summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/pci/host/pci-imx6.c127
1 files changed, 69 insertions, 58 deletions
diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index 837d5e0447ac..6b5d8c2fe2f2 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -19,6 +19,7 @@
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
+#include <linux/of_device.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -31,6 +32,11 @@
#define to_imx6_pcie(x) container_of(x, struct imx6_pcie, pp)
+enum imx6_pcie_variants {
+ IMX6Q,
+ IMX6SX
+};
+
struct imx6_pcie {
int reset_gpio;
bool gpio_active_high;
@@ -40,7 +46,7 @@ struct imx6_pcie {
struct clk *pcie;
struct pcie_port pp;
struct regmap *iomuxc_gpr;
- bool is_imx6sx;
+ enum imx6_pcie_variants variant;
void __iomem *mem_base;
u32 tx_deemph_gen1;
u32 tx_deemph_gen2_3p5db;
@@ -240,7 +246,8 @@ static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
u32 val, gpr1, gpr12;
- if (imx6_pcie->is_imx6sx) {
+ switch (imx6_pcie->variant) {
+ case IMX6SX:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
@@ -248,72 +255,78 @@ static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
IMX6SX_GPR5_PCIE_BTNRST_RESET,
IMX6SX_GPR5_PCIE_BTNRST_RESET);
- return 0;
- }
-
- /*
- * If the bootloader already enabled the link we need some special
- * handling to get the core back into a state where it is safe to
- * touch it for configuration. As there is no dedicated reset signal
- * wired up for MX6QDL, we need to manually force LTSSM into "detect"
- * state before completely disabling LTSSM, which is a prerequisite
- * for core configuration.
- *
- * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a strong
- * indication that the bootloader activated the link.
- */
- regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1);
- regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, &gpr12);
-
- if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) &&
- (gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) {
- val = readl(pp->dbi_base + PCIE_PL_PFLR);
- val &= ~PCIE_PL_PFLR_LINK_STATE_MASK;
- val |= PCIE_PL_PFLR_FORCE_LINK;
- writel(val, pp->dbi_base + PCIE_PL_PFLR);
+ break;
+ case IMX6Q:
+ /*
+ * If the bootloader already enabled the link we need some
+ * special handling to get the core back into a state where
+ * it is safe to touch it for configuration. As there is
+ * no dedicated reset signal wired up for MX6QDL, we need
+ * to manually force LTSSM into "detect" state before
+ * completely disabling LTSSM, which is a prerequisite for
+ * core configuration.
+ *
+ * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we
+ * have a strong indication that the bootloader activated
+ * the link.
+ */
+ regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1);
+ regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, &gpr12);
+
+ if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) &&
+ (gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) {
+ val = readl(pp->dbi_base + PCIE_PL_PFLR);
+ val &= ~PCIE_PL_PFLR_LINK_STATE_MASK;
+ val |= PCIE_PL_PFLR_FORCE_LINK;
+ writel(val, pp->dbi_base + PCIE_PL_PFLR);
+
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+ IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
+ }
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
- IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
+ break;
}
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
-
return 0;
}
static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
{
struct pcie_port *pp = &imx6_pcie->pp;
- int ret;
+ int ret = 0;
- if (imx6_pcie->is_imx6sx) {
+ switch (imx6_pcie->variant) {
+ case IMX6SX:
ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi);
if (ret) {
dev_err(pp->dev, "unable to enable pcie_axi clock\n");
- return ret;
+ break;
}
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0);
- return ret;
+ break;
+ case IMX6Q:
+ /* power up core phy and enable ref clock */
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
+ /*
+ * the async reset input need ref clock to sync internally,
+ * when the ref clock comes after reset, internal synced
+ * reset time is too short, cannot meet the requirement.
+ * add one ~10us delay here.
+ */
+ udelay(10);
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
+ IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
+ break;
}
- /* power up core phy and enable ref clock */
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
- /*
- * the async reset input need ref clock to sync internally,
- * when the ref clock comes after reset, internal synced
- * reset time is too short, cannot meet the requirement.
- * add one ~10us delay here.
- */
- udelay(10);
- regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
- IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
- return 0;
+ return ret;
}
static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
@@ -357,7 +370,7 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
!imx6_pcie->gpio_active_high);
}
- if (imx6_pcie->is_imx6sx)
+ if (imx6_pcie->variant == IMX6SX)
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
IMX6SX_GPR5_PCIE_BTNRST_RESET, 0);
@@ -371,18 +384,16 @@ err_pcie_bus:
clk_disable_unprepare(imx6_pcie->pcie_phy);
err_pcie_phy:
return ret;
-
}
static void imx6_pcie_init_phy(struct pcie_port *pp)
{
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
- if (imx6_pcie->is_imx6sx) {
+ if (imx6_pcie->variant == IMX6SX)
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_RX_EQ_MASK,
IMX6SX_GPR12_PCIE_RX_EQ_2);
- }
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
@@ -593,8 +604,8 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
pp = &imx6_pcie->pp;
pp->dev = &pdev->dev;
- imx6_pcie->is_imx6sx = of_device_is_compatible(pp->dev->of_node,
- "fsl,imx6sx-pcie");
+ imx6_pcie->variant =
+ (enum imx6_pcie_variants)of_device_get_match_data(&pdev->dev);
/* Added for PCI abort handling */
hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
@@ -643,7 +654,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
return PTR_ERR(imx6_pcie->pcie);
}
- if (imx6_pcie->is_imx6sx) {
+ if (imx6_pcie->variant == IMX6SX) {
imx6_pcie->pcie_inbound_axi = devm_clk_get(&pdev->dev,
"pcie_inbound_axi");
if (IS_ERR(imx6_pcie->pcie_inbound_axi)) {
@@ -705,8 +716,8 @@ static void imx6_pcie_shutdown(struct platform_device *pdev)
}
static const struct of_device_id imx6_pcie_of_match[] = {
- { .compatible = "fsl,imx6q-pcie", },
- { .compatible = "fsl,imx6sx-pcie", },
+ { .compatible = "fsl,imx6q-pcie", .data = (void *)IMX6Q, },
+ { .compatible = "fsl,imx6sx-pcie", .data = (void *)IMX6SX, },
{},
};
MODULE_DEVICE_TABLE(of, imx6_pcie_of_match);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 06:51:43 +0100