diff options
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/as3711.txt | 73 | ||||
| -rw-r--r-- | drivers/mfd/as3711.c | 27 |
2 files changed, 96 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/mfd/as3711.txt b/Documentation/devicetree/bindings/mfd/as3711.txt new file mode 100644 index 000000000000..d98cf18c721c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/as3711.txt @@ -0,0 +1,73 @@ +AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power +supplies, a battery charger and an RTC. So far only bindings for the two stepup +DCDC converters are defined. Other DCDC and LDO supplies are configured, using +standard regulator properties, they must belong to a sub-node, called +"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter +configuration should be placed in a subnode, called "backlight." + +Compulsory properties: +- compatible : must be "ams,as3711" +- reg : specifies the I2C address + +To use the SU1 converter as a backlight source the following two properties must +be provided: +- su1-dev : framebuffer phandle +- su1-max-uA : maximum current + +To use the SU2 converter as a backlight source the following two properties must +be provided: +- su2-dev : framebuffer phandle +- su1-max-uA : maximum current + +Additionally one of these properties must be provided to select the type of +feedback used: +- su2-feedback-voltage : voltage feedback is used +- su2-feedback-curr1 : CURR1 input used for current feedback +- su2-feedback-curr2 : CURR2 input used for current feedback +- su2-feedback-curr3 : CURR3 input used for current feedback +- su2-feedback-curr-auto: automatic current feedback selection + +and one of these to select the over-voltage protection pin +- su2-fbprot-lx-sd4 : LX_SD4 is used for over-voltage protection +- su2-fbprot-gpio2 : GPIO2 is used for over-voltage protection +- su2-fbprot-gpio3 : GPIO3 is used for over-voltage protection +- su2-fbprot-gpio4 : GPIO4 is used for over-voltage protection + +If "su2-feedback-curr-auto" is selected, one or more of the following properties +have to be specified: +- su2-auto-curr1 : use CURR1 input for current feedback +- su2-auto-curr2 : use CURR2 input for current feedback +- su2-auto-curr3 : use CURR3 input for current feedback + +Example: + +as3711@40 { + compatible = "ams,as3711"; + reg = <0x40>; + + regulators { + sd4 { + regulator-name = "1.215V"; + regulator-min-microvolt = <1215000>; + regulator-max-microvolt = <1235000>; + }; + ldo2 { + regulator-name = "2.8V CPU"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + + backlight { + compatible = "ams,as3711-bl"; + su2-dev = <&lcdc>; + su2-max-uA = <36000>; + su2-feedback-curr-auto; + su2-fbprot-gpio4; + su2-auto-curr1; + su2-auto-curr2; + su2-auto-curr3; + }; +}; diff --git a/drivers/mfd/as3711.c b/drivers/mfd/as3711.c index e994c9691124..01e414162702 100644 --- a/drivers/mfd/as3711.c +++ b/drivers/mfd/as3711.c @@ -112,16 +112,34 @@ static const struct regmap_config as3711_regmap_config = { .cache_type = REGCACHE_RBTREE, }; +#ifdef CONFIG_OF +static struct of_device_id as3711_of_match[] = { + {.compatible = "ams,as3711",}, + {} +}; +MODULE_DEVICE_TABLE(of, as3711_of_match); +#endif + static int as3711_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct as3711 *as3711; - struct as3711_platform_data *pdata = client->dev.platform_data; + struct as3711_platform_data *pdata; unsigned int id1, id2; int ret; - if (!pdata) - dev_dbg(&client->dev, "Platform data not found\n"); + if (!client->dev.of_node) { + pdata = client->dev.platform_data; + if (!pdata) + dev_dbg(&client->dev, "Platform data not found\n"); + } else { + pdata = devm_kzalloc(&client->dev, + sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&client->dev, "Failed to allocate pdata\n"); + return -ENOMEM; + } + } as3711 = devm_kzalloc(&client->dev, sizeof(struct as3711), GFP_KERNEL); if (!as3711) { @@ -193,7 +211,8 @@ static struct i2c_driver as3711_i2c_driver = { .driver = { .name = "as3711", .owner = THIS_MODULE, - }, + .of_match_table = of_match_ptr(as3711_of_match), + }, .probe = as3711_i2c_probe, .remove = as3711_i2c_remove, .id_table = as3711_i2c_id, |