diff options
| -rw-r--r-- | Documentation/i2c/slave-interface | 5 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-bcm-kona.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-cadence.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-core.c | 16 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-rcar.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-rk3x.c | 14 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-sh_mobile.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/muxes/i2c-demux-pinctrl.c | 15 |
8 files changed, 43 insertions, 15 deletions
diff --git a/Documentation/i2c/slave-interface b/Documentation/i2c/slave-interface index 80807adb8ded..7e2a228f21bc 100644 --- a/Documentation/i2c/slave-interface +++ b/Documentation/i2c/slave-interface @@ -145,6 +145,11 @@ If you want to add slave support to the bus driver: * Catch the slave interrupts and send appropriate i2c_slave_events to the backend. +Note that most hardware supports being master _and_ slave on the same bus. So, +if you extend a bus driver, please make sure that the driver supports that as +well. In almost all cases, slave support does not need to disable the master +functionality. + Check the i2c-rcar driver as an example. diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c index f98743277e3c..258cb9a40ab3 100644 --- a/drivers/i2c/busses/i2c-bcm-kona.c +++ b/drivers/i2c/busses/i2c-bcm-kona.c @@ -643,7 +643,7 @@ static int bcm_kona_i2c_xfer(struct i2c_adapter *adapter, if (rc < 0) { dev_err(dev->device, "restart cmd failed rc = %d\n", rc); - goto xfer_send_stop; + goto xfer_send_stop; } } diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 90bbd9f9dd8f..3c16a2f7c673 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -767,7 +767,7 @@ static int cdns_i2c_setclk(unsigned long clk_in, struct cdns_i2c *id) * depending on the scaling direction. * * Return: NOTIFY_STOP if the rate change should be aborted, NOTIFY_OK - * to acknowedge the change, NOTIFY_DONE if the notification is + * to acknowledge the change, NOTIFY_DONE if the notification is * considered irrelevant. */ static int cdns_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index c6922b806fb7..fcd973d5131e 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -367,13 +367,17 @@ int i2c_dw_init(struct dw_i2c_dev *dev) dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt); /* Configure SDA Hold Time if required */ - if (dev->sda_hold_time) { - reg = dw_readl(dev, DW_IC_COMP_VERSION); - if (reg >= DW_IC_SDA_HOLD_MIN_VERS) + reg = dw_readl(dev, DW_IC_COMP_VERSION); + if (reg >= DW_IC_SDA_HOLD_MIN_VERS) { + if (dev->sda_hold_time) { dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD); - else - dev_warn(dev->dev, - "Hardware too old to adjust SDA hold time."); + } else { + /* Keep previous hold time setting if no one set it */ + dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD); + } + } else { + dev_warn(dev->dev, + "Hardware too old to adjust SDA hold time.\n"); } /* Configure Tx/Rx FIFO threshold levels */ diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 52407f3c9e1c..9bd849dacee8 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -378,7 +378,7 @@ static void rcar_i2c_dma(struct rcar_i2c_priv *priv) } dma_addr = dma_map_single(chan->device->dev, buf, len, dir); - if (dma_mapping_error(dev, dma_addr)) { + if (dma_mapping_error(chan->device->dev, dma_addr)) { dev_dbg(dev, "dma map failed, using PIO\n"); return; } diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 2bc8b01153d6..5c5b7cada8be 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -918,7 +918,7 @@ static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate) * Code adapted from i2c-cadence.c. * * Return: NOTIFY_STOP if the rate change should be aborted, NOTIFY_OK - * to acknowedge the change, NOTIFY_DONE if the notification is + * to acknowledge the change, NOTIFY_DONE if the notification is * considered irrelevant. */ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long @@ -1111,6 +1111,15 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap, return ret < 0 ? ret : num; } +static __maybe_unused int rk3x_i2c_resume(struct device *dev) +{ + struct rk3x_i2c *i2c = dev_get_drvdata(dev); + + rk3x_i2c_adapt_div(i2c, clk_get_rate(i2c->clk)); + + return 0; +} + static u32 rk3x_i2c_func(struct i2c_adapter *adap) { return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING; @@ -1334,12 +1343,15 @@ static int rk3x_i2c_remove(struct platform_device *pdev) return 0; } +static SIMPLE_DEV_PM_OPS(rk3x_i2c_pm_ops, NULL, rk3x_i2c_resume); + static struct platform_driver rk3x_i2c_driver = { .probe = rk3x_i2c_probe, .remove = rk3x_i2c_remove, .driver = { .name = "rk3x-i2c", .of_match_table = rk3x_i2c_match, + .pm = &rk3x_i2c_pm_ops, }, }; diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 6fb3e2645992..05b1eeab9cf5 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -610,7 +610,7 @@ static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd) return; dma_addr = dma_map_single(chan->device->dev, pd->msg->buf, pd->msg->len, dir); - if (dma_mapping_error(pd->dev, dma_addr)) { + if (dma_mapping_error(chan->device->dev, dma_addr)) { dev_dbg(pd->dev, "dma map failed, using PIO\n"); return; } diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c index 215ac87f606d..b3893f6282ba 100644 --- a/drivers/i2c/muxes/i2c-demux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c @@ -37,8 +37,6 @@ struct i2c_demux_pinctrl_priv { struct i2c_demux_pinctrl_chan chan[]; }; -static struct property status_okay = { .name = "status", .length = 3, .value = "ok" }; - static int i2c_demux_master_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { struct i2c_demux_pinctrl_priv *priv = adap->algo_data; @@ -107,6 +105,7 @@ static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 ne of_changeset_revert(&priv->chan[new_chan].chgset); err: dev_err(priv->dev, "failed to setup demux-adapter %d (%d)\n", new_chan, ret); + priv->cur_chan = -EINVAL; return ret; } @@ -192,6 +191,7 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct i2c_demux_pinctrl_priv *priv; + struct property *props; int num_chan, i, j, err; num_chan = of_count_phandle_with_args(np, "i2c-parent", NULL); @@ -202,7 +202,10 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev) priv = devm_kzalloc(&pdev->dev, sizeof(*priv) + num_chan * sizeof(struct i2c_demux_pinctrl_chan), GFP_KERNEL); - if (!priv) + + props = devm_kcalloc(&pdev->dev, num_chan, sizeof(*props), GFP_KERNEL); + + if (!priv || !props) return -ENOMEM; err = of_property_read_string(np, "i2c-bus-name", &priv->bus_name); @@ -220,8 +223,12 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev) } priv->chan[i].parent_np = adap_np; + props[i].name = devm_kstrdup(&pdev->dev, "status", GFP_KERNEL); + props[i].value = devm_kstrdup(&pdev->dev, "ok", GFP_KERNEL); + props[i].length = 3; + of_changeset_init(&priv->chan[i].chgset); - of_changeset_update_property(&priv->chan[i].chgset, adap_np, &status_okay); + of_changeset_update_property(&priv->chan[i].chgset, adap_np, &props[i]); } priv->num_chan = num_chan; |