diff options
| -rw-r--r-- | Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt | 41 | ||||
| -rw-r--r-- | drivers/extcon/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/extcon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/extcon/extcon-qcom-spmi-misc.c | 170 |
4 files changed, 218 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt new file mode 100644 index 000000000000..35383adb10f1 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt @@ -0,0 +1,41 @@ +Qualcomm's PM8941 USB ID Extcon device + +Some Qualcomm PMICs have a "misc" module that can be used to detect when +the USB ID pin has been pulled low or high. + +PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: Should contain "qcom,pm8941-misc"; + +- reg: + Usage: required + Value type: <u32> + Definition: Should contain the offset to the misc address space + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: Should contain the usb id interrupt + +- interrupt-names: + Usage: required + Value type: <stringlist> + Definition: Should contain the string "usb_id" for the usb id interrupt + +Example: + + pmic { + usb_id: misc@900 { + compatible = "qcom,pm8941-misc"; + reg = <0x900>; + interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_id"; + }; + } + + usb-controller { + extcon = <&usb_id>; + }; diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 3d89e60a3e71..04788d92ea52 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -96,6 +96,12 @@ config EXTCON_PALMAS Say Y here to enable support for USB peripheral and USB host detection by palmas usb. +config EXTCON_QCOM_SPMI_MISC + tristate "Qualcomm USB extcon support" + help + Say Y here to enable SPMI PMIC based USB cable detection + support on Qualcomm PMICs such as PM8941. + config EXTCON_RT8973A tristate "Richtek RT8973A EXTCON support" depends on I2C diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index 972c813c375b..31a0a999c4fb 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o obj-$(CONFIG_EXTCON_MAX77843) += extcon-max77843.o obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o obj-$(CONFIG_EXTCON_PALMAS) += extcon-palmas.o +obj-$(CONFIG_EXTCON_QCOM_SPMI_MISC) += extcon-qcom-spmi-misc.o obj-$(CONFIG_EXTCON_RT8973A) += extcon-rt8973a.o obj-$(CONFIG_EXTCON_SM5502) += extcon-sm5502.o obj-$(CONFIG_EXTCON_USB_GPIO) += extcon-usb-gpio.o diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c new file mode 100644 index 000000000000..ca957a5f4291 --- /dev/null +++ b/drivers/extcon/extcon-qcom-spmi-misc.c @@ -0,0 +1,170 @@ +/** + * extcon-qcom-spmi-misc.c - Qualcomm USB extcon driver to support USB ID + * detection based on extcon-usb-gpio.c. + * + * Copyright (C) 2016 Linaro, Ltd. + * Stephen Boyd <stephen.boyd@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/extcon.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/workqueue.h> + +#define USB_ID_DEBOUNCE_MS 5 /* ms */ + +struct qcom_usb_extcon_info { + struct extcon_dev *edev; + int irq; + struct delayed_work wq_detcable; + unsigned long debounce_jiffies; +}; + +static const unsigned int qcom_usb_extcon_cable[] = { + EXTCON_USB_HOST, + EXTCON_NONE, +}; + +static void qcom_usb_extcon_detect_cable(struct work_struct *work) +{ + bool id; + int ret; + struct qcom_usb_extcon_info *info = container_of(to_delayed_work(work), + struct qcom_usb_extcon_info, + wq_detcable); + + /* check ID and update cable state */ + ret = irq_get_irqchip_state(info->irq, IRQCHIP_STATE_LINE_LEVEL, &id); + if (ret) + return; + + extcon_set_state(info->edev, EXTCON_USB_HOST, !id); +} + +static irqreturn_t qcom_usb_irq_handler(int irq, void *dev_id) +{ + struct qcom_usb_extcon_info *info = dev_id; + + queue_delayed_work(system_power_efficient_wq, &info->wq_detcable, + info->debounce_jiffies); + + return IRQ_HANDLED; +} + +static int qcom_usb_extcon_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct qcom_usb_extcon_info *info; + int ret; + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->edev = devm_extcon_dev_allocate(dev, qcom_usb_extcon_cable); + if (IS_ERR(info->edev)) { + dev_err(dev, "failed to allocate extcon device\n"); + return -ENOMEM; + } + + ret = devm_extcon_dev_register(dev, info->edev); + if (ret < 0) { + dev_err(dev, "failed to register extcon device\n"); + return ret; + } + + info->debounce_jiffies = msecs_to_jiffies(USB_ID_DEBOUNCE_MS); + INIT_DELAYED_WORK(&info->wq_detcable, qcom_usb_extcon_detect_cable); + + info->irq = platform_get_irq_byname(pdev, "usb_id"); + if (info->irq < 0) + return info->irq; + + ret = devm_request_threaded_irq(dev, info->irq, NULL, + qcom_usb_irq_handler, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + pdev->name, info); + if (ret < 0) { + dev_err(dev, "failed to request handler for ID IRQ\n"); + return ret; + } + + platform_set_drvdata(pdev, info); + device_init_wakeup(dev, 1); + + /* Perform initial detection */ + qcom_usb_extcon_detect_cable(&info->wq_detcable.work); + + return 0; +} + +static int qcom_usb_extcon_remove(struct platform_device *pdev) +{ + struct qcom_usb_extcon_info *info = platform_get_drvdata(pdev); + + cancel_delayed_work_sync(&info->wq_detcable); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int qcom_usb_extcon_suspend(struct device *dev) +{ + struct qcom_usb_extcon_info *info = dev_get_drvdata(dev); + int ret = 0; + + if (device_may_wakeup(dev)) + ret = enable_irq_wake(info->irq); + + return ret; +} + +static int qcom_usb_extcon_resume(struct device *dev) +{ + struct qcom_usb_extcon_info *info = dev_get_drvdata(dev); + int ret = 0; + + if (device_may_wakeup(dev)) + ret = disable_irq_wake(info->irq); + + return ret; +} +#endif + +static SIMPLE_DEV_PM_OPS(qcom_usb_extcon_pm_ops, + qcom_usb_extcon_suspend, qcom_usb_extcon_resume); + +static const struct of_device_id qcom_usb_extcon_dt_match[] = { + { .compatible = "qcom,pm8941-misc", }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_usb_extcon_dt_match); + +static struct platform_driver qcom_usb_extcon_driver = { + .probe = qcom_usb_extcon_probe, + .remove = qcom_usb_extcon_remove, + .driver = { + .name = "extcon-pm8941-misc", + .pm = &qcom_usb_extcon_pm_ops, + .of_match_table = qcom_usb_extcon_dt_match, + }, +}; +module_platform_driver(qcom_usb_extcon_driver); + +MODULE_DESCRIPTION("QCOM USB ID extcon driver"); +MODULE_AUTHOR("Stephen Boyd <stephen.boyd@linaro.org>"); +MODULE_LICENSE("GPL v2"); |