diff options
| -rw-r--r-- | arch/arm/mach-pxa/Kconfig | 15 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/xcep.c | 187 |
3 files changed, 204 insertions, 0 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index d1dcb1cf0758..b3cdfe55c031 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -504,6 +504,21 @@ config MACH_EZX_E2 default y depends on PXA_EZX +config MACH_XCEP + bool "Iskratel Electronics XCEP" + select PXA25x + select MTD + select MTD_PARTITIONS + select MTD_PHYSMAP + select MTD_CFI_INTELEXT + select MTD_CFI + select MTD_CHAR + select SMC91X + select PXA_SSP + help + PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. + Tuned for usage in Libera instruments for particle accelerators. + endmenu config PXA25x diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index aa8f83e9421e..c9890a124cf3 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -79,6 +79,8 @@ obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o obj-$(CONFIG_MACH_CM_X300) += cm-x300.o obj-$(CONFIG_PXA_EZX) += ezx.o +obj-$(CONFIG_MACH_XCEP) += xcep.o + obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o obj-$(CONFIG_MACH_STARGATE2) += stargate2.o obj-$(CONFIG_MACH_CSB726) += csb726.o diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c new file mode 100644 index 000000000000..3fd79cbb36c8 --- /dev/null +++ b/arch/arm/mach-pxa/xcep.c @@ -0,0 +1,187 @@ +/* linux/arch/arm/mach-pxa/xcep.c + * + * Support for the Iskratel Electronics XCEP platform as used in + * the Libera instruments from Instrumentation Technologies. + * + * Author: Ales Bardorfer <ales@i-tech.si> + * Contributions by: Abbott, MG (Michael) <michael.abbott@diamond.ac.uk> + * Contributions by: Matej Kenda <matej.kenda@i-tech.si> + * Created: June 2006 + * Copyright: (C) 2006-2009 Instrumentation Technologies + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/smc91x.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <asm/mach/map.h> + +#include <plat/i2c.h> + +#include <mach/hardware.h> +#include <mach/pxa2xx-regs.h> +#include <mach/mfp-pxa25x.h> + +#include "generic.h" + +#define XCEP_ETH_PHYS (PXA_CS3_PHYS + 0x00000300) +#define XCEP_ETH_PHYS_END (PXA_CS3_PHYS + 0x000fffff) +#define XCEP_ETH_ATTR (PXA_CS3_PHYS + 0x02000000) +#define XCEP_ETH_ATTR_END (PXA_CS3_PHYS + 0x020fffff) +#define XCEP_ETH_IRQ IRQ_GPIO0 + +/* XCEP CPLD base */ +#define XCEP_CPLD_BASE 0xf0000000 + + +/* Flash partitions. */ + +static struct mtd_partition xcep_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE + }, { + .name = "Bootloader ENV", + .size = 0x00040000, + .offset = 0x00040000, + .mask_flags = MTD_WRITEABLE + }, { + .name = "Kernel", + .size = 0x00100000, + .offset = 0x00080000, + }, { + .name = "Rescue fs", + .size = 0x00280000, + .offset = 0x00180000, + }, { + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00400000 + } +}; + +static struct physmap_flash_data xcep_flash_data[] = { + { + .width = 4, /* bankwidth in bytes */ + .parts = xcep_partitions, + .nr_parts = ARRAY_SIZE(xcep_partitions) + } +}; + +static struct resource flash_resource = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = xcep_flash_data, + }, + .resource = &flash_resource, + .num_resources = 1, +}; + + + +/* SMC LAN91C111 network controller. */ + +static struct resource smc91x_resources[] = { + [0] = { + .name = "smc91x-regs", + .start = XCEP_ETH_PHYS, + .end = XCEP_ETH_PHYS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = XCEP_ETH_IRQ, + .end = XCEP_ETH_IRQ, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .name = "smc91x-attrib", + .start = XCEP_ETH_ATTR, + .end = XCEP_ETH_ATTR_END, + .flags = IORESOURCE_MEM, + }, +}; + +static struct smc91x_platdata xcep_smc91x_info = { + .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, + .dev = { + .platform_data = &xcep_smc91x_info, + }, +}; + + +static struct platform_device *devices[] __initdata = { + &flash_device, + &smc91x_device, +}; + + +/* We have to state that there are HWMON devices on the I2C bus on XCEP. + * Drivers for HWMON verify capabilities of the adapter when loading and + * refuse to attach if the adapter doesn't support HWMON class of devices. + * See also Documentation/i2c/porting-clients. */ +static struct i2c_pxa_platform_data xcep_i2c_platform_data = { + .class = I2C_CLASS_HWMON +}; + + +static mfp_cfg_t xcep_pin_config[] __initdata = { + GPIO79_nCS_3, /* SMC 91C111 chip select. */ + GPIO80_nCS_4, /* CPLD chip select. */ + /* SSP communication to MSP430 */ + GPIO23_SSP1_SCLK, + GPIO24_SSP1_SFRM, + GPIO25_SSP1_TXD, + GPIO26_SSP1_RXD, + GPIO27_SSP1_EXTCLK +}; + +static void __init xcep_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config)); + + /* See Intel XScale Developer's Guide for details */ + /* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */ + MSC1 = (MSC1 & 0xffff) | 0xD5540000; + /* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */ + MSC2 = (MSC2 & 0xffff) | 0x72A00000; + + platform_add_devices(ARRAY_AND_SIZE(devices)); + pxa_set_i2c_info(&xcep_i2c_platform_data); +} + +MACHINE_START(XCEP, "Iskratel XCEP") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .init_machine = xcep_init, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .timer = &pxa_timer, +MACHINE_END + |