_plat2_device = { - .cs_en = bu21013_gpio_board_init, - .cs_dis = bu21013_gpio_board_exit, - .irq_read_val = bu21013_read_pin_val, - .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN), - .touch_x_max = TOUCH_XMAX, - .touch_y_max = TOUCH_YMAX, - .ext_clk = false, - .x_flip = false, - .y_flip = true, -}; - static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = { { I2C_BOARD_INFO("bu21013_tp", 0x5C), @@ -181,21 +169,17 @@ static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = { }, { I2C_BOARD_INFO("bu21013_tp", 0x5D), - .platform_data = &tsc_plat2_device, + .platform_data = &tsc_plat_device, }, }; void __init mop500_stuib_init(void) { - if (machine_is_hrefv60()) { + if (machine_is_hrefv60()) tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO; - tsc_plat2_device.cs_pin = HREFV60_TOUCH_RST_GPIO; - } else { + else tsc_plat_device.cs_pin = GPIO_BU21013_CS; - tsc_plat2_device.cs_pin = GPIO_BU21013_CS; - - } mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib, ARRAY_SIZE(mop500_i2c0_devices_stuib)); diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 416d436111f2..daa4237ac0dc 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -33,8 +33,6 @@ #include <linux/smsc911x.h> #include <linux/gpio_keys.h> #include <linux/delay.h> -#include <linux/of.h> -#include <linux/of_platform.h> #include <linux/leds.h> #include <linux/pinctrl/consumer.h> @@ -464,7 +462,7 @@ static struct stedma40_chan_cfg ssp0_dma_cfg_tx = { }; #endif -static struct pl022_ssp_controller ssp0_plat = { +struct pl022_ssp_controller ssp0_plat = { .bus_id = 0, #ifdef CONFIG_STE_DMA40 .enable_dma = 1, @@ -541,7 +539,7 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = { }; #endif -static struct amba_pl011_data uart0_plat = { +struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, @@ -549,7 +547,7 @@ static struct amba_pl011_data uart0_plat = { #endif }; -static struct amba_pl011_data uart1_plat = { +struct amba_pl011_data uart1_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart1_dma_cfg_rx, @@ -557,7 +555,7 @@ static struct amba_pl011_data uart1_plat = { #endif }; -static struct amba_pl011_data uart2_plat = { +struct amba_pl011_data uart2_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart2_dma_cfg_rx, @@ -618,8 +616,6 @@ static void __init mop500_init_machine(void) /* This board has full regulator constraints */ regulator_has_full_constraints(); - - mop500_uib_init(); } static void __init snowball_init_machine(void) @@ -684,8 +680,6 @@ static void __init hrefv60_init_machine(void) /* This board has full regulator constraints */ regulator_has_full_constraints(); - - mop500_uib_init(); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") @@ -721,135 +715,5 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") .timer = &ux500_timer, .handle_irq = gic_handle_irq, .init_machine = snowball_init_machine, - .init_late = ux500_init_late, -MACHINE_END - -#ifdef CONFIG_MACH_UX500_DT - -struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { - /* Requires call-back bindings. */ - OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), - /* Requires DMA and call-back bindings. */ - OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), - OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat), - OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat), - /* Requires DMA bindings. */ - OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), - OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), - OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), - OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data), - OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), - /* Requires clock name bindings. */ - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), - /* Requires device name bindings. */ - OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL), - /* Requires clock name and DMA bindings. */ - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, - "ux500-msp-i2s.0", &msp0_platform_data), - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, - "ux500-msp-i2s.1", &msp1_platform_data), - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000, - "ux500-msp-i2s.2", &msp2_platform_data), - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, - "ux500-msp-i2s.3", &msp3_platform_data), - {}, -}; - -static const struct of_device_id u8500_local_bus_nodes[] = { - /* only create devices below soc node */ - { .compatible = "stericsson,db8500", }, - { .compatible = "stericsson,db8500-prcmu", }, - { .compatible = "simple-bus"}, - { }, -}; - -static void __init u8500_init_machine(void) -{ - struct device *parent = NULL; - int i2c0_devs; - int i; - - /* Pinmaps must be in place before devices register */ - if (of_machine_is_compatible("st-ericsson,mop500")) - mop500_pinmaps_init(); - else if (of_machine_is_compatible("calaosystems,snowball-a9500")) - snowball_pinmaps_init(); - else if (of_machine_is_compatible("st-ericsson,hrefv60+")) - hrefv60_pinmaps_init(); - - parent = u8500_of_init_devices(); - - for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) - mop500_platform_devs[i]->dev.parent = parent; - - /* automatically probe child nodes of db8500 device */ - of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent); - - if (of_machine_is_compatible("st-ericsson,mop500")) { - mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; - - platform_add_devices(mop500_platform_devs, - ARRAY_SIZE(mop500_platform_devs)); - - mop500_sdi_init(parent); - mop500_audio_init(parent); - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); - i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); - i2c_register_board_info(2, mop500_i2c2_devices, - ARRAY_SIZE(mop500_i2c2_devices)); - - mop500_uib_init(); - - } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { - mop500_of_audio_init(parent); - } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { - /* - * The HREFv60 board removed a GPIO expander and routed - * all these GPIO pins to the internal GPIO controller - * instead. - */ - mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - platform_add_devices(mop500_platform_devs, - ARRAY_SIZE(mop500_platform_devs)); - - mop500_uib_init(); - } - - /* This board has full regulator constraints */ - regulator_has_full_constraints(); -} - -static const char * u8500_dt_board_compat[] = { - "calaosystems,snowball-a9500", - "st-ericsson,hrefv60+", - "st-ericsson,u8500", - "st-ericsson,mop500", - NULL, -}; - - -DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)") - .smp = smp_ops(ux500_smp_ops), - .map_io = u8500_map_io, - .init_irq = ux500_init_irq, - /* we re-use nomadik timer here */ - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, - .init_machine = u8500_init_machine, - .init_late = ux500_init_late, - .dt_compat = u8500_dt_board_compat, + .init_late = NULL, MACHINE_END -#endif diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index aca39a68712a..eaa605f5d90d 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -89,6 +89,10 @@ extern struct msp_i2s_platform_data msp1_platform_data; extern struct msp_i2s_platform_data msp2_platform_data; extern struct msp_i2s_platform_data msp3_platform_data; extern struct arm_pmu_platdata db8500_pmu_platdata; +extern struct amba_pl011_data uart0_plat; +extern struct amba_pl011_data uart1_plat; +extern struct amba_pl011_data uart2_plat; +extern struct pl022_ssp_controller ssp0_plat; extern void mop500_sdi_init(struct device *parent); extern void snowball_sdi_init(struct device *parent); @@ -100,14 +104,8 @@ void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); void mop500_audio_init(struct device *parent); -/* Due for removal once the MSP driver has been fully DT:ed. */ -void mop500_of_audio_init(struct device *parent); int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, unsigned n); - -/* TODO: Once all pieces are DT:ed, remove completely. */ -struct device * __init u8500_of_init_devices(void); - #endif diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index bcdfe6b1d453..4c6ce012daef 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -17,9 +17,15 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/dbx500-prcmu.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/regulator/machine.h> #include <asm/pmu.h> #include <asm/mach/map.h> +#include <asm/mach/arch.h> +#include <asm/hardware/gic.h> #include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -29,6 +35,7 @@ #include "devices-db8500.h" #include "ste-dma40-db8500.h" +#include "board-mop500.h" /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_uart_io_desc[] __initdata = { @@ -215,7 +222,7 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); platform_device_register_data(parent, - "cpufreq-u8500", -1, NULL, 0); + "cpufreq-ux500", -1, NULL, 0); for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; @@ -227,17 +234,17 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) return parent; } +#ifdef CONFIG_MACH_UX500_DT + /* TODO: Once all pieces are DT:ed, remove completely. */ -struct device * __init u8500_of_init_devices(void) +static struct device * __init u8500_of_init_devices(void) { - struct device *parent; - - parent = db8500_soc_device_init(); + struct device *parent = db8500_soc_device_init(); db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); platform_device_register_data(parent, - "cpufreq-u8500", -1, NULL, 0); + "cpufreq-ux500", -1, NULL, 0); u8500_dma40_device.dev.parent = parent; @@ -251,3 +258,95 @@ struct device * __init u8500_of_init_devices(void) return parent; } + +static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { + /* Requires call-back bindings. */ + OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), + /* Requires DMA bindings. */ + OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), + OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat), + OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat), + OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), + OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), + /* Requires clock name bindings. */ + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), + /* Requires device name bindings. */ + OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL), + /* Requires clock name and DMA bindings. */ + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, + "ux500-msp-i2s.0", &msp0_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, + "ux500-msp-i2s.1", &msp1_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000, + "ux500-msp-i2s.2", &msp2_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, + "ux500-msp-i2s.3", &msp3_platform_data), + {}, +}; + +static const struct of_device_id u8500_local_bus_nodes[] = { + /* only create devices below soc node */ + { .compatible = "stericsson,db8500", }, + { .compatible = "stericsson,db8500-prcmu", }, + { .compatible = "simple-bus"}, + { }, +}; + +static void __init u8500_init_machine(void) +{ + struct device *parent = NULL; + + /* Pinmaps must be in place before devices register */ + if (of_machine_is_compatible("st-ericsson,mop500")) + mop500_pinmaps_init(); + else if (of_machine_is_compatible("calaosystems,snowball-a9500")) + snowball_pinmaps_init(); + else if (of_machine_is_compatible("st-ericsson,hrefv60+")) + hrefv60_pinmaps_init(); + else if (of_machine_is_compatible("st-ericsson,ccu9540")) {} + /* TODO: Add pinmaps for ccu9540 board. */ + + /* TODO: Export SoC, USB, cpu-freq and DMA40 */ + parent = u8500_of_init_devices(); + + /* automatically probe child nodes of db8500 device */ + of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent); +} + +static const char * stericsson_dt_platform_compat[] = { + "st-ericsson,u8500", + "st-ericsson,u8540", + "st-ericsson,u9500", + "st-ericsson,u9540", + NULL, +}; + +DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)") + .smp = smp_ops(ux500_smp_ops), + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + /* we re-use nomadik timer here */ + .timer = &ux500_timer, + .handle_irq = gic_handle_irq, + .init_machine = u8500_init_machine, + .init_late = NULL, + .dt_compat = stericsson_dt_platform_compat, +MACHINE_END + +#endif diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 1f3fbc2bb776..721e7b4275f3 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -26,6 +26,8 @@ #include <mach/setup.h> #include <mach/devices.h> +#include "board-mop500.h" + void __iomem *_PRCMU_BASE; /* @@ -82,6 +84,7 @@ void __init ux500_init_irq(void) void __init ux500_init_late(void) { + mop500_uib_init(); } static const char * __init ux500_get_machine(void) diff --git a/arch/arm/mach-vt8500/include/mach/hardware.h b/arch/arm/mach-vt8500/include/mach/hardware.h deleted file mode 100644 index db4163f72c39..000000000000 --- a/arch/arm/mach-vt8500/include/mach/hardware.h +++ /dev/null @@ -1,12 +0,0 @@ -/* arch/arm/mach-vt8500/include/mach/hardware.h - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ diff --git a/arch/arm/mach-vt8500/include/mach/i8042.h b/arch/arm/mach-vt8500/include/mach/i8042.h deleted file mode 100644 index cd7143cad6f3..000000000000 --- a/arch/arm/mach-vt8500/include/mach/i8042.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-vt8500/include/mach/i8042.h - * - * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -extern unsigned long wmt_i8042_base __initdata; -extern int wmt_i8042_kbd_irq; -extern int wmt_i8042_aux_irq; diff --git a/arch/arm/mach-vt8500/include/mach/restart.h b/arch/arm/mach-vt8500/include/mach/restart.h deleted file mode 100644 index 738979518acb..000000000000 --- a/arch/arm/mach-vt8500/include/mach/restart.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-vt8500/restart.h - * - * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -void vt8500_setup_restart(void); -void vt8500_restart(char mode, const char *cmd); diff --git a/arch/arm/mach-vt8500/timer.c b/arch/arm/mach-vt8500/timer.c index 050e1833f2d0..3dd21a47881f 100644 --- a/arch/arm/mach-vt8500/timer.c +++ b/arch/arm/mach-vt8500/timer.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-vt8500/timer_dt.c + * arch/arm/mach-vt8500/timer.c * * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 8d3871f110a5..a5bd28692b06 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -31,8 +31,6 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <mach/restart.h> - #include "common.h" #define LEGACY_GPIO_BASE 0xD8110000 diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index ab5cfddc0d7b..79bf5fb4dad3 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -19,19 +19,21 @@ #include <linux/cpumask.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/clk/zynq.h> +#include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/of.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/time.h> #include <asm/mach-types.h> #include <asm/page.h> #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> #include <mach/zynq_soc.h> -#include <mach/clkdev.h> #include "common.h" static struct of_device_id zynq_of_bus_ids[] __initdata = { @@ -45,22 +47,25 @@ static struct of_device_id zynq_of_bus_ids[] __initdata = { */ static void __init xilinx_init_machine(void) { -#ifdef CONFIG_CACHE_L2X0 /* * 64KB way size, 8-way associativity, parity disabled */ - l2x0_init(PL310_L2CC_BASE, 0x02060000, 0xF0F0FFFF); -#endif + l2x0_of_init(0x02060000, 0xF0F0FFFF); of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL); } +static struct of_device_id irq_match[] __initdata = { + { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, + { } +}; + /** * xilinx_irq_init() - Interrupt controller initialization for the GIC. */ static void __init xilinx_irq_init(void) { - gic_init(0, 29, SCU_GIC_DIST_BASE, SCU_GIC_CPU_BASE); + of_irq_init(irq_match); } /* The minimum devices needed to be mapped before the VM system is up and @@ -71,31 +76,47 @@ static struct map_desc io_desc[] __initdata = { { .virtual = TTC0_VIRT, .pfn = __phys_to_pfn(TTC0_PHYS), - .length = SZ_4K, + .length = TTC0_SIZE, .type = MT_DEVICE, }, { .virtual = SCU_PERIPH_VIRT, .pfn = __phys_to_pfn(SCU_PERIPH_PHYS), - .length = SZ_8K, - .type = MT_DEVICE, - }, { - .virtual = PL310_L2CC_VIRT, - .pfn = __phys_to_pfn(PL310_L2CC_PHYS), - .length = SZ_4K, + .length = SCU_PERIPH_SIZE, .type = MT_DEVICE, }, #ifdef CONFIG_DEBUG_LL { - .virtual = UART0_VIRT, - .pfn = __phys_to_pfn(UART0_PHYS), - .length = SZ_4K, + .virtual = LL_UART_VADDR, + .pfn = __phys_to_pfn(LL_UART_PADDR), + .length = UART_SIZE, .type = MT_DEVICE, }, #endif }; +static void __init xilinx_zynq_timer_init(void) +{ + struct device_node *np; + void __iomem *slcr; + + np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr"); + slcr = of_iomap(np, 0); + WARN_ON(!slcr); + + xilinx_zynq_clocks_init(slcr); + + xttcpss_timer_init(); +} + +/* + * Instantiate and initialize the system timer structure + */ +static struct sys_timer xttcpss_sys_timer = { + .init = xilinx_zynq_timer_init, +}; + /** * xilinx_map_io() - Create memory mappings needed for early I/O. */ @@ -105,7 +126,8 @@ static void __init xilinx_map_io(void) } static const char *xilinx_dt_match[] = { - "xlnx,zynq-ep107", + "xlnx,zynq-zc702", + "xlnx,zynq-7000", NULL }; diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index a009644a1555..954b91c13c91 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -17,8 +17,6 @@ #ifndef __MACH_ZYNQ_COMMON_H__ #define __MACH_ZYNQ_COMMON_H__ -#include <asm/mach/time.h> - -extern struct sys_timer xttcpss_sys_timer; +void __init xttcpss_timer_init(void); #endif diff --git a/arch/arm/mach-zynq/include/mach/clkdev.h b/arch/arm/mach-zynq/include/mach/clkdev.h deleted file mode 100644 index c6e73d81a459..000000000000 --- a/arch/arm/mach-zynq/include/mach/clkdev.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-zynq/include/mach/clkdev.h - * - * Copyright (C) 2011 Xilinx, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#include <plat/clock.h> - -struct clk { - unsigned long rate; - const struct clk_ops *ops; - const struct icst_params *params; - void __iomem *vcoreg; -}; - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h index d0d3f8fb06dd..5ebbd8e6eeee 100644 --- a/arch/arm/mach-zynq/include/mach/zynq_soc.h +++ b/arch/arm/mach-zynq/include/mach/zynq_soc.h @@ -15,34 +15,39 @@ #ifndef __MACH_XILINX_SOC_H__ #define __MACH_XILINX_SOC_H__ +#include <asm/pgtable.h> + #define PERIPHERAL_CLOCK_RATE 2500000 -/* For now, all mappings are flat (physical = virtual) +/* Static peripheral mappings are mapped at the top of the vmalloc region. The + * early uart mapping causes intermediate problems/failure at certain + * addresses, including the very top of the vmalloc region. Map it at an + * address that is known to work. */ -#define UART0_PHYS 0xE0000000 -#define UART0_VIRT UART0_PHYS - -#define TTC0_PHYS 0xF8001000 -#define TTC0_VIRT TTC0_PHYS - -#define PL310_L2CC_PHYS 0xF8F02000 -#define PL310_L2CC_VIRT PL310_L2CC_PHYS +#define UART0_PHYS 0xE0000000 +#define UART1_PHYS 0xE0001000 +#define UART_SIZE SZ_4K +#define UART_VIRT 0xF0001000 + +#define TTC0_PHYS 0xF8001000 +#define TTC0_SIZE SZ_4K +#define TTC0_VIRT (VMALLOC_END - TTC0_SIZE) + +#define SCU_PERIPH_PHYS 0xF8F00000 +#define SCU_PERIPH_SIZE SZ_8K +#define SCU_PERIPH_VIRT (TTC0_VIRT - SCU_PERIPH_SIZE) + +#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1) +# define LL_UART_PADDR UART1_PHYS +#else +# define LL_UART_PADDR UART0_PHYS +#endif -#define SCU_PERIPH_PHYS 0xF8F00000 -#define SCU_PERIPH_VIRT SCU_PERIPH_PHYS +#define LL_UART_VADDR UART_VIRT /* The following are intended for the devices that are mapped early */ #define TTC0_BASE IOMEM(TTC0_VIRT) #define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT) -#define SCU_GIC_CPU_BASE (SCU_PERIPH_BASE + 0x100) -#define SCU_GIC_DIST_BASE (SCU_PERIPH_BASE + 0x1000) -#define PL310_L2CC_BASE IOMEM(PL310_L2CC_VIRT) - -/* - * Mandatory for CONFIG_LL_DEBUG, UART is mapped virtual = physical - */ -#define LL_UART_PADDR UART0_PHYS -#define LL_UART_VADDR UART0_VIRT #endif diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c index c2c96cc7d6e7..9662306aa12f 100644 --- a/arch/arm/mach-zynq/timer.c +++ b/arch/arm/mach-zynq/timer.c @@ -23,32 +23,15 @@ #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/slab.h> +#include <linux/clk-provider.h> -#include <asm/mach/time.h> #include <mach/zynq_soc.h> #include "common.h" -#define IRQ_TIMERCOUNTER0 42 - -/* - * This driver configures the 2 16-bit count-up timers as follows: - * - * T1: Timer 1, clocksource for generic timekeeping - * T2: Timer 2, clockevent source for hrtimers - * T3: Timer 3, <unused> - * - * The input frequency to the timer module for emulation is 2.5MHz which is - * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32, - * the timers are clocked at 78.125KHz (12.8 us resolution). - * - * The input frequency to the timer module in silicon will be 200MHz. With the - * pre-scaler of 32, the timers are clocked at 6.25MHz (160ns resolution). - */ -#define XTTCPSS_CLOCKSOURCE 0 /* Timer 1 as a generic timekeeping */ -#define XTTCPSS_CLOCKEVENT 1 /* Timer 2 as a clock event */ - -#define XTTCPSS_TIMER_BASE TTC0_BASE -#define XTTCPCC_EVENT_TIMER_IRQ (IRQ_TIMERCOUNTER0 + 1) /* * Timer Register Offset Definitions of Timer 1, Increment base address by 4 * and use same offsets for Timer 2 @@ -65,9 +48,14 @@ #define XTTCPSS_CNT_CNTRL_DISABLE_MASK 0x1 -/* Setup the timers to use pre-scaling */ - -#define TIMER_RATE (PERIPHERAL_CLOCK_RATE / 32) +/* Setup the timers to use pre-scaling, using a fixed value for now that will + * work across most input frequency, but it may need to be more dynamic + */ +#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */ +#define PRESCALE 2048 /* The exponent must match this */ +#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1) +#define CLK_CNTRL_PRESCALE_EN 1 +#define CNT_CNTRL_RESET (1<<4) /** * struct xttcpss_timer - This definition defines local timer structure @@ -75,11 +63,25 @@ * @base_addr: Base address of timer **/ struct xttcpss_timer { - void __iomem *base_addr; + void __iomem *base_addr; }; -static struct xttcpss_timer timers[2]; -static struct clock_event_device xttcpss_clockevent; +struct xttcpss_timer_clocksource { + struct xttcpss_timer xttc; + struct clocksource cs; +}; + +#define to_xttcpss_timer_clksrc(x) \ + container_of(x, struct xttcpss_timer_clocksource, cs) + +struct xttcpss_timer_clockevent { + struct xttcpss_timer xttc; + struct clock_event_device ce; + struct clk *clk; +}; + +#define to_xttcpss_timer_clkevent(x) \ + container_of(x, struct xttcpss_timer_clockevent, ce) /** * xttcpss_set_interval - Set the timer interval value @@ -101,7 +103,7 @@ static void xttcpss_set_interval(struct xttcpss_timer *timer, /* Reset the counter (0x10) so that it starts from 0, one-shot mode makes this needed for timing to be right. */ - ctrl_reg |= 0x10; + ctrl_reg |= CNT_CNTRL_RESET; ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK; __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); } @@ -116,90 +118,31 @@ static void xttcpss_set_interval(struct xttcpss_timer *timer, **/ static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id) { - struct clock_event_device *evt = &xttcpss_clockevent; - struct xttcpss_timer *timer = dev_id; + struct xttcpss_timer_clockevent *xttce = dev_id; + struct xttcpss_timer *timer = &xttce->xttc; /* Acknowledge the interrupt and call event handler */ __raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET), timer->base_addr + XTTCPSS_ISR_OFFSET); - evt->event_handler(evt); + xttce->ce.event_handler(&xttce->ce); return IRQ_HANDLED; } -static struct irqaction event_timer_irq = { - .name = "xttcpss clockevent", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = xttcpss_clock_event_interrupt, -}; - /** - * xttcpss_timer_hardware_init - Initialize the timer hardware - * - * Initialize the hardware to start the clock source, get the clock - * event timer ready to use, and hook up the interrupt. - **/ -static void __init xttcpss_timer_hardware_init(void) -{ - /* Setup the clock source counter to be an incrementing counter - * with no interrupt and it rolls over at 0xFFFF. Pre-scale - it by 32 also. Let it start running now. - */ - timers[XTTCPSS_CLOCKSOURCE].base_addr = XTTCPSS_TIMER_BASE; - - __raw_writel(0x0, timers[XTTCPSS_CLOCKSOURCE].base_addr + - XTTCPSS_IER_OFFSET); - __raw_writel(0x9, timers[XTTCPSS_CLOCKSOURCE].base_addr + - XTTCPSS_CLK_CNTRL_OFFSET); - __raw_writel(0x10, timers[XTTCPSS_CLOCKSOURCE].base_addr + - XTTCPSS_CNT_CNTRL_OFFSET); - - /* Setup the clock event timer to be an interval timer which - * is prescaled by 32 using the interval interrupt. Leave it - * disabled for now. - */ - - timers[XTTCPSS_CLOCKEVENT].base_addr = XTTCPSS_TIMER_BASE + 4; - - __raw_writel(0x23, timers[XTTCPSS_CLOCKEVENT].base_addr + - XTTCPSS_CNT_CNTRL_OFFSET); - __raw_writel(0x9, timers[XTTCPSS_CLOCKEVENT].base_addr + - XTTCPSS_CLK_CNTRL_OFFSET); - __raw_writel(0x1, timers[XTTCPSS_CLOCKEVENT].base_addr + - XTTCPSS_IER_OFFSET); - - /* Setup IRQ the clock event timer */ - event_timer_irq.dev_id = &timers[XTTCPSS_CLOCKEVENT]; - setup_irq(XTTCPCC_EVENT_TIMER_IRQ, &event_timer_irq); -} - -/** - * __raw_readl_cycles - Reads the timer counter register + * __xttc_clocksource_read - Reads the timer counter register * * returns: Current timer counter register value **/ -static cycle_t __raw_readl_cycles(struct clocksource *cs) +static cycle_t __xttc_clocksource_read(struct clocksource *cs) { - struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKSOURCE]; + struct xttcpss_timer *timer = &to_xttcpss_timer_clksrc(cs)->xttc; return (cycle_t)__raw_readl(timer->base_addr + XTTCPSS_COUNT_VAL_OFFSET); } - -/* - * Instantiate and initialize the clock source structure - */ -static struct clocksource clocksource_xttcpss = { - .name = "xttcpss_timer1", - .rating = 200, /* Reasonable clock source */ - .read = __raw_readl_cycles, - .mask = CLOCKSOURCE_MASK(16), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - - /** * xttcpss_set_next_event - Sets the time interval for next event * @@ -211,7 +154,8 @@ static struct clocksource clocksource_xttcpss = { static int xttcpss_set_next_event(unsigned long cycles, struct clock_event_device *evt) { - struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT]; + struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt); + struct xttcpss_timer *timer = &xttce->xttc; xttcpss_set_interval(timer, cycles); return 0; @@ -226,12 +170,15 @@ static int xttcpss_set_next_event(unsigned long cycles, static void xttcpss_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { - struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT]; + struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt); + struct xttcpss_timer *timer = &xttce->xttc; u32 ctrl_reg; switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - xttcpss_set_interval(timer, TIMER_RATE / HZ); + xttcpss_set_interval(timer, + DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk), + PRESCALE * HZ)); break; case CLOCK_EVT_MODE_ONESHOT: case CLOCK_EVT_MODE_UNUSED: @@ -252,15 +199,106 @@ static void xttcpss_set_mode(enum clock_event_mode mode, } } -/* - * Instantiate and initialize the clock event structure - */ -static struct clock_event_device xttcpss_clockevent = { - .name = "xttcpss_timer2", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = xttcpss_set_next_event, - .set_mode = xttcpss_set_mode, - .rating = 200, +static void __init zynq_ttc_setup_clocksource(struct device_node *np, + void __iomem *base) +{ + struct xttcpss_timer_clocksource *ttccs; + struct clk *clk; + int err; + u32 reg; + + ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL); + if (WARN_ON(!ttccs)) + return; + + err = of_property_read_u32(np, "reg", ®); + if (WARN_ON(err)) + return; + + clk = of_clk_get_by_name(np, "cpu_1x"); + if (WARN_ON(IS_ERR(clk))) + return; + + err = clk_prepare_enable(clk); + if (WARN_ON(err)) + return; + + ttccs->xttc.base_addr = base + reg * 4; + + ttccs->cs.name = np->name; + ttccs->cs.rating = 200; + ttccs->cs.read = __xttc_clocksource_read; + ttccs->cs.mask = CLOCKSOURCE_MASK(16); + ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS; + + __raw_writel(0x0, ttccs->xttc.base_addr + XTTCPSS_IER_OFFSET); + __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, + ttccs->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET); + __raw_writel(CNT_CNTRL_RESET, + ttccs->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + + err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE); + if (WARN_ON(err)) + return; +} + +static void __init zynq_ttc_setup_clockevent(struct device_node *np, + void __iomem *base) +{ + struct xttcpss_timer_clockevent *ttcce; + int err, irq; + u32 reg; + + ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL); + if (WARN_ON(!ttcce)) + return; + + err = of_property_read_u32(np, "reg", ®); + if (WARN_ON(err)) + return; + + ttcce->xttc.base_addr = base + reg * 4; + + ttcce->clk = of_clk_get_by_name(np, "cpu_1x"); + if (WARN_ON(IS_ERR(ttcce->clk))) + return; + + err = clk_prepare_enable(ttcce->clk); + if (WARN_ON(err)) + return; + + irq = irq_of_parse_and_map(np, 0); + if (WARN_ON(!irq)) + return; + + ttcce->ce.name = np->name; + ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + ttcce->ce.set_next_event = xttcpss_set_next_event; + ttcce->ce.set_mode = xttcpss_set_mode; + ttcce->ce.rating = 200; + ttcce->ce.irq = irq; + + __raw_writel(0x23, ttcce->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, + ttcce->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET); + __raw_writel(0x1, ttcce->xttc.base_addr + XTTCPSS_IER_OFFSET); + + err = request_irq(irq, xttcpss_clock_event_interrupt, IRQF_TIMER, + np->name, ttcce); + if (WARN_ON(err)) + return; + + clockevents_config_and_register(&ttcce->ce, + clk_get_rate(ttcce->clk) / PRESCALE, + 1, 0xfffe); +} + +static const __initconst struct of_device_id zynq_ttc_match[] = { + { .compatible = "xlnx,ttc-counter-clocksource", + .data = zynq_ttc_setup_clocksource, }, + { .compatible = "xlnx,ttc-counter-clockevent", + .data = zynq_ttc_setup_clockevent, }, + {} }; /** @@ -269,30 +307,27 @@ static struct clock_event_device xttcpss_clockevent = { * Initializes the timer hardware and register the clock source and clock event * timers with Linux kernal timer framework **/ -static void __init xttcpss_timer_init(void) +void __init xttcpss_timer_init(void) { - xttcpss_timer_hardware_init(); - clocksource_register_hz(&clocksource_xttcpss, TIMER_RATE); - - /* Calculate the parameters to allow the clockevent to operate using - integer math - */ - clockevents_calc_mult_shift(&xttcpss_clockevent, TIMER_RATE, 4); - - xttcpss_clockevent.max_delta_ns = - clockevent_delta2ns(0xfffe, &xttcpss_clockevent); - xttcpss_clockevent.min_delta_ns = - clockevent_delta2ns(1, &xttcpss_clockevent); - - /* Indicate that clock event is on 1st CPU as SMP boot needs it */ - - xttcpss_clockevent.cpumask = cpumask_of(0); - clockevents_register_device(&xttcpss_clockevent); + struct device_node *np; + + for_each_compatible_node(np, NULL, "xlnx,ttc") { + struct device_node *np_chld; + void __iomem *base; + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + for_each_available_child_of_node(np, np_chld) { + int (*cb)(struct device_node *np, void __iomem *base); + const struct of_device_id *match; + + match = of_match_node(zynq_ttc_match, np_chld); + if (match) { + cb = match->data; + cb(np_chld, base); + } + } + } } - -/* - * Instantiate and initialize the system timer structure - */ -struct sys_timer xttcpss_sys_timer = { - .init = xttcpss_timer_init, -}; diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig deleted file mode 100644 index 88e1e2e7a20d..000000000000 --- a/arch/arm/plat-mxc/Kconfig +++ /dev/null @@ -1,89 +0,0 @@ -if ARCH_MXC - -source "arch/arm/plat-mxc/devices/Kconfig" - -menu "Freescale MXC Implementations" - -choice - prompt "Freescale CPU family:" - default ARCH_IMX_V6_V7 - -config ARCH_IMX_V4_V5 - bool "i.MX1, i.MX21, i.MX25, i.MX27" - select ARM_PATCH_PHYS_VIRT - select AUTO_ZRELADDR if !ZBOOT_ROM - help - This enables support for systems based on the Freescale i.MX ARMv4 - and ARMv5 SoCs - -config ARCH_IMX_V6_V7 - bool "i.MX3, i.MX5, i.MX6" - select ARM_PATCH_PHYS_VIRT - select AUTO_ZRELADDR if !ZBOOT_ROM - select MIGHT_HAVE_CACHE_L2X0 - help - This enables support for systems based on the Freescale i.MX3, i.MX5 - and i.MX6 family. - -endchoice - -source "arch/arm/mach-imx/Kconfig" - -endmenu - -config MXC_IRQ_PRIOR - bool "Use IRQ priority" - help - Select this if you want to use prioritized IRQ handling. - This feature prevents higher priority ISR to be interrupted - by lower priority IRQ even IRQF_DISABLED flag is not set. - This may be useful in embedded applications, where are strong - requirements for timing. - Say N here, unless you have a specialized requirement. - -config MXC_TZIC - bool - -config MXC_AVIC - bool - -config MXC_DEBUG_BOARD - bool "Enable MXC debug board(for 3-stack)" - help - The debug board is an integral part of the MXC 3-stack(PDK) - platforms, it can be attached or removed from the peripheral - board. On debug board, several debug devices(ethernet, UART, - buttons, LEDs and JTAG) are implemented. Between the MCU and - these devices, a CPLD is added as a bridge which performs - data/address de-multiplexing and decode, signal level shift, - interrupt control and various board functions. - -config HAVE_EPIT - bool - -config MXC_USE_EPIT - bool "Use EPIT instead of GPT" - depends on HAVE_EPIT - help - Use EPIT as the system timer on systems that have it. Normally you - don't have a reason to do so as the EPIT has the same features and - uses the same clocks as the GPT. Anyway, on some systems the GPT - may be in use for other purposes. - -config MXC_ULPI - bool - -config ARCH_HAS_RNGA - bool - -config IMX_HAVE_IOMUX_V1 - bool - -config ARCH_MXC_IOMUX_V3 - bool - -config IRAM_ALLOC - bool - select GENERIC_ALLOCATOR - -endif diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile deleted file mode 100644 index 149237e24850..000000000000 --- a/arch/arm/plat-mxc/Makefile +++ /dev/null @@ -1,24 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Common support -obj-y := time.o devices.o cpu.o system.o irq-common.o - -obj-$(CONFIG_MXC_TZIC) += tzic.o -obj-$(CONFIG_MXC_AVIC) += avic.o - -obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o -obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o -obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o -obj-$(CONFIG_MXC_ULPI) += ulpi.o -obj-$(CONFIG_MXC_USE_EPIT) += epit.o -obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o -obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o -obj-$(CONFIG_CPU_IDLE) += cpuidle.o -ifdef CONFIG_SND_IMX_SOC -obj-y += ssi-fiq.o -obj-y += ssi-fiq-ksym.o -endif - -obj-y += devices/ diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S deleted file mode 100644 index 761e45f9456f..000000000000 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ /dev/null @@ -1,51 +0,0 @@ -/* arch/arm/mach-imx/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <mach/hardware.h> - -#ifdef CONFIG_DEBUG_IMX1_UART -#define UART_PADDR MX1_UART1_BASE_ADDR -#elif defined (CONFIG_DEBUG_IMX25_UART) -#define UART_PADDR MX25_UART1_BASE_ADDR -#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART) -#define UART_PADDR MX2x_UART1_BASE_ADDR -#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART) -#define UART_PADDR MX3x_UART1_BASE_ADDR -#elif defined (CONFIG_DEBUG_IMX51_UART) -#define UART_PADDR MX51_UART1_BASE_ADDR -#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART) -#define UART_PADDR MX53_UART1_BASE_ADDR -#elif defined (CONFIG_DEBUG_IMX6Q_UART2) -#define UART_PADDR MX6Q_UART2_BASE_ADDR -#elif defined (CONFIG_DEBUG_IMX6Q_UART4) -#define UART_PADDR MX6Q_UART4_BASE_ADDR -#endif - -#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) - - .macro addruart, rp, rv, tmp - ldr \rp, =UART_PADDR @ physical - ldr \rv, =UART_VADDR @ virtual - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x40] @ TXDATA - .endm - - .macro waituart,rd,rx - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x98] @ SR2 - tst \rd, #1 << 3 @ TXDC - beq 1002b @ wait until transmit done - .endm diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h deleted file mode 100644 index d73f5e8ea9cb..000000000000 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_IRQS_H__ -#define __ASM_ARCH_MXC_IRQS_H__ - -extern int imx_irq_set_priority(unsigned char irq, unsigned char prio); - -/* all normal IRQs can be FIQs */ -#define FIQ_START 0 -/* switch between IRQ and FIQ */ -extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type); - -#endif /* __ASM_ARCH_MXC_IRQS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h deleted file mode 100644 index 477971b00930..000000000000 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * arch/arm/plat-mxc/include/mach/uncompress.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__ -#define __ASM_ARCH_MXC_UNCOMPRESS_H__ - -#define __MXC_BOOT_UNCOMPRESS - -#include <asm/mach-types.h> - -unsigned long uart_base; - -#define UART(x) (*(volatile unsigned long *)(uart_base + (x))) - -#define USR2 0x98 -#define USR2_TXFE (1<<14) -#define TXR 0x40 -#define UCR1 0x80 -#define UCR1_UARTEN 1 - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ - -static void putc(int ch) -{ - if (!uart_base) - return; - if (!(UART(UCR1) & UCR1_UARTEN)) - return; - - while (!(UART(USR2) & USR2_TXFE)) - barrier(); - - UART(TXR) = ch; -} - -static inline void flush(void) -{ -} - -#define MX1_UART1_BASE_ADDR 0x00206000 -#define MX25_UART1_BASE_ADDR 0x43f90000 -#define MX2X_UART1_BASE_ADDR 0x1000a000 -#define MX3X_UART1_BASE_ADDR 0x43F90000 -#define MX3X_UART2_BASE_ADDR 0x43F94000 -#define MX3X_UART5_BASE_ADDR 0x43FB4000 -#define MX51_UART1_BASE_ADDR 0x73fbc000 -#define MX50_UART1_BASE_ADDR 0x53fbc000 -#define MX53_UART1_BASE_ADDR 0x53fbc000 - -static __inline__ void __arch_decomp_setup(unsigned long arch_id) -{ - switch (arch_id) { - case MACH_TYPE_MX1ADS: - case MACH_TYPE_SCB9328: - uart_base = MX1_UART1_BASE_ADDR; - break; - case MACH_TYPE_MX25_3DS: - uart_base = MX25_UART1_BASE_ADDR; - break; - case MACH_TYPE_IMX27LITE: - case MACH_TYPE_MX27_3DS: - case MACH_TYPE_MX27ADS: - case MACH_TYPE_PCM038: - case MACH_TYPE_MX21ADS: - case MACH_TYPE_PCA100: - case MACH_TYPE_MXT_TD60: - case MACH_TYPE_IMX27IPCAM: - uart_base = MX2X_UART1_BASE_ADDR; - break; - case MACH_TYPE_MX31LITE: - case MACH_TYPE_ARMADILLO5X0: - case MACH_TYPE_MX31MOBOARD: - case MACH_TYPE_QONG: - case MACH_TYPE_MX31_3DS: - case MACH_TYPE_PCM037: - case MACH_TYPE_MX31ADS: - case MACH_TYPE_MX35_3DS: - case MACH_TYPE_PCM043: - case MACH_TYPE_LILLY1131: - case MACH_TYPE_VPR200: - case MACH_TYPE_EUKREA_CPUIMX35SD: - uart_base = MX3X_UART1_BASE_ADDR; - break; - case MACH_TYPE_MAGX_ZN5: - uart_base = MX3X_UART2_BASE_ADDR; - break; - case MACH_TYPE_BUG: - uart_base = MX3X_UART5_BASE_ADDR; - break; - case MACH_TYPE_MX51_BABBAGE: - case MACH_TYPE_EUKREA_CPUIMX51SD: - case MACH_TYPE_MX51_3DS: - uart_base = MX51_UART1_BASE_ADDR; - break; - case MACH_TYPE_MX50_RDP: - uart_base = MX50_UART1_BASE_ADDR; - break; - case MACH_TYPE_MX53_EVK: - case MACH_TYPE_MX53_LOCO: - case MACH_TYPE_MX53_SMD: - case MACH_TYPE_MX53_ARD: - uart_base = MX53_UART1_BASE_ADDR; - break; - default: - break; - } -} - -#define arch_decomp_setup() __arch_decomp_setup(arch_id) -#define arch_decomp_wdog() - -#endif /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */ diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 82fcb206b5b2..665870dce3c8 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -154,6 +154,12 @@ config OMAP_32K_TIMER intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5. + On OMAP2PLUS this value is only used for CONFIG_HZ and + CLOCK_TICK_RATE compile time calculation. + The actual timer selection is done in the board file + through the (DT_)MACHINE_START structure. + + config OMAP3_L2_AUX_SECURE_SAVE_RESTORE bool "OMAP3 HS/EMU save and restore for L2 AUX control register" depends on ARCH_OMAP3 && PM diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 4bd0ace20e98..8d885848600a 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := common.o sram.o dma.o fb.o counter_32k.o +obj-y := sram.o dma.o fb.o counter_32k.o obj-m := obj-n := obj- := @@ -19,4 +19,3 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) # OMAP mailbox framework obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o -obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c deleted file mode 100644 index a1555e028123..000000000000 --- a/arch/arm/plat-omap/common.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * linux/arch/arm/plat-omap/common.c - * - * Code common to all OMAP machines. - * The file is created by Tony Lindgren <tony@atomide.com> - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/dma-mapping.h> - -#include "common.h" -#include <plat-omap/dma-omap.h> - -void __init omap_init_consistent_dma_size(void) -{ -#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE - init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20); -#endif -} diff --git a/arch/arm/plat-omap/common.h b/arch/arm/plat-omap/common.h deleted file mode 100644 index 8ae0542a37d9..000000000000 --- a/arch/arm/plat-omap/common.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Header for shared OMAP code in plat-omap. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H -#define __ARCH_ARM_MACH_OMAP_COMMON_H - -extern int __init omap_init_clocksource_32k(void __iomem *vbase); - -extern void __init omap_check_revision(void); - -extern void omap_reserve(void); -struct omap_hwmod; -extern int omap_dss_reset(struct omap_hwmod *); - -#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 66bf3f9324fe..f3771cdb9838 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -22,8 +22,6 @@ #include <asm/mach/time.h> #include <asm/sched_clock.h> -#include "common.h" - /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ #define OMAP2_32KSYNCNT_REV_OFF 0x0 #define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 5a4678edd65a..a609e2161817 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -15,8 +15,7 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <mach/hardware.h> -#include "../mach-omap2/debug-devices.h" +#include <plat/debug-devices.h> /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index feca128bc8ed..aa7ebc6bcd65 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -17,16 +17,33 @@ #include <linux/platform_data/gpio-omap.h> #include <linux/slab.h> -#include <mach/hardware.h> #include <asm/mach-types.h> -#include "fpga.h" - /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the * debug board (all green), accessed through FPGA registers. */ +/* NOTE: most boards don't have a static mapping for the FPGA ... */ +struct h2p2_dbg_fpga { + /* offset 0x00 */ + u16 smc91x[8]; + /* offset 0x10 */ + u16 fpga_rev; + u16 board_rev; + u16 gpio_outputs; + u16 leds; + /* offset 0x18 */ + u16 misc_inputs; + u16 lan_status; + u16 lan_reset; + u16 reserved0; + /* offset 0x20 */ + u16 ps2_data; + u16 ps2_ctrl; + /* plus also 4 rs232 ports ... */ +}; + static struct h2p2_dbg_fpga __iomem *fpga; static u16 fpga_led_state; @@ -94,7 +111,7 @@ static int fpga_probe(struct platform_device *pdev) if (!iomem) return -ENODEV; - fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE); + fpga = ioremap(iomem->start, resource_size(iomem)); __raw_writew(0xff, &fpga->leds); for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) { diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 49803cc18787..37a488aaa2ba 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -36,10 +36,7 @@ #include <linux/slab.h> #include <linux/delay.h> -#include <plat-omap/dma-omap.h> - -#include "../mach-omap1/soc.h" -#include "../mach-omap2/soc.h" +#include <linux/omap-dma.h> /* * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA @@ -182,7 +179,7 @@ void omap_set_dma_priority(int lch, int dst_port, int priority) unsigned long reg; u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { switch (dst_port) { case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */ reg = OMAP_TC_OCPT1_PRIOR; @@ -234,7 +231,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, l |= data_type; p->dma_write(l, CSDP, lch); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 ccr; ccr = p->dma_read(CCR, lch); @@ -250,7 +247,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, p->dma_write(ccr, CCR2, lch); } - if (cpu_class_is_omap2() && dma_trigger) { + if (dma_omap2plus() && dma_trigger) { u32 val; val = p->dma_read(CCR, lch); @@ -290,7 +287,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) { BUG_ON(omap_dma_in_1510_mode()); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 w; w = p->dma_read(CCR2, lch); @@ -320,7 +317,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) p->dma_write(w, LCH_CTRL, lch); } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { u32 val; val = p->dma_read(CCR, lch); @@ -348,7 +345,7 @@ EXPORT_SYMBOL(omap_set_dma_color_mode); void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode) { - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { u32 csdp; csdp = p->dma_read(CSDP, lch); @@ -361,7 +358,7 @@ EXPORT_SYMBOL(omap_set_dma_write_mode); void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode) { - if (cpu_class_is_omap1() && !cpu_is_omap15xx()) { + if (dma_omap1() && !dma_omap15xx()) { u32 l; l = p->dma_read(LCH_CTRL, lch); @@ -379,7 +376,7 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode, { u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { u16 w; w = p->dma_read(CSDP, lch); @@ -421,7 +418,7 @@ EXPORT_SYMBOL(omap_set_dma_params); void omap_set_dma_src_index(int lch, int eidx, int fidx) { - if (cpu_class_is_omap2()) + if (dma_omap2plus()) return; p->dma_write(eidx, CSEI, lch); @@ -453,13 +450,13 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x2; break; } @@ -469,7 +466,7 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) * fall through */ case OMAP_DMA_DATA_BURST_16: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x3; break; } @@ -493,7 +490,7 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, { u32 l; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { l = p->dma_read(CSDP, lch); l &= ~(0x1f << 9); l |= dest_port << 9; @@ -514,7 +511,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_params); void omap_set_dma_dest_index(int lch, int eidx, int fidx) { - if (cpu_class_is_omap2()) + if (dma_omap2plus()) return; p->dma_write(eidx, CDEI, lch); @@ -546,19 +543,19 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_class_is_omap2()) + if (dma_omap2plus()) burst = 0x2; else burst = 0x3; break; case OMAP_DMA_DATA_BURST_16: - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { burst = 0x3; break; } @@ -579,7 +576,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); static inline void omap_enable_channel_irq(int lch) { /* Clear CSR */ - if (cpu_class_is_omap1()) + if (dma_omap1()) p->dma_read(CSR, lch); else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); @@ -593,7 +590,7 @@ static inline void omap_disable_channel_irq(int lch) /* disable channel interrupts */ p->dma_write(0, CICR, lch); /* Clear CSR */ - if (cpu_class_is_omap1()) + if (dma_omap1()) p->dma_read(CSR, lch); else p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch); @@ -617,7 +614,7 @@ static inline void enable_lnk(int lch) l = p->dma_read(CLNK_CTRL, lch); - if (cpu_class_is_omap1()) + if (dma_omap1()) l &= ~(1 << 14); /* Set the ENABLE_LNK bits */ @@ -625,7 +622,7 @@ static inline void enable_lnk(int lch) l = dma_chan[lch].next_lch | (1 << 15); #ifndef CONFIG_ARCH_OMAP1 - if (cpu_class_is_omap2()) + if (dma_omap2plus()) if (dma_chan[lch].next_linked_ch != -1) l = dma_chan[lch].next_linked_ch | (1 << 15); #endif @@ -642,12 +639,12 @@ static inline void disable_lnk(int lch) /* Disable interrupts */ omap_disable_channel_irq(lch); - if (cpu_class_is_omap1()) { + if (dma_omap1()) { /* Set the STOP_LNK bit */ l |= 1 << 14; } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { /* Clear the ENABLE_LNK bit */ l &= ~(1 << 15); } @@ -661,7 +658,7 @@ static inline void omap2_enable_irq_lch(int lch) u32 val; unsigned long flags; - if (!cpu_class_is_omap2()) + if (dma_omap1()) return; spin_lock_irqsave(&dma_chan_lock, flags); @@ -679,7 +676,7 @@ static inline void omap2_disable_irq_lch(int lch) u32 val; unsigned long flags; - if (!cpu_class_is_omap2()) + if (dma_omap1()) return; spin_lock_irqsave(&dma_chan_lock, flags); @@ -718,7 +715,7 @@ int omap_request_dma(int dev_id, const char *dev_name, if (p->clear_lch_regs) p->clear_lch_regs(free_ch); - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap_clear_dma(free_ch); spin_unlock_irqrestore(&dma_chan_lock, flags); @@ -729,7 +726,7 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->flags = 0; #ifndef CONFIG_ARCH_OMAP1 - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { chan->chain_id = -1; chan->next_linked_ch = -1; } @@ -737,13 +734,13 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; - if (cpu_class_is_omap1()) + if (dma_omap1()) chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ; - else if (cpu_class_is_omap2()) + else if (dma_omap2plus()) chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ | OMAP2_DMA_TRANS_ERR_IRQ; - if (cpu_is_omap16xx()) { + if (dma_omap16xx()) { /* If the sync device is set, configure it dynamically. */ if (dev_id != 0) { set_gdma_dev(free_ch + 1, dev_id); @@ -754,11 +751,11 @@ int omap_request_dma(int dev_id, const char *dev_name, * id. */ p->dma_write(dev_id | (1 << 10), CCR, free_ch); - } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) { + } else if (dma_omap1()) { p->dma_write(dev_id, CCR, free_ch); } - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { omap_enable_channel_irq(free_ch); omap2_enable_irq_lch(free_ch); } @@ -780,7 +777,7 @@ void omap_free_dma(int lch) } /* Disable interrupt for logical channel */ - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap2_disable_irq_lch(lch); /* Disable all DMA interrupts for the channel. */ @@ -790,7 +787,7 @@ void omap_free_dma(int lch) p->dma_write(0, CCR, lch); /* Clear registers */ - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap_clear_dma(lch); spin_lock_irqsave(&dma_chan_lock, flags); @@ -816,7 +813,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams) { u32 reg; - if (!cpu_class_is_omap2()) { + if (dma_omap1()) { printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__); return; } @@ -855,7 +852,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio, } l = p->dma_read(CCR, lch); l &= ~((1 << 6) | (1 << 26)); - if (cpu_class_is_omap2() && !cpu_is_omap242x()) + if (d->dev_caps & IS_RW_PRIORITY) l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26); else l |= ((read_prio & 0x1) << 6); @@ -888,7 +885,7 @@ void omap_start_dma(int lch) * The CPC/CDAC register needs to be initialized to zero * before starting dma transfer. */ - if (cpu_is_omap15xx()) + if (dma_omap15xx()) p->dma_write(0, CPC, lch); else p->dma_write(0, CDAC, lch); @@ -1051,7 +1048,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) { dma_addr_t offset = 0; - if (cpu_is_omap15xx()) + if (dma_omap15xx()) offset = p->dma_read(CPC, lch); else offset = p->dma_read(CSAC, lch); @@ -1059,7 +1056,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0) offset = p->dma_read(CSAC, lch); - if (!cpu_is_omap15xx()) { + if (!dma_omap15xx()) { /* * CDAC == 0 indicates that the DMA transfer on the channel has * not been started (no data has been transferred so far). @@ -1071,7 +1068,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) offset = p->dma_read(CSSA, lch); } - if (cpu_class_is_omap1()) + if (dma_omap1()) offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000); return offset; @@ -1090,7 +1087,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) { dma_addr_t offset = 0; - if (cpu_is_omap15xx()) + if (dma_omap15xx()) offset = p->dma_read(CPC, lch); else offset = p->dma_read(CDAC, lch); @@ -1099,7 +1096,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is * read before the DMA controller finished disabling the channel. */ - if (!cpu_is_omap15xx() && offset == 0) { + if (!dma_omap15xx() && offset == 0) { offset = p->dma_read(CDAC, lch); /* * CDAC == 0 indicates that the DMA transfer on the channel has @@ -1110,7 +1107,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch) offset = p->dma_read(CDSA, lch); } - if (cpu_class_is_omap1()) + if (dma_omap1()) offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000); return offset; @@ -1127,7 +1124,7 @@ int omap_dma_running(void) { int lch; - if (cpu_class_is_omap1()) + if (dma_omap1()) if (omap_lcd_dma_running()) return 1; @@ -2030,7 +2027,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) dma_chan = d->chan; enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { dma_linked_lch = kzalloc(sizeof(struct dma_link_info) * dma_lch_count, GFP_KERNEL); if (!dma_linked_lch) { @@ -2042,7 +2039,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) spin_lock_init(&dma_chan_lock); for (ch = 0; ch < dma_chan_count; ch++) { omap_clear_dma(ch); - if (cpu_class_is_omap2()) + if (dma_omap2plus()) omap2_disable_irq_lch(ch); dma_chan[ch].dev_id = -1; @@ -2051,7 +2048,7 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) if (ch >= 6 && enable_1510_mode) continue; - if (cpu_class_is_omap1()) { + if (dma_omap1()) { /* * request_irq() doesn't like dev_id (ie. ch) being * zero, so we have to kludge around this. @@ -2076,11 +2073,11 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) } } - if (cpu_class_is_omap2() && !cpu_is_omap242x()) + if (d->dev_caps & IS_RW_PRIORITY) omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, DMA_DEFAULT_FIFO_DEPTH, 0); - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); if (dma_irq < 0) { @@ -2095,9 +2092,8 @@ static int __devinit omap_system_dma_probe(struct platform_device *pdev) } } - /* reserve dma channels 0 and 1 in high security devices */ - if (cpu_is_omap34xx() && - (omap_type() != OMAP2_DEVICE_TYPE_GP)) { + /* reserve dma channels 0 and 1 in high security devices on 34xx */ + if (d->dev_caps & HS_CHANNELS_RESERVED) { pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n"); dma_chan[0].dev_id = 0; dma_chan[1].dev_id = 1; @@ -2124,7 +2120,7 @@ static int __devexit omap_system_dma_remove(struct platform_device *pdev) { int dma_irq; - if (cpu_class_is_omap2()) { + if (dma_omap2plus()) { char irq_name[4]; strcpy(irq_name, "0"); dma_irq = platform_get_irq_byname(pdev, irq_name); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 4a0b30a4ebda..89585c293554 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -35,18 +35,19 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/clk.h> #include <linux/module.h> #include <linux/io.h> #include <linux/device.h> #include <linux/err.h> #include <linux/pm_runtime.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/platform_data/dmtimer-omap.h> #include <plat/dmtimer.h> -#include <mach/hardware.h> - -#include "../mach-omap2/omap-pm.h" - static u32 omap_reserved_systimers; static LIST_HEAD(omap_timer_list); static DEFINE_SPINLOCK(dm_timer_lock); @@ -85,10 +86,6 @@ static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg, static void omap_timer_restore_context(struct omap_dm_timer *timer) { - if (timer->revision == 1) - __raw_writel(timer->context.tistat, timer->sys_stat); - - __raw_writel(timer->context.tisr, timer->irq_stat); omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, timer->context.twer); omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, @@ -104,39 +101,38 @@ static void omap_timer_restore_context(struct omap_dm_timer *timer) timer->context.tclr); } -static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer) +static int omap_dm_timer_reset(struct omap_dm_timer *timer) { - int c; + u32 l, timeout = 100000; - if (!timer->sys_stat) - return; + if (timer->revision != 1) + return -EINVAL; - c = 0; - while (!(__raw_readl(timer->sys_stat) & 1)) { - c++; - if (c > 100000) { - printk(KERN_ERR "Timer failed to reset\n"); - return; - } - } -} + omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); -static void omap_dm_timer_reset(struct omap_dm_timer *timer) -{ - omap_dm_timer_enable(timer); - if (timer->pdev->id != 1) { - omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); - omap_dm_timer_wait_for_reset(timer); + do { + l = __omap_dm_timer_read(timer, + OMAP_TIMER_V1_SYS_STAT_OFFSET, 0); + } while (!l && timeout--); + + if (!timeout) { + dev_err(&timer->pdev->dev, "Timer failed to reset\n"); + return -ETIMEDOUT; } - __omap_dm_timer_reset(timer, 0, 0); - omap_dm_timer_disable(timer); - timer->posted = 1; + /* Configure timer for smart-idle mode */ + l = __omap_dm_timer_read(timer, OMAP_TIMER_OCP_CFG_OFFSET, 0); + l |= 0x2 << 0x3; + __omap_dm_timer_write(timer, OMAP_TIMER_OCP_CFG_OFFSET, l, 0); + + timer->posted = 0; + + return 0; } -int omap_dm_timer_prepare(struct omap_dm_timer *timer) +static int omap_dm_timer_prepare(struct omap_dm_timer *timer) { - int ret; + int rc; /* * FIXME: OMAP1 devices do not use the clock framework for dmtimers so @@ -151,13 +147,20 @@ int omap_dm_timer_prepare(struct omap_dm_timer *timer) } } - if (timer->capability & OMAP_TIMER_NEEDS_RESET) - omap_dm_timer_reset(timer); + omap_dm_timer_enable(timer); - ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); + if (timer->capability & OMAP_TIMER_NEEDS_RESET) { + rc = omap_dm_timer_reset(timer); + if (rc) { + omap_dm_timer_disable(timer); + return rc; + } + } - timer->posted = 1; - return ret; + __omap_dm_timer_enable_posted(timer); + omap_dm_timer_disable(timer); + + return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); } static inline u32 omap_dm_timer_reserved_systimer(int id) @@ -213,6 +216,13 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) unsigned long flags; int ret = 0; + /* Requesting timer by ID is not supported when device tree is used */ + if (of_have_populated_dt()) { + pr_warn("%s: Please use omap_dm_timer_request_by_cap()\n", + __func__); + return NULL; + } + spin_lock_irqsave(&dm_timer_lock, flags); list_for_each_entry(t, &omap_timer_list, node) { if (t->pdev->id == id && !t->reserved) { @@ -238,6 +248,58 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) } EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific); +/** + * omap_dm_timer_request_by_cap - Request a timer by capability + * @cap: Bit mask of capabilities to match + * + * Find a timer based upon capabilities bit mask. Callers of this function + * should use the definitions found in the plat/dmtimer.h file under the + * comment "timer capabilities used in hwmod database". Returns pointer to + * timer handle on success and a NULL pointer on failure. + */ +struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap) +{ + struct omap_dm_timer *timer = NULL, *t; + unsigned long flags; + + if (!cap) + return NULL; + + spin_lock_irqsave(&dm_timer_lock, flags); + list_for_each_entry(t, &omap_timer_list, node) { + if ((!t->reserved) && ((t->capability & cap) == cap)) { + /* + * If timer is not NULL, we have already found one timer + * but it was not an exact match because it had more + * capabilites that what was required. Therefore, + * unreserve the last timer found and see if this one + * is a better match. + */ + if (timer) + timer->reserved = 0; + + timer = t; + timer->reserved = 1; + + /* Exit loop early if we find an exact match */ + if (t->capability == cap) + break; + } + } + spin_unlock_irqrestore(&dm_timer_lock, flags); + + if (timer && omap_dm_timer_prepare(timer)) { + timer->reserved = 0; + timer = NULL; + } + + if (!timer) + pr_debug("%s: timer request failed!\n", __func__); + + return timer; +} +EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap); + int omap_dm_timer_free(struct omap_dm_timer *timer) { if (unlikely(!timer)) @@ -272,7 +334,7 @@ int omap_dm_timer_get_irq(struct omap_dm_timer *timer) EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq); #if defined(CONFIG_ARCH_OMAP1) - +#include <mach/hardware.h> /** * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR * @inputmask: current value of idlect mask @@ -349,7 +411,8 @@ int omap_dm_timer_start(struct omap_dm_timer *timer) omap_dm_timer_enable(timer); if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + if (timer->get_context_loss_count && + timer->get_context_loss_count(&timer->pdev->dev) != timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -378,9 +441,11 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) __omap_dm_timer_stop(timer, timer->posted, rate); - if (!(timer->capability & OMAP_TIMER_ALWON)) - timer->ctx_loss_count = - omap_pm_get_dev_context_loss_count(&timer->pdev->dev); + if (!(timer->capability & OMAP_TIMER_ALWON)) { + if (timer->get_context_loss_count) + timer->ctx_loss_count = + timer->get_context_loss_count(&timer->pdev->dev); + } /* * Since the register values are computed and written within @@ -389,7 +454,6 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer) */ timer->context.tclr = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); - timer->context.tisr = __raw_readl(timer->irq_stat); omap_dm_timer_disable(timer); return 0; } @@ -399,7 +463,7 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { int ret; char *parent_name = NULL; - struct clk *fclk, *parent; + struct clk *parent; struct dmtimer_platform_data *pdata; if (unlikely(!timer)) @@ -415,14 +479,11 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) * use the clock framework to set the parent clock. To be removed * once OMAP1 migrated to using clock framework for dmtimers */ - if (pdata->set_timer_src) + if (pdata && pdata->set_timer_src) return pdata->set_timer_src(timer->pdev, source); - fclk = clk_get(&timer->pdev->dev, "fck"); - if (IS_ERR_OR_NULL(fclk)) { - pr_err("%s: fck not found\n", __func__); + if (!timer->fclk) return -EINVAL; - } switch (source) { case OMAP_TIMER_SRC_SYS_CLK: @@ -441,18 +502,15 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) parent = clk_get(&timer->pdev->dev, parent_name); if (IS_ERR_OR_NULL(parent)) { pr_err("%s: %s not found\n", __func__, parent_name); - ret = -EINVAL; - goto out; + return -EINVAL; } - ret = clk_set_parent(fclk, parent); + ret = clk_set_parent(timer->fclk, parent); if (IS_ERR_VALUE(ret)) pr_err("%s: failed to set %s as parent\n", __func__, parent_name); clk_put(parent); -out: - clk_put(fclk); return ret; } @@ -496,7 +554,8 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, omap_dm_timer_enable(timer); if (!(timer->capability & OMAP_TIMER_ALWON)) { - if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) != + if (timer->get_context_loss_count && + timer->get_context_loss_count(&timer->pdev->dev) != timer->ctx_loss_count) omap_timer_restore_context(timer); } @@ -534,8 +593,8 @@ int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, l |= OMAP_TIMER_CTRL_CE; else l &= ~OMAP_TIMER_CTRL_CE; - omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match); + omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); /* Save the context */ timer->context.tclr = l; @@ -611,6 +670,37 @@ int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, } EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable); +/** + * omap_dm_timer_set_int_disable - disable timer interrupts + * @timer: pointer to timer handle + * @mask: bit mask of interrupts to be disabled + * + * Disables the specified timer interrupts for a timer. + */ +int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask) +{ + u32 l = mask; + + if (unlikely(!timer)) + return -EINVAL; + + omap_dm_timer_enable(timer); + + if (timer->revision == 1) + l = __raw_readl(timer->irq_ena) & ~mask; + + __raw_writel(l, timer->irq_dis); + l = omap_dm_timer_read_reg(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask; + omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, l); + + /* Save the context */ + timer->context.tier &= ~mask; + timer->context.twer &= ~mask; + omap_dm_timer_disable(timer); + return 0; +} +EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_disable); + unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) { unsigned int l; @@ -632,8 +722,7 @@ int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) return -EINVAL; __omap_dm_timer_write_status(timer, value); - /* Save the context */ - timer->context.tisr = value; + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_write_status); @@ -696,7 +785,7 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct dmtimer_platform_data *pdata = pdev->dev.platform_data; - if (!pdata) { + if (!pdata && !dev->of_node) { dev_err(dev, "%s: no platform data.\n", __func__); return -ENODEV; } @@ -725,11 +814,25 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev) return -ENOMEM; } - timer->id = pdev->id; + if (dev->of_node) { + if (of_find_property(dev->of_node, "ti,timer-alwon", NULL)) + timer->capability |= OMAP_TIMER_ALWON; + if (of_find_property(dev->of_node, "ti,timer-dsp", NULL)) + timer->capability |= OMAP_TIMER_HAS_DSP_IRQ; + if (of_find_property(dev->of_node, "ti,timer-pwm", NULL)) + timer->capability |= OMAP_TIMER_HAS_PWM; + if (of_find_property(dev->of_node, "ti,timer-secure", NULL)) + timer->capability |= OMAP_TIMER_SECURE; + } else { + timer->id = pdev->id; + timer->errata = pdata->timer_errata; + timer->capability = pdata->timer_capability; + timer->reserved = omap_dm_timer_reserved_systimer(timer->id); + timer->get_context_loss_count = pdata->get_context_loss_count; + } + timer->irq = irq->start; - timer->reserved = omap_dm_timer_reserved_systimer(timer->id); timer->pdev = pdev; - timer->capability = pdata->timer_capability; /* Skip pm_runtime_enable for OMAP1 */ if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) { @@ -769,7 +872,8 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev) spin_lock_irqsave(&dm_timer_lock, flags); list_for_each_entry(timer, &omap_timer_list, node) - if (timer->pdev->id == pdev->id) { + if (!strcmp(dev_name(&timer->pdev->dev), + dev_name(&pdev->dev))) { list_del(&timer->node); ret = 0; break; @@ -779,11 +883,18 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev) return ret; } +static const struct of_device_id omap_timer_match[] = { + { .compatible = "ti,omap2-timer", }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_timer_match); + static struct platform_driver omap_dm_timer_driver = { .probe = omap_dm_timer_probe, .remove = __devexit_p(omap_dm_timer_remove), .driver = { .name = "omap_timer", + .of_match_table = of_match_ptr(omap_timer_match), }, }; diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index f868caeedfd6..3a77b30f53d4 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -30,7 +30,6 @@ #include <linux/io.h> #include <linux/omapfb.h> -#include <mach/hardware.h> #include <asm/mach/map.h> #include <plat/cpu.h> diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index be6deb7c12ec..f9df624d108c 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -31,34 +31,13 @@ #include <linux/err.h> #include <linux/clk.h> -#include <mach/irqs.h> - -#include "../mach-omap1/soc.h" -#include "../mach-omap2/soc.h" - -#include "i2c.h" +#include <plat/i2c.h> #define OMAP_I2C_MAX_CONTROLLERS 4 static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS]; #define OMAP_I2C_CMDLINE_SETUP (BIT(31)) -static int __init omap_i2c_nr_ports(void) -{ - int ports = 0; - - if (cpu_class_is_omap1()) - ports = 1; - else if (cpu_is_omap24xx()) - ports = 2; - else if (cpu_is_omap34xx()) - ports = 3; - else if (cpu_is_omap44xx()) - ports = 4; - - return ports; -} - /** * omap_i2c_bus_setup - Process command line options for the I2C bus speed * @str: String of options @@ -72,12 +51,11 @@ static int __init omap_i2c_nr_ports(void) */ static int __init omap_i2c_bus_setup(char *str) { - int ports; int ints[3]; - ports = omap_i2c_nr_ports(); get_options(str, 3, ints); - if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports) + if (ints[0] < 2 || ints[1] < 1 || + ints[1] > OMAP_I2C_MAX_CONTROLLERS) return 0; i2c_pdata[ints[1] - 1].clkrate = ints[2]; i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP; @@ -122,7 +100,7 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate, { int err; - BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports()); + BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS); if (info) { err = i2c_register_board_info(bus_id, info, len); diff --git a/arch/arm/plat-omap/include/plat-omap/dma-omap.h b/arch/arm/plat-omap/include/plat-omap/dma-omap.h deleted file mode 100644 index 222be7e934e5..000000000000 --- a/arch/arm/plat-omap/include/plat-omap/dma-omap.h +++ /dev/null @@ -1,367 +0,0 @@ -/* - * OMAP DMA handling defines and function - * - * Copyright (C) 2003 Nokia Corporation - * Author: Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include <linux/platform_device.h> - -#define INT_DMA_LCD 25 - -#define OMAP1_DMA_TOUT_IRQ (1 << 0) -#define OMAP_DMA_DROP_IRQ (1 << 1) -#define OMAP_DMA_HALF_IRQ (1 << 2) -#define OMAP_DMA_FRAME_IRQ (1 << 3) -#define OMAP_DMA_LAST_IRQ (1 << 4) -#define OMAP_DMA_BLOCK_IRQ (1 << 5) -#define OMAP1_DMA_SYNC_IRQ (1 << 6) -#define OMAP2_DMA_PKT_IRQ (1 << 7) -#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8) -#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9) -#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) -#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) - -#define OMAP_DMA_CCR_EN (1 << 7) -#define OMAP_DMA_CCR_RD_ACTIVE (1 << 9) -#define OMAP_DMA_CCR_WR_ACTIVE (1 << 10) -#define OMAP_DMA_CCR_SEL_SRC_DST_SYNC (1 << 24) -#define OMAP_DMA_CCR_BUFFERING_DISABLE (1 << 25) - -#define OMAP_DMA_DATA_TYPE_S8 0x00 -#define OMAP_DMA_DATA_TYPE_S16 0x01 -#define OMAP_DMA_DATA_TYPE_S32 0x02 - -#define OMAP_DMA_SYNC_ELEMENT 0x00 -#define OMAP_DMA_SYNC_FRAME 0x01 -#define OMAP_DMA_SYNC_BLOCK 0x02 -#define OMAP_DMA_SYNC_PACKET 0x03 - -#define OMAP_DMA_DST_SYNC_PREFETCH 0x02 -#define OMAP_DMA_SRC_SYNC 0x01 -#define OMAP_DMA_DST_SYNC 0x00 - -#define OMAP_DMA_PORT_EMIFF 0x00 -#define OMAP_DMA_PORT_EMIFS 0x01 -#define OMAP_DMA_PORT_OCP_T1 0x02 -#define OMAP_DMA_PORT_TIPB 0x03 -#define OMAP_DMA_PORT_OCP_T2 0x04 -#define OMAP_DMA_PORT_MPUI 0x05 - -#define OMAP_DMA_AMODE_CONSTANT 0x00 -#define OMAP_DMA_AMODE_POST_INC 0x01 -#define OMAP_DMA_AMODE_SINGLE_IDX 0x02 -#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03 - -#define DMA_DEFAULT_FIFO_DEPTH 0x10 -#define DMA_DEFAULT_ARB_RATE 0x01 -/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */ -#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */ -#define DMA_THREAD_RESERVE_ONET (0x01 << 12) -#define DMA_THREAD_RESERVE_TWOT (0x02 << 12) -#define DMA_THREAD_RESERVE_THREET (0x03 << 12) -#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */ -#define DMA_THREAD_FIFO_75 (0x01 << 14) -#define DMA_THREAD_FIFO_25 (0x02 << 14) -#define DMA_THREAD_FIFO_50 (0x03 << 14) - -/* DMA4_OCP_SYSCONFIG bits */ -#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12) -#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8) -#define DMA_SYSCONFIG_EMUFREE (1 << 5) -#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3) -#define DMA_SYSCONFIG_SOFTRESET (1 << 2) -#define DMA_SYSCONFIG_AUTOIDLE (1 << 0) - -#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12) -#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3) - -#define DMA_IDLEMODE_SMARTIDLE 0x2 -#define DMA_IDLEMODE_NO_IDLE 0x1 -#define DMA_IDLEMODE_FORCE_IDLE 0x0 - -/* Chaining modes*/ -#ifndef CONFIG_ARCH_OMAP1 -#define OMAP_DMA_STATIC_CHAIN 0x1 -#define OMAP_DMA_DYNAMIC_CHAIN 0x2 -#define OMAP_DMA_CHAIN_ACTIVE 0x1 -#define OMAP_DMA_CHAIN_INACTIVE 0x0 -#endif - -#define DMA_CH_PRIO_HIGH 0x1 -#define DMA_CH_PRIO_LOW 0x0 /* Def */ - -/* Errata handling */ -#define IS_DMA_ERRATA(id) (errata & (id)) -#define SET_DMA_ERRATA(id) (errata |= (id)) - -#define DMA_ERRATA_IFRAME_BUFFERING BIT(0x0) -#define DMA_ERRATA_PARALLEL_CHANNELS BIT(0x1) -#define DMA_ERRATA_i378 BIT(0x2) -#define DMA_ERRATA_i541 BIT(0x3) -#define DMA_ERRATA_i88 BIT(0x4) -#define DMA_ERRATA_3_3 BIT(0x5) -#define DMA_ROMCODE_BUG BIT(0x6) - -/* Attributes for OMAP DMA Contrller */ -#define DMA_LINKED_LCH BIT(0x0) -#define GLOBAL_PRIORITY BIT(0x1) -#define RESERVE_CHANNEL BIT(0x2) -#define IS_CSSA_32 BIT(0x3) -#define IS_CDSA_32 BIT(0x4) -#define IS_RW_PRIORITY BIT(0x5) -#define ENABLE_1510_MODE BIT(0x6) -#define SRC_PORT BIT(0x7) -#define DST_PORT BIT(0x8) -#define SRC_INDEX BIT(0x9) -#define DST_INDEX BIT(0xA) -#define IS_BURST_ONLY4 BIT(0xB) -#define CLEAR_CSR_ON_READ BIT(0xC) -#define IS_WORD_16 BIT(0xD) - -/* Defines for DMA Capabilities */ -#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18) -#define DMA_HAS_CONSTANT_FILL_CAPS (0x1 << 19) -#define DMA_HAS_DESCRIPTOR_CAPS (0x3 << 20) - -enum omap_reg_offsets { - -GCR, GSCR, GRST1, HW_ID, -PCH2_ID, PCH0_ID, PCH1_ID, PCHG_ID, -PCHD_ID, CAPS_0, CAPS_1, CAPS_2, -CAPS_3, CAPS_4, PCH2_SR, PCH0_SR, -PCH1_SR, PCHD_SR, REVISION, IRQSTATUS_L0, -IRQSTATUS_L1, IRQSTATUS_L2, IRQSTATUS_L3, IRQENABLE_L0, -IRQENABLE_L1, IRQENABLE_L2, IRQENABLE_L3, SYSSTATUS, -OCP_SYSCONFIG, - -/* omap1+ specific */ -CPC, CCR2, LCH_CTRL, - -/* Common registers for all omap's */ -CSDP, CCR, CICR, CSR, -CEN, CFN, CSFI, CSEI, -CSAC, CDAC, CDEI, -CDFI, CLNK_CTRL, - -/* Channel specific registers */ -CSSA, CDSA, COLOR, -CCEN, CCFN, - -/* omap3630 and omap4 specific */ -CDP, CNDP, CCDN, - -}; - -enum omap_dma_burst_mode { - OMAP_DMA_DATA_BURST_DIS = 0, - OMAP_DMA_DATA_BURST_4, - OMAP_DMA_DATA_BURST_8, - OMAP_DMA_DATA_BURST_16, -}; - -enum end_type { - OMAP_DMA_LITTLE_ENDIAN = 0, - OMAP_DMA_BIG_ENDIAN -}; - -enum omap_dma_color_mode { - OMAP_DMA_COLOR_DIS = 0, - OMAP_DMA_CONSTANT_FILL, - OMAP_DMA_TRANSPARENT_COPY -}; - -enum omap_dma_write_mode { - OMAP_DMA_WRITE_NON_POSTED = 0, - OMAP_DMA_WRITE_POSTED, - OMAP_DMA_WRITE_LAST_NON_POSTED -}; - -enum omap_dma_channel_mode { - OMAP_DMA_LCH_2D = 0, - OMAP_DMA_LCH_G, - OMAP_DMA_LCH_P, - OMAP_DMA_LCH_PD -}; - -struct omap_dma_channel_params { - int data_type; /* data type 8,16,32 */ - int elem_count; /* number of elements in a frame */ - int frame_count; /* number of frames in a element */ - - int src_port; /* Only on OMAP1 REVISIT: Is this needed? */ - int src_amode; /* constant, post increment, indexed, - double indexed */ - unsigned long src_start; /* source address : physical */ - int src_ei; /* source element index */ - int src_fi; /* source frame index */ - - int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */ - int dst_amode; /* constant, post increment, indexed, - double indexed */ - unsigned long dst_start; /* source address : physical */ - int dst_ei; /* source element index */ - int dst_fi; /* source frame index */ - - int trigger; /* trigger attached if the channel is - synchronized */ - int sync_mode; /* sycn on element, frame , block or packet */ - int src_or_dst_synch; /* source synch(1) or destination synch(0) */ - - int ie; /* interrupt enabled */ - - unsigned char read_prio;/* read priority */ - unsigned char write_prio;/* write priority */ - -#ifndef CONFIG_ARCH_OMAP1 - enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */ -#endif -}; - -struct omap_dma_lch { - int next_lch; - int dev_id; - u16 saved_csr; - u16 enabled_irqs; - const char *dev_name; - void (*callback)(int lch, u16 ch_status, void *data); - void *data; - long flags; - /* required for Dynamic chaining */ - int prev_linked_ch; - int next_linked_ch; - int state; - int chain_id; - int status; -}; - -struct omap_dma_dev_attr { - u32 dev_caps; - u16 lch_count; - u16 chan_count; - struct omap_dma_lch *chan; -}; - -/* System DMA platform data structure */ -struct omap_system_dma_plat_info { - struct omap_dma_dev_attr *dma_attr; - u32 errata; - void (*disable_irq_lch)(int lch); - void (*show_dma_caps)(void); - void (*clear_lch_regs)(int lch); - void (*clear_dma)(int lch); - void (*dma_write)(u32 val, int reg, int lch); - u32 (*dma_read)(int reg, int lch); -}; - -extern void __init omap_init_consistent_dma_size(void); -extern void omap_set_dma_priority(int lch, int dst_port, int priority); -extern int omap_request_dma(int dev_id, const char *dev_name, - void (*callback)(int lch, u16 ch_status, void *data), - void *data, int *dma_ch); -extern void omap_enable_dma_irq(int ch, u16 irq_bits); -extern void omap_disable_dma_irq(int ch, u16 irq_bits); -extern void omap_free_dma(int ch); -extern void omap_start_dma(int lch); -extern void omap_stop_dma(int lch); -extern void omap_set_dma_transfer_params(int lch, int data_type, - int elem_count, int frame_count, - int sync_mode, - int dma_trigger, int src_or_dst_synch); -extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, - u32 color); -extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode); -extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode); - -extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, - unsigned long src_start, - int src_ei, int src_fi); -extern void omap_set_dma_src_index(int lch, int eidx, int fidx); -extern void omap_set_dma_src_data_pack(int lch, int enable); -extern void omap_set_dma_src_burst_mode(int lch, - enum omap_dma_burst_mode burst_mode); - -extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, - unsigned long dest_start, - int dst_ei, int dst_fi); -extern void omap_set_dma_dest_index(int lch, int eidx, int fidx); -extern void omap_set_dma_dest_data_pack(int lch, int enable); -extern void omap_set_dma_dest_burst_mode(int lch, - enum omap_dma_burst_mode burst_mode); - -extern void omap_set_dma_params(int lch, - struct omap_dma_channel_params *params); - -extern void omap_dma_link_lch(int lch_head, int lch_queue); -extern void omap_dma_unlink_lch(int lch_head, int lch_queue); - -extern int omap_set_dma_callback(int lch, - void (*callback)(int lch, u16 ch_status, void *data), - void *data); -extern dma_addr_t omap_get_dma_src_pos(int lch); -extern dma_addr_t omap_get_dma_dst_pos(int lch); -extern void omap_clear_dma(int lch); -extern int omap_get_dma_active_status(int lch); -extern int omap_dma_running(void); -extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth, - int tparams); -extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio, - unsigned char write_prio); -extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype); -extern void omap_set_dma_src_endian_type(int lch, enum end_type etype); -extern int omap_get_dma_index(int lch, int *ei, int *fi); - -void omap_dma_global_context_save(void); -void omap_dma_global_context_restore(void); - -extern void omap_dma_disable_irq(int lch); - -/* Chaining APIs */ -#ifndef CONFIG_ARCH_OMAP1 -extern int omap_request_dma_chain(int dev_id, const char *dev_name, - void (*callback) (int lch, u16 ch_status, - void *data), - int *chain_id, int no_of_chans, - int chain_mode, - struct omap_dma_channel_params params); -extern int omap_free_dma_chain(int chain_id); -extern int omap_dma_chain_a_transfer(int chain_id, int src_start, - int dest_start, int elem_count, - int frame_count, void *callbk_data); -extern int omap_start_dma_chain_transfers(int chain_id); -extern int omap_stop_dma_chain_transfers(int chain_id); -extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi); -extern int omap_get_dma_chain_dst_pos(int chain_id); -extern int omap_get_dma_chain_src_pos(int chain_id); - -extern int omap_modify_dma_chain_params(int chain_id, - struct omap_dma_channel_params params); -extern int omap_dma_chain_status(int chain_id); -#endif - -#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP) -#include <mach/lcd_dma.h> -#else -static inline int omap_lcd_dma_running(void) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/plat-omap/include/plat/counter-32k.h b/arch/arm/plat-omap/include/plat/counter-32k.h new file mode 100644 index 000000000000..da000d482ff2 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/counter-32k.h @@ -0,0 +1 @@ +int omap_init_clocksource_32k(void __iomem *vbase); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index ba542ec8d513..b4516aba67ed 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -29,7 +29,7 @@ #define __ASM_ARCH_OMAP_CPU_H #ifdef CONFIG_ARCH_OMAP1 -#include "../../mach-omap1/soc.h" +#include <mach/soc.h> #endif #ifdef CONFIG_ARCH_OMAP2PLUS diff --git a/arch/arm/mach-omap2/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h index a4edbd2f7484..8fc4287222dd 100644 --- a/arch/arm/mach-omap2/debug-devices.h +++ b/arch/arm/plat-omap/include/plat/debug-devices.h @@ -1,9 +1,2 @@ -#ifndef _OMAP_DEBUG_DEVICES_H -#define _OMAP_DEBUG_DEVICES_H - -#include <linux/types.h> - /* for TI reference platforms sharing the same debug card */ extern int debug_card_init(u32 addr, unsigned gpio); - -#endif diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 85868e98c11c..a3fbc48c332e 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -32,7 +32,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> #include <linux/platform_device.h> @@ -55,6 +54,10 @@ #define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 #define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 +/* posted mode types */ +#define OMAP_TIMER_NONPOSTED 0x00 +#define OMAP_TIMER_POSTED 0x01 + /* timer capabilities used in hwmod database */ #define OMAP_TIMER_SECURE 0x80000000 #define OMAP_TIMER_ALWON 0x40000000 @@ -62,16 +65,22 @@ #define OMAP_TIMER_NEEDS_RESET 0x10000000 #define OMAP_TIMER_HAS_DSP_IRQ 0x08000000 +/* + * timer errata flags + * + * Errata i103/i767 impacts all OMAP3/4/5 devices including AM33xx. This + * errata prevents us from using posted mode on these devices, unless the + * timer counter register is never read. For more details please refer to + * the OMAP3/4/5 errata documents. + */ +#define OMAP_TIMER_ERRATA_I103_I767 0x80000000 + struct omap_timer_capability_dev_attr { u32 timer_capability; }; -struct omap_dm_timer; - struct timer_regs { u32 tidr; - u32 tistat; - u32 tisr; u32 tier; u32 twer; u32 tclr; @@ -90,15 +99,35 @@ struct timer_regs { u32 towr; }; -struct dmtimer_platform_data { - /* set_timer_src - Only used for OMAP1 devices */ - int (*set_timer_src)(struct platform_device *pdev, int source); - u32 timer_capability; +struct omap_dm_timer { + int id; + int irq; + struct clk *fclk; + + void __iomem *io_base; + void __iomem *irq_stat; /* TISR/IRQSTATUS interrupt status */ + void __iomem *irq_ena; /* irq enable */ + void __iomem *irq_dis; /* irq disable, only on v2 ip */ + void __iomem *pend; /* write pending */ + void __iomem *func_base; /* function register base */ + + unsigned long rate; + unsigned reserved:1; + unsigned posted:1; + struct timer_regs context; + int (*get_context_loss_count)(struct device *); + int ctx_loss_count; + int revision; + u32 capability; + u32 errata; + struct platform_device *pdev; + struct list_head node; }; int omap_dm_timer_reserve_systimer(int id); struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); +struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap); int omap_dm_timer_free(struct omap_dm_timer *timer); void omap_dm_timer_enable(struct omap_dm_timer *timer); void omap_dm_timer_disable(struct omap_dm_timer *timer); @@ -120,6 +149,7 @@ int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, i int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler); int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value); +int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask); unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer); int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value); @@ -245,33 +275,6 @@ int omap_dm_timers_active(void); #define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \ (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT)) -struct omap_dm_timer { - unsigned long phys_base; - int id; - int irq; - struct clk *fclk; - - void __iomem *io_base; - void __iomem *sys_stat; /* TISTAT timer status */ - void __iomem *irq_stat; /* TISR/IRQSTATUS interrupt status */ - void __iomem *irq_ena; /* irq enable */ - void __iomem *irq_dis; /* irq disable, only on v2 ip */ - void __iomem *pend; /* write pending */ - void __iomem *func_base; /* function register base */ - - unsigned long rate; - unsigned reserved:1; - unsigned posted:1; - struct timer_regs context; - int ctx_loss_count; - int revision; - u32 capability; - struct platform_device *pdev; - struct list_head node; -}; - -int omap_dm_timer_prepare(struct omap_dm_timer *timer); - static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg, int posted) { @@ -300,16 +303,13 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) tidr = __raw_readl(timer->io_base); if (!(tidr >> 16)) { timer->revision = 1; - timer->sys_stat = timer->io_base + - OMAP_TIMER_V1_SYS_STAT_OFFSET; timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET; timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET; - timer->irq_dis = NULL; + timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET; timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET; timer->func_base = timer->io_base; } else { timer->revision = 2; - timer->sys_stat = NULL; timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS; timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET; timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR; @@ -320,45 +320,44 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) } } -/* Assumes the source clock has been set by caller */ -static inline void __omap_dm_timer_reset(struct omap_dm_timer *timer, - int autoidle, int wakeup) +/* + * __omap_dm_timer_enable_posted - enables write posted mode + * @timer: pointer to timer instance handle + * + * Enables the write posted mode for the timer. When posted mode is enabled + * writes to certain timer registers are immediately acknowledged by the + * internal bus and hence prevents stalling the CPU waiting for the write to + * complete. Enabling this feature can improve performance for writing to the + * timer registers. + */ +static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer) { - u32 l; + if (timer->posted) + return; - l = __raw_readl(timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET); - l |= 0x02 << 3; /* Set to smart-idle mode */ - l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ + if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) + return; - if (autoidle) - l |= 0x1 << 0; - - if (wakeup) - l |= 1 << 2; - - __raw_writel(l, timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET); - - /* Match hardware reset default of posted mode */ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, - OMAP_TIMER_CTRL_POSTED, 0); + OMAP_TIMER_CTRL_POSTED, 0); + timer->context.tsicr = OMAP_TIMER_CTRL_POSTED; + timer->posted = OMAP_TIMER_POSTED; } -static inline int __omap_dm_timer_set_source(struct clk *timer_fck, - struct clk *parent) +/** + * __omap_dm_timer_override_errata - override errata flags for a timer + * @timer: pointer to timer handle + * @errata: errata flags to be ignored + * + * For a given timer, override a timer errata by clearing the flags + * specified by the errata argument. A specific erratum should only be + * overridden for a timer if the timer is used in such a way the erratum + * has no impact. + */ +static inline void __omap_dm_timer_override_errata(struct omap_dm_timer *timer, + u32 errata) { - int ret; - - clk_disable(timer_fck); - ret = clk_set_parent(timer_fck, parent); - clk_enable(timer_fck); - - /* - * When the functional clock disappears, too quick writes seem - * to cause an abort. XXX Is this still necessary? - */ - __delay(300000); - - return ret; + timer->errata &= ~errata; } static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer, diff --git a/arch/arm/plat-omap/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h index 7a9028cb5a75..7a9028cb5a75 100644 --- a/arch/arm/plat-omap/i2c.h +++ b/arch/arm/plat-omap/include/plat/i2c.h diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h new file mode 100644 index 000000000000..ba4525059a99 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -0,0 +1,16 @@ +int omap_sram_init(void); + +void omap_map_sram(unsigned long start, unsigned long size, + unsigned long skip, int cached); +void omap_sram_reset(void); + +extern void *omap_sram_push_address(unsigned long size); + +/* Macro to push a function to the internal SRAM, using the fncpy API */ +#define omap_sram_push(funcp, size) ({ \ + typeof(&(funcp)) _res = NULL; \ + void *_sram_address = omap_sram_push_address(size); \ + if (_sram_address) \ + _res = fncpy(_sram_address, &(funcp), size); \ + _res; \ +}) diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 70dcc225157f..743fc2836f7a 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -20,198 +20,20 @@ #include <linux/init.h> #include <linux/io.h> +#include <asm/fncpy.h> #include <asm/tlb.h> #include <asm/cacheflush.h> #include <asm/mach/map.h> -#include "../mach-omap1/soc.h" -#include "../mach-omap2/soc.h" - -#include "sram.h" - -/* XXX These "sideways" includes will disappear when sram.c becomes a driver */ -#include "../mach-omap2/iomap.h" -#include "../mach-omap2/prm2xxx_3xxx.h" -#include "../mach-omap2/sdrc.h" - -#define OMAP1_SRAM_PA 0x20000000 -#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) -#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) -#ifdef CONFIG_OMAP4_ERRATA_I688 -#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA -#else -#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) -#endif -#define OMAP5_SRAM_PA 0x40300000 - -#if defined(CONFIG_ARCH_OMAP2PLUS) -#define SRAM_BOOTLOADER_SZ 0x00 -#else -#define SRAM_BOOTLOADER_SZ 0x80 -#endif - -#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048) -#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050) -#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058) - -#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848) -#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850) -#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858) -#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880) -#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048) - -#define GP_DEVICE 0x300 - #define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) -static unsigned long omap_sram_start; static void __iomem *omap_sram_base; static unsigned long omap_sram_skip; static unsigned long omap_sram_size; static void __iomem *omap_sram_ceil; /* - * Depending on the target RAMFS firewall setup, the public usable amount of - * SRAM varies. The default accessible size for all device types is 2k. A GP - * device allows ARM11 but not other initiators for full size. This - * functionality seems ok until some nice security API happens. - */ -static int is_sram_locked(void) -{ - if (OMAP2_DEVICE_TYPE_GP == omap_type()) { - /* RAMFW: R/W access to all initiators for all qualifier sets */ - if (cpu_is_omap242x()) { - __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ - } - if (cpu_is_omap34xx()) { - __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ - __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); - __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); - } - return 0; - } else - return 1; /* assume locked with no PPA or security driver */ -} - -/* - * The amount of SRAM depends on the core type. - * Note that we cannot try to test for SRAM here because writes - * to secure SRAM will hang the system. Also the SRAM is not - * yet mapped at this point. - */ -static void __init omap_detect_sram(void) -{ - omap_sram_skip = SRAM_BOOTLOADER_SZ; - if (cpu_class_is_omap2()) { - if (is_sram_locked()) { - if (cpu_is_omap34xx()) { - omap_sram_start = OMAP3_SRAM_PUB_PA; - if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || - (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { - omap_sram_size = 0x7000; /* 28K */ - omap_sram_skip += SZ_16K; - } else { - omap_sram_size = 0x8000; /* 32K */ - } - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PUB_PA; - omap_sram_size = 0xa000; /* 40K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ - } else { - omap_sram_start = OMAP2_SRAM_PUB_PA; - omap_sram_size = 0x800; /* 2K */ - } - } else { - if (soc_is_am33xx()) { - omap_sram_start = AM33XX_SRAM_PA; - omap_sram_size = 0x10000; /* 64K */ - } else if (cpu_is_omap34xx()) { - omap_sram_start = OMAP3_SRAM_PA; - omap_sram_size = 0x10000; /* 64K */ - } else if (cpu_is_omap44xx()) { - omap_sram_start = OMAP4_SRAM_PA; - omap_sram_size = 0xe000; /* 56K */ - } else if (soc_is_omap54xx()) { - omap_sram_start = OMAP5_SRAM_PA; - omap_sram_size = SZ_128K; /* 128KB */ - } else { - omap_sram_start = OMAP2_SRAM_PA; - if (cpu_is_omap242x()) - omap_sram_size = 0xa0000; /* 640K */ - else if (cpu_is_omap243x()) - omap_sram_size = 0x10000; /* 64K */ - } - } - } else { - omap_sram_start = OMAP1_SRAM_PA; - - if (cpu_is_omap7xx()) - omap_sram_size = 0x32000; /* 200K */ - else if (cpu_is_omap15xx()) - omap_sram_size = 0x30000; /* 192K */ - else if (cpu_is_omap1610() || cpu_is_omap1611() || - cpu_is_omap1621() || cpu_is_omap1710()) - omap_sram_size = 0x4000; /* 16K */ - else { - pr_err("Could not detect SRAM size\n"); - omap_sram_size = 0x4000; - } - } -} - -/* - * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. - */ -static void __init omap_map_sram(void) -{ - int cached = 1; - - if (omap_sram_size == 0) - return; - -#ifdef CONFIG_OMAP4_ERRATA_I688 - if (cpu_is_omap44xx()) { - omap_sram_start += PAGE_SIZE; - omap_sram_size -= SZ_16K; - } -#endif - if (cpu_is_omap34xx()) { - /* - * SRAM must be marked as non-cached on OMAP3 since the - * CORE DPLL M2 divider change code (in SRAM) runs with the - * SDRAM controller disabled, and if it is marked cached, - * the ARM may attempt to write cache lines back to SDRAM - * which will cause the system to hang. - */ - cached = 0; - } - - omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE); - omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, - cached); - if (!omap_sram_base) { - pr_err("SRAM: Could not map\n"); - return; - } - - omap_sram_ceil = omap_sram_base + omap_sram_size; - - /* - * Looks like we need to preserve some bootloader code at the - * beginning of SRAM for jumping to flash for reboot to work... - */ - memset_io(omap_sram_base + omap_sram_skip, 0, - omap_sram_size - omap_sram_skip); -} - -/* * Memory allocator for SRAM: calculates the new ceiling address * for pushing a function using the fncpy API. * @@ -236,171 +58,39 @@ void *omap_sram_push_address(unsigned long size) return (void *)omap_sram_ceil; } -#ifdef CONFIG_ARCH_OMAP1 - -static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl); - -void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl) -{ - BUG_ON(!_omap_sram_reprogram_clock); - /* On 730, bit 13 must always be 1 */ - if (cpu_is_omap7xx()) - ckctl |= 0x2000; - _omap_sram_reprogram_clock(dpllctl, ckctl); -} - -static int __init omap1_sram_init(void) -{ - _omap_sram_reprogram_clock = - omap_sram_push(omap1_sram_reprogram_clock, - omap1_sram_reprogram_clock_sz); - - return 0; -} - -#else -#define omap1_sram_init() do {} while (0) -#endif - -#if defined(CONFIG_ARCH_OMAP2) - -static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); - -void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock) -{ - BUG_ON(!_omap2_sram_ddr_init); - _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl, - base_cs, force_unlock); -} - -static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val, - u32 mem_type); - -void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type) -{ - BUG_ON(!_omap2_sram_reprogram_sdrc); - _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type); -} - -static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass) -{ - BUG_ON(!_omap2_set_prcm); - return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass); -} -#endif - -#ifdef CONFIG_SOC_OMAP2420 -static int __init omap242x_sram_init(void) -{ - _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init, - omap242x_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc, - omap242x_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm, - omap242x_sram_set_prcm_sz); - - return 0; -} -#else -static inline int omap242x_sram_init(void) -{ - return 0; -} -#endif - -#ifdef CONFIG_SOC_OMAP2430 -static int __init omap243x_sram_init(void) -{ - _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init, - omap243x_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc, - omap243x_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm, - omap243x_sram_set_prcm_sz); - - return 0; -} -#else -static inline int omap243x_sram_init(void) -{ - return 0; -} -#endif - -#ifdef CONFIG_ARCH_OMAP3 - -static u32 (*_omap3_sram_configure_core_dpll)( - u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); - -u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, - u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, - u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, - u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, - u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) -{ - BUG_ON(!_omap3_sram_configure_core_dpll); - return _omap3_sram_configure_core_dpll( - m2, unlock_dll, f, inc, - sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, - sdrc_actim_ctrl_b_0, sdrc_mr_0, - sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, - sdrc_actim_ctrl_b_1, sdrc_mr_1); -} - -void omap3_sram_restore_context(void) +/* + * The SRAM context is lost during off-idle and stack + * needs to be reset. + */ +void omap_sram_reset(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; - - _omap3_sram_configure_core_dpll = - omap_sram_push(omap3_sram_configure_core_dpll, - omap3_sram_configure_core_dpll_sz); - omap_push_sram_idle(); } -static inline int omap34xx_sram_init(void) -{ - omap3_sram_restore_context(); - return 0; -} -#else -static inline int omap34xx_sram_init(void) -{ - return 0; -} -#endif /* CONFIG_ARCH_OMAP3 */ - -static inline int am33xx_sram_init(void) +/* + * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early. + */ +void __init omap_map_sram(unsigned long start, unsigned long size, + unsigned long skip, int cached) { - return 0; -} + if (size == 0) + return; -int __init omap_sram_init(void) -{ - omap_detect_sram(); - omap_map_sram(); + start = ROUND_DOWN(start, PAGE_SIZE); + omap_sram_size = size; + omap_sram_skip = skip; + omap_sram_base = __arm_ioremap_exec(start, size, cached); + if (!omap_sram_base) { + pr_err("SRAM: Could not map\n"); + return; + } - if (!(cpu_class_is_omap2())) - omap1_sram_init(); - else if (cpu_is_omap242x()) - omap242x_sram_init(); - else if (cpu_is_omap2430()) - omap243x_sram_init(); - else if (soc_is_am33xx()) - am33xx_sram_init(); - else if (cpu_is_omap34xx()) - omap34xx_sram_init(); + omap_sram_reset(); - return 0; + /* + * Looks like we need to preserve some bootloader code at the + * beginning of SRAM for jumping to flash for reboot to work... + */ + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); } diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index 1867944415ca..8db0b981ca64 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -41,7 +41,7 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) static int __init orion_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - int i = 0, irq_gpio; + int i = 0; void __iomem *base; do { @@ -54,10 +54,6 @@ static int __init orion_add_irq_domain(struct device_node *np, irq_domain_add_legacy(np, i * 32, 0, 0, &irq_domain_simple_ops, NULL); - - irq_gpio = i * 32; - orion_gpio_of_init(irq_gpio); - return 0; } diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index af8e484001e5..1fc941944912 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -5,7 +5,6 @@ obj-y := dma.o obj-$(CONFIG_PXA3xx) += mfp.o -obj-$(CONFIG_PXA95x) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o obj-$(CONFIG_PXA_SSP) += ssp.o diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 5c79c29f2833..10bc4f3757d1 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -423,7 +423,7 @@ typedef unsigned long mfp_cfg_t; ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) -#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) || defined(CONFIG_ARCH_MMP) +#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP) /* * each MFP pin will have a MFPR register, since the offset of the * register varies between processors, the processor specific code @@ -470,6 +470,6 @@ void mfp_write(int mfp, unsigned long mfpr_val); void mfp_config(unsigned long *mfp_cfgs, int num); void mfp_config_run(void); void mfp_config_lpm(void); -#endif /* CONFIG_PXA3xx || CONFIG_PXA95x || CONFIG_ARCH_MMP */ +#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */ #endif /* __ASM_PLAT_MFP_H */ diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index b1e05ccff3ac..37542c2689a2 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -344,7 +344,7 @@ static int s3c_adc_probe(struct platform_device *pdev) int ret; unsigned tmp; - adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL); + adc = devm_kzalloc(dev, sizeof(struct adc_device), GFP_KERNEL); if (adc == NULL) { dev_err(dev, "failed to allocate adc_device\n"); return -ENOMEM; @@ -355,50 +355,46 @@ static int s3c_adc_probe(struct platform_device *pdev) adc->pdev = pdev; adc->prescale = S3C2410_ADCCON_PRSCVL(49); - adc->vdd = regulator_get(dev, "vdd"); + adc->vdd = devm_regulator_get(dev, "vdd"); if (IS_ERR(adc->vdd)) { dev_err(dev, "operating without regulator \"vdd\" .\n"); - ret = PTR_ERR(adc->vdd); - goto err_alloc; + return PTR_ERR(adc->vdd); } adc->irq = platform_get_irq(pdev, 1); if (adc->irq <= 0) { dev_err(dev, "failed to get adc irq\n"); - ret = -ENOENT; - goto err_reg; + return -ENOENT; } - ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc); + ret = devm_request_irq(dev, adc->irq, s3c_adc_irq, 0, dev_name(dev), + adc); if (ret < 0) { dev_err(dev, "failed to attach adc irq\n"); - goto err_reg; + return ret; } - adc->clk = clk_get(dev, "adc"); + adc->clk = devm_clk_get(dev, "adc"); if (IS_ERR(adc->clk)) { dev_err(dev, "failed to get adc clock\n"); - ret = PTR_ERR(adc->clk); - goto err_irq; + return PTR_ERR(adc->clk); } regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) { dev_err(dev, "failed to find registers\n"); - ret = -ENXIO; - goto err_clk; + return -ENXIO; } - adc->regs = ioremap(regs->start, resource_size(regs)); + adc->regs = devm_request_and_ioremap(dev, regs); if (!adc->regs) { dev_err(dev, "failed to map registers\n"); - ret = -ENXIO; - goto err_clk; + return -ENXIO; } ret = regulator_enable(adc->vdd); if (ret) - goto err_ioremap; + return ret; clk_enable(adc->clk); @@ -418,32 +414,14 @@ static int s3c_adc_probe(struct platform_device *pdev) adc_dev = adc; return 0; - - err_ioremap: - iounmap(adc->regs); - err_clk: - clk_put(adc->clk); - - err_irq: - free_irq(adc->irq, adc); - err_reg: - regulator_put(adc->vdd); - err_alloc: - kfree(adc); - return ret; } static int __devexit s3c_adc_remove(struct platform_device *pdev) { struct adc_device *adc = platform_get_drvdata(pdev); - iounmap(adc->regs); - free_irq(adc->irq, adc); clk_disable(adc->clk); regulator_disable(adc->vdd); - regulator_put(adc->vdd); - clk_put(adc->clk); - kfree(adc); return 0; } diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 03f654d55eff..bc50b20a8ffc 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -486,11 +486,7 @@ static struct resource s3c_i2c0_resource[] = { struct platform_device s3c_device_i2c0 = { .name = "s3c2410-i2c", -#ifdef CONFIG_S3C_DEV_I2C1 .id = 0, -#else - .id = -1, -#endif .num_resources = ARRAY_SIZE(s3c_i2c0_resource), .resource = s3c_i2c0_resource, }; @@ -933,6 +929,7 @@ struct platform_device s5p_device_mfc_r = { .coherent_dma_mask = DMA_BIT_MASK(32), }, }; + #endif /* CONFIG_S5P_DEV_MFC */ /* MIPI CSIS */ diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 5da4b4f38f40..133e3e4170fb 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -133,8 +133,6 @@ extern struct platform_device exynos4_device_pcm1; extern struct platform_device exynos4_device_pcm2; extern struct platform_device exynos4_device_spdif; -extern struct platform_device exynos_device_drm; - extern struct platform_device samsung_asoc_dma; extern struct platform_device samsung_asoc_idma; extern struct platform_device samsung_device_keypad; diff --git a/arch/arm/plat-samsung/include/plat/mfc.h b/arch/arm/plat-samsung/include/plat/mfc.h index ac13227272f0..e6d7c42d68b6 100644 --- a/arch/arm/plat-samsung/include/plat/mfc.h +++ b/arch/arm/plat-samsung/include/plat/mfc.h @@ -10,6 +10,14 @@ #ifndef __PLAT_SAMSUNG_MFC_H #define __PLAT_SAMSUNG_MFC_H __FILE__ +struct s5p_mfc_dt_meminfo { + unsigned long loff; + unsigned long lsize; + unsigned long roff; + unsigned long rsize; + char *compatible; +}; + /** * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver * @rbase: base address for MFC 'right' memory interface @@ -24,4 +32,7 @@ void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, phys_addr_t lbase, unsigned int lsize); +int __init s5p_fdt_find_mfc_mem(unsigned long node, const char *uname, + int depth, void *data); + #endif /* __PLAT_SAMSUNG_MFC_H */ diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c index ad6089465e2a..5ec104b5408b 100644 --- a/arch/arm/plat-samsung/s5p-dev-mfc.c +++ b/arch/arm/plat-samsung/s5p-dev-mfc.c @@ -14,6 +14,8 @@ #include <linux/dma-mapping.h> #include <linux/memblock.h> #include <linux/ioport.h> +#include <linux/of_fdt.h> +#include <linux/of.h> #include <mach/map.h> #include <plat/devs.h> @@ -69,3 +71,35 @@ static int __init s5p_mfc_memory_init(void) return 0; } device_initcall(s5p_mfc_memory_init); + +#ifdef CONFIG_OF +int __init s5p_fdt_find_mfc_mem(unsigned long node, const char *uname, + int depth, void *data) +{ + __be32 *prop; + unsigned long len; + struct s5p_mfc_dt_meminfo *mfc_mem = data; + + if (!data) + return 0; + + if (!of_flat_dt_is_compatible(node, mfc_mem->compatible)) + return 0; + + prop = of_get_flat_dt_prop(node, "samsung,mfc-l", &len); + if (!prop || (len != 2 * sizeof(unsigned long))) + return 0; + + mfc_mem->loff = be32_to_cpu(prop[0]); + mfc_mem->lsize = be32_to_cpu(prop[1]); + + prop = of_get_flat_dt_prop(node, "samsung,mfc-r", &len); + if (!prop || (len != 2 * sizeof(unsigned long))) + return 0; + + mfc_mem->roff = be32_to_cpu(prop[0]); + mfc_mem->rsize = be32_to_cpu(prop[1]); + + return 1; +} +#endif diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h index 67e489d8d1bd..2df26b57c26a 100644 --- a/arch/m68k/include/asm/signal.h +++ b/arch/m68k/include/asm/signal.h @@ -41,7 +41,7 @@ struct k_sigaction { static inline void sigaddset(sigset_t *set, int _sig) { asm ("bfset %0{%1,#1}" - : "+od" (*set) + : "+o" (*set) : "id" ((_sig - 1) ^ 31) : "cc"); } @@ -49,7 +49,7 @@ static inline void sigaddset(sigset_t *set, int _sig) static inline void sigdelset(sigset_t *set, int _sig) { asm ("bfclr %0{%1,#1}" - : "+od" (*set) + : "+o" (*set) : "id" ((_sig - 1) ^ 31) : "cc"); } @@ -65,7 +65,7 @@ static inline int __gen_sigismember(sigset_t *set, int _sig) int ret; asm ("bfextu %1{%2,#1},%0" : "=d" (ret) - : "od" (*set), "id" ((_sig-1) ^ 31) + : "o" (*set), "id" ((_sig-1) ^ 31) : "cc"); return ret; } diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index a53f8ec37aac..290dc6a1d7a3 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -79,7 +79,7 @@ static struct resource data_resource = { .name = "Kernel data", }; void __init add_memory_region(phys_t start, phys_t size, long type) { int x = boot_mem_map.nr_map; - struct boot_mem_map_entry *prev = boot_mem_map.map + x - 1; + int i; /* Sanity check */ if (start + size < start) { @@ -88,15 +88,29 @@ void __init add_memory_region(phys_t start, phys_t size, long type) } /* - * Try to merge with previous entry if any. This is far less than - * perfect but is sufficient for most real world cases. + * Try to merge with existing entry, if any. */ - if (x && prev->addr + prev->size == start && prev->type == type) { - prev->size += size; + for (i = 0; i < boot_mem_map.nr_map; i++) { + struct boot_mem_map_entry *entry = boot_mem_map.map + i; + unsigned long top; + + if (entry->type != type) + continue; + + if (start + size < entry->addr) + continue; /* no overlap */ + + if (entry->addr + entry->size < start) + continue; /* no overlap */ + + top = max(entry->addr + entry->size, start + size); + entry->addr = min(entry->addr, start); + entry->size = top - entry->addr; + return; } - if (x == BOOT_MEM_MAP_MAX) { + if (boot_mem_map.nr_map == BOOT_MEM_MAP_MAX) { pr_err("Ooops! Too many entries in the memory map!\n"); return; } diff --git a/arch/mips/lib/mips-atomic.c b/arch/mips/lib/mips-atomic.c index e091430dbeb1..cd160be3ce4d 100644 --- a/arch/mips/lib/mips-atomic.c +++ b/arch/mips/lib/mips-atomic.c @@ -56,7 +56,7 @@ __asm__( " .set pop \n" " .endm \n"); -void arch_local_irq_disable(void) +notrace void arch_local_irq_disable(void) { preempt_disable(); __asm__ __volatile__( @@ -93,7 +93,7 @@ __asm__( " .set pop \n" " .endm \n"); -unsigned long arch_local_irq_save(void) +notrace unsigned long arch_local_irq_save(void) { unsigned long flags; preempt_disable(); @@ -135,7 +135,7 @@ __asm__( " .set pop \n" " .endm \n"); -void arch_local_irq_restore(unsigned long flags) +notrace void arch_local_irq_restore(unsigned long flags) { unsigned long __tmp1; @@ -159,7 +159,7 @@ void arch_local_irq_restore(unsigned long flags) EXPORT_SYMBOL(arch_local_irq_restore); -void __arch_local_irq_restore(unsigned long flags) +notrace void __arch_local_irq_restore(unsigned long flags) { unsigned long __tmp1; diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c index fd49aeda9eb8..5dede04f2f3e 100644 --- a/arch/parisc/kernel/signal32.c +++ b/arch/parisc/kernel/signal32.c @@ -65,7 +65,8 @@ put_sigset32(compat_sigset_t __user *up, sigset_t *set, size_t sz) { compat_sigset_t s; - if (sz != sizeof *set) panic("put_sigset32()"); + if (sz != sizeof *set) + return -EINVAL; sigset_64to32(&s, set); return copy_to_user(up, &s, sizeof s); @@ -77,7 +78,8 @@ get_sigset32(compat_sigset_t __user *up, sigset_t *set, size_t sz) compat_sigset_t s; int r; - if (sz != sizeof *set) panic("put_sigset32()"); + if (sz != sizeof *set) + return -EINVAL; if ((r = copy_from_user(&s, up, sz)) == 0) { sigset_32to64(set, &s); diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index 7426e40699bd..f76c10863c62 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -73,6 +73,8 @@ static unsigned long get_shared_area(struct address_space *mapping, struct vm_area_struct *vma; int offset = mapping ? get_offset(mapping) : 0; + offset = (offset + (pgoff << PAGE_SHIFT)) & 0x3FF000; + addr = DCACHE_ALIGN(addr - offset) + offset; for (vma = find_vma(current->mm, addr); ; vma = vma->vm_next) { diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi index 7ab286ab5300..39ed65a44c5f 100644 --- a/arch/powerpc/boot/dts/mpc5200b.dtsi +++ b/arch/powerpc/boot/dts/mpc5200b.dtsi @@ -231,6 +231,12 @@ interrupts = <2 7 0>; }; + sclpc@3c00 { + compatible = "fsl,mpc5200-lpbfifo"; + reg = <0x3c00 0x60>; + interrupts = <2 23 0>; + }; + i2c@3d00 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi index 3444eb8f0ade..24f668039295 100644 --- a/arch/powerpc/boot/dts/o2d.dtsi +++ b/arch/powerpc/boot/dts/o2d.dtsi @@ -86,12 +86,6 @@ reg = <0>; }; }; - - sclpc@3c00 { - compatible = "fsl,mpc5200-lpbfifo"; - reg = <0x3c00 0x60>; - interrupts = <3 23 0>; - }; }; localbus { diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts index 9e354997eb7e..96512c058033 100644 --- a/arch/powerpc/boot/dts/pcm030.dts +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -59,7 +59,7 @@ #gpio-cells = <2>; }; - psc@2000 { /* PSC1 in ac97 mode */ + audioplatform: psc@2000 { /* PSC1 in ac97 mode */ compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; cell-index = <0>; }; @@ -134,4 +134,9 @@ localbus { status = "disabled"; }; + + sound { + compatible = "phytec,pcm030-audio-fabric"; + asoc-platform = <&audioplatform>; + }; }; diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c index 8520b58a5e9a..b89ef65392dc 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c @@ -372,10 +372,11 @@ static int mpc52xx_irqhost_map(struct irq_domain *h, unsigned int virq, case MPC52xx_IRQ_L1_MAIN: irqchip = &mpc52xx_main_irqchip; break; case MPC52xx_IRQ_L1_PERP: irqchip = &mpc52xx_periph_irqchip; break; case MPC52xx_IRQ_L1_SDMA: irqchip = &mpc52xx_sdma_irqchip; break; - default: - pr_err("%s: invalid irq: virq=%i, l1=%i, l2=%i\n", - __func__, virq, l1irq, l2irq); - return -EINVAL; + case MPC52xx_IRQ_L1_CRIT: + pr_warn("%s: Critical IRQ #%d is unsupported! Nopping it.\n", + __func__, l2irq); + irq_set_chip(virq, &no_irq_chip); + return 0; } irq_set_chip_and_handler(virq, irqchip, handle_level_irq); diff --git a/arch/powerpc/platforms/pseries/eeh_pe.c b/arch/powerpc/platforms/pseries/eeh_pe.c index 797cd181dc3f..d16c8ded1084 100644 --- a/arch/powerpc/platforms/pseries/eeh_pe.c +++ b/arch/powerpc/platforms/pseries/eeh_pe.c @@ -449,7 +449,7 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe) if (list_empty(&pe->edevs)) { cnt = 0; list_for_each_entry(child, &pe->child_list, child) { - if (!(pe->type & EEH_PE_INVALID)) { + if (!(child->type & EEH_PE_INVALID)) { cnt++; break; } diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index d19f4977c834..e5b084723131 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -220,7 +220,8 @@ static struct device_node *find_pe_dn(struct pci_dev *dev, int *total) /* Get the top level device in the PE */ edev = of_node_to_eeh_dev(dn); - edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list); + if (edev->pe) + edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list); dn = eeh_dev_to_of_node(edev); if (!dn) return NULL; diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h index f93003123bce..67c62578d170 100644 --- a/arch/sparc/include/asm/prom.h +++ b/arch/sparc/include/asm/prom.h @@ -63,10 +63,13 @@ extern char *of_console_options; extern void irq_trans_init(struct device_node *dp); extern char *build_path_component(struct device_node *dp); -/* SPARC has a local implementation */ +/* SPARC has local implementations */ extern int of_address_to_resource(struct device_node *dev, int index, struct resource *r); #define of_address_to_resource of_address_to_resource +void __iomem *of_iomap(struct device_node *node, int index); +#define of_iomap of_iomap + #endif /* __KERNEL__ */ #endif /* _SPARC_PROM_H */ diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c index 867de2f8189c..689e1ba62809 100644 --- a/arch/sparc/kernel/signal_64.c +++ b/arch/sparc/kernel/signal_64.c @@ -295,9 +295,7 @@ void do_rt_sigreturn(struct pt_regs *regs) err |= restore_fpu_state(regs, fpu_save); err |= __copy_from_user(&set, &sf->mask, sizeof(sigset_t)); - err |= do_sigaltstack(&sf->stack, NULL, (unsigned long)sf); - - if (err) + if (err || do_sigaltstack(&sf->stack, NULL, (unsigned long)sf) == -EFAULT) goto segv; err |= __get_user(rwin_save, &sf->rwin_save); diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index c760e073963e..e87b0cac14b5 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -12,6 +12,8 @@ #include <asm/setup.h> #include <asm/desc.h> +#undef memcpy /* Use memcpy from misc.c */ + #include "eboot.h" static efi_system_table_t *sys_table; diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index 2a017441b8b2..8c132a625b94 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -476,6 +476,3 @@ die: setup_corrupt: .byte 7 .string "No setup signature found...\n" - - .data -dummy: .long 0 diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index dcfde52979c3..19f16ebaf4fa 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -205,21 +205,14 @@ static inline bool user_64bit_mode(struct pt_regs *regs) } #endif -/* - * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode - * when it traps. The previous stack will be directly underneath the saved - * registers, and 'sp/ss' won't even have been saved. Thus the '®s->sp'. - * - * This is valid only for kernel mode traps. - */ -static inline unsigned long kernel_stack_pointer(struct pt_regs *regs) -{ #ifdef CONFIG_X86_32 - return (unsigned long)(®s->sp); +extern unsigned long kernel_stack_pointer(struct pt_regs *regs); #else +static inline unsigned long kernel_stack_pointer(struct pt_regs *regs) +{ return regs->sp; -#endif } +#endif #define GET_IP(regs) ((regs)->ip) #define GET_FP(regs) ((regs)->bp) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index f7e98a2c0d12..1b7d1656a042 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -631,6 +631,20 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) } } + /* + * The way access filter has a performance penalty on some workloads. + * Disable it on the affected CPUs. + */ + if ((c->x86 == 0x15) && + (c->x86_model >= 0x02) && (c->x86_model < 0x20)) { + u64 val; + + if (!rdmsrl_safe(0xc0011021, &val) && !(val & 0x1E)) { + val |= 0x1E; + wrmsrl_safe(0xc0011021, val); + } + } + cpu_detect_cache_sizes(c); /* Multi core CPU? */ diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index 698b6ec12e0f..1ac581f38dfa 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -6,7 +6,7 @@ * * Written by Jacob Shin - AMD, Inc. * - * Support: borislav.petkov@amd.com + * Maintained by: Borislav Petkov <bp@alien8.de> * * April 2006 * - added support for AMD Family 0x10 processors diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c index 5f88abf07e9c..4f9a3cbfc4a3 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c @@ -285,34 +285,39 @@ void cmci_clear(void) raw_spin_unlock_irqrestore(&cmci_discover_lock, flags); } +static long cmci_rediscover_work_func(void *arg) +{ + int banks; + + /* Recheck banks in case CPUs don't all have the same */ + if (cmci_supported(&banks)) + cmci_discover(banks); + + return 0; +} + /* * After a CPU went down cycle through all the others and rediscover * Must run in process context. */ void cmci_rediscover(int dying) { - int banks; - int cpu; - cpumask_var_t old; + int cpu, banks; if (!cmci_supported(&banks)) return; - if (!alloc_cpumask_var(&old, GFP_KERNEL)) - return; - cpumask_copy(old, ¤t->cpus_allowed); for_each_online_cpu(cpu) { if (cpu == dying) continue; - if (set_cpus_allowed_ptr(current, cpumask_of(cpu))) + + if (cpu == smp_processor_id()) { + cmci_rediscover_work_func(NULL); continue; - /* Recheck banks in case CPUs don't all have the same */ - if (cmci_supported(&banks)) - cmci_discover(banks); - } + } - set_cpus_allowed_ptr(current, old); - free_cpumask_var(old); + work_on_cpu(cpu, cmci_rediscover_work_func, NULL); + } } /* diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index b51b2c7ee51f..1328fe49a3f1 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -995,8 +995,8 @@ END(interrupt) */ .p2align CONFIG_X86_L1_CACHE_SHIFT common_interrupt: - ASM_CLAC XCPT_FRAME + ASM_CLAC addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */ interrupt do_IRQ /* 0(%rsp): old_rsp-ARGOFFSET */ @@ -1135,8 +1135,8 @@ END(common_interrupt) */ .macro apicinterrupt num sym do_sym ENTRY(\sym) - ASM_CLAC INTR_FRAME + ASM_CLAC pushq_cfi $~(\num) .Lcommon_\sym: interrupt \do_sym @@ -1190,8 +1190,8 @@ apicinterrupt IRQ_WORK_VECTOR \ */ .macro zeroentry sym do_sym ENTRY(\sym) - ASM_CLAC INTR_FRAME + ASM_CLAC PARAVIRT_ADJUST_EXCEPTION_FRAME pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ subq $ORIG_RAX-R15, %rsp @@ -1208,8 +1208,8 @@ END(\sym) .macro paranoidzeroentry sym do_sym ENTRY(\sym) - ASM_CLAC INTR_FRAME + ASM_CLAC PARAVIRT_ADJUST_EXCEPTION_FRAME pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ subq $ORIG_RAX-R15, %rsp @@ -1227,8 +1227,8 @@ END(\sym) #define INIT_TSS_IST(x) PER_CPU_VAR(init_tss) + (TSS_ist + ((x) - 1) * 8) .macro paranoidzeroentry_ist sym do_sym ist ENTRY(\sym) - ASM_CLAC INTR_FRAME + ASM_CLAC PARAVIRT_ADJUST_EXCEPTION_FRAME pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ subq $ORIG_RAX-R15, %rsp @@ -1247,8 +1247,8 @@ END(\sym) .macro errorentry sym do_sym ENTRY(\sym) - ASM_CLAC XCPT_FRAME + ASM_CLAC PARAVIRT_ADJUST_EXCEPTION_FRAME subq $ORIG_RAX-R15, %rsp CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15 @@ -1266,8 +1266,8 @@ END(\sym) /* error code is on the stack already */ .macro paranoiderrorentry sym do_sym ENTRY(\sym) - ASM_CLAC XCPT_FRAME + ASM_CLAC PARAVIRT_ADJUST_EXCEPTION_FRAME subq $ORIG_RAX-R15, %rsp CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15 diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 7720ff5a9ee2..efdec7cd8e01 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -8,8 +8,8 @@ * Tigran Aivazian <tigran@aivazian.fsnet.co.uk> * * Maintainers: - * Andreas Herrmann <andreas.herrmann3@amd.com> - * Borislav Petkov <borislav.petkov@amd.com> + * Andreas Herrmann <herrmann.der.user@googlemail.com> + * Borislav Petkov <bp@alien8.de> * * This driver allows to upgrade microcode on F10h AMD * CPUs and later. @@ -190,6 +190,7 @@ static unsigned int verify_patch_size(int cpu, u32 patch_size, #define F1XH_MPB_MAX_SIZE 2048 #define F14H_MPB_MAX_SIZE 1824 #define F15H_MPB_MAX_SIZE 4096 +#define F16H_MPB_MAX_SIZE 3458 switch (c->x86) { case 0x14: @@ -198,6 +199,9 @@ static unsigned int verify_patch_size(int cpu, u32 patch_size, case 0x15: max_size = F15H_MPB_MAX_SIZE; break; + case 0x16: + max_size = F16H_MPB_MAX_SIZE; + break; default: max_size = F1XH_MPB_MAX_SIZE; break; diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index b00b33a18390..5e0596b0632e 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -22,6 +22,7 @@ #include <linux/perf_event.h> #include <linux/hw_breakpoint.h> #include <linux/rcupdate.h> +#include <linux/module.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -166,6 +167,35 @@ static inline bool invalid_selector(u16 value) #define FLAG_MASK FLAG_MASK_32 +/* + * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode + * when it traps. The previous stack will be directly underneath the saved + * registers, and 'sp/ss' won't even have been saved. Thus the '®s->sp'. + * + * Now, if the stack is empty, '®s->sp' is out of range. In this + * case we try to take the previous stack. To always return a non-null + * stack pointer we fall back to regs as stack if no previous stack + * exists. + * + * This is valid only for kernel mode traps. + */ +unsigned long kernel_stack_pointer(struct pt_regs *regs) +{ + unsigned long context = (unsigned long)regs & ~(THREAD_SIZE - 1); + unsigned long sp = (unsigned long)®s->sp; + struct thread_info *tinfo; + + if (context == (sp & ~(THREAD_SIZE - 1))) + return sp; + + tinfo = (struct thread_info *)context; + if (tinfo->previous_esp) + return tinfo->previous_esp; + + return (unsigned long)regs; +} +EXPORT_SYMBOL_GPL(kernel_stack_pointer); + static unsigned long *pt_regs_access(struct pt_regs *regs, unsigned long regno) { BUILD_BUG_ON(offsetof(struct pt_regs, bx) != 0); diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c index 0777f042e400..60f926cd8b0e 100644 --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -197,7 +197,7 @@ void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start, } if (end == TLB_FLUSH_ALL || tlb_flushall_shift == -1 - || vmflag == VM_HUGETLB) { + || vmflag & VM_HUGETLB) { local_flush_tlb(); goto flush_all; } diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c index 41bd2a2d2c50..b914e20b5a00 100644 --- a/arch/x86/pci/ce4100.c +++ b/arch/x86/pci/ce4100.c @@ -115,6 +115,16 @@ static void sata_revid_read(struct sim_dev_reg *reg, u32 *value) reg_read(reg, value); } +static void reg_noirq_read(struct sim_dev_reg *reg, u32 *value) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&pci_config_lock, flags); + /* force interrupt pin value to 0 */ + *value = reg->sim_reg.value & 0xfff00ff; + raw_spin_unlock_irqrestore(&pci_config_lock, flags); +} + static struct sim_dev_reg bus1_fixups[] = { DEFINE_REG(2, 0, 0x10, (16*MB), reg_init, reg_read, reg_write) DEFINE_REG(2, 0, 0x14, (256), reg_init, reg_read, reg_write) @@ -144,6 +154,7 @@ static struct sim_dev_reg bus1_fixups[] = { DEFINE_REG(11, 5, 0x10, (64*KB), reg_init, reg_read, reg_write) DEFINE_REG(11, 6, 0x10, (256), reg_init, reg_read, reg_write) DEFINE_REG(11, 7, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(11, 7, 0x3c, 256, reg_init, reg_noirq_read, reg_write) DEFINE_REG(12, 0, 0x10, (128*KB), reg_init, reg_read, reg_write) DEFINE_REG(12, 0, 0x14, (256), reg_init, reg_read, reg_write) DEFINE_REG(12, 1, 0x10, (1024), reg_init, reg_read, reg_write) @@ -161,8 +172,10 @@ static struct sim_dev_reg bus1_fixups[] = { DEFINE_REG(16, 0, 0x10, (64*KB), reg_init, reg_read, reg_write) DEFINE_REG(16, 0, 0x14, (64*MB), reg_init, reg_read, reg_write) DEFINE_REG(16, 0, 0x18, (64*MB), reg_init, reg_read, reg_write) + DEFINE_REG(16, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write) DEFINE_REG(17, 0, 0x10, (128*KB), reg_init, reg_read, reg_write) DEFINE_REG(18, 0, 0x10, (1*KB), reg_init, reg_read, reg_write) + DEFINE_REG(18, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write) }; static void __init init_sim_regs(void) diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c index 4c61b52191eb..92525cb8e54c 100644 --- a/arch/x86/platform/ce4100/ce4100.c +++ b/arch/x86/platform/ce4100/ce4100.c @@ -21,12 +21,25 @@ #include <asm/i8259.h> #include <asm/io.h> #include <asm/io_apic.h> +#include <asm/emergency-restart.h> static int ce4100_i8042_detect(void) { return 0; } +/* + * The CE4100 platform has an internal 8051 Microcontroller which is + * responsible for signaling to the external Power Management Unit the + * intention to reset, reboot or power off the system. This 8051 device has + * its command register mapped at I/O port 0xcf9 and the value 0x4 is used + * to power off the system. + */ +static void ce4100_power_off(void) +{ + outb(0x4, 0xcf9); +} + #ifdef CONFIG_SERIAL_8250 static unsigned int mem_serial_in(struct uart_port *p, int offset) @@ -139,8 +152,19 @@ void __init x86_ce4100_early_setup(void) x86_init.mpparse.find_smp_config = x86_init_noop; x86_init.pci.init = ce4100_pci_init; + /* + * By default, the reboot method is ACPI which is supported by the + * CE4100 bootloader CEFDK using FADT.ResetReg Address and ResetValue + * the bootloader will however issue a system power off instead of + * reboot. By using BOOT_KBD we ensure proper system reboot as + * expected. + */ + reboot_type = BOOT_KBD; + #ifdef CONFIG_X86_IO_APIC x86_init.pci.init_irq = sdv_pci_init; x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck; #endif + + pm_power_off = ce4100_power_off; } diff --git a/block/blk-exec.c b/block/blk-exec.c index 8b6dc5bd4dd0..f71eac35c1b9 100644 --- a/block/blk-exec.c +++ b/block/blk-exec.c @@ -52,11 +52,17 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk, rq_end_io_fn *done) { int where = at_head ? ELEVATOR_INSERT_FRONT : ELEVATOR_INSERT_BACK; + bool is_pm_resume; WARN_ON(irqs_disabled()); rq->rq_disk = bd_disk; rq->end_io = done; + /* + * need to check this before __blk_run_queue(), because rq can + * be freed before that returns. + */ + is_pm_resume = rq->cmd_type == REQ_TYPE_PM_RESUME; spin_lock_irq(q->queue_lock); @@ -71,7 +77,7 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk, __elv_add_request(q, rq, where); __blk_run_queue(q); /* the queue is stopped so it won't be run */ - if (rq->cmd_type == REQ_TYPE_PM_RESUME) + if (is_pm_resume) q->request_fn(q); spin_unlock_irq(q->queue_lock); } diff --git a/drivers/amba/tegra-ahb.c b/drivers/amba/tegra-ahb.c index 0b6f0b28a487..bd5de08ad6fd 100644 --- a/drivers/amba/tegra-ahb.c +++ b/drivers/amba/tegra-ahb.c @@ -24,6 +24,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/tegra-ahb.h> #define DRV_NAME "tegra-ahb" diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index b1ae48054dc5..b7078afddb74 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -238,7 +238,7 @@ static int __devexit ahci_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ahci_suspend(struct device *dev) { struct ahci_platform_data *pdata = dev_get_platdata(dev); diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index fd9ecf74e631..5b0ba3f20edc 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -1105,10 +1105,15 @@ static int ata_acpi_bind_device(struct ata_port *ap, struct scsi_device *sdev, struct acpi_device *acpi_dev; struct acpi_device_power_state *states; - if (ap->flags & ATA_FLAG_ACPI_SATA) - ata_dev = &ap->link.device[sdev->channel]; - else + if (ap->flags & ATA_FLAG_ACPI_SATA) { + if (!sata_pmp_attached(ap)) + ata_dev = &ap->link.device[sdev->id]; + else + ata_dev = &ap->pmp_link[sdev->channel].device[sdev->id]; + } + else { ata_dev = &ap->link.device[sdev->id]; + } *handle = ata_dev_acpi_handle(ata_dev); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 3cc7096cfda7..f46fbd3bd3fb 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2942,6 +2942,10 @@ const struct ata_timing *ata_timing_find_mode(u8 xfer_mode) if (xfer_mode == t->mode) return t; + + WARN_ONCE(true, "%s: unable to find timing for xfer_mode 0x%x\n", + __func__, xfer_mode); + return NULL; } diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index e3bda074fa12..a6df6a351d6e 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1052,6 +1052,8 @@ static void ata_scsi_sdev_config(struct scsi_device *sdev) { sdev->use_10_for_rw = 1; sdev->use_10_for_ms = 1; + sdev->no_report_opcodes = 1; + sdev->no_write_same = 1; /* Schedule policy is determined by ->qc_defer() callback and * it needs to see every deferred qc. Set dev_blocked to 1 to diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index 26201ebef3ca..371fd2c698b7 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -317,6 +317,12 @@ static int cf_init(struct arasan_cf_dev *acdev) return ret; } + ret = clk_set_rate(acdev->clk, 166000000); + if (ret) { + dev_warn(acdev->host->dev, "clock set rate failed"); + return ret; + } + spin_lock_irqsave(&acdev->host->lock, flags); /* configure CF interface clock */ writel((pdata->cf_if_clk <= CF_IF_CLK_200M) ? pdata->cf_if_clk : @@ -908,7 +914,7 @@ static int __devexit arasan_cf_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int arasan_cf_suspend(struct device *dev) { struct ata_host *host = dev_get_drvdata(dev); diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c index 0d7c4c2cd26f..400bf1c3e982 100644 --- a/drivers/ata/sata_highbank.c +++ b/drivers/ata/sata_highbank.c @@ -260,7 +260,7 @@ static const struct of_device_id ahci_of_match[] = { }; MODULE_DEVICE_TABLE(of, ahci_of_match); -static int __init ahci_highbank_probe(struct platform_device *pdev) +static int __devinit ahci_highbank_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; @@ -378,7 +378,7 @@ static int __devexit ahci_highbank_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ahci_highbank_suspend(struct device *dev) { struct ata_host *host = dev_get_drvdata(dev); diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 44a4256533e1..08608de87e4e 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -142,6 +142,39 @@ static int k2_sata_scr_write(struct ata_link *link, return 0; } +static int k2_sata_softreset(struct ata_link *link, + unsigned int *class, unsigned long deadline) +{ + u8 dmactl; + void __iomem *mmio = link->ap->ioaddr.bmdma_addr; + + dmactl = readb(mmio + ATA_DMA_CMD); + + /* Clear the start bit */ + if (dmactl & ATA_DMA_START) { + dmactl &= ~ATA_DMA_START; + writeb(dmactl, mmio + ATA_DMA_CMD); + } + + return ata_sff_softreset(link, class, deadline); +} + +static int k2_sata_hardreset(struct ata_link *link, + unsigned int *class, unsigned long deadline) +{ + u8 dmactl; + void __iomem *mmio = link->ap->ioaddr.bmdma_addr; + + dmactl = readb(mmio + ATA_DMA_CMD); + + /* Clear the start bit */ + if (dmactl & ATA_DMA_START) { + dmactl &= ~ATA_DMA_START; + writeb(dmactl, mmio + ATA_DMA_CMD); + } + + return sata_sff_hardreset(link, class, deadline); +} static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { @@ -346,6 +379,8 @@ static struct scsi_host_template k2_sata_sht = { static struct ata_port_operations k2_sata_ops = { .inherits = &ata_bmdma_port_ops, + .softreset = k2_sata_softreset, + .hardreset = k2_sata_hardreset, .sff_tf_load = k2_sata_tf_load, .sff_tf_read = k2_sata_tf_read, .sff_check_status = k2_stat_check_status, diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c index 74a67e0019a2..fbbd4ed2edf2 100644 --- a/drivers/base/power/qos.c +++ b/drivers/base/power/qos.c @@ -451,7 +451,7 @@ int dev_pm_qos_add_ancestor_request(struct device *dev, if (ancestor) error = dev_pm_qos_add_request(ancestor, req, value); - if (error) + if (error < 0) req->dev = NULL; return error; diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index 3804a0af3ef1..9fe4f1865558 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -935,7 +935,7 @@ aoe_end_request(struct aoedev *d, struct request *rq, int fastfail) /* cf. http://lkml.org/lkml/2006/10/31/28 */ if (!fastfail) - q->request_fn(q); + __blk_run_queue(q); } static void diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 1c49d7173966..2ddd64a9ffde 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4330,6 +4330,7 @@ out_unreg_region: out_unreg_blkdev: unregister_blkdev(FLOPPY_MAJOR, "fd"); out_put_disk: + destroy_workqueue(floppy_wq); for (drive = 0; drive < N_DRIVE; drive++) { if (!disks[drive]) break; @@ -4340,7 +4341,6 @@ out_put_disk: } put_disk(disks[drive]); } - destroy_workqueue(floppy_wq); return err; } @@ -4555,6 +4555,8 @@ static void __exit floppy_module_exit(void) unregister_blkdev(FLOPPY_MAJOR, "fd"); platform_driver_unregister(&floppy_driver); + destroy_workqueue(floppy_wq); + for (drive = 0; drive < N_DRIVE; drive++) { del_timer_sync(&motor_off_timer[drive]); @@ -4578,7 +4580,6 @@ static void __exit floppy_module_exit(void) cancel_delayed_work_sync(&fd_timeout); cancel_delayed_work_sync(&fd_timer); - destroy_workqueue(floppy_wq); if (atomic_read(&usage_count)) floppy_release_irq_and_dma(); diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index adc6f36564cf..9694dd99bbbc 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -559,7 +559,7 @@ static void mtip_timeout_function(unsigned long int data) struct mtip_cmd *command; int tag, cmdto_cnt = 0; unsigned int bit, group; - unsigned int num_command_slots = port->dd->slot_groups * 32; + unsigned int num_command_slots; unsigned long to, tagaccum[SLOTBITS_IN_LONGS]; if (unlikely(!port)) @@ -572,6 +572,7 @@ static void mtip_timeout_function(unsigned long int data) } /* clear the tag accumulator */ memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long)); + num_command_slots = port->dd->slot_groups * 32; for (tag = 0; tag < num_command_slots; tag++) { /* @@ -2218,8 +2219,8 @@ static int exec_drive_taskfile(struct driver_data *dd, fis.device); /* check for erase mode support during secure erase.*/ - if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) - && (outbuf[0] & MTIP_SEC_ERASE_MODE)) { + if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) && outbuf && + (outbuf[0] & MTIP_SEC_ERASE_MODE)) { erasemode = 1; } @@ -2439,7 +2440,7 @@ static int mtip_hw_ioctl(struct driver_data *dd, unsigned int cmd, * return value * None */ -static void mtip_hw_submit_io(struct driver_data *dd, sector_t start, +static void mtip_hw_submit_io(struct driver_data *dd, sector_t sector, int nsect, int nents, int tag, void *callback, void *data, int dir) { @@ -2447,6 +2448,7 @@ static void mtip_hw_submit_io(struct driver_data *dd, sector_t start, struct mtip_port *port = dd->port; struct mtip_cmd *command = &port->commands[tag]; int dma_dir = (dir == READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + u64 start = sector; /* Map the scatter list for DMA access */ nents = dma_map_sg(&dd->pdev->dev, command->sg, nents, dma_dir); @@ -2465,8 +2467,12 @@ static void mtip_hw_submit_io(struct driver_data *dd, sector_t start, fis->opts = 1 << 7; fis->command = (dir == READ ? ATA_CMD_FPDMA_READ : ATA_CMD_FPDMA_WRITE); - *((unsigned int *) &fis->lba_low) = (start & 0xFFFFFF); - *((unsigned int *) &fis->lba_low_ex) = ((start >> 24) & 0xFFFFFF); + fis->lba_low = start & 0xFF; + fis->lba_mid = (start >> 8) & 0xFF; + fis->lba_hi = (start >> 16) & 0xFF; + fis->lba_low_ex = (start >> 24) & 0xFF; + fis->lba_mid_ex = (start >> 32) & 0xFF; + fis->lba_hi_ex = (start >> 40) & 0xFF; fis->device = 1 << 6; fis->features = nsect & 0xFF; fis->features_ex = (nsect >> 8) & 0xFF; diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index 5f4a917bd8bb..b1742640556a 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -34,7 +34,7 @@ #define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48 /* check for erase mode support during secure erase */ -#define MTIP_SEC_ERASE_MODE 0x3 +#define MTIP_SEC_ERASE_MODE 0x2 /* # of times to retry timed out/failed IOs */ #define MTIP_MAX_RETRIES 2 @@ -155,14 +155,14 @@ enum { MTIP_DDF_REBUILD_FAILED_BIT = 8, }; -__packed struct smart_attr{ +struct smart_attr { u8 attr_id; u16 flags; u8 cur; u8 worst; u32 data; u8 res[3]; -}; +} __packed; /* Register Frame Information Structure (FIS), host to device. */ struct host_to_dev_fis { diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 71a25b91de00..d35a34c58369 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -19,6 +19,7 @@ endif obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o +obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o # Chip specific obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o diff --git a/drivers/clk/clk-bcm2835.c b/drivers/clk/clk-bcm2835.c index 67ad16b20b81..59e0fd8016bf 100644 --- a/drivers/clk/clk-bcm2835.c +++ b/drivers/clk/clk-bcm2835.c @@ -55,5 +55,5 @@ void __init bcm2835_init_clocks(void) pr_err("uart1_pclk not registered\n"); ret = clk_register_clkdev(clk, NULL, "20215000.uart"); if (ret) - pr_err("uart0_pclk alias not registered\n"); + pr_err("uart1_pclk alias not registered\n"); } diff --git a/drivers/clk/clk-zynq.c b/drivers/clk/clk-zynq.c new file mode 100644 index 000000000000..37a30514fd66 --- /dev/null +++ b/drivers/clk/clk-zynq.c @@ -0,0 +1,383 @@ +/* + * Copyright (c) 2012 National Instruments + * + * Josh Cartwright <josh.cartwright@ni.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/io.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/clk-provider.h> + +static void __iomem *slcr_base; + +struct zynq_pll_clk { + struct clk_hw hw; + void __iomem *pll_ctrl; + void __iomem *pll_cfg; +}; + +#define to_zynq_pll_clk(hw) container_of(hw, struct zynq_pll_clk, hw) + +#define CTRL_PLL_FDIV(x) ((x) >> 12) + +static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynq_pll_clk *pll = to_zynq_pll_clk(hw); + return parent_rate * CTRL_PLL_FDIV(ioread32(pll->pll_ctrl)); +} + +static const struct clk_ops zynq_pll_clk_ops = { + .recalc_rate = zynq_pll_recalc_rate, +}; + +static void __init zynq_pll_clk_setup(struct device_node *np) +{ + struct clk_init_data init; + struct zynq_pll_clk *pll; + const char *parent_name; + struct clk *clk; + u32 regs[2]; + int ret; + + ret = of_property_read_u32_array(np, "reg", regs, ARRAY_SIZE(regs)); + if (WARN_ON(ret)) + return; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (WARN_ON(!pll)) + return; + + pll->pll_ctrl = slcr_base + regs[0]; + pll->pll_cfg = slcr_base + regs[1]; + + of_property_read_string(np, "clock-output-names", &init.name); + + init.ops = &zynq_pll_clk_ops; + parent_name = of_clk_get_parent_name(np, 0); + init.parent_names = &parent_name; + init.num_parents = 1; + + pll->hw.init = &init; + + clk = clk_register(NULL, &pll->hw); + if (WARN_ON(IS_ERR(clk))) + return; + + ret = of_clk_add_provider(np, of_clk_src_simple_get, clk); + if (WARN_ON(ret)) + return; +} + +struct zynq_periph_clk { + struct clk_hw hw; + struct clk_onecell_data onecell_data; + struct clk *gates[2]; + void __iomem *clk_ctrl; + spinlock_t clkact_lock; +}; + +#define to_zynq_periph_clk(hw) container_of(hw, struct zynq_periph_clk, hw) + +static const u8 periph_clk_parent_map[] = { + 0, 0, 1, 2 +}; +#define PERIPH_CLK_CTRL_SRC(x) (periph_clk_parent_map[((x) & 0x30) >> 4]) +#define PERIPH_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8) + +static unsigned long zynq_periph_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynq_periph_clk *periph = to_zynq_periph_clk(hw); + return parent_rate / PERIPH_CLK_CTRL_DIV(ioread32(periph->clk_ctrl)); +} + +static u8 zynq_periph_get_parent(struct clk_hw *hw) +{ + struct zynq_periph_clk *periph = to_zynq_periph_clk(hw); + return PERIPH_CLK_CTRL_SRC(ioread32(periph->clk_ctrl)); +} + +static const struct clk_ops zynq_periph_clk_ops = { + .recalc_rate = zynq_periph_recalc_rate, + .get_parent = zynq_periph_get_parent, +}; + +static void __init zynq_periph_clk_setup(struct device_node *np) +{ + struct zynq_periph_clk *periph; + const char *parent_names[3]; + struct clk_init_data init; + int clk_num = 0, err; + const char *name; + struct clk *clk; + u32 reg; + int i; + + err = of_property_read_u32(np, "reg", ®); + if (WARN_ON(err)) + return; + + periph = kzalloc(sizeof(*periph), GFP_KERNEL); + if (WARN_ON(!periph)) + return; + + periph->clk_ctrl = slcr_base + reg; + spin_lock_init(&periph->clkact_lock); + + init.name = np->name; + init.ops = &zynq_periph_clk_ops; + for (i = 0; i < ARRAY_SIZE(parent_names); i++) + parent_names[i] = of_clk_get_parent_name(np, i); + init.parent_names = parent_names; + init.num_parents = ARRAY_SIZE(parent_names); + + periph->hw.init = &init; + + clk = clk_register(NULL, &periph->hw); + if (WARN_ON(IS_ERR(clk))) + return; + + err = of_clk_add_provider(np, of_clk_src_simple_get, clk); + if (WARN_ON(err)) + return; + + err = of_property_read_string_index(np, "clock-output-names", 0, + &name); + if (WARN_ON(err)) + return; + + periph->gates[0] = clk_register_gate(NULL, name, np->name, 0, + periph->clk_ctrl, 0, 0, + &periph->clkact_lock); + if (WARN_ON(IS_ERR(periph->gates[0]))) + return; + clk_num++; + + /* some periph clks have 2 downstream gates */ + err = of_property_read_string_index(np, "clock-output-names", 1, + &name); + if (err != -ENODATA) { + periph->gates[1] = clk_register_gate(NULL, name, np->name, 0, + periph->clk_ctrl, 1, 0, + &periph->clkact_lock); + if (WARN_ON(IS_ERR(periph->gates[1]))) + return; + clk_num++; + } + + periph->onecell_data.clks = periph->gates; + periph->onecell_data.clk_num = clk_num; + + err = of_clk_add_provider(np, of_clk_src_onecell_get, + &periph->onecell_data); + if (WARN_ON(err)) + return; +} + +/* CPU Clock domain is modelled as a mux with 4 children subclks, whose + * derivative rates depend on CLK_621_TRUE + */ + +struct zynq_cpu_clk { + struct clk_hw hw; + struct clk_onecell_data onecell_data; + struct clk *subclks[4]; + void __iomem *clk_ctrl; + spinlock_t clkact_lock; +}; + +#define to_zynq_cpu_clk(hw) container_of(hw, struct zynq_cpu_clk, hw) + +static const u8 zynq_cpu_clk_parent_map[] = { + 1, 1, 2, 0 +}; +#define CPU_CLK_SRCSEL(x) (zynq_cpu_clk_parent_map[(((x) & 0x30) >> 4)]) +#define CPU_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8) + +static u8 zynq_cpu_clk_get_parent(struct clk_hw *hw) +{ + struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw); + return CPU_CLK_SRCSEL(ioread32(cpuclk->clk_ctrl)); +} + +static unsigned long zynq_cpu_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw); + return parent_rate / CPU_CLK_CTRL_DIV(ioread32(cpuclk->clk_ctrl)); +} + +static const struct clk_ops zynq_cpu_clk_ops = { + .get_parent = zynq_cpu_clk_get_parent, + .recalc_rate = zynq_cpu_clk_recalc_rate, +}; + +struct zynq_cpu_subclk { + struct clk_hw hw; + void __iomem *clk_621; + enum { + CPU_SUBCLK_6X4X, + CPU_SUBCLK_3X2X, + CPU_SUBCLK_2X, + CPU_SUBCLK_1X, + } which; +}; + +#define CLK_621_TRUE(x) ((x) & 1) + +#define to_zynq_cpu_subclk(hw) container_of(hw, struct zynq_cpu_subclk, hw); + +static unsigned long zynq_cpu_subclk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long uninitialized_var(rate); + struct zynq_cpu_subclk *subclk; + bool is_621; + + subclk = to_zynq_cpu_subclk(hw) + is_621 = CLK_621_TRUE(ioread32(subclk->clk_621)); + + switch (subclk->which) { + case CPU_SUBCLK_6X4X: + rate = parent_rate; + break; + case CPU_SUBCLK_3X2X: + rate = parent_rate / 2; + break; + case CPU_SUBCLK_2X: + rate = parent_rate / (is_621 ? 3 : 2); + break; + case CPU_SUBCLK_1X: + rate = parent_rate / (is_621 ? 6 : 4); + break; + }; + + return rate; +} + +static const struct clk_ops zynq_cpu_subclk_ops = { + .recalc_rate = zynq_cpu_subclk_recalc_rate, +}; + +static struct clk *zynq_cpu_subclk_setup(struct device_node *np, u8 which, + void __iomem *clk_621) +{ + struct zynq_cpu_subclk *subclk; + struct clk_init_data init; + struct clk *clk; + int err; + + err = of_property_read_string_index(np, "clock-output-names", + which, &init.name); + if (WARN_ON(err)) + goto err_read_output_name; + + subclk = kzalloc(sizeof(*subclk), GFP_KERNEL); + if (!subclk) + goto err_subclk_alloc; + + subclk->clk_621 = clk_621; + subclk->which = which; + + init.ops = &zynq_cpu_subclk_ops; + init.parent_names = &np->name; + init.num_parents = 1; + + subclk->hw.init = &init; + + clk = clk_register(NULL, &subclk->hw); + if (WARN_ON(IS_ERR(clk))) + goto err_clk_register; + + return clk; + +err_clk_register: + kfree(subclk); +err_subclk_alloc: +err_read_output_name: + return ERR_PTR(-EINVAL); +} + +static void __init zynq_cpu_clk_setup(struct device_node *np) +{ + struct zynq_cpu_clk *cpuclk; + const char *parent_names[3]; + struct clk_init_data init; + void __iomem *clk_621; + struct clk *clk; + u32 reg[2]; + int err; + int i; + + err = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg)); + if (WARN_ON(err)) + return; + + cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL); + if (WARN_ON(!cpuclk)) + return; + + cpuclk->clk_ctrl = slcr_base + reg[0]; + clk_621 = slcr_base + reg[1]; + spin_lock_init(&cpuclk->clkact_lock); + + init.name = np->name; + init.ops = &zynq_cpu_clk_ops; + for (i = 0; i < ARRAY_SIZE(parent_names); i++) + parent_names[i] = of_clk_get_parent_name(np, i); + init.parent_names = parent_names; + init.num_parents = ARRAY_SIZE(parent_names); + + cpuclk->hw.init = &init; + + clk = clk_register(NULL, &cpuclk->hw); + if (WARN_ON(IS_ERR(clk))) + return; + + err = of_clk_add_provider(np, of_clk_src_simple_get, clk); + if (WARN_ON(err)) + return; + + for (i = 0; i < 4; i++) { + cpuclk->subclks[i] = zynq_cpu_subclk_setup(np, i, clk_621); + if (WARN_ON(IS_ERR(cpuclk->subclks[i]))) + return; + } + + cpuclk->onecell_data.clks = cpuclk->subclks; + cpuclk->onecell_data.clk_num = i; + + err = of_clk_add_provider(np, of_clk_src_onecell_get, + &cpuclk->onecell_data); + if (WARN_ON(err)) + return; +} + +static const __initconst struct of_device_id zynq_clk_match[] = { + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, + { .compatible = "xlnx,zynq-pll", .data = zynq_pll_clk_setup, }, + { .compatible = "xlnx,zynq-periph-clock", + .data = zynq_periph_clk_setup, }, + { .compatible = "xlnx,zynq-cpu-clock", .data = zynq_cpu_clk_setup, }, + {} +}; + +void __init xilinx_zynq_clocks_init(void __iomem *slcr) +{ + slcr_base = slcr; + of_clk_init(zynq_clk_match); +} diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c index 649a146e1382..e66e8ee5a9af 100644 --- a/drivers/crypto/omap-aes.c +++ b/drivers/crypto/omap-aes.c @@ -29,7 +29,7 @@ #include <crypto/scatterwalk.h> #include <crypto/aes.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> /* OMAP TRM gives bitfields as start:end, where start is the higher bit number. For example 7:0 */ diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c index d76fe06b9417..1d75e6f95a58 100644 --- a/drivers/crypto/omap-sham.c +++ b/drivers/crypto/omap-sham.c @@ -37,7 +37,7 @@ #include <crypto/hash.h> #include <crypto/internal/hash.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <mach/irqs.h> #define SHA_REG_DIGEST(x) (0x00 + ((x) * 0x04)) diff --git a/drivers/crypto/tegra-aes.c b/drivers/crypto/tegra-aes.c index 37185e6630cd..e69f3bc473be 100644 --- a/drivers/crypto/tegra-aes.c +++ b/drivers/crypto/tegra-aes.c @@ -41,8 +41,6 @@ #include <linux/completion.h> #include <linux/workqueue.h> -#include <mach/clk.h> - #include <crypto/scatterwalk.h> #include <crypto/aes.h> #include <crypto/internal/rng.h> diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index 7d9554cc4976..dbf0e6f8de8a 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -29,7 +29,6 @@ #include <asm/irq.h> #include <linux/platform_data/dma-imx.h> -#include <mach/hardware.h> #include "dmaengine.h" #define IMXDMA_MAX_CHAN_DESCRIPTORS 16 @@ -167,6 +166,12 @@ struct imxdma_channel { int slot_2d; }; +enum imx_dma_type { + IMX1_DMA, + IMX21_DMA, + IMX27_DMA, +}; + struct imxdma_engine { struct device *dev; struct device_dma_parameters dma_parms; @@ -177,7 +182,39 @@ struct imxdma_engine { spinlock_t lock; struct imx_dma_2d_config slots_2d[IMX_DMA_2D_SLOTS]; struct imxdma_channel channel[IMX_DMA_CHANNELS]; + enum imx_dma_type devtype; +}; + +static struct platform_device_id imx_dma_devtype[] = { + { + .name = "imx1-dma", + .driver_data = IMX1_DMA, + }, { + .name = "imx21-dma", + .driver_data = IMX21_DMA, + }, { + .name = "imx27-dma", + .driver_data = IMX27_DMA, + }, { + /* sentinel */ + } }; +MODULE_DEVICE_TABLE(platform, imx_dma_devtype); + +static inline int is_imx1_dma(struct imxdma_engine *imxdma) +{ + return imxdma->devtype == IMX1_DMA; +} + +static inline int is_imx21_dma(struct imxdma_engine *imxdma) +{ + return imxdma->devtype == IMX21_DMA; +} + +static inline int is_imx27_dma(struct imxdma_engine *imxdma) +{ + return imxdma->devtype == IMX27_DMA; +} static struct imxdma_channel *to_imxdma_chan(struct dma_chan *chan) { @@ -212,7 +249,9 @@ static unsigned imx_dmav1_readl(struct imxdma_engine *imxdma, unsigned offset) static int imxdma_hw_chain(struct imxdma_channel *imxdmac) { - if (cpu_is_mx27()) + struct imxdma_engine *imxdma = imxdmac->imxdma; + + if (is_imx27_dma(imxdma)) return imxdmac->hw_chaining; else return 0; @@ -267,7 +306,7 @@ static void imxdma_enable_hw(struct imxdma_desc *d) imx_dmav1_writel(imxdma, imx_dmav1_readl(imxdma, DMA_CCR(channel)) | CCR_CEN | CCR_ACRPT, DMA_CCR(channel)); - if ((cpu_is_mx21() || cpu_is_mx27()) && + if (!is_imx1_dma(imxdma) && d->sg && imxdma_hw_chain(imxdmac)) { d->sg = sg_next(d->sg); if (d->sg) { @@ -436,7 +475,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) struct imxdma_engine *imxdma = dev_id; int i, disr; - if (cpu_is_mx21() || cpu_is_mx27()) + if (!is_imx1_dma(imxdma)) imxdma_err_handler(irq, dev_id); disr = imx_dmav1_readl(imxdma, DMA_DISR); @@ -961,35 +1000,32 @@ static void imxdma_issue_pending(struct dma_chan *chan) static int __init imxdma_probe(struct platform_device *pdev) { struct imxdma_engine *imxdma; + struct resource *res; int ret, i; + int irq, irq_err; - - imxdma = kzalloc(sizeof(*imxdma), GFP_KERNEL); + imxdma = devm_kzalloc(&pdev->dev, sizeof(*imxdma), GFP_KERNEL); if (!imxdma) return -ENOMEM; - if (cpu_is_mx1()) { - imxdma->base = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR); - } else if (cpu_is_mx21()) { - imxdma->base = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR); - } else if (cpu_is_mx27()) { - imxdma->base = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR); - } else { - kfree(imxdma); - return 0; - } + imxdma->devtype = pdev->id_entry->driver_data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + imxdma->base = devm_request_and_ioremap(&pdev->dev, res); + if (!imxdma->base) + return -EADDRNOTAVAIL; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; imxdma->dma_ipg = devm_clk_get(&pdev->dev, "ipg"); - if (IS_ERR(imxdma->dma_ipg)) { - ret = PTR_ERR(imxdma->dma_ipg); - goto err_clk; - } + if (IS_ERR(imxdma->dma_ipg)) + return PTR_ERR(imxdma->dma_ipg); imxdma->dma_ahb = devm_clk_get(&pdev->dev, "ahb"); - if (IS_ERR(imxdma->dma_ahb)) { - ret = PTR_ERR(imxdma->dma_ahb); - goto err_clk; - } + if (IS_ERR(imxdma->dma_ahb)) + return PTR_ERR(imxdma->dma_ahb); clk_prepare_enable(imxdma->dma_ipg); clk_prepare_enable(imxdma->dma_ahb); @@ -997,18 +1033,25 @@ static int __init imxdma_probe(struct platform_device *pdev) /* reset DMA module */ imx_dmav1_writel(imxdma, DCR_DRST, DMA_DCR); - if (cpu_is_mx1()) { - ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", imxdma); + if (is_imx1_dma(imxdma)) { + ret = devm_request_irq(&pdev->dev, irq, + dma_irq_handler, 0, "DMA", imxdma); if (ret) { dev_warn(imxdma->dev, "Can't register IRQ for DMA\n"); - goto err_enable; + goto err; + } + + irq_err = platform_get_irq(pdev, 1); + if (irq_err < 0) { + ret = irq_err; + goto err; } - ret = request_irq(MX1_DMA_ERR, imxdma_err_handler, 0, "DMA", imxdma); + ret = devm_request_irq(&pdev->dev, irq_err, + imxdma_err_handler, 0, "DMA", imxdma); if (ret) { dev_warn(imxdma->dev, "Can't register ERRIRQ for DMA\n"); - free_irq(MX1_DMA_INT, NULL); - goto err_enable; + goto err; } } @@ -1038,14 +1081,14 @@ static int __init imxdma_probe(struct platform_device *pdev) for (i = 0; i < IMX_DMA_CHANNELS; i++) { struct imxdma_channel *imxdmac = &imxdma->channel[i]; - if (cpu_is_mx21() || cpu_is_mx27()) { - ret = request_irq(MX2x_INT_DMACH0 + i, + if (!is_imx1_dma(imxdma)) { + ret = devm_request_irq(&pdev->dev, irq + i, dma_irq_handler, 0, "DMA", imxdma); if (ret) { dev_warn(imxdma->dev, "Can't register IRQ %d " "for DMA channel %d\n", - MX2x_INT_DMACH0 + i, i); - goto err_init; + irq + i, i); + goto err; } init_timer(&imxdmac->watchdog); imxdmac->watchdog.function = &imxdma_watchdog; @@ -1091,46 +1134,25 @@ static int __init imxdma_probe(struct platform_device *pdev) ret = dma_async_device_register(&imxdma->dma_device); if (ret) { dev_err(&pdev->dev, "unable to register\n"); - goto err_init; + goto err; } return 0; -err_init: - - if (cpu_is_mx21() || cpu_is_mx27()) { - while (--i >= 0) - free_irq(MX2x_INT_DMACH0 + i, NULL); - } else if cpu_is_mx1() { - free_irq(MX1_DMA_INT, NULL); - free_irq(MX1_DMA_ERR, NULL); - } -err_enable: +err: clk_disable_unprepare(imxdma->dma_ipg); clk_disable_unprepare(imxdma->dma_ahb); -err_clk: - kfree(imxdma); return ret; } static int __exit imxdma_remove(struct platform_device *pdev) { struct imxdma_engine *imxdma = platform_get_drvdata(pdev); - int i; dma_async_device_unregister(&imxdma->dma_device); - if (cpu_is_mx21() || cpu_is_mx27()) { - for (i = 0; i < IMX_DMA_CHANNELS; i++) - free_irq(MX2x_INT_DMACH0 + i, NULL); - } else if cpu_is_mx1() { - free_irq(MX1_DMA_INT, NULL); - free_irq(MX1_DMA_ERR, NULL); - } - clk_disable_unprepare(imxdma->dma_ipg); clk_disable_unprepare(imxdma->dma_ahb); - kfree(imxdma); return 0; } @@ -1139,6 +1161,7 @@ static struct platform_driver imxdma_driver = { .driver = { .name = "imx-dma", }, + .id_table = imx_dma_devtype, .remove = __exit_p(imxdma_remove), }; diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index c099ca0846f4..f082aa3a918c 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -40,7 +40,6 @@ #include <asm/irq.h> #include <linux/platform_data/dma-imx-sdma.h> #include <linux/platform_data/dma-imx.h> -#include <mach/hardware.h> #include "dmaengine.h" diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index c7573e50aa14..65855373cee6 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -22,8 +22,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/module.h> - -#include <mach/ipu.h> +#include <linux/dma/ipu-dma.h> #include "../dmaengine.h" #include "ipu_intern.h" diff --git a/drivers/dma/ipu/ipu_irq.c b/drivers/dma/ipu/ipu_irq.c index fa95bcc3de1f..a5ee37d5320f 100644 --- a/drivers/dma/ipu/ipu_irq.c +++ b/drivers/dma/ipu/ipu_irq.c @@ -15,8 +15,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/module.h> - -#include <mach/ipu.h> +#include <linux/dma/ipu-dma.h> #include "ipu_intern.h" diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c index 56d925312a5c..5a31264f2bd1 100644 --- a/drivers/dma/omap-dma.c +++ b/drivers/dma/omap-dma.c @@ -19,14 +19,6 @@ #include "virt-dma.h" -#include <plat-omap/dma-omap.h> - -#ifdef CONFIG_ARCH_OMAP2PLUS -#define dma_omap2plus() 1 -#else -#define dma_omap2plus() 0 -#endif - struct omap_dmadev { struct dma_device ddev; spinlock_t lock; diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index 8d4804732bac..8c4139647efc 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -33,7 +33,7 @@ * detection. The mods to Rev F required more family * information detection. * - * Changes/Fixes by Borislav Petkov <borislav.petkov@amd.com>: + * Changes/Fixes by Borislav Petkov <bp@alien8.de>: * - misc fixes and code cleanups * * This module is based on the following documents diff --git a/drivers/edac/edac_stub.c b/drivers/edac/edac_stub.c index 6c86f6e54558..351945fa2ecd 100644 --- a/drivers/edac/edac_stub.c +++ b/drivers/edac/edac_stub.c @@ -5,7 +5,7 @@ * * 2007 (c) MontaVista Software, Inc. * 2010 (c) Advanced Micro Devices Inc. - * Borislav Petkov <borislav.petkov@amd.com> + * Borislav Petkov <bp@alien8.de> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c index 66b5151c1080..2ae78f20cc28 100644 --- a/drivers/edac/mce_amd_inj.c +++ b/drivers/edac/mce_amd_inj.c @@ -6,7 +6,7 @@ * This file may be distributed under the terms of the GNU General Public * License version 2. * - * Copyright (c) 2010: Borislav Petkov <borislav.petkov@amd.com> + * Copyright (c) 2010: Borislav Petkov <bp@alien8.de> * Advanced Micro Devices Inc. */ @@ -168,6 +168,6 @@ module_init(edac_init_mce_inject); module_exit(edac_exit_mce_inject); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Borislav Petkov <borislav.petkov@amd.com>"); +MODULE_AUTHOR("Borislav Petkov <bp@alien8.de>"); MODULE_AUTHOR("AMD Inc."); MODULE_DESCRIPTION("MCE injection facility for testing MCE decoding"); diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 1162d6b3bf85..bb1b392f5cda 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -1546,6 +1546,8 @@ static int sbp2_scsi_slave_configure(struct scsi_device *sdev) struct sbp2_logical_unit *lu = sdev->hostdata; sdev->use_10_for_rw = 1; + sdev->no_report_opcodes = 1; + sdev->no_write_same = 1; if (sbp2_param_exclusive_login) sdev->manage_start_stop = 1; diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index f11d8e3b4041..e7dc7dd3e18d 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -152,7 +152,7 @@ config GPIO_MSM_V2 config GPIO_MVEBU def_bool y - depends on ARCH_MVEBU + depends on PLAT_ORION select GPIO_GENERIC select GENERIC_IRQ_CHIP @@ -466,7 +466,7 @@ config GPIO_ADP5588_IRQ config GPIO_ADNP tristate "Avionic Design N-bit GPIO expander" - depends on I2C && OF + depends on I2C && OF_GPIO help This option enables support for N GPIOs found on Avionic Design I2C GPIO expanders. The register space will be extended by powers diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c index 0f425189de11..ce1c84760076 100644 --- a/drivers/gpio/gpio-mcp23s08.c +++ b/drivers/gpio/gpio-mcp23s08.c @@ -77,7 +77,7 @@ struct mcp23s08_driver_data { /*----------------------------------------------------------------------*/ -#ifdef CONFIG_I2C +#if IS_ENABLED(CONFIG_I2C) static int mcp23008_read(struct mcp23s08 *mcp, unsigned reg) { @@ -399,7 +399,7 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, break; #endif /* CONFIG_SPI_MASTER */ -#ifdef CONFIG_I2C +#if IS_ENABLED(CONFIG_I2C) case MCP_TYPE_008: mcp->ops = &mcp23008_ops; mcp->chip.ngpio = 8; @@ -473,7 +473,7 @@ fail: /*----------------------------------------------------------------------*/ -#ifdef CONFIG_I2C +#if IS_ENABLED(CONFIG_I2C) static int __devinit mcp230xx_probe(struct i2c_client *client, const struct i2c_device_id *id) diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index cf7afb9eb61a..be65c0451ad5 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -92,6 +92,11 @@ static inline void __iomem *mvebu_gpioreg_out(struct mvebu_gpio_chip *mvchip) return mvchip->membase + GPIO_OUT_OFF; } +static inline void __iomem *mvebu_gpioreg_blink(struct mvebu_gpio_chip *mvchip) +{ + return mvchip->membase + GPIO_BLINK_EN_OFF; +} + static inline void __iomem *mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip) { return mvchip->membase + GPIO_IO_CONF_OFF; @@ -206,6 +211,23 @@ static int mvebu_gpio_get(struct gpio_chip *chip, unsigned pin) return (u >> pin) & 1; } +static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value) +{ + struct mvebu_gpio_chip *mvchip = + container_of(chip, struct mvebu_gpio_chip, chip); + unsigned long flags; + u32 u; + + spin_lock_irqsave(&mvchip->lock, flags); + u = readl_relaxed(mvebu_gpioreg_blink(mvchip)); + if (value) + u |= 1 << pin; + else + u &= ~(1 << pin); + writel_relaxed(u, mvebu_gpioreg_blink(mvchip)); + spin_unlock_irqrestore(&mvchip->lock, flags); +} + static int mvebu_gpio_direction_input(struct gpio_chip *chip, unsigned pin) { struct mvebu_gpio_chip *mvchip = @@ -244,6 +266,7 @@ static int mvebu_gpio_direction_output(struct gpio_chip *chip, unsigned pin, if (ret) return ret; + mvebu_gpio_blink(chip, pin, 0); mvebu_gpio_set(chip, pin, value); spin_lock_irqsave(&mvchip->lock, flags); diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index 98d52cb3fd1a..6ab8afbc4697 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -448,7 +448,7 @@ static int pxa_gpio_nums(void) } else if (cpu_is_pxa27x()) { count = 120; gpio_type = PXA27X_GPIO; - } else if (cpu_is_pxa93x() || cpu_is_pxa95x()) { + } else if (cpu_is_pxa93x()) { count = 191; gpio_type = PXA93X_GPIO; } else if (cpu_is_pxa3xx()) { diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index a006f0db15af..88f41e51565b 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -2797,27 +2797,6 @@ static __init void exynos4_gpiolib_init(void) int group = 0; void __iomem *gpx_base; -#ifdef CONFIG_PINCTRL_SAMSUNG - /* - * This gpio driver includes support for device tree support and - * there are platforms using it. In order to maintain - * compatibility with those platforms, and to allow non-dt - * Exynos4210 platforms to use this gpiolib support, a check - * is added to find out if there is a active pin-controller - * driver support available. If it is available, this gpiolib - * support is ignored and the gpiolib support available in - * pin-controller driver is used. This is a temporary check and - * will go away when all of the Exynos4210 platforms have - * switched to using device tree and the pin-ctrl driver. - */ - struct device_node *pctrl_np; - const char *pctrl_compat = "samsung,pinctrl-exynos4210"; - pctrl_np = of_find_compatible_node(NULL, NULL, pctrl_compat); - if (pctrl_np) - if (of_device_is_available(pctrl_np)) - return; -#endif - /* gpio part1 */ gpio_base1 = ioremap(EXYNOS4_PA_GPIO1, SZ_4K); if (gpio_base1 == NULL) { @@ -3032,6 +3011,28 @@ static __init int samsung_gpiolib_init(void) int i, nr_chips; int group = 0; +#ifdef CONFIG_PINCTRL_SAMSUNG + /* + * This gpio driver includes support for device tree support and there + * are platforms using it. In order to maintain compatibility with those + * platforms, and to allow non-dt Exynos4210 platforms to use this + * gpiolib support, a check is added to find out if there is a active + * pin-controller driver support available. If it is available, this + * gpiolib support is ignored and the gpiolib support available in + * pin-controller driver is used. This is a temporary check and will go + * away when all of the Exynos4210 platforms have switched to using + * device tree and the pin-ctrl driver. + */ + struct device_node *pctrl_np; + static const struct of_device_id exynos_pinctrl_ids[] = { + { .compatible = "samsung,pinctrl-exynos4210", }, + { .compatible = "samsung,pinctrl-exynos4x12", }, + }; + for_each_matching_node(pctrl_np, exynos_pinctrl_ids) + if (pctrl_np && of_device_is_available(pctrl_np)) + return -ENODEV; +#endif + samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs)); if (soc_is_s3c24xx()) { diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c index 05a909a17cee..15b182c84ce8 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c @@ -49,13 +49,7 @@ nv50_disp_intr_vblank(struct nv50_disp_priv *priv, int crtc) if (chan->vblank.crtc != crtc) continue; - if (nv_device(priv)->chipset == 0x50) { - nv_wr32(priv, 0x001704, chan->vblank.channel); - nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma); - bar->flush(bar); - nv_wr32(priv, 0x001570, chan->vblank.offset); - nv_wr32(priv, 0x001574, chan->vblank.value); - } else { + if (nv_device(priv)->chipset >= 0xc0) { nv_wr32(priv, 0x001718, 0x80000000 | chan->vblank.channel); bar->flush(bar); nv_wr32(priv, 0x06000c, @@ -63,6 +57,17 @@ nv50_disp_intr_vblank(struct nv50_disp_priv *priv, int crtc) nv_wr32(priv, 0x060010, lower_32_bits(chan->vblank.offset)); nv_wr32(priv, 0x060014, chan->vblank.value); + } else { + nv_wr32(priv, 0x001704, chan->vblank.channel); + nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma); + bar->flush(bar); + if (nv_device(priv)->chipset == 0x50) { + nv_wr32(priv, 0x001570, chan->vblank.offset); + nv_wr32(priv, 0x001574, chan->vblank.value); + } else { + nv_wr32(priv, 0x060010, chan->vblank.offset); + nv_wr32(priv, 0x060014, chan->vblank.value); + } } list_del(&chan->vblank.head); diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c b/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c index e45035efb8ca..7bbb1e1b7a8d 100644 --- a/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c +++ b/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c @@ -669,21 +669,27 @@ nv40_grctx_fill(struct nouveau_device *device, struct nouveau_gpuobj *mem) }); } -void +int nv40_grctx_init(struct nouveau_device *device, u32 *size) { - u32 ctxprog[256], i; + u32 *ctxprog = kmalloc(256 * 4, GFP_KERNEL), i; struct nouveau_grctx ctx = { .device = device, .mode = NOUVEAU_GRCTX_PROG, .data = ctxprog, - .ctxprog_max = ARRAY_SIZE(ctxprog) + .ctxprog_max = 256, }; + if (!ctxprog) + return -ENOMEM; + nv40_grctx_generate(&ctx); nv_wr32(device, 0x400324, 0); for (i = 0; i < ctx.ctxprog_len; i++) nv_wr32(device, 0x400328, ctxprog[i]); *size = ctx.ctxvals_pos * 4; + + kfree(ctxprog); + return 0; } diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c index 425001204a89..cc6574eeb80e 100644 --- a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c +++ b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c @@ -346,7 +346,9 @@ nv40_graph_init(struct nouveau_object *object) return ret; /* generate and upload context program */ - nv40_grctx_init(nv_device(priv), &priv->size); + ret = nv40_grctx_init(nv_device(priv), &priv->size); + if (ret) + return ret; /* No context present currently */ nv_wr32(priv, NV40_PGRAPH_CTXCTL_CUR, 0x00000000); diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h index d2ac975afc2e..7da35a4e7970 100644 --- a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h +++ b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h @@ -15,7 +15,7 @@ nv44_graph_class(void *priv) return !(0x0baf & (1 << (device->chipset & 0x0f))); } -void nv40_grctx_init(struct nouveau_device *, u32 *size); +int nv40_grctx_init(struct nouveau_device *, u32 *size); void nv40_grctx_fill(struct nouveau_device *, struct nouveau_gpuobj *); #endif diff --git a/drivers/gpu/drm/nouveau/core/include/core/object.h b/drivers/gpu/drm/nouveau/core/include/core/object.h index 818feabbf4a0..486f1a9217fd 100644 --- a/drivers/gpu/drm/nouveau/core/include/core/object.h +++ b/drivers/gpu/drm/nouveau/core/include/core/object.h @@ -175,14 +175,18 @@ nv_mo32(void *obj, u32 addr, u32 mask, u32 data) return temp; } -static inline bool -nv_strncmp(void *obj, u32 addr, u32 len, const char *str) +static inline int +nv_memcmp(void *obj, u32 addr, const char *str, u32 len) { + unsigned char c1, c2; + while (len--) { - if (nv_ro08(obj, addr++) != *(str++)) - return false; + c1 = nv_ro08(obj, addr++); + c2 = *(str++); + if (c1 != c2) + return c1 - c2; } - return true; + return 0; } #endif diff --git a/drivers/gpu/drm/nouveau/core/include/subdev/clock.h b/drivers/gpu/drm/nouveau/core/include/subdev/clock.h index 39e73b91d360..41b7a6a76f19 100644 --- a/drivers/gpu/drm/nouveau/core/include/subdev/clock.h +++ b/drivers/gpu/drm/nouveau/core/include/subdev/clock.h @@ -54,6 +54,7 @@ int nv04_clock_pll_calc(struct nouveau_clock *, struct nvbios_pll *, int clk, struct nouveau_pll_vals *); int nv04_clock_pll_prog(struct nouveau_clock *, u32 reg1, struct nouveau_pll_vals *); - +int nva3_clock_pll_calc(struct nouveau_clock *, struct nvbios_pll *, + int clk, struct nouveau_pll_vals *); #endif diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c b/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c index 7d750382a833..c51197157749 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c @@ -64,7 +64,7 @@ dcb_table(struct nouveau_bios *bios, u8 *ver, u8 *hdr, u8 *cnt, u8 *len) } } else if (*ver >= 0x15) { - if (!nv_strncmp(bios, dcb - 7, 7, "DEV_REC")) { + if (!nv_memcmp(bios, dcb - 7, "DEV_REC", 7)) { u16 i2c = nv_ro16(bios, dcb + 2); *hdr = 4; *cnt = (i2c - dcb) / 10; diff --git a/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c b/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c index cc8d7d162d7c..9068c98b96f6 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c +++ b/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c @@ -66,6 +66,24 @@ nva3_clock_pll_set(struct nouveau_clock *clk, u32 type, u32 freq) return ret; } +int +nva3_clock_pll_calc(struct nouveau_clock *clock, struct nvbios_pll *info, + int clk, struct nouveau_pll_vals *pv) +{ + int ret, N, M, P; + + ret = nva3_pll_calc(clock, info, clk, &N, NULL, &M, &P); + + if (ret > 0) { + pv->refclk = info->refclk; + pv->N1 = N; + pv->M1 = M; + pv->log2P = P; + } + return ret; +} + + static int nva3_clock_ctor(struct nouveau_object *parent, struct nouveau_object *engine, struct nouveau_oclass *oclass, void *data, u32 size, @@ -80,6 +98,7 @@ nva3_clock_ctor(struct nouveau_object *parent, struct nouveau_object *engine, return ret; priv->base.pll_set = nva3_clock_pll_set; + priv->base.pll_calc = nva3_clock_pll_calc; return 0; } diff --git a/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c index 5ccce0b17bf3..f6962c9b6c36 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c @@ -79,6 +79,7 @@ nvc0_clock_ctor(struct nouveau_object *parent, struct nouveau_object *engine, return ret; priv->base.pll_set = nvc0_clock_pll_set; + priv->base.pll_calc = nva3_clock_pll_calc; return 0; } diff --git a/drivers/gpu/drm/nouveau/nouveau_abi16.c b/drivers/gpu/drm/nouveau/nouveau_abi16.c index cc79c796afee..cbf1fc60a386 100644 --- a/drivers/gpu/drm/nouveau/nouveau_abi16.c +++ b/drivers/gpu/drm/nouveau/nouveau_abi16.c @@ -241,6 +241,10 @@ nouveau_abi16_ioctl_channel_alloc(ABI16_IOCTL_ARGS) if (unlikely(!abi16)) return -ENOMEM; + + if (!drm->channel) + return nouveau_abi16_put(abi16, -ENODEV); + client = nv_client(abi16->client); if (init->fb_ctxdma_handle == ~0 || init->tt_ctxdma_handle == ~0) diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 0910125cbbc3..8503b2ea570a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -129,7 +129,8 @@ nouveau_accel_init(struct nouveau_drm *drm) /* initialise synchronisation routines */ if (device->card_type < NV_10) ret = nv04_fence_create(drm); - else if (device->chipset < 0x84) ret = nv10_fence_create(drm); + else if (device->card_type < NV_50) ret = nv10_fence_create(drm); + else if (device->chipset < 0x84) ret = nv50_fence_create(drm); else if (device->card_type < NV_C0) ret = nv84_fence_create(drm); else ret = nvc0_fence_create(drm); if (ret) { diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index af31f829f4a8..219942c660d7 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -1330,6 +1330,8 @@ void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *sav break; udelay(1); } + } else { + save->crtc_enabled[i] = false; } } diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c index 10ea17a6b2a6..42433344cb1b 100644 --- a/drivers/gpu/drm/radeon/radeon_agp.c +++ b/drivers/gpu/drm/radeon/radeon_agp.c @@ -69,9 +69,12 @@ static struct radeon_agpmode_quirk radeon_agpmode_quirk_list[] = { /* Intel 82830 830 Chipset Host Bridge / Mobility M6 LY Needs AGPMode 2 (fdo #17360)*/ { PCI_VENDOR_ID_INTEL, 0x3575, PCI_VENDOR_ID_ATI, 0x4c59, PCI_VENDOR_ID_DELL, 0x00e3, 2}, - /* Intel 82852/82855 host bridge / Mobility FireGL 9000 R250 Needs AGPMode 1 (lp #296617) */ + /* Intel 82852/82855 host bridge / Mobility FireGL 9000 RV250 Needs AGPMode 1 (lp #296617) */ { PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4c66, PCI_VENDOR_ID_DELL, 0x0149, 1}, + /* Intel 82855PM host bridge / Mobility FireGL 9000 RV250 Needs AGPMode 1 for suspend/resume */ + { PCI_VENDOR_ID_INTEL, 0x3340, PCI_VENDOR_ID_ATI, 0x4c66, + PCI_VENDOR_ID_IBM, 0x0531, 1}, /* Intel 82852/82855 host bridge / Mobility 9600 M10 RV350 Needs AGPMode 1 (deb #467460) */ { PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4e50, 0x1025, 0x0061, 1}, diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index aa59a254be2c..c02bf208084f 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -39,6 +39,7 @@ #define AT91_TWI_STOP 0x0002 /* Send a Stop Condition */ #define AT91_TWI_MSEN 0x0004 /* Master Transfer Enable */ #define AT91_TWI_SVDIS 0x0020 /* Slave Transfer Disable */ +#define AT91_TWI_QUICK 0x0040 /* SMBus quick command */ #define AT91_TWI_SWRST 0x0080 /* Software Reset */ #define AT91_TWI_MMR 0x0004 /* Master Mode Register */ @@ -212,7 +213,11 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) INIT_COMPLETION(dev->cmd_complete); dev->transfer_status = 0; - if (dev->msg->flags & I2C_M_RD) { + + if (!dev->buf_len) { + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK); + at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP); + } else if (dev->msg->flags & I2C_M_RD) { unsigned start_flags = AT91_TWI_START; if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) { diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 2ef162d148cb..b9734747d610 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -52,8 +52,6 @@ #include <linux/of_device.h> #include <linux/of_i2c.h> #include <linux/pinctrl/consumer.h> - -#include <mach/hardware.h> #include <linux/platform_data/i2c-imx.h> /** Defines ******************************************************************** @@ -115,6 +113,11 @@ static u16 __initdata i2c_clk_div[50][2] = { { 3072, 0x1E }, { 3840, 0x1F } }; +enum imx_i2c_type { + IMX1_I2C, + IMX21_I2C, +}; + struct imx_i2c_struct { struct i2c_adapter adapter; struct clk *clk; @@ -124,13 +127,33 @@ struct imx_i2c_struct { unsigned int disable_delay; int stopped; unsigned int ifdr; /* IMX_I2C_IFDR */ + enum imx_i2c_type devtype; +}; + +static struct platform_device_id imx_i2c_devtype[] = { + { + .name = "imx1-i2c", + .driver_data = IMX1_I2C, + }, { + .name = "imx21-i2c", + .driver_data = IMX21_I2C, + }, { + /* sentinel */ + } }; +MODULE_DEVICE_TABLE(platform, imx_i2c_devtype); static const struct of_device_id i2c_imx_dt_ids[] = { - { .compatible = "fsl,imx1-i2c", }, + { .compatible = "fsl,imx1-i2c", .data = &imx_i2c_devtype[IMX1_I2C], }, + { .compatible = "fsl,imx21-i2c", .data = &imx_i2c_devtype[IMX21_I2C], }, { /* sentinel */ } }; +static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx) +{ + return i2c_imx->devtype == IMX1_I2C; +} + /** Functions for IMX I2C adapter driver *************************************** *******************************************************************************/ @@ -223,7 +246,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) temp &= ~(I2CR_MSTA | I2CR_MTX); writeb(temp, i2c_imx->base + IMX_I2C_I2CR); } - if (cpu_is_mx1()) { + if (is_imx1_i2c(i2c_imx)) { /* * This delay caused by an i.MXL hardware bug. * If no (or too short) delay, no "STOP" bit will be generated. @@ -465,6 +488,8 @@ static struct i2c_algorithm i2c_imx_algo = { static int __init i2c_imx_probe(struct platform_device *pdev) { + const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids, + &pdev->dev); struct imx_i2c_struct *i2c_imx; struct resource *res; struct imxi2c_platform_data *pdata = pdev->dev.platform_data; @@ -497,6 +522,10 @@ static int __init i2c_imx_probe(struct platform_device *pdev) return -ENOMEM; } + if (of_id) + pdev->id_entry = of_id->data; + i2c_imx->devtype = pdev->id_entry->driver_data; + /* Setup i2c_imx driver structure */ strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name)); i2c_imx->adapter.owner = THIS_MODULE; @@ -593,7 +622,8 @@ static struct platform_driver i2c_imx_driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, .of_match_table = i2c_imx_dt_ids, - } + }, + .id_table = imx_i2c_devtype, }; static int __init i2c_adap_imx_init(void) diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 286ca1917820..0670da79ee5e 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -287,12 +287,14 @@ read_init_dma_fail: select_init_dma_fail: dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE); select_init_pio_fail: + dmaengine_terminate_all(i2c->dmach); return -EINVAL; /* Write failpath. */ write_init_dma_fail: dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE); write_init_pio_fail: + dmaengine_terminate_all(i2c->dmach); return -EINVAL; } diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index db31eaed6ea5..3525c9e62cb0 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -43,7 +43,6 @@ #include <linux/slab.h> #include <linux/i2c-omap.h> #include <linux/pm_runtime.h> -#include <linux/pm_qos.h> /* I2C controller revisions */ #define OMAP_I2C_OMAP1_REV_2 0x20 @@ -187,8 +186,9 @@ struct omap_i2c_dev { int reg_shift; /* bit shift for I2C register addresses */ struct completion cmd_complete; struct resource *ioarea; - u32 latency; /* maximum MPU wkup latency */ - struct pm_qos_request pm_qos_request; + u32 latency; /* maximum mpu wkup latency */ + void (*set_mpu_wkup_lat)(struct device *dev, + long latency); u32 speed; /* Speed of bus in kHz */ u32 dtrev; /* extra revision from DT */ u32 flags; @@ -494,7 +494,9 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *dev, u8 size, bool is_rx) dev->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - dev->latency = (1000000 * dev->threshold) / (1000 * dev->speed / 8); + if (dev->set_mpu_wkup_lat != NULL) + dev->latency = (1000000 * dev->threshold) / + (1000 * dev->speed / 8); } /* @@ -522,6 +524,9 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, dev->buf = msg->buf; dev->buf_len = msg->len; + /* make sure writes to dev->buf_len are ordered */ + barrier(); + omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len); /* Clear the FIFO Buffers */ @@ -579,7 +584,6 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, */ timeout = wait_for_completion_timeout(&dev->cmd_complete, OMAP_I2C_TIMEOUT); - dev->buf_len = 0; if (timeout == 0) { dev_err(dev->dev, "controller timed out\n"); omap_i2c_init(dev); @@ -629,16 +633,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) if (r < 0) goto out; - /* - * When waiting for completion of a i2c transfer, we need to - * set a wake up latency constraint for the MPU. This is to - * ensure quick enough wakeup from idle, when transfer - * completes. - */ - if (dev->latency) - pm_qos_add_request(&dev->pm_qos_request, - PM_QOS_CPU_DMA_LATENCY, - dev->latency); + if (dev->set_mpu_wkup_lat != NULL) + dev->set_mpu_wkup_lat(dev->dev, dev->latency); for (i = 0; i < num; i++) { r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1))); @@ -646,8 +642,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) break; } - if (dev->latency) - pm_qos_remove_request(&dev->pm_qos_request); + if (dev->set_mpu_wkup_lat != NULL) + dev->set_mpu_wkup_lat(dev->dev, -1); if (r == 0) r = num; @@ -1104,6 +1100,7 @@ omap_i2c_probe(struct platform_device *pdev) } else if (pdata != NULL) { dev->speed = pdata->clkrate; dev->flags = pdata->flags; + dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; dev->dtrev = pdata->rev; } @@ -1159,8 +1156,9 @@ omap_i2c_probe(struct platform_device *pdev) dev->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - dev->latency = (1000000 * dev->fifo_size) / - (1000 * dev->speed / 8); + if (dev->set_mpu_wkup_lat != NULL) + dev->latency = (1000000 * dev->fifo_size) / + (1000 * dev->speed / 8); } /* reset ASAP, clearing any IRQs */ diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 3e0335f1fc60..9d902725bac9 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -806,6 +806,7 @@ static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c) dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio); goto free_gpio; } + i2c->gpios[idx] = gpio; ret = gpio_request(gpio, "i2c-bus"); if (ret) { diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index c0ec7d42c3be..1abbc170d8b7 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -26,10 +26,14 @@ static void copy_abs(struct input_dev *dev, unsigned int dst, unsigned int src) * input_mt_init_slots() - initialize MT input slots * @dev: input device supporting MT events and finger tracking * @num_slots: number of slots used by the device + * @flags: mt tasks to handle in core * * This function allocates all necessary memory for MT slot handling * in the input device, prepares the ABS_MT_SLOT and * ABS_MT_TRACKING_ID events for use and sets up appropriate buffers. + * Depending on the flags set, it also performs pointer emulation and + * frame synchronization. + * * May be called repeatedly. Returns -EINVAL if attempting to * reinitialize with a different number of slots. */ diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 8f02e3d0e712..4c842c320c2e 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -12,8 +12,8 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #define MOUSEDEV_MINOR_BASE 32 -#define MOUSEDEV_MINORS 32 -#define MOUSEDEV_MIX 31 +#define MOUSEDEV_MINORS 31 +#define MOUSEDEV_MIX 63 #include <linux/sched.h> #include <linux/slab.h> diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index f02028ec3db6..78e5d9ab0ba7 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -955,7 +955,8 @@ static int ads7846_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ads7846_pm, ads7846_suspend, ads7846_resume); -static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads7846 *ts) +static int __devinit ads7846_setup_pendown(struct spi_device *spi, + struct ads7846 *ts) { struct ads7846_platform_data *pdata = spi->dev.platform_data; int err; @@ -981,6 +982,9 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784 ts->gpio_pendown = pdata->gpio_pendown; + if (pdata->gpio_pendown_debounce) + gpio_set_debounce(pdata->gpio_pendown, + pdata->gpio_pendown_debounce); } else { dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n"); return -EINVAL; diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index d4a4cd445cab..0badfa48b32b 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -4108,7 +4108,7 @@ static void swap_pci_ref(struct pci_dev **from, struct pci_dev *to) static int intel_iommu_add_device(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); - struct pci_dev *bridge, *dma_pdev; + struct pci_dev *bridge, *dma_pdev = NULL; struct iommu_group *group; int ret; @@ -4122,7 +4122,7 @@ static int intel_iommu_add_device(struct device *dev) dma_pdev = pci_get_domain_bus_and_slot( pci_domain_nr(pdev->bus), bridge->subordinate->number, 0); - else + if (!dma_pdev) dma_pdev = pci_dev_get(bridge); } else dma_pdev = pci_dev_get(pdev); diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c index a649f146d17b..4252d743963d 100644 --- a/drivers/iommu/tegra-smmu.c +++ b/drivers/iommu/tegra-smmu.c @@ -34,13 +34,11 @@ #include <linux/of_iommu.h> #include <linux/debugfs.h> #include <linux/seq_file.h> +#include <linux/tegra-ahb.h> #include <asm/page.h> #include <asm/cacheflush.h> -#include <mach/iomap.h> -#include <mach/tegra-ahb.h> - enum smmu_hwgrp { HWGRP_AFI, HWGRP_AVPC, @@ -1054,6 +1052,7 @@ static int smmu_debugfs_stats_show(struct seq_file *s, void *v) stats[i], val, offs); } seq_printf(s, "\n"); + dput(dent); return 0; } diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index f508defc0d96..b58bc8a14b9c 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -379,7 +379,9 @@ config LEDS_NS2 tristate "LED support for Network Space v2 GPIO LEDs" depends on LEDS_CLASS depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || \ - MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2 + MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2 || \ + MACH_NETSPACE_V2_DT || MACH_INETSPACE_V2_DT || \ + MACH_NETSPACE_MAX_V2_DT || MACH_NETSPACE_MINI_V2_DT default y help This option enable support for the dual-GPIO LED found on the diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c index d176ec83f5d9..d64cc2227fd9 100644 --- a/drivers/leds/leds-ns2.c +++ b/drivers/leds/leds-ns2.c @@ -30,6 +30,7 @@ #include <linux/leds.h> #include <linux/module.h> #include <linux/platform_data/leds-kirkwood-ns2.h> +#include <linux/of_gpio.h> /* * The Network Space v2 dual-GPIO LED is wired to a CPLD and can blink in @@ -263,6 +264,62 @@ static void delete_ns2_led(struct ns2_led_data *led_dat) gpio_free(led_dat->slow); } +#ifdef CONFIG_OF_GPIO +/* + * Translate OpenFirmware node properties into platform_data. + */ +static int __devinit +ns2_leds_get_of_pdata(struct device *dev, struct ns2_led_platform_data *pdata) +{ + struct device_node *np = dev->of_node; + struct device_node *child; + struct ns2_led *leds; + int num_leds = 0; + int i = 0; + + num_leds = of_get_child_count(np); + if (!num_leds) + return -ENODEV; + + leds = devm_kzalloc(dev, num_leds * sizeof(struct ns2_led), + GFP_KERNEL); + if (!leds) + return -ENOMEM; + + for_each_child_of_node(np, child) { + const char *string; + int ret; + + ret = of_get_named_gpio(child, "cmd-gpio", 0); + if (ret < 0) + return ret; + leds[i].cmd = ret; + ret = of_get_named_gpio(child, "slow-gpio", 0); + if (ret < 0) + return ret; + leds[i].slow = ret; + ret = of_property_read_string(child, "label", &string); + leds[i].name = (ret == 0) ? string : child->name; + ret = of_property_read_string(child, "linux,default-trigger", + &string); + if (ret == 0) + leds[i].default_trigger = string; + + i++; + } + + pdata->leds = leds; + pdata->num_leds = num_leds; + + return 0; +} + +static const struct of_device_id of_ns2_leds_match[] = { + { .compatible = "lacie,ns2-leds", }, + {}, +}; +#endif /* CONFIG_OF_GPIO */ + static int __devinit ns2_led_probe(struct platform_device *pdev) { struct ns2_led_platform_data *pdata = pdev->dev.platform_data; @@ -270,11 +327,25 @@ static int __devinit ns2_led_probe(struct platform_device *pdev) int i; int ret; +#ifdef CONFIG_OF_GPIO + if (!pdata) { + pdata = devm_kzalloc(&pdev->dev, + sizeof(struct ns2_led_platform_data), + GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + ret = ns2_leds_get_of_pdata(&pdev->dev, pdata); + if (ret) + return ret; + } +#else if (!pdata) return -EINVAL; +#endif /* CONFIG_OF_GPIO */ leds_data = devm_kzalloc(&pdev->dev, sizeof(struct ns2_led_data) * - pdata->num_leds, GFP_KERNEL); + pdata->num_leds, GFP_KERNEL); if (!leds_data) return -ENOMEM; @@ -312,8 +383,9 @@ static struct platform_driver ns2_led_driver = { .probe = ns2_led_probe, .remove = __devexit_p(ns2_led_remove), .driver = { - .name = "leds-ns2", - .owner = THIS_MODULE, + .name = "leds-ns2", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(of_ns2_leds_match), }, }; diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 02db9183ca01..77e6eff41cae 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -740,8 +740,14 @@ static void rq_completed(struct mapped_device *md, int rw, int run_queue) if (!md_in_flight(md)) wake_up(&md->wait); + /* + * Run this off this callpath, as drivers could invoke end_io while + * inside their request_fn (and holding the queue lock). Calling + * back into ->request_fn() could deadlock attempting to grab the + * queue lock again. + */ if (run_queue) - blk_run_queue(md->queue); + blk_run_queue_async(md->queue); /* * dm_put() must be at the end of this function. See the comment above diff --git a/drivers/md/md.c b/drivers/md/md.c index 9ab768acfb62..61200717687b 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1817,10 +1817,10 @@ retry: memset(bbp, 0xff, PAGE_SIZE); for (i = 0 ; i < bb->count ; i++) { - u64 internal_bb = *p++; + u64 internal_bb = p[i]; u64 store_bb = ((BB_OFFSET(internal_bb) << 10) | BB_LEN(internal_bb)); - *bbp++ = cpu_to_le64(store_bb); + bbp[i] = cpu_to_le64(store_bb); } bb->changed = 0; if (read_seqretry(&bb->lock, seq)) @@ -5294,7 +5294,7 @@ void md_stop_writes(struct mddev *mddev) } EXPORT_SYMBOL_GPL(md_stop_writes); -void md_stop(struct mddev *mddev) +static void __md_stop(struct mddev *mddev) { mddev->ready = 0; mddev->pers->stop(mddev); @@ -5304,6 +5304,18 @@ void md_stop(struct mddev *mddev) mddev->pers = NULL; clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); } + +void md_stop(struct mddev *mddev) +{ + /* stop the array and free an attached data structures. + * This is called from dm-raid + */ + __md_stop(mddev); + bitmap_destroy(mddev); + if (mddev->bio_set) + bioset_free(mddev->bio_set); +} + EXPORT_SYMBOL_GPL(md_stop); static int md_set_readonly(struct mddev *mddev, struct block_device *bdev) @@ -5364,7 +5376,7 @@ static int do_md_stop(struct mddev * mddev, int mode, set_disk_ro(disk, 0); __md_stop_writes(mddev); - md_stop(mddev); + __md_stop(mddev); mddev->queue->merge_bvec_fn = NULL; mddev->queue->backing_dev_info.congested_fn = NULL; @@ -7936,9 +7948,9 @@ int md_is_badblock(struct badblocks *bb, sector_t s, int sectors, sector_t *first_bad, int *bad_sectors) { int hi; - int lo = 0; + int lo; u64 *p = bb->page; - int rv = 0; + int rv; sector_t target = s + sectors; unsigned seq; @@ -7953,7 +7965,8 @@ int md_is_badblock(struct badblocks *bb, sector_t s, int sectors, retry: seq = read_seqbegin(&bb->lock); - + lo = 0; + rv = 0; hi = bb->count; /* Binary search between lo and hi for 'target' diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index d1295aff4173..0d5d0ff2c0f7 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -499,7 +499,7 @@ static void raid10_end_write_request(struct bio *bio, int error) */ one_write_done(r10_bio); if (dec_rdev) - rdev_dec_pending(conf->mirrors[dev].rdev, conf->mddev); + rdev_dec_pending(rdev, conf->mddev); } /* @@ -1334,18 +1334,21 @@ retry_write: blocked_rdev = rrdev; break; } + if (rdev && (test_bit(Faulty, &rdev->flags) + || test_bit(Unmerged, &rdev->flags))) + rdev = NULL; if (rrdev && (test_bit(Faulty, &rrdev->flags) || test_bit(Unmerged, &rrdev->flags))) rrdev = NULL; r10_bio->devs[i].bio = NULL; r10_bio->devs[i].repl_bio = NULL; - if (!rdev || test_bit(Faulty, &rdev->flags) || - test_bit(Unmerged, &rdev->flags)) { + + if (!rdev && !rrdev) { set_bit(R10BIO_Degraded, &r10_bio->state); continue; } - if (test_bit(WriteErrorSeen, &rdev->flags)) { + if (rdev && test_bit(WriteErrorSeen, &rdev->flags)) { sector_t first_bad; sector_t dev_sector = r10_bio->devs[i].addr; int bad_sectors; @@ -1387,8 +1390,10 @@ retry_write: max_sectors = good_sectors; } } - r10_bio->devs[i].bio = bio; - atomic_inc(&rdev->nr_pending); + if (rdev) { + r10_bio->devs[i].bio = bio; + atomic_inc(&rdev->nr_pending); + } if (rrdev) { r10_bio->devs[i].repl_bio = bio; atomic_inc(&rrdev->nr_pending); @@ -1444,69 +1449,71 @@ retry_write: for (i = 0; i < conf->copies; i++) { struct bio *mbio; int d = r10_bio->devs[i].devnum; - if (!r10_bio->devs[i].bio) - continue; + if (r10_bio->devs[i].bio) { + struct md_rdev *rdev = conf->mirrors[d].rdev; + mbio = bio_clone_mddev(bio, GFP_NOIO, mddev); + md_trim_bio(mbio, r10_bio->sector - bio->bi_sector, + max_sectors); + r10_bio->devs[i].bio = mbio; + + mbio->bi_sector = (r10_bio->devs[i].addr+ + choose_data_offset(r10_bio, + rdev)); + mbio->bi_bdev = rdev->bdev; + mbio->bi_end_io = raid10_end_write_request; + mbio->bi_rw = WRITE | do_sync | do_fua | do_discard; + mbio->bi_private = r10_bio; - mbio = bio_clone_mddev(bio, GFP_NOIO, mddev); - md_trim_bio(mbio, r10_bio->sector - bio->bi_sector, - max_sectors); - r10_bio->devs[i].bio = mbio; + atomic_inc(&r10_bio->remaining); - mbio->bi_sector = (r10_bio->devs[i].addr+ - choose_data_offset(r10_bio, - conf->mirrors[d].rdev)); - mbio->bi_bdev = conf->mirrors[d].rdev->bdev; - mbio->bi_end_io = raid10_end_write_request; - mbio->bi_rw = WRITE | do_sync | do_fua | do_discard; - mbio->bi_private = r10_bio; + cb = blk_check_plugged(raid10_unplug, mddev, + sizeof(*plug)); + if (cb) + plug = container_of(cb, struct raid10_plug_cb, + cb); + else + plug = NULL; + spin_lock_irqsave(&conf->device_lock, flags); + if (plug) { + bio_list_add(&plug->pending, mbio); + plug->pending_cnt++; + } else { + bio_list_add(&conf->pending_bio_list, mbio); + conf->pending_count++; + } + spin_unlock_irqrestore(&conf->device_lock, flags); + if (!plug) + md_wakeup_thread(mddev->thread); + } - atomic_inc(&r10_bio->remaining); + if (r10_bio->devs[i].repl_bio) { + struct md_rdev *rdev = conf->mirrors[d].replacement; + if (rdev == NULL) { + /* Replacement just got moved to main 'rdev' */ + smp_mb(); + rdev = conf->mirrors[d].rdev; + } + mbio = bio_clone_mddev(bio, GFP_NOIO, mddev); + md_trim_bio(mbio, r10_bio->sector - bio->bi_sector, + max_sectors); + r10_bio->devs[i].repl_bio = mbio; + + mbio->bi_sector = (r10_bio->devs[i].addr + + choose_data_offset( + r10_bio, rdev)); + mbio->bi_bdev = rdev->bdev; + mbio->bi_end_io = raid10_end_write_request; + mbio->bi_rw = WRITE | do_sync | do_fua | do_discard; + mbio->bi_private = r10_bio; - cb = blk_check_plugged(raid10_unplug, mddev, sizeof(*plug)); - if (cb) - plug = container_of(cb, struct raid10_plug_cb, cb); - else - plug = NULL; - spin_lock_irqsave(&conf->device_lock, flags); - if (plug) { - bio_list_add(&plug->pending, mbio); - plug->pending_cnt++; - } else { + atomic_inc(&r10_bio->remaining); + spin_lock_irqsave(&conf->device_lock, flags); bio_list_add(&conf->pending_bio_list, mbio); conf->pending_count++; + spin_unlock_irqrestore(&conf->device_lock, flags); + if (!mddev_check_plugged(mddev)) + md_wakeup_thread(mddev->thread); } - spin_unlock_irqrestore(&conf->device_lock, flags); - if (!plug) - md_wakeup_thread(mddev->thread); - - if (!r10_bio->devs[i].repl_bio) - continue; - - mbio = bio_clone_mddev(bio, GFP_NOIO, mddev); - md_trim_bio(mbio, r10_bio->sector - bio->bi_sector, - max_sectors); - r10_bio->devs[i].repl_bio = mbio; - - /* We are actively writing to the original device - * so it cannot disappear, so the replacement cannot - * become NULL here - */ - mbio->bi_sector = (r10_bio->devs[i].addr + - choose_data_offset( - r10_bio, - conf->mirrors[d].replacement)); - mbio->bi_bdev = conf->mirrors[d].replacement->bdev; - mbio->bi_end_io = raid10_end_write_request; - mbio->bi_rw = WRITE | do_sync | do_fua | do_discard; - mbio->bi_private = r10_bio; - - atomic_inc(&r10_bio->remaining); - spin_lock_irqsave(&conf->device_lock, flags); - bio_list_add(&conf->pending_bio_list, mbio); - conf->pending_count++; - spin_unlock_irqrestore(&conf->device_lock, flags); - if (!mddev_check_plugged(mddev)) - md_wakeup_thread(mddev->thread); } /* Don't remove the bias on 'remaining' (one_write_done) until diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index c5439dce0295..a4502686e7a8 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2774,10 +2774,12 @@ static void handle_stripe_clean_event(struct r5conf *conf, dev = &sh->dev[i]; if (!test_bit(R5_LOCKED, &dev->flags) && (test_bit(R5_UPTODATE, &dev->flags) || - test_and_clear_bit(R5_Discard, &dev->flags))) { + test_bit(R5_Discard, &dev->flags))) { /* We can return any write requests */ struct bio *wbi, *wbi2; pr_debug("Return write for disc %d\n", i); + if (test_and_clear_bit(R5_Discard, &dev->flags)) + clear_bit(R5_UPTODATE, &dev->flags); wbi = dev->written; dev->written = NULL; while (wbi && wbi->bi_sector < @@ -2795,7 +2797,8 @@ static void handle_stripe_clean_event(struct r5conf *conf, !test_bit(STRIPE_DEGRADED, &sh->state), 0); } - } + } else if (test_bit(R5_Discard, &sh->dev[i].flags)) + clear_bit(R5_Discard, &sh->dev[i].flags); if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state)) if (atomic_dec_and_test(&conf->pending_full_writes)) @@ -3490,40 +3493,6 @@ static void handle_stripe(struct stripe_head *sh) handle_failed_sync(conf, sh, &s); } - /* - * might be able to return some write requests if the parity blocks - * are safe, or on a failed drive - */ - pdev = &sh->dev[sh->pd_idx]; - s.p_failed = (s.failed >= 1 && s.failed_num[0] == sh->pd_idx) - || (s.failed >= 2 && s.failed_num[1] == sh->pd_idx); - qdev = &sh->dev[sh->qd_idx]; - s.q_failed = (s.failed >= 1 && s.failed_num[0] == sh->qd_idx) - || (s.failed >= 2 && s.failed_num[1] == sh->qd_idx) - || conf->level < 6; - - if (s.written && - (s.p_failed || ((test_bit(R5_Insync, &pdev->flags) - && !test_bit(R5_LOCKED, &pdev->flags) - && (test_bit(R5_UPTODATE, &pdev->flags) || - test_bit(R5_Discard, &pdev->flags))))) && - (s.q_failed || ((test_bit(R5_Insync, &qdev->flags) - && !test_bit(R5_LOCKED, &qdev->flags) - && (test_bit(R5_UPTODATE, &qdev->flags) || - test_bit(R5_Discard, &qdev->flags)))))) - handle_stripe_clean_event(conf, sh, disks, &s.return_bi); - - /* Now we might consider reading some blocks, either to check/generate - * parity, or to satisfy requests - * or to load a block that is being partially written. - */ - if (s.to_read || s.non_overwrite - || (conf->level == 6 && s.to_write && s.failed) - || (s.syncing && (s.uptodate + s.compute < disks)) - || s.replacing - || s.expanding) - handle_stripe_fill(sh, &s, disks); - /* Now we check to see if any write operations have recently * completed */ @@ -3561,6 +3530,40 @@ static void handle_stripe(struct stripe_head *sh) s.dec_preread_active = 1; } + /* + * might be able to return some write requests if the parity blocks + * are safe, or on a failed drive + */ + pdev = &sh->dev[sh->pd_idx]; + s.p_failed = (s.failed >= 1 && s.failed_num[0] == sh->pd_idx) + || (s.failed >= 2 && s.failed_num[1] == sh->pd_idx); + qdev = &sh->dev[sh->qd_idx]; + s.q_failed = (s.failed >= 1 && s.failed_num[0] == sh->qd_idx) + || (s.failed >= 2 && s.failed_num[1] == sh->qd_idx) + || conf->level < 6; + + if (s.written && + (s.p_failed || ((test_bit(R5_Insync, &pdev->flags) + && !test_bit(R5_LOCKED, &pdev->flags) + && (test_bit(R5_UPTODATE, &pdev->flags) || + test_bit(R5_Discard, &pdev->flags))))) && + (s.q_failed || ((test_bit(R5_Insync, &qdev->flags) + && !test_bit(R5_LOCKED, &qdev->flags) + && (test_bit(R5_UPTODATE, &qdev->flags) || + test_bit(R5_Discard, &qdev->flags)))))) + handle_stripe_clean_event(conf, sh, disks, &s.return_bi); + + /* Now we might consider reading some blocks, either to check/generate + * parity, or to satisfy requests + * or to load a block that is being partially written. + */ + if (s.to_read || s.non_overwrite + || (conf->level == 6 && s.to_write && s.failed) + || (s.syncing && (s.uptodate + s.compute < disks)) + || s.replacing + || s.expanding) + handle_stripe_fill(sh, &s, disks); + /* Now to consider new write requests and what else, if anything * should be read. We do not handle new writes when: * 1/ A 'write' operation (copy+xor) is already in flight. @@ -5529,6 +5532,10 @@ static int run(struct mddev *mddev) * discard data disk but write parity disk */ stripe = stripe * PAGE_SIZE; + /* Round up to power of 2, as discard handling + * currently assumes that */ + while ((stripe-1) & stripe) + stripe = (stripe | (stripe-1)) + 1; mddev->queue->limits.discard_alignment = stripe; mddev->queue->limits.discard_granularity = stripe; /* diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c index 4b1becc86e54..993504015963 100644 --- a/drivers/media/platform/omap/omap_vout.c +++ b/drivers/media/platform/omap/omap_vout.c @@ -45,7 +45,7 @@ #include <media/v4l2-ioctl.h> #include <plat/cpu.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <video/omapvrfb.h> #include <video/omapdss.h> diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c index 8340445a0ee5..cf1c437a8687 100644 --- a/drivers/media/platform/omap/omap_vout_vrfb.c +++ b/drivers/media/platform/omap/omap_vout_vrfb.c @@ -16,7 +16,7 @@ #include <media/videobuf-dma-contig.h> #include <media/v4l2-device.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <video/omapvrfb.h> #include "omap_voutdef.h" diff --git a/drivers/media/platform/omap3isp/ispstat.h b/drivers/media/platform/omap3isp/ispstat.h index 40f87cdd7994..bb363742bd1c 100644 --- a/drivers/media/platform/omap3isp/ispstat.h +++ b/drivers/media/platform/omap3isp/ispstat.h @@ -30,7 +30,7 @@ #include <linux/types.h> #include <linux/omap3isp.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <media/v4l2-event.h> #include "isp.h" diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c index a0b737fecf13..5bd40e6870cc 100644 --- a/drivers/media/platform/omap3isp/ispvideo.c +++ b/drivers/media/platform/omap3isp/ispvideo.c @@ -36,7 +36,6 @@ #include <media/v4l2-ioctl.h> #include <plat/iommu.h> #include <plat/iovmm.h> -#include <plat/omap-pm.h> #include "ispvideo.h" #include "isp.h" diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c index 9fd9d1c5b218..e575ae82771d 100644 --- a/drivers/media/platform/soc_camera/mx2_camera.c +++ b/drivers/media/platform/soc_camera/mx2_camera.c @@ -41,7 +41,6 @@ #include <linux/videodev2.h> #include <linux/platform_data/camera-mx2.h> -#include <mach/hardware.h> #include <asm/dma.h> @@ -121,11 +120,13 @@ #define CSICR1 0x00 #define CSICR2 0x04 -#define CSISR (cpu_is_mx27() ? 0x08 : 0x18) +#define CSISR_IMX25 0x18 +#define CSISR_IMX27 0x08 #define CSISTATFIFO 0x0c #define CSIRFIFO 0x10 #define CSIRXCNT 0x14 -#define CSICR3 (cpu_is_mx27() ? 0x1C : 0x08) +#define CSICR3_IMX25 0x08 +#define CSICR3_IMX27 0x1c #define CSIDMASA_STATFIFO 0x20 #define CSIDMATA_STATFIFO 0x24 #define CSIDMASA_FB1 0x28 @@ -268,6 +269,11 @@ struct mx2_buffer { struct mx2_buf_internal internal; }; +enum mx2_camera_type { + IMX25_CAMERA, + IMX27_CAMERA, +}; + struct mx2_camera_dev { struct device *dev; struct soc_camera_host soc_host; @@ -291,6 +297,9 @@ struct mx2_camera_dev { struct mx2_buffer *fb2_active; u32 csicr1; + u32 reg_csisr; + u32 reg_csicr3; + enum mx2_camera_type devtype; struct mx2_buf_internal buf_discard[2]; void *discard_buffer; @@ -303,6 +312,29 @@ struct mx2_camera_dev { struct vb2_alloc_ctx *alloc_ctx; }; +static struct platform_device_id mx2_camera_devtype[] = { + { + .name = "imx25-camera", + .driver_data = IMX25_CAMERA, + }, { + .name = "imx27-camera", + .driver_data = IMX27_CAMERA, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, mx2_camera_devtype); + +static inline int is_imx25_camera(struct mx2_camera_dev *pcdev) +{ + return pcdev->devtype == IMX25_CAMERA; +} + +static inline int is_imx27_camera(struct mx2_camera_dev *pcdev) +{ + return pcdev->devtype == IMX27_CAMERA; +} + static struct mx2_buffer *mx2_ibuf_to_buf(struct mx2_buf_internal *int_buf) { return container_of(int_buf, struct mx2_buffer, internal); @@ -434,9 +466,9 @@ static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev) clk_disable_unprepare(pcdev->clk_csi); writel(0, pcdev->base_csi + CSICR1); - if (cpu_is_mx27()) { + if (is_imx27_camera(pcdev)) { writel(0, pcdev->base_emma + PRP_CNTL); - } else if (cpu_is_mx25()) { + } else if (is_imx25_camera(pcdev)) { spin_lock_irqsave(&pcdev->lock, flags); pcdev->fb1_active = NULL; pcdev->fb2_active = NULL; @@ -466,7 +498,7 @@ static int mx2_camera_add_device(struct soc_camera_device *icd) csicr1 = CSICR1_MCLKEN; - if (cpu_is_mx27()) + if (is_imx27_camera(pcdev)) csicr1 |= CSICR1_PRP_IF_EN | CSICR1_FCC | CSICR1_RXFF_LEVEL(0); @@ -542,7 +574,7 @@ out: static irqreturn_t mx25_camera_irq(int irq_csi, void *data) { struct mx2_camera_dev *pcdev = data; - u32 status = readl(pcdev->base_csi + CSISR); + u32 status = readl(pcdev->base_csi + pcdev->reg_csisr); if (status & CSISR_DMA_TSF_FB1_INT) mx25_camera_frame_done(pcdev, 1, MX2_STATE_DONE); @@ -551,7 +583,7 @@ static irqreturn_t mx25_camera_irq(int irq_csi, void *data) /* FIXME: handle CSISR_RFF_OR_INT */ - writel(status, pcdev->base_csi + CSISR); + writel(status, pcdev->base_csi + pcdev->reg_csisr); return IRQ_HANDLED; } @@ -636,7 +668,7 @@ static void mx2_videobuf_queue(struct vb2_buffer *vb) buf->state = MX2_STATE_QUEUED; list_add_tail(&buf->internal.queue, &pcdev->capture); - if (cpu_is_mx25()) { + if (is_imx25_camera(pcdev)) { u32 csicr3, dma_inten = 0; if (pcdev->fb1_active == NULL) { @@ -655,20 +687,20 @@ static void mx2_videobuf_queue(struct vb2_buffer *vb) list_del(&buf->internal.queue); buf->state = MX2_STATE_ACTIVE; - csicr3 = readl(pcdev->base_csi + CSICR3); + csicr3 = readl(pcdev->base_csi + pcdev->reg_csicr3); /* Reflash DMA */ writel(csicr3 | CSICR3_DMA_REFLASH_RFF, - pcdev->base_csi + CSICR3); + pcdev->base_csi + pcdev->reg_csicr3); /* clear & enable interrupts */ - writel(dma_inten, pcdev->base_csi + CSISR); + writel(dma_inten, pcdev->base_csi + pcdev->reg_csisr); pcdev->csicr1 |= dma_inten; writel(pcdev->csicr1, pcdev->base_csi + CSICR1); /* enable DMA */ csicr3 |= CSICR3_DMA_REQ_EN_RFF | CSICR3_RXFF_LEVEL(1); - writel(csicr3, pcdev->base_csi + CSICR3); + writel(csicr3, pcdev->base_csi + pcdev->reg_csicr3); } } @@ -712,7 +744,7 @@ static void mx2_videobuf_release(struct vb2_buffer *vb) */ spin_lock_irqsave(&pcdev->lock, flags); - if (cpu_is_mx25() && buf->state == MX2_STATE_ACTIVE) { + if (is_imx25_camera(pcdev) && buf->state == MX2_STATE_ACTIVE) { if (pcdev->fb1_active == buf) { pcdev->csicr1 &= ~CSICR1_FB1_DMA_INTEN; writel(0, pcdev->base_csi + CSIDMASA_FB1); @@ -835,7 +867,7 @@ static int mx2_start_streaming(struct vb2_queue *q, unsigned int count) unsigned long phys; int bytesperline; - if (cpu_is_mx27()) { + if (is_imx27_camera(pcdev)) { unsigned long flags; if (count < 2) return -EINVAL; @@ -930,7 +962,7 @@ static int mx2_stop_streaming(struct vb2_queue *q) void *b; u32 cntl; - if (cpu_is_mx27()) { + if (is_imx27_camera(pcdev)) { spin_lock_irqsave(&pcdev->lock, flags); cntl = readl(pcdev->base_emma + PRP_CNTL); @@ -1082,11 +1114,11 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd) if (bytesperline < 0) return bytesperline; - if (cpu_is_mx27()) { + if (is_imx27_camera(pcdev)) { ret = mx27_camera_emma_prp_reset(pcdev); if (ret) return ret; - } else if (cpu_is_mx25()) { + } else if (is_imx25_camera(pcdev)) { writel((bytesperline * icd->user_height) >> 2, pcdev->base_csi + CSIRXCNT); writel((bytesperline << 16) | icd->user_height, @@ -1392,7 +1424,7 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd, /* FIXME: implement MX27 limits */ /* limit to MX25 hardware capabilities */ - if (cpu_is_mx25()) { + if (is_imx25_camera(pcdev)) { if (xlate->host_fmt->bits_per_sample <= 8) width_limit = 0xffff * 4; else @@ -1726,6 +1758,20 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) goto exit; } + pcdev->devtype = pdev->id_entry->driver_data; + switch (pcdev->devtype) { + case IMX25_CAMERA: + pcdev->reg_csisr = CSISR_IMX25; + pcdev->reg_csicr3 = CSICR3_IMX25; + break; + case IMX27_CAMERA: + pcdev->reg_csisr = CSISR_IMX27; + pcdev->reg_csicr3 = CSICR3_IMX27; + break; + default: + break; + } + pcdev->clk_csi = devm_clk_get(&pdev->dev, "ahb"); if (IS_ERR(pcdev->clk_csi)) { dev_err(&pdev->dev, "Could not get csi clock\n"); @@ -1763,7 +1809,7 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) pcdev->dev = &pdev->dev; platform_set_drvdata(pdev, pcdev); - if (cpu_is_mx25()) { + if (is_imx25_camera(pcdev)) { err = devm_request_irq(&pdev->dev, irq_csi, mx25_camera_irq, 0, MX2_CAM_DRV_NAME, pcdev); if (err) { @@ -1772,7 +1818,7 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) } } - if (cpu_is_mx27()) { + if (is_imx27_camera(pcdev)) { err = mx27_camera_emma_init(pdev); if (err) goto exit; @@ -1789,7 +1835,7 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) pcdev->soc_host.priv = pcdev; pcdev->soc_host.v4l2_dev.dev = &pdev->dev; pcdev->soc_host.nr = pdev->id; - if (cpu_is_mx25()) + if (is_imx25_camera(pcdev)) pcdev->soc_host.capabilities = SOCAM_HOST_CAP_STRIDE; pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); @@ -1809,7 +1855,7 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev) exit_free_emma: vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); eallocctx: - if (cpu_is_mx27()) { + if (is_imx27_camera(pcdev)) { clk_disable_unprepare(pcdev->clk_emma_ipg); clk_disable_unprepare(pcdev->clk_emma_ahb); } @@ -1827,7 +1873,7 @@ static int __devexit mx2_camera_remove(struct platform_device *pdev) vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); - if (cpu_is_mx27()) { + if (is_imx27_camera(pcdev)) { clk_disable_unprepare(pcdev->clk_emma_ipg); clk_disable_unprepare(pcdev->clk_emma_ahb); } @@ -1841,6 +1887,7 @@ static struct platform_driver mx2_camera_driver = { .driver = { .name = MX2_CAM_DRV_NAME, }, + .id_table = mx2_camera_devtype, .remove = __devexit_p(mx2_camera_remove), }; diff --git a/drivers/media/platform/soc_camera/mx3_camera.c b/drivers/media/platform/soc_camera/mx3_camera.c index 3557ac97e430..64d39b1b5582 100644 --- a/drivers/media/platform/soc_camera/mx3_camera.c +++ b/drivers/media/platform/soc_camera/mx3_camera.c @@ -17,6 +17,7 @@ #include <linux/vmalloc.h> #include <linux/interrupt.h> #include <linux/sched.h> +#include <linux/dma/ipu-dma.h> #include <media/v4l2-common.h> #include <media/v4l2-dev.h> @@ -24,7 +25,6 @@ #include <media/soc_camera.h> #include <media/soc_mediabus.h> -#include <mach/ipu.h> #include <linux/platform_data/camera-mx3.h> #include <linux/platform_data/dma-imx.h> diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c index cae9ce6275e9..611595f1a75e 100644 --- a/drivers/media/platform/soc_camera/omap1_camera.c +++ b/drivers/media/platform/soc_camera/omap1_camera.c @@ -34,7 +34,7 @@ #include <media/videobuf-dma-contig.h> #include <media/videobuf-dma-sg.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #define DRIVER_NAME "omap1-camera" diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 6290b7f1ccfe..477f63bad521 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -41,7 +41,6 @@ #include <linux/platform_data/mmc-mxcmmc.h> #include <linux/platform_data/dma-imx.h> -#include <mach/hardware.h> #define DRIVER_NAME "mxc-mmc" #define MXCMCI_TIMEOUT_MS 10000 @@ -113,6 +112,11 @@ #define INT_WRITE_OP_DONE_EN (1 << 1) #define INT_READ_OP_EN (1 << 0) +enum mxcmci_type { + IMX21_MMC, + IMX31_MMC, +}; + struct mxcmci_host { struct mmc_host *mmc; struct resource *res; @@ -153,7 +157,26 @@ struct mxcmci_host { struct imx_dma_data dma_data; struct timer_list watchdog; + enum mxcmci_type devtype; +}; + +static struct platform_device_id mxcmci_devtype[] = { + { + .name = "imx21-mmc", + .driver_data = IMX21_MMC, + }, { + .name = "imx31-mmc", + .driver_data = IMX31_MMC, + }, { + /* sentinel */ + } }; +MODULE_DEVICE_TABLE(platform, mxcmci_devtype); + +static inline int is_imx31_mmc(struct mxcmci_host *host) +{ + return host->devtype == IMX31_MMC; +} static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios); @@ -843,6 +866,8 @@ static void mxcmci_enable_sdio_irq(struct mmc_host *mmc, int enable) static void mxcmci_init_card(struct mmc_host *host, struct mmc_card *card) { + struct mxcmci_host *mxcmci = mmc_priv(host); + /* * MX3 SoCs have a silicon bug which corrupts CRC calculation of * multi-block transfers when connected SDIO peripheral doesn't @@ -850,7 +875,7 @@ static void mxcmci_init_card(struct mmc_host *host, struct mmc_card *card) * One way to prevent this is to only allow 1-bit transfers. */ - if (cpu_is_mx3() && card->type == MMC_TYPE_SDIO) + if (is_imx31_mmc(mxcmci) && card->type == MMC_TYPE_SDIO) host->caps &= ~MMC_CAP_4_BIT_DATA; else host->caps |= MMC_CAP_4_BIT_DATA; @@ -948,6 +973,7 @@ static int mxcmci_probe(struct platform_device *pdev) host->mmc = mmc; host->pdata = pdev->dev.platform_data; + host->devtype = pdev->id_entry->driver_data; spin_lock_init(&host->lock); mxcmci_init_ocr(host); @@ -1120,6 +1146,7 @@ static const struct dev_pm_ops mxcmci_pm_ops = { static struct platform_driver mxcmci_driver = { .probe = mxcmci_probe, .remove = mxcmci_remove, + .id_table = mxcmci_devtype, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 8f52fc858e48..5a5cd2ace4a6 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -240,7 +240,7 @@ static int parse_cmdline(char *devname, char *szstart, char *szlength) if (*(szlength) != '+') { devlength = simple_strtoul(szlength, &buffer, 0); - devlength = handle_unit(devlength, buffer) - devstart; + devlength = handle_unit(devlength, buffer); if (devlength < devstart) goto err_out; diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 72e31d86030d..022dcdc256fb 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -37,15 +37,9 @@ #include <asm/mach/flash.h> #include <linux/platform_data/mtd-mxc_nand.h> -#include <mach/hardware.h> #define DRIVER_NAME "mxc_nand" -#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35()) -#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21()) -#define nfc_is_v3_2a() cpu_is_mx51() -#define nfc_is_v3_2b() cpu_is_mx53() - /* Addresses for NFC registers */ #define NFC_V1_V2_BUF_SIZE (host->regs + 0x00) #define NFC_V1_V2_BUF_ADDR (host->regs + 0x04) @@ -1283,6 +1277,53 @@ static const struct mxc_nand_devtype_data imx53_nand_devtype_data = { .ppb_shift = 8, }; +static inline int is_imx21_nfc(struct mxc_nand_host *host) +{ + return host->devtype_data == &imx21_nand_devtype_data; +} + +static inline int is_imx27_nfc(struct mxc_nand_host *host) +{ + return host->devtype_data == &imx27_nand_devtype_data; +} + +static inline int is_imx25_nfc(struct mxc_nand_host *host) +{ + return host->devtype_data == &imx25_nand_devtype_data; +} + +static inline int is_imx51_nfc(struct mxc_nand_host *host) +{ + return host->devtype_data == &imx51_nand_devtype_data; +} + +static inline int is_imx53_nfc(struct mxc_nand_host *host) +{ + return host->devtype_data == &imx53_nand_devtype_data; +} + +static struct platform_device_id mxcnd_devtype[] = { + { + .name = "imx21-nand", + .driver_data = (kernel_ulong_t) &imx21_nand_devtype_data, + }, { + .name = "imx27-nand", + .driver_data = (kernel_ulong_t) &imx27_nand_devtype_data, + }, { + .name = "imx25-nand", + .driver_data = (kernel_ulong_t) &imx25_nand_devtype_data, + }, { + .name = "imx51-nand", + .driver_data = (kernel_ulong_t) &imx51_nand_devtype_data, + }, { + .name = "imx53-nand", + .driver_data = (kernel_ulong_t) &imx53_nand_devtype_data, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, mxcnd_devtype); + #ifdef CONFIG_OF_MTD static const struct of_device_id mxcnd_dt_ids[] = { { @@ -1337,32 +1378,6 @@ static int __init mxcnd_probe_dt(struct mxc_nand_host *host) } #endif -static int __init mxcnd_probe_pdata(struct mxc_nand_host *host) -{ - struct mxc_nand_platform_data *pdata = host->dev->platform_data; - - if (!pdata) - return -ENODEV; - - host->pdata = *pdata; - - if (nfc_is_v1()) { - if (cpu_is_mx21()) - host->devtype_data = &imx21_nand_devtype_data; - else - host->devtype_data = &imx27_nand_devtype_data; - } else if (nfc_is_v21()) { - host->devtype_data = &imx25_nand_devtype_data; - } else if (nfc_is_v3_2a()) { - host->devtype_data = &imx51_nand_devtype_data; - } else if (nfc_is_v3_2b()) { - host->devtype_data = &imx53_nand_devtype_data; - } else - BUG(); - - return 0; -} - static int __devinit mxcnd_probe(struct platform_device *pdev) { struct nand_chip *this; @@ -1404,8 +1419,16 @@ static int __devinit mxcnd_probe(struct platform_device *pdev) return PTR_ERR(host->clk); err = mxcnd_probe_dt(host); - if (err > 0) - err = mxcnd_probe_pdata(host); + if (err > 0) { + struct mxc_nand_platform_data *pdata = pdev->dev.platform_data; + if (pdata) { + host->pdata = *pdata; + host->devtype_data = (struct mxc_nand_devtype_data *) + pdev->id_entry->driver_data; + } else { + err = -ENODEV; + } + } if (err < 0) return err; @@ -1494,7 +1517,7 @@ static int __devinit mxcnd_probe(struct platform_device *pdev) } /* first scan to find the device and get the page size */ - if (nand_scan_ident(mtd, nfc_is_v21() ? 4 : 1, NULL)) { + if (nand_scan_ident(mtd, is_imx25_nfc(host) ? 4 : 1, NULL)) { err = -ENXIO; goto escan; } @@ -1508,7 +1531,7 @@ static int __devinit mxcnd_probe(struct platform_device *pdev) this->ecc.layout = host->devtype_data->ecclayout_4k; if (this->ecc.mode == NAND_ECC_HW) { - if (nfc_is_v1()) + if (is_imx21_nfc(host) || is_imx27_nfc(host)) this->ecc.strength = 1; else this->ecc.strength = (host->eccsize == 4) ? 4 : 8; @@ -1555,6 +1578,7 @@ static struct platform_driver mxcnd_driver = { .owner = THIS_MODULE, .of_match_table = of_match_ptr(mxcnd_dt_ids), }, + .id_table = mxcnd_devtype, .probe = mxcnd_probe, .remove = __devexit_p(mxcnd_remove), }; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index ec6841d8e956..1a03b7f673ce 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2983,13 +2983,15 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, /* * Field definitions are in the following datasheets: * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32) - * New style (6 byte ID): Samsung K9GAG08U0F (p.44) + * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44) * Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22) * - * Check for ID length, cell type, and Hynix/Samsung ID to decide what - * to do. + * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung + * ID to decide what to do. */ - if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG) { + if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG && + (chip->cellinfo & NAND_CI_CELLTYPE_MSK) && + id_data[5] != 0x00) { /* Calc pagesize */ mtd->writesize = 2048 << (extid & 0x03); extid >>= 2; diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 5c8978e90240..1f34ba104ef4 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -27,7 +27,6 @@ #include <linux/bch.h> #endif -#include <plat-omap/dma-omap.h> #include <linux/platform_data/mtd-nand-omap2.h> #define DRIVER_NAME "omap2-nand" diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c index 64be8f0848b0..d9127e2ed808 100644 --- a/drivers/mtd/ofpart.c +++ b/drivers/mtd/ofpart.c @@ -121,7 +121,7 @@ static int parse_ofoldpart_partitions(struct mtd_info *master, nr_parts = plen / sizeof(part[0]); *pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL); - if (!pparts) + if (!*pparts) return -ENOMEM; names = of_get_property(dp, "partition-names", &plen); diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 99f96e19ebea..00cd3da29435 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -41,7 +41,7 @@ #include <linux/platform_data/mtd-onenand-omap2.h> #include <asm/gpio.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #define DRIVER_NAME "omap2-onenand" diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 7153e0d27101..b3f41f200622 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -3694,7 +3694,7 @@ static int flexonenand_check_blocks_erased(struct mtd_info *mtd, int start, int * flexonenand_set_boundary - Writes the SLC boundary * @param mtd - mtd info structure */ -int flexonenand_set_boundary(struct mtd_info *mtd, int die, +static int flexonenand_set_boundary(struct mtd_info *mtd, int die, int boundary, int lock) { struct onenand_chip *this = mtd->priv; diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index b2530b002125..5f5b69f37d2e 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1379,6 +1379,8 @@ static void bond_compute_features(struct bonding *bond) struct net_device *bond_dev = bond->dev; netdev_features_t vlan_features = BOND_VLAN_FEATURES; unsigned short max_hard_header_len = ETH_HLEN; + unsigned int gso_max_size = GSO_MAX_SIZE; + u16 gso_max_segs = GSO_MAX_SEGS; int i; unsigned int flags, dst_release_flag = IFF_XMIT_DST_RELEASE; @@ -1394,11 +1396,16 @@ static void bond_compute_features(struct bonding *bond) dst_release_flag &= slave->dev->priv_flags; if (slave->dev->hard_header_len > max_hard_header_len) max_hard_header_len = slave->dev->hard_header_len; + + gso_max_size = min(gso_max_size, slave->dev->gso_max_size); + gso_max_segs = min(gso_max_segs, slave->dev->gso_max_segs); } done: bond_dev->vlan_features = vlan_features; bond_dev->hard_header_len = max_hard_header_len; + bond_dev->gso_max_segs = gso_max_segs; + netif_set_gso_max_size(bond_dev, gso_max_size); flags = bond_dev->priv_flags & ~IFF_XMIT_DST_RELEASE; bond_dev->priv_flags = flags | dst_release_flag; diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c index d04911d33b64..47618e505355 100644 --- a/drivers/net/ethernet/8390/ne.c +++ b/drivers/net/ethernet/8390/ne.c @@ -813,6 +813,7 @@ static int __init ne_drv_probe(struct platform_device *pdev) dev->irq = irq[this_dev]; dev->mem_end = bad[this_dev]; } + SET_NETDEV_DEV(dev, &pdev->dev); err = do_ne_probe(dev); if (err) { free_netdev(dev); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index bd1fd3d87c24..01611b33a93d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9545,10 +9545,13 @@ static int __devinit bnx2x_prev_unload_common(struct bnx2x *bp) */ static void __devinit bnx2x_prev_interrupted_dmae(struct bnx2x *bp) { - u32 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS); - if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) { - BNX2X_ERR("was error bit was found to be set in pglueb upon startup. Clearing"); - REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, 1 << BP_FUNC(bp)); + if (!CHIP_IS_E1x(bp)) { + u32 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) { + BNX2X_ERR("was error bit was found to be set in pglueb upon startup. Clearing"); + REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, + 1 << BP_FUNC(bp)); + } } } diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index 1c818254b7be..b01f83a044c4 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -979,17 +979,6 @@ static void cp_init_hw (struct cp_private *cp) cpw32_f (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0))); cpw32_f (MAC0 + 4, le32_to_cpu (*(__le32 *) (dev->dev_addr + 4))); - cpw32_f(HiTxRingAddr, 0); - cpw32_f(HiTxRingAddr + 4, 0); - - ring_dma = cp->ring_dma; - cpw32_f(RxRingAddr, ring_dma & 0xffffffff); - cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16); - - ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE; - cpw32_f(TxRingAddr, ring_dma & 0xffffffff); - cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16); - cp_start_hw(cp); cpw8(TxThresh, 0x06); /* XXX convert magic num to a constant */ @@ -1003,6 +992,17 @@ static void cp_init_hw (struct cp_private *cp) cpw8(Config5, cpr8(Config5) & PMEStatus); + cpw32_f(HiTxRingAddr, 0); + cpw32_f(HiTxRingAddr + 4, 0); + + ring_dma = cp->ring_dma; + cpw32_f(RxRingAddr, ring_dma & 0xffffffff); + cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16); + + ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE; + cpw32_f(TxRingAddr, ring_dma & 0xffffffff); + cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16); + cpw16(MultiIntr, 0); cpw8_f(Cfg9346, Cfg9346_Lock); diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c index fb9f6b38511f..edf5edb13140 100644 --- a/drivers/net/ethernet/sis/sis900.c +++ b/drivers/net/ethernet/sis/sis900.c @@ -2479,7 +2479,7 @@ static int sis900_resume(struct pci_dev *pci_dev) netif_start_queue(net_dev); /* Workaround for EDB */ - sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED); + sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED); /* Enable all known interrupts by setting the interrupt mask. */ sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE); diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 77e6db9dcfed..a788501e978e 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -894,6 +894,8 @@ out: return IRQ_HANDLED; } +static void axienet_dma_err_handler(unsigned long data); + /** * axienet_open - Driver open routine. * @ndev: Pointer to net_device structure diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c index 98934bdf6acf..477d6729b17f 100644 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c @@ -1102,10 +1102,12 @@ static int init_queues(struct port *port) { int i; - if (!ports_open) - if (!(dma_pool = dma_pool_create(DRV_NAME, NULL, - POOL_ALLOC_SIZE, 32, 0))) + if (!ports_open) { + dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev, + POOL_ALLOC_SIZE, 32, 0); + if (!dma_pool) return -ENOMEM; + } if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL, &port->desc_tab_phys))) diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c index 5039f08f5a5b..43e9ab4f4d7e 100644 --- a/drivers/net/irda/sir_dev.c +++ b/drivers/net/irda/sir_dev.c @@ -222,7 +222,7 @@ static void sirdev_config_fsm(struct work_struct *work) break; case SIRDEV_STATE_DONGLE_SPEED: - if (dev->dongle_drv->reset) { + if (dev->dongle_drv->set_speed) { ret = dev->dongle_drv->set_speed(dev, fsm->param); if (ret < 0) { fsm->result = ret; diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 899274f2f9b1..2ed1140df3e9 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -185,17 +185,20 @@ static int __devinit mdio_gpio_probe(struct platform_device *pdev) { struct mdio_gpio_platform_data *pdata; struct mii_bus *new_bus; - int ret; + int ret, bus_id; - if (pdev->dev.of_node) + if (pdev->dev.of_node) { pdata = mdio_gpio_of_get_data(pdev); - else + bus_id = of_alias_get_id(pdev->dev.of_node, "mdio-gpio"); + } else { pdata = pdev->dev.platform_data; + bus_id = pdev->id; + } if (!pdata) return -ENODEV; - new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id); + new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, bus_id); if (!new_bus) return -ENODEV; diff --git a/drivers/net/team/team_mode_broadcast.c b/drivers/net/team/team_mode_broadcast.c index 9db0171e9366..c5db428e73fa 100644 --- a/drivers/net/team/team_mode_broadcast.c +++ b/drivers/net/team/team_mode_broadcast.c @@ -29,8 +29,8 @@ static bool bc_transmit(struct team *team, struct sk_buff *skb) if (last) { skb2 = skb_clone(skb, GFP_ATOMIC); if (skb2) { - ret = team_dev_queue_xmit(team, last, - skb2); + ret = !team_dev_queue_xmit(team, last, + skb2); if (!sum_ret) sum_ret = ret; } @@ -39,7 +39,7 @@ static bool bc_transmit(struct team *team, struct sk_buff *skb) } } if (last) { - ret = team_dev_queue_xmit(team, last, skb); + ret = !team_dev_queue_xmit(team, last, skb); if (!sum_ret) sum_ret = ret; } diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c index 3f575afd8cfc..e9a3da588e95 100644 --- a/drivers/net/wan/ixp4xx_hss.c +++ b/drivers/net/wan/ixp4xx_hss.c @@ -969,10 +969,12 @@ static int init_hdlc_queues(struct port *port) { int i; - if (!ports_open) - if (!(dma_pool = dma_pool_create(DRV_NAME, NULL, - POOL_ALLOC_SIZE, 32, 0))) + if (!ports_open) { + dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev, + POOL_ALLOC_SIZE, 32, 0); + if (!dma_pool) return -ENOMEM; + } if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL, &port->desc_tab_phys))) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 8e1559aba495..1829b445d0b0 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1456,7 +1456,7 @@ static bool ath9k_hw_set_reset_reg(struct ath_hw *ah, u32 type) switch (type) { case ATH9K_RESET_POWER_ON: ret = ath9k_hw_set_reset_power_on(ah); - if (!ret) + if (ret) ah->reset_power_on = true; break; case ATH9K_RESET_WARM: diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index fa4d1b8cd9f6..2d9eee93c743 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -1354,6 +1354,20 @@ static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, vif_priv->ctx = ctx; ctx->vif = vif; + /* + * In SNIFFER device type, the firmware reports the FCS to + * the host, rather than snipping it off. Unfortunately, + * mac80211 doesn't (yet) provide a per-packet flag for + * this, so that we have to set the hardware flag based + * on the interfaces added. As the monitor interface can + * only be present by itself, and will be removed before + * other interfaces are added, this is safe. + */ + if (vif->type == NL80211_IFTYPE_MONITOR) + priv->hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS; + else + priv->hw->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS; + err = iwl_setup_interface(priv, ctx); if (!err || reset) goto out; diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 105e3af3c621..79a4ddc002d3 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -480,20 +480,12 @@ void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, int fifo, void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int txq_id) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - u16 rd_ptr, wr_ptr; - int n_bd = trans_pcie->txq[txq_id].q.n_bd; if (!test_and_clear_bit(txq_id, trans_pcie->queue_used)) { WARN_ONCE(1, "queue %d not used", txq_id); return; } - rd_ptr = iwl_read_prph(trans, SCD_QUEUE_RDPTR(txq_id)) & (n_bd - 1); - wr_ptr = iwl_read_prph(trans, SCD_QUEUE_WRPTR(txq_id)); - - WARN_ONCE(rd_ptr != wr_ptr, "queue %d isn't empty: [%d,%d]", - txq_id, rd_ptr, wr_ptr); - iwl_txq_set_inactive(trans, txq_id); IWL_DEBUG_TX_QUEUES(trans, "Deactivate queue %d\n", txq_id); } diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index 8d465107f52b..ae9010ed58de 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -890,9 +890,6 @@ mwifiex_cmd_timeout_func(unsigned long function_context) return; } cmd_node = adapter->curr_cmd; - if (cmd_node->wait_q_enabled) - adapter->cmd_wait_q.status = -ETIMEDOUT; - if (cmd_node) { adapter->dbg.timeout_cmd_id = adapter->dbg.last_cmd_id[adapter->dbg.last_cmd_index]; @@ -938,6 +935,14 @@ mwifiex_cmd_timeout_func(unsigned long function_context) dev_err(adapter->dev, "ps_mode=%d ps_state=%d\n", adapter->ps_mode, adapter->ps_state); + + if (cmd_node->wait_q_enabled) { + adapter->cmd_wait_q.status = -ETIMEDOUT; + wake_up_interruptible(&adapter->cmd_wait_q.wait); + mwifiex_cancel_pending_ioctl(adapter); + /* reset cmd_sent flag to unblock new commands */ + adapter->cmd_sent = false; + } } if (adapter->hw_status == MWIFIEX_HW_STATUS_INITIALIZING) mwifiex_init_fw_complete(adapter); diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c index fc8a9bfa1248..82cf0fa2d9f6 100644 --- a/drivers/net/wireless/mwifiex/sdio.c +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -161,7 +161,6 @@ static int mwifiex_sdio_suspend(struct device *dev) struct sdio_mmc_card *card; struct mwifiex_adapter *adapter; mmc_pm_flag_t pm_flag = 0; - int hs_actived = 0; int i; int ret = 0; @@ -188,12 +187,14 @@ static int mwifiex_sdio_suspend(struct device *dev) adapter = card->adapter; /* Enable the Host Sleep */ - hs_actived = mwifiex_enable_hs(adapter); - if (hs_actived) { - pr_debug("cmd: suspend with MMC_PM_KEEP_POWER\n"); - ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); + if (!mwifiex_enable_hs(adapter)) { + dev_err(adapter->dev, "cmd: failed to suspend\n"); + return -EFAULT; } + dev_dbg(adapter->dev, "cmd: suspend with MMC_PM_KEEP_POWER\n"); + ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); + /* Indicate device suspended */ adapter->is_suspended = true; diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 9970c2b1b199..b7e6607e6b6d 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -297,6 +297,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = { /*=== Customer ID ===*/ /****** 8188CU ********/ {RTL_USB_DEVICE(0x050d, 0x1102, rtl92cu_hal_cfg)}, /*Belkin - Edimax*/ + {RTL_USB_DEVICE(0x050d, 0x11f2, rtl92cu_hal_cfg)}, /*Belkin - ISY*/ {RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/ {RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/ {RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/ diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index caa011008cd0..fc24eb9b3948 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -452,29 +452,85 @@ static void xennet_make_frags(struct sk_buff *skb, struct net_device *dev, /* Grant backend access to each skb fragment page. */ for (i = 0; i < frags; i++) { skb_frag_t *frag = skb_shinfo(skb)->frags + i; + struct page *page = skb_frag_page(frag); - tx->flags |= XEN_NETTXF_more_data; + len = skb_frag_size(frag); + offset = frag->page_offset; - id = get_id_from_freelist(&np->tx_skb_freelist, np->tx_skbs); - np->tx_skbs[id].skb = skb_get(skb); - tx = RING_GET_REQUEST(&np->tx, prod++); - tx->id = id; - ref = gnttab_claim_grant_reference(&np->gref_tx_head); - BUG_ON((signed short)ref < 0); + /* Data must not cross a page boundary. */ + BUG_ON(len + offset > PAGE_SIZE<<compound_order(page)); - mfn = pfn_to_mfn(page_to_pfn(skb_frag_page(frag))); - gnttab_grant_foreign_access_ref(ref, np->xbdev->otherend_id, - mfn, GNTMAP_readonly); + /* Skip unused frames from start of page */ + page += offset >> PAGE_SHIFT; + offset &= ~PAGE_MASK; - tx->gref = np->grant_tx_ref[id] = ref; - tx->offset = frag->page_offset; - tx->size = skb_frag_size(frag); - tx->flags = 0; + while (len > 0) { + unsigned long bytes; + + BUG_ON(offset >= PAGE_SIZE); + + bytes = PAGE_SIZE - offset; + if (bytes > len) + bytes = len; + + tx->flags |= XEN_NETTXF_more_data; + + id = get_id_from_freelist(&np->tx_skb_freelist, + np->tx_skbs); + np->tx_skbs[id].skb = skb_get(skb); + tx = RING_GET_REQUEST(&np->tx, prod++); + tx->id = id; + ref = gnttab_claim_grant_reference(&np->gref_tx_head); + BUG_ON((signed short)ref < 0); + + mfn = pfn_to_mfn(page_to_pfn(page)); + gnttab_grant_foreign_access_ref(ref, + np->xbdev->otherend_id, + mfn, GNTMAP_readonly); + + tx->gref = np->grant_tx_ref[id] = ref; + tx->offset = offset; + tx->size = bytes; + tx->flags = 0; + + offset += bytes; + len -= bytes; + + /* Next frame */ + if (offset == PAGE_SIZE && len) { + BUG_ON(!PageCompound(page)); + page++; + offset = 0; + } + } } np->tx.req_prod_pvt = prod; } +/* + * Count how many ring slots are required to send the frags of this + * skb. Each frag might be a compound page. + */ +static int xennet_count_skb_frag_slots(struct sk_buff *skb) +{ + int i, frags = skb_shinfo(skb)->nr_frags; + int pages = 0; + + for (i = 0; i < frags; i++) { + skb_frag_t *frag = skb_shinfo(skb)->frags + i; + unsigned long size = skb_frag_size(frag); + unsigned long offset = frag->page_offset; + + /* Skip unused frames from start of page */ + offset &= ~PAGE_MASK; + + pages += PFN_UP(offset + size); + } + + return pages; +} + static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev) { unsigned short id; @@ -487,23 +543,23 @@ static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev) grant_ref_t ref; unsigned long mfn; int notify; - int frags = skb_shinfo(skb)->nr_frags; + int slots; unsigned int offset = offset_in_page(data); unsigned int len = skb_headlen(skb); unsigned long flags; - frags += DIV_ROUND_UP(offset + len, PAGE_SIZE); - if (unlikely(frags > MAX_SKB_FRAGS + 1)) { - printk(KERN_ALERT "xennet: skb rides the rocket: %d frags\n", - frags); - dump_stack(); + slots = DIV_ROUND_UP(offset + len, PAGE_SIZE) + + xennet_count_skb_frag_slots(skb); + if (unlikely(slots > MAX_SKB_FRAGS + 1)) { + net_alert_ratelimited( + "xennet: skb rides the rocket: %d slots\n", slots); goto drop; } spin_lock_irqsave(&np->tx_lock, flags); if (unlikely(!netif_carrier_ok(dev) || - (frags > 1 && !xennet_can_sg(dev)) || + (slots > 1 && !xennet_can_sg(dev)) || netif_needs_gso(skb, netif_skb_features(skb)))) { spin_unlock_irqrestore(&np->tx_lock, flags); goto drop; diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 97c440a8cd61..30ae18a03a9c 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -698,13 +698,14 @@ static void pn533_wq_cmd(struct work_struct *work) cmd = list_first_entry(&dev->cmd_queue, struct pn533_cmd, queue); + list_del(&cmd->queue); + mutex_unlock(&dev->cmd_lock); __pn533_send_cmd_frame_async(dev, cmd->out_frame, cmd->in_frame, cmd->in_frame_len, cmd->cmd_complete, cmd->arg, cmd->flags); - list_del(&cmd->queue); kfree(cmd); } @@ -1678,11 +1679,14 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev, static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, u8 *params, int params_len) { - struct pn533_cmd_jump_dep *cmd; struct pn533_cmd_jump_dep_response *resp; struct nfc_target nfc_target; u8 target_gt_len; int rc; + struct pn533_cmd_jump_dep *cmd = (struct pn533_cmd_jump_dep *)arg; + u8 active = cmd->active; + + kfree(arg); if (params_len == -ENOENT) { nfc_dev_dbg(&dev->interface->dev, ""); @@ -1704,7 +1708,6 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, } resp = (struct pn533_cmd_jump_dep_response *) params; - cmd = (struct pn533_cmd_jump_dep *) arg; rc = resp->status & PN533_CMD_RET_MASK; if (rc != PN533_CMD_RET_SUCCESS) { nfc_dev_err(&dev->interface->dev, @@ -1734,7 +1737,7 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, if (rc == 0) rc = nfc_dep_link_is_up(dev->nfc_dev, dev->nfc_dev->targets[0].idx, - !cmd->active, NFC_RF_INITIATOR); + !active, NFC_RF_INITIATOR); return 0; } @@ -1819,12 +1822,8 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, dev->in_maxlen, pn533_in_dep_link_up_complete, cmd, GFP_KERNEL); - if (rc) - goto out; - - -out: - kfree(cmd); + if (rc < 0) + kfree(cmd); return rc; } @@ -2078,8 +2077,12 @@ error: static int pn533_tm_send_complete(struct pn533 *dev, void *arg, u8 *params, int params_len) { + struct sk_buff *skb_out = arg; + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + dev_kfree_skb(skb_out); + if (params_len < 0) { nfc_dev_err(&dev->interface->dev, "Error %d when sending data", @@ -2117,7 +2120,7 @@ static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) rc = pn533_send_cmd_frame_async(dev, out_frame, dev->in_frame, dev->in_maxlen, pn533_tm_send_complete, - NULL, GFP_KERNEL); + skb, GFP_KERNEL); if (rc) { nfc_dev_err(&dev->interface->dev, "Error %d when trying to send data", rc); diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index d96caefd914a..bfa0b220c0b5 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -178,7 +178,7 @@ config PINCTRL_COH901 ports of 8 GPIO pins each. config PINCTRL_SAMSUNG - bool "Samsung pinctrl driver" + bool depends on OF && GPIOLIB select PINMUX select PINCONF @@ -188,27 +188,7 @@ config PINCTRL_EXYNOS4 depends on OF && GPIOLIB select PINCTRL_SAMSUNG -config PINCTRL_MVEBU - bool - depends on ARCH_MVEBU - select PINMUX - select PINCONF - -config PINCTRL_DOVE - bool - select PINCTRL_MVEBU - -config PINCTRL_KIRKWOOD - bool - select PINCTRL_MVEBU - -config PINCTRL_ARMADA_370 - bool - select PINCTRL_MVEBU - -config PINCTRL_ARMADA_XP - bool - select PINCTRL_MVEBU +source "drivers/pinctrl/mvebu/Kconfig" source "drivers/pinctrl/spear/Kconfig" diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index f395ba5cec25..3cb6a0a668a8 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -36,12 +36,8 @@ obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o obj-$(CONFIG_PINCTRL_EXYNOS4) += pinctrl-exynos.o -obj-$(CONFIG_PINCTRL_MVEBU) += pinctrl-mvebu.o -obj-$(CONFIG_PINCTRL_DOVE) += pinctrl-dove.o -obj-$(CONFIG_PINCTRL_KIRKWOOD) += pinctrl-kirkwood.o -obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o -obj-$(CONFIG_PINCTRL_ARMADA_XP) += pinctrl-armada-xp.o obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o +obj-$(CONFIG_PLAT_ORION) += mvebu/ obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 2e39c04fc16b..cec6072cd7c1 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -563,6 +563,8 @@ static int add_setting(struct pinctrl *p, struct pinctrl_map const *map) return -EPROBE_DEFER; } + setting->dev_name = map->dev_name; + switch (map->type) { case PIN_MAP_TYPE_MUX_GROUP: ret = pinmux_map_to_setting(map, setting); diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h index 1f40ff68a8c4..12f5694f3d5d 100644 --- a/drivers/pinctrl/core.h +++ b/drivers/pinctrl/core.h @@ -105,12 +105,14 @@ struct pinctrl_setting_configs { * @type: the type of setting * @pctldev: pin control device handling to be programmed. Not used for * PIN_MAP_TYPE_DUMMY_STATE. + * @dev_name: the name of the device using this state * @data: Data specific to the setting type */ struct pinctrl_setting { struct list_head node; enum pinctrl_map_type type; struct pinctrl_dev *pctldev; + const char *dev_name; union { struct pinctrl_setting_mux mux; struct pinctrl_setting_configs configs; diff --git a/drivers/pinctrl/mvebu/Kconfig b/drivers/pinctrl/mvebu/Kconfig new file mode 100644 index 000000000000..366fa541ee91 --- /dev/null +++ b/drivers/pinctrl/mvebu/Kconfig @@ -0,0 +1,24 @@ +if PLAT_ORION + +config PINCTRL_MVEBU + bool + select PINMUX + select PINCONF + +config PINCTRL_DOVE + bool + select PINCTRL_MVEBU + +config PINCTRL_KIRKWOOD + bool + select PINCTRL_MVEBU + +config PINCTRL_ARMADA_370 + bool + select PINCTRL_MVEBU + +config PINCTRL_ARMADA_XP + bool + select PINCTRL_MVEBU + +endif diff --git a/drivers/pinctrl/mvebu/Makefile b/drivers/pinctrl/mvebu/Makefile new file mode 100644 index 000000000000..37c253297af0 --- /dev/null +++ b/drivers/pinctrl/mvebu/Makefile @@ -0,0 +1,5 @@ +obj-$(CONFIG_PINCTRL_MVEBU) += pinctrl-mvebu.o +obj-$(CONFIG_PINCTRL_DOVE) += pinctrl-dove.o +obj-$(CONFIG_PINCTRL_KIRKWOOD) += pinctrl-kirkwood.o +obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o +obj-$(CONFIG_PINCTRL_ARMADA_XP) += pinctrl-armada-xp.o diff --git a/drivers/pinctrl/pinctrl-armada-370.c b/drivers/pinctrl/mvebu/pinctrl-armada-370.c index c907647de6ad..c907647de6ad 100644 --- a/drivers/pinctrl/pinctrl-armada-370.c +++ b/drivers/pinctrl/mvebu/pinctrl-armada-370.c diff --git a/drivers/pinctrl/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c index 40bd52a46b4e..40bd52a46b4e 100644 --- a/drivers/pinctrl/pinctrl-armada-xp.c +++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c diff --git a/drivers/pinctrl/pinctrl-dove.c b/drivers/pinctrl/mvebu/pinctrl-dove.c index ffe74b27d66d..40c9c3eecd94 100644 --- a/drivers/pinctrl/pinctrl-dove.c +++ b/drivers/pinctrl/mvebu/pinctrl-dove.c @@ -22,22 +22,22 @@ #include "pinctrl-mvebu.h" -#define DOVE_SB_REGS_VIRT_BASE 0xfde00000 -#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200) +#define DOVE_SB_REGS_VIRT_BASE IOMEM(0xfde00000) +#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0200) #define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10) #define DOVE_AU0_AC97_SEL BIT(16) -#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C) +#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE + 0xe802C) #define DOVE_TWSI_ENABLE_OPTION1 BIT(7) -#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030) +#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE + 0xe8030) #define DOVE_TWSI_ENABLE_OPTION2 BIT(20) #define DOVE_TWSI_ENABLE_OPTION3 BIT(21) #define DOVE_TWSI_OPTION3_GPIO BIT(22) -#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034) +#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE + 0xe8034) #define DOVE_SSP_ON_AU1 BIT(0) -#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c) +#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe803c) #define DOVE_AU1_SPDIFO_GPIO_EN BIT(1) #define DOVE_NAND_GPIO_EN BIT(0) -#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400) +#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0400) #define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40) #define DOVE_SPI_GPIO_SEL BIT(5) #define DOVE_UART1_GPIO_SEL BIT(4) @@ -234,6 +234,14 @@ static int dove_audio1_ctrl_set(struct mvebu_mpp_ctrl *ctrl, unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE); unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2); + /* + * clear all audio1 related bits before configure + */ + gcfg2 &= ~DOVE_TWSI_OPTION3_GPIO; + gmpp &= ~DOVE_AU1_SPDIFO_GPIO_EN; + sspc1 &= ~DOVE_SSP_ON_AU1; + mpp4 &= ~DOVE_AU1_GPIO_SEL; + if (config & BIT(0)) gcfg2 |= DOVE_TWSI_OPTION3_GPIO; if (config & BIT(1)) diff --git a/drivers/pinctrl/mvebu/pinctrl-kirkwood.c b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c new file mode 100644 index 000000000000..fa6ce31c94d9 --- /dev/null +++ b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c @@ -0,0 +1,484 @@ +/* + * Marvell Kirkwood pinctrl driver based on mvebu pinctrl core + * + * Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-mvebu.h" + +#define V(f6180, f6190, f6192, f6281, f6282, dx4122) \ + ((f6180 << 0) | (f6190 << 1) | (f6192 << 2) | \ + (f6281 << 3) | (f6282 << 4) | (dx4122 << 5)) + +enum kirkwood_variant { + VARIANT_MV88F6180 = V(1, 0, 0, 0, 0, 0), + VARIANT_MV88F6190 = V(0, 1, 0, 0, 0, 0), + VARIANT_MV88F6192 = V(0, 0, 1, 0, 0, 0), + VARIANT_MV88F6281 = V(0, 0, 0, 1, 0, 0), + VARIANT_MV88F6282 = V(0, 0, 0, 0, 1, 0), + VARIANT_MV98DX4122 = V(0, 0, 0, 0, 0, 1), +}; + +static struct mvebu_mpp_mode mv88f6xxx_mpp_modes[] = { + MPP_MODE(0, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io2", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1, 1))), + MPP_MODE(1, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io3", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "mosi", V(1, 1, 1, 1, 1, 1))), + MPP_MODE(2, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io4", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1, 1))), + MPP_MODE(3, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io5", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1, 1))), + MPP_MODE(4, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io6", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "uart0", "rxd", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0, 0))), + MPP_MODE(5, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io7", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "uart0", "txd", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "ptp", "trig", V(1, 1, 1, 1, 0, 0)), + MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(6, + MPP_VAR_FUNCTION(0x0, "sysrst", "out", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "spi", "mosi", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "ptp", "trig", V(1, 1, 1, 1, 0, 0))), + MPP_MODE(7, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "pex", "rsto", V(1, 1, 1, 1, 0, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "ptp", "trig", V(1, 1, 1, 1, 0, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(8, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "twsi0", "sda", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart1", "rts", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "mii-1", "rxerr", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xc, "ptp", "clk", V(1, 1, 1, 1, 0, 0)), + MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1, 0))), + MPP_MODE(9, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "twsi0", "sck", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart1", "cts", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xc, "ptp", "evreq", V(1, 1, 1, 1, 0, 0)), + MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1, 0))), + MPP_MODE(10, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0X3, "uart0", "txd", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xc, "ptp", "trig", V(1, 1, 1, 1, 0, 0))), + MPP_MODE(11, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart0", "rxd", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "ptp-1", "evreq", V(1, 1, 1, 1, 0, 0)), + MPP_VAR_FUNCTION(0xc, "ptp-2", "trig", V(1, 1, 1, 1, 0, 0)), + MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0, 0)), + MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1, 0))), + MPP_MODE(12, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 0, 1, 0)), + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0, 0)), + MPP_VAR_FUNCTION(0x1, "sdio", "clk", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xa, "audio", "spdifo", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xb, "spi", "mosi", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xd, "twsi1", "sda", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(13, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "sdio", "cmd", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0xa, "audio", "rmclk", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(14, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "sdio", "d0", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x4, "sata1", "prsnt", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xa, "audio", "spdifi", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xb, "audio-1", "sdi", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1, 0))), + MPP_MODE(15, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "sdio", "d1", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "sata0", "act", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "spi", "cs", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(16, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "sdio", "d2", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "sata1", "act", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "extclk", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1, 0))), + MPP_MODE(17, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "sdio", "d3", V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "sata0", "prsnt", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xa, "sata1", "act", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xd, "twsi1", "sck", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(18, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io0", V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "pex", "clkreq", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(19, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "nand", "io1", V(1, 1, 1, 1, 1, 1))), + MPP_MODE(20, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txd0", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d0", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(1, 0, 0, 0, 0, 0))), + MPP_MODE(21, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txd1", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d1", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(22, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txd2", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d2", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(23, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txd3", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d3", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(24, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxd0", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d4", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(25, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxd1", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d5", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(26, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxd2", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d6", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(27, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxd3", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d7", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(28, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "col", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d8", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(29, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txclk", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(1, 0, 0, 0, 0, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d9", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(30, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxctl", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d10", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(31, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxclk", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d11", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(32, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txclko", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d12", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(33, + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txctl", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d13", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(34, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "txen", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d14", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(35, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1, 1)), + MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x3, "ge1", "rxerr", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d15", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(0, 1, 1, 1, 1, 0))), + MPP_MODE(36, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "twsi1", "sda", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(37, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "twsi1", "sck", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(38, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d18", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(39, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d19", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(40, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d20", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(41, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d21", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(42, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d22", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(43, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d23", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(44, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "clk", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(45, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)), + MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "e", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(46, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(47, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(48, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d16", V(0, 0, 0, 0, 1, 0))), + MPP_MODE(49, + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0, 1)), + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 0, 0)), + MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 0, 1, 1, 0)), + MPP_VAR_FUNCTION(0x5, "ptp", "clk", V(0, 0, 0, 1, 0, 0)), + MPP_VAR_FUNCTION(0xa, "pex", "clkreq", V(0, 0, 0, 0, 1, 0)), + MPP_VAR_FUNCTION(0xb, "lcd", "d17", V(0, 0, 0, 0, 1, 0))), +}; + +static struct mvebu_mpp_ctrl mv88f6180_mpp_controls[] = { + MPP_REG_CTRL(0, 29), +}; + +static struct pinctrl_gpio_range mv88f6180_gpio_ranges[] = { + MPP_GPIO_RANGE(0, 0, 0, 30), +}; + +static struct mvebu_mpp_ctrl mv88f619x_mpp_controls[] = { + MPP_REG_CTRL(0, 35), +}; + +static struct pinctrl_gpio_range mv88f619x_gpio_ranges[] = { + MPP_GPIO_RANGE(0, 0, 0, 32), + MPP_GPIO_RANGE(1, 32, 32, 4), +}; + +static struct mvebu_mpp_ctrl mv88f628x_mpp_controls[] = { + MPP_REG_CTRL(0, 49), +}; + +static struct pinctrl_gpio_range mv88f628x_gpio_ranges[] = { + MPP_GPIO_RANGE(0, 0, 0, 32), + MPP_GPIO_RANGE(1, 32, 32, 18), +}; + +static struct mvebu_pinctrl_soc_info mv88f6180_info = { + .variant = VARIANT_MV88F6180, + .controls = mv88f6180_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f6180_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f6180_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f6180_gpio_ranges), +}; + +static struct mvebu_pinctrl_soc_info mv88f6190_info = { + .variant = VARIANT_MV88F6190, + .controls = mv88f619x_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f619x_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges), +}; + +static struct mvebu_pinctrl_soc_info mv88f6192_info = { + .variant = VARIANT_MV88F6192, + .controls = mv88f619x_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f619x_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges), +}; + +static struct mvebu_pinctrl_soc_info mv88f6281_info = { + .variant = VARIANT_MV88F6281, + .controls = mv88f628x_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f628x_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges), +}; + +static struct mvebu_pinctrl_soc_info mv88f6282_info = { + .variant = VARIANT_MV88F6282, + .controls = mv88f628x_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f628x_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges), +}; + +static struct mvebu_pinctrl_soc_info mv98dx4122_info = { + .variant = VARIANT_MV98DX4122, + .controls = mv88f628x_mpp_controls, + .ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls), + .modes = mv88f6xxx_mpp_modes, + .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), + .gpioranges = mv88f628x_gpio_ranges, + .ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges), +}; + +static struct of_device_id kirkwood_pinctrl_of_match[] __devinitdata = { + { .compatible = "marvell,88f6180-pinctrl", .data = &mv88f6180_info }, + { .compatible = "marvell,88f6190-pinctrl", .data = &mv88f6190_info }, + { .compatible = "marvell,88f6192-pinctrl", .data = &mv88f6192_info }, + { .compatible = "marvell,88f6281-pinctrl", .data = &mv88f6281_info }, + { .compatible = "marvell,88f6282-pinctrl", .data = &mv88f6282_info }, + { .compatible = "marvell,98dx4122-pinctrl", .data = &mv98dx4122_info }, + { } +}; + +static int __devinit kirkwood_pinctrl_probe(struct platform_device *pdev) +{ + const struct of_device_id *match = + of_match_device(kirkwood_pinctrl_of_match, &pdev->dev); + pdev->dev.platform_data = match->data; + return mvebu_pinctrl_probe(pdev); +} + +static int __devexit kirkwood_pinctrl_remove(struct platform_device *pdev) +{ + return mvebu_pinctrl_remove(pdev); +} + +static struct platform_driver kirkwood_pinctrl_driver = { + .driver = { + .name = "kirkwood-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(kirkwood_pinctrl_of_match), + }, + .probe = kirkwood_pinctrl_probe, + .remove = __devexit_p(kirkwood_pinctrl_remove), +}; + +module_platform_driver(kirkwood_pinctrl_driver); + +MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>"); +MODULE_DESCRIPTION("Marvell Kirkwood pinctrl driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/pinctrl-mvebu.c b/drivers/pinctrl/mvebu/pinctrl-mvebu.c index 8e6266c6249a..6c44b7e8964c 100644 --- a/drivers/pinctrl/pinctrl-mvebu.c +++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.c @@ -24,7 +24,6 @@ #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include "core.h" #include "pinctrl-mvebu.h" #define MPPS_PER_REG 8 diff --git a/drivers/pinctrl/pinctrl-mvebu.h b/drivers/pinctrl/mvebu/pinctrl-mvebu.h index 90bd3beee860..90bd3beee860 100644 --- a/drivers/pinctrl/pinctrl-mvebu.h +++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.h diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 21362f48d370..19fab68a9fbf 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -40,46 +40,46 @@ static const struct of_device_id exynos_wkup_irq_ids[] = { static void exynos_gpio_irq_unmask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask &= ~(1 << edata->pin); + mask &= ~(1 << irqd->hwirq); writel(mask, d->virt_base + reg_mask); } static void exynos_gpio_irq_mask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned long reg_mask = d->ctrl->geint_mask + bank->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask |= 1 << edata->pin; + mask |= 1 << irqd->hwirq; writel(mask, d->virt_base + reg_mask); } static void exynos_gpio_irq_ack(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - unsigned long reg_pend = d->ctrl->geint_pend + edata->eint_offset; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned long reg_pend = d->ctrl->geint_pend + bank->eint_offset; - writel(1 << edata->pin, d->virt_base + reg_pend); + writel(1 << irqd->hwirq, d->virt_base + reg_pend); } static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) { - struct samsung_pinctrl_drv_data *d = irqd->domain->host_data; + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; struct samsung_pin_ctrl *ctrl = d->ctrl; - struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd); - struct samsung_pin_bank *bank = edata->bank; - unsigned int shift = EXYNOS_EINT_CON_LEN * edata->pin; + unsigned int pin = irqd->hwirq; + unsigned int shift = EXYNOS_EINT_CON_LEN * pin; unsigned int con, trig_type; - unsigned long reg_con = ctrl->geint_con + edata->eint_offset; + unsigned long reg_con = ctrl->geint_con + bank->eint_offset; unsigned int mask; switch (type) { @@ -114,7 +114,7 @@ static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) writel(con, d->virt_base + reg_con); reg_con = bank->pctl_offset; - shift = edata->pin * bank->func_width; + shift = pin * bank->func_width; mask = (1 << bank->func_width) - 1; con = readl(d->virt_base + reg_con); @@ -136,82 +136,23 @@ static struct irq_chip exynos_gpio_irq_chip = { .irq_set_type = exynos_gpio_irq_set_type, }; -/* - * given a controller-local external gpio interrupt number, prepare the handler - * data for it. - */ -static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw, - struct samsung_pinctrl_drv_data *d) -{ - struct samsung_pin_bank *bank = d->ctrl->pin_banks; - struct exynos_geint_data *eint_data; - unsigned int nr_banks = d->ctrl->nr_banks, idx; - unsigned int irq_base = 0, eint_offset = 0; - - if (hw >= d->ctrl->nr_gint) { - dev_err(d->dev, "unsupported ext-gpio interrupt\n"); - return NULL; - } - - for (idx = 0; idx < nr_banks; idx++, bank++) { - if (bank->eint_type != EINT_TYPE_GPIO) - continue; - if ((hw >= irq_base) && (hw < (irq_base + bank->nr_pins))) - break; - irq_base += bank->nr_pins; - eint_offset += 4; - } - - if (idx == nr_banks) { - dev_err(d->dev, "pin bank not found for ext-gpio interrupt\n"); - return NULL; - } - - eint_data = devm_kzalloc(d->dev, sizeof(*eint_data), GFP_KERNEL); - if (!eint_data) { - dev_err(d->dev, "no memory for eint-gpio data\n"); - return NULL; - } - - eint_data->bank = bank; - eint_data->pin = hw - irq_base; - eint_data->eint_offset = eint_offset; - return eint_data; -} - static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { - struct samsung_pinctrl_drv_data *d = h->host_data; - struct exynos_geint_data *eint_data; - - eint_data = exynos_get_eint_data(hw, d); - if (!eint_data) - return -EINVAL; + struct samsung_pin_bank *b = h->host_data; - irq_set_handler_data(virq, eint_data); - irq_set_chip_data(virq, h->host_data); + irq_set_chip_data(virq, b); irq_set_chip_and_handler(virq, &exynos_gpio_irq_chip, handle_level_irq); set_irq_flags(virq, IRQF_VALID); return 0; } -static void exynos_gpio_irq_unmap(struct irq_domain *h, unsigned int virq) -{ - struct samsung_pinctrl_drv_data *d = h->host_data; - struct exynos_geint_data *eint_data; - - eint_data = irq_get_handler_data(virq); - devm_kfree(d->dev, eint_data); -} - /* * irq domain callbacks for external gpio interrupt controller. */ static const struct irq_domain_ops exynos_gpio_irqd_ops = { .map = exynos_gpio_irq_map, - .unmap = exynos_gpio_irq_unmap, .xlate = irq_domain_xlate_twocell, }; @@ -230,7 +171,7 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data) return IRQ_HANDLED; bank += (group - 1); - virq = irq_linear_revmap(d->gpio_irqd, bank->irq_base + pin); + virq = irq_linear_revmap(bank->irq_domain, pin); if (!virq) return IRQ_NONE; generic_handle_irq(virq); @@ -243,8 +184,10 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data) */ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) { + struct samsung_pin_bank *bank; struct device *dev = d->dev; unsigned int ret; + unsigned int i; if (!d->irq) { dev_err(dev, "irq number not available\n"); @@ -258,11 +201,16 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) return -ENXIO; } - d->gpio_irqd = irq_domain_add_linear(dev->of_node, d->ctrl->nr_gint, - &exynos_gpio_irqd_ops, d); - if (!d->gpio_irqd) { - dev_err(dev, "gpio irq domain allocation failed\n"); - return -ENXIO; + bank = d->ctrl->pin_banks; + for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { + if (bank->eint_type != EINT_TYPE_GPIO) + continue; + bank->irq_domain = irq_domain_add_linear(bank->of_node, + bank->nr_pins, &exynos_gpio_irqd_ops, bank); + if (!bank->irq_domain) { + dev_err(dev, "gpio irq domain add failed\n"); + return -ENXIO; + } } return 0; @@ -270,48 +218,46 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) static void exynos_wkup_irq_unmask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2); + struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = b->drvdata; + unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask &= ~(1 << pin); + mask &= ~(1 << irqd->hwirq); writel(mask, d->virt_base + reg_mask); } static void exynos_wkup_irq_mask(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2); + struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = b->drvdata; + unsigned long reg_mask = d->ctrl->weint_mask + b->eint_offset; unsigned long mask; mask = readl(d->virt_base + reg_mask); - mask |= 1 << pin; + mask |= 1 << irqd->hwirq; writel(mask, d->virt_base + reg_mask); } static void exynos_wkup_irq_ack(struct irq_data *irqd) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long pend = d->ctrl->weint_pend + (bank << 2); + struct samsung_pin_bank *b = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = b->drvdata; + unsigned long pend = d->ctrl->weint_pend + b->eint_offset; - writel(1 << pin, d->virt_base + pend); + writel(1 << irqd->hwirq, d->virt_base + pend); } static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type) { - struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd); - unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK; - unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1); - unsigned long reg_con = d->ctrl->weint_con + (bank << 2); + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + struct samsung_pinctrl_drv_data *d = bank->drvdata; + unsigned int pin = irqd->hwirq; + unsigned long reg_con = d->ctrl->weint_con + bank->eint_offset; unsigned long shift = EXYNOS_EINT_CON_LEN * pin; unsigned long con, trig_type; + unsigned int mask; switch (type) { case IRQ_TYPE_EDGE_RISING: @@ -343,6 +289,16 @@ static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type) con &= ~(EXYNOS_EINT_CON_MASK << shift); con |= trig_type << shift; writel(con, d->virt_base + reg_con); + + reg_con = bank->pctl_offset; + shift = pin * bank->func_width; + mask = (1 << bank->func_width) - 1; + + con = readl(d->virt_base + reg_con); + con &= ~(mask << shift); + con |= EXYNOS_EINT_FUNC << shift; + writel(con, d->virt_base + reg_con); + return 0; } @@ -361,6 +317,7 @@ static struct irq_chip exynos_wkup_irq_chip = { static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) { struct exynos_weint_data *eintd = irq_get_handler_data(irq); + struct samsung_pin_bank *bank = eintd->bank; struct irq_chip *chip = irq_get_chip(irq); int eint_irq; @@ -370,20 +327,20 @@ static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc) if (chip->irq_ack) chip->irq_ack(&desc->irq_data); - eint_irq = irq_linear_revmap(eintd->domain, eintd->irq); + eint_irq = irq_linear_revmap(bank->irq_domain, eintd->irq); generic_handle_irq(eint_irq); chip->irq_unmask(&desc->irq_data); chained_irq_exit(chip, desc); } -static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend, - struct irq_domain *domain) +static inline void exynos_irq_demux_eint(unsigned long pend, + struct irq_domain *domain) { unsigned int irq; while (pend) { irq = fls(pend) - 1; - generic_handle_irq(irq_find_mapping(domain, irq_base + irq)); + generic_handle_irq(irq_find_mapping(domain, irq)); pend &= ~(1 << irq); } } @@ -392,18 +349,22 @@ static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend, static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_get_chip(irq); - struct exynos_weint_data *eintd = irq_get_handler_data(irq); - struct samsung_pinctrl_drv_data *d = eintd->domain->host_data; + struct exynos_muxed_weint_data *eintd = irq_get_handler_data(irq); + struct samsung_pinctrl_drv_data *d = eintd->banks[0]->drvdata; + struct samsung_pin_ctrl *ctrl = d->ctrl; unsigned long pend; unsigned long mask; + int i; chained_irq_enter(chip, desc); - pend = readl(d->virt_base + d->ctrl->weint_pend + 0x8); - mask = readl(d->virt_base + d->ctrl->weint_mask + 0x8); - exynos_irq_demux_eint(16, pend & ~mask, eintd->domain); - pend = readl(d->virt_base + d->ctrl->weint_pend + 0xC); - mask = readl(d->virt_base + d->ctrl->weint_mask + 0xC); - exynos_irq_demux_eint(24, pend & ~mask, eintd->domain); + + for (i = 0; i < eintd->nr_banks; ++i) { + struct samsung_pin_bank *b = eintd->banks[i]; + pend = readl(d->virt_base + ctrl->weint_pend + b->eint_offset); + mask = readl(d->virt_base + ctrl->weint_mask + b->eint_offset); + exynos_irq_demux_eint(pend & ~mask, b->irq_domain); + } + chained_irq_exit(chip, desc); } @@ -433,7 +394,11 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) struct device *dev = d->dev; struct device_node *wkup_np = NULL; struct device_node *np; + struct samsung_pin_bank *bank; struct exynos_weint_data *weint_data; + struct exynos_muxed_weint_data *muxed_data; + unsigned int muxed_banks = 0; + unsigned int i; int idx, irq; for_each_child_of_node(dev->of_node, np) { @@ -445,90 +410,124 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) if (!wkup_np) return -ENODEV; - d->wkup_irqd = irq_domain_add_linear(wkup_np, d->ctrl->nr_wint, - &exynos_wkup_irqd_ops, d); - if (!d->wkup_irqd) { - dev_err(dev, "wakeup irq domain allocation failed\n"); - return -ENXIO; - } + bank = d->ctrl->pin_banks; + for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { + if (bank->eint_type != EINT_TYPE_WKUP) + continue; - weint_data = devm_kzalloc(dev, sizeof(*weint_data) * 17, GFP_KERNEL); - if (!weint_data) { - dev_err(dev, "could not allocate memory for weint_data\n"); - return -ENOMEM; - } + bank->irq_domain = irq_domain_add_linear(bank->of_node, + bank->nr_pins, &exynos_wkup_irqd_ops, bank); + if (!bank->irq_domain) { + dev_err(dev, "wkup irq domain add failed\n"); + return -ENXIO; + } - irq = irq_of_parse_and_map(wkup_np, 16); - if (irq) { - weint_data[16].domain = d->wkup_irqd; - irq_set_chained_handler(irq, exynos_irq_demux_eint16_31); - irq_set_handler_data(irq, &weint_data[16]); - } else { - dev_err(dev, "irq number for EINT16-32 not found\n"); - } + if (!of_find_property(bank->of_node, "interrupts", NULL)) { + bank->eint_type = EINT_TYPE_WKUP_MUX; + ++muxed_banks; + continue; + } - for (idx = 0; idx < 16; idx++) { - weint_data[idx].domain = d->wkup_irqd; - weint_data[idx].irq = idx; + weint_data = devm_kzalloc(dev, bank->nr_pins + * sizeof(*weint_data), GFP_KERNEL); + if (!weint_data) { + dev_err(dev, "could not allocate memory for weint_data\n"); + return -ENOMEM; + } - irq = irq_of_parse_and_map(wkup_np, idx); - if (irq) { + for (idx = 0; idx < bank->nr_pins; ++idx) { + irq = irq_of_parse_and_map(bank->of_node, idx); + if (!irq) { + dev_err(dev, "irq number for eint-%s-%d not found\n", + bank->name, idx); + continue; + } + weint_data[idx].irq = idx; + weint_data[idx].bank = bank; irq_set_handler_data(irq, &weint_data[idx]); irq_set_chained_handler(irq, exynos_irq_eint0_15); - } else { - dev_err(dev, "irq number for eint-%x not found\n", idx); } } + + if (!muxed_banks) + return 0; + + irq = irq_of_parse_and_map(wkup_np, 0); + if (!irq) { + dev_err(dev, "irq number for muxed EINTs not found\n"); + return 0; + } + + muxed_data = devm_kzalloc(dev, sizeof(*muxed_data) + + muxed_banks*sizeof(struct samsung_pin_bank *), GFP_KERNEL); + if (!muxed_data) { + dev_err(dev, "could not allocate memory for muxed_data\n"); + return -ENOMEM; + } + + irq_set_chained_handler(irq, exynos_irq_demux_eint16_31); + irq_set_handler_data(irq, muxed_data); + + bank = d->ctrl->pin_banks; + idx = 0; + for (i = 0; i < d->ctrl->nr_banks; ++i, ++bank) { + if (bank->eint_type != EINT_TYPE_WKUP_MUX) + continue; + + muxed_data->banks[idx++] = bank; + } + muxed_data->nr_banks = muxed_banks; + return 0; } /* pin banks of exynos4210 pin-controller 0 */ static struct samsung_pin_bank exynos4210_pin_banks0[] = { - EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_A0, "gpa0"), - EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_A1, "gpa1"), - EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_B, "gpb"), - EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_C0, "gpc0"), - EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_C1, "gpc1"), - EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_D0, "gpd0"), - EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_D1, "gpd1"), - EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_E0, "gpe0"), - EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_E1, "gpe1"), - EXYNOS_PIN_BANK_EINTG(0x120, EXYNOS4210_GPIO_E2, "gpe2"), - EXYNOS_PIN_BANK_EINTG(0x140, EXYNOS4210_GPIO_E3, "gpe3"), - EXYNOS_PIN_BANK_EINTG(0x160, EXYNOS4210_GPIO_E4, "gpe4"), - EXYNOS_PIN_BANK_EINTG(0x180, EXYNOS4210_GPIO_F0, "gpf0"), - EXYNOS_PIN_BANK_EINTG(0x1A0, EXYNOS4210_GPIO_F1, "gpf1"), - EXYNOS_PIN_BANK_EINTG(0x1C0, EXYNOS4210_GPIO_F2, "gpf2"), - EXYNOS_PIN_BANK_EINTG(0x1E0, EXYNOS4210_GPIO_F3, "gpf3"), + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), + EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), + EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c), + EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10), + EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14), + EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18), + EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0", 0x1c), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1", 0x20), + EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2", 0x24), + EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3", 0x28), + EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4", 0x2c), + EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30), + EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34), + EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38), + EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c), }; /* pin banks of exynos4210 pin-controller 1 */ static struct samsung_pin_bank exynos4210_pin_banks1[] = { - EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_J0, "gpj0"), - EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_J1, "gpj1"), - EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_K0, "gpk0"), - EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_K1, "gpk1"), - EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_K2, "gpk2"), - EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_K3, "gpk3"), - EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_L0, "gpl0"), - EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_L1, "gpl1"), - EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_L2, "gpl2"), - EXYNOS_PIN_BANK_EINTN(0x120, EXYNOS4210_GPIO_Y0, "gpy0"), - EXYNOS_PIN_BANK_EINTN(0x140, EXYNOS4210_GPIO_Y1, "gpy1"), - EXYNOS_PIN_BANK_EINTN(0x160, EXYNOS4210_GPIO_Y2, "gpy2"), - EXYNOS_PIN_BANK_EINTN(0x180, EXYNOS4210_GPIO_Y3, "gpy3"), - EXYNOS_PIN_BANK_EINTN(0x1A0, EXYNOS4210_GPIO_Y4, "gpy4"), - EXYNOS_PIN_BANK_EINTN(0x1C0, EXYNOS4210_GPIO_Y5, "gpy5"), - EXYNOS_PIN_BANK_EINTN(0x1E0, EXYNOS4210_GPIO_Y6, "gpy6"), - EXYNOS_PIN_BANK_EINTN(0xC00, EXYNOS4210_GPIO_X0, "gpx0"), - EXYNOS_PIN_BANK_EINTN(0xC20, EXYNOS4210_GPIO_X1, "gpx1"), - EXYNOS_PIN_BANK_EINTN(0xC40, EXYNOS4210_GPIO_X2, "gpx2"), - EXYNOS_PIN_BANK_EINTN(0xC60, EXYNOS4210_GPIO_X3, "gpx3"), + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0", 0x00), + EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1", 0x04), + EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08), + EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c), + EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10), + EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14), + EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0", 0x18), + EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1", 0x1c), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20), + EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"), + EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"), + EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"), + EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"), + EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"), + EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"), + EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"), + EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), + EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04), + EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08), + EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c), }; /* pin banks of exynos4210 pin-controller 2 */ static struct samsung_pin_bank exynos4210_pin_banks2[] = { - EXYNOS_PIN_BANK_EINTN(0x000, EXYNOS4210_GPIO_Z, "gpz"), + EXYNOS_PIN_BANK_EINTN(7, 0x000, "gpz"), }; /* @@ -540,9 +539,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { /* pin-controller instance 0 data */ .pin_banks = exynos4210_pin_banks0, .nr_banks = ARRAY_SIZE(exynos4210_pin_banks0), - .base = EXYNOS4210_GPIO_A0_START, - .nr_pins = EXYNOS4210_GPIOA_NR_PINS, - .nr_gint = EXYNOS4210_GPIOA_NR_GINT, .geint_con = EXYNOS_GPIO_ECON_OFFSET, .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, @@ -553,10 +549,6 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { /* pin-controller instance 1 data */ .pin_banks = exynos4210_pin_banks1, .nr_banks = ARRAY_SIZE(exynos4210_pin_banks1), - .base = EXYNOS4210_GPIOA_NR_PINS, - .nr_pins = EXYNOS4210_GPIOB_NR_PINS, - .nr_gint = EXYNOS4210_GPIOB_NR_GINT, - .nr_wint = 32, .geint_con = EXYNOS_GPIO_ECON_OFFSET, .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, @@ -571,9 +563,116 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { /* pin-controller instance 2 data */ .pin_banks = exynos4210_pin_banks2, .nr_banks = ARRAY_SIZE(exynos4210_pin_banks2), - .base = EXYNOS4210_GPIOA_NR_PINS + - EXYNOS4210_GPIOB_NR_PINS, - .nr_pins = EXYNOS4210_GPIOC_NR_PINS, .label = "exynos4210-gpio-ctrl2", }, }; + +/* pin banks of exynos4x12 pin-controller 0 */ +static struct samsung_pin_bank exynos4x12_pin_banks0[] = { + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), + EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04), + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08), + EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c), + EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10), + EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14), + EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18), + EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30), + EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34), + EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38), + EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c), + EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpj0", 0x40), + EXYNOS_PIN_BANK_EINTG(5, 0x260, "gpj1", 0x44), +}; + +/* pin banks of exynos4x12 pin-controller 1 */ +static struct samsung_pin_bank exynos4x12_pin_banks1[] = { + EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08), + EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c), + EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10), + EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14), + EXYNOS_PIN_BANK_EINTG(7, 0x0C0, "gpl0", 0x18), + EXYNOS_PIN_BANK_EINTG(2, 0x0E0, "gpl1", 0x1c), + EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20), + EXYNOS_PIN_BANK_EINTG(8, 0x260, "gpm0", 0x24), + EXYNOS_PIN_BANK_EINTG(7, 0x280, "gpm1", 0x28), + EXYNOS_PIN_BANK_EINTG(5, 0x2A0, "gpm2", 0x2c), + EXYNOS_PIN_BANK_EINTG(8, 0x2C0, "gpm3", 0x30), + EXYNOS_PIN_BANK_EINTG(8, 0x2E0, "gpm4", 0x34), + EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"), + EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"), + EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"), + EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"), + EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"), + EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"), + EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"), + EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00), + EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04), + EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08), + EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c), +}; + +/* pin banks of exynos4x12 pin-controller 2 */ +static struct samsung_pin_bank exynos4x12_pin_banks2[] = { + EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00), +}; + +/* pin banks of exynos4x12 pin-controller 3 */ +static struct samsung_pin_bank exynos4x12_pin_banks3[] = { + EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00), + EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04), + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpv2", 0x08), + EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv3", 0x0c), + EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpv4", 0x10), +}; + +/* + * Samsung pinctrl driver data for Exynos4x12 SoC. Exynos4x12 SoC includes + * four gpio/pin-mux/pinconfig controllers. + */ +struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { + { + /* pin-controller instance 0 data */ + .pin_banks = exynos4x12_pin_banks0, + .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks0), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .label = "exynos4x12-gpio-ctrl0", + }, { + /* pin-controller instance 1 data */ + .pin_banks = exynos4x12_pin_banks1, + .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks1), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .weint_con = EXYNOS_WKUP_ECON_OFFSET, + .weint_mask = EXYNOS_WKUP_EMASK_OFFSET, + .weint_pend = EXYNOS_WKUP_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .eint_wkup_init = exynos_eint_wkup_init, + .label = "exynos4x12-gpio-ctrl1", + }, { + /* pin-controller instance 2 data */ + .pin_banks = exynos4x12_pin_banks2, + .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks2), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .label = "exynos4x12-gpio-ctrl2", + }, { + /* pin-controller instance 3 data */ + .pin_banks = exynos4x12_pin_banks3, + .nr_banks = ARRAY_SIZE(exynos4x12_pin_banks3), + .geint_con = EXYNOS_GPIO_ECON_OFFSET, + .geint_mask = EXYNOS_GPIO_EMASK_OFFSET, + .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, + .svc = EXYNOS_SVC_OFFSET, + .eint_gpio_init = exynos_eint_gpio_init, + .label = "exynos4x12-gpio-ctrl3", + }, +}; diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index 31d0a06174e4..0a708890d8b4 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -17,125 +17,6 @@ * (at your option) any later version. */ -#define EXYNOS_GPIO_START(__gpio) ((__gpio##_START) + (__gpio##_NR)) - -#define EXYNOS4210_GPIO_A0_NR (8) -#define EXYNOS4210_GPIO_A1_NR (6) -#define EXYNOS4210_GPIO_B_NR (8) -#define EXYNOS4210_GPIO_C0_NR (5) -#define EXYNOS4210_GPIO_C1_NR (5) -#define EXYNOS4210_GPIO_D0_NR (4) -#define EXYNOS4210_GPIO_D1_NR (4) -#define EXYNOS4210_GPIO_E0_NR (5) -#define EXYNOS4210_GPIO_E1_NR (8) -#define EXYNOS4210_GPIO_E2_NR (6) -#define EXYNOS4210_GPIO_E3_NR (8) -#define EXYNOS4210_GPIO_E4_NR (8) -#define EXYNOS4210_GPIO_F0_NR (8) -#define EXYNOS4210_GPIO_F1_NR (8) -#define EXYNOS4210_GPIO_F2_NR (8) -#define EXYNOS4210_GPIO_F3_NR (6) -#define EXYNOS4210_GPIO_J0_NR (8) -#define EXYNOS4210_GPIO_J1_NR (5) -#define EXYNOS4210_GPIO_K0_NR (7) -#define EXYNOS4210_GPIO_K1_NR (7) -#define EXYNOS4210_GPIO_K2_NR (7) -#define EXYNOS4210_GPIO_K3_NR (7) -#define EXYNOS4210_GPIO_L0_NR (8) -#define EXYNOS4210_GPIO_L1_NR (3) -#define EXYNOS4210_GPIO_L2_NR (8) -#define EXYNOS4210_GPIO_Y0_NR (6) -#define EXYNOS4210_GPIO_Y1_NR (4) -#define EXYNOS4210_GPIO_Y2_NR (6) -#define EXYNOS4210_GPIO_Y3_NR (8) -#define EXYNOS4210_GPIO_Y4_NR (8) -#define EXYNOS4210_GPIO_Y5_NR (8) -#define EXYNOS4210_GPIO_Y6_NR (8) -#define EXYNOS4210_GPIO_X0_NR (8) -#define EXYNOS4210_GPIO_X1_NR (8) -#define EXYNOS4210_GPIO_X2_NR (8) -#define EXYNOS4210_GPIO_X3_NR (8) -#define EXYNOS4210_GPIO_Z_NR (7) - -enum exynos4210_gpio_xa_start { - EXYNOS4210_GPIO_A0_START = 0, - EXYNOS4210_GPIO_A1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A0), - EXYNOS4210_GPIO_B_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A1), - EXYNOS4210_GPIO_C0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_B), - EXYNOS4210_GPIO_C1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C0), - EXYNOS4210_GPIO_D0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C1), - EXYNOS4210_GPIO_D1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D0), - EXYNOS4210_GPIO_E0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D1), - EXYNOS4210_GPIO_E1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E0), - EXYNOS4210_GPIO_E2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E1), - EXYNOS4210_GPIO_E3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E2), - EXYNOS4210_GPIO_E4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E3), - EXYNOS4210_GPIO_F0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E4), - EXYNOS4210_GPIO_F1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F0), - EXYNOS4210_GPIO_F2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F1), - EXYNOS4210_GPIO_F3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F2), -}; - -enum exynos4210_gpio_xb_start { - EXYNOS4210_GPIO_J0_START = 0, - EXYNOS4210_GPIO_J1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J0), - EXYNOS4210_GPIO_K0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J1), - EXYNOS4210_GPIO_K1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K0), - EXYNOS4210_GPIO_K2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K1), - EXYNOS4210_GPIO_K3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K2), - EXYNOS4210_GPIO_L0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K3), - EXYNOS4210_GPIO_L1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L0), - EXYNOS4210_GPIO_L2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L1), - EXYNOS4210_GPIO_Y0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2), - EXYNOS4210_GPIO_Y1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y0), - EXYNOS4210_GPIO_Y2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y1), - EXYNOS4210_GPIO_Y3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y2), - EXYNOS4210_GPIO_Y4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y3), - EXYNOS4210_GPIO_Y5_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y4), - EXYNOS4210_GPIO_Y6_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y5), - EXYNOS4210_GPIO_X0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y6), - EXYNOS4210_GPIO_X1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X0), - EXYNOS4210_GPIO_X2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X1), - EXYNOS4210_GPIO_X3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X2), -}; - -enum exynos4210_gpio_xc_start { - EXYNOS4210_GPIO_Z_START = 0, -}; - -#define EXYNOS4210_GPIO_A0_IRQ EXYNOS4210_GPIO_A0_START -#define EXYNOS4210_GPIO_A1_IRQ EXYNOS4210_GPIO_A1_START -#define EXYNOS4210_GPIO_B_IRQ EXYNOS4210_GPIO_B_START -#define EXYNOS4210_GPIO_C0_IRQ EXYNOS4210_GPIO_C0_START -#define EXYNOS4210_GPIO_C1_IRQ EXYNOS4210_GPIO_C1_START -#define EXYNOS4210_GPIO_D0_IRQ EXYNOS4210_GPIO_D0_START -#define EXYNOS4210_GPIO_D1_IRQ EXYNOS4210_GPIO_D1_START -#define EXYNOS4210_GPIO_E0_IRQ EXYNOS4210_GPIO_E0_START -#define EXYNOS4210_GPIO_E1_IRQ EXYNOS4210_GPIO_E1_START -#define EXYNOS4210_GPIO_E2_IRQ EXYNOS4210_GPIO_E2_START -#define EXYNOS4210_GPIO_E3_IRQ EXYNOS4210_GPIO_E3_START -#define EXYNOS4210_GPIO_E4_IRQ EXYNOS4210_GPIO_E4_START -#define EXYNOS4210_GPIO_F0_IRQ EXYNOS4210_GPIO_F0_START -#define EXYNOS4210_GPIO_F1_IRQ EXYNOS4210_GPIO_F1_START -#define EXYNOS4210_GPIO_F2_IRQ EXYNOS4210_GPIO_F2_START -#define EXYNOS4210_GPIO_F3_IRQ EXYNOS4210_GPIO_F3_START -#define EXYNOS4210_GPIO_J0_IRQ EXYNOS4210_GPIO_J0_START -#define EXYNOS4210_GPIO_J1_IRQ EXYNOS4210_GPIO_J1_START -#define EXYNOS4210_GPIO_K0_IRQ EXYNOS4210_GPIO_K0_START -#define EXYNOS4210_GPIO_K1_IRQ EXYNOS4210_GPIO_K1_START -#define EXYNOS4210_GPIO_K2_IRQ EXYNOS4210_GPIO_K2_START -#define EXYNOS4210_GPIO_K3_IRQ EXYNOS4210_GPIO_K3_START -#define EXYNOS4210_GPIO_L0_IRQ EXYNOS4210_GPIO_L0_START -#define EXYNOS4210_GPIO_L1_IRQ EXYNOS4210_GPIO_L1_START -#define EXYNOS4210_GPIO_L2_IRQ EXYNOS4210_GPIO_L2_START -#define EXYNOS4210_GPIO_Z_IRQ EXYNOS4210_GPIO_Z_START - -#define EXYNOS4210_GPIOA_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3) -#define EXYNOS4210_GPIOA_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3) -#define EXYNOS4210_GPIOB_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_X3) -#define EXYNOS4210_GPIOB_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2) -#define EXYNOS4210_GPIOC_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_Z) - /* External GPIO and wakeup interrupt related definitions */ #define EXYNOS_GPIO_ECON_OFFSET 0x700 #define EXYNOS_GPIO_EMASK_OFFSET 0x900 @@ -165,11 +46,10 @@ enum exynos4210_gpio_xc_start { #define EXYNOS_EINT_MAX_PER_BANK 8 #define EXYNOS_EINT_NR_WKUP_EINT -#define EXYNOS_PIN_BANK_EINTN(reg, __gpio, id) \ +#define EXYNOS_PIN_BANK_EINTN(pins, reg, id) \ { \ .pctl_offset = reg, \ - .pin_base = (__gpio##_START), \ - .nr_pins = (__gpio##_NR), \ + .nr_pins = pins, \ .func_width = 4, \ .pud_width = 2, \ .drv_width = 2, \ @@ -179,40 +59,50 @@ enum exynos4210_gpio_xc_start { .name = id \ } -#define EXYNOS_PIN_BANK_EINTG(reg, __gpio, id) \ +#define EXYNOS_PIN_BANK_EINTG(pins, reg, id, offs) \ { \ .pctl_offset = reg, \ - .pin_base = (__gpio##_START), \ - .nr_pins = (__gpio##_NR), \ + .nr_pins = pins, \ .func_width = 4, \ .pud_width = 2, \ .drv_width = 2, \ .conpdn_width = 2, \ .pudpdn_width = 2, \ .eint_type = EINT_TYPE_GPIO, \ - .irq_base = (__gpio##_IRQ), \ + .eint_offset = offs, \ .name = id \ } -/** - * struct exynos_geint_data: gpio eint specific data for irq_chip callbacks. - * @bank: pin bank from which this gpio interrupt originates. - * @pin: pin number within the bank. - * @eint_offset: offset to be added to the con/pend/mask register bank base. - */ -struct exynos_geint_data { - struct samsung_pin_bank *bank; - u32 pin; - u32 eint_offset; -}; +#define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs) \ + { \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .func_width = 4, \ + .pud_width = 2, \ + .drv_width = 2, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_offset = offs, \ + .name = id \ + } /** * struct exynos_weint_data: irq specific data for all the wakeup interrupts * generated by the external wakeup interrupt controller. - * @domain: irq domain representing the external wakeup interrupts * @irq: interrupt number within the domain. + * @bank: bank responsible for this interrupt */ struct exynos_weint_data { - struct irq_domain *domain; - u32 irq; + unsigned int irq; + struct samsung_pin_bank *bank; +}; + +/** + * struct exynos_muxed_weint_data: irq specific data for muxed wakeup interrupts + * generated by the external wakeup interrupt controller. + * @nr_banks: count of banks being part of the mux + * @banks: array of banks being part of the mux + */ +struct exynos_muxed_weint_data { + unsigned int nr_banks; + struct samsung_pin_bank *banks[]; }; diff --git a/drivers/pinctrl/pinctrl-kirkwood.c b/drivers/pinctrl/pinctrl-kirkwood.c deleted file mode 100644 index 9a74ef674a0e..000000000000 --- a/drivers/pinctrl/pinctrl-kirkwood.c +++ /dev/null @@ -1,472 +0,0 @@ -/* - * Marvell Kirkwood pinctrl driver based on mvebu pinctrl core - * - * Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/err.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/pinctrl/pinctrl.h> - -#include "pinctrl-mvebu.h" - -#define V(f6180, f6190, f6192, f6281, f6282) \ - ((f6180 << 0) | (f6190 << 1) | (f6192 << 2) | \ - (f6281 << 3) | (f6282 << 4)) - -enum kirkwood_variant { - VARIANT_MV88F6180 = V(1, 0, 0, 0, 0), - VARIANT_MV88F6190 = V(0, 1, 0, 0, 0), - VARIANT_MV88F6192 = V(0, 0, 1, 0, 0), - VARIANT_MV88F6281 = V(0, 0, 0, 1, 0), - VARIANT_MV88F6282 = V(0, 0, 0, 0, 1), -}; - -static struct mvebu_mpp_mode mv88f6xxx_mpp_modes[] = { - MPP_MODE(0, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io2", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1))), - MPP_MODE(1, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io3", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "spi", "mosi", V(1, 1, 1, 1, 1))), - MPP_MODE(2, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io4", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1))), - MPP_MODE(3, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io5", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1))), - MPP_MODE(4, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io6", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "uart0", "rxd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0))), - MPP_MODE(5, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io7", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "uart0", "txd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "ptp", "trig", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1))), - MPP_MODE(6, - MPP_VAR_FUNCTION(0x0, "sysrst", "out", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "spi", "mosi", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "ptp", "trig", V(1, 1, 1, 1, 0))), - MPP_MODE(7, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "pex", "rsto", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ptp", "trig", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1))), - MPP_MODE(8, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "twsi0", "sda", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "uart1", "rts", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "mii-1", "rxerr", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xc, "ptp", "clk", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1))), - MPP_MODE(9, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "twsi0", "sck", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "uart1", "cts", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xc, "ptp", "evreq", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1))), - MPP_MODE(10, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0X3, "uart0", "txd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xc, "ptp", "trig", V(1, 1, 1, 1, 0))), - MPP_MODE(11, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "uart0", "rxd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "ptp-1", "evreq", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0xc, "ptp-2", "trig", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0)), - MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1))), - MPP_MODE(12, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 0, 1)), - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0)), - MPP_VAR_FUNCTION(0x1, "sdio", "clk", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xa, "audio", "spdifo", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xb, "spi", "mosi", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xd, "twsi1", "sda", V(0, 0, 0, 0, 1))), - MPP_MODE(13, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "sdio", "cmd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xa, "audio", "rmclk", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1))), - MPP_MODE(14, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "sdio", "d0", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "sata1", "prsnt", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xa, "audio", "spdifi", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xb, "audio-1", "sdi", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1))), - MPP_MODE(15, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "sdio", "d1", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "sata0", "act", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "spi", "cs", V(0, 0, 0, 0, 1))), - MPP_MODE(16, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "sdio", "d2", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "sata1", "act", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "extclk", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1))), - MPP_MODE(17, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "sdio", "d3", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "sata0", "prsnt", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xa, "sata1", "act", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xd, "twsi1", "sck", V(0, 0, 0, 0, 1))), - MPP_MODE(18, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io0", V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "pex", "clkreq", V(0, 0, 0, 0, 1))), - MPP_MODE(19, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "nand", "io1", V(1, 1, 1, 1, 1))), - MPP_MODE(20, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txd0", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d0", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(1, 0, 0, 0, 0))), - MPP_MODE(21, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txd1", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d1", V(0, 0, 0, 0, 1))), - MPP_MODE(22, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txd2", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d2", V(0, 0, 0, 0, 1))), - MPP_MODE(23, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txd3", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d3", V(0, 0, 0, 0, 1))), - MPP_MODE(24, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "rxd0", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d4", V(0, 0, 0, 0, 1))), - MPP_MODE(25, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "rxd1", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d5", V(0, 0, 0, 0, 1))), - MPP_MODE(26, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "rxd2", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d6", V(0, 0, 0, 0, 1))), - MPP_MODE(27, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "rxd3", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d7", V(0, 0, 0, 0, 1))), - MPP_MODE(28, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "col", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d8", V(0, 0, 0, 0, 1))), - MPP_MODE(29, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txclk", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(1, 0, 0, 0, 0)), - MPP_VAR_FUNCTION(0xb, "lcd", "d9", V(0, 0, 0, 0, 1))), - MPP_MODE(30, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "rxctl", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d10", V(0, 0, 0, 0, 1))), - MPP_MODE(31, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "rxclk", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d11", V(0, 0, 0, 0, 1))), - MPP_MODE(32, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txclko", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d12", V(0, 0, 0, 0, 1))), - MPP_MODE(33, - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txctl", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d13", V(0, 0, 0, 0, 1))), - MPP_MODE(34, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "txen", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d14", V(0, 0, 0, 0, 1))), - MPP_MODE(35, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1)), - MPP_VAR_FUNCTION(0x3, "ge1", "rxerr", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d15", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(0, 1, 1, 1, 1))), - MPP_MODE(36, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "twsi1", "sda", V(0, 0, 0, 0, 1))), - MPP_MODE(37, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "twsi1", "sck", V(0, 0, 0, 0, 1))), - MPP_MODE(38, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d18", V(0, 0, 0, 0, 1))), - MPP_MODE(39, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d19", V(0, 0, 0, 0, 1))), - MPP_MODE(40, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d20", V(0, 0, 0, 0, 1))), - MPP_MODE(41, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d21", V(0, 0, 0, 0, 1))), - MPP_MODE(42, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d22", V(0, 0, 0, 0, 1))), - MPP_MODE(43, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d23", V(0, 0, 0, 0, 1))), - MPP_MODE(44, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "clk", V(0, 0, 0, 0, 1))), - MPP_MODE(45, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "e", V(0, 0, 0, 0, 1))), - MPP_MODE(46, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1))), - MPP_MODE(47, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1))), - MPP_MODE(48, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d16", V(0, 0, 0, 0, 1))), - MPP_MODE(49, - MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0)), - MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 0)), - MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 0, 1, 1)), - MPP_VAR_FUNCTION(0x5, "ptp", "clk", V(0, 0, 0, 1, 0)), - MPP_VAR_FUNCTION(0xa, "pex", "clkreq", V(0, 0, 0, 0, 1)), - MPP_VAR_FUNCTION(0xb, "lcd", "d17", V(0, 0, 0, 0, 1))), -}; - -static struct mvebu_mpp_ctrl mv88f6180_mpp_controls[] = { - MPP_REG_CTRL(0, 29), -}; - -static struct pinctrl_gpio_range mv88f6180_gpio_ranges[] = { - MPP_GPIO_RANGE(0, 0, 0, 30), -}; - -static struct mvebu_mpp_ctrl mv88f619x_mpp_controls[] = { - MPP_REG_CTRL(0, 35), -}; - -static struct pinctrl_gpio_range mv88f619x_gpio_ranges[] = { - MPP_GPIO_RANGE(0, 0, 0, 32), - MPP_GPIO_RANGE(1, 32, 32, 4), -}; - -static struct mvebu_mpp_ctrl mv88f628x_mpp_controls[] = { - MPP_REG_CTRL(0, 49), -}; - -static struct pinctrl_gpio_range mv88f628x_gpio_ranges[] = { - MPP_GPIO_RANGE(0, 0, 0, 32), - MPP_GPIO_RANGE(1, 32, 32, 18), -}; - -static struct mvebu_pinctrl_soc_info mv88f6180_info = { - .variant = VARIANT_MV88F6180, - .controls = mv88f6180_mpp_controls, - .ncontrols = ARRAY_SIZE(mv88f6180_mpp_controls), - .modes = mv88f6xxx_mpp_modes, - .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), - .gpioranges = mv88f6180_gpio_ranges, - .ngpioranges = ARRAY_SIZE(mv88f6180_gpio_ranges), -}; - -static struct mvebu_pinctrl_soc_info mv88f6190_info = { - .variant = VARIANT_MV88F6190, - .controls = mv88f619x_mpp_controls, - .ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls), - .modes = mv88f6xxx_mpp_modes, - .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), - .gpioranges = mv88f619x_gpio_ranges, - .ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges), -}; - -static struct mvebu_pinctrl_soc_info mv88f6192_info = { - .variant = VARIANT_MV88F6192, - .controls = mv88f619x_mpp_controls, - .ncontrols = ARRAY_SIZE(mv88f619x_mpp_controls), - .modes = mv88f6xxx_mpp_modes, - .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), - .gpioranges = mv88f619x_gpio_ranges, - .ngpioranges = ARRAY_SIZE(mv88f619x_gpio_ranges), -}; - -static struct mvebu_pinctrl_soc_info mv88f6281_info = { - .variant = VARIANT_MV88F6281, - .controls = mv88f628x_mpp_controls, - .ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls), - .modes = mv88f6xxx_mpp_modes, - .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), - .gpioranges = mv88f628x_gpio_ranges, - .ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges), -}; - -static struct mvebu_pinctrl_soc_info mv88f6282_info = { - .variant = VARIANT_MV88F6282, - .controls = mv88f628x_mpp_controls, - .ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls), - .modes = mv88f6xxx_mpp_modes, - .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes), - .gpioranges = mv88f628x_gpio_ranges, - .ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges), -}; - -static struct of_device_id kirkwood_pinctrl_of_match[] __devinitdata = { - { .compatible = "marvell,88f6180-pinctrl", .data = &mv88f6180_info }, - { .compatible = "marvell,88f6190-pinctrl", .data = &mv88f6190_info }, - { .compatible = "marvell,88f6192-pinctrl", .data = &mv88f6192_info }, - { .compatible = "marvell,88f6281-pinctrl", .data = &mv88f6281_info }, - { .compatible = "marvell,88f6282-pinctrl", .data = &mv88f6282_info }, - { } -}; - -static int __devinit kirkwood_pinctrl_probe(struct platform_device *pdev) -{ - const struct of_device_id *match = - of_match_device(kirkwood_pinctrl_of_match, &pdev->dev); - pdev->dev.platform_data = match->data; - return mvebu_pinctrl_probe(pdev); -} - -static int __devexit kirkwood_pinctrl_remove(struct platform_device *pdev) -{ - return mvebu_pinctrl_remove(pdev); -} - -static struct platform_driver kirkwood_pinctrl_driver = { - .driver = { - .name = "kirkwood-pinctrl", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(kirkwood_pinctrl_of_match), - }, - .probe = kirkwood_pinctrl_probe, - .remove = __devexit_p(kirkwood_pinctrl_remove), -}; - -module_platform_driver(kirkwood_pinctrl_driver); - -MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>"); -MODULE_DESCRIPTION("Marvell Kirkwood pinctrl driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 861cd5f04d5e..81c9896d4f64 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -26,6 +26,7 @@ #include <linux/slab.h> #include <linux/err.h> #include <linux/gpio.h> +#include <linux/irqdomain.h> #include "core.h" #include "pinctrl-samsung.h" @@ -46,6 +47,13 @@ struct pin_config { { "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN }, }; +static unsigned int pin_base = 0; + +static inline struct samsung_pin_bank *gc_to_pin_bank(struct gpio_chip *gc) +{ + return container_of(gc, struct samsung_pin_bank, gpio_chip); +} + /* check if the selector is a valid pin group selector */ static int samsung_get_group_count(struct pinctrl_dev *pctldev) { @@ -250,14 +258,12 @@ static int samsung_pinmux_get_groups(struct pinctrl_dev *pctldev, * given a pin number that is local to a pin controller, find out the pin bank * and the register base of the pin bank. */ -static void pin_to_reg_bank(struct gpio_chip *gc, unsigned pin, - void __iomem **reg, u32 *offset, +static void pin_to_reg_bank(struct samsung_pinctrl_drv_data *drvdata, + unsigned pin, void __iomem **reg, u32 *offset, struct samsung_pin_bank **bank) { - struct samsung_pinctrl_drv_data *drvdata; struct samsung_pin_bank *b; - drvdata = dev_get_drvdata(gc->dev); b = drvdata->ctrl->pin_banks; while ((pin >= b->pin_base) && @@ -292,7 +298,7 @@ static void samsung_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector, * pin function number in the config register. */ for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++) { - pin_to_reg_bank(drvdata->gc, pins[cnt] - drvdata->ctrl->base, + pin_to_reg_bank(drvdata, pins[cnt] - drvdata->ctrl->base, ®, &pin_offset, &bank); mask = (1 << bank->func_width) - 1; shift = pin_offset * bank->func_width; @@ -329,10 +335,16 @@ static int samsung_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range, unsigned offset, bool input) { struct samsung_pin_bank *bank; + struct samsung_pinctrl_drv_data *drvdata; void __iomem *reg; u32 data, pin_offset, mask, shift; - pin_to_reg_bank(range->gc, offset, ®, &pin_offset, &bank); + bank = gc_to_pin_bank(range->gc); + drvdata = pinctrl_dev_get_drvdata(pctldev); + + pin_offset = offset - bank->pin_base; + reg = drvdata->virt_base + bank->pctl_offset; + mask = (1 << bank->func_width) - 1; shift = pin_offset * bank->func_width; @@ -366,7 +378,7 @@ static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin, u32 cfg_value, cfg_reg; drvdata = pinctrl_dev_get_drvdata(pctldev); - pin_to_reg_bank(drvdata->gc, pin - drvdata->ctrl->base, ®_base, + pin_to_reg_bank(drvdata, pin - drvdata->ctrl->base, ®_base, &pin_offset, &bank); switch (cfg_type) { @@ -391,6 +403,9 @@ static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin, return -EINVAL; } + if (!width) + return -EINVAL; + mask = (1 << width) - 1; shift = pin_offset * width; data = readl(reg_base + cfg_reg); @@ -463,14 +478,16 @@ static struct pinconf_ops samsung_pinconf_ops = { /* gpiolib gpio_set callback function */ static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value) { + struct samsung_pin_bank *bank = gc_to_pin_bank(gc); void __iomem *reg; - u32 pin_offset, data; + u32 data; + + reg = bank->drvdata->virt_base + bank->pctl_offset; - pin_to_reg_bank(gc, offset, ®, &pin_offset, NULL); data = readl(reg + DAT_REG); - data &= ~(1 << pin_offset); + data &= ~(1 << offset); if (value) - data |= 1 << pin_offset; + data |= 1 << offset; writel(data, reg + DAT_REG); } @@ -478,11 +495,13 @@ static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value) static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset) { void __iomem *reg; - u32 pin_offset, data; + u32 data; + struct samsung_pin_bank *bank = gc_to_pin_bank(gc); + + reg = bank->drvdata->virt_base + bank->pctl_offset; - pin_to_reg_bank(gc, offset, ®, &pin_offset, NULL); data = readl(reg + DAT_REG); - data >>= pin_offset; + data >>= offset; data &= 1; return data; } @@ -510,6 +529,23 @@ static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset, } /* + * gpiolib gpio_to_irq callback function. Creates a mapping between a GPIO pin + * and a virtual IRQ, if not already present. + */ +static int samsung_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct samsung_pin_bank *bank = gc_to_pin_bank(gc); + unsigned int virq; + + if (!bank->irq_domain) + return -ENXIO; + + virq = irq_create_mapping(bank->irq_domain, offset); + + return (virq) ? : -ENXIO; +} + +/* * Parse the pin names listed in the 'samsung,pins' property and convert it * into a list of gpio numbers are create a pin group from it. */ @@ -597,7 +633,7 @@ static int __devinit samsung_pinctrl_parse_dt(struct platform_device *pdev, */ for_each_child_of_node(dev_np, cfg_np) { u32 function; - if (of_find_property(cfg_np, "interrupt-controller", NULL)) + if (!of_find_property(cfg_np, "samsung,pins", NULL)) continue; ret = samsung_pinctrl_parse_dt_pins(pdev, cfg_np, @@ -712,12 +748,16 @@ static int __devinit samsung_pinctrl_register(struct platform_device *pdev, return -EINVAL; } - drvdata->grange.name = "samsung-pctrl-gpio-range"; - drvdata->grange.id = 0; - drvdata->grange.base = drvdata->ctrl->base; - drvdata->grange.npins = drvdata->ctrl->nr_pins; - drvdata->grange.gc = drvdata->gc; - pinctrl_add_gpio_range(drvdata->pctl_dev, &drvdata->grange); + for (bank = 0; bank < drvdata->ctrl->nr_banks; ++bank) { + pin_bank = &drvdata->ctrl->pin_banks[bank]; + pin_bank->grange.name = pin_bank->name; + pin_bank->grange.id = bank; + pin_bank->grange.pin_base = pin_bank->pin_base; + pin_bank->grange.base = pin_bank->gpio_chip.base; + pin_bank->grange.npins = pin_bank->gpio_chip.ngpio; + pin_bank->grange.gc = &pin_bank->gpio_chip; + pinctrl_add_gpio_range(drvdata->pctl_dev, &pin_bank->grange); + } ret = samsung_pinctrl_parse_dt(pdev, drvdata); if (ret) { @@ -728,68 +768,117 @@ static int __devinit samsung_pinctrl_register(struct platform_device *pdev, return 0; } +static const struct gpio_chip samsung_gpiolib_chip = { + .set = samsung_gpio_set, + .get = samsung_gpio_get, + .direction_input = samsung_gpio_direction_input, + .direction_output = samsung_gpio_direction_output, + .to_irq = samsung_gpio_to_irq, + .owner = THIS_MODULE, +}; + /* register the gpiolib interface with the gpiolib subsystem */ static int __devinit samsung_gpiolib_register(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; struct gpio_chip *gc; int ret; - - gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL); - if (!gc) { - dev_err(&pdev->dev, "mem alloc for gpio_chip failed\n"); - return -ENOMEM; - } - - drvdata->gc = gc; - gc->base = drvdata->ctrl->base; - gc->ngpio = drvdata->ctrl->nr_pins; - gc->dev = &pdev->dev; - gc->set = samsung_gpio_set; - gc->get = samsung_gpio_get; - gc->direction_input = samsung_gpio_direction_input; - gc->direction_output = samsung_gpio_direction_output; - gc->label = drvdata->ctrl->label; - gc->owner = THIS_MODULE; - ret = gpiochip_add(gc); - if (ret) { - dev_err(&pdev->dev, "failed to register gpio_chip %s, error " - "code: %d\n", gc->label, ret); - return ret; + int i; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + bank->gpio_chip = samsung_gpiolib_chip; + + gc = &bank->gpio_chip; + gc->base = ctrl->base + bank->pin_base; + gc->ngpio = bank->nr_pins; + gc->dev = &pdev->dev; + gc->of_node = bank->of_node; + gc->label = bank->name; + + ret = gpiochip_add(gc); + if (ret) { + dev_err(&pdev->dev, "failed to register gpio_chip %s, error code: %d\n", + gc->label, ret); + goto fail; + } } return 0; + +fail: + for (--i, --bank; i >= 0; --i, --bank) + if (gpiochip_remove(&bank->gpio_chip)) + dev_err(&pdev->dev, "gpio chip %s remove failed\n", + bank->gpio_chip.label); + return ret; } /* unregister the gpiolib interface with the gpiolib subsystem */ static int __devinit samsung_gpiolib_unregister(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { - int ret = gpiochip_remove(drvdata->gc); - if (ret) { + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; + int ret = 0; + int i; + + for (i = 0; !ret && i < ctrl->nr_banks; ++i, ++bank) + ret = gpiochip_remove(&bank->gpio_chip); + + if (ret) dev_err(&pdev->dev, "gpio chip remove failed\n"); - return ret; - } - return 0; + + return ret; } static const struct of_device_id samsung_pinctrl_dt_match[]; /* retrieve the soc specific data */ static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( + struct samsung_pinctrl_drv_data *d, struct platform_device *pdev) { int id; const struct of_device_id *match; - const struct device_node *node = pdev->dev.of_node; + struct device_node *node = pdev->dev.of_node; + struct device_node *np; + struct samsung_pin_ctrl *ctrl; + struct samsung_pin_bank *bank; + int i; - id = of_alias_get_id(pdev->dev.of_node, "pinctrl"); + id = of_alias_get_id(node, "pinctrl"); if (id < 0) { dev_err(&pdev->dev, "failed to get alias id\n"); return NULL; } match = of_match_node(samsung_pinctrl_dt_match, node); - return (struct samsung_pin_ctrl *)match->data + id; + ctrl = (struct samsung_pin_ctrl *)match->data + id; + + bank = ctrl->pin_banks; + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + bank->drvdata = d; + bank->pin_base = ctrl->nr_pins; + ctrl->nr_pins += bank->nr_pins; + } + + for_each_child_of_node(node, np) { + if (!of_find_property(np, "gpio-controller", NULL)) + continue; + bank = ctrl->pin_banks; + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + if (!strcmp(bank->name, np->name)) { + bank->of_node = np; + break; + } + } + } + + ctrl->base = pin_base; + pin_base += ctrl->nr_pins; + + return ctrl; } static int __devinit samsung_pinctrl_probe(struct platform_device *pdev) @@ -805,18 +894,18 @@ static int __devinit samsung_pinctrl_probe(struct platform_device *pdev) return -ENODEV; } - ctrl = samsung_pinctrl_get_soc_data(pdev); - if (!ctrl) { - dev_err(&pdev->dev, "driver data not available\n"); - return -EINVAL; - } - drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); if (!drvdata) { dev_err(dev, "failed to allocate memory for driver's " "private data\n"); return -ENOMEM; } + + ctrl = samsung_pinctrl_get_soc_data(drvdata, pdev); + if (!ctrl) { + dev_err(&pdev->dev, "driver data not available\n"); + return -EINVAL; + } drvdata->ctrl = ctrl; drvdata->dev = dev; @@ -858,6 +947,8 @@ static int __devinit samsung_pinctrl_probe(struct platform_device *pdev) static const struct of_device_id samsung_pinctrl_dt_match[] = { { .compatible = "samsung,pinctrl-exynos4210", .data = (void *)exynos4210_pin_ctrl }, + { .compatible = "samsung,pinctrl-exynos4x12", + .data = (void *)exynos4x12_pin_ctrl }, {}, }; MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match); diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index b8956934cda6..5addfd16e3cc 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -23,6 +23,8 @@ #include <linux/pinctrl/consumer.h> #include <linux/pinctrl/machine.h> +#include <linux/gpio.h> + /* register offsets within a pin bank */ #define DAT_REG 0x4 #define PUD_REG 0x8 @@ -64,6 +66,7 @@ enum pincfg_type { * @EINT_TYPE_NONE: bank does not support external interrupts * @EINT_TYPE_GPIO: bank supportes external gpio interrupts * @EINT_TYPE_WKUP: bank supportes external wakeup interrupts + * @EINT_TYPE_WKUP_MUX: bank supports multiplexed external wakeup interrupts * * Samsung GPIO controller groups all the available pins into banks. The pins * in a pin bank can support external gpio interrupts or external wakeup @@ -76,6 +79,7 @@ enum eint_type { EINT_TYPE_NONE, EINT_TYPE_GPIO, EINT_TYPE_WKUP, + EINT_TYPE_WKUP_MUX, }; /* maximum length of a pin in pin descriptor (example: "gpa0-0") */ @@ -109,8 +113,12 @@ struct samsung_pinctrl_drv_data; * @conpdn_width: width of the sleep mode function selector bin field. * @pudpdn_width: width of the sleep mode pull up/down selector bit field. * @eint_type: type of the external interrupt supported by the bank. - * @irq_base: starting controller local irq number of the bank. * @name: name to be prefixed for each pin in this pin bank. + * @of_node: OF node of the bank. + * @drvdata: link to controller driver data + * @irq_domain: IRQ domain of the bank. + * @gpio_chip: GPIO chip of the bank. + * @grange: linux gpio pin range supported by this bank. */ struct samsung_pin_bank { u32 pctl_offset; @@ -122,8 +130,13 @@ struct samsung_pin_bank { u8 conpdn_width; u8 pudpdn_width; enum eint_type eint_type; - u32 irq_base; + u32 eint_offset; char *name; + struct device_node *of_node; + struct samsung_pinctrl_drv_data *drvdata; + struct irq_domain *irq_domain; + struct gpio_chip gpio_chip; + struct pinctrl_gpio_range grange; }; /** @@ -132,8 +145,6 @@ struct samsung_pin_bank { * @nr_banks: number of pin banks. * @base: starting system wide pin number. * @nr_pins: number of pins supported by the controller. - * @nr_gint: number of external gpio interrupts supported. - * @nr_wint: number of external wakeup interrupts supported. * @geint_con: offset of the ext-gpio controller registers. * @geint_mask: offset of the ext-gpio interrupt mask registers. * @geint_pend: offset of the ext-gpio interrupt pending registers. @@ -153,8 +164,6 @@ struct samsung_pin_ctrl { u32 base; u32 nr_pins; - u32 nr_gint; - u32 nr_wint; u32 geint_con; u32 geint_mask; @@ -183,8 +192,6 @@ struct samsung_pin_ctrl { * @nr_groups: number of such pin groups. * @pmx_functions: list of pin functions available to the driver. * @nr_function: number of such pin functions. - * @gc: gpio_chip instance registered with gpiolib. - * @grange: linux gpio pin range supported by this controller. */ struct samsung_pinctrl_drv_data { void __iomem *virt_base; @@ -199,12 +206,6 @@ struct samsung_pinctrl_drv_data { unsigned int nr_groups; const struct samsung_pmx_func *pmx_functions; unsigned int nr_functions; - - struct irq_domain *gpio_irqd; - struct irq_domain *wkup_irqd; - - struct gpio_chip *gc; - struct pinctrl_gpio_range grange; }; /** @@ -235,5 +236,6 @@ struct samsung_pmx_func { /* list of all exported SoC specific data */ extern struct samsung_pin_ctrl exynos4210_pin_ctrl[]; +extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[]; #endif /* __PINCTRL_SAMSUNG_H */ diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index 9301a7a95eff..0ef01ee2835f 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -314,14 +314,11 @@ int pinmux_map_to_setting(struct pinctrl_map const *map, { struct pinctrl_dev *pctldev = setting->pctldev; const struct pinmux_ops *pmxops = pctldev->desc->pmxops; - const struct pinctrl_ops *pctlops = pctldev->desc->pctlops; char const * const *groups; unsigned num_groups; int ret; const char *group; int i; - const unsigned *pins; - unsigned num_pins; if (!pmxops) { dev_err(pctldev->dev, "does not support mux function\n"); @@ -376,53 +373,12 @@ int pinmux_map_to_setting(struct pinctrl_map const *map, } setting->data.mux.group = ret; - ret = pctlops->get_group_pins(pctldev, setting->data.mux.group, &pins, - &num_pins); - if (ret) { - dev_err(pctldev->dev, - "could not get pins for device %s group selector %d\n", - pinctrl_dev_get_name(pctldev), setting->data.mux.group); - return -ENODEV; - } - - /* Try to allocate all pins in this group, one by one */ - for (i = 0; i < num_pins; i++) { - ret = pin_request(pctldev, pins[i], map->dev_name, NULL); - if (ret) { - dev_err(pctldev->dev, - "could not request pin %d on device %s\n", - pins[i], pinctrl_dev_get_name(pctldev)); - /* On error release all taken pins */ - i--; /* this pin just failed */ - for (; i >= 0; i--) - pin_free(pctldev, pins[i], NULL); - return -ENODEV; - } - } - return 0; } void pinmux_free_setting(struct pinctrl_setting const *setting) { - struct pinctrl_dev *pctldev = setting->pctldev; - const struct pinctrl_ops *pctlops = pctldev->desc->pctlops; - const unsigned *pins; - unsigned num_pins; - int ret; - int i; - - ret = pctlops->get_group_pins(pctldev, setting->data.mux.group, - &pins, &num_pins); - if (ret) { - dev_err(pctldev->dev, - "could not get pins for device %s group selector %d\n", - pinctrl_dev_get_name(pctldev), setting->data.mux.group); - return; - } - - for (i = 0; i < num_pins; i++) - pin_free(pctldev, pins[i], NULL); + /* This function is currently unused */ } int pinmux_enable_setting(struct pinctrl_setting const *setting) @@ -446,6 +402,22 @@ int pinmux_enable_setting(struct pinctrl_setting const *setting) num_pins = 0; } + /* Try to allocate all pins in this group, one by one */ + for (i = 0; i < num_pins; i++) { + ret = pin_request(pctldev, pins[i], setting->dev_name, NULL); + if (ret) { + dev_err(pctldev->dev, + "could not request pin %d on device %s\n", + pins[i], pinctrl_dev_get_name(pctldev)); + /* On error release all taken pins */ + i--; /* this pin just failed */ + for (; i >= 0; i--) + pin_free(pctldev, pins[i], NULL); + return -ENODEV; + } + } + + /* Now that we have acquired the pins, encode the mux setting */ for (i = 0; i < num_pins; i++) { desc = pin_desc_get(pctldev, pins[i]); if (desc == NULL) { @@ -482,6 +454,7 @@ void pinmux_disable_setting(struct pinctrl_setting const *setting) num_pins = 0; } + /* Flag the descs that no setting is active */ for (i = 0; i < num_pins; i++) { desc = pin_desc_get(pctldev, pins[i]); if (desc == NULL) { @@ -493,6 +466,10 @@ void pinmux_disable_setting(struct pinctrl_setting const *setting) desc->mux_setting = NULL; } + /* And release the pins */ + for (i = 0; i < num_pins; i++) + pin_free(pctldev, pins[i], NULL); + if (ops->disable) ops->disable(pctldev, setting->data.mux.func, setting->data.mux.group); } diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 49a893972318..b1d956d81f0c 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -335,6 +335,9 @@ config AB8500_BATTERY_THERM_ON_BATCTRL help Say Y to enable battery temperature measurements using thermistor connected on BATCTRL ADC. + +source "drivers/power/reset/Kconfig" + endif # POWER_SUPPLY source "drivers/power/avs/Kconfig" diff --git a/drivers/power/Makefile b/drivers/power/Makefile index b949cf85590c..f1d99f4a0bc3 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -49,3 +49,4 @@ obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o obj-$(CONFIG_POWER_AVS) += avs/ obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o +obj-$(CONFIG_POWER_RESET) += reset/ diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig new file mode 100644 index 000000000000..6461b489fb09 --- /dev/null +++ b/drivers/power/reset/Kconfig @@ -0,0 +1,15 @@ +menuconfig POWER_RESET + bool "Board level reset or power off" + help + Provides a number of drivers which either reset a complete board + or shut it down, by manipulating the main power supply on the board. + + Say Y here to enable board reset and power off + +config POWER_RESET_GPIO + bool "GPIO power-off driver" + depends on OF_GPIO && POWER_RESET + help + This driver supports turning off your board via a GPIO line. + If your board needs a GPIO high/low to power down, say Y and + create a binding in your devicetree. diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile new file mode 100644 index 000000000000..751488a4a0c5 --- /dev/null +++ b/drivers/power/reset/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c new file mode 100644 index 000000000000..0491e5335d02 --- /dev/null +++ b/drivers/power/reset/gpio-poweroff.c @@ -0,0 +1,129 @@ +/* + * Toggles a GPIO pin to power down a device + * + * Jamie Lentin <jm@lentin.co.uk> + * Andrew Lunn <andrew@lunn.ch> + * + * Copyright (C) 2012 Jamie Lentin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> +#include <linux/module.h> + +/* + * Hold configuration here, cannot be more than one instance of the driver + * since pm_power_off itself is global. + */ +static int gpio_num = -1; +static int gpio_active_low; + +static void gpio_poweroff_do_poweroff(void) +{ + BUG_ON(gpio_num == -1); + + /* drive it active */ + gpio_direction_output(gpio_num, !gpio_active_low); + mdelay(100); + /* rising edge or drive inactive */ + gpio_set_value(gpio_num, gpio_active_low); + mdelay(100); + /* falling edge */ + gpio_set_value(gpio_num, !gpio_active_low); + + /* give it some time */ + mdelay(3000); + + WARN_ON(1); +} + +static int __devinit gpio_poweroff_probe(struct platform_device *pdev) +{ + enum of_gpio_flags flags; + bool input = false; + int ret; + + /* If a pm_power_off function has already been added, leave it alone */ + if (pm_power_off != NULL) { + pr_err("%s: pm_power_off function already registered", + __func__); + return -EBUSY; + } + + gpio_num = of_get_gpio_flags(pdev->dev.of_node, 0, &flags); + if (gpio_num < 0) { + pr_err("%s: Could not get GPIO configuration: %d", + __func__, gpio_num); + return -ENODEV; + } + gpio_active_low = flags & OF_GPIO_ACTIVE_LOW; + + if (of_get_property(pdev->dev.of_node, "input", NULL)) + input = true; + + ret = gpio_request(gpio_num, "poweroff-gpio"); + if (ret) { + pr_err("%s: Could not get GPIO %d", __func__, gpio_num); + return ret; + } + if (input) { + if (gpio_direction_input(gpio_num)) { + pr_err("Could not set direction of GPIO %d to input", + gpio_num); + goto err; + } + } else { + if (gpio_direction_output(gpio_num, gpio_active_low)) { + pr_err("Could not set direction of GPIO %d", gpio_num); + goto err; + } + } + + pm_power_off = &gpio_poweroff_do_poweroff; + return 0; + +err: + gpio_free(gpio_num); + return -ENODEV; +} + +static int __devexit gpio_poweroff_remove(struct platform_device *pdev) +{ + if (gpio_num != -1) + gpio_free(gpio_num); + if (pm_power_off == &gpio_poweroff_do_poweroff) + pm_power_off = NULL; + + return 0; +} + +static const struct of_device_id of_gpio_poweroff_match[] = { + { .compatible = "gpio-poweroff", }, + {}, +}; + +static struct platform_driver gpio_poweroff_driver = { + .probe = gpio_poweroff_probe, + .remove = __devexit_p(gpio_poweroff_remove), + .driver = { + .name = "poweroff-gpio", + .owner = THIS_MODULE, + .of_match_table = of_gpio_poweroff_match, + }, +}; + +module_platform_driver(gpio_poweroff_driver); + +MODULE_AUTHOR("Jamie Lentin <jm@lentin.co.uk>"); +MODULE_DESCRIPTION("GPIO poweroff driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:poweroff-gpio"); diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c index cd0106293a49..7304139934aa 100644 --- a/drivers/rtc/rtc-mxc.c +++ b/drivers/rtc/rtc-mxc.c @@ -17,8 +17,6 @@ #include <linux/platform_device.h> #include <linux/clk.h> -#include <mach/hardware.h> - #define RTC_INPUT_CLK_32768HZ (0x00 << 5) #define RTC_INPUT_CLK_32000HZ (0x01 << 5) #define RTC_INPUT_CLK_38400HZ (0x02 << 5) @@ -72,14 +70,38 @@ static const u32 PIE_BIT_DEF[MAX_PIE_NUM][2] = { #define RTC_TEST2 0x2C /* 32bit rtc test reg 2 */ #define RTC_TEST3 0x30 /* 32bit rtc test reg 3 */ +enum imx_rtc_type { + IMX1_RTC, + IMX21_RTC, +}; + struct rtc_plat_data { struct rtc_device *rtc; void __iomem *ioaddr; int irq; struct clk *clk; struct rtc_time g_rtc_alarm; + enum imx_rtc_type devtype; }; +static struct platform_device_id imx_rtc_devtype[] = { + { + .name = "imx1-rtc", + .driver_data = IMX1_RTC, + }, { + .name = "imx21-rtc", + .driver_data = IMX21_RTC, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, imx_rtc_devtype); + +static inline int is_imx1_rtc(struct rtc_plat_data *data) +{ + return data->devtype == IMX1_RTC; +} + /* * This function is used to obtain the RTC time or the alarm value in * second. @@ -278,10 +300,13 @@ static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm) */ static int mxc_rtc_set_mmss(struct device *dev, unsigned long time) { + struct platform_device *pdev = to_platform_device(dev); + struct rtc_plat_data *pdata = platform_get_drvdata(pdev); + /* * TTC_DAYR register is 9-bit in MX1 SoC, save time and day of year only */ - if (cpu_is_mx1()) { + if (is_imx1_rtc(pdata)) { struct rtc_time tm; rtc_time_to_tm(time, &tm); @@ -360,6 +385,8 @@ static int __devinit mxc_rtc_probe(struct platform_device *pdev) if (!pdata) return -ENOMEM; + pdata->devtype = pdev->id_entry->driver_data; + if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res), pdev->name)) return -EBUSY; @@ -480,6 +507,7 @@ static struct platform_driver mxc_rtc_driver = { #endif .owner = THIS_MODULE, }, + .id_table = imx_rtc_devtype, .probe = mxc_rtc_probe, .remove = __devexit_p(mxc_rtc_remove), }; diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index c1bafc3f3fb1..9594ab62702b 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -1972,7 +1972,7 @@ sci_io_request_frame_handler(struct isci_request *ireq, frame_index, (void **)&frame_buffer); - sci_controller_copy_sata_response(&ireq->stp.req, + sci_controller_copy_sata_response(&ireq->stp.rsp, frame_header, frame_buffer); diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 2936b447cae9..2c0d0ec8150b 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -55,6 +55,7 @@ #include <linux/cpu.h> #include <linux/mutex.h> #include <linux/async.h> +#include <asm/unaligned.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -1062,6 +1063,50 @@ int scsi_get_vpd_page(struct scsi_device *sdev, u8 page, unsigned char *buf, EXPORT_SYMBOL_GPL(scsi_get_vpd_page); /** + * scsi_report_opcode - Find out if a given command opcode is supported + * @sdev: scsi device to query + * @buffer: scratch buffer (must be at least 20 bytes long) + * @len: length of buffer + * @opcode: opcode for command to look up + * + * Uses the REPORT SUPPORTED OPERATION CODES to look up the given + * opcode. Returns 0 if RSOC fails or if the command opcode is + * unsupported. Returns 1 if the device claims to support the command. + */ +int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer, + unsigned int len, unsigned char opcode) +{ + unsigned char cmd[16]; + struct scsi_sense_hdr sshdr; + int result; + + if (sdev->no_report_opcodes || sdev->scsi_level < SCSI_SPC_3) + return 0; + + memset(cmd, 0, 16); + cmd[0] = MAINTENANCE_IN; + cmd[1] = MI_REPORT_SUPPORTED_OPERATION_CODES; + cmd[2] = 1; /* One command format */ + cmd[3] = opcode; + put_unaligned_be32(len, &cmd[6]); + memset(buffer, 0, len); + + result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len, + &sshdr, 30 * HZ, 3, NULL); + + if (result && scsi_sense_valid(&sshdr) && + sshdr.sense_key == ILLEGAL_REQUEST && + (sshdr.asc == 0x20 || sshdr.asc == 0x24) && sshdr.ascq == 0x00) + return 0; + + if ((buffer[1] & 3) == 3) /* Command supported */ + return 1; + + return 0; +} +EXPORT_SYMBOL(scsi_report_opcode); + +/** * scsi_device_get - get an additional reference to a scsi_device * @sdev: device to get a reference to * diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index da36a3a81a9e..9032e910bca3 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -900,11 +900,23 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) action = ACTION_FAIL; error = -EILSEQ; /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */ - } else if ((sshdr.asc == 0x20 || sshdr.asc == 0x24) && - (cmd->cmnd[0] == UNMAP || - cmd->cmnd[0] == WRITE_SAME_16 || - cmd->cmnd[0] == WRITE_SAME)) { - description = "Discard failure"; + } else if (sshdr.asc == 0x20 || sshdr.asc == 0x24) { + switch (cmd->cmnd[0]) { + case UNMAP: + description = "Discard failure"; + break; + case WRITE_SAME: + case WRITE_SAME_16: + if (cmd->cmnd[1] & 0x8) + description = "Discard failure"; + else + description = + "Write same failure"; + break; + default: + description = "Invalid command failure"; + break; + } action = ACTION_FAIL; error = -EREMOTEIO; } else diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 12f6fdfc1147..352bc77b7c88 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -99,6 +99,7 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC); #endif static void sd_config_discard(struct scsi_disk *, unsigned int); +static void sd_config_write_same(struct scsi_disk *); static int sd_revalidate_disk(struct gendisk *); static void sd_unlock_native_capacity(struct gendisk *disk); static int sd_probe(struct device *); @@ -395,6 +396,45 @@ sd_store_max_medium_access_timeouts(struct device *dev, return err ? err : count; } +static ssize_t +sd_show_write_same_blocks(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_disk *sdkp = to_scsi_disk(dev); + + return snprintf(buf, 20, "%u\n", sdkp->max_ws_blocks); +} + +static ssize_t +sd_store_write_same_blocks(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct scsi_disk *sdkp = to_scsi_disk(dev); + struct scsi_device *sdp = sdkp->device; + unsigned long max; + int err; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + if (sdp->type != TYPE_DISK) + return -EINVAL; + + err = kstrtoul(buf, 10, &max); + + if (err) + return err; + + if (max == 0) + sdp->no_write_same = 1; + else if (max <= SD_MAX_WS16_BLOCKS) + sdkp->max_ws_blocks = max; + + sd_config_write_same(sdkp); + + return count; +} + static struct device_attribute sd_disk_attrs[] = { __ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type, sd_store_cache_type), @@ -410,6 +450,8 @@ static struct device_attribute sd_disk_attrs[] = { __ATTR(thin_provisioning, S_IRUGO, sd_show_thin_provisioning, NULL), __ATTR(provisioning_mode, S_IRUGO|S_IWUSR, sd_show_provisioning_mode, sd_store_provisioning_mode), + __ATTR(max_write_same_blocks, S_IRUGO|S_IWUSR, + sd_show_write_same_blocks, sd_store_write_same_blocks), __ATTR(max_medium_access_timeouts, S_IRUGO|S_IWUSR, sd_show_max_medium_access_timeouts, sd_store_max_medium_access_timeouts), @@ -561,19 +603,23 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode) return; case SD_LBP_UNMAP: - max_blocks = min_not_zero(sdkp->max_unmap_blocks, 0xffffffff); + max_blocks = min_not_zero(sdkp->max_unmap_blocks, + (u32)SD_MAX_WS16_BLOCKS); break; case SD_LBP_WS16: - max_blocks = min_not_zero(sdkp->max_ws_blocks, 0xffffffff); + max_blocks = min_not_zero(sdkp->max_ws_blocks, + (u32)SD_MAX_WS16_BLOCKS); break; case SD_LBP_WS10: - max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff); + max_blocks = min_not_zero(sdkp->max_ws_blocks, + (u32)SD_MAX_WS10_BLOCKS); break; case SD_LBP_ZERO: - max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff); + max_blocks = min_not_zero(sdkp->max_ws_blocks, + (u32)SD_MAX_WS10_BLOCKS); q->limits.discard_zeroes_data = 1; break; } @@ -583,29 +629,26 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode) } /** - * scsi_setup_discard_cmnd - unmap blocks on thinly provisioned device + * sd_setup_discard_cmnd - unmap blocks on thinly provisioned device * @sdp: scsi device to operate one * @rq: Request to prepare * * Will issue either UNMAP or WRITE SAME(16) depending on preference * indicated by target device. **/ -static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq) +static int sd_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq) { struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); - struct bio *bio = rq->bio; - sector_t sector = bio->bi_sector; - unsigned int nr_sectors = bio_sectors(bio); + sector_t sector = blk_rq_pos(rq); + unsigned int nr_sectors = blk_rq_sectors(rq); + unsigned int nr_bytes = blk_rq_bytes(rq); unsigned int len; int ret; char *buf; struct page *page; - if (sdkp->device->sector_size == 4096) { - sector >>= 3; - nr_sectors >>= 3; - } - + sector >>= ilog2(sdp->sector_size) - 9; + nr_sectors >>= ilog2(sdp->sector_size) - 9; rq->timeout = SD_TIMEOUT; memset(rq->cmd, 0, rq->cmd_len); @@ -660,6 +703,7 @@ static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq) blk_add_request_payload(rq, page, len); ret = scsi_setup_blk_pc_cmnd(sdp, rq); rq->buffer = page_address(page); + rq->__data_len = nr_bytes; out: if (ret != BLKPREP_OK) { @@ -669,6 +713,83 @@ out: return ret; } +static void sd_config_write_same(struct scsi_disk *sdkp) +{ + struct request_queue *q = sdkp->disk->queue; + unsigned int logical_block_size = sdkp->device->sector_size; + unsigned int blocks = 0; + + if (sdkp->device->no_write_same) { + sdkp->max_ws_blocks = 0; + goto out; + } + + /* Some devices can not handle block counts above 0xffff despite + * supporting WRITE SAME(16). Consequently we default to 64k + * blocks per I/O unless the device explicitly advertises a + * bigger limit. + */ + if (sdkp->max_ws_blocks == 0) + sdkp->max_ws_blocks = SD_MAX_WS10_BLOCKS; + + if (sdkp->ws16 || sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS) + blocks = min_not_zero(sdkp->max_ws_blocks, + (u32)SD_MAX_WS16_BLOCKS); + else + blocks = min_not_zero(sdkp->max_ws_blocks, + (u32)SD_MAX_WS10_BLOCKS); + +out: + blk_queue_max_write_same_sectors(q, blocks * (logical_block_size >> 9)); +} + +/** + * sd_setup_write_same_cmnd - write the same data to multiple blocks + * @sdp: scsi device to operate one + * @rq: Request to prepare + * + * Will issue either WRITE SAME(10) or WRITE SAME(16) depending on + * preference indicated by target device. + **/ +static int sd_setup_write_same_cmnd(struct scsi_device *sdp, struct request *rq) +{ + struct scsi_disk *sdkp = scsi_disk(rq->rq_disk); + struct bio *bio = rq->bio; + sector_t sector = blk_rq_pos(rq); + unsigned int nr_sectors = blk_rq_sectors(rq); + unsigned int nr_bytes = blk_rq_bytes(rq); + int ret; + + if (sdkp->device->no_write_same) + return BLKPREP_KILL; + + BUG_ON(bio_offset(bio) || bio_iovec(bio)->bv_len != sdp->sector_size); + + sector >>= ilog2(sdp->sector_size) - 9; + nr_sectors >>= ilog2(sdp->sector_size) - 9; + + rq->__data_len = sdp->sector_size; + rq->timeout = SD_WRITE_SAME_TIMEOUT; + memset(rq->cmd, 0, rq->cmd_len); + + if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff) { + rq->cmd_len = 16; + rq->cmd[0] = WRITE_SAME_16; + put_unaligned_be64(sector, &rq->cmd[2]); + put_unaligned_be32(nr_sectors, &rq->cmd[10]); + } else { + rq->cmd_len = 10; + rq->cmd[0] = WRITE_SAME; + put_unaligned_be32(sector, &rq->cmd[2]); + put_unaligned_be16(nr_sectors, &rq->cmd[7]); + } + + ret = scsi_setup_blk_pc_cmnd(sdp, rq); + rq->__data_len = nr_bytes; + + return ret; +} + static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq) { rq->timeout = SD_FLUSH_TIMEOUT; @@ -712,7 +833,10 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) * block PC requests to make life easier. */ if (rq->cmd_flags & REQ_DISCARD) { - ret = scsi_setup_discard_cmnd(sdp, rq); + ret = sd_setup_discard_cmnd(sdp, rq); + goto out; + } else if (rq->cmd_flags & REQ_WRITE_SAME) { + ret = sd_setup_write_same_cmnd(sdp, rq); goto out; } else if (rq->cmd_flags & REQ_FLUSH) { ret = scsi_setup_flush_cmnd(sdp, rq); @@ -1482,12 +1606,21 @@ static int sd_done(struct scsi_cmnd *SCpnt) unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt); struct scsi_sense_hdr sshdr; struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk); + struct request *req = SCpnt->request; int sense_valid = 0; int sense_deferred = 0; unsigned char op = SCpnt->cmnd[0]; + unsigned char unmap = SCpnt->cmnd[1] & 8; - if ((SCpnt->request->cmd_flags & REQ_DISCARD) && !result) - scsi_set_resid(SCpnt, 0); + if (req->cmd_flags & REQ_DISCARD || req->cmd_flags & REQ_WRITE_SAME) { + if (!result) { + good_bytes = blk_rq_bytes(req); + scsi_set_resid(SCpnt, 0); + } else { + good_bytes = 0; + scsi_set_resid(SCpnt, blk_rq_bytes(req)); + } + } if (result) { sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr); @@ -1536,9 +1669,25 @@ static int sd_done(struct scsi_cmnd *SCpnt) if (sshdr.asc == 0x10) /* DIX: Host detected corruption */ good_bytes = sd_completed_bytes(SCpnt); /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */ - if ((sshdr.asc == 0x20 || sshdr.asc == 0x24) && - (op == UNMAP || op == WRITE_SAME_16 || op == WRITE_SAME)) - sd_config_discard(sdkp, SD_LBP_DISABLE); + if (sshdr.asc == 0x20 || sshdr.asc == 0x24) { + switch (op) { + case UNMAP: + sd_config_discard(sdkp, SD_LBP_DISABLE); + break; + case WRITE_SAME_16: + case WRITE_SAME: + if (unmap) + sd_config_discard(sdkp, SD_LBP_DISABLE); + else { + sdkp->device->no_write_same = 1; + sd_config_write_same(sdkp); + + good_bytes = 0; + req->__data_len = blk_rq_bytes(req); + req->cmd_flags |= REQ_QUIET; + } + } + } break; default: break; @@ -2374,9 +2523,7 @@ static void sd_read_block_limits(struct scsi_disk *sdkp) if (buffer[3] == 0x3c) { unsigned int lba_count, desc_count; - sdkp->max_ws_blocks = - (u32) min_not_zero(get_unaligned_be64(&buffer[36]), - (u64)0xffffffff); + sdkp->max_ws_blocks = (u32)get_unaligned_be64(&buffer[36]); if (!sdkp->lbpme) goto out; @@ -2469,6 +2616,13 @@ static void sd_read_block_provisioning(struct scsi_disk *sdkp) kfree(buffer); } +static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer) +{ + if (scsi_report_opcode(sdkp->device, buffer, SD_BUF_SIZE, + WRITE_SAME_16)) + sdkp->ws16 = 1; +} + static int sd_try_extended_inquiry(struct scsi_device *sdp) { /* @@ -2528,6 +2682,7 @@ static int sd_revalidate_disk(struct gendisk *disk) sd_read_write_protect_flag(sdkp, buffer); sd_read_cache_type(sdkp, buffer); sd_read_app_tag_own(sdkp, buffer); + sd_read_write_same(sdkp, buffer); } sdkp->first_scan = 0; @@ -2545,6 +2700,7 @@ static int sd_revalidate_disk(struct gendisk *disk) blk_queue_flush(sdkp->disk->queue, flush); set_capacity(disk, sdkp->capacity); + sd_config_write_same(sdkp); kfree(buffer); out: diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 47c52a6d733c..74a1e4ca5401 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -14,6 +14,7 @@ #define SD_TIMEOUT (30 * HZ) #define SD_MOD_TIMEOUT (75 * HZ) #define SD_FLUSH_TIMEOUT (60 * HZ) +#define SD_WRITE_SAME_TIMEOUT (120 * HZ) /* * Number of allowed retries @@ -39,6 +40,11 @@ enum { }; enum { + SD_MAX_WS10_BLOCKS = 0xffff, + SD_MAX_WS16_BLOCKS = 0x7fffff, +}; + +enum { SD_LBP_FULL = 0, /* Full logical block provisioning */ SD_LBP_UNMAP, /* Use UNMAP command */ SD_LBP_WS16, /* Use WRITE SAME(16) with UNMAP bit */ @@ -77,6 +83,7 @@ struct scsi_disk { unsigned lbpws : 1; unsigned lbpws10 : 1; unsigned lbpvpd : 1; + unsigned ws16 : 1; }; #define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev) diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index 094fdc366f30..97cdf0856aed 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -39,7 +39,6 @@ #include <linux/workqueue.h> #include <mach/clk.h> -#include <mach/iomap.h> #include "nvec.h" diff --git a/drivers/staging/tidspbridge/core/ue_deh.c b/drivers/staging/tidspbridge/core/ue_deh.c index 3d28b2345fbd..6aea6f1b4982 100644 --- a/drivers/staging/tidspbridge/core/ue_deh.c +++ b/drivers/staging/tidspbridge/core/ue_deh.c @@ -19,7 +19,6 @@ #include <linux/kernel.h> #include <linux/interrupt.h> -#include <plat/dmtimer.h> #include <dspbridge/dbdefs.h> #include <dspbridge/dspdeh.h> diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index 6f3ea9bbc818..c48b93813fc1 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -97,6 +97,7 @@ config UIO_NETX config UIO_PRUSS tristate "Texas Instruments PRUSS driver" depends on ARCH_DAVINCI_DA850 + select GENERIC_ALLOCATOR help PRUSS driver for OMAPL138/DA850/AM18XX devices PRUSS driver requires user space components, examples and user space diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c index 33a7a273b453..f8738de342be 100644 --- a/drivers/uio/uio_pruss.c +++ b/drivers/uio/uio_pruss.c @@ -25,7 +25,7 @@ #include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/slab.h> -#include <mach/sram.h> +#include <linux/genalloc.h> #define DRV_NAME "pruss_uio" #define DRV_VERSION "1.0" @@ -65,10 +65,11 @@ struct uio_pruss_dev { dma_addr_t sram_paddr; dma_addr_t ddr_paddr; void __iomem *prussio_vaddr; - void *sram_vaddr; + unsigned long sram_vaddr; void *ddr_vaddr; unsigned int hostirq_start; unsigned int pintc_base; + struct gen_pool *sram_pool; }; static irqreturn_t pruss_handler(int irq, struct uio_info *info) @@ -106,7 +107,9 @@ static void pruss_cleanup(struct platform_device *dev, gdev->ddr_paddr); } if (gdev->sram_vaddr) - sram_free(gdev->sram_vaddr, sram_pool_sz); + gen_pool_free(gdev->sram_pool, + gdev->sram_vaddr, + sram_pool_sz); kfree(gdev->info); clk_put(gdev->pruss_clk); kfree(gdev); @@ -152,10 +155,17 @@ static int __devinit pruss_probe(struct platform_device *dev) goto out_free; } - gdev->sram_vaddr = sram_alloc(sram_pool_sz, &(gdev->sram_paddr)); - if (!gdev->sram_vaddr) { - dev_err(&dev->dev, "Could not allocate SRAM pool\n"); - goto out_free; + if (pdata->sram_pool) { + gdev->sram_pool = pdata->sram_pool; + gdev->sram_vaddr = + gen_pool_alloc(gdev->sram_pool, sram_pool_sz); + if (!gdev->sram_vaddr) { + dev_err(&dev->dev, "Could not allocate SRAM pool\n"); + goto out_free; + } + gdev->sram_paddr = + gen_pool_virt_to_phys(gdev->sram_pool, + gdev->sram_vaddr); } gdev->ddr_vaddr = dma_alloc_coherent(&dev->dev, extram_pool_sz, diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 23afa06b65a4..1b8ddc3ddc50 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -44,7 +44,7 @@ #include <asm/unaligned.h> #include <asm/mach-types.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <mach/usb.h> diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 4a08fc0b27c9..8e58a5fa1994 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -24,7 +24,6 @@ #include <linux/usb/ulpi.h> #include <linux/slab.h> -#include <mach/hardware.h> #include <linux/platform_data/usb-ehci-mxc.h> #include <asm/mach-types.h> diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 9c2717d66730..e7e8275028d3 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -14,6 +14,9 @@ #include <linux/mbus.h> #include <linux/clk.h> #include <linux/platform_data/usb-ehci-orion.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> #define rdl(off) __raw_readl(hcd->regs + (off)) #define wrl(off, val) __raw_writel((val), hcd->regs + (off)) @@ -181,6 +184,8 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, } } +static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32); + static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) { struct orion_ehci_data *pd = pdev->dev.platform_data; @@ -191,13 +196,17 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) struct clk *clk; void __iomem *regs; int irq, err; + enum orion_ehci_phy_ver phy_version; if (usb_disabled()) return -ENODEV; pr_debug("Initializing Orion-SoC USB Host Controller\n"); - irq = platform_get_irq(pdev, 0); + if (pdev->dev.of_node) + irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + else + irq = platform_get_irq(pdev, 0); if (irq <= 0) { dev_err(&pdev->dev, "Found HC with no IRQ. Check %s setup!\n", @@ -215,6 +224,14 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) goto err1; } + /* + * Right now device-tree probed devices don't get dma_mask + * set. Since shared usb code relies on it, set it here for + * now. Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &ehci_orion_dma_mask; + if (!request_mem_region(res->start, resource_size(res), ehci_orion_hc_driver.description)) { dev_dbg(&pdev->dev, "controller already in use\n"); @@ -262,7 +279,12 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) /* * setup Orion USB controller. */ - switch (pd->phy_version) { + if (pdev->dev.of_node) + phy_version = EHCI_PHY_NA; + else + phy_version = pd->phy_version; + + switch (phy_version) { case EHCI_PHY_NA: /* dont change USB phy settings */ break; case EHCI_PHY_ORION: @@ -317,9 +339,19 @@ static int __exit ehci_orion_drv_remove(struct platform_device *pdev) MODULE_ALIAS("platform:orion-ehci"); +static const struct of_device_id ehci_orion_dt_ids[] __devinitdata = { + { .compatible = "marvell,orion-ehci", }, + {}, +}; +MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids); + static struct platform_driver ehci_orion_driver = { .probe = ehci_orion_drv_probe, .remove = __exit_p(ehci_orion_drv_remove), .shutdown = usb_hcd_platform_shutdown, - .driver.name = "orion-ehci", + .driver = { + .name = "orion-ehci", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ehci_orion_dt_ids), + }, }; diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 6223d1757848..2de089001ae9 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -28,7 +28,10 @@ #include <linux/pm_runtime.h> #include <linux/usb/tegra_usb_phy.h> -#include <mach/iomap.h> + +#define TEGRA_USB_BASE 0xC5000000 +#define TEGRA_USB2_BASE 0xC5004000 +#define TEGRA_USB3_BASE 0xC5008000 #define TEGRA_USB_DMA_ALIGN 32 diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index bfca114f7c56..82310b6bc97b 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -16,7 +16,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/slab.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "musb_core.h" #include "tusb6010.h" diff --git a/drivers/usb/phy/tegra_usb_phy.c b/drivers/usb/phy/tegra_usb_phy.c index 987116f9efcd..9d13c81754e0 100644 --- a/drivers/usb/phy/tegra_usb_phy.c +++ b/drivers/usb/phy/tegra_usb_phy.c @@ -29,7 +29,9 @@ #include <linux/usb/ulpi.h> #include <asm/mach-types.h> #include <linux/usb/tegra_usb_phy.h> -#include <mach/iomap.h> + +#define TEGRA_USB_BASE 0xC5000000 +#define TEGRA_USB_SIZE SZ_16K #define ULPI_VIEWPORT 0x170 diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index a3d54366afcc..92f35abee92d 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -186,6 +186,12 @@ static int slave_configure(struct scsi_device *sdev) /* Some devices don't handle VPD pages correctly */ sdev->skip_vpd_pages = 1; + /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */ + sdev->no_report_opcodes = 1; + + /* Do not attempt to use WRITE SAME */ + sdev->no_write_same = 1; + /* Some disks return the total number of blocks in response * to READ CAPACITY rather than the highest block number. * If this device makes that mistake, tell the sd driver. */ diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index cf2688de0832..e501dbc966b3 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -33,7 +33,6 @@ #include <linux/math64.h> #include <linux/platform_data/video-imxfb.h> -#include <mach/hardware.h> /* * Complain if VAR is out of range. @@ -53,8 +52,8 @@ #define LCDC_SIZE 0x04 #define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20) -#define YMAX_MASK (cpu_is_mx1() ? 0x1ff : 0x3ff) -#define SIZE_YMAX(y) ((y) & YMAX_MASK) +#define YMAX_MASK_IMX1 0x1ff +#define YMAX_MASK_IMX21 0x3ff #define LCDC_VPW 0x08 #define VPW_VPW(x) ((x) & 0x3ff) @@ -128,12 +127,18 @@ struct imxfb_rgb { struct fb_bitfield transp; }; +enum imxfb_type { + IMX1_FB, + IMX21_FB, +}; + struct imxfb_info { struct platform_device *pdev; void __iomem *regs; struct clk *clk_ipg; struct clk *clk_ahb; struct clk *clk_per; + enum imxfb_type devtype; /* * These are the addresses we mapped @@ -168,6 +173,24 @@ struct imxfb_info { void (*backlight_power)(int); }; +static struct platform_device_id imxfb_devtype[] = { + { + .name = "imx1-fb", + .driver_data = IMX1_FB, + }, { + .name = "imx21-fb", + .driver_data = IMX21_FB, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, imxfb_devtype); + +static inline int is_imx1_fb(struct imxfb_info *fbi) +{ + return fbi->devtype == IMX1_FB; +} + #define IMX_NAME "IMX" /* @@ -366,7 +389,7 @@ static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) break; case 16: default: - if (cpu_is_mx1()) + if (is_imx1_fb(fbi)) pcr |= PCR_BPIX_12; else pcr |= PCR_BPIX_16; @@ -596,6 +619,7 @@ static struct fb_ops imxfb_ops = { static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info) { struct imxfb_info *fbi = info->par; + u32 ymax_mask = is_imx1_fb(fbi) ? YMAX_MASK_IMX1 : YMAX_MASK_IMX21; pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n", var->xres, var->hsync_len, @@ -617,7 +641,7 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf if (var->right_margin > 255) printk(KERN_ERR "%s: invalid right_margin %d\n", info->fix.id, var->right_margin); - if (var->yres < 1 || var->yres > YMAX_MASK) + if (var->yres < 1 || var->yres > ymax_mask) printk(KERN_ERR "%s: invalid yres %d\n", info->fix.id, var->yres); if (var->vsync_len > 100) @@ -645,7 +669,7 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf VCR_V_WAIT_2(var->upper_margin), fbi->regs + LCDC_VCR); - writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres), + writel(SIZE_XMAX(var->xres) | (var->yres & ymax_mask), fbi->regs + LCDC_SIZE); writel(fbi->pcr, fbi->regs + LCDC_PCR); @@ -765,6 +789,7 @@ static int __init imxfb_probe(struct platform_device *pdev) return -ENOMEM; fbi = info->par; + fbi->devtype = pdev->id_entry->driver_data; if (!fb_mode) fb_mode = pdata->mode[0].mode.name; @@ -939,6 +964,7 @@ static struct platform_driver imxfb_driver = { .driver = { .name = DRIVER_NAME, }, + .id_table = imxfb_devtype, }; static int imxfb_setup(void) diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index ce1d452464ed..736887208574 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -26,10 +26,9 @@ #include <linux/console.h> #include <linux/clk.h> #include <linux/mutex.h> +#include <linux/dma/ipu-dma.h> #include <linux/platform_data/dma-imx.h> -#include <mach/hardware.h> -#include <mach/ipu.h> #include <linux/platform_data/video-mx3fb.h> #include <asm/io.h> diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index c39d6e46f8c5..b52f62595f65 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c @@ -31,7 +31,7 @@ #include <linux/gfp.h> #include <mach/lcdc.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include <asm/mach-types.h> diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 1b5ee8ec192a..e31f5b33b501 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -30,7 +30,7 @@ #include <linux/uaccess.h> #include <linux/module.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "omapfb.h" #include "lcdc.h" diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c index c510a4457398..d4e7684e7045 100644 --- a/drivers/video/omap/sossi.c +++ b/drivers/video/omap/sossi.c @@ -25,7 +25,7 @@ #include <linux/io.h> #include <linux/interrupt.h> -#include <plat-omap/dma-omap.h> +#include <linux/omap-dma.h> #include "omapfb.h" #include "lcdc.h" diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index d64ac3842884..bee92846cfab 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -365,11 +365,20 @@ struct platform_device *dsi_get_dsidev_from_id(int module) struct omap_dss_output *out; enum omap_dss_output_id id; - id = module == 0 ? OMAP_DSS_OUTPUT_DSI1 : OMAP_DSS_OUTPUT_DSI2; + switch (module) { + case 0: + id = OMAP_DSS_OUTPUT_DSI1; + break; + case 1: + id = OMAP_DSS_OUTPUT_DSI2; + break; + default: + return NULL; + } out = omap_dss_get_output(id); - return out->pdev; + return out ? out->pdev : NULL; } static inline void dsi_write_reg(struct platform_device *dsidev, diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c index 363852a0f764..602102cebcbf 100644 --- a/drivers/video/omap2/dss/dss.c +++ b/drivers/video/omap2/dss/dss.c @@ -695,11 +695,15 @@ static int dss_get_clocks(void) dss.dss_clk = clk; - clk = clk_get(NULL, dss.feat->clk_name); - if (IS_ERR(clk)) { - DSSERR("Failed to get %s\n", dss.feat->clk_name); - r = PTR_ERR(clk); - goto err; + if (dss.feat->clk_name) { + clk = clk_get(NULL, dss.feat->clk_name); + if (IS_ERR(clk)) { + DSSERR("Failed to get %s\n", dss.feat->clk_name); + r = PTR_ERR(clk); + goto err; + } + } else { + clk = NULL; } dss.dpll4_m4_ck = clk; diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index adcc906d12f8..0d6d7213a858 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -645,8 +645,10 @@ static void hdmi_dump_regs(struct seq_file *s) { mutex_lock(&hdmi.lock); - if (hdmi_runtime_get()) + if (hdmi_runtime_get()) { + mutex_unlock(&hdmi.lock); return; + } hdmi.ip_data.ops->dump_wrapper(&hdmi.ip_data, s); hdmi.ip_data.ops->dump_pll(&hdmi.ip_data, s); diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c index 55a39be694a5..532a31b3d96b 100644 --- a/drivers/video/omap2/omapfb/omapfb-ioctl.c +++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c @@ -787,7 +787,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg) case OMAPFB_WAITFORVSYNC: DBG("ioctl WAITFORVSYNC\n"); - if (!display && !display->output && !display->output->manager) { + if (!display || !display->output || !display->output->manager) { r = -EINVAL; break; } diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c index 05e1be85fdee..dc42e44b6bc1 100644 --- a/drivers/watchdog/at91sam9_wdt.c +++ b/drivers/watchdog/at91sam9_wdt.c @@ -32,6 +32,7 @@ #include <linux/timer.h> #include <linux/bitops.h> #include <linux/uaccess.h> +#include <linux/of.h> #include "at91sam9_wdt.h" @@ -302,11 +303,21 @@ static int __exit at91wdt_remove(struct platform_device *pdev) return res; } +#if defined(CONFIG_OF) +static const struct of_device_id at91_wdt_dt_ids[] __initconst = { + { .compatible = "atmel,at91sam9260-wdt" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, at91_wdt_dt_ids); +#endif + static struct platform_driver at91wdt_driver = { .remove = __exit_p(at91wdt_remove), .driver = { .name = "at91_wdt", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(at91_wdt_dt_ids), }, }; diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c index bcfab2b00ad2..9a45d0294cf4 100644 --- a/drivers/watchdog/imx2_wdt.c +++ b/drivers/watchdog/imx2_wdt.c @@ -33,7 +33,6 @@ #include <linux/uaccess.h> #include <linux/timer.h> #include <linux/jiffies.h> -#include <mach/hardware.h> #define DRIVER_NAME "imx2-wdt" diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 477a1d47a64c..e5e7069aad93 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -45,8 +45,6 @@ #include <linux/uaccess.h> #include <linux/slab.h> #include <linux/pm_runtime.h> -#include <mach/hardware.h> - #include <linux/platform_data/omap-wd-timer.h> #include "omap_wdt.h" diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index 8adb9cc267f9..71f5c459b088 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -361,13 +361,13 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) down_write(&mm->mmap_sem); vma = find_vma(mm, m.addr); - ret = -EINVAL; if (!vma || vma->vm_ops != &privcmd_vm_ops || (m.addr != vma->vm_start) || ((m.addr + (nr_pages << PAGE_SHIFT)) != vma->vm_end) || !privcmd_enforce_singleshot_mapping(vma)) { up_write(&mm->mmap_sem); + ret = -EINVAL; goto out; } @@ -383,12 +383,16 @@ static long privcmd_ioctl_mmap_batch(void __user *udata, int version) up_write(&mm->mmap_sem); - if (state.global_error && (version == 1)) { - /* Write back errors in second pass. */ - state.user_mfn = (xen_pfn_t *)m.arr; - state.err = err_array; - ret = traverse_pages(m.num, sizeof(xen_pfn_t), - &pagelist, mmap_return_errors_v1, &state); + if (version == 1) { + if (state.global_error) { + /* Write back errors in second pass. */ + state.user_mfn = (xen_pfn_t *)m.arr; + state.err = err_array; + ret = traverse_pages(m.num, sizeof(xen_pfn_t), + &pagelist, mmap_return_errors_v1, &state); + } else + ret = 0; + } else if (version == 2) { ret = __copy_to_user(m.err, err_array, m.num * sizeof(int)); if (ret) diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c index 7320a66e958f..22548f56197b 100644 --- a/fs/ext3/balloc.c +++ b/fs/ext3/balloc.c @@ -2101,8 +2101,9 @@ int ext3_trim_fs(struct super_block *sb, struct fstrim_range *range) end = start + (range->len >> sb->s_blocksize_bits) - 1; minlen = range->minlen >> sb->s_blocksize_bits; - if (unlikely(minlen > EXT3_BLOCKS_PER_GROUP(sb)) || - unlikely(start >= max_blks)) + if (minlen > EXT3_BLOCKS_PER_GROUP(sb) || + start >= max_blks || + range->len < sb->s_blocksize) return -EINVAL; if (end >= max_blks) end = max_blks - 1; diff --git a/fs/file.c b/fs/file.c index 708d997a7748..7cb71b992603 100644 --- a/fs/file.c +++ b/fs/file.c @@ -685,7 +685,6 @@ void do_close_on_exec(struct files_struct *files) struct fdtable *fdt; /* exec unshares first */ - BUG_ON(atomic_read(&files->count) != 1); spin_lock(&files->file_lock); for (i = 0; ; i++) { unsigned long set; diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c index 60ef3fb707ff..1506673c087e 100644 --- a/fs/jffs2/file.c +++ b/fs/jffs2/file.c @@ -138,33 +138,39 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping, struct page *pg; struct inode *inode = mapping->host; struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode); + struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb); + struct jffs2_raw_inode ri; + uint32_t alloc_len = 0; pgoff_t index = pos >> PAGE_CACHE_SHIFT; uint32_t pageofs = index << PAGE_CACHE_SHIFT; int ret = 0; + jffs2_dbg(1, "%s()\n", __func__); + + if (pageofs > inode->i_size) { + ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len, + ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE); + if (ret) + return ret; + } + + mutex_lock(&f->sem); pg = grab_cache_page_write_begin(mapping, index, flags); - if (!pg) + if (!pg) { + if (alloc_len) + jffs2_complete_reservation(c); + mutex_unlock(&f->sem); return -ENOMEM; + } *pagep = pg; - jffs2_dbg(1, "%s()\n", __func__); - - if (pageofs > inode->i_size) { + if (alloc_len) { /* Make new hole frag from old EOF to new page */ - struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb); - struct jffs2_raw_inode ri; struct jffs2_full_dnode *fn; - uint32_t alloc_len; jffs2_dbg(1, "Writing new hole frag 0x%x-0x%x between current EOF and new page\n", (unsigned int)inode->i_size, pageofs); - ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len, - ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE); - if (ret) - goto out_page; - - mutex_lock(&f->sem); memset(&ri, 0, sizeof(ri)); ri.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK); @@ -191,7 +197,6 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping, if (IS_ERR(fn)) { ret = PTR_ERR(fn); jffs2_complete_reservation(c); - mutex_unlock(&f->sem); goto out_page; } ret = jffs2_add_full_dnode_to_inode(c, f, fn); @@ -206,12 +211,10 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping, jffs2_mark_node_obsolete(c, fn->raw); jffs2_free_full_dnode(fn); jffs2_complete_reservation(c); - mutex_unlock(&f->sem); goto out_page; } jffs2_complete_reservation(c); inode->i_size = pageofs; - mutex_unlock(&f->sem); } /* @@ -220,18 +223,18 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping, * case of a short-copy. */ if (!PageUptodate(pg)) { - mutex_lock(&f->sem); ret = jffs2_do_readpage_nolock(inode, pg); - mutex_unlock(&f->sem); if (ret) goto out_page; } + mutex_unlock(&f->sem); jffs2_dbg(1, "end write_begin(). pg->flags %lx\n", pg->flags); return ret; out_page: unlock_page(pg); page_cache_release(pg); + mutex_unlock(&f->sem); return ret; } diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c index 721d692fa8d4..6fcaeb8c902e 100644 --- a/fs/notify/fanotify/fanotify_user.c +++ b/fs/notify/fanotify/fanotify_user.c @@ -258,7 +258,8 @@ static ssize_t copy_event_to_user(struct fsnotify_group *group, if (ret) goto out_close_fd; - fd_install(fd, f); + if (fd != FAN_NOFD) + fd_install(fd, f); return fanotify_event_metadata.event_len; out_close_fd: diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index f27f01a98aa2..d83736fbc26c 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -1782,8 +1782,9 @@ int reiserfs_new_inode(struct reiserfs_transaction_handle *th, BUG_ON(!th->t_trans_id); - dquot_initialize(inode); + reiserfs_write_unlock(inode->i_sb); err = dquot_alloc_inode(inode); + reiserfs_write_lock(inode->i_sb); if (err) goto out_end_trans; if (!dir->i_nlink) { @@ -1979,8 +1980,10 @@ int reiserfs_new_inode(struct reiserfs_transaction_handle *th, out_end_trans: journal_end(th, th->t_super, th->t_blocks_allocated); + reiserfs_write_unlock(inode->i_sb); /* Drop can be outside and it needs more credits so it's better to have it outside */ dquot_drop(inode); + reiserfs_write_lock(inode->i_sb); inode->i_flags |= S_NOQUOTA; make_bad_inode(inode); @@ -3103,10 +3106,9 @@ int reiserfs_setattr(struct dentry *dentry, struct iattr *attr) /* must be turned off for recursive notify_change calls */ ia_valid = attr->ia_valid &= ~(ATTR_KILL_SUID|ATTR_KILL_SGID); - depth = reiserfs_write_lock_once(inode->i_sb); if (is_quota_modification(inode, attr)) dquot_initialize(inode); - + depth = reiserfs_write_lock_once(inode->i_sb); if (attr->ia_valid & ATTR_SIZE) { /* version 2 items will be caught by the s_maxbytes check ** done for us in vmtruncate @@ -3170,7 +3172,9 @@ int reiserfs_setattr(struct dentry *dentry, struct iattr *attr) error = journal_begin(&th, inode->i_sb, jbegin_count); if (error) goto out; + reiserfs_write_unlock_once(inode->i_sb, depth); error = dquot_transfer(inode, attr); + depth = reiserfs_write_lock_once(inode->i_sb); if (error) { journal_end(&th, inode->i_sb, jbegin_count); goto out; diff --git a/fs/reiserfs/stree.c b/fs/reiserfs/stree.c index f8afa4b162b8..2f40a4c70a4d 100644 --- a/fs/reiserfs/stree.c +++ b/fs/reiserfs/stree.c @@ -1968,7 +1968,9 @@ int reiserfs_paste_into_item(struct reiserfs_transaction_handle *th, struct tree key2type(&(key->on_disk_key))); #endif + reiserfs_write_unlock(inode->i_sb); retval = dquot_alloc_space_nodirty(inode, pasted_size); + reiserfs_write_lock(inode->i_sb); if (retval) { pathrelse(search_path); return retval; @@ -2061,9 +2063,11 @@ int reiserfs_insert_item(struct reiserfs_transaction_handle *th, "reiserquota insert_item(): allocating %u id=%u type=%c", quota_bytes, inode->i_uid, head2type(ih)); #endif + reiserfs_write_unlock(inode->i_sb); /* We can't dirty inode here. It would be immediately written but * appropriate stat item isn't inserted yet... */ retval = dquot_alloc_space_nodirty(inode, quota_bytes); + reiserfs_write_lock(inode->i_sb); if (retval) { pathrelse(path); return retval; diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index 1078ae179993..418bdc3a57da 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -298,7 +298,9 @@ static int finish_unfinished(struct super_block *s) retval = remove_save_link_only(s, &save_link_key, 0); continue; } + reiserfs_write_unlock(s); dquot_initialize(inode); + reiserfs_write_lock(s); if (truncate && S_ISDIR(inode->i_mode)) { /* We got a truncate request for a dir which is impossible. @@ -1335,7 +1337,7 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg) kfree(qf_names[i]); #endif err = -EINVAL; - goto out_err; + goto out_unlock; } #ifdef CONFIG_QUOTA handle_quota_files(s, qf_names, &qfmt); @@ -1379,7 +1381,7 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg) if (blocks) { err = reiserfs_resize(s, blocks); if (err != 0) - goto out_err; + goto out_unlock; } if (*mount_flags & MS_RDONLY) { @@ -1389,9 +1391,15 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg) /* it is read-only already */ goto out_ok; + /* + * Drop write lock. Quota will retake it when needed and lock + * ordering requires calling dquot_suspend() without it. + */ + reiserfs_write_unlock(s); err = dquot_suspend(s, -1); if (err < 0) goto out_err; + reiserfs_write_lock(s); /* try to remount file system with read-only permissions */ if (sb_umount_state(rs) == REISERFS_VALID_FS @@ -1401,7 +1409,7 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg) err = journal_begin(&th, s, 10); if (err) - goto out_err; + goto out_unlock; /* Mounting a rw partition read-only. */ reiserfs_prepare_for_journal(s, SB_BUFFER_WITH_SB(s), 1); @@ -1416,7 +1424,7 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg) if (reiserfs_is_journal_aborted(journal)) { err = journal->j_errno; - goto out_err; + goto out_unlock; } handle_data_mode(s, mount_options); @@ -1425,7 +1433,7 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg) s->s_flags &= ~MS_RDONLY; /* now it is safe to call journal_begin */ err = journal_begin(&th, s, 10); if (err) - goto out_err; + goto out_unlock; /* Mount a partition which is read-only, read-write */ reiserfs_prepare_for_journal(s, SB_BUFFER_WITH_SB(s), 1); @@ -1442,10 +1450,16 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg) SB_JOURNAL(s)->j_must_wait = 1; err = journal_end(&th, s, 10); if (err) - goto out_err; + goto out_unlock; if (!(*mount_flags & MS_RDONLY)) { + /* + * Drop write lock. Quota will retake it when needed and lock + * ordering requires calling dquot_resume() without it. + */ + reiserfs_write_unlock(s); dquot_resume(s, -1); + reiserfs_write_lock(s); finish_unfinished(s); reiserfs_xattr_init(s, *mount_flags); } @@ -1455,9 +1469,10 @@ out_ok: reiserfs_write_unlock(s); return 0; +out_unlock: + reiserfs_write_unlock(s); out_err: kfree(new_opts); - reiserfs_write_unlock(s); return err; } @@ -2095,13 +2110,15 @@ static int reiserfs_write_dquot(struct dquot *dquot) REISERFS_QUOTA_TRANS_BLOCKS(dquot->dq_sb)); if (ret) goto out; + reiserfs_write_unlock(dquot->dq_sb); ret = dquot_commit(dquot); + reiserfs_write_lock(dquot->dq_sb); err = journal_end(&th, dquot->dq_sb, REISERFS_QUOTA_TRANS_BLOCKS(dquot->dq_sb)); if (!ret && err) ret = err; - out: +out: reiserfs_write_unlock(dquot->dq_sb); return ret; } @@ -2117,13 +2134,15 @@ static int reiserfs_acquire_dquot(struct dquot *dquot) REISERFS_QUOTA_INIT_BLOCKS(dquot->dq_sb)); if (ret) goto out; + reiserfs_write_unlock(dquot->dq_sb); ret = dquot_acquire(dquot); + reiserfs_write_lock(dquot->dq_sb); err = journal_end(&th, dquot->dq_sb, REISERFS_QUOTA_INIT_BLOCKS(dquot->dq_sb)); if (!ret && err) ret = err; - out: +out: reiserfs_write_unlock(dquot->dq_sb); return ret; } @@ -2137,19 +2156,21 @@ static int reiserfs_release_dquot(struct dquot *dquot) ret = journal_begin(&th, dquot->dq_sb, REISERFS_QUOTA_DEL_BLOCKS(dquot->dq_sb)); + reiserfs_write_unlock(dquot->dq_sb); if (ret) { /* Release dquot anyway to avoid endless cycle in dqput() */ dquot_release(dquot); goto out; } ret = dquot_release(dquot); + reiserfs_write_lock(dquot->dq_sb); err = journal_end(&th, dquot->dq_sb, REISERFS_QUOTA_DEL_BLOCKS(dquot->dq_sb)); if (!ret && err) ret = err; - out: reiserfs_write_unlock(dquot->dq_sb); +out: return ret; } @@ -2174,11 +2195,13 @@ static int reiserfs_write_info(struct super_block *sb, int type) ret = journal_begin(&th, sb, 2); if (ret) goto out; + reiserfs_write_unlock(sb); ret = dquot_commit_info(sb, type); + reiserfs_write_lock(sb); err = journal_end(&th, sb, 2); if (!ret && err) ret = err; - out: +out: reiserfs_write_unlock(sb); return ret; } @@ -2203,8 +2226,11 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id, struct reiserfs_transaction_handle th; int opt = type == USRQUOTA ? REISERFS_USRQUOTA : REISERFS_GRPQUOTA; - if (!(REISERFS_SB(sb)->s_mount_opt & (1 << opt))) - return -EINVAL; + reiserfs_write_lock(sb); + if (!(REISERFS_SB(sb)->s_mount_opt & (1 << opt))) { + err = -EINVAL; + goto out; + } /* Quotafile not on the same filesystem? */ if (path->dentry->d_sb != sb) { @@ -2246,8 +2272,10 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id, if (err) goto out; } - err = dquot_quota_on(sb, type, format_id, path); + reiserfs_write_unlock(sb); + return dquot_quota_on(sb, type, format_id, path); out: + reiserfs_write_unlock(sb); return err; } @@ -2320,7 +2348,9 @@ static ssize_t reiserfs_quota_write(struct super_block *sb, int type, tocopy = sb->s_blocksize - offset < towrite ? sb->s_blocksize - offset : towrite; tmp_bh.b_state = 0; + reiserfs_write_lock(sb); err = reiserfs_get_block(inode, blk, &tmp_bh, GET_BLOCK_CREATE); + reiserfs_write_unlock(sb); if (err) goto out; if (offset || tocopy != sb->s_blocksize) @@ -2336,10 +2366,12 @@ static ssize_t reiserfs_quota_write(struct super_block *sb, int type, flush_dcache_page(bh->b_page); set_buffer_uptodate(bh); unlock_buffer(bh); + reiserfs_write_lock(sb); reiserfs_prepare_for_journal(sb, bh, 1); journal_mark_dirty(current->journal_info, sb, bh); if (!journal_quota) reiserfs_add_ordered_list(inode, bh); + reiserfs_write_unlock(sb); brelse(bh); offset = 0; towrite -= tocopy; diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c index e562dd43f41f..e57e2daa357c 100644 --- a/fs/xfs/xfs_aops.c +++ b/fs/xfs/xfs_aops.c @@ -481,11 +481,17 @@ static inline int bio_add_buffer(struct bio *bio, struct buffer_head *bh) * * The fix is two passes across the ioend list - one to start writeback on the * buffer_heads, and then submit them for I/O on the second pass. + * + * If @fail is non-zero, it means that we have a situation where some part of + * the submission process has failed after we have marked paged for writeback + * and unlocked them. In this situation, we need to fail the ioend chain rather + * than submit it to IO. This typically only happens on a filesystem shutdown. */ STATIC void xfs_submit_ioend( struct writeback_control *wbc, - xfs_ioend_t *ioend) + xfs_ioend_t *ioend, + int fail) { xfs_ioend_t *head = ioend; xfs_ioend_t *next; @@ -506,6 +512,18 @@ xfs_submit_ioend( next = ioend->io_list; bio = NULL; + /* + * If we are failing the IO now, just mark the ioend with an + * error and finish it. This will run IO completion immediately + * as there is only one reference to the ioend at this point in + * time. + */ + if (fail) { + ioend->io_error = -fail; + xfs_finish_ioend(ioend); + continue; + } + for (bh = ioend->io_buffer_head; bh; bh = bh->b_private) { if (!bio) { @@ -1060,7 +1078,18 @@ xfs_vm_writepage( xfs_start_page_writeback(page, 1, count); - if (ioend && imap_valid) { + /* if there is no IO to be submitted for this page, we are done */ + if (!ioend) + return 0; + + ASSERT(iohead); + + /* + * Any errors from this point onwards need tobe reported through the IO + * completion path as we have marked the initial page as under writeback + * and unlocked it. + */ + if (imap_valid) { xfs_off_t end_index; end_index = imap.br_startoff + imap.br_blockcount; @@ -1079,20 +1108,15 @@ xfs_vm_writepage( wbc, end_index); } - if (iohead) { - /* - * Reserve log space if we might write beyond the on-disk - * inode size. - */ - if (ioend->io_type != XFS_IO_UNWRITTEN && - xfs_ioend_is_append(ioend)) { - err = xfs_setfilesize_trans_alloc(ioend); - if (err) - goto error; - } - xfs_submit_ioend(wbc, iohead); - } + /* + * Reserve log space if we might write beyond the on-disk inode size. + */ + err = 0; + if (ioend->io_type != XFS_IO_UNWRITTEN && xfs_ioend_is_append(ioend)) + err = xfs_setfilesize_trans_alloc(ioend); + + xfs_submit_ioend(wbc, iohead, err); return 0; diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index d330111ca738..70eec1829776 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -1291,6 +1291,7 @@ xfs_attr_leaf_rebalance(xfs_da_state_t *state, xfs_da_state_blk_t *blk1, leaf2 = blk2->bp->b_addr; ASSERT(leaf1->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC)); ASSERT(leaf2->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC)); + ASSERT(leaf2->hdr.count == 0); args = state->args; trace_xfs_attr_leaf_rebalance(args); @@ -1361,6 +1362,7 @@ xfs_attr_leaf_rebalance(xfs_da_state_t *state, xfs_da_state_blk_t *blk1, * I assert that since all callers pass in an empty * second buffer, this code should never execute. */ + ASSERT(0); /* * Figure the total bytes to be added to the destination leaf. @@ -1422,10 +1424,24 @@ xfs_attr_leaf_rebalance(xfs_da_state_t *state, xfs_da_state_blk_t *blk1, args->index2 = 0; args->blkno2 = blk2->blkno; } else { + /* + * On a double leaf split, the original attr location + * is already stored in blkno2/index2, so don't + * overwrite it overwise we corrupt the tree. + */ blk2->index = blk1->index - be16_to_cpu(leaf1->hdr.count); - args->index = args->index2 = blk2->index; - args->blkno = args->blkno2 = blk2->blkno; + args->index = blk2->index; + args->blkno = blk2->blkno; + if (!state->extravalid) { + /* + * set the new attr location to match the old + * one and let the higher level split code + * decide where in the leaf to place it. + */ + args->index2 = blk2->index; + args->blkno2 = blk2->blkno; + } } } else { ASSERT(state->inleaf == 1); diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index 933b7930b863..4b0b8dd1b7b0 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -1197,9 +1197,14 @@ xfs_buf_bio_end_io( { xfs_buf_t *bp = (xfs_buf_t *)bio->bi_private; - xfs_buf_ioerror(bp, -error); + /* + * don't overwrite existing errors - otherwise we can lose errors on + * buffers that require multiple bios to complete. + */ + if (!bp->b_error) + xfs_buf_ioerror(bp, -error); - if (!error && xfs_buf_is_vmapped(bp) && (bp->b_flags & XBF_READ)) + if (!bp->b_error && xfs_buf_is_vmapped(bp) && (bp->b_flags & XBF_READ)) invalidate_kernel_vmap_range(bp->b_addr, xfs_buf_vmap_len(bp)); _xfs_buf_ioend(bp, 1); @@ -1279,6 +1284,11 @@ next_chunk: if (size) goto next_chunk; } else { + /* + * This is guaranteed not to be the last io reference count + * because the caller (xfs_buf_iorequest) holds a count itself. + */ + atomic_dec(&bp->b_io_remaining); xfs_buf_ioerror(bp, EIO); bio_put(bio); } diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index af1cbaf535ed..c5c35e629426 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -210,6 +210,7 @@ {0x1002, 0x6798, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6799, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ {0x1002, 0x679A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x679B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ {0x1002, 0x679E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ {0x1002, 0x679F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/include/linux/clk/zynq.h index 10343d1f87e1..56be7cd9aa8b 100644 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ b/include/linux/clk/zynq.h @@ -1,6 +1,5 @@ /* - * Copyright (C) 1999 ARM Limited - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2012 National Instruments * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -11,12 +10,15 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_MXC_TIMEX_H__ -#define __ASM_ARCH_MXC_TIMEX_H__ +#ifndef __LINUX_CLK_ZYNQ_H_ +#define __LINUX_CLK_ZYNQ_H_ -/* Bogus value */ -#define CLOCK_TICK_RATE 12345678 +void __init xilinx_zynq_clocks_init(void __iomem *slcr); -#endif /* __ASM_ARCH_MXC_TIMEX_H__ */ +#endif diff --git a/arch/arm/plat-mxc/include/mach/ipu.h b/include/linux/dma/ipu-dma.h index 539e559d18b2..18031115c668 100644 --- a/arch/arm/plat-mxc/include/mach/ipu.h +++ b/include/linux/dma/ipu-dma.h @@ -9,8 +9,8 @@ * published by the Free Software Foundation. */ -#ifndef _IPU_H_ -#define _IPU_H_ +#ifndef __LINUX_DMA_IPU_DMA_H +#define __LINUX_DMA_IPU_DMA_H #include <linux/types.h> #include <linux/dmaengine.h> @@ -174,4 +174,4 @@ struct idmac_channel { #define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd) #define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan) -#endif +#endif /* __LINUX_DMA_IPU_DMA_H */ diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h index df804ba73e0b..92a0dc75bc74 100644 --- a/include/linux/i2c-omap.h +++ b/include/linux/i2c-omap.h @@ -34,6 +34,7 @@ struct omap_i2c_bus_platform_data { u32 clkrate; u32 rev; u32 flags; + void (*set_mpu_wkup_lat)(struct device *dev, long set); }; #endif diff --git a/include/linux/of_address.h b/include/linux/of_address.h index e20e3af68fb6..0506eb53519b 100644 --- a/include/linux/of_address.h +++ b/include/linux/of_address.h @@ -42,10 +42,12 @@ static inline struct device_node *of_find_matching_node_by_address( { return NULL; } +#ifndef of_iomap static inline void __iomem *of_iomap(struct device_node *device, int index) { return NULL; } +#endif static inline const __be32 *of_get_address(struct device_node *dev, int index, u64 *size, unsigned int *flags) { diff --git a/include/linux/omap-dma.h b/include/linux/omap-dma.h index eb475a8ea25b..7af25a9c9c51 100644 --- a/include/linux/omap-dma.h +++ b/include/linux/omap-dma.h @@ -19,4 +19,370 @@ static inline bool omap_dma_filter_fn(struct dma_chan *c, void *d) } #endif +/* + * Legacy OMAP DMA handling defines and functions + * + * NOTE: Do not use these any longer. + * + * Use the generic dmaengine functions as defined in + * include/linux/dmaengine.h. + * + * Copyright (C) 2003 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * + */ + +#include <linux/platform_device.h> + +#define INT_DMA_LCD 25 + +#define OMAP1_DMA_TOUT_IRQ (1 << 0) +#define OMAP_DMA_DROP_IRQ (1 << 1) +#define OMAP_DMA_HALF_IRQ (1 << 2) +#define OMAP_DMA_FRAME_IRQ (1 << 3) +#define OMAP_DMA_LAST_IRQ (1 << 4) +#define OMAP_DMA_BLOCK_IRQ (1 << 5) +#define OMAP1_DMA_SYNC_IRQ (1 << 6) +#define OMAP2_DMA_PKT_IRQ (1 << 7) +#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8) +#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9) +#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) +#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) + +#define OMAP_DMA_CCR_EN (1 << 7) +#define OMAP_DMA_CCR_RD_ACTIVE (1 << 9) +#define OMAP_DMA_CCR_WR_ACTIVE (1 << 10) +#define OMAP_DMA_CCR_SEL_SRC_DST_SYNC (1 << 24) +#define OMAP_DMA_CCR_BUFFERING_DISABLE (1 << 25) + +#define OMAP_DMA_DATA_TYPE_S8 0x00 +#define OMAP_DMA_DATA_TYPE_S16 0x01 +#define OMAP_DMA_DATA_TYPE_S32 0x02 + +#define OMAP_DMA_SYNC_ELEMENT 0x00 +#define OMAP_DMA_SYNC_FRAME 0x01 +#define OMAP_DMA_SYNC_BLOCK 0x02 +#define OMAP_DMA_SYNC_PACKET 0x03 + +#define OMAP_DMA_DST_SYNC_PREFETCH 0x02 +#define OMAP_DMA_SRC_SYNC 0x01 +#define OMAP_DMA_DST_SYNC 0x00 + +#define OMAP_DMA_PORT_EMIFF 0x00 +#define OMAP_DMA_PORT_EMIFS 0x01 +#define OMAP_DMA_PORT_OCP_T1 0x02 +#define OMAP_DMA_PORT_TIPB 0x03 +#define OMAP_DMA_PORT_OCP_T2 0x04 +#define OMAP_DMA_PORT_MPUI 0x05 + +#define OMAP_DMA_AMODE_CONSTANT 0x00 +#define OMAP_DMA_AMODE_POST_INC 0x01 +#define OMAP_DMA_AMODE_SINGLE_IDX 0x02 +#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03 + +#define DMA_DEFAULT_FIFO_DEPTH 0x10 +#define DMA_DEFAULT_ARB_RATE 0x01 +/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */ +#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */ +#define DMA_THREAD_RESERVE_ONET (0x01 << 12) +#define DMA_THREAD_RESERVE_TWOT (0x02 << 12) +#define DMA_THREAD_RESERVE_THREET (0x03 << 12) +#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */ +#define DMA_THREAD_FIFO_75 (0x01 << 14) +#define DMA_THREAD_FIFO_25 (0x02 << 14) +#define DMA_THREAD_FIFO_50 (0x03 << 14) + +/* DMA4_OCP_SYSCONFIG bits */ +#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12) +#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8) +#define DMA_SYSCONFIG_EMUFREE (1 << 5) +#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3) +#define DMA_SYSCONFIG_SOFTRESET (1 << 2) +#define DMA_SYSCONFIG_AUTOIDLE (1 << 0) + +#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12) +#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3) + +#define DMA_IDLEMODE_SMARTIDLE 0x2 +#define DMA_IDLEMODE_NO_IDLE 0x1 +#define DMA_IDLEMODE_FORCE_IDLE 0x0 + +/* Chaining modes*/ +#ifndef CONFIG_ARCH_OMAP1 +#define OMAP_DMA_STATIC_CHAIN 0x1 +#define OMAP_DMA_DYNAMIC_CHAIN 0x2 +#define OMAP_DMA_CHAIN_ACTIVE 0x1 +#define OMAP_DMA_CHAIN_INACTIVE 0x0 +#endif + +#define DMA_CH_PRIO_HIGH 0x1 +#define DMA_CH_PRIO_LOW 0x0 /* Def */ + +/* Errata handling */ +#define IS_DMA_ERRATA(id) (errata & (id)) +#define SET_DMA_ERRATA(id) (errata |= (id)) + +#define DMA_ERRATA_IFRAME_BUFFERING BIT(0x0) +#define DMA_ERRATA_PARALLEL_CHANNELS BIT(0x1) +#define DMA_ERRATA_i378 BIT(0x2) +#define DMA_ERRATA_i541 BIT(0x3) +#define DMA_ERRATA_i88 BIT(0x4) +#define DMA_ERRATA_3_3 BIT(0x5) +#define DMA_ROMCODE_BUG BIT(0x6) + +/* Attributes for OMAP DMA Contrller */ +#define DMA_LINKED_LCH BIT(0x0) +#define GLOBAL_PRIORITY BIT(0x1) +#define RESERVE_CHANNEL BIT(0x2) +#define IS_CSSA_32 BIT(0x3) +#define IS_CDSA_32 BIT(0x4) +#define IS_RW_PRIORITY BIT(0x5) +#define ENABLE_1510_MODE BIT(0x6) +#define SRC_PORT BIT(0x7) +#define DST_PORT BIT(0x8) +#define SRC_INDEX BIT(0x9) +#define DST_INDEX BIT(0xa) +#define IS_BURST_ONLY4 BIT(0xb) +#define CLEAR_CSR_ON_READ BIT(0xc) +#define IS_WORD_16 BIT(0xd) +#define ENABLE_16XX_MODE BIT(0xe) +#define HS_CHANNELS_RESERVED BIT(0xf) + +/* Defines for DMA Capabilities */ +#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18) +#define DMA_HAS_CONSTANT_FILL_CAPS (0x1 << 19) +#define DMA_HAS_DESCRIPTOR_CAPS (0x3 << 20) + +enum omap_reg_offsets { + +GCR, GSCR, GRST1, HW_ID, +PCH2_ID, PCH0_ID, PCH1_ID, PCHG_ID, +PCHD_ID, CAPS_0, CAPS_1, CAPS_2, +CAPS_3, CAPS_4, PCH2_SR, PCH0_SR, +PCH1_SR, PCHD_SR, REVISION, IRQSTATUS_L0, +IRQSTATUS_L1, IRQSTATUS_L2, IRQSTATUS_L3, IRQENABLE_L0, +IRQENABLE_L1, IRQENABLE_L2, IRQENABLE_L3, SYSSTATUS, +OCP_SYSCONFIG, + +/* omap1+ specific */ +CPC, CCR2, LCH_CTRL, + +/* Common registers for all omap's */ +CSDP, CCR, CICR, CSR, +CEN, CFN, CSFI, CSEI, +CSAC, CDAC, CDEI, +CDFI, CLNK_CTRL, + +/* Channel specific registers */ +CSSA, CDSA, COLOR, +CCEN, CCFN, + +/* omap3630 and omap4 specific */ +CDP, CNDP, CCDN, + +}; + +enum omap_dma_burst_mode { + OMAP_DMA_DATA_BURST_DIS = 0, + OMAP_DMA_DATA_BURST_4, + OMAP_DMA_DATA_BURST_8, + OMAP_DMA_DATA_BURST_16, +}; + +enum end_type { + OMAP_DMA_LITTLE_ENDIAN = 0, + OMAP_DMA_BIG_ENDIAN +}; + +enum omap_dma_color_mode { + OMAP_DMA_COLOR_DIS = 0, + OMAP_DMA_CONSTANT_FILL, + OMAP_DMA_TRANSPARENT_COPY +}; + +enum omap_dma_write_mode { + OMAP_DMA_WRITE_NON_POSTED = 0, + OMAP_DMA_WRITE_POSTED, + OMAP_DMA_WRITE_LAST_NON_POSTED +}; + +enum omap_dma_channel_mode { + OMAP_DMA_LCH_2D = 0, + OMAP_DMA_LCH_G, + OMAP_DMA_LCH_P, + OMAP_DMA_LCH_PD +}; + +struct omap_dma_channel_params { + int data_type; /* data type 8,16,32 */ + int elem_count; /* number of elements in a frame */ + int frame_count; /* number of frames in a element */ + + int src_port; /* Only on OMAP1 REVISIT: Is this needed? */ + int src_amode; /* constant, post increment, indexed, + double indexed */ + unsigned long src_start; /* source address : physical */ + int src_ei; /* source element index */ + int src_fi; /* source frame index */ + + int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */ + int dst_amode; /* constant, post increment, indexed, + double indexed */ + unsigned long dst_start; /* source address : physical */ + int dst_ei; /* source element index */ + int dst_fi; /* source frame index */ + + int trigger; /* trigger attached if the channel is + synchronized */ + int sync_mode; /* sycn on element, frame , block or packet */ + int src_or_dst_synch; /* source synch(1) or destination synch(0) */ + + int ie; /* interrupt enabled */ + + unsigned char read_prio;/* read priority */ + unsigned char write_prio;/* write priority */ + +#ifndef CONFIG_ARCH_OMAP1 + enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */ +#endif +}; + +struct omap_dma_lch { + int next_lch; + int dev_id; + u16 saved_csr; + u16 enabled_irqs; + const char *dev_name; + void (*callback)(int lch, u16 ch_status, void *data); + void *data; + long flags; + /* required for Dynamic chaining */ + int prev_linked_ch; + int next_linked_ch; + int state; + int chain_id; + int status; +}; + +struct omap_dma_dev_attr { + u32 dev_caps; + u16 lch_count; + u16 chan_count; + struct omap_dma_lch *chan; +}; + +/* System DMA platform data structure */ +struct omap_system_dma_plat_info { + struct omap_dma_dev_attr *dma_attr; + u32 errata; + void (*disable_irq_lch)(int lch); + void (*show_dma_caps)(void); + void (*clear_lch_regs)(int lch); + void (*clear_dma)(int lch); + void (*dma_write)(u32 val, int reg, int lch); + u32 (*dma_read)(int reg, int lch); +}; + +#ifdef CONFIG_ARCH_OMAP2PLUS +#define dma_omap2plus() 1 +#else +#define dma_omap2plus() 0 #endif +#define dma_omap1() (!dma_omap2plus()) +#define dma_omap15xx() ((dma_omap1() && (d->dev_caps & ENABLE_1510_MODE))) +#define dma_omap16xx() ((dma_omap1() && (d->dev_caps & ENABLE_16XX_MODE))) + +extern void omap_set_dma_priority(int lch, int dst_port, int priority); +extern int omap_request_dma(int dev_id, const char *dev_name, + void (*callback)(int lch, u16 ch_status, void *data), + void *data, int *dma_ch); +extern void omap_enable_dma_irq(int ch, u16 irq_bits); +extern void omap_disable_dma_irq(int ch, u16 irq_bits); +extern void omap_free_dma(int ch); +extern void omap_start_dma(int lch); +extern void omap_stop_dma(int lch); +extern void omap_set_dma_transfer_params(int lch, int data_type, + int elem_count, int frame_count, + int sync_mode, + int dma_trigger, int src_or_dst_synch); +extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, + u32 color); +extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode); +extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode); + +extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, + unsigned long src_start, + int src_ei, int src_fi); +extern void omap_set_dma_src_index(int lch, int eidx, int fidx); +extern void omap_set_dma_src_data_pack(int lch, int enable); +extern void omap_set_dma_src_burst_mode(int lch, + enum omap_dma_burst_mode burst_mode); + +extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, + unsigned long dest_start, + int dst_ei, int dst_fi); +extern void omap_set_dma_dest_index(int lch, int eidx, int fidx); +extern void omap_set_dma_dest_data_pack(int lch, int enable); +extern void omap_set_dma_dest_burst_mode(int lch, + enum omap_dma_burst_mode burst_mode); + +extern void omap_set_dma_params(int lch, + struct omap_dma_channel_params *params); + +extern void omap_dma_link_lch(int lch_head, int lch_queue); +extern void omap_dma_unlink_lch(int lch_head, int lch_queue); + +extern int omap_set_dma_callback(int lch, + void (*callback)(int lch, u16 ch_status, void *data), + void *data); +extern dma_addr_t omap_get_dma_src_pos(int lch); +extern dma_addr_t omap_get_dma_dst_pos(int lch); +extern void omap_clear_dma(int lch); +extern int omap_get_dma_active_status(int lch); +extern int omap_dma_running(void); +extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth, + int tparams); +extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio, + unsigned char write_prio); +extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype); +extern void omap_set_dma_src_endian_type(int lch, enum end_type etype); +extern int omap_get_dma_index(int lch, int *ei, int *fi); + +void omap_dma_global_context_save(void); +void omap_dma_global_context_restore(void); + +extern void omap_dma_disable_irq(int lch); + +/* Chaining APIs */ +#ifndef CONFIG_ARCH_OMAP1 +extern int omap_request_dma_chain(int dev_id, const char *dev_name, + void (*callback) (int lch, u16 ch_status, + void *data), + int *chain_id, int no_of_chans, + int chain_mode, + struct omap_dma_channel_params params); +extern int omap_free_dma_chain(int chain_id); +extern int omap_dma_chain_a_transfer(int chain_id, int src_start, + int dest_start, int elem_count, + int frame_count, void *callbk_data); +extern int omap_start_dma_chain_transfers(int chain_id); +extern int omap_stop_dma_chain_transfers(int chain_id); +extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi); +extern int omap_get_dma_chain_dst_pos(int chain_id); +extern int omap_get_dma_chain_src_pos(int chain_id); + +extern int omap_modify_dma_chain_params(int chain_id, + struct omap_dma_channel_params params); +extern int omap_dma_chain_status(int chain_id); +#endif + +#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP) +#include <mach/lcd_dma.h> +#else +static inline int omap_lcd_dma_running(void) +{ + return 0; +} +#endif + +#endif /* __LINUX_OMAP_DMA_H */ diff --git a/include/linux/platform_data/asoc-imx-ssi.h b/include/linux/platform_data/asoc-imx-ssi.h index 63f3c2804239..92c7fd72f636 100644 --- a/include/linux/platform_data/asoc-imx-ssi.h +++ b/include/linux/platform_data/asoc-imx-ssi.h @@ -17,5 +17,7 @@ struct imx_ssi_platform_data { void (*ac97_warm_reset)(struct snd_ac97 *ac97); }; +extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type); + #endif /* __MACH_SSI_H */ diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index 1b9080385b46..f6d30cc1cb77 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -61,7 +61,9 @@ static inline int imx_dma_is_ipu(struct dma_chan *chan) static inline int imx_dma_is_general_purpose(struct dma_chan *chan) { return strstr(dev_name(chan->device->dev), "sdma") || - !strcmp(dev_name(chan->device->dev), "imx-dma"); + !strcmp(dev_name(chan->device->dev), "imx1-dma") || + !strcmp(dev_name(chan->device->dev), "imx21-dma") || + !strcmp(dev_name(chan->device->dev), "imx27-dma"); } #endif diff --git a/include/linux/platform_data/dmtimer-omap.h b/include/linux/platform_data/dmtimer-omap.h new file mode 100644 index 000000000000..a19b78d826e9 --- /dev/null +++ b/include/linux/platform_data/dmtimer-omap.h @@ -0,0 +1,31 @@ +/* + * DMTIMER platform data for TI OMAP platforms + * + * Copyright (C) 2012 Texas Instruments + * Author: Jon Hunter <jon-hunter@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __PLATFORM_DATA_DMTIMER_OMAP_H__ +#define __PLATFORM_DATA_DMTIMER_OMAP_H__ + +struct dmtimer_platform_data { + /* set_timer_src - Only used for OMAP1 devices */ + int (*set_timer_src)(struct platform_device *pdev, int source); + u32 timer_capability; + u32 timer_errata; + int (*get_context_loss_count)(struct device *); +}; + +#endif /* __PLATFORM_DATA_DMTIMER_OMAP_H__ */ diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h index e8741c2678d5..5d50b25a73d7 100644 --- a/include/linux/platform_data/gpio-omap.h +++ b/include/linux/platform_data/gpio-omap.h @@ -26,7 +26,6 @@ #include <linux/io.h> #include <linux/platform_device.h> -#include <mach/irqs.h> #define OMAP1_MPUIO_BASE 0xfffb5000 diff --git a/include/linux/platform_data/uio_pruss.h b/include/linux/platform_data/uio_pruss.h index f39140aabc6f..3d47d219827f 100644 --- a/include/linux/platform_data/uio_pruss.h +++ b/include/linux/platform_data/uio_pruss.h @@ -20,6 +20,7 @@ /* To configure the PRUSS INTC base offset for UIO driver */ struct uio_pruss_pdata { - u32 pintc_base; + u32 pintc_base; + struct gen_pool *sram_pool; }; #endif /* _UIO_PRUSS_H_ */ diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index c64de9dd7631..2f694f3846a9 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -46,8 +46,9 @@ struct ads7846_platform_data { u16 debounce_rep; /* additional consecutive good readings * required after the first two */ int gpio_pendown; /* the GPIO used to decide the pendown - * state if get_pendown_state == NULL - */ + * state if get_pendown_state == NULL */ + int gpio_pendown_debounce; /* platform specific debounce time for + * the gpio_pendown */ int (*get_pendown_state)(void); int (*filter_init) (const struct ads7846_platform_data *pdata, void **filter_data); diff --git a/arch/arm/mach-tegra/include/mach/tegra-ahb.h b/include/linux/tegra-ahb.h index e0f8c84b1d8c..f1cd075ceee1 100644 --- a/arch/arm/mach-tegra/include/mach/tegra-ahb.h +++ b/include/linux/tegra-ahb.h @@ -11,9 +11,9 @@ * more details. */ -#ifndef __MACH_TEGRA_AHB_H__ -#define __MACH_TEGRA_AHB_H__ +#ifndef __LINUX_AHB_H__ +#define __LINUX_AHB_H__ extern int tegra_ahb_enable_smmu(struct device_node *ahb); -#endif /* __MACH_TEGRA_AHB_H__ */ +#endif /* __LINUX_AHB_H__ */ diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 6f0ba01afe73..63445ede48bb 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1351,7 +1351,7 @@ struct xfrm6_tunnel { }; extern void xfrm_init(void); -extern void xfrm4_init(int rt_hash_size); +extern void xfrm4_init(void); extern int xfrm_state_init(struct net *net); extern void xfrm_state_fini(struct net *net); extern void xfrm4_state_init(void); diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 88fae8d20154..55367b04dc94 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -135,6 +135,8 @@ struct scsi_device { * because we did a bus reset. */ unsigned use_10_for_rw:1; /* first try 10-byte read / write */ unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */ + unsigned no_report_opcodes:1; /* no REPORT SUPPORTED OPERATION CODES */ + unsigned no_write_same:1; /* no WRITE SAME command */ unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */ unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */ unsigned skip_vpd_pages:1; /* do not read VPD pages */ @@ -362,6 +364,8 @@ extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries, struct scsi_sense_hdr *sshdr); extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf, int buf_len); +extern int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer, + unsigned int len, unsigned char opcode); extern int scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state); extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type, diff --git a/lib/mpi/longlong.h b/lib/mpi/longlong.h index 678ce4f1e124..095ab157a521 100644 --- a/lib/mpi/longlong.h +++ b/lib/mpi/longlong.h @@ -641,7 +641,14 @@ do { \ ************** MIPS ***************** ***************************************/ #if defined(__mips__) && W_TYPE_SIZE == 32 -#if __GNUC__ > 2 || __GNUC_MINOR__ >= 7 +#if __GNUC__ >= 4 && __GNUC_MINOR__ >= 4 +#define umul_ppmm(w1, w0, u, v) \ +do { \ + UDItype __ll = (UDItype)(u) * (v); \ + w1 = __ll >> 32; \ + w0 = __ll; \ +} while (0) +#elif __GNUC__ > 2 || __GNUC_MINOR__ >= 7 #define umul_ppmm(w1, w0, u, v) \ __asm__ ("multu %2,%3" \ : "=l" ((USItype)(w0)), \ @@ -666,7 +673,15 @@ do { \ ************** MIPS/64 ************** ***************************************/ #if (defined(__mips) && __mips >= 3) && W_TYPE_SIZE == 64 -#if __GNUC__ > 2 || __GNUC_MINOR__ >= 7 +#if __GNUC__ >= 4 && __GNUC_MINOR__ >= 4 +#define umul_ppmm(w1, w0, u, v) \ +do { \ + typedef unsigned int __ll_UTItype __attribute__((mode(TI))); \ + __ll_UTItype __ll = (__ll_UTItype)(u) * (v); \ + w1 = __ll >> 64; \ + w0 = __ll; \ +} while (0) +#elif __GNUC__ > 2 || __GNUC_MINOR__ >= 7 #define umul_ppmm(w1, w0, u, v) \ __asm__ ("dmultu %2,%3" \ : "=l" ((UDItype)(w0)), \ diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 7bb35ac0964a..bcb72c6e2b2d 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1405,7 +1405,7 @@ int capture_free_page(struct page *page, int alloc_order, int migratetype) mt = get_pageblock_migratetype(page); if (unlikely(mt != MIGRATE_ISOLATE)) - __mod_zone_freepage_state(zone, -(1UL << order), mt); + __mod_zone_freepage_state(zone, -(1UL << alloc_order), mt); if (alloc_order != order) expand(zone, page, alloc_order, order, diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index bcf02f608cbf..017a8bacfb27 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -429,6 +429,17 @@ static struct attribute_group netstat_group = { .name = "statistics", .attrs = netstat_attrs, }; + +#if IS_ENABLED(CONFIG_WIRELESS_EXT) || IS_ENABLED(CONFIG_CFG80211) +static struct attribute *wireless_attrs[] = { + NULL +}; + +static struct attribute_group wireless_group = { + .name = "wireless", + .attrs = wireless_attrs, +}; +#endif #endif /* CONFIG_SYSFS */ #ifdef CONFIG_RPS @@ -1409,6 +1420,15 @@ int netdev_register_kobject(struct net_device *net) groups++; *groups++ = &netstat_group; + +#if IS_ENABLED(CONFIG_WIRELESS_EXT) || IS_ENABLED(CONFIG_CFG80211) + if (net->ieee80211_ptr) + *groups++ = &wireless_group; +#if IS_ENABLED(CONFIG_WIRELESS_EXT) + else if (net->wireless_handlers) + *groups++ = &wireless_group; +#endif +#endif #endif /* CONFIG_SYSFS */ error = device_add(dev); diff --git a/net/ipv4/route.c b/net/ipv4/route.c index a8c651216fa6..df251424d816 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1785,6 +1785,7 @@ static struct rtable *__mkroute_output(const struct fib_result *res, if (dev_out->flags & IFF_LOOPBACK) flags |= RTCF_LOCAL; + do_cache = true; if (type == RTN_BROADCAST) { flags |= RTCF_BROADCAST | RTCF_LOCAL; fi = NULL; @@ -1793,6 +1794,8 @@ static struct rtable *__mkroute_output(const struct fib_result *res, if (!ip_check_mc_rcu(in_dev, fl4->daddr, fl4->saddr, fl4->flowi4_proto)) flags &= ~RTCF_LOCAL; + else + do_cache = false; /* If multicast route do not exist use * default one, but do not gateway in this case. * Yes, it is hack. @@ -1802,8 +1805,8 @@ static struct rtable *__mkroute_output(const struct fib_result *res, } fnhe = NULL; - do_cache = fi != NULL; - if (fi) { + do_cache &= fi != NULL; + if (do_cache) { struct rtable __rcu **prth; struct fib_nh *nh = &FIB_RES_NH(*res); @@ -2597,7 +2600,7 @@ int __init ip_rt_init(void) pr_err("Unable to create route proc files\n"); #ifdef CONFIG_XFRM xfrm_init(); - xfrm4_init(ip_rt_max_size); + xfrm4_init(); #endif rtnl_register(PF_INET, RTM_GETROUTE, inet_rtm_getroute, NULL, NULL); diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c index 05c5ab8d983c..3be0ac2c1920 100644 --- a/net/ipv4/xfrm4_policy.c +++ b/net/ipv4/xfrm4_policy.c @@ -279,19 +279,8 @@ static void __exit xfrm4_policy_fini(void) xfrm_policy_unregister_afinfo(&xfrm4_policy_afinfo); } -void __init xfrm4_init(int rt_max_size) +void __init xfrm4_init(void) { - /* - * Select a default value for the gc_thresh based on the main route - * table hash size. It seems to me the worst case scenario is when - * we have ipsec operating in transport mode, in which we create a - * dst_entry per socket. The xfrm gc algorithm starts trying to remove - * entries at gc_thresh, and prevents new allocations as 2*gc_thresh - * so lets set an initial xfrm gc_thresh value at the rt_max_size/2. - * That will let us store an ipsec connection per route table entry, - * and start cleaning when were 1/2 full - */ - xfrm4_dst_ops.gc_thresh = rt_max_size/2; dst_entries_init(&xfrm4_dst_ops); xfrm4_state_init(); diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c index c4f934176cab..30647857a375 100644 --- a/net/ipv6/inet6_connection_sock.c +++ b/net/ipv6/inet6_connection_sock.c @@ -252,6 +252,7 @@ struct dst_entry *inet6_csk_update_pmtu(struct sock *sk, u32 mtu) return NULL; dst->ops->update_pmtu(dst, sk, NULL, mtu); - return inet6_csk_route_socket(sk, &fl6); + dst = inet6_csk_route_socket(sk, &fl6); + return IS_ERR(dst) ? NULL : dst; } EXPORT_SYMBOL_GPL(inet6_csk_update_pmtu); diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index bf87c70ac6c5..c21e33d1abd0 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -1151,10 +1151,6 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) mutex_lock(&sdata->u.ibss.mtx); - sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH; - memset(sdata->u.ibss.bssid, 0, ETH_ALEN); - sdata->u.ibss.ssid_len = 0; - active_ibss = ieee80211_sta_active_ibss(sdata); if (!active_ibss && !is_zero_ether_addr(ifibss->bssid)) { @@ -1175,6 +1171,10 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) } } + ifibss->state = IEEE80211_IBSS_MLME_SEARCH; + memset(ifibss->bssid, 0, ETH_ALEN); + ifibss->ssid_len = 0; + sta_info_flush(sdata->local, sdata); spin_lock_bh(&ifibss->incomplete_lock); diff --git a/net/netfilter/ipset/ip_set_hash_ip.c b/net/netfilter/ipset/ip_set_hash_ip.c index ec3dba5dcd62..5c0b78528e55 100644 --- a/net/netfilter/ipset/ip_set_hash_ip.c +++ b/net/netfilter/ipset/ip_set_hash_ip.c @@ -173,6 +173,7 @@ hash_ip4_uadt(struct ip_set *set, struct nlattr *tb[], return adtfn(set, &nip, timeout, flags); } + ip_to = ip; if (tb[IPSET_ATTR_IP_TO]) { ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to); if (ret) @@ -185,8 +186,7 @@ hash_ip4_uadt(struct ip_set *set, struct nlattr *tb[], if (!cidr || cidr > 32) return -IPSET_ERR_INVALID_CIDR; ip_set_mask_from_to(ip, ip_to, cidr); - } else - ip_to = ip; + } hosts = h->netmask == 32 ? 1 : 2 << (32 - h->netmask - 1); diff --git a/net/netfilter/ipset/ip_set_hash_ipport.c b/net/netfilter/ipset/ip_set_hash_ipport.c index 0171f7502fa5..6283351f4eeb 100644 --- a/net/netfilter/ipset/ip_set_hash_ipport.c +++ b/net/netfilter/ipset/ip_set_hash_ipport.c @@ -162,7 +162,7 @@ hash_ipport4_uadt(struct ip_set *set, struct nlattr *tb[], const struct ip_set_hash *h = set->data; ipset_adtfn adtfn = set->variant->adt[adt]; struct hash_ipport4_elem data = { }; - u32 ip, ip_to = 0, p = 0, port, port_to; + u32 ip, ip_to, p = 0, port, port_to; u32 timeout = h->timeout; bool with_ports = false; int ret; @@ -210,7 +210,7 @@ hash_ipport4_uadt(struct ip_set *set, struct nlattr *tb[], return ip_set_eexist(ret, flags) ? 0 : ret; } - ip = ntohl(data.ip); + ip_to = ip = ntohl(data.ip); if (tb[IPSET_ATTR_IP_TO]) { ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to); if (ret) @@ -223,8 +223,7 @@ hash_ipport4_uadt(struct ip_set *set, struct nlattr *tb[], if (!cidr || cidr > 32) return -IPSET_ERR_INVALID_CIDR; ip_set_mask_from_to(ip, ip_to, cidr); - } else - ip_to = ip; + } port_to = port = ntohs(data.port); if (with_ports && tb[IPSET_ATTR_PORT_TO]) { diff --git a/net/netfilter/ipset/ip_set_hash_ipportip.c b/net/netfilter/ipset/ip_set_hash_ipportip.c index 6344ef551ec8..6a21271c8d5a 100644 --- a/net/netfilter/ipset/ip_set_hash_ipportip.c +++ b/net/netfilter/ipset/ip_set_hash_ipportip.c @@ -166,7 +166,7 @@ hash_ipportip4_uadt(struct ip_set *set, struct nlattr *tb[], const struct ip_set_hash *h = set->data; ipset_adtfn adtfn = set->variant->adt[adt]; struct hash_ipportip4_elem data = { }; - u32 ip, ip_to = 0, p = 0, port, port_to; + u32 ip, ip_to, p = 0, port, port_to; u32 timeout = h->timeout; bool with_ports = false; int ret; @@ -218,7 +218,7 @@ hash_ipportip4_uadt(struct ip_set *set, struct nlattr *tb[], return ip_set_eexist(ret, flags) ? 0 : ret; } - ip = ntohl(data.ip); + ip_to = ip = ntohl(data.ip); if (tb[IPSET_ATTR_IP_TO]) { ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to); if (ret) @@ -231,8 +231,7 @@ hash_ipportip4_uadt(struct ip_set *set, struct nlattr *tb[], if (!cidr || cidr > 32) return -IPSET_ERR_INVALID_CIDR; ip_set_mask_from_to(ip, ip_to, cidr); - } else - ip_to = ip; + } port_to = port = ntohs(data.port); if (with_ports && tb[IPSET_ATTR_PORT_TO]) { diff --git a/net/netfilter/ipset/ip_set_hash_ipportnet.c b/net/netfilter/ipset/ip_set_hash_ipportnet.c index cb71f9a774e7..2d5cd4ee30eb 100644 --- a/net/netfilter/ipset/ip_set_hash_ipportnet.c +++ b/net/netfilter/ipset/ip_set_hash_ipportnet.c @@ -215,8 +215,8 @@ hash_ipportnet4_uadt(struct ip_set *set, struct nlattr *tb[], const struct ip_set_hash *h = set->data; ipset_adtfn adtfn = set->variant->adt[adt]; struct hash_ipportnet4_elem data = { .cidr = HOST_MASK - 1 }; - u32 ip, ip_to = 0, p = 0, port, port_to; - u32 ip2_from = 0, ip2_to, ip2_last, ip2; + u32 ip, ip_to, p = 0, port, port_to; + u32 ip2_from, ip2_to, ip2_last, ip2; u32 timeout = h->timeout; bool with_ports = false; u8 cidr; @@ -286,6 +286,7 @@ hash_ipportnet4_uadt(struct ip_set *set, struct nlattr *tb[], return ip_set_eexist(ret, flags) ? 0 : ret; } + ip_to = ip; if (tb[IPSET_ATTR_IP_TO]) { ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to); if (ret) @@ -306,6 +307,8 @@ hash_ipportnet4_uadt(struct ip_set *set, struct nlattr *tb[], if (port > port_to) swap(port, port_to); } + + ip2_to = ip2_from; if (tb[IPSET_ATTR_IP2_TO]) { ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP2_TO], &ip2_to); if (ret) diff --git a/net/netfilter/nfnetlink_cttimeout.c b/net/netfilter/nfnetlink_cttimeout.c index 8847b4d8be06..701c88a20fea 100644 --- a/net/netfilter/nfnetlink_cttimeout.c +++ b/net/netfilter/nfnetlink_cttimeout.c @@ -41,7 +41,8 @@ MODULE_DESCRIPTION("cttimeout: Extended Netfilter Connection Tracking timeout tu static LIST_HEAD(cttimeout_list); static const struct nla_policy cttimeout_nla_policy[CTA_TIMEOUT_MAX+1] = { - [CTA_TIMEOUT_NAME] = { .type = NLA_NUL_STRING }, + [CTA_TIMEOUT_NAME] = { .type = NLA_NUL_STRING, + .len = CTNL_TIMEOUT_NAME_MAX - 1}, [CTA_TIMEOUT_L3PROTO] = { .type = NLA_U16 }, [CTA_TIMEOUT_L4PROTO] = { .type = NLA_U8 }, [CTA_TIMEOUT_DATA] = { .type = NLA_NESTED }, diff --git a/net/nfc/llcp/llcp.c b/net/nfc/llcp/llcp.c index cc10d073c338..9e8f4b2801f6 100644 --- a/net/nfc/llcp/llcp.c +++ b/net/nfc/llcp/llcp.c @@ -1210,7 +1210,7 @@ int nfc_llcp_register_device(struct nfc_dev *ndev) local->remote_miu = LLCP_DEFAULT_MIU; local->remote_lto = LLCP_DEFAULT_LTO; - list_add(&llcp_devices, &local->list); + list_add(&local->list, &llcp_devices); return 0; } diff --git a/scripts/sign-file b/scripts/sign-file index 87ca59d36e7e..974a20b661b7 100755 --- a/scripts/sign-file +++ b/scripts/sign-file @@ -156,12 +156,12 @@ sub asn1_extract($$@) if ($l == 0x1) { $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1)); - } elsif ($l = 0x2) { + } elsif ($l == 0x2) { $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0], 2)); - } elsif ($l = 0x3) { + } elsif ($l == 0x3) { $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1)) << 16; $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0] + 1, 2)); - } elsif ($l = 0x4) { + } elsif ($l == 0x4) { $len = unpack("N", substr(${$cursor->[2]}, $cursor->[0], 4)); } else { die $x509, ": ", $cursor->[0], ": ASN.1 element too long (", $l, ")\n"; diff --git a/security/selinux/netnode.c b/security/selinux/netnode.c index 28f911cdd7c7..c5454c0477c3 100644 --- a/security/selinux/netnode.c +++ b/security/selinux/netnode.c @@ -174,7 +174,8 @@ static void sel_netnode_insert(struct sel_netnode *node) if (sel_netnode_hash[idx].size == SEL_NETNODE_HASH_BKT_LIMIT) { struct sel_netnode *tail; tail = list_entry( - rcu_dereference(sel_netnode_hash[idx].list.prev), + rcu_dereference_protected(sel_netnode_hash[idx].list.prev, + lockdep_is_held(&sel_netnode_lock)), struct sel_netnode, list); list_del_rcu(&tail->list); kfree_rcu(tail, rcu); diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 70d4848b5cd0..d010de12335e 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -95,6 +95,7 @@ int snd_hda_delete_codec_preset(struct hda_codec_preset_list *preset) EXPORT_SYMBOL_HDA(snd_hda_delete_codec_preset); #ifdef CONFIG_PM +#define codec_in_pm(codec) ((codec)->in_pm) static void hda_power_work(struct work_struct *work); static void hda_keep_power_on(struct hda_codec *codec); #define hda_codec_is_power_on(codec) ((codec)->power_on) @@ -104,6 +105,7 @@ static inline void hda_call_pm_notify(struct hda_bus *bus, bool power_up) bus->ops.pm_notify(bus, power_up); } #else +#define codec_in_pm(codec) 0 static inline void hda_keep_power_on(struct hda_codec *codec) {} #define hda_codec_is_power_on(codec) 1 #define hda_call_pm_notify(bus, state) {} @@ -228,7 +230,7 @@ static int codec_exec_verb(struct hda_codec *codec, unsigned int cmd, } mutex_unlock(&bus->cmd_mutex); snd_hda_power_down(codec); - if (res && *res == -1 && bus->rirb_error) { + if (!codec_in_pm(codec) && res && *res == -1 && bus->rirb_error) { if (bus->response_reset) { snd_printd("hda_codec: resetting BUS due to " "fatal communication error\n"); @@ -238,7 +240,7 @@ static int codec_exec_verb(struct hda_codec *codec, unsigned int cmd, goto again; } /* clear reset-flag when the communication gets recovered */ - if (!err) + if (!err || codec_in_pm(codec)) bus->response_reset = 0; return err; } @@ -3616,6 +3618,8 @@ static unsigned int hda_call_codec_suspend(struct hda_codec *codec, bool in_wq) { unsigned int state; + codec->in_pm = 1; + if (codec->patch_ops.suspend) codec->patch_ops.suspend(codec); hda_cleanup_all_streams(codec); @@ -3630,6 +3634,7 @@ static unsigned int hda_call_codec_suspend(struct hda_codec *codec, bool in_wq) codec->power_transition = 0; codec->power_jiffies = jiffies; spin_unlock(&codec->power_lock); + codec->in_pm = 0; return state; } @@ -3638,6 +3643,8 @@ static unsigned int hda_call_codec_suspend(struct hda_codec *codec, bool in_wq) */ static void hda_call_codec_resume(struct hda_codec *codec) { + codec->in_pm = 1; + /* set as if powered on for avoiding re-entering the resume * in the resume / power-save sequence */ @@ -3656,6 +3663,8 @@ static void hda_call_codec_resume(struct hda_codec *codec) snd_hda_codec_resume_cache(codec); } snd_hda_jack_report_sync(codec); + + codec->in_pm = 0; snd_hda_power_down(codec); /* flag down before returning */ } #endif /* CONFIG_PM */ diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 507fe8a917b6..4f4e545c0f4b 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -869,6 +869,7 @@ struct hda_codec { unsigned int power_on :1; /* current (global) power-state */ unsigned int d3_stop_clk:1; /* support D3 operation without BCLK */ unsigned int pm_down_notified:1; /* PM notified to controller */ + unsigned int in_pm:1; /* suspend/resume being performed */ int power_transition; /* power-state in transition */ int power_count; /* current (global) power refcount */ struct delayed_work power_work; /* delayed task for powerdown */ diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index cd2dbaf1be78..f9d870e554d9 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -556,6 +556,12 @@ enum { #define AZX_DCAPS_ALIGN_BUFSIZE (1 << 22) /* buffer size alignment */ #define AZX_DCAPS_4K_BDLE_BOUNDARY (1 << 23) /* BDLE in 4k boundary */ #define AZX_DCAPS_COUNT_LPIB_DELAY (1 << 25) /* Take LPIB as delay */ +#define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */ + +/* quirks for Intel PCH */ +#define AZX_DCAPS_INTEL_PCH \ + (AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | \ + AZX_DCAPS_COUNT_LPIB_DELAY | AZX_DCAPS_PM_RUNTIME) /* quirks for ATI SB / AMD Hudson */ #define AZX_DCAPS_PRESET_ATI_SB \ @@ -2433,6 +2439,9 @@ static void azx_power_notify(struct hda_bus *bus, bool power_up) { struct azx *chip = bus->private_data; + if (!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME)) + return; + if (power_up) pm_runtime_get_sync(&chip->pci->dev); else @@ -2548,7 +2557,8 @@ static int azx_runtime_suspend(struct device *dev) struct snd_card *card = dev_get_drvdata(dev); struct azx *chip = card->private_data; - if (!power_save_controller) + if (!power_save_controller || + !(chip->driver_caps & AZX_DCAPS_PM_RUNTIME)) return -EAGAIN; azx_stop_chip(chip); @@ -3429,39 +3439,30 @@ static void __devexit azx_remove(struct pci_dev *pci) static DEFINE_PCI_DEVICE_TABLE(azx_ids) = { /* CPT */ { PCI_DEVICE(0x8086, 0x1c20), - .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP | - AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY }, + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH }, /* PBG */ { PCI_DEVICE(0x8086, 0x1d20), - .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP | - AZX_DCAPS_BUFSIZE}, + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH }, /* Panther Point */ { PCI_DEVICE(0x8086, 0x1e20), - .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP | - AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY }, + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH }, /* Lynx Point */ { PCI_DEVICE(0x8086, 0x8c20), - .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP | - AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY }, + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH }, /* Lynx Point-LP */ { PCI_DEVICE(0x8086, 0x9c20), - .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP | - AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY }, + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH }, /* Lynx Point-LP */ { PCI_DEVICE(0x8086, 0x9c21), - .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP | - AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY }, + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH }, /* Haswell */ { PCI_DEVICE(0x8086, 0x0c0c), - .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP | - AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY }, + .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH }, { PCI_DEVICE(0x8086, 0x0d0c), - .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP | - AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY }, + .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH }, /* 5 Series/3400 */ { PCI_DEVICE(0x8086, 0x3b56), - .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP | - AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY }, + .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH }, /* SCH */ { PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP | diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index d5f3a26d608d..3bcb67172358 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -466,6 +466,7 @@ static int parse_output(struct hda_codec *codec) memcpy(cfg->speaker_pins, cfg->line_out_pins, sizeof(cfg->speaker_pins)); cfg->line_outs = 0; + memset(cfg->line_out_pins, 0, sizeof(cfg->line_out_pins)); } return 0; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 68fd49294b26..ad68d223f8af 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7065,6 +7065,7 @@ static const struct hda_codec_preset snd_hda_preset_realtek[] = { { .id = 0x10ec0282, .name = "ALC282", .patch = patch_alc269 }, { .id = 0x10ec0283, .name = "ALC283", .patch = patch_alc269 }, { .id = 0x10ec0290, .name = "ALC290", .patch = patch_alc269 }, + { .id = 0x10ec0292, .name = "ALC292", .patch = patch_alc269 }, { .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660", .patch = patch_alc861 }, { .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd }, diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c index c03b65af3059..054967d8bac2 100644 --- a/sound/soc/codecs/arizona.c +++ b/sound/soc/codecs/arizona.c @@ -268,7 +268,7 @@ EXPORT_SYMBOL_GPL(arizona_out_ev); static unsigned int arizona_sysclk_48k_rates[] = { 6144000, 12288000, - 22579200, + 24576000, 49152000, 73728000, 98304000, @@ -278,7 +278,7 @@ static unsigned int arizona_sysclk_48k_rates[] = { static unsigned int arizona_sysclk_44k1_rates[] = { 5644800, 11289600, - 24576000, + 22579200, 45158400, 67737600, 90316800, diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c index f994af34f552..e3f0a7f3131e 100644 --- a/sound/soc/codecs/cs4271.c +++ b/sound/soc/codecs/cs4271.c @@ -485,7 +485,7 @@ static int cs4271_probe(struct snd_soc_codec *codec) gpio_nreset = cs4271plat->gpio_nreset; if (gpio_nreset >= 0) - if (gpio_request(gpio_nreset, "CS4271 Reset")) + if (devm_gpio_request(codec->dev, gpio_nreset, "CS4271 Reset")) gpio_nreset = -EINVAL; if (gpio_nreset >= 0) { /* Reset codec */ @@ -535,15 +535,10 @@ static int cs4271_probe(struct snd_soc_codec *codec) static int cs4271_remove(struct snd_soc_codec *codec) { struct cs4271_private *cs4271 = snd_soc_codec_get_drvdata(codec); - int gpio_nreset; - gpio_nreset = cs4271->gpio_nreset; - - if (gpio_is_valid(gpio_nreset)) { + if (gpio_is_valid(cs4271->gpio_nreset)) /* Set codec to the reset state */ - gpio_set_value(gpio_nreset, 0); - gpio_free(gpio_nreset); - } + gpio_set_value(cs4271->gpio_nreset, 0); return 0; }; diff --git a/sound/soc/fsl/imx-pcm-fiq.c b/sound/soc/fsl/imx-pcm-fiq.c index 22c6130957ba..9ffc9e66308f 100644 --- a/sound/soc/fsl/imx-pcm-fiq.c +++ b/sound/soc/fsl/imx-pcm-fiq.c @@ -29,7 +29,6 @@ #include <asm/fiq.h> -#include <mach/irqs.h> #include <linux/platform_data/asoc-imx-ssi.h> #include "imx-ssi.h" diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c index 006f7d465ed2..dd566444e3c3 100644 --- a/sound/soc/fsl/imx-ssi.c +++ b/sound/soc/fsl/imx-ssi.c @@ -48,7 +48,6 @@ #include <sound/soc.h> #include <linux/platform_data/asoc-imx-ssi.h> -#include <mach/hardware.h> #include "imx-ssi.h" diff --git a/sound/soc/kirkwood/kirkwood-dma.c b/sound/soc/kirkwood/kirkwood-dma.c index b9f16598324c..2ba08148655f 100644 --- a/sound/soc/kirkwood/kirkwood-dma.c +++ b/sound/soc/kirkwood/kirkwood-dma.c @@ -71,7 +71,6 @@ static irqreturn_t kirkwood_dma_irq(int irq, void *dev_id) printk(KERN_WARNING "%s: got err interrupt 0x%lx\n", __func__, cause); writel(cause, priv->io + KIRKWOOD_ERR_CAUSE); - return IRQ_HANDLED; } /* we've enabled only bytes interrupts ... */ @@ -178,7 +177,7 @@ static int kirkwood_dma_open(struct snd_pcm_substream *substream) } dram = mv_mbus_dram_info(); - addr = virt_to_phys(substream->dma_buffer.area); + addr = substream->dma_buffer.addr; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { prdata->play_stream = substream; kirkwood_dma_conf_mbus_windows(priv->io, diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c index 542538d10ab7..1d5db484d2df 100644 --- a/sound/soc/kirkwood/kirkwood-i2s.c +++ b/sound/soc/kirkwood/kirkwood-i2s.c @@ -95,7 +95,7 @@ static inline void kirkwood_set_dco(void __iomem *io, unsigned long rate) do { cpu_relax(); value = readl(io + KIRKWOOD_DCO_SPCR_STATUS); - value &= KIRKWOOD_DCO_SPCR_STATUS; + value &= KIRKWOOD_DCO_SPCR_STATUS_DCO_LOCK; } while (value == 0); } @@ -180,67 +180,72 @@ static int kirkwood_i2s_play_trigger(struct snd_pcm_substream *substream, int cmd, struct snd_soc_dai *dai) { struct kirkwood_dma_data *priv = snd_soc_dai_get_drvdata(dai); - unsigned long value; - - /* - * specs says KIRKWOOD_PLAYCTL must be read 2 times before - * changing it. So read 1 time here and 1 later. - */ - value = readl(priv->io + KIRKWOOD_PLAYCTL); + uint32_t ctl, value; + + ctl = readl(priv->io + KIRKWOOD_PLAYCTL); + if (ctl & KIRKWOOD_PLAYCTL_PAUSE) { + unsigned timeout = 5000; + /* + * The Armada510 spec says that if we enter pause mode, the + * busy bit must be read back as clear _twice_. Make sure + * we respect that otherwise we get DMA underruns. + */ + do { + value = ctl; + ctl = readl(priv->io + KIRKWOOD_PLAYCTL); + if (!((ctl | value) & KIRKWOOD_PLAYCTL_PLAY_BUSY)) + break; + udelay(1); + } while (timeout--); + + if ((ctl | value) & KIRKWOOD_PLAYCTL_PLAY_BUSY) + dev_notice(dai->dev, "timed out waiting for busy to deassert: %08x\n", + ctl); + } switch (cmd) { case SNDRV_PCM_TRIGGER_START: - /* stop audio, enable interrupts */ - value = readl(priv->io + KIRKWOOD_PLAYCTL); - value |= KIRKWOOD_PLAYCTL_PAUSE; - writel(value, priv->io + KIRKWOOD_PLAYCTL); - value = readl(priv->io + KIRKWOOD_INT_MASK); value |= KIRKWOOD_INT_CAUSE_PLAY_BYTES; writel(value, priv->io + KIRKWOOD_INT_MASK); /* configure audio & enable i2s playback */ - value = readl(priv->io + KIRKWOOD_PLAYCTL); - value &= ~KIRKWOOD_PLAYCTL_BURST_MASK; - value &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE + ctl &= ~KIRKWOOD_PLAYCTL_BURST_MASK; + ctl &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE | KIRKWOOD_PLAYCTL_SPDIF_EN); if (priv->burst == 32) - value |= KIRKWOOD_PLAYCTL_BURST_32; + ctl |= KIRKWOOD_PLAYCTL_BURST_32; else - value |= KIRKWOOD_PLAYCTL_BURST_128; - value |= KIRKWOOD_PLAYCTL_I2S_EN; - writel(value, priv->io + KIRKWOOD_PLAYCTL); + ctl |= KIRKWOOD_PLAYCTL_BURST_128; + ctl |= KIRKWOOD_PLAYCTL_I2S_EN; + writel(ctl, priv->io + KIRKWOOD_PLAYCTL); break; case SNDRV_PCM_TRIGGER_STOP: /* stop audio, disable interrupts */ - value = readl(priv->io + KIRKWOOD_PLAYCTL); - value |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE; - writel(value, priv->io + KIRKWOOD_PLAYCTL); + ctl |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE; + writel(ctl, priv->io + KIRKWOOD_PLAYCTL); value = readl(priv->io + KIRKWOOD_INT_MASK); value &= ~KIRKWOOD_INT_CAUSE_PLAY_BYTES; writel(value, priv->io + KIRKWOOD_INT_MASK); /* disable all playbacks */ - value = readl(priv->io + KIRKWOOD_PLAYCTL); - value &= ~(KIRKWOOD_PLAYCTL_I2S_EN | KIRKWOOD_PLAYCTL_SPDIF_EN); - writel(value, priv->io + KIRKWOOD_PLAYCTL); + ctl &= ~(KIRKWOOD_PLAYCTL_I2S_EN | KIRKWOOD_PLAYCTL_SPDIF_EN); + writel(ctl, priv->io + KIRKWOOD_PLAYCTL); break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: case SNDRV_PCM_TRIGGER_SUSPEND: - value = readl(priv->io + KIRKWOOD_PLAYCTL); - value |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE; - writel(value, priv->io + KIRKWOOD_PLAYCTL); + ctl |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE; + writel(ctl, priv->io + KIRKWOOD_PLAYCTL); break; case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - value = readl(priv->io + KIRKWOOD_PLAYCTL); - value &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE); - writel(value, priv->io + KIRKWOOD_PLAYCTL); + ctl &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE); + writel(ctl, priv->io + KIRKWOOD_PLAYCTL); break; default: @@ -260,11 +265,6 @@ static int kirkwood_i2s_rec_trigger(struct snd_pcm_substream *substream, switch (cmd) { case SNDRV_PCM_TRIGGER_START: - /* stop audio, enable interrupts */ - value = readl(priv->io + KIRKWOOD_RECCTL); - value |= KIRKWOOD_RECCTL_PAUSE; - writel(value, priv->io + KIRKWOOD_RECCTL); - value = readl(priv->io + KIRKWOOD_INT_MASK); value |= KIRKWOOD_INT_CAUSE_REC_BYTES; writel(value, priv->io + KIRKWOOD_INT_MASK); diff --git a/sound/soc/omap/am3517evm.c b/sound/soc/omap/am3517evm.c index fad350682ca2..c1900b2a6f28 100644 --- a/sound/soc/omap/am3517evm.c +++ b/sound/soc/omap/am3517evm.c @@ -25,8 +25,6 @@ #include <sound/soc.h> #include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/gpio.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include "omap-mcbsp.h" diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c index afb8d4f1bedf..a9a243860428 100644 --- a/sound/soc/omap/mcbsp.c +++ b/sound/soc/omap/mcbsp.c @@ -28,8 +28,6 @@ #include <linux/platform_data/asoc-ti-mcbsp.h> -#include <plat/cpu.h> - #include "mcbsp.h" static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) @@ -612,7 +610,7 @@ void omap_mcbsp_free(struct omap_mcbsp *mcbsp) * system will refuse to enter idle if the CLKS pin source is not reset * back to internal source. */ - if (!cpu_class_is_omap1()) + if (!mcbsp_omap1()) omap2_mcbsp_set_clks_src(mcbsp, MCBSP_CLKS_PRCM_SRC); spin_lock(&mcbsp->lock); diff --git a/sound/soc/omap/mcbsp.h b/sound/soc/omap/mcbsp.h index 49a67259ce5a..a89791c239a5 100644 --- a/sound/soc/omap/mcbsp.h +++ b/sound/soc/omap/mcbsp.h @@ -26,6 +26,12 @@ #include "omap-pcm.h" +#ifdef CONFIG_ARCH_OMAP1 +#define mcbsp_omap1() 1 +#else +#define mcbsp_omap1() 0 +#endif + /* McBSP register numbers. Register address offset = num * reg_step */ enum { /* Common registers */ diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index 521bfc3d2b2b..230b8c144848 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -29,7 +29,6 @@ #include <sound/soc.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <linux/gpio.h> #include <linux/module.h> #include <linux/platform_data/asoc-ti-mcbsp.h> diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index a6ee15747859..09167609c93e 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -34,7 +34,6 @@ #include <sound/initval.h> #include <sound/soc.h> -#include <plat/cpu.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include "mcbsp.h" #include "omap-mcbsp.h" @@ -512,7 +511,7 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, regs->srgr2 |= CLKSM; break; case OMAP_MCBSP_SYSCLK_CLKS_FCLK: - if (cpu_class_is_omap1()) { + if (mcbsp_omap1()) { err = -EINVAL; break; } @@ -520,7 +519,7 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, MCBSP_CLKS_PRCM_SRC); break; case OMAP_MCBSP_SYSCLK_CLKS_EXT: - if (cpu_class_is_omap1()) { + if (mcbsp_omap1()) { err = 0; break; } diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c index 3960e8df9c76..06ef8d67ed1c 100644 --- a/sound/soc/omap/osk5912.c +++ b/sound/soc/omap/osk5912.c @@ -28,7 +28,6 @@ #include <sound/soc.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <linux/gpio.h> #include <linux/module.h> #include <linux/platform_data/asoc-ti-mcbsp.h> diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c index 597cae769cea..b462a2c9385f 100644 --- a/sound/soc/omap/sdp3430.c +++ b/sound/soc/omap/sdp3430.c @@ -31,8 +31,6 @@ #include <sound/jack.h> #include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/gpio.h> #include <linux/platform_data/gpio-omap.h> #include <linux/platform_data/asoc-ti-mcbsp.h> diff --git a/sound/soc/samsung/bells.c b/sound/soc/samsung/bells.c index b56b9a3c6169..a2ca1567b9e4 100644 --- a/sound/soc/samsung/bells.c +++ b/sound/soc/samsung/bells.c @@ -212,7 +212,7 @@ static struct snd_soc_dai_link bells_dai_wm5102[] = { { .name = "Sub", .stream_name = "Sub", - .cpu_dai_name = "wm5110-aif3", + .cpu_dai_name = "wm5102-aif3", .codec_dai_name = "wm9081-hifi", .codec_name = "wm9081.1-006c", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF @@ -247,7 +247,7 @@ static struct snd_soc_dai_link bells_dai_wm5110[] = { { .name = "Sub", .stream_name = "Sub", - .cpu_dai_name = "wm5102-aif3", + .cpu_dai_name = "wm5110-aif3", .codec_dai_name = "wm9081-hifi", .codec_name = "wm9081.1-006c", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF diff --git a/sound/soc/tegra/tegra30_ahub.c b/sound/soc/tegra/tegra30_ahub.c index bf5610122c76..64b67a309196 100644 --- a/sound/soc/tegra/tegra30_ahub.c +++ b/sound/soc/tegra/tegra30_ahub.c @@ -26,7 +26,6 @@ #include <linux/regmap.h> #include <linux/slab.h> #include <mach/clk.h> -#include <mach/dma.h> #include <sound/soc.h> #include "tegra30_ahub.h" diff --git a/sound/soc/tegra/tegra_pcm.h b/sound/soc/tegra/tegra_pcm.h index b40279b9f413..bc8b46af928e 100644 --- a/sound/soc/tegra/tegra_pcm.h +++ b/sound/soc/tegra/tegra_pcm.h @@ -31,8 +31,6 @@ #ifndef __TEGRA_PCM_H__ #define __TEGRA_PCM_H__ -#include <mach/dma.h> - struct tegra_pcm_dma_params { unsigned long addr; unsigned long wrap; diff --git a/sound/usb/midi.c b/sound/usb/midi.c index c83f6143c0eb..eeefbce3873c 100644 --- a/sound/usb/midi.c +++ b/sound/usb/midi.c @@ -148,6 +148,7 @@ struct snd_usb_midi_out_endpoint { struct snd_usb_midi_out_endpoint* ep; struct snd_rawmidi_substream *substream; int active; + bool autopm_reference; uint8_t cable; /* cable number << 4 */ uint8_t state; #define STATE_UNKNOWN 0 @@ -1076,7 +1077,8 @@ static int snd_usbmidi_output_open(struct snd_rawmidi_substream *substream) return -ENXIO; } err = usb_autopm_get_interface(umidi->iface); - if (err < 0) + port->autopm_reference = err >= 0; + if (err < 0 && err != -EACCES) return -EIO; substream->runtime->private_data = port; port->state = STATE_UNKNOWN; @@ -1087,9 +1089,11 @@ static int snd_usbmidi_output_open(struct snd_rawmidi_substream *substream) static int snd_usbmidi_output_close(struct snd_rawmidi_substream *substream) { struct snd_usb_midi* umidi = substream->rmidi->private_data; + struct usbmidi_out_port *port = substream->runtime->private_data; substream_open(substream, 0); - usb_autopm_put_interface(umidi->iface); + if (port->autopm_reference) + usb_autopm_put_interface(umidi->iface); return 0; } diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 5c12a3fe8c3e..ef6fa24fc473 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -459,7 +459,7 @@ static int configure_endpoint(struct snd_usb_substream *subs) return ret; if (subs->sync_endpoint) - ret = snd_usb_endpoint_set_params(subs->data_endpoint, + ret = snd_usb_endpoint_set_params(subs->sync_endpoint, subs->pcm_format, subs->channels, subs->period_bytes, |