summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/media/common/b2c2/Kconfig1
-rw-r--r--drivers/media/common/b2c2/flexcop-fe-tuner.c51
-rw-r--r--drivers/media/common/b2c2/flexcop-misc.c1
-rw-r--r--drivers/media/common/b2c2/flexcop-reg.h1
-rw-r--r--drivers/media/dvb-frontends/Kconfig7
-rw-r--r--drivers/media/dvb-frontends/Makefile1
-rw-r--r--drivers/media/dvb-frontends/cx24120.c1577
-rw-r--r--drivers/media/dvb-frontends/cx24120.h56
8 files changed, 1688 insertions, 7 deletions
diff --git a/drivers/media/common/b2c2/Kconfig b/drivers/media/common/b2c2/Kconfig
index a8c6cdfaa2f5..e5936380b1e5 100644
--- a/drivers/media/common/b2c2/Kconfig
+++ b/drivers/media/common/b2c2/Kconfig
@@ -14,6 +14,7 @@ config DVB_B2C2_FLEXCOP
select DVB_S5H1420 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TUNER_ITD1000 if MEDIA_SUBDRV_AUTOSELECT
select DVB_ISL6421 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_CX24120 if MEDIA_SUBDRV_AUTOSELECT
select DVB_CX24123 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
select DVB_TUNER_CX24113 if MEDIA_SUBDRV_AUTOSELECT
diff --git a/drivers/media/common/b2c2/flexcop-fe-tuner.c b/drivers/media/common/b2c2/flexcop-fe-tuner.c
index 7e14e90d2922..66f6910a1810 100644
--- a/drivers/media/common/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/common/b2c2/flexcop-fe-tuner.c
@@ -12,6 +12,7 @@
#include "cx24113.h"
#include "cx24123.h"
#include "isl6421.h"
+#include "cx24120.h"
#include "mt352.h"
#include "bcm3510.h"
#include "nxt200x.h"
@@ -26,6 +27,16 @@
#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \
(defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE)))
+#if FE_SUPPORTED(BCM3510) || FE_SUPPORTED(CX24120)
+static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
+ const struct firmware **fw, char *name)
+{
+ struct flexcop_device *fc = fe->dvb->priv;
+
+ return request_firmware(fw, name, fc->dev);
+}
+#endif
+
/* lnb control */
#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299)
static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
@@ -445,13 +456,6 @@ static int airstar_dvbt_attach(struct flexcop_device *fc,
/* AirStar ATSC 1st generation */
#if FE_SUPPORTED(BCM3510)
-static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
- const struct firmware **fw, char* name)
-{
- struct flexcop_device *fc = fe->dvb->priv;
- return request_firmware(fw, name, fc->dev);
-}
-
static struct bcm3510_config air2pc_atsc_first_gen_config = {
.demod_address = 0x0f,
.request_firmware = flexcop_fe_request_firmware,
@@ -619,6 +623,38 @@ fail:
#define cablestar2_attach NULL
#endif
+/* SkyStar S2 PCI DVB-S/S2 card based on Conexant cx24120/cx24118 */
+#if FE_SUPPORTED(CX24120) && FE_SUPPORTED(ISL6421)
+static const struct cx24120_config skystar2_rev3_3_cx24120_config = {
+ .i2c_addr = 0x55,
+ .xtal_khz = 10111,
+ .initial_mpeg_config = { 0xa1, 0x76, 0x07 },
+ .request_firmware = flexcop_fe_request_firmware,
+};
+
+static int skystarS2_rev33_attach(struct flexcop_device *fc,
+ struct i2c_adapter *i2c)
+{
+ fc->fe = dvb_attach(cx24120_attach,
+ &skystar2_rev3_3_cx24120_config, i2c);
+ if (fc->fe == NULL)
+ return 0;
+
+ fc->dev_type = FC_SKYS2_REV33;
+ fc->fc_i2c_adap[2].no_base_addr = 1;
+ if ((dvb_attach(isl6421_attach, fc->fe,
+ &fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0, false) == NULL)) {
+ err("ISL6421 could NOT be attached!");
+ return 0;
+ }
+ info("ISL6421 successfully attached.");
+
+ return 1;
+}
+#else
+#define skystarS2_rev33_attach NULL
+#endif
+
static struct {
flexcop_device_type_t type;
int (*attach)(struct flexcop_device *, struct i2c_adapter *);
@@ -632,6 +668,7 @@ static struct {
{ FC_AIR_ATSC1, airstar_atsc1_attach },
{ FC_CABLE, cablestar2_attach },
{ FC_SKY_REV23, skystar2_rev23_attach },
+ { FC_SKYS2_REV33, skystarS2_rev33_attach },
};
/* try to figure out the frontend */
diff --git a/drivers/media/common/b2c2/flexcop-misc.c b/drivers/media/common/b2c2/flexcop-misc.c
index f06f3a9070f5..b8eff235367d 100644
--- a/drivers/media/common/b2c2/flexcop-misc.c
+++ b/drivers/media/common/b2c2/flexcop-misc.c
@@ -56,6 +56,7 @@ static const char *flexcop_device_names[] = {
[FC_SKY_REV26] = "Sky2PC/SkyStar 2 DVB-S rev 2.6",
[FC_SKY_REV27] = "Sky2PC/SkyStar 2 DVB-S rev 2.7a/u",
[FC_SKY_REV28] = "Sky2PC/SkyStar 2 DVB-S rev 2.8",
+ [FC_SKYS2_REV33] = "Sky2PC/SkyStar S2 DVB-S/S2 rev 3.3",
};
static const char *flexcop_bus_names[] = {
diff --git a/drivers/media/common/b2c2/flexcop-reg.h b/drivers/media/common/b2c2/flexcop-reg.h
index dc4528dcbb98..835c54d60e74 100644
--- a/drivers/media/common/b2c2/flexcop-reg.h
+++ b/drivers/media/common/b2c2/flexcop-reg.h
@@ -24,6 +24,7 @@ typedef enum {
FC_SKY_REV26,
FC_SKY_REV27,
FC_SKY_REV28,
+ FC_SKYS2_REV33,
} flexcop_device_type_t;
typedef enum {
diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig
index 97c151d5b2e1..7ff3ec4d8ab6 100644
--- a/drivers/media/dvb-frontends/Kconfig
+++ b/drivers/media/dvb-frontends/Kconfig
@@ -223,6 +223,13 @@ config DVB_CX24117
help
A Dual DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+config DVB_CX24120
+ tristate "Conexant CX24120 based"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A DVB-S/DVB-S2 tuner module. Say Y when you want to support this frontend.
+
config DVB_SI21XX
tristate "Silicon Labs SI21XX based"
depends on DVB_CORE && I2C
diff --git a/drivers/media/dvb-frontends/Makefile b/drivers/media/dvb-frontends/Makefile
index 23d399bec804..ebab1b83e1fc 100644
--- a/drivers/media/dvb-frontends/Makefile
+++ b/drivers/media/dvb-frontends/Makefile
@@ -83,6 +83,7 @@ obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o
obj-$(CONFIG_DVB_AF9013) += af9013.o
obj-$(CONFIG_DVB_CX24116) += cx24116.o
obj-$(CONFIG_DVB_CX24117) += cx24117.o
+obj-$(CONFIG_DVB_CX24120) += cx24120.o
obj-$(CONFIG_DVB_SI21XX) += si21xx.o
obj-$(CONFIG_DVB_SI2168) += si2168.o
obj-$(CONFIG_DVB_STV0288) += stv0288.o
diff --git a/drivers/media/dvb-frontends/cx24120.c b/drivers/media/dvb-frontends/cx24120.c
new file mode 100644
index 000000000000..344d8b8e37e5
--- /dev/null
+++ b/drivers/media/dvb-frontends/cx24120.c
@@ -0,0 +1,1577 @@
+/*
+ Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner driver
+
+ Copyright (C) 2008 Patrick Boettcher <pb@linuxtv.org>
+ Copyright (C) 2009 Sergey Tyurin <forum.free-x.de>
+ Updated 2012 by Jannis Achstetter <jannis_achstetter@web.de>
+ Copyright (C) 2015 Jemma Denson <jdenson@gmail.com>
+ April 2015
+ Refactored & simplified driver
+ Updated to work with delivery system supplied by DVBv5
+ Add frequency, fec & pilot to get_frontend
+
+ Cards supported: Technisat Skystar S2
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+*/
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/firmware.h>
+#include "dvb_frontend.h"
+#include "cx24120.h"
+
+#define CX24120_SEARCH_RANGE_KHZ 5000
+#define CX24120_FIRMWARE "dvb-fe-cx24120-1.20.58.2.fw"
+
+/* cx24120 i2c registers */
+#define CX24120_REG_CMD_START (0x00) /* write cmd_id */
+#define CX24120_REG_CMD_ARGS (0x01) /* write command arguments */
+#define CX24120_REG_CMD_END (0x1f) /* write 0x01 for end */
+
+#define CX24120_REG_MAILBOX (0x33)
+#define CX24120_REG_FREQ3 (0x34) /* frequency */
+#define CX24120_REG_FREQ2 (0x35)
+#define CX24120_REG_FREQ1 (0x36)
+
+#define CX24120_REG_FECMODE (0x39) /* FEC status */
+#define CX24120_REG_STATUS (0x3a) /* Tuner status */
+#define CX24120_REG_SIGSTR_H (0x3a) /* Signal strength high */
+#define CX24120_REG_SIGSTR_L (0x3b) /* Signal strength low byte */
+#define CX24120_REG_QUALITY_H (0x40) /* SNR high byte */
+#define CX24120_REG_QUALITY_L (0x41) /* SNR low byte */
+
+#define CX24120_REG_BER_HH (0x47) /* BER high byte of high word */
+#define CX24120_REG_BER_HL (0x48) /* BER low byte of high word */
+#define CX24120_REG_BER_LH (0x49) /* BER high byte of low word */
+#define CX24120_REG_BER_LL (0x4a) /* BER low byte of low word */
+
+#define CX24120_REG_UCB_H (0x50) /* UCB high byte */
+#define CX24120_REG_UCB_L (0x51) /* UCB low byte */
+
+#define CX24120_REG_CLKDIV (0xe6)
+#define CX24120_REG_RATEDIV (0xf0)
+
+#define CX24120_REG_REVISION (0xff) /* Chip revision (ro) */
+
+
+/* Command messages */
+enum command_message_id {
+ CMD_VCO_SET = 0x10, /* cmd.len = 12; */
+ CMD_TUNEREQUEST = 0x11, /* cmd.len = 15; */
+
+ CMD_MPEG_ONOFF = 0x13, /* cmd.len = 4; */
+ CMD_MPEG_INIT = 0x14, /* cmd.len = 7; */
+ CMD_BANDWIDTH = 0x15, /* cmd.len = 12; */
+ CMD_CLOCK_READ = 0x16, /* read clock */
+ CMD_CLOCK_SET = 0x17, /* cmd.len = 10; */
+
+ CMD_DISEQC_MSG1 = 0x20, /* cmd.len = 11; */
+ CMD_DISEQC_MSG2 = 0x21, /* cmd.len = d->msg_len + 6; */
+ CMD_SETVOLTAGE = 0x22, /* cmd.len = 2; */
+ CMD_SETTONE = 0x23, /* cmd.len = 4; */
+ CMD_DISEQC_BURST = 0x24, /* cmd.len not used !!! */
+
+ CMD_READ_SNR = 0x1a, /* Read signal strength */
+ CMD_START_TUNER = 0x1b, /* ??? */
+
+ CMD_FWVERSION = 0x35,
+
+ CMD_TUNER_INIT = 0x3c, /* cmd.len = 0x03; */
+};
+
+#define CX24120_MAX_CMD_LEN 30
+
+/* pilot mask */
+#define CX24120_PILOT_OFF (0x00)
+#define CX24120_PILOT_ON (0x40)
+#define CX24120_PILOT_AUTO (0x80)
+
+/* signal status */
+#define CX24120_HAS_SIGNAL (0x01)
+#define CX24120_HAS_CARRIER (0x02)
+#define CX24120_HAS_VITERBI (0x04)
+#define CX24120_HAS_LOCK (0x08)
+#define CX24120_HAS_UNK1 (0x10)
+#define CX24120_HAS_UNK2 (0x20)
+#define CX24120_STATUS_MASK (0x0f)
+#define CX24120_SIGNAL_MASK (0xc0)
+
+#define info(args...) do { printk(KERN_INFO "cx24120: "); \
+ printk(args); } while (0)
+#define err(args...) do { printk(KERN_ERR "cx24120: ### ERROR: "); \
+ printk(args); } while (0)
+
+
+/* The Demod/Tuner can't easily provide these, we cache them */
+struct cx24120_tuning {
+ u32 frequency;
+ u32 symbol_rate;
+ fe_spectral_inversion_t inversion;
+ fe_code_rate_t fec;
+
+ fe_delivery_system_t delsys;
+ fe_modulation_t modulation;
+ fe_pilot_t pilot;
+
+ /* Demod values */
+ u8 fec_val;
+ u8 fec_mask;
+ u8 clkdiv;
+ u8 ratediv;
+ u8 inversion_val;
+ u8 pilot_val;
+};
+
+
+/* Private state */
+struct cx24120_state {
+ struct i2c_adapter *i2c;
+ const struct cx24120_config *config;
+ struct dvb_frontend frontend;
+
+ u8 cold_init;
+ u8 mpeg_enabled;
+
+ /* current and next tuning parameters */
+ struct cx24120_tuning dcur;
+ struct cx24120_tuning dnxt;
+};
+
+
+/* Command message to firmware */
+struct cx24120_cmd {
+ u8 id;
+ u8 len;
+ u8 arg[CX24120_MAX_CMD_LEN];
+};
+
+
+/* Read single register */
+static int cx24120_readreg(struct cx24120_state *state, u8 reg)
+{
+ int ret;
+ u8 buf = 0;
+ struct i2c_msg msg[] = {
+ { .addr = state->config->i2c_addr,
+ .flags = 0,
+ .len = 1,
+ .buf = &reg },
+
+ { .addr = state->config->i2c_addr,
+ .flags = I2C_M_RD,
+ .len = 1,
+ .buf = &buf }
+ };
+ ret = i2c_transfer(state->i2c, msg, 2);
+ if (ret != 2) {
+ err("Read error: reg=0x%02x, ret=0x%02x)\n", reg, ret);
+ return ret;
+ }
+
+ dev_dbg(&state->i2c->dev, "%s: reg=0x%02x; data=0x%02x\n",
+ __func__, reg, buf);
+
+ return buf;
+}
+
+
+/* Write single register */
+static int cx24120_writereg(struct cx24120_state *state, u8 reg, u8 data)
+{
+ u8 buf[] = { reg, data };
+ struct i2c_msg msg = {
+ .addr = state->config->i2c_addr,
+ .flags = 0,
+ .buf = buf,
+ .len = 2 };
+ int ret;
+
+ ret = i2c_transfer(state->i2c, &msg, 1);
+ if (ret != 1) {
+ err("Write error: i2c_write error(err == %i, 0x%02x: 0x%02x)\n",
+ ret, reg, data);
+ return ret;
+ }
+
+ dev_dbg(&state->i2c->dev, "%s: reg=0x%02x; data=0x%02x\n",
+ __func__, reg, data);
+
+ return 0;
+}
+
+
+/* Write multiple registers */
+static int cx24120_writeregN(struct cx24120_state *state,
+ u8 reg, const u8 *values, u16 len, u8 incr)
+{
+ int ret;
+ u8 buf[5]; /* maximum 4 data bytes at once - flexcop limitation
+ (very limited i2c-interface this one) */
+
+ struct i2c_msg msg = {
+ .addr = state->config->i2c_addr,
+ .flags = 0,
+ .buf = buf,
+ .len = len };
+
+ while (len) {
+ buf[0] = reg;
+ msg.len = len > 4 ? 4 : len;
+ memcpy(&buf[1], values, msg.len);
+
+ len -= msg.len; /* data length revers counter */
+ values += msg.len; /* incr data pointer */
+
+ if (incr)
+ reg += msg.len;
+ msg.len++; /* don't forget the addr byte */
+
+ ret = i2c_transfer(state->i2c, &msg, 1);
+ if (ret != 1) {
+ err("i2c_write error(err == %i, 0x%02x)\n", ret, reg);
+ return ret;
+ }
+
+ dev_dbg(&state->i2c->dev,
+ "%s: reg=0x%02x; data=0x%02x,0x%02x,0x%02x,0x%02x\n",
+ __func__, reg,
+ buf[1], buf[2], buf[3], buf[4]);
+
+ }
+
+ return 0;
+}
+
+
+static struct dvb_frontend_ops cx24120_ops;
+
+struct dvb_frontend *cx24120_attach(const struct cx24120_config *config,
+ struct i2c_adapter *i2c)
+{
+ struct cx24120_state *state = NULL;
+ int demod_rev;
+
+ info("Conexant cx24120/cx24118 - DVBS/S2 Satellite demod/tuner\n");
+ state = kzalloc(sizeof(struct cx24120_state),
+ GFP_KERNEL);
+ if (state == NULL) {
+ err("Unable to allocate memory for cx24120_state\n");
+ goto error;
+ }
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+
+ /* check if the demod is present and has proper type */
+ demod_rev = cx24120_readreg(state, CX24120_REG_REVISION);
+ switch (demod_rev) {
+ case 0x07:
+ info("Demod cx24120 rev. 0x07 detected.\n");
+ break;
+ case 0x05:
+ info("Demod cx24120 rev. 0x05 detected.\n");
+ break;
+ default:
+ err("Unsupported demod revision: 0x%x detected.\n",
+ demod_rev);
+ goto error;
+ }
+
+ /* create dvb_frontend */
+ state->cold_init = 0;
+ memcpy(&state->frontend.ops, &cx24120_ops,
+ sizeof(struct dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+
+ info("Conexant cx24120/cx24118 attached.\n");
+ return &state->frontend;
+
+error:
+ kfree(state);
+ return NULL;
+}
+EXPORT_SYMBOL(cx24120_attach);
+
+static int cx24120_test_rom(struct cx24120_state *state)
+{
+ int err, ret;
+
+ err = cx24120_readreg(state, 0xfd);
+ if (err & 4) {
+ ret = cx24120_readreg(state, 0xdf) & 0xfe;
+ err = cx24120_writereg(state, 0xdf, ret);
+ }
+ return err;
+}
+
+
+static int cx24120_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+
+ *snr = (cx24120_readreg(state, CX24120_REG_QUALITY_H)<<8) |
+ (cx24120_readreg(state, CX24120_REG_QUALITY_L));
+ dev_dbg(&state->i2c->dev, "%s: read SNR index = %d\n",
+ __func__, *snr);
+
+ return 0;
+}
+
+
+static int cx24120_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+
+ *ber = (cx24120_readreg(state, CX24120_REG_BER_HH) << 24) |
+ (cx24120_readreg(state, CX24120_REG_BER_HL) << 16) |
+ (cx24120_readreg(state, CX24120_REG_BER_LH) << 8) |
+ cx24120_readreg(state, CX24120_REG_BER_LL);
+ dev_dbg(&state->i2c->dev, "%s: read BER index = %d\n",
+ __func__, *ber);
+
+ return 0;
+}
+
+static int cx24120_msg_mpeg_output_global_config(struct cx24120_state *state,
+ u8 flag);
+
+/* Check if we're running a command that needs to disable mpeg out */
+static void cx24120_check_cmd(struct cx24120_state *state, u8 id)
+{
+ switch (id) {
+ case CMD_TUNEREQUEST:
+ case CMD_CLOCK_READ:
+ case CMD_DISEQC_MSG1:
+ case CMD_DISEQC_MSG2:
+ case CMD_SETVOLTAGE:
+ case CMD_SETTONE:
+ cx24120_msg_mpeg_output_global_config(state, 0);
+ /* Old driver would do a msleep(100) here */
+ default:
+ return;
+ }
+}
+
+
+/* Send a message to the firmware */
+static int cx24120_message_send(struct cx24120_state *state,
+ struct cx24120_cmd *cmd)
+{
+ int ret, ficus;
+
+ if (state->mpeg_enabled) {
+ /* Disable mpeg out on certain commands */
+ cx24120_check_cmd(state, cmd->id);
+ }
+
+ ret = cx24120_writereg(state, CX24120_REG_CMD_START, cmd->id);
+ ret = cx24120_writeregN(state, CX24120_REG_CMD_ARGS, &cmd->arg[0],
+ cmd->len, 1);
+ ret = cx24120_writereg(state, CX24120_REG_CMD_END, 0x01);
+
+ ficus = 1000;
+ while (cx24120_readreg(state, CX24120_REG_CMD_END)) {
+ msleep(20);
+ ficus -= 20;
+ if (ficus == 0) {
+ err("Error sending message to firmware\n");
+ return -EREMOTEIO;
+ }
+ }
+ dev_dbg(&state->i2c->dev, "%s: Successfully send message 0x%02x\n",
+ __func__, cmd->id);
+
+ return 0;
+}
+
+/* Send a message and fill arg[] with the results */
+static int cx24120_message_sendrcv(struct cx24120_state *state,
+ struct cx24120_cmd *cmd, u8 numreg)
+{
+ int ret, i;
+
+ if (numreg > CX24120_MAX_CMD_LEN) {
+ err("Too many registers to read. cmd->reg = %d", numreg);
+ return -EREMOTEIO;
+ }
+
+ ret = cx24120_message_send(state, cmd);
+ if (ret != 0)
+ return ret;
+
+ if (!numreg)
+ return 0;
+
+ /* Read numreg registers starting from register cmd->len */
+ for (i = 0; i < numreg; i++)
+ cmd->arg[i] = cx24120_readreg(state, (cmd->len+i+1));
+
+ return 0;
+}
+
+
+
+static int cx24120_read_signal_strength(struct dvb_frontend *fe,
+ u16 *signal_strength)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct cx24120_cmd cmd;
+ int ret, sigstr_h, sigstr_l;
+
+ cmd.id = CMD_READ_SNR;
+ cmd.len = 1;
+ cmd.arg[0] = 0x00;
+
+ ret = cx24120_message_send(state, &cmd);
+ if (ret != 0) {
+ err("error reading signal strength\n");
+ return -EREMOTEIO;
+ }
+
+ /* raw */
+ sigstr_h = (cx24120_readreg(state, CX24120_REG_SIGSTR_H) >> 6) << 8;
+ sigstr_l = cx24120_readreg(state, CX24120_REG_SIGSTR_L);
+ dev_dbg(&state->i2c->dev, "%s: Signal strength from firmware= 0x%x\n",
+ __func__, (sigstr_h | sigstr_l));
+
+ /* cooked */
+ *signal_strength = ((sigstr_h | sigstr_l) << 5) & 0x0000ffff;
+ dev_dbg(&state->i2c->dev, "%s: Signal strength= 0x%x\n",
+ __func__, *signal_strength);
+
+ return 0;
+}
+
+
+static int cx24120_msg_mpeg_output_global_config(struct cx24120_state *state,
+ u8 enable)
+{
+ struct cx24120_cmd cmd;
+ int ret;
+
+ cmd.id = CMD_MPEG_ONOFF;
+ cmd.len = 4;
+ cmd.arg[0] = 0x01;
+ cmd.arg[1] = 0x00;
+ cmd.arg[2] = enable ? 0 : (u8)(-1);
+ cmd.arg[3] = 0x01;
+
+ ret = cx24120_message_send(state, &cmd);
+ if (ret != 0) {
+ dev_dbg(&state->i2c->dev,
+ "%s: Failed to set MPEG output to %s\n",
+ __func__,
+ (enable)?"enabled":"disabled");
+ return ret;
+ }
+
+ state->mpeg_enabled = enable;
+ dev_dbg(&state->i2c->dev, "%s: MPEG output %s\n",
+ __func__,
+ (enable)?"enabled":"disabled");
+
+ return 0;
+}
+
+
+static int cx24120_msg_mpeg_output_config(struct cx24120_state *state, u8 seq)
+{
+ struct cx24120_cmd cmd;
+ struct cx24120_initial_mpeg_config i =
+ state->config->initial_mpeg_config;
+
+ cmd.id = CMD_MPEG_INIT;
+ cmd.len = 7;
+ cmd.arg[0] = seq; /* sequental number - can be 0,1,2 */
+ cmd.arg[1] = ((i.x1 & 0x01) << 1) | ((i.x1 >> 1) & 0x01);
+ cmd.arg[2] = 0x05;
+ cmd.arg[3] = 0x02;
+ cmd.arg[4] = ((i.x2 >> 1) & 0x01);
+ cmd.arg[5] = (i.x2 & 0xf0) | (i.x3 & 0x0f);
+ cmd.arg[6] = 0x10;
+
+ return cx24120_message_send(state, &cmd);
+}
+
+
+static int cx24120_diseqc_send_burst(struct dvb_frontend *fe,
+ fe_sec_mini_cmd_t burst)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct cx24120_cmd cmd;
+
+ /* Yes, cmd.len is set to zero. The old driver
+ * didn't specify any len, but also had a
+ * memset 0 before every use of the cmd struct
+ * which would have set it to zero.
+ * This quite probably needs looking into.
+ */
+ cmd.id = CMD_DISEQC_BURST;
+ cmd.len = 0;
+ cmd.arg[0] = 0x00;
+ if (burst)
+ cmd.arg[1] = 0x01;
+ dev_dbg(&state->i2c->dev, "%s: burst sent.\n", __func__);
+
+ return cx24120_message_send(state, &cmd);
+}
+
+
+static int cx24120_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct cx24120_cmd cmd;
+
+ dev_dbg(&state->i2c->dev, "%s(%d)\n",
+ __func__, tone);
+
+ if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) {
+ err("Invalid tone=%d\n", tone);
+ return -EINVAL;
+ }
+
+ cmd.id = CMD_SETTONE;
+ cmd.len = 4;
+ cmd.arg[0] = 0x00;
+ cmd.arg[1] = 0x00;
+ cmd.arg[2] = 0x00;
+ cmd.arg[3] = (tone == SEC_TONE_ON)?0x01:0x00;
+
+ return cx24120_message_send(state, &cmd);
+}
+
+
+static int cx24120_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct cx24120_cmd cmd;
+
+ dev_dbg(&state->i2c->dev, "%s(%d)\n",
+ __func__, voltage);
+
+ cmd.id = CMD_SETVOLTAGE;
+ cmd.len = 2;
+ cmd.arg[0] = 0x00;
+ cmd.arg[1] = (voltage == SEC_VOLTAGE_18)?0x01:0x00;
+
+ return cx24120_message_send(state, &cmd);
+}
+
+
+static int cx24120_send_diseqc_msg(struct dvb_frontend *fe,
+ struct dvb_diseqc_master_cmd *d)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct cx24120_cmd cmd;
+ int back_count;
+
+ dev_dbg(&state->i2c->dev, "%s()\n", __func__);
+
+ cmd.id = CMD_DISEQC_MSG1;
+ cmd.len = 11;
+ cmd.arg[0] = 0x00;
+ cmd.arg[1] = 0x00;
+ cmd.arg[2] = 0x03;
+ cmd.arg[3] = 0x16;
+ cmd.arg[4] = 0x28;
+ cmd.arg[5] = 0x01;
+ cmd.arg[6] = 0x01;
+ cmd.arg[7] = 0x14;
+ cmd.arg[8] = 0x19;
+ cmd.arg[9] = 0x14;
+ cmd.arg[10] = 0x1e;
+
+ if (cx24120_message_send(state, &cmd)) {
+ err("send 1st message(0x%x) failed\n", cmd.id);
+ return -EREMOTEIO;
+ }
+
+ cmd.id = CMD_DISEQC_MSG2;
+ cmd.len = d->msg_len + 6;
+ cmd.arg[0] = 0x00;
+ cmd.arg[1] = 0x01;
+ cmd.arg[2] = 0x02;
+ cmd.arg[3] = 0x00;
+ cmd.arg[4] = 0x00;
+ cmd.arg[5] = d->msg_len;
+
+ memcpy(&cmd.arg[6], &d->msg, d->msg_len);
+
+ if (cx24120_message_send(state, &cmd)) {
+ err("send 2nd message(0x%x) failed\n", cmd.id);
+ return -EREMOTEIO;
+ }
+
+ back_count = 500;
+ do {
+ if (!(cx24120_readreg(state, 0x93) & 0x01)) {
+ dev_dbg(&state->i2c->dev,
+ "%s: diseqc sequence sent success\n",
+ __func__);
+ return 0;
+ }
+ msleep(20);
+ back_count -= 20;
+ } while (back_count);
+
+ err("Too long waiting for diseqc.\n");
+ return -ETIMEDOUT;
+}
+
+
+/* Read current tuning status */
+static int cx24120_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ int lock;
+
+ lock = cx24120_readreg(state, CX24120_REG_STATUS);
+
+ dev_dbg(&state->i2c->dev, "%s() status = 0x%02x\n",
+ __func__, lock);
+
+ *status = 0;
+
+ if (lock & CX24120_HAS_SIGNAL)
+ *status = FE_HAS_SIGNAL;
+ if (lock & CX24120_HAS_CARRIER)
+ *status |= FE_HAS_CARRIER;
+ if (lock & CX24120_HAS_VITERBI)
+ *status |= FE_HAS_VITERBI | FE_HAS_SYNC;
+ if (lock & CX24120_HAS_LOCK)
+ *status |= FE_HAS_LOCK;
+
+ /* TODO: is FE_HAS_SYNC in the right place?
+ * Other cx241xx drivers have this slightly
+ * different */
+
+ return 0;
+}
+
+
+/* FEC & modulation lookup table
+ * Used for decoding the REG_FECMODE register
+ * once tuned in.
+ */
+static struct cx24120_modfec {
+ fe_delivery_system_t delsys;
+ fe_modulation_t mod;
+ fe_code_rate_t fec;
+ u8 val;
+} modfec_lookup_table[] = {
+/*delsys mod fec val */
+{ SYS_DVBS, QPSK, FEC_1_2, 0x01 },
+{ SYS_DVBS, QPSK, FEC_2_3, 0x02 },
+{ SYS_DVBS, QPSK, FEC_3_4, 0x03 },
+{ SYS_DVBS, QPSK, FEC_4_5, 0x04 },
+{ SYS_DVBS, QPSK, FEC_5_6, 0x05 },
+{ SYS_DVBS, QPSK, FEC_6_7, 0x06 },
+{ SYS_DVBS, QPSK, FEC_7_8, 0x07 },
+
+{ SYS_DVBS2, QPSK, FEC_1_2, 0x04 },
+{ SYS_DVBS2, QPSK, FEC_3_5, 0x05 },
+{ SYS_DVBS2, QPSK, FEC_2_3, 0x06 },
+{ SYS_DVBS2, QPSK, FEC_3_4, 0x07 },
+{ SYS_DVBS2, QPSK, FEC_4_5, 0x08 },
+{ SYS_DVBS2, QPSK, FEC_5_6, 0x09 },
+{ SYS_DVBS2, QPSK, FEC_8_9, 0x0a },
+{ SYS_DVBS2, QPSK, FEC_9_10, 0x0b },
+
+{ SYS_DVBS2, PSK_8, FEC_3_5, 0x0c },
+{ SYS_DVBS2, PSK_8, FEC_2_3, 0x0d },
+{ SYS_DVBS2, PSK_8, FEC_3_4, 0x0e },
+{ SYS_DVBS2, PSK_8, FEC_5_6, 0x0f },
+{ SYS_DVBS2, PSK_8, FEC_8_9, 0x10 },
+{ SYS_DVBS2, PSK_8, FEC_9_10, 0x11 },
+};
+
+
+/* Retrieve current fec, modulation & pilot values */
+static int cx24120_get_fec(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct cx24120_state *state = fe->demodulator_priv;
+ int idx;
+ int ret;
+ int GettedFEC;
+
+ dev_dbg(&state->i2c->dev, "%s()\n", __func__);
+
+ ret = cx24120_readreg(state, CX24120_REG_FECMODE);
+ GettedFEC = ret & 0x3f; /* Lower 6 bits */
+
+ dev_dbg(&state->i2c->dev, "%s: Get FEC: %d\n", __func__, GettedFEC);
+
+ for (idx = 0; idx < ARRAY_SIZE(modfec_lookup_table); idx++) {
+ if (modfec_lookup_table[idx].delsys != state->dcur.delsys)
+ continue;
+ if (modfec_lookup_table[idx].val != GettedFEC)
+ continue;
+
+ break; /* found */
+ }
+
+ if (idx >= ARRAY_SIZE(modfec_lookup_table)) {
+ dev_dbg(&state->i2c->dev, "%s: Couldn't find fec!\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* save values back to cache */
+ c->modulation = modfec_lookup_table[idx].mod;
+ c->fec_inner = modfec_lookup_table[idx].fec;
+ c->pilot = (ret & 0x80) ? PILOT_ON : PILOT_OFF;
+
+ dev_dbg(&state->i2c->dev,
+ "%s: mod(%d), fec(%d), pilot(%d)\n",
+ __func__,
+ c->modulation, c->fec_inner, c->pilot);
+
+ return 0;
+}
+
+
+/* Clock ratios lookup table
+ *
+ * Values obtained from much larger table in old driver
+ * which had numerous entries which would never match.
+ *
+ * There's probably some way of calculating these but I
+ * can't determine the pattern
+*/
+static struct cx24120_clock_ratios_table {
+ fe_delivery_system_t delsys;
+ fe_pilot_t pilot;
+ fe_modulation_t mod;
+ fe_code_rate_t fec;
+ u32 m_rat;
+ u32 n_rat;
+ u32 rate;
+} clock_ratios_table[] = {
+/*delsys pilot mod fec m_rat n_rat rate */
+{ SYS_DVBS2, PILOT_OFF, QPSK, FEC_1_2, 273088, 254505, 274 },
+{ SYS_DVBS2, PILOT_OFF, QPSK, FEC_3_5, 17272, 13395, 330 },
+{ SYS_DVBS2, PILOT_OFF, QPSK, FEC_2_3, 24344, 16967, 367 },
+{ SYS_DVBS2, PILOT_OFF, QPSK, FEC_3_4, 410788, 254505, 413 },
+{ SYS_DVBS2, PILOT_OFF, QPSK, FEC_4_5, 438328, 254505, 440 },
+{ SYS_DVBS2, PILOT_OFF, QPSK, FEC_5_6, 30464, 16967, 459 },
+{ SYS_DVBS2, PILOT_OFF, QPSK, FEC_8_9, 487832, 254505, 490 },
+{ SYS_DVBS2, PILOT_OFF, QPSK, FEC_9_10, 493952, 254505, 496 },
+{ SYS_DVBS2, PILOT_OFF, PSK_8, FEC_3_5, 328168, 169905, 494 },
+{ SYS_DVBS2, PILOT_OFF, PSK_8, FEC_2_3, 24344, 11327, 550 },
+{ SYS_DVBS2, PILOT_OFF, PSK_8, FEC_3_4, 410788, 169905, 618 },
+{ SYS_DVBS2, PILOT_OFF, PSK_8, FEC_5_6, 30464, 11327, 688 },
+{ SYS_DVBS2, PILOT_OFF, PSK_8, FEC_8_9, 487832, 169905, 735 },
+{ SYS_DVBS2, PILOT_OFF, PSK_8, FEC_9_10, 493952, 169905, 744 },
+{ SYS_DVBS2, PILOT_ON, QPSK, FEC_1_2, 273088, 260709, 268 },
+{ SYS_DVBS2, PILOT_ON, QPSK, FEC_3_5, 328168, 260709, 322 },
+{ SYS_DVBS2, PILOT_ON, QPSK, FEC_2_3, 121720, 86903, 358 },
+{ SYS_DVBS2, PILOT_ON, QPSK, FEC_3_4, 410788, 260709, 403 },
+{ SYS_DVBS2, PILOT_ON, QPSK, FEC_4_5, 438328, 260709, 430 },
+{ SYS_DVBS2, PILOT_ON, QPSK, FEC_5_6, 152320, 86903, 448 },
+{ SYS_DVBS2, PILOT_ON, QPSK, FEC_8_9, 487832, 260709, 479 },
+{ SYS_DVBS2, PILOT_ON, QPSK, FEC_9_10, 493952, 260709, 485 },
+{ SYS_DVBS2, PILOT_ON, PSK_8, FEC_3_5, 328168, 173853, 483 },
+{ SYS_DVBS2, PILOT_ON, PSK_8, FEC_2_3, 121720, 57951, 537 },
+{ SYS_DVBS2, PILOT_ON, PSK_8, FEC_3_4, 410788, 173853, 604 },
+{ SYS_DVBS2, PILOT_ON, PSK_8, FEC_5_6, 152320, 57951, 672 },
+{ SYS_DVBS2, PILOT_ON, PSK_8, FEC_8_9, 487832, 173853, 718 },
+{ SYS_DVBS2, PILOT_ON, PSK_8, FEC_9_10, 493952, 173853, 727 },
+{ SYS_DVBS, PILOT_OFF, QPSK, FEC_1_2, 152592, 152592, 256 },
+{ SYS_DVBS, PILOT_OFF, QPSK, FEC_2_3, 305184, 228888, 341 },
+{ SYS_DVBS, PILOT_OFF, QPSK, FEC_3_4, 457776, 305184, 384 },
+{ SYS_DVBS, PILOT_OFF, QPSK, FEC_5_6, 762960, 457776, 427 },
+{ SYS_DVBS, PILOT_OFF, QPSK, FEC_7_8, 1068144, 610368, 448 },
+};
+
+
+/* Set clock ratio from lookup table */
+static void cx24120_set_clock_ratios(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct cx24120_cmd cmd;
+ int ret, idx;
+
+ /* Find fec, modulation, pilot */
+ ret = cx24120_get_fec(fe);
+ if (ret != 0)
+ return;
+
+ /* Find the clock ratios in the lookup table */
+ for (idx = 0; idx < ARRAY_SIZE(clock_ratios_table); idx++) {
+ if (clock_ratios_table[idx].delsys != state->dcur.delsys)
+ continue;
+ if (clock_ratios_table[idx].mod != c->modulation)
+ continue;
+ if (clock_ratios_table[idx].fec != c->fec_inner)
+ continue;
+ if (clock_ratios_table[idx].pilot != c->pilot)
+ continue;
+
+ break; /* found */
+ }
+
+ if (idx >= ARRAY_SIZE(clock_ratios_table)) {
+ info("Clock ratio not found - data reception in danger\n");
+ return;
+ }
+
+
+ /* Read current values? */
+ cmd.id = CMD_CLOCK_READ;
+ cmd.len = 1;
+ cmd.arg[0] = 0x00;
+ ret = cx24120_message_sendrcv(state, &cmd, 6);
+ if (ret != 0)
+ return;
+ /* in cmd[0]-[5] - result */
+
+ dev_dbg(&state->i2c->dev,
+ "%s: m=%d, n=%d; idx: %d m=%d, n=%d, rate=%d\n",
+ __func__,
+ cmd.arg[2] | (cmd.arg[1] << 8) | (cmd.arg[0] << 16),
+ cmd.arg[5] | (cmd.arg[4] << 8) | (cmd.arg[3] << 16),
+ idx,
+ clock_ratios_table[idx].m_rat,
+ clock_ratios_table[idx].n_rat,
+ clock_ratios_table[idx].rate);
+
+
+
+ /* Set the clock */
+ cmd.id = CMD_CLOCK_SET;
+ cmd.len = 10;
+ cmd.arg[0] = 0;
+ cmd.arg[1] = 0x10;
+ cmd.arg[2] = (clock_ratios_table[idx].m_rat >> 16) & 0xff;
+ cmd.arg[3] = (clock_ratios_table[idx].m_rat >> 8) & 0xff;
+ cmd.arg[4] = (clock_ratios_table[idx].m_rat >> 0) & 0xff;
+ cmd.arg[5] = (clock_ratios_table[idx].n_rat >> 16) & 0xff;
+ cmd.arg[6] = (clock_ratios_table[idx].n_rat >> 8) & 0xff;
+ cmd.arg[7] = (clock_ratios_table[idx].n_rat >> 0) & 0xff;
+ cmd.arg[8] = (clock_ratios_table[idx].rate >> 8) & 0xff;
+ cmd.arg[9] = (clock_ratios_table[idx].rate >> 0) & 0xff;
+
+ cx24120_message_send(state, &cmd);
+
+}
+
+
+/* Set inversion value */
+static int cx24120_set_inversion(struct cx24120_state *state,
+ fe_spectral_inversion_t inversion)
+{
+ dev_dbg(&state->i2c->dev, "%s(%d)\n",
+ __func__, inversion);
+
+ switch (inversion) {
+ case INVERSION_OFF:
+ state->dnxt.inversion_val = 0x00;
+ break;
+ case INVERSION_ON:
+ state->dnxt.inversion_val = 0x04;
+ break;
+ case INVERSION_AUTO:
+ state->dnxt.inversion_val = 0x0c;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ state->dnxt.inversion = inversion;
+
+ return 0;
+}
+
+/* FEC lookup table for tuning
+ * Some DVB-S2 val's have been found by trial
+ * and error. Sofar it seems to match up with
+ * the contents of the REG_FECMODE after tuning
+ * The rest will probably be the same but would
+ * need testing.
+ * Anything not in the table will run with
+ * FEC_AUTO and take a while longer to tune in
+ * ( c.500ms instead of 30ms )
+ */
+static struct cx24120_modfec_table {
+ fe_delivery_system_t delsys;
+ fe_modulation_t mod;
+ fe_code_rate_t fec;
+ u8 val;
+} modfec_table[] = {
+/*delsys mod fec val */
+{ SYS_DVBS, QPSK, FEC_1_2, 0x2e },
+{ SYS_DVBS, QPSK, FEC_2_3, 0x2f },
+{ SYS_DVBS, QPSK, FEC_3_4, 0x30 },
+{ SYS_DVBS, QPSK, FEC_5_6, 0x31 },
+{ SYS_DVBS, QPSK, FEC_6_7, 0x32 },
+{ SYS_DVBS, QPSK, FEC_7_8, 0x33 },
+
+{ SYS_DVBS2, QPSK, FEC_3_4, 0x07 },
+
+{ SYS_DVBS2, PSK_8, FEC_2_3, 0x0d },
+{ SYS_DVBS2, PSK_8, FEC_3_4, 0x0e },
+};
+
+/* Set fec_val & fec_mask values from delsys, modulation & fec */
+static int cx24120_set_fec(struct cx24120_state *state,
+ fe_modulation_t mod, fe_code_rate_t fec)
+{
+ int idx;
+
+ dev_dbg(&state->i2c->dev,
+ "%s(0x%02x,0x%02x)\n", __func__, mod, fec);
+
+ state->dnxt.fec = fec;
+
+ /* Lookup fec_val from modfec table */
+ for (idx = 0; idx < ARRAY_SIZE(modfec_table); idx++) {
+ if (modfec_table[idx].delsys != state->dnxt.delsys)
+ continue;
+ if (modfec_table[idx].mod != mod)
+ continue;
+ if (modfec_table[idx].fec != fec)
+ continue;
+
+ /* found */
+ state->dnxt.fec_mask = 0x00;
+ state->dnxt.fec_val = modfec_table[idx].val;
+ return 0;
+ }
+
+
+ if (state->dnxt.delsys == SYS_DVBS2) {
+ /* DVBS2 auto is 0x00/0x00 */
+ state->dnxt.fec_mask = 0x00;
+ state->dnxt.fec_val = 0x00;
+ } else {
+ /* Set DVB-S to auto */
+ state->dnxt.fec_val = 0x2e;
+ state->dnxt.fec_mask = 0xac;
+ }
+
+ return 0;
+}
+
+
+/* Set pilot */
+static int cx24120_set_pilot(struct cx24120_state *state,
+ fe_pilot_t pilot) {
+
+ dev_dbg(&state->i2c->dev,
+ "%s(%d)\n", __func__, pilot);
+
+ /* Pilot only valid in DVBS2 */
+ if (state->dnxt.delsys != SYS_DVBS2) {
+ state->dnxt.pilot_val = CX24120_PILOT_OFF;
+ return 0;
+ }
+
+
+ switch (pilot) {
+ case PILOT_OFF:
+ state->dnxt.pilot_val = CX24120_PILOT_OFF;
+ break;
+ case PILOT_ON:
+ state->dnxt.pilot_val = CX24120_PILOT_ON;
+ break;
+ case PILOT_AUTO:
+ default:
+ state->dnxt.pilot_val = CX24120_PILOT_AUTO;
+ }
+
+ return 0;
+}
+
+/* Set symbol rate */
+static int cx24120_set_symbolrate(struct cx24120_state *state, u32 rate)
+{
+ dev_dbg(&state->i2c->dev, "%s(%d)\n",
+ __func__, rate);
+
+ state->dnxt.symbol_rate = rate;
+
+ /* Check symbol rate */
+ if (rate > 31000000) {
+ state->dnxt.clkdiv = (-(rate < 31000001) & 3) + 2;
+ state->dnxt.ratediv = (-(rate < 31000001) & 6) + 4;
+ } else {
+ state->dnxt.clkdiv = 3;
+ state->dnxt.ratediv = 6;
+ }
+
+ return 0;
+}
+
+
+/* Overwrite the current tuning params, we are about to tune */
+static void cx24120_clone_params(struct dvb_frontend *fe)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+
+ state->dcur = state->dnxt;
+}
+
+
+/* Table of time to tune for different symrates */
+static struct cx24120_symrate_delay {
+ fe_delivery_system_t delsys;
+ u32 symrate; /* Check for >= this symrate */
+ u32 delay; /* Timeout in ms */
+} symrates_delay_table[] = {
+{ SYS_DVBS, 10000000, 400 },
+{ SYS_DVBS, 8000000, 2000 },
+{ SYS_DVBS, 6000000, 5000 },
+{ SYS_DVBS, 3000000, 10000 },
+{ SYS_DVBS, 0, 15000 },
+{ SYS_DVBS2, 10000000, 600 }, /* DVBS2 needs a little longer */
+{ SYS_DVBS2, 8000000, 2000 }, /* (so these might need bumping too) */
+{ SYS_DVBS2, 6000000, 5000 },
+{ SYS_DVBS2, 3000000, 10000 },
+{ SYS_DVBS2, 0, 15000 },
+};
+
+
+static int cx24120_set_frontend(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct cx24120_cmd cmd;
+ int ret;
+ int delay_cnt, sd_idx = 0;
+ fe_status_t status;
+
+ switch (c->delivery_system) {
+ case SYS_DVBS2:
+ dev_dbg(&state->i2c->dev, "%s() DVB-S2\n",
+ __func__);
+ break;
+ case SYS_DVBS:
+ dev_dbg(&state->i2c->dev, "%s() DVB-S\n",
+ __func__);
+ break;
+ default:
+ dev_dbg(&state->i2c->dev,
+ "%s() Delivery system(%d) not supported\n",
+ __func__, c->delivery_system);
+ ret = -EINVAL;
+ break;
+ }
+
+
+ state->dnxt.delsys = c->delivery_system;
+ state->dnxt.modulation = c->modulation;
+ state->dnxt.frequency = c->frequency;
+ state->dnxt.pilot = c->pilot;
+
+ ret = cx24120_set_inversion(state, c->inversion);
+ if (ret != 0)
+ return ret;
+
+ ret = cx24120_set_fec(state, c->modulation, c->fec_inner);
+ if (ret != 0)
+ return ret;
+
+ ret = cx24120_set_pilot(state, c->pilot);
+ if (ret != 0)
+ return ret;
+
+ ret = cx24120_set_symbolrate(state, c->symbol_rate);
+ if (ret != 0)
+ return ret;
+
+
+ /* discard the 'current' tuning parameters and prepare to tune */
+ cx24120_clone_params(fe);
+
+ dev_dbg(&state->i2c->dev,
+ "%s: delsys = %d\n", __func__, state->dcur.delsys);
+ dev_dbg(&state->i2c->dev,
+ "%s: modulation = %d\n", __func__, state->dcur.modulation);
+ dev_dbg(&state->i2c->dev,
+ "%s: frequency = %d\n", __func__, state->dcur.frequency);
+ dev_dbg(&state->i2c->dev,
+ "%s: pilot = %d (val = 0x%02x)\n", __func__,
+ state->dcur.pilot, state->dcur.pilot_val);
+ dev_dbg(&state->i2c->dev,
+ "%s: symbol_rate = %d (clkdiv/ratediv = 0x%02x/0x%02x)\n",
+ __func__, state->dcur.symbol_rate,
+ state->dcur.clkdiv, state->dcur.ratediv);
+ dev_dbg(&state->i2c->dev,
+ "%s: FEC = %d (mask/val = 0x%02x/0x%02x)\n", __func__,
+ state->dcur.fec, state->dcur.fec_mask, state->dcur.fec_val);
+ dev_dbg(&state->i2c->dev,
+ "%s: Inversion = %d (val = 0x%02x)\n", __func__,
+ state->dcur.inversion, state->dcur.inversion_val);
+
+
+
+ /* Tune in */
+ cmd.id = CMD_TUNEREQUEST;
+ cmd.len = 15;
+ cmd.arg[0] = 0;
+ cmd.arg[1] = (state->dcur.frequency & 0xff0000) >> 16;
+ cmd.arg[2] = (state->dcur.frequency & 0x00ff00) >> 8;
+ cmd.arg[3] = (state->dcur.frequency & 0x0000ff);
+ cmd.arg[4] = ((state->dcur.symbol_rate/1000) & 0xff00) >> 8;
+ cmd.arg[5] = ((state->dcur.symbol_rate/1000) & 0x00ff);
+ cmd.arg[6] = state->dcur.inversion;
+ cmd.arg[7] = state->dcur.fec_val | state->dcur.pilot_val;
+ cmd.arg[8] = CX24120_SEARCH_RANGE_KHZ >> 8;
+ cmd.arg[9] = CX24120_SEARCH_RANGE_KHZ & 0xff;
+ cmd.arg[10] = 0; /* maybe rolloff? */
+ cmd.arg[11] = state->dcur.fec_mask;
+ cmd.arg[12] = state->dcur.ratediv;
+ cmd.arg[13] = state->dcur.clkdiv;
+ cmd.arg[14] = 0;
+
+
+ /* Send tune command */
+ ret = cx24120_message_send(state, &cmd);
+ if (ret != 0)
+ return ret;
+
+ /* Write symbol rate values */
+ ret = cx24120_writereg(state, CX24120_REG_CLKDIV, state->dcur.clkdiv);
+ ret = cx24120_readreg(state, CX24120_REG_RATEDIV);
+ ret &= 0xfffffff0;
+ ret |= state->dcur.ratediv;
+ ret = cx24120_writereg(state, CX24120_REG_RATEDIV, ret);
+
+ /* Default time to tune */
+ delay_cnt = 500;
+
+ /* Establish time to tune from symrates_delay_table */
+ for (sd_idx = 0; sd_idx < ARRAY_SIZE(symrates_delay_table); sd_idx++) {
+ if (state->dcur.delsys != symrates_delay_table[sd_idx].delsys)
+ continue;
+ if (c->symbol_rate < symrates_delay_table[sd_idx].symrate)
+ continue;
+
+ /* found */
+ delay_cnt = symrates_delay_table[sd_idx].delay;
+ dev_dbg(&state->i2c->dev, "%s: Found symrate delay = %d\n",
+ __func__, delay_cnt);
+ break;
+ }
+
+ /* Wait for tuning */
+ while (delay_cnt >= 0) {
+ cx24120_read_status(fe, &status);
+ if (status & FE_HAS_LOCK)
+ goto tuned;
+ msleep(20);
+ delay_cnt -= 20;
+ }
+
+
+ /* Fail to tune */
+ dev_dbg(&state->i2c->dev, "%s: Tuning failed\n",
+ __func__);
+
+ return -EINVAL;
+
+
+tuned:
+ dev_dbg(&state->i2c->dev, "%s: Tuning successful\n",
+ __func__);
+
+ /* Set clock ratios */
+ cx24120_set_clock_ratios(fe);
+
+ /* Old driver would do a msleep(200) here */
+
+ /* Renable mpeg output */
+ if (!state->mpeg_enabled)
+ cx24120_msg_mpeg_output_global_config(state, 1);
+
+ return 0;
+}
+
+
+/* Calculate vco from config */
+static u64 cx24120_calculate_vco(struct cx24120_state *state)
+{
+ u32 vco;
+ u64 inv_vco, res, xxyyzz;
+ u32 xtal_khz = state->config->xtal_khz;
+
+ xxyyzz = 0x400000000ULL;
+ vco = xtal_khz * 10 * 4;
+ inv_vco = xxyyzz / vco;
+ res = xxyyzz % vco;
+
+ if (inv_vco > xtal_khz * 10 * 2)
+ ++inv_vco;
+
+ dev_dbg(&state->i2c->dev,
+ "%s: xtal=%d, vco=%d, inv_vco=%lld, res=%lld\n",
+ __func__, xtal_khz, vco, inv_vco, res);
+
+ return inv_vco;
+}
+
+
+int cx24120_init(struct dvb_frontend *fe)
+{
+ const struct firmware *fw;
+ struct cx24120_state *state = fe->demodulator_priv;
+ struct cx24120_cmd cmd;
+ u8 ret, ret_EA, reg1;
+ u64 inv_vco;
+ int reset_result;
+
+ int i;
+ unsigned char vers[4];
+
+ if (state->cold_init)
+ return 0;
+
+ /* ???? */
+ ret = cx24120_writereg(state, 0xea, 0x00);
+ ret = cx24120_test_rom(state);
+ ret = cx24120_readreg(state, 0xfb) & 0xfe;
+ ret = cx24120_writereg(state, 0xfb, ret);
+ ret = cx24120_readreg(state, 0xfc) & 0xfe;
+ ret = cx24120_writereg(state, 0xfc, ret);
+ ret = cx24120_writereg(state, 0xc3, 0x04);
+ ret = cx24120_writereg(state, 0xc4, 0x04);
+ ret = cx24120_writereg(state, 0xce, 0x00);
+ ret = cx24120_writereg(state, 0xcf, 0x00);
+ ret_EA = cx24120_readreg(state, 0xea) & 0xfe;
+ ret = cx24120_writereg(state, 0xea, ret_EA);
+ ret = cx24120_writereg(state, 0xeb, 0x0c);
+ ret = cx24120_writereg(state, 0xec, 0x06);
+ ret = cx24120_writereg(state, 0xed, 0x05);
+ ret = cx24120_writereg(state, 0xee, 0x03);
+ ret = cx24120_writereg(state, 0xef, 0x05);
+ ret = cx24120_writereg(state, 0xf3, 0x03);
+ ret = cx24120_writereg(state, 0xf4, 0x44);
+
+ for (reg1 = 0xf0; reg1 < 0xf3; reg1++) {
+ cx24120_writereg(state, reg1, 0x04);
+ cx24120_writereg(state, reg1 - 10, 0x02);
+ }
+
+ ret = cx24120_writereg(state, 0xea, (ret_EA | 0x01));
+ for (reg1 = 0xc5; reg1 < 0xcb; reg1 += 2) {
+ ret = cx24120_writereg(state, reg1, 0x00);
+ ret = cx24120_writereg(state, reg1 + 1, 0x00);
+ }
+
+ ret = cx24120_writereg(state, 0xe4, 0x03);
+ ret = cx24120_writereg(state, 0xeb, 0x0a);
+
+ dev_dbg(&state->i2c->dev,
+ "%s: Requesting firmware (%s) to download...\n",
+ __func__, CX24120_FIRMWARE);
+
+ ret = state->config->request_firmware(fe, &fw, CX24120_FIRMWARE);
+ if (ret) {
+ err("Could not load firmware (%s): %d\n",
+ CX24120_FIRMWARE, ret);
+ return ret;
+ }
+
+ dev_dbg(&state->i2c->dev,
+ "%s: Firmware found, size %d bytes (%02x %02x .. %02x %02x)\n",
+ __func__,
+ (int)fw->size, /* firmware_size in bytes */
+ fw->data[0], /* fw 1st byte */
+ fw->data[1], /* fw 2d byte */
+ fw->data[fw->size - 2], /* fw before last byte */
+ fw->data[fw->size - 1]); /* fw last byte */
+
+ ret = cx24120_test_rom(state);
+ ret = cx24120_readreg(state, 0xfb) & 0xfe;
+ ret = cx24120_writereg(state, 0xfb, ret);
+ ret = cx24120_writereg(state, 0xe0, 0x76);
+ ret = cx24120_writereg(state, 0xf7, 0x81);
+ ret = cx24120_writereg(state, 0xf8, 0x00);
+ ret = cx24120_writereg(state, 0xf9, 0x00);
+ ret = cx24120_writeregN(state, 0xfa, fw->data, (fw->size - 1), 0x00);
+ ret = cx24120_writereg(state, 0xf7, 0xc0);
+ ret = cx24120_writereg(state, 0xe0, 0x00);
+ ret = (fw->size - 2) & 0x00ff;
+ ret = cx24120_writereg(state, 0xf8, ret);
+ ret = ((fw->size - 2) >> 8) & 0x00ff;
+ ret = cx24120_writereg(state, 0xf9, ret);
+ ret = cx24120_writereg(state, 0xf7, 0x00);
+ ret = cx24120_writereg(state, 0xdc, 0x00);
+ ret = cx24120_writereg(state, 0xdc, 0x07);
+ msleep(500);
+
+ /* Check final byte matches final byte of firmware */
+ ret = cx24120_readreg(state, 0xe1);
+ if (ret == fw->data[fw->size - 1]) {
+ dev_dbg(&state->i2c->dev,
+ "%s: Firmware uploaded successfully\n",
+ __func__);
+ reset_result = 0;
+ } else {
+ err("Firmware upload failed. Last byte returned=0x%x\n", ret);
+ reset_result = -EREMOTEIO;
+ }
+ ret = cx24120_writereg(state, 0xdc, 0x00);
+ release_firmware(fw);
+ if (reset_result != 0)
+ return reset_result;
+
+
+ /* Start tuner */
+ cmd.id = CMD_START_TUNER;
+ cmd.len = 3;
+ cmd.arg[0] = 0x00;
+ cmd.arg[1] = 0x00;
+ cmd.arg[2] = 0x00;
+
+ if (cx24120_message_send(state, &cmd) != 0) {
+ err("Error tuner start! :(\n");
+ return -EREMOTEIO;
+ }
+
+ /* Set VCO */
+ inv_vco = cx24120_calculate_vco(state);
+
+ cmd.id = CMD_VCO_SET;
+ cmd.len = 12;
+ cmd.arg[0] = 0x06;
+ cmd.arg[1] = 0x2b;
+ cmd.arg[2] = 0xd8;
+ cmd.arg[3] = (inv_vco >> 8) & 0xff;
+ cmd.arg[4] = (inv_vco) & 0xff;
+ cmd.arg[5] = 0x03;
+ cmd.arg[6] = 0x9d;
+ cmd.arg[7] = 0xfc;
+ cmd.arg[8] = 0x06;
+ cmd.arg[9] = 0x03;
+ cmd.arg[10] = 0x27;
+ cmd.arg[11] = 0x7f;
+
+ if (cx24120_message_send(state, &cmd)) {
+ err("Error set VCO! :(\n");
+ return -EREMOTEIO;
+ }
+
+
+ /* set bandwidth */
+ cmd.id = CMD_BANDWIDTH;
+ cmd.len = 12;
+ cmd.arg[0] = 0x00;
+ cmd.arg[1] = 0x00;
+ cmd.arg[2] = 0x00;
+ cmd.arg[3] = 0x00;
+ cmd.arg[4] = 0x05;
+ cmd.arg[5] = 0x02;
+ cmd.arg[6] = 0x02;
+ cmd.arg[7] = 0x00;
+ cmd.arg[8] = 0x05;
+ cmd.arg[9] = 0x02;
+ cmd.arg[10] = 0x02;
+ cmd.arg[11] = 0x00;
+
+ if (cx24120_message_send(state, &cmd)) {
+ err("Error set bandwidth!\n");
+ return -EREMOTEIO;
+ }
+
+ ret = cx24120_readreg(state, 0xba);
+ if (ret > 3) {
+ dev_dbg(&state->i2c->dev, "%s: Reset-readreg 0xba: %x\n",
+ __func__, ret);
+ err("Error initialising tuner!\n");
+ return -EREMOTEIO;
+ }
+
+ dev_dbg(&state->i2c->dev, "%s: Tuner initialised correctly.\n",
+ __func__);
+
+
+ /* Initialise mpeg outputs */
+ ret = cx24120_writereg(state, 0xeb, 0x0a);
+ if (cx24120_msg_mpeg_output_global_config(state, 0) ||
+ cx24120_msg_mpeg_output_config(state, 0) ||
+ cx24120_msg_mpeg_output_config(state, 1) ||
+ cx24120_msg_mpeg_output_config(state, 2)) {
+ err("Error initialising mpeg output. :(\n");
+ return -EREMOTEIO;
+ }
+
+
+ /* ???? */
+ cmd.id = CMD_TUNER_INIT;
+ cmd.len = 3;
+ cmd.arg[0] = 0x00;
+ cmd.arg[1] = 0x10;
+ cmd.arg[2] = 0x10;
+ if (cx24120_message_send(state, &cmd)) {
+ err("Error sending final init message. :(\n");
+ return -EREMOTEIO;
+ }
+
+
+ /* Firmware CMD 35: Get firmware version */
+ cmd.id = CMD_FWVERSION;
+ cmd.len = 1;
+ for (i = 0; i < 4; i++) {
+ cmd.arg[0] = i;
+ ret = cx24120_message_send(state, &cmd);
+ if (ret != 0)
+ return ret;
+ vers[i] = cx24120_readreg(state, CX24120_REG_MAILBOX);
+ }
+ info("FW version %i.%i.%i.%i\n", vers[0], vers[1], vers[2], vers[3]);
+
+
+ state->cold_init = 1;
+ return 0;
+}
+
+
+static int cx24120_tune(struct dvb_frontend *fe, bool re_tune,
+ unsigned int mode_flags, unsigned int *delay, fe_status_t *status)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+ int ret;
+
+ dev_dbg(&state->i2c->dev, "%s(%d)\n", __func__, re_tune);
+
+ /* TODO: Do we need to set delay? */
+
+ if (re_tune) {
+ ret = cx24120_set_frontend(fe);
+ if (ret)
+ return ret;
+ }
+
+ return cx24120_read_status(fe, status);
+}
+
+
+
+static int cx24120_get_algo(struct dvb_frontend *fe)
+{
+ return DVBFE_ALGO_HW;
+}
+
+
+static int cx24120_sleep(struct dvb_frontend *fe)
+{
+ return 0;
+}
+
+
+/*static int cx24120_wakeup(struct dvb_frontend *fe)
+ * {
+ * return 0;
+ * }
+*/
+
+
+static int cx24120_get_frontend(struct dvb_frontend *fe)
+{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ struct cx24120_state *state = fe->demodulator_priv;
+ u8 freq1, freq2, freq3;
+
+ dev_dbg(&state->i2c->dev, "%s()", __func__);
+
+ /* don't return empty data if we're not tuned in */
+ if (state->mpeg_enabled)
+ return 0;
+
+ /* Get frequency */
+ freq1 = cx24120_readreg(state, CX24120_REG_FREQ1);
+ freq2 = cx24120_readreg(state, CX24120_REG_FREQ2);
+ freq3 = cx24120_readreg(state, CX24120_REG_FREQ3);
+ c->frequency = (freq3 << 16) | (freq2 << 8) | freq1;
+ dev_dbg(&state->i2c->dev, "%s frequency = %d\n", __func__,
+ c->frequency);
+
+ /* Get modulation, fec, pilot */
+ cx24120_get_fec(fe);
+
+ return 0;
+}
+
+
+static void cx24120_release(struct dvb_frontend *fe)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+
+ dev_dbg(&state->i2c->dev, "%s: Clear state structure\n", __func__);
+ kfree(state);
+}
+
+
+static int cx24120_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ struct cx24120_state *state = fe->demodulator_priv;
+
+ *ucblocks = (cx24120_readreg(state, CX24120_REG_UCB_H) << 8) |
+ cx24120_readreg(state, CX24120_REG_UCB_L);
+
+ dev_dbg(&state->i2c->dev, "%s: Blocks = %d\n",
+ __func__, *ucblocks);
+ return 0;
+}
+
+
+static struct dvb_frontend_ops cx24120_ops = {
+ .delsys = { SYS_DVBS, SYS_DVBS2 },
+ .info = {
+ .name = "Conexant CX24120/CX24118",
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_stepsize = 1011, /* kHz for QPSK frontends */
+ .frequency_tolerance = 5000,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+ FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_2G_MODULATION |
+ FE_CAN_QPSK | FE_CAN_RECOVER
+ },
+ .release = cx24120_release,
+
+ .init = cx24120_init,
+ .sleep = cx24120_sleep,
+
+ .tune = cx24120_tune,
+ .get_frontend_algo = cx24120_get_algo,
+ .set_frontend = cx24120_set_frontend,
+
+ .get_frontend = cx24120_get_frontend,
+ .read_status = cx24120_read_status,
+ .read_ber = cx24120_read_ber,
+ .read_signal_strength = cx24120_read_signal_strength,
+ .read_snr = cx24120_read_snr,
+ .read_ucblocks = cx24120_read_ucblocks,
+
+ .diseqc_send_master_cmd = cx24120_send_diseqc_msg,
+
+ .diseqc_send_burst = cx24120_diseqc_send_burst,
+ .set_tone = cx24120_set_tone,
+ .set_voltage = cx24120_set_voltage,
+};
+
+MODULE_DESCRIPTION("DVB Frontend module for Conexant CX24120/CX24118 hardware");
+MODULE_AUTHOR("Jemma Denson");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb-frontends/cx24120.h b/drivers/media/dvb-frontends/cx24120.h
new file mode 100644
index 000000000000..9a394d4c70e4
--- /dev/null
+++ b/drivers/media/dvb-frontends/cx24120.h
@@ -0,0 +1,56 @@
+/*
+ * Conexant CX24120/CX24118 - DVB-S/S2 demod/tuner driver
+ *
+ * Copyright (C) 2008 Patrick Boettcher <pb@linuxtv.org>
+ * Copyright (C) 2009 Sergey Tyurin <forum.free-x.de>
+ * Updated 2012 by Jannis Achstetter <jannis_achstetter@web.de>
+ * Copyright (C) 2015 Jemma Denson <jdenson@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef CX24120_H
+#define CX24120_H
+
+#include <linux/kconfig.h>
+#include <linux/dvb/frontend.h>
+#include <linux/firmware.h>
+
+struct cx24120_initial_mpeg_config {
+ u8 x1;
+ u8 x2;
+ u8 x3;
+};
+
+struct cx24120_config {
+ u8 i2c_addr;
+ u32 xtal_khz;
+ struct cx24120_initial_mpeg_config initial_mpeg_config;
+
+ int (*request_firmware)(struct dvb_frontend *fe,
+ const struct firmware **fw, char *name);
+};
+
+#if IS_REACHABLE(CONFIG_DVB_CX24120)
+extern struct dvb_frontend *cx24120_attach(
+ const struct cx24120_config *config,
+ struct i2c_adapter *i2c);
+#else
+static inline struct dvb_frontend *cx24120_attach(
+ const struct cx24120_config *config,
+ struct i2c_adapter *i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
+#endif /* CX24120_H */
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 14:55:22 +0100