diff options
-rw-r--r-- | drivers/scsi/Kconfig | 14 | ||||
-rw-r--r-- | drivers/scsi/hpsa.c | 53 | ||||
-rw-r--r-- | drivers/scsi/hpsa.h | 1 | ||||
-rw-r--r-- | drivers/scsi/hpsa_cmd.h | 2 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 4 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 7 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_nvme.c | 8 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_nvmet.c | 8 | ||||
-rw-r--r-- | drivers/scsi/megaraid/megaraid_sas.h | 4 | ||||
-rw-r--r-- | drivers/scsi/megaraid/megaraid_sas_base.c | 17 | ||||
-rw-r--r-- | drivers/scsi/megaraid/megaraid_sas_fusion.c | 4 | ||||
-rw-r--r-- | drivers/scsi/ufs/ufshcd.c | 2 |
12 files changed, 69 insertions, 55 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 4bf55b5d78be..3c52867dfe28 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1253,20 +1253,6 @@ config SCSI_LPFC_DEBUG_FS This makes debugging information from the lpfc driver available via the debugfs filesystem. -config LPFC_NVME_INITIATOR - bool "Emulex LightPulse Fibre Channel NVME Initiator Support" - depends on SCSI_LPFC && NVME_FC - ---help--- - This enables NVME Initiator support in the Emulex lpfc driver. - -config LPFC_NVME_TARGET - bool "Emulex LightPulse Fibre Channel NVME Initiator Support" - depends on SCSI_LPFC && NVME_TARGET_FC - ---help--- - This enables NVME Target support in the Emulex lpfc driver. - Target enablement must still be enabled on a per adapter - basis by module parameters. - config SCSI_SIM710 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)" depends on (EISA || MCA) && SCSI diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 524a0c755ed7..0d0be7754a65 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -2956,7 +2956,7 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr, /* fill_cmd can't fail here, no data buffer to map. */ (void) fill_cmd(c, reset_type, h, NULL, 0, 0, scsi3addr, TYPE_MSG); - rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, DEFAULT_TIMEOUT); + rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT); if (rc) { dev_warn(&h->pdev->dev, "Failed to send reset command\n"); goto out; @@ -3714,7 +3714,7 @@ exit_failed: * # (integer code indicating one of several NOT READY states * describing why a volume is to be kept offline) */ -static int hpsa_volume_offline(struct ctlr_info *h, +static unsigned char hpsa_volume_offline(struct ctlr_info *h, unsigned char scsi3addr[]) { struct CommandList *c; @@ -3735,7 +3735,7 @@ static int hpsa_volume_offline(struct ctlr_info *h, DEFAULT_TIMEOUT); if (rc) { cmd_free(h, c); - return 0; + return HPSA_VPD_LV_STATUS_UNSUPPORTED; } sense = c->err_info->SenseInfo; if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo)) @@ -3746,19 +3746,13 @@ static int hpsa_volume_offline(struct ctlr_info *h, cmd_status = c->err_info->CommandStatus; scsi_status = c->err_info->ScsiStatus; cmd_free(h, c); - /* Is the volume 'not ready'? */ - if (cmd_status != CMD_TARGET_STATUS || - scsi_status != SAM_STAT_CHECK_CONDITION || - sense_key != NOT_READY || - asc != ASC_LUN_NOT_READY) { - return 0; - } /* Determine the reason for not ready state */ ldstat = hpsa_get_volume_status(h, scsi3addr); /* Keep volume offline in certain cases: */ switch (ldstat) { + case HPSA_LV_FAILED: case HPSA_LV_UNDERGOING_ERASE: case HPSA_LV_NOT_AVAILABLE: case HPSA_LV_UNDERGOING_RPI: @@ -3780,7 +3774,7 @@ static int hpsa_volume_offline(struct ctlr_info *h, default: break; } - return 0; + return HPSA_LV_OK; } /* @@ -3853,10 +3847,10 @@ static int hpsa_update_device_info(struct ctlr_info *h, /* Do an inquiry to the device to see what it is. */ if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff, (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) { - /* Inquiry failed (msg printed already) */ dev_err(&h->pdev->dev, - "hpsa_update_device_info: inquiry failed\n"); - rc = -EIO; + "%s: inquiry failed, device will be skipped.\n", + __func__); + rc = HPSA_INQUIRY_FAILED; goto bail_out; } @@ -3885,15 +3879,19 @@ static int hpsa_update_device_info(struct ctlr_info *h, if ((this_device->devtype == TYPE_DISK || this_device->devtype == TYPE_ZBC) && is_logical_dev_addr_mode(scsi3addr)) { - int volume_offline; + unsigned char volume_offline; hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level); if (h->fw_support & MISC_FW_RAID_OFFLOAD_BASIC) hpsa_get_ioaccel_status(h, scsi3addr, this_device); volume_offline = hpsa_volume_offline(h, scsi3addr); - if (volume_offline < 0 || volume_offline > 0xff) - volume_offline = HPSA_VPD_LV_STATUS_UNSUPPORTED; - this_device->volume_offline = volume_offline & 0xff; + if (volume_offline == HPSA_LV_FAILED) { + rc = HPSA_LV_FAILED; + dev_err(&h->pdev->dev, + "%s: LV failed, device will be skipped.\n", + __func__); + goto bail_out; + } } else { this_device->raid_level = RAID_UNKNOWN; this_device->offload_config = 0; @@ -4379,8 +4377,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h) goto out; } if (rc) { - dev_warn(&h->pdev->dev, - "Inquiry failed, skipping device.\n"); + h->drv_req_rescan = 1; continue; } @@ -5558,7 +5555,7 @@ static void hpsa_scan_complete(struct ctlr_info *h) spin_lock_irqsave(&h->scan_lock, flags); h->scan_finished = 1; - wake_up_all(&h->scan_wait_queue); + wake_up(&h->scan_wait_queue); spin_unlock_irqrestore(&h->scan_lock, flags); } @@ -5576,11 +5573,23 @@ static void hpsa_scan_start(struct Scsi_Host *sh) if (unlikely(lockup_detected(h))) return hpsa_scan_complete(h); + /* + * If a scan is already waiting to run, no need to add another + */ + spin_lock_irqsave(&h->scan_lock, flags); + if (h->scan_waiting) { + spin_unlock_irqrestore(&h->scan_lock, flags); + return; + } + + spin_unlock_irqrestore(&h->scan_lock, flags); + /* wait until any scan already in progress is finished. */ while (1) { spin_lock_irqsave(&h->scan_lock, flags); if (h->scan_finished) break; + h->scan_waiting = 1; spin_unlock_irqrestore(&h->scan_lock, flags); wait_event(h->scan_wait_queue, h->scan_finished); /* Note: We don't need to worry about a race between this @@ -5590,6 +5599,7 @@ static void hpsa_scan_start(struct Scsi_Host *sh) */ } h->scan_finished = 0; /* mark scan as in progress */ + h->scan_waiting = 0; spin_unlock_irqrestore(&h->scan_lock, flags); if (unlikely(lockup_detected(h))) @@ -8792,6 +8802,7 @@ reinit_after_soft_reset: init_waitqueue_head(&h->event_sync_wait_queue); mutex_init(&h->reset_mutex); h->scan_finished = 1; /* no scan currently in progress */ + h->scan_waiting = 0; pci_set_drvdata(pdev, h); h->ndevices = 0; diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index bf6cdc106654..6f04f2ad4125 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -201,6 +201,7 @@ struct ctlr_info { dma_addr_t errinfo_pool_dhandle; unsigned long *cmd_pool_bits; int scan_finished; + u8 scan_waiting : 1; spinlock_t scan_lock; wait_queue_head_t scan_wait_queue; diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index a584cdf07058..5961705eef76 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -156,6 +156,7 @@ #define CFGTBL_BusType_Fibre2G 0x00000200l /* VPD Inquiry types */ +#define HPSA_INQUIRY_FAILED 0x02 #define HPSA_VPD_SUPPORTED_PAGES 0x00 #define HPSA_VPD_LV_DEVICE_ID 0x83 #define HPSA_VPD_LV_DEVICE_GEOMETRY 0xC1 @@ -166,6 +167,7 @@ /* Logical volume states */ #define HPSA_VPD_LV_STATUS_UNSUPPORTED 0xff #define HPSA_LV_OK 0x0 +#define HPSA_LV_FAILED 0x01 #define HPSA_LV_NOT_AVAILABLE 0x0b #define HPSA_LV_UNDERGOING_ERASE 0x0F #define HPSA_LV_UNDERGOING_RPI 0x12 diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 5c3be3e6f5e2..22819afbaef5 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -3315,9 +3315,9 @@ LPFC_ATTR_R(nvmet_mrq_post, LPFC_DEF_MRQ_POST, * lpfc_enable_fc4_type: Defines what FC4 types are supported. * Supported Values: 1 - register just FCP * 3 - register both FCP and NVME - * Supported values are [1,3]. Default value is 3 + * Supported values are [1,3]. Default value is 1 */ -LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_BOTH, +LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_FCP, LPFC_ENABLE_FCP, LPFC_ENABLE_BOTH, "Define fc4 type to register with fabric."); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 2697d49da4d7..6cc561b04211 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -5891,10 +5891,17 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) /* Check to see if it matches any module parameter */ for (i = 0; i < lpfc_enable_nvmet_cnt; i++) { if (wwn == lpfc_enable_nvmet[i]) { +#if (IS_ENABLED(CONFIG_NVME_TARGET_FC)) lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "6017 NVME Target %016llx\n", wwn); phba->nvmet_support = 1; /* a match */ +#else + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "6021 Can't enable NVME Target." + " NVME_TARGET_FC infrastructure" + " is not in kernel\n"); +#endif } } } diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c index 0a4c19081409..0024de1c6c1f 100644 --- a/drivers/scsi/lpfc/lpfc_nvme.c +++ b/drivers/scsi/lpfc/lpfc_nvme.c @@ -2149,7 +2149,7 @@ lpfc_nvme_create_localport(struct lpfc_vport *vport) /* localport is allocated from the stack, but the registration * call allocates heap memory as well as the private area. */ -#ifdef CONFIG_LPFC_NVME_INITIATOR +#if (IS_ENABLED(CONFIG_NVME_FC)) ret = nvme_fc_register_localport(&nfcp_info, &lpfc_nvme_template, &vport->phba->pcidev->dev, &localport); #else @@ -2190,7 +2190,7 @@ lpfc_nvme_create_localport(struct lpfc_vport *vport) void lpfc_nvme_destroy_localport(struct lpfc_vport *vport) { -#ifdef CONFIG_LPFC_NVME_INITIATOR +#if (IS_ENABLED(CONFIG_NVME_FC)) struct nvme_fc_local_port *localport; struct lpfc_nvme_lport *lport; struct lpfc_nvme_rport *rport = NULL, *rport_next = NULL; @@ -2274,7 +2274,7 @@ lpfc_nvme_update_localport(struct lpfc_vport *vport) int lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) { -#ifdef CONFIG_LPFC_NVME_INITIATOR +#if (IS_ENABLED(CONFIG_NVME_FC)) int ret = 0; struct nvme_fc_local_port *localport; struct lpfc_nvme_lport *lport; @@ -2403,7 +2403,7 @@ lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) void lpfc_nvme_unregister_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) { -#ifdef CONFIG_LPFC_NVME_INITIATOR +#if (IS_ENABLED(CONFIG_NVME_FC)) int ret; struct nvme_fc_local_port *localport; struct lpfc_nvme_lport *lport; diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c index b7739a554fe0..7ca868f394da 100644 --- a/drivers/scsi/lpfc/lpfc_nvmet.c +++ b/drivers/scsi/lpfc/lpfc_nvmet.c @@ -671,7 +671,7 @@ lpfc_nvmet_create_targetport(struct lpfc_hba *phba) lpfc_tgttemplate.target_features = NVMET_FCTGTFEAT_READDATA_RSP | NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED; -#ifdef CONFIG_LPFC_NVME_TARGET +#if (IS_ENABLED(CONFIG_NVME_TARGET_FC)) error = nvmet_fc_register_targetport(&pinfo, &lpfc_tgttemplate, &phba->pcidev->dev, &phba->targetport); @@ -756,7 +756,7 @@ lpfc_sli4_nvmet_xri_aborted(struct lpfc_hba *phba, void lpfc_nvmet_destroy_targetport(struct lpfc_hba *phba) { -#ifdef CONFIG_LPFC_NVME_TARGET +#if (IS_ENABLED(CONFIG_NVME_TARGET_FC)) struct lpfc_nvmet_tgtport *tgtp; if (phba->nvmet_support == 0) @@ -788,7 +788,7 @@ static void lpfc_nvmet_unsol_ls_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct hbq_dmabuf *nvmebuf) { -#ifdef CONFIG_LPFC_NVME_TARGET +#if (IS_ENABLED(CONFIG_NVME_TARGET_FC)) struct lpfc_nvmet_tgtport *tgtp; struct fc_frame_header *fc_hdr; struct lpfc_nvmet_rcv_ctx *ctxp; @@ -891,7 +891,7 @@ lpfc_nvmet_unsol_fcp_buffer(struct lpfc_hba *phba, struct rqb_dmabuf *nvmebuf, uint64_t isr_timestamp) { -#ifdef CONFIG_LPFC_NVME_TARGET +#if (IS_ENABLED(CONFIG_NVME_TARGET_FC)) struct lpfc_nvmet_rcv_ctx *ctxp; struct lpfc_nvmet_tgtport *tgtp; struct fc_frame_header *fc_hdr; diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index e7e5974e1a2c..2b209bbb4c91 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -35,8 +35,8 @@ /* * MegaRAID SAS Driver meta data */ -#define MEGASAS_VERSION "07.701.16.00-rc1" -#define MEGASAS_RELDATE "February 2, 2017" +#define MEGASAS_VERSION "07.701.17.00-rc1" +#define MEGASAS_RELDATE "March 2, 2017" /* * Device IDs diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 7ac9a9ee9bd4..0016f12cc563 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -1963,6 +1963,9 @@ scan_target: if (!mr_device_priv_data) return -ENOMEM; sdev->hostdata = mr_device_priv_data; + + atomic_set(&mr_device_priv_data->r1_ldio_hint, + instance->r1_ldio_hint_default); return 0; } @@ -5034,10 +5037,12 @@ megasas_setup_irqs_msix(struct megasas_instance *instance, u8 is_probe) &instance->irq_context[j]); /* Retry irq register for IO_APIC*/ instance->msix_vectors = 0; - if (is_probe) + if (is_probe) { + pci_free_irq_vectors(instance->pdev); return megasas_setup_irqs_ioapic(instance); - else + } else { return -1; + } } } return 0; @@ -5277,9 +5282,11 @@ static int megasas_init_fw(struct megasas_instance *instance) MPI2_REPLY_POST_HOST_INDEX_OFFSET); } - i = pci_alloc_irq_vectors(instance->pdev, 1, 1, PCI_IRQ_LEGACY); - if (i < 0) - goto fail_setup_irqs; + if (!instance->msix_vectors) { + i = pci_alloc_irq_vectors(instance->pdev, 1, 1, PCI_IRQ_LEGACY); + if (i < 0) + goto fail_setup_irqs; + } dev_info(&instance->pdev->dev, "firmware supports msix\t: (%d)", fw_msix_count); diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 29650ba669da..f990ab4d45e1 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -2159,7 +2159,7 @@ megasas_set_raidflag_cpu_affinity(union RAID_CONTEXT_UNION *praid_context, cpu_sel = MR_RAID_CTX_CPUSEL_1; if (is_stream_detected(rctx_g35) && - (raid->level == 5) && + ((raid->level == 5) || (raid->level == 6)) && (raid->writeMode == MR_RL_WRITE_THROUGH_MODE) && (cpu_sel == MR_RAID_CTX_CPUSEL_FCFS)) cpu_sel = MR_RAID_CTX_CPUSEL_0; @@ -2338,7 +2338,7 @@ megasas_build_ldio_fusion(struct megasas_instance *instance, fp_possible = false; atomic_dec(&instance->fw_outstanding); } else if ((scsi_buff_len > MR_LARGE_IO_MIN_SIZE) || - atomic_dec_if_positive(&mrdev_priv->r1_ldio_hint)) { + (atomic_dec_if_positive(&mrdev_priv->r1_ldio_hint) > 0)) { fp_possible = false; atomic_dec(&instance->fw_outstanding); if (scsi_buff_len > MR_LARGE_IO_MIN_SIZE) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 1359913bf840..e8c26e6e6237 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -7642,7 +7642,7 @@ static inline ssize_t ufshcd_pm_lvl_store(struct device *dev, if (kstrtoul(buf, 0, &value)) return -EINVAL; - if ((value < UFS_PM_LVL_0) || (value >= UFS_PM_LVL_MAX)) + if (value >= UFS_PM_LVL_MAX) return -EINVAL; spin_lock_irqsave(hba->host->host_lock, flags); |