diff options
-rw-r--r-- | arch/i386/kernel/io_apic.c | 147 |
1 files changed, 112 insertions, 35 deletions
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index fb3991e8229e..cc5d7ac5b2e7 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -46,6 +46,9 @@ int (*ioapic_renumber_irq)(int ioapic, int irq); atomic_t irq_mis_count; +/* Where if anywhere is the i8259 connect in external int mode */ +static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; + static DEFINE_SPINLOCK(ioapic_lock); /* @@ -738,7 +741,7 @@ static int find_irq_entry(int apic, int pin, int type) /* * Find the pin to which IRQ[irq] (ISA) is connected */ -static int find_isa_irq_pin(int irq, int type) +static int __init find_isa_irq_pin(int irq, int type) { int i; @@ -758,6 +761,33 @@ static int find_isa_irq_pin(int irq, int type) return -1; } +static int __init find_isa_irq_apic(int irq, int type) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + int lbus = mp_irqs[i].mpc_srcbus; + + if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || + mp_bus_id_to_type[lbus] == MP_BUS_EISA || + mp_bus_id_to_type[lbus] == MP_BUS_MCA || + mp_bus_id_to_type[lbus] == MP_BUS_NEC98 + ) && + (mp_irqs[i].mpc_irqtype == type) && + (mp_irqs[i].mpc_srcbusirq == irq)) + break; + } + if (i < mp_irq_entries) { + int apic; + for(apic = 0; apic < nr_ioapics; apic++) { + if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) + return apic; + } + } + + return -1; +} + /* * Find a specific PCI IRQ entry. * Not an __init, possibly needed by modules @@ -1253,7 +1283,7 @@ static void __init setup_IO_APIC_irqs(void) /* * Set up the 8259A-master output pin: */ -static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector) +static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) { struct IO_APIC_route_entry entry; unsigned long flags; @@ -1287,8 +1317,8 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector) * Add it to the IO-APIC irq-routing table: */ spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1)); - io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0)); + io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); + io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); spin_unlock_irqrestore(&ioapic_lock, flags); enable_8259A_irq(0); @@ -1595,7 +1625,8 @@ void /*__init*/ print_PIC(void) static void __init enable_IO_APIC(void) { union IO_APIC_reg_01 reg_01; - int i; + int i8259_apic, i8259_pin; + int i, apic; unsigned long flags; for (i = 0; i < PIN_MAP_SIZE; i++) { @@ -1609,11 +1640,52 @@ static void __init enable_IO_APIC(void) /* * The number of IO-APIC IRQ registers (== #pins): */ - for (i = 0; i < nr_ioapics; i++) { + for (apic = 0; apic < nr_ioapics; apic++) { spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(i, 1); + reg_01.raw = io_apic_read(apic, 1); spin_unlock_irqrestore(&ioapic_lock, flags); - nr_ioapic_registers[i] = reg_01.bits.entries+1; + nr_ioapic_registers[apic] = reg_01.bits.entries+1; + } + for(apic = 0; apic < nr_ioapics; apic++) { + int pin; + /* See if any of the pins is in ExtINT mode */ + for(pin = 0; pin < nr_ioapic_registers[i]; pin++) { + struct IO_APIC_route_entry entry; + spin_lock_irqsave(&ioapic_lock, flags); + *(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin); + *(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin); + spin_unlock_irqrestore(&ioapic_lock, flags); + + + /* If the interrupt line is enabled and in ExtInt mode + * I have found the pin where the i8259 is connected. + */ + if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { + ioapic_i8259.apic = apic; + ioapic_i8259.pin = pin; + goto found_i8259; + } + } + } + found_i8259: + /* Look to see what if the MP table has reported the ExtINT */ + /* If we could not find the appropriate pin by looking at the ioapic + * the i8259 probably is not connected the ioapic but give the + * mptable a chance anyway. + */ + i8259_pin = find_isa_irq_pin(0, mp_ExtINT); + i8259_apic = find_isa_irq_apic(0, mp_ExtINT); + /* Trust the MP table if nothing is setup in the hardware */ + if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { + printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); + ioapic_i8259.pin = i8259_pin; + ioapic_i8259.apic = i8259_apic; + } + /* Complain if the MP table and the hardware disagree */ + if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && + (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) + { + printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); } /* @@ -1627,7 +1699,6 @@ static void __init enable_IO_APIC(void) */ void disable_IO_APIC(void) { - int pin; /* * Clear the IO-APIC before rebooting: */ @@ -1638,8 +1709,7 @@ void disable_IO_APIC(void) * Put that IOAPIC in virtual wire mode * so legacy interrupts can be delivered. */ - pin = find_isa_irq_pin(0, mp_ExtINT); - if (pin != -1) { + if (ioapic_i8259.pin != -1) { struct IO_APIC_route_entry entry; unsigned long flags; @@ -1650,7 +1720,7 @@ void disable_IO_APIC(void) entry.polarity = 0; /* High */ entry.delivery_status = 0; entry.dest_mode = 0; /* Physical */ - entry.delivery_mode = 7; /* ExtInt */ + entry.delivery_mode = dest_ExtINT; /* ExtInt */ entry.vector = 0; entry.dest.physical.physical_dest = 0; @@ -1659,11 +1729,13 @@ void disable_IO_APIC(void) * Add it to the IO-APIC irq-routing table: */ spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1)); - io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0)); + io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin, + *(((int *)&entry)+1)); + io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin, + *(((int *)&entry)+0)); spin_unlock_irqrestore(&ioapic_lock, flags); } - disconnect_bsp_APIC(pin != -1); + disconnect_bsp_APIC(ioapic_i8259.pin != -1); } /* @@ -2113,20 +2185,21 @@ static void setup_nmi (void) */ static inline void unlock_ExtINT_logic(void) { - int pin, i; + int apic, pin, i; struct IO_APIC_route_entry entry0, entry1; unsigned char save_control, save_freq_select; unsigned long flags; - pin = find_isa_irq_pin(8, mp_INT); + pin = find_isa_irq_pin(8, mp_INT); + apic = find_isa_irq_apic(8, mp_INT); if (pin == -1) return; spin_lock_irqsave(&ioapic_lock, flags); - *(((int *)&entry0) + 1) = io_apic_read(0, 0x11 + 2 * pin); - *(((int *)&entry0) + 0) = io_apic_read(0, 0x10 + 2 * pin); + *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin); + *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin); spin_unlock_irqrestore(&ioapic_lock, flags); - clear_IO_APIC_pin(0, pin); + clear_IO_APIC_pin(apic, pin); memset(&entry1, 0, sizeof(entry1)); @@ -2139,8 +2212,8 @@ static inline void unlock_ExtINT_logic(void) entry1.vector = 0; spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry1) + 1)); - io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry1) + 0)); + io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1)); + io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0)); spin_unlock_irqrestore(&ioapic_lock, flags); save_control = CMOS_READ(RTC_CONTROL); @@ -2158,11 +2231,11 @@ static inline void unlock_ExtINT_logic(void) CMOS_WRITE(save_control, RTC_CONTROL); CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); - clear_IO_APIC_pin(0, pin); + clear_IO_APIC_pin(apic, pin); spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry0) + 1)); - io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry0) + 0)); + io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1)); + io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0)); spin_unlock_irqrestore(&ioapic_lock, flags); } @@ -2174,7 +2247,7 @@ static inline void unlock_ExtINT_logic(void) */ static inline void check_timer(void) { - int pin1, pin2; + int apic1, pin1, apic2, pin2; int vector; /* @@ -2196,10 +2269,13 @@ static inline void check_timer(void) timer_ack = 1; enable_8259A_irq(0); - pin1 = find_isa_irq_pin(0, mp_INT); - pin2 = find_isa_irq_pin(0, mp_ExtINT); + pin1 = find_isa_irq_pin(0, mp_INT); + apic1 = find_isa_irq_apic(0, mp_INT); + pin2 = ioapic_i8259.pin; + apic2 = ioapic_i8259.apic; - printk(KERN_INFO "..TIMER: vector=0x%02X pin1=%d pin2=%d\n", vector, pin1, pin2); + printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", + vector, apic1, pin1, apic2, pin2); if (pin1 != -1) { /* @@ -2216,8 +2292,9 @@ static inline void check_timer(void) clear_IO_APIC_pin(0, pin1); return; } - clear_IO_APIC_pin(0, pin1); - printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to IO-APIC\n"); + clear_IO_APIC_pin(apic1, pin1); + printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to " + "IO-APIC\n"); } printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... "); @@ -2226,13 +2303,13 @@ static inline void check_timer(void) /* * legacy devices should be connected to IO APIC #0 */ - setup_ExtINT_IRQ0_pin(pin2, vector); + setup_ExtINT_IRQ0_pin(apic2, pin2, vector); if (timer_irq_works()) { printk("works.\n"); if (pin1 != -1) - replace_pin_at_irq(0, 0, pin1, 0, pin2); + replace_pin_at_irq(0, apic1, pin1, apic2, pin2); else - add_pin_to_irq(0, 0, pin2); + add_pin_to_irq(0, apic2, pin2); if (nmi_watchdog == NMI_IO_APIC) { setup_nmi(); } @@ -2241,7 +2318,7 @@ static inline void check_timer(void) /* * Cleanup, just in case ... */ - clear_IO_APIC_pin(0, pin2); + clear_IO_APIC_pin(apic2, pin2); } printk(" failed.\n"); |