diff options
| -rw-r--r-- | drivers/mmc/host/sdhci-esdhc-imx.c | 44 |
1 files changed, 41 insertions, 3 deletions
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 4dc0028086a3..4557aa1567a5 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -34,6 +34,14 @@ #define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002 /* + * There is an INT DMA ERR mis-match between eSDHC and STD SDHC SPEC: + * Bit25 is used in STD SPEC, and is reserved in fsl eSDHC design, + * but bit28 is used as the INT DMA ERR in fsl eSDHC design. + * Define this macro DMA error INT for fsl eSDHC + */ +#define SDHCI_INT_VENDOR_SPEC_DMA_ERR 0x10000000 + +/* * The CMDTYPE of the CMD register (offset 0xE) should be set to * "11" when the STOP CMD12 is issued on imx53 to abort one * open ended multi-blk IO. Otherwise the TC INT wouldn't @@ -135,6 +143,27 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) val |= SDHCI_CARD_PRESENT; } + if (unlikely(reg == SDHCI_CAPABILITIES)) { + /* In FSL esdhc IC module, only bit20 is used to indicate the + * ADMA2 capability of esdhc, but this bit is messed up on + * some SOCs (e.g. on MX25, MX35 this bit is set, but they + * don't actually support ADMA2). So set the BROKEN_ADMA + * uirk on MX25/35 platforms. + */ + + if (val & SDHCI_CAN_DO_ADMA1) { + val &= ~SDHCI_CAN_DO_ADMA1; + val |= SDHCI_CAN_DO_ADMA2; + } + } + + if (unlikely(reg == SDHCI_INT_STATUS)) { + if (val & SDHCI_INT_VENDOR_SPEC_DMA_ERR) { + val &= ~SDHCI_INT_VENDOR_SPEC_DMA_ERR; + val |= SDHCI_INT_ADMA_ERROR; + } + } + return val; } @@ -179,6 +208,13 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg) writel(v, host->ioaddr + SDHCI_VENDOR_SPEC); } + if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) { + if (val & SDHCI_INT_ADMA_ERROR) { + val &= ~SDHCI_INT_ADMA_ERROR; + val |= SDHCI_INT_VENDOR_SPEC_DMA_ERR; + } + } + writel(val, host->ioaddr + reg); } @@ -311,9 +347,10 @@ static struct sdhci_ops sdhci_esdhc_ops = { }; static struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { - .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA + .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_HISPD_BIT + | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC + | SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC | SDHCI_QUIRK_BROKEN_CARD_DETECTION, - /* ADMA has issues. Might be fixable */ .ops = &sdhci_esdhc_ops, }; @@ -405,7 +442,8 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev) if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data)) /* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */ - host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK; + host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK + | SDHCI_QUIRK_BROKEN_ADMA; if (is_imx53_esdhc(imx_data)) imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT; |